new holland maintenance inspection · pdf filenew holland maintenance inspection checklist...

W.O. # _____________________________________________DATE _______________________________________________MODEL ____________________________________________TECHNICIAN SIGNATURE ______________________________P.I.N. _________________________ HOURS ______________

CUSTOMER NAME ____________________________________ ADDRESS ___________________________________________CITY, STATE, ZIP _____________________________________PHONE _____________________________________________CUSTOMER SIGNATURE _______________________________

CX COMBINE INSPECTION

PM-14367Rev 3/09

NEW HOLLAND MAINTENANCE INSPECTION CHECKLISTITEM # COMMENTS

Safety equipment1. Seat Belt2. Warning/Flashers, turn signals, 3. Decals, SMV4. Horn, back-up alarm5. Turn brakes and pedal interlock6. Feeder lift safety lock7. All shields in place8. Reflectors9. Mirrors

Lubrication LeveLS10. Engine oil11. Transmission oil12. Hydraulic oil13. Brake fluid14. Final drives15. Hydraulic reverser gearbox16. Rear wheel assist gearbox17. PTO gearbox

Straw eLevator18. Feeder drum, stops, pivots, bearings,

and seal19. Feeder chain, slats, and links20. Feeder chain tension21. Feeder overload clutch22. Upper sprockets, strippers, and

bearings23. Feeder drive belt, pulley, chain,

and sprockets24. Header jackshaft belt, pulley & bearings25. Feeder housing floor26. Feeder door seal27. Stone trap door condition & seals

threShing & Separation28. Drum – condition29. Drum concave – condition30. Drum concave clearance – front31. Drum concave clearance – rear32. Concave parallel to drum33. Drum speed reduction gearbox & bolt

(if equipped)34. De-awning plates – condition/

adjustment35. Rasp bars (if equipped)36. Beater – condition37. Beater wear plate condition &

adjustment (if equipped)38. Beater belt – condition & tension39. Rotary separator, pulley & bearings40. Rotary separator belt – condition & tension41. Straw flow beater42. Straw retarding curtain43. Straw walkers, bearings & drive

SieveS & grain pan44. Presieve – cracks/warpage/

adjustment45. Upper sieve – cracks/warpage/

adjustment46. Lower sieve – cracks/warpage/

adjustment47. Hanger bushings48. Shaker drive belts, pulleys & bearings49. Front and side seals50. Grain pan condition

cLeaning fan51. Drive belts, pulleys & bearings52. Fan blades – conditions/cracks53. Drive pulley – wear, not loose54. Variable hub (clean) and thrust

bearing

Straw waLkerS55. Drive belt, pulleys & tensioner56. Hubs, shaft & bearings57. Grate-cracks, wear & pan adjustment

returnS SyStem58. Shoe drive gearboxes, shafts,

belts & couplers59. Returns cross auger(s) bearings,

tube & covers60. Returns cross auger(s) flighting –

cracks, bending61. Returns cross auger(s) belt, pulley &

tension (LH & RH)62. Returns auger bearings, tube and

covers63. Returns auger flighting – cracks,

bending64. Returns auger belt, pulley & tension65. Returns drive gearbox & slip clutch66. Roto-thresher

grain Storage/unLoading67. Clean grain auger bearings,

flighting and drive68. Clean grain auger trough – damage69. Clean grain elevator chain, paddles

and sprockets

grain Storage/unLoading (cont.)70. Clean grain elevator bearings, drive

chain, sprockets & slip clutch71. Unloading drive sprockets, belts,

chains and bearings72. Unloading gearbox, bearings,

couplers and gears73. Pivot movement & wear74. Shearbolt – installation & spares

at hand75. Grain tank inspection door & window76. Grain tank – leaks77. Grain tank extensions (if equipped)

Straw Spreader/chopper and chaff Spreader78. Straw chopper knive and

hardware condition79. Straw chopper rotor, bearings,

pulley and engagement clutch80. Counter knives – condition and

adjustment81. Shred bar – condition & hardware82. Spreader chute – condition &

adjustment83. Spread dividers – condition &

adjustment (LH & RH)84. Chaff blower (if installed)

A B C S A B C S A B C SA B C S

A CrITICAL – MuST rEPAIr

B OPErATIONAL – SIgNS Of WEAr

C OK

S PASSED INSPECTION - SErvICE PrOvIDED

This information is only for the purpose of suggesting possible repair or treatment of equipment. Any remedy will be limited to the amount of the inspection fee. Dealer makes no expressed or implied warranties, and disclaims any incidental or consequential damages.

1 of 2

W.O. # _____________________________________________DATE _______________________________________________MODEL ____________________________________________TECHNICIAN SIGNATURE ______________________________P.I.N. _________________________ HOURS ______________

CUSTOMER NAME ____________________________________ ADDRESS ___________________________________________CITY, STATE, ZIP _____________________________________PHONE _____________________________________________CUSTOMER SIGNATURE _______________________________

CX COMBINE INSPECTIONNEW HOLLAND MAINTENANCE INSPECTION CHECKLIST

ITEM # COMMENTS

engine85. Coolant level, protectant level ___________°F/C (specify)86. Radiator cap & recovery bottle87. Radiator fan & drive bearings88. Hoses and connections89. Fuel leaks90. Oil leaks, engine front/rear/ head gasket leaks91. Radiator, oil cooler, A/C condenser, & rotary air screen – clean92. Air leaks, seal at rotary screen door, radiator and inner vane93. Fuel tank, fuel cap, and fuel filter94. Drain fuel system water separator95. Turbo, oil seepage, missing vanes96. Air cleaner, dents, seals, aspirator obstructions97. Air cleaner outer & inner filter element98. Air restriction indicator99. Manifold & muffler leaks/cracks100. Belts – wear/tension/alignment101. Damper pulley condition

hydrauLicS SyStem102. Leaks: fittings, hoses, rod seals, packings103. Pump drive belts and hoses104. Pump mounting

hydroStatic drive105. Drive couplings & hoses106. Final drive bolts at axle – loose/broken

hydroStatic drive (cont.)107. Final drive axle bearing free play108. Final drive seal condition

wheeLS109. Rear axle hub torque, leaks110. Front/rear tire inflation111. Front/rear wheel bolt torque112. Rear wheel toe-in113. Rear axle pivot wear/cracks

eLectricaL SyStem114. Battery voltage________ volts115. Charging system________ volts116. Battery electrolyte level (or sealed)117. Battery posts, cables, and

clamps – clean118. Wiring harness condition/routing119. Grain tank sensors

cab120. Door: operation, seals, latches121. Window: operation, seals, latches122. Seat condition & adjustments123. Rear view mirrors condition &

adjustments124. Sun visor125. Steering wheel & column: adjustments126. Park brake127. Gearshift & propulsion control128. Switches

operationaL (ignition on/engine off)129. Exterior lights130. Interior lights131. Flashers & directional signals132. Instruments, gauges & warning lights

operationaL (ignition on/engine off – cont.)133. Radio/cassette134. Cigarette lighter135. Powered rear axle engagement136. Grain loss monitor – shoe walkers137. MFH neutral safety switch

operationaL (engine running/threSher off)138. Ignition, engine start and stop

switch139. Header stubble height (manual &

compensation control)140. Automatics engage switch141. Header self-diagnostic control LED’s142. Heater/air conditioning143. Engine coolant temp gauge

operationaL (engine running/threSher on)144. Engine low idle_________rpm,

high____________rpm145. Header engagement146. Threshing engagement147. Concave adjustment148. Unloader auger engagement &

swing (manual/auto)149. Feeder reverser150. Reel speed +/-151. Cleaning fan speed +/-152. Head – raise/lower – fast/slow153. Head tilt – left/right

operationaL (engine running/threSher on – cont.)154. Reel – raise/lower155. Threshing drum speed +/-156. Infoview – check, investigate and

clear error codes

miSceLLaneouS157. External condition158. Tire condition/wear/tread159. Operator’s manual160. Fire extinguisher161. Other:____________________162. Other:____________________

additionaL maintenance (if required)163. Engine valve lash adjustment164. Fuel injector condition, pop-off

pressure165. Lubricate grease points166. Lube, coolant & filters: change per

maintenance schedule (reference Operator’s Manual)

167. Engine oil fluid analysis168. Hydraulic oil fluid analysis169. Final drive fluid analysis170. Coolant fluid analysis

A B C S A B C S A B C S A B C S

A CrITICAL – MuST rEPAIr

B OPErATIONAL – SIgNS Of WEAr

C OK

S PASSED INSPECTION - SErvICE PrOvIDED

PM-14367Rev 3/09

This information is only for the purpose of suggesting possible repair or treatment of equipment. Any remedy will be limited to the amount of the inspection fee. Dealer makes no expressed or implied warranties, and disclaims any incidental or consequential damages.

2 of 2