maxxforce egr cooler shield boost your drive time

EGR Cooler Shield

For 2008 to 2013 13 L Maxxforce Engines

Boost Your Drive Time

• Problem EGR Cooler Failure• Solution Patent Pending Thermal Screen• Benefits Longer life for EGR cooler• Investment $195 in parts

• Contact details and links on the last page

Problem: If you own an International with a 2008 to 2013 Maxxforce 13L engine…you have probably had an EGR cooler failure.Some EGR failures are due to thermal fatigue….

Solution: A shield (patent pending), is available which fits between the EGR Valve and the EGR cooler. It prevents direct impingement of hot gas on critical surfaces of the EGR Cooler face.

EGR Valve EGR Cooler

Adding this shield reduces the cooler face temperature variations and increases the fatigue life of the cooler by 50+% as measured on a rig test.

Shield Fits here

Gas Flow

Benefits

• Tests have been conducted on a special purpose test bench

• EGR Coolers were tested with and without the thermal shield

• The results demonstrate that a customer can expect a 50+% increase in thermal fatigue life for the cooler.

• This life increase will save you money, keeping you on the road longer between visits to the dealer.

• By fitting this shield ($195), you could extend the life of a new cooler or even a current cooler.

• Please contact us for details and questions• See the technical presentations from us too

– @coolershield on twitter

– EGR Cooler Shield on Facebook

– egrcoolershield@gmail.com

Cost and Contact Info

10 June 2015