lenton plus

LENTON PLUS Features LENTON PLUS splicing

system is designed to break the reinforcing bar remote from the rebar connector

LENTON PLUS TERMINATOR (D16) Pre-Qualified by various DOTs for use as a Headed Bar Reinforcement and meets the requirements of ACI 318, ASTM A970and AC 347

LENTON PLUS is availablein Standard (A12),Position (P14L), and LENTON TERMINATOR(D16) styles, and otherLENTON styles uponrequest

LENTON PLUS splicingsystem meets or exceedsbuilding code andDepartment of Transporta-tion requirements. Thisincludes but is not limitedto CalTrans Ultimate, ACI 318 TYPE 2, UBCTYPE 2, IBC, ACI 349,ACI 359, AASHTO, USArmy Corp of Engineers,ASTM A970, BS8110, DIN1045 and AC 133 amongothers.

U.S. Patent No. 6,880,224

Project References

Fantasy Harbour BridgeMyrtle Beach, SC USA

Galena Creek Reno, NV USA

Marmaray TunnelIstanbul, Turkey

Santa Clara River BridgeOxnard, CA USA

Sellafield BNFLSeascale, UK

Tacoma Narrows BridgeTacoma, WA USA

ERICO, the manufacturer of the patented and widely accepted LENTON

mechanical rebar splicing system, alsooffers the LENTON PLUS splicing system.This system addresses critical demand applications where the mechanical rebar connector is required (by designparameters) to force failure into the parent reinforcing bar remote of the rebarconnector. This most stringent connectordemand is defined by some StateDepartments of Transportation (DOT) asthe Ultimate rebar splicing classification.

The LENTON PLUS system utilizes thesame proven traditional LENTON taperthreaded concept, but with a slight twist.Prior to placing a LENTON taper threadonto a bar end, the rebar is straightened(cold worked) with a specially designedhydraulic tool. The slightly reconfiguredbar end is then placed into a standardLENTON threading machine and a tradi-tional LENTON taper thread is machinedonto the rebar.

The LENTON PLUS process works in con-junction with the LENTON PLUS standard(A12) coupler, the LENTON PLUS Position(P14L) coupler, and with the LENTONPLUS TERMINATOR (D16). While theLENTON PLUS standard and position couplers are designed to mechanicallyconnect two reinforcing bars together,the LENTON PLUS TERMINATOR (D16)

LENTON PLUS Mechanical Rebar SplicingSystem Achieves Bar Break Remote

is designed for headed bar reinforcementapplications.

LENTON PLUS has been pre-qualified byvarious Departments of Transportationas an Ultimate rebar splicing system. In addition, LENTON PLUS TERMINATOR(D16) is pre-qualified as a Headed BarReinforcement (end anchor) and meetsthe requirements of the current ASTMA970.

The LENTON PLUS (A12/P14L) andLENTON PLUS TERMINATOR (D16) are an extension to the existing ERICOmechanical rebar splicing systems andheaded anchors. The traditional LENTON(A2/P9) rebar splicing system and theLENTON TERMINATOR (D6) anchors, areboth listed in current ICC ER-3967, as aTYPE 2 seismic connector/anchor. The newLENTON PLUS rebar splicing and LENTONPLUS TERMINATOR (D16) are designed tooffer Engineers and Contractors, whenrequired, an Ultimate bar break remotesplicing option.

ERICO has experienced staff andresources available to help you select asplicing or anchor system to meet yourneeds. Contact your local representativefor independent testing data, productsamples, availability or to discuss specificapplications.

Pre-Qualifi

ed as

an Ultimat

e Rebar

Connector

C473S-WWEN C1771LT06WWEN 0025M8

Phone: 800-248-2677www.erico.com

For a copy of ICC ES ER-3967 or information on how to specify the LENTON PLUS Rebar Splicing System visit www.erico.com

AASHTO is a registered trademark of American Association of State Highway and Transportation Officials. ACI is a registered trademark of American Concrete Institute. ASTM is a registered trademark of ASTM International.IBC and ICC are a registered trademarks of International Code Council. UBC is a registered trademark of International Conference of Building Officials.

WARNING ERICO products shall be installed and used only as indicated in ERICOs product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service representative.Improper installation, misuse, misapplication or other failure to completely follow ERICOs instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.

Copyright 2007 ERICO International Corporation. All rights reserved.CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.

LENTON PLUS

Rebar Size Designation Part A B D WtIn-Lb Metric Canadian Soft Metric Number in mm in mm in mm lb kg

5 16 mm 15M 16 EL16A12 7/8* 22 2-7/16 61 15/16 24 0.2 0.106 20 mm 20M 19 EL20A12 1-1/16* 27 3-7/16 87 1-3/8 35 0.5 0.237 22 mm 22 EL22A12 1-3/16* 30 3-5/8 91 1-7/16 37 0.6 0.278 25 mm 25M 25 EL25A12 1-3/8 35 3-13/16 97 1-9/16 40 1.0 0.459 28 mm 30M 29 EL28A12 1-1/2 38 4 101 1-5/8 41 1.1 0.5010 32 mm 32 EL32A12 1-3/4 44 4-1/4 107 1-3/4 44 1.7 0.7711 36 mm 35M 36 EL36A12 1-7/8 48 4-3/4 121 2-1/16 52 2.0 0.9114 43 mm 45M 43 EL43TA12 2-1/4 57 6-1/4 159 2-5/8 67 3.8 1.72

* Use hex material (measured across the flats), others use round material. Bar dimensions listed may vary. Coupler sizes not shown are available by special order.

LENTON PLUS Standard Bar-To-Bar Couplers A12The unique LENTON taper-threaded splice is the most widely used mechanical splicing system in the world today.

Rebar Size Designation Part A B/D E F WtIn-Lb Metric Canadian Soft Metric Number in mm in mm in mm in mm lb kg

5 16 mm 15M 16 EL16D16 1-1/2 38 15/16 24 0.4 0.186 20 mm 20M 19 EL20D16 1-7/8 48 1-3/8 35 0.9 0.417 22 mm 22 EL22D16 2 51 1-7/16 37 1.1 0.508 25 mm 25M 25 EL25D16 2-1/4 57 1-9/16 40 1.5 0.689 28 mm 30M 29 EL28D16 2-3/4 70 1-5/8 41 2.4 1.1010 32 mm 32 EL32D16 3 76 1-3/4 44 3.1 1.3911 36 mm 35M 36 EL36D16 3-1/4 83 2-1/16 52 4.1 1.8414 43 mm 45M 43 EL43TD16 4 102 2-5/8 67 1 25 3 76 6.4 2.90

LENTON PLUS TERMINATOR D16The LENTON TERMINATOR is an oversized half coupler that secures to the end of reinforcing steel

effectively replacing hooked rebar and reducing congestion.

D

B

A

Rebar Size Designation Part A A1 B B1 D WtIn-Lb Metric Canadian Soft Metric Number in mm in mm in mm in mm in mm lb kg

5 16 mm 15M 16 EL16P14L 1-1/4 32 1 25 4-3/8 112 4-5/8 117 15/16 24 1.0 0.456 20 mm 20M 19 EL20P14L 1-3/8 35 1-1/4 32 6 152 6-5/16 161 1-3/8 35 1.7 0.777 22 mm 22 EL22P14L 1-5/8 41 1-1/4 32 6-5/16 160 6-11/16 169 1-7/16 37 2.4 1.098 25 mm 25M 25 EL25P14L 1-3/4 44 1-3/8 35 6-5/8 169 7 178 1-9/16 40 2.8 1.279 28 mm 30M 29 EL28P14L 2 51 1-1/2 38 6-7/8 175 7-2/8 184 1-5/8 41 3.8 1.7210 32 mm 32 EL32P14L 2-1/4 57 1-3/4 44 7-9/16 192 7-7/8 201 1-3/4 44 5.4 2.4511 36 mm 35M 36 EL36P14L 2-1/2 64 1-7/8 48 8-1/8 206 8-1/2 215 2-1/16 52 6.9 3.1314 43 mm 45M 43 EL43TP14L 3 76 2-1/4 57 10-13/16 274 11-7/16 290 2-5/8 67 13.3 6.03

Contact ERICO for availability

LENTON PLUS Position Coupler P14LLENTON PLUS P14L position couplers is for use with curved, bent, or straight bars, when neither bar can

berotated and where the ongoing bar is free to move in its axial direction.

A

D

BB1

A1

A = DiameterB = LengthD = Bar engagement

A = Large diameter (Meets 5x bar diamaters)B/D = Length/Bar engagementE = Length of small stepF = Small diameter

A = Large diameterA1 = Small diameterB = Length as supplied

B1 = Length as installedD = Bar Engagement