ledchaser_diagram.pdf
Post on 08-Nov-2014
15 Views
Preview:
DESCRIPTION
TRANSCRIPT
Copyright 2002 Knightlight www.knightlight.co.uk
May 2002
KNIGHTLIGHTKLS2 16 LED CHASER LIGHT
C
General DescriptionThe KLS2 Chaser Light is available in Red,Green, Amber, Blue and White using5mm T1 ¾ LED’s. A length of wire isattached to the light for ease ofinstallation. The lights can be used as itstands or other modules can be daisychained to make a longer light effect.
Features
Applications
???
??
Fading trail effectRefresh rates in excess of 8000HzCan be configured for external inputs
Automotive Security Light for the dash.Decorative Light for a PC
Wiring DiagramThe KLS2 Chaser Light comes with 80cm or more of both Yellow and black wire,soldered to the light at one end and the other end is bare tinned wire.
Operating Ratings
Configuration Options
Voltage Input 6-12VTemerature -10C to +70c
Supply current <100mA
Colourr = Redg = Greenb = Bluea = Amberw = White
Noise Suppression OptionIMU = Supression FittedPC = No Supression Fitted
How the LED’s are mounted<none> = Monted on edget = Monted on Topb = Monted on Bottomw = 16 inch wires.
KLS2c-xx-yy
c
xx
yy
+V
0V
Page 1 of 9
Copyright 2002 Knightlight www.knightlight.co.uk
May 2002
Page 2 to 9
KNIGHTLIGHTKLS2-PC 16 LED CHASER LIGHT
C
Mechanical DiagramThis model of the scanner light is ideal for a home computer or anywhere where there isa 12V or 9V DC power available.LED’s mounted on the edge of the board.
Copyright 2002 Knightlight www.knightlight.co.uk
May 2002
Page 3 to 9
KNIGHTLIGHTKLS2-PC-T 16 LED CHASER LIGHT
C
Mechanical DiagramThis model of the scanner light is ideal for a home computer or anywhere where there isa 12V or 9V DC power available.LED’s mounted on the same side as the other components.
Copyright 2002 Knightlight www.knightlight.co.uk
May 2002
Page 4 to 9
KNIGHTLIGHTKLS2-PC-B 16 LED CHASER LIGHT
C
Mechanical DiagramThis model of the scanner light is ideal for a home computer or anywhere where there isa 12V or 9V DC power available.LED’s mounted on the back of the circuit.
Copyright 2002 Knightlight www.knightlight.co.uk
May 2002
Page 5 to 9
KNIGHTLIGHTKLS2-IMU 16 LED CHASER LIGHT
C
Mechanical DiagramContains the voltage suppression circuitry, idea for the automotive environment.LED’s mounted on the edge of the board.
Copyright 2002 Knightlight www.knightlight.co.uk
May 2002
Page 6 to 9
KNIGHTLIGHTKLS2-IMU-T 16 LED CHASER LIGHT
C
Mechanical DiagramLED’s mounted on the same side as the other components.Contains the voltage suppression circuitry, idea for the automotive environment.
Copyright 2002 Knightlight www.knightlight.co.uk
May 2002
Page 7 to 9
KNIGHTLIGHTKLS2-IMU-B 16 LED CHASER LIGHT
C
Mechanical DiagramLED’s mounted on the back of the circuit.Contains the voltage suppression circuitry, idea for the automotive environment.
Copyright 2002 Knightlight www.knightlight.co.uk
May 2002
Page 8 to 9
KNIGHTLIGHTKLS2-IMU-W 16 LED CHASER LIGHT
C
Mechanical DiagramLED’s mounted on 16 inch wires so you can position the LED’s almost anywhere local tothe main board. To help with positioning the LED’s there is insulation rubber covering thelegs of the LED’s and the join to the wire.Ideal if you want to go for a random light effect in a moded computer case or if youwant to place the LED’s around a processor fan for example.Contains the voltage suppression circuitry, idea for the automotive environment.
Copyright 2002 Knightlight www.knightlight.co.uk
May 2002
Page 9 to 9
KNIGHTLIGHTKLS2-PC-W 16 LED CHASER LIGHT
C
Mechanical DiagramLED’s mounted on 16 inch wires so you can position the LED’s almost anywhere local tothe main board. To help with positioning the LED’s there is insulation rubber covering thelegs of the LED’s and the join to the wire.Ideal if you want to go for a random light effect in a moded computer case or if youwant to place the LED’s around a processor fan for example.
top related