iti operator manual english - kongsberg

Simrad ITITrawl instrumentation system

Operator manual

Simrad ITITrawl Instrumentation System

Base version

850--043814 / AA000

Operator manual

1850--043814D

Note

Simrad AS makes every effort to ensure that the information contained within thisdocument is correct. However, our equipment is continuously being improved andupdated, so we cannot assume liability for any errors which may occur.

Warning

The equipment to which this manual applies must only be used for the purpose forwhich it was designed. Improper use or maintenance may cause damage to theequipment or injury to personnel. The user must be familiar with the contents of theappropriate manuals before attempting to operate or work on the equipment.

Simrad AS disclaims any responsibility for damage or injury caused by improperinstallation, use or maintenance of the equipment.

Copyright

2002 Simrad AS

The information containedwithin this document remains the sole property of SimradAS. No part of this document may be copied or reproduced in any form or by anymeans, and the information contained within is not to be communicated to a thirdparty, without the prior written consent of Simrad AS.

Simrad ASStrandpromenaden 50Boks 1113191 Horten

Telephone: 33 03 40 00Facsimile: 33 04 29 87Internet: www.simrad.com

A L W A Y S A T T H E F O R E F R O N T O F T E C H N O L O G Y

Cover and Contents

IP2212D

Sections

1 System familiarizationThis section defines and describes the main system units, and presents a brief theoryof operation.

2 Operational proceduresThis section presents the most common procedures to cover the normal day-to-dayoperations.

3 Screen presentation modesThis section describes the various operationalmodes and the information found on thedisplay.

4 Command referencesThis section describes each command and option in detail. The document is intendedfor reference purposes only.

5 ITI sensorsThis section describes the sensors used with the ITI system. The description includescharging procedures and technical specifications.

6 On--board maintenanceThis section describes the preventive and corrective maintenance actions to beperformed by the ITI operator on board the vessel.

7 ITI EthernetThis section describes the Ethernet commands.

8 Technical specificationsThis section lists the main technical specifications of the Simrad ITI system.

Simrad ITI Base version

II P2212D

Remarks

ReferencesFurther information about the ITI system may be found in the following manual:

� ITI Installation Manual, P2257.

The readerThis operator manual is intended to be used by the system operator. He/she should beexperienced in the operation of positioning systems, or should have attended a Simradtraining course.

NoteThis manual includes sections that may be revised individually. In the event of arevision to any part of thismanual, this “Cover andContents” sectionwill be replaced.

Cover and Contents

IIIP2212D

Document revisions

Rev Written by Checked by Approved by

Date Sign Date Sign Date Sign

A . . .

B

C 02.04.93 NB 02.04.93 KEG 02.04.93 TAL

D 16.01.97 CL 16.01.97 EPB 16.01.97 KEG

E

F

G

H

The original signatures are recorded on the company’s logistic data system.

Simrad ITI Base version

IV P2212D

Simrad References(The information on this page is intended for Simrad’s internal use)

Documents

Sect Title Loc. File P.no/Rev

0 Cover and contents AA000 850--043814 P2212D

1 System familiarization 4AA024 850--130062 P3054/A

2 Operational procedures 4A0024 850--130661 P3053/A

3

4

5

6

7

8

Screen presentation modes

Command references

ITI sensors

On--board maintenance

ITI Ethernet

Technical specifications

4A0024

4A0024

4A0024

4A0024

4A0024

4A0024

850--130663

850--130660

850--130665

850--160664

850--160071

850--130666

P3055/A

P3052/A

P3057/A

P3056/A

P3454/A

P3058/A

Revisions

Rev. A First edition

Rev. B Second edition

Rev. C New software version 2.12

Rev. D Manual updated to reflect new software version 3.10. At the sametime Simrad’s new documentation standard has been implemented.

To assist us in making improvements to the product and to this manual, we wouldwelcome comments and constructive criticism. Please send all such - in writing or byEmail - to:

Simrad ASDocumentation Department

P.O.Box 111N-3191 Horten

Norway

or Email:

simrad.documentation@simrad.com

Sim

radITI

Operatormanual

Sim

radITI

Operatormanual

Sim

radITI

Operatormanual

Sim

radITI

Operatormanual