heated hoses - nordic sensors industrial inc. · ontario: 61 division street guelph, ontario n1h...

ONTARIO:61 DIVISION STREETGUELPH, ONTARION1H 1R3905-730-5295KELLY.MCCANN@NORDICSENSORS.COM

QUÉBEC:1350 RUE NATIONALETERREBONNE, QUÉBECJ6W 6M11-888-667-3421INFO@NORDICSENSORS.COM

HEATED HOSES

• NSI's high-pressure hose has a smooth bore

PTFE core overbraided with stainless steel for

improved strength;

• Two layers of fiberglass/silicone bedding insulation;

• Fiberglass reinforced nichrome heating element;

• 1/2" of a thermal insulation made of meta-aramid felt or

silicone foam;

• Moisture barrier rated at 130°C protects felt insulation;

• Standard abrasion protection: polyester braid. Optional: water resistant

jacket or metal braid;

• Hard plastic or heat-shrink end caps (depending on hose size);

• Standard fitting: 37° JIC female swivel on both ends. Optional: Male NPT

or other fitting types on request;

• Maximum recommended working temperature: 400°F/204°C

(continuous);

• Maximum working pressure: 5000 psi (at 72°F), 3000 psi (at 400°F);

• Custom lengths are available;

• Standard temperature sensor: Thermocouple Type J.

Optional: RTD, thermistor, thermocouple of other types;

• Standard electrical termination: 6 ft. lead cable

with ground wire (AWG 18) fiberglass

overbraided. Custom terminations are

available on request;

• Power supply: 115V or 230V. Custom

voltage rating may be ordered;

• Standard power rating: 35W or 70W per

linear foot. Custom ratings are available

on request.