harvey cement products, inc. 16030 park avenue, harvey, illinois 60426 phone: 708-333-1900 fax:...

SavannaStone®

Design with Imagination

Harvey Cement Products, Inc.16030 Park Avenue, Harvey, Illinois 60426Phone: 708-333-1900 Fax: 708-333-

1910

Turlington Series Thru-Wall Brick

Brina SeriesAshlar Pattern

SAVANNASTONE PRODUCT OVERVIEW

SavannaStone® Custom / Decor

SavannaStone® 2FT Standard Units

Turlington Series Thru-Wall Block

SavannaStone® Custom Medallions

What Are the SavannaStone® Advantages?

ADVANTAGE #1: Virtually Limitless Design Capabilities Custom mold designers utilize wood, fiberglass,

and plaster to create just about any shape and size possible within the cast stone industry: arches, quoins, dentils, panels, medallions, etc.

Color can be customized to fit your palette. 2FT standard sizes can be manufactured in the

same mix design as custom units, creating a uniform color throughout your building.

What Are the SavannaStone® Advantages?

ADVANTAGE #2: Lowest Water Absorption Rate in the Industry When tested to the specific cast stone standard for

absorption [C1195], SavannaStone® is unequaled. Our analysis has shown that a lower water absorption

cannot be obtained without sacrificing the high quality bond with mortar that our product maintains.

Due to our industry low 1.9% to 2.6% tested absorption rate, SavannaStone® was able to exceed the freeze/thaw ‘loss’ allowance test by a hefty 40% margin. This is particularly comforting in cold weather climate areas such as Illinois.

What Are the SavannaStone® Advantages?

ADVANTAGE #3: The Dry Tamp Production Process Process offers a smooth consistent finish which

is less porous/permeable than other types of manufactured and natural stone. This helps control color variance.

PSI strength can be maintained at higher levels than quarried limestones.

Dry tamp provides the most natural-looking cast stone result possible without unsightly bug holes, veining, or large visible aggregate.

ASTM REPORT 1*

*All cast stone should be tested to ASTM C1364 in all circumstances. ASTM C90 reports from our competitors are invalid. While we easily pass all ASTM C90 tests, they are designed for CMU or block shapes and sizes such as our Turlington® Thru Wall products.

Water Absorption Test C1195

ASTM REPORT 2*

*All cast stone should be tested to ASTM C1364 in all circumstances. ASTM C90 reports from our competitors are invalid. While we easily pass all ASTM C90 tests, they are designed for CMU or block shapes and sizes such as our Turlington® Thru Wall products.

Compression Test C1194

Arches

Arches

Arches

Arches

Full FacadesCombining Custom & Standard for Value Engineering

Full FacadesCombining Custom & Standard for Value Engineering

Full FacadesCombining Custom & Standard for Value Engineering

Full Facades

Combining Custom & Standard for Value Engineering

Standard 2FT – Combined with

CustomSame Exact Mix Design Used for Each Process

Standard 2FT – Combined with

CustomSame Exact Mix Design Used for Each Process

Decorative Jambs/Headers

Decorative Jambs/Headers

Custom Engraving

Address StonesMultiple fonts and colors available

Custom Cornice/Panel

Decorative Dentils/Bands

Fully Customizable Within ASTM Standards

Radius Walls and Columns

2FT Rockface Base System

Low Water Absorption Protects Against Salt/Water Damage

Typical 2FT Base Stone

Rockface, Smooth, Bullnose

Full Rockface Corner Returns

CAD SHOP DRAWINGS

Showing Plan Dimensions, Placement in Elevation, and Profile Details - Included at No Charge

WWW.HARVEYCEMENT.COM

For extensive information on our products, including test results

and specification sheets.

Email sales@harveycement.com for more information.