fibre cement external claddings - bunnings...

Fibre Cement

External Claddings

THE OFFERA fibre cement cladding offer that suits all residential and

commercial applications consisting of:

- Modern & lightweight external fibre cement products

- Traditional / Contemporary fibre cement products

- External Claddings

- Internal Linings

- Flooring

- Eave Linings

Leading Brands

- Free Plan Take off available upon request (BGC only)

- Free technical support

- Delivery to Site

Weatherboards

- Linea

- Two widths (150mm / 180mm)

- 16mm thick with deep shadow lines

- Easy to install back bevelled boards

- Pre-primed

- Concealed fixing

- Joined off stud

- Nuline

- Two widths (175mm / 205mm)

- 14mm thick, 4200mm long

- Square and Bullnose profiles

- Easy to install

- Level joining system which gives a

seamless finish

Modern & Lightweight

External Fibre Cement

Geometric or Grid

Application

- Matrix

- A flat, smooth panel installed to create a

geometric, expressed joint look

- 4 panel sizes, sealed on all 6 sides

- Easy to install

- Pre-primed sheets

- No Joining or Rendering required

- Duragrid

- Smooth flat surface with square edge

finish

- 9mm thick (11.7kg/m2)

- Varying widths and lengths available

- Easy to install

- No Joining or Rendering required

Modern & Lightweight

External Fibre Cement

Grooved Panel

- Axon

- Vertically grooved panel

- Two groove width patterns (133mm /

400mm)

- 3 sheet sizes

- Shiplap joint enables easy installation

- Pre-primed

- No joining or rendering required

- Duragroove

-3 profiles available

- Smooth Narrow (100mm)

- Smooth Wide (150mm)

- Woodgrain Wide (150mm)

- Varying lengths available (1200mm wide)

- Shiplap joint enables easy installation

- No joining or rendering required

Modern & Lightweight

External Fibre Cement

Vertical Cladding

-

Durascape

- Gives a subtle vertical shadow line

- 9mm thick

- Two widths available (900mm / 1200mm)

- Two lengths available (2450mm /

3000mm)

- Easy to install

Modern & Lightweight

External Fibre Cement

Horizontal Cladding

- Stria

- Wide board with 15mm horizontal joint

- Two widths available (325mm / 405mm)

- Joined on or off stud

- Pre-primed

- Easy to cut mitred corners mean

horizontal lines wrap corners easily

Modern & Lightweight

External Fibre Cement

STONESHEET- BASE SHEET

• Can hold a maximum tile weight of 40kg per

m2

• Can be installed on steel or timber framing

•Panels are not affected by termites, air, steam,

salt or sunlight.

•Quick and simple to install using manual

nailing, gun nailing or screw fixing

•Can be used in bushfire zones and boundary

wall applications.

BGC Stonesheet is a flat, square edged sheet and is manufactured in 3000x1200x9mm thick

panels.

BGC Stonesheet has rough key face to encourage tile grip and incorporates a unique fixing

method

Weatherboards

- Primeline

- 4 profiles (Summit, Newport, Heritage,

Chamfer)

- Pre-primed

- Hardiplank

- 4 profiles (Woodgrain, Smooth, Old Style,

Rusticated)

- Duraplank

- 3 profiles (Rusticated, Smooth, Woodgrain)

- 7.5mm thick, 4200mm long

- 3 widths (205mm rusticated, 230mm /

300mm smooth and woodgrain)

Traditional Fibre Cement

External Cladding

Panels

- EasyLap

- Shiplap vertical joint that is finished on-

site with a roll-on textured acrylic paint

- No Joint or Rendering required

- Panel Clad

- Pre-textured sheet in two styles (Stucco

and TextureLine)

- Used for feature walls or gable ends

- Easy installation

- No Joint or Rendering required

- Duragroove Woodgrain

- 150mm wide

- Varying lengths available (1200mm wide)

- Shiplap joint enables easy installation

- No Joint or Rendering required

Traditional Fibre Cement

External Cladding

- Harditex

- Pre-primed base sheet that is finished

on-site

- Ready to Render

- Duratex

- Two thicknesses available (7.5mm /

9mm)

- Varying lengths and widths available

- Ready to Render

Traditional Fibre Cement

External Cladding Textured Base Sheets

- Hardiflex

- Smooth flat sheet

- Square edges enable fast installation

- Two thicknesses available (4.5mm /

6.0mm)

- Durasheet

- Two thicknesses available (4.5mm /

6.0mm)

- Varying widths and lengths

- Square edge

Traditional Fibre Cement

External Cladding Standard Fibre Cement

- Hardiflex

- Smooth flat sheet

- Square edges enable fast installation

- Two thicknesses available (4.5mm /

6.0mm)

- Durasheet

- Two thicknesses available (4.5mm /

6.0mm)

- Varying widths and lengths

- Square edge

Traditional Fibre Cement

External Lining Eave Lining

Compressed Sheet

- Hardipanel

- Structural flooring substrate for ceramic

tile finishes over timber or lightweight steel

floor joists

- Compressed Flooring

- High density

- Suitable for wet areas

- Can be used for cladding external

decking

- 3 thicknesses (15mm / 18mm / 24mm)

- Varying widths and lengths available

Traditional Fibre Cement

Flooring

What is it?

•An external structural flooring substrate.

•Used over timber or steel floor joists

•A substrate for ceramic tile finishes

•It gives piece of mind against moisture

damage to balconies

Where do I use it?

•An external substrate for tiled residential

balconies.

•Its a great alternative to particle board,

plywood or compressed fibre cement.

Scyon Secura exterior flooring

What is it?

•A heavy duty but lightweight internal structural

flooring substrate.

•Used over timber or steel floor joists

•A substrate for tiles, vinyl and carpet

•The easiest way to get top protection against

moisture damage in all interior floors

Where do I use it?

•Residential interiors including general areas

and wet areas

•Its a great alternative to particle board, plywood

or compressed fibre cement.

Scyon Secura interior flooring

Ceramic Tile Underlay

- Ceramic Tile Underlay

- Used in wet or dry areas, on top of

internal timber, particleboard and plywood

substrates, and under ceramic tiles

- Pre-sealed to improve moisture

resistance

- Suitable for underlay nail guns

- Ceramic Tile Floor Underlay

- Can be installed over new or existing

floorboards

- Used in wet and dry areas

- 1800 x 1200 x 6mm

- 900mm or 1200mm widths available

Traditional Fibre Cement

Flooring

- Vinyl and Cork Underlay

- Can be used on top of internal timber,

particleboard and plywood substrates

- Large sheets come with pre-marked

nailing pattern

- Suitable for underlay nail guns

- Vinyl and Cork Underlay

- 5mm x 1200mm x 900mm

- Square edge

- Provides a smooth base on which to lay

vinyl or cork flooring

Traditional Fibre Cement

FlooringVinyl and Cork Underlay

Groove Panel Smooth

- Hardigroove

- Flat sheet with vertical V-shaped

grooves carved into its face

- Sheet edges are finished with a half

groove

- Duragroove

- 3 profiles available

- Smooth Narrow (100mm)

- Smooth Wide (150mm)

- Woodgrain Wide (150mm)

- Varying lengths available (1200mm wide)

- Shiplap joint enables easy installation

Internal Linings

Groove Panel Woodgrain

- Pine Ridge

- Timber textured

- Can be joined off stud

- Duragroove Woodgrain

- 150mm wide

- Varying lengths available (1200mm wide)

- Shiplap joint enables easy installation

Internal Linings

Flat Sheet Internal Lining

- Versilux

- Pre-sanded and pre-sealed sheet with

square edges for butt joints

- Duralux

- 3 thicknesses available (4.5mm, 6mm

and 9mm)

- Varying widths and lengths

- General purpose building board

Internal Linings

Internal Lining Wet Area

- Villaboard

- Flat sheet with long edges recessed for

flush jointing

- Sanded smooth

- Can be painted, wall papered or tiled

- Greater tile adhesion than plasterboard

- Wet area or high traffic liner

- Duraliner

- Can be used as part of fire and acoustic

rated wall systems

- Wet area liner

- 6mm or 9mm thickness

- Varying widths and lengths available

Internal Linings

Plan Take Off

The Process

Email or drop off building plan to Bunnings Rep

Select Fibre Cement product options from BGC or Innova Range

Bill of quantities will be provided to

Bunnings

A Bunnings Trade Rep will present a

quotation for review and approval by

Builder

Builder to raise an order with Bunnings

Trade as per quotation

Order is placed

Delivery of order to Site as per agreed date by Bunnings

- Specify products and email plan

- Bill of quantites provided

- Order placed

- Delivery organised

- Traditional Hand Unload and Carry

- Specialist Crane Truck

- Delivery costs will be included in your quote

Crane truck upon request

BGC Plan Take-Off, Quotes and Delivery

Sample Bill of Quantities

Technical Support

Contact your Bunnings Rep for all of your technical questions for

On-site support can be arranged upon request

CAN WE HELP?

Bunnings welcome the opportunity to quote your next job.

Please contact your local Bunnings representative or call 133 062.