dx-804_en
Post on 06-Apr-2018
216 Views
Preview:
TRANSCRIPT
-
8/2/2019 DX-804_EN
1/2
PRODUCT SPECIFICATION
Product Name Beehive
Product Number DX-804
Size -- Length 6.00 m / 19' 8"
Size -- Width 6.00 m / 19' 8"
Size -- Height 4.25 m / 13' 11"
Shipping Weight 920 kg / 2028.3 lb
Shipping Volume 2.6 m3 / 91.8 ft3
Foundations 1
Concrete Volume No Concrete Required
Ages
Capacity
Use Zone -- Length
Use Zone -- Width
Fall Height
ASTM F-1487
5 years - 12 years
42
9.66 m / 31' 8"
9.66 m / 31' 8"
2.44 m / 8' 0"
CSA Z614
5 years - 12 years
42
9.66 m / 31' 8"
9.66 m / 31' 8"
2.44 m / 8' 0"
EN 1176
6 years - 12 years
42
9.00 m / 29' 6"
9.00 m / 29' 6"
1.41 m / 4' 8"
Product Features:
These will be 2 3/8" (60.5mm) OD steel tubing, finished with polyester powdercoating.
SUPPORT POSTS:
These will be steel, 8" (200mm) diameter with integrated holes for pipeconnections, finished with polyester powder coating. Junction caps are affixedwith stainless steel bolts.
PIPE JUNCTIONS:
These will be 20 mm diameter, polyamide (nylon) rope cable with UV protectionand fire retardant solution. Each rope consists of 6 strands each containing 24steel reinforcing strands within a polyamide sleeve, wrapped around a solidpolyamide core for a total of 144 steel reinforcing strands; each end of the cablehaving a junction loop attached onto the cable with a finished aluminum sleeveand lined with a galvanized steel wear bar. Rope shall achieve a Class 7-8Colourfastness rating.
CLIMBING NETS:
This will be a one-piece compressed aluminum ball, compressed in place with150,000 pounds force (667 kN) to prevent the connection from moving andcausing premature cable wear.
BALL KNOTS:
Tensioning is achieved by way of a threaded eyebolt and shackle located at eachPipe Connection capable of drawing the cables a minimum of 4" (100mm).
TENSIONING:
All fasteners for component attachments are stainless steel.BASIC FASTENERS:
This will be 4" (100mm) square galvanized steel tubing, 1/8" (3mm) thick, attachedto the pipe junctions with 2 3/8" (60.5mm) steel tubing and 1/8" (3mm) thick steelreinforcing plates.
FOUNDATION:
Dynamo Playgrounds880 Taylor Creek Dr, Ste. 122Ottawa, ON K1C 1T1 Canada
P: 1-800-790-0034 / 613-845-0910F: 613-845-0914W: www.dynamoplaygrounds.com
Page 1 of 2Revised: Nov 15, 2010
-
8/2/2019 DX-804_EN
2/2
PRODUCT SPECIFICATION
This should be installed only by a licensed playground installer, trained andcertified on the relevant playground standards in place in the region of installation,e.g., NPSI, CPSI or similar certified.
INSTALLATION:
CAN/CSA-Z614-07
ASTM F-1487-07ae1
EN-1176
CPSC Handbook for Public Playground Safety
COMPLIANT WITH:
Certified to EN 1176:2008 TV Rhineland Certificate N AK50162522TV CERTIFIED:
The DX-804 identified in this specification sheet is IPEMA certified. The use andlayout of the DX-804 conforms to the requirements of ASTM F1487 and CSAZ614. To verify product certification visit www.ipema.org.
IPEMA CERTIFIED:
Support Posts Pipe Junctions Climbing Nets Ball Knot
Shackle
Dynamo Playgrounds880 Taylor Creek Dr, Ste. 122Ottawa, ON K1C 1T1 Canada
P: 1-800-790-0034 / 613-845-0910F: 613-845-0914W: www.dynamoplaygrounds.com
Page 2 of 2Revised: Nov 15, 2010
top related