8/2/2019 DX-804_EN

1/2

PRODUCT SPECIFICATION

Product Name Beehive

Product Number DX-804

Size -- Length 6.00 m / 19' 8"

Size -- Width 6.00 m / 19' 8"

Size -- Height 4.25 m / 13' 11"

Shipping Weight 920 kg / 2028.3 lb

Shipping Volume 2.6 m3 / 91.8 ft3

Foundations 1

Concrete Volume No Concrete Required

Ages

Capacity

Use Zone -- Length

Use Zone -- Width

Fall Height

ASTM F-1487

5 years - 12 years

42

9.66 m / 31' 8"

9.66 m / 31' 8"

2.44 m / 8' 0"

CSA Z614

5 years - 12 years

42

9.66 m / 31' 8"

9.66 m / 31' 8"

2.44 m / 8' 0"

EN 1176

6 years - 12 years

42

9.00 m / 29' 6"

9.00 m / 29' 6"

1.41 m / 4' 8"

Product Features:

These will be 2 3/8" (60.5mm) OD steel tubing, finished with polyester powdercoating.

SUPPORT POSTS:

These will be steel, 8" (200mm) diameter with integrated holes for pipeconnections, finished with polyester powder coating. Junction caps are affixedwith stainless steel bolts.

PIPE JUNCTIONS:

These will be 20 mm diameter, polyamide (nylon) rope cable with UV protectionand fire retardant solution. Each rope consists of 6 strands each containing 24steel reinforcing strands within a polyamide sleeve, wrapped around a solidpolyamide core for a total of 144 steel reinforcing strands; each end of the cablehaving a junction loop attached onto the cable with a finished aluminum sleeveand lined with a galvanized steel wear bar. Rope shall achieve a Class 7-8Colourfastness rating.

CLIMBING NETS:

This will be a one-piece compressed aluminum ball, compressed in place with150,000 pounds force (667 kN) to prevent the connection from moving andcausing premature cable wear.

BALL KNOTS:

Tensioning is achieved by way of a threaded eyebolt and shackle located at eachPipe Connection capable of drawing the cables a minimum of 4" (100mm).

TENSIONING:

All fasteners for component attachments are stainless steel.BASIC FASTENERS:

This will be 4" (100mm) square galvanized steel tubing, 1/8" (3mm) thick, attachedto the pipe junctions with 2 3/8" (60.5mm) steel tubing and 1/8" (3mm) thick steelreinforcing plates.

FOUNDATION:

Dynamo Playgrounds880 Taylor Creek Dr, Ste. 122Ottawa, ON K1C 1T1 Canada

P: 1-800-790-0034 / 613-845-0910F: 613-845-0914W: www.dynamoplaygrounds.com

Page 1 of 2Revised: Nov 15, 2010

8/2/2019 DX-804_EN

2/2

PRODUCT SPECIFICATION

This should be installed only by a licensed playground installer, trained andcertified on the relevant playground standards in place in the region of installation,e.g., NPSI, CPSI or similar certified.

INSTALLATION:

CAN/CSA-Z614-07

ASTM F-1487-07ae1

EN-1176

CPSC Handbook for Public Playground Safety

COMPLIANT WITH:

Certified to EN 1176:2008 TV Rhineland Certificate N AK50162522TV CERTIFIED:

The DX-804 identified in this specification sheet is IPEMA certified. The use andlayout of the DX-804 conforms to the requirements of ASTM F1487 and CSAZ614. To verify product certification visit www.ipema.org.

IPEMA CERTIFIED:

Support Posts Pipe Junctions Climbing Nets Ball Knot

Shackle

Dynamo Playgrounds880 Taylor Creek Dr, Ste. 122Ottawa, ON K1C 1T1 Canada

P: 1-800-790-0034 / 613-845-0910F: 613-845-0914W: www.dynamoplaygrounds.com

Page 2 of 2Revised: Nov 15, 2010