druck- und temperaturmesstechnik gsoft / testing and callibratiion technology / 25.03.2009 testing-...
Post on 24-Dec-2015
218 Views
Preview:
TRANSCRIPT
Druck- und Temperaturmesstechnik
GSoft / Testing and Callibratiion Technology / 25.03.2009
Testing- and Calibration Technology
Data logger evaluation software GSoft
1
Data logging in process
…with handheld CPH 6200 / CTH 6200 and data logger evaluation software GSoft
2
Handheld with evaluation software GSoft
Software features:
- Easy operation due to self-explanatory icon buttons- Zoom function available- Remote operation via PC possible- Data can be exported to Excel®, etc.- Language: English, German, France, Spain, ...
CPH 6200 CTH 6200
Instrument features:
- CPH 6200 and CTH 6200 can store measurement data (Logger integrated)- Possibility of cyclic storage of the measurement data- Storage up to 16,200 measurement data (depending on the model)
pressure
temperature
3
2sec
Starting logger (measurement storage)
Logger activeMeasuring mode
Cyclic measurement storage is active. Logger
active: until stopped manual by the user or logger reaches total
storage capacity (up to 16,200 measurement data)
Initial state:measuring mode*
*cyclic logger has been activated before via menu.
4
Button stops the logger Initial state:measuring mode
Stop logger?NOLogger active
Stop logger?YES?
Measuring mode
Cyclic measurement storage is active. Logger
can be stopped: by pressing
Safety function: should measurement storage be
stopped? Choice via
or
Stopping logger (measurement storage)
5
Measurement data
Transfer of the measurement data to PC via RS232- or USB-interface
GSoft offers the possibility to show the measurement data on PC as table or diagram
Connecting the Handheld with PC
6
Stored logger data are shown
Read logger data
4. Showing actual status of the Handheld
Sensor data at the moment when the actual status is read out
12
Further information1.) Graph options: zoom function
2.) Peak detection via min/max function
3.) Start logger, if any data are already in the logger
4.) Software update
5.) Outlook
6.) Product Support
16
After marking an area with the left mouse button, the zoomed graph will be shown
1.) Graph options: zoom function
17
1.) Graph options: zoom function
Via the scrolling button you can scroll your zoomed graph in every position you want
18
2.) Peak detection via min/max function
Available peak in the time span between 17:40:03 and 17:40:04
Actual measure data 17:40:04
In addition to the actual measured value, the min- and max-values also will be stored and can be shown in the graph. (Choice via the window “Create New Diagram”)
The sample shows, in the time span between 17:40:03 and 17:40:04 there was a peak of about 0,64 bar which will be read out and shown in the graph parallel to the actual measure data of the time 17:40:04.
19
3.) Start logger, if any data are already in the logger
Safety function: should the stored measurement data
really be cleared? Choice via
or
Button clears the existing measurement data
Initial state: New logger data can be stored
(see description above)
Clear existing logger data? NO?
Measuring mode
Measuring mode
Clear existing logger data? YES?
Delete old measurement data: by pressing
for 2seconds
2sec
20
4.) Software updateSoftware update on www.wika.de : //Download/Software/Calibration Technologyfor free.
21
4.) Software updateDownload file (update file) has to be stored in the same folder in which the program GSoft is located
22
5.) OutlookPossibility to show pressure- and temperature data in one graph
Both data sets have to be stored as 2 files. Thus both files can be opened and displayed in one diagram.
24
5.) OutlookPossibility of „Copy and Paste“. Easy to import measurement data in a Excel-sheet
25
GSoft
Excel sheet
top related