draco tera | s6 - ihse - kvm & beyond power supply unit (100-240vac, 50/60 hz, 0,7a max.)...

IHSE GmbHMaybachstr. 1188094 Oberteuringen / Germany

Telefon: +49 (7546) 9248-0Telefax: +49 (7546) 9248-48

E-Mail: info@ihse.deWeb: www.ihse.de

PRODUCT VARIANTS

Server Room

Edit suite

One-touch, instant switching

MAM fader+channel attention button control

Latency and artefactfree

Flexible and expandable configuration

Keyboard/OSD switching included

Supports USB-HID, USB 2.0, USB 3.0

SNMP & Syslog

The Draco tera | S6 KVM switch works in conjunction with Avid’s Pro Tools surface to provide instant switching between digital audio workstations, directly from the S6 control surface. With a single press of a button on the Master Touch Module or a fader channel attention key the operator can instantly select a different source workstation; matching

it to the task, without annoying delay and increasing operational efficiency.Preconfigured and simple-to-customiseThe Draco tera | S6 is simple to set up and configure. It is supplied with pre-installed firmware dedicated to the Pro Tools | S6 surface.CustomisableAdministration control through the

S6 Master Touch Module, allows selection of DAWs to be accessed and management of individual connections.ExpandableSpare ports allow additional devices to be added to extend the system. Larger switches, fiber connections and alternate interfaces are also available.

PRODUCT DESCRIPTION

Draco tera | S6KVM Matrix Switch for the Pro Tools | S6

For use in studios with single operator Avid | S6 control surfaces. Supports two Pro Tools workstations or other DAWs.

Draco tera | S6 - 1

For use in studios with single- or dual-operator Avid | S6 control surfaces. Supports four Pro Tools workstations or other DAWs.

Draco tera | S6 - 2

PRELIMINARY

Subject to change with

out notice

IHSE GmbHMaybachstr. 1188094 Oberteuringen / Germany

Telefon: +49 (7546) 9248-0Telefax: +49 (7546) 9248-48

E-Mail: info@ihse.deWeb: www.ihse.de

Draco tera | S6KVM Matrix Switch for the Pro Tools | S6

TECHNICAL DATADraco tera | S6 - 1 Draco tera | S6 -2

Supported signals DVI-D DVI-D

Resolutions 1920 x 1200 @ 60Hz, 24-bit 1920 x 1200 @ 60Hz, 24-bit

Max cable distance 140m 140m

Control Direct: Pro Tools | S6 surface, Keyboard/OSD Direct: Pro Tools | S6 surface, Keyboard/OSD

Power Supply Internal power supply unit (100-240VAC, 50/60 Hz, 0,7A max.) Internal power supply unit (100-240VAC, 50/60 Hz, 0,7A max.)

Dimensions 1x 1U rack unit, 442 x 250 x 44 mm (Rack mount kit supplied)1x extender unit 221 x 147 x 43 mm

1x 1U rack unit, 443 x 435 x 45 mm2x 1U rack units, each 442 x 250 x 44 mm(Rack mount kits supplied)2x extender units, each 221 x 147 x 43 mm

KVM Ports8 ports total6 ports used (2 per connection)2 ports spare

16 ports total12 ports used (2 per connection)4 ports spare

Cables DVI-D + USB-B cables supplied DVI-D + USB-B cables supplied

Order number Draco tera | S6 – 1 Draco tera | S6 – 2

FUNCTIONAL DIAGRAM

Draco tera KVM switches are available in a range of sizes from 8 to 576 ports and offer versatility and flexibility suited to all broadcast and post production installations.

ENDLESS KVM SWITCHING CAPABILITY

Equipment room

CPU Unit CPU Unit CPU Unit CPU Unit

Studio

Draco tera | S6 KVM Switch

CON Unit CON Unit

Equipment room

CPU Unit CPU Unit CPU Unit CPU Unit CPU Unit CPU Unit CPU Unit CPU Unit

Studio Studio

Draco tera | S6 KVM Switch

CON Unit CON Unit CON Unit CON Unit

ąą Supports two Dual-Head, Dual-Link DAWs and one Dual-Head, Dual-Link monitorąą Cat X, DVI connectionsąą Two 1U rack mount units on CPU side + one compact chassis on console sideąą Integral power supplyąą Two spare switching ports for future expansion

Draco tera | S6 - 1

ąą Supports four Dual-Head, Dual-Link DAWs and two Dual-Head, Dual-Link monitorsąą Cat X, DVI connectionsąą Three 1U rack mount units on CPU side +

two compact chassis on console sideąą Integral power supplyąą Four spare switching ports for future

expansion

Draco tera | S6 - 2

The Draco tera | S6 models listed are based on common installation requirements. Connection and expansion options are available to suit individual requirements, including fiber extension, HDMI and DisplayPort single capability and parallel HD-SDI switching of preview monitors. Higher resolutions (4K/DCI) depend on the type of extender and are available on request, redundant power supplies and extension options are also available. For specific configuration and installation requirements please contact your local dealer.

OPTIONS

More informationavid.ihse.com

PRELIMINARY

Subject to change with

out notice