draco tera | s6 - ihse - kvm & beyond power supply unit (100-240vac, 50/60 hz, 0,7a max.)...
TRANSCRIPT
IHSE GmbHMaybachstr. 1188094 Oberteuringen / Germany
Telefon: +49 (7546) 9248-0Telefax: +49 (7546) 9248-48
E-Mail: [email protected]: www.ihse.de
PRODUCT VARIANTS
Server Room
Edit suite
One-touch, instant switching
MAM fader+channel attention button control
Latency and artefactfree
Flexible and expandable configuration
Keyboard/OSD switching included
Supports USB-HID, USB 2.0, USB 3.0
SNMP & Syslog
The Draco tera | S6 KVM switch works in conjunction with Avid’s Pro Tools surface to provide instant switching between digital audio workstations, directly from the S6 control surface. With a single press of a button on the Master Touch Module or a fader channel attention key the operator can instantly select a different source workstation; matching
it to the task, without annoying delay and increasing operational efficiency.Preconfigured and simple-to-customiseThe Draco tera | S6 is simple to set up and configure. It is supplied with pre-installed firmware dedicated to the Pro Tools | S6 surface.CustomisableAdministration control through the
S6 Master Touch Module, allows selection of DAWs to be accessed and management of individual connections.ExpandableSpare ports allow additional devices to be added to extend the system. Larger switches, fiber connections and alternate interfaces are also available.
PRODUCT DESCRIPTION
Draco tera | S6KVM Matrix Switch for the Pro Tools | S6
For use in studios with single operator Avid | S6 control surfaces. Supports two Pro Tools workstations or other DAWs.
Draco tera | S6 - 1
For use in studios with single- or dual-operator Avid | S6 control surfaces. Supports four Pro Tools workstations or other DAWs.
Draco tera | S6 - 2
PRELIMINARY
Subject to change with
out notice
IHSE GmbHMaybachstr. 1188094 Oberteuringen / Germany
Telefon: +49 (7546) 9248-0Telefax: +49 (7546) 9248-48
E-Mail: [email protected]: www.ihse.de
Draco tera | S6KVM Matrix Switch for the Pro Tools | S6
TECHNICAL DATADraco tera | S6 - 1 Draco tera | S6 -2
Supported signals DVI-D DVI-D
Resolutions 1920 x 1200 @ 60Hz, 24-bit 1920 x 1200 @ 60Hz, 24-bit
Max cable distance 140m 140m
Control Direct: Pro Tools | S6 surface, Keyboard/OSD Direct: Pro Tools | S6 surface, Keyboard/OSD
Power Supply Internal power supply unit (100-240VAC, 50/60 Hz, 0,7A max.) Internal power supply unit (100-240VAC, 50/60 Hz, 0,7A max.)
Dimensions 1x 1U rack unit, 442 x 250 x 44 mm (Rack mount kit supplied)1x extender unit 221 x 147 x 43 mm
1x 1U rack unit, 443 x 435 x 45 mm2x 1U rack units, each 442 x 250 x 44 mm(Rack mount kits supplied)2x extender units, each 221 x 147 x 43 mm
KVM Ports8 ports total6 ports used (2 per connection)2 ports spare
16 ports total12 ports used (2 per connection)4 ports spare
Cables DVI-D + USB-B cables supplied DVI-D + USB-B cables supplied
Order number Draco tera | S6 – 1 Draco tera | S6 – 2
FUNCTIONAL DIAGRAM
Draco tera KVM switches are available in a range of sizes from 8 to 576 ports and offer versatility and flexibility suited to all broadcast and post production installations.
ENDLESS KVM SWITCHING CAPABILITY
Equipment room
CPU Unit CPU Unit CPU Unit CPU Unit
Studio
Draco tera | S6 KVM Switch
CON Unit CON Unit
Equipment room
CPU Unit CPU Unit CPU Unit CPU Unit CPU Unit CPU Unit CPU Unit CPU Unit
Studio Studio
Draco tera | S6 KVM Switch
CON Unit CON Unit CON Unit CON Unit
ąą Supports two Dual-Head, Dual-Link DAWs and one Dual-Head, Dual-Link monitorąą Cat X, DVI connectionsąą Two 1U rack mount units on CPU side + one compact chassis on console sideąą Integral power supplyąą Two spare switching ports for future expansion
Draco tera | S6 - 1
ąą Supports four Dual-Head, Dual-Link DAWs and two Dual-Head, Dual-Link monitorsąą Cat X, DVI connectionsąą Three 1U rack mount units on CPU side +
two compact chassis on console sideąą Integral power supplyąą Four spare switching ports for future
expansion
Draco tera | S6 - 2
The Draco tera | S6 models listed are based on common installation requirements. Connection and expansion options are available to suit individual requirements, including fiber extension, HDMI and DisplayPort single capability and parallel HD-SDI switching of preview monitors. Higher resolutions (4K/DCI) depend on the type of extender and are available on request, redundant power supplies and extension options are also available. For specific configuration and installation requirements please contact your local dealer.
OPTIONS
More informationavid.ihse.com
PRELIMINARY
Subject to change with
out notice