distributed energy - 2g chp cogeneration solutions
Post on 23-Jan-2015
398 Views
Preview:
DESCRIPTION
TRANSCRIPT
Distributed EnergyDistributed Energy2G2G®® Cogeneration CHP Cogeneration CHP
TechnologiesTechnologies
Smart DecentralizedSmart DecentralizedEnergy GenerationEnergy Generation
63%
33%
33%
8 ~ 10%
43 ~ 51%
38 ~ 41%
81 ~92%
Increasing Energy EfficiencyIncreasing Energy EfficiencyCHP – Combined Heat & PowerCHP – Combined Heat & Power
Source of Information: U.S. EPA and The Department of Energy
The Department of EnergyThe Department of Energyand EPA Targetsand EPA Targets
According to Studies published by the Department of Energy and the EPA,… Combined Heat & Power (CHP) Concepts (including Tri-Generation / Cooling) that efficiently integrate Distributed Power Generation with thermally activated Technologies (TAT) reduce Stress on the National Electric Grid caused by Peak-Power-consuming HVAC Systems.
More efficient Use of our Energy ResourcesMore secure against natural and Man-made DisastersReduced Pollution
Benefits:
This Illustration further highlights the Benefits and Possibilities of Distributed Energy at the Grid Level. European Countries are now actively improving their Grids with extensive CHP Interconnections. Small first Steps in the US are showing an increasing Interest in developing a Smart Grid in North America.
Smart Grid IntegrationSmart Grid Integration
CHP DevelopmentCHP Development
CHP is not new in North America. The 1980’s saw a rapid growth of CHP Capacity in the United States. Installed Capacity increased from less than 10 Gigawatts electric (GWe) in 1980 to almost 44 GWe by 1993. Most of this Capacity was installed at large industrial Facilities such as Pulp and Paper, Petroleum, and Petrochemical Plants. These Plants provided a “Thermal Host" for the Electric Generator.
For many Years CHP Cogeneration has been a complex Issue that involves an Army of Engineers, Consultants, Suppliers, Contractors and Subcontractors.
Every Installation is individually specified, designed, engineered, and Components are generally installed and first-time tested jointly on-Site.
Small CHP Installations have been a very rare Exception.
That’s the Past! Todays Technologies are making Natural Gas CHP much easier.
A smart, less complicatedA smart, less complicatedand much more Cost-Effective Solutionand much more Cost-Effective Solution
Our SolutionOur Solution
Our CHP Cogeneration TechnologyOur CHP Cogeneration Technology
Our CHP Equipment is supplied:
All Inclusive – One Package
Fully Factory Tested
Connection Ready
For Inside Installation For Outside Installation
One Stop – One SourceNo Need to invent the Wheel again Proven DesignFunctionality is guaranteedMore than 3000 Units in Operation
Practical, Functional, and StandardizedPractical, Functional, and Standardized
Easy to Transport – Easy to Install – Easy to Maintain
A complete“All-In-One”
Package Module with one general
consistent Factory Quality Standard.
Our “Factory Package” Project ApproachOur “Factory Package” Project Approach
Chillers / Trigeneration
Special Gas Train &Regulation Requirements
Gas Treatment
Fuel Processing / Treatment LV & HV Switch Gear Control Systems Installation Service Maintenance Contracts
We are specialized in offering complete Factory Package Cogeneration Solutions.
Cogeneration Module
Special Cooling Requirements
Transformers
The Base CHP ModuleThe Base CHP Module
Pump & CirculationCompartment
Electronic ControlSection
Heat ExchangerCompartment
Heat Exchanger Compartment includes Gas
Supply & Gas Train / Regulation
Pump & CirculationCompartment
Electronic ControlSection
Heat ExchangerCompartment
Special Sound AttenuatedEnclosure for Inside Installation
The Base CHP ModuleThe Base CHP Module
Containerized CHP ModulesContainerized CHP Modules
Fully Containerized & Sound Attenuated Cogeneration CHP Modules
The entire CHP Cogeneration Plant in one Container.
Containerized CHP ModulesContainerized CHP Modules
Available in various Sizesand Configurations.
Very easy Transportationand Installation.
Attention to Detail, perfectly engineered,practical and functional. Top Quality.
Containerized CHP Modules – Everything IncludedContainerized CHP Modules – Everything Included
““Plug and Operate” – Smart and Cost-EffectivePlug and Operate” – Smart and Cost-Effective
Standard Connections and Termination is used throughout, to minimize the Installation Effort. All Units are designed for extreme fast Connection and very easy Operation.
Gas In
Water Circulation Connections
ExhaustGas Out
CHPControl
We have simplified the Implementation of Cogeneration Systems, by integrating all CHP Components into one Unit (All-In-One).
The FutureThe Future
2G CHP Cogeneration Systems are ideally suitedto build a Network of Distributed Energy Stationsand to contribute towards the Smart Grid.
Distributed Energy - Our Product FocusDistributed Energy - Our Product FocusNatural Gas – CogenerationNatural Gas – Cogeneration
Distributed Energy, decentralized CHP (Combined Heat & Power) Solutions for Natural Gas Applications in various Industries.
Our 2G® combined heat and power (CHP), also known as co-and tri-generation solutions, are an efficient, clean, and reliable approach to generating power and thermal energy from a single fuel source. By installing a CHP system designed to meet the thermal and electrical base-loads of a facility, cogeneration can greatly increase the overall operational efficiency and decrease energy costs. At the same time, CHP reduces the emission of greenhouse gases.
Natural Gas Cogeneration
High Efficiency Solutions !
Our Area of ExpertiseOur Area of Expertise
Decentralized Clean Energy SolutionsDecentralized Clean Energy Solutions
In Addition to smart Natural Gas CHP Cogeneration Solutionswe are also focusing on Biogas – Renewable Energy Conversion.
Our Product Focus – BiogasOur Product Focus – Biogas
Dairy Farm & Cattle Industry Pig Farm Industry Chicken & Poultry Farm Industry Agri Waste - Silage & Biomass
Organic Compost
Organic Waste
Food Processing Waste
Our advanced 2G® biogas energy generation technology utilizes the fermentation process (anaerobic digestion) in natural biodegradable materials to generate electricity and heat using a fuel that is both efficient and environmentally friendly. A mixture of methane (CH4) and carbon dioxide (CO2) provides sufficient calorific value to operate our modern biogas cogeneration plants. A clean and economical alternative to fossil fuels; highly efficient, eco-friendly, with many economic benefits.
Biogas Cogeneration
We provide Anaerobic Digester Developers, Builders, Operators, and the entire Biogas Industry with highly efficient and cost-effective Cogeneration CHP Solutions.
Our Area of ExpertiseOur Area of Expertise
Our Product Focus – Landfill Gas - LFGOur Product Focus – Landfill Gas - LFG
Many Landfills don’t utilize their Methane Gas Source. Its simply flared / burned. Valuable Energy is wasted.
Waste to Energy ! Our advanced 2G® landfill gas (LFG) energy generation technology utilizes the bacterial decomposition process of organic material contained in landfills to generate electricity and heat using a fuel that is both efficient and environmentally friendly. A mixture of methane (CH4) and carbon dioxide (CO2) provides sufficient calorific value to operate our modern biogas cogeneration plants, and offers a clean and economical alternative to fossil fuels.
Landfill Gas Cogeneration
We provide LFG Developers, Contractors, Landfill Operators, and the entire LFG Biogas Industry with highly efficient and cost-effective Cogeneration CHP Solutions.
Our Area of ExpertiseOur Area of Expertise
Our Product Focus – Sewage Gas – WWTPOur Product Focus – Sewage Gas – WWTP
Our advanced 2G® sewage gas energy generation technology utilizes the anaerobic digestion process, and biogas is produced by the digestion and incineration of sewage sludge. Sewage gas is typically composed of methane (CH4) and carbon dioxide (CO2), with traces of other gases. This type of biogas can be utilized to generate electricity and heat. The gas provides sufficient calorific value to operate our modern cogeneration plants.
Sewage Gas Cogeneration
Many Wastewater Treatment Plants don’t utilize their Methane Gas Source. Valuable Energy is wasted !
Generate Energy !
We provide Wastewater Sewage Developers and Treatment Facility Operators, with highly efficient and cost-effective Sewage Biogas Cogeneration CHP Solutions.
Our Area of ExpertiseOur Area of Expertise
Our Product Focus – Coalmine GasOur Product Focus – Coalmine Gas
Coal Mines have a great Potential to generate significant Income from Coal Gas Utilization.
Electricity
CarbonCredits &Offsets
Heat
Our innovative 2G® coalmine gas cogeneration technology helps to dispose coalmine gas by harnessing it as an energy source, avoiding the release of methane. It is widely acknowledged that Coal Bed Methane (CBM) can provide a valuable source of clean energy. 2G® coal mine gas CHP plants provide an effective and safe way to generate electricity and heat. Our advanced technology is designed to cope with extreme gas quality and quantity fluctuations.
Coalmine Gas Cogeneration
We provide Mine Operators with highly efficient Energy and CHP Solutions.
Our Area of ExpertiseOur Area of Expertise
Our Product Focus – Wellhead GasOur Product Focus – Wellhead Gas
Many Gas Fields and Wellheads don’t utilize their Methane Gas Source. Its simply flared / burned. Valuable Energy is wasted.
Wellhead Gas to Energy !
Our advanced 2G® gas energy generation technology utilizes the natural gas reserves contained in gas wells, using a fuel that is both efficient and contains sufficient BTU for power generation . A mixture of methane (CH4) and Nitrogen (N22) provides sufficient calorific value to operate our modern gas cogeneration plants, and offers a clean and economical alternative to just flaring the gas.
Wellhead Gas Power & Cogeneration
We provide Developers, Contractors, Gas Field Operators, and the entire Natural Gas Industry with highly efficient and cost-effective Cogeneration CHP Solutions.
Our Area of ExpertiseOur Area of Expertise
Gas
Distributed Energy - Our Product FocusDistributed Energy - Our Product FocusNatural Gas – CogenerationNatural Gas – Cogeneration
Distributed Energy, decentralized CHP (Combined Heat & Power) Solutions for Natural Gas Applications in various Industries.
Our 2G® combined heat and power (CHP), also known as co-and tri-generation solutions, are an efficient, clean, and reliable approach to generating power and thermal energy from a single fuel source. By installing a CHP system designed to meet the thermal and electrical base-loads of a facility, cogeneration can greatly increase the overall operational efficiency and decrease energy costs. At the same time, CHP reduces the emission of greenhouse gases.
Natural Gas Cogeneration
High Efficiency Solutions !
Our Area of ExpertiseOur Area of Expertise
EPA RecognitionEPA Recognition
The EPA (U.S. Government Environmental Protection Agency) approved 2G CENERGY ® as Partner, assisting the Agency in their Efforts to implement CHP Technologies in the US.
2G CENERGY® has also been approved as Partner for the EPA Coalbed Methane and Landfill Methane Outreach Programs.
Engines designed and built for BiogasEngines designed and built for Biogas
If these Differences are not considered and an Engine has not been specificallydesigned for Biogas, operational Dependability will be an Issue.
We provide Engine Technologies that are made for Biogas.This assures Reliability, Durability, High Efficiency, and Low Maintenance.
Natural Gas
Biogas
The chemical Composition of Biogas is not identical to Natural Gas.Gas Treatment results in Approximation, but there remains a Difference.
CH 4
CH 4
Why are 2G Engine Technologies moreWhy are 2G Engine Technologies moreadvanced and perfectly suited for Biogas ?advanced and perfectly suited for Biogas ?
Gas Flow Optimization
Optimized ThrottlePosition
Optimized Exhaust Manifold
Improved Intercooler
Specially designedABB Turbo
Why are 2G Engine Technologies moreWhy are 2G Engine Technologies moreadvanced and perfectly suited for Biogas ?advanced and perfectly suited for Biogas ?
Why are 2G Engine Technologies moreWhy are 2G Engine Technologies moreadvanced and perfectly suited for Biogas ?advanced and perfectly suited for Biogas ?
Especially developed for weak and corrosive Biogas (incl. Metallurgical Optimization)
Optimized Gas Mixer
Components for optimizedComponents for optimizedCombustion Chamber GeometryCombustion Chamber Geometry
Patented Tri-Flow Piston GeometryPatented Tri-Flow Piston Geometry for optimized Combustionfor optimized Combustion
Drive Technology
Our proprietary & patented
Engines designed and built for highlyEngines designed and built for highlyefficient Natural Gas & Biogas Combustionefficient Natural Gas & Biogas Combustion
®
Our proprietary Engine Technology enables us to distinguish 2G® from the Competition, to provide Customers with higher Efficiency, and to maintain a Leadership Position.
Practical, Functional, and StandardizedPractical, Functional, and Standardized
Reliability & DurabilityReliability & Durability
First Major Overhaul 60,000 HoursFirst Top-End Overhaul 30,000 Hours
Controls / SwitchgearControls / Switchgear
Advanced Switchgear andControls are fully integratedComponents for all Power
Modules.
StandardsStandards
Designed and manufactured in an ISO 9001 compliant Facility
Equipment meets or exceeds international Specifications:
ABGSM TM3, AS1359, AS2789, BS4999, BS5000, BS5514, DIN6271, DIN6280, EGSA101P, IEC34/1, ISO3046/1, ISO8528, JEM1359, NEMA MG 1-22, VDE 0530, 89/392/EEC, 89/336/EEC
TÜV, VDE, an CE certified, UL compliant
Continuous Output available without varying Load for an unlimited Time in accordance with ISO8528, ISO3046/1, AS2789, DIN6271, and BS5514
Ratings and Fuel Consumption are based on ISO3046/1 Standard Reference Conditions of 25 °C (77 deg F) of Ambient Temperature and 100 kPa (29.61 in Hg) of total barometric Pressure, 30% relative Humidity with 0, +5% Fuel Tolerance.
Emmissions:
TA-Luft 2009 / Euro Tier 5 and 6 Standards (2009/2014)U.S. EPA Compliant
Service & Product SupportService & Product Support
We are providing Service & Maintenance through our Network of Factory trained and authorized 2G® Service Stations, as well as through a Network of strategically positioned Factory owned “Rolling Workshops” throughout the US.
Service Support & Remote Control
Service & Product SupportService & Product Support
Our North-and South American service headquarter, is organizing all service support issues. The primary parts distribution warehouse is located at the 2G factory in St. Augustine (Jacksonville), Florida, USA. This location allows us to more easily meet our United States, Central & South American customers growing demands for technically advanced and environmentally responsible energy system.
Irrespective of the customer location, 2G CENERGY® will guarantee a high standard service & product support through a network of partners specialized in technical support.
CHP Cogeneration InstallationsCHP Cogeneration Installations
2G CHP Cogeneration Installations
2G North & South American CHP Cogeneration Projects in Progress
More than 3000 CHP Systems installed
The 2G Factory in the USAThe 2G Factory in the USA
US Factory – St. Augustine, FLUS Factory – St. Augustine, FL
The EndThe End
This is the End of our brief Company Presentation.
Thank You !
For any Questions and more Info:
2G CENERGY Power Systems Technologies Inc.205 Commercial Drive
St. Augustine, FL 32092 – USATel.: +1-904-579-3217Fax: +1-904-406-8727
E-Mail: info@2g-cenergy.com
Visit our Website at: http://www.2g-cenergy.com
top related