diapositivas en ingles iii
Post on 12-Apr-2017
87 Views
Preview:
TRANSCRIPT
QUESTION EXCERPT
1-ALWAYS EXAMINE THE TOOL FOR DAMAGES BEFORE USE.
TRUE!
2-IT IS OK TO WEAR LOOSE CLOTHING, DANGLING OBJECTS AND JEWELLERY USING HAND TOOL.
FALSE
3-KEEP CORDS AND HOSES AWAY FROM HEAT, OIL AND SHARP EDGES.
TRUE
4-USE ONLY TOOLS AND EQUIPMENT IN GOOD CONDITION.
TRUE
5-IT IS OK TO MAKE ADJUSTMENTS OR CLEAR A JAM WHILE THE POWER TOOL IS RUNNING
FALSE
6-IF ANY TOOL BREAKS OR MALFUNCTIONS, REPORT IT TO YOUR SUPERVISOR IMMEDIATELY
TRUE
7-BEFORE CONNECTING TO A POWER SOURCE, MAKE SURE THE POWER IS ON.
FALSE
8-SAFETY GLASSES SHALL ALWAYS BE WORN WHENEVER YOU ARE USING POWER HAND TOOL
TRUE
9-THERE ARE SEVERAL TYPES OF POWER TOOLS, INCLUDING ELECTRIC, PNEUMATIC, HYDRAULIC
TRUE
10-NEVER USE ELECTRIC TOOLS IN WET CONDITIONS
TRUE
11-WHEN NOT IN USE, POWER TOOLS SHOULD BE DISCONNECTED
TRUE
12-KEEP SAFE DISTANCE BETWEEN YOUR HANDS AND ALL MOVING PARTS OF THE POWER TOO
TRUE
13-DON’T LEAVE A POWER TOOL UNATTENDED WHILE IT IS RUNNING
FALSE
14-IT IS OK TO STARTLE SOMEONE WHO IS USING A POWER TOOL
FALSE
15-USE SAFETY GUARDS EXACTLY AS THEY ARE SUPPOSED TO BE USED
TRUE
16-WHEN TIGHTENING A NUT WITH AN ADJUSTABLE WRENCH, ALWAYS PULL THE WRENCH TOWARD YOU; NEVER PUSH THE WRENCH AWAY FROM YOU
TRUE
18-SCREWDRIVERS MAY BE USED FOR PURPOSES OTHER THAN DRIVING OR REMOVING SCREWS, FOR EXAMPLE AS A CHISE
FALSE
19-WHEN SELECTING A STANDARD SCREWDRIVER BE CERTAIN THAT THE TIP IS ALMOST AS THICK AND AS WIDE AS THE SLOT OF THE HEAD OF A SCREW. A. TRUE
TRUE
20-WHEN USING A HACKSAW, SAFETY GLASSES MUST BE WORN
TRUE
21-WHEN YOU ARE FINISHED USING A HACKSAW, TENSION SHOULD BE EASED
FALSE
top related