QUESTION EXCERPT

1-ALWAYS EXAMINE THE TOOL FOR DAMAGES BEFORE USE.

TRUE!

2-IT IS OK TO WEAR LOOSE CLOTHING, DANGLING OBJECTS AND JEWELLERY USING HAND TOOL.

FALSE

3-KEEP CORDS AND HOSES AWAY FROM HEAT, OIL AND SHARP EDGES.

TRUE

4-USE ONLY TOOLS AND EQUIPMENT IN GOOD CONDITION.

TRUE

5-IT IS OK TO MAKE ADJUSTMENTS OR CLEAR A JAM WHILE THE POWER TOOL IS RUNNING

FALSE

6-IF ANY TOOL BREAKS OR MALFUNCTIONS, REPORT IT TO YOUR SUPERVISOR IMMEDIATELY

TRUE

7-BEFORE CONNECTING TO A POWER SOURCE, MAKE SURE THE POWER IS ON.

FALSE

8-SAFETY GLASSES SHALL ALWAYS BE WORN WHENEVER YOU ARE USING POWER HAND TOOL

TRUE

9-THERE ARE SEVERAL TYPES OF POWER TOOLS, INCLUDING ELECTRIC, PNEUMATIC, HYDRAULIC

TRUE

10-NEVER USE ELECTRIC TOOLS IN WET CONDITIONS

TRUE

11-WHEN NOT IN USE, POWER TOOLS SHOULD BE DISCONNECTED

TRUE

12-KEEP SAFE DISTANCE BETWEEN YOUR HANDS AND ALL MOVING PARTS OF THE POWER TOO

TRUE

13-DON’T LEAVE A POWER TOOL UNATTENDED WHILE IT IS RUNNING

FALSE

14-IT IS OK TO STARTLE SOMEONE WHO IS USING A POWER TOOL

FALSE

15-USE SAFETY GUARDS EXACTLY AS THEY ARE SUPPOSED TO BE USED

TRUE

16-WHEN TIGHTENING A NUT WITH AN ADJUSTABLE WRENCH, ALWAYS PULL THE WRENCH TOWARD YOU; NEVER PUSH THE WRENCH AWAY FROM YOU

TRUE

18-SCREWDRIVERS MAY BE USED FOR PURPOSES OTHER THAN DRIVING OR REMOVING SCREWS, FOR EXAMPLE AS A CHISE

FALSE

19-WHEN SELECTING A STANDARD SCREWDRIVER BE CERTAIN THAT THE TIP IS ALMOST AS THICK AND AS WIDE AS THE SLOT OF THE HEAD OF A SCREW. A. TRUE

TRUE

20-WHEN USING A HACKSAW, SAFETY GLASSES MUST BE WORN

TRUE

21-WHEN YOU ARE FINISHED USING A HACKSAW, TENSION SHOULD BE EASED

FALSE