chibi ryanmen chamfering process reverse … · chibi ryanmen smallest multi-blade tools! enable...
Post on 12-Aug-2018
218 Views
Preview:
TRANSCRIPT
Chibi Ryanmen
SmallestMulti-Blade Tools!
Enable front/reverse chamfering and V-grooving●
Reverse chamfering Side V-grooving
Side V-grooveprocess
2Blade 6Blade
Capacity
※ Steel: C2 is maximum※ Stainless Steel: C1 is maximum
※ Clamp screw wrench are supplied as standard accessory
Body
Cuttinng Conditions
General Steel
Alloy Steel
Stainless Steel
Aluminum,Resin,Brass
Cast Steel
Material
material Model
Feed per blade (fz)
ZA20N AA20N
Dry cutting
Processing Example
SPMT030102
Insert
NoneCarbide M20
Carbide M20
11°
〈SPMT030102〉
R0.2
3.6(Except nose R)
φ3.9
7
1.588
φ2.3
Figure MaterialModel.No. Coating
Clamp Screw
Wrench
N-4
L-18
Blades
Corner Chamfering
Bore chamfering
Reversechamferingprocess
CornerChamfering
● According to the shape of work, clamp condition and large or small chamferingamount and position of blade, the cutting condition will have to be adjusted.
●●
In case of large amount chamfering process. please reduce the condition
Usable corner Quantity per box
[Side V-grooving process]Body : TR16-20S
Insert : SPMT030102 AA20N
Result
Good!Without secondary burrs and chattering
Material
Rotation Speed
Table feed
Cutting DepthCutting Oil
・・・・・・・
・・
・・・・・・
・・・
・・・・・
SUS304
1,600r,p,m
380mm/min
1mm
None
※ Inset is not supplied as standard accessory. Please order separately.
In case of chamfering process of Stainless steel, kindly take down cutting
top related