chevrolet 2003-06 silverado - scosche bose premum system location: at speakers speaker sizes antenna...
Post on 18-Mar-2018
215 Views
Preview:
TRANSCRIPT
+12v Constant = Orange +12v Acc. Switch = DATA -12v Chassis Ground= Black/White +12v Illumination = +12v Dimmer =Antenna/Amp Remote =Pink LF+ = Tan LF- = Gray RF+ = Lt. GReen RF- = Drk. Green LR+ = Brown LR- = Yellow RR+ = Drk. Blue RR- = Lt. Blue
Dash Type :
Kit: GM1583B/GM1590ABHarness:
Interface Adapter(s): OnStar/ Non-Bose: GMOS210BOnStar/W/Bose: GMOS2B11B
About the Vehicle
Make: Chevrolet
Model: Silverado
Year: 2003-06
In Dash Application
Wire Color Codes
Speaker Notes
Front Speaker Sizes
Speaker Adapter :
Factory Assembly: Speakers in factory adapter.
Rear Door
Double Din
GM09SR
Factory Assembly:
NOTES
Lower Door : 7'' Midrange
Dimensions:
Dimensions: W= L= D=
NOTES
Lower Door: 5.25'' Midrange
Standard/Optional
Amplifier Locations: Under the center console.
Aftermarket Type: Din/Double Din
W= L= D=
Speaker Adapter :
Speaker Harness :
Speaker Harness :
Type: BOSE Premum System Location: At Speakers
Speaker Sizes
Antenna Adapter: MDA-1
Front Dash: 1.25'' Tweeter
MP3 CompatibleCD PlayerIn-Dash Changer (6 Disc)Bose Audio Navigation SystemOn Star
SILVERADOCHEVROLET
2003-06
Crew Cab
Rear Pillar: 4x6'' Midrange
Images
Front Speaker
Radio Removal
Front Speaker(s)
Rear Door Speaker(s)
Radio
Tweeter
1. Turn Ignition on and shift vehicle into first.2. Trim bezel unsnaps by pulling firmly.3. Using a 7mm socket remove 3 bolts from radio disconnect and remove.
Front Door
1. Remove floor trim.2. Remove Upper back wall panel.3. Extract (2) Philips head screw from side rear panel, Pull panel and remove.
1. Extract (1) 9/32" screw from bottom corner of door panel.2. Extract (1) 9/32" from upper door handle.3. Using a small flat screw driver, remove plastic bezel from door opener handle.4. Pull upwards on door panel, Disconnect and remove.5. Extract (4) T-15 torx screws from speaker, Disconnect and remove.
1. Unsnap and remove A-Pillar panel.
1. Use panel removal tool to remove plastic triangle.2. Use panel removal tool to remove plastic trim bezel around door opener handle.3. Use panel removal tool and remove window control panel, Disconnect and remove. Extract (1) 9/32" screw from behind.4. Extract (1) 9/32" from behind door handle.5. Use panel removal tool and remove door lock and unlock indicator.6. Pull upwards on door panel, Disconnect and remove all connectors.7. Push down on top finger tad of speaker and remove.
Rear Panel (Standard Cab/Extended Cab)
Rear Speaker
"A" Pillar Tweeter
Rear Door (Crew cab)
SILVERADOCHEVROLET
2003-06
top related