cdvi- katalog opreme
Post on 12-Mar-2016
267 Views
Preview:
DESCRIPTION
TRANSCRIPT
c d v i g r o u p . c o m
Product Catalogue ATRIUM Up to 10 Doors Access Control System
CenTAUR Up to 2048 Doors Access Control System *
Keypads & Card Readers
Stand-Alone Systems
Wireless Products
Biometric Fingerprint Readers
Proximity Cards and Badges
Request-to-exit Devices
electromagnetic Locks
Infrared Photocells
Automatic Door Operator
A CDVI Group Company
* Per site
c d v i . c a2 M a n u f a c t u r i n g A c c e s s C o n t r o l S i n c e 1 9 8 5
Ha r d w a r e
SimplicityMerging with Performance
Output Specifications
Lock outputs 2 (12Vdc)
Relay Outputs 2 Form C relays (Dry Contact) 5A/28Vdc
Size
Cabinet size40 cm (H) x 32 cm (W) x 9 cm (D)
15.7” (H) x 12.6” (W) x 3.6” (D)
PCB dimensions 19.9cm (7.83”) x 18 cm (7.09”)
Environment -22°C to 50°C (-4°F to 122°F)
Input Specifications
Reader Inputs/Ports 2
Multi-purpose inputs 10 (20 using zone doubling)
On-board Protection
Auxiliary outputs 1A (12Vdc)Fuseless protection
Communication
Auto-detect hardware modules (No DIP Switches)
On-board Ethernet, RS-485 Bus expansion bus
Electrical Specifications
Power input 85Vac to 264Vac, 50/60Hz
Supply Current 3.3A switching power supply
Battery backup One 12Vdc, 4.5Ah or 7Ah,gel type battery
• Control 2 doors / readers (up to 10 doors with four AX22 2-door expanders)• Embedded Web Server• On-board Ethernet Port with AES 256-bit encryption• 1220m (4000ft) 4 conductor RS-485 expansion bus (No jumpers or DIP switches)• Auto-detect hardware modules • Quick and easy card enrollment procedure• Totally fuseless system• Pre-assembled universal power supply (120V / 240V)• 1,000 users/cards• 100 Access Levels• 100 Schedules each supporting 100 time periods• 1,000 Event Buffer• 10 Partitions• Ultra fast firmware update (less than 10 seconds)• FREE Management Software• Wiegand & ABA Track II magnetic stripe compatible• Maintenance-friendly snap on terminal connectors• Comprehensive LED status indicators
AC22 I 2-Door Controller
The AC22 is ATRIUM’s powerful 2-door main controller. Using AX22 door expansion units, 8 additional doors can be added to the AC22 main controller for a total of 10 doors. The AC22 main controller’s on-board Ethernet port with AES 256-bit encryption includes a user-friendly embedded web server enabling you to manage Users/Cards, lock or unlock doors, view system events and display controller information from any place in the world! The AC22 main controller includes a pre-assembled universal power supply and features an RS-485 auto-detection communication bus eliminating the need for confusing jumper and DIP switch settings. Keep RS-485 cable expenditures to a minimum using common 4 conductor quad cable. Industry-unique and effortless card enrollment mode minimizes system start up and simplifies your life. Implement secure access control quickly without a computer!
NEW
3c d v i . c aM a n u f a c t u r i n g A c c e s s C o n t r o l S i n c e 1 9 8 5
Ha r d w a r e a n d K i t s
AX22 I 2-Door expander
• Control 2 doors / readers• Auto-detect hardware modules• 1220m (4000ft) 4 conductor RS-485 expansion bus (No jumpers or DIP switches)• Field-selectable lock outputs: Dry contact N.C/N.O. - 28Vac/dc 5A -12V, 750mA (Supervised and protected)• Wiegand & ABA Track II magnetic stripe compatible• 10 Inputs (20 using zone doubling technology)• Comprehensive LED status indicators
Up to four AX22 door expanders increase the AC22 main controller’s capacity to 10 doors. Locate the AX22 anywhere on the 1220m (4000ft) 4 conductor RS485 communication bus. Effortless auto-detect technology identifies the AX22 on the communication bus. A pre-assembled universal power supply is included with every AX22 making this unit an industry leader in efficiency and simplicity.
AC22KITB I 2-Door Controller Kit AX22KITB I 2-Door expander Kit
• 1 x AC22 (includes metal box with pre-assembled power supply)• 2 x NANOPB (black proximity readers)• 1 x Master card• 1 x Programming card• 1 x FREE Management Software
• 1 x AX22 (includes metal box with pre-assembled power supply)• 2 x NANOPB (black proximity readers)
NEW
NEWNEW
c d v i . c a4 M a n u f a c t u r i n g A c c e s s C o n t r o l S i n c e 1 9 8 5
we b se r v e r
Manage Users/Cards
The Atrium web server allows you to:
View system events
Lock/Unlock doors and view real-time door status View AC22 controller informations
The innovative ATRIUM embedded web server is fast, simple and secure as can be. From any place in the world, you can do tasks like; user/card management, lock/unlock doors instantly, and view system events. The embedded web server provides instant results using any web browser, smart phone or iPad.
NEW
5c d v i . c aM a n u f a c t u r i n g A c c e s s C o n t r o l S i n c e 1 9 8 5
ty p i c a l i n s ta l l at i o n
Atrium I Fast & easy Card enrollment Mode
Atrium I FRee Software with powerful features
PC
AX222-door/reader
expander module
EXPANDER NEtwORk: Up to 1220 m (4000 ft)from the controller.
«Star» and/or «Daisy Chain» Configuration
(WAN/LAN)
Ethernet (IP)
Siren Reader Reader Printer
AC222-door/reader controller
AX222-door/reader
expander module
AX222-door/reader
expander module
AX222-door/reader
expander module
Atrium System Features
Main Features AtRIUM10 Doors System
Embedded web Server ✔
Users / Cards 1,000 / 1,000
Partitions 10
Inputs 100
Schedules /Periods 100 / 100
Access Levels 100
Event Buffer 1,000
2-Door Expander 4
Time is precious and we all need to be as efficient as possible.With ATRIUM’s straightforward Card Enrollment Mode, adding or deleting cards is easier than ever. Add or delete cards without using a computer. Two simple steps enable this feature and make this a fast and easy solution for you.
Intuitive door configuration settings, clear-cut access level programming, trouble-free user and card settings make advanced system programming a snap! For example, user-friendly and powerful Atrium schedules provide the capabilityto manage complicated tasks very easily. Schedules spanning many weeks or months requiring different time periods (day, evening and night) are quickly achieved with Atrium’s FREE advanced software.
NEW
c d v i . c a6 M a n u f a c t u r i n g A c c e s s C o n t r o l S i n c e 1 9 8 5
INTEGRATED ACCESS CONTROL so f t w a r e
LItECS-AC-LItE
StandardCS-AC-StD
ProfessionalCS-AC-PRO*
EnterpriseCS-AC-ENt*
FREE**
StARtER PACk
Sites 1 64 64 64 1
Serial Ports 1 1 1 4 4
Dial Up connection Yes Yes Yes Yes Yes
tCP/IP connection Yes Yes Yes Yes Yes
Cards 512 2,048 per site(131,072 max.)
8,196 per site(524,544 max.)
16,384 per site(1,048,576 max.) 512
Controllers 16 32 per site(2,048 max.)
64 per site(4,096 max.)
256 per site(16,384 max.) 1
Doors 16 128 per site(8,192 max.)
512 per site(32,768 max.)
2048 per site(131,072 max.) 8
Elevator Control - Yes Yes Yes Yes
Elevator Cabs - 64 per site(4,096 max.)
128 per site(8,192 max.)
512 per site(32,768 max.) 2
Floors per cab - 64 64 64 64
Floor groups - 128 per site(8,192 max.)
128 per site(8,192 max.)
128 per site(8,192 max.) 128
DVR Module - Yes Yes Yes Yes
Visitor Management - Yes Yes Yes Yes
Parking Management - Yes Yes Yes Yes
Guard tour - Yes Yes Yes Yes
Asset Management - Yes Yes Yes Yes
* Comes with a workstation license New ** FREE from our web site, www.cdvi.ca Security dongle NOt required
INTEGRATED ACCESS CONTROL Version 5.1
Asset Management FeatureWhy buy something that you already have? Keep track of your assets and save time and money. Quickly find who is in possession of your assets and for how long.
Guard Tour FeatureLive interactive guard tour allows check point validation using card readers, key switch inputs or data collectors. Includes live alarms for time violations and intuitive exception reports.
7c d v i . c aM a n u f a c t u r i n g A c c e s s C o n t r o l S i n c e 1 9 8 5
Visitor Management
Centaur’s Visitor Module can monitor and record all visitors
coming to your premises. Preserves a complete record of
all visitor activities and keeps each visitor’s information
for subsequent visits.
Centaur’s Visitor Module
will securely validate the
comings and goings of
all visitors.
INTEGRATED ACCESS CONTROL so f t w a r e Mo d u l e s
FrontView - Live Interactive Floor Plans • Create or import floor plans with 64 interactive icons per
plan• Complete library of interactive icons (or create your own)• Powerful event-based trigger actions• View, control and zoom into any area, device or object• Automatically display the area where an alarm occurs
Database UtilityManage large, complex database files with this simple
utility. Backup/Restore events and system configuration
automatically or on demand with ease.
FrontGuard - Visual IdentificationDisplay real-time video and compare the person accessing a
door to the picture associated to the card in the database.
LocatorMonitor the location (inside/outside) of each card holder in
real-time. View/Print reports with a click of a button. Obtain
detailed card holder information with a double-click of the
mouse button. Excellent for muster-point applications.
WavePlayerPlay an audible sound on any system event. Perfect for advising a system operator that an alarm condition exists even if he/she is not watching the monitor at all times.
DVR ModuleCentaur video (DVR) module lets you playback up to 60
seconds before and after a specific event. Capture and
save video image (frame) in jpeg format during playback
or live viewing.
Parking Management
Centaur Parking Management provides a parking
activity monitor. Quickly view how many parking spaces
are used, by which user and how many parking spaces
are available. Manually allocate or free parking spaces.
Activate a “PARKING FULL” sign, when the parking
capacity is reached.
Finally, generate reports
on parking usage and
activities.
Pro-Report - Report Generation module
• User-friendly wizard for generating reports.• Create quick one-time reports, 125 pre-defined reports
and 50 scheduled reports.• Multiple report types: System events, system
configuration, time & attendance, absence, access, operator actions, custom card and input counting reports.
• Export reports in multiple formats (ASCII, CSV, Excel, PDF, and more...)• Time & Attendance data acquisition.
c d v i . c a8 M a n u f a c t u r i n g A c c e s s C o n t r o l S i n c e 1 9 8 5
INTEGRATED ACCESS CONTROL Ha r d w a r e
LCD DisplayCK-TRAK-L
(Max. 8 per CT-V900-A)
Elevator ControllerCA-A480-A
(Max. 8 per CT-V900-A)
RelayExpander Module
CA-A460-P(Max. 2 per CT-V900-A)
2-DoorExpander Module
CA-A470-A(Max. 3 per CT-V900-A)
server to controller coMMunication
Optional NetworkedWorkstation
to other Ct-V900-A controllers
e-bus networK Module capacity
to PC Centaur ServerSee diagram above
Furthest modules can be up to 1220m
(4000ft) away from the CT-V900-AFurthest controller can be up to 1220m
(4000ft) away from first CT-V900-A
FirstCT-V900-A controllerof a site
9c d v i . c aM a n u f a c t u r i n g A c c e s s C o n t r o l S i n c e 1 9 8 5
INTEGRATED ACCESS CONTROL Ha r d w a r e
• Control 2 doors/readers per CT-V900-A (up to 8 using three CA-A470-A 2-door expander modules, see page 6)• On-board card database• 256 Schedules• 256 Access Levels • 2048 Event Buffer• Fully distributed database architecture (access decisions made locally)• Upgradable firmware - Upload firmware via the computer• E-Bus technology: expander modules can be up to 1220m (4000ft)
from the CT-V900-A• Supports most common Wiegand formats, magnetic Stripe Track II
ABA and 9 keypad formats, including BCD• Easy maintenance with snap-off terminal blocks• Lithium battery protection in case of complete power failure• Comprehensive LED status indicators
CT-V900-A I 2-Door Controller
The CT-V900-A is at the heart of every Centaur access control system. The Centaur Server, hardware expander modules, multi-purpose inputs, card readers, keypads and outputs are connected directly to the CT-V900-A. Multi-controller systems are joined together via the RS-485 communication bus. Distributed database architecture allows each controller to make split-second decisions without the need of the server computer. Lightning-quick, robust and remarkable stability make the CT-V900-A the professional’s choice.
Output Specifications:Lock outputs: 2 field-selectable (12 or 24Vdc)Relay Outputs: 2 Form C Dry Contact 5A/28VdcReader Outputs: Six 50mA Open collector outputs (Red/Green LEDs, Buzzer)
Input Specifications:Reader Inputs/Ports: 2Keypad Inputs/Ports: 2Multi-purpose Inputs: 16 (using ATZ 2R/3R)
Physical Specifications:Cabinet size: 39cm (H) x 33cm (W) x 10cm (D) 15.5” (H) x 13” (W) x 4” (D)PCB dimensions: 24.5cm (9.65”) x 20.2cm (7.95”)Environment: 5°C to 55°C (41°F to 133°F)
Electrical Specifications:Power input: 24Vac, 75VA or higher, 50/60HzSupply current: 2.5A switching power supply maximumBattery backup: Two 12Vdc, 7Ah, gel cell batteries
Communication:Plug and play technologyRS-485 E-Bus for expander modules, RS-485, TCP/IP, RS-232 or modem
On-board Protection:Auxiliary outputs: 2.5A (24Vdc), 1A (12Vdc & 5Vdc) fuseless protectionAC protection: 5A fuseBattery reversal: 7A fuse
c d v i . c a10 M a n u f a c t u r i n g A c c e s s C o n t r o l S i n c e 1 9 8 5
Ha r d w a r e
Reduce field-wiring costs by running only one cable to the CT-V900-A. Reader, Keypad, Door Contact, REX device and Reader Outputs can be connected locally to the CA-A470-A by installing the expander module close to the doors.
CA-A470-A I 2-Door expander Module
CA-A460-P I Relay expander Module
• Adds 7 form C relay outputs (5A/28Vdc) to the CT-V900-A controller• Up to 2 CA-A460-P modules per CT-V900-A controller • E-Bus connectivity to the CT-V900-A up to 1220m (4000ft)• Power Requirements: 12Vdc• Current consumption: 50mA (typical), 400mA (maximum)
• Control 2 readers and/or keypads• Up to three CA-A470-A modules per CT-V900-A• 2 form C relays 15A/28Vdc, N.C./N.O. lock outputs• 4 Inputs (door contacts and REX devices)• 6 open collector, 50mA Sink, reader outputs• E-Bus connectivity to the CT-V900-A up to 1220m (4000ft)• Supports most common Wiegand formats, Magnetic Stripe Track II
ABA, BCD keypad formats• Comprehensive LED status indicators
CK-TRAK-L I Tracker LCD Display
Specifically designed to work with Pro-Report’s time and attendance feature, the CK-TRAK-L acts as a “monitor” to display employee name, the date, time and “Punch In / Punch Out” to the employee/card user.
• Adjustable backlight and contrast• Display unit for time and attendance• 32-character LCD display (2 lines – 16 characters each)• Can be used with Anti-passback applications to display user locations• Power Requirements: 9 to 16Vdc• E-Bus connectivity to the CT-V900-A up to 1220m (4000ft)• LCD: Super Twisted Nematic display (STN) Wide viewing angle• Up to 8 CK-TRAK-L modules per CT-V900-A controller
INTEGRATED ACCESS CONTROL
CA-A360-A CA-A360-USB
11c d v i . c aM a n u f a c t u r i n g A c c e s s C o n t r o l S i n c e 1 9 8 5
Ha r d w a r eINTEGRATED ACCESS CONTROL
CA-A370-P I RS-485 network Hub
CA-A360-A I RS-232 to RS-485 ConverterCA-A360-USB I RS-232 and/or USB to RS-485 ConverterThe CA-A360-A and CA-A360-USB converters, installed between the Centaur Server and the CT-V900-A controllers, allow a “daisy-chain” configuration thus extending the total connection distance to 1220m (4000ft). The LEDs provide easy and visual identification of the module’s Power and communication status.
Enables “star” type network configuration of the RS-485 bus. Excellent for large or multi-floor buildings/sites where a “daisy chain” RS-485 configuration is not feasible. Locate the CA-A370-P in a central location along an existing RS-485 network and run 4 individual RS-485 networks out to the controllers or expander modules.
• Converts RS-232 protocol to RS-485 protocol (CA-A360-A)• Converts RS-232 or USB protocol to RS-485 protocol (CA-A360-USB)• Allows a total of up to 1220m (4000 ft) of RS-485 cabling• Work with UTP cable (Cat 5)• Transmit, Receive and Power status LEDs• Power Requirements: 12Vdc or via USB power• Current consumption: 100mA max• Operating temp: -10°C to 55°C (14°F to 131°F)
• RS-485 “star” configuration is a snap• Provides a higher network isolation from noise• Saves on wiring costs• LED indicators for power, network and port activity• Create 4 independent RS-485 networks from 1 RS-485 network• Connects to the CT-V900-A RS-485 and E-Bus communication ports• Connect controllers or expander modules up to 1220m (4000ft) from the hub• Power Requirements: 10 to 14.6Vdc• Current consumption: 190 mA typical• Operating temp: -10°C to 55°C (14°F to 131°F)
Minimize field wiring costs by using existing LAN/WAN networks. We have the solution at a very aggressive price. This unit enables RS-232 serial devices such as the CT-V900-A to communicate over a LAN/WAN network.
CA-eTHR-A I TCP/IP – RS-232 Converter
• Converts TCP/IP protocol to RS-232• Simple programming & setup• Static IP Addressing• RJ-45 connection to the LAN• LED status indicators• RS-232 serial connector supplied• Supports TCP/IP, HTTP, ICMP and
ARP protocols
• Ethernet Compatibility: Version 2.0/IEEE 802.3• 10 MBPS – Half Duplex• 9600, 19200 and 38400 baud rates• Serial format: 8 data bits, 1 Stop bit, No Parity• PCB Dimensions: 10cm x 6.4cm (4in x 2.5in)
c d v i . c a12 M a n u f a c t u r i n g A c c e s s C o n t r o l S i n c e 1 9 8 5
Connected to the CT-V900-A controller’s expander bus, each CA-A480-A can control up to 16 floors. The CA-A480-A floor control relays can be interfaced directly with an elevator’s floor control buttons. When a valid card is presented, the appropriate floor control relays will become enabled allowing the cardholder to select the desired floor.
CA-A480-A I elevator Controller
CA-A110-P I Lock Control Module
CA-A482-P I Destination Reporting ModuleConnected on top of the CA-A480-A, the DRM has 16 Floor Selection inputs, one for each floor control relay of the CA-A480-A elevator controller. Once a card is presented, the user can only select one floor. Once the floor is selected, all other floor selection buttons are de-activated. The user must present his card again in order to select another floor. Each card swipe and individual floor selection is recorded by the system.
The CA-A110-P has been designed to reduce installation time and simplify the connection of electromagnetic locks or in conjunction with door strikes. It is directly inserted into the CT-V900-A’s lock terminals.
• 16 Form “C” floor control relays (15A/28Vdc, N.C./N.O.)• 1 Fire control input + 1 Tamper input• Control up to 64 floors and 2 elevator cabs• Destination reporting (requires CA-A482-P)• E-Bus connectivity to the CT-V900-A up to 1220m (4000ft)• Backup battery with selectable battery charge current• On-board 12Vdc power supply• Fully supervised (tamper, low battery and AC failure) with LED display• Up to 8 CA-A480-A controller per CT-V900-A controller
• Connects directly onto the CA-A480-A elevator controller• One-card swipe, one-floor operation• User must present a valid card to select a floor button.• 16 floor-selection inputs and LED indicators• Records Valid and Invalid floor selections• Power input: 5Vdc• Current consumption: 28mA (typical), 108mA (max)• DC input activation: 15Vdc (minimum), 165Vdc (max)• Connection method: 14-way Flat Cable to CA-A480-A
• Simplifies the installation of dual-locking doors (2 mag locks or combination of a mag lock and a door strike)• Lock outputs: 2 form C relays rated at 5A/12Vdc, N.C./N.O.• 2 relay status LEDs• Connects directly to the CT-V900-A lock output terminals• Current consumption: 100mA
Ha r d w a r eINTEGRATED ACCESS CONTROL
13c d v i . c aM a n u f a c t u r i n g A c c e s s C o n t r o l S i n c e 1 9 8 5
2-DoorMKIT I 2-Door Master Kit
2-DooreKIT I 2-Door expander Kit
4-DoorMKIT I 4-Door Master Kit
8-DoorMKIT I 8-Door Master Kit
Ki t sINTEGRATED ACCESS CONTROL
• 1 x CT-V900-A with metal box• 1 x CA-A470-A with metal box• 4 x DGLP FN WLC26 proximity readers• 1 x 8-Door StarterPack Centaur software• 1 x DB9FF10 Female-Female DB9 10 meter cable• 1 x CDVI150 Transformer (Can supply 1 x CT-V900-A and 3 x CA-A470-A)• Kit without metal box: 4-DoorMkIt-NB
• 1 x CT-V900-A with metal box• 2 x DGLP FN WLC26 proximity readers• 1 x 8-Door StarterPack Centaur software• 1 x DB9FF10 Female-Female DB9 10 meter cable• 1 x CDVI150 Transformer (Can supply 1 x CT-V900-A and 3 x CA-A470-A)• Kit without metal box: 2-DoorMkIt-NB
• 1 x CA-A470-A with metal box• 2 x DGLP FN WLC26 proximity readers• Kit without metal box: 2-DoorEkIt-NB
• 1 x CT-V900-A with metal box• 3 x CA-A470-A with metal box• 8 x DGLP FN WLC26 proximity readers• 1 x 8-Door StarterPack Centaur software• 1 x DB9FF10 Female-Female DB9 10 meter cable• 1 x CDVI150 Transformer (Can supply 1 x CT-V900-A and 3 x CA-A470-A)• Kit without metal box: 8-DoorMkIt-NB
c d v i . c a14 M a n u f a c t u r i n g A c c e s s C o n t r o l S i n c e 1 9 8 5
CDVI150 I 150VA Transformer
• Reads CDVI Wiegand 26-bit card encoding• 10 cm (4 in) read range• Illuminated card reader (Blue, green and red).• Audible feedback• PCB sealed in epoxy• Operating temp.: -30°C to 60°C• Power requirements: 12Vdc
• Reads CDVI and most popular 26-bits Wiegand card encoding• 10 cm (4 in) read range• Illuminated card reader (Blue, green and red).• Audible feedback• PCB sealed in epoxy• Operating temp.: -30°C to 60°C• Power requirements: 12Vdc
• Reads CDVI Wiegand 26-bit card encoding• 10 cm (4 in) read range• Illuminated card reader (Blue, green and red).• Audible feedback• PCB sealed in epoxy• Operating temp.: -30°C to 60°C• Power requirements: 12Vdc
nAnOPB I Mini Wiegand Proximity Reader
SOLARPB I Multi-Technology Proximity Reader
nAnOPW I Mini Wiegand Proximity Reader
• Reads CDVI and most popular 26-bits Wiegand card encoding• 10 cm (4 in) read range• Illuminated card reader (Blue, green and red).• Audible feedback• PCB sealed in epoxy• Operating temp.: -30°C to 60°C• Power requirements: 12Vdc
STARPB I Mullion Proximity Reader
• Reads CDVI and most popular 26-bits Wiegand card encoding• 10 cm (4 in) read range• Illuminated card reader (Blue, green and red).• Audible feedback• PCB sealed in epoxy• Operating temp.: -30°C to 60°C• Power requirements: 12Vdc
STARPW I Mullion Proximity Reader
NEWNEW
NEWNEW
NEWNEW
• Secondary voltage: 16Vac and 24Vac• Volt-ampere: 150VA (75VA at 16Vac + 75VA at 24Vac)• Primary voltage: 120V (Fuse protected)• Frequency: 60Hz
• Secondary screw wiring terminals• Weight: 7 Lbs (3.2 Kg)• Available in 200VA: CDVI 200, (100VA at 16Vac + 100VA at 24Vac) CDVI200 supply up to 2 CT-V900-A (24Vac)
and Up to 6 CA-A470-A (16Vac)
tr a n s f o r M e r s / re a d e r s
• Reads CDVI and most popular 26-bits Wiegand card encoding• 10 cm (4 in) read range• Illuminated card reader (Blue, green and red).• Audible feedback• PCB sealed in epoxy• Operating temp.: -30°C to 60°C• Power requirements: 12Vdc
SOLARPW I Multi-Technology Proximity Reader
DGLI F WLC26
DGLI WLC26
DGLP FN WLC26
DGLP WLC26
15c d v i . c aM a n u f a c t u r i n g A c c e s s C o n t r o l S i n c e 1 9 8 5
Ke y pa d s & ca r d re a d e r s
• Heavy-duty ZAMAK cast alloy (Zinc, Aluminium, Magnesium and
Copper)• Eye-catching bright blue back-
lighting • Potted electronics• Integrated Piezo/Buzzer• Power requirements: 12Vdc
Galeo/W I 26-Bit Wiegand Back-Lit Keypad
• Stainless Steel construction• 26-Bit Wiegand output• Call button• Potted Electronics• Integrated Piezo/Buzzer• Power requirements: 12Vdc
KCP/BP/26W I 26-Bit Wiegand Keypad
• Rugged polycarbonate• 26-bit format Wiegand output, • Compatible with CDVI, Centaur
(Position Technology) and most 26-bit format cards.• Up to 8cm (3.5 in) read range• Potted electronics• Red/Green LEDs and Buzzer• Power requirements: 12Vdc
• Rugged polycarbonate• 26-bit format Wiegand output• Up to 8cm (3.5 in) read range• Potted electronics• Red/Green LEDs and Buzzer• Power requirements: 12Vdc
• Stainless steel proximity reader• Dust/Weather/Vandal resistant• 26-bit format Wiegand output, • Compatible with CDVI, Centaur
(Position Technology) and most 26-bit format cards.• Up to 8cm (3.5 in) read range• Potted electronics• Red/Green LEDs and Buzzer• Power requirements: 12Vdc
DGLP WLC26 and DGLP Fn WLC26 Multi-Technology Wiegand Proximity Reader
DGLP M WLC I Mifare® Proximity Reader
DGLI WLC26 and DGLI F WLC26Multi-Technology Wiegand Proximity Reader
• 60 cm (23.5 in) read range• Selectable CDVI Wiegand output:
26, 30 or 44 bit format• Compatible with CDVI, Centaur
(Position Technology) and most 26-bit format cards.• Red/Green LEDs and Buzzer• Operating temp.: -30°C to 60°C• Power requirements: 12Vdc
DGLP60WLC I Wiegand Long Range Reader
• Vandal proof housing• Backlit keys• Compatible with CDVI, Centaur
(Position Technology) and most 26-bit format cards.• Red/Green LEDs and Buzzer• Operating Temperature : -25°C to 70°C
KCPROXWLC I Proximity card reader and keypad
• Stainless steel proximity reader• Dust/Weather/Vandal resistant• 26-bit format Wiegand output• Up to 8cm (3.5 in) read range• Potted electronics• Red/Green LEDs and Buzzer• Power requirements: 12Vdc
DGLI M WLC I Mifare® Proximity Reader
CPeCP PPC
PPBP
c d v i . c a16 M a n u f a c t u r i n g A c c e s s C o n t r o l S i n c e 1 9 8 5
Cards are automatically enrolled in CENTAUR database. Simply present the badge in front of the unit and the code is transmitted into the PC in the cardholder file.Delivered with a proximity reader head. It is possible to add other modules.Other reader heads sold separately:
• MA: “Dallas” type reader• MI: infrared• MR: RF receiver• MM: magnetic stripe
BP: Elegant leather key ring tagCPE: Standard clamshell cardCP: Thin card for printing photos and text (ISO)PPC: Rugged gray polycarbonate key ring cardPP: Stylish black polycarbonate tear drop card, available for Mifare® proximity reader: PVP
Proximity Cards and Badges
ca r d s a n d ta g s
CMPP I Card enrolment Unit
• Built-in CDVI 26-bit Weigand format• High-intensity LED technology• Excellent for service technicians• Rechargeable Lithium battery
• High resistant steel tag• Tag sealed in epoxy• CDVI 26-bit Weigand format• 125 kHz proximity card• Also available: METAL: Mifare® 13.56 Mhz METAL2: Tag encoding for
PosiProx, PosiPin and PosiXtend readers
• CDVI 26-bit Weigand format• 85 mm x 54 mm x 1.8 mm• 125 kHz proximity card• Sequentially generated decimal
card numbers (printed on each card)• Also available with encoding for
PosiProx, PosiPin and PosiXtend readers: 702
• CDVI 26-bit Weigand format• Printable on both sides• 85 mm x 54 mm x .8 mm• 125 kHz proximity card• Sequentially generated decimal
card numbers (printed on each card)• Also available with encoding for
PosiProx, PosiPin and PosiXtend readers: 706
• CDVI 26-bit Weigand format• Polycarbonate tag• 40 mm x 33 mm x 4 mm• 125 kHz proximity card• Sequentially generated decimal
card numbers (printed on each card)• Also available with encoding for
PosiProx, PosiPin and PosiXtend readers: 704
• CDVI 26-bit Weigand format• Adhesive on one side• 20 mm (Dia) x 1.5 mm (H)• 125 kHz proximity card• Sequentially generated decimal
card numbers (printed on each card)• Also available with encoding for
PosiProx, PosiPin and PosiXtend readers: 708
LeDTAG I Solar LeD light with built-in key tag
MeTAL1 I Proximity Key Holder Steel Tag
CS I Standard clamshell card
ISO I Printable ISO Card
BTAG I Blue Key Tag
DISCTAG I Mini PVC Tag
These proximity cards and tags arerandomly generated hexadecimal card numbers
PROMI DG1
17c d v i . c aM a n u f a c t u r i n g A c c e s s C o n t r o l S i n c e 1 9 8 5
PROMI / DG1 I 2-Door Stand-Alone Keypad
• Surface mount keypad• 500 user codes (5 digits)• Audible & Visual feedback• 1 form C output and 1 N/O output,
timed (1 to 99 sec.) or latched• 2 request-to-exit inputs
• All programming stored in non-volatile EEPROM memory
• Power requirements: 12Vac/dc• Consumption: 120mA• Optional remote keypad: KCP/BP
C2R100/US I Keypad with Built-in Controller• Fluorescent keypad keys• Stainless steel faceplate• Mounts on a singlegang box• 150 user codes• 3 to 6 digit codes• Programmable audible feedback buttons• Up to three outputs (2 relays & 1 open-collector)
• Illuminated stainless steel keypad• 100 user codes (4 or 5 digits)• 2 form C outputs (8A/250V), timed (1 to 99 sec.) or latched• Audible and visual feedback• Request-to-exit input• Potted electronics• Power requirements: 12/24 Vac or 12/48 Vdc
PROFIL100eC I Keypad with Remote Controller
• Illuminated stainless steel keypad• 100 user codes (4, 5 or 6 digits)• 2 form C outputs (8A/250V), timed (1 to 99 sec.) or latched• Audible feedback buttons• Request-to-exit input• Potted electronics• Power requirements: 12/24 Vac or 12/48 Vdc• Available with call button (Door bell/
Chime): KCIEN
KCIen/SBP I Illuminated Keypad with Built-in Controller
sta n d-alo n e sy s t e M s
Galeo I Back-Lit Keypad with Remote Controller• 100 user codes (4 or 5 digits)• Request-to-exit input• Programmable audible feedback buttons• Power: 12/48Vdc or 12/24Vac• GALEO: 1 relay output GALEO2: 2 relay outputs GALEO3: 3 relay outputs• Timed (1 to 99 sec.) or latched output
• Built-in controller• 100 user codes (3 to 8 digits)• Request-to-exit input• Easy setup• Audible and visual feedback• Power requirements: 12Vdc/ac
PROMI eCO I 1-Door Stand-Alone Keypad
• Remote keypad for PROMI or DG1• High security stainless steel
construction• Call button• Audible feedback buttons• Programming made from the “host”
keypad.• Power requirements: 12Vac/dc
KCP/BP I Remote Keypad
PROMI500 DGPROX
DGLI/F
DGLI
DGLP/FN
DGLP
c d v i . c a18 M a n u f a c t u r i n g A c c e s s C o n t r o l S i n c e 1 9 8 5
• 1000 users (proximity card and/or codes)• 3 operating modes: - Mode 0: card and code - Mode 1: card only - Mode 2: card or code• 1000 event memory• 16 holiday schedules
• Real-time event printing• Supports anti-passback• 1 request-to-exit input & 1 Tamper switch• Audible & Visual feedback• 1 form C, door relay output (3A/125V)• 1 form C, alarm relay output (3A/125V)• Power requirements: 12Vac/dc
sta n d-alo n e sy s t e M s
PROMI1000 I 1-Door Stand-Alone Proximity Reader and Keypad
• Remote readers for PROMI1000, PROMI500 and DGPROX• Surface mount• Up to 50M (164ft) between the
reader and the controller• Up to 8cm (3.5 in) read range• LED visual feedback• Power requirements: 12V ac/dc
• Remote readers for PROMI1000, PROMI500 and DGPROX• Vandal resistant• Up to 50M (164ft) to the controller• Up to 8cm (3.5 in) read range• LED visual feedback• Power requirements: 12V ac/dc
DGLP / DGLP/Fn I Polycarbonate Proximity Reader DGLI / DGLI/F I Stainless Steel Proximity Reader
• 500 users (proximity card and/or codes)• 3 operating modes: - Mode 0: card and code - Mode 1: card only - Mode 2: card or code• Audible & Visual feedback
• 1 request-to-exit input• Tamper switch• 1 form C, door relay output
(3A/125V)• 1 form C, alarm relay output
(3A/125V)• Power requirements: 12VAC/DC
PROMI500 / DGPROX I 1-Door Stand-Alone Proximity Reader and Keypad
SeF2405 / 2410 / 2420 /2420AVn I Infrared Photocell Detector
• Power requirements: 12/24Vdc• Operating temperature: -20°C / +55°C• SEF2405: Flat infrared photocell, range: 5M (16.5ft)• SEF2410: Flat infrared photocell, range: 10M (33ft)• SEF2420: Adjustable infrared photocell, range: 20M (66ft)• SEF2420AVN: Vandal-proof adjustable infrared photocell,
range: 20M (66ft)SEF2405 and
SEF2410SEF2420 SEF2420AVN
19c d v i . c aM a n u f a c t u r i n g A c c e s s C o n t r o l S i n c e 1 9 8 5
• Shearlock• Self-Aligning• Power requirements: 12/24 Vdc • Current Draw: 600 mA @ 12 Vdc
and 300 mA @ 24 Vdc• Compact mortise-mount• 206mm (H) x 30mm (W) x 32mm
(D) (8” x 1.2” x 1.25”)• Optional surface mount kit (KCZ 3000)
• Surface mount installation• Power requirements: 12/24Vdc• Current Draw: 550mA @ 12Vdc, 270mA @ 24Vdc• Zinc EM surface and anodized
aluminum housing• Flush mount installation: V3E• Optional monitoring sensor: V3SR
• Retrofit electromagnetic door handle• Complete Aluminium housing• Power requirements: 12/24Vdc• Current Draw: 560mA @ 12Vdc, 270mA @ 24Vdc• 40 cm (H) x 12,6 cm (W) x 6,8 cm (D)
(15,75 in x 5 in x 2,7 in)
• Flush mount installation• Sliding door applications• Power requirements: 12/24Vdc• Current Draw: 550mA @ 12Vdc, 270mA @ 24Vdc• 266mm (H) x 66mm (W) x40mm (D)
(10.5in x 2.5in x 1.5in)• Stainless steel
• Exterior applications & High-traffic areas• Power requirements: 12/24Vdc• Current Draw: 550mA @ 12Vdc, 280mA @ 24Vdc• 220mm (H) x 64mm (W) x 40mm(D)
(8.6in x 2.5in x 1.5in)• Optional monitoring sensor: VSI5R
• Shearlock door handle• Patented self-aligning mechanism• Input voltage: 12, 24 or 48V dc• Current Draw: 460mA@12Vdc, 230mA@24Vdc & 150mA@48Vdc• Available in black: PWM25PSR/RAL NOIR
• Shearlock flush mount installation• Patented self-aligning mechanism• Input voltage: 12, 24 or 48V dc• Current Draw: 460mA@12Vdc, 230mA@24Vdc & 150mA@48Vdc• Surface option: PWM25SR
• Visual feedback (red & green)• Surface mount installation• Out-In-swinging door applications• Power requirements: 12/24Vdc• Current Draw: 550mA @ 12Vdc, 270mA @ 24Vdc• 268mm (H) x 75mm (W) x 40mm
(D) (10.5in x 3in x 1.5in)• Optional monitoring sensor: V5SR
el e c t r o M a g n e t i c lo c K s
V3S I 300kg (660lbs) Holding Force P400Rn I 400kg (880lbs) Holding Force
V5S I 500kg (1100lbs) Holding Force V5eI I 500kg (1100lbs) Holding Force
CZ3000 I 1500kg (3300lbs) Holding ForceVSI5R I 500kg (1100lbs) Holding Force
PWM25PSR I 800kg (1750lbs) Holding Force PWM25eR I 800kg (1750lbs) Holding Force
c d v i . c a20 M a n u f a c t u r i n g A c c e s s C o n t r o l S i n c e 1 9 8 5
wi r e l e s s
• Heavy-duty construction• Range up to 200 m (650 ft)• Elegant & easy to carry• Available in: Black (SETR2641AM2.K), (Dark Gray
(SETR2641AM2.N), Red (SETR2641AM2.R), Blue (SETR2641AM2.B) and Burgundy (SETR2641AM2.C)
• 60 x 36 x 16mm (2.35 x 1.4 x 0.6in)• Two lithium batteries (CR2016)
• Elegant & easy to carry• Range up to 200 m (650 ft)• 60 x 36 x 16mm (2.35 x 1.4 x 0.6in)• Two lithium batteries (CR2016)
CDVI high quality RF transmitters/receivers are the perfect solution to operate parking lot gates, garage doors, handicap doors, etc. These 433.92 MHz radio frequency systems offer longer range up to 250m (820ft), less interference jamming and excellent reliability. Licensed KeeLoq® Rolling Code technology ensure ultra-secure transactions.
• 26-bit Wiegand output• Power: 12 or 24V (AC or DC)• Dimensions: 105 x 45 x 28mm
(4.3 x 1.75 x 1.1in)• Compatible with Centaur or any
26-bit Wiegand-capable systems
• Outdoor installations ( IP55).• Frequency : 433,92 MHz.• Encoding : Keeloq® Hopping code• Supply : 3 V Lithium battery
(CR123A)• Range up to 400 m (1300 ft)• Dimensions: 90 x 60 x 25 mm
• Palm-size transmitters 83 x 48 x 16mm (3.25 x 1.9 x 0.6in)• Range up to 250 m (820 ft)• Ergonomic & stylish design• Rugged & durable• One 12V lithium battery (L1028 or 23A)
• Innovative and heavy-duty construction
• Casing: aluminum and black polycarbonate
• Range up to 200 m (650 ft)• 70 mm x 40 mm x 10 mm (2.75 in. x 1.57 in. x 0.4 in.)• One lithium battery (CR2032)
S2TR2641e2 I 2-Channel TransmittersS2TR2641e4 I 4-Channel Transmitters
S7TR2641e4 I 4-Channel Transmitters
SeTR2641AM2X I 2-Channel Mini Transmitters
SeLWR433 I Wiegand Wireless ReceiverFKT2641e1 I 1-Channel Key Free Transmitter
These transmitters are also available with CDVI or HID
built-in proximity tag
NEW
NEW
SeTR2641AM1 I 1-Channel Mini Transmitter
21c d v i . c aM a n u f a c t u r i n g A c c e s s C o n t r o l S i n c e 1 9 8 5
• Increase reception and/or range• 11.5ft (3.5m) coaxial cable (RG 58) included • “L”-shaped bracket for wall-mounting
SeA433 I 433Mhz Tuned Antenna
wi r e l e s s
• Up to 85 transmitter keys• 1 NO relay + 1 NO/NC relay (24VA)• Self-learning memorization• Standard pulse output relay• Power requirements: 12/24Vac/dc• Dimensions: 105 x 45 x 28 mm (4.3 x 1.75 x 1.1in)• Available with pulse, latched
or delayed relay output: SEL2641R433IP
• Up to 500 users with 1 or 2 channel transmitters• 1 NO relay + 1 NO/NC relay (24VA)• Pulse, latched or delayed relay output• Power requirements: 12/24Vac/dc• Dimensions: 105 x 45 x 28 mm (4.3 x 1.75 x 1.1in)
SeL2641R433I2-Relay Stand-Alone Wireless Receiver
SeL2641R433IP52-Relay Stand-Alone Wireless Receiver
SeL2641R433C2P2-Relay Stand-Alone Power Wireless Receiver
SeL2641R433-K8P I Multi-user Receiver
• Up to 85 transmitter keys• 1 NO relay + 1 NO/NC relay (230Vac)• Relays with Pulse, latched or delayed
operating mode.• Power requirements: 12/24Vac/dc• 4 relay model: SEL2641R433C4P
• 800 transmitters• Programming through a PC with
optional software kit (SEL2641-KITP8) or with a master transmitter S2TR2641E2M
• 1600 transmitter model: SEL2641R433-k16P
• Use to Upload/Download all programming of the multi-user receiver SEL2641R433K8P
• Also available for the multi-user receiver SEL2641R433-K16P: SEL2641MEMB16
SeL2641MeMB I Plug-in Memory Back-Up
• Kit for SEL2641R433-K8P• Includes: Software (PCCOM), USB
driver, all necessary cables and a plug-in memory back-up
• Also available for multi-user receiver SEL2641R433-K16P:
SEL2641-KITP16
SeL2641-KITP8Software Kit for Multi-User Receiver
SeL2641R433-Z4 I 4-Relay Stand-Alone Receiver
• Up to 85 transmitter keys• 2 NO relay + 2 NO/NC relay• Standard pulse output• Relay 4 supports latched output• Voltage: 12/24Vac/dc
DWPS106SCDDWPS106ACD
SETR2641AM2
S2TR2641E2 & E4 S7TR2641E4
c d v i . c a22 M a n u f a c t u r i n g A c c e s s C o n t r o l S i n c e 1 9 8 5
DWPS106ACDAutomatic door operator with articulated arm(Pushes the door)
DWPS106SCDAutomatic door operator with sliding arm(Pulls the door)
System identification
Ref. DescriptionInput
Voltage(Vac)
DimensionsL x H x D
Door Weight(kg)
Door Width(m)
Consump-tion
(mA)
DWPS106ACD Door operator with an articulated arm for outward opening door (pushes the door) 16Vac 509 x 90 x 110
(20 x 3.5 x 4.3 in.)100kg
(220 Lbs)1 meter(3,28 ft) 200mA
DWPS106SCD Door operator with a sliding arm for inward opening door (pulls the door) 16Vac 509 x 90 x 110
(20 x 3.5 x 4.3 in.)100kg
(220 Lbs)1 meter(3,28 ft) 200mA
Compatible wireless transmitters:Ref. Description
S2TR2641E2 oR E4 2 or 4-channel transmitter
SETR2641AM2 2-channel Mini transmitter (Available color: black, blue, red, dark grey or burgundy)
S7TR2641E4 4-channel robust & innovative transmitter
Inward openingOutward opening
Automatic door operator suitable for single doors, inward or outward opening, left or right handed and with fail safe or fail secure locking.
• Integrated wireless receiver (includes 1 transmitter: S2TR2641E2)• Adjustable pause time• Stand-alone or connects to an access control system• Obstacle detection• Operating Modes: - Free Gate - Automatic - Always open• Electronic calculation of speed and movement• Includes backup battery
do o r op e r at o r s
EXIT-BLP EXIT-BSP
23c d v i . c aM a n u f a c t u r i n g A c c e s s C o n t r o l S i n c e 1 9 8 5
DGID/W/US I Wiegand Fingerprint Reader
USB SCAnneR I Fingerprint enrolment unit PCMB I Mifare® tag programmer for Cabaprox
• 26, 30 or 44-bit wiegand output• Self cleaning sensor area• 3 LED’s to indicate sweeping
direction• Upgradable firmware• Tamper switch• Power requirements: 12V ac/dc• Work in stand-alone mode (Stores up to 350 fingerprints)
• High quality fingerprint• Self-cleaning sensor• Automatic finger detection• Drivers for Microsoft Windows
2000, XP and Vista• Encrypted connection with PC
• Compatible with all Mifare® tags• Multi-site• Fingerprint programmer• Includes: - LCD display - USB Scanner - DB9 cable - Software - AC power transformer
CABAPROX/W I Biometric & Mifare® Technology
• Fingerprint reader + Mifare® proximity reader• Fingerprint template stored in the
badge/card• Limited fingerprints by software
database• 26, 30 or 44-bit wiegand output• Current consumption: 450mA• Available stand-alone model:
CABAPROX
• Ergonomic design• NO and NC contact outputs with 2 separate
contacts, DPDT• Stainless steel plate• Heavy duty switch• Mounts on a single gang box (EXIT-BLP)• Input voltage : 250 Vac @ 5A, 30 Vdc @ 5A or 50 Vdc @ 2A• Certifications : UL, CSA & SEMKO.
eXIT-BLP I Request-to-exit Press Button
IP68
Environmental tests :Salt spray
-40°C (-40°F) to+85°C (185°F)
CE Certification
DEEE & RoHS
• Touch-sensitive illuminated button mounted on a stainless steel plate
• 1 relay output, NO/NC, 8A / 250V• Adjustable sensitivity• Adjustable relay timer• Power requirements: 12Vac/dc
BPeST I Touch-To-exit Button• Transforms any metallic surface into
a Request-To-Exit device or switch• 1 relay output, NO/NC, 8A / 250V• Adjustable sensitivity• Adjustable relay timer• Power requirements: 12Vac/dc
eST I Touch-Sensitive electronics
bi o M e t r i c s & reX
cdvigroup.com
M a n u f a c t u r i n g A c c e s s C o n t r o l s i n c e 1 9 8 5
CDVI GROuPFRANCE (HEADquARtER/SiègE SoCiAL)
Phone: +33 (0)1 48 91 01 02Fax: +33 (0)1 48 91 21 21
CDVI FRANCE31, avenue du général Leclerc
93500 PANtiNtél. : +33 (0)1 48 91 01 02Fax : +33 (0)1 48 91 21 21
CDVIFRANCE + EXPoRtPhone: +33 (0)1 48 91 01 02Fax: +33 (0)1 48 91 21 21
CDVI AMERiCAS[CANADA - uSA]
Phone: +1 (450) 682-7945Fax: +1 (450) 682-9590 CDVI BENELuX[BELgiuM - tHE NEtHERLANDS - LuXEM-BouRg]
Phone: +32 (0) 56 73 93 00Fax: +32 (0) 56 73 93 05
CDVISuiSSEPhone: +41 (0)21 882 18 41Fax: +41 (0)21 882 18 42
CDVI CHINACHiNA Phone: +86 (0)10 87664065Fax: +86 (0)10 87664165
CDVI iBÉRiCA[SPAiN - PoRtugAL]
Phone: +34 (0)935 39 09 66Fax: +34 (0)935 39 09 70
CDVIitALiAPhone: +39-0321-90573Fax: +39-0321-908018
CDVIMARoCPhone: +212 (0)5 22 48 09 40Fax: +212 (0)5 22 48 34 69
CDVI SWEDEN[SWEDEN - DENMARK - NoRWAY - FiNLAND]
Phone: +46 (0)31 760 19 30Fax: +46 (0)31 748 09 30
CDVI uK[uNitED KiNgDoM - iRELAND]
Phone: +44 (0)1628 531300 Fax: +44 (0)1628 531003
All the instructions on this document (photos, drawings and specifications) are subject to change without notice. CDVICATA-E05 - Printed in Canada - October 2011
top related