c38r sewer nozzle assembly under 34 l/m
Post on 11-Jul-2015
486 Views
Preview:
TRANSCRIPT
How to build your custom C38r Direct Hit assemblies
C38r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24
º 100 MM 150 MM 225 MM
PC
T/A
U2012/0
00326
Add on no 3 is the safety pipe
© Copyright Jim Paris 2013
DIRECT HIT®
M: 21 09 14
www.DirectHitSewerNozzles.com
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24
º 100 MM 150 MM 225 MM
PC
T/A
U2012/0
00326
Add on no 3 is the safety pipe
M: 21 09 14
The C38R works in any of the 100mm pipe combinations shown below except red.
DIRECT HIT®
cannot go down the red arrows.
cannot go down the red arrows.
in 100mm
lines C38R
24º
Extremeroot
penetrator
PCT/AU2012/000326
front 24º and back 30°
C38r Starter Kit
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24
º 100 MM 150 MM 225 MM
PC
T/A
U2012/0
00326
Add on no 3 is the safety pipe
M: 21 09 14
Cleandrain walls
Unblockgrease,
soapetc.
Removesandfrom
lines &grates
Hardendeposits,
lime,cement
etc.
Ice in
drains
Adjustassembly
to suit100, 150 & 225 lines
Clean manholes, shafts, pits
& hydro excavate
C38R in 100mm lines (cut with front turbo nozzle)
Cut tree rootsFAST
Penetrate tree rootsFAST
cut, clean & adjust with front turbo nozzle and flush from back jetsYES
YES YESYES YESYES YESYES YES NO
C38R in 100 mm lines (what can it go through, around, up or down)
YESYES YES YES YES YES
80 mmusing
03 Hose
90 mmusing
03 Hose100 mm using03 or 04 Hose
100 mmusing
03 or 04 Hose100 mm using03 or 04 Hose
100 mmusing
03 or 04 Hose
100 mmusing
03 or 04 Hose
50 mmMin Access
No 50 mm Bend
150 mmusing
03 or 04 Hose
NONONO
C38r Starter Kit
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24
º 100 MM 150 MM 225 MM
PC
T/A
U2012/0
00326
Add on no 3 is the safety pipe
M: 21 09 14
The C38R front turbo nozzle works in any of the 150mm pipe combinations shown below.
DIRECT HIT®
in 150mm
lines C38R
24º
Extremeroot
penetrator
PCT/AU2012/000326
front 24º and back 30°
C38r Starter Kit
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24
º 100 MM 150 MM 225 MM
PC
T/A
U2012/0
00326
Add on no 3 is the safety pipe
M: 21 09 14
Cleandrain walls
Unblockgrease,
soapetc.
Removesandfrom
lines &grates
Hardendeposits,
lime,cement
etc.
Ice in
drains
Adjustassembly
to suit100, 150 & 225 lines
Clean manholes, shafts, pits
& hydro excavate
C38R 24º in 150mm lines (cut with front reverse turbo nozzle)
cut, clean & adjust with front turbo nozzle and flush from back jetsYES
NOYES YESYES YESYES YESYES YES
Cut tree rootsFAST
Penetrate tree rootsFAST
C38R in 150 mm lines (what can it go through, around, up or down)
YESYES YES YESYES YES YES
80 mmusing
03 Hose
90 mmusing
03 Hose100 mm using03 or 04 Hose
100 mmusing
03 or 04 Hose150 mm using03 or 04 Hose
100 mmusing
03 or 04 Hose
100 mmusing
03 or 04 Hose
50 mmMin Access
No 50 mm Bend
150 mmusing
03 or 04 Hose
NONO
C38r Starter Kit
To make the C38r assembly take your C38r carriage
PC
T/A
U2012/0
00326
Front view Back view Side view
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24
º 100 MM 150 MM 225 MM
Add on no 3 is the safety pipeC38r Starter Kit
24º
From your Starter kit take the front nozzle
PC
T/A
U2012/0
00326
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
24º
PC
T/A
U2
01
2/0
00
32
6
Screw them together with spanners provided in the starter kit
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
24º
PC
T/A
U2
01
2/0
00
32
6
Connect hose
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
24º
PC
T/A
U2
01
2/0
00
32
6
Place assembly in the pipe
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
Side view
C38r Starter Kit
24º
PC
T/A
U2
01
2/0
00
32
6
Turn the water on
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
Side view
C38r Starter Kit
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipeC38r Starter Kit
How does the C38rs with its 24º front turbo nozzle work in 100-150mm with no rings
100mm
150mm
380mm
630mm
90mmC38rs traveling this way hits the blockage
cut
tree root blockage
© Copyright Jim Paris 2013
24º
PC
T/A
U2
01
2/0
00
32
6
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipeC38r Starter Kit
How does the C38rs with its 24º front turbo nozzle work in 100-150mm with no rings
100mm
150mm
380mm
630mm
90mmgo back and forward 90mm
tree root blockage
© Copyright Jim Paris 2013
cut
24º
PC
T/A
U2
01
2/0
00
32
6
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipeC38r Starter Kit
How does the C38rs with its 24º front turbo nozzle work in 100-150mm with no rings
100mm
150mm
380mm
630mm
90mmC38rs is through the blockage
tree root
© Copyright Jim Paris 2013
cut
24º
PC
T/A
U2
01
2/0
00
32
6
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipeC38r Starter Kit
You have just unblocked the drain and penetrated the roots. You used your CCTV and found roots.
Cut the roots by moving forward and backwards 90mm
380mm
C38rs cuts the roots at the top of the pipe
cut
© Copyright Jim Paris 2013
cut
90mm
tree root
24º
PC
T/A
U2
01
2/0
00
32
6
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipeC38r Starter Kit
Or you can have a diferent outcome so go to the next page
380mm
C38rs cuts the roots at the top of the pipe
© Copyright Jim Paris 2013
cut
24º
PC
T/A
U2
01
2/0
00
32
6
24º
PC
T/A
U2
01
2/0
00
32
6
Turn the water of
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipeC38r Starter Kit
24º
PC
T/A
U2
01
2/0
00
32
6
Remove assembly from pipe
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
24º
PC
T/A
U2
01
2/0
00
32
6front viewof 100mm
ring
Add the ring if you need to cut roots around a corner, cut roots higher and go over a dislodged pipe
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
24º
PC
T/A
U2
01
2/0
00
32
6
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
24º
PC
T/A
U2
01
2/0
00
32
6
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
24º
PC
T/A
U2
01
2/0
00
32
6
Place assembly in pipe
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
24º
PC
T/A
U2012/0
00326
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
150 MM 225 MM
Add on no 3 is the safety pipe
Side view
C38r Starter Kit
24º
PC
T/A
U2012/0
00326
Turn water on
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
150 MM 225 MM
Add on no 3 is the safety pipe
Side view
C38r Starter Kit
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
150 MM 225 MM
Add on no 3 is the safety pipeC38r Starter Kit
How does the C38r with its 24º front turbo nozzle work in 100mm with the 100mm ring on
100mm 248mm
C38r can cut bigger roots with the ring, due to been closer to them
cut
© Copyright Jim Paris 2013
380mm
cut 24º
PC
T/A
U2012/0
00326
24º
24º
PC
T/A
U2012/0
00326
Go over a dislodged pipe
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
150 MM 225 MM
Add on no 3 is the safety pipe
Side view
C38r Starter Kit
24º
PC
T/A
U2012/0
00326
Turn water of
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
150 MM 225 MM
Add on no 3 is the safety pipe
Side view
C38r Starter Kit
24º
PC
T/A
U2
01
2/0
00
32
6
Remove assembly from pipe
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
24º
PC
T/A
U2
01
2/0
00
32
6
Remove the ring
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
24º
PC
T/A
U2
01
2/0
00
32
6
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
24º
PC
T/A
U2
01
2/0
00
32
6
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
24º
PC
T/A
U2
01
2/0
00
32
6
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
Access through 50 mm PVC pipe
24º
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipeC38r Starter Kit
Access through 50 mm PVC pipe
24º
PCT/AU2012/000326
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipeC38r Starter Kit
Access through 50 mm PVC pipe
PCT/AU2012/000326
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipeC38r Starter Kit
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
Access through 50 mm PVC pipe
© Copyright Jim Paris 2013
C38r Starter Kit
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
Turn the water on and unblock the drain
© Copyright Jim Paris 2013
C38r Starter Kit
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
Turn the water off
© Copyright Jim Paris 2013
C38r Starter Kit
24º
PC
T/A
U2
01
2/0
00
32
6
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
Remove assembly from pipe
top view
C38r Starter Kit
24º
PC
T/A
U2
01
2/0
00
32
6
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
Remove the hose
top view
C38r Starter Kit
24º
PC
T/A
U2
01
2/0
00
32
6
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
In larger lines to prevent the assembly turning around use the appropriate safety pipe
top view
C38r Starter Kit
24º
PC
T/A
U2
01
2/0
00
32
6
Take of the front nozzle
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
PC
T/A
U2
01
2/0
00
32
6
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24
º 100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
PC
T/A
U2
01
2/0
00
32
6
Take the cap from your Cap kit if you need to go further in the line
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24
º 100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
PC
T/A
U2
01
2/0
00
32
6
Screw them together with spanners provided in the starter kit
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24
º 100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
PC
T/A
U2
01
2/0
00
32
6
Place assembly in the pipe
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24
º 100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
Side view
C38r Starter Kit
PC
T/A
U2
01
2/0
00
32
6
Turn the water on
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24
º 100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
Side view
C38r Starter Kit
PC
T/A
U2
01
2/0
00
32
6
1. Turn the water of
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24
º 100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
Side view
C38r Starter Kit
© Copyright Jim Paris 2013
DIRECT HIT®
M: 21 09 14
www.DirectHitSewerNozzles.com
top related