butterfly valves - bmicc · seat epdm ( nbr available ) handle aluminium alloy specification :...
Post on 10-Dec-2018
213 Views
Preview:
TRANSCRIPT
Butterfly valvesManual typeControl typeMonitoring type forBuildingandGeneral Industry
Export Department
Ph:403.255.8722 Fax:403.255.8798
Email:info@banffvalve.ca
Model No : Fig. BV11
Model No : Fig. BV12
Fig. BV12 Wafer type Butterfly ValveGear Box with Handwheel / PN16
Fig. BV11 Wafer type Butterfly ValveHandle with 10 position indicator / PN16
The manufacturer reserves the right to make changes without prior notification
BANFF VALVE INC. BV1CALGARY , ALBERTA , CANADA
SPECIFICATION :Parts MaterialsBody Ductile IronDisc Ductile Iron w / Epoxy ( 316 Stainless Steel available )Stem 416 Stainless Steel ( 316 Stainless Steel available )Seat EPDM ( NBR available )Handle Aluminium Alloy
SPECIFICATION :Parts MaterialsBody Ductile IronDisc Ductile Iron w / Epoxy ( 316 Stainless Steel available )Stem 416 Stainless Steel ( 316 Stainless Steel available )Seat EPDM ( NBR available )Gear Box Cast Iron
Working Temperature : Working Pressure and Test Pressure :
EPDM : -10 to 120 deg°CNBR : 0 to 82 deg°C
Seat Materials :( Non - Shock )
16 bar
Working Pressure Hydraulic Test PressureBody Seat
24 Bar 17.6 bar
Suit to Flange
PN16
DIMENSIONS ( mm ) :
mminchSIZE
DHBLFKWWeight ( Kg )
5092
20013043128681456.3
6510621914346128681456.6
8012224415546128681456.8
10015027417052128681458.7
125177310190561286814511
150204342210561286814512.5
200260410243602247628023.8
250314484282682247628029.6
300370549310782188131043
350422610345792188131055
40047367437710530112040089.5
450526743412112301120400
107.5
500577801440129317124300176
6006831021459154334129300238
2 2½ 3 4 5 6 8 10 12 14 16 18 20 24
DIMENSIONS ( mm ) :
mminchSIZE 2
50 65 80 100 125 150 200D 92 106 122 150 177 204 260H 260 280 304 340 375 407 440B 130 143 155 170 190 210 243L 43 46 46 52 56 56 60F 170 170 170 200 260 260 355Weight ( Kg ) 2.4 2.67 2.87 5 7.3 8.8 14.2
2½ 3 4 5 6 8
L
H
B
K
F
F
L
D
HB
W
D
Model No : Fig. BV21
Model No : Fig. BV22
Gear Box with Handwheel / PN16Fig. BV22 Lug type Butterfly Valve
Working Temperature : Working Pressure and Test Pressure :
EPDM : -10 to 120 deg°CNBR : 0 to 82 deg°C
Seat Materials : Suit to Flange Working Pressure
PN16 ( Non - Shock ) Body Seat16 bar 24 Bar 17.6 bar
Hydraulic Test Pressure
The manufacturer reserves the right to make changes without prior notification
BANFF VALVE INC. BV2CALGARY , ALBERTA , CANADA
Fig. BV21 Lug type Butterfly ValveHandle with 10 position indicator / PN16
SPECIFICATION :Parts MaterialsBody Ductile IronDisc Ductile Iron w / Epoxy ( 316 Stainless Steel available )Stem 416 Stainless Steel ( 316 Stainless Steel available )Seat EPDM ( NBR available )Handle Aluminium Alloy
SPECIFICATION :Parts MaterialsBody Ductile IronDisc Ductile Iron w / Epoxy ( 316 Stainless Steel available )Stem 416 Stainless Steel ( 316 Stainless Steel available )Seat EPDM ( NBR available )Gear Box Cast Iron
5012520013043128681457.1
6514521914346128681457.9
8016024415546128681458.9
100180274170521286814511.2
125210310190561286814515.2
150240342210561286814516.2
200295410243602247628027
250355484282682247628036
300410549310782188131048.3
350470610345792188131070
400525674377105301120400
124.5
450585743412112301120400
150.5
500650801440129317124300250
6007701021459154334129300318
DIMENSIONS ( mm ) :
mminchSIZE
PHBLFKWWeight ( Kg )
2 2½ 3 4 5 6 8 10 12 14 16 18 20 24
50 65 80 100 125 150 200125 145 160 180 210 240 295260 280 304 340 375 407 440130 143 155 170 190 210 24343 46 46 52 56 56 60170 170 170 200 260 260 3553.17 4 4.97 7.5 11.5 12.5 17.4
DIMENSIONS ( mm ) :
mminchSIZE 2
PHBLFWeight ( Kg )
2½ 3 4 5 6 8
P
L
H
W
L
P
BH
F
F
K
B
K
Model No : Fig. BV31
Model No : Fig. BV32
Gear Box with Handwheel / PN25Fig. BV32 Lug type Butterfly Valve
SPECIFICATION :Parts MaterialsBody Ductile Iron ( Cast Steel available ) Disc 304 Stainless Steel ( 316 Stainless Steel available ) Stem 416 Stainless Steel ( 316 Stainless Steel available )Seat EPDM ( NBR available )Handle Aluminium Alloy
SPECIFICATION :Parts MaterialsBody Ductile Iron ( Cast Steel available ) Disc 304 Stainless Steel ( 316 Stainless Steel available )Stem 416 Stainless Steel ( 316 Stainless Steel available )Seat EPDM ( NBR available )Gear Box Cast Iron
Working Temperature : Working Pressure and Test Pressure :
EPDM : -10 to 120 deg°CNBR : 0 to 82 deg°C
Seat Materials : Suit to Flange Working Pressure
PN25 ( Non - Shock ) Body Seat25 bar 37.5 Bar 27.5 bar
Hydraulic Test Pressure
The manufacturer reserves the right to make changes without prior notification
BANFF VALVE INC. BV3CALGARY , ALBERTA , CANADA
Fig. BV31 Lug type Butterfly ValveHandle with 10 position indicator / PN25
50125
155
1509.1
65145
155
1509.9
80160
155
15010.6
100190
155
15014.2
125220
155
15017.2
150250
155
15021
200310
222
30035
250370
222
30044
300430
213
30062
350490
213
30091
400550
251
300150
450600
251
300190
500660
254
300303
600770
130 143 155 170 190 210 243 282 310 368 400 422 480 562200 219 244 274 310 342 410 484 549 717 829 870 996 1151
179
300401
DIMENSIONS ( mm ) :
mminchSIZE
PHB
42 45 45 52 54 56 61 66 77 77 87 106 132 152L
75 75 75 75 75 75 86 86 86 86 125 125 125 145KF
WWeight ( Kg )
2 2½ 3 4 5 6 8 10 12 14 16 18 20 24
50 65 80 100 125 150125 145 160 190 220 250260 280 304 340 375 407130 143 155 170 190 21042 45 45 52 54 56170 170 170 200 260 2605.2 6 7 10.5 13.5 17.5
DIMENSIONS ( mm ) :
mminchSIZE 2
PHBLFWeight ( Kg )
2½ 3 4 5 62003104402436135525.2
8
(DN50-450) (DN500-600)
P
W
F
HB
LP
W
F
L
P
F
H B
Model No : Fig. BV42
Model No : Fig. BV52
Gear Box with Handwheel / PN16
Fig. BV52 Double Flange Eccentric type Butterfly Valve
SPECIFICATION :
Parts Materials
Body Ductile Iron
Disc Ductile Iron w / Epoxy ( 316 Stainless Steel available )
Stem 416 Stainless Steel ( 316 Stainless Steel available )
Seat EPDM ( NBR available )
Gear Box Cast Iron
DIMENSIONS ( mm ) :
mm
inchSIZE
700 800
28 32
P 910 1025
H 1140 1300
B 626 703
L 163 188
F 377 377
232 232K
W 400 400
Weight ( Kg ) 345 429
SPECIFICATION :
Parts Materials
Body Cast Steel
Disc 304 Stainless Steel ( 316 Stainless Steel available )
Stem 416 Stainless Steel ( 316 Stainless Steel available )
Seat S.S + Graphite
Gear Box Cast Iron
The manufacturer reserves the right to make changes without prior notification
BANFF VALVE INC. BV4CALGARY , ALBERTA , CANADA
Fig. BV42 Double Flange type Butterfly Valve
Gear box with Handwheel / PN16
Working Temperature : Working Pressure and Test Pressure :
EPDM : -10 to 120 deg°C
NBR : 0 to 82 deg°C
Seat Materials :
( Non - Shock )
16 bar
Working Pressure Hydraulic Test Pressure
Body Seat
24 Bar 17.6 bar
Suit to Flange
PN16
DIMENSIONS ( mm ) :
mm
inchSIZE 36 40 48
P
B
L
F
K
W
Weight ( Kg )
900
1274
649
510
460
220
400
1540
1000
1419
729
550
55
255
400
1990
1200
1644
849
630
55
255
400
2650
P
P
L
H
B
W
F
K
H
B
W
F
K
L
Model No :
Fig. BV13 ( On / Off )Fig. BV14 ( Modulating )
Model No :
Fig. BV15 ( Monitoring )
The manufacturer reserves the right to make changes without prior notification
BANFF VALVE INC. BV5CALGARY , ALBERTA , CANADA
Fig. BV13 & BV14 & BV15 Control Butterfly Valve ( Wafer type )
With Electrical Actuator : With Gear Box added limit switchand position indicator :
SPECIFICATION :Parts MaterialsBody Ductile IronDisc Ductile Iron w / Epoxy ( 316 Stainless Steel )Stem 416 Stainless Steel ( 316 Stainless Steel available )Seat EPDM ( NBR available )
Working Temperature : Working Pressure and Test Pressure :
EPDM : -10 to 120 deg°CNBR : 0 to 82 deg°C
PN16 ( Non - Shock ) BodyHydraulic Test Pressure
Seat16 bar 24 Bar 17.6 bar
Seat Materials : Suit to Flange Working Pressure
mm 50 65 80 100 125 150 200 250 300 350 400 450 500 600B 130 143 155 170 190 210 243 282 310 345 377 412 440 459C 70 76 89 104 120 132 167 202 239 265 297 331 361 562E 30 30 30 30 30 30 39 39 39 39 72 72 82 82L 43 46 46 52 56 56 60 68 78 79 105 112 129 154P 125 145 160 180 210 240 295 355 410 470 525 585 650 770Top plate data
50 50 50 70 70 70 102 102 125 125 140 140 165 254No. of holes 4 4 4 4 4 4 4 4 4 4 4 4 4 8
7 7 7 10 10 10 12 12 14 14 18 18 22 18
12.6 12.6 12.6 15.8 19 19 22.1 28.5 31.7 31.7 33.2 38 41.2 50.73 3 3 5 5 5 5 8 8 8 10 10 10 16
PCD
Hole dia.
dkey
Stem
DIMENSIONS ( mm ) :2inchSIZE 2½ 3 4 5 6 8 10 12 14 16 18 20 24
PCD
L
C
BP
d
E E
With Electrical Actuator : With Gear Box added limit switch
and position indicator :
The manufacturer reserves the right to make changes without prior notification
BANFF VALVE INC. BV6CALGARY , ALBERTA , CANADA
Fig. BV23 & BV24 & BV25 Control Butterfly Valve
( Lug type )
SPECIFICATION :
Parts Materials
Body Ductile Iron
Disc Ductile Iron w / Epoxy ( 316 Stainless Steel )
Stem 416 Stainless Steel ( 316 Stainless Steel available )
Seat EPDM ( NBR available )
Working Temperature : Working Pressure and Test Pressure :
EPDM : -10 to 120 deg°C
NBR : 0 to 82 deg°C
Suit to Flange Working Pressure Hydraulic Test Pressure
PN16( Non - Shock ) Body Seat
16 bar 24 Bar 17.6 bar
Seat Materials :
Model No :
Fig. BV23 ( On / Off )
Fig. BV24 ( Modulating )
Model No :
Fig. BV25 ( Monitoring )
Top plate data
50 50 50 70 70 70 102 102 125 125 140 140 165 254
No. of holes 4 4 4 4 4 4 4 4 4 4 4 4 4 8
7 7 7 10 10 10 12 12 14 14 18 18 22 18
12.6 12.6 12.6 15.8 19 19 22.1 28.5 31.7 31.7 33.2 38 41.2 50.7
3 3 3 5 5 5 5 8 8 8 10 10 10 16
PCD
Hole dia.
d
key
Stem
50 65 80 100 125 150 200 250 300 350 400 450 500 600
130 143 155 170 190 210 243 282 310 345 377 412 440 459
70 76 89 104 120 132 167 202 239 265 297 331 361 562
30 30 30 30 30 30 39 39 39 39 72 72 82 82
43 46 46 52 56 56 60 68 78 79 105 112 129 154
125 145 160 180 210 240 295 355 410 470 525 585 650 770
mm
B
C
E
L
P
DIMENSIONS ( mm ) :
2inchSIZE 2½ 3 4 5 6 8 10 12 14 16 18 20 24
d
E
B
C
P
L
PCD
E
The manufacturer reserves the right to make changes without prior notification
BANFF VALVE INC. BV7CALGARY , ALBERTA , CANADA
Electrical Actuator and Limit Switch
ELECTRICAL ACTUATOR PERFORMANCENominal Actuator Max output Operation time Max stem Motor 30 Min Power supply Actuator
Size Model Torgue 90 deg Dia Class F 220V / 50 Hz Weight
mm No Nm Sec mm W ( mA ) ( Kgs )
50 BE005 50 18 14 10 300 9
65 BE005 50 18 14 10 300 9
80 BE006 60 18 22 15 450 9
100 BE009 90 18 22 25 570 10
125 BE015 150 20 22 40 720 12
150 BE015 150 20 22 40 720 12
200 BE030 300 26 32 40 900 17
250 BE050 500 26 32 90 1200 19
300 BE060 600 26 32 90 1800 22
350 BE100 1000 26 32 200 2400 25
400 BE200 2000 90 50 180 2200 50
450 BE250 2500 90 50 200 2400 50
500 BE400 4000 60 70 370 1600 ( 380V ) 100
600 BE500 5000 60 70 550 2500 ( 380V ) 100
50 65 80 100 150 200 250 300
BL50 BL65 BL80 BL100 BL150 BL200 BL250 BL300
Housing : Aluminium die casting Mirco Switch : Mechanical Type c/w position indication signal
Norminal Size ( mm )
Limit Switch Model No
Material Construction Specification Data
O - ring : NBR Voltage : 250VAC / 125VAC / 250VDC / 125VDC / 30VDC
Cams : Polycarbonate Enclosure : IP67
Cover Screw : Stainless steel Visual Indicator : Open - Yellow , Closed - Red
Spring : Stainless steel Current : 3A / 5A / 0.2A / 0.4A / 4A
LIMIT SWITCH PERFORMANCE
The manufacturer reserves the right to make changes without prior notification
BANFF VALVE INC. BV8CALGARY , ALBERTA , CANADA
Butterfly Valves Installation Manual
Storage Instructions Installation
1. To protect disc edges during storage or installation/ 1. Consideration should be given to the location of the removal, ensure disc is in the closed position. valves in the piping system. The valve should not be2. The valve faces should be adequately protected placed too close to other valves, elbows, etc. as its against damage and coated with corrosion inhibitor performance may be affected. even when stored under cover. It is recommended that the valve have a minimum 3. Valves must be kept off the ground and high enough of six pipe diameters upstream and four pipe to avoid standing water. diameters downstream between it and other valves,4. Valves should be stored in a cool, dry and dark place. elbows, etc. in the piping system.
2. Ensure that the flanges are clean, undamaged and compatible with the valve.
Flange and Pipe Compatibility 3. Spread the flanges to allow sufficient clearance for the valve. DO NOT USE THE VALVE AS CROW BAR.
1. BANFF butterfly valves are suitable for installation between 4. Loosely fit two bolts at the bottom of the flanges to standard BS EN1092 / GB T9119 PN16 & PN25 flanges. bear the weight of the valve.2. Be sure that the companion flange faces to be mated 5. Close the valve so that the disc edge is within the with the rubber flanges of the valves. body (about 5 degree open).3. If flanges with a raised face are used, the outer diameter 6. Insert the valve between the flanges. of the raised face must be bigger than the inside diameter 7. Loosely fit the remainder of the flange bolts. of the recess on the valve body. 8. Centre the valve and ensure the flanges are properly4. Slip on flanges are recommended to ensure maximum aligned. valve performance. However, weld neck flanges may be 9. Hand tighten all the flange bolts. used. 10. Slowly open the valve and fully check for adequate5. Do not weld near the valve, as this will result in serious disc clearance. (The disc is in line with the parallel damage to the valve. flats or keyway in the stem.)
11. Cross tighten all the flange bolts.
General Safety Precautions
1. BANFF butterfly valves are bi-directional and will 1. Whenever a valve is being installed or removed from control flow in either direction of flow. the pipeline, ensure the line is not pressurised and 2. In most horizontal pipe installations, it is recommended any hazardous medium is drained away. that the valve should be fitted with its shaft horizontal and the lower half of disc moves with direction of flow during opening. Maintenance This is to ensure self-cleaning of the valve with media which tend to form sediment. 1. Bushings for the valves are all self-lubricated, no3. Never push the flanges apart with the valve because lubricant is needed. there is a risk of damaging the rubber liner. 2. A periodic check of lubrication for worm gear should4. Do not use flange gaskets or sealing compounds. be conducted annually. When the grease in the gear This can damage the rubber liner. box is dirty or black, dismount and clean the worm5. After fitting, check the free movement of the disc in the gear and box with gasoil or kerosene. Pour proper pipe. lithic-lubricant, turn the worm gear 2-3 full travels
to make the lubricant adhered on the gear surface even. At last, cover the box, tighten bolts, re-install the actuator on the valve.
top related