building homes the convenient readybuild way

Building homes the convenient Readybuild way

About the Tiscon Readybuild Client

One of Tata Tiscon Readybuild’s clients who has been in the construction business for the last six years, essentially playing the role

of builders in its premium residential buildings and commercial building projects approached us to help them solve some problems

that they were facing.

This client of ours has an annual steel consumption capacity of 4000MT and their current supplier for material is Tata Steel (CAB).

This company is guided by core values such as,

transparency in pricing, delivery and consumption.

Core Values

Transparency in pricing

ConsumptionDelivery

They aspire to be a part of all major upcoming residential projects and they also want to establish themselves as a

brand name in the silicon valley of India, Bengaluru.

About the Tiscon Readybuild Service

India, which is one of the most rapidly urbanising countries in the world, is a country where various new innovations in the

construction industry, have taken off. One such important innovation is Cut and Bend rebar services.

This is a downstream service which essentially helps in reducing costs and delivers cut and bent rebars according to your bar-bending

schedules, this way there is a complete elimination of waste disposal and a significant cutting down of labour costs.

This leads to projects being completed sooner. Also this is one of the best solutions for hassle-free construction. One sends their BBS (Bar

bending schedule) to the company. The company sends a cut and bent form of steel which is much easier to transport to the site of construction and also ensures that there is no wastage of scrap

materials as there is zero scrap generated.

Problems faced by the client

The client was facing problems on many fronts. The primary problem was posed by the fact that construction work during the day was

difficult as residents were opposed to the noise generated from the site in the middle of a busy day.

Moreover there was no space to install either a cutting or bending

machine or store inventory of straight rebars.

Had it not been for Cut and Bend, the customer would have had to rent a nearby site for setting up the machines. Essentially, cut and

bend rebar solutions helped the customer deal with multiple problems, and find solutions for them all at once.

Essentially, cut and bend rebar solutions helped the customer deal

with multiple problems, and find solutions for them all at once.

The Tiscon Readybuild Solution

Cut and Bend (CAB) was first recommended to the client by a consultant who had seen the benefits in terms of time reduction that the use of CAB brought about at some construction sites. It was also due to the space constraints that the customer was facing, that he felt that the benefit lay in buying fabricated rebars.

The customer approached us with their specific requirements and we ensured

delivery of customised lot sizes.

It removed the hassles of inventory-keeping and at the same time reduced

the working capital requirements.

Other benefits included improvement in the quality of construction and

reduction in pilferage.

Besides all these advantages, Tata Tiscon was also able to successfully add value to

the project with mass control over wastage.

CAB sections not only generated zero scrap but also minimised labour and other costs, leading to

cost reduction of Rs.1850-2050 per tonne.

The inventory requirement was reduced from a month to 10 days, which contributed to the total savings.

Finally, the duration of the project was reduced owing to timely delivery on the part of Tata Tiscon.

ConclusionTiscon Readybuild has partnered with some of the most

important projects in terms of infrastructure and has proven itself indispensable to construction in tricky places, like over-crowded urban areas, or nearly inaccessible hilly areas. This reputed brand has simplified construction with their unique

rebar solutions.

Customer Speak“In the last 18 months, we have been procuring and using Tata Tiscon Fe500D, in Cut and Bend (Readybuild) form steel for our various projects. We wish to place on record that it has helped us achieve substantial savings when compared to other branded rebars. We have been immensely benefitted with Tata Tiscon Cut and Bend rebars. It has given us a lot of confidence to use Readybuild steel for our other upcoming projects as well.We wish Tata Steel all the best on this new initiative.”

K GuruprasadDirector, HVP Reality Pvt Ltd.

For more details: Log on to http://readybuild.tatatiscon.co.in

More Details