basic electronics

Post on 17-Aug-2015

20 Views

Category:

Engineering

3 Downloads

Preview:

Click to see full reader

TRANSCRIPT

Concept of Electronics

SUBMITTED BY:

ASEEM ANAND

1

Basic components

Resistor

Capacitor

Diode

Transistor

7/22/2015http://aseemanand.wix.com/aseemanand

2

Resistors

Resistors are used to limit current or divide voltage and in some cases,

generate heat.

Used for driving circuit which requires low current and voltage than

available.

A two terminal non-polarized component.

7/22/2015http://aseemanand.wix.com/aseemanand

3

Unit of Resistors

Unit of resistance is ohm.

Notation for resistance

O- for ohm

K- for kilo ohm

M- for mega ohm

7/22/2015http://aseemanand.wix.com/aseemanand

4

Color Code Table

7/22/2015http://aseemanand.wix.com/aseemanand

5

Practical Use

Series connection

Parallel connection

7/22/2015http://aseemanand.wix.com/aseemanand

6

Capacitors

A two terminal electronic component which stores energy in form of

charge.

capacitance is a measure of a capacitor's ability to store charge.

A large capacitance means that more charge can be stored.

7/22/2015http://aseemanand.wix.com/aseemanand

7

Type of Capacitors

Polarized

which have specified positive and negative terminals.

Non-polarized

no defined polarity for terminals.

7/22/2015http://aseemanand.wix.com/aseemanand

8

Practical Uses

Used for making timer circuits, when used with resistance.

Used in clipper, clamper circuit.

Used for providing instantaneous large power as in flashlight of cameras.

Used in DC filter circuits.

7/22/2015http://aseemanand.wix.com/aseemanand

9

Diodes

A two-terminal electronic component that conducts electric current in

only one direction.

7/22/2015http://aseemanand.wix.com/aseemanand

10

Uses Of Diodes

Diodes are used for rectification.

Diodes are used in electrical meters for there protection.

Diodes are used in wave shaping circuits.

Diodes (LED) are used in display.

7/22/2015http://aseemanand.wix.com/aseemanand

11

Types Of Diodes

PN junction diode

Zener Diode

Light Emitting Diodes (LED)

Photo Diodes

7/22/2015http://aseemanand.wix.com/aseemanand

12

PN Junction Diode

This diode is made by p-type & n-type material.

This PN junction diode works in forward bias i.e. anode is connected to

positive terminal & cathode is connected to negative terminal.

7/22/2015http://aseemanand.wix.com/aseemanand

13

Zener Diode

Zener Diode works in reverse bias.

Symbol of zener diode:

7/22/2015http://aseemanand.wix.com/aseemanand

14

How can we recognize zener diode?

There is black band which is negative terminal & other one is positive

terminal.

7/22/2015http://aseemanand.wix.com/aseemanand

15

LED(Light Emitting Diode)

LED ( light Emitting Diode).

7/22/2015http://aseemanand.wix.com/aseemanand

16

Photodiode

A photodiode is a semiconductor device that converts light into current.

The current is generated when photons are absorbed in the photodiode.

7/22/2015http://aseemanand.wix.com/aseemanand

17

Working of Photodiode

Often known as Photo detector.

Photo Diode operates in reverse bias.

Light falls on the PN junction of the photo diode which creates electron-hole pair in the depletion layer which causes flow of current.

Current depends upon the light intensity

When light incident on the photodiode then current flows in the circuit.

7/22/2015http://aseemanand.wix.com/aseemanand

18

Practical Uses

Used for making Logic gates

Used for making rectifiers

Used as a switch

LED as indicators

Photodiodes as light detector

7/22/2015http://aseemanand.wix.com/aseemanand

19

Transistors

A transistor is a semiconductor device which is used to amplify and switch

electronic signals and electrical power.

Transistors has three terminal: Emitter , Base , Collector.

Transistors are of two type: NPN and PNP.

7/22/2015http://aseemanand.wix.com/aseemanand

20

Types of transistor

Junction transistor

Field effect transistor

7/22/2015http://aseemanand.wix.com/aseemanand

21

Junction Transistor

Transistor are of two types:

1-> n-p-n

A straight switch

2-> p-n-p

A inverted switch

7/22/2015http://aseemanand.wix.com/aseemanand

22

N-p-N as a Switch

When base of n-p-n is connected with logic high voltage then it short

circuit emitter and collector (SWITCH ON).

When base of n-p-n is connected with logic low voltage then it open

circuit both emitter and collector (SWITCH OFF).

7/22/2015http://aseemanand.wix.com/aseemanand

23

P-n-P as an Inverted Switch

When base of p-n-p is connected with logic high voltage then it open

circuit emitter and collector (SWITCH OFF).

When base of p-n-p is connected with logic low voltage then it short

circuit both emitter and collector (SWITCH ON).

7/22/2015http://aseemanand.wix.com/aseemanand

24

Practical uses

As a switch

As an amplifier

For realizing logic gates

7/22/2015http://aseemanand.wix.com/aseemanand

25

IC’S

L293D

555

LM358

IC 7805(voltage controlled)

7/22/2015http://aseemanand.wix.com/aseemanand

26

L293D IC

7/22/2015http://aseemanand.wix.com/aseemanand

27

Continued…

L293D is a dual H-Bridge motor driver.

So with one IC we can interface two DC motors which can be controlled

in both clockwise and counter clockwise direction

If you have motor with fix direction of motion then you can make use of all

the four I/Os to connect up to four DC motors.

L293D has output current of 600mA.

Moreover for protection of circuit from back EMF output diodes are

included within the IC.

7/22/2015http://aseemanand.wix.com/aseemanand

28

Interface motor with IC L293D

7/22/2015http://aseemanand.wix.com/aseemanand

29

555 IC

7/22/2015http://aseemanand.wix.com/aseemanand

30

Conti….

The 555 Timer IC is an integrated circuit (chip) used in a timer application,

pulse generation and oscillator applications.

It works only on falling edge of the incoming signal

7/22/2015http://aseemanand.wix.com/aseemanand

31

Operating modes:

It has three operating modes:

1) monostable

2) Bistable

3) Astable

7/22/2015http://aseemanand.wix.com/aseemanand

32

LM358

The LM358 IC consists of two independent operational amplifiers which

were designed specifically to operate from a single power supply over a

wide range of voltages.

It have two op-amp

Single power supply

7/22/2015http://aseemanand.wix.com/aseemanand

33

Features

It have two op-amp

Single power supply

Supply range 3v-32v

Eliminate need of dual supply

7/22/2015http://aseemanand.wix.com/aseemanand

34

IC 7805

It is a voltage regulator integrated circuit.

It designed to automatically maintain a constant voltage level

It works on a negative feedback

7/22/2015http://aseemanand.wix.com/aseemanand

35

Features

Output current range up to 1A

Output voltage 5V

Input voltage range up to 12V

Short circuit protection

7/22/2015http://aseemanand.wix.com/aseemanand

36

Thank You

Visit: http://aseemanand.wix.com/aseemanand

7/22/2015http://aseemanand.wix.com/aseemanand

37

top related