augmented reality and 3d modelling

Post on 23-Feb-2016

35 Views

Category:

Documents

0 Downloads

Preview:

Click to see full reader

DESCRIPTION

Augmented Reality and 3D modelling. Done by Stafford Joemat Supervised by Mr James Connan. Project Overview. Marker-based Augmented Reality uses a camera and a visual marker to determine the center of orientation and range of its coordinate system. - PowerPoint PPT Presentation

TRANSCRIPT

Augmented Reality and 3D modelling

Done by Stafford JoematSupervised by Mr James Connan

Project Overview Marker-based Augmented Reality uses a camera and a• visual marker to determine the center of orientation and range of its coordinate system The system is effectively a driver that allows users to• superimpose a 3D object on a predefined marker, across multiple frames using fixed input video source.

Project Overview•Object Orientated Analysis

Grayscale Speed Up Robust Features (SURF) OpenGL

•Object Orientated Design

•User Interface Specification

Greyscale•Fast image processing due to limited detail.

• Image intensity is stored in greyscale

•8 bits per sampled pixel, which allows 256 different intensities

•Red, green, and blue (RGB) are primary colours. Gamma expansion is used to get their linear intensity encoding to convert image into approximate level of grey

Greyscale

Speed Up Robust Features (SURF)•Computer vision algorithm used for object recognition•SURF is used to create an image pyramid• It filters the pyramids appropriately to detect points of interest. •By calculating the features it then compare with features of another image to find matches.

Speed Up Robust Features (SURF) Algorithm

Feature detection

Feature comparison

OpenGL

•Cross-platform API for writing applications that produce 2D and 3D computer graphics. •Is able to draw complex three-dimensional objects in real-time•Is capable of interfacing with other libraries.•Hide complexities of interfacing with different 3D accelerators

User Interface Specification

Object Orientated Design

Object Orientated Design in detail

Term 3•Tweak algorithm stability.•OpenGL virtual camera Calibration•Superimpose 3D object on marker.•Verify requirements.

Term 4•Testing and evaluating software•Create User and Technical Manual.

Project Plan

http://internet.suite101.com/article.cfm/using_printable_augmented_reality_marker_tags

References:

http://technotecture.com/augmentedreality

http://opencv.willowgarage.com/wiki/

http://www.cs.cmu.edu/~cil/vision.html

http://www.adobe.com/devnet/flash/articles/augmented_reality.htmlwww.hotcards.com

top related