argox linux printer driver function specification...figures displayed in the specification are based...

Argox Linux Printer Driver

Function Specification

Version: 0.02

Author: Stanley Wu

History

Version Chapter Modification Release Date

0.01 - First Release 2015/11/13

1. Overview 1. Add PPLA supported.

2016/10/18

1.1. System

Requirement 1. Add the supported Linux OS.

1.2. Supported

Printer

Properties /

Options

Modify the following items in [Table 1.2.A]:

1. Add PPLA supported.

2. Add Gap Height (dot) and Mark Thickness (dot)

for PPLB.

3. Add Horizontal Offset and Vertical Offset.

4. Add Media Calibration.

1.4. Supported

Printer Models 1. Add this section.

1.5. Limitation 1. Modify description of limitation.

2.1. Setting

1. Modify Range and Default and Description in

[Function Description].

2. Modify [Figure 2.1.A], [Figure 2.1.B] and

[Figure 2.1.C].

2.2. Range of

Setting Items for

Each Model

1. Add this section.

2.3. Media

Calibration 1. Add this section.

4.1. USB Port 1. Add this section.

4.2. Network

Port 1. Add this section.

Content 1. OVERVIEW ...............................................................................................................................................................7

1.1. SYSTEM REQUIREMENT .........................................................................................................................................7

1.2. SUPPORTED PRINTER PROPERTIES / OPTIONS ........................................................................................................7

1.3. SUPPORTED LANGUAGE ........................................................................................................................................8

1.4. SUPPORTED PRINTER MODELS ..............................................................................................................................9

1.5. LIMITATION ......................................................................................................................................................... 10

2. PRINTER OPTIONS................................................................................................................................................ 11

2.1. SETTING ITEMS................................................................................................................................................... 11

2.2. RANGE OF SETTING ITEMS FOR EACH MODEL ....................................................................................................... 15

2.2.1. Common Setting Items .............................................................................................................................. 15

2.2.1.1. Media Size ................................................................................................................................................................ 15

2.2.1.2. Label Top ................................................................................................................................................................. 16

2.2.1.3. Horizontal Offset ..................................................................................................................................................... 17

2.2.1.4. Vertical Offset .......................................................................................................................................................... 18

2.2.1.5. Tear-Off Adjust Position ......................................................................................................................................... 19

2.2.2. PPLA Group .............................................................................................................................................. 20

2.2.2.1. A-2140....................................................................................................................................................................... 20

2.2.2.2. A-2140L .................................................................................................................................................................... 21

2.2.2.3. A-2240....................................................................................................................................................................... 22

2.2.2.4. A-2240E .................................................................................................................................................................... 23

2.2.2.5. A-2240M.................................................................................................................................................................... 24

2.2.2.6. A-2240ME ................................................................................................................................................................. 25

2.2.2.7. A-3140....................................................................................................................................................................... 26

2.2.2.8. CP-2140 .................................................................................................................................................................... 27

2.2.2.9. CP-2140E.................................................................................................................................................................. 28

2.2.2.10. CP-2140L ................................................................................................................................................................ 29

2.2.2.11. CP-2140M ............................................................................................................................................................... 30

2.2.2.12. CP-2141L ................................................................................................................................................................ 31

2.2.2.13. CP-2240 .................................................................................................................................................................. 32

2.2.2.14. CP-2440 .................................................................................................................................................................. 33

2.2.2.15. CP-3140 .................................................................................................................................................................. 34

2.2.2.16. CP-3140E................................................................................................................................................................ 35

2.2.2.17. CP-3140L ................................................................................................................................................................ 36

2.2.2.18. CP-3140LE ............................................................................................................................................................. 37

2.2.2.19. CP-3240 .................................................................................................................................................................. 38

2.2.2.20. MP-2140.................................................................................................................................................................. 39

2.2.2.21. OS-214 plus ........................................................................................................................................................... 40

2.2.2.22. OS-214NU............................................................................................................................................................... 41

2.2.2.23. OS-2130D ............................................................................................................................................................... 42

2.2.2.24. OS-2130DE ............................................................................................................................................................. 43

2.2.2.25. OS-2140 .................................................................................................................................................................. 44

2.2.2.26. OS-2140E ............................................................................................................................................................... 45

2.2.2.27. OS-2440D ............................................................................................................................................................... 46

2.2.2.28. OS-3240D ............................................................................................................................................................... 47

2.2.2.29. OX-100 .................................................................................................................................................................... 48

2.2.2.30. OX-120D ................................................................................................................................................................. 49

2.2.2.31. X-1000VL ................................................................................................................................................................ 50

2.2.2.32. X-1300..................................................................................................................................................................... 51

2.2.2.33. X-2000v................................................................................................................................................................... 52

2.2.2.34. X-2300..................................................................................................................................................................... 53

2.2.2.35. X-2300E .................................................................................................................................................................. 54

2.2.2.36. X-2301..................................................................................................................................................................... 55

2.2.2.37. X-3200..................................................................................................................................................................... 56

2.2.2.38. X-3200E .................................................................................................................................................................. 57

2.2.3. PPLB Group .............................................................................................................................................. 58

2.2.3.1. A-2140....................................................................................................................................................................... 58

2.2.3.2. A-2140L .................................................................................................................................................................... 60

2.2.3.3. A-2240....................................................................................................................................................................... 62

2.2.3.4. A-2240E .................................................................................................................................................................... 64

2.2.3.5. A-2240M.................................................................................................................................................................... 66

2.2.3.6. A-2240ME ................................................................................................................................................................. 68

2.2.3.7. A-3140....................................................................................................................................................................... 70

2.2.3.8. CP-2140 .................................................................................................................................................................... 72

2.2.3.9. CP-2140E.................................................................................................................................................................. 74

2.2.3.10. CP-2140L ................................................................................................................................................................ 76

2.2.3.11. CP-2140M ............................................................................................................................................................... 78

2.2.3.12. CP-2141L ................................................................................................................................................................ 80

2.2.3.13. CP-2240 .................................................................................................................................................................. 82

2.2.3.14. CP-2440 .................................................................................................................................................................. 84

2.2.3.15. CP-3140 .................................................................................................................................................................. 86

2.2.3.16. CP-3140E................................................................................................................................................................ 88

2.2.3.17. CP-3140L ................................................................................................................................................................ 90

2.2.3.18. CP-3140LE ............................................................................................................................................................. 92

2.2.3.19. CP-3240 .................................................................................................................................................................. 94

2.2.3.20. MP-2140.................................................................................................................................................................. 96

2.2.3.21. OS-214 plus ........................................................................................................................................................... 98

2.2.3.22. OS-214NU............................................................................................................................................................. 100

2.2.3.23. OS-2130D ............................................................................................................................................................. 102

2.2.3.24. OS-2130DE ........................................................................................................................................................... 104

2.2.3.25. OS-2140 ................................................................................................................................................................ 106

2.2.3.26. OS-2140E ............................................................................................................................................................. 108

2.2.3.27. OS-2440D ............................................................................................................................................................. 110

2.2.3.28. OS-3240D ............................................................................................................................................................. 112

2.2.3.29. OX-100 .................................................................................................................................................................. 114

2.2.3.30. OX-120D ............................................................................................................................................................... 116

2.2.3.31. X-1000VL .............................................................................................................................................................. 118

2.2.3.32. X-1300................................................................................................................................................................... 120

2.2.3.33. X-2000v................................................................................................................................................................. 122

2.2.3.34. X-2300................................................................................................................................................................... 124

2.2.3.35. X-2300E ................................................................................................................................................................ 126

2.2.3.36. X-2301................................................................................................................................................................... 128

2.2.3.37. X-3200................................................................................................................................................................... 130

2.2.3.38. X-3200E ................................................................................................................................................................ 132

2.2.4. PPLZ Group ............................................................................................................................................ 134

2.2.4.1. A-2140..................................................................................................................................................................... 134

2.2.4.2. A-2140L .................................................................................................................................................................. 136

2.2.4.3. A-2240..................................................................................................................................................................... 138

2.2.4.4. A-2240E .................................................................................................................................................................. 140

2.2.4.5. A-3140..................................................................................................................................................................... 142

2.2.4.6. AME-3230 ............................................................................................................................................................... 144

2.2.4.7. AME-3230B............................................................................................................................................................. 146

2.2.4.8. AME-3230W ............................................................................................................................................................ 148

2.2.4.9. CP-2140 .................................................................................................................................................................. 150

2.2.4.10. CP-2140E.............................................................................................................................................................. 152

2.2.4.11. CP-2140M ............................................................................................................................................................. 154

2.2.4.12. CP-2240 ................................................................................................................................................................ 156

2.2.4.13. CP-2440 ................................................................................................................................................................ 158

2.2.4.14. CP-3140L .............................................................................................................................................................. 160

2.2.4.15. CP-3140LE ........................................................................................................................................................... 162

2.2.4.16. CP-3240 ................................................................................................................................................................ 164

2.2.4.17. MP-2140................................................................................................................................................................ 166

2.2.4.18. OS-214NU............................................................................................................................................................. 168

2.2.4.19. OS-2140 ................................................................................................................................................................ 170

2.2.4.20. OS-2140E ............................................................................................................................................................. 172

2.2.4.21. OS-2440D ............................................................................................................................................................. 174

2.2.4.22. OS-3240D ............................................................................................................................................................. 176

2.2.4.23. X-2000v................................................................................................................................................................. 178

2.2.4.24. X-2300................................................................................................................................................................... 180

2.2.4.25. X-2300E ................................................................................................................................................................ 182

2.2.4.26. X-3200................................................................................................................................................................... 184

2.2.4.27. X-3200E ................................................................................................................................................................ 186

2.3. MEDIA CALIBRATION .......................................................................................................................................... 188

3. INSTALL / UNINSTALL DRIVER .......................................................................................................................... 191

3.1. INSTALL DRIVER ................................................................................................................................................ 191

3.2. UNINSTALL DRIVER ........................................................................................................................................... 191

4. INSTALL PRINTER ............................................................................................................................................... 192

4.1. USB PORT....................................................................................................................................................... 192

4.2. NETWORK PORT ............................................................................................................................................... 197

1. Overview

Argox Linux printer driver is based on CUPS printing system for Linux. All the device

communications are handled by CUPS (backend). The raster filter converts the CUPS raster

graphic into PPLA, PPLB or PPLZ which the printer can understand. For example, if user prints a

label, the raster filter converts the graphic into PPLA, PPLB or PPLZ command which will be send

to the printer together with the printer options.

1.1. System Requirement

The minimum system requirements are listed as below:

IBM-compatible PC (CPU architecture: x86 or x64)

Supported Linux distributions:

Ubuntu 11.10 ~ 16.04

Fedora 16 ~ 24

openSUSE 11.4 ~ 42.1

Red Hat Enterprise Linux Server 7.2

中标麒麟 6 (NeoKylin 6)

中科红旗 6 (Red Flag Linux 6)

CUPS printing system for Linux (1.5 ~ 2.1.4)

At least one supported model of Argox label printer

1.2. Supported Printer Properties / Options

See [Table 1.2.A] for the supported printer properties.

Properties /

Options Description

Supported

General

Media Size Sets the media size. Units in inches. O O O

Resolution Sets the print density. O O O

Print Method Sets the print method, for example:

Direct Thermal or Thermal Transfer. O O O

Media Type /

Label Sensor

Selects the type of media being used in

the printer. For example: label with gap,

label with mark...

Gap Height

Sets the height of the gap. It is

necessary for PPLB command.

When continuous paper is selected, the

setting is ignored.

Thickness

Sets the thickness of the mark. It is

necessary for PPLB command.

When continuous paper is selected, the

setting is ignored.

Calibration

Send media calibration command to the

printer to execute media calibration. O O O

Printer Settings

Darkness Set the darkness of printing. O O O

Print Rate Determines the media and slew speed

(feeding a blank label) during printing. O O O

Label Top Moves the entire label format a

maximum of 120 dot rows up or down

from its current position, in relation to the

top edge of the label.

Horizontal

Offset

Based on the setting value to change the

X coordinate of the original point. O O O

Vertical Offset Based on the setting value to change the

Y coordinate of the original point. O O O

After Print Determines the action the printer takes

after a label or group of labels has

printed.

Tear-Off Adjust

Position

Adjust the rest position of the media after

a label is printed, which changes the

position at which the label is torn or cut.

Reprint After

Reprints a partially printed label caused

by a Ribbon Out, Media Out, or Head

Open error condition. The label is

reprinted as soon as the error condition

is corrected.

O: Supported -: Not Supported

[Table 1.2.A]

1.3. Supported Language

The supported languages are:

English

Traditional Chinese

Simplified Chinese

1.4. Supported Printer Models

See [Table 1.4.A] for the supported models and emulations.

Model \ Emulation PPLA PPLB PPLZ

A-2140 O O O

A-2140L O O O

A-2240 O O O

A-2240E O O O

A-2240M O O -

A-2240ME O O -

A-3140 O O O

AME-3230 - - O

AME-3230B - - O

AME-3230W - - O

CP-2140 O O O

CP-2140E O O O

CP-2140L O O -

CP-2140M O O O

CP-2141L O O -

CP-2240 O O O

CP-2440 O O O

CP-3140 O O -

CP-3140E O O -

CP-3140L O O O

CP-3140LE O O O

CP-3240 O O O

MP-2140 O O O

OS-214 plus O O -

OS-214NU O O O

OS-2130D O O -

OS-2130DE O O -

OS-2140 O O O

OS-2140E O O O

OS-2440D O O O

OS-3240D O O O

OX-100 O O -

OX-120D O O -

X-1000VL O O -

X-1300 O O -

X-2000v O O O

X-2300 O O O

X-2300E O O O

X-2301 O O -

X-3200 O O O

X-3200E O O O

O: Supported -: Not Supported

[Table 1.4.A]

1.5. Limitation

Figures displayed in the specification are based on Ubuntu 14.04 LTS. The Printer Properties

dialogs may be different with every Linux OS, they are controlled by the Linux OS.

To detect the media gap or mark correctly, it is necessary to execute media calibration before

the first print. Please refer to section "2.3. Media Calibration" for the setting method.

When print with the network model printer (for example, X-2300E, X-3200E...), it is

recommended to print via network port. Because some Linux OSs can't recognized the USB

printer correctly and the printer driver can't be installed. It is F/W's limitation, and we can't

modify it.

2. Printer Options

2.1. Setting Items

User can set the printer options in the Printer Properties dialog. See [Figure 2.A] for PPLA, [Figure

2.B] for PPLB, and [Figure 2.C] for PPLZ.

In different Linux OS, the Printer Properties dialog user interface may be different. They are

controlled by each Linux OS not by Linux printer driver.

The items controlled by Linux printer driver are the setting items, for example: Media Size,

Resolution... and the options in those settings items.

[Figure 2.A] For PPLA

[Figure 2.B] For PPLB

[Figure 2.C] For PPLZ

[Function Description]

Item Range and Default Description

General

Media Size See Media Size of each model in

section 2.2.

1. Select with combo-box.

Resolution See Resolution of each model in

section 2.2.

Print Method See Print Method of each model in

section 2.2.

Media Type /

Label Sensor

See Media Type or Label Sensor of

each model in section 2.2.

Gap Height (dot) See Gap Height (dot) of each model

in section 2.2.3.

2. It is necessary for PPLB command

Mark Thickness See Mark Thickness (dot) of each 1. Select with combo-box.

(dot) model in section 2.2.3. 2. It is necessary for PPLB command

Calibration

See Media Calibration of each model

in section 2.2.

2. To detect the media gap or mark

correctly, it is necessary to do

media calibration before the first

print. See section 2.3 for the setting

method.

3. When media calibration is set to

enable, printer driver will send

command to the printer to execute

media calibration and ignore the

print job data.

When media calibration is set to

disable, printer driver will send print

job to the printer to print and the

command will not be sent.

Printer Settings

Darkness See Darkness of each model in

section 2.2.

Print Rate See Print Rate of each model in

section 2.2.

Label Top See Label Top of each model in

section 2.2.

2. For PPLA, the unit is inch.

For PPLB and PPLZ, the

unit is dot.

Horizontal

Offset

See Horizontal Offset of each model

in section 2.2.

For PPLB and PPLZ, the unit is dot.

Vertical Offset See Vertical Offset of each model in

section 2.2.

After Print See After Print of each model in

section 2.2.

Tear-Off Adjust

Position

See Tear-Off Adjust Position of each

model in section 2.2.

Reprint After

See Reprint After Error of each model

in section 2.2.

2. The item is for PPLZ only.

2.2. Range of Setting Items for Each Model

2.2.1. Common Setting Items

The common setting items and ranges are listed below. They are referenced by some specify

models listed in section 2.2.2. PPLA Group, section 2.2.3. PPLB Group and section 2.2.4. PPLZ

Group.

2.2.1.1. Media Size

The supported media sizes are listed in below tables.

1.25x0.25" 1.50x0.25" 2.00x0.37" 2.25x0.50" 2.38x5.50" 2.50x1.00" 2.75x1.25" 3.00x1.00"

1.25x2.25" 1.50x0.50" 2.00x0.50" 2.25x1.25"

2.50x2.00"

3.00x1.25"

1.50x1.00" 2.00x1.00" 2.25x4.00"

3.00x2.00"

1.50x2.00" 2.00x1.25" 2.25x5.50"

3.00x3.00"

2.00x4.00"

3.00x5.00"

2.00x5.50"

3.25x2.00" 3.50x1.00" 4.00x1.00"

3.25x5.00"

4.00x2.00"

3.25x5.50"

4.00x2.50"

3.25x5.83"

4.00x3.00"

3.25x7.83"

4.00x4.00"

4.00x5.00"

4.00x6.00"

4.00x6.50"

4.00x13.00"

[Table 2.2.1.1.A] For 4 Inch Width Models

1.25x0.25" 1.50x0.25" 2.00x0.37" 2.25x0.50" 2.38x5.50" 2.50x1.00" 2.75x1.25" 3.00x1.00"

1.25x2.25" 1.50x0.50" 2.00x0.50" 2.25x1.25"

2.50x2.00"

3.00x1.25"

1.50x1.00" 2.00x1.00" 2.25x4.00"

3.00x2.00"

1.50x2.00" 2.00x1.25" 2.25x5.50"

3.00x3.00"

2.00x4.00"

3.00x5.00"

2.00x5.50"

[Table 2.2.1.1.B] For 3 Inch Width Models

2.2.1.2. Label Top

The supported label top settings are listed in below tables.

Index Value Index Value Index Value Index Value Index Value Index Value

0 UCPS 20 0.38 40 0.78 60 1.18 80 1.58 100 1.98

1 0.00 21 0.40 41 0.80 61 1.20 81 1.60 101 2.00

2 0.02 22 0.42 42 0.82 62 1.22 82 1.62

3 0.04 23 0.44 43 0.84 63 1.24 83 1.64

4 0.06 24 0.46 44 0.86 64 1.26 84 1.66

5 0.08 25 0.48 45 0.88 65 1.28 85 1.68

6 0.10 26 0.50 46 0.90 66 1.30 86 1.70

7 0.12 27 0.52 47 0.92 67 1.32 87 1.72

8 0.14 28 0.54 48 0.94 68 1.34 88 1.74

9 0.16 29 0.56 49 0.96 69 1.36 89 1.76

10 0.18 30 0.58 50 0.98 70 1.38 90 1.78

11 0.20 31 0.60 51 1.00 71 1.40 91 1.80

12 0.22 32 0.62 52 1.02 72 1.42 92 1.82

13 0.24 33 0.64 53 1.04 73 1.44 93 1.84

14 0.26 34 0.66 54 1.06 74 1.46 94 1.86

15 0.28 35 0.68 55 1.08 75 1.48 95 1.88

16 0.30 36 0.70 56 1.10 76 1.50 96 1.90

17 0.32 37 0.72 57 1.12 77 1.52 97 1.92

18 0.34 38 0.74 58 1.14 78 1.54 98 1.94

19 0.36 39 0.76 59 1.16 79 1.56 99 1.96

UCPS: Use Current Printer Setting

[Table 2.2.1.2.A] For PPLA

2.2.1.3. Horizontal Offset

The supported horizontal offset settings are listed in below tables.

0 UCPS 20 0.38 40 0.78 60 1.18 80 1.58 100 1.98

1 0.00 21 0.40 41 0.80 61 1.20 81 1.60 101 2.00

2 0.02 22 0.42 42 0.82 62 1.22 82 1.62

3 0.04 23 0.44 43 0.84 63 1.24 83 1.64

4 0.06 24 0.46 44 0.86 64 1.26 84 1.66

5 0.08 25 0.48 45 0.88 65 1.28 85 1.68

6 0.10 26 0.50 46 0.90 66 1.30 86 1.70

7 0.12 27 0.52 47 0.92 67 1.32 87 1.72

8 0.14 28 0.54 48 0.94 68 1.34 88 1.74

9 0.16 29 0.56 49 0.96 69 1.36 89 1.76

10 0.18 30 0.58 50 0.98 70 1.38 90 1.78

11 0.20 31 0.60 51 1.00 71 1.40 91 1.80

12 0.22 32 0.62 52 1.02 72 1.42 92 1.82

13 0.24 33 0.64 53 1.04 73 1.44 93 1.84

14 0.26 34 0.66 54 1.06 74 1.46 94 1.86

15 0.28 35 0.68 55 1.08 75 1.48 95 1.88

16 0.30 36 0.70 56 1.10 76 1.50 96 1.90

17 0.32 37 0.72 57 1.12 77 1.52 97 1.92

18 0.34 38 0.74 58 1.14 78 1.54 98 1.94

19 0.36 39 0.76 59 1.16 79 1.56 99 1.96

2.2.1.4. Vertical Offset

The supported vertical offset settings are listed in below tables.

0 UCPS 20 0.38 40 0.78 60 1.18 80 1.58 100 1.98

1 0.00 21 0.40 41 0.80 61 1.20 81 1.60 101 2.00

2 0.02 22 0.42 42 0.82 62 1.22 82 1.62

3 0.04 23 0.44 43 0.84 63 1.24 83 1.64

4 0.06 24 0.46 44 0.86 64 1.26 84 1.66

5 0.08 25 0.48 45 0.88 65 1.28 85 1.68

6 0.10 26 0.50 46 0.90 66 1.30 86 1.70

7 0.12 27 0.52 47 0.92 67 1.32 87 1.72

8 0.14 28 0.54 48 0.94 68 1.34 88 1.74

9 0.16 29 0.56 49 0.96 69 1.36 89 1.76

10 0.18 30 0.58 50 0.98 70 1.38 90 1.78

11 0.20 31 0.60 51 1.00 71 1.40 91 1.80

12 0.22 32 0.62 52 1.02 72 1.42 92 1.82

13 0.24 33 0.64 53 1.04 73 1.44 93 1.84

14 0.26 34 0.66 54 1.06 74 1.46 94 1.86

15 0.28 35 0.68 55 1.08 75 1.48 95 1.88

16 0.30 36 0.70 56 1.10 76 1.50 96 1.90

17 0.32 37 0.72 57 1.12 77 1.52 97 1.92

18 0.34 38 0.74 58 1.14 78 1.54 98 1.94

19 0.36 39 0.76 59 1.16 79 1.56 99 1.96

2.2.1.5. Tear-Off Adjust Position

The supported tear-off adjust position settings are listed in below tables.

0 UCPS 20 0.38 40 0.78 60 1.18 80 1.58 100 1.98

1 0.00 21 0.40 41 0.80 61 1.20 81 1.60 101 2.00

2 0.02 22 0.42 42 0.82 62 1.22 82 1.62

3 0.04 23 0.44 43 0.84 63 1.24 83 1.64

4 0.06 24 0.46 44 0.86 64 1.26 84 1.66

5 0.08 25 0.48 45 0.88 65 1.28 85 1.68

6 0.10 26 0.50 46 0.90 66 1.30 86 1.70

7 0.12 27 0.52 47 0.92 67 1.32 87 1.72

8 0.14 28 0.54 48 0.94 68 1.34 88 1.74

9 0.16 29 0.56 49 0.96 69 1.36 89 1.76

10 0.18 30 0.58 50 0.98 70 1.38 90 1.78

11 0.20 31 0.60 51 1.00 71 1.40 91 1.80

12 0.22 32 0.62 52 1.02 72 1.42 92 1.82

13 0.24 33 0.64 53 1.04 73 1.44 93 1.84

14 0.26 34 0.66 54 1.06 74 1.46 94 1.86

15 0.28 35 0.68 55 1.08 75 1.48 95 1.88

16 0.30 36 0.70 56 1.10 76 1.50 96 1.90

17 0.32 37 0.72 57 1.12 77 1.52 97 1.92

18 0.34 38 0.74 58 1.14 78 1.54 98 1.94

19 0.36 39 0.76 59 1.16 79 1.56 99 1.96

2.2.2. PPLA Group

2.2.2.1. A-2140

Max. Print Width (inch): 4

Max. Print Length (inch): 100

Setting Item Range Default

General

Media Size See [Table 2.2.1.1.A] 4.00x3.00"

Resolution 203 dpi 203 dpi

Label Sensor Use Current Printer Setting,

Disable,

Label Gap,

Label Mark,

Label Notch (Edge)

Use Current Printer Setting

Print Method Use Current Printer Setting,

Direct Thermal,

Thermal Transfer

Media Calibration Disable, Enable Disable

Printer Settings

Darkness Use Current Printer Setting,

0, 1, 2, 3, 4..., 18, 19, 20

Print Rate Use Current Printer Setting,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.

Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting

Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting

Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting

After Print Use Current Printer Setting,

Tear Off

Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting

2.2.2.2. A-2140L

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge)

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.

Tear Off

2.2.2.3. A-2240

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge),

Label Notch (Center)

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.

Tear Off,

Peel Off

2.2.2.4. A-2240E

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge),

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.

Tear Off,

Peel Off

2.2.2.5. A-2240M

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge),

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.

Tear Off,

Peel Off

2.2.2.6. A-2240ME

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge),

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.

Tear Off,

Peel Off

2.2.2.7. A-3140

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge),

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

Tear Off,

Peel Off

2.2.2.8. CP-2140

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge),

Multi-Column Labels

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

Tear Off,

2.2.2.9. CP-2140E

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge),

Multi-Column Labels

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

Tear Off,

2.2.2.10. CP-2140L

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge),

Multi-Column Labels

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

Tear Off,

Peel Off

2.2.2.11. CP-2140M

General

Disable,

Label Mark,

Multi-Column Labels

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

Tear Off,

2.2.2.12. CP-2141L

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge),

Multi-Column Labels

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.,

6 inches/sec.

Tear Off,

2.2.2.13. CP-2240

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge),

Multi-Column Labels

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.,

6 inches/sec.,

7 inches/sec.

Tear Off,

Peel Off

2.2.2.14. CP-2440

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge),

Multi-Column Labels

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.,

6 inches/sec.

Tear Off,

Peel Off

2.2.2.15. CP-3140

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge),

Multi-Column Labels

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

Tear Off,

2.2.2.16. CP-3140E

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge),

Multi-Column Labels

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

Tear Off,

2.2.2.17. CP-3140L

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge),

Multi-Column Labels

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

Tear Off,

2.2.2.18. CP-3140LE

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge),

Multi-Column Labels

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

Tear Off,

2.2.2.19. CP-3240

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge),

Multi-Column Labels

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

Tear Off,

Peel Off

2.2.2.20. MP-2140

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge),

Multi-Column Labels

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

Tear Off,

Peel Off

2.2.2.21. OS-214 plus

General

Disable,

Label Gap,

Label Mark

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

1 inches/sec.,

2 inches/sec.,

3 inches/sec.

Tear Off,

2.2.2.22. OS-214NU

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge)

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

Tear Off,

2.2.2.23. OS-2130D

General

Media Size See [Table 2.2.1.1.B] 3.00x2.00"

Disable,

Label Gap,

Label Mark,

Label Notch (Edge)

Direct Thermal

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

Tear Off,

Peel Off

2.2.2.24. OS-2130DE

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge)

Direct Thermal

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

Tear Off,

Peel Off

2.2.2.25. OS-2140

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge)

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

Tear Off,

2.2.2.26. OS-2140E

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge)

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

Tear Off,

2.2.2.27. OS-2440D

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge)

Direct Thermal

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.,

6 inches/sec.

Tear Off,

Peel Off

2.2.2.28. OS-3240D

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge)

Direct Thermal

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

Tear Off,

Peel Off

2.2.2.29. OX-100

General

Disable,

Label Gap,

Label Mark

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.

Tear Off,

2.2.2.30. OX-120D

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge)

Direct Thermal

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.

Tear Off,

2.2.2.31. X-1000VL

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge)

Direct Thermal

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

Tear Off,

Peel Off

2.2.2.32. X-1300

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge)

Direct Thermal

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

Tear Off,

Peel Off

2.2.2.33. X-2000v

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge)

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.,

6 inches/sec.

Tear Off,

Peel Off

2.2.2.34. X-2300

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge)

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.,

6 inches/sec.

Tear Off,

Peel Off

2.2.2.35. X-2300E

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge)

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.,

6 inches/sec.

Tear Off,

Peel Off

2.2.2.36. X-2301

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge)

Direct Thermal

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.,

6 inches/sec.

Tear Off,

Peel Off

2.2.2.37. X-3200

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge)

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

1 inches/sec.

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.

Tear Off,

Peel Off

2.2.2.38. X-3200E

General

Disable,

Label Gap,

Label Mark,

Label Notch (Edge)

Direct Thermal,

Thermal Transfer

Printer Settings

0, 1, 2, 3, 4..., 18, 19, 20

1 inches/sec.

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.

Tear Off,

Peel Off

2.2.3. PPLB Group

2.2.3.1. A-2140

General

Print Method Direct Thermal,

Thermal Transfer

Direct Thermal

Media Type Use Current Printer Setting,

Label with Gaps,

Label with Notches (Edge),

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.

Label Top (dot) Use Current Printer Setting,

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

Horizontal Offset (dot) -120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Vertical Offset (dot) -120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off

Tear-Off Adjust Position (dot) Use Current Printer Setting,,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.2. A-2140L

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Vertical Offset (dot) -120, -115, -110, -105, -100, 0

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.3. A-2240

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Notches (Center),

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.4. A-2240E

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.5. A-2240M

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.6. A-2240ME

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.7. A-3140

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.8. CP-2140

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Multi-Column Labels,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.9. CP-2140E

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.10. CP-2140L

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off,

Tear-Off Adjust Position (dot) Use Current Printer Setting,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.11. CP-2140M

General

Thermal Transfer

Direct Thermal

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.12. CP-2141L

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.,

6 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.13. CP-2240

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.,

6 inches/sec.,

7 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.14. CP-2440

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.,

6 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.15. CP-3140

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.16. CP-3140E

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.17. CP-3140L

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.18. CP-3140LE

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.19. CP-3240

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off,

Partial Cut

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.20. MP-2140

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.21. OS-214 plus

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

1 inches/sec.,

2 inches/sec.,

3 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.22. OS-214NU

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.23. OS-2130D

General

Print Method Direct Thermal Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.24. OS-2130DE

General

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.25. OS-2140

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.26. OS-2140E

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.27. OS-2440D

General

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.,

6 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.28. OS-3240D

General

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.29. OX-100

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.30. OX-120D

General

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.31. X-1000VL

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.32. X-1300

General

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.33. X-2000v

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.,

6 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.34. X-2300

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.,

6 inches/sec..

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.35. X-2300E

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.,

6 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.36. X-2301

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.,

6 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.37. X-3200

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.3.38. X-3200E

General

Thermal Transfer

Direct Thermal

Label with Gaps,

Label with Mark,

Continuous

Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

80, 88, 96, 104, 112, 120,

128, 136, 144, 152, 160

Printer Settings

0, 1, 2, 3, 4..., 13, 14, 15

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.

-72, -64, -56, -48, -40, -32,

-24, -16, -8, +0, +8, +16, +24,

+32, +40, +48, +56, +64, +72

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off,

-127, -125, -120, -115, -110,

-105, -100, -95, -90, -85, -80,

-75, -70, -65, -60, -55, -50,

-45, -40, -35, -30, -25, -20,

-15, -10, -5, 0, 5, 10, 15, 20,

25, 30, 35, 40, 45, 50, 55, 60,

65, 70, 75, 80, 85, 90, 95,

100, 105, 110, 115, 120, 125,

2.2.4. PPLZ Group

2.2.4.1. A-2140

General

Direct Thermal,

Thermal Transfer

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Non Continuous (Mark

Sensing),

Non Continuous (Edge Notch

Sensing)

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Horizontal Offset (dot) Use Current Printer Setting,

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Vertical Offset (dot) Use Current Printer Setting,

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Reprint After Error Use Current Printer Setting,

Always,

2.2.4.2. A-2140L

General

Direct Thermal,

Thermal Transfer

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Sensing)

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.3. A-2240

General

Direct Thermal,

Thermal Transfer

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Non Continuous (Center

Notch Sensing)

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.4. A-2240E

General

Direct Thermal,

Thermal Transfer

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Notch Sensing)

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.5. A-3140

General

Direct Thermal,

Thermal Transfer

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Notch Sensing)

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

1 inches/sec.

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.6. AME-3230

General

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Sensing)

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

1 inches/sec.

2 inches/sec.,

3 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.7. AME-3230B

General

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Sensing)

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

1 inches/sec.

2 inches/sec.,

3 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.8. AME-3230W

General

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Sensing)

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

1 inches/sec.

2 inches/sec.,

3 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.9. CP-2140

General

Direct Thermal,

Thermal Transfer

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Multi-Column Labels

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.10. CP-2140E

General

Direct Thermal,

Thermal Transfer

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Multi-Column Labels

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.11. CP-2140M

General

Direct Thermal,

Thermal Transfer

Direct Thermal

Continuous,

Sensing),

Multi-Column Labels

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.12. CP-2240

General

Direct Thermal,

Thermal Transfer

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Multi-Column Labels

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.,

6 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.13. CP-2440

General

Direct Thermal,

Thermal Transfer

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Multi-Column Labels

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.,

6 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.14. CP-3140L

General

Direct Thermal,

Thermal Transfer

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Multi-Column Labels

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.15. CP-3140LE

General

Direct Thermal,

Thermal Transfer

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Multi-Column Labels

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.16. CP-3240

General

Direct Thermal,

Thermal Transfer

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Multi-Column Labels

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off,

Partial Cut

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.17. MP-2140

General

Direct Thermal,

Thermal Transfer

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Multi-Column Labels

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.18. OS-214NU

General

Direct Thermal,

Thermal Transfer

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Sensing)

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.19. OS-2140

General

Direct Thermal,

Thermal Transfer

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Sensing)

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.20. OS-2140E

General

Direct Thermal,

Thermal Transfer

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Sensing)

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.21. OS-2440D

General

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Sensing)

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.,

6 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.22. OS-3240D

General

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Sensing)

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

2 inches/sec.,

3 inches/sec.,

4 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.23. X-2000v

General

Direct Thermal,

Thermal Transfer

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Sensing)

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.,

6 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.24. X-2300

General

Direct Thermal,

Thermal Transfer

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Sensing)

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.,

6 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.25. X-2300E

General

Direct Thermal,

Thermal Transfer

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Sensing)

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.,

6 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.26. X-3200

General

Direct Thermal,

Thermal Transfer

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Sensing)

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.2.4.27. X-3200E

General

Direct Thermal,

Thermal Transfer

Direct Thermal

Continuous,

Non Continuous (Web

Sensing),

Sensing)

Printer Settings

1, 2, 3, 4..., 13, 14, 15..., 28,

29, 30

1 inches/sec.,

2 inches/sec.,

3 inches/sec.,

4 inches/sec.,

5 inches/sec.

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

-120, -115, -110, -105, -100,

-95, -90, -85, -80, -75, -70,

-65, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30, 35,

40, 45, 50, 55, 60, 65, 70, 75,

80, 85, 90, 95, 100, 105, 110,

115, 120

Tear Off,

Peel Off

-64, -60, -55, -50, -45, -40,

-35, -30, -25, -20, -15, -10,

-5, 0, 5, 10, 15, 20, 25, 30,

35, 40, 45, 50, 55, 60, 64

Always,

2.3. Media Calibration

To detect the media gap or mark correctly when print job with Linux printer driver, it is necessary to

do media calibration before the first print.

The media calibration method is described as below:

A. DO NOT print the test page immediately after the printer driver is installed.

B. Set Media Calibration to Enable in Printer Properties dialog as [Figure 2.3.A].

a. Select "Printer Options" menu.

b. Set "Media Calibration" to Enable.

c. Click "Apply" button.

[Figure 2.3.A]

C. Click "Print Test Page" button to do media calibration in Printer Properties dialog as [Figure

2.3.B].

a. Select "Settings" menu.

b. Click "Print Test Page" button to send a job to the printer to execute media calibration. After

"Print Test Page" button is clicked, the "Submitted" dialog is displayed. See [Figure 2.3.C].

Click "OK" button on the "Submitted" dialog to close it.

At this condition, printer driver will send command to the printer to execute media calibration

and the test page data will be ignored by printer driver and will not be sent to the printer.

[Figure 2.3.B]

[Figure 2.3.C]

D. Set Media Calibration to Disable.

a. Select "Printer Options" menu.

b. Set "Media Calibration" to Disable.

c. Click "Apply" button.

[Figure 2.3.D]

E. Click "Print Test Page" button to print test page. See [Figure 2.3.E].

After the Media Calibration is set to Disable, printer driver will process the printing data and send

the printing data to the printer to print out.

Now the label can be printed correctly.

[Figure 2.3.E]

3. Install / Uninstall Driver

3.1. Install Driver

To install driver, please extract the driver package to the temporarily folder, for example:

LinuxDriver.

Then switch into the LinuxDriver folder and input the following command line in terminal window.

$ sudo bash ./install

3.2. Uninstall Driver

To uninstall driver, please switch into the temporarily folder you created when you install the driver

and input the following command line in terminal window.

$ sudo bash ./uninstall

If the temporarily folder does not exist, you can extract the driver package to the temporarily folder,

for example: LinuxDriver.

Then switch into the LinuxDriver folder and input the following command line in terminal window.

$ sudo bash ./uninstall

4. Install Printer

4.1. USB Port

The procedures for installing printer in Ububtu 14.04 LTS via USB port are as following. To install

printer in Fedora Linux, please check the Fedora Linux web site.

A. Connect the printer with USB cable or other supported cable to PC and make sure the printer is

powered on and in Ready status.

B. Click the System Settings button on the tool bar to open the System Settings dialog.

See [Figure 4.1.A].

[Figure 4.1.A]

C. Click "Printers" button in System Settings dialog to open Printers dialog. See [Figure 4.1.B].

[Figure 4.1.B]

D. In Printers dialog, click "Add" button to open New Printer dialog. See [Figure 4.1.C].

[Figure 4.1.C]

E. In New Printer dialog, select the printer name of the connected printer under "Devices" list then

click "Forward" button. See [Figure 4.1.D].

[Figure 4.1.D]

F. In Choose Driver dialog, select "Select printer from database" then select "ARGOX" in the Makes

list and click "Forward" button. See [Figure 4.1.E].

[Figure 4.1.E]

G. Select model name of the printer in "Models" list and select the driver name in "Drivers" list then

click "Forward" button. See [Figure 4.1.F].

[Figure 4.1.F]

H. In Describe Printer dialog, we can input the printer name, description and location of the printer.

Click "Apply" button to go the next step. See [Figure 4.1.G].

[Figure 4.1.G]

I. After a while, the print test page confirmation dialog will be displayed. See [Figure 4.1.H].

We click "Cancel" button to cancel the print test page process; we also can click "Print Test Page"

button to print a test page.

[Figure 4.1.H]

J. In Printer Properties dialog, we can change the settings of the printer driver, we also can view the

printer status and print a test page. See [Figure 4.1.I].

Click "OK" button in Printer Properties dialog to finish the install printer procedure.

[Figure 4.1.I]

4.2. Network Port

The procedures for installing printer in Ububtu 14.04 LTS via network port are as following. To

install printer in Fedora Linux, please check the Fedora Linux web site.

A. Connect the printer with network cable to PC and make sure the printer is powered on and in

Ready status.

B. Click the System Settings button on the tool bar to open the System Settings dialog.

See [Figure 4.2.A].

[Figure 4.2.A]

C. Click "Printers" button in System Settings dialog to open Printers dialog. See [Figure 4.2.B].

[Figure 4.2.B]

D. In Printers dialog, click "Add" button to open New Printer dialog. See [Figure 4.2.C].

[Figure 4.2.C]

E. In New Printer dialog, select "LPD/LPR Host or Printer" in "Select Device" field. Input host IP

address and queue name in "Location of the LPD network printer" field and click "Forward"

button. See [Figure 4.2.D]. The queue name can be specified by user.

[Figure 4.2.D]

F. In Choose Driver dialog, select "Select printer from database" then select "ARGOX" in the Makes

list and click "Forward" button. See [Figure 4.2.E].

[Figure 4.2.E]

G. Select model name of the printer in "Models" list and select the driver name in "Drivers" list then

click "Forward" button. See [Figure 4.2.F].

[Figure 4.2.F]

H. In Describe Printer dialog, we can input the printer name, description and location of the printer.

Click "Apply" button to go the next step. See [Figure 4.2.G].

[Figure 4.2.G]

I. After a while, the print test page confirmation dialog will be displayed. See [Figure 4.2.H].

We click "Cancel" button to cancel the print test page process; we also can click "Print Test Page"

button to print a test page.

[Figure 4.2.H]

J. In Printer Properties dialog, we can change the settings of the printer driver, we also can view the

printer status and print a test page. See [Figure 4.2.I].

Click "OK" button in Printer Properties dialog to finish the install printer procedure.

[Figure 4.2.I]

argox linux printer driver function specification...figures displayed in the specification are based...

Documents

dot impact printer - star command specification

d4 series printer user’s manual€¦ · argox d4 printer...

barcode scanner argox as-8520

www.argox.com all rights reserved. copyright © 2008 argox...

ix4 series printer user manual - bilkur · thank you for...

a-2240, a-2240e desktop barcode printer - bilkur ·...

argox os series 214plus users manual

argox manual2

p4 printer user manual - argox · thank you for purchasing...

argox, automation simplified - argox barcode label printer...

argox - ppla

indir.bilkur.com adresinden (bartender driver argox

ethernet printer user's guide english - argox...ethernet...

argox manual

ethernet printer user's guide english - argox

innovative commercial printer with industrial durability...

argox technology co - bilkur

argox 2140 manual_spanish.pdf

may in ma vach argox

leitores argox