argox linux printer driver function specification...figures displayed in the specification are based...
TRANSCRIPT
Argox Linux Printer Driver
Function Specification
Version: 0.02
Author: Stanley Wu
History
Version Chapter Modification Release Date
0.01 - First Release 2015/11/13
0.02
1. Overview 1. Add PPLA supported.
2016/10/18
1.1. System
Requirement 1. Add the supported Linux OS.
1.2. Supported
Printer
Properties /
Options
Modify the following items in [Table 1.2.A]:
1. Add PPLA supported.
2. Add Gap Height (dot) and Mark Thickness (dot)
for PPLB.
3. Add Horizontal Offset and Vertical Offset.
4. Add Media Calibration.
1.4. Supported
Printer Models 1. Add this section.
1.5. Limitation 1. Modify description of limitation.
2.1. Setting
Items
1. Modify Range and Default and Description in
[Function Description].
2. Modify [Figure 2.1.A], [Figure 2.1.B] and
[Figure 2.1.C].
2.2. Range of
Setting Items for
Each Model
1. Add this section.
2.3. Media
Calibration 1. Add this section.
4.1. USB Port 1. Add this section.
4.2. Network
Port 1. Add this section.
Content 1. OVERVIEW ...............................................................................................................................................................7
1.1. SYSTEM REQUIREMENT .........................................................................................................................................7
1.2. SUPPORTED PRINTER PROPERTIES / OPTIONS ........................................................................................................7
1.3. SUPPORTED LANGUAGE ........................................................................................................................................8
1.4. SUPPORTED PRINTER MODELS ..............................................................................................................................9
1.5. LIMITATION ......................................................................................................................................................... 10
2. PRINTER OPTIONS................................................................................................................................................ 11
2.1. SETTING ITEMS................................................................................................................................................... 11
2.2. RANGE OF SETTING ITEMS FOR EACH MODEL ....................................................................................................... 15
2.2.1. Common Setting Items .............................................................................................................................. 15
2.2.1.1. Media Size ................................................................................................................................................................ 15
2.2.1.2. Label Top ................................................................................................................................................................. 16
2.2.1.3. Horizontal Offset ..................................................................................................................................................... 17
2.2.1.4. Vertical Offset .......................................................................................................................................................... 18
2.2.1.5. Tear-Off Adjust Position ......................................................................................................................................... 19
2.2.2. PPLA Group .............................................................................................................................................. 20
2.2.2.1. A-2140....................................................................................................................................................................... 20
2.2.2.2. A-2140L .................................................................................................................................................................... 21
2.2.2.3. A-2240....................................................................................................................................................................... 22
2.2.2.4. A-2240E .................................................................................................................................................................... 23
2.2.2.5. A-2240M.................................................................................................................................................................... 24
2.2.2.6. A-2240ME ................................................................................................................................................................. 25
2.2.2.7. A-3140....................................................................................................................................................................... 26
2.2.2.8. CP-2140 .................................................................................................................................................................... 27
2.2.2.9. CP-2140E.................................................................................................................................................................. 28
2.2.2.10. CP-2140L ................................................................................................................................................................ 29
2.2.2.11. CP-2140M ............................................................................................................................................................... 30
2.2.2.12. CP-2141L ................................................................................................................................................................ 31
2.2.2.13. CP-2240 .................................................................................................................................................................. 32
2.2.2.14. CP-2440 .................................................................................................................................................................. 33
2.2.2.15. CP-3140 .................................................................................................................................................................. 34
2.2.2.16. CP-3140E................................................................................................................................................................ 35
2.2.2.17. CP-3140L ................................................................................................................................................................ 36
2.2.2.18. CP-3140LE ............................................................................................................................................................. 37
2.2.2.19. CP-3240 .................................................................................................................................................................. 38
2.2.2.20. MP-2140.................................................................................................................................................................. 39
2.2.2.21. OS-214 plus ........................................................................................................................................................... 40
2.2.2.22. OS-214NU............................................................................................................................................................... 41
2.2.2.23. OS-2130D ............................................................................................................................................................... 42
2.2.2.24. OS-2130DE ............................................................................................................................................................. 43
2.2.2.25. OS-2140 .................................................................................................................................................................. 44
2.2.2.26. OS-2140E ............................................................................................................................................................... 45
2.2.2.27. OS-2440D ............................................................................................................................................................... 46
2.2.2.28. OS-3240D ............................................................................................................................................................... 47
2.2.2.29. OX-100 .................................................................................................................................................................... 48
2.2.2.30. OX-120D ................................................................................................................................................................. 49
2.2.2.31. X-1000VL ................................................................................................................................................................ 50
2.2.2.32. X-1300..................................................................................................................................................................... 51
2.2.2.33. X-2000v................................................................................................................................................................... 52
2.2.2.34. X-2300..................................................................................................................................................................... 53
2.2.2.35. X-2300E .................................................................................................................................................................. 54
2.2.2.36. X-2301..................................................................................................................................................................... 55
2.2.2.37. X-3200..................................................................................................................................................................... 56
2.2.2.38. X-3200E .................................................................................................................................................................. 57
2.2.3. PPLB Group .............................................................................................................................................. 58
2.2.3.1. A-2140....................................................................................................................................................................... 58
2.2.3.2. A-2140L .................................................................................................................................................................... 60
2.2.3.3. A-2240....................................................................................................................................................................... 62
2.2.3.4. A-2240E .................................................................................................................................................................... 64
2.2.3.5. A-2240M.................................................................................................................................................................... 66
2.2.3.6. A-2240ME ................................................................................................................................................................. 68
2.2.3.7. A-3140....................................................................................................................................................................... 70
2.2.3.8. CP-2140 .................................................................................................................................................................... 72
2.2.3.9. CP-2140E.................................................................................................................................................................. 74
2.2.3.10. CP-2140L ................................................................................................................................................................ 76
2.2.3.11. CP-2140M ............................................................................................................................................................... 78
2.2.3.12. CP-2141L ................................................................................................................................................................ 80
2.2.3.13. CP-2240 .................................................................................................................................................................. 82
2.2.3.14. CP-2440 .................................................................................................................................................................. 84
2.2.3.15. CP-3140 .................................................................................................................................................................. 86
2.2.3.16. CP-3140E................................................................................................................................................................ 88
2.2.3.17. CP-3140L ................................................................................................................................................................ 90
2.2.3.18. CP-3140LE ............................................................................................................................................................. 92
2.2.3.19. CP-3240 .................................................................................................................................................................. 94
2.2.3.20. MP-2140.................................................................................................................................................................. 96
2.2.3.21. OS-214 plus ........................................................................................................................................................... 98
2.2.3.22. OS-214NU............................................................................................................................................................. 100
2.2.3.23. OS-2130D ............................................................................................................................................................. 102
2.2.3.24. OS-2130DE ........................................................................................................................................................... 104
2.2.3.25. OS-2140 ................................................................................................................................................................ 106
2.2.3.26. OS-2140E ............................................................................................................................................................. 108
2.2.3.27. OS-2440D ............................................................................................................................................................. 110
2.2.3.28. OS-3240D ............................................................................................................................................................. 112
2.2.3.29. OX-100 .................................................................................................................................................................. 114
2.2.3.30. OX-120D ............................................................................................................................................................... 116
2.2.3.31. X-1000VL .............................................................................................................................................................. 118
2.2.3.32. X-1300................................................................................................................................................................... 120
2.2.3.33. X-2000v................................................................................................................................................................. 122
2.2.3.34. X-2300................................................................................................................................................................... 124
2.2.3.35. X-2300E ................................................................................................................................................................ 126
2.2.3.36. X-2301................................................................................................................................................................... 128
2.2.3.37. X-3200................................................................................................................................................................... 130
2.2.3.38. X-3200E ................................................................................................................................................................ 132
2.2.4. PPLZ Group ............................................................................................................................................ 134
2.2.4.1. A-2140..................................................................................................................................................................... 134
2.2.4.2. A-2140L .................................................................................................................................................................. 136
2.2.4.3. A-2240..................................................................................................................................................................... 138
2.2.4.4. A-2240E .................................................................................................................................................................. 140
2.2.4.5. A-3140..................................................................................................................................................................... 142
2.2.4.6. AME-3230 ............................................................................................................................................................... 144
2.2.4.7. AME-3230B............................................................................................................................................................. 146
2.2.4.8. AME-3230W ............................................................................................................................................................ 148
2.2.4.9. CP-2140 .................................................................................................................................................................. 150
2.2.4.10. CP-2140E.............................................................................................................................................................. 152
2.2.4.11. CP-2140M ............................................................................................................................................................. 154
2.2.4.12. CP-2240 ................................................................................................................................................................ 156
2.2.4.13. CP-2440 ................................................................................................................................................................ 158
2.2.4.14. CP-3140L .............................................................................................................................................................. 160
2.2.4.15. CP-3140LE ........................................................................................................................................................... 162
2.2.4.16. CP-3240 ................................................................................................................................................................ 164
2.2.4.17. MP-2140................................................................................................................................................................ 166
2.2.4.18. OS-214NU............................................................................................................................................................. 168
2.2.4.19. OS-2140 ................................................................................................................................................................ 170
2.2.4.20. OS-2140E ............................................................................................................................................................. 172
2.2.4.21. OS-2440D ............................................................................................................................................................. 174
2.2.4.22. OS-3240D ............................................................................................................................................................. 176
2.2.4.23. X-2000v................................................................................................................................................................. 178
2.2.4.24. X-2300................................................................................................................................................................... 180
2.2.4.25. X-2300E ................................................................................................................................................................ 182
2.2.4.26. X-3200................................................................................................................................................................... 184
2.2.4.27. X-3200E ................................................................................................................................................................ 186
2.3. MEDIA CALIBRATION .......................................................................................................................................... 188
3. INSTALL / UNINSTALL DRIVER .......................................................................................................................... 191
3.1. INSTALL DRIVER ................................................................................................................................................ 191
3.2. UNINSTALL DRIVER ........................................................................................................................................... 191
4. INSTALL PRINTER ............................................................................................................................................... 192
4.1. USB PORT....................................................................................................................................................... 192
4.2. NETWORK PORT ............................................................................................................................................... 197
1. Overview
Argox Linux printer driver is based on CUPS printing system for Linux. All the device
communications are handled by CUPS (backend). The raster filter converts the CUPS raster
graphic into PPLA, PPLB or PPLZ which the printer can understand. For example, if user prints a
label, the raster filter converts the graphic into PPLA, PPLB or PPLZ command which will be send
to the printer together with the printer options.
1.1. System Requirement
The minimum system requirements are listed as below:
IBM-compatible PC (CPU architecture: x86 or x64)
Supported Linux distributions:
Ubuntu 11.10 ~ 16.04
Fedora 16 ~ 24
openSUSE 11.4 ~ 42.1
Red Hat Enterprise Linux Server 7.2
中标麒麟 6 (NeoKylin 6)
中科红旗 6 (Red Flag Linux 6)
CUPS printing system for Linux (1.5 ~ 2.1.4)
At least one supported model of Argox label printer
1.2. Supported Printer Properties / Options
See [Table 1.2.A] for the supported printer properties.
Properties /
Options Description
PPLA
Supported
PPLB
Supported
PPLZ
Supported
General
Media Size Sets the media size. Units in inches. O O O
Resolution Sets the print density. O O O
Print Method Sets the print method, for example:
Direct Thermal or Thermal Transfer. O O O
Media Type /
Label Sensor
Selects the type of media being used in
the printer. For example: label with gap,
label with mark...
O O O
Gap Height
(dot)
Sets the height of the gap. It is
necessary for PPLB command.
When continuous paper is selected, the
setting is ignored.
- O -
Mark
Thickness
(dot)
Sets the thickness of the mark. It is
necessary for PPLB command.
When continuous paper is selected, the
- O -
setting is ignored.
Media
Calibration
Send media calibration command to the
printer to execute media calibration. O O O
Printer Settings
Darkness Set the darkness of printing. O O O
Print Rate Determines the media and slew speed
(feeding a blank label) during printing. O O O
Label Top Moves the entire label format a
maximum of 120 dot rows up or down
from its current position, in relation to the
top edge of the label.
O O O
Horizontal
Offset
Based on the setting value to change the
X coordinate of the original point. O O O
Vertical Offset Based on the setting value to change the
Y coordinate of the original point. O O O
After Print Determines the action the printer takes
after a label or group of labels has
printed.
O O O
Tear-Off Adjust
Position
Adjust the rest position of the media after
a label is printed, which changes the
position at which the label is torn or cut.
O O O
Reprint After
Error
Reprints a partially printed label caused
by a Ribbon Out, Media Out, or Head
Open error condition. The label is
reprinted as soon as the error condition
is corrected.
- - O
O: Supported -: Not Supported
[Table 1.2.A]
1.3. Supported Language
The supported languages are:
English
Traditional Chinese
Simplified Chinese
1.4. Supported Printer Models
See [Table 1.4.A] for the supported models and emulations.
Model \ Emulation PPLA PPLB PPLZ
A-2140 O O O
A-2140L O O O
A-2240 O O O
A-2240E O O O
A-2240M O O -
A-2240ME O O -
A-3140 O O O
AME-3230 - - O
AME-3230B - - O
AME-3230W - - O
CP-2140 O O O
CP-2140E O O O
CP-2140L O O -
CP-2140M O O O
CP-2141L O O -
CP-2240 O O O
CP-2440 O O O
CP-3140 O O -
CP-3140E O O -
CP-3140L O O O
CP-3140LE O O O
CP-3240 O O O
MP-2140 O O O
OS-214 plus O O -
OS-214NU O O O
OS-2130D O O -
OS-2130DE O O -
OS-2140 O O O
OS-2140E O O O
OS-2440D O O O
OS-3240D O O O
OX-100 O O -
OX-120D O O -
X-1000VL O O -
X-1300 O O -
X-2000v O O O
X-2300 O O O
X-2300E O O O
X-2301 O O -
X-3200 O O O
X-3200E O O O
O: Supported -: Not Supported
[Table 1.4.A]
1.5. Limitation
Figures displayed in the specification are based on Ubuntu 14.04 LTS. The Printer Properties
dialogs may be different with every Linux OS, they are controlled by the Linux OS.
To detect the media gap or mark correctly, it is necessary to execute media calibration before
the first print. Please refer to section "2.3. Media Calibration" for the setting method.
When print with the network model printer (for example, X-2300E, X-3200E...), it is
recommended to print via network port. Because some Linux OSs can't recognized the USB
printer correctly and the printer driver can't be installed. It is F/W's limitation, and we can't
modify it.
2. Printer Options
2.1. Setting Items
User can set the printer options in the Printer Properties dialog. See [Figure 2.A] for PPLA, [Figure
2.B] for PPLB, and [Figure 2.C] for PPLZ.
In different Linux OS, the Printer Properties dialog user interface may be different. They are
controlled by each Linux OS not by Linux printer driver.
The items controlled by Linux printer driver are the setting items, for example: Media Size,
Resolution... and the options in those settings items.
[Figure 2.A] For PPLA
[Figure 2.B] For PPLB
[Figure 2.C] For PPLZ
[Function Description]
Item Range and Default Description
General
Media Size See Media Size of each model in
section 2.2.
1. Select with combo-box.
Resolution See Resolution of each model in
section 2.2.
1. Select with combo-box.
Print Method See Print Method of each model in
section 2.2.
1. Select with combo-box.
Media Type /
Label Sensor
See Media Type or Label Sensor of
each model in section 2.2.
1. Select with combo-box.
Gap Height (dot) See Gap Height (dot) of each model
in section 2.2.3.
1. Select with combo-box.
2. It is necessary for PPLB command
only.
Mark Thickness See Mark Thickness (dot) of each 1. Select with combo-box.
(dot) model in section 2.2.3. 2. It is necessary for PPLB command
only.
Media
Calibration
See Media Calibration of each model
in section 2.2.
1. Select with combo-box.
2. To detect the media gap or mark
correctly, it is necessary to do
media calibration before the first
print. See section 2.3 for the setting
method.
3. When media calibration is set to
enable, printer driver will send
command to the printer to execute
media calibration and ignore the
print job data.
When media calibration is set to
disable, printer driver will send print
job to the printer to print and the
command will not be sent.
Printer Settings
Darkness See Darkness of each model in
section 2.2.
1. Select with combo-box.
Print Rate See Print Rate of each model in
section 2.2.
1. Select with combo-box.
Label Top See Label Top of each model in
section 2.2.
1. Select with combo-box.
2. For PPLA, the unit is inch.
For PPLB and PPLZ, the
unit is dot.
Horizontal
Offset
See Horizontal Offset of each model
in section 2.2.
1. Select with combo-box.
2. For PPLA, the unit is inch.
For PPLB and PPLZ, the unit is dot.
Vertical Offset See Vertical Offset of each model in
section 2.2.
1. Select with combo-box.
2. For PPLA, the unit is inch.
For PPLB and PPLZ, the unit is dot.
After Print See After Print of each model in
section 2.2.
1. Select with combo-box.
Tear-Off Adjust
Position
See Tear-Off Adjust Position of each
model in section 2.2.
1. Select with combo-box.
2. For PPLA, the unit is inch.
For PPLB and PPLZ, the unit is dot.
Reprint After
Error
See Reprint After Error of each model
in section 2.2.
1. Select with combo-box.
2. The item is for PPLZ only.
2.2. Range of Setting Items for Each Model
2.2.1. Common Setting Items
The common setting items and ranges are listed below. They are referenced by some specify
models listed in section 2.2.2. PPLA Group, section 2.2.3. PPLB Group and section 2.2.4. PPLZ
Group.
2.2.1.1. Media Size
The supported media sizes are listed in below tables.
1.25x0.25" 1.50x0.25" 2.00x0.37" 2.25x0.50" 2.38x5.50" 2.50x1.00" 2.75x1.25" 3.00x1.00"
1.25x2.25" 1.50x0.50" 2.00x0.50" 2.25x1.25"
2.50x2.00"
3.00x1.25"
1.50x1.00" 2.00x1.00" 2.25x4.00"
3.00x2.00"
1.50x2.00" 2.00x1.25" 2.25x5.50"
3.00x3.00"
2.00x4.00"
3.00x5.00"
2.00x5.50"
3.25x2.00" 3.50x1.00" 4.00x1.00"
3.25x5.00"
4.00x2.00"
3.25x5.50"
4.00x2.50"
3.25x5.83"
4.00x3.00"
3.25x7.83"
4.00x4.00"
4.00x5.00"
4.00x6.00"
4.00x6.50"
4.00x13.00"
[Table 2.2.1.1.A] For 4 Inch Width Models
1.25x0.25" 1.50x0.25" 2.00x0.37" 2.25x0.50" 2.38x5.50" 2.50x1.00" 2.75x1.25" 3.00x1.00"
1.25x2.25" 1.50x0.50" 2.00x0.50" 2.25x1.25"
2.50x2.00"
3.00x1.25"
1.50x1.00" 2.00x1.00" 2.25x4.00"
3.00x2.00"
1.50x2.00" 2.00x1.25" 2.25x5.50"
3.00x3.00"
2.00x4.00"
3.00x5.00"
2.00x5.50"
[Table 2.2.1.1.B] For 3 Inch Width Models
2.2.1.2. Label Top
The supported label top settings are listed in below tables.
Index Value Index Value Index Value Index Value Index Value Index Value
0 UCPS 20 0.38 40 0.78 60 1.18 80 1.58 100 1.98
1 0.00 21 0.40 41 0.80 61 1.20 81 1.60 101 2.00
2 0.02 22 0.42 42 0.82 62 1.22 82 1.62
3 0.04 23 0.44 43 0.84 63 1.24 83 1.64
4 0.06 24 0.46 44 0.86 64 1.26 84 1.66
5 0.08 25 0.48 45 0.88 65 1.28 85 1.68
6 0.10 26 0.50 46 0.90 66 1.30 86 1.70
7 0.12 27 0.52 47 0.92 67 1.32 87 1.72
8 0.14 28 0.54 48 0.94 68 1.34 88 1.74
9 0.16 29 0.56 49 0.96 69 1.36 89 1.76
10 0.18 30 0.58 50 0.98 70 1.38 90 1.78
11 0.20 31 0.60 51 1.00 71 1.40 91 1.80
12 0.22 32 0.62 52 1.02 72 1.42 92 1.82
13 0.24 33 0.64 53 1.04 73 1.44 93 1.84
14 0.26 34 0.66 54 1.06 74 1.46 94 1.86
15 0.28 35 0.68 55 1.08 75 1.48 95 1.88
16 0.30 36 0.70 56 1.10 76 1.50 96 1.90
17 0.32 37 0.72 57 1.12 77 1.52 97 1.92
18 0.34 38 0.74 58 1.14 78 1.54 98 1.94
19 0.36 39 0.76 59 1.16 79 1.56 99 1.96
UCPS: Use Current Printer Setting
[Table 2.2.1.2.A] For PPLA
2.2.1.3. Horizontal Offset
The supported horizontal offset settings are listed in below tables.
Index Value Index Value Index Value Index Value Index Value Index Value
0 UCPS 20 0.38 40 0.78 60 1.18 80 1.58 100 1.98
1 0.00 21 0.40 41 0.80 61 1.20 81 1.60 101 2.00
2 0.02 22 0.42 42 0.82 62 1.22 82 1.62
3 0.04 23 0.44 43 0.84 63 1.24 83 1.64
4 0.06 24 0.46 44 0.86 64 1.26 84 1.66
5 0.08 25 0.48 45 0.88 65 1.28 85 1.68
6 0.10 26 0.50 46 0.90 66 1.30 86 1.70
7 0.12 27 0.52 47 0.92 67 1.32 87 1.72
8 0.14 28 0.54 48 0.94 68 1.34 88 1.74
9 0.16 29 0.56 49 0.96 69 1.36 89 1.76
10 0.18 30 0.58 50 0.98 70 1.38 90 1.78
11 0.20 31 0.60 51 1.00 71 1.40 91 1.80
12 0.22 32 0.62 52 1.02 72 1.42 92 1.82
13 0.24 33 0.64 53 1.04 73 1.44 93 1.84
14 0.26 34 0.66 54 1.06 74 1.46 94 1.86
15 0.28 35 0.68 55 1.08 75 1.48 95 1.88
16 0.30 36 0.70 56 1.10 76 1.50 96 1.90
17 0.32 37 0.72 57 1.12 77 1.52 97 1.92
18 0.34 38 0.74 58 1.14 78 1.54 98 1.94
19 0.36 39 0.76 59 1.16 79 1.56 99 1.96
UCPS: Use Current Printer Setting
[Table 2.2.1.3.A] For PPLA
2.2.1.4. Vertical Offset
The supported vertical offset settings are listed in below tables.
Index Value Index Value Index Value Index Value Index Value Index Value
0 UCPS 20 0.38 40 0.78 60 1.18 80 1.58 100 1.98
1 0.00 21 0.40 41 0.80 61 1.20 81 1.60 101 2.00
2 0.02 22 0.42 42 0.82 62 1.22 82 1.62
3 0.04 23 0.44 43 0.84 63 1.24 83 1.64
4 0.06 24 0.46 44 0.86 64 1.26 84 1.66
5 0.08 25 0.48 45 0.88 65 1.28 85 1.68
6 0.10 26 0.50 46 0.90 66 1.30 86 1.70
7 0.12 27 0.52 47 0.92 67 1.32 87 1.72
8 0.14 28 0.54 48 0.94 68 1.34 88 1.74
9 0.16 29 0.56 49 0.96 69 1.36 89 1.76
10 0.18 30 0.58 50 0.98 70 1.38 90 1.78
11 0.20 31 0.60 51 1.00 71 1.40 91 1.80
12 0.22 32 0.62 52 1.02 72 1.42 92 1.82
13 0.24 33 0.64 53 1.04 73 1.44 93 1.84
14 0.26 34 0.66 54 1.06 74 1.46 94 1.86
15 0.28 35 0.68 55 1.08 75 1.48 95 1.88
16 0.30 36 0.70 56 1.10 76 1.50 96 1.90
17 0.32 37 0.72 57 1.12 77 1.52 97 1.92
18 0.34 38 0.74 58 1.14 78 1.54 98 1.94
19 0.36 39 0.76 59 1.16 79 1.56 99 1.96
UCPS: Use Current Printer Setting
[Table 2.2.1.2.A] For PPLA
2.2.1.5. Tear-Off Adjust Position
The supported tear-off adjust position settings are listed in below tables.
Index Value Index Value Index Value Index Value Index Value Index Value
0 UCPS 20 0.38 40 0.78 60 1.18 80 1.58 100 1.98
1 0.00 21 0.40 41 0.80 61 1.20 81 1.60 101 2.00
2 0.02 22 0.42 42 0.82 62 1.22 82 1.62
3 0.04 23 0.44 43 0.84 63 1.24 83 1.64
4 0.06 24 0.46 44 0.86 64 1.26 84 1.66
5 0.08 25 0.48 45 0.88 65 1.28 85 1.68
6 0.10 26 0.50 46 0.90 66 1.30 86 1.70
7 0.12 27 0.52 47 0.92 67 1.32 87 1.72
8 0.14 28 0.54 48 0.94 68 1.34 88 1.74
9 0.16 29 0.56 49 0.96 69 1.36 89 1.76
10 0.18 30 0.58 50 0.98 70 1.38 90 1.78
11 0.20 31 0.60 51 1.00 71 1.40 91 1.80
12 0.22 32 0.62 52 1.02 72 1.42 92 1.82
13 0.24 33 0.64 53 1.04 73 1.44 93 1.84
14 0.26 34 0.66 54 1.06 74 1.46 94 1.86
15 0.28 35 0.68 55 1.08 75 1.48 95 1.88
16 0.30 36 0.70 56 1.10 76 1.50 96 1.90
17 0.32 37 0.72 57 1.12 77 1.52 97 1.92
18 0.34 38 0.74 58 1.14 78 1.54 98 1.94
19 0.36 39 0.76 59 1.16 79 1.56 99 1.96
UCPS: Use Current Printer Setting
[Table 2.2.1.2.A] For PPLA
2.2.2. PPLA Group
2.2.2.1. A-2140
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge)
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.2. A-2140L
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge)
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.3. A-2240
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge),
Label Notch (Center)
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.4. A-2240E
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge),
Label Notch (Center)
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.5. A-2240M
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge),
Label Notch (Center)
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.6. A-2240ME
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge),
Label Notch (Center)
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.7. A-3140
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge),
Label Notch (Center)
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.8. CP-2140
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge),
Multi-Column Labels
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.9. CP-2140E
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge),
Multi-Column Labels
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.10. CP-2140L
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge),
Multi-Column Labels
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.11. CP-2140M
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Mark,
Multi-Column Labels
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.12. CP-2141L
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge),
Multi-Column Labels
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.,
6 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.13. CP-2240
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge),
Multi-Column Labels
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.,
6 inches/sec.,
7 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.14. CP-2440
Max. Print Width (inch): 4
Max. Print Length (inch): 39
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge),
Multi-Column Labels
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.,
6 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.15. CP-3140
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge),
Multi-Column Labels
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.16. CP-3140E
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge),
Multi-Column Labels
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.17. CP-3140L
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge),
Multi-Column Labels
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.18. CP-3140LE
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge),
Multi-Column Labels
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.19. CP-3240
Max. Print Width (inch): 4
Max. Print Length (inch): 39
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge),
Multi-Column Labels
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.20. MP-2140
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge),
Multi-Column Labels
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.21. OS-214 plus
Max. Print Width (inch): 4
Max. Print Length (inch): 43
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.22. OS-214NU
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge)
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.23. OS-2130D
Max. Print Width (inch): 3
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.B] 3.00x2.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge)
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.24. OS-2130DE
Max. Print Width (inch): 3
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.B] 3.00x2.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge)
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.25. OS-2140
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge)
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.26. OS-2140E
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge)
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.27. OS-2440D
Max. Print Width (inch): 4
Max. Print Length (inch): 39
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge)
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.,
6 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.28. OS-3240D
Max. Print Width (inch): 4
Max. Print Length (inch): 39
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge)
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.29. OX-100
Max. Print Width (inch): 4
Max. Print Length (inch): 43
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.30. OX-120D
Max. Print Width (inch): 4
Max. Print Length (inch): 43
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge)
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.31. X-1000VL
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge)
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.32. X-1300
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge)
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.33. X-2000v
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge)
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.,
6 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.34. X-2300
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge)
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.,
6 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.35. X-2300E
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge)
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.,
6 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.36. X-2301
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge)
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.,
6 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.37. X-3200
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge)
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.2.38. X-3200E
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Label Sensor Use Current Printer Setting,
Disable,
Label Gap,
Label Mark,
Label Notch (Edge)
Use Current Printer Setting
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 18, 19, 20
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.
Use Current Printer Setting
Label Top (inch) See [Table 2.2.1.2.A] Use Current Printer Setting
Horizontal Offset (inch) See [Table 2.2.1.3.A] Use Current Printer Setting
Vertical Offset (inch) See [Table 2.2.1.4.A] Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (inch) See [Table 2.2.1.5.A] Use Current Printer Setting
2.2.3. PPLB Group
2.2.3.1. A-2140
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
0
115, 120
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
After Print Use Current Printer Setting,
None,
Tear Off
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.2. A-2140L
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100, 0
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
After Print Use Current Printer Setting,
None,
Tear Off
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.3. A-2240
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Label with Notches (Center),
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
After Print Use Current Printer Setting,
None,
Tear Off,
Peel Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.4. A-2240E
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Label with Notches (Center),
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
After Print Use Current Printer Setting,
None,
Tear Off,
Peel Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.5. A-2240M
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Label with Notches (Center),
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
After Print Use Current Printer Setting,
None,
Tear Off,
Peel Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.6. A-2240ME
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Label with Notches (Center),
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
After Print Use Current Printer Setting,
None,
Tear Off,
Peel Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.7. A-3140
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Label with Notches (Center),
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
After Print Use Current Printer Setting,
None,
Tear Off,
Peel Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.8. CP-2140
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Multi-Column Labels,
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100, 0
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.9. CP-2140E
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Multi-Column Labels,
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100, 0
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.10. CP-2140L
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Multi-Column Labels,
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100, 0
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
After Print Use Current Printer Setting,
None,
Tear Off,
Peel Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.11. CP-2140M
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Multi-Column Labels,
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
0
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.12. CP-2141L
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Multi-Column Labels,
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.,
6 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
0
115, 120
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.13. CP-2240
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Multi-Column Labels,
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.,
6 inches/sec.,
7 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
0
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
After Print Use Current Printer Setting,
None,
Tear Off,
Peel Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.14. CP-2440
Max. Print Width (inch): 4
Max. Print Length (inch): 39
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Multi-Column Labels,
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.,
6 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
0
115, 120
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
After Print Use Current Printer Setting,
None,
Tear Off,
Peel Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.15. CP-3140
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Multi-Column Labels,
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.16. CP-3140E
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Multi-Column Labels,
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.17. CP-3140L
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Multi-Column Labels,
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.18. CP-3140LE
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Multi-Column Labels,
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.19. CP-3240
Max. Print Width (inch): 4
Max. Print Length (inch): 39
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Multi-Column Labels,
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100, 0
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
After Print Use Current Printer Setting,
None,
Tear Off,
Peel Off,
Cut,
Partial Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.20. MP-2140
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Multi-Column Labels,
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100, 0
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
After Print Use Current Printer Setting,
None,
Tear Off,
Peel Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.21. OS-214 plus
Max. Print Width (inch): 4
Max. Print Length (inch): 43
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
0
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.22. OS-214NU
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100, 0
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.23. OS-2130D
Max. Print Width (inch): 3
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.B] 3.00x2.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
0
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
After Print Use Current Printer Setting,
None,
Tear Off,
Peel Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.24. OS-2130DE
Max. Print Width (inch): 3
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.B] 3.00x2.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
0
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
After Print Use Current Printer Setting,
None,
Tear Off,
Peel Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.25. OS-2140
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
0
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.26. OS-2140E
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
0
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.27. OS-2440D
Max. Print Width (inch): 4
Max. Print Length (inch): 39
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.,
6 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100, 0
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
After Print Use Current Printer Setting,
None,
Tear Off,
Peel Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.28. OS-3240D
Max. Print Width (inch): 4
Max. Print Length (inch): 39
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Print Method Direct Thermal Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
0
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
After Print Use Current Printer Setting,
None,
Tear Off,
Peel Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.29. OX-100
Max. Print Width (inch): 4
Max. Print Length (inch): 43
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
0
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.30. OX-120D
Max. Print Width (inch): 4
Max. Print Length (inch): 43
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
0
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
After Print Use Current Printer Setting,
None,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.31. X-1000VL
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
0
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
After Print Use Current Printer Setting,
None,
Tear Off,
Peel Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.32. X-1300
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
0
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
After Print Use Current Printer Setting,
None,
Tear Off,
Peel Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.33. X-2000v
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.,
6 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
0
115, 120
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
After Print Use Current Printer Setting,
None,
Tear Off,
Peel Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.34. X-2300
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.,
6 inches/sec..
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
After Print Use Current Printer Setting,
None,
Tear Off,
Peel Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.35. X-2300E
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.,
6 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
After Print Use Current Printer Setting,
None,
Tear Off,
Peel Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.36. X-2301
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.,
6 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
After Print Use Current Printer Setting,
None,
Tear Off,
Peel Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.37. X-3200
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
After Print Use Current Printer Setting,
None,
Tear Off,
Peel Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.3.38. X-3200E
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Print Method Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Label with Gaps,
Label with Notches (Edge),
Label with Mark,
Continuous
Use Current Printer Setting
Gap Height (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Mark Thickness (dot) 16, 24, 32, 40, 48, 56, 64,72,
80, 88, 96, 104, 112, 120,
128, 136, 144, 152, 160
16
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
0, 1, 2, 3, 4..., 13, 14, 15
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-72, -64, -56, -48, -40, -32,
-24, -16, -8, +0, +8, +16, +24,
+32, +40, +48, +56, +64, +72
Use Current Printer Setting
Horizontal Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
Vertical Offset (dot) -120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
0
After Print Use Current Printer Setting,
None,
Tear Off,
Peel Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,,
-127, -125, -120, -115, -110,
-105, -100, -95, -90, -85, -80,
-75, -70, -65, -60, -55, -50,
-45, -40, -35, -30, -25, -20,
-15, -10, -5, 0, 5, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60,
65, 70, 75, 80, 85, 90, 95,
100, 105, 110, 115, 120, 125,
127
Use Current Printer Setting
2.2.4. PPLZ Group
2.2.4.1. A-2140
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing),
Non Continuous (Edge Notch
Sensing)
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
Use Current Printer Setting
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.2. A-2140L
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing),
Non Continuous (Edge Notch
Sensing)
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
Use Current Printer Setting
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.3. A-2240
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing),
Non Continuous (Edge Notch
Sensing),
Non Continuous (Center
Notch Sensing)
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
Use Current Printer Setting
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.4. A-2240E
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing),
Non Continuous (Edge Notch
Sensing),
Non Continuous (Center
Notch Sensing)
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
Use Current Printer Setting
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.5. A-3140
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing),
Non Continuous (Edge Notch
Sensing),
Non Continuous (Center
Notch Sensing)
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
Use Current Printer Setting
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.6. AME-3230
Max. Print Width (inch): 3
Max. Print Length (inch): 40
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.B] 3.00x2.00"
Resolution 203 dpi 203 dpi
Print Method Use Current Printer Setting,
Direct Thermal
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing)
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.
2 inches/sec.,
3 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.7. AME-3230B
Max. Print Width (inch): 3
Max. Print Length (inch): 40
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.B] 3.00x2.00"
Resolution 203 dpi 203 dpi
Print Method Use Current Printer Setting,
Direct Thermal
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing)
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.
2 inches/sec.,
3 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.8. AME-3230W
Max. Print Width (inch): 3
Max. Print Length (inch): 40
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.B] 3.00x2.00"
Resolution 203 dpi 203 dpi
Print Method Use Current Printer Setting,
Direct Thermal
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing)
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.
2 inches/sec.,
3 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.9. CP-2140
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing),
Non Continuous (Edge Notch
Sensing),
Multi-Column Labels
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
Use Current Printer Setting
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.10. CP-2140E
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing),
Non Continuous (Edge Notch
Sensing),
Multi-Column Labels
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
Use Current Printer Setting
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.11. CP-2140M
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Mark
Sensing),
Multi-Column Labels
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.12. CP-2240
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing),
Non Continuous (Edge Notch
Sensing),
Multi-Column Labels
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.,
6 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
Use Current Printer Setting
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.13. CP-2440
Max. Print Width (inch): 4
Max. Print Length (inch): 39
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing),
Non Continuous (Edge Notch
Sensing),
Multi-Column Labels
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.,
6 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
Use Current Printer Setting
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.14. CP-3140L
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing),
Non Continuous (Edge Notch
Sensing),
Multi-Column Labels
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
Use Current Printer Setting
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.15. CP-3140LE
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing),
Non Continuous (Edge Notch
Sensing),
Multi-Column Labels
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
Use Current Printer Setting
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.16. CP-3240
Max. Print Width (inch): 4
Max. Print Length (inch): 39
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing),
Non Continuous (Edge Notch
Sensing),
Multi-Column Labels
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
Use Current Printer Setting
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
None,
Tear Off,
Peel Off,
Cut,
Partial Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.17. MP-2140
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing),
Non Continuous (Edge Notch
Sensing),
Multi-Column Labels
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
Use Current Printer Setting
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.18. OS-214NU
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing),
Non Continuous (Edge Notch
Sensing)
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
Use Current Printer Setting
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.19. OS-2140
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing),
Non Continuous (Edge Notch
Sensing)
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
Use Current Printer Setting
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.20. OS-2140E
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing),
Non Continuous (Edge Notch
Sensing)
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
Use Current Printer Setting
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off,
Cut
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.21. OS-2440D
Max. Print Width (inch): 4
Max. Print Length (inch): 39
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Use Current Printer Setting,
Direct Thermal
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing),
Non Continuous (Edge Notch
Sensing)
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.,
6 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
Use Current Printer Setting
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.22. OS-3240D
Max. Print Width (inch): 4
Max. Print Length (inch): 39
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Print Method Use Current Printer Setting,
Direct Thermal
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing),
Non Continuous (Edge Notch
Sensing)
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
Use Current Printer Setting
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.23. X-2000v
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing),
Non Continuous (Edge Notch
Sensing)
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.,
6 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
Use Current Printer Setting
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.24. X-2300
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing),
Non Continuous (Edge Notch
Sensing)
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.,
6 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
Use Current Printer Setting
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.25. X-2300E
Max. Print Width (inch): 4
Max. Print Length (inch): 100
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 203 dpi 203 dpi
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing),
Non Continuous (Edge Notch
Sensing)
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.,
6 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
Use Current Printer Setting
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.26. X-3200
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing),
Non Continuous (Edge Notch
Sensing)
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
Use Current Printer Setting
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.2.4.27. X-3200E
Max. Print Width (inch): 4
Max. Print Length (inch): 50
Setting Item Range Default
General
Media Size See [Table 2.2.1.1.A] 4.00x3.00"
Resolution 300 dpi 300 dpi
Print Method Use Current Printer Setting,
Direct Thermal,
Thermal Transfer
Direct Thermal
Media Type Use Current Printer Setting,
Continuous,
Non Continuous (Web
Sensing),
Non Continuous (Mark
Sensing),
Non Continuous (Edge Notch
Sensing)
Use Current Printer Setting
Media Calibration Disable, Enable Disable
Printer Settings
Darkness Use Current Printer Setting,
1, 2, 3, 4..., 13, 14, 15..., 28,
29, 30
Use Current Printer Setting
Print Rate Use Current Printer Setting,
1 inches/sec.,
2 inches/sec.,
3 inches/sec.,
4 inches/sec.,
5 inches/sec.
Use Current Printer Setting
Label Top (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
Horizontal Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
Use Current Printer Setting
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Vertical Offset (dot) Use Current Printer Setting,
-120, -115, -110, -105, -100,
-95, -90, -85, -80, -75, -70,
-65, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 105, 110,
115, 120
Use Current Printer Setting
After Print Use Current Printer Setting,
Tear Off,
Cut,
Peel Off
Use Current Printer Setting
Tear-Off Adjust Position (dot) Use Current Printer Setting,
-64, -60, -55, -50, -45, -40,
-35, -30, -25, -20, -15, -10,
-5, 0, 5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 64
Use Current Printer Setting
Reprint After Error Use Current Printer Setting,
Always,
Never
Use Current Printer Setting
2.3. Media Calibration
To detect the media gap or mark correctly when print job with Linux printer driver, it is necessary to
do media calibration before the first print.
The media calibration method is described as below:
A. DO NOT print the test page immediately after the printer driver is installed.
B. Set Media Calibration to Enable in Printer Properties dialog as [Figure 2.3.A].
a. Select "Printer Options" menu.
b. Set "Media Calibration" to Enable.
c. Click "Apply" button.
[Figure 2.3.A]
C. Click "Print Test Page" button to do media calibration in Printer Properties dialog as [Figure
2.3.B].
a. Select "Settings" menu.
b. Click "Print Test Page" button to send a job to the printer to execute media calibration. After
"Print Test Page" button is clicked, the "Submitted" dialog is displayed. See [Figure 2.3.C].
Click "OK" button on the "Submitted" dialog to close it.
At this condition, printer driver will send command to the printer to execute media calibration
and the test page data will be ignored by printer driver and will not be sent to the printer.
a.
b.
c.
[Figure 2.3.B]
[Figure 2.3.C]
D. Set Media Calibration to Disable.
a. Select "Printer Options" menu.
b. Set "Media Calibration" to Disable.
c. Click "Apply" button.
[Figure 2.3.D]
a.
b.
a.
b.
c.
E. Click "Print Test Page" button to print test page. See [Figure 2.3.E].
After the Media Calibration is set to Disable, printer driver will process the printing data and send
the printing data to the printer to print out.
Now the label can be printed correctly.
[Figure 2.3.E]
a.
b.
3. Install / Uninstall Driver
3.1. Install Driver
To install driver, please extract the driver package to the temporarily folder, for example:
LinuxDriver.
Then switch into the LinuxDriver folder and input the following command line in terminal window.
$ sudo bash ./install
3.2. Uninstall Driver
To uninstall driver, please switch into the temporarily folder you created when you install the driver
and input the following command line in terminal window.
$ sudo bash ./uninstall
If the temporarily folder does not exist, you can extract the driver package to the temporarily folder,
for example: LinuxDriver.
Then switch into the LinuxDriver folder and input the following command line in terminal window.
$ sudo bash ./uninstall
4. Install Printer
4.1. USB Port
The procedures for installing printer in Ububtu 14.04 LTS via USB port are as following. To install
printer in Fedora Linux, please check the Fedora Linux web site.
A. Connect the printer with USB cable or other supported cable to PC and make sure the printer is
powered on and in Ready status.
B. Click the System Settings button on the tool bar to open the System Settings dialog.
See [Figure 4.1.A].
[Figure 4.1.A]
C. Click "Printers" button in System Settings dialog to open Printers dialog. See [Figure 4.1.B].
[Figure 4.1.B]
D. In Printers dialog, click "Add" button to open New Printer dialog. See [Figure 4.1.C].
[Figure 4.1.C]
E. In New Printer dialog, select the printer name of the connected printer under "Devices" list then
click "Forward" button. See [Figure 4.1.D].
[Figure 4.1.D]
F. In Choose Driver dialog, select "Select printer from database" then select "ARGOX" in the Makes
list and click "Forward" button. See [Figure 4.1.E].
[Figure 4.1.E]
G. Select model name of the printer in "Models" list and select the driver name in "Drivers" list then
click "Forward" button. See [Figure 4.1.F].
[Figure 4.1.F]
H. In Describe Printer dialog, we can input the printer name, description and location of the printer.
Click "Apply" button to go the next step. See [Figure 4.1.G].
[Figure 4.1.G]
I. After a while, the print test page confirmation dialog will be displayed. See [Figure 4.1.H].
We click "Cancel" button to cancel the print test page process; we also can click "Print Test Page"
button to print a test page.
[Figure 4.1.H]
J. In Printer Properties dialog, we can change the settings of the printer driver, we also can view the
printer status and print a test page. See [Figure 4.1.I].
Click "OK" button in Printer Properties dialog to finish the install printer procedure.
[Figure 4.1.I]
4.2. Network Port
The procedures for installing printer in Ububtu 14.04 LTS via network port are as following. To
install printer in Fedora Linux, please check the Fedora Linux web site.
A. Connect the printer with network cable to PC and make sure the printer is powered on and in
Ready status.
B. Click the System Settings button on the tool bar to open the System Settings dialog.
See [Figure 4.2.A].
[Figure 4.2.A]
C. Click "Printers" button in System Settings dialog to open Printers dialog. See [Figure 4.2.B].
[Figure 4.2.B]
D. In Printers dialog, click "Add" button to open New Printer dialog. See [Figure 4.2.C].
[Figure 4.2.C]
E. In New Printer dialog, select "LPD/LPR Host or Printer" in "Select Device" field. Input host IP
address and queue name in "Location of the LPD network printer" field and click "Forward"
button. See [Figure 4.2.D]. The queue name can be specified by user.
[Figure 4.2.D]
F. In Choose Driver dialog, select "Select printer from database" then select "ARGOX" in the Makes
list and click "Forward" button. See [Figure 4.2.E].
[Figure 4.2.E]
G. Select model name of the printer in "Models" list and select the driver name in "Drivers" list then
click "Forward" button. See [Figure 4.2.F].
[Figure 4.2.F]
H. In Describe Printer dialog, we can input the printer name, description and location of the printer.
Click "Apply" button to go the next step. See [Figure 4.2.G].
[Figure 4.2.G]
I. After a while, the print test page confirmation dialog will be displayed. See [Figure 4.2.H].
We click "Cancel" button to cancel the print test page process; we also can click "Print Test Page"
button to print a test page.
[Figure 4.2.H]
J. In Printer Properties dialog, we can change the settings of the printer driver, we also can view the
printer status and print a test page. See [Figure 4.2.I].
Click "OK" button in Printer Properties dialog to finish the install printer procedure.
[Figure 4.2.I]