aluminum tool catalog available separately. - dc |...
Post on 16-Feb-2019
219 Views
Preview:
TRANSCRIPT
Audi Authorized Collision Repair Tool CatalogAluminum Tool Catalog available separately.
P. 1 | AUDI AUTHORIZED COLLISION REPAIR TO O L C ATA LO g I N T R O D U C T I O N | P. 2
Audi Authorized Collision Repair Facility Program
The Audi Authorized Collision Repair Facility Program has been established to meet the
technological challenges inherent in Audi award-winning vehicles.
Highly specialized collision repair standards are required to maintain the high crash standards Audi engineered into
steel and high-tensile steel frame, body and chassis components. Each specialized collision repair facility is equipped
with Audi factory-recommended tools and equipment needed to perform high-tensile steel collision repairs. Intensive
training and certification at I-CAR® facilities help ensure the highest level of collision repair expertise.
With this combination of factory-authorized tools, equipment and trained technicians, Audi offers collision repair
shops the opportunity to join one of the fastest growing import automotive markets in North America.
Each Audi Authorized Collision Repair Facility is equipped with all of the Audi factory-recommended tools and
equipment to meet Audi Authorized Collision Repair Facility Program requirements.
A complete program of Audi authorized tools, equipment and training certification is available to collision repair
facilities in order for them to become Audi Authorized Collision Repair Facilities. Continuous technician support
provides updates on repair procedures and equipment use.
After the collision repair facility equipment installation, support from Audi continues, furnishing website training
updates and technical advice. During the repair, Audi will assist with parts procurement and provide technical repair
procedure advice, when necessary.
Only collision repair facilities that meet exacting Audi requirements receive authorization to become Audi Authorized
Collision Repair Facilities.
Call 1-800-892-9650 to contact your program representative.
P. 3 | AUDI AUTHORIZED COLLISION REPAIR TO O L C ATA LO g T O O L S A N D E Q U I P M E N T | P. 4
Tools and Equipment
Tool Number Description Page Number
Car-O-Liner Bench Systems & Accessories
VAS 65271 Professional Measuring and Alignment System 19
VAS 65281 Professional Plus Measuring and Alignment System 20
VAS 6526/1 EVO1 Basic Anchor System 21
VAS 6526/1-1 EVO1 Basic Anchor System, Tool Trolley 21
VAS 6526/2 EVO2 Extended Anchor System 21
VAS 6526/3 EVO3 Universal Anchor System 22
VAS 6526/4 Hydraulic Jack Kit 22
VAS 6526/5 Anchor Set 23
VAS 6526/61 Tool Trolley, Basic 23
VAS 6526/71 Tool Trolley, Basic Plus 23
VAS 6526/81 Tools Panel 24
VAS 6526/91 Wall System 24
VAS 6526/10 Clamp Set, Special 24
VAS 6526/11 Measuring Unit, Vision X3 25
VAS 6526/12 Measuring Unit, Vision EVO 26
VAS 6526/13 Software Upgrade 27
VAS 6526/14 Basic Bench, 4.20m, Quick 42 27
VAS 6526/14-1 Ramp Set 28
VAS 6526/15 10-Ton Alignment Unit 28
VAS 6526/16 Quick Anchoring Set 29
VAS 6526/17 Clamp Set 29
VAS 6526/18 Pull Chain Set 30
VAS 6526/19 Pull Bar Set 30
VAS 6526/20 Pull Clamp Set 31
VAS 6526/21 Winch 31
Additional Optional Equipment
VAG 1959A Welding Unit (or equivalent) 32
VAS 6388A Welding and Brazing System (or equivalent) 33
VAS 6741 Welding and Brazing System (or equivalent) 34
1 Repair facilities must purchase to receive authorization. Only one of the approved welders is required. Only one of the approved measuring systems is required. Only one of the approved tool organization systems is required. 2 Must have this or equivalent approved items.
Approved welders and welder accessories include technologies that are continually updated. Tool and equipment numbers, pictures, descriptions and prices are subject to change without notice.
For repair facility eligibility and for the latest authorized updates of equivalent tools and equipment, contact your Audi authorized specialist at 1-800-892-9650.
Welder Electrical Installation Requirements: 208/220 Volt 3 Phase 60 Amp Breaker, #4 wire.
For additional product information or to place an order, visit us at www.tools.audiusa.com, email vwaudi@snapon.com, or call 1-800-892-9650. Product information is subject to change without notice.
Tool Number Description Page Number
Welders & Accessories
VAS 65451 Wielander + Schill Resistance Inverter Spot Welder 5
VAS 65351 Elektron Resistance Inverter Spot Welder 6
VAS 65301 Tecna Resistance Inverter Welder 7
VAS 67551 Car-O-Liner CTR12000 Welder 8
VAG 17311, 2 Vario Weld Breaker 9
VAG 1731/21, 2 Replacement Breaker for High-Strength Steel 9
Miscellaneous Tools
VAG 1523B2 Pneumatic Sabre Saw (or VAS 6780) 10
RAE 5120012 Body Separation Chisel with Handle 10
VAG 2005B Pneumatic Adhesive Gun (for the 50 mL cartridge of DP490) 11
VAS 6453 Pneumatic Adhesive Gun (for the 400 mL cartridge of DP490) 11
VAS 52372 Double Cartridge Gun (optional) 12
Celette Bench & Accessories
SC.40014 4-Ton Super Hydraulic Kit 12
VAG 1438 Mechanical Door Brace (Celette ATS.1802) 13
918.920 Orientable Engine Holding Device 13
ESP.MP.02 Work Stand 13
ROLL.100 Trolley 13
SVN.05.31121 Sevenne Composition 14
955.96021 Set of (6) Universal Crossmembers 14
MZ450.4001 Set of (22) MZ Towers and (4) Wedges 15
MZ450.9051 MZ Towers Storage Trolley 15
MZ2500.000 MZ+ Set 15
9113.0631 Side Portal Gantry 16
9121.5231 Multi-Function Support 16
ATD.1491 Pulling Flange 16
ATD.01.1491 Kit for Flange ATD.149 17
SN99.00 Pulling Straps, Set of 2 17
ATD.165 Pulling Accessory 17
ATD.01.801 Pulley Block 18
CSK15.111 Kit for Multiple Pulling 18
CAT500 Pulling Set 18
P. 5 | AUDI AUTHORIZED COLLISION REPAIR TO O L C ATA LO g T O O L S A N D E Q U I P M E N T | P. 6
Resistance Inverter Spot Welder VAS 6545
Setting the welding parameters is carried out using simple, self-explanatory
symbols. The welding programs are for high- and higher-tensile panels, for
spot-weld-bonded connections and for galvanized panels. Individual storage
of welding parameters is possible. In addition, the system is suitable for
documentation and administration of work order details on A4 paper. Software
updates can be carried out using an SD card (upload). The material recognition
function is performed with a material test program. Current control and pressure
monitoring is provided. The welding process is monitored and the actual values
are shown in the display.
The C-arms can be exchanged by means of a quick positioning feature. The
C-arms can be opened via a folding catch, thereby enabling access to the body,
for example, behind profile sections.
Specifications:
• Powersupply3x190-240Volt50-60Hz • Connectorcable(Cu):5m/4x0,157sq.in.)
• Settingrange0-13kA • Airpressure:90psi+/-5%
• Weldingcurrent:DC • Refrigerant:water+anticorr.
• Continuousduty100%ED:2,8kA • Tankvolume:85l/22.5gallon
• Opencircuitvoltage12VDC • Dimensions:810mmx560mmx750mm
• Max.Powerwith5%ED:156kVA • Weldingleadlength:3000mm
• Fuse(slowblow):63A • Weight:119kg/262lbs.
Includes:
• Currentsource • 1CStransformertongswithintegratedC-armsize1
• 1CStransformertongs • 1balancerwithspring-loadedcable
• 1controlunitwithwatertank80l • 1mountingsetforC-arms
Accessory Packs
VAS 6545/1 Transformer x-gun
With watercooling up to the tips 3 x 200-240 Volt / 50-60Hz ≤ 13.000 A / 65 A breaker.
VAS 6545/2 Single-sided gun
For c-trafo aircooled, with earth cable and accessory box.
On arm side.
VAS 6545/3 Single-sided gun
For x-trafo aircooled, with earth cable and accessory box.
Warranty: 24 Months
Manufactured by: Wielander & Schill
Supplied by: Snap-on Business Solutions 1-800-892-9650
Resistance Inverter Spot Welder VAS 6535
The resistance spot welder VAS 6535 features a central connection and a tool
detection function. An impedance measurement is used to regulate the welding
parameters automatically. In this way, a constant level of quality of the weld
points is assured. With VAS 6535, it is possible to store the weld processes and to
document them. Disturbance variables such as dirt, adhesive, etc., are detected and
compensated for. A compact flash memory card allows the software of the unit to
be updated at any time.
Mobile resistance spot welder with inverter technology can be updated and features
impedance measurement and welding-parameter regulation.
Specifications:
• Dimensions:661mm(26")x661mm(26")x1372mm(54")
• Weight:171kg(376lbs.)
Power Supply Unit:
• Mainsconnection:208–240V3Phase • Idlevoltagemax.:23VDC
• Mainsconnectionleadø/length:6mm2/10m • Weldingcurrentregulated:max.12,000ADC
• Fuseprotectionatleast:60Adelay • Watertankvolume:approx.32l
• Mainsfrequency:60Hz • Ambienttemperature:40C°
• Mainsconnectionoutput:42kVA • Typeofprotection:IP21
• Ratedoutputat50%ED:60kVA
X Tongs:
• Cablelength:2.5m • Weightoftongswithoutcables:8kg
• Weldingcurrent:max.12,000ADC
Includes:
• Mobilemainsunit • Linearbalancer
• XTongs • CoolingUnit
• Weldinggun • HeatExchanger
• Quickdentremovalhammer • SpecialVASWeldingPrograms
Accessory Packs
VAS 6535/1 Accessory Package
• Electrodeset02/06/415MXcoded • Abrasivespongefine
• Electrodeset05MXcoded • ElectrodecapsA13R25(6pcs.)
• Electrodeset11/280MXcoded • ElectrodecapsA13R15(6pcs.)
• Multi-purposeelectrodeSB8forplanishingwork
Warranty: 24 Months
Manufactured by: Elektron, Bremen, Germany
Supplied by: Snap-on Business Solutions 1-800-892-9650
Welder Electrical Installation Requirements: 208/220 Volt 3 Phase 60 Amp Breaker, #4 wire.
For additional product information or to place an order, visit us at www.tools.audiusa.com, email vwaudi@snapon.com, or call 1-800-892-9650. Product information is subject to change without notice.
VAS 6545/1
VAS 6545/2
VAS 6545/3 VAG 6535/1
P. 7 | AUDI AUTHORIZED COLLISION REPAIR TO O L C ATA LO g T O O L S A N D E Q U I P M E N T | P. 8
Resistance Inverter Spot Welder VAS 6530
The VAS 6530 Resistance Spot Welder is recommended for general body repairs on
vehicles with high- and ultra-high-tensile-strength steel panels, especially for workshops
with critical mains power supply. The inverter technology, in conjunction with adaptive
smart control, makes quality spot-weld joints possible. Variations in joint structure
are detected and compensated for, if possible. If a weld is not possible, a text warning
message will be issued by the unit. Operation is by touch screen via three different
weldingmodes:manual,smart/automaticormanufacturer-specificprograms.Witha
USB interface, new welding programs can be uploaded or recorded; welding results can
be copied for further processing on a PC. The water-cooled C-transgun delivers equal
electrode contact force with electrode arms up to 635mm in length.
Specifications:
• Mainsconnection:230V3Phase60Hz • Electrodecontactforcemax.:450daN(1,011lbs.)
• Breakerprotection:60Adelayed • Dimensions:600mm(24")x680mm(27.2")
• Mainsconnectionlead:17kVA x1220mm(48.8")
• Weldingcurrent:max.14,000ADC • Weight:130kg(286lbs.)
Includes:
• Mainunitwithinverterandtouchscreen • Watercoolermodulefortransformer,transgun,
• InverterC-transgun,pneumaticwithshortelectrode armsandelectrodes
• C-arm,length85mmwithelectrode,water-cooled • Rubbermainspowercord,8monretractablestowage
• Cartwithlargewheelsatrearandbrakedcastorsatfront facilityoncart
• C-transgunholderandswivelarmwithadjustablebalancer • ElectrodecapkeyforelectrodesuptoDN21
Accessory Packs
VAS 6530/1 Accessory Package
• C-arm,long,505mmwithangledelectrodes,short(water-cooled)
• C-arm,small,air-cooledforwheelhousingswithball-headelectrode
• Ball-headelectrode,water-cooledwithmushroomheadinsert
• Longangledelectrode,water-cooled
VAS 6530/2 Accessory Package
• C-arm,medium,355mmwithangledelectrodes,short(water-cooled)
• Support,longforoffsetelectrodes
• Offsetelectrode,water-cooled
• Electrode,longstraight,water-cooledonarmside
Warranty: 24 Months
Manufactured by: TECNA S.p.A.
Supplied by: Snap-on Business Solutions 1-800-892-9650
1Specialvoltageversionsavailable:220/230V&460V. 2Recommendation32A(DelayedAction). 3WiththeC80yoke.Weightvarieswithotheryokes.
For additional product information or to place an order, visit us at www.tools.audiusa.com, email vwaudi@snapon.com, or call 1-800-892-9650. Product information is subject to change without notice.
Car-O-Liner CTR12000 Welder VAS 6755
Designed to simplify vehicle collision repair, the high-power, medium-frequency
inverter operation of the CTR12000 is ideal for today’s newer materials, including
high, ultra-high, and laminated steels. The process-regulated system provides clear
qualityassurance.Productbenefitsinclude:
• Automatic recognition of total material thickness via Pulse-Sonar-System
• Automatic recognition of material type via Virtual Generator
• Automatically establishes required settings to ensure the proper weld nugget
• Advanced quality control system that monitors and adjusts the welder to
guarantee the total energy input
• Powerful, with welding current up to 12,000 Amps
• Greater Power Efficiency via the 10-kHz Transformer C-Gun
• Completely liquid-cooled welding, from the power module all the way to the caps, providing a greater Duty Cycle
• Easily upgraded via convenient USB port
• Reproducible welding quality
• Welding data documentation with the use of WinSpot-QS-Software
Specifications:
• Supplyvoltage:3×400V50Hz1 • Maxpower:75kVA
• Fuse(delayedaction):16-32A2 • Protectionclass:IP21
• Insulationclass:F • Compressedairsupply:8bar(116psi)
• Powerunitfortransformergun:10kHz • Outputcurrent:0-200A
• Outputvoltage:560V • Coolingpower:1000W
• Tankcapacity:20L • Flowrate:6L/minute
• Dimensions(H×W×D):approx.1220×680×800mm • Weight:approx.95kg
• Primaryvoltage/frequency:560V/10kHz • Primarypower(100%dutycycle):20kVA
• Protectionclass:IP21 • Insulationclass:F
• Cooling:Water • Weldingcurrent:12,000 A
• No-loadvoltage:12,5VDC • Electrodeforce:0-5kN
• Weight(dep.uponfitting)approx.:11kg • Cablelength:6m
Includes:
• Electrodearms,4pcs
• Accessoriescase,Electrodesetand16Ammelectrodecaps
• Supportarmwithbalancerblock
Optional accessories:
• CompleteSet:Spotter/DentFixer
• WinSpotQS-WeldingDataDocumentation
P. 9 | AUDI AUTHORIZED COLLISION REPAIR TO O L C ATA LO g T O O L S A N D E Q U I P M E N T | P. 10
Vario Weld Breaker VAg 1731
This vario weld breaker is the most versatile unit for speedy removal of spot-welds
onvehiclebodywork.Itcanberotated360,°andwiththesafetyfixingsystem,side
slipping of the drill is almost non-existent. The recommended working speed of the
vario breaker is approximately 1200 r.p.m.
Specifications:
• Idlingspeed:1300r.p.m.
• Airpressure:6-8bar
• Weight:1.8kg.
Includes:
• Varioweldbreaker • Spanner
• Drillbit8mm • Case
• Airvolumereducer
Replacement Parts:
• RAE608018Jumbomatic • RAE607013DrillbitVAPOØ8mm
• RAE607001DrillbitØ6mm • RAE607021DrillbitØ9mm
• RAE607011DrillbitTIN-GOLDØ8mm • RAE617021DrillbitØ10mm
Warranty: 24 Months (does not include bits)
Manufactured by: Wielander & Schill, Villingen-Schwenningen
Supplied by: Snap-on Business Solutions 1-800-892-9650
Replacement Breaker for High-Strength Steel VAg 1731/2
Areaofapplication:Bodyrepairsanddrillingofspot-weldinallsteels.Consumable/sparefor
spot-weld breaker VAG 1731.
Includes:
• 3Varianticbreakers • Breakingfluid
• BTRbreaker • Centerpunch
Replacement Parts:
• RAE620200Varianticbreaker,1pc • RAE620002BTRbreaker,3pcs
• RAE620205Varianticbreaker,3pcs • RAE628000Breakingfluid
• RAE620001BTRbreaker,1pc • RAE628005Centerpunch
Manufactured by: Wielander & Schill, Villingen-Schwenningen
Supplied by: Snap-on Business Solutions 1-800-892-9650
Welder Electrical Installation Requirements: 208/220 Volt 3 Phase 60 Amp Breaker, #4 wire.
Body Separation Chisel with Handle RAE 512001
Designed to quickly separate body panels while the guard protects against sharp edges.
Warranty: 24 Months
Supplied by: Snap-on Business Solutions 1-800-892-9650
Pneumatic Sabre Saw (or VAS 6780) VAg 1523B
Sabre saw for versatile, rational and trouble-free use. The compact design allows
for distortion-free work in hard-to-reach areas of the body.
The VAG 1523B is a further development of the saw VAG 1523A already in service and
therefore complies with the strict requirements of the trade association for insurance liability
and occupational safety, and health and associated accident prevention regulations.
As panels become increasingly harder in the area of body construction, cutting tools have to meet
tougher requirements. The VAG 1523B is made with high precision and quality and equates to the
latest state of technology.
Specifications:
• Drive:Pneumatic • AirPressure:6-8bar
• Output:Approximately300Watt • Strokefrequency:Approximately12,000stroke/min
Includes:
• Pneumaticsaw • Sawblade32tpiformetalupto1/0mm
• Sawblade1x14tpiforplasticandwood • Wrenchfortoolholder
• Sawblade18tpifortightradii • Sawblade24tpiformetalupto2.5mm
• OperatingManual
Replacement Parts:
• VAG1523/1Sawblade,24tpiformetalupto2.5mm,1pkof10
• VAG1523/2Sawblade,32tpiformetalupto1.0mm,1pkof10
• VAG1523/3Sawblade,14tpiforplasticandwood,1pkof10
• VAG1523/4Sawblade,18tpifortightradii,1pkof10
• VAG1523/5 File Set
Warranty: 24 Months (does not include blades)
Manufactured by: Wielander & Schill, Villingen-Schwenningen
Supplied by: Snap-on Business Solutions 1-800-892-9650
For additional product information or to place an order, visit us at www.tools.audiusa.com, email vwaudi@snapon.com, or call 1-800-892-9650. Product information is subject to change without notice.
P. 11 | AUDI AUTHORIZED COLLISION REPAIR TO O L C ATA LO g T O O L S A N D E Q U I P M E N T | P. 12
Pneumatic Adhesive Gun VAS 6453
Used to apply 2-component epoxy adhesive foam (D 506 110 A3) to
AudiRS4batterytray.Includes2006–2007AudiRS4.TheVAS6453
with400mladhesivecartridgesisalsorequiredforrepairsonthefollowing:
A4 Sedan roof rack, A4 Avant roof rack and roof wiring, and A5 Coupe roof rack
Warranty: 24 Months
Manufactured by: 3M Deutschland GmbH
Supplied by: Snap-on Business Solutions 1-800-892-9650
For additional product information or to place an order, visit us at www.tools.audiusa.com, email vwaudi@snapon.com, or call 1-800-892-9650. Product information is subject to change without notice.
Pneumatic Adhesive Gun VAg 2005B
The pneumatic glue gun VAG 2005B is used with adhesive
DA 001 730A1 for professional body repairs. The gun can be
used consistently without interruption and for working large
quantities of adhesive without causing undue fatigue to the
operator. The adhesive (2-component adhesive) is injected in
exact quantities and the (2) components are mixed optimally,
which allows it to be applied without any mess.
Includes:
• Plastic case
• (1) pneumatic glue gun
• (18) mixing nozzles
Note:
TherepairprocedureisdescribedintherespectiveWorkshopManualforthefollowingmodels:VWPassat97>,
AudiA3,A4,A698>,A8.AdhesivecartridgesandmixingnozzlesareavailablefromtheVolkswagenSpareParts
Department. Adhesive Cartridge Part No. DA 001 730A1.
Warranty: 24 Months
Manufactured by: 3M, Neuss
Supplied by: Snap-on Business Solutions 1-800-892-9650
4-Ton Super Hydraulic Kit SC.40014
The included rams are designed so they can fit in the MZ tower to perform a push
to height. The (5) extensions with their connectors will help in reaching any points.
The (6) different sockets allow the tech to choose the proper attachment for
the application.
Includes:
• (5)extensions(SK.2400,SK.2401,SK.2402,SK.2403,SK.2404)
• (6)sockets(SK.3401,SK.3402,SK.3403,SK.3404,SK34.06,SK.4401)
• (5)connectors(SK.1404,SK.1405)
• (3)rams(VS4.134,VA4.054,VA4.024)
• (1)handpump(HYP.S.1404)
• (1)storagebox(HYA.4)
Warranty: 24 Months
Manufactured by: Celette GmbH, Kehl
Supplied by: Snap-on Business Solutions 1-800-892-9650
Double Cartridge Gun (Optional) VAS 5237
With the double cartridge gun VAS 5237, window bonding set DA 004 600
A2 (2 x 200 ml) can be processed. The vehicle is ready to drive after just 3
hours by using the 2-component system.
Note:
The procedure is described in Workshop Manual
“General Body Repairs, Exterior; Glazing.”
Includes:
• (1) air pressure operated double cartridge gun
Warranty: 24 Months
Manufactured by: Teroson GmbH, Heidelberg
Supplied by: Snap-on Business Solutions 1-800-892-9650
P. 13 | AUDI AUTHORIZED COLLISION REPAIR TO O L C ATA LO g T O O L S A N D E Q U I P M E N T | P. 14
Orientable Engine Holding Device 918.920
Easy to secure on the vehicle, assists the technician during the removal
or lifting of the engine compartment.
Warranty: 24 Months
Manufactured by: Celette GmbH, Kehl
Supplied by: Snap-on Business Solutions 1-800-892-9650
Trolley ROLL.100
This robust trolley allows the technician to move a vehicle around when
it is not drivable due to heavy damage or removal of the suspension.
Warranty: 24 Months
Manufactured by: Celette GmbH, Kehl
Supplied by: Snap-on Business Solutions 1-800-892-9650
Work Stand ESP.MP.02
Stand made of metal to allow the technician to reach high area or the
roof area of the vehicle during repair work.
Warranty: 24 Months
Manufactured by: Celette GmbH, Kehl
Supplied by: Snap-on Business Solutions 1-800-892-9650
Mechanical Door Brace (Celette: ATS.1802) VAg 1438
Used to maintain correct door-aperture size during bodywork repairs and
as an aid when welding in various sheet metal components. Used also for
light alignment. Suitable for all Volkswagen/Audi vehicles.
Warranty: 24 Months
Supplied by: Snap-on Business Solutions 1-800-892-9650
For additional product information or to place an order, visit us at www.tools.audiusa.com, email vwaudi@snapon.com, or call 1-800-892-9650. Product information is subject to change without notice.
Sevenne Composition SVN.05.3112
The bench has a robust, welded-steel design featuring plane-
milled mounting surfaces with hole patterns to allow the
modular crossbeams to be fitted. The milled surface assures
the accuracy of the repair. The attachment system provides a
means of quickly adjusting the wheel supports and anchoring
clamps. The 10-ton pulling unit can attach at any point around
the bench and has both tilt and rotate capability to allow precise
positioning. It comes with height extension and safety cable.
The cable is designed to prevent accidents, which could occur
in case of tensioning chain, clamp or hook failure despite all
safety precautions.
Features:
• Directpullsstraightline
• Beampivotsformulti-anglepulling
• Easytomaneuver
Includes:
• Sevennebench9121.012 • PullingunitSVN93.201
• Setof(4)clamps9123.023 • Verticalarmextension
• Storagetrolley9123.920 • SafetycableCAS.2000
• Setof(4)wheels9121.513
Warranty: 24 Months
Manufactured by: Celette GmbH, Kehl
Supplied by: Snap-on Business Solutions 1-800-892-9650
Set of (6) Universal Crossmembers 955.9602
The crossmembers are designed to accept all straightening fixture
sets. The service is very easy with a sturdy and robust steel-welded
construction with interchangeable nut cages.
Warranty: 24 Months
Manufactured by: Celette GmbH, Kehl
Supplied by: Snap-on Business Solutions 1-800-892-9650
Safety cable CAS.2000 Vertical arm extension
P. 15 | AUDI AUTHORIZED COLLISION REPAIR TO O L C ATA LO g T O O L S A N D E Q U I P M E N T | P. 16
MZ+ Set MZ2500.000
The MZ+ Set is distinguished by the fact that the specific head and universal
adapter pin are separate. By making this one-off investment in the MZ+
straightening bracket system, straightening bracket sets can be used from Fall 2010.
Includes:
• (1)sheetmetalcontainerwithinsert • (2)reinforcementplates(MZ2500.C05)
• (10)adapterpins(MZ2500.P100) • (4)hexagonsocketheadboltswith
• (14)adapterpins(MZ2500.P160) CHc10-30
• (6)adapterpins(MZ2500.P220) • (34)hexagonsocketheadboltswith
• (4)adapterpins(MZ2500.P310) (TFHc10-25)
• (1)hexagonsocketheadkey • (4)hexagonnutsM10Nylstop
(ME975MALEDE6) • (4)washers(LLU10)
• (4)rollers(RPS.0583001)
Warranty: 24 Months
Manufactured by: Celette GmbH
Supplied by: Snap-on Business Solutions 1-800-892-9650
Set of (22) MZ Towers and (4) Wedges MZ450.400
Includes:
• (6)MZ.080 • (4)MZ.260
• (4)MZ.140 • (1)MZ.601
• (1)MZ.141 • (1)MZ.602
• (1)MZ.142 • (2)TV.400
• (4)MZ.200
Warranty: 24 Months
Manufactured by: Celette GmbH, Kehl
Supplied by: Snap-on Business Solutions 1-800-892-9650
MZ Towers Storage Trolley MZ450.905
The basic MZ Towers set will accept all fixture sets for current and future models.
The setup on the bench is done according to the setup sheet provided with each
fixture set. During the straightening process, the fixtures can be released from the
towers by pulling the retaining pin.
Note: MZ towers sold separately.
Warranty: 24 Months
Manufactured by: Celette GmbH, Kehl
Supplied by: Snap-on Business Solutions 1-800-892-9650
For additional product information or to place an order, visit us at www.tools.audiusa.com, email vwaudi@snapon.com, or call 1-800-892-9650. Product information is subject to change without notice.
Multi-Function Support 9121.523
Easy to attach on the side of the bench, secured with a locking hook and wedge,
thesupportkitwillassistthetechnicianinvarioussituations:
• Holdingchainsfordownpulls
• Lockinganextraramforvectorpulls
Warranty: 24 Months
Manufactured by: Celette GmbH, Kehl
Supplied by: Snap-on Business Solutions 1-800-892-9650
Pulling Flange ATD.149
With this tool, the body repair work on and around the
suspension strut tower is made considerably easier.
Warranty: 24 Months
Manufactured by: Celette GmbH, Kehl
Supplied by: Snap-on Business Solutions 1-800-892-9650
Side Portal Gantry 9113.063
Used in conjunction with the side fixtures, the side portal allows the measuring and repair of
the A, B and C pillars. The door hinges and the locking pin mountings are the checkpoints.
Warranty: 24 Months
Manufactured by: Celette GmbH, Kehl
Supplied by: Snap-on Business Solutions 1-800-892-9650
P. 17 | AUDI AUTHORIZED COLLISION REPAIR TO O L C ATA LO g T O O L S A N D E Q U I P M E N T | P. 18
Pulling Straps, Set of 2 SN99.00
Made of resistant nylon material to resist damaging the parts of the vehicle.
Warranty: 24 Months
Manufactured by: Celette GmbH, Kehl
Supplied by: Snap-on Business Solutions 1-800-892-9650
Pulling Accessory ATD.165
Warranty: 24 Months
Manufactured by: Celette GmbH, Kehl
Supplied by: Snap-on Business Solutions 1-800-892-9650
Kit For Flange ATD.149 ATD.01.149
Warranty: 24 Months
Manufactured by: Celette GmbH, Kehl
Supplied by: Snap-on Business Solutions 1-800-892-9650
For additional product information or to place an order, visit us at www.tools.audiusa.com, email vwaudi@snapon.com, or call 1-800-892-9650. Product information is subject to change without notice.
Pulley Block ATD.01.801
Used in conjunction with chains, the pulley block will allow the technician
to perform down pulls.
Warranty: 24 Months
Manufactured by: Celette GmbH, Kehl
Supplied by: Snap-on Business Solutions 1-800-892-9650
Kit for Multiple Pulling CSK15.111
This package is the perfect tool to allow the technician to perform
secondary pulls.
Includes:
• (4)extensions(SK.2101,SK.2102,SK.2103,SK.2104)
• (2)connectors(SK.3107,SK.3109)
• (1)ram(VS10S.251)
Warranty: 24 Months
Manufactured by: Celette GmbH, Kehl
Supplied by: Snap-on Business Solutions 1-800-892-9650
Pulling Set CAT500
This set will cover the basic need for any technician to perform
appropriate pulls. The double hook allows chains to be shortened or
connected where needed.
Includes:
• (2)chains(CN.2410)
• (2)doublehooks(CR.210)
• (1)pullingplate(ATD.135)
• (3)clamps(ATD.1312,ATD.1343,ATD.1324)
Warranty: 24 Months
Manufactured by: Celette GmbH, Kehl
Supplied by: Snap-on Business Solutions 1-800-892-9650
P. 19 | AUDI AUTHORIZED COLLISION REPAIR TO O L C ATA LO g T O O L S A N D E Q U I P M E N T | P. 20
Professional Measuring and Alignment System VAS 6527
This equipment package is suitable for identifying and
repairing minor to severe structural damage to steel and
aluminum vehicles. Accessories are stored on portable
tool trolleys.
Features:
• Wirelessmeasuringsystemwithreal-timerepair
and documentation
• Universalsecuringsystemandweldingtemplate
• Hydraulicandairconnectionpointslocatedatthefront
and rear of the bench
• Framealignmentjigwithintegratedscissor-actionhoist
and 10-ton pulling device
• Portabletooltrolley
Includes:
• Quick42BasicBench,tilt-loading,withanintegratedliftandpowerunit,VAS6526/14
• RemovableRamps,whichcanalsobeusedasworkplatformwhenbenchisinthe“up”
position, VAS 6526/14-1
• 10-TonDrawAligner,whichcanbepositioned360°aroundthebench,operatedbya
remote control pendant, VAS 6526/15
• EVO1BasicAnchoringSystem,VAS6526/1
• EVO2ExtensionAnchoringSystem,VAS6526/2
• EVO3UniversalAnchoringSystem,VAS6526/3
• SpecialAudiAnchoringKitcoveringthemostpopularlate-modelAudivehicles,VAS6526/10
• Twohydraulicpillarjackswithconnectionhoses,VAS6526/4
• B61BenchParts,VAS6526/5
• Pullingchain(one)andChainShortener(one),VAS6526/18
• Q63QuickAnchoring,VAS6526/16
• PortableToolTrolleywithPerforatedToolMountingPanelandtoolmountingclips,VAS6526/1-1,
VAS 6526/6, and VAS 6526/8
• 11-pieceT10,T11PullKit,VAS6526/19
• PullClampAccessoryKit,VAS6526/20
• Internet-readyWirelessElectronicMeasuringsystem:includessoftwarewithself-helpfeatures
including vehicle clamping and fixturing instructions. Individual points are graphically displayed
with photographs and drawings. Initial 12-month data subscription included. VAS 6526/11
• HighMeasuringPointadapterforadditionalmeasuringflexibility.IncludedwithVAS6526/11
(available separately as CR1330000200)
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
For additional product information or to place an order, visit us at www.tools.audiusa.com, email vwaudi@snapon.com, or call 1-800-892-9650. Product information is subject to change without notice.
Professional Plus Measuring and Alignment System VAS 6528
This equipment package is suitable for identifying and
repairing minor to severe structural damage to steel and
aluminum vehicles. Accessories are stored on a sectional
wall-mounted tool board.
Features:
• Wirelessmeasuringsystemwithreal-timerepair
and documentation
• Universalsecuringsystemandweldingtemplate
• Hydraulicandairconnectionpointslocatedatthe
front and rear of the bench
• Framealignmentjigwithintegratedscissor-action
hoist and 10-ton pulling device
• Space-savingwall-mountedtoolboardforconvenient
tool identification and storage
Includes:
• Quick42BasicBench,tilt-loading,withanintegratedliftandpowerunit,VAS6526/14
• RemovableRamps,whichcanalsobeusedasworkplatformwhenbenchisinthe“up”
position, VAS 6526/14-1
• 10-TonDrawAligner,whichcanbepositioned360°aroundthebench,operatedbyaremote
control pendant, VAS 6526/15
• EVO1BasicAnchoringSystem,VAS6526/1
• EVO2ExtensionAnchoringSystem,VAS6526/2
• EVO3UniversalAnchoringSystem,VAS6526/3
• SpecialAudiAnchoringKitcoveringthemostpopularlate-modelAudivehicles,VAS6526/10
• Twohydraulicpillarjackswithconnectionhoses,VAS6526/4
• B61BenchParts,VAS6526/5
• Pullingchain(one)andChainShortener(one),VAS6526/18
• Q63QuickAnchoring,VAS6526/16
• Wall-mountedtoolboardpackage,VAS6526/9
• 11-pieceT10,T11PullKit,VAS6526/19
• PullClampAccessoryKit,VAS6526/20
• Internet-readyWirelessElectronicMeasuringsystem:includessoftwarewithself-helpfeatures
including vehicle clamping and fixturing instructions. Individual points are graphically displayed
with photographs and drawings. Initial 12-month data subscription included. VAS 6526/11
• HighMeasuringPointadapterforadditionalmeasuringflexibility.IncludedwithVAS6526/11
(available separately as CR1330000200)
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
P. 21 | AUDI AUTHORIZED COLLISION REPAIR TO O L C ATA LO g T O O L S A N D E Q U I P M E N T | P. 22
EVO1 Basic Anchor System VAS 6526/1
This set serves as an additional means of anchoring and
counterholding where the body has structural damage. Universal
parts set made up of various height-adjustable towers and brackets
for extra securing of frame points and reshaping work.
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
EVO1 Basic Anchor System, Tool Trolley VAS 6526/1-1
This tool trolley serves as a means of storing the EVO1 Basic Anchor System VAS 6526/1.
This tool trolley comes with two EVO1 perforated panels and two empty perforated panels
for Basic Anchor System storage.
Specifications:
• Width:900mm
• Height:1570mm
• Depth:600mm
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
EVO2 Extended Anchor System VAS 6526/2
This set serves as an additional means of anchoring and
counterholding where the vehicle has structural damage.
Universal parts set made up of various height-adjustable
towers and brackets for extra securing of frame points and
reshaping work.
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
Tools not included.
For additional product information or to place an order, visit us at www.tools.audiusa.com, email vwaudi@snapon.com, or call 1-800-892-9650. Product information is subject to change without notice.
EVO3 Universal Anchor System VAS 6526/3
This universal welding template serves in conjunction with measuring unit
VAS 626/11 as a means of fixing new parts (welding in new metal panels)
on all Group vehicles. Universal bracket set based on VAS 6526/1. The
brackets are assembled individually, corresponding with the type of vehicle,
as fixing brackets for new part replacement on the alignment jig with the
aid of electronic measuring unit VAS 6526/11.
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
Hydraulic Jack Kit VAS 6526/4
The use of this jack allows the vehicle to be raised and anchored on
the alignment jig.
Specifications:
• Liftheight:300mm
• Loadbearingpercylinder:1ton
• Lengthofconnectionleads:3000mm
Includes:
• (2)Hydraulicjackswithconnectionleads
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
P. 23 | AUDI AUTHORIZED COLLISION REPAIR TO O L C ATA LO g T O O L S A N D E Q U I P M E N T | P. 24
Anchor Set VAS 6526/5
This anchor set serves as a means of anchoring the vehicle on the
alignment jig during structural damage repair. Four rigid clamp carriers
with attached clamps form the basic anchor points for a vehicle on the
alignment jig.
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
Tool Trolley, Basic VAS 6526/6
The basic tool trolley serves as a means of storing accessories. This tool trolley comes
without panels for individual storage with empty perforated panels or set-specific panels.
Specifications:
• Width:900mm
• Height:1570mm
• Depth:600mm
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
Tool Trolley, Basic Plus VAS 6526/7
This tool trolley serves as a means for storing accessories. This tool trolley comes with four
empty perforated panels.
Specifications:
• Width:900mm
• Height:1570mm
• Depth:600mm
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
For additional product information or to place an order, visit us at www.tools.audiusa.com, email vwaudi@snapon.com, or call 1-800-892-9650. Product information is subject to change without notice.
Tools Panel VAS 6526/8
The perforated sheet metal tool panel serves to store accessories on the tool
trolley, VAS 6526/6. This panel is also suitable for wall assembly.
Specifications:
• Width:900mm
• Height:600mm
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
Wall System VAS 6526/9
The wall system serves as a functional means of storage and work preparation. If
required, it can also be assembled away from the wall and used as a workspace.
Perforated tool panels VAS 6526/8 can be used on the opposite side to store tools.
Specifications:
• Width:3600mm
• Height:3000mm
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
Clamp Set, Special VAS 6526/10
This special clamp set serves as a means of anchoring on the alignment
jig vehicles that cannot or must not be anchored at the sill panel using
standard clamps.
Includes:
• (4)Basiccarriers • (4)Holeclamps
• (2)Risers • (3)Adapterplatesets
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
Tools not included.
P. 25 | AUDI AUTHORIZED COLLISION REPAIR TO O L C ATA LO g T O O L S A N D E Q U I P M E N T | P. 26
Measuring Unit, Professional VAS 6526/11
This system is a wireless measuring unit for accident damage diagnosis
and is used as a real-time measuring system during repairs. It can be
used on all common alignment systems and two pillar hoists. Complete
vehicle geometry measurement on the upper and underbody is possible
in one work step.
A measuring cradle runs on a rail under the vehicle and transmits the
recorded 3D measured values by Bluetooth® to the computer in real
time. The computer displays the measurement results graphically with a
software program.
The advantages of the Professional Measuring Unit over
the Basic Measuring Unit VAS 6526/12 are as follows:
• Internet-ready(automaticsoftwarestatusdetection)
• Softwarecanbecontrolledfrommeasuringarm
• VINcoderequest(avehiclecantherebybeselectedviathevehicleidentificationnumber)
• ClampandEVOassemblyinstructionsareshownonscreen
• Point-to-pointmeasurementpossiblewithspecifiedvalues
• Axlegeometrycontrolmeasurement(classictrackadjustmentisnotpossible)
• Surfacemeasurement(calculationaidforrepairdecision)
Specifications:
• Powersupply–input:AC100-240V,800mA50-60Hz,output:DC15V2.2mA
• Screenresolution:+/-0.5mm
• Workingarea:4720/5720mmLx2120mmWx1985mmH
• Rechargeablebattery,batterypower6–8hours,chargingtime2–3hours(80%),6hours(100%)
• Weightofmeasuringcradle:18kg
• Datatransfer:Bluetooth,softwareactuation
System Prerequisites (computer not included):
Intel® Pentium® 4 (2.4GHz processor), Intel CoreTM Duo processor or higher, AMD XP 2500+ or higher AMD processor,
1 GB RAM memory, 10 GB free memory or more, 1024x768 monitor resolution, 32-bit video card, Microsoft® mouse
or compatible, loudspeaker, USB interface, DVD-ROM drive, Internet access (optional).
Operating system:
Microsoft Windows® XP Professional or Microsoft Vista® Premium, Business, Ultimate or Enterprise.
Length of measuring rail:
4m
Includes:
Measuring unit includes test adapter and body measuring tool, storage trolley, rail and 12-month data license.
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650For additional product information or to place an order, visit us at www.tools.audiusa.com, email vwaudi@snapon.com, or call 1-800-892-9650. Product information is subject to change without notice.
Measuring Unit, Basic VAS 6526/12
The system is a wireless measuring unit for accident damage
diagnosis and is used as a real-time measuring system during
repairs. It can be used on all common alignment systems and
two pillar hoists. Complete vehicle geometry measurement on
the upper and underbody is possible in one work step.
A measuring cradle runs on a rail under the vehicle and transmits
the recorded 3D measured values by Bluetooth® to the computer
in real time. The computer displays the measurement results
graphically with a software program.
Specifications:
• Powersupply–input:AC100-240V,800mA50-60Hz;output:DC15V2.2mA
• Screenresolution:+/-0.5mm
• Workingarea:4720/5720mmLx2120mmWx1985mmH
• Rechargeablebattery,batterypower6–8hours,chargingtime2–3hours(80%),6hours(100%)
• Weightofmeasuringcradle:18kg
• Datatransfer:Bluetooth,softwareactuation
System Prerequisites (computer not included):
Intel® Pentium® 4 (2.4GHz processor), Intel CoreTM Duo processor or higher, AMD XP 2500+ or higher AMD processor,
1 GB RAM memory, 10 GB free memory or more, 1024x768 monitor resolution, 32-bit video card, Microsoft® mouse
or compatible, loudspeaker, USB interface, DVD-ROM drive, Internet access (optional).
Operating system:
Microsoft Windows® XP Professional or Microsoft Vista® Premium, Business, Ultimate or Enterprise.
Length of measuring rail:
4m
Includes:
Measuring unit includes test adapter and body measuring tool, storage trolley, rail and 12-month data license.
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
P. 27 | AUDI AUTHORIZED COLLISION REPAIR TO O L C ATA LO g T O O L S A N D E Q U I P M E N T | P. 28
Software Upgrade VAS 6526/13
With this software upgrade, the enhanced features available on the
Professional Measuring System VAS 6526/11 are added to the Basic
Measuring System VAS 6526/12.
Specifications:
• Intel Pentium4(2.4GHzprocessor) • Loudspeaker
• IntelCoreDuoprocessororhigher • USBinterface
• AMDXP2500+orhigherAMDprocessor • DVD-ROMdrive
• 1GBRAMmemory • Internetaccessoptional
• 10GBfreememoryormore • Operatingsystem:MicrosoftWindowsXPProfessionalor
• 1024x768monitorresolution32-bitvideocard MicrosoftVistaPremium,Business,UltimateorEnterprise
Includes:
•1CDand1CDKey
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
Basic Bench, 4.20m VAS 6526/14
The VAS 6526/14 Quick 42 Bench, tilt loading with integrated
lift and power unit, is required for repairing accident damage
on vehicles.
The VAS 6526/14 Basic Bench is used in conjunction with the
ramp set and working platform VAS 6526/14-1 for the repair
of minor to severe structural damage. Compressed air and
hydraulic connection points are conveniently integrated in the
front and rear of the bench.
Specifications:
• 4200mmLx1110mmW
• Widthatramp:min.1000mm;max.1915mm • Lengthwithrampset:5480mm
• Liftheight:1480mm • Dimensionsofscissorbase:780x2200mm
• Loadbearing:3000kg • Weight:755kg(1661lbs.)
• Lifttime:1phase110V/60seconds • Powersupply:1phase110V30A
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
For additional product information or to place an order, visit us at www.tools.audiusa.com, email vwaudi@snapon.com, or call 1-800-892-9650. Product information is subject to change without notice.
10-Ton Alignment Unit VAS 6526/15
With the alignment unit with pressure cylinder, vehicle deformation can be rectified
with forces of up to 10 tons. Operates via remote control. 360˚ use on alignment jig.
Specifications:
• Pullingforce:10tons(at300baroilpressure)
• Length:1380mm
• Width:480mm
• Height:1580mm
• Weight:150kg(330lbs.)
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
Ramp Set VAS 6526/14-1
The aluminum access ramp set is required for alignment jig
VAS 6526/14. It is adjustable in track width with 3 settings and
also serves as an aid, e.g., when working on the vehicle roof.
Steel support arms are hooked into the alignment jig. The aluminum
elements are adjustable in width. They can therefore be extended as a
climbing aid.
Specifications:
• Length:5480mm
• Width-min:1000mm
• Width-max:1910mm
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
P. 29 | AUDI AUTHORIZED COLLISION REPAIR TO O L C ATA LO g T O O L S A N D E Q U I P M E N T | P. 30
Quick Anchoring Set VAS 6526/16
This 6-piece height-adjustable anchor set is required for securing the vehicle
on the alignment jig. It is suitable for rectifying minor accident damage.
Clamp carriers are positioned from underneath at the sill fold and are used
to anchor the vehicle while it is still situated with its wheels on the ramps.
Includes:
• (2)Height-adjustableclampcarriersplusattachments
Warranty: 24 Months
Manufacturedby:Car-O-Liner,Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
Clamp Set VAS 6526/17
Clamps are required in conjunction with anchorage set
VAS 6526/16 for securing the vehicle on the alignment jig.
4 required.
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
For additional product information or to place an order, visit us at www.tools.audiusa.com, email vwaudi@snapon.com, or call 1-800-892-9650. Product information is subject to change without notice.
Pull Bar Set VAS 6526/19
The pull bar set is required for pulling different body areas.
Specifications:
• Pullingforce:10tons
Includes:
• (1)PullBarSet
• (1)DomedPullBarSet
• (1)RelayPulley
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
Pull Chain Set VAS 6526/18
The pull chain set is required for transferring power during pulling
measures to rectify structural damage.
Specifications:
• Chainlength:2.5m
• Pullingforce:10tons
Includes:
• (1)PullChain
• (1)ChainShortener
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
P. 31 | AUDI AUTHORIZED COLLISION REPAIR TO O L C ATA LO g T O O L S A N D E Q U I P M E N T | P. 32
Pull Clamp Set VAS 6526/20
The pull clamp set is required for reshaping structural damage
on vehicles.
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
Winch VAS 6526/21
The winch can be used to pull vehicles that cannot be driven onto the alignment jig.
Hand-operated.
Warranty: 24 Months
Manufactured by: Car-O-Liner, Sweden
Supplied by: Snap-on Business Solutions 1-800-892-9650
Welding Unit VAg 1959A
Digital MAg inverter welding unit
• Designedforvehicleswithsteelbodies
• Synergyprogramforsteel
• Optimizedcyclecontrolforweldingprocess
Design and features:
• FullydigitalMAGinverterpowersource
• Digitaldisplaywithone-buttoncontrol
• Micropowerdistributorwithmemoryforsynergyprograms
• Air-cooled
• Protectionrating:IP23
Specifications:
• Mainssupply3x400V+/-15%,50/60Hz
• Fuseprotection:10A
• Currentrange10–270A
• One-buttoncontrol
• 4rolldrive
• Wirefeed:1–16m/min.
• Wirefeedunit
• Wireinsertionwithoutgasandelectricity
• Automaticfreeburnerfunction,synergyoperation
Includes:
• (1)weldingunitwithwirefeed(4rolldrive)
• (1)trolleywithgasbottleholder
• (1)weldingtorchwith3mhosepackageforsteelø0.8mmwire
• (1)earthlead
• (1)pressurelimiterAr/CO²;standard3–30l/min.
Country-specific version
ASE41211201023V.A.G1959AWeldingunit–USA
Warranty: 24 months
Manufacturer: Migatronic Schweissmaschinen GmbH
For additional product information or to place an order, visit us at www.tools.audiusa.com, email vwaudi@snapon.com, or call 1-800-892-9650. Product information is subject to change without notice.
P. 33 | AUDI AUTHORIZED COLLISION REPAIR TO O L C ATA LO g T O O L S A N D E Q U I P M E N T | P. 34 T O O L S A N D E Q U I P M E N T | P. 34
Welding and Brazing System VAS 6741
• Easyoperationthankstopre-selectionofsheetmetalthickness
• Finecontrolofenergyandarc
• Storageofindividualweldingprograms
• Softwareupdatesavailableatanytime
• 4rollerdriveforlongperiodsofoperation
• Simpleweldingwirereplacement
• Mountingforsmallbasketspoolsandbasketspoolsupto17kg
• Automaticdetectionoftorchpackageandstorageofrespectivetorchpackageparameters
• Shortsetuptimes
Note:
MIG brazing is only permitted by the brand Volkswagen!
Design and features:
• MobilepulseMIG/MAGweldinginverter/shieldedarcweldingunit
Specifications:
• Voltage400V(220) • Frequency50/60Hz
• Idlingvoltage59V • Weldingcurrent7.9A
• 3-phasepowerwithdelayedmainsprotection • Typeofprotection23IP
• Torchcooling:Air–air • Torchconnection:Quick-actingconnection
• Wiredrive:Roller
Includes:
• (1)controlunit3x400V(or220Vasanoption)onwheelswithhandle
• (1)SG2Tiø0.8mmweldingwire5kg
• (1)CuSi3ø0.8mmweldingwire5kg
• (2)setsofDVrollersforsteel0.8/1.0mm
• (1)steelhosepackageMB15,3mwithsteelcoreø0.8mmwithbluehandle
• (1)hosepackageMB15.3mwithplasticcoreø0.8mmwithredhandle
• (1)earthlead
• (1)pressuregauge
• (1)doublesplittervalve
• (1)setofoperatinginstructions
Country-specific version:
200volt,–USA–ASE43710000023
Country-specific version:
ASE43710000023 200 V (USA) VAS 6741 Welding and brazing system
MIG/MAG–200V
Warranty: 24 months
Manufacturer: Wieländer & Schill KG
Welding and Brazing System VAS 6388A
Fully digitized welding and brazing system
• Designedforvehicleswithsteelandaluminumbodies
• Easyandconvenientoperation
• Optimizedcontrolforentireweldingandbrazingprocess
• Steelmodeselectedbychangingdriverollersandhosepack
(see recommended accessories)
Note:
MIG brazing is only permitted by the brand Volkswagen!
Design and features:
• FullydigitizedMIG/MAGinverterpowersource
• Digitaldisplay
Specifications:
• Mainssupply:380/400V(alsoavailableas
3x200V/230V/460V unit as an option)
• Weldingcurrentmax:270A
• 4rollerdrive
• Functionkeys
• Earthconnectionmonitoring
• Gastestfunction
• Synergyoperation
• Manual/spotweldingmode
Includes:
• (1)weldingdevicewithintegratedwirefeed(4rolleroperation)
• (1)trolleywithgasbottleholder
• (1)weldingtorchAL2300completewith3.5mhosepackforALU/MIGbrazing(1.0mm)
• (1)earthcable
• (1)pressurelimiterAr/CO²standard3–30l/min
Recommended accessories:
• Feedrollers0.8mm(steel)VAS6388A-1;ASE43709000000
• RangeforweldingandbrazingsystemVAS6388A-2;ASE43709100000
• WeldingtorchVAS6388A-3;ASE43709200000
Warranty: 24 months
Manufacturer: FAN Austria
For additional product information or to place an order, visit us at www.tools.audiusa.com, email vwaudi@snapon.com, or call 1-800-892-9650. Product information is subject to change without notice.
• Fuseprotection:16A
• Weldingcurrentmin:3A
• Basketreeladapter
• Wirefeedwithoutgasorpower
• Automaticfreeburn
• Jobmode(storesuser-definedsettings)
• 2-cycleoperation,4-cycleoperation
• ALU/MIG/MAGweldingandbrazing
The Audi Authorized Collision Repair Facility Program is designed
to maintain the innovative engineering technologies built into each
award-winning vehicle.
To meet Audi exacting standards of excellence requires specialized
training tools and equipment.
Only collision repair facilities that meet our exacting requirements
receive authorization to become Audi Authorized Collision Repair
Facility centers.
Audi of America, Inc. believes the information in this document to be correct as of November 2013. However, all information is subject to change. Please contact your Audi of America representative with questions.© 2013 Audi of America, Inc. “Audi,” “quattro,” “Singleframe” and the Singleframe grille design, the four rings logo and all model names are registered trademarks of AUDI AG. The BLUETOOTH word mark and logos are owned by the Bluetooth SIG, Inc., and use of any such marks by AUDI AG is under license. Intel, Pentium and Core are trademarks of Intel Corporation in the U.S. and other countries. Microsoft, Windows and Vista are registered trademarks of Microsoft Corporation. All other trademarks are the property of their respective owners. Printed in the U.S.A. BR-13-672-US Rev. 11/13
top related