adv-4—frac site dust mitigation system patented

CORPORATE OFFICE5800 E. Skelly Drive Suite 300 | Tulsa, Oklahoma 74135

CONTACT AIRIS918.728.7026 | info@airiswellsite.com | www.airiswellsite.com

A D V- 4 — F R A C S I T E D U S T M I T I G AT I O N S Y S T E MPAT E N T E D F R A C S I T E D U S T VA C U U M S Y S T E M

P A S S I O N A T E A B O U T P R O T E C T I N G A N D I M P R O V I N G T H E W E L L S I T E .

t Easy access 60 filter, vertical top loading cartridge design

t Filtering capacity of 45,000 CFM @ 14” Wg

t Belt drive with Twin Disc PTO

t 17,160 sq. ft. of QX primary filter media

t BI-365 Fan non-overloading, spark resistant

t Fifth Wheel Attachment

t Filter efficiency of 99.8% at .5 micron

t (7) 20” Inlet duct ports (2 on each side, 2 in dove tail, 1 rear)

t Air to cloth ratio of 2.62:1

t Fully enclosed secure engine compartment

t 120 gallon fuel capacity

t Optional filter media available

t DOT approved trailer lighting and reflective recognition tape

t Hydraulically driven unloading augers with reverse

t Dimensions = 12’ 2” tall x 8’ 5” wide x 46’ long (in transit)

t (3) 8000 lbs. Torsion axles with air brakes

t 250 CFM after cooler

t Dry weight = 26, 600 lbs

t Solid state, programmable timer board for reverse air pulse filter cleaning system (with separate portable 185cfm diesel driven air compressor)

t Specialized valve system within custom manifolds and hardware for all 6 areas of equipment generated dust on hydraulic fracturing sites

t Heated hopper

t John Deere 6068T, Tier 3 Compliant (Electric Motor Options available)

t Interior and Exterior lighting for safety

t Hydraulic stabilization jacks for safety