adv-4—frac site dust mitigation system patented
TRANSCRIPT
CORPORATE OFFICE5800 E. Skelly Drive Suite 300 | Tulsa, Oklahoma 74135
CONTACT AIRIS918.728.7026 | [email protected] | www.airiswellsite.com
A D V- 4 — F R A C S I T E D U S T M I T I G AT I O N S Y S T E MPAT E N T E D F R A C S I T E D U S T VA C U U M S Y S T E M
P A S S I O N A T E A B O U T P R O T E C T I N G A N D I M P R O V I N G T H E W E L L S I T E .
t Easy access 60 filter, vertical top loading cartridge design
t Filtering capacity of 45,000 CFM @ 14” Wg
t Belt drive with Twin Disc PTO
t 17,160 sq. ft. of QX primary filter media
t BI-365 Fan non-overloading, spark resistant
t Fifth Wheel Attachment
t Filter efficiency of 99.8% at .5 micron
t (7) 20” Inlet duct ports (2 on each side, 2 in dove tail, 1 rear)
t Air to cloth ratio of 2.62:1
t Fully enclosed secure engine compartment
t 120 gallon fuel capacity
t Optional filter media available
t DOT approved trailer lighting and reflective recognition tape
t Hydraulically driven unloading augers with reverse
t Dimensions = 12’ 2” tall x 8’ 5” wide x 46’ long (in transit)
t (3) 8000 lbs. Torsion axles with air brakes
t 250 CFM after cooler
t Dry weight = 26, 600 lbs
t Solid state, programmable timer board for reverse air pulse filter cleaning system (with separate portable 185cfm diesel driven air compressor)
t Specialized valve system within custom manifolds and hardware for all 6 areas of equipment generated dust on hydraulic fracturing sites
t Heated hopper
t John Deere 6068T, Tier 3 Compliant (Electric Motor Options available)
t Interior and Exterior lighting for safety
t Hydraulic stabilization jacks for safety