aabo company presentation eng
Post on 07-Apr-2016
225 Views
Preview:
DESCRIPTION
TRANSCRIPT
• Company name: ”E. Aabo Andersen A/S”
• Brand name: ”Aabo”
• Ownership : Family owned company - Aabo Andersen
1980: Company founded by Mr. Erling Aabo Andersen
2005: Grand opening of new factory in Svendborg, Denmark
2008: Mr. Claus Aabo Andersen takes over the company
• Product range: Equipment and TurnKey supply of finishing plants
for powder and wet painting Worldwide
• Head quarter and production location: Denmark
• Certificates : TÜV Nord
Certificate of Conformity
• Powder coating plants
• Liquid coating plants
• Pre-treatment lines
• Drying- and curing ovens
• Powder and liquid coating booth systems
• Conveyor systems
• Water treatment plants
• Control panels
• Cooling- and flash-off zones
• Plant service facilities
• Special products
• Service and Aftersales
• Manual conveyor systems
• Semi-automatic conveyor systems
• ”Overhead” conveyor systems
• ”Power and Free” conveyor systems
• Lift systems for dip solutions
• Band or roller transportation systems
• Floor transportation systems
• Water cooled conveyor systems
• We deliver all types of pretreatment: Tunnel-, Dip-, Chamber- and
Cleaning room solutions.
• All in-side equipment components, are done in standard or acid proof
stainless steel, fitted and double-cross checked for each individual
chemicals and pre-treatment solution required.
• All tunnels, chambers and containers are fully welded, and the core is
insulated with up to 70 mm insulation to avoid heat loss and outside water
condensation.
• All lines are designed for maximum efficiency, looking at parts and process
descriptions, and can be delivered from 1 – 15> steps or more, on
customer’s demand.
• Powder- or liquid cure ovens
• Water drying ovens
• Temperature range from 50 to 550oc
• Heating resources: Electrical, LPG or Natural gas, Oil
• Direct or in-direct heating systems
• Types: box-, dip, tunnel or side transportation ovens
• Module-build using insulation between 50 to 300 mm
• Customized designs
• Ovens types: Convection
Infrared - based on electricity or gas catalytic principle
Combination of infrared / convection
• We can design and produce, steel booth systems, for automatic and / or manual
powder application jobs. However, we do prefer to cooperate with the known
application equipment suppliers available on the market.
In that way our customers can choose their preferred equipment supplier.
• We design and produce special ”Walk in” powder application booth systems,
suitable for difficult jobs.
• We design and produce booth systems for liquid application, and / or cooperate
with the known suppliers on the market.
• We do not design or produce application equipment, for powder and liquid
application, but we cooperate with the known application equipment suppliers
available on the market.
In that way our customers can choose their preferred equipment supplier.
At ”Aabo” we have created our own environment demands for us to live by -
we call it ”the green line”.
Because of ”the green line”, we can also offer solutions for ”WTP”
(Water Treatment Plant):
• Fresh water treatment systems
• Sludge collection systems
• Sludge draining systems
• Reactor systems
• Vacuum evaporating plants
In combination with some paint jobs, a special solution for cooling or flash-off zone
is needed, before the products are send further through the process or taken off for
handling.
For these process-situations we are making special solutions for each specific
product or process. Typically, we are building these zones with our insolated
sandwich constructions.
• Conventional control panels
• Conventional control panels with system visualizing of the whole plant
• PLC control panels
• PC control:
• PC screen - easy to operate through structured software modules and
visualizing of process
• Automatic service register and alarm
• Process and failure register
• Integrated modem for long distance control and monitoring
• Free communication with ”SCADA” master control systems
• Option for ”Text message” communication module
• Option for ”R-FID” handling
Since “Aabo” is taking the responsibility of total ”TurnKey” plant delivery,
we are also able to supply Plant Service Facilities such as:
• Air Exhaust ventilation systems
• Air Intake ventilation systems
• Air Heat systems
• Air Heat exchanger systems
• ”A/C” equipment
• Production offices
• Lab. rooms
• Climate rooms
• Storage rooms
• Internal light walls
• Compressor installation
• Compressor room
• Hot water boiler systems
• Humidity systems
• Etc.
• We develop, project, produce, deliver and install all process components for
use in complete powder- and liquid paint plants.
• We specially design all the equipment solutions and components
accordingly to each customer’s specifications and needs.
• We deliver ”TurnKey” solutions World Wide and all our plant solutions can
be supplied as Manual, Semi-automatic or Full automatic solutions.
We develop, produce, distribute and deliver a long range of special products, but
we also join development projects together with our customers, creating special
equipment or process solutions for specific or specialized products and plant
demands.
Examples:
• ”KTL” systems (cata-, ana- or electro-phoresis)
• Automatic or manual shot blasting plants
• High temperature ovens
• Liquid paint preparation rooms
• NDT Rooms (Non Destructive Test)
• Operator mobile lifts or stationary platforms
• Oil separation systems for pre-treatments lines
• Flat-line ovens
• Mobile acid cleaning devices for chemical cleaning of heat exchangers
• Filtration systems
• Etc.
At “Aabo” we put our customers in the center, therefore it is not alone important
for us to be able to design and deliver the right plant solution, but it is also very
important for us to be able to support the customers after the plant installation.
“Aabo” has therefore always focus on continuous education of our service
Engineers and Technical staff, in order to ensure the highest level of professional
support - also after the new Aabo paint plant has been supplied.
We can therefore offer:
• Service contracts
• On site - Rapid and effective service
• Professional technical service back up
• Professional guiding for optimization of the productivity of the paint plant
• Plant and process technical training schools
• Etc.
E. Aabo Andersen A/S
Finlandsvej 6
DK-5700 Svendborg
Denmark
+45 62 22 00 11
www.aabo.dk
top related