a fresh outlook on flexible · pdf filea fresh outlook on flexible packaging smart choices...
Post on 11-Mar-2018
221 Views
Preview:
TRANSCRIPT
A Fresh Outlook onFlexible PACKAGING
Smart choices for a wide variety
of today’s products.Flexible packaging is
reusable, portable and maintains freshness, while
being more sustainable by reducing space
and weight.
Product PORTFOLIO
glue applied
glue applied
glue applied
1.7
1.8
1.9
peelable seal to PP, PE
peelable seal to PP, PE
various levels of peel to lock seal, seals to PET, APET, CPET
peelable seal to PP, PE
peelable seal to PP, PE
peelable seal to PP, PE
lap seal
lap seal
2.0
2.0
fin & lap seal grades available
fin & lap seal grades available
1.8
1.2
fin seal
fin seal or pre-made pouch
fin seal or pre-made pouch
fin seal or pre-made pouch
lock seal to PP, PE, EVOH
fin seal
fin seal
2.0
4.2
4.2
4.5
3.5
2.9
1.8
70 ga OPP / 100 ga OPP
70 ga OPP / 110 ga white OPP
70 ga OPP / 120 ga met OPP
Roll-Fed Label
48 ga PET / 150 ga LLDPE
54 ga PVDC ctd PET / 150 ga LLDPE
100 ga Mylar
48 ga PET / 150 ga wLLDPE
48 ga PET / 150 ga wHDPE/EVOH
48 ga metPET / 150 ga LLDPE
Clear, Non-Barrier
Clear, Barrier
Clear, Barrier
White, Non-Barrier
White, Barrier
Metalized
2.0
2.0
1.0
2.0
2.0
2.0
50µ PETG
50µ PVC
Shrink Sleeve
Shrink Sleeve
180 ga white BOPP (cavitated)
120 ga BOPP
Frozen Novelties
48 ga metPET / 150 LLDPE
48 ga PET / (70 ga OPP/.000285 foil/3 mil mLLDPE)
48 ga PET / (70 ga OPP/.000285 foil/3 mil mLLDPE)
48 ga PET / 48 ga metPET / 350 ga LLDPE
48 ga PET / 48 ga metPET / 250 ga coex
76 ga cello / (115 ga OPS/7# wLDPE/.000275 foil/16# Ionomer)
48 ga PET / 10# wLDPE / Foil / 18# Surlyn® COEX
Frac Pack
Vacuum Pack
Valve Bag
Single Serve Lidding
Stick Pack
BEVERAGE
COFFEE
DAIRY
SHRINKSLEEVE
LIDDING
MARKET APPLICATION MATERIAL STRUCTURE CALIPER(mils)
SEALING
920.722.2333 www.outlookgroup.com
Product PORTFOLIO
lap seal
peelable seal to PP, PE
peelable seal to PP, PE
various levels of peel to lock seal, seals to PET, APET, CPET
peelable seal to PP, PE
peelable seal to PP, PE
peelable seal to PP, PE
fin seal or pre-made pouch
fin seal or pre-made pouch
fin seal or pre-made pouch
fin seal or pre-made pouch, lock seal
fin seal or pre-made pouch
fin & lap seal grades available
fin & lap seal grades available
fin & lap seal grades available
fin & lap seal grades available
fin & lap seal grades available
3.5
3.5
3.5
2.0
3.5
0.8
2.0
1.7
1.9
2.0
fin & lap seal grades available
fin & lap seal grades available
fin or lap seal
fin or lap seal
fin or lap seal
fin or lap seal
2.5
3.5
4.0
5.0
fin seal or pre-made pouch
fin seal or pre-made pouch
fin seal or pre-made pouch
fin seal or pre-made pouch
3.5
4.0
4.0
3.5
48 ga PET / EVOH-nylon-EVOH coexChub Film
100 ga nylon / 300 ga EVOH
54 ga PVDC PET / 300 ga LLDPE
48 ga metPET / 300 ga LLDPE
48 ga PET / 48 ga metPET / 100 ga CPP
48 ga matte PET / 80 ga metOPP / 200 ga coex
80 ga OPP
54 ga PVDC PET / 140 ga OPP
170 ga white OPP
70 ga OPP / 120 ga met OPP
80 ga matte OPP / 120 ga metOPP
Jerky
Seed, Nuts & Granola
Popcorn
Suckers
Candy Bar/Snack Bar
125 ga LLDPE / 125 ga LLDPE
175 ga LLDPE / 175 ga LLDPE
200 ga LLDPE / 200 ga LLDPE
250 ga LLDPE / 250 ga LLDPE
<5# Bag
5# Bag
10# Bag
20# Bag
48 ga PET / 300 ga LLDPE
54 ga PVDC PET / 350 ga LLDPE
48 ga PET / 350 ga white EVOH
48 ga metPET / 300 ga LLDPE
Clear, Non-Barrier
Clear, Barrier
White, Barrier
Metalized
MEAT
PETFOOD
RICEFILM
SNACKS
MARKET APPLICATION MATERIAL STRUCTURE CALIPER(mils)
SEALING
Project CHECKLIST
PRODUCT
Beverage Cosmetic Food Health Care Personal Care Pet Food Other
Equipment Style: VFFS HFFS Pre-Made Pouches
Equipment Mfr/Model
Number Colors: Process PMS Colors
Impression Size
Pouch Size
Eye Mark Position (indicate on art)
POUCH STYLES
BACK SEAL STYLES
FEATURES
Tear Notch Hang Hole Zipper Wicket Other
Wet or Dry
Is Sample Available?
• Side Gusset• Handle (optional)
Standard Lap-Left Over Right-Centered Face
Reverse Lap-Right Over Left-Centered Face
Standard Fin-Left Over Right-Fin Centered on Back-Off Center Face
Reverse Fin-Right Over Left-Fin Centered on Back-Off Center Face
Standard Off-Set Fin-Left Over Right-Fin Off Center on Back-Centered Face
Reverse Off-Set Fin-Right Over Left-Fin Off Center on Back-Centered Face
Pinch Seal-Centered Face
• Stand-up
• Bottom Gusset• Sombraro (optional)
• Stand-up• Recloseable• Tear Notch
• Bottom Gusset• Bottom Wickets• Recloseable• Tear Notch
• Stand-up• Recloseable• Exposed Slider
• Bottom Gusset• Top Wickets
• Stand-up• Recloseable• Hooded Slider
• 3 Sided Sealed
• 3 Sided Sealed• Recloseable• Exposed Slider
• 3 Sided Sealed• Recloseable• Tear Notch
• 3 Sided Sealed• Recloseable• Hooded Slider
• with Header• Recloseable• Tear Notch• Handle (optional)
PACKAGE STYLE
ART LAYOUT
• Shaped Bag with Header• Handle (optional)
Roll outer dimension (or) Feet per roll
Core Size: Standard (3" ID x 5/8" wall) Other (explain)
Pallet: Standard (40" x 48" “eye-to-the-sky”) Other (explain)
Splice: Standard (2" red tape, butt splice) Other (explain)
Requested Quote Quantities:
Order Pattern: Weekly Monthly Quarterly Other (explain)
Pricing Units: Mimp MSI MLF LBS Rolls Other (explain)
920.722.2333 www.outlookgroup.com
Project CHECKLIST
Does your application require clear, white or metalized face? Clear White Metalized
Material Structure:
Is your Package Surface Printed Reverse Printed
If surface printed, do you require Matte Coating Gloss Coating None
Position 1Wound OutTop of copy dispenses first
Position 2Wound OutBottom of copy dispenses first
Position 3Wound OutRight of copy dispenses first
Position 4Wound OutLeft of copy dispenses first
Position 5Wound InTop of copy dispenses first
Position 6 Wound InBottom of copy dispenses first
Position 7 Wound InRight of copy dispenses first
Position 8Wound InLeft of copy dispenses first
Rewind Position:
MATERIALS
FINISHING SPECS
QUANTITIES
Properties Polyester (PET) Polyethylene (PE) Polypropylene (PP) Polystyrene (PS) Polyvinyl Chloride Ethyl Vinyl (PVC) Alcohol (EVOH)
Tear Resistance No Stretch, Stretches, Stretches, Does No Stretch, Stretches, Does Strecthes, No Tear No Tear Not Tear Easily Tears Easily Not Tear Easily No Tear
Strength High Low High Low High Low
High Temp Stability Excellent Poor High Poor Poor Poor
Durability Maximum Low Good Fair Excellent Low
Clarity/Opacity Excellent Poor Good Fair Good Fair
Printability Excellent Fair Good Fair Good Fair
Chemical Resistance Excellent Excellent Excellent Poor Excellent Excellent
Moisture Barrier Fair Fair Good Fair Fair Excellent
Oxygen Barrier Fair Poor Poor Poor Fair Excellent
Convertability Excellent Fair Good Fair Good Good
Odor None None None None Possible None
Decay in Treatment No Yes Yes Yes Yes Yes
Art SPECIFICATIONS
File format acceptable PDF, EPS, DCS2 or Native files with all fonts and attachments, Adobe Indesign (Package), Adobe Illustrator, Quark (Collect for Output)
Document Setup size Page size should be set to the final trim size, remember to export with bleed if needed
PDF file format When exporting as a PDF file use the “High Quality Print” profile, add bleed when applicable
Process (CMYK) Yes Yes
Spot/Pantone (Create as Spot Colors) (See Pantone Book for naming standard) Yes/ preferred Yes/ preferred
Number of colors does not exceed quote/number of press decks (process counts as 4 colors) Check with your Outlook Group Sales Representative for the maximum number of press decks to best suit your job
If unsure of number of colors in the file… Print your file to your laser printer as separations, check number of sheet printed and image on those sheets
Trap, if unsure leave the trapping to Outlook Group 0.010" Text 0.015"
Cutback for white 0.020" min. 0.030" min.
Positive stroke’s minimum thickness requirements .5 pt. (1 pt. if 2+ colors) .5 pt. (1 pt. if 2+ colors)
Reverse stroke’s minimum thickness requirements 1 pt. (1.5 pt. if 2+ colors) 1 pt. (1.5 pt. if 2+ colors)
CMYK/Grayscale resolution DPI requirements Minimum 250 dpi
Screens and Dot resolution (LPI) Do not save images with screens or dot preferences, this will be determined by press specifications
Art/Bitmap resolution of all images DPI requirements Minimum 600 dpi
Collect or imbed fonts Send all fonts with support files. If PDF file format, imbed all fonts
Positive fonts size requirements (minimum) 5 pt. (7 pt. if 2+ colors) 5 pt. (7 pt. if 2+ colors)
Reverse fonts size requirements (minimum) (preferably bold sans serif) 9 pt. (outline if 2+ colors) 9 pt. (outline if 2+ colors)
Superscripts / Subscript size requirements (minimum) The physical size must not be smaller than minimum fonts size from above, positive or reverse
Bleed - amount of copy, art or color that extends past dieline or trimlin (minimum) 0.125 / 0.0625" 0.125"
Copy or art held inside trimline, dieline or folds unless intending to bleed (minimum) 0.125 / 0.0625" 0.125 / 0.0625"
Corners rounded on dieline, if necessary 0.0156" N/A
Dieline Color Color all dielines as a spot-color named “dieline” or Rampage_Dieline” with overprint setting - DO NOT use this color as part of your artwork, it will not print
FSC certified art has required clear area for the logo 1.5"w x 0.75"h for horizontal logos; 1.125"w x 1.25"h for vertical logos
LPI (Line Screen), Screen Angles, Min & Max Dot OG will determine these preferences; as to what printing method is used
Supplied proofs for color accuracy Color Match Proof - if provided must be SWOP, GRACoL or G7 Certified
Barcode Scaling Minimum 80% / Maximum 200% (1.25"w for all 12 numbers); the height of some symbologies can be truncated
Quiet Zone area size Minimum 0.125" clear space on all sides of the barcode
BWR applied correctly 0.0025" 0.004"
Direction of bars correct Bars should travel in the web direction
Construction of barcode All barcodes must be sent as vector art (Adobe Photoshop is not acceptable)
Color of barcode Darkest available color (other than red) with a light background color, preferably white
USPS address area size specifications, if mailing Minimum 0.25” clear space all sides of the address and it’s barcode; at least 60% opacity rectangle behind the address area
USPS address area color specifications, if mailing Background color white or at least less than 15% opacity in the red and green spectrum
FILE SETUP
COLORS
STROKES/ RULES
IMAGES
FONTS
DIELINE/TRIMLINE
MISCELLANEOUS
BARCODES/MAILING
920.722.2333 www.outlookgroup.com
Art SPECIFICATIONS
File format acceptable PDF, EPS, DCS2 or Native files with all fonts and attachments, Adobe Indesign (Package), Adobe Illustrator, Quark (Collect for Output)
Document Setup size Page size should be set to the final trim size, remember to export with bleed if needed
PDF file format When exporting as a PDF file use the “High Quality Print” profile, add bleed when applicable
Process (CMYK) Yes Yes
Spot/Pantone (Create as Spot Colors) (See Pantone Book for naming standard) Yes/ preferred Yes/ preferred
Number of colors does not exceed quote/number of press decks (process counts as 4 colors) Check with your Outlook Group Sales Representative for the maximum number of press decks to best suit your job
If unsure of number of colors in the file… Print your file to your laser printer as separations, check number of sheet printed and image on those sheets
Trap, if unsure leave the trapping to Outlook Group 0.010" Text 0.015"
Cutback for white 0.020" min. 0.030" min.
Positive stroke’s minimum thickness requirements .5 pt. (1 pt. if 2+ colors) .5 pt. (1 pt. if 2+ colors)
Reverse stroke’s minimum thickness requirements 1 pt. (1.5 pt. if 2+ colors) 1 pt. (1.5 pt. if 2+ colors)
CMYK/Grayscale resolution DPI requirements Minimum 250 dpi
Screens and Dot resolution (LPI) Do not save images with screens or dot preferences, this will be determined by press specifications
Art/Bitmap resolution of all images DPI requirements Minimum 600 dpi
Collect or imbed fonts Send all fonts with support files. If PDF file format, imbed all fonts
Positive fonts size requirements (minimum) 5 pt. (7 pt. if 2+ colors) 5 pt. (7 pt. if 2+ colors)
Reverse fonts size requirements (minimum) (preferably bold sans serif) 9 pt. (outline if 2+ colors) 9 pt. (outline if 2+ colors)
Superscripts / Subscript size requirements (minimum) The physical size must not be smaller than minimum fonts size from above, positive or reverse
Bleed - amount of copy, art or color that extends past dieline or trimlin (minimum) 0.125 / 0.0625" 0.125"
Copy or art held inside trimline, dieline or folds unless intending to bleed (minimum) 0.125 / 0.0625" 0.125 / 0.0625"
Corners rounded on dieline, if necessary 0.0156" N/A
Dieline Color Color all dielines as a spot-color named “dieline” or Rampage_Dieline” with overprint setting - DO NOT use this color as part of your artwork, it will not print
FSC certified art has required clear area for the logo 1.5"w x 0.75"h for horizontal logos; 1.125"w x 1.25"h for vertical logos
LPI (Line Screen), Screen Angles, Min & Max Dot OG will determine these preferences; as to what printing method is used
Supplied proofs for color accuracy Color Match Proof - if provided must be SWOP, GRACoL or G7 Certified
Barcode Scaling Minimum 80% / Maximum 200% (1.25"w for all 12 numbers); the height of some symbologies can be truncated
Quiet Zone area size Minimum 0.125" clear space on all sides of the barcode
BWR applied correctly 0.0025" 0.004"
Direction of bars correct Bars should travel in the web direction
Construction of barcode All barcodes must be sent as vector art (Adobe Photoshop is not acceptable)
Color of barcode Darkest available color (other than red) with a light background color, preferably white
USPS address area size specifications, if mailing Minimum 0.25” clear space all sides of the address and it’s barcode; at least 60% opacity rectangle behind the address area
USPS address area color specifications, if mailing Background color white or at least less than 15% opacity in the red and green spectrum
FLEXOGRAPHICNarrow Web Wide Web
top related