3277c1184271c8031e9b65da1153f3ae
Post on 27-Mar-2016
213 Views
Preview:
DESCRIPTION
TRANSCRIPT
✆ 1 3 0 0 7 8 0 4 5 0
12 www.ledasecur i ty.com.au
Des igne r Range > S ta in l e s s S tee l
Leda manufactures two classic styles of stainless steel bollards – Slimline and Regal – in a array of sizes in both fixed, and locking and removable. These aesthetically attractive bollards have, for many years, been the most widely used architectural bollards installed throughout Australia.
More recently, Leda’s designers have developed the Oval range of bollards to complement the Slimline and Regal styles and provide architects and property developers with an alternative to a round profile.Research conducted in the UK revealed that the
narrowness of the oval bollard profile improved pedestrian traffic flow rates at shopping centres and sporting venues.
The Leda stainless steel range also includes an exciting selection of contemporary urban designs to suit various applications and projects.
Fea tu re s• Classic, clean smooth lines
• Range of sizes
• Linished or electropolished finish
• Choice of styles –Fixed InsituFixed BaseplateLocking & Removable Lighting (refer Lighting bollards)Retractable (refer Retractable section)
Leda stainless steel bollards are normally manufactured from Grade 304 material. Grade 316 is available if specified, and is recommended for installations within 2 kilometres of the coast. Discolouration or ‘tea staining’ of stainless steel is often seen around coastal locations and can get progressively worse closer to the ocean, in higher temperatures or with exposure to wind. For these aggressive environmental conditions, Leda recommends electropolishing (pickling) as an alternative treatment and finish.
The electropolishing process involves immersing the finished stainless steel product in a nitric and hydrofluoride bath to pickle and passivate the metal surface and remove any contamination caused by the fabrication process.
While correct specifications and smoother surface finishes like electropolishing help minimise this staining, regular cleaning (2-3 times per year) of stainless steel surfaces is recommended.
Leda’s Care and Maintenance of Stainless Steel Products provides a helpful guide to cleaning procedures and methods, and can be downloaded from the Leda website.
✆ 1 3 0 0 7 8 0 4 5 0
13
Intro 2
Designer 8
Stainless 12
Aluminium 30
Timber 34
Pre-cast 38
Steel 46
Plastic 56
Lighting 60
Security 72
Designing 74
Impact Rating 78
Installation 80
Products 84
Retractable 108
HVM Bollards 110
VAC Bollards 118
Industrial 122
Bollards 124
Power 128
Card Readers 132
General 139
Accessories 142
Code Index 149
www.ledasecur i ty.com.au
D e s i g n e rB o l l a r d s
Slimline 80NB-300NB
Lighting & Retractablemodels available
Regal 80NB-300NB
OvalRectangular
Square100mm & 150mm
Breeze
Wave
Saw
Tri-shaft
Split Square
Split Round
Corso
Fallen
Helix
Cube
ScreenLighting models available
SmartIlluminated
Des igne r Range > S ta in l e s s S tee l
Many Slimline and Regal Bollards are security rated, refer Impact Ratings Table on p79
✆ 1 3 0 0 7 8 0 4 5 0
Slimline 80NBMaterial 80NB (88.9) x 3.05 / 5.49 / 7.62mm Grade 304 stainless steel pipe
Finish Linished or electro-polished
Locking &RemovableSSP80R A 3.05SSP80R B 5.49SSP80R C 7.62
FixedInsitu
SSP80F A 3.05SSP80F B 5.49SSP80F C 7.62
FixedBaseplate
SSP80B A
Screw-downSupermarket Bollard
SSB80F A 3.05
Minimum350 x 350 x 500 deep.Security (vehicle impact rated) bollards require strip footings.
1
1
1111
Locking &RemovableSSP80RAS 3.05 1
1
Reflective tapeoption
Unique installationrequires a single M20chemical anchor
Screw-down
Sleeve & Cover PlateSHCP80DENSW Dept of Educationspecification
Optional bronze motifwith your crest or logo
Top View
Baseplate
166
LightingRefer Lighting section
900
150 150 nom
Retractablerefer Security section.
Slimline bollards are the most popular and
widely-used architectural bollards in Australia.
14 www.ledasecur i ty.com.au
Des igne r Range > S ta in l e s s S tee l
✆ 1 3 0 0 7 8 0 4 5 0
Slimline 90/100NB Material 90NB (101.6) / 100NB (114.3) x 3.05mm Grade 304 s/steel pipe
Finish Linished or electro-polished
Material 125NB (141.3) x 3.40mm Grade 304 s/steel pipe
Finish Linished or electro-polished
FixedInsitu
SSP100F A
FixedBaseplateSSP100B A
Perforated sleeveepoxy-fixed
into cored hole
100
1
90NB 100NB 100NB
Reflective tape option
300
900
900
Optional bronze motifwith your crest or logo
Top View
Screw-downSupermarket Bollard
SSB90FAWW 3.05 1
32mm threaded rodwelded to baseplate 196
FixedInsitu
SSP125F A
FixedBaseplateSSP125B A1
Locking &RemovableSSP125R A 1
Slimline 125NB
Baseplate
223
Reflective tape option
Minimum350 x 350 x 500 deep.Security (vehicle impact rated) bollards require strip footings.
Minimum400 x 400 x 500 deep.Security (vehicle impact rated) bollards require strip footings.
15
Intro 2
Designer 8
Stainless 12
Aluminium 30
Timber 34
Pre-cast 38
Steel 46
Plastic 56
Lighting 60
Security 72
Designing 74
Impact Rating 78
Installation 80
Products 84
Retractable 108
HVM Bollards 110
VAC Bollards 118
Industrial 122
Bollards 124
Power 128
Card Readers 132
General 139
Accessories 142
Code Index 149
www.ledasecur i ty.com.au
D e s i g n e rB o l l a r d s
De s igne r Range > S ta in l e s s S tee l
✆ 1 3 0 0 7 8 0 4 5 0
Slimline 150NBMaterial 150NB (168.3) x 3.40 / 7.11 / 10.97mm Grade 304 stainless steel pipe
Finish Linished or electro-polished
Locking & Removable
SSP150R A 3.40SSP150R B 7.11SSP150R C 10.97
Fixed Insitu
SSP150F A 3.40SSP150F B 7.11SSP150F C 10.97 Fixed Baseplate
SSP150B A
122
122
Fixed InsituTraffic LightsSSP150T A 3.40SSP150T B 7.11SSP150T C 10.97
123
Lifting Trolleysavailable for easy removalof heavierL&R bollards.Refer Accessories.
For use withRetractable bollards
Minimum400 x 400 x 500 deep.Security (vehicle impact rated) bollardsrequire strip footings.
Screw-down
Uniqueinstallationrequires asingle M20chemicalanchor
170nominal
Screw-down
Uniquemountingsystem
Reflective tapeoption
SSB150F A 3.40 1 SSB150B AWW 3.40 1
SSS150FA 900hSSS150FB 1200h
(Sleeve only)
2mm thick172mm ID.
For use with150NB IR bollards.
Refer Security section.
Stainless Steel SleevesRefer Security section
Baseplate
286
Optional bronzemotif with your crest or logo
Top View
LightingRefer Lighting section.
Supermarket Bollards
Retractablerefer Security section.
16 www.ledasecur i ty.com.au
Des igne r Range > S ta in l e s s S tee l
✆ 1 3 0 0 7 8 0 4 5 0
Slimline 200NB
Slimline 300NB
Material 200NB (219.0) x 3.76 / 8.18 / 12.70mm Grade 304 stainless steel pipe
Finish Linished or electro-polished
Material 300NB (323.4) x 4.57 / 9.53 / 12.70mm Grade 304 stainless steel pipe
Finish Linished or electro-polished
Minimum500 x 500 x 500 deep.Security (vehicle impact rated) bollards require strip footings.
Minimum600 x 600 x 500 deep.Security (vehicle impact rated) bollards require strip footings.
FixedInsitu
SSP200F A 3.76SSP200F B 8.18SSP200F C 12.70
223 Fixed Baseplate
SSP200B A
FixedInsitu
SSP300F A 4.57SSP300F B 9.52SSP300F C 12.70
233
Fixed BaseplateSSP300B ASSP300B B
410
Baseplate
Optional bronze motifwith your crest or logo
Top View
300
300
RetractableRefer Security section
Optional bronze motifwith your crest or logo
Top View
300
Baseplate
For use with200NB IR bollards.
Refer Securitysection.
Stainless Steel SleevesRefer Security section
Stainless Steel SleevesRefer Security section
SSS200FA 900hSSS200FB 1200h
(Sleeve only)
SSS300FA 900hSSS300FB 1200h
(Sleeve only)
For use with300NB IR bollards.
Refer Security section.
17
Intro 2
Designer 8
Stainless 12
Aluminium 30
Timber 34
Pre-cast 38
Steel 46
Plastic 56
Lighting 60
Security 72
Designing 74
Impact Rating 78
Installation 80
Products 84
Retractable 108
HVM Bollards 110
VAC Bollards 118
Industrial 122
Bollards 124
Power 128
Card Readers 132
General 139
Accessories 142
Code Index 149
www.ledasecur i ty.com.au
D e s i g n e rB o l l a r d s
De s igne r Range > S ta in l e s s S tee l
✆ 1 3 0 0 7 8 0 4 5 0
Regal 80NB
Regal 100NB
Locking &Removable
SSR80R A 3.05SSR80R B 5.49SSR80R C 7.62
FixedInsitu
SSR80F A 3.05SSR80F B 5.49SSR80F C 7.62
FixedBaseplateSSR80B A
TypicalSide Elevation
45°
TypicalSide Elevation
FixedInsitu
SSR100F A
Minimum350 x 350 x 500 deep.Security (vehicle impact rated) bollards require strip footings.
Minimum350 x 350 x 500 deep.Security (vehicle impact rated) bollards require strip footings.
11
1
1
FixedBaseplateSSR100B A
11 1
Baseplate
Material 80NB (88.9) x 3.05 / 5.49 / 7.62mm Grade 304 stainless steel pipe
Finish Linished or electro-polished
Material 100NB (114.3) x 3.05 mm Grade 304 stainless steel pipe
Finish Linished or electro-polished
Optionalbronze motifwith your crest or logo
Optional bronze motifwith your crest or logo
170nominal
Reflective tapeoption
Screw-downinstallation
Uniqueinstallationrequires asingle M20
chemical anchor
Screw-downSupermarket Bollard
SSRB80F A 3.05 1
Baseplate
166
196
45°
The Regal’s sloping top stops rubbish placement and
can also be used to housesignage or branding.
18 www.ledasecur i ty.com.au
Des igne r Range > S ta in l e s s S tee l
✆ 1 3 0 0 7 8 0 4 5 0
Regal 125NBMaterial 125NB (141.3) x 3.40mm Grade 304 stainless steel pipe
Finish Linished or electro-polished
Material 150NB (168.3) x 3.40 / 7.11 / 10.97mm Grade 304 stainless steel pipe
Finish Stainless steel. Linished or electro-polishedRegal 150NB
Locking & Removable
Stainless SteelSSR150R A 3.40SSR150R B 7.11SSR150R C 10.97
Fixed BaseplateSSR150B A
112
Fixed Insitu
Stainless SteelSSR150F A 3.40SSR150F B 7.11SSR150F C 10.97
112
Minimum400 x 400 x 500 deep.Security (vehicle impact rated) bollards require strip footings.
Lifting Trolley available for easy removal of heavier L&R bollards.Refer Accessories section.
TypicalSide Elevation
Minimum400 x 400 x 500 deep.Security (vehicle impact rated) bollards require strip footings.
FixedInsitu
SSR125F A 1
Locking &RemovableSSR125R A 1
FixedBaseplateSSR125B A
Optionalbronze motifwith your crest or logo
Lifting Trolley available for easy removal of heavier L&R bollards.Refer Accessories section.
Optionalbronze motifwith your crest or logo
SSSR150FA 900hSSSR150FB 1200h
(Sleeve only)
2mm thick172mm ID.
For use with150NB IR bollards.
Refer Security section.
45°
45°
Sleeve Stainless SteelRefer Security section
900
900
Baseplate
223
Baseplate
286
200
300
19
Intro 2
Designer 8
Stainless 12
Aluminium 30
Timber 34
Pre-cast 38
Steel 46
Plastic 56
Lighting 60
Security 72
Designing 74
Impact Rating 78
Installation 80
Products 84
Retractable 108
HVM Bollards 110
VAC Bollards 118
Industrial 122
Bollards 124
Power 128
Card Readers 132
General 139
Accessories 142
Code Index 149
www.ledasecur i ty.com.au
D e s i g n e rB o l l a r d s
De s igne r Range > S ta in l e s s S tee l
✆ 1 3 0 0 7 8 0 4 5 0
Regal 200NB
Regal 300NB
Material 200NB (219.0) x 3.76 / 8.18 / 12.70mm Grade 304 stainless steel pipe
Finish Linished or electro-polished
Material 300NB (323.4) x 4.57 / 9.53 / 12.70mm Grade 304 stainless steel pipe
Finish Linished or electro-polished
Minimum500 x 500 x 500 deep.Security (vehicle impact rated) bollards require strip footings.
Minimum600 x 600 x 500 deep.Security (vehicle impact rated) bollards require strip footings.
Fixed Insitu
SSR200F A 3.76SSR200F B 8.18SSR200F C 12.70
223
Fixed BaseplateSSR200B A
Fixed Insitu
SSR300F A 4.57SSR300F B 9.52SSR300F C 12.70
233
Fixed BaseplateSSR300B A
300
410
Baseplate
TypicalSide Elevation
TypicalSide Elevation
15°
15°
300
300
Stainless Steel SleevesSSSR300FA 900hSSSR300FB 1200h
(Sleeve only)For use with
300NB IRB bollards.Refer Security section.
Stainless Steel SleevesSSSR200FA 900hSSSR200FB 1200h
(Sleeve only)For use with
200NB IRB bollards.Refer Security section.
Baseplate
20 www.ledasecur i ty.com.au
Des igne r Range > S ta in l e s s S tee l
✆ 1 3 0 0 7 8 0 4 5 0
Oval Material Grade 316 stainless steel / galvanised pipe
Finish Linished or electro-polished
Locking & Removable
SOV80RFront View
Locking & Removable
SOV80FFront View
Minimum400 x 400 x 500 deep.Security (vehicle impact rated) bollards require strip footings.
1000
200300
8mm Baseplate
1000
8
23°
Top View250
260
23°
FixedBaseplate
SOV80BFront View
140Side View
240
Typical Top View240Typical
Side View
80NB (88.9mm) galvanised inner pipe
Best suited for installations on flat pavement
Maximises pedestrian flows.Ideal for sporting venues and shopping centres
where high volumes of pedestrian traffic are possible.Best suited for installations on flat pavement
Typical Top View140
21
Intro 2
Designer 8
Stainless 12
Aluminium 30
Timber 34
Pre-cast 38
Steel 46
Plastic 56
Lighting 60
Security 72
Designing 74
Impact Rating 78
Installation 80
Products 84
Retractable 108
HVM Bollards 110
VAC Bollards 118
Industrial 122
Bollards 124
Power 128
Card Readers 132
General 139
Accessories 142
Code Index 149
www.ledasecur i ty.com.au
D e s i g n e rB o l l a r d s
De s igne r Range > S ta in l e s s S tee l
✆ 1 3 0 0 7 8 0 4 5 0
SquareMaterial Grade 304 stainless steel RHS (Rectangular Hollow Section)
Finish Linished or electro-polished
100 x 100x 3mm RHS
s/steel sleeve s/steel sleeve
150 x 150x 5mm RHS
recommendedconcrete footings400 x 400 x 500 deep
Locking &Removable
SST11R
FixedBaseplate
SST11BFixed Insitu
SST1515FFixed Baseplate
SST1515BFixed Insitu
SST11F
Locking &Removable
SST1515R
200
200
Baseplate
270
270
Baseplate
RectangularMaterial Grade 304 stainless steel RHS (Rectangular Hollow Section)
Finish Linished or electro-polished
FixedBaseplate
SST115B
FixedInsitu
SST115F
Locking &Removable
SST115R
100 x 50 RHSx 2mm
stainless steel sleeverecommendedconcrete footing350 x 350 x 500 deep
200
150
Baseplate
300
22 www.ledasecur i ty.com.au
Des igne r Range > S ta in l e s s S tee l
✆ 1 3 0 0 7 8 0 4 5 0
Fixed BaseplateSSM151B
Front View Side View
This design, used with a variety of stainless steel
or glass infill panels,also lends itself
to balustrade applications.Top View /Baseplate
200
200
This design, used with a variety of stainless steel
or glass infill panels,also lends itself
to balustrade applications.
Fixed BaseplateSSM152B
Front View Side View
BreezeMaterial 12mm Grade 304 stainless steel plate
Finish Linished or electro-polished
WaveMaterial 12mm Grade 304 stainless steel plate
Finish Linished or electro-polished
Top View /Baseplate
200
200
23
Intro 2
Designer 8
Stainless 12
Aluminium 30
Timber 34
Pre-cast 38
Steel 46
Plastic 56
Lighting 60
Security 72
Designing 74
Impact Rating 78
Installation 80
Products 84
Retractable 108
HVM Bollards 110
VAC Bollards 118
Industrial 122
Bollards 124
Power 128
Card Readers 132
General 139
Accessories 142
Code Index 149
www.ledasecur i ty.com.au
D e s i g n e rB o l l a r d s
De s igne r Range > S ta in l e s s S tee l
✆ 1 3 0 0 7 8 0 4 5 0
24 www.ledasecur i ty.com.au
Des igne r Range > S ta in l e s s S tee l
Top View /Baseplate
50mm holes
CorsoMaterial 12mm Grade 304 stainless steel plate
Finish Linished or electro-polished
270
270
Fixed BaseplateSSM153B
Front View Side View
FallenMaterial Grade 304 stainless steel pipe
Finish Linished or electro-polished
900
32NB (42.2) x 2.77mm pipe
200
Top View /Baseplate
Fixed BaseplateSF200B
Front View200
Side View200
✆ 1 3 0 0 7 8 0 4 5 0
recommendedconcrete footing350 x 350 x 500 deep
200
200
Split Square
150 x 50mmRHS
Top View /Baseplate
270
Split Round
Fixed BaseplateLSS259B
Fixed InsituLSS259F
Fixed BaseplateLSS275B
Fixed InsituLSS275F
150NB (168.3mm) pipe sections
Front View Typical Side View
286
Top View /Baseplate
168168Front View
168
150150Front View
150Front View Typical Side View
270
Material Grade 304 stainless steel pipe
Finish Linished or electro-polished
Material Grade 304 stainless steel RHS
Finish Linished or electro-polished
recommendedconcrete footing350 x 350 x 500 deep
900
900
25
Intro 2
Designer 8
Stainless 12
Aluminium 30
Timber 34
Pre-cast 38
Steel 46
Plastic 56
Lighting 60
Security 72
Designing 74
Impact Rating 78
Installation 80
Products 84
Retractable 108
HVM Bollards 110
VAC Bollards 118
Industrial 122
Bollards 124
Power 128
Card Readers 132
General 139
Accessories 142
Code Index 149
www.ledasecur i ty.com.au
D e s i g n e rB o l l a r d s
De s igne r Range > S ta in l e s s S tee l
✆ 1 3 0 0 7 8 0 4 5 0
recommendedconcrete footing350 x 350 x 500 deep
200
Saw
100 x 10mm flat bar
900 800
Front View100
Typical Side View100
Front View100
200
200
Top View / Baseplate
Material 10mm Grade 304 stainless steel plate
Finish Linished or electro-polished
Fixed BaseplateLSS209B
Fixed InsituLSS209F
recommendedconcrete footing350 x 350 x 500 deep
200
Tri-shaft
50 x 10mm flat bar
Front View160
Front View160
Typical Side View160
200
Top View / Baseplate
Material 10mm Grade 304 stainless steel plate
Finish Linished or electro-polished
Fixed BaseplateLST200B
Fixed InsituLST200F
900
26 www.ledasecur i ty.com.au
Des igne r Range > S ta in l e s s S tee l
✆ 1 3 0 0 7 8 0 4 5 0
recommendedconcrete footing350 x 350 x 500 deep
recommendedconcrete footing350 x 350 x 500 deep
200
200
Cube
150 x 150 x 5mm
Front View150
Typical Side View150
Front View150
Top View /Baseplate
295
300
150
900
Helix
900
286
Ø 150NB (168.3mm) pipe
Top View /Baseplate
Material Grade 304 stainless steel RHS
Finish Linished or electro-polished
Material Grade 304 Ø 150NB (168.3mm) stainless steel pipe
Finish Linished or electro-polished
Fixed BaseplateLSC209B
Fixed InsituLSC209F
Front View168
Typical Side View168
Front View168
Fixed BaseplateLSH200B
Fixed InsituLSH200F
27
Intro 2
Designer 8
Stainless 12
Aluminium 30
Timber 34
Pre-cast 38
Steel 46
Plastic 56
Lighting 60
Security 72
Designing 74
Impact Rating 78
Installation 80
Products 84
Retractable 108
HVM Bollards 110
VAC Bollards 118
Industrial 122
Bollards 124
Power 128
Card Readers 132
General 139
Accessories 142
Code Index 149
www.ledasecur i ty.com.au
D e s i g n e rB o l l a r d s
De s igne r Range > S ta in l e s s S tee l
✆ 1 3 0 0 7 8 0 4 5 0
900 600
100
200
The illuminated Smart Bollard’s versatile design lends itself for use in a variety of foyers, concourses and other public spaces. Illumination using hard wired connection is also an option.Insert Panels x 3176 x 750 x 3mm Polycarbonate SheetSB200S
SSM200BFront View
219
160
300
Top View / Baseplate
200NB (219mm) stainless steel pipe
Smart Bollard
Side View
Material Grade 304 stainless steel pipe
Finish Linished or electro-polished
din
osau
rs
ScreenMaterial Grade 304 stainless steel mesh
Finish Linished (Level 4)
Top View /Baseplate
Top View /Baseplate
286300
300
Front View168
RoundFixed Baseplate
JSR150B
Front View177
SquareFixed Baseplate
JSS150B
LightingAvailable in Round and Square.
Refer Lighting section.
28 www.ledasecur i ty.com.au
Des igne r Range > S ta in l e s s S tee l
✆ 1 3 0 0 7 8 0 4 5 0
Sign BollardsMaterial 150NB (168.3) x 3.40mm Grade 304 stainless steel pipe
Finish Linished or electro-polished
Sign BollardSSP150FSFront View
Sign BollardSSP151FSFront View Typical Rear View
EXIT
EXIT
EXIT
750
900
Smokers BollardsMaterial Butt Bin. 90NB (101.6) x 2.11mm Grade 304 Stainless Steel Pipe Bollard. 150NB (168.3) x 3.40mm Grade 304 Stainless Steel Pipe Finish Linished or electro-polished
ButtBin
URB100ASWM
SmokersBollard
SSR150FAS
1100nominal
400
Key lockableremovable bin.500 butt capacity
1200 970
Baseplate
Key lockableremovable bin.500 butt capacity
286
29
Intro 2
Designer 8
Stainless 12
Aluminium 30
Timber 34
Pre-cast 38
Steel 46
Plastic 56
Lighting 60
Security 72
Designing 74
Impact Rating 78
Installation 80
Products 84
Retractable 108
HVM Bollards 110
VAC Bollards 118
Industrial 122
Bollards 124
Power 128
Card Readers 132
General 139
Accessories 142
Code Index 149
www.ledasecur i ty.com.au
D e s i g n e rB o l l a r d s
De s igne r Range > S ta in l e s s S tee l
top related