2010 edition product cataloguec - bj howes · 2018-02-20 · ii lysaght product catalogue – 2010...
Post on 18-Mar-2020
3 Views
Preview:
TRANSCRIPT
2010 EditionProduct CatalogueC
Disclaimer, warranties and limitation of liability
This publication is intended to be an aid for all trades and professionals involved with specifying and installing LYSAGHTproducts and not to be a substitute for professional judgement.
Terms and conditions of sale available at local BlueScopeLysaght sales offices.
Except to the extent to which liability may not lawfully be excluded or limited, BlueScope Steel Limited will not be under or incur any liability to you for any direct or indirect loss or damage (including, without limitation, consequential loss or damage such as loss of profit or anticipated profit, loss of use, damage to goodwill and loss due to delay) however caused (including, without limitation, breach of contract, negligence and/or breach of statute), which you may suffer or incur in connection with this publication.
© Copyright BlueScope Steel Limited 15 December, 2009
LYSAGHT Product Catalogue – 2010 Edition
LYSAGHT Product Catalogue – 2010 Edition i
Product TestingOur Research & Development Department laboratory is NATA-registered and tests our products to ensure accuracy and reliability of our data.
Your suggestionsPlease send your suggestions for improvements to this publication to: The Publications Officer, BlueScope Lysaght R & D, 27 Sterling Road, Minchinbury NSW 2770
Product Descriptions All descriptions, specifications, illustrations, drawings, data, dimensions and weights contained this catalogue, all technical literature and websites containing information from BlueScope Lysaght are approximations only. They are intended by BlueScopeLysaght to be a general description for information and identification purposes and donot create a sale by description. BlueScope Lysaght reserves the right at any time to:(a) supply Goods with such minor modifications from its drawingsand specifications as it sees fit; and(b) alter specifications shown in its promotional literature to reflect changes made after the date of such publication.
WarrantiesThe LYSAGHT brand has been synonymous with the Australianbuilding industry for over 150 years. With such a strong and proud Australian history, BlueScope Lysaght continue to manufacture high quality building products from 100% Australian steel.
Our continuing confidence in our products is shown in the unique warranties we offer.
We invite you to ask about the warranties applicable to your proposed purchase and the eligibility terms at your local LYSAGHT supplier.
All descriptions, specifications, illustrations, drawings, data, dimensions and weights contained in this catalogue and other price lists, technical literature, websites or other advertising matter of BlueScopeLysaght are approximations only. They are intended by BlueScopeLysaght to be a general description for information and identification purposes and do not create a sale by description. BlueScope Lysaght reserves the right at any time to:(a) supply Goods with such minor modifications from its drawings and specifications as it sees fit; and(b) alter specifications shown in its promotional literature to reflect changes made after the date of such publication.
Availability of productsIn most commercial aspects, refer to the relevant State price list to determine the details of the available product offer and service offer with regards to colour availability, product details and charges, including transportation and minimum order quantities.
Normally products are not shipped interstate, as it cannot be guaranteed what condition fragile products might arrive.
It is important that you ask your local BlueScope Lysaghtrepresentatives about the availability and delivery times for the products you want to use.
Product AvailabilityBlack areas on map indicate the product is in the region's product offer. However, in some regions product availability to subject to enquiry and minimum order quantities may apply. These have been indicated where this applies.
Unshaded areas on map indicate that the product is not available in that region.
AbbreviationsBMT = Base metal thicknessMPa = MegaPascals (units of
pressure)CB = COLORBOND colours
on ZINCALUME steelor stainless steel
Cu = CopperGB = GALVABOND steel
unpaintedSS = Stainless steelZL = ZINCALUME steel
unpaintedMeasurements are millimetres, unless otherwise noted.
Further information
literature, please visit our website: www.lysaght.com.
available by contacting theSTEEL DIRECT Technical Information Service on 1800 641 417.
LYSAGHT products.
LYSAGHT has been part of Australia’s architectural and building heritage, shaping so much of what’s been admired in homes and buildings throughout the country’s landscape. We're proud of our reputation for quality, integrity and expertise.
And since BlueScope Lysaght is part of BlueScope Steel, you know we stand behind the products we sell - year after year.
Our wide range of products and our experience are available to enhance your project. We hope you find this catalogue helpful.
ProductAvailability
ii LYSAGHT Product Catalogue – 2010 Edition
Apron flashing See
Astragal See straps.
Barge A finishing at the gable end of a roof, fixed parallel to the roof slope.
BRITEWITE® Paintedunderside of BONDEK to improve ceiling appearance.
BMT Base metal thickness
Box gutter A gutter not at an eave, typically at the base of two opposing roof slopes.
Capping A cover at the top of a gap that weatherproofs, typically at the ridge of a pitched roof.
Chimney gutter See soaker
Cladding Sheeting that encloses a building — roofing and walling.
COLORBOND® Prepainted aluminium-zinc coated steel sheeting.
Concealed-fastened A method of fixing cladding by means of hidden, fixing clips or brackets (sometimes called secret fixing).
Downpipe A pipe to carry roof water from gutters and roof catchments to drains or storage tanks.
Drop See pop.
Eaves gutter A roof gutter attached at an eaves overhang.
Elbow A fitting used in a downpipe, to change direction of the downpipe by about 90 degrees.
Electrolytic (galvanic) corrosion Corrosion resulting from the contact of two different metals when an electrolyte (like water) is present.
Expansion joint A joint in a long run of cladding, gutter or flashing designed to allow for thermal expansion and contraction.
Fall (slope) The slope of the roof or gutter, often expressed in degrees, or as a ratio of vertical height to horizontal distance (e.g. 1 in 20).
Fascia (fascia board) A board, or rolled metal product of similar dimensions, fixed along the eaves, to which a gutter is secured.
Fixings Screws, nails or clouts used to fasten cladding to a building structure.
Flashing A material, usually metal, used to waterproof the junction between two intersecting roof and/or wall surfaces. At a masonry wall, it is often built into the mortar.
Apron flashing
A horizontal flashing installed where the top end of a roof slope meets a vertical projection, such as a chimney or parapet wall.
Counter (or over) flashing A flashing dressed down as a cover only, over a separate upstand.
Hanging flashing side,front or back cover piece used to prevent entry of water between abutting surfaces and other gutters, flashings and soakers.
Soaker flashing
weatherproof the perimeter of roof protrusions or penetrations. Soaker flashings are usually positioned under rather than over the surrounding metal roof.
GALVASPAN® Galvanisedsteel sheeting protected against corrosion by a zinc coating applied by the continuous hot-dip process.
Girth The width of the blank strip from which a profile is rolled (usually refers to gutters and flashings).
Gutter A channel that collects roof water and carries it to an outlet.
Mansard A roof built at two pitches, the steeper pitch commencing at the eaves and the flatter pitch finishing at the ridge.
Nozzle See Pop.
Offset A pipe fitting that directs a downpipe from the gutter, under the eaves soffit and down a wall.
Oilcanning Variation from flatness of sheet metal, creating undulations along the surface. The result is poor appearance and potential ponding.
Pan The flat portion between the ribs in a pan-type pre-formed sheet.
Parapet A wall on the perimeter of a building that projects above the line of the eaves.
Penetration A projection through the roof, e.g. vent pipe, chimney or rooflight.
Pierce-fastened A method of fixing cladding by means of a screw or nail which pierces the cladding.
Pitch see fall.
Ponding Pooling of undrained water on a roof.
Pop A short fitting in a gutter sole, where rainwater leaves the gutter.
Rainhead A box-shaped receptacle sometimes used between gutters and downpipes to provide an external overflow point.
R-value A value given for the resistance to heat transfer of a roof or wall system.
Rib A longitudinal upstand in cladding.
Ridge capping designed to weatherproof the junction at the apex of opposing roof slopes.
Saddle strap See straps.
Sarking A membrane to collect and discharge clear of the structure any water that may penetrate a roof or wall cladding.
Shoe A fitting used in a downpipe, to change direction of the downpipe by about 45 degrees.
Soaker (gutter) A small gutter located on the upper side of a chimneystack.
Soaker (flashings) Seeunder flashings.
Sole The internal, bottom surface of a roof gutter.
Spigot See Pop.
Spreader A downpipe-tee or elbow fixed at 90 degrees to the roof slope used to spread stormwater over a greater area of the roof.
Spouting See Gutter.
Straps A metal band used to secure a downpipe to a wall.
Sump A roof gutter pit used to connect downpipes to internal roof gutters.
Trays See Pan.
Thermal stress Stressdue to expansion and contraction caused by changes in temperature.
Thermal stress Stressdue to expansion and contraction caused by changes in temperature.
THERMATECH® Innovativenew paint technology which improves thermal performance of roof and wall claddings.
Valley boards Timber or profiled metal laid under a valley gutter to support it.
ZINCALUME® Steel sheeting protected against corrosion by an aluminium-zinc coating.
Glossary
CONTENTS
ROOFING 1
General notes on cladding 1CUSTOM ORB® 2CUSTOM BLUE ORB® 2Curved flashings 3Bullnose order form 4INTEGRITY® 820 5KLIP-LOK® 700 HI-STRENGTH® 6KLIP-LOK 406 7KLIP-LOK MAXIMA® 8LONGLINE® 305 9LONGLINE® 305 Tapered 9SPANDEK® 10SPANRIB® 10TRIMDEK® 11
® 12
WALLINGEASYCLAD® 13EASYCLAD® EH300 14MULTICLAD® 14MINI ORB® 15PANELRIB® 16TRIMWALL® 16WALLCLAD® 17Weatherboard 17
RAINWATER PRODUCTS 18
Flashings & CappingsStandard flashings & cappings 18Non-standard flashings, cappings, gutters 21Fascias, Gutters & DownpipesNOVALINE® fascia system 22NOVALINE® rebate fascia 22NOVALINE® fascia cover 22EMLINE® gutter 23TRIMLINE® gutter 23SHEERLINE® gutter 24Quad 150 & 175 gutter 25Hi-front Quad gutter 26Lo-front Quad gutter 26LYSAGHT OGEE® gutter 26Half-round gutter 27
® gutter 27RANCELINE® gutter 28COLONIAL® gutter 28Custom W.A. gutters 28Downpipes: Square & rectangular 29Pops 29Elbows & Shoes 30
Downpipe Offsets 30Downpipes: Round 31Pops/Nozzles/Drops 32Elbows/Shoes/Straps 32Downpipe Offsets/Crimped Bend 33Standoff Brackets/Chinamans Hat 33
ACCESSORIES 34
Accessory sheet 34
Strapping (coils) 34Silicone sealant 35Soft zinc flashing 35Tools (turn-up & turn-down) 35Ventilated ridges 36Louvres 36Box gutter brackets 37Box gutter sumps 37Box gutter expansion joints 37Rainwater heads 38Transitions, roof collars & overflows 38
Translucent sheeting 39Weatherlok® washers 39Lapseal 39Ant caps 40Dektite® pipe flashings 40Roof infill strips 40Safety mesh 41Ventilators: Industrial & Domestic 41
–Screw to steel 44
–Screw to timber 44
Insulation: Reflective foil laminate 45Insulation: Building blanket with foil 45Insulation: Building blanket 45Insulation: Ceiling batts 45Insulation: Wall batts 45
STRUCTURAL PRODUCTS 46
Zeds & Cees (Purlins & Girts) 46LYSAGHT SA Cee Section 46SUPAPURLINS: SUPAZEDS & SUPACEES® 47Dimensions of SUPAZEDS & SUPACEES 48
Hole Gauge Lines 49Purlin accessories 49HOOK-LOK® II bridging system 51Series 300 and 350 bridging system 52
TOPSPAN® light steel sections 54Associated top hat products 54Structural Steel decks 55BONDEK® and accessories 56LYSAGHT W-DEK® 57POWERDEK® 57Cold-formed sections: Standard 58Handy-C system 58INTERLOK® II 59INTERLOK® II stair treads 59Handiplank® 59
HOUSE FRAMING 60
SUPRATRUSS® - components 60®- components 61
SMARTRUSS® 63® 64
FENCING 65
MANDALAY™ fence 67
Gate Options 69
HOME IMPROVEMENTS 71
Lysaght Living Collection 71® 72® II 72® beams 73
Patio post 74
SERVICE & SUPPORT 75
LYSAGHT Website, Call Centre, R&D Dept. 75
INDEX 76
MAINTENANCE 78Cladding and Rainwater goods 78
WARRANTY INFORMATION 79Cladding and Rainwater goods 79
LYSAGHT Product Catalogue – 2010 Edition iii
iv LYSAGHT Product Catalogue – 2010 Edition
NOVALINE fascia system featuring LYSAGHTQuad gutter
®
LYSAGHT MINISCREEN® Plus
LYSAGHT Product Catalogue – 2010 Edition 1
Where appropriate, the following specifications apply to our roofing and walling products.
Materials
ZINCALUME® aluminium/zinc alloy-coated steel complying with AS 1397—2001
ZINC HI-TEN® zinc-coated steel complying with AS 1397—2001
designation is AISI/ASTM Type 430; UNS No. S43000
COLORBOND® prepainted steel complies with AS/NZS 2728:2007.
TestingOur products offer the full benefits of the latest methods for modelling wind pressures. Wind pressure capacity tables are determined by full-scale tests conducted at BlueScopeLysaght’s NATA registered testing laboratory, using our direct pressure-testing rig.
We also test for concentrated loading (foot traffic) and spring curving.
Metal & timber compatibility
Contact with, or runoff from, some materials can damage coated steel products. Buildingscan also be susceptible to condensation on inside surfaces.
The materials include certain metals, treated timbers and chemicals.
Incompatiblematerials include:
with COLORBOND®
stainless cladding)
treated timber (like CCAor tanalith treatments)
of dryness and wetness
moisture content (such as improperly-seasoned timber)
the atmosphere
coated steel products with incompatible materials.
rainwater from incompatible materials onto coated steel products.
members are compatible with the coated steel products or, alternatively, appropriately coated.
If there are doubts about the compatibility of other products being used, seek advice from our information line.
General notes on cladding
Clad
ding
2 LYSAGHT Product Catalogue – 2010 Edition
762mm cover(10.5 corrugations)
Overlap Underlap16mm
762mm cover (10.5 corrugations)or
608mm cover (8 corrugations)
17mmOverlap Underlap
LYSAGHT
LYSAGHT CUSTOM ORB®
is the famous Australiancorrugated profile. CUSTOMORB is equally at home with traditional and contemporary designs. It is available in two base metal thicknesses, and
Use CUSTOM BLUEORB for curving.
See also LYSAGHT WALLCLADfor walling applications.
Base materialsSteel grade: G550Coating: AZ150BMT: 0.42 & 0.48mm
LengthsLengths are custom cut. Check
supplier.
Mass (COLORBOND)BMT 0.42mm: 4.35 kg/m2-BMT 0.48mm: 4.93 kg/m2
TolerancesLength: + 10 mm, – 10mm Width: + 4 mm, – 4mm
Minimum roof pitch5 degrees (1:12)
FinishesA wide range of COLORBOND®
steel colours, COLORBOND®
metallic COLORBOND® stainlessand unpainted ZINCALUME®
steel.COLORBOND Metallic is
enquiry. COLORBOND Stainless is
enquiry.
Materials compatibility, standards & testingSee Page 1
CUSTOM ORB
LYSAGHT CUSTOM BLUEORB® is the curving quality, corrugated profile, famous throughout Australia.
There are two base metal thicknesses, and two widths with 762mm cover being the standard product. In NSW,
enquiry. In WA, 608mm cover is not available. Check in your state for finish and cover width.
Use CUSTOM ORB forapplications other than curving.
Base materialsSteel grade: G300Coating: AZ150 or Z600BMT: 0.60mm
LengthsLengths are custom cut.
with your supplier.
Mass (COLORBOND)BMT 0.60mm: 6.09 kg/m2
to enquiry and minimum order quantities apply.
TolerancesLength: + 10mm, – 10mm Width: + 2mm, – 2mm
Minimum roof pitch5 degrees (1:12)
Materials compatibility, standards & testingSee Page 1
CurvingSee below for flashings and
Finishes & coverUnpainted ZINCALUME steel:
mm coverWide range of COLORBONDsteel colours mm coverTanks AQUAPLATE® steel:
mm cover 8 & 10 corrugation CUSTOM BLUE ORBUnpainted zinc galvanised: 608 & 762mm cover
Some areas only stock the 762mm cover. Please refer to your local centre for availability.
CUSTOM BLUE ORBLYSAGHT
Standard width is 762mm.
ProductAvailability
ProductAvailability
Roof Claddings
LYSAGHT Product Catalogue – 2010 Edition 3
Curved flashingsCurved flashings and cappingsare made in fibreglass, plasticand COLORBOND® steel colours. Straight flashings and cappings are also made to match.Different states stock different materials and different lengths— ask your local supplier.
ColoursAll colours available to match COLORBOND® steel standard colour range.
Concave
Convex Cyma recta
Ogee
180Barrel vault
Bullnose
Cranked double curve Pre-curved or cranked ridge
Custom Blue OrbTypes of curve
Remember
Accessories
Cappings
Curved flashings
Flashings
Fasteners
Insulation
Rainwater goods
Translucent sheetingMaterial is non-metallic fibre to suit bullnose curve. (Right hand illustrated.)
ProductAvailability
Roof
ing
Bullnose order form1 CUSTOMERCustomer
Contact person (First name Surname)
Order number
Delivery address
2 DATANumber of sheets required
Topside colour (or finish)TT
Direction of laying (see in right-hand column)
Left to right
Right to left
Does the bullnosed sheet end-lap onto a straight sheet?
Yes
No
Have you supplied a template? (Preferred method)
Yes
No
3 DIMENSIONS
Straight roof section ‘SR’
mm
Straight vertical section ‘SV’mm(100mm min., 80mm in Vic.)
Radius ‘R’
mm(300 min., 400 minimum in Qld & 400 minimum in W.A.)
Roof pitch ‘P’
degrees (5° min.)
Awning width ‘A’AA
mm
Height less straight vertical ‘H’
mm
BlueScope Lysaght use onlyCurved length Straight roof section Straight vertical section Total length of sheetTT
‘SR’ ‘SV’ for manufacture
mm mm mm mm
Pass length Nip depth Pass reduction
Stra
ight
ver
tical
sect
ion
'SV
'Se
e be
low
for
min
.
Awning width 'A'
Straight roof section 'SR'
Roofpitch'P' Radius 'R'
See below for min.
'H'
Left sideoverlap
Right sideoverlap
CROSS SECTION
FRONT VIEW
Feed in
Min
Overlap
Overlap
4 LYSAGHT Product Catalogue – 2010 Edition
INTEGRITY 820
INTEGRITY 820® is a versatile cladding designed forcommercial and industrial applications, where fast and simple installation isa prime requirement.
The fasteners pierce thesheeting, however the unique
waterproofness on a par with
KLIP-LOK 700 HIGH STRENGTH®.
Note: INTEGRITY 820 is available by enquiry only and minimum order quantities apply.
Base materialsSteel grade: G550Coating: AZ150BMT: 0.42 & 0.48mmTT
LengthsLengths are custom cut. Check
supplier.
Mass (COLORBOND)BMT 0.42mm: 4.7 kg/m2
BMT 0.48mm: 5.3 kg/m2
TolerancesLength: + 0mm, – 15mmWidth: + 10mm, – 0mm
Minimum roof pitchBMT 0.42: 2 degrees BMT 0.48: 1 degree
FinishesA range of COLORBOND®
steel colours and unpaintedZINCALUME® steel.
Materials compatibility, standards & testingSee Page 1
LYSAGHT
Remember
Accessories
Cappings
Curved flashings
Flashings
Fasteners
Insulation
Rainwater goods
Translucent sheeting
Integrity optionalStyle capping strip
Integrity sealing platefor fasteners
ProductAvailability
820mm cover
48mm
LYSAGHT Product Catalogue – 2010 Edition 5
Roof
ing
6 Lysaght Product Catalogue – 2007 Edition
KLIP-LOK 700 HI-STRENGTH
LYSAGHT KLIP-LOKHI-STRENGTH® cladding isa strong, durable, versatile cladding used for both roofs and walls. It is available in long lengths.
The concealed fastening system allows KLIP-LOK to be used on roofs as low as 1 degreepitch.
KLIP-LOK 700 HS is commonly used on industrial and
clean modern look on houses.
KLIP-LOK HS is available as a long-length on-site rollformed product. Contact your local sales office for details.
Base materialsSteel grade: G550Coating: AZ150
BMT KLIP-LOK 700 HS:0.42, 0.48 & 0.60mm*
LengthsLengths are custom cut. Check
supplier.KLIP-LOK 700 HS is also available in long lengths with our on-site rollforming capability.Contact your sales representative for details.
Mass (COLORBOND)
KLIP-LOK 700HS:BMT 0.42mm: 4.74 kg/m2
BMT 0.48mm: 5.17 kg/m2
BMT 0.60mm*: 6.63 kg/m2
*Available from mobile rollformer only.
TolerancesLength: + 0mm, – 15mmWidth: + 4mm, – 4mm
Minimum roof pitchBMT 0.42: 2 degrees Other BMT: 1 degree
FinishesA range of COLORBOND®
steel colours and unpainted ZINCALUME® steelFor KLIP-LOK 700HS,COLORBOND Metallic is
enquiry.COLORBOND Stainless is
enquiry.
Number of clips Number of clips = (number of
Materials compatibility, standards & testingSee Page 1.
Mobile rollforming for KLIP-LOK HI-STRENGTHis available in any state,
LYSAGHT
KLIP-LOK clip (availability as above)LYSAGHT
700 mm cover
43 mm
KLIP-LOK 700 Hi-strength
KL-700HS clip(For KLIP-LOK 700 Hi-Strength)
ProductAvailability
6 LYSAGHT Product Catalogue – 2010 Edition
LYSAGHT KLIP-LOK 406
LYSAGHT KLIP-LOK 406 HIGH WIND
LYSAGHT KLIP-LOK®
cladding is a strong, durable, versatile cladding used for both roofs and walls. It is available in long lengths.
The concealed fastening system allows KLIP-LOK to be used on roofs as low as 1 degreepitch.
KLIP-LOK is commonly used on
but also gives a clean modern look on houses.
In the Northern Territory it is known as KLIP-LOK 406High Wind, and is cyclonicly
cyclonic screw assemblies.
Contact your local sales office for details.
Base materialsSteel grade: G550Coating: AZ150BMT KLIP-LOK 406:0.42, 0.48 & 0.60mm
In Northern Territory:Steel grade: G300BMT KLIP-LOK 406:0.55mm (standard)
applications)
LengthsLengths are custom cut. Check
supplier. Mass (COLORBOND)KLIP-LOK 406:BMT 0.42mm: 5.03 kg/m2
BMT 0.48mm: 5.71 kg/m2
BMT 0.60mm: 7.04 kg/m2
TolerancesLength: + 0mm, – 15mmWidth: + 4mm, – 4mm
Minimum roof pitchBMT 0.42: 2 degrees Other BMT: 1 degree
FinishesIn NT, ZINCALUME® steel is
quantities only.A range of COLORBOND®
steel colours and unpainted ZINCALUME® steel
Number of clips Number of clips = (number of
Materials compatibility, standards & testingSee Page 1.
KLIP-LOK 406 High Wind is made locally in NT.
Made in NSW.
KLIP-LOK 406 accessoriesLYSAGHT
406 mm cover
41 mm
KLIP-LOK 406
KL65
KL-65 clip(For KLIP-LOK 406)
Rib cap8 degrees for KL-406
(ZINCALUME®)(Not available in NSW)
ProductAvailability
LYSAGHT Product Catalogue – 2010 Edition 7
Subject to enquiry in Qld & WA
Roof
ing
8 Lysaght Product Catalogue – 2007 Edition
KLIP-LOK MAXIMA
LYSAGHT KLIP-LOK MAXIMA®
cladding is a strong, durable, versatile cladding used for both roofs and walls. It is available in long lengths.
The concealed fastening system allows KLIP-LOK MAXIMA to be used on roofs as low as 1 degreepitch.
KLIP-LOK MAXIMA is commonly used on industrial and
clean modern look on houses.
Contact your local sales office for details.
Base materialsSteel grade: G550Coating: AZ150BMT KLIP-LOK MAXIMA: 0.42, 0.48 & 0.60mm
LengthsLengths are custom cut. Check
supplier.KLIP-LOK 700HS is also available in long lengths with our on-site rollforming capability.Contact your sales representative for details.
Mass (COLORBOND)
KLIP-LOK MAXIMA: BMT 0.42mm: 4.34 kg/m2
BMT 0.48mm:4.91 kg/m2
BMT 0.60mm: 6.06 kg/m2
TolerancesLength: + 0mm, – 15mmWidth: + 4mm, – 4mm
Minimum roof pitchBMT 0.42: 2 degrees Other BMT: 1 degree
FinishesA range of COLORBOND®
steel colours and unpainted ZINCALUME® steel
COLORBOND® Metallic is also available.
Number of clips Number of clips = (number of
Materials compatibility, standards & testingSee Page 1.
LYSAGHT
KLIP-LOK accessories (availability as per products, shown above)LYSAGHT
UnderlapOverlap
770mm cover31mm
KLIP-LOK MAXIMA clip(For KLIP-LOK MAXIMA)
KLIP-LOK MAXIMA
ProductAvailability
8 LYSAGHT Product Catalogue – 2010 Edition
LONGLINE 305 (Subject to enquiry in Qld, SA & W.A.)
LONGLINE 305® is a long-standing favourite that accentuates clean straight lines with narrow ribs and smooth pans.
This is a very versatile profilethat can be tapered in its width (see below).
Base materialsSteel grade: G300Coating: AZ150BMT: 0.70 mmTT
LengthsLengths are custom cut. Check
supplier.
Mass (COLORBOND)BMT 0.70 mm: 9.81 kg/m2
TolerancesLength: + 0mm, – 15mmWidth: + 4mm, – 4mm
Minimum roof pitch1 degree (1:60)
FinishesA limited range of COLORBOND®
steel colours and unpainted ZINCALUME® steel.
Materials compatibility, standards & testingSee Page 1
Made in NSW.
Top fixing clip
Clip for LONGLINE
LONGLINE 305 Tapered (Subject to enquiry in Qld, SA, W.A.)
LYSAGHT
LYSAGHT
Standard width(cover 305 mm)
Width reducedby approx. 12.5%
Width reducedby approx. 25%
LONGLINE 305 tapered
Remember
Accessories
Cappings
Curved flashings
Flashings
Fasteners
Insulation
Rainwater goods
Translucent sheeting
305mm cover
48mm
We can taper LONGLINE 305 in its width to produce a sheetthat lends itself to a wide rangeof roof designs. The taper can bbe left-hand or right-hand (please seek advice upon ordering). You should seek advice on theYYavailable tapers for long spans,minimum lengths and highloadings.
ProductAvailability
ProductAvailability
LYSAGHT Product Catalogue – 2010 Edition 9
Roof
ing
Remember
Accessories
Cappings
Curved flashings
Flashings
Fasteners
Insulation
Rainwater goods
Translucent sheeting
LYSAGHT SLL PANDEK® is a contemporary-looking trapezoidal profile which isideal where a stronger, boldermore modern corrugated appearance is required. Userto specify roof or wall use.
Base materialsSteel grade: G550Coating: AZ150BMT: 0.42 & 0.48mmTT
LengthsLengths are custom cut. Check
supplier.
Mass (COLORBOND)BMT 0.42mm: 4.74 kg/m2
BMT 0.48mm: 5.57 kg/m2
TolerancesLength: + 0mm, – 15mmWidth: + 4mm, – 4mm
Finishesrange of COLORBOND® steel
colours and unpainted ZINCALUME steelFor 0.48mm, COLORBOND®
to enquiry. For 0.42mm,COLORBOND® stainless is
Minimum roof pitch3 degrees (1:20)
Materials compatibility, standards & testingSee Page 1
SPANDEKLYSAGHT
LYSAGHT
700mm cover
24mm
LYSAGHT SLL PANRIB® claddingsystem provides the benefits of long spanning, pierced-
rainwater carrying capacity.
All overlapping ribs havespecially formed capillarygrooves to prevent waterentering at the side laps.
It has been designed forcommercial and industrial applications where long span and fast installation
Each sheet requires only four (4)fasteners per square metre, so installation is very fast and lesscostly.
Minimum order quantities apply.
Base materials Steel grade: G550Coating: AZ150
Stainless Steel AISI/ASTM TypeTT430; UNS No.:S43000BMT: 0.42mm or 0.48mm.TT
Lengths
Lengths are custom cut. Check
supplier.
Mass (COLORBOND)
0.42 mm 4.69 kg/m2
0.48 mm 5.31 kg/m2
Tolerances
Length: + 0mm, – 15mm Width: + 4mm, – 4mm
Minimum roof pitch
BMT 0.42: 2 degrees (1:30)BMT 0.48: 1 degree (1:50) ColoursA range of COLORBOND®
steel colours and unpainted ZINCALUME® steel.
Materials compatibility,standards & testingSee Page 1
SPANRIB (Subject to enquiry in Qld & NSW)
ProductAvailability
ProductAvailability
820mm cover
48mm
10 LYSAGHT Product Catalogue – 2010 Edition
TRIMDEK
LYSAGHT TRIMDLL EK® is a stylish, ribbed profile with subtle flutingin the pans to provide strength and long spanning capabilities. Equally suitable for domestic, industrial and commercialapplications.
See also LYSAGHT TRIMLL WAWW LLfor wall cladding applications.
Base materialsSteel grade: G550Coating: AZ150BMT: 0.42 & 0.48mmTT
LengthsLengths are custom cut. Check
supplier.
Mass (COLORBOND)BMT 0.42: 4.35 kg/m2
BMT 0.48: 4.96 kg/m2
TolerancesLength: + 0mm, – 15mmWidth: + 4mm, – 4mm
Finishesrange of COLORBOND® steel
colours and unpainted ZINCALUME steelCOLORBOND Metallic is
enquiry.COLORBOND Stainless is
enquiry.
Minimum roof pitch2 degrees (1:30)
Materials compatibility, standards & testingSee Page 1
LYSAGHT
Remember
Accessories
Cappings
Curved flashings
Flashings
Fasteners
Insulation
Rainwater goods
Translucent sheeting
762mm cover
29mm
ProductAvailability
LYSAGHT Product Catalogue – 2010 Edition 11
Roof
ing
ROOFTRAKROOFTRAK® provides a safe and stable surface for incidental access on ‘flat’ roofs. It may be installed parallel or at 90° to the ribs of roofing sheets.
There are male-male and male-female planks, as well as blanking plates, support and end plate brackets.
If you want to use ROOFTRAK 450, check that your regulatory authority allows this width because it is narrower than the minimum provided for in AS-1657—1992.
Supplied in kitsROOFTRAK is supplied in kits that include
DimensionsThe basic ‘plank’ nominally
is configured as:
ROOFTRAK 450 (two planks = 450mm wide); or
ROOFTRAK 675 (three planks = 675mm wide).
Lengths
MaterialZinc-coated steel to AS1397,G300, Z450 (300 MPa minimum yield stress, 450 g/m2 minimum coating mass). BMT = 1.2mm
ComponentsA = Plank (male-male) standard lengths 3m* or 6m*B = Plank (male-female) standard lengths 3m* or 6m*C = End Plate (Blanking plate)D = Support bracketE = L bracketF = Universal Support bracket* 3m = 3.018m and 6m = 6.073m
LYSAGHT
Male-male plank Male-female plank65
mm
65 m
m
225 mm(nominal)
225 mm(nominal)
Kit Description
ROOFTRAK 675
ROOFTRAK 675
ROOFTRAK 450
ROOFTRAK 450
ROOFTRAK 450
ROOFTRAK 450
ROOFTRAK 450
ROOFTRAK 450
ROOFTRAK 450
ROOFTRAK 675
ROOFTRAK 675
ROOFTRAK 675
ROOFTRAK 675
ROOFTRAK 675
F
RT450 shown. For RT675, add a 2nd male-female plank.
ProductAvailability
12 LYSAGHT Product Catalogue – 2010 Edition
EASYCLAD (Subject to enquiry in WA)
It's called EASYCLAD® becauseit's easy to use and install on walls, soffit linings, ceilings, infillpanels and screens. The profile provides the illusion of timbersiding, with the strength of steel.It is not intended for roofing.
Simple (CD40) clips are used for
Subsequent sheets are nailed orscrewed. There is a wide range of trim sections.
Base materialsSteel grade: G550Coating: AZ150BMT: 0.42 mmTT
LengthsLengths are custom cut. Check
supplier.
Mass (COLORBOND)4.5 kg/m2
TolerancesLength: + 0 mm, – 15 mm Width: + 3 mm, – 3 mm
FinishesA range of COLORBOND®
steel colours and unpaintedZINCALUME® steel.
Materials compatibility, standards & testingSee Page 1
Made in NSW.Available as fluted product asstandard. Unfluted is available on request.
EASYCLAD TRIMSCustom sections can be madeto order.
LYSAGHT
CD5 External corner trim
28
28
28
28
CD24 Internal corner CD23 External corner
C
C
38
38 38
38
CD6 Internal corner CD5 External corner
C
C
Remember
Accessories
Cappings
Curved flashings
Flashings
Fasteners
Insulation
Rainwater goods
Translucent sheeting
300 mm cover
19 mm
2PF 300
ProductAvailability
LYSAGHT Product Catalogue – 2010 Edition 13
Wal
ling
14 LYSAGHT Product Catalogue – 2010 Edition
LYSAGHT MULL LTILL CLAD® is a walling profile with a small trapezoidal rib. Its most common applications are as walls of sheds and garages.
Base materialsSteel grade: G550Coating: AZ150BMT: 0.35 & 0.42mmTT
LengthsLengths are custom cut. Check
supplier.
Mass (COLORBOND)BMT 0.35mm: 3.25 kg/m2
BMT 0.42mm: 3.9 kg/m2
TolerancesLength: + 0mm, – 10mmWidth: + 4mm, – 4mm
Finishesrange of COLORBOND®
steel colours and unpainted ZINCALUME steelFor 0.42mm BMT COLORBOND®
stainless is also available
Materials compatibility,standards & testingSee Page 1
MULTICLAD (Subject to enquiry in WA)LYSAGHT
Remember
Accessories
Cappings
Curved flashings
Flashings
Fasteners
Insulation
Rainwater goods
Translucent sheeting
840 mm cover
12 mm
ProductAvailability
EH300
EASYCLAD EH300® is used for walls, soffit linings, ceilings, infill panels and screens. It is not intended forroofing. It is available onlyin the Northern Territory.TT
The trims available in theNorthern Territory are CTT D1, CD4,CD6 AND CD27.
Base materialsSteel grade: G300Coating: AZ150
BMT: 0.55 mmTT
LengthsLengths are custom cut. Check
supplier.
Mass (COLORBOND)5.8 kg/m2
TolerancesLength: + 0 mm, – 15 mm
Width: + 3 mm, – 3 mm
FinishesA range of COLORBOND®
steel colours and unpaintedZINCALUME® steel.
Materials compatibility, standards & testingSee Page 1Made in Darwin.
LYSAGHT
300 mm cover
14 mmProduct
Availability
LYSAGHT Product Catalogue – 2010 Edition 15
ProductAvailability
MINI ORB
MINI ORB® is a corrugated sheet with reduced height of corrugation to the more traditional CUSTOM ORB profile. It is suitable for interior and
or curved surfaces; with the corrugations running vertically or horizontally.
This product is not suitable for roofing.
Base materialsSteel grade: G550Coating: AZ150BMT: 0.42 & 0.48mm (NSW 0.48mm by request only) (NSW & Qld 0.48mm metallic only available) (0.48mm n/a in SA)
LengthsLengths are custom cut. Check
supplier.
Mass (COLORBOND)BMT 0.42mm: 3.97 kg/m2
BMT 0.48mm: 4.51 kg/m2
(0.48mm n/a in VIC)
TolerancesLength: +0mm, – 15mm Width: +2mm, – 2mm
Finishes A range of COLORBOND® steelcolours and unpainted ZINCALUME® steelDouble-sided 0.35mm COLORBOND® steel available on request.
Materials compatibility, standards & testingSee Page 1
MINI ORB TRIMS
Custom sections can be made to order. (T
LYSAGHT
25
15 15
20 20
48
12
12
1833
20
28
28
38
38
28
28
38
38
CD20 Butt joint trim-Top hat
CD6 Internal corner CD5 External cornerCD22 Edge trim
CD21 Butt joint trim-Overlap CD24 Internal corner CD23 External corner
(Subject to enquiry in SA)
C
C
C
C
C
C
C= coloured face
28
22
17 15
28CD3 Fascia to soffit section CD5 External corner trim
3815
20
22
CD27 Fascia to soffit section
25
2810
28CD4 Feature section soffit
820mm cover
6mm
Wal
ling
16 LYSAGHT Product Catalogue – 2010 Edition
LYSAGHT TRIMLL WAWW LL®
has trapezoidal ribs andpans that match LYSAGHTLLTRIMDEK. It is used forwalls, primarily on sheds.
Sheet coverage is the same as that of LYSAGHT TRIMDLL EK.
Base materialsSteel grade: G550Coating: AZ150BMT: 0.35mmTT
LengthsLengths are custom cut. Check
supplier.
Mass (COLORBOND)BMT: 0.35 mm: 3.60 kg/mTT 2
TolerancesLength: + 0 mm, – 10 mmWidth: + 4 mm, – 4 mm
FinishesA range of COLORBOND®
steel colours, and unpaintedZINCALUME steel.Limited colour range in W.A.
Materials compatibility,standards & testingSee Page 1
TRIMWALLLYSAGHT
762 mm cover
29 mm
ProductAvailability
PANELRIB
LYSAGHTLL PANELRIB® is a lightlyfluted wall cladding or ceiling
straight or curved surfaces.
Base materialsSteel grade: G550Coating: AZ150BMT: 0.35 & 0.42 mmTT
LengthsLengths are custom cut. Check
supplier.
Mass (COLORBOND)BMT 0.35 mm: 3.2 kg/m2
BMT 0.42 mm: 3.8 kg/m2
TolerancesLength: + 0 mm, – 15 mm Width: + 0 mm, – 4 mm
Finishesrange of COLORBOND® steel
colours and unpainted ZINCALUME steelFor 0.42 mm, COLORBOND®
stainless is also available
Materials compatibility,standards & testingSee Page 1
LYSAGHT
850 mm cover
4 mm
ProductAvailability
Remember
Accessories
Cappings
Curved flashings
Flashings
Fasteners
Insulation
Rainwater goods
Translucent sheeting
LYSAGHT Product Catalogue – 2010 Edition 17
WALLCLAD
LYSAGHT WALLCLAD® is a walling product to compliment LYSAGHT CUSTOM ORB andLYSAGHT CUSTOM BLUE ORB.
The sheet cover chart matches that of LYSAGHT CUSTOM ORB.
Base materialsSteel grade: G550Coating: AZ150BMT: 0.35mm
LengthsLengths are custom cut. Check
supplier.
Mass (COLORBOND)3.67 kg/m2
TolerancesLength: + 0 mm, – 10 mm Width: + 4 mm, – 4 mm
FinishesA range of COLORBOND® steelcolours and unpainted ZINCALUME steel.
Materials compatibility, standards & testingSee Page 1
LYSAGHT
762 mm cover
16 mm
WeatherboardLYSAGHT
LYSAGHT Weatherboard is a walling product that matches traditional weatherboard.
For lengths over 6 m, contact your local BlueScope Lysaght office.
Base materialsSteel grade: G550Coating: AZ150BMT: 0.42 mm
LengthsLengths are custom cut. Check
supplier.
Mass (COLORBOND)4.15 kg/m2
TolerancesLength: + 5 mm, – 5 mm Width: + 0 mm, – 4 mm
Finishesrange of COLORBOND® steel
colours and unpainted ZINCALUME steel.
Materials compatibility, standards & testingSee Page 1
ProductAvailability
ProductAvailability
Wal
ling
18 LYSAGHT Product Catalogue – 2010 Edition
Standard flashings & cappingsLYSAGHT
70
200
10
20160
New South WalesBarge cappingCUSTOM ORB & BLUE ORBCode: BCCO
TRIMDEK & SPANDEKCode: BCTDSD
KLIPLOKCode: BCKLQR
70
190
10
30120
70
180
10
40120
Barge rollCode: BR55
50dia.
2400 mm length only
Ridge capping*Nominate roof pitch
CUSTOM ORB & BLUE ORBCode: RCCO
TRIMDEK & SPANDEKCode: RCTDSD
KLIPLOKCode: RCKLQR
CUSTOM ORB & BLUE ORBCode: RC2
100 18020
160
100 17030
120
100 16040
120
10
230140 20
*Nominate angle
10
220140 30
10
210
deg˚
140 40
190
50 160 20
2400 mm length only
Barge roll cappingCode: BRCAP
Spear point
180180
30 30120˚
170170
30 30120
160160
40 40120
50
127
19300
127
19
Tile flashingCUSTOM ORB & BLUE ORBCode: TFCO
TRIMDEK & SPANDEKCode: TFTDSD
KLIPLOK & INTEGRITY 890Code: TFKLQR
Apron flashingCUSTOM ORB & BLUE ORBCode: AFCO
TRIMDEK & SPANDEKPPCode: AFTDSD
KLIPLOK & INTEGRITY 890Code: AFKLQR
INTEGRITY 820Code: AFSR
Apron flashingCUSTOM ORB & BLUE ORBCode: AFCO
TRIMDEK & SPANDEKCode: AFTDSD
KLIPLOK & INTEGRITY 890Code: AFKLQR
2020
180180
140210 210
145145
145
545
Valley flashingValley flashingCode: VF
Ribbed valleyCode: RV
Structural valleyCode: SV
Valley supportCode: VS
Barge gutter
Code: BG
deg˚
deg˚
120˚
120˚
120˚
120˚
120˚
120˚
berRememb
A riesccesso
Gutters
ndardNon-stansflashings
FastenersFasteners
ProductAvailability
ProductAvailability
LYSAGHT Product Catalogue – 2010 Edition 19
LYSAGHT Standard flashings & cappings
25 25120
120
50
310
ProductAvailability
ProductAvailability
Rain
wat
er G
oods
20 LYSAGHT Product Catalogue – 2010 Edition
Standard flashings & cappingsLYSAGHT
530 or 770 mm wide
SPANDEK & TRIMDEK
SPANDEK & TRIMDEK
Remember
Accessories
Gutters
Non-standardflashings
Fasteners
ProductAvailability
ProductAvailability
LYSAGHT Product Catalogue – 2010 Edition 21
Non-standard flashings, cappings & gutters
A
B C
D
E
F
G HA
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
C
C
C
C
C
C
C
C
C
C
C
C
C
D
D
D
D
D
D
D
D
D
D
E
E
E
Profile typesType 1 (CF1)
Type 2 (CF2)
Type 3 (CF3)
Type 4 (CF4)
Type 5 (CF5)
Type 6 (CF11)
Type 7 (CF12)
Type 8 (CF13)
Type 9 (CF14)
Type 10 (CF15)
Type 11 (CF31)
Type 12 (CF32)
Type 13 (CF33)
Type 14 (CF35)
Order requirementsOn a sketch show1. Profile type2. Colour (or ZINCALUME
steel, or GALVABLL OND if notCOLORBOND steel)
3. Side on which colour is to be (use letters shown below)
4. Dimensions (use lettersshown below)
5. Angles on all bends that are not 90 degrees
6. Quantity and lengths
PreliminaryCheck with your localBlueScope Lysaght office for:
1. Available girth range2. Available colours3. Profiles not shown4. Maximum lengths5. Lead times6. How to handle
tapered flashings
LYSAGHTThis page shows some non-standard profiles. Please ask your local LYSAGHTLL office for other options.
egnarhtriG )mm(
00600105700200900300010040021005
Order example1. Profile type 5 (CF5)
2. Wilderness
3. Colour on ‘B’ side
4. A = 40, B = 80, C = 18
5. Angle B–C = 135 degrees
6. 4 of 2750 mm
ProductAvailability
Rain
wat
er G
oods
22 LYSAGHT Product Catalogue – 2010 Edition
NOVALINE® fascia systemLYSAGHT NOVALINE® is a fascia system that integrates with most of our gutters. It comprises:
The fascia A metal fixing bracket One of many gutters A spring clip that clips the gutter to the fascia
An overstrap that adds support to the gutter
NOTE: In WA a NOVALINE REBATE fascia is also available.
AvailabilityNOVALINE fascia is available in all states, though the Western Australian fascia has a different profile, and the following restricted accessories:
External and internal corners Spring clips Stop ends (End closer) Splice plates
Compatible guttersEMLINEQuad 115 Hi-/Lo-FrontQuad 125Quad 150
Square Bead QuadTRIMLINELYSAGHT Ogee
RANCELINEColonial1/4 round
FinishesCOLORBOND® steel colours
LYSAGHT
NOVALINE fascia accessories
(45º not in NSW)
AbbreviationsCB = COLORBOND® colours
on ZINCALUME® steelGB = GALVABOND® steel
unpaintedZL = ZINCALUME® steel
unpainted
Not all NOVALINE fascia accessories are available in all markets. Consult with your local distributor for availability in your region.* Multi purpose fascia bracket can be bent 90º to attach to a wall.
18mm
35mm
185mm
StandardNovaline
RebatedNovaline(WA only)
20mm
37mm
176mm
101mm
32mm
NOVALINE fascia coverLYSAGHT
35
177
NOVALINEfascia cover
Put a bright new surface onto your tired old fascias.
The NOVALINE fascia cover has the ability to cover warped or weathered timber, peeling paint or discoloured wood so the fascia appears smooth and attractive.
NOVALINE fascia covers are designed to go over your existing fascia boards, so all these unattractive problems are totally concealed.
They are compatible with most NOVALINE fascia accessories and will mount the same range of gutters.
AvailabilityVictoria only
FinishesCOLORBOND® steel colours
ProductAvailability
ProductAvailability
ProductAvailability
RebateNOVALINEfascia
NOVALINEfascia
LYSAGHT Product Catalogue – 2010 Edition 23
EMLINE gutter
LYSAGHTLL EMLINE®
gutter is concealed-fixed,and is compatible with NOVALINE fascia.
It is available slotted orunslotted.
BMT = 0.42 mm
A range of COLORBOND® coloursis available.
EMLINE capping is available fortrimming roof edges at barges.
LYSAGHT TRIMLL LINE® gutteris concealed-fixed, and iscompatible with NOVALINEfascia. It is available slotted or unslotted. BMT = 0.42 mm. A range of COLORBOND®
colours is available.
Dimensions in NSWA = 73 mm (nominal)B = 117 mm (nominal)C = 124 mm (nominal)
Note: Availability in NSW issubject enquiry.
Dimensions in Victoria &TasmaniaA = 72 mm (nominal)B = 116 mm (nominal)C = 124 mm (nominal)
Dimensions in QldA = 70 mm (nominal)B = 116 mm (nominal) C = 124 mm (nominal)
LYSAGHT
TRIMLINE gutterLYSAGHT
140
mm
89 m
m
125 mm
140
mm
89 m
m
125 mm
A
C
B
Remember
Accessories
Downpipes
Flashings
Fasteners
AbbreviationsCB = COLORBOND® colours
on ZINCALUME® steelGB = GALVALL BOND® steel
unpaintedZL = ZINCALUME® steel
unpainted
TRIMLINE gutter accessories
TRIMLINE capping Overstrap(Not available in NSW) ZLCB & ZL
Stop endCB & ZL
GP internal bracketZL
30mm
124mm
125mm
Capping
EMLINE gutter accessories
Emline capping OverstrapCB & ZL ZL
Stop endCB & ZL
GP internal bracketZL
30mm
140mm
125mm
Capping
ProductAvailability
ProductAvailability
Also available Northern NSW
Rain
wat
er G
oods
24 LYSAGHT Product Catalogue – 2010 Edition
SHEERLINE gutter
LYSAGHT SHLL EERLINE® gutteris concealed-fixed, and is available slotted or unslotted. Itis favoured by some, for high-profile roofing (e.g. KLIP-LOK)laid at low pitches. Particularlygood in home improvement applications.BMT = 0.42mm (Vic. & Tas.)TTBMT = 0.50mm (NSW)BMT = 0.55mm (NSW, SA & NT)
Standard and high-gloss COLORBOND® steelcolours are available.
The slotted product is notavailable in Western Australia.
SHEERLINE capping is available for trimmingroof edges at barges.
Dimensions other than inSouth or West AustraliaA = 81 mm (nominal)B = 141 mm (nominal)C = 124 mm (nominal)
Dimensions in South AustraliaA = 72.5 mm (nominal) B = 141 mm (nominal) C = 124 mm (nominal)
Western AustraliaStock lengths are 7 metres, or custom cut lengths up to 8metres.Finishes: COLORBOND® andunpainted ZINCALUME®.A=83mm (nominal)B=140mm (nominal)C=127mm (nominal)
LYSAGHT
A
C
B
SHEERLINE gutter accessories
Capping General purpose bracket SGCI gutter clip ZL & CB ZL ZLNot available in WA
External end stop Internal end stop ZL & CB ZL & CB Fascia style No flutes in WA product Not available in WA Sold in pairs in NSW Sold in pairs in NSW
Remember
Accessories
Downpipes
Flashings
Fasteners
AbbreviationsCB = COLORBOND® colours
on ZINCALUME® steelGB = GALVALL BOND® steel
unpaintedZL = ZINCALUME® steel
punpainted
(SHEERLINE is notavailable with a return in SA)
Also available:J strap or overstrap; Ext mitre.
These accessories are also suitable for CUSTOM ORB,CUSTOM BLUE ORB, SPANDEK and TRIMDEK.
ProductAvailability
LYSAGHT Product Catalogue – 2010 Edition 25
QUAD 150 & 175 guttersLYSAGHT
Quad 150 and 175 are our traditional gutters in two widerprofiles. Quad 150 is compatible with NOVALINE fascia. BMT = 0.42mm.
They are available in COLORBOND® steel colours and unpainted ZINCALUME® steel.
Quad 150A = 75 mm (nominal) B = 74 mm (nominal) C = 150 mm (nominal)Custom cut lengths are availableto 8000 mm.
Quad 175A = 103 mm (nominal)B = 96 mm (nominal) C = 175 mm (nominal)Custom cut lengths are availableto 8000 mm.Available subject to enquiry.
Overstrap Internal corner:Used with all Quad gutters except 175 Pressed steelZL Used with all Quad gutters
GA, ZL & CB
Stop end plate: LH or RHUsed with all Quad guttersZL & CB
Quad gutter accessories
Return stop end: LH or RH Full stop end: LH or RH Used with Hi-front Used with 150, 175 & Lo-front GA, ZL & CB GA, ZL & CB
External corner:Pressed steelUsed with all Quad guttersZL & CB
A
C
B
1 zinger onlyin Quad 175
Remember
Accessories
Downpipes
Flashings
Fasteners
AbbreviationsCB = COLORBOND® colours
on ZINCALUME® steelGB = GALVALL BOND® steel
unpaintedZL = ZINCALUME® steel
punpainted
Spike bracketUsed with 150 & 175GALVANISED & POWDER COATED
Queensland only
Internal GP bracket Used with all Quad gutters ZL
ProductAvailability
Quad 175Subject to
enquiry
Rain
wat
er G
oods
OGEE gutterLYSAGHT
External corner: diecast Internal corner: diecast OGEE overstrap Internal GP bracket OGEE external bracket Stop end:90 & 45diecast 90 & 45diecast LH or RHPC on diecast & unpainted PC on diecast & unpainted ZL ZL CB CB (Not available in WA)
OGEE gutter accessories
LYSAGHT OGLL EE gutters offera distinctive look for anyhome, and is compatible with NOVALINE fascia.
Available in COLORBOND®
steel colours and unpainted ZINCALUME® steel.
Dimensions in SA and Vic.A = 64 mm (nominal)B = 98 mm (nominal)C = 145 mm (nominal)
LYSAGHT OGLL EE is availableslotted in S.A. .
A
C
B
26 LYSAGHT Product Catalogue – 2010 Edition
QUAD 115 gutters: Hi-front (& Lo-front NSW only)
LYSAGHT
Quad 115 is also a traditionalgutter, and is compatible with NOVALINE fascia. Quad 115Hi-front gutter better obscuresthe end of low-to medium-height roofing profiles from view. BMT =0.42 mm. Standard COLORBOND®
STEEL colours are available.
In some states this profile is available slotted to prevent water overflowing into eaves duringheavy rainfall.
In Victoria, Quad 115 Hi-frontis also known simply as Quad gutter. N/A in W.A.
The Queensland Quad 115 Hi-front gutter is fluted.
(Quad 115 is availableslotted in SA & NSW)
Hi-front DimensionsA = 62 mm (nominal)B = 90 mm (nominal)C = 115 mm (nominal)
Lo-front Dimensions (NSW)A = 65 mm (nominal)B = 70 mm (nominal)C = 115 mm (nominal)
Remember
Accessories
Downpipes
Flashings
Fasteners
AbbreviationsCB = COLORBOND® colours
on ZINCALUME® steelGB = GALVALL BOND® steel
unpaintedPC = Powder coated steelZL = ZINCALUME® steel
unpainted
External corner:Pressed steelUsed with all Quad guttersZL & CB
Not available in NSW
Quad gutter accessories
Internal (GP) bracket External T- head bracketUsed with all Quad gutters ZINCALUME ZINCALUME & COLORBOND
150 only is available in Qld.
Internal corner: External corner:Diecast 90 & 45 Diecast 90 & 45
COLORBOND COLORBOND
Stop end plate: LH/ RH paiUsed with all Quad guttersZINCALUME & COLORBOND
ProductAvailability
ProductAvailability
OverstrapUsed with all Quad gutters ZINCALUME
LYSAGHT Product Catalogue – 2010 Edition 27
Half round gutter is a simple profile, supported by external brackets. Ideal for tropicalenvironments with huge water carrying capacity. Self cleaningwith every shower of rain.Available in ZINCALUME®,COLORBOND® & GALVALL BOND®
steel.A similar product is availablein Nth Qld, S.A. and NSW.
QueenslandAccessories include mitred corners, fixing brackets and stop ends.
Northern TerritoryA segmented Half Roundgutter is available.
Easy fix accessories
bracket
Available subject to enquiry.
In NSW, similar product sizes available are:x = 100, 125, 150, 200, 250, 300mmAvailable in 3000mm and 6000mmlengths only, subject to enquiry.Available in ZINCALUME®
& COLORBOND® steel
HALF-ROUND gutterLYSAGHT
Remember
Accessories
Downpipes
Flashings
Fasteners
AbbreviationsCB = COLORBOND® colours
on ZINCALUME® steelGB = GALVALL BOND® steel
unpaintedZL = ZINCALUME® steel
unpainted
152 mm x
The curved base on LYSAGHTLLgutter prevents build up of water and dirt, allowing the gutter to clean itself with every shower of rain.A similar product is available in S.A. and NSW subject to enquiry.
Queensland & VictoriaAccessories include mitredcorners, fixing brackets and stopends. Available in ZINCALUME®,COLORBOND® & GALVALL BOND®
steel.
Easy fix accessories
FLAT BACK gutter136 mm
The unique mounting bracketprovides quick, easy solution to roof overhang. Simply drill ahole and fit the gutter using a bracket and approved fastener.
FITFAST gutter accessoriesFFare designed to make installation quick and easy.
QueenslandAccessories include fixingbrackets and stop ends. Available in most standardCOLORBOND® steel colours.
Easy fix accessories
used with FITFAST gutterFF
FITFAST gutterLYSAGHT
20
125
140
69
150 mm
Victoria dimension is 150mmnominal.
Queensland dimensions New South Wales dimensions
SGCI gutter clipZL
ProductAvailability
ProductAvailability
ProductAvailability
Rain
wat
er G
oods
CUSTOM WA guttersLYSAGHT
28 LYSAGHT Product Catalogue – 2010 Edition
RANCELINE gutterCOLONIAL gutter
Standard COLORBOND® steelcolours are available. Also available stotted.
LYSAGHT
LYSAGHT
65
90
98
These three gutters are made only in Western Australia.BMT=0.55 mm. They are available in unpainted ZINCALUME®, COLORBOND®
colours, COLORBOND®
STAINLESS, COLORBOND®
METALLIC, copper, aluminium and hard zinc. Maximum length is 8000 mm.
AbbreviationsCB = COLORBOND® colours
on ZINCALUME® steelGB = GALVABOND® steel
unpaintedZL = ZINCALUME® steel
unpainted
6190
90
LYSAGHT Colonial gutter(new wider base)
LYSAGHT Ranceline gutterLYSAGHT Ranceline slottedLYSAGHT Ranceline patio
ProductAvailability
ProductAvailability
LYSAGHT Product Catalogue – 2010 Edition 29
Downpipes: Square & rectangular
TasmaniaCustom cut available.
Lengths2400
BMT0.60
FinishZL & CB
Dimensions75 x 5075 x 75
100 x 50100 x 75
100 x 100125 x 100150 x 75
150 x 100
LYSAGHTdownpipes are compatiblewith all gutter sections,including those used with the NOVALINEfascia system.
QueenslandWhole length is
tapered.
Lengths100 x 75:
1600,1800,24002700 & 3000
All other sizes: custom cut
BMT0.400.55
FinishGB, ZL & CB
Dimensions
0.40 BMT100 x 50100 x 75
100 x 100
0.55 BMT100 x 50100 x 75
100 x 100125 x 100150 x 100150 x 150
Other sizes made to order.
WAAvailablein copper,
COLORBOND®,ZINCALUME® &
aluminium.
Lengths1800 & 2400
BMT0.40 & 0.55
FinishZL & CB
Dimensions75 x 5095 x 45
100 x 50100 x 75
Other sizes made to order.
SA & NT
Lengths1800
BMT0.400.55
FinishGB, ZL & CB(Some sizes available in
CB Ultra)
Dimensions50 x 5075 x 5075 x 75
100 x 50100 x 75
100 x 100100 x 125100 x 150
NSW
Lengths1800 & 2400
BMT0.40 & 0.55
FinishZL & CB
BMT & Dimensions
0.40 BMT100 x 50100 x 75
0.55 BMT100 x 100
Other sizes available on
request.Contact local
branch for availability.
Victoria
Lengths1800 & 2400
FinishCB: 0.55
ZL & GB:0.40 & 0.55
BMT & Dimensions
0.40 BMT75 x 5075 x 75100 x 50100 x 75
0.55 BMT100 x 100150 x 100144 x 144150 x 150
Downpipes
Finish ZL ZL ZL & CB GB , ZL & CB ZL ZL
PopsAlso known as nozzles in New South Wales and drops in Queensland.
NSW100 x 50100 x 75100 x 100
Victoria75 x 5075 x 75100 x 50100 x 75100 x 100150 x 100150 x 100144 x 144150 x 150
QueenslandUniversal100 x 50100 x 75
100 x 100125 x 100150 x 100150 x 150
Other sizes made to order.
SA & NT50 x 5075 x 5075 x 75
100 x 50100 x 75
100 x 100125 x 100150 x 100
Specify loose or fitted to gutter
WA75 x 5095 x 45
100 x 50100 x 75
Other sizes made to order.
Tasmania75 x 50
100 x 50100 x 75
100 x 100125 x 100150 x 100
AbbreviationsCB = COLORBOND® colours
on ZINCALUME® steelGB = GALVABOND® steel
unpaintedZL = ZINCALUME® steel
unpainted
ProductAvailability
ProductAvailability
Rain
wat
er G
oods
30 LYSAGHT Product Catalogue – 2010 Edition
Elbows (95°) & Shoes (45°)Also known as bends in New South Wales and Queensland
NSWRefer Service
Offer
FinishRefer Service
Offer
Vic.100 x 50100 x 75
100 x 100
FinishZL, GB & CB
Qld100 x 50100 x 75
100 x 100Other sizes
made to order.
FinishZL & CB
SA & NT50 x 5075 x 5075 x 75
100 x 50100 x 75
100 x 100
Specify loose or fitted to gutter
75mm dia. tosuit PVC also
available.
FinishGB, ZL & CB
WA75 x 5095 x 45100 x 50
FinishZL & CB
Tas.75 x 50
100 x 50100 x 75
100 x 100125 x 100150 x 100
FinishZL & CB
StrapsAlso known as astragals in New South Wales and South Australia, clips in Victoria and saddle straps in Western Australia.The sizes available are the same as those shown for pops.In Victoria and Western Australia, additional sizes are available on request.
Downpipe offsets (2 piece)NSW
100 x 50100 x 75
FinishZL & CB
Vic.100 x 50100 x 75
100 x 100
FinishZL, GB & CB
Qld100 x 50100 x 75
Nominate 450 or 600 mm
eaves
FinishZL & CB
SA & NTAvailable as 2 piece
50 x 5050 x 7575 x 75
100 x 50100 x 75
100 x 100125 x 100150 x 100
FinishGB, ZL & CB
POA IN S.A..
WAAvailable
Tas.Not available
95
135
45
Elbow
Shoe
AdjustableRemember
Accessories
Downpipes
Flashings
Fasteners
AbbreviationsCB = COLORBOND® colours
on ZINCALUME® steelGB = GALVALL BOND® steel
unpaintedZL = ZINCALUME® steel
unpainted
Adjustable Length300-645mm(345 adjustment)
ProductAvailability
LYSAGHT Product Catalogue – 2010 Edition 31
Downpipes: RoundDownpipes
Tas.Custom cutavailable.
Lengths1800
BMT0.60
FinishZL & GB
DimensionsDiameter
5075
100125150
WA
LengthsFor all
diameters: 1800 tapered
75 diameter: 1800, 2400crimped
BMTFor all
diameters: 0.4075-& above: 0.40 & 0.55
Dimensions & finish
Diameter&finish50 GB60 GB
75 ZL & GB100 ZL & GB125 ZL & GB150 ZL & GBAsk for non-
standard.
Vic.
Lengths1800 & 2400
FinishZL & CB
Dimensions &BMT
0.40 BMTDiameter
50657590
0.55 BMT100125150175200225250275300
NSW
Lengths1800 & 2400
FinishZL & CB
DimensionsDiameter
7590100
Other diameters subject to enquiry.
Qld: TaperedWhole length
is tapered.
Lengths75 to 100 dia:1800 & 2400
125 to 150 dia:1800
BMT75 to 100 dia:
0.40100 to 150 dia:
0.55
FinishZL, GB & CB
DimensionsDiameter
7590100125150
Queensland:ParallelLengths
900
FinishCB
Dimensions(dia.) & BMT75 dia: 0.4090 dia: 0.40
100 dia: 0.40100 dia: 0.55125 dia: 0.55150 dia: 0.55
Other diameters made to order in
0.55 BMT.TT
SA & NT
Lengths1800
BMT0.40 & 0.55
Dimensions & finish
Diameter & finish
50 GB, ZL & CB75 GB, ZL & CB90 GB, ZL & CB
100 GB, ZL & CB
125 GB, ZL & CB
150 GB, ZL & CB
(Some sizes available in
CB Ultra) Remember
Accessories
Downpipes
Flashings
Fasteners
AbbreviationsCB = COLORBOND® colours
on ZINCALUME® steelGB = GALVALL BOND® steel
unpaintedZL = ZINCALUME® steel
unpainted
ProductAvailability
Rain
wat
er G
oods
32 LYSAGHT Product Catalogue – 2010 Edition
Pops/Nozzles/Drops
NSWDiameter (mm)
7590100
Universal nozzles also available in
NSW to suit 100 x 75mm
or 100 x 90mm.
Finish
ZL
VictoriaDiameter (mm)
50657590100125150200
FinishZL & GB
QueenslandDiameter (mm)
Universal7590
100125150
FinishZL & CB
SA & NTDiameter (mm)
50-75-90100-125-150
Specify loose or fitted to gutter.
Limited colours.
FinishGB, ZL, CB
WADiameter (mm)
50-65-70100
Overflows: 25 mm dia.x 100 longGB only
Ask for non-standard.
FinishZL
TasmaniaDiameter (mm)
50-75100-150
FinishZL
Elbows (95°) & Shoes (45°)Also known as bends in New South Wales and Queensland
NSWRefer to NSWService Offer.
VictoriaDiameter
50657590100
FinishZL, GB & CB
QueenslandDiameter
7590
100125150
Ask for non-standard.
FinishZL, GB & CB
SA & NTDiameter
5065 (not SA)
7590 (pressed
bend diecast)100125
150 (not NT)
Limited colours.
FinishCB, ZL & GB
WADiameter
75
Ask for non-standard.
FinishZL & GB
TasmaniaDiameter
5075
100125150
FinishZL & GB
StrapsAlso known as astragals in New South Wales and South Australia, clips in Victoria and saddle straps in WA.The sizes available are the same as those shown for pops.In Victoria there is also a 170mm diameter clip.In Western Australia 75mm strapping is used (1800mm lengths).
More downpipe accessories on next page
95
135
45
Elbow
Shoe
ProductAvailability
LLYSAGHT Product Catalogue – 2010 Edition 33
Crimped bend 90 & 45 degreesNSW
Diameter7590
100
Subject toenquiry.
FinishZL & CB
Standoff bracketsSA
Diameter75-90-100125-150
unpainted
WA & NSWDiameter75 -100
Galvanised onlyNon-standard
subject to enquiry.
Chinamans hatNSW
Diameter(On short pipe)
150175200225250300350400
FinishGB
QueenslandDiameter
(On short pipe)7590
100125150175200225250300
FinishZL, GB & CB
WADiameterKnown as
cap with strap100150200
FinishGB
Downpipe offsets (2 piece).VictoriaDiameter
657590
100
FinishZL, GB & CB
NSWRefer NSW
Service Offerfor details.
FinishRefer NSW
Service Offerfor details.
WADiameter
75
FinishZL, GB & CB
SADiameter
(On short pipe)Made to order
75-100-125150-300
Other sizesavailable on
request.
FinishGB & CB
Adjustable
Remember
Accessories
Downpipes
Flashings
Fasteners
AbbreviationsCB = COLORBOND® colours
on ZINCALUME® steelGB = GALVALL BOND® steel
unpaintedZL = ZINCALUME® steel
unpainted
QueenslandDiameter
5075
Other sizesmade to order.
FinishZL & CB
450mm 450mm
150mm diameterNominate roof pitch
Available in COLORBOND®
& ZINCALUME®
WA Flumes with base
Adjustable Length450-600mm (150mmadjustment)
SADiameter50-75-90
100-125-150POA in S.A.
FinishZL, GB & CB
ProductAvailability
ProductAvailability
Rain
wat
er G
oods
34 LYSAGHT Product Catalogue – 2010 Edition
NSW
BMT0.55
Materials
coating
Dimensions2400 x 1200
Vic.
BMT0.55
Dimensions1800 x 900
1800 x 12002400 x 900
2400 x 1200
Qld
BMT0.40 & 0.55
Materials
Dimensions2400 x 1200
SA & NT
BMT0.55
Materials
DimensionsTo order
WA
BMT
Materials
Dimensions2400 x 1200
Tas.
BMT0.55
coatingAQUAPLATE
Dimensions2400 x 1200
Accessory sheet
Materials Dimensions &lengths
0.4 x 25 &0.4 x 38
1800 & 2400
0.6 x 25 &0.6 x 38
1800 & 2400
0.8 x 252400
1.0 x 252400
NSW25 x 1.0 x 100m
32 x 1.0 x 100m32 x 1.2 x 100m32 x 1.6 x 100m
38 x 1.2 x 50m
51 x 1.6 x 25m
Vic.32 x 1.2 x 100m
38 x 1.2 x 100m38 x 1.6 x 100m
Qld30 x 1.0 x 30m
32 x 1.2 x 50m32 x 1.2 x 25m
51 x 1.6 x 25m
SA25 x 0.6 x 100m51 x 1.6 x 25m
NT25 x 0.6
51 x 1.6 x 25m
Tas.25 x 1.025 x 1.225 x 1.6
32 x 1.232 x 1.6
38 x 1.238 x 1.6
51 x 1.6
Flat strips (hoop iron)
Strapping (coils)
ProductAvailability
ProductAvailability
ProductAvailability
LYSAGHT Product Catalogue – 2010 Edition 35
Silicone sealantColours
Neutral cure.Sizes
Soft zinc flashingThickness
0.7 mmLength Widths
Tools (turn-up/turn-down) & notching toolsNot all tools
are available in all areas. Refer
to your local service office
for availability.
CUSTOM ORB INTEGRITY 820
Turn down
KLIP-LOK 406
Turn down
KLIP-LOK 700 HS
Turn down
LONGLINE 305
SPANDEK
TRIMDEK
Turn down
AbbreviationsCB = ®
on ®
CU
GB = ®
SS
ZL = ®
ProductAvailability
ProductAvailability
ProductAvailability
Acc
esso
ries
36 LYSAGHT Product Catalogue – 2010 Edition
Ventilated ridges
NSW
Materials
Throat sizes
300350400450500550600
Vic
Materials
Throat sizes150225300
Stop ends
Closed top
Open top
Qld
Materials
Throat sizes
made to 900 mm
made to 600 mm
MX series
TC series
Stop ends
SA & NT
Materials
Throat sizes125150200250300350450600
Stop ends
WA
MaterialsULTRA
& SS
Throat sizes
& 600
Standard
Ranceline
Options
Tasmania
Materials
Throat sizes125150225300
Stop ends
WA ventilator ridges
LouvresAvailable Material Finish
Powdercoating
ULTRA
SizesRound
340 mm dia620 mm dia
SizesHalf-round
900 x 500
SizesOctagonal620 mm dia
Square & Rectangular
in SA
Ridge capping
Apron flashing Bird wire
Throat size
Standard Ranceline
ProductAvailability
ProductAvailability
LYSAGHT Product Catalogue – 2010 Edition 37
Box gutter bracketsVic & NSW
Construction
Materials
Width
Qld
Construction
Materials
Width
including:
SA & NT
Materials
Width
WACalled
Materials
WidthSmall: 250–400
Large: +650–1000
Box gutter sumpsVic & NSW
Materials
Size
order
Qld
Materials
Sizes
order
200 x 200300 x 300400 x 400450 x 450500 x 500550 x 550600 x 600
SA & NT
Materials
Sizes
WA
Materials
Sizes250 x 250 x 100300 x 225 x 225300 x 300 x 250375 x 225 x 225375 x 225 x 225450 x 300 x 300600 x 600 x 100
Box gutter expansion jointsQld, WA &
NSW
Materials
Lengths
Over 400mm
Adjustable
Sizes:350/400400/650
650/1000
43
300
Angle to suit roofpitch
AbbreviationsCB = ®
on ®
CU
GB = ®
SS
ZL = ®
ProductAvailability
ProductAvailability
Acc
esso
ries
38 LYSAGHT Product Catalogue – 2010 Edition
Rainwater headsNSW
Refer to the Service Offer
for details.
Vic
Materials
Sizes
order
Qld
Materials
Sizes
order
Round rainwater
made to order
Contact SA branch for
details on the full rainwater head range.
SA & NT
Materials
WA
Materials
Sizes
Flat bottom300 x 750 x 150375 x 225 x 225600 x 300 x 300
Tapered bottom250 x 200300 x 200400 x 250450 x 300600 x 450
W
D
L
WD
L
D
Transitions, roof collars & overflowsQueensland
Materials
Sizes
order
WD
L
D
W
D
L
W
D
L
W
D
L
W
L
D
AntiqueRainhead
Tapered ClassicRainhead
ClassicRainhead
Tapered BushrangerRainhead
BushrangerRainhead
Tulip Rainhead
Half Moon Rainhead
Quarter Moon Rainhead
Full Moon Rainhead
OrnamentalRainhead
ProductAvailability
ProductAvailability
LYSAGHT Product Catalogue – 2010 Edition 39
Fixed metal louvresQueensland
NSW and W.A.
Materials
Sizes
NSW & WA:
to order.
Translucent sheeting (Contact local branch for availability)
Materials
2
2 2
ColoursPolycarbonate
Fibreglass &
LengthsPolycarbonate
Fibreglass900 to 12200
Fastening
®
®
(WA only, 770 mm wide)
AbbreviationsCB = ®
on ®
CU
GB = ®
SS
ZL = ®
ProductAvailability
ProductAvailability
Weatherlok washers
Lapseal Width5075100
Thickness6 mm
Length
Diameter2032
Acc
esso
ries
40 LYSAGHT Product Catalogue – 2010 Edition
®
Ant capsQld
Materials
Sizes square200 x 200225 x 225250 x 250300 x 300
Sizes round200 diameter 250 diameter300 diameter
WA
Materials
Sizes
100 x 100225 x 225
Roof infill strips (closed cell type) and
Length915915760
406 810700HS 730
770820 890
roll roll
Width
20
Dektite® pipe flashings
CUSTOM ORB profile shownWidth
& WA
and
ProductAvailability
ProductAvailability
ProductAvailability
Complies with AS4389:1996
Mesh100 x 115 x 1.25
Roll width1800
Roll length
Roll area90 m2
in SA
Mesh150 x 150 x 1.6
Roll width1800
Roll length
Roll area90 m2
Mesh150 x 300 x 2
Roll width1800
Roll length
Roll area90 m2
Mesh150 x 300 x 3.15
Roll width900
Roll length
Roll area54 m2
LYSAGHT Product Catalogue – 2010 Edition 41
Safety mesh
Ventilators: Industrial & DomesticWind-drivenventilators
to region. Enquire on
centre.
MaterialAluminium
Finish
®
Throatdiameters
diameter in mm
Options
controlled
ProductAvailability
ProductAvailability
Acc
esso
ries
Fasteners: Screw to steel–AS3566 Class 4 (except as noted)
Coating Class 4Gauge TPI Length (mm)
Self drilling screw for thin gauge steel (with underwasher thread) with seal
13 13 4113 13 5515 15 55
Hex. head Self drilling screw with seal (part thread)
14 10 4214 10 5014 10 65
Stitching screws Hex. head with seal
10 12 20
Hex. head with 19 mm aluminium bonded washer
14 10 4214 10 5014 10 65
Zinc platedGauge TPI Length
Wafer head10 16 1610 16 22
Hex. head, no seal
8 18 1210 16 16
Coating Class 3 coatedGauge TPI Length
Wafer head
10 16 1610 16 22
Ripple Teks®
10 16 2010 16 30
® ®
Coating Class 4 Gauge TPI Length (mm)
Roofzips® Hex. head self drilling screw for steel (with underwasher thread) with seal
Hex. head self drilling screw for steel (with underwasher thread) with seal
12 14 3512 14 4512 14 68
Hex. head self drilling screw for steel (with underwasher thread) with seal (full thread)
10 16 1612 14 2014 10 42
Hex. head, no seal
10 16 1610 16 2512 14 5512 14 6512 14 7514 20 2214 10 2514 10 4214 10 50
Hex. head with 19mmaluminium bonded washer14 10 4214 10 5014 10 65
Self drilling screw with 19mmaluminium bonded washer
15 15 47
®
ProductAvailability
42 LYSAGHT Product Catalogue – 2010 Edition
Across flats Length
Hexagon sockets
Across flats Length
Phillips drive bits#2 50
Length
Magnetic bit holder75
Fastener drive tools
Fasteners: Screw to timber
Coating class 3 coatedGauge TPI Length
Hex. head with thread under washer with seal
12 11 5012 11 65
Hex. headwith seal (full thread)
10 12 2512 11 2514 10 25
Hex. head withseal (part thread)
12 11 4514 10 5014 10 65
Hex. headno seal (full thread)
10 12 2512 10 2514 10 25
Hex. head, noseal (part thread)
12 11 4512 11 5014 10 5014 10 65
®
Coating class 4 coatedGauge TPI Length
Roofzips® Hex. head Self drilling screw for steel or timber (with underwasher thread) with seal
Hex. head with thread under washer with seal
12 11 65
Hex. head with seal
12 11 2514 10 2514 10 5014 10 6514 10 7514 10 90
Hex. head, no seal (N/A in Queensland)
12 11 2514 10 2514 10 5014 10 65
Hex. head with 16 mmaluminium bonded washer
14 10 5014 10 65
Hex. head with 19 mmaluminium bonded washer
14 10 5014 10 65
Hex. head with 25 mmaluminium bonded washer
14 10 5014 10 65
®
Zinc platedGauge TPI Length
Wafer head
10 12 2510 12 45
Countersunk head (N/A in Queensland)
6 18 25
Bugle head batten
14 10 7514 10 100
ProductAvailability
LYSAGHT Product Catalogue – 2010 Edition 43
Acc
esso
ries
44 Edition
Fasteners: Cyclonic assemblies–Screw to steel
Coating class 4 coatedGauge TPI Length
For CUSTOM ORB14 10 42
For SPANDEK & TRIMDEK14 10 50
For KLIP-LOK 406 HIGH WIND14 10 65
Coating class 4 coatedGauge TPI Length
Metal Batten Teks®
for CUSTOM ORB15 15 47
Metal Batten Teks®
for SPANDEK & TRIMDEK15 15 55
Metal Batten Teks®
for KLIP-LOK 406 HIGH WIND15 15 47
Coating class 3 or 4 coatedGauge TPI Length
KLIP-LOK-700HS clip fixed to steel (0.75 - 1.0mm)12 14 20
KLIP-LOK-700HS clip fixed to steel (1.0 - 3.0mm)12 14 20
Coating class 3 or 4 coatedGauge TPI Length
KLIP-LOK-700HS clip fixed to timber - Type 17
Hex. Head
Coating class 4 coatedGauge TPI Length
Hex. head forCUSTOM ORB
Hex. head forSPANDEK & TRIMDEK
Hex. head forKLIP-LOK 406 HIGH WIND
Fasteners: Nails to timberGalvanised spiral-threaded steel nail
Fasteners: Blind rivets
Body Mandrel Dia. Grip Type Head
Fasteners: Cyclonic assemblies–Screw to timber
For fixing without cyclonic assemblies, see LYSAGHT Cyclonic Design Manual. Cyclonic assemblies are available in WA, NT and Qld.
ProductAvailability
ProductAvailability
ProductAvailability
44 LYSAGHT Product Catalogue – 2010 Edition
45 LYSAGHT Product Catalogue – 2010 Edition
LightweightPlain facing1350 x 20 m (27 m2
1350 x 60 m (81 m2
Anti-glare facing1350 x 20 m (27 m2
1350 x 30 m (40.5 m2
1350 x 60 m (81 m2
Building grade–Anti-glare1350 x 20 m (27 m2
1350 x 60 m (81 m2
HeavyweightPlain facing1350 x 20 m (27 m2
1200 x 60 m (72 m2
1350 x 60 m (81 m2
Anti-glare facing1350 x 20 m (27 m2
1350 x 30 m (40.5 m2
1350 x 60 m (81 m2
Perforated1350 x 60 m (81 m2
Gladiator wallwrap1350 x 60 m (81 m2
Thermotuff wallwrap1350 x 60 m (81 m2
MediumweightPlain facing1350 x 20 m (27 m2
1200 x 60 m (72 m2
1350 x 60 m (81 m2
Anti-glare facing1350 x 20 m (27 m2
1350 x 30 m (40.5 m2
1350 x 60 m (81 m2
Perforated1350 x 60 m (81 m2
Sisaltuff1350 x 60 m (81 m2
Insulation: Foil Tape2
2
2
2
2
2
2
2
2
2
Lightweight foil facingR1.5 1200 x 15 m (18 m2
R1.5 1200 x 20 m (24 m2
R2.0 1200 x 10 m (12 m2
R2.0 1200 x 15 m (18 m2
R2.5 1200 x 10 m (12 m2
Mediumweight foil facingR1.5 1200 x 15 m (18 m2
R1.5 1200 x 20 m (24 m2
R2.0 1200 x 10 m (12 m2
R2.0 1200 x 15 m (18 m2
R2.5 1200 x 10 m (12 m2
Heavyweight foil facingR1.5 1200 x 15 m (18 m2
R1.5 1200 x 20 m (24 m2
R2.0 1200 x 10 m (12 m2
R2.0 1200 x 15 m (18 m2
R2.5 1200 x 10 m (12 m2
R2.5 1200 x 7.5 m (9 m2
LightweightR1.2 1200 x 15 m (18 m2
R1.2 1200 x 20 m (24 m2
R1.2 1200 x 30 m (36 m2
R1.8 1200 x 10 m (12 m2
R1.8 1200 x 15 m (18 m2
R1.8 1200 x 20 m (24 m2
R2.3 1200 x 10 m (12 m2
75 mm 1200 x 20 m (24 m2
MediumweightR1.5 1200 x 15 m (18 m2
R1.5 1200 x 20 m (24 m2
R2.0 1200 x 10 m (12 m2
R2.0 1200 x 15 m (18 m2
R2.5 1200 x 10 m (12 m2
HeavyweightR1.5 1200 x 15 m (18 m2
R1.5 1200 x 20 m (24 m2
R2.0 1200 x 10 m (12 m2
R2.0 1200 x 15 m (18 m2
R2.5 1200 x 10 m (12 m2
R2.5 1200 x 7.5 m (9 m2
Insulation: Reflective foil laminate
Insulation: Building blanket with foil
Insulation: Building blanket
Insulation: Ceiling batts
Insulation: Wall batts
ProductAvailability
LYSAGHT Product Catalogue – 2010 Edition 45
Acc
esso
ries
ZEDS & CEES (Purlins & Girts) F
Lt
D
L
E B
LL
t
LYSAGHT
Above 100 size, the standard product offer is a LYSAGHTSUPAPURLIN in NSW, SA and South East Qld.Z/C30024 -Z/C40030 are available subject to enquiry in WA & NT.Z/C15010, Z/C15012, Z/C15015, Z/C20012, Z/C 25015 and Z/C30019 subject to enquiry in SA.Z/C400 sizes are only available in Queensland and are subject to enquiry and extended lead times.
LYSAGHT Zed and Cee sections are accurately roll-formed from high-strength zinc-coated steel to provide an efficient, lightweight, economical roofing and cladding support system for framed structures.
The system includes HOOK-LOK™ ll bridging, Series 300 and 350 bridging and a wide range of accessories. It is supplied ready for erection.
Material specificationsLYSAGHT Zed and Cee sections are roll-formed from GALVASPAN® steel complying with AS1397—2001. In the grades shown, the number prefixed with G indicates minimum yield stress in MPa; and the number prefixed with Z indicates minimum coating mass in g/m2.
request.
for C/Z10010 sections. Refer to local supplier.
PunchingZed and Cee sections are normally supplied with holes punched to the Australian Steel Institute(ASI) gauge lines, except in Victoria where the 150 series sections are punched to the gauge lines of the Structural SteelFabricators Association, Victoria.
Dimensions of Zeds & Cees
ProductAvailability
ProductAvailability
Z/C100 purlin Z/C purlins
75
38
1212
1.0
Available in South Australia only. Supplied unpunched.
SA Cee sectionLYSAGHT
ProductAvailability
46 LYSAGHT Product Catalogue – 2010 Edition Edition
LYSAGHT Product Catalogue – 2010 Edition 47
SUPAPURLINS
SUPAPURLINS PRODUCT RANGE
LYSAGHT
LYSAGHT SUPAPURLINS® arethe new purlin profiles that give you higher capacities and more economical solutions.
has patented SUPAZEDS® and SUPACEES®
because it is the first significant development in the field for a very long time.
SUPAZEDs and SUPACEEs areonly available in New South Wales, South Australia and S.E. Queensland as a standard product offer. Other areas are subject to enquiry.
Available in NT from SAmanufacturing site with a two week lead time.
t c u d o r P h t p e D ) m m (
s s e n k c i h T ) m m (
t l o B s t n e m e r i u q e R
e p a h S n i l r u P e m a N d n a
g n i g d i r B m e t s y S
21MedarG
8.8ro6.4
g n i g d i r B h t i w m e t s y S
/ p m a l c s d n e r o t a c o l
d e t l o b r o t e k c a r b
s d n e
0 1 0 5 1 C S / Z S 2 1 0 5 1 C S / Z S 5 1 0 5 1 C S / Z S 9 1 0 5 1 C S / Z S 4 2 0 5 1 C S / Z S
2 5 1
0 . 1 2 . 1 5 . 1 9 . 1 4 . 2
2 1 0 0 2 C S / Z S 5 1 0 0 2 C S / Z S 9 1 0 0 2 C S / Z S 4 2 0 0 2 C S / Z S
3 0 2
2 . 1 5 . 1 9 . 1 4 . 2
5 1 0 5 2 C S / Z S 9 1 0 5 2 C S / Z S 4 2 0 5 2 C S / Z S
4
4
5 2 5 . 1 9 . 1 4 . 2
9 1 0 0 3 C S / Z S 4 2 0 0 3 C S / Z S 0 3 0 0 3 C S / Z S
0 0
0 0
39 . 1 4 . 2 0 . 3
edarG61M8.8ro6.4
4*2 0 5 3 C S / Z S 0*
0
0
3 0 5 3 C S / Z S
4**4
4
2 0 C S / Z S
2**3 0 C S / Z S 04 0**3 0 C S / Z S
0 5 3 4 . 2 0 . 3
4 . 2 0 . 3 2 . 3
3. Queensland and South Australia are able to manufacture downturned lipped purlins, subject to enquiry. Consult your local BlueScope Lysaght Service Centre for advice. Extended lead times may apply.
1. Purlins marked * availability is subject to enquiry. Consult your local BlueScope Lysaght Service Centre for advice. Extended lead times may apply.2. Purlins marked ** are available in Qld and SA only. Consult your local BlueScope Lysaght Service Centre for advice. Extended lead times may apply.
LYSAGHTSeries
300-350bridging
Details onapplication
SUPAZEDS
SUPACEES
LYSAGHTHOOK-LOK II
Purlin Product CodingThe coding of the purlin products consists of prefix letters followed by a series of numbers.The prefix letters are for the various purlin shapes and
SZ = LYSAGHT SUPAZED®
shapeSC = LYSAGHT SUPACEE®
shape
The letter prefix is then followed by a three digit number indicating the section nominal depth in millimetres (not the actual depth). Thus the nominal depths would be 150, 200, 250, 300, 350 or 400.
This is then followed by a two digit number designating section thickness. This would
For example SZ20012designates a LYSAGHTSUPAZED® 200 millimetres
Where reference is made to both purlin shapes of the same size then designation such as SZ/SC is used, similarly for other shapes.
ProductAvailability
Stru
ctur
al P
rodu
cts
Non-Standard purlin options (Subject to enquiry in Qld)
Non-Standard purlin options are available subject to enquiry. These non-standard options are available on special projects only and will be subject to minimum order quantities and extended lead times.
LYSAGHT SUPAZEDS and SUPACEES are accurately roll-formed from high-strength zinc-coated steel to provide an efficient, lightweight, economical roofing and cladding support system for framed structures.
The system includes HOOK-LOK™ IILYSAGHTand a wide range of accessories. It is supplied ready for erection.
Available in NT from manufacturing site in SAwith a two week lead time.
Made in Qld, NSW and SA.
DIMENSIONS OF SUPAZEDS AND SUPACEESF
D
LF
E
LE
t
D
B
LB
t
rounded off to the nearest 0.5mm.
ProductAvailability
Dimensions of SupaZeds and SupaCees
Product Code Mass per unit SupaZeds/SupaCees Code Length (kg/m)
t DSZ15010/ SC15010 57.5 1.0 2.38SZ15012/ SC15012 1.2 152 2.89SZ15015/ SC15015 1.5 152 3.58SZ15019/SC15019 1.9 152 4.51SZ15024/ SC15024 2.4 152 5.67
SZ20012/SC20012 1.2 203 3.62SZ20015/ SC20015 1.5 203 4.49SZ20019/ SC20019 1.9 203 5.73SZ20024/ SC20024 2.4 203 7.20
SZ25015/ SC25015 1.5 254 5.16SZ25019/SC25019 1.9 254 6.50SZ25024/ SC25024 2.4 254 8.16
SZ30019/ SC30019 1.9 300 8.02SZ30024/ SC30024 2.4 300 10.09SZ30030/ SC30030 3.0 300 12.56
SZ35024/ SC35024 2.4 350 12.20SZ35030/SC35030 3.0 350 15.19
SZ40024/ SC40024 2.4 400 13.15SZ40030/ SC40030 3.0 400 16.45
Available in Victoriavia Metalform.
48 LYSAGHT Product Catalogue – 2010 Edition
LYSAGHT Product Catalogue – 2010 Edition 49
The holes punched in the webs are located at the accepted industry standard gauge lines. The gauge lines are as detailed below and the holes are equally spaced above and below the centreline of the purlin.
Purlin Gauge line (G)Nominal Size (mm)
100 40
200 110250 160300 210350 260400 (Qld/SA only) 310
HOLE GAUGE LINES
Purlin AccessoriesThere is a range of LYSAGHTaccessories available for use with the LYSAGHT purlins. Theseaccessories are an integral part of the LYSAGHT purlinand girt system. All LYSAGHTaccessories are zinc-coated steel.
Purlin bolts
both the head and nut shall be used for all types of connections described in this manual as required by AS/NZS 4600, Clause 5.3.1
NOTE: GPB300
Queensland. Please contact your local service centre.
M12 sizeLYSAGHT standard purlin
with nut.LYSAGHT high-
M12 x 30 mm with nut.
M16 sizeLYSAGHT standard
M16 x 45 mm with nut (Grade 8.8 available
subject to enquiry.)
1 1 1 1 1 1Product Code
A1
B1
C1
D1
E1
F1
6 holes18 mm diameter
3535
General purpose bracket
ProductAvailability
ProductAvailability
Stru
ctur
al P
rodu
cts
Angle connectorsThe angle connectors are detailed to allow connections of sections of the same size or one size smaller.
Clamp platesUsed in conjunction with angle connectors and racking girt bracket to allow connections to the lips of Cee purlins.
Racking Girt Bracket
The Racking Girt
ends of the C10015 Racking
supplied formed at right angles, as shown, and is formed on-site by the erector to the correct angle to suit to roof slope.
Other accessoriesThere are other accessories that may be available subject to enquiry, and these may be subject to minimum order quantities and extended lead times.These other accessories may
and grades)
Racking GirtThe racking girt is simply a C10015 purlin profile. Theracking girt bracket has been dimensioned to suit this girt.
shaped for fascia application
turned bottom lip
70
25
70
90 mm for Product Code AC100140 mm for Product Code AC150
NOTE: PAC300 is available in Qld. Please contact your local service centre.
70
35
35
18
35 40
15
70
70
70 50
70240
190
Product Code
AC100AC150
Product Code
AC200
Product Code
AC250
54
25
B
18
A25
Product CodeCP100
CP150 140 15CP200 190 15CP250 240 40
90
185
135
40 7025
40
25
18
102
51
13.5
Also comes in 100mm size.
Also comes in 150, 200 and 250 mm sizes.
ProductAvailability
50 LYSAGHT Product Catalogue – 2010 Edition
LYSAGHT Product Catalogue – 2010 Edition 51
LYSAGHT HOOK-LOK® II Bridging members - Typical component combinations
P channelC
clampend
Llocator
endStandard bridge(clamp/locator)
Standard bridge(bolted) P channel
Bbracket
end
Bbracket
end
FIX
ED
LE
NG
TH
D channel
Fbracket
end
Bbracket
end
Cclampend
Llocator
end
Adjustablefascia bridge
AD
JUS
TA
BL
EL
EN
GT
H
Adjustablebridge
Expansion joint/ridge tie
Girt foot
Pivot end bridgingfor curved roof
Tie rod
Turnbuckle/ridge tie
Girt hanger
Bbracket
end
Cclampend
Llocator
end
Bbracket
end
Cclampend
Llocator
end
S c
hann
el
Bbracket
endC
clampend
Llocator
end
T turnbuckle
TTu
rnbu
ckle
B bracket end
C clamp end
L locator end
B bracket end
C clamp end
L locator end
Bbracket end
Bbracket end
Cclampend
Bbracket
end
Cclampend
L locatorend
Bbracket
end
Cclampend
Llocator
end
Bbracket
end
Bbracket end
Cclampend
Llocator
end
S channel
S c
hann
el
Gbracket end
†
†
†
†
P channel
† †
† clinched connection
L locatorend
bolt connection
D channel
TTu
rnbu
ckle
T turnbuckle Bbracket end
Cclampend
Bbracket
end
Cclampend
L locatorend
L locatorend
Bbracket
endC
clampend
Llocator
end
†
either clinched or bolt connection
S channel
S channel
B bracket end
C clamp end
L locator end
Other
Girt bridging options
OR
OR
HOOK-LOK II Bridging - Minimum lengths (mm)*Purlin Depth
Bridging member 100 150 200 250Standard C-L ends 240 200 200 200Standard bolted 450 450 200 200Girt hangers 450 450 450 450Girt foot 300 300 300 300Turnbuckle ridge tie 500 500 500 500Adjustable bridging 500 500 500 500Tie rod 200 200 200 200
ProductAvailability
Stru
ctur
al P
rodu
cts
How to specify HOOK-LOK IIpartsPads of LYSAGHT HOOK-LOK IIorder forms are available from your local representative.
When specifying HOOK-LOK II
1. Specify the HOOK-LOK IIprefix H2.
2. Specify left hand end component – always three characters (e.g. C20)
3. Specify the type of bridging channel – always one character (e.g. P)
4. Specify right hand end component – three characters (e.g. L20)
Putting these together, you would
Example 1An adjustable bridging, with clamp to suit a C15015 purlin at one end and a bolted bracket to suit a C20024 purlin at the other
(This assumes that the order was not for use in Victoriawhere the product code would
to Product codes table.)
Example 2Fascia bridging, to span between a C20024 used as a fascia purlin
H2 F20 D L20.
Product codes for HOOK-LOK II parts
Clamp endCODE C
Locator endCODE L
FasciabracketsCODE F
BoltedbracketsCODE B
TurnbuckleCODE T
Tie rodCODE R
Bridgingchannel:
plainCODE P
Bridgingchannel:slotted
CODE S
Bridgingchannel:double
CODE D
Girt bracketCODE G
Mark No.
C10C15C1V*C20C25
L10L15L1V*L20L25
F20F25
Mark No.
B10B15
B20B25
T10†T12†
R12†R16†
Mark No.
P
S
D
G
* For Victoria, 150 size bridging is specified using a 'V' instead of the '5'† 10,12 or 16 refer to rod diameter in mm
This is a bridging system used with the larger 300 and 350 sections.
The components consist of a C15015 or SC15015 channel and bridging ends assembled with LYSAGHT high strength M12 x 30mm purlin bolts.
All components are galvanised for long life and can be assembled using the recommended bolts.
When ordering, the overall bridging length should be specified, i.e. purlin or girt spacing, less 3mm.
Catalogue numbers for this
Series 300 and 350 bridging systemLYSAGHT
ProductAvailability
ProductAvailability
52 LYSAGHT Product Catalogue – 2010 Edition
LYSAGHT Product Catalogue – 2010 Edition 53
Fascia Purlin FP23019
One-piece fascias are easy solutions to the needs
of buildings with bigger portal fame spacings.
The FP23019 purlin is roll-formed, from higher tensile steel than the FP26015, and
is stronger.
PunchingFP23019 purlins are
normally supplied punched. FP26015 are normally
not punched, but can be punched if ordered.
Fascia Purlin FP26015Dimensions vary from state to state. Not standard. Used with Z or C250.
Not available in Vic. or WA. Subject to enquiry in NSW.
Associated purlin products
Varies to suit roof slope.Specify when ordering.120° max, 84 min.
20
34 min.
10
Holes 22 x 18
30
230
6511
0
1.950
95
5
Registered designNo. 100252
Varies to suit roof slope.Specify when ordering.120 max, 84 min.
20
30
260
1.560
130
5
160
50
Holes 22 x 18
Dimensions vary from state to state. Contact your local service centre for details of fascia purlin range.Subject to enquiry in WA.
Nominateanglerequired.
ProductAvailability
ProductAvailability
FasciaPurlinFP23019
Fascia PurlinFP26105
ProductAvailability
In WA, order C15019, C20019 or C25019 purlin and
nominate angle required to match roof slope.
Stru
ctur
al P
rodu
cts
54 Lysaght Product Catalogue – 2006 Edition
LYSAGHT TOPSPAN® lightstructural sections are the economical alternative to timber battens. They are lighter than timber and frequently used for roofing, sheds and garages.
Storage, carrying and handling of TOPSPAN sections are easier, because they nest together. There is no need to cut to length because the sections can be lapped.
Material
enquire at your local sales office.
TOPSPAN 61
0.75, 1.00Length
75006100 (W.A. only)
TOPSPAN 96
0.75, 1.001.20
Length7500
TOPSPAN 120
0.70, 0.901.00
Custom cut to length
TOPSPAN light steel sectionsLYSAGHT
75
32
40
1490
42
40
15
63
29
22
11.5 619
28
22
117
32
96
14102.5
36.5
61
14149
40
120
22
ProductAvailability
See notesfor product.
Associated top hat productsTOPSPAN 50
0.75‡Length
75006100 (W.A. only)
‡Used in cyclonic areas
88
25
50
20
In SA, an alternative roof batten and ceiling batten are available. Please refer to your local office for details.
TOPSPAN 22*
0.42Length
6100
TOPSPAN 22 Qld
0.42Length
6100
TOPSPAN 40
0.55, 0.75‡Length
7500‡Used in cyclonic areas
TOPSPAN 40 Vic
0.55Length
6000
54 LYSAGHT Product Catalogue – 2010 Edition
LYSAGHT Product Catalogue – 2010 Edition 55
Structural steel decksLYSAGHT
a family of structural steel decks for a broad range of applications - LYSAGHTW-DEK®, LYSAGHT ®
and LYSAGHT POWERDEK®.
This table compares the LYSAGHT decks with each other to highlight where they are best utilised.
Cover Depth BMT Slab thickness UnproppedProfile(mm) (mm) (mm) minimum (mm) Span (mm)
590 54 0.6
0.75 90 up to 3400 1.0
700 78 0.75 130 up to 4100 1.0
300 1001.0
140 up to 5200
1.2
1.5
300 1201.2
160 up to 6000 1.5
depthcover
cover
depth
Cover
Depth
BONDEK
LYSAGHT W-DEK
POWERDEK (Available subject to enquiry)
Comparisons of spans, concrete displacement, fire performance and other important criteria are included here.
This data is the result of full scale testing, analysis and design comparisons at our NATA-registered laboratory and associated academic research centres.
strengths of each product, the specifier can choose the one most suitable for the job.
Stru
ctur
al P
rodu
cts
BONDEK
590 mm cover
54 mm
® is a formwork and bottom reinforcement system for concrete slab construction, suitable for domestic and major building projects. Itis more economical than conventional formwork, fast to install, and allows easy fixing of ceilings and services. Structurally, replaces usual bottom reinforcement.
Base materials and coating mass
LengthsCustom cut lengths from 1200 to 17,000 mm. NoteQld maximum length 10,000 mm.
Dimensions Depth = 54 mm Cover Width = 590 mm
Mass2
2
2
2
Tolerances
Finishes
Standard is Galvanised Z350. ®, a pre-
painted underside, can be made to special order.
BONDEK accessories
LYSAGHT
BonfillPolystyrene foam stops concreteand air entering ends of ribs.Stock length: 1200mmRequired: 300mm per sheet of BONDEK.
BonwedgeLightweight bracket for rodsto suspend ceilings or services(other than fire sprinkler systems).Max. load: 100 kg
End plug Polyethylene end plug stops concrete and air from entering end of BONDEK ribs.
Bon-nutHeavy duty square nut tosuspend ceilings or services.Glued to a paper strip it makes insertion easy.Threads: M8, M10 and M12. M6 is available for light loads only (2.7 kN or less)
21.5
8.5
BONDEK Safe loadBMT (kN)0.75 4.41.00 6.7
Post tensioning clipAllows BONDEK composite slabsto be post-tensioned.
SealingTapeTape is used to seal gapsto prevent leakage ofwet concrete.
BonstripPlastic trim to covergaps formed by ribs.Used when underside ofBONDEK forms an exposed ceiling.Stock length: 3000 mm. Allows Gyprock® to be fixed to BONDEK.
EDGEFORMA galvanised section that creates a permanent formwork atthe slab edges—cut, mitred and screwed on site.
ProductAvailability
56 LYSAGHT Product Catalogue – 2010 Edition
LYSAGHT Product Catalogue – 2010 Edition 57
cover
depth
W-DEK
LYSAGHT W-DEK is an economical, versatile, robust formwork and flooring system. It can also be used to reduce bottom reinforcement in concrete slabs.
It is particularly useful in steel framed buildings, widely acknowledged as the future of multi-storey building construction, but is not limited to these composite concrete slab systems.
Base materials and coating mass
Lengths
Custom cut lengths from 1000mm to 14000mm
Mass
2
2
Dimensions Depth = 78mm Cover Width = 700mm
Tolerances
Finishes
Hot dipped zinc coated high tensile steels - G550, Z350 grade to AS1397.
LYSAGHT
Cover
Depth
POWERDEK (Subject to enquiry)
LYSAGHT POWERDEK willrevolutionise how you design with concrete slabs. LYSAGHT POWERDEK gives you significantly increased unpropped spans (up to 6.0m) and substantially increased load carrying capacities.
A positive interlocking rib provides a strong, secure
the profiles are encased in concrete, they have exceptional
fire performance, with no extra reinforcement required for up to a 3 hour fire rating.
LYSAGHT POWERDEK steeldecking profiles have sufficient shear bond capacity for imposed loads 30 kPa and more.
Available subject to enquiry.Extended lead times and minimum order quantities apply. Refer to your local service centre for details.
Base materials and coating mass
Lengths(Custom cut lengths up to 10m.)
MassPOWERDEK 100 1.0 18.56kg/m2
POWERDEK 100 1.2 22.14kg/m2
POWERDEK 100 1.5 27.51kg/m2
POWERDEK 120 1.2 23.50kg/m2
POWERDEK 120 1.5 29.20kg/m2
Tolerances
FinishesHot dipped zinc coated Z275
LYSAGHTDimensions Depth = 100 or 120 mm Cover Width = 300 mm POWERDEK® 100 depth = 100mm POWERDEK® 120 depth = 120mm
Brackets from builder’s strapping.
ProductAvailability
ProductAvailability
Project based by enquiry only.
Stru
ctur
al P
rodu
cts
Cold-formed Sections: Standard
LYSAGHT cold-formed sections
angles, plain channels and lipped channels. They have many uses in the construction, general fabrication and home handyperson fields. Subject to enquiry in Qld & NSW.
Materials
G300, Z275 (300 MPa minimum yield stress, 275 g/m2 minimum
coating mass).
AS 1594 HU300 (300 MPa minimum yield stress).
Lengths
Custom made lengths on application.
Non standard lengths of will come in the same pack sizes as
the standard lengths.
Angles
Plain channels
Lipped channels
LYSAGHT ProductAvailability
Availability in NSW is subject to enquiry.
Product Code Size BMT Mass Uncoated Zincform LA 4630 46 x 35 3.0 1.79 Yes Yes LA 5130 51 x 30 3.0 1.79 Yes N/A
Product Code Size BMT Mass Uncoated Zincform LC 05130 51 x 25 3.0 2.15 Yes Yes LC 07630 76 x 38 3.0 3.34 Yes Yes LC 08330 83 x 34 3.0 3.34 Yes Yes LC 08930 89 x 31 3.0 3.34 Yes Yes LC 09530 95 x 37 3.0 3.70 Yes Yes LC 10330 103 x 34 3.0 3.70 Yes Yes LC 10230 102 x 55 3.0 4.77 Yes Yes LC 12730 127 x 50 3.0 5.24 Yes Yes
Product Code Size BMT Mass Uncoated Zincform LC 15230 152 x 51 3.0 5.84 Yes Yes LL 10230 102 x 51 3.0 5.24 Yes Yes LL 12730 152 x 64 3.0 5.84 Yes Yes LL 15230 152 x 64 3.0 7.15 Yes Yes LL 20330 203 x 76 3.0 9.06 Yes Yes LL 25430 254 x 89 3.0 10.83 Yes Yes
HANDY-C systemThe HANDY-C® system takes the place of timber supports for roof and wall cladding in lightweight structures. It comes complete with channels, cleats, bracing and self-drilling screws.
Parts
HANDY C cleat is available separately in NSW.
head 14 - 10 x 20
(Fastening of cleat to purlin supplied by customer to suit purlin.)
LYSAGHTProduct
Availability
58 LYSAGHT Product Catalogue – 2010 Edition
LYSAGHT Product Catalogue – 2010 Edition 59
INTERLOK II
INTERLOK II steel grating is an innovative and economical interlocking grating system that is suitable for a wide range of applications such as racking, shelving, walkways, catwalks, platforms, ramps and decking.
There are male-male and male-female planks, as well as joining and installation accessories.
DimensionsThe basic ‘plank’ is nominally 225mm wide x 65mm high, and is available in either anti-skid (raised ‘teeth’ on bars) or plain.
LengthsStock length = 6075mm.
Lengths from 497mm to 10800mm can be made to special order, in rib width multiples. Lengthsless than 6075mm incur an extra cutting charge.
Catalogue number & BMT
MaterialZinc-coated steel to AS1397, G300, Z450 (300 MPaminimum yield stress, 450-g/m2
minimum coating mass).
Heavy duty Extra heavy duty
INTERLOK II stair treads are made from INTERLOK G06520with welded carrier plates. The extra heavy duty treads have a floor plate nosing. Theyare quick and easy to install.
Not available in W.A.
Catalogue Lengthnumber (mm)
HP0024 2400
HP0027 2700 ‡
HP0030 3000
HP0040 4000
HP0050 5000
HP0060 6000
225
HANDIPLANK lapping bracket
(Not available in NSW)
HANDIPLANK is a universal steel plank with a skid resistant surface, suitable for many jobs around the home or light commercial applications. Theymeet the load requirements of AS1577—1993. Width is 225mm.
Male-male plank Male-female plank
65 m
m
65 m
m
225 mm(nominal)
225 mm(nominal)
LYSAGHT
INTERLOK II stair treadsLYSAGHT
HANDIPLANKLYSAGHT
CatalogueProduct Number
Heel/toe side plate G170S
Heel/toe end plate G170E
Filler panel G065FP
Carrier plate G056CP
End plate G065EP
Splice plateG065SP
Hold down clip G065HDC
Accessories
ProductAvailability
ProductAvailability
ProductAvailability
INTERLOKstair treads
‡ Not avialable in NSW
Stru
ctur
al P
rodu
cts
60 LYSAGHT Product Catalogue – 2010 Edition
SUPRATRUSS COMPONENTS
LYSAGHT SUPRATRUSS® is an engineered roof framing system made accurately from high tensile steel. Steel trusses don’t rot, shrink or burn, and termites don’t eat them.
BlueScope Lysaght does not design and fabricate trusses - we can refer you to an alternative supplier if required.
The following sections are available in these standard lengths and pack sizes. For minimum order quantities, please contact your nearest service centre.
SUPRATRUSS chord BMT (mm) Section Stocked lengths* Pack sizes
0.6 75 x 38 7500 50
SUPRATRUSS web(Not available in NSW)
BMT(mm) Section Stocked lengths* Pack sizes
0.75 51 x 28 Made to order 50
Boxed rafter BMT(mm) Section Stocked lengths* Pack sizes
0.48 70 x 38 Made to order 50
0.48 75 x 38 7500 50
0.48 90 x 38 7500 40
Universal bracket 70
Universal bracket 140
Pack size
100
Pack size
40
LYSAGHT
* Non-standard lengths: 1800mm minimum,
12000mm maximum (7500mm maximum in NSW)
ProductAvailability
LYSAGHT Product Catalogue – 2010 Edition 61
SUPRAFRAME COMPONENTS
LYSAGHT SUPRAFRAME® is an engineered wall framing system made accurately from high tensile steel. Steel walls don’t rot, shrink or burn, and termites don’t eat them.
BlueScope Lysaght does not design and fabricate trusses - we can refer you to an alternative supplier if required.
Boxed stud BMT (mm) Section Stocked lengths* Pack sizes
0.48 70 x 38 2408, 2443, 2708, 2743, 7500 50
0.48 75 x 38 Made to order* 50
0.48 90 x 38 2408, 2443, 2708, 2743, 7500 40
Open stud BMT (mm) Section Stocked lengths* Pack sizes
0.55 75 x 38 2408, 2443, 2708, 2743, 7500 60
0.55 ‡ 70 x 38 Made to order* 60
0.75 75 x 38 Made to order* 60
0.55 ‡ 90 x 38 Made to order* 60
0.75 ‡ 90 x 38 Made to order* 60
‡ Not available in NSW
Plate BMT (mm) Section Stocked lengths* Pack sizes
0.75 70 x 35 7500 50
0.75 70 x 65 7500 50
1.0 70 x 65 7500 50
0.75 75 x 35 7500 50
0.75 75 x 65 7500 50
1.0 75 x 65 7500 50
0.75 90 x 35 7500 50
1.0 90 x 65 7500 50
LYSAGHT
* Non-standard lengths: 1800mm minimum,
12000mm maximum, 7500mm maximum in NSW
ProductAvailability
Hou
se F
ram
ing
62 LYSAGHT Product Catalogue – 2010 Edition
Nogging
Lintel
Trim angle
Nogging clipPack size 900
Tensioner setPack size 100
Brick tieGalvanised steel Pack size 500Stainless steel‡ Pack size 500
A different style is available in SA. ‡Not available in NSW
Plumbing grommetPack size 2000
Electrical grommetPack size 2000
BMT Section Stocked lengths Pack sizes0.48 20 x 22 6100 20
BMT Section Stocked lengths Pack sizes1.0 200 x 35 6000 251.5 200 x 35 6000 25
BMT Section Stocked lengths Pack sizes1.0 35 x 35 4800 401.0 35 x 35 5800 40
Round washer32-mm x 2.5 with 6-mm hole. Galvanised steel.
Pack size 500
ProductAvailability
LYSAGHT Product Catalogue – 2010 Edition 63
Steel building frame (SBF) components
SMARTRUSS®
This is a system of components that can be used for fabrication into wall, roof and floor frames. The members are strong, accurate, light and stable, and lend themselves to fast assembly.
Steel frames won’t warp, twist, shrink, rot, or split, and are termite and fire proof.
MaterialWith the exception of the cyclonic stud, the components of this system are made from G300ZINCALUME® or GALVABOND®
steel that is easily weldable.
AvailabilityAsk your local BlueScope Lysaght office about product availability in your area.
The SMARTRUSS system is
comprised of:
®
®
®
AvailabilityAsk your local BlueScopeLysaght office about product availability in your area.
Made in NT and Nth Qld.
LYSAGHT
LYSAGHT
ProductAvailability
Truss top chord
Top plate
Nogging
Concrete slab
Cross bracing
Common stud
Lintel
HeadSill
Jamb studs
Bottomplate
Truss web
Truss bottom chord
Floor bearer
Floor joist
ProductAvailability
Hou
se F
ram
ing
64 LYSAGHT Product Catalogue – 2010 Edition
QUIKA-FLOOR
QUIKA-FLOOR® is a flooring system primarily used for domestic applications. It uses steel columns with steel floor bearers and joists which may be chosen from the profiles shown on this page.
FIRMLOK®, in COLORBOND®
steel or ZINCALUME® finishis usually used in verandahs, carports and patios.
There are QUIKA-FLOOR®
publications for design and spanning information.
Sub-floor bracingWhere sub-floor bracing is req. a 50 x 50 x 2.5 DURAGAL® angleis recommended although flat strapping may also be used.
Accessories
x 1.5 x 3600
QUIKA-BEARER brackets
QUIKA-BEARERS/JOISTS
Material to AS 1397 as follows:
BMT Steel grade1.9, 2.4 G450, Z3502.5 G300, Z275
Code No. D W t
QFPC10019U 102 51 1.9QFPC15019U 152 64 1.9QFPC15024U 152 64 2.4QFPC20019U 203 76 1.9QFPC20024U 203 76 2.4QFLL12025Z 120 55 2.5
QUIKA-JOIST
Material to AS 1397 G550, AZ150
Code No.
QFTSJ12090NS 0.9QFTSJ12010NS 1.0
FIRMLOK BEARERS/JOISTS
Material to AS 1397 G550, AZ150
Code No. D W t
FL10011ZLNS 100 47 0.55FL15015ZLNS 150 47 0.75FL20020ZLNS 200 47 1.0
LYSAGHT
W
D
t
40
120
149
t
W
Dt
ProductAvailability
Fencing: Non-cyclonicLYSAGHT fences are attractive, economical, versatile and durable. Andthey’re easy to install.
There are four ranges of fences: NEETASCREEN®,SMARTASCREEN®,CUSTOMSCREEN® andMINISCREEN®. When they are supplied with a lattice panel they are called NEETASCREEN PLUS, SMARTASCREEN PLUS, CUSTOMSCREEN PLUS and MINISCREEN PLUS.
CUSTOMSCREEN /CUSTOMSCREEN PLUS isavailable in Queensland and South Australia only.
All fence types are complemented by our range of gates, designed to harmonise perfectly. The gates are available with optional high quality handles and key-operable locks.
HeightsNominal heights of fences are 1200, 1500, 1800 and 2100mm from top of top rail to bottom of bottom rail. (1200mm height is not available in NSW.) Thebottom rail should be nominally 50mm above ground level.
ColoursAsk for the current range of COLORBOND® steel fencecolours.
SelectionUse our selection and installation guide to determine your needs.
NEETASCREEN NEETASCREEN PLUS NEETASCREEN PLUS WITH GATE (n/a in WA)
LYSAGHT
SMARTASCREEN SMARTASCREEN PLUS SMARTASCREEN WITH GATE (n/a in WA)
MINISCREEN MINISCREEN PLUS MINISCREEN WITH GATE (Subject to enquiry in SA) (Subject to enquiry in SA) (Subject to enquiry in SA) (n/a in
WA)
CUSTOMSCREEN CUSTOMSCREEN PLUS(Available in SA and Qld only) (Available in SA and Qld only)
Gates are available for CUSTOMSRCEEN and CUSTOMSCREEN PLUS fences, but no photo.
LYSAGHT Product Catalogue – 2010 Edition 65
Fenc
es
66 LYSAGHT Product Catalogue – 2010 Edition
1200
84
43
53
60
48
60
25
38
29
Posts Standard lengths 2100, 2400, 2700 & 3000mm (and 1800mm available in S.E. Qld)
Infill sheets Standard lengths 1490, 1790 & 2090mmNEETASCREENrange
†Rails Standard lengths 815, 1575, 2350 & 3100mm for SMARTASCREEN & NEETASCREEN840, 1585, 2350 & 3100mm for MINISCREEN840, 1605, 2370 AND 3100mm FOR CUSTOMSCREEN
Post caps
Fasteners
MINISCREEN universal rail
CUSTOMSCREEN universal rail
LYSAGHTpost cap
(cut with knifeto get single caps)
Ball cap Ripple Tek® screw10—16 x 20(MINISCREEN range only)
Self-drilling, self tapping hex. washer-head screws10—16 x 16 (All fence types)12—14 x 45 (Fence Type 3 and extra wide gate)
PostcoverstripStandardlength2400mm
(Used as top & bottomrail & middle rail forNEETASCREEN PLUS &SMARTASCREEN PLUS)(38 x 38 x 1.2 in SA)
(Used as top & bottomrail & middle rail forMINISCREEN PLUS)
(Used as top & bottomrail & middle rail forCUSTOMSCREEN PLUS)(38 x 25 x 1.6 in SA)
MINISCREENrange
616
38
60
Standardpost
Insert cap(for square post)
Post
s
Post
s
Post
s
NEETASCREENSMARTASCREEN &CUSTOMSCREEN
NEETASCREEN PLUSSMARTASCREEN PLUS &CUSTOMSCREEN PLUS
MINISCREEN MINISCREEN PLUS
Univers
al rail
Infill sheetInfill sheet(NEETASCREENshown) Infill sheet
Ballcap
Post
s
Lattice
Centre rail
Centre rail
Lysaghtpost cap Lysaght
post cap
Ballcap
Standardpoststiffener(Fence Types2 & 3)
Self-drilling, self tappinglong drill bit hex. head screw12—24 x 32 (Fence Types 2 & 3)
LatticeStandard length 2350 mmNEETASCREEN PLUSMINISCREEN PLUS
300
nom
inal
Univers
al rai
l
Universal
rail
Universa
l rail
Universa
l rail
Universal
rail
Universal
rail
Universal
rail
Universal
rail
Lattice
Universa
l rail
MINISCREEN centre rail(38 x 25mm)
Square postCorner junctions &
single gates 60 x 60 x 1.6(50 x 50 x 1.6 in SA)
Extra wide gates65 x 65 x 2.5
Length 2400 & 3000mm
28
SMARTASCREENrange
Infill sheet(NEETASCREENshown)
SMARTASCREEN & NEETASCREEN
universal rail
CUSTOMSCREENrange
†
ProductAvailability
ProductAvailability
ProductAvailability
ProductAvailability
CUSTOMSCREENNEETASCREENMINISCREEN
SMARTASCREEN
In NT, non-cyclonic fences are only available south of Katherine.
MANDALAY™ fence
Fencing: Cyclonic & High Wind Conditions
LYSAGHT
LYSAGHTLYSAGHT cyclonic fences are based on our well respected NEETASCREEN fences.
There is one family: NEETASCREEN and NEETASCREEN PLUS (the latter is topped with a lattice panel). There are two configurations. NEETALOK® is specifically designed for use in wind region D.
NEETASCREEN is available in Qld & NT only, NEETALOK® is only available in WA.
HeightsNominal heights of fences are 1500 and 1800 mm from top of top rail to bottom of bottom rail. Thebottom rail should be nominally 50 mm above ground level.
ColoursAsk for the current range of COLORBOND® steel colours.
SelectionUse our selection and installation guide to determine your needs.
ProductAvailability
ProductAvailability
MANDALAY™ fence utilises LYSAGHT universal posts and rails - slats can be retrofitted to give an existing fence a modern face-lift.Available in 1200mm, 1500mm and 1800mm full fencing heights and a 300mm size to place at the top of a traditional COLORBOND steel fence as a decorative feature.More cost effective than powder-coated aluminium and more durable than timber.Requires minimal maintenance and no painting – just a regular wash down.
LYSAGHT Product Catalogue – 2010 Edition 67
Fenc
es
68 LYSAGHT Product Catalogue – 2010 Edition
CYCLONIC FENCE OPTIONSLYSAGHT
NEETASCREEN TYPE 3 FENCE
LYSAGHT post cap
NEETALOK FENCE
NEETASCREENstandard postStandard lengths:2100, 2400, 2700
& 3000 mm
Infill sheet Standard lengths: 1490, 1790, 2090 mm BMT 0.42
NEETALOKbrackets
Stiffeners(1200 mm long)
NEETASCREEN PLUS TYPE 3 FENCE
Lysaght post cap (cut in half)
Domed cap
Square post (optional at
corner junctions) Minimum 60 x 60 x 1.6
Domed cap
Self-drilling, self tapping hex. washer-head screws
10—16 x 25 12—14 x 45
NEETASCREEN universal rail Standard length 2350 mm (2 places)
Rectangular post 100 x 50 mm
2.0, 2.5, 3.5 mm BMT Standard lengths:
2400, 2700 & 3000 mm
Infill sheet Standard lengths: 1490, 1790, 2090 mm BMT 0.35
NEETASCREEN standard posts Standard lengths:
2100, 2400, 2700 & 3000 mm
NEETASCREEN universal railStandard length 1575 mm(2 places)
Square post (optional at
corner junctions) Minimum 60 x 60 x 1.6
Domed cap
NEETASCREEN standard posts Standard lengths:
2100, 2400, 2700 & 3000 mm
Stiffeners(1200 mm long)
NEETASCREEN universal railStandard length 1575 mm(3 places)
LatticeStandard length 1575 mm
Infill sheet Standard lengths: 1490, 1790, 2090 mm BMT 0.35 Self-drilling, self tapping
hex. washer-head screws 10—16 x 16 12—14 x 45
Self-drilling, self tapping long drill bit hex. head screw
12—24 x 32
Square post (optional at
corner junctions) Minimum 60 x 60 x 1.6
Domed cap
Self-drilling, self tapping hex. washer-head screws
10—16 x 16 12—14 x 45
Self-drilling, self tapping long drill bit hex. head screw
12—24 x 32
NEETALOKraking
adaptors
Ball cap
ProductAvailability
GATE OPTIONSLYSAGHT gates are quick and easy to install. Theyare designed to fit perfectly with the NEETASCREEN®,SMARTASCREEN®,CUSTOMSCREEN® andMINISCREEN® range of fences.
There are a range of options to choose from.
The gates are ordered by specifying:
1. Single width or double gate
2. Specify colour & height of gate stiles, rail & infill sheet
3. Standard width or extra wide
4. Specify accessory kit
(External Accessory Kit in Qld)
5. If lattice required (Plus fence) specify colour
6. Specify optional extras if required
Gate widths for NEETASCREEN,SMARTASCREEN & CUSTOMSCREEN
Single gates: 885 mm
Extra-wide gates: 1645 mm
Two extra-wide gates are needed for a typical driveway
NEETASCREEN fences can be reduced in width by increments of 190 mm.
SMARTASCREEN FENCES can be reduced in width by increments of 128 mm.
CUSTOMSCREEN fences can be reduced in width by increments of 76 mm.
MINISCREEN
Single gates: 910 mm
Extra-wide single gates: 1655mm
Two extra-wide single gates are needed for a typical driveway. MINISCREEN fences can be reduced in width by increments of 25 mm.
Not available in W.A.
NEETASCREEN, SMARTASCREEN & CUSTOMSCREEN gate options (NEETASCREEN shown)
LYSAGHT
Stile
Bottom rail
Top rail
Stile
Infil
l she
et
Stile
Bottom rail
Top railSt
ile
SINGLE GATE EXTRA-WIDE SINGLE GATE
Infil
l she
et
Infil
l she
et
PremiumGate Accessory Kita) Single Gate Accessory kit (GK5):Lokk-Latch Pro set (key, lock both sides)HandleHinge (black)Accessory Screws (black #10-24x16 Wafer Heads)Stile Caps (plug type)b) Double Gate Accessory Supplement Kit (GK4):Hinge (black)Accessory Screws (standard #10-24x16 Wafer Heads)Stile Caps (plug type)Drop Bolt (zinc)
Extras:Infill SheetLattice-short (815 Neeta & Smarta, 840 Custom, 905 Mini)Lattice-long (1575 Neeta & Smarta, 1604 Custom,1675 Mini)
Optional Extras:Tubular Gate Post + Cap (60x60)Tubular Gate Post + Cap (65x65)Drop Bolt (zinc)Edge Cover Strip (additional for lattice &/or Infill sheet)Screws (#12-14x45 Hex Heads)
Gate Accessory Kit - Contents
a] Single Gate Accessory kit (GK1):Locking set - D-latch with extension handle + striker, (zinc)Hinge (zinc)Striker Cover (anti-rattle)Accessory Screws (standard #10-24x16 Wafer Heads)Stile Caps (plug type)b] Double Gate Accessory Supplement Kit (GK2):Hinge (zinc)Accessory Screws (standard #10-24x16 Wafer Heads)Stile Caps (plug type)Drop Bolt (zinc)Standard Gate Accessory Kit:a] Single Gate Accessory kit (GK3):Lokk-Latch set (key, lock one side)HandleHinge (black)Accessory Screws (black #10-24x16 Wafer Heads)Stile Caps (plug type)b] Double Gate Accessory Supplement Kit (GK4):Hinge (black)Accessory Screws (standard #10-24x16 Wafer Heads)Stile Caps (plug type)Drop Bolt (zinc)
Quantity of items in each kit depends upon whether it is a single, double or extra-wide gate, and if it has a lattice (Plus). Check with your local distributor for specified quantities for your requirement.
Economy Gate Accessory Kit:
SMARTASCREEN gate illustrated above.
ProductAvailability
LYSAGHT Product Catalogue – 2010 Edition 69
Fenc
es
Infil
l she
et
Stile
Bottom rail
Top rail
Latt
ice
Lower top rail
Infil
l she
et
Stile
Bottom rail
Top rail
Latt
ice
Lower top rail
Infil
l she
et
SINGLE GATE
Latticegateclip
Latticegateclip
EXTRA-WIDE SINGLE GATE
NEETASCREEN PLUS & SMARTASCREEN PLUS gate options (NEETASCREEN shown)
Stile
Infil
l she
et
Stile
Stile
cov
er
Stile
cov
er
Bottom rail
Centre rail
& clip
Stile
Infil
l she
et
Stile
cov
er
Bottom rail
Stile
Stile
cov
er
Centre rail
& clip
SINGLE GATE
Top rail
Latt
ice
Lower top rail
Top rail
Latt
ice
Lower top rail
Latticegateclip
Latticegateclip
EXTRA-WIDE SINGLE GATE
MINISCREEN Plus gate kit
MINISCREEN gate kit
Stile
Infil
l she
et
Stile
Stile
cov
er
Stile
cov
er
Bottom rail
Top rail
Centrerail
& clip
Stile
Infil
l she
et
Stile
cov
er
Bottom rail
Top rail
Stile
Stile
cov
er
Centrerail
& clip
SINGLE GATE EXTRA-WIDE SINGLE GATE
There are additional options available for latches, handles, hinges and locks in the Economy, Standard and PremiumAccessories packs. CUSTOMSCREEN/ CUSTOMSCREEN PLUS (not illustrated) is available in SA and Qld only.
ProductAvailability
70 LYSAGHT Product Catalogue – 2010 Edition
LYSAGHT HOME IMPROVEMENTS
When you invest in a LYSAGHT Living Collection® addition for your home, you are assured of building with materials engineered and tested to Australian Standards. Available in a range of architectural styles and modern colours to complement your home, the LYSAGHT Living Collection® features strong and sturdy steel components from Australia’s largest steel manufacturer – BlueScope Steel. Style and design flexibility is central to the LYSAGHT Living Collection®, which has been created as a complete system. All of the designs can be combined into a format that will
suit your home, lifestyle and budget. Matching gutters and downpipes provide a complete package that will enhance the elegant appearance of your extension.Available as freestanding units or attached to the home, create a personal outdoor living space that will enrich your home and outdoor family entertaining area.Designs have been focussed on low maintenance, durability, wind resistance, security and privacy – they are also fire, rot and termite resistant. No matter what you’re looking for, a LYSAGHT Living Collection® patio or carport is the ideal addition to your home.
The LYSAGHT Living Collection®
is engineered and tested to Australian Standards and developed for maximum aesthetic appearance and structural performance.
Ask about availability and distributor opportunities in your area with your local LYSAGHTrepresentative.
LYSAGHT Home Improvements: Patios, Extensions & Carports
Sit back, relax and enjoy a whole new dimension to your home and enhance your lifestyle with the LYSAGHT Living Collection®
range of Patios, Extensions and Carports.
ProductAvailability
Availability in Nth Qld subject to enquiry.
LYSAGHT Product Catalogue – 2010 Edition 71
Hom
e Im
prov
emen
t
72 LYSAGHT Product Catalogue – 2010 Edition
LYSAGHT
LYSAGHT FLATDEK® is designed to provide a long-span with an attractive ceiling or internal flush finish. It is particularly useful for awning, carport and similar structures.
The unique dovetail rib can be easily fitted by hand.
Receiver channel foam is 50mm x 20mm. Available in 2m lengths.
Base materialsSteel grade: G550 Coating: AZ150 BMT: 0.42mm
LengthsLengths are custom cut. Check maximum and minimum with your supplier.
Mass (COLORBOND)6.0 kg/m2
TolerancesLength: + 0mm, – 10mm Width: + 2mm, – 2mm
Minimum roof pitch2 degrees (1:30)
Foam infillsFoam infills and strips are available for sealing the receiver channel. For more information, refer brochure.
FinishesA range of COLORBOND® steelcolours, refer to your local stockist for colour selection available. Also available in Hi-Gloss finish on underside.
Materials compatibility, standards & testingSee Page 1
Made in NSW & SA.
FLATDEK
250mm cover
45mm
LYSAGHT FLATDEK II is a long double span cladding making it particularly well suited to many types of home improvement projects like room additions, carports and awnings.
The underside of FLATDEK IIfeatures clean uninterrupted lines, with an attractive gloss finish. Fixing methods are easy and save time. FLATDEK II combines all the aesthetic benefits of FLATDEK,with the additional benefit of faster installation and fewer laps.
The unique overlapping dovetail ribs of the FLATDEK II profile can be easily fitted together by hand.Receiver channel foam is 50mm x 10 mm. Available in 5 m lengths.
Base materialsSteel grade: G550 Coating: AZ150 BMT: 0.42mm
LengthsLengths are custom cut. Maximum length 8000mmMinimum length 850mm
Mass (COLORBOND)5.2 kg/m2
TolerancesLength: + 0mm, – 10mm Width: + 2mm, – 2mm
Minimum roof pitch2 degrees (1:30)
FinishesA range of COLORBOND® steelcolours, refer to your local stockist for colour selection available. Also available in Hi-Gloss finish on underside.
Materials compatibility, standards & testingSee Page 1
Made in Qld
FLATDEK IILYSAGHT
620 mm cover
FLATDEK II 45Product
Availability
ProductAvailability
FIRMLOK
LYSAGHT FIRMLOK® beam is a light, strong structural beam, and universal in its applications. It is developed for maximum aesthetic and structural performance. The unique interlocking Cee profiles provide a universal structural member with excellent spanning capacity and torsional resistance once fixed into position.
IdentificationThe format of the number code is:
F D t xxx xx
F=Firmlok xxx = Section xx = 2t x 10 depth D (mm) (mm)Eg: F15015 = FIRMLOK beam with depth of 150mm and 2t thickness of 15 = .75mm BMT
FinishesFIRMLOK beams are available in ZINCALUME® steel and several high gloss colours in COLORBOND® steel.
FIRMLOK universal brackets are also available powder coated to match COLORBOND® steel colours.
The apex bracket is available in galvanised only.
Base materials
Steel grade: G550Coating: AZ150BMT: 0.55, 0.75 & 1.00 mm.
LengthsStock lengths of FIRMLOKbeams are 4000, 5000, 6100, 7500 and 9000 mm. (Not all lengths are available in all centres. See your local service centre for avialbility.) Extended lead times may apply for non-standard lengths between 1,200 mm & 9,000 mm.
TolerancesDepth = ± 1 mm
Width = ± 1 mm
Length = + 0, -5 mm
LYSAGHT FIRMLOK beams are commonly used with FLATDEK/FLATDEK ll for carports, verandahs and patios.
Made in NSW and SA
FIRMLOK brackets
LYSAGHT
50 (nom.)
50 (nom.)
50 (nom.)
FL10011
FL15015
FL20020
NominalD = 100
NominalW = 50
NominalW = 50
NominalW = 50
F100 F150 F200
t
NominalD = 150
NominalD = 200
2t
tt
2t
2t
Universal brackets for different pitches0 to 5º 15º 22.5º
Apex bracketavailable for
15º and 22.5º pitches
Collar tie bracket
Column insertFIRMLOK FLSB
ProductAvailability
LYSAGHT Product Catalogue – 2010 Edition 73
Hom
e Im
prov
emen
t
74 LYSAGHT Product Catalogue – 2010 Edition
PATIO POSTLYSAGHTThe LYSAGHT PATIO POST isan attractive, fluted aluminium extrusion designed principally for use with FIRMLOK as a verandah post.
There is a matching die-cast foot which is easily fastened to a concrete slab or timber deck.
ColoursThere is a range of high gloss, powder coated COLORBONDcolours.
Stock lengths2400 & 3000 mm
SHS sections Consult your local branch regarding the availability of SHS sections from 60 x 60 to 90 x 90.
67 mmsquare
Patio post
Patio post foot
ProductAvailability
HEAD OPTION 1
HEAD OPTION 2
TWO10 – 16 x 16self-drillingscrews eachside of the
post into thepost-top
insert 20 mm
TWO10 – 16 x 16self-drillingscrews eachside of the
post into thepost-top
insert
WEB
www.lysaght.com
product brochures
TECHNICAL CALL CENTRE
engineers and other building professionals
RESEARCH & DEVELOPMENT
via your local Lysaght Service Centre or technical representative
Service & Support
LYSAGHT Product Catalogue – 2010 Edition 75
Hom
e Im
prov
emen
t
Aaccessory sheet 34ant caps 40
Bbatts, insulation 45beams
FIRMLOK 73blanket insulation. See insulationblind rivets. See fastenersBONDEK 56BONDEK accessories 56box gutter
brackets 37expansion joints 37sumps 37
bridgingHOOK-LOK II 51Series 300 & 350 52
bullnose order form 4
Ccappings
non-standard 21standard 18
ceesSA C-purlin 46purlins & girts 46
chinamans hat 33claddings
general notes 1roof
CUSTOM BLUE ORB 2CUSTOM ORB 2INTEGRITY 820 5KLIP-LOK 700HS 6KLIP-LOK 406 7 LONGLINE 305 8SPANDEK 9SPANRIB 9TRIMDEK 10
wallEASYCLAD 11EASYCLAD EH300 12MINI ORB 13 MULTICLAD 12PANELRIB 14TRIMWALL 14WALLCLAD 15Weatherboard 15
collars 38Colonial gutter 28compatibility of materials 1crimped bend 33
curved flashings 3CUSTOM BLUE ORB 2
bullnose order form 4CUSTOM ORB 2
DDEKTITE pipe flashings 40downpipe offsets
round 33square & rectangular 30
downpipesround 31square & rectangular 29
drops (pops)round 32square & rectangular 29
EEASYCLAD 13EASYCLAD EH300 14EASYCLAD trims 13elbows
round 32square & rectangular 30
EMLINE gutter 23enquiries i
Ffascia, NOVALINE 22fascia purlins 53fastener drive tools 43fasteners
blind rivets 44cyclonic assemblies
screw to steel 44screw to timber 44
nails to timber 44screw to steel 42screw to timber 43
fencingcyclonic 67MANDALAY 67gate options 69non-cyclonic 65
FIRMLOK 73FITFAST gutters 27flashing
DEKTITE 40soft zinc 35
flashingscurved 3New South Wales 18non-standard 21
Northern Territory 20Queensland 19South Australia 20standard 18Tasmania 18Victoria 19Western Australia 20
flat strips 34FLATDEK 72FLATDEK II 72formwork. See BONDEK, W-DEK, POWERDEK
Ggate options 69girts, zeds & cees 46gutter
box, brackets 37COLONIAL 28EMLINE 23Flat Back 27Half-round 27LYSAGHT OGEE 26Quad 150 & 175 24RANCELINE 28SHEERLINE 24TRIMLINE 23W.A. miscellaneous 28
gutter accessories. See under gutter namesgutters, non-standard 21
HHalf-round gutter 27HANDIPLANK 59HANDY-C system 58HOOK-LOK II bridging system 51hoop iron 34house framing
QUIKA-FLOOR 64steel building frame (SBF) 63SUPRAFRAME 61SUPRATRUSS 60SMARTRUSS 63
Iincompatible materials 1infill strips, roof profiles 40insulation
building blanket 45building blanket with foil 45ceiling batts 45reflective foil laminate 45foil tape 45wall batts 45
INTEGRITY 820 5INTERLOK II 59
stair treads 59
76 LYSAGHT Product Catalogue – 2010 Edition
KKLIP-LOK 700 HIGH STRENGTH 6KLIP-LOK 406 7 KLIP-LOK MAXIMA 8KLIP-LOK accessories 6, 7, 8
LLapseal 39light steel sections
TOPSPAN 54LONGLINE 305 9LONGLINE 305 Tapered 9louvres 36
MMaintenance (Cladding & RWG) 78 MANDALAY™ fence 67MAXIMA see KLIP-LOK MAXIMA 8mesh, safety 41MINI ORB 15MINI ORB trims 15MINISCREEN fences 65MULTICLAD 14
Nnails. See fastenersNEETASCREEN fences 65NOVALINE fascia system 22NOVALINE fascia cover 22nozzles
round 31square & rectangular 29
OOGEE (LYSAGHT OGEE) gutter 26overflows 38
PPANELRIB 16Patio post 74pop rivets. See fastenerspops
round 31square & rectangular 29
posts 74POWERDEK 57purlins 46. See also bridging
QQuad 115 (Hi & Lo front) gutter 26 Quad 150 & 175 gutter 25QUIKA-FLOOR 64
Rrainwater heads 38RANCELINE gutter 28roof collars 38roof infill strips 40ROOFTRAK 12
Ssafety mesh 41screws. See fastenersSeries 300 & 350 bridging 52SHEERLINE gutter 24sheeting
accessory 34translucent 39
shoesround 32square & rectangular 30
silicone sealant 35soft zinc flashing 35SMARTRUSS 63 SPANDEK 10SPANRIB 10stair treads 59standoff brackets
round 33steel building frame (SBF) 63strapping 34straps
round 32square & rectangular 30
sumps, box gutter 37SUPACEE 47SUPRAFRAME 61SUPAPURLINS 47SUPRATRUSS 60SUPAZED 47
Ttools
fastener drive 43turn-up & turn down 35
TOPSPAN 54transitions 38translucent sheeting 39TRIMDEK 11TRIMLINE gutter 23TRIMWALL 16
U universal nozzle 30
Vventilated ridges 36ventilators
domestic & industrial 41
WLYSAGHT W-DEK 57WALLCLAD 17WEATHERLOK washers 38Weatherboard 17Warranty (Cladding & RWG) 79
Zzeds & cees
(See also SUPAZEDS, SUPACEES)accessories 46
zeds, purlins & girts 46zinc flashing 35
LYSAGHT Product Catalogue – 2010 Edition 77 Inde
x
78 LYSAGHT Product Catalogue – 2010 Edition
These pages provide some basic information on recommended maintenance of LYSAGHT® roofing and residential rainwarer systems.
For full maintenance duty, which forms part of our warranty terms and conditions, refer to the current LYSAGHT Maintenance Handbook, which is available at www.lysaght.com.
1. Access & Safety issuesWhen maintaining the roof, do not damage the surface of the cladding, gutters and flashings.
* Soft protection should be placed on any equipment used, where it impacts on the roof cladding or gutters.
* Do not walk on roofs (ie patios and verandahs) which are not designed for foot traffic.
* When walking on unprotected roofing, soft rubber soled shoes should be worn.
* Walk on at least two ribs, as close to supports as possible.
* Avoid scratching the surface of the cladding.
2. Maintenance Requirements & FrequencyMaintenance should be carried out at least every four months, preferably - at the end of autumn and the end of spring.
In the case of extreme events (storms, tempest or other ‘Acts of God’), inspection should be carried out and abnormal maintenance undertaken as required.
3. Gutters and RoofingTwigs, dust, leaves and fungal matter (debris) should be removed regularly from gutters, downpipes, leafguards, slots holes and overflow devices - as failure to do so voids the warranty.
* Sweep debris into a pile using a stiff, soft bristled brush (shovels or hard tools should not be used).
* The whole roof and gutter should then be washed down with a hose, including high ends of gutters possibly protected by overhangs, rain heads, water spouts, slots, leafguards and overflow locations.
For complete terms and conditions of warranty, visit www.lysaght.com
Guidelines for roofing and rainwater maintenance
Step 3 Use a soft bristle brush to sweep out the pans. Rinse with water.
Step 6 Ensure all swarf (drill waste) is removed from the work area.
Step 5 Use a hose to quickly rinse the underside of gutters and roofs.
Step 4 The roof cladding should be clean after you rinse.
Step 1 Roof with leaf litter and dirt prior to cleaning.
Step 2 Use a hose to blow away twigs and soften hardened dirt.
Roof maintenance
LYSAGHT Product Catalogue – 2010 Edition 79
As most of our gutters, downpipes, flashings and cappings are also made with COLORBOND steel, they also enjoy a warranty against corrosion to perforation ranging from 10* to 25* years depending upon the application.BlueScope Lysaght have been serving the building industry in Australia for over 150 years. So you can rest assured that your LYSAGHT warranty is your solid guarantee of product performance in years to come.For full warranty terms and conditions (including the
maintenance procedures outlined here) please visit:
www.lysaght.com
Cladding and rainwater goods warranties
3) When litter is removed, the layer of hardened dirt is revealed below.
4) Rinse the gutter with water to soften and break up the dirt.
5) Use a soft bristle brush and sweep the dirt out. Rinse again.
6) When the gutter has been cleaned, it should look like this.
1) A typical gutter clogged with leaves, twigs & dirt prior to cleaning.
2) Wear correct protection when clearing leaves and twigs.
Gutter maintenance
* Warranties are subject to our standard terms and conditions.
With proper installation and regular maintenance, your LYSAGHT roofing, walling and rainwater system products will provide years of trouble-free performance - we guarantee it!Because LYSAGHT claddings are made exclusively with ZINCALUME® or COLORBOND® steel, they are warranted against corrosion to perforation for a period of up to 25* years by BlueScope Steel. So you can rest easy under a roof made of LYSAGHT COLORBOND® steel.And because LYSAGHT rainwater goods are performance tested in our NATA-accredited materials science laboratory, you can be confident that they are 'fit for purpose' and will do the job they are designed for.
Notes:
Notes:
Notes:
top related