1kha001069 sen substation automation solutions sas 600 series
Post on 20-Jul-2016
10 Views
Preview:
TRANSCRIPT
Substation Automation SolutionsSAS 600 Series
2 SAS 600 Series | Substation Automation Solutions
ABB’s SAS 600 Series More than IEC61850 compliant
The highlights of ABB’s SAS 600 Series
• FullyIEC61850compliantsubstationautomationsolutions
• Flexiblestationbustopologiesincludingmultiplenetworks
• State-of-the-artstationHMIbasedonActiveXtechnology
• Scalablearchitectureandfunctionality
• Integrationofcontrolandprotection
• Simplifiedfutureextendibilityinfunctionalityandsize
• OpenconnectivitythroughOPCinterfaces
• Implementationandsystemperformanceprovenby in-houseSystemVerificationCenter
TheSAS 600Seriesofmodularstationlevelsolutionsisdesignedformaximumsafety,efficiencyandreliabilityinlocalaswellasremotecontrolandmonitoringofyoursubstation.ItincorporatesABB’smarket-leadingexperienceinsubstationautomationandprotection,vastexpertiseinIEC61850andprovensystemintegrationcapabilities.
Theseriesoffersasmartchoicefornewstations,retrofitandmigrationprojectsandtheconfidencethatyoucaninvestintothefuturetoday.
TheSAS600SeriestogetherwithBCS600SeriesBayControlSolutionsandBPS 600SeriesBayProtectionSolutionsistheultimateandmostefficientstrategytobuildsubstationautomationsystems.
Substation Automation Solutions | SAS 600 Series 3
TheSASsolutionportfoliorangesfromcompactsolutionsforthesafecontrolandmonitoringofyoursubstationtothemostdemandingapplicationswheresinglepointsoffailurearenottolerableandhighestlevelsofavailabilityareanecessity.
Advanced SAS
Enhanced SAS
Basic SAS
SAS 690
SAS 670
SAS 650
SAS 630 / 635
SAS 610
SAS 605
Remote control
Station HMI
Basic monitoring
Basic control
Advanced monitoring
Advanced control
Independent embedded gateway
Redundant station HMI
Redundant gateway
Station Level S
olutions
Standard
Option
Customer requirements SAS 605 SAS 610 SAS 630/635 SAS 650 SAS 670 SAS 690
Functionality
Basiccontrolandmonitoringofsubstations • • • • • •
Advancedcontrolandmonitoringfunctions Option Option Option Option Option
Operation
Remoteonly •
Localonly • •
Localandremotewithpriorityonlocal Option •
Localandremotewithpriorityonremote Option •
Localandremotewithequallyhighpriority Option •
Recommended application
Substation
Distributionandsubtransmission • •
Highvoltagetransmission • • •
Extra-highvoltagetransmission • •
Complexdistribution • •
4 SAS 600 Series | Substation Automation Solutions
Baylevel
Trans-missionsubstation
Baylevel
Subtrans-missionsubstation
Bay Protection and Bay Control Solutions
Bay Protection and Bay Control Solutions
Station level (Example SAS 690)
IEC 61850-8-1
Redundant station HMI
Redundant gateway
Option
WorkstationHardcopyprinter
Eventprinter
GPS/Timeserver
Stationalarmdevice
Firewall/VPN
0 1 0
Gateway Router/ firewall/VPN
Gateway Router/ firewall/VPN
Redundantstation computer
Station LAN
Maintenance center
Remote control center
I/O
Proxy
Alternativemasterprotocols
StationlevelsolutionbasedonIEC61850inasubstationautomationenvironment
Substation Automation Solutions | SAS 600 Series 5
Advanced SAS – for extra high voltage and complex transmission substations
Enhanced SAS – for high voltage transmission substations
Basic SAS – for distribution and subtransmission substations
SAS 690
SAS 650
SAS 610
SAS 635
SAS 670
SAS 630
SAS 605
Highestavailabilityoflocalandremotecontrolthrough separationaswellasfullredundancyofgatewayandstationcomputer/HMI
FormannedsubstationswithcompletelyindependentHMIandgatewayfunctionalityusingredundantstationcomputersforlocalcontrolandmonitoring
CompactsolutionfeaturinganindustrialPCforlocalcontrolandmonitoringwithoptionalaccessforremotecontrol
Forunmannedsubstationswithcompletelyindependentstationcomputer/HMIandaRTUbasedstationcontroller forremotecontrol
Highestavailabilityoflocalcontrolprovidedbytworedundantstationcomputersinhotstand-byconfigurationwithoptionforremotecontrol
Forunmannedsubstationswithcompletelyindependent stationcomputer/HMIandahighlyreliableindustrialgatewayforremotecontrol
CompactandflexiblesolutionforremotecontrolusingaRTUbasedstationcontrollerwithoptionalintegratedHMI
Stationcomputer /HMI MicroSCADAPro(SYS600)
Stationcomputer /HMIwith integratedgatewayMicroSCADAPro(SYS600plusCOM500i)
Independentgateway MicroSCADAPro(SYS600C)
StationcontrollerRTU560
IntegratedHMIRTU560
Main components
Modular,scalablearchitecture
6 SAS 600 Series | Substation Automation Solutions
IEC 61850 Station BusFlexibleEthernetTopologies
Bay 1 Bay 2 Bay 3 Bay 4 Bay 5 Bay 6 Bay 7 ... Bay n
Bay 1 Bay 2 Bay 3 Bay 4
Centralized ring
Ethernet featuresLarge switches in station cubicle −High-speed Gigabit backbone −Redundant power supply (option) −
ApplicationsShort bay IED-to-station distance −Few IEDs per cubicle/compartment −
Station level
Station level
Station level
Decentralized ring
Ethernet featuresSwitches in bay and station cubicle −Choice of large and small switches −100 Mbit/s or 1 Gbit/s backbone −
ApplicationsLong bay IED-to-station distance −Many IEDs per cubicle/kiosk −
Multiple networks
Ethernet featuresUp to 3 physically separated networks −Free choice of topology per network −(centralized or decentralized)
ApplicationsLarge systems −Several voltage levels −Separate control and protection systems −Separate protection systems (Main 1, Main 2) −High reliability requirements −
The chosen network topology for the IEC61850 station bus is adapted to best suit the given physical location of the IEDs considering distances and number of IEDs concentrated in one place.
Themostcommonbasicarchitecturesareexplainedbelow.Inpracticeoneofthedescribedtopologiesoracombinationofthemmightbeused.
Substation Automation Solutions | SAS 600 Series 7
ABB’s system design is fully distributed. The time-critical information exchange applies to the bay level only.
How to use IEC61850 for time-critical information ex-changeThereareseveralautomatedfunctionsinthesubstationautomationsystem,whichrequireatime-criticalexchangeofinformationbetweenfunctionslocatedwithinthesamebayorindifferentbays.
Examples:
• Exchangebetweenlineprotectionandautorecloser
• Exchangebetweenbaysforbreaker-failureprotection
• Exchangebetweenbaysforstationinterlocking
• DRtriggeringbyprotectionfunctions
Station bus
Bay 1
Disc QB1and QB2 closed
WA1 not earthedWA2 not earthedWA1 and WA2 interconn . . . . .
Bay n
Disc QB1and QB2 closed
WA1 not earthedWA2 not earthedWA1 and WA2 interconn
Bus coupler
WA1 not earthedWA2 not earthed
WA1 and WA2 interconn
WA1 and WA2 interconnin other bay
QB1
WA1
WA2QB2
QA1
QB9
QB1 QB2
QA1
QB9
QB2QB1
QA1
QC1 QC2
DistributedFunctionality
Generic Object Oriented Substation Event Fortheexchangeofthistypeof(binary)informationviaserialcommunication,IEC61850introducesaspecificinformationexchangeservicecalledGOOSE(GenericObjectOrientedSubstationEvent)basedonthepublisher-subscriberconcept.ThecontentofaGOOSEmessageisdefinedwithadataset.TheGOOSEmessageissentasamulticastmessageviathecommunicationnetwork.Thismeansthatvariousdevicescanreceivethemessageandretrievetherequiredinformationfromit.Thecommunicationserviceisnotconfirmed;instead,themessageisrepeatedseveraltimes.
Station-wide interlockingAtypicalexampleistheexchangeofinformationbetweenlo-gicaldevicesforstationinterlocking.EachIEDdistributestherequiredswitchpositionsviaGOOSEtelegramviathestationbusandalsoreceivesswitchpositionsfromotherfeeders.Therefore,eachIEDhasaccesstoalltheinformationneededtoverifythestation-wideinterlockingconditions.
8 SAS 600 Series | Substation Automation Solutions
Basic SAS
SAS 605
Remote control
Station HMI
Basic monitoring
Basic Cont rol
Advanced monitoring
Advanced control
Independent embedded gateway
Redundant station HMI
Redundant gateway
Standard
Option
Decentralized ring*IEC 61850-8-1
Bay 1 Bay 2 Bay 3 Bay 4 Bay 5 Bay 6 Bay 7 ... Bay n
Option
Eventprinter
GPS/Time server
Stationcontroller
Gatewayfunctionality
I/Os
IntegratedHMI
Alternativemasterprotocolls
Firewall/VPN
Maintenance center
Remote control center
Router/ firewall/VPN
*Available Ethernet topologiesCentralizedring,decentralizedringormultiplenetworks
SAS 605 Basic Automation Solution
Flexible and maintenance-free solution for safe remote control and monitoring. The solution with a RTU based station controller supports direct hardwired I/Os and various master protocols.
Control at the substation level is available using the integrated HMI server of the station controller.
FeaturesHighly reliable station controller −Remote control −Basic monitoring and control functions −
OptionsIntegrated HMI −Different master protocols for legacy IED integration −I/O modules for hardwired interface −
Typical applications for SAS 605
Power UtilitiesSubtransmission and distribution level −
IndustryDistribution substations for power supply −
Power plantsDistribution substations for auxiliary supply −
Substation Automation Solutions | SAS 600 Series 9
Basic SAS
SAS 610
Standard
Option
Remote control
Station HMI
Basic monitoring
Basic Cont rol
Advanced monitoring
Advanced control
Independent embedded gateway
Redundant station HMI
Redundant gateway
*Available Ethernet topologiesCentralizedring,decentralizedringormultiplenetworks
SAS 610 Basic Automation Solution
The compact solution for safe local control and monitoring. It features a single computer and can be upgraded at any time. The choice is yours in terms of advanced functions and/or remote control access.
FeaturesSingle industrial station computer with HMI −Basic monitoring and control functions −
OptionsGateway functionality for remote control −Printers for event printing and hardopy −Engineering and operator workstations −Time server with integrated GPS receiver −Router and firewalls with VPN functionality −Proxy to connect legacy protocols and I/Os to IEC61850 −Station alarm device −Advanced monitoring functions −Advanced control functions −
Typical applications for SAS 610
Power UtilitiesSubtransmission and distribution level −
IndustryDistribution substations for power supply −
Power plantsDistribution substations for auxiliary supply −
Hardcopyprinter
Eventprinter
Workstation Station computer / HMI Stationalarmdevice
Gatewayfunctionality
IEC 61850-8-1 Centralized ring*
GPS/Timeserver
0 1 0
Firewall/VPN
Maintenance center
Router/ firewall/VPN
Remote control center
Option
10 SAS 600 Series | Substation Automation Solutions
Enhanced SAS
SAS 630 / 635
Remote control
Station HMI
Basic monitoring
Basic control
Advanced monitoring
Advanced control
Independent embedded gateway
Redundant station HMI
Redundant gateway
Standard
Option
*Available Ethernet topologiesCentralizedring,decentralizedringormultiplenetworks
SAS 630 / 635 EnhancedAutomationSolution
Safe control and monitoring for usually unmanned substations. A maintenance-free embedded gateway or RTU based gateway provides the access for remote control.
A dedicated computer is used for the local data acquisition and operation at the substation level.
FeaturesSAS630: Highly reliable embedded gateway for remote control −SAS635: Highly reliable RTU based gateway for remote control −Single station computer −Basic monitoring and control functions −
OptionsSeparate station LAN to interconnect station level devices −Printers for event printing and hardopy −Engineering and operator workstations −Time server with integrated GPS receiver −Router and firewalls with VPN functionality −
Proxy to connect legacy protocols and I/Os to IEC61850 −Station alarm device −Advanced monitoring functions −Advanced control functions −
Typical applications for SAS 630 / 635
Power UtilitiesSubtransmission and high voltage transmission level −
I/O
Proxy
Alternativemasterprotocols
Hardcopyprinter
Eventprinter
Workstation GPS/Timeserver
Station computer / HMI Stationalarmdevice
Firewall/VPN
Decentralized ring*
Gateway
Remote control center
Maintenance center
IEC 61850-8-1
Bay 1 Bay 2 Bay 3 Bay 4 Bay 5 Bay 6 Bay 7 Bay 8 Bay n...
OptionStation LAN
0 1 0
Router/ firewall/VPN
Substation Automation Solutions | SAS 600 Series 11
Enhanced SAS
SAS 650
Remote control
Station HMI
Basic monitoring
Basic control
Advanced monitoring
Advanced control
Standard
Option
Independent embedded gateway
Redundant station HMI
Redundant gateway
Bay 1 Bay 2 Bay 3 Bay 4 Bay 5 Bay 6 Bay 7 Bay 8 Bay n...
IEC 61850-8-1
Hardcopyprinter
Eventprinter
Workstation Stationalarmdevice
Decentralized ring*
Redundantstation computer / HMI
Firewall/VPN
Remote control center
Maintenance center
I/O
Proxy
Alternativemasterprotocols
GPS/Timeserver
Firewall/VPN
Gateway
OptionStation LAN
0 1 0
Router/ firewall/VPN
*Available Ethernet topologiesCentralizedring,decentralizedringormultiplenetworks
SAS 650 EnhancedAutomationSolution
The solution for the manned substation. Redundant station HMIs on a separate LAN are supplemented with an independent industrial gateway for remote control access.
FeaturesHighly reliable embedded industrial gateway for remote control −functionRedundant industrial station computer with HMI independent −of gatewaySeparate station LAN and IEC61850-8 network −Redundant station LAN −Basic monitoring and control −
OptionsPrinters for event printing and hardopy −Engineering and operator workstations −Time server with integrated GPS receiver −Router and firewalls with VPN functionality −Proxy to connect legacy protocols and I/Os to IEC61850 −
Station alarm device −Advanced monitoring functions −Advanced control functions −
Typical applications for SAS 650
Power UtilitiesSubtransmission and high voltage transmission level −
12 SAS 600 Series | Substation Automation Solutions
Advanced SAS
SAS 670
Remote control
Station HMI
Basic monitoring
Basic control
Advanced monitoring
Advanced control
Standard
Option
Independent embedded gateway
Redundant station HMI
Redundant gateway
*Available Ethernet topologiesCentralizedring,decentralizedringormultiplenetworks
SAS 670 AdvancedAutomationSolution
The solution for highest availability of local control. Redundant station computers and HMIs leave no room for single points of failure. Complementing these with integrated gateway functionality for remote control access gives you additional peace of mind.
FeaturesRedundant industrial station computer/HMI −Separate station LAN and IEC61850-8 network −Redundant station LAN −Basic monitoring and control −
OptionsRedundant gateway functionality for remote control −Printers for event printing and hardopy −Engineering and operator workstations −Single or redundant time server with integrated GPS receiver −Router and firewalls with VPN functionality −
Proxy to connect legacy protocols and I/Os to IEC61850 −Station alarm device −Advanced monitoring functions −Advanced control functions −
Typical applications for SAS 670
Power UtilitiesExtra-high voltage transmission substations −
IndustryComplex distribution substations of high importance −
I/O
Proxy
Alternativemasterprotocols
Workstation Redundantstation computer / HMI
Stationalarmdevice
Kiosk 1 Kiosk 2 Kiosk n...
IEC 61850-8-1Decentralized ring*
Hardcopyprinter
Eventprinter
GPS/Timeserver
Firewall/VPN
0 1 0
Gatewayfunctionality
Router/ firewall/VPN
Gatewayfunctionality
Router/ firewall/VPN
Remote control center
Maintenance center
Station LAN Option
Substation Automation Solutions | SAS 600 Series 13
Advanced SAS
SAS 690
Remote control
Station HMI
Basic monitoring
Basic control
Advanced monitoring
Advanced control
Standard
Option
Independent embedded gateway
Redundant station HMI
Redundant gateway
Kiosk 1 Kiosk 2 Kiosk n...
IEC 61850-8-1
Redundant station HMI
Redundant gateway
Decentralized ring*
Option
WorkstationHardcopyprinter
Eventprinter
GPS/Timeserver
Stationalarmdevice
Firewall/VPN
0 1 0
Gateway Router/ firewall/VPN
Gateway Router/ firewall/VPN
I/O
Proxy
Alternativemasterprotocols
Remote control center
Maintenance center
Redundantstation computer
Station LAN
SAS 690 AdvancedAutomationSolution
The fully redundant local and remote control solution meets even the highest availability requirements.
You are assured of the continuous controllability of your substation. After all, it is of prime importance.
FeaturesRedundant, highly reliable embedded industrial gateway −for remote control accessIndependent redundant industrial station computer with HMI −Separate station LAN and IEC61850-8 network −Redundant station LAN −Basic monitoring and control −
OptionsPrinters for event printing and hardopy −Engineering and operator workstations −Single or redundant time server with integrated GPS receiver −Router and firewalls with VPN functionality −Proxy to connect legacy protocols and I/Os to IEC61850 −
Station alarm device −Advanced monitoring functions −Advanced control functions −
Typical applications for SAS690
Power UtilitiesExtra-high voltage transmission substations −
IndustryComplex distribution substations of high importance −
*Available Ethernet topologiesCentralizedring,decentralizedringormultiplenetworks
14 SAS 600 Series | Substation Automation Solutions
*)NotavailableforSAS605
Primary equipment supervisionContinuous monitoring of switching −objectsDisplay of measurements −Access to control dialogues −
Sequence of eventsEvent list −Historical events −Filtering function −Export facilities −
ControlDialogues for switching objects and −tapchanger operationSingle and double commands −Analogue set values −
AlarmsAlarm list (persistent/fleeting alarms) −Alarm acknowledgement −User-defined alarm classes −Control of acoustic alarm −
Safety checksSelect-before-operate −Interlocking (bay and station-wide) −Synchrocheck −Double command blocking −
User management*Different levels of user authorization −Specific user group with access to −each individual objectUser-specific authorization profile −
MeasurementsDirect from VTs IEC, PTs ANSI and CTs −mA- and V-signals −Time-tagged at bay level −Statistics −
Blocking list*Summary display of current blocking −situation in the process databaseBlocking of alarms, events, updates, −control, printing and reprocessing
System supervisionAll bay and station level IEDs −Auxiliary devices (printer, etc.) −Communication network/links −
Calendar*Start time-related activities −Execution of activities during a cer- −tain time period, once or repetitivelyFlexible configuration, individual and −independent configuration per day
Primary equipment supervision
System supervision
Measurements
Blocking list
Control
Alarms
Secure operationSequence of events
Calender
User management
Basic functionalities
Primary equipment supervision
System supervision
Measurements
Blocking list
Control
Alarms
Secure operationSequence of events
Calender
User management
Basic functionalities
Primary equipment supervision
System supervision
Measurements
Blocking list
Control
Alarms
Secure operationSequence of events
Calender
User management
Basic functionalities
FarbeyondstationcontrolBasicfunctionalities
Substation Automation Solutions | SAS 600 Series 15
Dynamic busbar coloringDynamic coloring of the different −switchgear partsOne color per power source −Enhanced overview for complex −substations
TrendsShort-term observation and analysis −Assignment of any process values −Graphical or tabular representation −Calculation formulae −
Automatic sequencesExecution of pre-defined switching −sequencesSafety checks (same as for −switching of individual objects)Freely configurable sequences −
Measurement reportsStatistical measurement reports −stored in report databaseHourly/daily/weekly/monthly/yearly −reportTabular or graphical representation −Report data in ASCII or CSV format −Sum, mean, average, min., max. −
Load sheddingControl at bay level, configuration −and supervision at station levelStatic load shedding −Adaptive load shedding −
IED parameterizationConfiguration/parameter upload −from IEDChange of individual parameters −or parameter setsAccess to all IED parameters −
High-speed busbar transferChange-over of motor-feeding busbar −from normal to backup supply and vice versaControl at bay level, configuration −and supervision at station level
Disturbance record uploadManual upload −Cyclic upload −Event-driven upload −
External alarmingFax, voice message −SMS, pager system −E-mail −
Disturbance record analysisWaveform visualizations, signal −vectorsFault location, advanced calculation −Frequency deviation, apparent and −reactive power calculationAutomatic analysis −
Trip counter tableMaintenance information for CBs −Numbers of opening operations −Accumulated magnitude −of the trip currents
Trip counter tableIED parameterization
Automatic sequences
Trends
Dynamic busbarcoloring
Measurements reports
External alarming
Advanced functionalities
Disturbance record upload
Disturbance record analysis
Public PagingSystems Faxe-mail
TelephoneFixed
Station Computer
TelephoneMobile ShortMessages(SMS)
Trip counter tableIED parameterization
Automatic sequences
Trends
Dynamic busbarcoloring
Measurements reports
External alarming
Advanced functionalities
Disturbance record upload
Disturbance record analysis
Public PagingSystems Faxe-mail
TelephoneFixed
Alarm
Alarm
Station Computer
TelephoneMobile ShortMessages(SMS)
Alarm
Trip counter tableIED parameterization
Automatic sequences
Trends
Dynamic busbarcoloring
Measurements reports
External alarming
Advanced functionalities
Disturbance record upload
Disturbance record analysis
Public PagingSystems Faxe-mail
TelephoneFixed
Alarm
Alarm
Station Computer
TelephoneMobile ShortMessages(SMS)
Alarm
Trip counter tableIED parameterization
Automatic sequences
Trends
Dynamic busbarcoloring
Measurements reports
External alarming
Advanced functionalities
Disturbance record upload
Disturbance record analysis
Public PagingSystems Faxe-mail
TelephoneFixed
Station Computer
TelephoneMobile ShortMessages(SMS)
Trip counter tableIED parameterization
Automatic sequences
Trends
Dynamic busbarcoloring
Measurements reports
External alarming
Advanced functionalities
Disturbance record upload
Disturbance record analysis
Public PagingSystems Faxe-mail
TelephoneFixed
Alarm
Alarm
Station Computer
TelephoneMobile ShortMessages(SMS)
Alarm
Advancedfunctionalities
Contact us
ABB Switzerland Ltd Power SystemsBruggerstrasse72 CH-5400Baden,Switzerland Phone: +41585857744 Fax: +41585855577 E-Mail: substation.automation@ch.abb.com www.abb.com/substationautomation
1KHA-001069,vers.4-SEN
1000-10.09-PrintedinSwitzerland
©ABBSwitzerlandLtd,October2009.Therighttomodificationsordeviationsduetotechnicalprogressisreserved.
top related