제목 towards global eminence wi-fi connection program manual - khu wifi -
Post on 18-Jan-2018
222 Views
Preview:
DESCRIPTION
TRANSCRIPT
제목
Towards Global Eminence
Wi-Fi Connection Program Manual
- KHU WiFi -
제목 Towards Global Eminence
| 2 |
1.1 Download and Install Connection Program
1.2 Execution
Double click the [KHU WiFi] on the [Main
screen]
The [KHU WiFi] is also accessible by open-
ing [Start] → [All programs] → [KHU WiFi]
1.3 Wi-Fi connection (Login)
Choose the Wi-Fi [INTERFACE]
Choose [Profile – KHU Wi-Fi]
Click on the [Connect] button
※ The [Connect] button is visible after
choosing the [Profile]
Click [OK] after inputting [ID, PASSWORD]
※ Type in the Kyunghee University
Information System ID/Password
1. KHU WiFi Execution
1
23
제목 Towards Global Eminence
| 3 |
1.4 Main screen after successful connection (authentication login)
Authentication information (AP information, SSID, Connection speed,
MAC address, IP address, etc) is viewable after successful connection
has been made through proper information input. A successful connection
will show a “Network connected” pop-up message on the lower right bar
of the screen.
The pop-up message will disappear in 3 seconds after successful authen-
tication.
1.5 Main screen after successful connection (authentication login)
The KHU WiFi Icon, located in the lower tray will turn red and show a sig-
nal bar, after connection.
Hovering the mouse over the KHU WiFi Icon will show a “Connection es-
tablished” message.
Double-click the KHU WiFi Icon to open the program window.
1. KHU WiFi Execution
제목 Towards Global Eminence
| 4 |
1.6 How to save ID/Password
Click [Profile settings]
Click [KHU-Wi-Fi] → [authentication method] →
[ID/Password save] → Type [ID/Password] →
finally click [SAVE] and [Close]
Saving the ID/Password will reduce inconve-
nience of manually re-entering the ID/Pass-
word during re-boot.
2. Hover the mouse over the KHU WiFi Icon, located
in the disconnect or lower close tray (or in the
Hidden Icon section) and right click and choose
[Open CUVIC]
Click the [Disconnect] button
The program will close after clicking [close]
Re-read from [Execute 1.1] for a new connec-
tion.
2. Disconnection and Close
23
4
5
6
1
top related