amethyst ip v. uniden america

7/30/2019 Amethyst IP v. Uniden America

1/37

IN THE UNITED STATES DISTRICT COURT

FOR THE EASTERN DISTRICT OF NEW YORK

___________________________________

Amethyst IP, LLC

Plaintiff, Civil Action No. ______________

v. JURY TRIAL DEMANDED

Uniden America Corporation

Defendants.

___________________________________

COMPLAINT

Plaintiff Amethyst IP, LLC (Amethyst), for its Complaint against Defendant Uniden

America Corporation (Uniden) hereby alleges as follows:

The Parties

1. Plaintiff Amethyst is a New York limited liability company with its principal

place of business at 1225 Franklin Avenue, Suite 325, Garden City, New York 11530.

2. On information and belief, Uniden is a Delaware corporation. On information

and belief, Unidens registered agent in the State of Delaware is The Corporation Trust

Company, Corporation Trust Center, 1209 Orange Street, Wilmington, DE 19801.

Nature of the Action

3. This is a civil action for the infringement of United States Patent No. 7,425,901

(the 901 patent) (attached as Exhibit A).


2/37


3/37

3

Count I

Infringement of U.S. Patent No. 7,425,901

9. Paragraphs 1-8 are incorporated by reference as if fully restated herein.

10. Uniden has infringed, and continues to infringe, the 901 patent.

11. Uniden indirectly infringed, and continues to indirectly infringe, the 901 patent

under 35 U.S.C. 271(b) or (c), either literally and/or under the doctrine of equivalents, by

making, using, offering for sale, selling, and/or importing into the United States camera products

as claimed in the 901 patent including at least the UBW2101 (Camera Products), along with a

SD memory card (Memory Product, and together with the Camera Products, the 901

Infringing Products).

12. On information and belief, Uniden's customers, resellers and distributors directly

infringe the 901 patent under 35 U.S.C. 271(a), either literally and/or under the doctrine of

equivalents by making, using, selling, and/or offering for sale the 901 Infringing Products in the

United States. Further, to the extent that Uniden itself uses Camera Products with Memory

Products in the United States, Uniden directly infringes the 901 patent under 35 U.S.C. 271(a),

either literally and/or under the doctrine of equivalents.

13. On information and belief, Uniden actively, knowingly and intentionally (from at

least the date of the service of this Complaint) induces infringement of the 901 patent under 35

U.S.C. 271(b) by making, using, offering for sale, and selling Camera Products, as well as by

contracting with others to use, market, sell, and offer to sell Camera Products.

14. On information and belief, Uniden has also contributed to the infringement by

others (e.g., Uniden's customers and the users of 901 Infringing Products), and continues to


4/37

4

contribute to infringement by others under 35 U.S.C. 271(c), by selling, offering to sell, or

importing Camera Products into the United States, knowing (from at least the date of the service

of this Complaint) that those systems constitute a material part of the inventions of 901

Infringing Products, knowing (from at least the date of the service of this Complaint) those

systems to be especially made or adapted to infringe the 901 patent, and knowing (from at least

the date of the service of this Complaint) that those systems are not staple articles or

commodities of commerce suitable for substantial noninfringing use.

15. By way of example, the Uniden User Manual that ships with the UBW2101

instructs customers to install a SD card to enable the recording functionality of the UBW2101.

A copy of this User Manual is attached as Exhibit B.

16. Amethyst has been and continues to be damaged by Uniden's infringement of the

901 patent.

Prayer For Relief

Wherefore, Plaintiff Amethyst respectfully requests that this Court enter judgment

against Uniden as follows:

a) adjudging that Uniden has infringed, induced infringement of, and/or contributory

infringed, literally or under the doctrine of equivalents, U.S. Patent No. 7,425,901;

b) adjudging that Uniden's infringement has been willful;

c) awarding Amethyst the damages to which it is entitled under 35

U.S.C. 284 for Uniden's past infringement and any continuing or future infringement up until

the date Uniden is finally and permanently enjoined from further infringement, including both


5/37

5

compensatory damages and enhanced/treble damages for willful infringement, and ordering a

full accounting of same;

d) finding that this case is exceptional under 35 U.S.C. 285;

e) ordering injunctive relief under 35 U.S.C. 283;

f) awarding Amethyst pre-judgment and post-judgment interest on its damages; and

g) awarding Amethyst such other and further relief in law or equity that

the Court deems just and proper.

Demand For Jury Trial

Amethyst hereby demands a trial by jury on all claims and issues so triable.

DATED: September 3, 2013 Respectfully submitted,

/s/ Mark I. Koffsky .Mark I. Koffsky

MARKI. KOFFSKY, P.C.1225 Franklin Avenue, Suite 325

Garden City, New York 11530

Phone: (516) 279-5595Fax: (516) 279-5596

[email protected]

Counsel for Plaintiff


6/37

Exhibit A


7/37


8/37


9/37


10/37


11/37


12/37


13/37


14/37


15/37

Exhibit B


16/37

If any items are missing or damaged, contact our Customer Care Line

immediately. Never use damaged products!

Need Help? Get answers 24/7 at our website: www.uniden.com.

3.5 LCD Portable Wireless

Baby Monitoring System

UBW2101


17/372

Important Safety Precautions

This manual contains important information about this productsoperation. If you are installing this product for others, you must leavethis manual or a copy with the end user.

When using your equipment, always follow basic safety precautions to reduce theULVNRIUHHOHFWULFVKRFNDQGLQMXU\WRSHUVRQVLQFOXGLQJWKHIROORZLQJ

x This equipment is NOT waterproof. DO NOT expose it to rain or moisture.

x DO NOT immerse any part of the product in water. Do not use this product nearwater, e.g., near a bath tub, wash bowl, kitchen sink or laundry tub, in a wetbasement or near a swimming pool.

x To avoid any risk of electric shock from lightning, avoid handling any electronicdevices (except battery-powered ones) during an electrical storm.

x Use only the power cord and/or batteries indicated in this manual. Never disposeRIDQ\EDWWHULHVLQDUHDVWKH\PD\H[SORGH&KHFNZLWKORFDOFRGHVIRUSRVVLEOHspecial disposal instructions.

x Never tug or pull on any power cord; be sure to leave some slack in the cord whenplacing your equipment, and always use the plug to unplug cord from the walloutlet.

x Never leave power cords where they can become crushed, cut, or frayed; whenrunning power cords, avoid letting them rub against any sharp edges or lie acrossDQ\KLJKWUDIFDUHDVZKHUHSHRSOHPLJKWWULSRYHUWKHP

x Do not use the device if the adapter cords or plugs have been damaged, the unithas been exposed to liquids, or the unit has been dropped, or is damaged.


18/373

Important Safety Precautions (contd)

Warnings to Parents and Other UsersFailure to follow these warnings and the assembly instructions could result inVHULRXVLQMXU\RUGHDWK7KLVSURGXFWLVQRWGHVLJQHGRULQWHQGHGIRUXVHDVDmedical monitor, nor should this product be used as a substitution for medical orparental supervision. Always be sure that both the transmitter and receiver are

working properly, and are within range of each other.

x STRANGULATION HAZARD. Keep the adapter cords out of the reach of children.

x :$51,1*.((32872)7+(5($&+2)&+,/'5(17KLVSURGXFWLVQRWDWR\and is not intended for use by any children under the age of 13. If you are betweenthe ages of 13 and 18, review these terms, conditions and safety warnings withyour parents or guardian to make sure that you and your parent or guardianunderstand these terms, conditions, and safety warnings.

x Allow for proper ventilation when units are in use. Do not cover the camera orUHFHLYHUZLWKDQ\REMHFWVXFKDVDEODQNHW'RQRWSODFHLWLQDGUDZHURULQDQ\ORFDWLRQZKLFKZRXOGPXIHWKHVRXQGRULQWHUIHUHZLWKWKHQRUPDORZRIDLU

SAVE THESE INSTRUCTIONS!

For best results:7RDYRLGGDPDJHWR\RXUHTXLSPHQWIROORZWKHVHVLPSOHSUHFDXWLRQV

x Do not drop, puncture or disassemble any part of the equipment. There are nouser-serviceable parts inside.

x Do not expose the equipment to high temperatures, and avoid leaving the equip-ment in direct sunlight for more than a few minutes. Heat can damage the case orelectrical parts.

x Do not place heavy items on top of the equipment or expose the equipment toheavy pressure.

x Remove the power adapter during long periods between usages.

x &OHDQRQO\ZLWKDGU\FORWK

Failure to follow the instructions in this operating manual will void thewarranty. Uniden assumes no liability for damages to property or injuryto persons caused by improper handling or failure to comply with thesesafety instructions.


19/374

Contents

Whats in the Box?['LJLWDO:LUHOHVV&DPHUD

[/&''LJLWDO:LUHOHVV0RQLWRU

[$&$GDSWHUIRU&DPHUD

[$&$GDSWHUIRU0RQLWRU

[*RRVH1HFN&DPHUD6WDQGZLWKPRXQWVFUHZV

[2ZQHUV0DQXDO

B If any items are missing or damaged, contact our Customer Care Line immediately!

Important Safety Precautions .............................................................2

Whats in the Box .................................................................................4

Parts of the Baby Monitoring System ................................................5

Getting Started .....................................................................................6

Step 1. Set-up and Installation ..........................................................6

Step 2. Basic Operation .....................................................................7

,*HWWR.QRZWKH&DPHUD ................................................................7

,,*HWWR.QRZWKH/&'0RQLWRU........................................................8

Step 3. Advanced Operation ..............................................................9

I. Get to Know the Display Icons .......................................................9

,,*HWWR.QRZWKH0DLQ0HQX ........................................................10

System Setup - Time Setting/Factory Defaults ...........................10

&DPHUD6HWXS7XUQ&DPHUDV212))&DPHUD6FDQ3HULRG

3DLULQJD&DPHUD3RZHU6DYH0RGH6'&DUG)RUPDW ............... 12

92;6HWWLQJ92;6HQVLWLYLW\(QDEOH92;5HFRUGLQJ ............... 13Brightness ................................................................................... 13

$ODUP6HWXS(YHQW/LVW................................................................14

About Digital Wirless Technology ................................................... 15

Troubleshooting Guide ......................................................................16

Product Specications ......................................................................17

6WRUDJH0HGLD0DQDJHPHQW...............................................................17

/LWKLXP3RO\PHU%DWWHU\:DUQLQJ .......................................................17

Recycling and Disposal Information ....................................................17

FCC Compliance Information ........................................................... 18

3DUW&RPSOLDQFH6WDWHPHQW .......................................................... 18 5)([SRVXUH,QIRUPDWLRQ................................................................... 18

,&&RPSOLDQFH,QIRUPDWLRQ ................................................................ 18

5DGLR(TXLSPHQW1RWLFH .................................................................... 18

&(&RPSOLDQFH,QIRUPDWLRQ............................................................... 18

One Year Limited Warranty .............................................................. 19


20/375

Parts of the Baby Monitoring System

Camera

1. Lens

2. ,5,QIUDUHG/('V

3. Light Sensor

4. Battery Indicator5. Link Indicator

6. 3RZHU,QGLFDWRU

7. 3RZHU/XOODE\SOD\VZLWFK

8. 3DLULQJ.H\

9. Reset

10. '&,1-DFN11. 3RZHU$GDSWHU

12. *RRVH1HFN0RXQW6WDQG

LCD Monitor (Receiver)

1. Battery Indicator

2. 3RZHU,QGLFDWRU

3. &XUVRUXS&KDQQHOVZLWFK

4. &XUVRUOHIW9ROXPHGRZQ

5. &XUVRUGRZQ/XOODE\SOD\EXWWRQ

6. &XUVRUULJKW9ROXPHXS

7. (QWHU([LW0HQXEXWWRQ

8. Record/Delete

9. 3773XVKWR7DON2.

10. 3RZHUEXWWRQ

11. SD card slot

12. USB port (reserved use)

13. '&,1MDFN

14. Reset

15. 3RZHU$GDSWHU

DCIN5V/1APWR.

13

BSU


21/376

Getting Started

Step 1. Connection & Installation

Camera Connection

2

DCIN5V/1A

1

1. &RQQHFWWKHSRZHUFDEOHWRWKHFDPHUDV'&,1MDFNDQGWKHQ

plug the power adapter to a

VWDQGDUG9$&ZDOORXWOHW

2. Slide the power switch downonce to turn ON the camera.

B The built-in Lithium-Polymer battery charges automatically when thepower adapter is connected. Charge the battery to full capacity beforeusing the monitor in portable mode. The battery is at full capacity whenthe green battery indicator turns off.

B Only use the 5V/1A power adapter provided in the package.

LCD Monitor Connection

2

1

1. &RQQHFWWKHSRZHUFDEOHWRWKHPRQLWRUV'&,1MDFNDQGWKHQ

plug the power adapter to a

VWDQGDUG9$&ZDOORXWOHW

2. 3UHVVWKHSRZHUEXWWRQWRWXUQON the monitor.

B The built-in Lithium-Polymer battery charges automatically when thepower adapter is connected. Charge the battery to full capacity before

using the monitor in portable mode.

B In portable mode, charge the battery when the battery indicator lightsup red.

B Only use the 5V/1A power adapter provided in the package.


22/377

Getting Started (contd)

Installing the Camera on the Goose Neck Mount StandUse the goose neck mount stand to install the camera at an appropriate angle

in a semi-permanent (desktop mount option) or permanent (wall mount option)

location.

B Ensure the install location is within range of a standard 120 V AC walloutlet.

Lock Nut

Cord Guides

Desktop mount option

1. Select the position for the camera

and secure the camera stand.

Wall mount option

1. Select the position for the

mount stand and mark out

the mount holes. The two wall

screws should be spaced 1-5/8in. (40mm) apart. Screws and

anchors are supplied, but if

necessary, use an appropriate

screw type for the mounting

surface.

2. 0RXQWWKHFDPHUDRQWRWKHbracket, but do not tighten.

3. $GMXVWWKHFDPHUDWRWKHSURSHUYLHZDQJOH0DNHVXUHWKHOHQVLVXSULJKWUHODWLYHWR\RXUVXEMHFW

then tighten the lock nut to secure

the camera.

4. &RQQHFWWKH$&DGDSWHUDQG

route the cord along the guides in

the stand.

5. $WWKH/&'PRQLWRUDGMXVWWKH

antenna to an upright position.

Step 2: Basic Operation

I. Get to Know The Camera

DCIN 5V/1APWR.


23/378

Step 2: Basic Operation (contd)

1) Battery Indicator

Green LED:%DWWHU\FKDUJLQJFKDUJHEDWWHU\XQWLOJUHHQ/('WXUQVRII

Red LED: Battery low (portable mode); camera will turn off within 3 minutes.

&RQQHFWWKHSRZHUDGDSWHUIRUFKDUJLQJRUFRQWLQXRXVXVH

LED off%DWWHU\IXOO\FKDUJHG

2) Link Indicator

Flashing LED:3DLULQJVHTXHQFHLVLQSURFHVV6HH$GYDQFHG2SHUDWLRQ

3DLULQJ&DPHUDVHFWLRQDVDJXLGH

Blue LED:&DPHUDLVSLFNHGXSE\WKH/&'PRQLWRU

LED OFF:&DPHUDLVLQVWDQGE\PRGH

3) Power Indicator

/('WXUQV21ZKHQFDPHUDLVSRZHUHG21

4) Power / Lullaby Play Switch

Slide down once to power ON the camera. To power OFF, slide down andhold the switch for 2 seconds, until the power indicator turns off. After power

on; slide down to turn on the lullaby play of the camera, slide & hold ~2-3

seconds to turn off.

5) Link Button

3UHVVWRSDLUWKHFDPHUDZLWKWKH/&'PRQLWRU

6HH$GYDQFHG2SHUDWLRQ3DLULQJ&DPHUD

II. Get to Know the LCD Monitor

1) Battery IndicatorGreen LED:%DWWHU\FKDUJLQJFKDUJHWKHEDWWHU\XQWLOWKHJUHHQ/('WXUQV

off.

Red LED: Battery low (portable mode); monitor will turn off within 3 minutes.

&RQQHFWWKHSRZHUDGDSWHUIRUFKDUJLQJRUFRQWLQXRXVXVH

LED off: Battery fully charged.

2) Power Indicator

/('WXUQV21ZKHQPRQLWRULVSRZHUHG21

B LED remains ON while LCD display is OFF in Power Save mode.

BSU

10

9

86

5

4

3

2

7

1


24/379

Standard View Mode Menu Mode Quad View Mode

3) 9LHZ1H[W&DPHUD&+ &XUVRU8S +RW.H\&+

4) Volume Down &XUVRU/HIW +RW.H\&+

5) /XOODE\3OD\6ZLWFK &XUVRU'RZQ +RW.H\&+

6) Volume Up &XUVRU5LJKW +RW.H\&+

7) (QWHU0HQX0RGH (6&EDFN

8) 0DQXDO5HFRUG Delete Record File9) 3XVKWR7DON 2.FRQUP

10) 3RZHU%XWWRQ

3UHVVWRWXUQSRZHU21SUHVVDQGKROGIRUVHFRQGVWRWXUQSRZHU2))

Step 3: Advanced Operation

I. Get to Know the Display Icons

a. Signal Indicator f. VOX VOX ON

b. &XUUHQW&KDQQHO,QGLFDWRU g. VOX Alarm ON

c. 6'&DUG h. %DWWHU\/RZ,QGLFDWRU&DP

- available i. 3XVKWRWDON,QGLFDWRU

- locked j. System Time

IXOODVKLQJ k. 3

Volume Bar

HUURUDVKLQJ

d. 5HFRUGLQGLFDWRUDVKLQJB Volume bar is green when camera lullaby

volume is adjusted.

e. /XOODE\3OD\,QGLFDWRUB Volume bar is blue when monitor volume

is adjusted.

/XOODE\0XWH,QGLFDWRU

a b c d e f g h

i

j

VOX

k

3


25/3710

Advanced Operation (contd)

II. Get to Know the Main Menu

1. 3UHVVMENU in standard viewmode to display the main menu (theexample shows the menu with theBrightness option highlighted).

2. Use / / / to highlight amenu option.3UHVVOK to enterthe setting menu.

3. Use / to select a setting ifnecessary.

4. 3UHVVESC to go back or exit themenu.

System Setup - Time Setting

6HWWKHGDWHDQGWLPHXVHGIRU(YHQW

List recording.

1. Use / / / to highlighta menu option.

2. 3UHVVOK to save.

System Setup - Set to Factory Default

1. Use / / / to highlighta menu option.

2. 3UHVVOK to save.


26/3711


II. Get to Know the Main Menu

Camera Setup 7XUQ&DPHUDV2Q2II

1. Use / to select the camerayou want to turn off.

2. 3UHVVOK to change ON/OFFstatus.

B Make sure available cameras are set toON for SCAN or Quad mode.

Camera Setup&DPHUD6FDQ3HULRG

Pairing - Pairing a Camera

1. Use / to change Scan Timeinterval from OFF/5 sec/15 sec/

Quad.

2. 3UHVVOK to confirm the settings.

B To leave Quad display, simply pressdirectional keys to enter single channelview.

&$0 &$0

&$0 &$0

B When the system enters into powersave mode from Quad, press any key toresume monitor view.


27/3712


II. Get to Know the Main Menu (contd)

Pairing3DLULQJD&DPHUD

1. Use / to select a channel.2. 3UHVVOK to start system

countdown from 60 seconds.3. Within the 60 second countdown,

press PAIR at the camera side. Thecamera signal will display whenpairing is complete.

Power Saving3RZHU6DYLQJ

Use / WRWXUQ3RZHU6DYLQJmode ON/OFF. If VOX is turned on,

the receiver and camera will come

RXWRI3RZHU6DYHPRGHZKHQVRXQG

is detected according to the set

sensitivity level. This means at night,

WKHPRQLWRU/&'ZLOOEHRIIEXWZLOO

automatically turn on when a noise is

detected.

B By setting Power Saving mode ON, bothreceiver and camera will enter standbymode after 2-minute idle time, andspeaker volume will be muted. Pressthe power key of the receiver to resume

monitoring, and camera key to entersingle channel view.

SD Card Format6'&DUG)RUPDW

Use / to select No or Yes.

B For first time use, it is stronglyrecommended to format the SD card.


28/3713



VOX Setting- VOX Sensitivity (VOX is voice activation)

Use / WRDGMXVWWKH92;sensitivity level.

Level 1 - low sensitivity.

Level 3 - high sensitivity.

B At OFF setting, the VOX function isdisabled.

VOX Setting(QDEOH92;5HFRUGLQJ

When set to ON, the system will

auto record for 30 seconds when the

camera is triggered by voice.

B Please set VOX sensitivity to level 1~3 toenable use of this function.

Brightness - Brightness

3UHVVOK to enter the camera

EULJKWQHVVDGMXVWPHQWEDUSUHVV

/ WRDGMXVWWKHEULJKWQHVVRIWKHcurrent channel.


29/3714



Alarm Setup - Alarm Setup

1. Use / to move between theitems.

2. 3UHVVOK to shift to ON/OFF.

VOX alarm ON7KHPRQLWRUZLOOJLYH

an alarm for 15 seconds when the

camera is triggered by voice.

Battery low alarm ON7KHPRQLWRU

will give an alarm for 15 seconds

when the camera battery is low.

Out of range alarm ON7KHPRQLWRU

will give an alarm for 15 seconds

when the monitor and camera(s) are

out of wireless transmitting range.

Event List(YHQW/LVW

Playback Mode

1. 3UHVVOK to enter the Record

folder.

2. 3UHVVOKDJDLQWR3OD\3DXVHDfile.

3. 3UHVV to fast forward the videoclip.

4. 3UHVVto rewind the videoclip.5. 3UHVVESCWR6WRS([LW

Managing the Event List

1. Use / to select the record fileyou want to delete.

2. 3UHVVDEL to enter delete mode.

3. Use / to select Yes or No.

4. 3UHVVOK to delete.

B Recording files will be saved every 30seconds if recording time exceeds 30seconds.

5HFRUGLQJIROGHUIRUPDWLV\HDUPRQWKGD\([DPSOH-DQ,QGLYLGXDOO\UHFRUGHGOHIRUPDWLVLQDKRXUIRUPDWKRXUPLQXWHVVHFRQGV

([DPSOHBSPFDPHUD


30/3715

About Digital Wireless Technology

This section offers some helpful information to overcome most problems youmay encounter.

Problem Diagnosis

About 2.4GHz Digital Wireless Signal

This innovative digital wireless solution integrates advanced Frequency Hopping

Spread Spectrum (FHSS) technology. This technology greatly reduces the

interference that comes from other devices using the same radio frequency

(2.4GHz), e.g. WIFI, Bluetooth, cordless phone...etc. You can now experience

LPSURYHGZLUHOHVVVXUYHLOODQFHTXDOLW\ZLWKRXWLFNHUDQGQRLV\LPDJHV

However, weaker signals (lag or still image) may be observed from time to time,

GHSHQGLQJRQWKHHQYLURQPHQWZKHUHWKHV\VWHPLVLQVWDOOHG&RPSOLHVZLWK)&&

SDUW(76,(1DXGLRYLGHRVLJQDOVWUDQVPLWWHGRXWXSWRDERXW

500 foot (150 meters) line of sight can be supported. Line of sight installation

though, is usually not a common practice. Factors affecting the transmission

include microwave ovens or other high frequency electromagnetic waves.

Reinforced concrete walls, large scale metal products, and metal furniture should

not be located near the camera or the monitor unit. Do not place near water.3HUVRQZDONLQJE\PD\FDXVHXQVWDEOHVLJQDOTXDOLW\

How to improve the wireless signal quality

If possible, remove obstacles in between the camera or the monitor that might

UHHFWWKHVLJQDO7KHVHFRXOGLQFOXGHIXUQLWXUHFDELQHWVHWF,I\RXIHHOWKH

ZLUHOHVVVLJQDOLVQRWJRRGHQRXJKSODFHWKHPRQLWRUDWDQHZDQJOHUHDGMXVW

its position to make an improvement, or simply move the camera closer to the

monitor.

Why Image Compression?

In order to provide a private and interference free wireless service, this

GLJLWDOZLUHOHVVVROXWLRQZRUNVRQD0%QDUURZKRSSLQJEDQG'LIIHUHQWIURP

traditional 2.4GHz analog signal, this digital wireless signal is compressed and

SUHVHQWHGDV0RWLRQ-3(*0-3(*IRUPDW%\GLJLWL]LQJDQGFRPSUHVVLQJ

WKHUDZDQDORJGDWDWKHEDQGZLGWKLVXVHGPRUHHIFLHQWO\DQGVHFXUHO\

&RQVHTXHQWO\\RXPLJKWREVHUYHDQLQGHQWLPDJHOLQHLIWKHVLJQDOLVYLHZHGRQ

a larger display monitor or plasma TV.


31/3716

Troubleshooting Guide

,I\RXKDYHDQ\WURXEOHZLWK\RXUEDE\PRQLWRUFKHFNWKLVVHFWLRQUVW,I\RX

need help, visit the customer support page of our website listed on the front

cover.

Problems Possible Causes Remedies

System

message

shows

NO Signal

No power supply to

camera (Battery low)

&KHFNSRZHUDGDSWHUDQGSRZHU

cable connection, or battery has run

out.

&DPHUDLVQRWSDLUHG

with receiverSee pairing operation for detail.

Service out of range0RYHWKHFDPHUDFORVHUWRWKH

monitor.

Signal being blocked

,ISRVVLEOHUHPRYHPDMRUREVWDFOHV

in between the camera and monitor,

or relocate the camera to a different

location.

Low signal

or unstable

signal

Antenna directionallimitation

$GMXVWFDPHUDDQGPRQLWRUSRVLWLRQ.

Signal being blocked

,ISRVVLEOHUHPRYHPDMRUREVWDFOHV

in between the camera and monitor,

or relocate the camera to a different

location.

Strong radio

signal nearby

Keep WiFi router away from the

camera and/or monitor.

Strong

electromagnetic

interference nearby

Keep working motors (hair dryer/

electric heater/air conditioner/water

pump) or microwave oven away from

the camera and/or monitor.

Recording

does not

work

No SD card Insert SD card into SD card slot.

SD card locked Unlock the SD card.

Black screen

& buttons are

not

functioning

3RZHUVDYH mode on

3UHVVthe power key to resume

receiving the image. 3lease refer to

3RZHU6DYLQJ section on page 12 for

details.

Audio

feedback

&DPHUDDQG receiver

are too close

The camera has a high sensitivity

microphone. Keep the camera at least

10 feet away from the receiver. If the

camera must be within 10 feet of the

receiver, keep the volume down.VOX Record

& Alarm do

not work

92;0HQX set to

OFF

Set VOX Sensitivity/VOX Alarm/VOX

Record to ON.


32/3717

Product Specication

Camera Unit Monitor Unit

0D[LPXP&KDQQHOV 4

&RPPXQLFDWLRQ

Range500 feet (300 m) in open space

Resolution 320 x 240 (QVGA)

Operating

Temperature&)a&)

Operation Voltage '&9$ '&9$

&XUUHQW

&RQVXPSWLRQ680 mA (max) 680 mA (max)

Night Vision 10 feet (3 m)

Dimensions2.4 in (60mm) (W)4.6 in. (116mm) (H)

1.3 in (32mm) (D)

5.1 in (130mm) (W)3.5 in (90mm) (H)

1.1 in (27mm) (D)

Storage Media Management

SD Card Capacity Recording Time

1 GB 130 minutes

2 GB 170 minutes

8 GB 1050 minutes

16 GB 2100 minutes

Lithium-Polymer Battery Warningx 7KHUHFHLYHUFRQWDLQVDQRQUHPRYHDEOHUHFKDUJHDEOH/LWKLXP3RO\PHU

battery.

x 'RQRWWU\WRFKDUJHWKHEDWWHU\LQWHPSHUDWXUHVEHORZ&)RUKLJKHUWKDQ&)

x Dispose of this equipment according to the instructions.

x Do not open the receiver or mutilate the battery.

x The rechargeable battery contained in this receiver may explode if disposed ofLQDUH

x Do not short-circuit the battery.

x 'RQRWFKDUJHWKHUHFKDUJHDEOHEDWWHU\ZLWKDQ\$&DGDSWHURWKHUWKDQWKHone provided. Using another adapter may damage the battery or cause thebattery to explode.

B Rechargeable batteries must be recycled or disposed of properly.

Recycling and Disposal Informationx Do not dispose of electronic devices or any of their components (especially

EDWWHULHVDQG/&'GLVSOD\VLQ\RXUPXQLFLSDOWUDVKFROOHFWLRQ

x &RQVXOW\RXUORFDOZDVWHPDQDJHPHQWDXWKRULW\RUDUHF\FOLQJRUJDQL]DWLRQOLNH(DUWKFRPWRQGDQHOHFWURQLFVUHF\FOLQJIDFLOLW\LQ\RXUDUHD

x If you are unable to locate proper recycling facilities in your area, please returnthis product to Uniden for recycling.


33/3718

FCC Compliance Information

Part 15 Compliance Statement7KLVGHYLFHFRPSOLHVZLWK3DUWRIWKH)&&5XOHV2SHUDWLRQLVVXEMHFWHGWRWKHIROORZLQJWZRFRQGLWLRQVWKLVGHYLFHPD\QRWFDXVHKDUPIXOLQWHUIHUHQFHDQG(2) this device must accept any interference received, including interference thatmay cause undesired operation.

7KLVHTXLSPHQWKDVEHHQWHVWHGDQGIRXQGWRFRPSO\ZLWKOLPLWVIRUD&ODVV

%GLJLWDOGHYLFHSXUVXDQWWR3DUWRIWKH)&&UXOHVDQG(76,(1These limits are designed to provide reasonable protection against harmfulinterference in residential installations. This equipment generates, uses, and canradiate radio frequency energy, and if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause interference to radio or televisionequipment reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one or more of theIROORZLQJPHDVXUHV

x Reorient or relocate the receiving antenna.

x 0RYHWKHHTXLSPHQWDZD\IURPWKHUHFHLYHU

x 3OXJWKHHTXLSPHQWLQWRDQRXWOHWRQDFLUFXLWGLIIHUHQWIURPWKDWWRZKLFKWKH

receiver is connected.x &RQVXOWWKHGHDOHURUDQH[SHULHQFHGUDGLRWHOHYLVLRQWHFKQLFLDQIRUDGGLWLRQDOsuggestions.

CAUTION! Any changes or modifications to this equipment notexpressly approved by the party responsible for compliance could voidyour authority to operate the equipment.

RF Exposure InformationThe antenna used for this transmitter must be installed to provide a separationdistance of at least 20 cm (7.9) from all persons and must not be collocated orRSHUDWLQJLQFRQMXQFWLRQZLWKDQ\RWKHUDQWHQQDRUWUDQVPLWWHU

IC Compliance InformationRadio Equipment Notice7KHWHUP,&EHIRUHWKHUDGLRFHUWLFDWLRQQXPEHURQO\VLJQLHVWKDW,QGXVWU\&DQDGDWHFKQLFDOVSHFLFDWLRQVZHUHPHW2SHUDWLRQLVVXEMHFWWRWKHIROORZLQJWZRFRQGLWLRQVWKLVGHYLFHPD\QRWFDXVHLQWHUIHUHQFHDQGWKLVGHYLFHmust accept any interference, including interference that may cause undesiredRSHUDWLRQRIWKHGHYLFH3ULYDF\RIFRPPXQLFDWLRQVPD\QRWEHHQVXUHGZKHQusing this device.

CE Compliance Information

3URGXFWVZLWK&(0DUNLQJFRPSO\ZLWK(0&'LUHFWLYH(&ORZYROWDJH'LUHFWLYH((&577((&LVVXHGE\WKH&RPPLVVLRQRIWKH(XURSHDQ&RPPXQLW\&RPSOLDQFHZLWKWKHVHGLUHFWLYHVLPSOLHVFRQIRUPLW\WRWKHIROORZLQJ(XURSHDQ1RUPV

x (0&(1

x /9'(1

x 5DGLR(1


34/3719

One Year Limited Warranty

Important: Evidence of original purchase is required for warrantyservice.

:$55$172581,'(1$0(5,&$&25325$7,218QLGHQ

(/(0(1762):$55$17


35/3720


36/3721


37/37

amethyst ip v. uniden america

Documents