alu preventive maintenance
TRANSCRIPT
8/13/2019 ALU Preventive Maintenance
http://slidepdf.com/reader/full/alu-preventive-maintenance 1/14
GSM BSS Network Audit Table
Name _________________
UPI____________________
Location_____________________
Department_______________________
Date ________________________
Date: 20 06 2013
8/13/2019 ALU Preventive Maintenance
http://slidepdf.com/reader/full/alu-preventive-maintenance 2/14
No. Items to Check Date StatusProposed
Frequency
1Ensure all BSS have completed, accurate network
topologyEvery 3 months
2 OMC system's hardware configuration table Every 3 months
3 MFS system hardware configuration table Every 3 months
4 All BSC have completed software backup Weekly
5Record software version, Patches detailed information for
all BSC, BTS, OMCR, MFSMonthly
6 Check the MFS backup (MIB backup + system backup) Weekly
7 OMC-R Full Backup Monthly
8 Backup History Alarm and Current alarm Monthly
1Check and clear all BSC Module
(OMCP,SSW,CCP,TPGSM,MUX,LIU etc.) AlarmDaily
2 Check and clear all Highway and A interface alarm Daily
3Ensure all BSC do not have any CLOCK alarm and NTP
alarmDaily
4
Check all MT120 on TC rack and ensure they are
working well and normal traffic carried, FAN works well,
check and clear the alarm on each module
Weekly
5
Check and clear all NO-Q1-CONNECTION alarm,
ensure QMUX setup on BTS, TC are same with it on
BSC side.
Monthly
6Check BSC internal module time (OMCP, CCP, TP) and
check all BSC ntp synchronization level setupMonthly
7execute and check the mx_chkSanity and mx_shelfAudit
scripts output.Monthly
8 Ensure All SS7 links are working well Monthly
Annex: PREVENTIVE MAINTENANCE
1 BSS network part
2 BSC and TC part
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not CheckOk Nok Not Check
Ok Nok Not Check
Ok Nok Not CheckOk Nok Not Check
Ok Nok Not CheckOk Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not CheckOk Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
8/13/2019 ALU Preventive Maintenance
http://slidepdf.com/reader/full/alu-preventive-maintenance 3/14
1
OMCR Maintenance people must keep available tape,
disk and installation disk, and must know the welcome
centre number and call WC when there is any hardware
problem
Weekly
2Ensure the server and disk array work well and no any
alarmWeekly
3Ensure the connection between OMC and MFS, BSC are
stableDaily
4 Delete unused PRC Weekly
5Check OMCR file system, delete unused file when it meet
the safety limitWeekly
6Check OMCR and CISCO router
configuration(especially for X25)Weekly
7Check all menu can be opened in OMCR and can operate
every BSC (random select some BSC to test)Monthly
8OMCR can collect traffic measurement report for all BSC
and MFSDaily
9 OMCR can backup all BSC DLS file and entire BSSsoftware package
Weekly
10Execute entire network each BSC Discover, ensure
Discover successfully completedWeekly
11 Correct Inconsistency Weekly
12 Check OMCR ntp synchronization level setup Weekly
13
check:/alcatel/omc3/migration/script/OMC_checks.pl -y Monthly
14Kill all application open by users (perform at midnight,
there no action on OMCR)Weekly
15 Manual Clean-up of files if f ile system is full or files areno longer needed
Monthly
16 Manual delete unused PRC Weekly
17 Reboot OMCR servers every 3 months Every 3 months
3 OMCR part
4 MFS Part
Ok Nok Not Check
Ok Nok Not CheckOk Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
8/13/2019 ALU Preventive Maintenance
http://slidepdf.com/reader/full/alu-preventive-maintenance 4/14
1Check both servers' local disk free capacity,especially
/var,/usr ,/RESULT can not be more than 80%Weekly
2Check MFS version (validated version) and list of patches
to see if it is updatedMonthly
3 Check if they have hardware problem. Weekly
4Check MFS alarm (for example: GPU ,station ,FAN,
Transmission, Power, hub etc.), clear the alarmsWeekly
5Check standby GPU to see if it can be RESET and come
up successfully.Monthly
6Check STATION A,B to see if they can be switch over
successfullyMonthly
7 execute and check the AuditMFS.pl script output. Monthly
1 Check and clear all alarm in each module Daily
2Check and clear the transimission unstable issues, (Bit
error rate,AIS , Far End Alarm etc)Daily
3 Check and clear all antenna unstable issues (VSWR etc.) Daily
1
Hardware status check (open BSC BSSUSM window, in
HW EQUIPMENT VIEW, click BSS icon, right click,
click EXPAND ALL and extend all hardware status.
Check each of them and ensure the status are good)
Daily
2Function module status check (in BSSUSM window, HWEQUIPMENT VIEW select BSS,and in GSM
FUNCTIONAL VIEW window check all N7 status)
Daily
3MFS hardware status check (use IMT to check MFS
hardware status)Daily
4
BSC status check (in OMCR RNUSM winfdow check
BSC current status, cell status, in SOFTWARE
MANAGEMENT window check software status)
Daily
1MXBSC/MFS OMCP active/standby switchover (9135
MFS STATION active/standby switch)Monthly
2 MXBSC TP active/standby switch Monthly
1All onsite engineers must have OAM software( refer to
SOFTWARE LIST)Daily
7 BSC/MFS active/standby switch
9 software and tools
5 BTS Part
6 BSS hardware status check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
8/13/2019 ALU Preventive Maintenance
http://slidepdf.com/reader/full/alu-preventive-maintenance 5/14
2 All onsite engineers must have EICON card and driver Daily
3 All onsite engineers must have RS232 Cable Daily
4 All onsite engineers must have X25 Cable Daily
5 All onsite engineers must have BTS-Terminal Cable Daily
6All onsite engineers must have ethernet cable,for GPRS-
TerminalDaily
7 All onsite engineers must have Grounding cable Daily
8 Keep documentation for all version Daily
9Ensure all OAM terminal running well(including
PC,EICON card, X.25 cable, RS232 cable)Daily
10All OMC-R software disk for current release must be on
siteMonthly
11 Current version BSS software must be onsite Monthly
12All the MFS patches for current software version must be
on siteMonthly
1 Temperature , humidity and must follow requirment Monthly
2 the front and rear door must be closed when no activity Daily
3 All the O&A termianl must have good grounding Twice yearly
4Ensure BTS room is clean enough and temperature meet
requirementMonthly
5 Check if the BTS door is closed properly Daily
6All the module must have spare in hands, if not please
order ASAP
Weekly
10 Environment and spare check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
Ok Nok Not Check
8/13/2019 ALU Preventive Maintenance
http://slidepdf.com/reader/full/alu-preventive-maintenance 6/14
Date of last check
8/13/2019 ALU Preventive Maintenance
http://slidepdf.com/reader/full/alu-preventive-maintenance 7/14
8/13/2019 ALU Preventive Maintenance
http://slidepdf.com/reader/full/alu-preventive-maintenance 8/14
8/13/2019 ALU Preventive Maintenance
http://slidepdf.com/reader/full/alu-preventive-maintenance 9/14
8/13/2019 ALU Preventive Maintenance
http://slidepdf.com/reader/full/alu-preventive-maintenance 10/14
Remark
command: hw_inquiry.sh > /tmp/hw_inquiry.log
check log file /tmp/hw_inquiry.log
MFS: 9+1 or 21+1
BSSUSM -> Configuration -> Software Management -> BSC Database -> Check the last day BSC backup
Nếu BSC không có backup kiểm tra lại đã Enable Automatic DLS Backup trong PreferencesGernerate full package all BSC:
B12: BSSUSM -> Configuration -> Software Management -> BSC Database -> choose the last backup --> Generate complete BSS software package
BSC: BSSUSM -> Configuration -> Webmin Application -> user/pass: mxadmin -> Patch Operation -> Patch Audit
MFS: check f ile /omcxchg/data/patch/patch_status.log in MFS
OMC: follow patch delivery note
MIB Backup: IMT -> Backup/Restore -> Data Backup --> Backup
System Backup: IMT -> Backup/Restore -> System Backup
follow section 3 Alcatel-Lucent 9153 Operation & Maintenance Center Radio - Network Administration Handbook
Chú ý kiểm tra service NTP sau khi back up trên tất cả server (master + agents): svcs -a ntp
current alarm: /alcatel/var/share/AFTR/SOCAD/cal.csv
history alarm: backup frome ASUSM in OMCR
check there no alarm relate CLOCK and NTP
Kiểm tra đồng bộ thời gian của tất cả các card của BSCRun below script on all cards in BSC:
#ntpq -p
/usr/local/bin/mx_chkSanity
/usr/local/bin/mx_shelfAudit
8/13/2019 ALU Preventive Maintenance
http://slidepdf.com/reader/full/alu-preventive-maintenance 11/14
check log from hw_inquiry.sh
command: df -h -> no folder with capacity over 90%
Check on NPO
BSSUSM -> Configuration -> Software Management -> BSC Database -> Check the last day BSC backup
Nếu BSC không có backup kiểm tra lại đã Enable Automatic DLS Backup trong PreferencesGernerate full package all BSC:
B12: BSSUSM -> Configuration -> Software Management -> BSC Database -> choose the last backup --> Generate complete BSS software package
BSSUSM --> click on BSC --> choose Discovery
RNUSM -> General --> Query Adjacencies Inconsistencies
RNUSM -> General --> Correct Adjacencies Inconsistencies
check output from /alcatel/omc3/migration/script/OMC_checks.pl -y
Icon Box -> Administration Facilities -> USM Shutdown -> Apply
Perform at midnight, there no action on OMCR.Run script: /alcatel/omc3/migration/script/cleanUp.pl
RNUSM -> Configuration -> Delete PRC -> Choose PRCs to delete
Preocedure:
1. Stop omc3 on Master:
User: root
# /alcatel/omc3/osm/script/MF-shutdown
2. Reboot Master Server:
# init 6
3. Reboot HMIs then Agents server:
# init 6
4. Make sure that all servers are come up then do MF-start on Master
On Master:
#uptime (must more than 10 minutes)
#/alcatel/omc3/osm/script/MF-start
5. Verify that all process/application become running after start (check in DSM)
8/13/2019 ALU Preventive Maintenance
http://slidepdf.com/reader/full/alu-preventive-maintenance 12/14
IMT -> View -> Physical View --> shelf3(4) -> Front View -> choose standby GPU -> Reset
Note: after reset, wait for 10 minutes and see out come
IMT -> Tools -> Switch over
Note: after switch over, wait for 10 minutes and see out come
command: /usr/mfs/bin/AuditMFS.pl
log: /usr/mfs/log/AuditMFS.log
8/13/2019 ALU Preventive Maintenance
http://slidepdf.com/reader/full/alu-preventive-maintenance 13/14
8/13/2019 ALU Preventive Maintenance
http://slidepdf.com/reader/full/alu-preventive-maintenance 14/14
ok