altimeter analog
TRANSCRIPT
-
8/7/2019 Altimeter analog
1/15
Analog Altimeter
Know Altitude at any time
-
8/7/2019 Altimeter analog
2/15
About the watch
Watch equipped with the traditionanalog time display with altimeter
features
-
8/7/2019 Altimeter analog
3/15
Crown Stem
PusherAMaximum Altitude
PusherCUnits PusherB
Minimum Altitude
-
8/7/2019 Altimeter analog
4/15
HourHand
Minute Hand
S.S. Hand
IndicatorHand
AltimeterHand
Altimeter
unit hand
Date
-
8/7/2019 Altimeter analog
5/15
LowerRetrograde
AltimeterU
nit Display
AltimeterScaleHundreds
UpperRetrograde
AltimeterScaleThousands
-
8/7/2019 Altimeter analog
6/15
Watch Features
Alnalog time display in
Hrs,Minutes & Sec.
Date at 3 O Clock
Indiglo by pushing C/S
Date Fast Indexing Customized Analog Altimeter
Display in meter or feet
-
8/7/2019 Altimeter analog
7/15
How to set time
Pull the crown out and set desired
time by rotating crown clockwise
or anticlockwise, make sure
correct setting in am & pm
-
8/7/2019 Altimeter analog
8/15
How to set Date
Mid Pull the crown and set
desired date by rotating crown
clockwise or anticlockwise
Note :- Date changes between
11:30pm 1:0am
Never do fast indexing between
9:00pm to 12:00 it could damaged
the date components
-
8/7/2019 Altimeter analog
9/15
How to set Indicator Hand
Pull crown out at 2nd Position
Check the position of Indicator
hand. It should be exactly at 12O
clock position.
Press pusherA or B to set
indicator hand at 12O clock.
Press & Hold Pusher A or B to
move Indicator Hand Fast
Push crown In when indicator
hand is set.
-
8/7/2019 Altimeter analog
10/15
How to calibrate Altimeter
Calibrate Altimeter before use
Keep Watch in Running mode by Pushing
crown IN
First select the unit of Altimeter (Meteror
Feet) by pressing pusherC , it is
displayed in the eye at 4Oclock.
Pull crown in middle position & wait forthe Indicator hands to stop moving at the
Current selected Altimeter unit
The Long Indicator Hand should point to
the current altitude
Press PusherA orB to move Indicator
Hand at the desired Calibrated Altitudepoint
Upper Altimeter Hand moves relative to
the altitude value displayed by the Long
Indicator Hand
Push Crown IN when done
-
8/7/2019 Altimeter analog
11/15
How to calibrate Altimeter
To change from Off or meters to feet or
feet to meters or Off , Press pusher C
Note->If Pusher is not released within one
second, changes made in calibration arediscarded and current altitude is displayed
-
8/7/2019 Altimeter analog
12/15
How to Use Altimeter (On/Off)
Push crown In to keep Watch inrunning mode
Press pusher -C to select the unitof Altimeter.ie. Meter or Feet or tokeep altimeter in off mode
Long Indicator hand displays theAltitude on scale given on the top
ring for smaller unit inHundreds(0-1000)
Read the hand given at 10clockfor the bigger unit (more than1000)
The altimeter works on the basisof atmospheric pressure.
Ensure the calibration of Indicatorhand prior to use.
Note :-The Watch Automaticallyturn the Altimeteroff after60minutes from activation
-
8/7/2019 Altimeter analog
13/15
How to read Altimeter
Example
3350 MeterExample
3550 Feet
3000
350Meter
3000
Feet550
-
8/7/2019 Altimeter analog
14/15
How to see max & mini Altitude
Push crown In to keep Watch in
running mode
Press pusher -A to see Maximum
Altitude
Press pusher -B to see Minimumaltitude
Note ->The Maximum or Minimum
Altitude is displayed for ten
Seconds ,to extend the displayduration for another 10 sec, Press
pusher A or B before the previous
ten sec. expires
-
8/7/2019 Altimeter analog
15/15
Styles available