all ansi standards list

NEMAANSIIEC

NTCIPANSLGHIMSS

Type of code Standard code

ANSI ANSI C119.1-2011

ANSIANSI C119.4-2011











ANSI ANSI C12.4-1984 (R2002, R2011)

ANSI ANSI C12.5-1978 (R2002, R2012)

ANSI ANSI C12.6-1987 (R2002, R2012)


ANSI ANSI C12.8-1981 (R2002, R2012)





ANSI ANSI C136.12-2004 (R2009)

ANSI ANSI C136.13-2004 (R2009)

ANSIANSI C136.14-2004 (R2009)



ANSIANSI C136.17-2005(R2010)

ANSIANSI C136.18-2006(R2010)



ANSI ANSI C136.21-2004 (R2009)

ANSI ANSI C136.2-2004 (R2009)

ANSI ANSI C136.22-2004 (R2009)


ANSI ANSI C136.24-2004 (R2010)




ANSI ANSI C136.28-2006 (R2011)



ANSI ANSI C136.3-2005 (R2009)



ANSI ANSI C136.34-2004 (R2009)


ANSI ANSI C136.36A-2010

ANSI ANSI C136.36B-2008

ANSI ANSI C136.36C-2010




ANSI ANSI C136.4-2003 (R2009)

ANSI ANSI C136.5-2003 (R2009)

ANSI ANSI C136.6-2004 (R2012)

ANSI ANSI C136.9-2003 (R2012)

ANSI ANSI C18.1M, Part 1-2009








ANSI ANSI C29.3-1986 (R2002, R2012)


ANSI ANSI C37.51-2003 (R2010)

ANSIANSI C37.51a-2010

ANSI ANSI C37.52-1974 (R1995, R2000)

ANSIANSI C37.54-2002 (R2010)

ANSI ANSI C37.55-2002 (R2010)

ANSI ANSI C37.57-2003 (R2010)

ANSI ANSI C37.58-2003 (R2010)

ANSI ANSI C37.85-2002 (R2010)


ANSI ANSI C78.1340-1990 (R1995)

ANSI ANSI C78.1341-1990 (R1995)

ANSI ANSI C78.1342-1990 (R1995)

ANSI ANSI C78.1372-1997

ANSI ANSI C78.1374-1996

ANSI ANSI C78.1375-1996

ANSI ANSI C78.1376-1996

ANSI ANSI C78.1377-1996

ANSI ANSI C78.1378-1997

ANSI ANSI C78.1379-1997

ANSI ANSI C78.1380-1988

ANSI ANSI C78.1381-1998

ANSI ANSI C78.1382-1996

ANSI ANSI C78.1384-1997

ANSI ANSI C78.1401-2004

ANSI ANSI C78.1402-2004

ANSI ANSI C78.1403-1997

ANSI ANSI C78.1404-1991 (R1995)

ANSI ANSI C78.1406-2004

ANSI ANSI C78.1407-2004

ANSI ANSI C78.1408-2004

ANSI ANSI C78.1409-1991 (R1995)

ANSI ANSI C78.1410-1991 (R1995)

ANSI ANSI C78.1411-1991 (R1995)

ANSI ANSI C78.1412-1991 (R1995)


ANSI ANSI C78.1414-1988 (R1994)

ANSI ANSI C78.1415-1989 (R1994)

ANSI ANSI C78.1417-1997

ANSI ANSI C78.1418-1991 (R1995)

ANSI ANSI C78.1419-1991 (R1995)


ANSI ANSI C78.1421-2002



ANSI ANSI C78.1432-1997


ANSI ANSI C78.1434-2001

ANSI ANSI C78.1435-2002

ANSI ANSI C78.1450-1983 (R2002)

ANSI ANSI C78.1451-2002

ANSI ANSI C78.1452-2004


ANSI ANSI C78.1500-2001

ANSI ANSI C78.1501-2001

ANSI ANSI C78.1503-2001

ANSI ANSI C78.1504-2001

ANSI ANSI C78.1505-2001



ANSI_ANSLG ANSI/ANSLG C78.42-2009

ANSI ANSI C78.22-1995 (R2003)

ANSI ANSI C78.23-1995 (R2003)



ANSI ANSI C78.261-1977 (R2007)


ANSI ANSI C78.370.390-2002

ANSI ANSI C78.370-1997 (R2003)




ANSI ANSI C78.386-1989 (R1994)

ANSI ANSI C78.389-2004 (R2009)


















ANSI ANSI Z535.1-2006 (R2011)

ANSI ANSI Z535.2-2011





ANSI ANSI Z535-2011

ANSI/IEC ANSI/IEC 60529-2004

ANSI/IEC ANSI/IEC 60974-11-2009








ANSI/IEC ANSI/IEC 62430-2010

ANSI/IEC ANSI/IEC C78.682-1997 (R2010)

ANSI/IEC ANSI/IEC C78.901-2005

ANSI/IEC ANSI/IEC C81.64-2005

ANSI/NEMA ANSI/NEMA AB 3-2013

ANSI/NEMAANSI/NEMA AB 4-2009

ANSI/NEMA ANSI/NEMA C29.10-1989 (R2002, R2012)

ANSI/NEMA ANSI/NEMA C29.11-2012












ANSI/NEMA ANSI/NEMA C78.LL 1256-2003




ANSI/NEMA ANSI/NEMA CC 1-2009

ANSI/NEMA ANSI/NEMA FB 11-2000

ANSI/NEMA ANSI/NEMA FB 1-2012

ANSI/NEMA ANSI/NEMA FI 1-2004

ANSI/NEMA ANSI/NEMA FI 3-2004

ANSI/NEMA ANSI/NEMA FL 1-2009

ANSI/NEMA ANSI/NEMA GR 1-2007

ANSI/NEMAANSI/NEMA HP 3-2012



ANSI/NEMA ANSI/NEMA ICS 8-2011

ANSI/NEMA ANSI/NEMA KS 2-2013

ANSI/NEMA ANSI/NEMA LD 3-2005

ANSI/NEMA ANSI/NEMA MG 1-2011

ANSI/NEMA ANSI/NEMA MW 1000-2012

ANSI/NEMA ANSI/NEMA OS 1-2008 (R2010)

ANSI/NEMA ANSI/NEMA OS 2-2008 (R2010)

ANSI/NEMA ANSI/NEMA PB 1.1-2007

ANSI/NEMAANSI/NEMA PB 2.1-2007

ANSI/NEMA ANSI/NEMA SB 40-2010

ANSI/NEMA ANSI/NEMA SG-IC 1-2013

ANSI/NEMA ANSI/NEMA WC 27500-2012

ANSI/NEMA ANSI/NEMA WC 51-2009/ICEA P-54-440

ANSI/NEMA ANSI/NEMA WC 53-2008/ICEA T-27-581

ANSI/NEMA ANSI/NEMA WC 54/ICEA T-26-465-2013

ANSI/NEMA ANSI/NEMA WC 57-2004/ICEA S-73-532


ANSI/NEMA ANSI/NEMA WC 63.2-1996 (R2003)



ANSI/NEMAANSI/NEMA WC 70-2009/ICEA S-95-658-2009

ANSI/NEMAANSI/NEMA WC 71-1999/ICEA S-96-659-1999

ANSI/NEMA ANSI/NEMA WC 74/ICEA S-93-639-2012

ANSI/NEMA ANSI/NEMA WD 6-2002 (R2008)

ANSI_ANSLG ANSI_ANSLG C78.21-2011









ANSI_ANSLGANSI_ANSLG C78.60432:1-2007

ANSI_ANSLG ANSI_ANSLG C78.60432:2-2007

ANSI_ANSLG ANSI_ANSLG C78.60432:3-2007








HIMSS/NEMA HIMSS/NEMA HN 1-2008

NEMA NEMA 107-1987 (R1993)

NEMA NEMA 250-2008

NEMA NEMA 260-1996 (2004)

NEMA NEMA 410-2011

NEMA NEMA 5RN 2189-2003

NEMA NEMA AB 1

NEMA NEMA AB 5-2011

NEMA NEMA ABP 1-2010

NEMA NEMA ABP 2-2011

NEMA NEMA BL 1-1997 (R2002)

NEMA NEMA BL 2-2009

NEMA NEMA BU 1

NEMANEMA BU 1.1-2005 (Spanish)

NEMA NEMA BU 1.1-2010

NEMA NEMA BU 1.2-2002 (R2008)

NEMA NEMA C12.24 TR-2011

NEMA NEMA CB 1-2000 (R2012)

NEMA NEMA CG 1-2001

NEMA NEMA CG 2-2004

NEMA NEMA CG 3.2-1998

NEMA NEMA CP 1-2000 (R2008)

NEMA NEMA DC 10-2009

NEMA

NEMANEMA NEMA DC 20-1992 (R2003, R2009)

NEMA NEMA DC 2-1982 (R1988)

NEMA NEMA DC 3, Annex A-2010

NEMA NEMA DC 3-2008

NEMA NEMA DC 5-1989 (R1996, R2002, R2008)

NEMA NEMA EI 21.1-1993 (R2002)

NEMA NEMA EI 21.2-1991 (R1997, R2002)

NEMA NEMA EM 1-2010

NEMA NEMA EW 1-1988 (R1994, R1999, R2004)

NEMA NEMA EW 3-1983 (R1995, R1999, R2002)

NEMA NEMA EW 4-2009

NEMA NEMA EW 6-2006

NEMA NEMA EW 9-2012

NEMA DC 12-1985 (R1991, R1996, R2002, R2008)

NEMA DC 13-1979 (R1985, R1991, R1997, R2002, R2008)

NEMANEMA FB 2.10-2012

NEMA NEMA FB 2.20-2012

NEMA NEMA FG 1-1993

NEMA NEMA FI 2-1992 (R1999, R2004)

NEMA NEMA FU 1-2002 (R2007)

NEMA

NEMANEMA HP 5-2009

NEMANEMA HP 6-2007

NEMANEMA HP 7-2011

NEMA NEMA HV 2-1991 (R1996, R2002, R2012)

NEMA NEMA IA 2.1-2005







NEMANEMA NEMA ICS 1.3-1986 (R2001, R2009)

NEMA NEMA ICS 10-2005, Part 1



NEMA NEMA ICS 12.1-1997

NEMA NEMA ICS 1-2000 (R2005, R2008)

NEMA NEMA ICS 14-2010

NEMANEMA ICS 15.1-2012

NEMANEMA ICS 15-2011


NEMA NEMA ICS 18-2001 (R2007)


NEMA NEMA ICS 2.3-1995 (R2002, R2008)

NEMA NEMA ICS 2.4-2003 (R2012)


NEMANEMA ICS 2-1996, Part 8 (R2004, R2009)


NEMA NEMA ICS 2-2002, Part 9 (R2007, R2013)

NEMANEMA ICS 3.1-2009


NEMA HP 100-1991 (R1999, R2005, R2010) Series (HP 100-100.4)

NEMA ICS 1.1-1984 (R1988, R1993, R1998, R2003, R2009)


NEMA NEMA ICS 5, Annex B-2002 (R2008)

NEMA NEMA ICS 5, Annex E-2002 (R2008)

NEMA NEMA ICS 5, Annex F-2002 (R2007, R2012)

NEMA NEMA ICS 5-2000 (R2005, R2010)

NEMANEMA ICS 61800-1-2002 (R2007)

NEMANEMA ICS 61800-2-2005

NEMANEMA ICS 61800-4-2004

NEMA NEMA ICS 6-1993 (R2001, R2006)

NEMA NEMA ICS 7.1-2006


NEMA NEMA IIC 1 v02

NEMA NEMA KS 1-2001 (R2006)

NEMA NEMA KS 3-2010

NEMA NEMA LA 1-2009

NEMA NEMA LC 1-2007

NEMA NEMA LD 3.1-1995

NEMA NEMA LE 4-2012

NEMA NEMA LE 5-2001

NEMA NEMA LE 5A-1999

NEMA NEMA LE 5B-1998

NEMA NEMA LE 6-2009

NEMA NEMA LI 1-2011

NEMA NEMA LI 6-1993 (R1999, R2005)

NEMA NEMA LL 1-1997

NEMA NEMA LL 2-1997 (R2002)

NEMA NEMA LL 3-1999

NEMA NEMA LL 4-1999

NEMA NEMA LL 5-1999

NEMA NEMA LL 6-1999

NEMA NEMA LL 7-2006

NEMA NEMA LL 8-2010

NEMA NEMA LL 9-2011

NEMA NEMA LS 1-1992 (R2000)

NEMA NEMA LSD 10-2000


NEMA NEMA LSD 1-2003 (R2011)











NEMANEMA LSD 25-2008



NEMA NEMA LSD 2A-2007

NEMA NEMA LSD 2B-1999





















NEMANEMA LSD 56-2011





NEMA NEMA LSD 62

NEMA NEMA LSD 63







NEMA NEMA LSD E11-2001

NEMA NEMA MG 10-2001 (R2007)

NEMANEMA NEMA MG 1-2007 Condensed

NEMA NEMA MG 2-2001 Revision 1-2007

NEMA NEMA MG 3-1974 (R1995, R2000, R2006)

NEMA NEMA MGW 1-2013

NEMA NEMA MS 10-2010


NEMA NEMA MS 1-2008


NEMA NEMA MS 2-2008

NEMA NEMA MS 3-2008

NEMA NEMA MS 4-2010

NEMA NEMA MS 5-2009

NEMANEMA MS 6-2008

NEMA NEMA MS 7-1993 (Revision 1998)

NEMA NEMA MS 8-2008

NEMA NEMA MS 9-2008

NEMA NEMA MW 700-1997




NEMA NEMA MW 765-2003 (R2008)

NEMA NEMA MW 770-1997 (R1998)

NEMA NEMA MW 780-2005 (R2011)

NEMA NEMA MW 785-2000 (R2006, R2011)



NEMA NEMA NS 1-2005

NEMA NEMA NU 1-2007

NEMA NEMA NU 2-2012

NEMA NEMA NU 3-2004

NEMA NEMA NU 4-2008

NEMA NEMA OS 3-2012

NEMA NEMA PB 1.1-2002 (Spanish)

NEMA NEMA PB 1-2011

NEMANEMA PB 2.1-2002

NEMA NEMA PB 2.2-1999 (R2004, R2009)

NEMA NEMA PB 2-2011

NEMA NEMA PE 1-2003

NEMA NEMA PE 5-1997 (R2003)

NEMA NEMA PE 7-1997 (R2003)

NEMA NEMA PRP 2-2009


NEMA MG 11-1977 (R1997, R2001, R2007, R2012)


NEMA NEMA RE 2-1999

NEMA NEMA RN 1-2005

NEMANEMA RN 2-1997 (R2009)

NEMANEMA RN 3-1991 (R2002)

NEMA NEMA RV 1-2012

NEMANEMA RV 2-2011

NEMA NEMA RV 3-2012

NEMA NEMA RV 4-2009

NEMA NEMA SB 10-1991 (R1998, R2005, R2010)

NEMA NEMA SB 11-2011

NEMA NEMA SB 1-2001


NEMA NEMA SB 19-(R2007)

NEMA NEMA SB 2-2010

NEMA NEMA SB 28-1992 (R1997, R2003)



NEMA NEMA SB 3-1969 (R1989, R1994)


NEMA NEMA SB 7-2011

NEMA NEMA SBP 1-2010

NEMANEMA SG 10-2008

NEMA NEMA SG 11-2008

NEMA NEMA SG 4-2009 (R2013)

NEMA NEMA SG 5-1995

NEMA NEMA SG 6-2000

NEMA NEMA SG-AMI 1-2009

NEMA NEMA SM 23-1991 (R1997, R2002)

NEMA NEMA SM 24-1991 (R1997, R2002)

NEMA NEMA SSL 1-2010




NEMA NEMA SSL 7A-2013

NEMA NEMA ST 20-1992 (R1997)

NEMA NEMA TC 13-2005



NEMA NEMA TC 19-2001 (R2009)

NEMA NEMA TC 2-2003

NEMA NEMA TC 3-2004

NEMA NEMA TC 6 & 8-2003

NEMA NEMA TC 7-2013

NEMA NEMA TC 9-2004

NEMA NEMA TCB 2-2000

NEMA NEMA TCB 3-2001 (R2009)

NEMA NEMA TF 1-1993 (R2000, R2005)

NEMA NEMA TF 2-1993 (R2000, R2005)

NEMA NEMA TP 1-2002

NEMA NEMA TP 2-2005

NEMA NEMA TP 3-2000

NEMA NEMA TR 1-1993 (R2000)

NEMA NEMA TS 1-1989 (R1994, R2000, R2005)

NEMA NEMA TS 2-2003 (R2008)

NEMA NEMA TS 2-2003, Amendment 3

NEMA NEMA TS 2-2003, Amendment 4

NEMA NEMA TS 4-2010

NEMA NEMA UC 2-1993 (R2000, R2005, R2010)

NEMA NEMA UD 2-2004 (R2009)

NEMANEMA UD 3-2004 (R2009)

NEMA NEMA VE 1-2009

NEMA NEMA VE 2-2006

NEMA NEMA WC 26/EEMAC 201-2008

NEMANEMA NEMA WC 52-2005

NEMANEMA NEMA WC 58-2008/ICEA S-75-381

NEMA NEMA WC 60.2-1994 (R1999)

NEMA NEMA WC 62-1992 (R1999, R2004)

NEMA NEMA WC 63.1-2005

NEMANEMA WC 65-1995 (R2003)

NEMA NEMA WC 72-1999 (R2004)

NEMA NEMA WC 73-2000 (R2005, R2012)

NEMA NEMA WD 1-1999 (R2005, R2010)

NEMA NEMA WD 7-2011

NEMA NEMA WD 9-2013

NEMA NEMA XR 10-1986 (R1992, R1998, R2003)

NEMA NEMA XR 11-1993 (R1999)

NEMA NEMA XR 13-1990 (R1995, R2000)

NEMA NEMA XR 14-1990 (R1995, R2000)

NEMA NEMA XR 15-1991 (R1996, R2001)

NEMANEMA XR 16-1991 (R1996, R2001)

NEMA NEMA XR 17-1993 (R1999)

NEMA WC 50-1976/ICEA P-53-426 Second Edition (R1993, R1999)

NEMA WC 56-1986 (R1993, R2000, R2005, R2012)

NEMA NEMA XR 18-1993 (R1999)

NEMA NEMA XR 19-1993 (R1999)

NEMA NEMA XR 21-2000

NEMANEMA XR 22-2006

NEMANEMA XR 23-2006






NEMA NEMA XR 5-1992 (R1999)

NEMA NEMA XR 7-1995 (R2000)

NEMA NEMA XR 9-1984 (R1994, R2000)

NTCIP NTCIP 1101:1996


NTCIP NTCIP 1103 v02







































NEMA NEMA PP 1-1986 (R1996)

NEMA NEMA PS 3.13-2001

NEMA PS 3.9-2000

NEMA NEMA ST 1-1988 (R1994, R1997)



NEMA NEMA WC 60.1-1995

NEMA NEMA WC 7-1988

NEMA NEMA WC 8-1988

NEMA WC 2-1980 (R1991, R1998)/ICEA S-67-401 5th Edition

NEMA WC 4-1988/ICEA S-65-375 3rd Ed. (R1993)

National Electrical Manufacturers AssociationAmerican National Standards InstituteInternational Electrotechnical CommissionNational Transportation Communications for Intelligent Transportation Systems (ITS) ProtocolAmerican National Standard Lighting GroupHealthcare Information and Management Systems Society

TitleElectric connectors-Sealed insulated underground connector systems rated 600V

Electric connectors-Non-sealed, multiport connector systems rated 600V or less for Al and Cu conductorsPhysical aspects of watt-hour meters-Safety StandardInstrument Transformers for revenue metering, 10kV BIL through 350kV BIL (0.6kV NSV through 69kV NSV)Electric Meters-Code of Electricity MeteringProtocol Specification for ANSI Type 2 Optical PortUtility Industry end device data tablesElectricity Meters-0.2 & 0.5 Accuracy ClassesProtocol Specification for Telephone Modem CommunicationProtocol Specification for Interfacing of data Communication networksRegisters, Mechanical DemandThermal demand metersPhase-Shifting devices used in metering, marking and arrangement of Terminals Requirements for watt-hour socketsTest blocks and cabinets for installation of self-contained A-base watt-hour metersTest switches for transformer-Rated Meters

Roadway and area lighting equipment-Multiple SocketsRoadway and area lighting equipment-Filament Lamps-A guide for selectionRoadway and area lighting equipment-Mercury Lamps-A guide for selectionRoadway and area lighting equipment-Metal Brackets for wood poles

Roadway and area lighting equipment-Luminaire field identificationRoadway and area lighting equipment-Enclosed, post top-mounted Luminaires

Roadway and area lighting equipment-High-Mast Side-Mounted Luminaires for Horizontal- or Vertical-Burning High-Intensity Discharge Lamps

Roadway and area lighting equipment-High-Pressure Sodium (HPS) and Retrofit HPS Lamps for Mercury Ballasts-Guide for SelectionRoadway and area lighting equipment-Fiber-Reinforced Composite (FRC) Lighting Poles

Electric connectors-connector for use B/N AL-to-AL and Al-to-Cu conductors designed for normal operation at or below 930C and Cu-to-Cu

Electric connectors-Insulation-piercing connector system, rated 600V or Less (Low voltage aerial bundled cables and insulated and non insulated line wires

Roadway and area lighting equipment-Locking type photocontrol devices and mating receptacles-Physical and Electrical interchangeability and testing

Roadway and area lighting equipment-Elliptically shaped, enclosed side mounted luminaires for horizontal burning High Intensity Discharge (HID) Lamps

Roadway and area lighting equipment-Enclosed side-mounted Luminaires for horizontal burning high intensity discharge lamps-Mechanical interchangeability of refractors

Roadway and area lighting equipment-Vertical Tenons Used with Post Top-Mounted LuminairesRoadway and area lighting equipment-Luminaire Voltage ClassificationRoadway and area lighting equipment-Internal Labeling of LuminairesRoadway and area lighting equipment-Enclosed Architectural LuminairesRoadway and area lighting equipment-Non-Locking (Button)-Type PhotocontrolsRoadway and area lighting equipment-Ingress Protection (Resistance to Dust, Solid Objects and Moisture) for Luminaire EnclosuresRoadway and area lighting equipment-Troubleshooting Guide for High-Intensity Discharge (HID) LuminairesRoadway and area lighting equipment-Tunnel Lighting and Underpass LuminairesRoadway and area lighting equipment-Glass Lenses Used in LuminairesRoadway and area lighting equipment-Metal Halide Lamps-Guide for SelectionRoadway and area lighting equipment-Luminaire VibrationRoadway and area lighting equipment-Luminaire Attachments

Roadway and area lighting equipment-Enclosed Setback Luminaires and Directional Floodlights for High-Intensity Discharge (HID) Lamps

Roadway and area lighting equipment-Plug-In Type Receptacle and Plug for High-Intensity Discharge (HID) IgnitorsRoadway and area lighting equipment-Vandal Shields for Roadway and Area Lighting LuminairesRoadway and area lighting equipment-Luminaire Electrical Ancillary Devices (LEAD)Roadway and area lighting equipment-Aluminum Lighting PolesRoadway and area lighting equipment-Concrete Lighting PolesRoadway and area lighting equipment-Steel Roadway and Area Lighting PolesSolid State Light Sources Used in Roadway and Area LightingRoadway and area lighting equipment-Induction LightingRoadway and area lighting equipment-Solar Lighting SystemsRoadway and area lighting equipment-Series Sockets and Series-Socket ReceptaclesRoadway and area lighting equipment-Film CutoutsRoadway and area lighting equipment-Metal Heads and Reflector Assemblies-Mechanical and Optical InterchangeabilityRoadway and area lighting equipment-Socket Support Assemblies for Metal Heads-Mechanical InterchangeabilityPortable Primary Cells and Batteries with Aqueous Electrolyte-General and SpecificationsPortable Primary Cells and Batteries with Aqueous Electrolyte-Safety StandardPortable Rechargeable Cells and Batteries-General and SpecificationsPortable Rechargeable Cells and Batteries-Safety StandardPortable Lithium Primary Cells and Batteries-General and SpecificationsPortable Lithium Primary Cells and Batteries-Safety Standard

Test Procedures for Low-Voltage AC Power Circuit Protectors Used in Enclosures

Insulators-Composite-Line Post TypeInsulators-Composite-Distribution Line Post TypeWet-Process Porcelain Insulators Spool TypeSwitchgear-Low Voltage AC Power Circuit Breakers Used in Enclosures-Test ProceduresSwitchgear-Metal-Enclosed Low Voltage AC Power Circuit Breaker Switchgear Assemblies-Conformance Test Procedures

Switchgear-Metal-Enclosed Low Voltage AC Power Circuit Breaker Switchgear Assemblies-Conformance Test Procedures-Amendment 1: Short-Time Withstand Current Tests

Indoor AC High Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear-Conformance Test Procedures

Switchgear-Medium Voltage Metal-Clad Assemblies-Conformance Test ProceduresSwitchgear-Metal-Enclosed Interrupter Switchgear Assemblies-Conformance TestingSwitchgear-Indoor AC Medium Voltage Switches for Use in Metal-Enclosed Switchgear-Conformance Test Procedures

Gas Tube Surge Arresters on Wire Line Telephone Circuits450W Self-Ballasted Mercury Lamps750-Watt, 120-Volt Self-Ballasted Mercury Lamps160-Watt, 120-Volt B87 Self-Ballasted Mercury Halide Lamps70-Watt, M98 Single-Ended Metal Halide Lamps50-Watt, M110 Single-Ended Metal-Halide Lamps400-Watt, M59 Single-Ended Metal Halide Lamps1000-Watt, M47 Single-Ended Metal Halide Lamps175-Watt, M57 Single-Ended Metal Halide Lamps250-Watt, M58 Single-Ended Metal Halide Lamps1500-Watt, M48 Single-Ended Metal-Halide LampsElectric Lamps-250 Watt, 120 Volt, Self-Ballasted Mercury Lamps SpecificationsAmerican National Standard for Electric Lamps-70 W, M85 Double-Ended Metal Halide Lamps100-Watt, M90 Single-Ended Metal Halide Lamps150-Watt, M102 Single-Ended Metal-Halide LampsElectric Lamps-Dimensions for Projection Lamps-Double-Contact, Medium-Ring, Base-Up TypeElectric Lamps-Four-Pin, Prefocus, Base-Down TypeLamps-Tungsten Halogen (TH) Lamps with G6.35, GX6.35 and GY6.35 BasesDNF Projection LampsElectric Lamps-P28 Single-Contact Medium Prefocus-Based Projection Lamps for Base-Down Operation-DimensionsElectric Lamps-Condenser-Reflector, Four-Pin Prefocus-Base Projection Lamps-DimensionsElectric Lamps-CBA Projection LampEJL Projection LampELB Projection LampELC Projection LampEMM Projection Lamp

DDM Projection LampDED Projection Lamp1.65 in. (42 mm) Integral Reflector, Rim Reference Projection Lamps with GX5.3 or GY5.3 Bases-Dimensions and Centering SystemsEYB Projection LampEML Projection Lamp

Microfilm Projection Lamps-2 in. (51 mm) Dichroic Coated Integral Reflector, Rim Reference Tungsten Halogen Lamps with GX5.3 Bases

Dimensions and Centering Systems for Projection Lamps-35 mm Integral Reflector, Rim Reference Lamps with GZ4 Bases

Slide Projector Lamps-Condensing, Dichroic, 1.65 in. (42 mm), Integral Reflector, Rim Reference Tungsten Halogen Lamps with GX5.3 Bases

Tungsten Halogen (TH) Lamps with GZ9.5 Two-Pin, Prefocus Bases and 36.5 mm Nominal Light Center Length

2 in. (51 mm) Dichroic Coated Integral Reflector, Rim Reference Tungsten Halogen (TH) Large-Screen Projection Lamps with GX5.3 Bases

Condensing Dichroic Coated Integral Reflector Side-Pin Tungsten Halogen (TH) Projection Lamps with GX7.9 BasesProjection Lamps-Tungsten Halogen Lamps with G5.3 BasesProjection Lamps, Incandescent-Method for Life Testing

AC High Voltage Power Vacuum Interrupters-Safety Requirements for X-Radiation Limits

Dimensions and Centering Systems for Projection Lamps-51 mm (2 in.) Integral Reflector, Rim Reference Lamps with GX5.3, GY5.3 and GU5.3 Bases

Electric Lamps-Slide Projector Lamps, Condensing, Dichroic, 2 in. (51 mm), Integral Reflector, Rim Reference Tungsten Halogen Lamps with GY5.3 Bases

Electric Lamps-Use of Protective Shields with Tungsten Halogen (TH) Lamps-Cautionary NoticeElectric Lamps-Projection Lamps-Vocabulary

Tungsten Halogen (TH) Lamps with a Light Center Length (LCL) of 89 mm (3½ in.)Tungsten Halogen (TH) Lamps with a Light Center Length (LCL) of 63.5 mm (2½ in.)Tungsten Halogen (TH) Lamps with G9.5 Bases and 60.5 mm Light Center Length (LCL)Tungsten Halogen (TH) Lamps with P28 Bases and 55.5 mm Light Center Length (LCL)Tungsten Halogen (TH) Lamps with G38 Bases and 127 mm Light Center Length (LCL)Electric Lamps-Specifications for Fluorescent Lamp StartersElectric Lamps-A, G, PS and Similar Shapes with E26 Medium Screw BasesElectric Lamps-High-Pressure Sodium (HPS) LampsIncandescent Lamps-A, G, PS and Similar Shapes with E39 Mogul Screw BasesIncandescent Lamps-Miscellaneous Types2 in. (51 mm) Integral-Reflector Lamps with Front Covers and GU5.3 or GX5.3 BasesTubular Tungsten Halogen (TH) Lamps-Physical CharacteristicsSpecification for Tubular Incandescent Infrared LampsElectric Lamps-Procedure for Use in Preparation of Lamp Space DrawingsElectric Lamps-Amendments to ANSI C78.370-1997 and ANSI C78.390-1998Method of Designation for Electric Lamps-Photographic, Stage and StudioFluorescent Lamps-Guide for Electrical MeasurementsSpecifications for the Chromaticity of Fluorescent LampsElectric Lamps-Classification of the Beam Patterns of Reflector LampsMercury Lamps-Method of Measuring CharacteristicsElectric Lamps-High-Intensity Discharge (HID)-Methods of Measuring CharacteristicsElectric Lamps-Miniature and Sealed-Beam Incandescent Lamps-Method of DesignationElectric Lamps-Characteristics of Miniature Lamps of T1 and T1¾ Shapes Electric Lamps-Specifications for Performance of Self-Ballasted Compact Fluorescent LampsNomenclature for Glass Bulbs Intended for Use with Electric LampsElectric Rigid Steel Conduit (ERSC)Steel Electrical Metallic Tubing (EMT)Electrical Rigid Aluminum Conduit (ERAC)Intermediate Metal Conduit (EIMC)Lamp Ballasts-Line Frequency Fluorescent Lamp BallastsLamp Ballasts-Fluorescent AdaptersLamp Ballasts-Definitions-for Fluorescent Lamps and BallastsLamp Ballasts-Method of Measurement of Fluorescent Lamp BallastsReference Ballasts for Fluorescent LampsLamp Ballasts-Ballasts for High-Intensity Discharge and Low-Pressure Sodium (LPS) Lamps (Multiple-Supply Type)Lamp Ballasts-Ballasts for High-Intensity Discharge (HID) Lamps-Methods of MeasurementHarmonic Emission Limits-Related Power Quality Requirements for Lighting EquipmentElectric Power Systems and Equipment-Voltage Ratings (60 Hz)Safety ColorsEnvironmental and Facility Safety SignsStandard Criteria for Safety Symbols

Electric Lamps-Single-Ended Tungsten Halogen (TH) Lamps with GZ9.5 Base, T6 Bulb, 36.5 mm Light Center Length (LCL), 76.2 mm MOL with Proximity Reflector

Product Safety Signs and LabelsSafety Tags and Barricade Tapes (for Temporary Hazards)Product Safety Information in Product Manuals, Instructions and Other Collateral MaterialsColor ChartDegrees of Protection Provided by Enclosures (IP Code) (Identical National Adoption)Arc-Welding Equipment-Part 11: Electrode HoldersArc-Welding Equipment-Part 1: Welding Power SourcesArc-Welding Equipment-Part 12: Coupling Devices for Welding CablesArc-Welding Equipment-Part 2: Liquid Cooling SystemsArc-Welding Equipment-Part 3: Arc Striking and Stabilizing DevicesArc-Welding Equipment-Part 5: Wire FeedersArc-Welding Equipment-Part 7: TorchesArc-Welding Equipment-Part 8: Gas Consoles for Welding and Plasma Cutting SystemsEnvironmentally Conscious Design for Electrical and Electronic ProductsElectric Lamps-Standard Method of Measuring the Pinch Temperature of Quartz Tungsten-Halogen LampsElectric Lamps-Single-Based Fluorescent Lamps-Dimensional and Electrical CharacteristicsGuidelines and General Information for Electrical Lamp Bases, Lampholders and Gauges

Guidelines for Inspection and Preventive Maintenance of Molded-Case Circuit Breakers Used in Commercial and Industrial Applications

Wet-Process Porcelain Insulators-Indoor Apparatus Type

Insulators-Composite-Suspension TypeInsulators-Composite-Distribution Deadend TypeInsulators-Wet-Process Porcelain and Toughened Glass-Suspension TypeWet-Process Porcelain Insulators-Strain TypeWet-Process Porcelain Insulators-Low and Medium Voltage TypesWet-Process Porcelain Insulators-High Voltage Pin TypeWet-Process Porcelain Insulators-High Voltage Line-Post TypeWet-Process Porcelain Insulators-Apparatus, Cap and Pin TypeWet-Process Porcelain Insulators-Apparatus, Post TypePolyphase Induction Motors for Power Generation StationsProcedures for Fluorescent Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure (TCLP)Procedures for High-Intensity Discharge (HID) Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure (TCLP)Procedures for Incandescent Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure (TCLP)Requirements for Power-Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers (CCVTs)Electric Power Connectors for SubstationsPlugs, Receptacles and Connectors of the Pin-and-Sleeve Type for Hazardous LocationsFittings, Cast Metal Boxes and Conduit Bodies for Conduit, Electrical Metallic Tubing (EMT) and CableManufactured Electrical MicaCalendered Aramid Papers Used for Electrical InsulationFlashlight Basic Performance StandardGrounding Rod Electrodes and Grounding Rod Electrode Couplings

Electrical and Electronic Polytetrafluoroethylene (PTFE) Insulated High-Temperature Hook-Up Wire, Types ET (250 V), E (600 V) and EE (1,000 V)

Molded-Case Circuit Breakers and Their Application

Composite Insulators-Tests MethodsElectrical Power Insulators-Test Methods

Application Guide for Industrial Control and Systems Crane and Hoist ControllersDistribution Equipment Switch Application Guide, A User's ReferenceHigh-Pressure Decorative Laminates (HPDL)

Magnet WireSheet-Steel Outlet Boxes, Device Boxes, Covers and Box SupportsNonmetallic Outlet Boxes, Device Boxes, Covers and Box SupportsGeneral Instructions for Proper Installation, Operation and Maintenance of Panelboards Rated 600 V or Less

General Instructions for Proper Handling, Installation, Operation and Maintenance of Deadfront Distribution Switchboards Rated 600 V or Less

Communications Systems for Life Safety in SchoolsSmart Grid Interoperable & Conformant (SG-IC) Testing and Certification Scheme Operator GuidelinesStandard for Aerospace and Industrial Electrical CableAmpacities of Cables Installed in Cable TraysStandard Test Methods for Extruded Dielectric Power, Control, Instrumentation and Portable Cables for TestGuide for Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation and Portable Cables for TestStandard for Control, Thermocouple Extension and Instrumentation CablesTransfer Impedance TestingPerformance Standard for Coaxial Premise Data Communications CablesPerformance Standard for Category 6 and Category 7 100 Ohm Shielded and Unshielded Twisted Pair CablesStandard for Uninsulated Conductors Used in Electrical and Electronic Applications

Power Cables Rated 2,000 V or Less for the Distribution of Electrical Energy

Standard for Non-Shielded Cables Rated 2,001-5,000 V for Use in the Distribution of Electric Energy

5-46 kV Shielded Power Cable for Use in the Transmission and Distribution of Electric EnergyWiring Devices-Dimensional SpecificationsAmerican National Standard Electric Lamps: PAR and R ShapesFor Incandescent Lamps: Tungsten Halogen Lamps (Non-Vehicle)Electric Lamps-Specifications for the Chromaticity of Solid State Lighting (SSL) ProductsElectric Lamps-High-Intensity Discharge (HID)-Method of DesignationElectric Lamps: Specifications for Mercury LampsElectric Lamps-Guidelines for Low-Pressure Sodium (LPS) LampsElectric Lamps-Single-Ended Metal Halide LampsElectric Lamps-Double-Ended Metal Halide LampsElectric Lamps-Self-Ballasted Mercury Lamps

Electric Lamps-Incandescent Lamps-Safety Specifications, Part 1: Tungsten Filament Lamps for Domestic and Similar General Lighting Purposes

Electric Lamps-Safety Specifications, Part 2: Tungsten Halogen (TH) Lamps for Domestic and Similar General Lighting PurposesElectric Lamps-Incandescent Lamps-Safety Specifications, Part 3: Tungsten Halogen (TH) Lamps (Non-Vehicle)Electric Lamps-Double-Capped Fluorescent Lamps-Dimensional and Electrical CharacteristicsElectrical Lamp Bases-Specifications for Bases (Caps) for Electric LampsElectric Lampholders

Electrical and Electronic Fluorinated Ethylene Propylene (FEP) Insulated High-Temperature Hook-Up Wire, Types KT (250 V), K (600 V) and KK (1,000 V)

Electrical and Electronic Cross-Linked, Modified Low-Smoke Polyolefin (XLPO) Insulated Hook-Up Wire, Types LS (rated 105°C; 600 V), ZHDM (rated 90°C; 600 V), ZHDH (rated 90°C; 600 V), ZH (rated 125°C; 600 V), and ZHX (rated 125°C; 1000 V)

Motors and Generators

Gauges for Electric Lamp Bases and LampholdersLamp Ballasts-High Frequency Fluorescent Lamp BallastsLamp Ballasts-Low-Frequency Square Wave Electronic Ballasts-for Metal Halide LampsLamp Ballasts-High-Intensity Discharge (HID) and Low-Pressure Sodium (LPS) Lamps-DefinitionsManufacturer Disclosure Statement for Medical Device SecurityMethods of Measurement of Radio Influence Voltage (RIV) of High Voltage ApparatusEnclosures for Electrical Equipment (1,000 V Maximum)Safety Labels for Pad-Mounted Switchgear and Transformers Sited in Public AreasPerformance Testing for Lighting Controls and Switching Devices with Electronic Drivers and Discharge BallastsUser Guide to Product Specifications for Metal Electrical Conduit and TubingMolded-Case Circuit Breakers, Molded Case Switches, and Circuit-Breaker EnclosuresEstablishing Levels of Selective Coordination for Low Voltage Circuit BreakersSelective CoordinationRecommendations on AFCI / Home Electrical Product CompatibilityFluorescent Ballast ConnectorEnergy Efficiency for Electronic Ballasts for T8 Fluorescent LampsBusways

Instrucciones Generales para el Manejo, Instalacion, Operacion y Mantenimiento de Electroductos Hasta 600 V Nominales o Menos

General Instructions for Handling, Installation, Operation and Maintenance of Busway Rated 600 V or LessApplication Information for Busway Rated 600 V or LessNEMA Technical Report Definitions for Calculations of VA, VAh, VAR, and VARh for Poly-Phase Electricity MetersBrushes for Electrical MachinesManufactured Graphite/Carbon ElectrodesPowdered GraphiteTorquing Devices for Electrodes-Selection Through DisposalShunt CapacitorsResidential Controls-Temperature Limit Controls for Electric Baseboard Heaters

Residential Controls-Hot Water Immersion Controls

Residential Controls-Line Voltage Integrally Mounted Thermostats for Electric Heaters

Residential Controls-Class 2 TransformersQuick-Connect TerminalsEnergy-Efficiency Requirements for Programmable ThermostatsResidential Controls-Electrical Wall-Mounted Room ThermostatsResidential Controls-Surface-Type Controls for Electric Storage Water HeatersInstrument Transformers for Revenue Metering (110 kV BIL and Less)Instrument Transformers for Revenue Metering (125 kV BIL through 350 kV BIL)Exit Sign Visibility Testing Requirements for Safety and Energy EfficiencyElectric Arc-Welding Power SourcesSemi-Automatic Wire-Feed Systems for Arc WeldingGraphic Symbols for Arc-Welding and Cutting ApparatusGuidelines for Precautionary Labeling for Arc-Welding and Cutting ProductsArc Welding Power Sources–Energy Consumption Testing and Labeling

Selection and Installation Guidelines for Fittings for Use with Flexible Electrical Conduit and CableFiberglass Cable Tray SystemsUntreated Mica Paper Used for Electrical InsulationLow Voltage Cartridge Fuses

High-Temperature Instrumentation and Control Cables

Electrical and Electronic Crosslinked, Modified Polyethylene (XLPE) Insulated 125°C Hook-Up Wire, Types L (600 V), LL (1,000 V) and LX (3,000 V)

Application Guide for Ceramic Suspension InsulatorsProgrammable Controllers (PLC), Part 1: General InformationProgrammable Controllers (PLC), Part 2: Equipment Requirements and TestProgrammable Controllers (PLC), Part 3: Programming LanguagesProgrammable Controllers (PLC), Part 4: User GuidelinesProgrammable Controllers (PLC), Part 5: CommunicationsProgrammable Controllers (PLC), Part 7: Fuzzy Control ProgrammingProgrammable Controllers (PLC), Part 8: Guidelines for the Application and Implementation of Programming Languages

Safety Guidelines for the Application, Installation and Maintenance of Solid State Control

Preventive Maintenance of Industrial Control and Systems EquipmentPart 1: Electromechanical AC Transfer Switch EquipmentAC Transfer Equipment, Part 2: Static AC Transfer EquipmentSafety Bulletin: NEMA Safety Considerations for Residential Transfer Equipment and Residential Transfer SwitchesIndustrial Control and Systems: Profiles of Networked Industrial Devices-Part 1: General RulesIndustrial Control and Systems: General RequirementsApplication Guide for Electric Fire Pump Controllers

Instructions for the Handling, Installation, Operation and Maintenance of Electric Fire Pump Controllers Rated Not More Than 600 V

Motion/Position Control Motors, Controls and Feedback Devices

Diagrams, Device Designations and SymbolsInstructions for the Handling, Installation, Operation and Maintenance of Motor Control Centers Rated Not More Than 600 VNEMA and IEC Devices for Motor Service-A Guide for Understanding the Differences

Controllers, Contactors and Overload Relays Rated 600 VAC Vacuum-Break Magnetic Controllers Rated 1,500 V AC

Guide for the Application, Handling, Storage, Installation and Maintenance of Medium Voltage AC Contactors, Controllers and Control Centers

Medium Voltage Controllers Rated 2,001 to 7,200 V AC

Selection and Installation Guidelines for Fittings for Use with Non-Flexible Electrical Metal Conduit or Tubing (Rigid Metal Conduit, Intermediate Metal Conduit and Electrical Metallic Tubing)

Electrical and Electronic Silicone and Silicone-Braided Insulated Hook-Up Wire Types S (600 V), ZHS (600 V), SS (1,000 V), ZHSS (1,000 V) and SSB Braided (1,000 V)

Electrical and Electronic PVC, PVC/Nylon, and PE/Nylon 105ºC Hook-Up Wire, Types B, C, D, BN, CN, and DN (600, 1000, and 3000 V), and Types J and JN 75ºC (600V)

Instructions for the Handling, Installation, Operation, and Maintenance of Medium Voltage Electric Fire Pump Controllers Rated Not More Than 7200V

Motor Control Centers

Informational Guide to Electrical Industrial TopicsControllers, Contactors and Overload Relays Rated Not More Than 2,000 V AC or 750 V DC, Part 8: Disconnect Devices for Use in Industrial Control Equipment

Application Guideline for Terminal BlocksTypical Proximity Switch SpecificationsAdditional Requirements for Proximity Switches Suitable for Use in Strong Magnetic FieldsHigh-Pressure Power Wash Test Procedure for Self-Contained Control-Circuit DevicesControl Circuit and Pilot Devices

EnclosuresSafety Standards for Construction and Guide for Selection, Installation and Operation of Adjustable Speed Drive SystemsAdjustable Speed DrivesDigital Imaging and Communications in Security Information Object Definitions (IODs)Enclosed and Miscellaneous Distribution Equipment Switches (600 V Maximum)Guidelines for Inspection and Preventive Maintenance of Switches Used in Commercial and Industrial ApplicationsSurge ArrestersTest Procedure for Compatibility of Hearing Aids and Ultrasonic Lighting Control DevicesPerformance, Application, Fabrication, and Installation of High Pressure Decorative LaminatesRecessed Luminaires-Ceiling CompatibilityProcedure for Determining Luminaire Efficacy Ratings for Fluorescent LuminairesProcedure for Determining Luminaire Efficacy Ratings for Commercial, Non-Residential Downlight LuminairesProcedure for Determining Luminaire Efficacy Ratings for High-Intensity Discharge (HID) Industrial LuminairesProcedure for Determining Target Efficacy Ratings (TER) for Commercial, Industrial and Residential LuminairesIndustrial Laminated Thermosetting ProductsRelative Temperature Indices of Industrial Thermosetting LaminatesProcedures for Linear Fluorescent Lamp Sample Preparation and the TCLPProcedures for Pin-Based Compact Fluorescent Lamp Sample Preparation and the TCLPProcedures for High-intensity Discharge Lamp Sample Preparation and the TCLPProcedures for Incandescent Lamp Sample Preparation and the TCLPProcedure for U-shaped Fluorescent Lamp Sample Preparation and the TCLPProcedures for Integral Electronic Compact Fluorescent Lamp Sample Preparation and the TCLPGeneric Designation System for Pin-Based Compact Fluorescent and T5 Twin Fluorescent LampsLimits on Mercury Content in Self-Ballasted Compact Fluorescent LampsDimming of T8 Fluorescent Lighting SystemsLow-Voltage Surge-Protection (LVSP) DevicesA Guide for the Safe Use of Remote Illumination Systems Equipment, Including a Glossary of DefinitionsWhite Paper on Outdoor Lighting Issues and Quality Lighting ApplicationsTungsten Halogen (TH) Lamps (Bulbs): Ultraviolet, Rupture and High Temperature RisksExit Sign Brightness for Visibility and SafetyGuidelines on the Application of Dimming to High-Intensity Discharge LampsRadioactive Substances in Compact Fluorescent LampsConsumer Guide for 4-Ft Fluorescent BulbsCompatibility of Fluorescent Lamps and Electronic Ballasts in Frequently Switched ApplicationsEnd-of-life Operation of Small Diameter (5/8 in. Diameter or Less) Pin-Based Fluorescent Lamps

Adjustable Speed Electrical Power Drive Systems, Part 1: General Requirements-Rating Specifications for Low Voltage Adjustable-Speed DC Power Drive Systems

Adjustable Speed Electrical Power Drive Systems, Part 2: General Requirements-Rating Specifications for Low Voltage Adjustable Frequency AC Power Drive Systems

Adjustable Speed Electrical Power Drive Systems, Part 4: General Requirements-Rating Specifications for AC Power Drive Systems Above 1,000 V AC and Not Exceeding 35 kV

Wiring Requirements for T8 Lamps with Instant-Start BallastsDemand Reduction and Energy Savings Using Occupancy SensorsRecommended Practice-Lamp Seasoning for Fluorescent Dimming SystemsMarking of Luminaire Codes on Metal Halide Lamps

Best Practices for Metal Halide Lighting Systems, Plus Questions and Answers about Lamp Ruptures in Metal Halide Lighting Systems

Best Practices for Operating Fluorescent Lighting SystemsIncompatibility of T8 Ballasts (RS, PS, Dimming) and Shunted Bi-Pin LampholdersApplication Note: Wiring Requirements for T8 Fluorescent Lamps with Instant-Start BallastsApplication Note: Wiring Requirements for 2G11 Based T5 Fluorescent Twin Lamps With Instant-Start BallastsA Lighting Systems Division Information Bulletin: Changes to the 2005 NEC Will Impact Future Metal Halide Systems OptionsInteraction of Infrared Controls and Electronic Compact Fluorescent LampsRecommended Practices for T8 Rapid-Start Fluorescent Lamp Dimming (17 W, 25 W, 32 W and 40 W Lamps)ANSI Code Update to Include Letter C for Ceramic Metal Halide LampsEffects of EPAct 2005 on Mercury Vapor (MV) Lamp Ballasts and Lighting Systems-Frequently Asked QuestionsFour-Pin Spiral Compact Fluorescent Lamp Systems Issues, Recommendations and StandardizationFailure Modes for Self-Ballasted Compact Fluorescent Lamps (SBCFLs)-A NEMA UpdateUN2911 Labeling and Transportation of Lamps Containing Radioactive SubstancesGlossary of Terms Pertaining to Remote Illumination SystemsLuminaire Ballast DisconnectsSolid State Lighting-The Need for a New Generation of Sockets and InterconnectsRecommendations for Solid State Lighting Sub-Assembly Interfaces for LuminairesPhotoluminescent Exit Signage-Factual ReviewLead in Household LampsSolid State Lighting for Incandescent Replacement-Best Practices for DimmingSolid State Lighting-Definitions for Functional and Decorative Applications34 W Fluorescent Lamps and High-Frequency Electronic BallastsProposal for Digital Protocol for Lighting Control DevicesThe Strengths and Potentials of Metal Halide Lighting SystemsOutdoor Lighting and Human/Animal Factors: An Industry Opinion

Air Infiltration Ratings for Recessed LuminairesThe Effects of Dimming on Color and Efficacy of LED LampsFluorescent Dimming Standards Development ReportInteraction of Infrared Controls and Fluorescent Lamp/Ballast Systems in Education FacilitiesSystems Approach for LightingMeasurement Methods and Performance Variation for Verification Testing of General Purpose Lamps and SystemsLighting Controls TerminologyNEMA Guide to Emergency LightingUnderstanding the New Fluorescent Ballast Rule EPCA 10 CFR 430Ultraviolet Radiation (UV) from Fluorescent LampsCompact Fluorescent Lamps in Residences-Power Quality ImplicationsCompatibility of Add-on Tube Guards with T8 Fluorescent Lamps Operating on High-Frequency Electronic BallastsFluorescent Lamps and the EnvironmentEnergy Management Guide for Selection and Use of Fixed Frequency Medium AC Squirrel-Cage Polyphase Induction Motors

Compatibility of Forward Phase Control Dimmers and Dimmable Self-Ballasted Compact Fluorescent Lamps and Frequently Asked Questions Regarding CFLs and Dimming

Energy Management Guide for Selection and Use of Single-Phase Motors

Information Guide for General Purpose Industrial AC Small and Medium Squirrel-Cage Induction Motor StandardsSafety Standard for Construction and Guide for Selection, Installation and Use of Electric Motors and GeneratorsSound Level Prediction for Installed Rotating Electrical MachinesThe U.S. Department of Energy Small Electric Motor Standards Final Rule and Technical Support Document of March 9, 2010Determination of Local Specific Absorption Rate (SAR) in Diagnostic Magnetic Resonance Imaging (MRI)Determination of Gradient-Induced Electric Fields in Diagnostic Magnetic Resonance ImagingDetermination of Signal-to-Noise Ratio (SNR) in Diagnostic Magnetic Resonance ImagingQuantification and Mapping of Geometric Distortion for Special ApplicationsDetermination of Two-Dimensional Geometric Distortion in Diagnostic Magnetic Resonance ImagesDetermination of Image Uniformity in Diagnostic Magnetic Resonance ImagesAcoustic Noise Measurement Procedure for Diagnostic Magnetic Resonance Imaging (MRI) DevicesDetermination of Slice Thickness in Diagnostic Magnetic Resonance Imaging

Measurement Procedure for Time Varying Gradient Fields (dB/dt) for Magnetic Resonance Imaging SystemsCharacterization of the Specific Absorption Rate (SAR) for Magnetic Resonance Imaging SystemsCharacterization of Phased Array Coils for Diagnostic Magnetic Resonance Images (MRI)Test Procedures for Magnet Wire Plastic Spools/ReelsDynamic Coefficient of Friction of Film-Insulated Magnet WireStraight Flange Magnet Wire Plastic Spools/ReelsTapered Flange Magnet Wire Plastic Spools/ReelsReclaiming of Magnet Wire PackagingUnified Customer Labeling for Magnet Wire ProductsReturnable Packaging for 24x6 Magnet Wire ReelsSimulated Insertion Force Test for Film-Insulated Round Magnet WireAC Overload Test for Film Insulated Magnet WireGuidelines for Precautionary Labeling of Magnet WireGuide for Preparation of NEMA Standards PublicationsPerformance Measurements of Gamma CamerasPerformance Measurements of Positron Emission Tomographs (PETs)Performance Measurements and Quality Control Guidelines for Non-Imaging Intraoperative Gamma ProbesPerformance Measurements of Small Animal Positron Emission Tomographs (PETs)Selection and Installation Guidelines for Electrical Outlet BoxesGeneral Instructions for Proper Installation, Operation and Maintenance of Panelboards Rated 600 V or Less

Deadfront Distribution SwitchboardsUninterruptible Power Systems (UPS)-Specification and Performance VerificationUtility-Type Battery ChargersCommunications-Type Battery ChargersSolvent-Cementing Joints for PVC Rigid Nonmetallic Conduit, Duct and FittingsExpansion Epoxy-Based Fittings for RTRC Rigid Nonmetallic Conduit

Determination of Signal-to-Noise Ratio and Image Uniformity for Single-Channel, Non-Volume Coils in Diagnostic Magnetic Resonance Imaging (MRI)

Panelboards

General Instructions for Proper Handling, Installation, Operation and Maintenance of Deadfront Distribution Switchboards Rated 600 V or Less

Application Guide for Ground-Fault Protective (GFP) Devices for Equipment

Expansion Fittings for Polyvinyl Chloride (PVC) Rigid Nonmetallic ConduitElectrical Insulating VarnishPolyvinyl Chloride (PVC) Externally Coated Galvanized Rigid Steel Conduit and Intermediate Metal Conduit

Product Identification Numbers for Metallic Tubular Conduit Products for Use with Bar Coding and Electric Data Interchange (EDI) Applications

Application and Installation Guidelines for Armored Cable (AC) and Metal-Clad (MC) Cable

Application and Installation Guidelines for Nonmetallic-Sheathed (NM-B) Cable and Underground Feeder and Branch Circuit (UF-B) Cable

Application and Installation Guidelines for Flexible and Liquidtight Flexible Metal and Nonmetallic ConduitsApplication Guidelines for Service-Entrance CableAudio Standard for Nurse Call SystemsGuide for Proper Use of System Smoke DetectorsQuality Informational Guide for Automatic Fire Detection and Alarm SystemsGuide for Proper Use of Smoke Detectors in Duct ApplicationsNEMA Installation Guide for Nurse Call Systems (R2007)Training Manual on Fire Alarm SystemsProduct Safety Guide for Developing Documentation for Fire Alarm Systems and EquipmentImpact of Electrostatic Discharges in the Hospital EnvironmentFire Service Annunciator and InterfaceInterconnection Circuitry of Noncoded Remote Station Protective Signaling SystemsEmergency Communications Audio Intelligibility Applications GuideApplications Guide for Carbon Monoxide Alarms and DetectorsLooking Ahead to UL 2560

Power Switchgear Assemblies

Requirements for Smart Meter UpgradeabilitySteam Turbines for Mechanical Drive ServiceLand-Based Steam Turbine Generator Sets 0 to 33,000 kWElectronic Drivers for LED Devices, Arrays or SystemsHigh-Power White LED Binning for General IlluminationRetrofit Lamps: Minimum Performance RequirementsSolid State Lighting for Incandescent Replacement-DimmingPhase Cut Dimming for Solid State Lighting: Basic CompatibilityDry Type Transformers for General ApplicationsElectrical Nonmetallic Tubing (ENT)Reinforced Thermosetting Resin Conduit (RTRC) and FittingsPackaging of Master Bundles for EPC-40 Polyvinyl Chloride (PVC) ConduitNonmetallic Riser U-Type GuardsElectrical Polyvinyl Chloride (PVC) Tubing and ConduitPolyvinyl Chloride (PVC) Fittings for Use with Rigid PVC Conduit and Tubing

Packaging of Master Bundles for Electrical Rigid Metal Conduit (ERMC)-Steel, Electrical Intermediate Metal Conduit (EIMC)-Steel, and Electrical Metallic Tubing (EMT)-Steel

Guide to OSHA and NFPA 70E Safety Regulations when Servicing and Maintaining Medium Voltage Switchgear and Circuit Breakers Rated Above 1,000 V

Guide for Handling and Maintenance of AC Outdoor High Voltage Circuit BreakersAlternating Current High Voltage Circuit Breakers

Power Switching Equipment

Polyvinyl Chloride (PVC) Plastic Utilities for Underground InstallationsSmooth Wall Coilable Electrical Polyethylene ConduitFittings for Polyvinyl Chloride (PVC) Plastic Utilities Duct for Underground InstallationNEMA Guidelines for the Selection and Installation of Underground Nonmetallic DuctUser's Manual for the Installation of Underground Corrugated Coilable Plastic Utility Duct (CCD)Coated Electrical SleevingUncoated Treated Fiberglass Sleeving

Traffic Control Systems (Not Recommended for New Designs)Traffic Controller Assemblies with NTCIP Requirements-Version 02.06Contactor AmendmentFlashing Yellow Arrow (FYA) AmendmentHardware Standards for Dynamic Message Signs (DMS) with NTCIP RequirementsUndercarpet Power Distribution SystemsAcoustic Output Measurement Standard for Diagnostic Ultrasound Equipment, Revision 3

Standard for Real-Time Display of Thermal and Mechanical Acoustic Output Indices on Diagnostic Ultrasound Equipment, Revision 2

Metal Cable Tray SystemsCable Tray Installation GuidelinesBinational Wire and Cable Packaging Standard

Ampacities, Including Effect of Shield Losses for Single-Conductor Solid Dielectric Power Cable 15 kV through 69 kV

High-Temperature and Electronic Insulated Wire, Impulse Dielectric Testing

3.0 kHz Insulation Continuity Proof Testing of Wire and Cable

Portable and Power Feeder Cables for Use in Mines and Similar ApplicationsProduct Identification and Bar Coding Requirements for Building Wire ProductsRepeated Spark/Impulse Dielectric TestingPerformance Standard for Twisted Pair Premise Voice and Data Communications Cables

Continuity of Coating Testing for Electrical ConductorsWire Selection Guidelines for Wires Rated at 200° to 450°CGeneral Color Requirements for Wiring DevicesOccupancy Motion Sensors StandardDimmers, Photoelectric Controls, Presence Sensors, and Multi-outlet Bars Energy Consumption Testing and LabelingMeasurement of the Maximum Symmetrical Radiation Field from a Rotating Anode X-Ray Tube Used for Medical DiagnosisTest Standard for the Determination of the Limiting Spatial Resolution of X-Ray Image Intensifier SystemsMechanical Safety Standard for Power Driven Motions of Electromedical EquipmentRecommended Practices for Load-Bearing Mechanical Assemblies Used in Diagnostic ImagingTest Standard for the Determination of the Visible Entrance Field Size of an X-Ray Image Intensifier (XRII) System

Test Standard for the Measurement of the Image Signal Uniformity of an X-Ray Image Intensifier (XRII) System

Guide for Determining Energy Efficiency for Distribution TransformersStandard Test Method for Measuring the Energy Consumption of Distribution TransformersStandard for the Labeling of Distribution Transformer EfficiencyTransformers, Regulators and Reactors

A Reasoned Approach to Solving Solderability Problems with Tin-Coated and Nickel-Coated Stranded Conductors in High-Performance Wire and Cable Applications

Test Standard for the Determination of the System Contrast Ratio (SCR) and the System Veiling Glare Index (SVGI) of an X-Ray Image Intensifier (XRII) System

Test Standard for the Determination of the Radial Image Distortion of an X-Ray Image Intensifier (XRII) SystemElectrical, Thermal and Loading Characteristics of X-Ray Tubes Used for Medical DiagnosisCharacteristics of and Test Procedures for a Phantom to Benchmark Cardiac Fluoroscopic and Photographic Performance

Primary User Controls for Interventional Angiography X-Ray EquipmentComputed Tomography Dose CheckAccess Controls for Computed Tomography: Identification, Interlocks, and LogsX-ray Equipment for Interventional Procedures User Quality Control ModeStandard Attributes on CT Equipment Related to Dose Optimization and ManagementMeasurement of Dimensions and Properties of Focal Spots of Diagnostic X-Ray TubesHigh Voltage X-Ray Cable Assemblies and ReceptaclesPower Supply Guidelines for X-Ray MachinesSimple Transportation Management FrameworkOctet Encoding Rules (OER) Base ProtocolTransportation Management Protocols (TMP)Center-to-Center Naming Convention SpecificationGlobal Object (GO) DefinitionsObject Definitions for Actuated Traffic Signal Controller (ASC) Units-Version 02Object Definitions for Dynamic Message Signs (DMS)Object Definitions for Environmental Sensor Station (ESS)Object Definitions for Closed-Circuit Television (CCTV) Camera ControlObject Definitions for Data Collection and Monitoring (DCM) DevicesObject Definitions for Ramp Meter Control (RMC) UnitsObject Definitions for Closed-Circuit Television (CCTV) SwitchingData Element Definitions for Transportation Sensor Systems (TSS)Object Definitions for Signal Control and Prioritization (SCP)Object Definitions for Electrical and Lighting Management Systems (ELMS)TCIP Framework StandardStandard on Common Public Transportation (CPT) ObjectsStandard on Incident Management (IM) ObjectsStandard on Passenger Information (PI) ObjectsStandard on Scheduling/Runcutting (SCH) ObjectsStandard on Spatial Representation (SP) ObjectsStandard on On-Board (OB) ObjectsStandard on Control Center (CC) ObjectsStandard on Fare Collection (FC) Business Area ObjectsNational Transportation Communications For ITS Protocol-Class B ProfilePoint to Multi-Point Protocol Using RS-232 Subnetwork ProfilePoint to Multi-Point Protocol Using FSK Modem Subnetwork ProfilePoint-to-Point Protocol over RS-232 Subnetwork ProfileEthernet Subnetwork ProfileTransportation Transport ProfileInternet (TCP/IP and UDP/IP) Transport Profile

Quality Control Manual Template for Manufacturers of Displays and Workstations Labeled for Final Interpretation in Full-Field Digital Mammography (FFDM)

Quality Control Manual Template for Manufacturers of Hardcopy Output Devices Labeled for Final Interpretation in Full-Field Digital Mammography (FFDM)

Simple Transportation Management Framework (STMF) Application Profile (AP) (AP-STMF)Trivial File Transfer Protocol Application ProfileFile Transfer Protocol Application ProfileApplication Profile for DATEX-ASN (AP-DATEX)Application Profile for XML Message Encoding and Transport in ITS Center-to-Center CommunicationsProfile FrameworkStructure and Identification of Management Information (SMI)Procedures for Creating Management Information Base (MIB) FilesTesting and Conformity Assessment Documentation within NTCIP Standards PublicationsThe NTCIP GuideProcedure for Evaluating Ground Fault Circuit Interrupters for Response to Conducted Radio Frequency EnergyDigital Imaging and Communications in Medicine (DICOM) Part 13: Print Management Point-to-Point Communication SupportDigital Imaging and Communications in Medicine (DICOM) Part 9: Point to Point Communication Support for Message ExchangeSpecialty Transformers (Except General Purpose Type)

Steel Armor and Associated Coverings for Impregnated Paper Insulated Cables (ICEA S-67-401 Fifth Edition)

Rubber-Insulated Wire & Cable for the Transmission & Distribution of Electrical Energy

Varnished Cloth Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy

Thermoplastic-Insulated Wire & Cable for the Transmission & Distribution of Electrical EnergyBar Coding and Control Wire and Cable ProductsCross-Linked-Thermosetting-Polyethylene-Insulated Wire & Cable for the Transmission & Distribution of Electric EnegyEthylene-Propylene-Rubber-Insulated Wire & Cable for the Transmission & Distribution of Electrical Energy

No longer available in market

Nema 1998 also available

No longer available in market

NTCIP

i) NEMAii) American Association of State Highway and Transportation Officials (AASHTO)iii) Institute of Transportation Engineers (ITE)

NTCIP Website Resources

I) A document library (including the drafts that are waiting for publication and those available for user comment).

II) Discussion forums for outreach and deployment, Testing NTCIP systems, comments on each of the standards, and for status reports of the committees.

III) A protocol chart to aid the user in selecting the compatible standards that can be used for deployment of equipment over different communications media.

History of the NTCIP Development

Parts of the NTCIP Family

The development of the NTCIP standards documents branched off in two directions: object definitions and communications profiles.

i) Object definitions define particular types of roadside devices and control products, such as traffic signal controllers or dynamic message signs.

iii) Communications profiles identify standard groupings of layered profiles. The profiles are also based on international communications standards.

I) Actuated traffic signal systemsII) Variable message signsIII) Environmental sensor stations

The National Transportation Communications for Intelligent Transportation Systems (ITS) Protocol is a family of standards that define the functional control and communications profiles for electronic traffic control equipment.

The NTCIP has received funding from the U.S. Department of Transportation’s Federal Highway Administration, as part of the Intelligent Transportation Systems program, and is a joint project of these groups:

NEMA initiated the development of the NTCIP in 1992. Since then, AASHTO and ITE joined with NEMA to form a Joint Committee on the NTCIP, which provides guidance for the overall project. The Joint Committee has in turn formed 14 technical working groups to develop and maintain the standards, and has initiated or produced over joint 50 standards and information reports.

Those interested in volunteering to serve on the NTCIP working groups should contact the NTCIP Coordinator at NEMA. Project participants have access to password-protected FTP areas and e-mail listservs.

In early 1993, the FHWA brought together transportation industry representatives to discuss the obstacles in the way of installing equipment for new Intelligent Transportation Systems (ITS). The representatives said that the number one priority was the need for an industry-wide standard communications protocol. Since the NEMA Transportation Section members had already started a part of a new industry standard, they offered to expedite and expand the scope of their activities.

The key objects of the new NTCIP protocol were the interchangeability of similar roadside devices, and the interoperability of different types of devices on the same communications channel.

In 1996, the FHWA suggested a partnership of standards developing organizations to expand both user and industry involvement. The American Association of State Highway and Transportation Officials (AASHTO) and the Institute of Transportation Engineers (ITE) signed an agreement with NEMA to establish the Joint Committee on the NTCIP, and to work together on completing the NTCIP.

ii) An “object” is an abstract computer term, representing a range of values or functions that can be accessed or remotely controlled. The object is “defined,” like in a dictionary, so that everyone uses the same spelling of its name.) The definition of the objects is based on another Internet standard developed for controlling networked computers.

The analogy is sometimes made that the objects are the “vocabulary,” and the profiles are the communications rules (“you talk; I listen”), that allow devices from different manufacturers to talk with each other and operate as a system.

Beginning in 1999, the field deployment of interoperable equipment was a success because the NTCIP enabled equipment from different manufacturers to interoperate and control:

More types of roadside devices are on the way.

ANSILamps C78CB C37Area & Road lighting C136Connectors C119Battaries C18Insulators C29Conduits C80Lamp Ballasts C82Arc-Welding Equipment ANSI/IEC 60974

all ansi standards list

Documents