ales kit undercarriage - monarch parts

Parts sales Kit Undercarriage7th Edition

PECP3003-06www.cat.com

© 2010 Caterpillar • All Rights Reserved • Printed in USACAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

cat® dealers define world-

class ProdUct sUPPort.

We offer you the right parts and service

solutions, when and where you need them.

The Cat Dealer network of highly trained

experts keeps your entire fleet up and running

to maximize your equipment investment.

7th Edition Pa

rts sales Kit U

nd

ercarria

ge

1

Undercarriage Parts Sales KitTABLE OF CONTENTS

UndercarriageMODELS PAGE NO.

Introduction 2................................................................................................................Elevated Sprocket Tractors 3.......................................................................................Skidders 207..................................................................................................................Low Sprocket Tractors 245..........................................................................................Track-Type Loaders 425...............................................................................................Classic 579.....................................................................................................................Nexus 595......................................................................................................................Excavators/Front Shovels 597.....................................................................................Timberking 873.............................................................................................................Mini Hydraulic Excavators 889....................................................................................Multi-Terrain Loaders, Compact Track Loaders 907..................................................Paving Products 933.....................................................................................................Product Information 959..............................................................................................Conversion Guide 983..................................................................................................Part Number Index 996................................................................................................

2

IntroductionIntroduction

This Undercarriage book is designed to provide dealer salespeople (field and instore) with partnumbers and product information as well as features and benefits for selected parts and service commodities.It is a quick reference tool which lists part numbers and applications for items that are new, competitiveand high in sales volume and sales potential.

The Undercarriage book should not be used as a substitute for Parts Books, Numerical Parts Record,Parts Pricing Medium or any other formal reference publication. All part numbers, specifications andapplication data published in the Undercarriage book are subject to change without notice. Any informationtaken from this publication for use in preparing a Parts Sales Order or Price Quotation shouldalways be verified against the Numerical Parts Record in accordance with the ManagementPartsgram entitled “The Numerical Parts Record.”

Cat®

3

Elevated Sprocket TractorsINDEX

Elevated Sprocket TractorsMODELS PAGE NO.

D5N, D5M, D4H, 561N, 561M, 561H 4.........................................................................D6N, D6M, D5H 33........................................................................................................D6T, D6R, D6H 66.........................................................................................................D7R, D7H, 572R 113......................................................................................................D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578 143......................................................D8L 162..........................................................................................................................D9T, D9R, D9N 168.......................................................................................................D9L, 589 175..................................................................................................................D10T, D10R, D10N 181.................................................................................................D10 192..........................................................................................................................D11T, D11R, D11N 197.................................................................................................

4

Elevated Sprocket TractorsD5N, D5M, D4H, 561N, 561M, 561H

D5N, D5M, D4H SystemOne™ TRACKPRESS FIT MASTER LINK

D5N/M XL, D4H XL (41 SECTION): 8PJ664-UP 6GN1-UP, 5ES1-UP, 4BR1-UP, 4JS1-UP, AGG1-UP, CFH1-UP

D5N/M LGP, D4H LGP, (44 SECTION): 9GJ1116-UP, 4NK164-UP, 3CR1-UP, 6AS1-UP, 3DR1-UP, 5FS1-UP,7LR1-UP, AKD1 UP, CKT1-UP

6.75" (171.5 mm) PITCH - 16 mm BOLT

PARTNUMBER

XL41 Section

LGP44 Section

Link Assembly -- (Quantity 2) 312-2273 312-2270

Components of Link Assembly

Link Box Standard 312-2269 1 19 22

Link Box Offset 312-2271 2 1 --

Standard Link 235-2514 38 42

Standard Link (Press Fit) 3 235-2514 2 2

Track Hardware 3

Bolt (M16) 218-3274 164 176

Nut 5I-6125 164 176

1 Link Box Standard that is greater than 40% worn should be replaced with part number 264-9765.2 Link Box Offset that is greater than 40% worn should be replaced with part number 264-9770.3 Not part of link assembly; required to assemble track group.

D5N, D5M, D4H SystemOne™ TRACKCLAMP MASTER


D5N/M LGP, D4H LGP, (44 SECTION): 9GJ1116-UP, 4NK164-UP, 3CR1-UP, 6AS1-UP, 3DR1-UP, 5FS1-UP,7LR1-UP, AKD1 UP, CKT1-UP

6.75" (171.5 mm) PITCH - 16 mm STANDARD BOLT 18 mm MASTER BOLT

PARTNUMBER

XL41 Section

LGP44 Section



Link Box Standard 312-2269 1 19 22

Link Box Offset 312-2271 2 1 --


Clamp Master Link 3 235-2620 2 2

Track Hardware 3

Bolt (M16) 218-3274 160 172

Nut 5I-6125 160 172

Track Master Bolt (M18) 254-0227 4 4 4

1 Link Box Standard that is greater than 40% worn should be replaced with part number 264-9765.2 Link Box Offset that is greater than 40% worn should be replaced with part number 264-9770.3 Not part of link assembly; required to assemble track group.4 It is recommended that track bolt 254-0227 at the clamp master joint be replaced at 1,500 hours to prevent possible bolt loosening and/or bolt breakage.

5


D5N, D5M, D4H, 561N, 561M, 561H, HEAVY DUTY SEALED AND LUBRICATED TRACK 1

D4H STD (39 SECTION): 2AC5597-UP, 8PB6091-UP


D5N/M LGP, D4H LGP, 561N/M/H (44 SECTION): 9GJ1116-UP, 4NK164-UP, 3CR1-UP, 6AS1-UP, 3DR1-UP,5FS1-UP, 7LR1-UP, 6NL383-UP, AKD1 UP, CKT1-UP, 1KW1-UP, 1CPH-UP

6.75" (171.5 mm) PITCH - 5/8" BOLT

PARTNUMBER

STD39 Section

XL41 Section

LGP44 Section

Link Assembly -- (Quantity 2) 108-0953 108-0955 108-0954

Track Links

RH Pin End Master 108-0949 1 1 1

LH Pin End Master 108-0950 1 1 1

RH Bushing End Master 108-0951 1 1 1

LH Bushing End Master 108-0952 1 1 1

RH Regular 108-0947 38 40 43

LH Regular 108-0948 38 40 43

Other Components

Pin 108-0943 39 41 44

Bushing 108-0944 39 41 44

Seal Assembly (Rigid) 250-3992 78 82 88

Thrust Ring 152-8069 78 82 88

Stopper 5G-2247 39 41 44

Plug 6Y-0473 39 41 44

Track Hardware 2

Bolt 9G-3110 152 160 172

Bolt (Self-Cleaning Shoe) 9G-3110 86

Bolt (Self-Cleaning Shoe) 3T-3884 86

Nut 1M-1408 152 160 172

Master Bolt 9G-8592 2 2 2

Master Bolt 3T-8601 2 2 2

Master Bolt (Self-Cleaning Shoe) 9G-8592 2

Master Bolt (Self-Cleaning Shoe) 3T-3889 2

Special Sets/Groups

Seal Set (88 Seal Assemblies) 252-7856 1 1 1

Bushing and Seal Group (39 Sections) 115-2438 1 1 1

1 When installing Heavy Duty Track on existing machines refer to IRM UC94-18 for installation and guarding information. Also refer toSpecial Instruction SEHS9805 for additional guarding information.2 Not part of link assembly; required to assemble track group.

D5N XL, D5M XL MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIES

QUANTITYPART

NUMBER

Link Assembly Used 108-0955

Moderate Service Shoe -- 22" (560 mm) 2 108-2622

6


D5N LGP, D5M LGP MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIES

QUANTITYPART

NUMBER



D5N XL/LGP, D5M XL/LGP, D4H STD/XL/LGP ROTATING BUSHING TRACK 1

STD: 2AC5597-UP, 8P6091-UPXL: 8PJ664-UP, 6N1-UP, 5ES1-UP, 4BR1-UP, 4JS1-UP, AGG1-UP, CFH1-UP

LGP: 9GJ1116-UP, 4NK164-UP, 3CR1-UP, 6AS1-UP, 3DR1-UP, 5FS1-UP, 7LR1-UP, AKD1-UP, CKT1-UP6.75" (171.5 mm) PITCH - 5/8" BOLT

PARTNUMBER

STD39 Section

XL41 Section

LGP44 Section

Link Assembly (Quantity 2) 152-8040 2 152-8039 3 152-8038 4

Track Links



RH Bushing End Master 5 165-1748 1 1 1

LH Bushing End Master 5 165-1749 1 1 1

RH Regular 5 165-1746 38 40 43

LH Regular 5 165-1747 38 40 43

Other Components

Pin 152-8075 39 41 44

Bushing 165-1767 39 41 44


Thrust Ring 152-8069 156 164 176

Stopper 5G-2247 39 41 44

Plug 6Y-0473 39 41 44

Track Hardware 6

Bolt 9G-3110 152 160 172

Nut 1M-1408 152 160 172

Master Bolt 9G-8592 2 2 2

Master Bolt 3T-8601 2 2 2

1 Rotating Bushing Track is an application specific undercarriage designed for high abrasion/low impact applications (4,000 hour systemor less). When installing Rotating Bushing Track on existing machines, refer to IRM UC95-11 for installation and guarding information.Also refer to Special Instruction SEHS9805 for additional guarding information. For servicing information refer to Special InstructionSEHS9542. This product is not for use on Track Skidders and 561H Pipelayers.2 Serviced replaced by 108-0953 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.3 Serviced replaced by 108-0955 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.4 Serviced replaced by 108-0954 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.5 Joint assemblies (includes link and insert). Insert not serviced.6 Not part of link assembly; required to assemble track group.

7


D4H STD/XL/LGP, 561H SEALED AND LUBRICATEDLARGE STEPPED BUSHING, RIGID SEAL ASSEMBLY

D4H STD (39 SECTION): 2AC1-5596, 8PB1-6090D4H XL (41 SECTION): 8PJ1-663

D4H LGP, 561H (44 SECTION): 3AC1-UP, 4NK1-163, 6NL1-382, 9DB1-UP, 9GJ1-11156.75" (171.5 mm) PITCH -- 5/8" BOLT

PARTNUMBER

STD39 Section

XL41 Section

LGP44 Section

Link Assembly -- (Quantity 2) 227-9976 228-2743 228-2744

Track Links

RH Pin End Master 6Y-9263 1 1 1

LH Pin End Master 6Y-9264 1 1 1

RH Bushing End Master 9G-8585 1 1 1

LH Bushing End Master 9G-8586 1 1 1

RH Regular 6Y-9261 38 40 43

LH Regular 6Y-9262 38 40 43

Other Components

Pin 160-7816 39 41 44

Bushing 224-3959 39 41 44

Seal Assembly 250-4000 78 82 88

Thrust Ring 6Y-6486 78 82 88

Stopper 5G-2247 39 41 44

Plug 6Y-0473 39 41 44

Track Hardware 1

Bolt (Grouser shoe) 9G-3110 152 160 172

Bolt (Self-Cleaning Shoe) 9G-3110 -- -- 86

Bolt (Self-Cleaning Shoe) 3T-3884 -- -- 86

Nut 1M-1408 152 160 172

Master Bolt (Grouser Shoe) 9G-8592 2 2 2

Master Bolt (Grouser Shoe) 3T-8601 2 2 2

Master Bolt (Self-Cleaning Shoe) 9G-8592 -- -- 2

Master Bolt (Self-Cleaning Shoe) 3T-3889 -- -- 2

Special Sets/Groups



1 Not part of link assembly; required to assemble track group.

8


D4H STD/XL/LGP, 561H SEALED AND LUBRICATEDRIGID SEAL ASSEMBLY



PARTNUMBER

STD39 Section

XL41 Section

LGP44 Section

Link Assembly -- (Quantity 2) -- 1 -- 2 -- 3

Track Links





RH Regular 6Y-9261 38 40 43

LH Regular 6Y-9262 38 40 43

Other Components

Pin 160-7816 39 41 44

Bushing 9G-8588 39 41 44

Seal Assembly 250-4000 78 82 88

Thrust Ring 6Y-6486 78 82 88

Stopper 5G-2247 39 41 44

Plug 6Y-0473 39 41 44

Track Hardware 4

Bolt (Grouser shoe) 9G-3110 152 160 172

Bolt (Self-Cleaning Shoe) 9G-3110 -- -- 86

Bolt (Self-Cleaning Shoe) 3T-3884 -- -- 86

Nut 1M-1408 152 160 172

Master Bolt (Grouser Shoe) 9G-8592 2 2 2

Master Bolt (Grouser Shoe) 3T-8601 2 2 2

Master Bolt (Self-Cleaning Shoe) 9G-8592 -- -- 2

Master Bolt (Self-Cleaning Shoe) 3T-3889 -- -- 2

Special Sets/Groups


Bushing and Seal Group (39 Sections) -- 5 1 1 1

1 Service replaced by (1) 227-9976 link assembly and (5) 108-0946 sprocket segments.2 Canceled and replaced by (1) 228-2743 link assembly and (5) 108-0946 sprocket segments.3 Service replaced by (1) 228-2744 link assembly and (5) 108-0946 sprocket segments.4 Not part of link assembly; required to assemble track group.5 Order (1) 227-9954 Seal and Bushing Group and (5) 108-0946 sprocket segments.

9


D4H STD/XL/LGP, 561H SEALED AND LUBRICATED TRACKCRESCENT SEAL ASSEMBLY



QUANTITYPART

NUMBER

Link Assembly -- 39 Section 2 -- 1

Track Links

RH Pin End Master 1 9G-8583

LH Pin End Master 1 9G-8584

RH Bushing End Master 1 9G-8585

LH Bushing End Master 1 9G-8586

RH Regular 38 9G-8581

LH Regular 38 9G-8582

Other Components

Pin 39 154-3664

Bushing 39 9G-8588

Seal Assembly 78 3T-5634 2

Thrust Ring 78 9G-8591

Stopper 39 5G-2247

Plug 39 6Y-0473

Track Hardware 3

Bolt (Grouser Shoes) 152 9G-3110

Nut 152 1M-1408

Master Bolt (Grouser Shoes) 2 9G-8592

Master Bolt (Grouser Shoes) 2 3T-8601

Bolt (Self-Cleaning Shoe) (LGP, 44 Section) 86 9G-3110

Bolt (Self-Cleaning Shoe) (LGP, 44 Section) 86 3T-3884

Master Bolt (Self-Cleaning Shoe) (LGP, 44 Section) 2 9G-8592

Master Bolt (Self-Cleaning Shoe) (LGP, 44 Section) 2 3T-3889

Special Sets/Groups

Bushing and Seal Group (39 Sections) 1 6Y-3879

1 If 39, 41, 44, section link assemblies are required upgrade to sealed and lubricated track, with rigid seals.2 Serviced Replaced By: 260-8739.3 Not part of link assembly; required to assemble track group.

10


D5N LGP,D5M LGP, D4H LGP HEAVY DUTY TRI/QUAD TRACK 1

3CR1-UP, 3DR1-UP, 4NK164-UP, 5FS1-UP, 6AS1-UP, 7LR1-UP, 9GJ1116-UP, AKD1-UP6.75" (171.5 mm) PITCH -- 5/8" BOLT

QUAD TRACKQUANTITY

TRI TRACKQUANTITY

PARTNUMBER

Link Assembly -- 44 Section 2 2 108-0954 2

Track Links

RH Regular 44 44 3 108-0947

LH Regular 44 44 4 108-0948

Other Components

Stub Pin 88 44 108-2639

Stub Bushing 88 44 108-2640Track Hardware (Per side: Quad -- 1 center chain & 2 outriggers; Tri-- 1 center chain & 1 outrigger) 5

Bolt 344 258 9G-3110

Nut 344 258 1M-1408

Master Bolt 4 3 9G-8592

Master Bolt 4 3 3T-8601

1 When installing Heavy Duty Track on existing machines refer to IRM UC94-18 for installation and guarding information. Also refer toSpecial Instruction SEHS9805 for additional guarding information. For more information about Quad or Tri Link track, refer to IRM 91-18and special instruction SEHS8881.2 Refer to Heavy Duty Track section for component information.3 Required for right hand outrigger chain.4 Required for left hand outrigger chain.5 Not part of link assembly; required to assemble track group.

D5N, D5M, D4H SystemOne TRACK SHOES6.75" (171.5 mm) PITCH -- 16 mm BOLT

TYPE WIDTH PART NUMBER

MASTERSHOE PART

NUMBER

Moderate Service 18.0" (460 mm) 260-6769 255-1536

Moderate Service 20.0" (510mm) 260-6768 257-2336




Extreme Service 18.0" (460 mm) 260-6773 255-1537




Extreme Service (Center Hole) 30.0" (760 mm) 300-0417 300-0418 1

1 Track shoe is made as ordered (MAO) (not stocked in parts distribution centers) and typically has a 6-12 week lead-time.

11


D5N, D5M, D4H, 561N, 561M, 561H, TRACK SHOESSEALED AND LUBRICATED TRACK, HEAVY DUTY TRACK, ROTATING BUSHING TRACK

6.75" (171.5 mm) PITCH -- 5/8" BOLT

TYPE WIDTH

REGULARSHOE PART

NUMBER STD XL LGP 561H

Extreme Service 18.0" (460 mm) 6Y-5624 Y Y Y Y

Extreme Service 20.0" (510 mm) 8E-9816 N Y Y Y

Extreme Service 22.0" (560 mm) 8E-9814 N Y Y N

Extreme Service 24.0" (610 mm) 1Q-4754 N Y Y N

Extreme Service 30.0" (760 mm) 236-1870 N N Y N

Moderate Service 14.0" (355 mm) 3T-0356 Y N N N

Moderate Service 16.0" (405 mm) 3T-0358 Y N N N

Moderate Service 18.0" (460 mm) 3T-0360 Y Y N Y

Moderate Service (Center Punched) 18.0" (460 mm) 9W-3955 Y Y N N

Moderate Service 20.0" (510 mm) 8E-9812 N Y Y Y

Moderate Service 22.0" (560 mm) 8E-9810 N Y Y N

Moderate Service 24.0" (610 mm) 8E-4972 N N Y N

Moderate Service 26.0" (660 mm) 6I-9573 N N Y N

Moderate Service 30.0" (760 mm) 216-6286 N N Y N

Self-Cleaning 30.0" (760 mm) 6T-0232 N N Y N

Quad (MS) 23.0" (585 mm) 9W-7984 N N Y N

Quad (MS) 30.0" (760 mm) 9W-8326 N N Y N

Tri Offset RH (ES) 18.0" (460 mm) 8E-8526 N N N N

Tri Offset LH (ES) 18.0" (460 mm) 8E-8527 N N N N

D5N, D5M, D4H, 561N, 561M, 561H SPROCKETSHEAVY DUTY, SystemOne, ROTATING BUSHING, AND SEALED AND LUBRICATED TRACK

(PER SIDE) QUANTITYPART

NUMBER

Sprocket Segment (5 Tooth) 5 108-0946

Bolt 20 3S-8182

Nut 20 7H-3607

Washer 20 6V-4316

12


D5N XL, D5M XL, D4H XL, D4H IDLERSCURRENT DESIGN (SYMMETRIC SEALS)

INCREASED TREAD WEAR LIFE

(PER MACHINE) QUANTITY

FRONT IDLERLARGE DIA.

PART NUMBER

REAR IDLERSMALL DIA.

PART NUMBER

Idler Group 2 190-1551 190-1534

Components of Group

Idler Assembly 1 190-2495 190-1536

Bearing 1 2 8P-7002 8P-7002

Shaft 1 160-9757 160-9757

Collar 2 160-9756 160-9756

Retainer 2 160-9761 160-9761

Thrust Washer 2 137-9518 137-9518

Bolt 12 053-2294 053-2294

Washer 12 5M-2894 5M-2894

Seal -- Duo-Cone Group 2 161-7247 161-7247

Toric Ring 1 2 161-7249 161-7249

Seal -- Collar 1 5K-0216 5K-0216

Seal -- Retainer 2 2H-4145 2H-4145

Stopper 1 3T-9536 3T-9536

Plug 1 6Y-0473 6Y-0473

Mounting Hardware (D5N XL, D5M XL) 2

End Cap 2 108-1138 108-1138

Block 2 108-1136 108-1136

Bolt (16 mm) 4 8T-0282 8T-0282

Washer 4 5P-8247 5P-8247

Shim (Front Idlers Only) 4 3W-4346 3W-4346

Mounting Hardware (D4H, D4H XL) 2

End Cap 2 9N-4683 9N-4683

Block 2 9N-4680 9N-4680

Bolt (5/8") 4 1A-8651 1A-8651

Washer 4 5P-8247 5P-8247


1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 These components are not included in the idler group; quantities shown are required to mount each idler.

13


D5N LGP, D5M LGP, D4H LGP, 561N, 561M, 561H IDLERSCURRENT DESIGN (SYMMETRIC SEALS), LARGE TREAD DIAMETER


(PER MACHINE) QUANTITYPART

NUMBER

Idler Group 4 190-1551

Components of Group

Idler Assembly 1 190-2495

Bearing 1 2 8P-7002

Shaft 1 160-9757

Collar 2 160-9756

Retainer 2 160-9761

Thrust Washer 2 137-9518

Bolt 12 053-2294

Washer 12 5M-2894

Seal -- Duo-Cone Group (Symmetric) 2 161-7247

Toric Ring 1 2 161-7249

Seal -- Collar 2 5K-0216

Seal -- Retainer 2 2H-4145

Stopper 1 3T-9536

Plug 1 6Y-0473

Mounting Hardware (D5N LGP, D5M LGP) 2

End Cap 2 108-1138

Block 2 108-1136

Bolt (16 mm) 4 8T-0282

Washer 4 5P-8247

Shim (Front Idlers Only) 4 3W-4346

Mounting Hardware (D4H LGP, 561H) 2

End Cap 2 9N-4683

Block 2 9N-4680

Bolt (5/8") 4 1A-8651

Washer 4 5P-8247



14


D5N, D5M, D4H SystemOne CENTER TREAD IDLERSXL,LGP


NUMBER


Components of Group

Idler Assembly 1 228-3711 1

Bearing 2 2 8P-7002

Shaft 1 160-9757

Collar 2 160-9756

Retainer 2 160-9761


Bolt 12 053-2294

Washer 12 5M-2894

Seal -- Duo-Cone Group (Symmetric Seal) 2 161-7247

Toric Ring 2 2 161-7249



Stopper 1 3T-9536

Plug 1 6Y-0473

1 Service Replaced by 290-0750.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

D5N, D5M, XL/LGP SystemOne CENTER TREAD IDLER SCRAPERBOLT ON SCRAPER BASE PLATES


NUMBER

Base Plate 4 251-8596

Base Plate 4 251-8597

Scraper 8 251-8595

Bolt (12 mm) 8 8T-4910

Bolt (12 mm) 24 8T-4183

Washer 32 7D-1649

15


D5N, D5M, D4H XL/LGP SystemOne CENTER TREAD IDLER SCRAPERWELD ON SCRAPER BASE PLATES


NUMBER

Hardware Idler Arrangement (Includes hardware for 4 Idler groups) 1 296-0068 1

Components of Idler Hardware Arrangement

Plate- Scraper Base (Front) (Weld on) 2 248-5304

Plate- Scraper Base (Rear) (Weld on) 2 248-5325

Side Scraper 8 254-3802

Tread Scraper (Front Only) 2 254-3801

Scraper Bolt (12mm) 28 8T-4139

Scraper Washer 28 5P-1076

Plate (Weld to track roller frame front & rear) 8 271-6117

Scraper (Bolt to plates welded to track roller frame) (Lower guards) 8 271-6118

Bolt (12mm) 24 198-4778

Washer 24 8T-4183

Shim (For XL, LGP Front Idlers) 4 254-4433

Shim (For Only LGP Rear Idlers ) 4 254-4432

Block 8 248-5326

Bolt (16mm) (For D5N/M machines) 16 6V-7675

Bolt (5/8 Inch) (For D4H machines) 16 1D-4593

Washer 16 5P-8247

End Cap 2 8 108-1138

1 This arrangement contains only metric bolts to bolt the blocks and end caps to the track roller frame for D5N/M machines. For D4Hmachines must order inch bolts separately (1D-4593) to bolt the blocks and end caps to the track roller frame.2 This part is not included within the hardware arrangment. Needs to be ordered separately or reused from current design.

16


D5M XL, D4H XL, D4H IDLERSFORMER DESIGN


FRONT IDLERLARGE DIA.

PART NUMBER

REAR IDLERSMALL DIA.

PART NUMBER

Idler Group 2 -- --

Components of Group

Idler Assembly 1 190-2495 190-1536

Bearing 1 2 8P-7002 8P-7002

Shaft 1 6T-2620 6T-2620

Retainer 2 6T-2619 6T-2619

Thrust Washer 1 137-9518 137-9518

Bolt 12 053-2294 2 053-2294 3

Washer 12 5M-2894 5M-2894

Stabilizer Ring 2 7T-4030 7T-4030

Seal -- Duo-Cone Group 2 7T-4080 7T-4080

Toric Ring 1 1 8P-7003 8P-7003

O-Ring 1 1 6V-2699 6V-2699


Stopper 1 3T-9536 3T-9536

Plug 1 6Y-0473 6Y-0473

Mounting Hardware (D5M XL) 4

End Cap 2 108-1138 108-1138

Block 2 108-1136 108-1136

Bolt (16 mm) 4 8T-0282 8T-0282

Washer 4 5P-8247 5P-8247


Mounting Hardware (D4H, D4H XL) 4

End Cap 2 9N-4683 9N-4683

Block 2 9N-4680 9N-4680

Bolt (5/8") 4 1A-8651 1A-8651

Washer 4 5P-8247 5P-8247


Special Application Seals


Toric Ring 1 1 7T-4087 7T-4087

O-Ring 1 1 6V-2699 6V-2699

1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 Use 0S-1594 bolt with former idler assembly 6T-26153 Use 0S-1594 bolt with former idler assembly 7T-4399.4 These components are not included in the idler group; quantities shown are required to mount each idler.

17


D5M LGP, D5M XL, D4H, D4H LGP, D4H XL, 561H IDLERSFORMER DESIGN, LARGE TREAD DIAMETER


NUMBER

Idler Group 4 --

Components of Group


Bearing 1 2 8P-7002

Shaft 1 6T-2620

Retainer 2 6T-2619


Bolt 12 053-2294 2

Washer 12 5M-2894

Stabilizer Ring 2 7T-4030

Seal -- Duo-Cone Group 2 7T-4080

Toric Ring 1 1 8P-7003

O-Ring 1 1 6V-2699


Stopper 1 3T-9536

Plug 1 6Y-0473

Mounting Hardware (D5M LGP, D5M XL) 3

End Cap 2 108-1138

Block 2 108-1136

Bolt (16 mm) 4 8T-0282

Washer 4 5P-8247


Mounting Hardware (D4H, D4H LGP, D4H XL, 561H) 3

End Cap 2 9N-4683

Block 2 9N-4680

Bolt (5/8") 4 1A-8651

Washer 4 5P-8247




Toric Ring 1 1 7T-4087

O-Ring 1 1 6V-2699

1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 Use 0S-1594 bolt with former idler assembly 6T-2615.3 These components are not included in the idler group; quantities shown are required to mount each idler.

D5N, D5M, D4H SystemOne CARRIER ROLLERS


NUMBER

Carrier Roller Group 2 227-5971

18


D5N, D5M, D4H, 561N, 561M, 561H CARRIER ROLLERS


NUMBER

Group 2 6K-9880

Components of Group

Roller Shell 1 9W-6174

Shaft 1 6K-9861

Plate 1 6K-9860

Bolt 2 6V-4791

Cup 2 1M-8736

Cone 2 1M-8735

Ring 1 1M-7914

Cover 1 3K-6638

Collar Assembly 1 1M-7918

Plug 1 2P-0347

Bolt 3 0L-1351

Seal -- Duo-Cone Group 1 9W-5224

Toric Ring 1 2 1M-3097

Seal -- Cover 1 5H-8848

Seal -- Plug 1 1S-8947

Seal -- Shaft O-Ring 1 1H-9696


Seal -- Duo-Cone Group 1 5K-6191

Toric Ring 1 2 2S-2181

1 Component of preceding group; quantity shown is the quantity per group.

D5N, D5M SystemOne TRACK ROLLERS


NUMBER

Single Flange (SF) Roller Group - 1 240-8933

Mounting Hardware 2

Cap 3 2 218-4993

Bolt (16 mm) 4 8T-0281

Washer 4 9X-8268

1 14 required for XL machines; 16 required for LGP machines.2 These components are not included in the roller group; quantities shown are required to mount each roller.3 Use special offset caps 262-7193 and 262-7194 at roller positions 2 and 7 on LGP machines (3CR1232 and Up, 3DR0464 and Up, 6AS0463and Up, 5FS0260 and Up, AKD0001 to AKD01361) with 8 roller frame configuration. These special offset caps repositions roller groups 2and 7 to provide the necessary clearance with roller groups 1 and 8.

19


D4H SystemOne TRACK ROLLERS


NUMBER

Single Flange (SF) Roller Group 14 240-8933

Mounting Hardware 1

Cap 2 218-4993

Bolt (5/8 Inch) 4 1B-4367

Washer 4 5P-8247

1 These components are not included in the roller group; quantities shown are required to mount each roller.

D5N, D5M, D4H, 561H TRACK ROLLERSCURRENT DESIGN (END COLLARS, SYMMETRIC SEALS), USE WITH 7 ROLLER FRAME CONFIGURATION


NUMBER

Double Flange (DF) Roller Group 6 124-8240


Double Flange (DF, Tall Flange) Roller Group - 1 124-8243

Components of Group

Roller Shell (DF) 1 124-8241

Roller Shell (SF) 1 124-8238

Roller Shell (DF, Tall Flange) 1 124-8244

Bushing Assembly 2 124-8248

Shaft 1 131-7239

Ring (Retaining-Snap) 2 6V-6768

Ring (Lock) 2 6H-7382

End Collar 2 132-1951

Seal -- Duo-Cone Group (Symmetrical) 2 9W-5224


Seal -- Bushing O-Ring 2 1H-8128

Seal -- Shaft O-Ring 2 7F-8267

Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware (D5M, D5N) 3

Bolt (16 mm) 4 8T-0357

Washer 4 5P-8247

Mounting Hardware (D4H, 561H) 3

Bolt (5/8") 4 1A-8537

Washer 4 5P-8247

Special Application Seals (Low/High Temperature)

Seal - Duo-Cone Group 2 5K-6191


1 Optional DF roller for guiding; use quantity required for specific roller frame type.2 Component of preceding assembly or group, quantity shown is quantity per assembly or group.3 These components are not included in the roller group; quantities shown are required to mount each roller.

20


D5N LGP, D5M LGP, 561N, 561M TRACK ROLLERSCURRENT DESIGN (END COLLARS, SYMMETRIC SEALS), USE WITH 8 ROLLER FRAME CONFIGURATION

3CR1232-UP, 3DR464-UP


NUMBER




Components of Group





Shaft 1 131-7239








Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 3

Bolt (16 mm) 4 8T-0357

Washer 4 5P-8247





21


D4H, 561H TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER), INCH MOUNTING HARDWARE


FORMERPART

NUMBER

Double Flange (DF) Roller Group 6 --

Single Flange (SF) Roller Group 8 --

Components of Group

Roller Shell (DF) 1 7G-4832

Roller Shell (SF) 1 7G-4833

Bearing 1 2 8P-7002

Shaft 1 8E-6573

Retainer Assembly 2 3T-9538 2

Thrust Washer 3 1 9G-9351

Dowel 3 4 1L-5072

Bolt 12 0S-1594

Washer 12 5M-2894


Seal -- Duo-Cone Group (Inverted) 2 7T-4080


O-Ring 1 1 6V-2699

Seal -- Retainer O-Ring 2 1H-6227

Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 4

End Cap 2 7G-4829

Bolt (5/8") 4 1B-4367

Washer 4 5P-8247




O-Ring 1 1 6V-2699

1 Component of preceding assembly or group, quantity shown is quantity per assembly or group.2 Service Replaced by 237-8201.3 These components are only to repair retainer assembly. See Special Instruction SEHS8515.4 These components are not included in the roller group; quantities shown are required to mount each roller.

22


D5N, D5M, XL/LGP SystemOne END GUIDING GUARDSMETRIC HARDWARE


NUMBER

Front

Guard Assembly (RH) 2 196-7111

Guard Assembly (LH) 2 196-7112

Wear Strip 4 271-6079

Bolt (12 mm) 12 8T-4956

Washer 12 8T-4223

Rear




Bolt (12 mm) 12 8T-4956

Washer 12 8T-4223

D4H XL/LGP SystemOne END GUIDING GUARDSLEVEL ONE GUIDING


NUMBER

Wear Strip 8 271-6079 1

Bolt (12 mm) 24 8T-4956

Washer 24 8T-4223

1 Support bar 9U-9244 required with this wear strip, weld support bar to end guide guard assembly, see Special Instructions REHS2570for directions.

D5N/M LGP, D5N/M XL END GUIDING GUARDSMETRIC HARDWARE (USE WITH D5M LGP 7 ROLLER FRAME CONFIGURATION)


NUMBER

Front

Guard Assembly 2 109-0058



Bolt (12 mm) 12 8T-4192

Washer 12 8T-4223

Rear




Bolt (12 mm) 12 8T-4192

Washer 12 8T-4223

23


D5N/M LGP END GUIDING GUARDSMETRIC HARDWARE (USE WITH 8 ROLLER FRAME CONFIGURATION)

3CR1232-UP, 3DR464-UP


NUMBER

Front




Bolt (12 mm) 12 8T-4192

Washer 12 8T-4223

Rear




Bolt (12 mm) 12 8T-4192

Washer 12 8T-4223

561N END GUIDING GUARDSMETRIC HARDWARE


NUMBER

Front




Bolt (12 mm) 12 8T-4192

Washer 12 8T-4223

Rear




Bolt (12 mm) 12 8T-4192

Washer 12 8T-4223

24


D4H, D4H LGP, D4H XL, 561H END GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)


NUMBER

Front



Bolt 12 5P-2228

Washer 12 8T-4223

Strip 4 9U-9198

Spacer 1 4 108-4250

Rear



Bolt 12 5P-2228

Washer 12 8T-4223

Strip 4 9U-9198

Spacer 4 108-4250

1 Required for Sealed and Lubricated Track.

D4H, D4H LGP, D4H XL, 561H END GUIDING GUARDSSEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)


NUMBER

Front

Guard Assembly 2 8E-9766


Bolt 12 5P-2228

Washer 12 8T-4223

Strip 4 9U-9198

Rear

Guard Assembly 2 6Y-9925


Bolt 12 5P-2228

Washer 12 8T-4223

Strip 4 9U-9198

25


D5N, D5M, D4H XL SystemOne TRACK ROLLER GUARDS (FULL LENGTH)LEVEL THREE GUIDING


NUMBER



Tube 8 205-6140

Bolt (16 mm) 8 110-6968

Washer 16 9X-8257

Nut 8 8T-4778

Bolt (16 mm) (D5N/M) (Guard Assembly to Track Roller Frame 28 8T-4140

Bolt (3/4 Inch) (D4H) (Guard Assembly to Track Roller Frame) 28 1A-8063

Spacer 28 204-6365

Bracket Assembly (RH) 2 248-3957

Bracket Assembly (LH) 2 248-3955

Bolt (12 mm) 8 8T-4956

Washer 8 7X-0550

D5N, D5M, D4H LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)LEVEL THREE GUIDING


NUMBER



Tube 10 205-6140

Bolt (16 mm) 10 110-6968

Washer 20 9X-8257

Nut 10 8T-4778

Bolt (16 mm) (D5N/M) (Guard Assembly to Track Roller Frame) 28 8T-4140

Bolt (3/4 Inch) (D4H) (Guard Assembly to Track Roller Frame) 28 1A-8063

Spacer 28 204-6365



Bolt (12 mm) 8 8T-4956

Washer 8 7X-0550

26


D5M XL TRACK ROLLER GUARDS (FULL LENGTH)METRIC MOUNTING HARDWARE


NUMBER



Spacer (Mounting) 28 8G-5258

Bolt - Mounting (16 mm) 28 8T-4140

Tube 8 8V-4772

Bolt - Cross-Tube (16 mm) 8 110-6968

Washer 16 9X-8257

Nut (16 mm) 8 8T-4778

Plate 2 108-4016

Plate 2 108-4017

Bolt (12 mm) 12 8T-4139

Washer 12 8T-4223

D5M LGP TRACK ROLLER GUARDS (FULL LENGTH)METRIC MOUNTING HARDWARE (USE WITH 7 ROLLER FRAME CONFIGURATION)


NUMBER





Tube 10 8V-4772


Washer 20 9X-8257

Nut (16 mm) 10 8T-4778

Plate 2 108-4016

Plate 2 108-4017

Bolt (12 mm) 12 8T-4139

Washer 12 8T-4223

27


D5M LGP TRACK ROLLER GUARDS (FULL LENGTH)METRIC MOUNTING HARDWARE (USE WITH 8 ROLLER FRAME CONFIGURATION)

3CR1232-UP, 3DR464-UP


NUMBER



Spacer (Mounting) 28 204-6365


Tube 10 8V-4772


Washer 20 9X-8257

Nut (16 mm) 10 8T-4778

Plate 4 183-8468

Bolt (12 mm front) 4 8T-4956

Bolt (12 mm front) 4 8T-4183

Bolt (12 mm rear) 4 8T-4139

Washer 12 8T-4223

561N TRACK ROLLER GUARDS (FULL LENGTH)METRIC HARDWARE


NUMBER



Tube 10 205-6140

Bolt (16 mm) 10 110-6968

Washer 20 9X-8257

Nut 10 8T-4778

Bolt (16 mm) 28 8T-4140

Spacer 28 204-6365



Bolt (12 mm) 8 8T-4956

Washer 8 7X-0550

Bolt (Rear) (12 mm) 4 8T-4194

Washer 4 7X-0550

28


D4H XL TRACK ROLLER GUARDS (FULL LENGTH)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)


NUMBER



Tube 8 8V-4772

Bolt 8 5P-4625

Bolt 28 8T-8924

Bolt 12 8T-8917

Washer 12 8T-4223

Washer 16 8T-4122

Nut 8 3K-2889

Plate 2 108-4016

Plate 2 108-4017

Spacer 28 6K-5640

D4H LGP TRACK ROLLER GUARDS (FULL LENGTH)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)


NUMBER



Tube 10 8V-4772

Bolt 10 5P-4625

Bolt 36 8T-8924

Bolt 12 8T-8917

Washer 12 8T-4223

Washer 20 8T-4122

Nut 10 3K-2889

Plate 2 108-4016

Plate 2 108-4017

Spacer 36 6K-5640

29


D4H TRACK ROLLER GUARDS (FULL LENGTH)SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)


NUMBER



Tube 4 8V-4772

Bolt 4 5P-4625

Bolt 28 8T-8924

Bolt 16 8T-8917

Washer 16 8T-4223

Washer 8 8T-4122

Washer 4 3K-2889

Plate 4 8Y-0356

Spacer 28 6K-5640

D4H LGP TRACK ROLLER GUARDS (FULL LENGTH)SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)


NUMBER



Tube 10 8V-4772

Bolt 10 5P-4625

Bolt 40 8T-8924

Bolt 16 8T-8917

Washer 16 8T-4223

Washer 20 8T-4122

Washer 10 3K-2889

Plate 4 8Y-0356

Spacer 40 6K-5640

D5N/M,XL SystemOne CENTER GUIDING GUARDSLEVEL TWO GUIDING, GUARD ASSEMBLY POSITIONED OVER #2 AND #5 ROLLER GROUPS

METRIC HARDWARE


NUMBER

Guard Assembly (Roller #2) 2 251-8580

Guard Assembly (Roller #5) 2 251-8578

Bolt (16 mm) 16 8T-4140

Spacer 16 204-6365

30


D4H XL SystemOne CENTER GUIDING GUARDSLEVEL TWO GUIDING, GUARD ASSEMBLY POSITIONED OVER #2 AND #5 ROLLER GROUP

INCH HARDWARE


NUMBER


Bolt (3/4 Inch) 16 1A-8063

Spacer 16 204-6365

D5N, D5M, LGP SystemOne CENTER GUIDING GUARDSLEVEL ONE GUIDING, GUARD ASSEMBLY POSITIONED OVER #4 ROLLER GROUP

METRIC HARDWARE


NUMBER


Bolt (16 mm) 8 8T-4140

Spacer 8 204-6365

D5N/M,LGP SystemOne CENTER GUIDING GUARDSLEVEL TWO GUIDING, GUARD ASSEMBLY POSITIONED OVER #3 AND #6 ROLLER GROUPS

METRIC HARDWARE


NUMBER


Bolt (16 mm) 16 8T-4140

Spacer 16 204-6365

D4H LGP SystemOne CENTER GUIDING GUARDSLEVEL ONE GUIDING, GUARD ASSEMBLY POSITIONED OVER #4 ROLLER GROUP

INCH HARDWARE

QUANTITYPART

NUMBER


Bolt (3/4 Inch) 8 1A-8063

Spacer 8 204-6365

31


D4H LGP SystemOne CENTER GUIDING GUARDSLEVEL TWO GUIDING, GUARD ASSEMBLY POSITION OVER #3 & #6 ROLLER GROUP

INCH HARDWARE


NUMBER


Bolt (3/4 Inch) 16 1A-8063

Spacer 16 204-6365

D5N LGP, D5N XL, 561N, 561M CENTER GUIDING GUARDSGUARD ASSEMBLY POSITIONED OVER #4 ROLLER GROUP


NUMBER


Bolt (16 mm) 8 8T-4140

Spacer 8 204-6365

561N CENTER GUIDING GUARDSGUARD ASSEMBLY POSITIONED OVER #3 AND #6 ROLLER GROUPS


NUMBER


Bolt (16 mm) 16 8T-4140

Spacer 16 204-6365

D5M LGP, D5M XL CENTER GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)


NUMBER


Bolt 8 8T-4140

Spacer 8 204-6365

D4H, D4H LGP, D4H XL, 561H CENTER GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)


NUMBER


Bolt 8 8T-8924

Spacer 8 6K-5640

32


D4H, D4H LGP, D4H XL CENTER GUIDING GUARDSSEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)


NUMBER


Bolt 4 5P-4625

Bolt 8 8T-8924

Bolt 16 7X-3328

Washer 8 8T-4122

Washer 16 8T-4223

Lock Nut 4 3K-2889

Tube 4 8V-4772

Bar 4 6Y-9935

Spacer 8 6K-5640

33

Elevated Sprocket TractorsD6N, D6M, D5H

D6N, D6M XL/LGP SystemOne™ TRACKPRESS FIT MASTER

D6N/M XL (40 SECTION): 2YS1-UP, 3WN1-UP, 4HS1-UP, 5WR1-UP, 6LR1-UP, AKM1-UP, CBL1-UP, CCK1-UP,ALH1-UP, CBF1-UP,CBJ1-UP, JAH-UP, DJA1-UP,

D6N/M LGP (46 SECTION): 2RN1-UP, 4GS1-UP, 4JN1-UP, 5NR1-UP, ALR1-UP, CCG1-UP, ALY1-UP, CCS1-UP,DJY1-UP

7.50" (190.5 mm) PITCH -- 20 mm BOLT

PARTNUMBER

XL40 Section

LGP46 Section

FINEGRADER

47 Section

Link Assembly (Quantity 2) 235-2511 1 351-0961 351-0962


Link Box Standard 2 351-0959 20 23 22

Link Box Offset 3 351-0960 -- -- 1

Standard Link 235-2501 38 44 44

Standard Link (Press Fit) 4 235-2501 2 2 2

Track Hardware 4

Bolt (M20) 6Y-0846 160 184 188

Nut 9W-3361 160 184 188

1 Contains Standard Link Box 235-2509.2 Link Box Standard that is greater than 40% worn should be replaced with part number 264-9764.3 Link Box Offset that is greater than 40% worn should be replaced with part number 339-0265.4 Not part of link assembly; required to assemble track group.

D6N, D6M XL/LGP SystemOne™ TRACK (Clamp Master)CLAMP MASTER

D6N/M XL (40 SECTION): 2YS1-UP, 3WN1-UP, 4HS1-UP, 5WR1-UP, 6LR1-UP, AKM1-UP, CBL1-UP, CCK1-UP,ALH1-UP, CBF1-UP,CBJ1-UP, JAH1-UP, DJA1-UP

D6N/M LGP (46 SECTION): 2RN1-UP, 4GS1-UP, 4JN1-UP, 5NR1-UP, ALR1-UP, CCG1-UP, ALY1-UP, CCS1-UP,DJY1-UP

7.50" (190.5 mm) PITCH -- 20 mm BOLT

PARTNUMBER

XL40 Section

LGP46 Section

FINEGRADER

47 Section

Link Assembly (Quantity 2) 235-2511 1 351-0961 351-0962


Link Box Standard 2 351-0959 20 23 22

Link Box Offset 3 351-0960 -- -- 1

Standard Link 235-2501 38 44 44

Clamp Master Link 4 318-2375 2 2 2

Track Hardware 4

Bolt (M20) 6Y-0846 160 180 184

Nut 9W-3361 160 180 184

Track Bolt Master (M20) 254-0225 4 4 4


34


D5H XL/LGP SYSTEM ONE TRACKPRESS FIT MASTER

D5H XL (39 SECTION): 8RJ1-UPD5H LGP (46 SECTION):1DD4000-UP, 4KD4000-UP, 9HC4000-UP, 2SD4000-UP

7.50" (190.5 mm) PITCH -- 20 mm BOLT

PARTNUMBER

XL39 Section

LGP46 Section

Link Assembly (Quantity 2) 246-5753 1 351-0961


Link Box Standard 2 351-0959 18 23

Link Box Offset 3 351-0960 1 --


Standard Link (Press Fit) 4 235-2501 2 2

Track Hardware 4

Bolt (M20) 6Y-0846 156 184

Nut 9W-3361 156 184


D5H XL/LGP SYSTEM ONE TRACKCLAMP MASTER

D5H XL (39 SECTION): 8RJ1-UPD5H LGP (46 SECTION):1DD4000-UP, 4KD4000-UP, 9HC4000-UP, 2SD4000-UP

7.50" (190.5 mm) PITCH -- 20 mm BOLT

PARTNUMBER

XL39 Section

LGP46 Section

Link Assembly 246-5753 1 351-0961


Link Box Standard 2 351-0959 18 23

Link Box Offset 3 351-0960 1 --


Clamp Master Link 4 318-2375 2 2

Track Hardware 4

Bolt (M20) 6Y-0846 152 180

Nut 9W-3361 152 180

Track Bolt Master (M20) 254-0225 4 4


35


D6N, D6M, D5H HEAVY DUTY SEALED AND LUBRICATED TRACK 1

D6N/M XL (40 SECTION): 2YS1-UP, 3WN1-UP, 4HS1-UP, 5WR1-UP, 6LR1-UP, AKM1-UP, CBL1-UP, CCK1-UP,ALH1-UP, CBF1-UP,CBJ1-UP, GHS1-UP, MLW1-UP

D6N/M LGP, D5H LGP (46 SECTION): 1DD5879-UP, 2RN1-UP, 2SD5552-UP, 4GS1-UP, 4JN1-UP, 4KD5588-UP,5NR1-UP, 9HC5520-UP, ALR1-UP, CCG1-UP, ALY1-UP, CCS1-UP

D6M, D5H FINE GRADER (47 SECTION):1DD, 9HC7.50" (190.5 mm) PITCH - 3/4" BOLT

PARTNUMBER

XL40 Section

LGP46 Section

FINEGRADER

47 Section

Link Assembly -- 47 Section 110-2976 106-1636 106-1634

Track Links





RH Regular 106-1625 39 45 46

LH Regular 106-1626 39 45 46

Other Components

Pin 179-0126 40 46 47

Bushing 106-1618 40 46 47


Thrust Ring 152-8070 80 92 94

Stopper 5G-2247 40 46 47

Plug 6Y-0473 40 46 47

Track Hardware 2

Bolt (Gouser Shoe) 6V-1792 156 180 184

Bolt (Self-Cleaning Shoe) 6V-1792 -- 90 92

Bolt (Self- Cleaning Shoe) 107-0718 -- 90 92

Nut 1S-1860 156 180 184

Master Bolt (Grouser Shoe) 107-0719 2 2 2

Master Bolt (Grouser Shoe) 106-1642 2 2 2

Master Bolt (Self-Cleaning Shoe) 107-0719 -- 2 2

Master Bolt (Self-Cleaning Shoe) 107-0717 -- 2 2

Special Sets/Groups



1 When installing Heavy Duty Track on existing machines, refer to IRMs UC93-21 and UC 94-17. Master shoe required with heavy dutytrack. Aslo refer to Special Instructions SEHS9797 and SEHS9585 for additional guarding and track shoe rework options.2 Not part of link assembly; required to assemble track group.

D6N XL, D6M XL MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIES

QUANTITYPART

NUMBER



36


D6N LGP, D6M LGP MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIES

QUANTITYPART

NUMBER



Extreme Service Shoe -- 34" (865 mm) 2 254-7199

D5H STD/XL HEAVY DUTY SEALED AND LUBRICATED TRACK 1

D5H STD (37 SECTION): 1YD5522-UP, 3MD5598-UP, 7NC5525-UP, 8RC5890-UPD5H XL (39 SECTION): 8RJ4217-UP7.50" (190.5 mm) PITCH - 3/4" BOLT

PARTNUMBER

STD37 Section

XL39 Section

Link Assembly (Quantity 2) 106-1635 106-1637

Track Links

RH Pin End Master 106-1627 1 1

LH Pin End Master 106-1628 1 1

RH Bushing End Master 106-1629 1 1

LH Bushing End Master 106-1630 1 1

RH Regular 106-1625 36 38

LH Regular 106-1626 36 38

Other Components

Pin 179-0126 37 39

Bushing 106-1618 37 39

Seal Assembly (Rigid) 250-3988 74 78

Thrust Ring 152-8070 74 78

Stopper 5G-2247 37 39

Plug 6Y-0473 37 39

Track Hardware 2

Bolt 6V-1792 144 152

Nut 1S-1860 144 152

Master Bolt 107-0719 2 2


Special Sets/Groups

Seal Set (92 Seal Assemblies) 252-7855 1 1

Bushing and Seal Group (37 Sections) 115-2439 1 1

1 When installing Heavy Duty Track on existing machines, refer to IRMs UC93-21 and UC94-17. Master shoe required with heavy dutytrack. Also refer to Special Instructions SEHS9797 and SEHS9585 for additional guarding and track shoe rework options.2 Not part of link assembly; required to assemble track group.

37


D6N XL/LGP, D6M XL/LGP, D6M D5H FINE GRADER, ROTATING BUSHING TRACK 1

D6N/M XL (40 SECTION): 2YS1-UP, 3WN1-UP, 4HS1-UP, 5WR1-UP, 6LR1-UP, 9ZM1-UP, AKM1-UP, CBL1-UP,CCK1-UP, ALH1-UP, CBF1-UP, CBJ1-UP

D6N/M LGP (46 SECTION): 1DD5879-UP, 2RN1-UP, 2SD5552-UP, 4GS1-UP, 4JN1-UP, 4KD5588-UP, 5NR1-UP,9HC5520-UP, ALR1-UP, CCG1-UP, ALY1-UP, CCS1-UP

D6M D5H FINE GRADER (47 SECTION): 1DD, 9HC7.50" (190.5 mm) PITCH - 3/4" BOLT

PARTNUMBER

XL40 Section

LGP46 Section

FINE GRADER47 Section

Link Assembly -- 46 Section 152-8043 2 152-8041 3 152-8047 4

Track Links



RH Bushing End Master 5 165-1752 1 1 1

LH Bushing End Master 5 165-1753 1 1 1

RH Regular 5 165-1750 39 45 46

LH Regular 5 165-1751 39 45 46

Other Components

Pin 156-4701 40 46 47

Bushing 165-1768 40 46 47


Thrust Ring 152-8070 160 184 188

Stopper 5G-2247 40 46 47

Plug 6Y-0473 40 46 47

Track Hardware 6

Bolt 6V-1792 156 180 184

Nut 1S-1860 156 180 184

Master Bolt 106-1642 2 2 2

Master Bolt 107-0719 2 2 2

1 Rotating Bushing Track is an application specific undercarriage designed for high abrasion/low impact applications (4,000 hour systemlife or less). When installing Rotating Bushing Track on existing machines, refer to IRM UC95-13 for installation and guardinginformation. Also refer to Special Instruction SEHS9797 for additional guarding information and SEHS9725 for shoe rework options. Forservicing information refer to Special Instruction SEHS9542. Master shoe required with Rotating Bushing Track.2 Serviced replaced by 110-2976 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.3 Serviced replaced by 106-1636 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.4 Serviced replaced by 106-1634 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.5 Joint assemblies (includes link and insert). Insert not serviced.6 Not part of link assembly; required to assemble track group

38


D5H STD/XL ROTATING BUSHING TRACK 1

D5H STD (37 SECTION): 1YD5522-UP, 3MD5598-UP, 7NC5525-UP, 8RC5890-UPD5H XL (39 SECTION): 8RJ4217-UP7.50" (190.5 mm) PITCH - 3/4" BOLT

PARTNUMBER

STD37 Section

XL39 Section

Link Assembly (Quantity 2) 152-8044 2 152-8045 3

Track Links



RH Bushing End Master 4 165-1752 1 1

LH Bushing End Master 4 165-1753 1 1

RH Regular 4 165-1750 36 38

LH Regular 4 165-1751 36 38

Other Components

Pin 156-4701 37 39

Bushing 165-1768 37 39


Thrust Ring 152-8070 148 156

Stopper 5G-2247 37 39

Plug 6Y-0473 37 39

Track Hardware 5

Bolt 6V-1792 144 152

Nut 1S-1860 144 152



1 Rotating Bushing Track is an application specific undercarriage designed for high abrasion/low impact applications (4,000 hour systemlife or less). When installing Rotating Bushing Track on existing machines, refer to IRM UC95-13 for installation and guardinginformation. Also refer to Special Instruction SEHS9797 for additional guarding information and SEHS9725 for shoe rework options. Forservicing information refer to Special Instruction SEHS9542. Master shoe required with Rotating Bushing Track.2 Serviced replaced by 106-1635 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.3 Serviced replaced by 106-1637 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.4 Joint assemblies (includes link and insert). Insert not serviced.5 Not part of link assembly; required to assemble track group

39


D5H STD/XL/LGP/FINE GRADER HYBRID TRACKD5H STD (35 SECTION):1YD1-5521, 3MD1-5597, 7NC1-5524, 8RC1-5889

D5H XL (39 SECTION):8RJ1-4216D5H LGP (46 SECTION):1DD1-5878, 2SD1-5551, 4KD1-5588, 9HC1-5519

D5H FINE GRADER (47 SECTION):1DD, 9HC7.50" (190.5 mm) PITCH -- 5/8" BOLT

PARTNUMBER

STD37 Section

XL39 Section

LGP46 Section

Fine Grader47 Section

Link Assembly -- (Quantity 2) 230-7272 238-6928 238-6930 238-6931

Track Links

RH Pin End Master 244-6571 1 1 1 1

LH Pin End Master 244-6572 1 1 1 1

RH Bushing End Master 244-6573 1 1 1 1

LH Bushing End Master 244-6574 1 1 1 1

RH Regular 229-6909 36 38 45 46

LH Regular 229-6910 36 38 45 46

Other Components

Pin 160-7818 1 37 39 46 47

Bushing 229-6915 37 39 46 47

Seal Assembly (Rigid) 250-3988 74 78 92 94

Thrust Ring 6Y-6481 74 78 92 94

Stopper 5G-2247 37 39 46 47

Plug 6Y-0473 37 39 46 47

Track Hardware 2

Bolt (Grouser Shoes) 9G-3110 144 152 180 184

Bolt (Self Cleaning Shoe) 9G-3110 -- -- 90 --

Bolt (Self Cleaning Shoe) 3T-3884 -- -- 90 --

Nut 1M-1408 144 152 180 184

Master Bolt 3T-8580 2 2 2 2


Master Bolt (Self-Cleaning Shoe) 3T-8580 -- -- 2 --


Special Sets/Groups

Seal Set (92 Seal Assemblies) 252-7855 1 1 1 1

Bushing and Seal Group (37 Sections) 293-9146 1 1 1 1

1 Former pin 3P-3880 (Use 9G-1642 stopper).2 Not part of link assembly; required to assemble track group.

40


D5H STD/XL/LGP/FINE GRADER SEALED AND LUBRICATED TRACKRIGID SEAL ASSEMBLY

D5H STD (35 SECTION):1YD1-5521, 3MD1-5597, 7NC1-5524, 8RC1-5889D5H XL (39 SECTION):8RJ1-4216

D5H LGP (46 SECTION):1DD1-5878, 2SD1-5551, 4KD1-5588, 9HC1-5519D5H FINE GRADER (47 SECTION):1DD, 9HC

7.50" (190.5 mm) PITCH -- 5/8" BOLT

PARTNUMBER

STD37 Section

XL39 Section

LGP46 Section

Fine Grader47 Section

Link Assembly -- (Quantity 2) 6Y-5412 1 8E-9820 2 6Y-5414 3 8E-4160 4

Track Links

RH Pin End Master 8E-0885 1 1 1 1

LH Pin End Master 8E-0886 1 1 1 1

RH Bushing End Master 8E-0887 1 1 1 1

LH Bushing End Master 8E-0888 1 1 1 1

RH Regular 6Y-9267 36 38 45 46

LH Regular 6Y-9268 36 38 45 46

Other Components

Pin 160-7818 5 37 39 46 47

Bushing 6Y-0929 37 39 46 47


Thrust Ring 6Y-6481 74 78 92 94

Stopper 5G-2247 37 39 46 47

Plug 6Y-0473 37 39 46 47

Track Hardware 6

Bolt (Grouser Shoes) 9G-3110 144 152 180 184

Bolt (Self Cleaning Shoe) 9G-3110 -- -- 90 --

Bolt (Self Cleaning Shoe) 3T-3884 -- -- 90 --

Nut 1M-1408 144 152 180 184





Special Sets/Groups


Bushing and Seal Group (37 Sections) 6Y-5405 1 1 1 1

1 Serviced replaced by 230-7272 hybrid link assembly.2 Serviced replaced by 238-6928 hybrid link assembly.3 Serviced replaced by 238-6930 hybrid link assembly.4 Serviced replaced by 238-6931 hybrid link assembly.5 Former pin 3P-3880 (Use 9G-1642 stopper).6 Not part of link assembly; required to assemble track group.

41


D5H STD/XL/LGP SEALED AND LUBRICATEDCRESCENT SEAL ASSEMBLY

D5H STD (35 SECTION):1YD1-5521, 3MD1-5597, 7NC1-5524, 8RC1-5889D5H XL (39 SECTION):8RJ1-4216

D5H LGP (46 SECTION):1DD1-5878, 2SD1-5551, 4KD1-5588, 9HC1-55197.50" (190.5 mm) PITCH -- 5/8" BOLT

QUANTITYPART

NUMBER


Track Links

RH Regular 36 3T-8405

LH Regular 36 3T-8406

Other Components

Pin 37 160-7818 2

Bushing 37 6Y-0929

Seal Assembly (Crescent) 74 3T-5631 3

Thrust Ring 74 9G-3106

Stopper 37 5G-2247

Plug 37 6Y-0473

Track Hardware 4

Bolt (Grouser Shoes) 144 9G-3110

Bolt (Self Cleaning Shoe) (LGP, 46 Section) 90 9G-3110

Bolt (Self Cleaning Shoe) (LGP. 46 Section) 90 3T-3884

Nut 144 1M-1408



Master Bolt (Self-Cleaning Shoe) (LGP 46 Section) 2 3T-8580

Master Bolt (Self-Cleaning Shoe) (LGP 46 Section) 2 3T-3889

1 If 37, 39, 46, section link assemblies are required upgrade to sealed and lubricated track with rigid seals.2 Former pin 3P-3880 (Use 9G-1642 stopper).3 Serviced Replaced By: 288-8173.4 Not part of link assembly; required to assemble track group.

42


D6N LGP, D6M LGP, D5H LGP HEAVY DUTY TRI/QUAD TRACK 1

7.50" (190.5 mm) PITCH -- 3/4" BOLT

QUAD TRACKQUANTITY

TRI TRACKQUANTITY

PARTNUMBER


Track Links

RH Pin End Master 1 1 3 106-1627

LH Pin End Master 1 1 4 106-1628

RH Bushing End Master 1 1 3 106-1629

LH Bushing End Master 1 1 4 106-1630

RH Regular 45 45 3 106-1625

LH Regular 45 45 4 106-1626

Other Components

Stub Pin 92 46 106-1610


Bolt 360 270 6V-1792

Nut 360 270 1S-1860

Master Bolt 4 3 106-1642


1 When installing Heavy Duty Track on existing machines, refer to Special Instruction SEHS9797 for additional guarding information andSEHS9725 for shoe rework options. For more information about quad and tri link track, refer to IRM UC91-18 and special instructionSEHS8881. Master shoe required with heavy duty track.2 Refer to Heavy Duty Track section for component information.3 Required for right hand outrigger chain.4 Required for left hand outrigger chain.5 Not part of link assembly; required to assemble track group.

D6N, D6M, D5H SystemOne TRACK SHOES7.50" (190.5 mm) PITCH - 20 mm BOLT


MASTERSHOE PART

NUMBER




Moderate Service 33.0" (840 mm) 267-8910 --





Extreme Service (Center Hole) 24.0" (610 mm) 289-5210 --

Extreme Service 28.0" (710 mm) 293-9077 --


Extreme Service (Center Hole) 33.0" (840 mm) 274-7839 313-4543


Self Cleaning 34.0" (865 mm) 241-7871 --

43


D6N, D6M, D5H TRACK SHOES 1

HEAVY DUTY AND RBT SEALED AND LUBRICATED TRACK7.50" (190.5 mm) PITCH -- 3/4" BOLT

TYPE WIDTH

REGULARSHOE PART

NUMBER

MASTERSHOE PART

NUMBER STD XR XL LGP

Extreme Service 20.0" (510 mm) 106-1608 106-1617 Y Y Y N

Extreme Service 22.0" (560 mm) 107-0713 107-0714 N Y Y Y

Extreme Service 23.6" (600 mm) 132-1334 132-1336 N Y Y Y

Extreme Service 34.0" (860 mm) 222-1796 222-1797 N N N Y

Moderate Service 18.0" (460 mm) 106-1603 106-1611 Y Y Y N

Moderate Service 20.0" (510 mm) 106-1604 106-1612 Y Y Y N

Moderate Service 22.0" (560 mm) 106-1607 106-1613 N Y Y N

Moderate Service 24.0" (610 mm) 117-0615 117-0616 N Y Y Y

Moderate Service 28.0" (710 mm) 106-1602 106-1615 N N N Y


Self-Cleaning 34.0" (865 mm) 107-0715 107-0716 N N N Y

Moderate Service (Tri) (RH) 26.0" (660 mm) 148-2487 148-2594 N N N Y

Moderate Service (Tri) (LH) 26.0" (660 mm) 148-2494 148-2596 N N N Y

Moderate Service (Tri) (RH) (Clipped Grouser) 30.0" (760 mm) 163-2922 163-2923 N N N Y

Moderate Service (Tri) (LH) (Clipped Grouser) 30.0" (760 mm) 163-2924 163-2925 N N N Y

Quad (MS) 26.0" (660 mm) 115-3328 115-3329 N N Y Y

Quad (MS) 32.0" (810 mm) 115-3330 115-3331 N N Y Y

1 Heavy Duty Sealed & Lubricated Track has a different bolt pattern and bolt size than conventional Sealed & Lubricated Track. Aprocedure exists to rework Sealed & Lubricated Track shoes for use on Heavy Duty Track; refer to Special Instruction SEHS9725.

D5H TRACK SHOESHYBRID AND SEALED AND LUBRICATED TRACK

7.50" (190.5 mm) PITCH -- 5/8" BOLT

TYPE WIDTH

REGULARSHOE PART


Extreme Service 20.0" (510 mm) 6Y-9416 Y Y Y N

Extreme Service 22.0" (560 mm) 8E-9827 N Y Y N

Extreme Service 24.0" (610 mm) 8E-9825 N Y Y Y

Moderate Service 16.0" (405 mm) 3T-8584 Y Y N N

Moderate Service 18.0" (460 mm) 3T-8597 Y Y N N

Moderate Service 20.0" (510 mm) 3T-8586 Y Y Y N



Moderate Service 28.0" (710 mm) 8E-4974 N N N Y

Moderate Service 34.0" (860 mm) 3T-8590 N N N Y

Self-Cleaning 34.0" (865 mm) 6T-0253 N N N Y

Quad (MS) 26.0" (660 mm) 9W-8191 N N Y Y

Quad (MS) 32.0" (810 mm) 9W-5187 N N Y Y

44


D6N, D6M SystemOne SPROCKETS


NUMBER


Bolt 25 6V-0937

Nut 25 7H-3607

Washer 25 2S-5658

D6N, D6M SPROCKETSHEAVY DUTY, RBT, AND SEAL AND LUBRICATED TRACK


NUMBER

Sprocket Segment (5 Tooth) 5 6I-8077

Bolt 25 6V-0937

Nut 25 7H-3607

Washer 25 2S-5658

D5H SPROCKETSHEAVY DUTY, RBT, SystemOne, HYBRID, AND SEALED AND LUBRICATED TRACK


NUMBER



Bolt 23 6V-0937

Nut 23 7H-3607

Washer 23 2S-5658

45


D6N, D6M, D5H SystemOne CENTER TREAD IDLERXL, LGP


NUMBER

Group 4 290-0737

Components of Group


Bearing 1 2 9P-1360

Shaft 1 161-7350

Collar 2 160-9756

Retainer 2 161-7550

Thrust Washer 2 1 110-3362

Bolt 12 9X-8271

Washer 12 9X-2327


Toric Ring 1 2 161-7249



Stopper 1 3T-9536

Plug 1 6Y-0473

1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 Use (1) 9G-9351 Thrust Washer and (4) 1L-5072 Dowels to repair former 6T-3283 Retainer Assembly. Use (1) 9W-2423 Thrust Washerand (4) 2H-1190 Dowels to repair former 9G-9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 110-3362 and 106-7691 ThrustWasher. See Special Instruction SEHS8515.

46


D6N, D6M, D5H SystemOne RELIEVED TREAD IDLERXL, LGP

GHS, MLW

QUANTITYPART

NUMBER

Group 4 323-1168

Components of Group


Bearing 1 2 9P-1360

Shaft 1 161-7350

Collar 2 160-9756

Retainer 2 161-7550


Bolt 12 9X-8271

Washer 12 9X-2327


Toric Ring 1 2 161-7249



Stopper 1 3T-9536

Plug 1 6Y-0473

1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 Use (1) 9G-9351 Thrust Washer and (4) 1L-5072 Dowels to repair former 6T-3283 Retainer Assembly. Use (1) 9W-2423 Thrust Washerand (4) 2H-1190 Dowels to repair former 9G-9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 110-3362 and 106-7691 ThrustWasher. See Special Instruction SEHS8515.

47


D6N, D6M, D5H IDLERSCURRENT DESIGN - SYMMETRIC SEALS (STD, XL, LGP)



NUMBER

Group 4 190-1546

Components of Group


Bearing 1 2 9P-1360

Shaft 1 161-7350

Collar 2 160-9756

Retainer 2 161-7550


Bolt 12 053-2294

Washer 12 5M-2894


Toric Ring 1 2 161-7249



Stopper 1 3T-9536

Plug 1 6Y-0473

Mounting Hardware (D6N, D6M) (End Cap and Block with Bolt Hole Centerline 88 mm)

End Cap (Front & Rear LH) 1 233-0372

End Cap (Front & Rear RH) 1 233-0368

Block (Front LH) 1 254-3928

Block (Front RH) 1 254-3927

Block (Rear LH) 1 239-8091


Bolt (Front) (16 mm) 4 8T-0359

Bolt (Rear) (16 mm) 4 8T-0282

Washer 4 5P-8247

Shim (Front Idlers Only) 4 254-3929

Mounting Hardware (D6N, D6M) (End Cap and Block with Bolt Hole Centerline 75 mm) 3

End Cap 2 108-1138

Block 2 108-1136

Bolt (16 mm) 4 8T-0282

Washer 4 5P-8247


Mounting Hardware (D5H) (End Cap and Block with Bolt Hole Centerline 75 mm) 3

End Cap 2 9N-4683

Block 2 9N-4680

Bolt (5/8") 4 1A-8651

Washer 4 5P-8247


1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 Use (1) 9G-9351 Thrust Washer and (4) 1L-5072 Dowels to repair former 6T-3283 Retainer Assembly. Use (1) 9W-2423 Thrust Washerand (4) 2H-1190 Dowels to repair former 9G-9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 110-3362 and 106-7691 ThrustWasher. See Special Instruction SEHS8515.3 These components are not included in the idler group; quantities shown are required to mount each idler.

48


D6N, D6M XL, LGP SystemOne CENTER TREAD IDLER HARDWAREFACTORY BUILT MACHINES


NUMBER




Block (Rear RH) 2 283-5748

End Cap (Abutment Style) (Front LH) 2 233-0372

End Cap (Abutment Style) (Front RH) 2 233-0368

End Cap (Abutment Style) (Rear LH) 2 283-5750

End Cap (Abutment Style) (Rear RH) 2 283-5746

Shim - Front (10 mm Thick) 4 254-3929

Shim - Rear (5 mm Thick) 4 283-5753

Bolt-Rear (16mm x 135mm) 8 146-5132

Bolt-Front (16mm x 130mm) 8 8T-0359

Washer (16mm) 16 5P-8247

Plate (Bolt to Front and Rear Yoke Assemblies) 8 248-3971

Scraper 8 248-3972

Bolt (12 mm) 8 8T-4910

Bolt (12 mm) 24 8T-4183

Washer (12 mm) 32 7D-1649

Scraper (Bolt to End Guiding Guard) 8 271-6093

Bolt (12mm) 24 8T-4194

Washer (12mm) 24 198-4778

49


D6N, D6M, D5H, XL/LGP SystemOne CENTER TREAD IDLER HARDWARE ARRANGEMENTRETROFIT KIT


NUMBER

Hardware Idler Arrangement (Includes hardware for 4 idler groups) 1 246-5714 1












Bolt-Rear (16mm x 135mm) (D6N, D6M) 8 146-5132

Bolt-Front (16mm x 130mm) (D6N, D6M) 8 8T-0359

Bolt (5/8" x 135mm) (D5H) 16 7X-0357 2

Washer (16mm) 16 5P-8247

Plate (Weld to End Guiding Guards) 8 271-6094

Scraper 8 271-6095

Bolt (12 mm) 24 8T-4956

Washer (12 mm) 24 5P-1076

Plate- Scraper Base (Front Track Roller Frame) 2 234-4319

Plate- Scraper Base (Rear Track Roller Frame) 2 246-4341

Side Scraper 8 238-0452

Tread Scraper-Front 2 238-0453


Scraper Washer (12mm) 28 5P-1076

1 This arrangement contains all the components needed to provide proper guarding on D6N/M SystemOne Center Tread Idler Groups.This arrangement can also be used on D5H machines and the only difference is the bolts (5/8") to mount the cap assembly and blocks tothe track roller frame. These bolt are not included in the arrangement and must be ordered separately.2 Not included in Hardware Idler Arrangement.

50


D6N (XL& LGP) SYSTEMONE RELIEVED TREAD IDLER MOUNTING HARDWARE –RETROFIT

XL & LGPD6N XL: ALH1-UP, AKM1-UP D6N XL III: DJA1-UP D6N LGP: ALY1-UP, ALR1-UP D6N LGP III: DJY1-UP

QUANTITYPART

NUMBER

Components of Idler Hardware Arrangement 1






Bolt-Front (16mm x 140mm) (D6N, D6M) 8 9X-8916






Bolt-Rear (16mm x 140mm) (D6N, D6M) 8 9X-8916

Washer (16mm) 16 5P-8247

1 Components include the caps/blocks and hardware to mount idlers. The scrapers and guards will need to be modified. Please refer toREHS5304.

51


6N (LGP FINE GRADER) SYSTEMONE RELIEVED TREAD IDLER MOUNTING HARDWARE –RETROFIT

LGP Fine GraderD6N LGP Fine Grader: ALY2454-UP, ALR0785-UP D6N LGP III Fine Grader: DJY1-UP

QUANTITYPART

NUMBER

Components of Idler Hardware Arrangement 1

Front Extension Block As. 4 339-2908


Long, Middle Bolt (16 mm x 190 mm) 4 7Y-5227

Short, Rear Bolt (16 mm x 90 mm) 4 8T-4175

Intermediate, Front Bolt (16 mm x 130 mm) 4 8T-0359

Washer (16 mm) 8 9X-8268

Cap As. Front 4 108-1138

Block (Front) 4 110-6124





Bolt-Rear (16mm x 140mm) (D6N, D6M) 8 9X-8916


Washer (16mm) 16 5P-8247

1 Components include the caps/blocks and hardware to mount idlers. The scrapers and guards will need to be modified. Please refer toREHS5304.

52


D6M, D5H IDLERSFORMER DESIGN (STD, XL, LGP)


NUMBER

Group 4 --

Components of Group


Bearing 1 2 9P-1360

Shaft 1 6T-3285

Retainer 2 6T-3284


Bolt 12 053-2294 3

Washer 12 5M-2894




O-Ring 1 1 6V-2699


Stopper 1 3T-9536

Plug 1 6Y-0473

Mounting Hardware (D5H) 4

End Cap 2 9N-4683

Block 2 9N-4680

Bolt 4 1A-8651

Washer 4 5P-8247


Mounting Hardware (D6M) 4

End Cap 2 108-1138

Block 2 108-1136

Bolt 4 8T-0282

Washer 4 5P-8247





O-Ring 1 1 6V-2699

1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 Use (1) 9G-9351 Thrust Washer and (4) 1L-5072 Dowels to repair former 6T-3283 Retainer Assembly. Use (1) 9W-2423 Thrust Washerand (4) 2H-1190 Dowels to repair former 9G-9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 110-3362 and 106-7691 ThrustWasher. See Special Instruction SEHS8515.3 Use 0S-1594 bolt with former idler assembly 6T-17634 These components are not included in the idler group; quantities shown are required to mount each idler.

D6N, D6M, D5H SystemOne CARRIER ROLLERS


NUMBER


53


D6N, D6M, D5H CARRIER ROLLERS


NUMBER

Group 2 6Y-3908

Roller Shell 1 5A-8375

Shaft 1 6Y-2043

Plate 1 8P-6188

Bolt 2 5K-9107

Cup 2 9S-3581

Cone 2 9S-3582

Ring 1 7H-4574

Cover 1 5M-2043

Collar Assembly 1 7H-4571

Plug 1 2P-0347

Bolt 3 0S-1594

Seal -- Duo-Cone Group 1 1M-8747

Toric Ring 1 2 8H-2262





Seal -- Duo-Cone Group 1 4S-8984



D6N, D6M SystemOne TRACK ROLLERS


NUMBER


Mounting Hardware (D6N, D6M) 2

Cap 2 223-9110

Bolt (16 mm) 4 8T-0281

Washer 4 5P-8247

1 14 required for XL machines; 16 required for LGP machines.2 These components are not included in the roller group; quantities shown are required to mount each roller.

54


D5H XL/LGP SystemOne TRACK ROLLERS

(PER MACHINE)PART

NUMBER XL LGP

Single Flange (SF) Roller Group 240-9557 14 16

Mounting Hardware 1

Cap 223-9110 2 2

Cap - Offset 2 262-7248 2 --

Cap Offset 2 262-7249 2 --

Bolt (5/8") 1D-4585 4 4

Washer 9H-1024 4 4

1 These components are not included in the roller group; quantities shown are required to mount each roller.2 Use at roller position 1,2,6,7 to allow clearance between the roller groups.

55


D6N, D6M, D5H TRACK ROLLERSCURRENT DESIGN (END COLLARS, SYMMETRIC SEALS)


NUMBER

Roller Group (DF) / Machine 6 1 121-0827 2

Roller Group (SF) / Machine 8 121-0824 3

Roller Group (DF, Tall Flange) - 4 121-0830 5

Components of Group

Roller Shell (DF) 1 121-0828 6

Roller Shell (SF) 1 121-0825 3

Roller Shell (DF, Tall Flange) 1 121-0831 5


Bearing 7 1 8P-6652

Shaft 1 131-8742 8

Ring (Retaining-Snap) 2 121-1257







Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware (D6N, D6M) 9

Bolt (16 mm) 4 6V-3303

Washer (16 mm) 4 5P-8247


Bolt (5/8") 4 0S-1625

Washer (5/8") 4 5P-8247

1 8 double flange rollers required for LGP machines.2 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric HardwareServiced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247.3 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric HardwareServiced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247.4 Optional double flange roller for guiding; use quantity required for specific roller frame type.5 Serviced Replaced By: 1 - Roller Group (DF) 310-4918, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247. Metric6 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric HardwareServiced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247.7 Component of preceding assembly or group; quantity shown is quantity per assembly or group.8 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric HardwareServiced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247 or Serviced ReplacedBy: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric Hardware Serviced Replaced By: 1 -Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247. or Serviced Replaced By: 1 - Roller Group (DF)310-4918, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247. Metric9 These components are not included in the roller group; quantities shown are required to mount each roller.

56


D5H TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER)


NUMBER

Double Flange (DF) 4 1 --

Single Flange (SF) 8 --

Components of Group

Roller Shell (DF) 1 9P-1362

Roller Shell (SF) 1 9P-1367

Bearing 2 2 9P-1360

Shaft 1 3T-9875

Retainer Assembly 2 3T-9877


Dowel 3 4 1L-5072

Bolt 12 0S-1594

Washer 12 5M-2894




O-Ring 2 1 6V-2699


Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 4

End Cap (5/8") 2 8E-0281

Bolt (5/8") 4 1B-4367

Washer (5/8") 4 5P-8247




O-Ring 2 1 6V-2699

1 8 double flange rollers required for LGP machines.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 These components are only to repair retainer assembly. See Special Instruction SEHS8515.4 These components are not included in the roller group; quantities shown are required to mount each roller.

57


D6N, D6M, XL/LGP SystemOne END GUIDING GUARDS


NUMBER

Front




Bolt (12 mm) 12 8T-4139

Washer 12 8T-4223

Rear




Bolt (12 mm) 12 8T-4139

Washer 12 8T-4223

D5H XL/LGP SystemOne END GUIDING GUARDSLevel One Guiding

(Per Machine) QUANTITYPART

NUMBER


Bolt (12 mm) 24 8T-4139

Washer 24 8T-4223

D6N/M LGP, D6N/M XL END GUIDING GUARDSMETRIC MOUNTING HARDWARE


NUMBER

Front




Bolt (12 mm) 12 8T-4192

Washer 12 8T-4223

Rear




Bolt (12 mm) 12 8T-4192

Washer 12 8T-4223

58


D5H, D5H LGP, D5H XL END GUIDING GUARDSSEALED AND LUBRICATED, HEAVY DUTY, AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING

HARDWARE)


NUMBER

Front



Bolt 12 5P-2228

Washer 12 8T-4223

Strip 2 8Y-1198 1

Strip 2 8Y-1199 2

Spacer 3 4 106-4402

Rear



Bolt 12 5P-2228

Washer 12 8T-4223

Strip 2 8Y-1198 1

Strip 2 8Y-1199 2

Spacer 3 4 106-4402

1 Former curved strip use 8E-5399 (Ref service magazine, dated Feb 11,91).2 Former curved strip use 8E-5400 (Ref service magazine, dated Feb 11,91).3 Required for Sealed & Lubricated Track.

D6N, D6M XL SystemOne TRACK ROLLER GUARDS (FULL LENGTH)METRIC HARDWARE


NUMBER


Tube 12 205-6141

Bolt 12 110-6969

Washer 24 9X-8257

Nut- Self Locking 12 8T-4778

Bolt 24 8T-4140

Spacer 24 204-6365

59


D6N, D6M LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)METRIC HARDWARE


NUMBER



Tube 12 205-6141

Bolt 12 110-6969

Washer 24 9X-8257


Bolt 28 8T-4140

Spacer 28 204-6365

D5H XL SystemOne TRACK ROLLER GUARDS (FULL LENGTH)LEVEL THREE GUIDING

INCH HARDWARE


NUMBER


Tube 12 205-6141

Bolt 12 110-6969

Washer 24 9X-8257


Bolt (5/8") 24 7X-0347

Spacer 24 204-6365

D5H LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)LEVEL THREE GUIDING

INCH HARDWARE


NUMBER



Tube 12 205-6141

Bolt 12 110-6969

Washer 24 9X-8257


Bolt (5/8") 28 7X-0347

Spacer 28 204-6365

60


D6M XL TRACK ROLLER GUARDS (FULL LENGTH)METRIC MOUNTING HARDWARE


NUMBER

Guard 2 145-7135

Guard 2 145-7134



Tube 8 4S-6559


Washer 16 9X-8257

Nut (16 mm) 8 8T-4778

Plate 4 108-0809

Bolt (12 mm) 8 8T-4192

Bolt (12 mm) 8 8T-4139

Washer 16 8T-4223

D6M LGP TRACK ROLLER GUARDS (FULL LENGTH)METRIC MOUNTING HARDWARE


NUMBER

Guard 2 145-7133

Guard 2 145-7132



Tube 10 4S-6559


Washer 20 9X-8257

Nut (16 mm) 10 8T-4778

Plate 4 108-0809

Bolt (12 mm) 8 8T-4192

Bolt (12 mm) 8 8T-4139

Washer 16 8T-4223

61


D5H XL TRACK ROLLER GUARDS (FULL LENGTH)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)


NUMBER



Tube 8 4S-6559

Bolt 8 5P-7971

Bolt 8 5P-2228

Bolt 24 7X-0347

Bolt 8 8T-8917

Washer 16 8T-4223

Washer 16 5P-8247

Nut 8 3K-2889

Plate 4 108-0809

Spacer 24 8G-5258

D5H LGP TRACK ROLLER GUARDS (FULL LENGTH)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)


NUMBER



Tube 10 4S-6559

Bolt 10 5P-7971

Bolt 8 5P-2228

Bolt 28 7X-0347

Bolt 8 8T-8917

Washer 16 8T-4223

Washer 20 5P-8247

Nut 10 3K-2889

Plate 4 108-0809

Spacer 28 8G-5258

62


D5H STD TRACK ROLLER GUARDS (FULL LENGTH)SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)


NUMBER



Tube 10 4S-6559

Bolt 10 5P-7971

Bolt 20 7X-0347

Bolt 16 8T-8917

Washer 16 8T-4223

Washer 20 8T-4122

Nut 10 3K-2889

Plate 4 8E-8783

Spacer 20 8G-5258

D5H LGP TRACK ROLLER GUARDS (FULL LENGTH)SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)


NUMBER



Tube 10 4S-6559

Bolt 10 5P-7971

Bolt 32 7X-0347

Bolt 16 8T-8917

Washer 16 8T-4223

Washer 10 5P-8247

Nut 10 3K-2889

Plate 4 8E-8783

Spacer 32 8G-5258

D6N, D6M XL SystemOne CENTER GUIDING GUARDSLEVEL TWO GUIDING, GUARD ASSEMBLY POSITIONED OVER #2 AND #5 ROLLER GROUP

METRIC HARDWARE


NUMBER


Bolt (16 mm) 16 8T-4140

Spacer 16 204-6365

63


D5H XL SystemOne CENTER GUIDING GUARDSLEVEL TWO GUIDING

GUARD ASSEMBLY POSITIONED OVER #2 AND #5 ROLLER GROUPINCH HARDWARE


NUMBER


Bolt (5/8 Inch) 16 7X-0347

Spacer 16 204-6365

D6N, D6M LGP SystemOne CENTER GUIDING GUARDSLEVEL ONE GUIDING, GUARD ASSEMBLY POSITIONED OVER #4 ROLLER GROUP

METRIC HARDWARE


NUMBER


Bolt (16 mm) 8 8T-4140

Spacer 8 204-6365

D6N, D6M LGP SystemOne CENTER GUIDING GUARDSLEVEL TWO GUIDING, GUARD ASSEMBLY POSITIONED OVER #3 AND #6 ROLLER GROUP

METRIC HARDWARE


NUMBER


Bolt (16 mm) 16 8T-4140

Spacer 16 204-6365

D5H LGP SystemOne CENTER GUIDING GUARDSLEVEL ONE GUIDING

GUARD ASSEMBLY POSITIONED OVER #4 ROLLER GROUPINCH HARDWARE


NUMBER


Bolt (5/8 Inch) 8 7X-0347

Spacer 8 204-6365

64


D5H LGP SystemOne CENTER GUIDING GUARDSLEVEL TWO GUIDING

GUARD ASSEMBLY POSITIONED OVER #3 AND #6 ROLLER GROUPINCH HARDWARE


NUMBER


Bolt (5/8 Inch) 16 7X-0347

Spacer 16 204-6365

D6N LGP CENTER GUIDING GUARDS


NUMBER


Bolt (16 mm) 12 8T-4140

Spacer 12 204-6365

D6M XL CENTER GUIDING GUARDSMETRIC MOUNTING HARDWARE


NUMBER


Bolt (16 mm) 8 8T-4140

Block 8 178-1096

D6M LGP CENTER GUIDING GUARDSMETRIC MOUNTING HARDWARE


NUMBER


Bolt (16 mm) 12 8T-4140

Spacer 12 8G-5258

D5H STD, D5H XL CENTER GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)


NUMBER


Bolt 8 7X-0347

Spacer 8 8G-5258

65


D5H LGP CENTER GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)


NUMBER


Bolt 12 7X-0347

Spacer 12 8G-5258

D5H STD, D5H XL CENTER GUIDING GUARDSSEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)


NUMBER


Bolt 8 7X-0347

Bolt 16 5P-2228

Washer 16 8T-4223

Strip 4 8G-5335

Spacer 8 8G-5258

D5H LGP CENTER GUIDING GUARDSSEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)


NUMBER


Bolt 16 7X-0347

Bolt 6 5P-7971

Bolt 24 5P-2228

Washer 24 8T-4223

Lock Nut 6 3K-2889

Tube 6 4S-6559

Strip 4 6Y-3921

Spacer 16 8G-5258

Washer 6 5P-8247

66

Elevated Sprocket TractorsD6T, D6R, D6H

D6T, D6R, D6H STD/XL/XW/IG/LGP SystemOne™ TRACKPRESS FIT MASTER

D6T/R/H STD (39 SECTION): 4RC5653-UP, 2KD5500-UP, 3ED5500-UP, 3ZF5954-UP, 4YF5500-UP, 6CF5556-UP,4LG5596-UP, 1FJ5542-UP, 2YN1-UP, 2HM1-UP, 6FR1-UP, 3ZN1-UP, 4FM1-UP, 5PR1-UP, AFM1-UP, AEM1-UP,

BPM1-UP, BRJ1-UP, BLT1-UP, BLE1-UP, BNL1-UP, BMK1-UP, HCD1-UP, GMT1-UP, TCB1-UP, JEK1-UP,JHB1-UP, SMC1-UP, PEZ1-UP, DHL1-UP

D6T/R/H XL, XW, IG (41 SECTION): 8ZJ321-UP, 9KJ621-UP, 9LK458-UP, 8SK5500-UP, 9RK5500-UP, 4MN1-UP,4JR1-UP, 4WR1-UP, 6MR1-UP, 5LN1-UP, 9BM1-UP, 5RR1-UP, 7GR1-UP, AEP1-UP, AAX1-UP, AGM1-UP,

FDT1-UP, CAD1-UP, DAE1-UP, BMY1-UP, BMJ1-UP, BRE1-UP, BRZ1-UP, BPS1-UP,GJB1-UP,JDL1-UP,LFM1-UP, EXL1-UP, LAY1-UP, GCT1-UP, LAE1-UP, KLM1-UP, HKE1-UP, RFC1-UP,

WFH1-UP, ZEB1-UP, MRT1-UP, DPS1-UP, SKL1-UP, LBD1-UP, RAY1-UP, HDC1-UP, MTJ1-UP, DJG1-UP,RLW1-UP

D6T/R/H LGP (45 SECTION): 6FC4092-UP, 8FC5500-UP, 1KD5500-UP, 5HF4276-UP, 2TG4093-UP, 3YG4290-UP,4GG5500-UP, 8LN1-UP, 4HN1-UP, 7AR1-UP, 9PN1-UP, 8TM1-UP, 4TR1-UP, 6GR1-UP, ADE1-UP, ACJ1-UP,

BNC1-UP, AFD1-UP, BPZ1-UP, BPP1-UP, WRG1-UP, DMK1-UP, LGP1-UP, KJL1-UP, LKJ1-UP, SNK1-UP,WCB1-UP, DLM1-UP, WCG1-UP, JWD1-UP

8.00" (203.2 mm) PITCH -- 22 mm BOLT

PARTNUMBER

STD39 Section

XL/XW/IG41 Section

LGP45 Section

Link Assembly -- (Quantity 2) 234-9672 1 351-0958 351-0957


Link Box Standard 351-0955 2 18 19 21

Link Box Offset 351-0956 3 1 1 1

Standard Link 234-9699 36 38 42


Track Hardware 4

Bolt (M22) 6Y-9024 156 164 180

Nut 9W-4381 156 164 180

1 Contains Standard Link Box 234-9679 and Offset Link Box 234-9681.2 Link Box Standard that is greater than 40% worn should be replaced with part number 351-0963.3 Link Box Offset that is greater than 40% worn should be replaced with part number 351-0964.4 Not part of link assembly; required to assemble track group.

67


D6T, D6R, D6H STD/XL/XW/IG/LGP SystemOne™ TRACKCLAMP MASTER



D6T/R/H XL, XW, IG (41 SECTION): 8ZJ321-UP, 9KJ621-UP, 9LK458-UP, 8SK5500-UP, 9RK5500-UP, 4MN1-UP,4JR1-UP, 4WR1-UP, 6MR1-UP, 5LN1-UP, 9BM1-UP, 5RR1-UP, 7GR1-UP, AEP1-UP, AAX1-UP, AGM1-UP,


WFH1-UP, ZEB1-UP, MRT1-UP, DPS1-UP, SKL1-UP, LBD1-UP, RAY1-UP, HDC1-UP, MTJ1-UP, DJG1-UP,RLW1-UP



8.00" (203.2 mm) PITCH -- 22 mm BOLT

PARTNUMBER

STD39 Section

XL/XW/IG41 Section

LGP45 Section

Link Assembly -- 45 Section 234-9672 1 351-0958 351-0957


Link Box Standard 351-0955 2 18 19 21

Link Box Offset 351-0956 3 1 1 1

Standard Link 234-9699 36 38 42

Clamp Master Link 4 318-1064 2 2 2

Track Hardware 4

Bolt (M22) 6Y-9024 152 160 176

Nut 9W-4381 152 160 176

Track Master Bolt(M22) 254-0224 4 4 4

1 Contains Standard Link Box 234-9679 and Offset Link Box 234-9681.2 Link Box Standard that is greater than 40% worn should be replaced with part number 351-0963.3 Link Box Offset that is greater than 40% worn should be replaced with part number 351-0964.4 Not part of link assembly; required to assemble track group.

D6T/D6R/D6H XL/XW SystemOne MADE TO ORDER (MTO) CLAMP MASTER TRACKGROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITYPART

NUMBER



68


D6T/D6R/D6H XW SystemOne MADE TO ORDER (MTO) CLAMP MASTER TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITYPART

NUMBER



D6T/D6R/D6H LGP SystemOne MADE TO ORDER (MTO) CLAMP MASTER TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITYPART

NUMBER



69


D6T D6R D6H STD/XR/XL/XW/LGP HEAVY DUTY SEALED AND LUBRICATED TRACK 1



D6R/H XR (40 SECTION): 5KK340-UP, 6CK381-UP, 7ZK5500-UP, 1YL320-UP, 2BL346-UP, 2TL5500-UP,7KN1-UP, 9MN1-UP, 7DR1-UP, 6JN1-UP, 8XN1-UP, 6HR1-UP, 7CR1-UP

D6T/R/H XL, XW (41 SECTION): 8ZJ321-UP, 9KJ621-UP, 9LK458-UP, 8SK5500-UP, 9RK5500-UP, 4MN1-UP,4JR1-UP, 4WR1-UP, 6MR1-UP, 5LN1-UP, 9BM1-UP, 5RR1-UP, 7GR1-UP, AEP1-UP, AAX1-UP, AGM1-UP,


WFH1-UP, ZEB1-UP, MRT1-UP, DPS1-UP, SKL1-UP, LBD1-UP, RAY1-UP, HDC1-UP, MTJ1-UP, DJG1-UP,RLW1-UP,



8.00" (203.2 mm) PITCH -- 3/4" BOLT

PARTNUMBER

STD39 Section

XR40 Section

XL/XW41 Section

LGP45 Section

Link Assembly (Quantity 2) 6I-9668 6I-9670 6I-9671 8E-9037

Track Links





RH Regular 8E-7405 38 39 40 44

LH Regular 8E-7406 38 39 40 44

Other Components

Pin 160-7820 2 39 40 41 45

Bushing 8E-7222 39 40 41 45


Thrust Ring 152-8071 78 80 82 90

Stopper 5G-2247 39 40 41 45

Plug 6Y-0473 39 40 41 45

Track Hardware 3

Bolt (Grouser Shoe) 6V-1792 152 156 160 176


Bolt (Self-Cleaning Shoe) 6V-1792 88

Nut 1S-1860 152 156 160 176

Master Bolt (Grouser Shoe) 9S-1838 4 4 4 4

Master Bolt (Self-Cleaning Shoe) 3P-1111 2

Master Bolt (Self-Cleaning Shoe) 9S-1838 2

Special Sets/Groups



1 When installing Heavy Duty Track on D6H earlier serial number machines, refer to IRM UC92-20 for installation and getting information.Also refer to Special Instruction SEHS9585 for additional guarding information.2 Former pin 8E-7220 (Use 9G-1642 stopper).3 Not part of link assembly; required to assemble track group.

70


D6T/D6R/D6H STD HEAVY DUTY MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITYPART

NUMBER

Link Assembly Used 6I-9668

Moderate Servcie Shoe -- 22" (560 mm) 2 6I-9641

Extreme Service Shoe -- 22" (560 mm) 2 6I-9644

Extreme Service Shoe -- 24" (610 mm) 2 1Q-4937

D6T/D6R/D6H XL/XW HEAVY DUTY MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITYPART

NUMBER


Moderate Service Shoe -- 22" (560 mm) 2 6I-9653





D6T/D6R/D6H XW HEAVY DUTY MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITYPART

NUMBER


Moderate Service Shoe - 30" (760 mm) 2 1Q-4736

Extreme Service Shoe - 30" (760 mm) 2 138-5773

D6T/D6R/D6H LGP HEAVY DUTY MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITYPART

NUMBER

Link Assembly Used 8E-9037


Moderate Service Shoe -- 36" (915 mm) 2 8E-9039


Extreme Service Shoe -- 36" (915 mm) (Trap) 2 1Q-4727

71


D6R D6H STD/XR/XL/XW/LGP ROTATING BUSHING TRACK 1

D6R/H STD (39 SECTION): 4RC5653-UP, 2KD5500-UP, 3ED5500-UP, 3ZF5954-UP, 4YF5500-UP, 6CF5556-UP,4LG5596-UP, 1FJ5542-UP, 2YN1-UP, 2HM1-UP, 6FR1-UP, 3ZN1-UP, 4FM1-UP, 5PR1-UP, AFM1-UP, AEM1-UP,

BPM1-UP, BRJ1-UP, BLT1-UP, BLE1-UP, BNL1-UP, BMK1-UP

D6R/H XR (40 SECTION): 5KK340-UP, 6CK381-UP, 7ZK5500-UP, 1YL320-UP, 2BL346-UP, 2TL5500-UP,7KN1-UP, 9MN1-UP, 7DR1-UP, 6JN1-UP, 8XN1-UP, 6HR1-UP, 7CR1-UP

D6R/H XL, XW (41 SECTION): 8ZJ321-UP, 9KJ621-UP, 9LK458-UP, 8SK5500-UP, 9RK5500-UP, 4MN1-UP,4JR1-UP, 4WR1-UP, 6MR1-UP, 5LN1-UP, 9BM1-UP, 5RR1-UP, 7GR1-UP, AEP1-UP, AAX1-UP, AGM1-UP,

FDT1-UP, CAD1-UP, DAE1-UP, BMY1-UP, BMJ1-UP, BRE1-UP, BRZ1-UP, BPS1-UP

D6R/H LGP (45 SECTION): 6FC4092-UP, 8FC5500-UP, 1KD5500-UP, 5HF4276-UP, 2TG4093-UP, 3YG4290-UP,4GG5500-UP, 8LN1-UP, 4HN1-UP, 7AR1-UP, 9PN1-UP, 8TM1-UP, 4TR1-UP, 6GR1-UP, ADE1-UP, ACJ1-UP,

BNC1-UP, AFD1-UP, BPZ1-UP, BPP1-UP,8.00" (203.2 mm) PITCH -- 3/4" BOLT

PARTNUMBER

STD39 Section

XR40 Section

XL/XW41 Section

LGP45 Section

Link Assembly (Quantity 2) 152-8053 2 152-8048 3 152-8050 4 152-8049 5

Track Links



RH Bushing End Master 6 165-1756 1 1 1 1

LH Bushing End Master 6 165-1757 1 1 1 1

RH Regular 6 165-1754 38 39 40 44

LH Regular 6 165-1755 38 39 40 44

Other Components

Pin 160-7821 39 40 41 45

Bushing 165-1769 39 40 41 45


Thrust Ring 152-8071 156 160 164 180

Stopper 5G-2247 39 40 41 45

Plug 6Y-0473 39 40 41 45

Track Hardware 7

Bolt 6V-1792 152 156 160 176

Nut 1S-1860 152 156 160 176

Master Bolt 9S-1838 4 4 4 4

1 Rotating Bushing Track is an application specific undercarriage designed for high abrassion/low impact applications (4,000 hour systemlife or less). When installing Rotating Bushing Track on existing machines, refer to IRM UC95-5 for installation and guarding information.Also refer to Special Instruction SEHS9585 for additional guarding information. For servicing information refer to Special InstructionSEHS9542. This product is not for use on Track Skidders.2 Serviced replaced by 6I-9668 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.3 Serviced replaced by 6I-9670 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.4 Serviced replaced by 6I-9671 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.5 Serviced replaced by 8E-9037 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.6 Joint assembly (Includes link and insert). Insert not serviced.7 Not part of link assembly; required to assemble track group.

72


D6H STD/XR/XL/LGP HYBRID TRACKD6H STD (39 SECTION): 8KB1-UP, 7PC1-UP, 4RC1-5652, 2KD1-5499, 3ED1-5499, 3ZF1-5953, 4YF1-5499,

6CF1-5555, 4LG1-5595, 1FJ1-5541D6H XR (40 SECTION): 5KK1-339, 6CK1-380, 7ZK1-5499, 1YL1-319, 2BL1-345, 2TL1-5499

D6H XL (41 SECTION): 8ZJ1-320, 9KJ1-620, 9LK1-457, 8SK1-5499, 9RK1-5499D6H LGP (45 SECTION): 8YC1-UP, 6FC1-4091, 8FC1-5499, 1KD1-5499, 5HF1-4275, 2TG1-4092, 3YG1-4289,

4GG1-54998.00" (203.2 mm) PITCH -- 3/4" BOLT

PARTNUMBER

STD39 Section

XR40 Section

XL/XW41 Section

LGP45 Section

Link Assembly -- Quantity 2 236-9864 1 236-9865 1 236-9866 1 236-9874 1

Track Links





RH Regular 228-2735 38 39 40 44

LH Regular 228-2736 38 39 40 44

Other Components

Pin 160-7819 2 39 40 41 45

Bushing 230-4512 39 40 41 45


Thrust Ring 152-8071 78 80 82 90

Stopper 5G-2247 39 40 41 45

Plug 6Y-0473 39 40 41 45

Track Hardware 3

Bolt (Grouser Shoe) 1S-1859 152 156 160 176

Bolt (Self-Cleaning Shoe) 1S-1859 88

Bolt (Self-Cleaning Shoe) 5A-7524 88

Nut 1S-1860 152 156 160 176

Master Bolt (Grouser Shoe) 9S-1838 4


Master Bolt (Self-Cleaning Shoe) 9S-1838 4 4 4 2

Special Sets/Groups



1 See table titled "D6R/H Hybrid Track Shoes" for selections.2 Former pin 3P-1108 (Use 9G-1642 stopper).3 Not part of link assembly; required to assemble track group.

73


D6H STD/XR/XL/LGP SEALED AND LUBRICATED TRACKD6H STD (39 SECTION): 8KB1-UP, 7PC1-UP, 4RC1-5652, 2KD1-5499, 3ED1-5499, 3ZF1-5953, 4YF1-5499,

6CF1-5555, 4LG1-5595, 1FJ1-5541D6H XR (40 SECTION): 5KK1-339, 6CK1-380, 7ZK1-5499, 1YL1-319, 2BL1-345, 2TL1-5499

D6H XL (41 SECTION): 8ZJ1-320, 9KJ1-620, 9LK1-457, 8SK1-5499, 9RK1-5499D6H LGP (45 SECTION): 8YC1-UP, 6FC1-4091, 8FC1-5499, 1KD1-5499, 5HF1-4275, 2TG1-4092, 3YG1-4289,

4GG1-54998.00" (203.2 mm) PITCH -- 3/4" BOLT

PARTNUMBER

STD39 Section

XR40 Section

XL/XW41 Section

LGP45 Section

Link Assembly (Quantity 2) 8E-4326 1 8E-4327 2 9U-9062 3 8E-4328 4

Track Links





RH Regular 8E-2355 38 39 40 44

LH Regular 8E-2356 38 39 40 44

Other Components

Pin 160-7819 5 39 40 41 45

Bushing 6Y-0930 6 39 40 41 45


Thrust Ring 152-8071 78 80 82 90

Stopper 5G-2247 39 40 41 45

Plug 6Y-0473 39 40 41 45

Track Hardware 7

Bolt (Grouser Shoe) 6V-1792 152 156 160 176



Nut 1S-1860 152 156 160 176

Master Bolt (Grouser Shoe) 9S-1838 4 4 4 4


Master Bolt (Self-Cleaning Shoe) 9S-1838 2

Special Sets/Groups


Bushing and Seal Group (39 Sections) 6Y-5406 1 1 1 1

1 This link assembly has been replaced by the two following options: (A) Upgrade to heavy duty link assembly (6I-9668) allows reuse ofcurrent shoes, but requires moving guide guards out board. Refer to the following Special Instructions SEHS9585 (reusing existingguards) or SEHS9350 (installing new guards). or (B) Upgrade to hybrid link assembly (236-9864) requires new shoes due to different bolthole pattern, see table titled "D6H Hybrid Track Shoes" for selections.2 This link assembly has been replaced by the two following options: (A) Upgrade to heavy duty link assembly (6I-9670) allows reuse ofcurrent shoes, but requires moving guide guards out board. Refer to the following Special Instructions SEHS9585 (reusing existingguards) or SEHS9350 (installing new guards). or (B) Upgrade to hybrid link assembly (236-9865) requires new shoes due to different bolthole pattern, see table titled "D6H Hybrid Track Shoes" for selections.3 This link assembly has been replaced by the two following options: (A) Upgrade to heavy duty link assembly (6I-9671) allows reuse ofcurrent shoes, but requires moving guide guards out board. Refer to the following Special Instructions SEHS9585 (reusing existingguards) or SEHS9350 (installing new guards). or (B) Upgrade to hybrid link assembly (236-9866) requires new shoes due to different bolthole pattern, see table titled "D6H Hybrid Track Shoes" for selections.4 This link assembly has been replaced by the two following options: (A) Upgrade to heavy duty link assembly (8E-9037) allows reuse ofcurrent shoes, but requires moving guide guards out board. Refer to the following Special Instructions SEHS9585 (reusing existingguards) or SEHS9350 (installing new guards). or (B) Upgrade to hybrid link assembly (236-9874) requires new shoes due to different bolthole pattern, see table titled "D6H Hybrid Track Shoes" for selections.5 Former pin 3P-1108 (Use 9G-1642 stopper).6 Straight wall bushings (9G-8734), used in early Crescent Seal Link Assemblies remain serviceable through Parts.7 Not part of link assembl; required to assemble track group.

74


D6R/D6H LGP HEAVY DUTY QUAD TRACK 1

8.00" (203.2 mm) PITCH -- 3/4" BOLT

QUANTITYPART

NUMBER

Link Assembly -- 45 Section 2 8E-9037 2

Components of Outrigger Chain: (Serviced Individually; quantities shown are per side)

Track Links

RH Pin End Master 1 8E-7407

LH Pin End Master 1 8E-7408

RH Bushing End Master 1 8E-7409

LH Bushing End Master 1 8E-7410

RH Regular 44 8E-7405

LH Regular 44 8E-7406

Other Components

Stub Pin 90 106-8237

Stub Bushing 90 106-8235

Track Hardware (Quantities shown are per side -- 1 center chain; 2 outrigger chains) 3

Bolt 352 6V-1792

Nut 352 1S-1860

Master Bolt 8 9S-1838

1 When installing Heavy Duty Track on existing machines, refer to IRM UC92-20 for installation and guarding information. Also refer toSpecial Instruction SEHS9585 for additional guarding information.2 Refer to Heavy Duty Track section for component information.3 Not part of link assembly; required to assemble track group.

75


D6T, D6R, D6H SystemOne TRACK SHOES8.00" (203.2 mm) PITCH - 22 mm BOLT


MASTERSHOE PART

NUMBER



Moderate Service (Offset RH) 1 22.0" (560 mm) 266-0083 --

Moderate Service (Offset LH) 1 22.0" (560 mm) 266-0084 --


Moderate Service (Center Hole) 24.0" (610 mm) 283-8705 2 339-0267 2

Moderate Service (Center Hole) 26.0" (660 mm) 292-5653 339-0262

Moderate Service (Clipped Grouser) 26.0" (660 mm) 322-7981 339-0253


Moderate Service (Clipped Grouser) 28.0" (710 mm) 294-0571 2 339-0259

Moderate Service (Offset RH) 3 28.0" (710 mm) 266-0088 2 --

Moderate Service (Offset LH) 3 28.0" (710 mm) 266-0089 2 --

Moderate Service (Clipped Grouser) (Offset RH) 3 28.0" (710 mm) 273-1685 2 --

Moderate Service (Clipped Grouser) (Offset LH) 3 28.0" (710 mm) 273-1686 2 --


Moderate Service (Center Hole) 30.0" (760 mm) 283-8707 2 339-0266 2

Moderate Service (Offset RH) 4 31.0" (790 mm) 294-0569 339-0258

Moderate Service (Offset LH) 4 31.0" (790 mm) 294-0570 339-0257

Moderate Service (Offset RH) 5 35.0" (900 mm) 265-8320 2 289-3579 2

Moderate Service (Offset LH) 5 35.0" (900 mm) 265-8321 2 289-3578 2




Extreme Service (Center Hole) 22.0" (560 mm) 283-8702 2 339-0268 2


Extreme Service (Clipped Grouser) 24.0" (610 mm) 274-2008 2 339-0269 2


Extreme Service (Offset RH) 6 24.0" (610 mm) 297-8456 2 297-8460 2

Extreme Service (Offset LH) 6 24.0" (610 mm) 297-8455 2 297-8459 2

Extreme Service (Offset RH) (Clipped Grouser) 6 24.0" (610 mm) 297-8454 297-8458 2

Extreme Service (Offset LH) (Clipped Grouser) 6 24.0" (610 mm) 297-8453 297-8457 2

Extreme Service 28.0" (710 mm) 294-0567 2 339-0254 2

Extreme Service (Center Hole) 28.0" (710 mm) 291-5594 2 339-0263 2



Extreme Service (Offset RH) 4 31.0" (790 mm) 294-0574 339-0256 2

Extreme Service (Offset LH) 4 31.0" (790 mm) 294-0575 339-0255 2



Self - Cleaning 39.0" (1000 mm) 200-5856 --

76


D6T, D6R, D6H SystemOne TRACK SHOES (CONT)8.00" (203.2 mm) PITCH - 22 mm BOLT


MASTERSHOE PART

NUMBER

Triple Grouser 24.0" (610 mm) 292-5655 339-0261

1 To be used on Series II earlier XL machines equipped with a PAT Blade.2 Track shoe is made as ordered (MAO) (not stocked in parts distribution centers) and typically has a 6-12 week lead-time.3 To be used on R Series II XW and XL machines equipped with a PAT Blade.4 To be used on D6T, D6R Series III XW and LGP machines equipped with a PAT Blade.5 To be used on D6R Series II LGP machines equipped with a PAT Blade.6 To be used on D6T, D6R Series III XL machines equipped with a PAT Blade.

77


D6T, D6R, D6H TRACK SHOES8.00" (203.2 mm) PITCH -- 3/4" BOLT

(PER MACHINE) WIDTH

REGULARSHOE PART

NUMBER

MASTERSHOE PART


Extreme Service 18.0" (460 mm) 6Y-6390 6Y-6392 Y Y N N

Extreme Service 20.0" (510 mm) 6Y-6391 6Y-6394 Y Y Y N

Extreme Service (Trapezoidal Opening) 20.0" (510 mm) 1Q-4935 1Q-4996 Y Y Y N



Extreme Service (Offset RH) 1 22.0" (560 mm) 252-9705 252-9707 N N Y N

Extreme Service (Offset LH) 1 22.0" (560 mm) 252-9706 252-9708 N N Y N

Extreme Service 24.0" (610 mm) 1Q-4930 6Y-6397 Y Y Y Y

Extreme Service (Trapezoidal Opening) 24.0" (610 mm) 157-1373 157-1374 Y Y Y Y


Extreme Service 30.0" (760 mm) 138-5774 6Y-6404 N N N Y

Extreme Service (Trapezoidal Opening) 30.0" (760 mm) 1Q-4973 1Q-4607 N N N Y


Extreme Service (Trapezoidal Opening) 36.0" (915 mm) 1Q-4728 1Q-4729 N N N Y

Moderate Service 20.0" (510 mm) 6Y-6285 6Y-6292 Y Y Y N

Moderate Service (Trapezoidal Opening) 20.0" (510 mm) 1Q-4924 1Q-4994 Y Y Y N


Moderate Service (Trapezoidal Opening) 22.0" (560 mm) 1Q-4926 1Q-4995 Y Y Y N

Moderate Service (Offset RH) 1 22.0" (560 mm) 160-4939 160-5798 N N Y N

Moderate Service (Offset LH) 1 22.0" (560 mm) 160-4940 160-5799 N N Y NModerate Service (Trapezoidal Opening) (RHOffset) 1 22.0" (560 mm) 171-2387 171-2386 N N Y NModerate Service (Trapezoidal Opening) (LHOffset) 1 22.0" (560 mm) 171-2383 171-2382 N N Y N

Moderate Service 24.0" (610 mm) 6Y-6287 6Y-6296 Y Y Y Y

Moderate Service (Trapezoidal Opening) 24.0" (610 mm) 1Q-4958 1Q-4997 Y Y Y Y

Moderate Service 26.0" (660 mm) 133-2890 6Y-6298 Y Y Y Y


Moderate Service (RH Offset) 2 28.0" (710 mm) 185-5253 185-5254 N N Y N

Moderate Service (LH Offset) 2 28.0" (710 mm) 185-5256 185-5257 N N Y N

Moderate Service 30.0" (760 mm) 6Y-8973 6Y-6300 N N N Y

Moderate Service (Trapezoidal Opening) 30.0" (760 mm) 1Q-4744 1Q-4745 N N N Y



Moderate Service (Trapezoidal Opening) 36.0" (915 mm) 196-1233 196-1232 N N N Y

Moderate Service (RH Offset) 3 36.0" (915 mm) 200-6495 200-6496 N N N Y

Moderate Service (Offset LH) 3 36.0" (915 mm) 200-6497 200-6498 N N N Y

Double Grouser 20.0" (510 mm) 8E-4498 8E-6114 Y N N N

Double Grouser 21.7" (550 mm) 127-7009 8E-4497 Y N N N

Self-Cleaning 39.0" (990 mm) 116-8545 116-8548 N N N Y

Moderate Service (Tri) (RH) 26" (660 mm) 133-0248 133-0246 N N N Y

Moderate Service (Tri) (LH) 26" (660 mm) 133-0249 133-0247 N N N Y

78


D6T, D6R, D6H TRACK SHOES (CONT)8.00" (203.2 mm) PITCH -- 3/4" BOLT

(PER MACHINE) WIDTH

REGULARSHOE PART

NUMBER

MASTERSHOE PART


Moderate Service (Tri) (RH) (Clipped Grouser) 30" (760 mm) 133-0252 133-0250 N N N Y

Moderate Service (Tri) (LH) (Clipped Grouser) 30" (760 mm) 133-0253 133-0251 N N N Y

Quad (MS) 36.0" (915 mm) 196-1235 196-1234 N N N Y

1 To be used on XL machines equipped with a PAT Blade.2 To be used on XW machines equipped with a PAT Blade.3 To be used on LGP machines equipped with a PAT Blade.

D6H HYBRID TRACK SHOESUSE WITH TRACK LINKS 228-2735, 228-2736

8.00" (203.2 mm) PITCH -- 3/4" BOLT

TYPE WIDTH

REGULARSHOE PART

NUMBER

MASTERSHOE PART


Extreme Service 18.0" (460 mm) 6Y-6393 6Y-6392 Y Y N N




Extreme Service 24.0" (610 mm) 6Y-6398 6Y-6397 Y Y Y Y

Extreme Service (Trapezoidal Opening) 24.0" (610 mm) 3Q-5391 1 157-1374 Y Y Y Y

Extreme Service 30.0" (760 mm) 6Y-6405 6Y-6404 N N N Y

Extreme Service 36.0" (915 mm) 6Y-6401 169-5867 N N N Y





Moderate Service 30.0" (760 mm) 6Y-6299 6Y-6300 N N N Y


Double Grouser 21.7" (550 mm) 8E-4496 8E-4497 Y N N N

Self-Cleaning 36.0" (915 mm) 3P-1134 3P-1133 N N N Y

1 Clipped Grouser

D6T, D6R, D6H SPROCKETSSystemOne, Heavy Duty, Hybrid, Rotating Bushing, and Sealed and Lubricated Track


NUMBER

Sprocket Segment (Tough Steel) (5 Tooth) 5 173-0946

Bolt 25 6V-0937

Nut 25 7H-3607

Washer 25 2S-5658

79


D6T, D6R, D6H, SystemOne RELIEVED TREAD IDLERSTD, XL, XW, IG, LGP

(Per Machine) QUANTITYPART

NUMBER

Group 4 323-1170 1

Components of Group


Bearing 2 2 9P-2245

Shaft 1 149-2494

Collar 2 107-3945

Retainer 2 149-2495


Bolt 24 1T-0765

Washer 24 5M-2894


Toric Ring 2 2 162-2166


Seal -- Collar 2 7J-2036

Stopper 1 9G-5664

Plug 1 6Y-0473

1 See Special Instructions REHS4393 for information regarding modification of idler guards/scrapers on existing machines built prior toApril 2010.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 Use (1) 9W2423 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW1067691 Thrust Washer. See Special Instruction SEHS8515.

80


D6T, D6R, D6H SystemOne LANDFILL/SPECIAL APPLICATION RELIEVED TREAD IDLERSTD, XL, XW, IG, LGP

QUANTITYPART

NUMBER

Group 4 351-0886 1

Components of Group


Bearing 2 2 9P-2245

Shaft 1 149-2494

Collar 2 167-1951

Ring 2 170-0792

Seal 2 167-1952

Retainer 2 167-1950


Bolt 24 9B-7237

Washer 24 8T-4896


Toric Ring 2 2 162-2166



Stopper 1 9G-5664

Plug 1 6Y-0473

1 See Special Instructions REHS4393 for information regarding modification of idler guards/scrapers on existing machines built prior toApril 2010.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 Use (1) 9W2423 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW1067691 Thrust Washer. See Special Instruction SEHS8515.

81


D6T, D6R, D6H, STD SystemOne CENTER TREAD IDLER HARDWARE ARRANGEMENT


NUMBER

Hardware Idler Arrangement (Includes hardware for 4 idler groups) 1 293-4691


Shim (Permanent) (6mm) 8 233-4846

Shim (Adjustable) (10mm) 8 156-5342

Bolt (20mm) (D6R) 16 8T-0656

Washer (20mm) (D6R) 16 153-5044

Bolt (3/4") (D6H) 16 6K-1330

Washer (3/4") (D6H) 16 5P-8248

Plate- Scraper Base (Weld on top of frame) 4 234-4319

Side Scraper (Bolts to scraper base plate) 8 238-0452

Tread Scraper (Bolts to scraper base plate) 4 238-0453



Plate Assembly (Weld to front end guide) 1 2 283-5249


Plate Assembly (Weld to rear end guide) 1 2 283-5253


Plate - Scraper (Bolts to end guides) 8 282-4017

Bolt (12 mm) (Plate to end guide) 24 8T-4194

Washer (Plate to end guide) 24 5P-1076

End Cap (Abutment Style) 2 8 152-3421

Block 2 8 165-6946

1 Plate assembly only required when retrofitting a machine in the field. New machines from the factory already have the threaded holesin the end guides to mount the scraper plates.2 This part is not included within the hardware arrangment. Needs to be ordered separately or reused from current design.

82


D6T, D6R, D6H, XL, XW, IG SystemOne CENTER TREAD IDLER HARDWAREARRANGEMENT


NUMBER



Shim (Permanent) (6mm) 8 233-4846

Shim (Adjustable) (10mm) 8 156-5342

Bolt (20mm) (D6R) 16 8T-0656

Washer (20mm) (D6R) 16 153-5044

Bolt (3/4") (D6H) 16 6K-1330

Washer (3/4") (D6H) 16 5P-8248

Plate- Scraper Base (Weld toTop front Track Roller Frame) 2 234-4320

Plate- Scraper Base (Weld to Top Rear Track Roller Frame) 2 234-4319

Side Scraper (Front) (Bolt to Scraper Base Plate) 4 238-0450

Side Scraper (Rear) (Bolt to Scraper Base Plate) 4 238-0452

Tread Scraper 4 238-0453



Plate Assembly (Weld to Rear End Guide) 1 2 283-5251

Plate Assembly (Weld to Rear End Guide) 1 2 283-5252

Plate (Weld to Front End Guide) 1 4 279-4242

Plate Scraper (Front) (Bolts to End Guide) 4 279-4243

Bolt (12 mm) (Plate Scraper to End Guide) 12 8T-4183

Washer (12 mm) (Plate Scraper to End Guide) 12 5P-1076

Plate Scraper (Rear) (Bolts to End Guide) 4 282-4017

Bolt (12 mm) (Plate Scraper to End Guide) 12 8T-4194

Washer (12 mm) (Plate Scraper to End Guide) 12 5P-1076


Block 2 8 165-6946

1 Plate assembly only required when retrofitting a machine in the field. New machines from the factory already have the threaded holesin the end guides to mount the scraper plates.2 This part is not included within the hardware arrangment. Needs to be ordered separately or reused from current design.

83


D6T, D6R, D6H, LGP SystemOne CENTER TREAD IDLER HARDWARE ARRANGEMENT


NUMBER











Shim (Front) 4 156-5342

Shim (Rear) 8 174-8790

Bolt (20mm) (D6R) 16 8T-0657

Washer (20mm) (D6R) 16 153-5044

Bolt (3/4") (D6H) 16 1D-4617

Washer (3/4") (D6H) 16 5P-8248

Plate- Scraper Base (Weld of top of frame) 4 234-4319

Side Scraper (Bolts to scraper base plate) 8 238-0452

Tread Scraper (Bolts to scraper base plate) 4 238-0453







Plate - Scraper (Bolts to end guides) 8 282-4017

Bolt (12 mm) (Plate to end guide) 24 8T-4194

Washer (12 mm) (Plate to end guide) 24 5P-1076

1 Plate assembly only required when retrofitting a machine in the field. New machines from the factory already have the threaded holesin the end guides to mount the scraper plates.

84


D6T STD/XL/XW, D6R STD/XL/XW, D6H STD/XL IDLERSINCREASED TREAD WEAR MATERIAL


FORMERPART

NUMBERPART

NUMBER

Group (Large Diameter - 570 mm tread) 4 -- 202-4304

Components of Group

Idler Assembly (Large Diameter) 1 202-4303 202-4303

Bearing 1 2 9P-2245 9P-2245

Shaft 1 6T-3220 149-2494

Collar 2 -- 107-3945

Retainer 2 9G-9349 149-2495

Thrust Washer 2 2 106-7691 106-7691

Bolt 24 0S-1594 1T-0765

Washer 24 5M-2894 5M-2894

Stabilizer Ring 2 6T-4871 --

Seal -- Duo-Cone Group (Inverted Seal) 2 7T-0158 --

Toric Ring 1 1 6P-8912 --

O-Ring 1 1 6V-2701 --

Seal -- Duo-Cone Group (Symmetric Seal) 2 -- 162-7862

Toric Ring 2 -- 162-2166


Seal -- Collar 2 -- 7J-2036

Stopper 1 9G-5664 9G-5664

Plug 1 6Y-0473 6Y-0473


End Cap (Abutment Style) 2 152-3421 152-3421

Block 2 165-6946 165-6946

Bolt (3/4") 4 1D-4615 1D-4615

Washer (3/4") 4 5P-8248 5P-8248

Shim (Front Idlers Only) 2 8G-9530 8G-9530

Mounting Hardware (D6R) 3


Block 2 165-6946 165-6946

Bolt (20 mm) 4 6V-9167 6V-9167

Washer (20 mm) 4 8T-3282 8T-3282


Special Application Arctic Idler Group

Idler Group (Large Diameter) 4 - 205-0709

Seal -- Duo-Cone Group (Symmetric Seal) 2 - 162-7862

Toric Ring 2 - 162-2166


Toric Ring 1 7T-1094 --

O-Ring 1 8T-2272 --

1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 Use (1) 9W2423 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW1067691 Thrust Washer. See Special Instruction SEHS8515.3 These components are not included in the idler group; quantities shown are required to mount each idler.

85


D6R/D6H XR IDLERSINCREASED TREAD WEAR MATERIAL


FORMERPART

NUMBERPART

NUMBER

Group (Small Diameter - 545 mm tread) 4 -- 202-4296

Components of Group

Idler Assembly (Small Diameter) 1 202-4295 202-4295

Bearing 1 2 9P-2245 9P-2245

Shaft 1 6T-3220 149-2494

Collar 2 -- 107-3945

Retainer 2 9G-9349 149-2495

Thrust Washer 2 2 106-7691 106-7691

Bolt 24 0S-1594 1T-0765

Washer 24 5M-2894 5M-2894




O-Ring 1 1 6V-2701 --


Toric Ring 2 -- 162-2166



Stopper 1 9G-5664 9G-5664

Plug 1 6Y-0473 6Y-0473



Block 2 165-6946 165-6946

Bolt (3/4") 4 1D-4615 1D-4615

Washer (3/4") 4 5P-8248 5P-8248




Block 2 165-6946 165-6946

Bolt (20 mm) 4 6V-9167 6V-9167

Washer (mm) 4 8T-3282 8T-3282



Seal -- Duo-Cone Group 2 7T-4722 --


O-Ring 1 8T-2272 --


86


D6T/D6R/D6H LGP IDLERS 1

INCREASED TREAD WEAR MATERIAL4HN0709-UP, 4TR1123-UP, 6GR0708-UP, 7AR0717-UP, 8TM1303-UP, 9PN1851-UP, 8LN0547-UP


FORMERPART

NUMBERPART

NUMBER

Group (Small Diameter - 545 mm tread) 4 -- 202-4296

Components of Group


Bearing 2 2 9P-2245 9P-2245

Shaft 1 6T-3220 149-2494

Collar 2 -- 107-3945

Retainer 2 9G-9349 149-2495

Thrust Washer 3 2 106-7691 106-7691

Bolt 24 0S-1594 1T-0765

Washer 24 5M-2894 5M-2894




O-Ring 2 1 6V-2701 --


Toric Ring 2 -- 162-2166



Stopper 1 9G-5664 9G-5664

Plug 1 6Y-0473 6Y-0473



Block 2 165-6946 165-6946

Bolt (3/4") 4 1D-4615 1D-4615

Washer (3/4") 4 5P-8248 5P-8248




Block 2 165-6946 165-6946

Bolt (20 mm) 4 6V-9167 6V-9167

Washer (20 mm) 4 8T-3282 8T-3282





O-Ring 1 8T-2272 --

1 Effective serial numbers when D6R's were equipped with 4 small idlers (small diameter)1KD1-401, 1KD662-UP, 2TG544-UP, 3YG557-UP,4GG466-UP, 4HN1-UP, 4TR1-UP, 5HF442-UP, 6FC718-UP, 6GR1-UP, 7AR1-UP, 8FC1-460, 8FC965-UP, 8LN1-UP, 8TM1-UP, 8YC1-472,8YC476, 8YC478, 8YC480-481, 8YC483, 9PN1-UP2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 Use (1) 9W2423 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW1067691 Thrust Washer. See Special Instruction SEHS8515.4 These components are not included in the idler group; quantities shown are required to mount each idler.

87


D6H LGP IDLERSINCREASED TREAD WEAR MATERIAL

FRONT IDLERS LARGE DIAMETER, REAR IDLERS SMALL DIAMETER1KD402-661, 2TG1-543, 3YG1-556, 4GG1-465, 5HF1-441, 6FC1-717, 8FC461-964, 8YC473-UP


FORMERPART

NUMBERPART

NUMBER

Group (Front, Large Diameter - 570 mm tread) 2 -- 202-4304

Group (Rear, Small Diameter - 545 mm tread) 2 -- 202-4296

Components of Group

Idler Assembly (Large Diameter) 1 202-4303 202-4303


Bearing 1 2 9P-2245 9P-2245

Shaft 1 6T-3220 149-2494

Collar 2 -- 107-3945

Retainer 2 9G-9349 149-2495

Thrust Washer 2 2 106-7691 106-7691

Bolt 24 0S-1594 1T-0765

Washer 24 5M-2894 5M-2894




O-Ring 1 1 6V-2701 --


Toric Ring 2 -- 162-2166



Stopper 1 9G-5664 9G-5664

Plug 1 6Y-0473 6Y-0473

Mounting Hardware 3


Block 2 165-6946 165-6946

Bolt (3/4") 4 1D-4615 1D-4615

Washer (3/4") 4 5P-8248 5P-8248





O-Ring 1 8T-2272 --


88


D6T, D6R, D6H Heavy Duty, Hybrid, and SystemOne CARRIER ROLLERS


NUMBER


D6T, D6R, D6H SystemOne TRACK ROLLERS


NUMBER


Mounting Hardware (D6T/R) 2

Cap 2 317-9080

Bolt (20 mm) 4 8T-0360

Washer 4 8T-3282


Cap 2 317-9079

Bolt (3/4") 4 1D-4610

Washer 4 5P-8248

1 12 required for STD machines; 14 required for XL, XW, and IG machines; 16 required for LGP machines.2 These components are not included in the roller group; quantities shown are required to mount each roller.

D6T, D6R, D6H STANDARDIZED TRACK ROLLERSDESIGN WITH END CAPS


NUMBER

Double Flange (DF) 4 1 288-0935

Single Flange (SF) 8 288-0934

Double Flange (DF) (Arctic) 4 1 288-0946

Single Flange (SF) (Arctic) 8 288-0945

Double Flange (DF) (High Heat) 4 1 288-0948

Single Flange (SF) (High Heat) 8 288-0947

Double Flange (DF) (Tall) - 2 288-0936


Cap 2 317-9080

Bolt (20 mm) 4 8T-0360

Washer 4 8T-3282


Cap 2 317-9079

Bolt (3/4") 4 1D-4610

Washer 4 5P-8248

1 8 DF rollers for LGP, 6 DF rollers for XR, XL, XW, and IG machines.2 Optional (DF) roller for guiding. Use quantity required for specific roller frame type.3 These components are not included in the roller group; quantities shown are required to mount each roller.

89


D6T, D6R, D6H TRACK ROLLERSEND COLLARS, SYMMETRIC SEAL DESIGN


NUMBER

Double Flange (DF) 4 1 231-3088 2

Single Flange (SF) 8 231-3087 3

Double Flange, Tall (DF, Tall) - 4 231-3089 5

Components of Group



Double Flange, Tall (DF, Tall) 1 120-5804 5


Bearing 6 1 8P-5197

Shaft 1 116-6702 7



Ring (Lock) 2 5M-4443

Seal -- Duo-Cone Group 2 171-5882

Toric Ring 6 2 162-2166



Stopper 1 7G-4332

Plug 1 6Y-0473


Bolt (3/4") 4 1D-4608

Washer 4 5H-1504


Bolt (20 mm) 4 6V-5845

Washer 4 8T-3282

1 8 DF rollers for LGP machines, 6 DF rollers for XR and XL machines.2 For D6T/R Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9080, 4 - Bolt 8T-0360, 4 - Washer 8T-3282. For D6HServiced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.3 For D6T/R Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9080, 4 - Bolt 8T-0360, 4 - Washer 8T-3282. For D6HServiced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.4 Optional DF rollers for guiding. Use quantity required for specific roller frame type.5 For D6T/R Serviced Replaced By: 1 - Roller Group (DF Tall) 288-0936, 2 - End Cap 317-9080, 4 - Bolt 8T-0360, 4 - Washer 8T-3282. For D6HServiced Replaced By: 1 - Roller Group (DF Tall) 288-0936, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.6 Component of preceding assembly or group; quantity shown is quantity per assembly or group.7 For D6T/R Serviced Replaced By: 1 - Roller Group (DF) 288-0935 or 1 - Roller Group (SF) 288-0934, and 2 - End Cap 317-9080, 4 - Bolt8T-0360, 4 - Washer 8T-3282. For D6H Serviced Replaced By: 1 - Roller Group (DF) 288-0935, or 1 - Roller Group (SF) 288-0934, 2 - End Cap317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.8 These components are not included in the roller group; quantities shown are required to mount each roller.

90


D6H TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER)


NUMBER



Components of Group

Roller Shell (DF) 1 7T-4106 2

Roller Shell (SF) 1 7T-4101 3

Bearing 2 9P-2245

Shaft 1 6T-0720 4


Thrust Washer 5 1 9W-2423

Dowel 6 4 2H-1190

Bolt (Retainer) 12 0S-1594

Washer (Retainer) 12 5M-2894




Ring 6 1 6V-2701

Seal -- Retainer O-Ring 2 5F-3144

Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 7

End Cap 2 6T-4861

Bolt (3/4") 4 1D-4610

Washer 4 5P-8248



Toric Ring 1 7T-1094

O-Ring 6 1 8T-2272

1 8 DF rollers for LGP machines, 6 DF rollers for XR and XL machines.2 For D6H Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.3 For D6H Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.4 For D6H Serviced Replaced By: 1 - Roller Group (DF) 288-0935, or 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610,4 - Washer 5P-82485 These components are only to repair retainer assembly. See Special Instruction SEHS8515.6 Component of preceding assembly or group; quantity shown is quantity per assembly or group.7 These components are not included in the roller group; quantities shown are required to mount each roller.

91


D6T, D6R STD SystemOne END GUIDING GUARDSMetric Hardware


NUMBER

Front




Bolt (12 mm) 16 8T-4184

Washer 16 8T-4223

Rear




Bolt (12 mm) 16 8T-4184

Washer 16 8T-4223

D6T, D6R XL, XW, IG SystemOne END GUIDING GUARDSMetric Hardware


NUMBER

Front




Bolt (12 mm) 12 8T-4184

Washer 12 8T-4223

Rear




Bolt (12 mm) 16 8T-4184

Washer 16 8T-4223

92


D6T, D6R LGP SystemOne END GUIDING GUARDSMetric Hardware


NUMBER

Front




Bolt (12 mm) 16 8T-4184

Washer 16 8T-4223

Rear




Bolt (12 mm) 16 8T-4184

Washer 16 8T-4223

D6T, D6R STD END GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)


NUMBER

Front




Bolt (12 mm) 16 8T-4139

Washer 16 8T-4223

Rear




Bolt (12 mm) 16 8T-4139

Washer 16 8T-4223

93


D6R XR END GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)


NUMBER

Front




Bolt (12 mm) 16 8T-4139

Washer 16 8T-4223

Rear




Bolt (12 mm) 12 8T-4139

Washer 12 8T-4223

D6T, D6R XL END GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)


NUMBER

Front




Bolt (12 mm) 12 8T-4139

Washer 12 8T-4223

Rear




Bolt (12 mm) 16 8T-4139

Washer 16 8T-4223

94


D6T, D6R LGP END GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)


NUMBER

Front




Bolt (12 mm) 16 8T-4139

Washer 16 8T-4223

Rear




Bolt (12 mm) 16 8T-4139

Washer 16 8T-4223

D6H STD SystemOne END GUIDING GUARDS 1

Metric Hardware

()PER MACHINE QUANTITYPART

NUMBER

Front

Guard Assembly 2 6I-8141


Strip 4 255-7174

Bolt (12 mm) 16 8T-4184

Washer 16 8T-4223

Rear



Strip 4 255-7174

Bolt (12 mm) 16 8T-4184

Washer 16 8T-4223

1 D6H machines that have been upgraded to heavy duty or rotating bushing track, only requires ordering strips and hardware from thetable to be compatible with SystemOne track. D6H machines with seal and lubricated track (SALT) and end guiding guards that have aSPACER between the guard and the wear strip, are only required to remove spacer and order the strips and hardware from this table,then machine is compatible with SystemOne track. For D6H machines with with seal and lubricated track (SALT) and end guiding guardsthat have NO SPACERS between the guard and strip have TWO options available to install SystemOne on those machines: (A) Torch offold guards and order guards and components from this table, weld at new location makes machine compatible with SystemOne track,refer to Special Instructions SEHS9350. (B) Torch off existing guards and rewelded at new location, order strips and hardware from thetable makes machine compatible with SystemOne track, refer to Special Instructions (SEHS9585). For general overview of SystemOneTrack Guiding Arrangements refer to Special Instructions REHS2104.

95


D6H XL, XW, IG SystemOne END GUIDING GUARDS 1

Metric Hardware


NUMBER

Front



Strip 2 255-7174

Bolt 12 8T-4184

Washer 12 8T-4223

Rear



Strip 4 255-7174

Bolt 16 8T-4184

Washer 16 8T-4223


D6H LGP SystemOne END GUIDING GUARDS 1

Metric Hardware


NUMBER

Front

Guard Assembly 2 9U-8451


Strip 4 255-7174

Bolt 16 8T-4184

Washer 16 8T-4223

Rear



Strip 4 255-7174

Bolt 16 8T-4184

Washer 16 8T-4223


96


D6H STD END GUIDING GUARDS 1

SEALED AND LUBRICATED, HEAVY DUTY, AND ROTATING BUSHING TRACK ONLY (INCH MOUNTINGHARDWARE)


NUMBER

Front



Bolt 16 8T-8919

Washer 16 8T-4223

Strip 4 9U-8456

Spacer 2 4 9U-8791

Rear



Bolt 16 8T-8919

Washer 16 5P-1076

Strip 4 9U-8456

Spacer 2 4 9U-8791

1 Refer to Special Instructions SEHS9585 and Technical Bulletin (TIB) dated August 17, 1994 for details.2 Required for Sealed and Lubricated Track for proper clearance.

D6H XR END GUIDING GUARDS 1



NUMBER

Front



Bolt 16 8T-8919

Washer 16 5P-1076

Strip 4 9U-8456

Spacer 2 4 9U-8791

Rear


Bolt 12 8T-8919

Washer 12 5P-1076

Strip 4 9U-9206

Spacer 2 4 9U-9209


97


D6H XL END GUIDING GUARDS 1



NUMBER

Front



Bolt 12 8T-8919

Washer 12 5P-1076

Strip 2 8E-9922

Strip 2 8E-9923

Spacer 2 4 6I-9024

Rear



Bolt 16 8T-8919

Washer 16 5P-1076

Strip 4 9U-8456

Spacer 2 4 9U-8791


D6H LGP END GUIDING GUARDS 1



NUMBER

Front



Bolt 16 5C-6565

Washer 16 8T-4223

Strip 4 9U-8456

Spacer 2 4 9U-8791

Rear



Bolt 16 5C-6565

Washer 16 8T-4223

Strip 4 9U-8456

Spacer 2 4 9U-8791


98


D6T, D6R STD SystemOne TRACK ROLLER GUARDS (FULL LENGTH)Metric Hardware


NUMBER

Guard 4 229-9556

Guard 4 229-9557

Tube 10 134-5366

Rod 10 134-5368

Nut 20 7Y-5233

Washer 20 8T-4167

Bolt (20 mm) 20 8T-4141

Spacer 20 166-2287

Plate 4 8E-9932

Bolt (12 mm) 4 8T-4956

Bolt (12 mm) 4 8T-4139

Washer 8 8T-4223

D6T, D6R XL, XW, IG SystemOne TRACK ROLLER GUARDS (FULL LENGTH)Metric Hardware


NUMBER

Guard 4 229-9558

Guard 4 229-9559

Tube 12 134-5366

Rod 12 134-5368

Nut 24 7Y-5233

Washer 24 8T-4167

Bolt (20 mm) 24 8T-4141

Spacer 24 166-2287

99


D6T, D6R LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)Metric Hardware


NUMBER

Guard 4 229-9568

Guard 4 229-9569

Tube 14 134-5366

Rod 14 134-5368

Nut 28 7Y-5233

Washer 28 8T-4167

Bolt (20 mm) 28 8T-4141

Spacer 28 166-2287

Plate 4 8E-9932

Bolt (12 mm) 4 8T-4956

Bolt (12 mm) 4 8T-4139

Washer 8 8T-4223

D6H STD SystemOne TRACK ROLLER GUARDS (FULL LENGTH)Inch Hardware


NUMBER

Guard 4 229-9556

Guard 4 229-9557

Tube 10 134-5366

Rod 10 134-5368

Nut 20 7Y-5233

Washer 20 8T-4167

Bolt (3/4") 20 8C-6857

Spacer 20 166-2287

Plate 4 8E-9932

Bolt (1/2") 4 8C-4436

Bolt (1/2") 4 5C-6565

Washer 8 8T-4223

100


D6H XL, XW, IG SystemOne TRACK ROLLER GUARDS (FULL LENGTH)Inch Hardware


NUMBER

Guard 4 229-9558

Guard 4 229-9559

Tube 12 134-5366

Rod 12 134-5368

Nut 24 7Y-5233

Washer 24 8T-4167

Bolt (3/4") 24 8C-6857

Spacer 24 166-2287

D6H LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)Inch Hardware


NUMBER

Guard 4 229-9568

Guard 4 229-9569

Tube 14 134-5366

Rod 14 134-5368

Nut 28 7Y-5233

Washer 28 8T-4167

Bolt (3/4") 28 8C-6857

Spacer 28 166-2287

Plate 4 8E-9932

Bolt (1/2") 4 8C-4436

Bolt (1/2") 4 5C-6565

Washer 8 8T-4223

101


D6T, D6R STD TRACK ROLLER GUARDS (FULL LENGTH)CAST HEAVY DUTY (METRIC MOUNTING HARDWARE)


NUMBER

Track Guide Kit 1 172-6219

Guard (RH Front) 2 134-5365

Guard (LH Rear) 2 134-5364

Guard (LH Front) 2 134-5364

Guard (RH Rear) 2 134-5365

Tube 10 134-5366

Rod 10 134-5368

Nut 20 7Y-5233

Washer 20 8T-4167

Bolt 20 8T-4141

Spacer 20 166-2287

Plate 4 8E-9932

Bolt 4 8T-4956

Bolt 4 8T-4139

Washer 4 8T-4223

D6R XR TRACK ROLLER GUARDS (FULL LENGTH)CAST HEAVY DUTY (METRIC MOUNTING HARDWARE)


NUMBER



Gueard (LH Rear) 2 134-9435



Tube 12 134-5366

Rod 12 134-5368

Nut 24 7Y-5233

Washer 24 8T-4167

Bolt 24 8T-4141

Spacer 24 166-2287

Plate 4 8E-9932

Bolt 4 8T-4956

Bolt 4 8T-4139

Washer 4 8T-4223

102


D6T XL/XW, D6R XL/XW TRACK ROLLER GUARDS (FULL LENGTH)CAST HEAVY DUTY (METRIC MOUNTING HARDWARE)


NUMBER






Tube 12 134-5366

Rod 12 134-5368

Nut 24 7Y-5233

Washer 24 8T-4167

Bolt 24 8T-4141

Spacer 24 166-2287

D6T, D6R LGP TRACK ROLLER GUARDS (FULL LENGTH)CAST HEAVY DUTY (METRIC MOUNTING HARDWARE)


NUMBER






Tube 14 134-5366

Rod 14 134-5368

Nut 28 7Y-5233

Washer 28 8T-4167

Bolt 28 8T-4141

Spacer 28 166-2287

Plate 4 8E-9932

Bolt 4 8T-4956

Bolt 4 8T-4139

Washer 4 8T-4223

103


D6H STD TRACK ROLLER GUARDS (FULL LENGTH)CAST HEAVY DUTY (INCH MOUNTING HARDWARE), FOR HEAVY DUTY AND ROTATING BUSHING TRACK


NUMBER





Tube 10 134-5366

Rod 10 134-5368

Nut 20 7Y-5233

Washer 20 8T-4167

Bolt 20 8C-6857

Spacer 20 166-2287

Plate 4 8E-9932

Bolt 4 8C-4436

Bolt 4 5C-6565

Washer 4 8T-4223

D6H XR TRACK ROLLER GUARDS (FULL LENGTH)CAST HEAVY DUTY (INCH MOUNTING HARDWARE), FOR HEAVY DUTY AND ROTATING BUSHING TRACK


NUMBER





Tube 12 134-5366

Rod 12 134-5368

Nut 24 7Y-5233

Washer 24 8T-4167

Bolt 24 8C-6857

Spacer 24 166-2287

Plate 4 8E-9932

Bolt 4 8C-4436

Bolt 4 5C-6565

Washer 4 8T-4223

104


D6H XL TRACK ROLLER GUARDS (FULL LENGTH)CAST HEAVY DUTY (INCH MOUNTING HARDWARE), FOR HEAVY DUTY AND ROTATING BUSHING TRACK


NUMBER





Tube 12 134-5366

Rod 12 134-5368

Nut 24 7Y-5233

Washer 24 8T-4167

Bolt 24 8C-6857

Spacer 24 166-2287

D6H LGP TRACK ROLLER GUARDS (FULL LENGTH)CAST HEAVY DUTY (INCH MOUNTING HARDWARE), FOR HEAVY DUTY AND ROTATING BUSHING TRACK


NUMBER





Tube 14 134-5366

Rod 14 134-5368

Nut 28 7Y-5233

Washer 28 8T-4167

Bolt 28 8C-6857

Spacer 28 166-2287

Plate 4 8E-9932

Bolt 4 8C-4436

Bolt 4 5C-6565

Washer 4 8T-4223

105


D6R STD TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)

NOT FOR NACD USE


NUMBER




Tube 6 7G-4355

Rod (threaded) (16 mm) 6 110-0771

Washer 12 9X-8257

Nut (16 mm) 12 8T-4778

Plate 4 8E-9932

Bolt (12 mm) 4 8T-4956

Bolt (12 mm) 4 8T-4139

Washer 4 8T-4223

D6R XR TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)

NOT FOR NACD USE


NUMBER





Tube 8 7G-4355

Rod (threaded) (16 mm) 8 110-0771

Washer 16 9X-8257

Nut (16 mm) 16 8T-4778

Plate 4 8E-9932

Bolt (12 mm) 4 8T-4956

Bolt (12 mm) 4 8T-4139

Washer 4 8T-4223

106


D6R XL TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)

NOT FOR NACD USE


NUMBER




Tube 8 7G-4355

Rod (threaded) (16 mm) 8 110-0771

Washer 16 9X-8257

Nut (16 mm) 16 8T-4778

D6R LGP TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)

NOT FOR NACD USE


NUMBER




Tube 8 7G-4355

Rod (threaded) (16 mm) 8 110-0771

Washer 16 9X-8257

Nut (16 mm) 16 8T-4778

Plate 4 8E-9932

Bolt (12 mm) 4 8T-4956

Bolt (12 mm) 4 8T-4139

Washer 4 8T-4223

107


D6R STD, D6H STD TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

NOT FOR NACD USE


NUMBER


Tube 4 7G-4355

Rod 4 3W-4144

Bolt 4 8C-4436

Bolt 20 8C-6857

Washer 8 8T-4122

Washer 4 8T-4223

Nut 8 6V-8181

Plate 4 8E-9932

Spacer 20 166-2287

Bolt 4 5C-6565

D6R XR, D6H XR TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

NOT FOR NACD USE


NUMBER



Tube 4 7G-4355

Rod 4 3W-4144

Bolt 4 8C-4436

Bolt 24 8C-6857

Washer 8 8T-4122

Washer 4 8T-4223

Nut 8 6V-8181

Plate 4 8E-9932

Spacer 24 166-2287

Bolt 4 5C-6565

108


D6R XL, D6H XL TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

NOT FOR NACD USE


NUMBER


Tube 4 7G-4355

Rod 4 3W-4144

Bolt 24 8C-6857

Washer 8 8T-4122

Nut 8 6V-8181

Spacer 24 166-2287

D6R LGP, D6H LGP TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

NOT FOR NACD USE


NUMBER


Tube 4 7G-4355

Rod 4 3W-4144

Bolt 4 8C-4436

Bolt 28 8C-6857

Washer 8 8T-4122

Washer 4 8T-4223

Nut 8 6V-8181

Plate 4 8E-9932

Spacer 28 166-2287

Bolt 4 5C-6565

109


D6H STD TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)


NUMBER


Tube 4 7G-4355

Rod 4 3W-4144

Bolt 4 5C-6565

Bolt 20 8C-6857

Washer 8 8T-4122

Washer 4 8T-4223

Nut 8 6V-8181

Plate 4 8E-9932

Spacer 20 166-2287

Bolt 4 8T-4835

D6H XR TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)


NUMBER



Tube 4 7G-4355

Rod 4 3W-4144

Bolt 4 8C-4436

Bolt 24 8C-6857

Washer 8 8T-4122

Washer 4 8T-4223

Nut 8 6V-8181

Plate 4 8E-9932

Spacer 24 166-2287

Bolt 4 5C-6565

D6H XL TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)


NUMBER


Tube 4 7G-4355

Rod 4 3W-4144

Bolt 24 8C-6857

Washer 8 8T-4122

Nut 8 6V-8181

Spacer 24 166-2287

110


D6H LGP TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)


NUMBER

Guard Assembly 4 3T-5128

Tube 4 7G-4355

Rod 4 3W-4144

Bolt 8 8C-4436

Bolt 28 8C-6857

Washer 8 8T-4122

Washer 12 8T-4223

Nut 8 6V-8181

Plate 4 8G-9824

Spacer 28 166-2287

D6T, D6R SystemOne CENTER GUIDING GUARDSSTD, XL, XW, IG, LGP

Metric Hardware


NUMBER


Bolt (20 mm) 8 8T-4141

Spacer 8 166-2287

D6H SystemOne CENTER GUIDING GUARDSSTD, XL, XW, IG, LGP

Inch Hardware


NUMBER


Bolt (3/4") 8 8C-6857

Spacer 8 166-2287

D6T, D6R STD/LGP/XL/XR/XW CENTER GUIDING GUARDSONE PIECE CAST HEAVY DUTY (METRIC MOUNTING HARDWARE)

PER MACHINE QUANTITYPART

NUMBER


Bolt (20 mm) 8 8T-4141

Spacer 8 166-2287

111


D6R STD/LGP/XL/XR/XW CENTER GUIDING GUARDSCAST HEAVY DUTY (METRIC MOUNTING HARDWARE)


NUMBER


Guards 2 164-0403 1

Guards 2 164-4611 1

Tube 4 134-5366

Rod 4 134-5368

Nut 8 7Y-5233

Washer 8 8T-4167

Bolt (20 mm) 8 8T-4141

Spacer 8 166-2287

1 Service replaced by 268-5645 Guard As.

D6H STD/LGP/XL/XR/XW CENTER GUIDING GUARDSONE PIECE CAST HEAVY DUTY (INCH MOUNTING HARDWARE)


NUMBER


Bolt (3/4") 8 8C-6857

Spacer 8 166-2287

D6H STD/LGP/XL/XR CENTER GUIDING GUARDSCAST HEAVY DUTY (INCH MOUNTING HARDWARE)


NUMBER

Guards 2 164-0403 1

Guards 2 164-4611 1

Tube 4 134-5366

Rod 4 134-5368

Nut 8 7Y-5233

Washer 8 8T-4167

Bolt (3/4") 8 8C-6857

Spacer 8 166-2287

1 Service replaced by 268-5945 Guard As.

112


D6R STD, LGP, XL, XR, XW CENTER GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK ONLY (FABRICATED, METRIC MOUNTING HARDWARE)

NOT FOR NACD USE


NUMBER


Bolt (20 mm) 8 8T-4141

Spacer 8 166-2287

D6H STD/LGP/XL/XR CENTER GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK ONLY (FABRICATED, INCH MOUNTING HARDWARE), NOT

FOR NACD USE


NUMBER


Bolt (3/4") 8 8C-6857

Spacer 8 166-2287

D6H STD/LGP/XL/XR CENTER GUIDING GUARDSSEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)


NUMBER


Bolt 8 8C-6857

Spacer 8 3P-4133

D6R XL, XW, IG SystemOne ROLLER END GUARDMounting position over number 2 and 6 track roller


NUMBER

Guard Assembly Front & Rear 4 310-4269

Bolt (12mm) 16 8T-4181

Spacer 16 166-2287

113

Elevated Sprocket TractorsD7R, D7H, 572R

D7R/H STD,XR,LGP; 572R HEAVY DUTY SEALED AND LUBRICATED TRACK 1

STD: 2EN1-UP, 2HR1-UP, 3ZR1-UP, 5BF5955-UP, 5MR1-UP, 79Z5895-UP, AEC1-UP, BRM1-UP, ACS1-UP,BRP1-UP

XR: 2EN1-UP, 2HR1-UP, 3ZR1-UP, 5BF5955-UP, 5MR1-UP, 79Z5895-UP, ADW1-UP, BPK1-UP, AGN1-UP,BPT1-UP

LGP & 572R: 3DN1-UP, 4FG5622-UP, 4SR1-UP, 6ER1-UP, 80Z5524-UP, 9HM1-UPAFG1-UP, BNM1-UP,ABJ1-UP, BNX1-UP, 2HZ1-UP, AAC1-UP

8.50" (215.9 mm) PITCH -- 7/8" BOLT

PARTNUMBER

Sec 40STD

Sec 41XR

Sec 43LGP Sec 46

Link Assembly -- (Quantity 2) 115-6301 115-6303 115-6302 123-8064 2

Track Links

RH Pin End Master 6I-9241 1 1 1 1

LH Pin End Master 6I-9242 1 1 1 1

RH Bushing End Master 6I-9243 1 1 1 1

LH Bushing End Master 6I-9244 1 1 1 1

RH Regular 6I-9239 39 40 42 45

LH Regular 6I-9240 39 40 42 45

Other Components

Pin 115-4923 40 41 43 46

Bushing 115-4924 40 41 43 46


Thrust Ring 152-8073 80 82 86 92

Stopper 7G-4332 40 41 43 46

Plug 6Y-0473 40 41 43 46

Track Hardware 3

Bolt 7H-3599 156 160 168 180

Bolt (Self-Cleaning Shoe) 7H-3599 -- -- 84 90

Bolt (Self-Cleaning Shoe) 116-8145 -- -- 84 90

Nut 2S-2140 156 160 168 180

Master Bolt 9W-9058 2 2 2 2

Master Bolt 6V-1723 2 2 2 2

Master Bolt (Self-Cleaning Shoe) 9W-9058 -- -- 2 2

Master Bolt (Self-Cleaning Shoe) 6V-1725 -- -- 2 2

Special Sets/Groups


Bushing and Seal Group (40 Sections) 128-5604 4 1 1 1 1

1 When installing Heavy Duty Track on machines prior to above serial number, refer to IRM UC95012 for installation and guardinginformation.2 For use the machine equipped with 9 roller track roller frame.3 Not part of link assembly; required to assemble track group.4 Service Replaced By: 272-7103.

114


D7R STD, D7H STD MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITYPART

NUMBER




D7R/D7H XR MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITYPART

NUMBER


Moderate Service -- 26" (660 mm) 2 115-6312


D7R/D7H LGP MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITYPART

NUMBER


Moderate Service -- 36" (915 mm) 2 115-6310

115


D7R/H STD,XR,LGP ROTATING BUSHING TRACK 1

STD: 2EN1-UP, 2HR1-UP, 3ZR1-UP, 5BF5955-UP, 5MR1-UP, 79Z5895-UP, AEC1-UP, BRM1-UP, ACS1-UP,BRP1-UP

XR: 2EN1-UP, 2HR1-UP, 3ZR1-UP, 5BF5955-UP, 5MR1-UP, 79Z5895-UP, ADW1-UP, BPK1-UP, AGN1-UP,BPT1-UP

LGP: 3DN1-UP, 4FG5622-UP, 4SR1-UP, 6ER1-UP, 80Z5524-UP, 9HM1-UP, AFG1-UP, BNM1-UP, ABJ1-UP,BNX1-UP

8.50" (215.9 mm) PITCH -- 7/8" BOLT

PARTNUMBER

STD40 Section

XR41 Section

LGP43 Section 46 Section

Link Assembly -- (Quantity 2) 152-8054 152-8057 152-8055 151-8863 2

Track Links

RH Pin End Master 6I-9241 1 1 1 1

LH Pin End Master 6I-9242 1 1 1 1

RH Bushing End Master 3 165-1760 1 1 1 1

LH Bushing End Master 3 165-1761 1 1 1 1

RH Regular 3 165-1758 39 40 42 45

LH Regular 3 165-1759 39 40 42 45

Other Components

Pin 152-8080 40 41 43 46

Bushing 165-1770 40 41 43 46


Thrust Ring 152-8073 160 164 172 184

Stopper 7G-4332 40 41 43 46

Plug 6Y-0473 40 41 43 46

Track Hardware 4

Bolt 7H-3599 156 160 168 180

Nut 2S-2140 156 160 168 180

Master Bolt 6V-1723 2 2 2 2

Master Bolt 9W-9058 2 2 2 2

1 Rotating Bushing Track is an application specific undercarriage designed for high abrassion/low impact applications (4,000 hour systemlife or less). When installing Rotating Bushing Track on existing machines, refer to IRM UC95-15 for installation and guardinginformation. Also refer to Special Instruction SEHS9919 for additional guarding information. For servicing information refer to SpecialInstruction SEHS9542. This product is not for use on Track Skidders and 561H Pipelayers.2 For use the machine equipped with 9 roller track roller frame.3 Joint assembly (Includes link and insert). Insert not serviced.4 Not part of link assembly; required to assemble track group.

116


D7H STD,XR,LGP HYBRID TRACKD7H STD (40 SECTION): 79Z1-5894, 5BF1-5954D7H XR (41 SECTION): 79Z1-5894, 5BF1-5954

D7H LGP (43 SECTION): 80Z1-5523, 4FG1-56218.50" (215.9 mm) PITCH -- 7/8" BOLT

PARTNUMBER

Sec 40STD

Sec 41XR

Sec 43LGP

Link Assembly -- (Quantity 2) 291-1612 1 291-1613 1 291-1615 1

Track Links





RH Regular 289-3083 39 40 42

LH Regular 289-3084 39 40 42

Other Components

Pin 199-2794 40 41 43

Bushing 237-3790 40 41 43


Thrust Ring 152-8073 80 82 86

Stopper 7G-4332 40 41 43

Plug 6Y-0473 40 41 43

Track Hardware 2

Bolt 7H-3599 156 160 168

Nut 7T-9825 156 160 168

Master Bolt 9W-9058 4 4 4

Special Sets/Groups



1 Track shoes with 7/8 bolts are required, refer to table titled "D7H Hybrid Track Shoes" for selections.2 Not part of link assembly; required to assemble track group.

117


D7H STD,XR,LGP SEALED AND LUBRICATED TRACKD7H STD (40 SECTION): 79Z1-5894, 5BF1-5954D7H XR (41 SECTION): 79Z1-5894, 5BF1-5954

D7H LGP (43 SECTION): 80Z1-5523, 4FG1-56218.50" (215.9 mm) PITCH -- 3/4" BOLT

PARTNUMBER

Sec 40STD

Sec 41XR

Sec 43LGP

Link Assembly (Quantity 2) -- 1 -- 2 -- 3

Track Links

RH Pin End Master 9G-2419 1 1 1

LH Pin End Master 9G-2420 1 1 1



RH Regular 9G-2417 39 40 42

LH Regular 9G-2418 39 40 42

Other Components

Pin 199-2794 40 41 43

Bushing 237-3790 40 41 43


Thrust Ring 152-8073 80 82 86

Stopper 7G-4332 40 41 43

Plug 6Y-0473 40 41 43

Track Hardware 4

Bolt 6V-1792 156 160 168



Nut 1S-1860 156 160 168

Master Bolt (Long) 2P-9670 2 2 2

Master Bolt (Short) 6V-1793 2 2 2


Master Bolt (Self-Cleaning Shoe) 6T-1441 2

Special Sets/Groups



1 Serviced replaced by hybrid link assembly 291-1612 and new track shoes with 7/8 bolts, refer to table titled "D7H Hybrid Track Shoes"for selections.2 Serviced replaced by hybrid link assembly 291-1613 and new track shoes with 7/8 bolts, refer to table titled "D7H Hybrid Track Shoes"for selections.3 Serviced replaced by hybrid link assembly 291-1615 and new track shoes with 7/8 bolts, refer to table titled "D7H Hybrid Track Shoes"for selections.4 Not part of link assembly; required to assemble track group.

118


D7R, D7H TRACK SHOESHEAVY DUTY AND ROTATING BUSHING TRACK

8.50" (215.9 mm) PITCH -- 7/8" BOLT

TYPE WIDTH

REGULARSHOE PART

NUMBER

TRAP HOLESHOE PART

NUMBER STD XR LGP

Extreme Service 20.0" (510 mm) 117-0756 -- Y Y N

Extreme Service 22.0" (560 mm) 7T-2750 330-7667 Y Y N

Extreme Service 24.0" (610 mm) 7T-5969 330-7668 Y Y N

Extreme Service 26.0" (660 mm) 1Q-4960 330-7669 Y Y N

Extreme Service 30.0" (760 mm) -- 330-7670 N N Y

Extreme Service 36.0" (915 mm) 247-0264 330-7671 N N Y

Moderate Service 22.0" (560 mm) 7T-0737 - Y Y N

Moderate Service 24.0" (610 mm) 7T-3940 9Z-9263 Y Y N

Moderate Service 26.0" (660 mm) 7T-5968 1Z-9974 Y Y N

Moderate Service 28.0" (710 mm) 7T-2282 9Z-9267 N N Y

Moderate Service 30.0" (760 mm) 115-7462 -- N N Y

Moderate Service 36.0" (915 mm) 6I-9912 -- N N Y

Double Grouser 20.0" (510 mm) 170-3823 -- Y Y N

Double Grouser 22.0" (560 mm) -- 129-9204 Y Y N

Double Grouser 27.0" (675 mm) 170-3827 -- N N Y

Self-Cleaning 36.0" (915 mm) 115-6315 -- N N Y

Chopper 24.0" (610 mm) -- 8E-9799 Y Y N

572R TRACK SHOESHEAVY DUTY TRACK

8.50" (215.9 mm) PITCH--7/8' BOLT

Type WIDTHPART

NUMBER

Moderate Service 26.0" (660mm) 7T-5968

Moderate Service 30.0" (760 mm) 115-7462

Moderate Service (Clip) 1 30.0" (760 mm) 8E-9399

1 Clipped grouser edges; reduces snag loading.

119


D7H HYBRID TRACK SHOES8.50" (215.9 mm) PITCH -- 7/8" BOLT

TYPE WIDTH

REGULARSHOE PART

NUMBER

MASTERSHOE PART

NUMBER STD XR LGP

Extreme Service 20.0" (510 mm) 1Q-4918 1Q-4919 Y Y N

Extreme Service (Trapezoidal Opening) 20.0" (510 mm) 1Q-4689 1Q-4690 Y Y N


Extreme Service 24.0" (610 mm) 243-5730 243-5731 Y Y N


Extreme Service (Trapezoidal) 26.5" (675 mm) 125-9087 125-9088 Y Y N

Moderate Service (Trapezoidal Opening) 20.0" (510 mm) 1Q-4965 1Q-4964 Y Y N

Moderate Service 22.0" (560 mm) 243-5728 243-5729 Y Y N



Moderate Service 30.0" (760 mm) 243-5734 243-5735 N N Y

Moderate Service 36.0" (915 mm) 243-5736 243-5737 N N Y

Double Grouser 20.0" (510 mm) 8E-4416 8E-4417 Y Y N

Double Grouser 24.0" (610 mm) 8E-4427 1Q-4669 Y N N

Chopper (Trapezoidal Opening) 20.0" (510 mm) 8E-8323 8E-8324 Y Y N

D7R, D7H, 572R SPROCKETS


NUMBER


Bolt 25 5P-7665

Nut 25 7H-3608

Washer 25 6V-5841

120


D7R STD/LGP, D7H STD/LGP, 572R IDLERSSYMMETRIC SEAL, 12 BOLT RETAINER


FABRICATEDDESIGN PART

NUMBER

CAST SINGLEWEB DESIGN

PART NUMBER

Group (Large Tread Diameter 628 mm) 4 - 1 192-0216

Components of Group

Idler Assembly 1 192-0219 192-0215

Bearing 2 2 6Y-1757 6Y-1757

Shaft 1 131-3935 131-3935

Collar 2 107-3945 107-3945

Retainer 2 192-0213 192-0213

Thrust Washer 3 1 8E-6619 8E-6619

Bolt 24 5P-9681 5P-9681

Washer 24 3K-6113 3K-6113

Seal -- Duo-Cone Group (Symmetric) 2 162-7862 162-7862

Toric Ring 2 2 162-2166 162-2166


Seal -- Collar 2 7J-2036 7J-2036

Stopper 1 9G-5664 9G-5664

Plug 1 6Y-0473 6Y-0473

Mounting Hardware 4


Block 2 8E-8648 8E-8648

Bolt (7/8") (D7R) 4 9S-1322 9S-1322

Bolt (7/8") (D7H) 4 1D-4634 1D-4634

Washer 4 5P-8249 5P-8249

Shim D7R (Front Idlers Only) 2 131-8207 131-8207



Toric Ring 2 2 9M-9730 9M-9730

1 Order 192-0216 Idler Group.2 Component of preceding assembly or group; quantity shown is per assembly or group.3 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and(4) 2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 and 8E-6619 Thrust Washers.See Special Instruction SEHS8515.4 These components are not part of Idler Group; quantities required to mount each idler.

121


D7R STD/LGP, D7H STD/LGP, 572R IDLERSSYMMETRIC SEAL, 8 BOLT RETAINER



NUMBER


PART NUMBER

Group (Large Tread Diameter 628 mm) 4 -- 1 -- 2

Components of Group

Idler Assembly 1 -- 3 -- 4

Bearing 5 2 6Y-1757 6Y-1757

Shaft 1 131-3935 131-3935

Collar 2 107-3945 107-3945

Retainer 2 131-3932 131-3932


Bolt 16 0T-0320 0T-0320

Washer 16 3K-6113 3K-6113


Toric Ring 5 2 162-2166 162-2166


Seal -- Collar 2 7J-2036 7J-2036

Stopper 1 9G-5664 9G-5664

Plug 1 6Y-0473 6Y-0473

Mounting Hardware 7


Block 2 8E-8648 8E-8648

Bolt (7/8") (D7R) 4 9S-1322 9S-1322

Bolt (7/8") (D7H) 4 1D-4634 1D-4634

Washer 4 5P-8249 5P-8249

Shim D7R (Front Idlers Only) 2 131-8207 131-8207



Toric Ring 5 2 9M-9730 9M-9730

1 Idler Group 161-5792 replaced by 192-0220. Idler Group 192-0220 not serviced, order 192-0216 Idler Group.2 Idler Group 159-2086 replaced by 192-0216.3 Idler Assembly 6Y-2033 replaced by (1) 192-0219 Idler Assembly, (2) 192-0213 Retainer and (24) 5P-9681 Bolts.4 Idler Assembly 159-2084 replaced by (1) 192-0215 Idler Assembly, (2) 192-0213 Retainer and (24) 5P-9681 Bolts.5 Component of preceding assembly or group; quantity shown is per assembly or group.6 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and(4) 2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 and 8E-6619 Thrust Washers.See Special Instruction SEHS8515.7 These components are not part of Idler Group; quantities required to mount each idler.

122


D7R D7H, XR IDLERSSYMMETRIC SEAL, 12 BOLT RETAINER



NUMBER

Group (Small Tread Diameter 585 mm) 4 192-0224

Components of Group


Bearing 1 2 6Y-1757

Shaft 1 131-3935

Collar 2 107-3945

Retainer 2 192-0213

Thrust Washer 2 1 8E-6619

Bolt 24 5P-9681

Washer 24 3K-6113


Toric Ring 1 2 162-2166



Stopper 1 9G-5664

Plug 1 6Y-0473

Mounting Hardware 3

End Cap (Abutment Style) 2 131-1647

Block 2 165-6942

Bolt (7/8") 4 1D-5976

Washer 4 5P-8249

Shim (D7R Front Idlers Only) 2 131-8207




1 Component of preceding assembly or group; quantity shown is per assembly or group.2 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and(4) 2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 and 8E-6619 Thrust Washers.See Special Instruction SEHS8515.3 These components are not part of Idler Group; quantities required to mount each idler.

123


D7R D7H, XR IDLERSSYMMETRIC SEAL, 8 BOLT RETAINER



NUMBER

Group (Small Tread Diameter 585 mm) 4 -- 1

Components of Group

Idler Assembly 1 -- 2

Bearing 3 2 6Y-1757

Shaft 1 131-3935

Collar 2 107-3945

Retainer 2 131-3932


Bolt 16 0T-0320

Washer 16 3K-6113


Toric Ring 3 2 162-2166



Stopper 1 9G-5664

Plug 1 6Y-0473

Mounting Hardware 5


Block 2 165-6942

Bolt (7/8") 4 1D-5976

Washer 4 5P-8249





1 Idler Group 135-9896 replaced by 192-0224.2 Idler Assembly 6Y-2030 replaced by (1) 192-0223 Idler Assembly, (2) 192-0213 Retainer, and (24) 5P-9681 Bolts.3 Component of preceding assembly or group; quantity shown is per assembly or group.4 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and(4) 2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 and 8E-6619 Thrust Washers.See Special Instruction SEHS8515.5 These components are not part of Idler Group; quantities required to mount each idler.

124


D7R STD/LGP, D7H STD/LGP, LANDFILL/SPECIAL APPLICATION IDLERSSYMMETRIC SEAL, 12 BOLT RETAINER



PART NUMBER

Group 4 197-7754

Components of Group


Bearing 1 2 6Y-1757

Shaft 1 131-3935

Collar 2 166-3317

Retainer 2 197-7752


Bolt 24 6K-3772

Washer 24 3K-6113

Plate 2 197-7753


Toric Ring 1 2 162-2166



Stopper 1 9G-5664

Plug 1 6Y-0473

Mounting Hardware 3


Block 2 8E-8648

Bolt (7/8") (D7R) 4 9S-1322

Bolt (7/8") (D7H) 4 1D-4634

Washer 4 5P-8249

Shim D7R (Front Idlers Only) 2 131-8207





125


D7R STD, D7R LGP, D7H STD, D7H LGP LANDFILL/SPECIAL APPLICATION IDLERSSYMMETRIC SEAL, 8 BOLT RETAINER



PART NUMBER

Group 4 -- 1

Components of Group


Bearing 3 2 6Y-1757

Shaft 1 131-3935

Collar 2 166-3317

Retainer 2 166-3316


Bolt 16 8C-6877

Washer 16 8T-5360

Plate 2 166-3315

Seal 2 166-3318


Toric Ring 3 2 162-2166



Stopper 1 9G-5664

Plug 1 6Y-0473

Mounting Hardware 5


Block 2 8E-8648

Bolt (7/8") (D7R) 4 9S-1322

Bolt (7/8") (D7H) 4 1D-4634

Washer 4 5P-8249

Shim D7R (Front Idlers Only) 2 131-8207




1 Idler Group 166-4429 replaced by 197-7754.2 Idler Assembly 159-2084 replaced by (1) 192-0215 Idler Assembly, (2) 197-7752 Retainer, (2) 197-7753 Plates, (24) 6K-3772 Bolts, (24)3K-6113 Washer.3 Component of preceding assembly or group; quantity shown is per assembly or group.4 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and(4) 2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 and 8E-6619 Thrust Washers.See Special Instruction SEHS8515.5 These components are not part of Idler Group; quantities required to mount each idler.

126


D7R D7H, XR LANDFILL/SPECIAL APPLICATION IDLERSSYMMETRIC SEAL, 12 BOLT RETAINER



NUMBER

Group 4 198-6726

Components of Group


Bearing 1 2 6Y-1757

Shaft 1 131-3935

Collar 2 166-3317

Retainer 2 197-7752


Bolt 24 6K-3772

Washer 24 3K-6113

Plate 2 197-7753

Seal 4 166-3318


Toric Ring 1 2 162-2166



Stopper 1 9G-5664

Plug 1 6Y-0473

Mounting Hardware 3


Block 2 165-6942

Bolt (7/8") 4 1D-5976

Washer 4 5P-8249






127


D7R D7H, XR LANDFILL/SPECIAL APPLICATION IDLERSSYMMETRIC SEAL DESIGN, 8 BOLT RETAINER



NUMBER

Group 4 -- 1

Components of Group


Bearing 3 2 6Y-1757

Shaft 1 131-3935

Collar 2 166-3317

Retainer 2 166-3316


Bolt 24 8C-6877

Washer 24 8T-5360

Plate 2 166-3315

Seal 4 166-3318


Toric Ring 3 2 162-2166



Stopper 1 9G-5664

Plug 1 6Y-0473

Mounting Hardware 5


Block 2 165-6942

Bolt (7/8") 4 1D-5976

Washer 4 5P-8249





1 Idler Group 170-1104 replaced by 198-67262 Idler Assembly 6Y-2030 replaced by (1) 192-0223 Idler Assembly, (2) 197-7752 Retainer, (2) 197-7753 Plate, (24) 6K3772 Bolts, (24) 3K6113Washers.3 Component of preceding assembly or group; quantity shown is per assembly or group.4 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and (4)2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 and 8E-6619 Thrust Washers. SeeSpecial Instruction SEHS8515.5 These components are not part of Idler Group; quantities required to mount each idler.

128


D7R, D7H CENTER TREAD IDLER 1

12 BOLT RETAINERUSE WITH ROTATING BUSHING TRACK


NUMBER

Group 4 249-2939 2

Components of Group


Bearing 4 2 6Y-1757

Shaft 1 131-3935

Retainer 2 192-0213 5

Thrust Washer 2 8E-6619

Collar 2 107-3945

Bolt 24 5P-9681

Washer 24 3K-6113


Toric Ring 4 2 162-2166



Stopper 1 9G-5664

Plug 1 6Y-0473

Mounting Hardware D7H STD, LGP 6

End Cap (Abutment Style)(RH) 1 173-7653

End Cap (Abutment Style)(LH) 1 173-7652

Block (RH) 1 173-7656

Block (LH) 1 173-7657

Shim 2 173-7660

Bolt (7/8") 4 9S-1322

Washer (7/8") 4 5P-8249

Mounting Hardware D7R STD, LGP 6

End Cap (Abutment Style)(RH) 1 173-7653

End Cap (Abutment Style)(LH) 1 173-7652

Block (RH) 1 173-7658

Block (LH) 1 173-7659

Shim (Rear) 2 192-0811

Shim (Front) 2 173-7660

Bolt (7/8") 4 6J-1536

Washer (7/8") 4 5P-8249

1 Complete kits available for machine retrofit: D7H STD (164-3335), D7H LGP (164-3336), D7R STD (169-4234), D7R LGP (169-4236).2 Idler Group 166-8357 replaced by 249-2939.3 Idler Assembly 166-8358 replaced by (1) 249-2940 Idler Assembly, (2) 192-0213 Retainer, (24) 5P9681 Bolt, (24) 3K6113 Washer.4 Component of preceding assembly or group; quantity shown is per assembly or group.5 If 8 bolt retainer is required order 131-3932.6 These components are not part of Idler Group; quantities required to mount each idler.

129


D7R D7H, LGP IDLERS9 ROLLER FRAME


FORMERPART

NUMBERPART

NUMBER

Group (Tread Diameter 605 mm) 4 -- --

Components of Group


Bearing 2 2 6Y-1757 6Y-1757

Shaft 1 6Y-1756 131-3935

Retainer Assembly 2 -- --

Retainer 2 108-0041 131-3932

Thrust Washer 2 8E-6619 8E-6619

Collar 2 -- 107-3945

Bolt 16 4F-8965 0T-0320

Washer 16 -- 3K-6113


Seal -- Duo-Cone Group (Symmetric) 2 -- 162-7862

Toric Ring 2 2 -- 162-2166

Seal -- Duo-Cone Group (Inverted) 2 7T-0158 --


O-Ring 2 1 6V-2701 --



Stopper 1 9G-5664 9G-5664

Plug 1 6Y-0473 6Y-0473

Mounting Hardware 3

End Cap 2 131-1647 131-1647

Block (Front Idler) 2 8E-8648 8E-8648

Block (Rear Idler) 2 6Z-8243 6Z-8243

Bolt (Front) 4 1D-4634 1D-4634

Bolt (Rear) 4 9S-1322 9S-1322

Washer 4 5P-8249 5P-8249

1 Idler Assembly 3Q-3873 Replaced by (1) 195-9816 Idler Assembly, (2) 192-0213 Retainers, (24) 5P-9681 Bolt, (24) 3K-6113 Washer2 Component of preceding assembly or group; quantity shown is per assembly or group.3 These components are not part of Idler Group; quantities required to mount each idler.

130


D7H STD/LGP IDLERSFORMER DESIGN, LARGE TREAD DIAMETER, LARGE BEARING



NUMBER


PART NUMBER

Group (Tread Diameter 628 mm) 4 -- --

Components of Group


Bearing 3 2 6Y-1757 6Y-1757

Shaft 1 6Y-1756 6Y-1756

Retainer 2 108-0041 108-0041


Bolt 16 0T-0320 0T-0320

Washer 16 3K-6113 3K-6113


Seal -- Duo-Cone Group (Inverted) 2 7T-0158 7T-0158

Toric Ring 3 1 6P-8912 6P-8912

O-Ring 3 1 6V-2701 6V-2701


Stopper 1 9G-5664 9G-5664

Plug 1 6Y-0473 6Y-0473

Mounting Hardware 5


Block 2 8E-8648 8E-8648

Bolt (7/8") (D7R) 4 9S-1322 9S-1322

Bolt (7/8") (D7H) 4 1D-4634 1D-4634

Washer 4 5P-8249 5P-8249



Toric Ring 3 1 7T-1094 7T-1094

O-Ring 3 1 6V-2701 6V-2701

1 Idler Assembly 6Y-2033 Replaced by (1) 192-0219 Idler Assembly, (2) 192-0213 Retainer and (24) 5P-9681 Bolts.2 Idler Assembly 159-2084 Replaced by (1) 192-0215 Idler Assembly, (2) 192-0213 Retainer and (24) 5P-9681 Bolts.3 Component of preceding assembly or group; quantity shown is per assembly or group.4 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and(4) 2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 and 8E-6619 Thrust Washers.See Special Instruction SEHS8515.5 These components are not part of Idler Group; quantities required to mount each idler.

131


D7H XR IDLERSFORMER DESIGN, SMALL TREAD DIAMETER, LARGE BEARING



NUMBER

Group (Tread Diameter 585 mm) 4 --

Components of Group


Bearing 2 2 6Y-1757

Shaft 1 6Y-1756

Retainer 2 108-0041


Bolt 16 0T-0320

Washer 16 3K-6113




O-Ring 2 1 6V-2701


Stopper 1 9G-5664

Plug 1 6Y-0473

Mounting Hardware 4


Block 2 165-6942

Bolt (7/8") 4 1D-5976

Washer 4 5P-8249




O-Ring 2 1 6V-2701

1 Idler Assembly 6Y-2030 Replaced by (1) 192-0223 Idler Assembly, (2) 192-0213 Retainer and (24) 5P-9681 Bolts.2 Component of preceding assembly or group; quantity shown is per assembly or group.3 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and(4) 2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 and 8E-6619 Thrust Washers.See Special Instruction SEHS8515.4 These components are not part of Idler Group; quantities required to mount each idler.

132


D7H STD/LGP/XR IDLERSEARLY DESIGN, SMALL BEARING



NUMBER

Group 4 --

Components of Group

Idler Assembly 1 --

Bearing 1 2 --

Shaft 1 6T-1355

Retainer 2 9G-9344


Bolt 24 1T-0720

Washer 24 5M-2894




O-Ring 1 1 6V-2701

Seal -- Retainer 2 5F-3106

Stopper 1 9G-5664

Plug 1 6Y-0473

Mounting Hardware 3


Block 2 8E-8648

Bolt (7/8") 4 1D-4634

Washer 4 5P-8249




O-Ring 1 1 6V-2701


133


D7R, D7H, 572R CARRIER ROLLERS


NUMBER

Group 2 1P-8717

Components of Group

Roller Shell 1 1P-8716

Shaft 1 1P-8715

Cup 2 9S-3581

Cone 2 9S-3582

Ring 1 7H-4574

Cover 1 5M-2043


Plug 1 2P-0347

Bolt 3 0S-1594

Seal -- Duo-Cone Group 1 6Y-0925





Special Application Groups

Group (Steel Mill) 4 2P-3514

Seal -- Duo-Cone Group (Steel Mill) 1 4S-8984


Group (Arctic) 4 255-8882

Seal -- Duo-Cone Group (Arctic) 1 171-5882

Toric Ring 1 2 162-2166


134


D7R D7H STD/LGP/XR, 572R TRACK ROLLERSCURRENT DESIGN (END COLLARS, SYMMETRIC SEALS)


NUMBER



Double Flange (DF) - Tall Flange -- 4 231-3092 5

Components of Group



Roller Shell (Tall Flange, DF) 1 124-8259 5


Shaft 1 118-1628





Toric Ring 6 2 162-2166

Bushing O-Ring 2 4H-9105

Shaft O-Ring 2 8F-6711

Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 7

Bolt (7/8") 4 1D-4629

Washer 4 9H-1031

Special Application Roller Groups

Double Flange (DF) (Arctic) 6 1 248-5317 8

Single Flange (SF) (Arctic) 8 248-5319 9


Toric Ring 6 2 162-2166



Bushing O-Ring (Steel Mill) 2 9M-9729

Shaft O-Ring (Steel Mill) 2 8M-4390

Stopper (Steel Mill) 2 3T-3800

Plug (Steel Mill) 2 3T-3799

1 8 DF Roller Groups required on XR machines.2 Serviced Replaced By: 1 - Roller Group (DF) 323-5928, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.3 Serviced Replaced By: 1 - Roller Group (SF) 323-5925, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.4 Optional DF roller for guiding: use quantity required for specific roller frame type.5 Serviced Replaced By: 1 - Roller Group (DF) 323-5931, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.6 Component of preceding assembly or group; quantity shown is per assembly or group.7 These components are not included in the roller group. Quantities shown are required to mount each roller.8 Serviced Replaced By: 1 - Roller Group (DF) 339-6073, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.9 Serviced Replaced By: 1 - Roller Group (SF) 339-6072, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.

135


D7H STD/LGP/XR TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER)


NUMBER



Components of Group

Roller Shell (DF) 1 9W-5581 2

Roller Shell (SF) 1 9W-5582 3

Bearing 4 2 9W-9498

Shaft 1 3T-7392

Retainer 2 9W-6632


Bolt (Retainer) 12 0S-1595

Washer (Retainer) 12 5P-8245




O-Ring 4 1 6V-2701


Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 6

End Cap 2 6T-5114

Bolt (7/8") 4 2H-3856

Washer 4 4M-6953




O-Ring 4 1 6V-2701

Retainer O-Ring 2 4S-5898

Stopper 2 3T-3800

Plug 2 3T-3799

1 8 DF Roller Groups required on XR machines.2 Serviced Replaced By: 1 - Roller Group (DF) 323-5928, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.3 Serviced Replaced By: 1 - Roller Group (SF) 323-5925, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.4 Component of preceding assembly or group; quantity shown is per assembly or group.5 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and(4) 2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 Thrust Washer. See SpecialInstruction SEHS8515.6 These components are not included in the roller group. Quantities shown are required to mount each roller.

136


D7R, D7H END GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK (STD, XR, LGP)


NUMBER

Front (Guard Assembly)

Right Outer, Left Inner 2 165-7574

Left Outer, Right Inner 2 165-7576


Bolt 12 7X-0343

Washer 12 8T-4122

Rear (Guard Assembly)




Bolt 12 7X-0343

Washer 12 8T-4122

D7H END GUIDING GUARDSSEALED AND LUBRICATED TRACK (STD, XR, LGP)


NUMBER


Right Outer, Left Inner 2 3T-7192

Left Outer, Right Inner 2 3T-7195

Wear Strip 2 3T-7710


Bolt 12 7X-0343

Washer 12 8T-4122


Right Outer, Left Inner 2 3T-7192

Left Outer, Right Inner 2 3T-7195



Bolt 12 7X-0343

Washer 12 8T-4122

137


D7R/D7H STD TRACK ROLLER GUARDS (FULL LENGTH - CAST HEAVY DUTY)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY


NUMBER






Tube 12 165-3663

Rod 12 165-3664

Nut 24 7D-8508

Washer 24 8C-6913

Bolt 24 7X-0383

Spacer 24 178-7195

Bolt 8 5C-6565

Washer 8 7X-0590

D7R/D7H XR TRACK ROLLER GUARDS (FULL LENGTH - CAST HEAVY DUTY)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY


NUMBER






Tube 14 165-3663

Rod 14 165-3664

Nut 28 7D-8508

Washer 28 8C-6913

Bolt 28 7X-0383

Spacer 28 178-7195

Bolt 8 5C-6565

Washer 8 7X-0590

138


D7R/H LGP, 572R TRACK ROLLER GUARDS (FULL LENGTH - CAST HD)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY


NUMBER





Guard (LH Rear 2 169-0162

Tube 12 165-3663

Rod 12 165-3664

Nut 24 7D-8508

Washer 24 8C-6913

Bolt 24 7X-0383

Spacer 24 178-7195

Bolt 8 5C-6565

Washer 8 7X-0590

D7R/D7H STD TRACK ROLLER GUARDS (FULL LENGTH)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY

NOT FOR NACD USE


NUMBER


Tube 12 111-0428

Rod 12 111-0429

Bolt 8 5C-6565

Bolt 24 7X-0383

Washer 8 7X-0590

Washer 24 8C-6913

Spacer 24 178-7195

Nut 24 7D-8508

139


D7R/D7H XR TRACK ROLLER GUARDS (FULL LENGTH)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY

NOT FOR NACD USE


NUMBER


Tube 12 111-0428

Rod 12 111-0429

Bolt 8 5C-6565

Bolt 28 7X-0383

Washer 8 7X-0590

Washer 24 8C-6913

Spacer 28 178-7195

Nut 24 7D-8508

D7R/D7H LGP TRACK ROLLER GUARDS (FULL LENGTH)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY

NOT FOR NACD USE


NUMBER


Tube 12 111-0428

Rod 12 111-0429

Bolt 8 5C-6565

Bolt 24 7X-0383

Washer 8 7X-0590

Washer 24 8C-6913

Spacer 24 178-7195

Nut 24 7D-8508

D7H STD TRACK ROLLER GUARDS (FULL LENGTH)SEALED AND LUBRICATED TRACK


NUMBER

Guard Assembly 4 9W-3550

Tube 12 2F-0025

Rod 12 8H-1383

Bolt 8 5C-6565

Bolt 24 7X-0383

Washer 8 7X-0590

Washer 24 8C-6913

Spacer 24 178-7195

Nut 12 7D-8508

140


D7H XR TRACK ROLLER GUARDS (FULL LENGTH)SEALED AND LUBRICATED TRACK


NUMBER


Tube 14 2F-0025

Rod 14 8H-1383

Bolt 8 5C-6565

Bolt 28 7X-0383

Washer 8 7X-0590

Washer 28 8C-6913

Spacer 28 178-7195

Nut 14 7D-8508

D7H LGP TRACK ROLLER GUARDS (FULL LENGTH)SEALED AND LUBRICATED TRACK


NUMBER


Tube 12 2F-0025

Rod 12 8H-1383

Bolt 8 5C-6565

Bolt 24 7X-0383

Washer 8 7X-0590

Washer 24 8C-6913

Spacer 24 178-7195

Nut 12 7D-8508

D7R STD/LGP, D7H STD/LGP 572R CENTER GUIDING GUARDSCAST HEAVY DUTY, FOR HEAVY DUTY AND ROTATING BUSHING TRACK USE ONLY


NUMBER



Tube 4 165-3663

Rod 4 165-3664

Bolt 8 7X-0383

Washer 8 8C-6913

Nut 8 7D-8508

Spacer 8 178-7195

141


D7R/D7H XR CENTER GUIDING GUARDSCAST HEAVY DUTY, FOR HEAVY DUTY AND ROTATING BUSHING TRACK USE ONLY


NUMBER



Tube 6 165-3663

Rod 6 165-3664

Bolt 12 7X-0383

Washer 12 8C-6913

Nut 12 7D-8508

Spacer 12 178-7195

D7R STD/LGP, D7H STD/LGP CENTER GUIDING GUARDSFABRICATED, FOR HEAVY DUTY AND ROTATING BUSHING TRACK USE ONLY

NOT FOR NACD USE


NUMBER


Tube 4 111-0428

Rod 4 111-0429

Bolt 8 7X-0383

Washer 8 8C-6913

Nut 8 7D-8508

Spacer 8 178-7195

D7R/D7H XR CENTER GUIDING GUARDSFABRICATED, FOR HEAVY DUTY AND ROTATING BUSHING TRACK USE ONLY

NOT FOR NACD USE


NUMBER


Tube 6 111-0428

Rod 6 111-0429

Bolt 12 7X-0383

Washer 12 8C-6913

Nut 12 7D-8508

Spacer 12 178-7195

142


D7H STD/LGP CENTER GUIDING GUARDSSEALED AND LUBRICATED TRACK


NUMBER


Tube 4 2F-0025

Rod Assembly 4 -- 1

Bolt 8 7X-0383

Washer 8 8C-6913

Nut 4 7D-8508

Spacer 8 178-7195

1 Rod Assembly 8H1384 serviced by (1) 8H1383 Rod and (1) 1B4208 Nut.

D7H XR CENTER GUIDING GUARDSSEALED AND LUBRICATED TRACK


NUMBER


Tube 6 2F-0025

Rod Assembly 6 -- 1

Bolt 12 7X-0383

Washer 12 8C-6913

Nut 6 7D-8508

Spacer 12 178-7195

1 Rod Assembly 8H1384 serviced by (1) 8H1383 Rod and (1) 1B4208 Nut.

143

Elevated Sprocket TractorsD8T, D8R, D8N, 587T, 587R, 583T, 583R, 578

D8T, D8R, D8N TRACKPOSITIVE PIN RETENTION (PPR) TRACK

7XM, 1XJ, 9TC, 5TJ, 9EM, 6YZ, AKA, KPZ, J8B8.50" (215.9 mm) PITCH -- 7/8" BOLT

QUANTITYPART

NUMBER

Link Assembly -- 44 Section 2 272-6009

Track Links







Other Components

Pin 44 7T-7054

Bushing 44 6Y-3914

Retainer Ring (PPR) 88 6Y-0469

Seal Assembly (Rigid) 88 239-7943

Thrust Ring 88 152-8073

Stopper 44 7G-4332

Plug 44 6Y-0473

Track Hardware 1

Bolt 172 6V-1723

Nut 172 7G-6442

Master Bolt (Long) 2 6V-1725

Master Bolt (Short) 2 6V-1724

Special Set/Group

Seal Set (90 Seal Assemblies) 1 272-6013

Bushing and Seal Group (45 Sections) 1 5Y-2373

Retainer Ring Group (98 Retaining Rings) 1 6Y-1081

Facing Group 2 1 9W-9675

1 Not part of link assembly; required to assemble track group.2 Contains 400 facing rings to service 2 tracks.

144


D8T, D8R, D8N MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

PPR TRACK

QUANTITYPART

NUMBER


Super Extreme Service Shoe --24" (610 mm) 2 205-5796



Extreme Service Shoe -- 24" (610 mm) (Trap) 2 159-8862



D8T, D8R, D8N TRACKNON-POSITIVE PIN RETENTION (NON-PPR) TRACK

7XM, 1XJ, 9TC, 5TJ, 9EM, 6YZ, AKA, KPZ, J8B8.50" (215.9 mm) PITCH -- 7/8" BOLT

QUANTITYPART

NUMBER


Track Links







Other Components

Pin 43 199-2794

Master Pin 1 9W-5588

Bushing 44 6Y-3914

Retaining Ring 2 3T-9118



Stopper 44 7G-4332

Plug 44 6Y-0473

Track Hardware 1

Bolt 172 6V-1723

Nut 172 7G-6442



Special Set/Group


Bushing & Seal Group (45 Sections) 1 5Y-2373

1 Not part of link assembly: required to assemble track group.

145



Non PPR TRACK

QUANTITYPART

NUMBER


Extreme Service Shoe -- 22" (560 mm) 2 8E-7700

Extreme Service Shoe -- 24" (610 mm) 2 6Y-4124

Moderate Service Shoe -- 28" (710 mm) 2 8E-7699

D8T, D8R, D8N SystemOne TRACK7XM, 1XJ, 9TC, 5TJ, 9EM, 6YZ, AKA, KPZ, J8B

8.58" (218.0 mm) PITCH -- 7/8" BOLT

QUANTITYPART

NUMBER



Link Box Standard 20 318-5033

Link Box (Shoe End Masters) 1 321-2018

Link Box (Rail End Masters) 1 321-2019

Standard Link (Outer) 42 304-5680

Track Hardware 1

Bolt 172 6V-1723

Nut 172 273-8806

Master Bolt 4 6V-1725


D8T, D8R, D8N MADE TO ORDER (MTO) SystemOne TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITYPART

NUMBER


Super Extreme Service Shoe --24" (610 mm) 2 276-0550




146


587T, 587R, 583T, 583R, 578 PIPELAYER TRACKPOSITIVE PIN RETENTION (PPR) TRACK

587T/R, 583T/R (47 SECTION): FAT, BXL, CMX, 2XS578 (49 SECTION): 8HB

8.50" (215.9 mm) PITCH -- 7/8" BOLT

PARTNUMBER

587T/R,583T/R

47 Section578

49 Section

Link Assembly -- 47 Section 136-6713 6I-8839

Track Links

RH Pin End Master 8E-4061 1 1

LH Pin End Master 8E-4062 1 1

RH Bushing End Master 8E-4457 1 1

LH Bushing End Master 8E-4458 1 1

RH Regular 8E-4513 46 48

LH Regular 8E-4514 46 48

Other Components

Pin 7T-7054 47 49

Bushing 6Y-3914 47 49


Thrust Ring 152-8073 94 98

Retaining Ring (PPR) 6Y-0469 94 98

Stopper 7G-4332 47 49

Plug 6Y-0473 47 49

Track Hardware 1

Bolt 6V-1723 184 192

Nut 7G-6442 184 192

Master Bolt (Long) 6V-1725 2 2

Master Bolt (Short) 6V-1724 2 2

Special Set/Group


Bushing and Seal Group (45 Sections) 5Y-2373 1 1

Retaining Ring Group (98 Retaining Rings) 6Y-1081 1 1

Facing Group 2 9W-9675 1 1

1 Not part of link assembly; required to assemble track group.2 Contains 400 facing rings to service 2 tracks.

147


D8T, D8R, D8N TRACK SHOES8.50" (215.9 mm) PITCH -- 7/8" BOLT

TYPE WIDTHPART

NUMBER

Super Extreme Service 24.0" (610 mm) 317-1030

Super Extreme Service (Trapezoidal Opening) 26.0" (660 mm) 317-1031

Extreme Service 22.0" (560 mm) 7T-2390

Extreme Service (Trapezoidal Opening) 22.0" (560 mm) 329-9268





Extreme Service 27.6" (700 mm) 200-4074


Extreme Service 1 38.0" (965 mm) 191-0921

Extreme Service (Trapezoidal Opening) 1 38.0" (965 mm) 330-0582

Moderate Service 22.0" (560 mm) 7G-6448

Moderate Service (Trapezoidal Opening) 22.0" (560 mm) 329-9271

Moderate Service 24.0" (610 mm) 9P-2661






Moderate Service (Trapezoidal Opening) (Clipped) 1 32.0" (810 mm) 330-0583

Moderate Service (Clipped) 1 32.0" (810 mm) 191-9917

Moderate Service 1 38.0" (965 mm) 1Q-4621

Moderate Service (Trapezoidal Opening) 1 38.0" (965 mm) 330-0580

Chopper (Trapezoidal Opening) 24.0" (610 mm) 8E-9799

1 For use with wide gauge arrangement only.

148


D8T, D8R, D8N SystemOne TRACK SHOES8.58" (218.0 mm) PITCH -- 7/8 BOLTS

TYPE WIDTH

REGULARSHOE PART

NUMBER

MASTERSHOE PART

NUMBER

Super Extreme Service 22.0" (560 mm) 317-1018 317-1019




Super Extreme Service (Center Hole) 24.0" (610 mm) 276-0545 296-1372

Super Extreme Service (Center Hole) 26.0" (660 mm) 276-0533 240-6673




Extreme Service 1 38.0" (965 mm) 267-7504 257-6926



Extreme Service (Center Hole) 1 38.0" (965 mm) 300-9112 300-8743




1 For use with wide gauge arrangement only.

583T, 583R, 578 TRACK SHOES8.50" (215.9 mm) PITCH -- 7/8" BOLT

TYPE WIDTHPART

NUMBER

Moderate Service (Clipped Grouser) 1 28.0" (710 mm) 8E-9396

Moderate Service (Clipped Grouser) 1 30.0" (760 mm) 8E-9399

1 Clipped grouser edges; reduces snag loading.

587T, 587R TRACK SHOES8.50" (215.9 mm) PITCH - 7/8" BOLT

TYPE WIDTHPART

NUMBER

Super Extreme Service (Clipped Grouser) 34.0" (865 mm) 317-1033

149


D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578 SPROCKETS8.50" (215.9 mm) PITCH


NUMBER


Bolt 35 5P-7665

Nut 35 7H-3608

Washer 35 6V-5841

D8T, D8R, D8N, SystemOne SPROCKETS8.58" (218.0 mm) PITCH


NUMBER


Bolt 35 5P-7665

Nut 35 7H-3608

Washer 35 6V-5841

150


D8T, D8R, D8N IDLERS7XM3582-UP, 6YZ0001-UP


FORMERPART

NUMBERPART

NUMBER

Group -- Front (Large Diameter) 2 -- 111-1730

Group -- Rear (Small Diameter) 1 2 -- 111-1729

Components of Group

Idler Assembly (Front) 1 6Y-0556 6Y-0556

Idler Assembly (Rear) 1 6Y-0553 6Y-0553

Bearing 2 2 154-3298 154-3298

Shaft 1 138-9712 154-3307

Collar 2 -- 107-3947

Retainer 2 9P-0201 107-3946


Bolt 24 5P-2546 5P-2546

Washer 24 3K-6113 3K-6113




O-Ring 2 1 6V-2700 --


Toric Ring 2 2 -- 162-2167

Seal -- Retainer 2 8F-9516 8F-9516

Seal -- Collar 2 -- 107-4057

Stopper 1 9G-4872 9G-4872

Plug 1 6Y-0473 6Y-0473

Mounting Hardware 3


Bolt 4 9W-4480 9W-4480

Washer 4 3S-1349 3S-1349

Insert 2 9W-4481 9W-4481

Special Application Arctic Idler Groups

Idler Group -- Front (Large Diameter) (Arctic) 2 -- 244-0879

Idler Group -- Rear (Small Diameter) (Arctic) 2 -- 244-0878


Toric Ring 2 1 7T-1093 --

O-Ring 2 1 6V-2700 --


Toric Ring 2 2 -- 162-2167

1 D8R/N Non-Suspended (Hardbottom) Undercarriage machines use all small diameter idlers2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 These components are not included in the idler group; quantities shown are required to mount each idler.

151


D8T, D8R, D8N SystemOne IDLERSCENTER TREAD IDLER (CTI)


NUMBER

Group -- Front (Large Diameter) (786 mm Dia.) 2 329-5409

Group -- Rear (Small Diameter) (720 mm Dia.) 2 329-5412

Components of Group

Idler Assembly (Front) 1 329-5408

Idler Assembly (Rear) 1 329-5411

Bearing 1 2 154-3298

Shaft 1 154-3307

Collar 2 107-3947

Retainer 2 107-3946


Bolt 24 5P-2546

Washer 24 3K-6113


Toric Ring 1 2 162-2167


Seal -- Collar 2 107-4057

Stopper 1 9G-4872

Plug 1 6Y-0473

Mounting Hardware 2


Bolt 4 9W-4480

Washer 4 3S-1349

Insert 2 9W-4481


152


D8T, D8R, D8N LANDFILL/SPECIAL APPLICATION IDLERS


NUMBER

Group -- Front (Large Diameter) 2 244-1323

Group -- Rear (Small Diameter) 2 244-1324

Components of Group

Idler Assembly (Front) 1 6Y-0556

Idler Assembly (Rear) 1 6Y-0553

Bearing 1 2 154-3298

Shaft 1 154-3307

Collar 2 261-9673

Retainer 2 261-9672


Bolt 24 8C-6877

Washer 24 8T-5360

Plate 2 166-3324


Toric Ring 1 2 162-2167



Stopper 1 9G-4872

Plug 1 6Y-0473

Mounting Hardware 2


Bolt 4 9W-4480

Washer 4 3S-1349

Insert 2 9W-4481


Seal -- Duo-Cone Group (Symmetric) 2 9W-8878

Toric Ring 1 2 107-4888


153


D8T, D8R, D8N SystemOne LANDFILL/SPECIAL APPLICATION IDLERSCENTERED TREAD IDLER (CTI)


NUMBER

Group -- Front (Large Diameter) (786 mm Dia.) 2 314-5466

Group -- Rear (Small Diameter) (720 mm Dia.) 2 314-5467

Components of Group

Idler Assembly (Front) 1 329-5408

Idler Assembly (Rear) 1 329-5411

Bearing 1 2 154-3298

Shaft 1 154-3307

Collar 2 261-9673

Retainer 2 261-9672


Bolt 24 8C-6877

Washer 24 8T-5360

Plate 2 166-3324


Toric Ring 1 2 162-2167



Stopper 1 9G-4872

Plug 1 6Y-0473

Mounting Hardware 2


Bolt 4 9W-4480

Washer 4 3S-1349

Insert 2 9W-4481


D8T, D8R, D8N SystemOne IDLER GUARD CONVERSION KITGUARDING FOR CENTER TREAD IDLER (CTI)


NUMBER

Idler Guard Kit (Suspended) 1 1 316-8674

1 Refer to REHS3373 for piece-part and assembly information.

D8T, D8R, D8N SystemOne IDLER HARDWARE CONVERSION KITHARDWARE AND SHIMS FOR CENTER TREAD IDLER (CTI)


NUMBER

Idler Hardware Kit (Suspended) 1 307-0761

154


587T, 587R, 583T, 583R IDLERS


NUMBER

Group 4 111-1729

Components of Group

Idler Assembly 1 6Y-0553

Bearing 1 2 154-3298

Shaft 1 154-3307

Collar 2 107-3947

Retainer 2 107-3946


Bolt 24 5P-2546

Washer 24 3K-6113


Toric Ring 1 2 162-2167



Stopper 1 9G-4872

Plug 1 6Y-0473

Front Mounting Hardware 2


Block (Use with 306-9437 end cap) 1 9W-7882


Block (Use with 306-9439 end cap) 1 9W-7884

Bolt 4 8T-4934

Washer 4 3S-1349

Rear Mounting Hardware 2


Block (Use with 306-9437 End Cap) 1 357-6310


Block (Use with 306-9439 End Cap) 1 357-6311

Bolt 4 127-4835

Washer 4 7X-0531


155


578 IDLERS


FORMERPART

NUMBERPART

NUMBER

Group -- Front (Large Diameter) 4 -- 111-1730

Components of Group

Idler Assembly (Front) 1 6Y-0556 6Y-0556

Bearing 1 2 154-3298 154-3298

Shaft 1 138-9712 154-3307

Collar 2 -- 107-3947

Retainer 2 9P-0201 107-3946


Bolt 24 5P-2546 5P-2546

Washer 24 3K-6113 3K-6113




O-Ring 1 1 6V-2700 --


Toric Ring 1 2 -- 162-2167


Seal -- Collar 2 -- 107-4057

Stopper 1 9G-4872 9G-4872

Plug 1 6Y-0473 6Y-0473

Mounting Hardware 2


Bolt 4 9W-4480 9W-4480

Washer 4 3S-1349 3S-1349

Insert 2 9W-4481 9W-4481


Idler Group -- Front (Large Diameter) (Arctic) 2 -- 244-0879



O-Ring 1 1 6V-2700 --


Toric Ring 1 2 -- 162-2167


156


D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578 CARRIER ROLLERS


NUMBER


Mounting Hardware 2


Bolt 4 6T-1140

Washer 4 5P-8249

1 Refer to track roller section for component breakdown.2 These components are not included in the roller group; quantities shown are required to mount each roller.

D8R, D8N CARRIER ROLLERSFORMER


NUMBER

Group 2 8E-0400

Components of Group

Roller Shell 1 8E-0399

Shaft 1 8E-0398

Cup 2 7K-5448

Cone 2 7K-5449

Retaining Ring 1 8F-0737

Cover 1 5M-2043

Support 1 7H-2623

Plug 1 2P-0347

Bolt 3 0S-1594






Plate 1 3T-6269

Bolt 2 6F-7030

Lock 1 0T-0329




1 Component of preceding group; quantity shown is per group.

157


D8T, D8R, D8N, 578 TRACK ROLLERS


NUMBER


Single Flange (SF) 8 3 246-0775 2

Components of Group



Bearing 4 2 9W-9844

Shaft 1 107-8084

Collar 2 107-3945

Retainer 2 107-8085


Bolt 12 241-1855

Washer 12 5P-8245


Toric Ring 4 2 162-2166



Stopper 1 9G-5664

Plug 1 6Y-0473

Mounting Hardware 6

End Cap 7 2 131-1651

Bolt 4 6T-1140

Washer 4 5P-8249


Double Flange (DF) (Arctic) 8 278-9540


Seal -- Duo-Cone Group (Symmetric) (Arctic) 2 162-7862

Toric Ring (Arctic) 4 2 162-2166

Double Flange (DF) (High Heat) 8 278-9541


Seal -- Duo-Cone Group (Symmetric) (High Heat) 2 107-4889

Toric Ring (High Heat) 4 1 9M-9730

Seal -- Retainer (High Heat) 2 4S-5898

1 D8R/N Non-suspended (Hardbottom) undercarriage use all double flange rollers groups.2 Roller groups with longer retainer bolts (Ref IRM UC 01-09), effective serial numbers 6YZ00367 & UP, 7XM05116 & UP, 9EM01216 & UP.

3 Machines equipped with SystemOne undercarriage, use 16 single flange roller groups.4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.5 Use (1) 8P5217 Thrust Washer and (4) 8H4952 Dowels to repair former 9G8048 Retainer Assembly. DO NOT DRILL AND DOWEL NEW8E7510 Thrust Washer. See Special Instruction SEHS8515.6 These components are not included in the roller group; quantities shown are required to mount each roller.7 Abutment Style Design (Effective Serial Number 7XM3135-UP).

158


D8T, D8R, D8N, 578 TRACK ROLLERS EARLYINVERTED DUO-CONE SEAL GROUPS


NUMBER

Double Flange (DF) 8 --

Single Flange (SF) 8 1 --

Components of Group



Bearing 4 2 9W-9844

Shaft 1 6T-7500

Retainer 2 9W-8047


Bolt 12 0S-1595

Washer 12 5P-8245




O-Ring 4 1 6V-2701


Stopper 1 9G-5664

Plug 1 6Y-0473

Mounting Hardware 6


Bolt 4 6T-1140

Washer 4 5P-8249

Special Application Seal Group



O-Ring 4 1 6V-2701

1 10 Required for 578 Pipelayer.2 Roller Shell canceled and replaced by: (1) 246-0780 Roller Shell and (12) 241-1855 bolts.3 Roller Shell canceled and replaced by: (1) 284-5456 Roller Shell and (12) 241-1855 bolts.4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.5 Use (1) 8P5217 Thrust Washer and (4) 8H4952 Dowels to repair former 9G8048 Retainer Assembly. DO NOT DRILL AND DOWEL NEW8E7510 Thrust Washer. See Special Instruction SEHS8515.6 These components are not included in the roller group; quantities shown are required to mount each roller.

159


587T, 587R, 583T, 583R TRACK ROLLERS


FORMERPART

NUMBERPART

NUMBER

Double Flange (DF) 18 -- 198-6703 1

Components of Group

Roller Shell (DF) 1 153-3901 2 198-6704

Bearing 3 2 154-3298 154-3298

Shaft 1 138-9712 138-9712

Retainer 2 6Y-2946 6Y-2946


Bolt 12 0S-1585 241-1855

Washer 12 5P-8245 5P-8245


Seal -- Duo-Cone Group (Inverted) 2 7T-0159 7T-0159

Toric Ring 3 1 8P-0021 8P-0021

O-Ring 3 1 6V-2700 6V-2700


Stopper 1 9G-4872 9G-4872

Plug 1 6Y-0473 6Y-0473

Mounting Hardware 5


Bolt 4 9X-8898 9X-8898

Washer 4 3K-5234 3K-5234


Double Flange (DF) (Arctic) 18 -- 198-6859

Seal -- Duo-Cone Group (Arctic) 2 7T-5125 7T-5125

Toric Ring 3 1 7T-1093 7T-1093

O-Ring 3 1 6V-2700 6V-2700

1 Roller group with longer retainer bolts.2 Roller shell canceled and replaced by: (1) Roller Shell 198-6704, (12) Bolts 241-1855.3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.4 Use (1) 8P5217 Thrust Washer and (4) 8H4952 Dowels to repair former 9G8048 Retainer Assembly. DO NOT DRILL AND DOWEL NEW8E7510 Thrust Washer. See Special Instruction SEHS8515.5 These components are not included in the roller group; quantities shown are required to mount each roller.

D8T FLEXIBLE IDLER WEAR GUARDS


NUMBER

Guard As. Front & Rear (Rubber) 4 163-2415

Plate 4 155-2754

Bolt (5/8 inch) 12 8T-6871

Washer 12 8T-4122

160


D8R FLEXIBLE IDLER WEAR GUARDS7XM5094 & UP, 6YZ0325 TO 329, 6YZ0331 & UP, AKA0324 & UP, 9EM1213 & UP


NUMBER

Guard As. Front & Rear (Rubber) 4 163-2415

Plate 4 155-2754

Bolt (5/8 inch) 12 8T-6871

Washer 12 8T-4122

Guard As. Rear Sides 4 155-2742

Bolt (5/8 inch) 12 7X-0345

Washer 12 8T-4122

D8N TRACK ROLLER GUARDSNON-SUSPENDED UNDERCARRIAGE

1XJ


NUMBER


Spacer 16 3P-8283

Bolt 16 7X-0383

Washer 32 8T-4223

Bolt 32 8C-4436

587T, 587R, 583T, 583R TRACK ROLLER GUARDS


NUMBER




Bolt 24 7X-0383

Spacer 24 3P-8283

Washer 24 5P-1076

Bolt 24 8C-4436

D8T, D8R, D8N, 578 TRACK GUIDESBOGIE SUSPENSION

7XM, 9TC, 5TJ, 8HB, 9EM, KPZ, J8B


NUMBER

Guide 16 248-2987

Bolt 32 8T-8924

Washer 32 8T-4994

161


D8T, D8R, D8N TRACK GUIDESNON-SUSPENDED UNDERCARRIAGE


NUMBER

Guide 28 248-2987

Bolt 56 8T-8924

Washer 56 8T-4994

D8T, D8R, D8N BOGIE PADS7XM, 9TC, 5TJ, 9EM, KPZ, J8B


NUMBER

Bogie Pad Assembly 16 7T-4700

Bolt 64 7X-0307

Washer 64 8T-5360

578 BOGIE PADS8HB


NUMBER


Bolt 64 5P-2228

Washer 64 5P-1076

D8T, D8R, D8N, 578 CARTRIDGE PINSBOGIE SUSPENSION

5TJ, 7XM, 8HB, 9EM, 9TC, KPZ, J8B


NUMBER

Pin Assembly 32 7T-9307

Pin Assembly (Arctic Applications) 32 266-3152

Pin Assembly (Steel Mill Applications) 32 1Z-9353

162

Elevated Sprocket TractorsD8L

D8L TRACK53Y, 7JC, 7YB

8.50" (215.9 mm) PITCH -- 7/8" BOLT

QUANTITYPART

NUMBER

Link Assembly -- 45 Section 2 6I-8665 1

Track Links







Other Components

Pin 44 199-2794


Bushing 45 6Y-3914

Retaining Ring 2 3T-9118



Stopper 45 7G-4332

Plug 45 6Y-0473

Track Hardware 2

Bolt 176 6V-1723

Nut 176 7G-6442



Special Set/Group


1 Current D8L link assemblies consist of D8N components; refer to IRM UC93-6. When installing this link assembly for the first time, alsorefer to Special Instruction SEHS9720 modification requirements.2 Not part of link assembly; required to assemble track group.

D8L MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITYPART

NUMBER



163


D8L SPECIAL APPLICATION TRACK 1

4FB8.50" (215.9 mm) PITCH -- 7/8" BOLT

QUANTITY

FORMERPART

NUMBERPART

NUMBER

Link Assembly -- 45 Section 2 -- -- 2

Track Links

RH Pin End Master 1 223-1617 8E-4059

LH Pin End Master 1 223-1618 8E-4060

RH Bushing End Master 1 8E-4457 8E-4457

LH Bushing End Master 1 8E-4458 8E-4458

RH Regular 44 8E-4505 8E-4505

LH Regular 44 8E-4506 8E-4506

Other Components

Pin 44 6Y-2150 6Y-2150

Master Pin 1 6Y-2149 6Y-2149

Bushing 45 6I-8691 6I-8691

Retaining Ring 2 3T-9118 3T-9118

Seal Assembly 90 239-7943 239-7943

Thrust Ring 90 152-8073 152-8073

Stopper 45 7G-4332 7G-4332

Plug 45 6Y-0473 6Y-0473

Track Hardware 3

Bolt 176 6V-1723 6V-1723

Nut 176 7G-6442 7G-6442

Master Bolt (Long) 2 6V-1725 6V-1725

Master Bolt (Short) 2 6V-1724 6V-1724

Special Set/Group

Seal Set (90 Seal Assemblies) 1 272-6013 272-6013

1 Special track which includes polished pins and bushings and special high temperature oil for high speed/high drawbar agriculturalapplications.2 Current D8L link assemblies consist of D8N components; refer to IRM UC93-6. When installing this link assembly for the first time, alsorefer to Special Instruction SEHS9720 modification requirements.3 Not part of link assembly; required to assemble track group.

164


D8L TRACK SHOES8.50" (215.9 mm) PITCH -- 7/8" BOLT

TYPE WIDTHPART

NUMBER

Super Extreme Service 1 24.0" (610 mm) 317-1030














Moderate Service 36.0" (915 mm) 7T-2310

Chopper (Trapezoidal Opening) 24.0" (610 mm) 8E-9799

1 Modified D9L ES Track Shoe Section.

D8L SPROCKETS


NUMBER



Nut Strip 6 115-1147

Nut 1 3 7H-3608

Bolt 27 5P-4130

Washer 27 034-0707

1 To be used with 163-6406 Sprocket Segment. Refer to IRM UC99-8 for addition information.

165


D8L IDLERS


FORMERPART

NUMBERPART

NUMBER

Group 4 -- 111-1730

Components of Group

Idler Assembly 1 6Y-0556 6Y-0556

Bearing 1 2 154-3298 154-3298

Shaft 1 138-9712 154-3307

Collar 2 -- 107-3947

Retainer 2 9P-0201 107-3946


Bolt 24 5P-2546 5P-2546

Washer 24 3K-6113 3K-6113




O-Ring 1 1 6V-2700 --


Toric Ring 1 2 -- 162-2167


Seal - Collar 2 -- 107-4057

Stopper 1 9G-4872 9G-4872

Plug 1 6Y-0473 6Y-0473

Mounting Hardware 2

End Cap 3 2 306-9441 306-9441

End Cap 4 2 131-1650 131-1650

Bolt 5 4 6T-1139 6T-1139

Bolt 6 4 1D-4642 1D-4642

Bolt 7 4 6V-1726 6V-1726

Bolt 8 4 9W-4480 9W-4480

Washer 4 3S-1349 3S-1349

Insert 2 9W-4481 9W-4481


Idler Group (Arctic) 4 -- 244-0879



O-Ring 1 1 6V-2700 --


Toric Ring 1 2 -- 162-2167

1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 These components are not included in the idler group; quantities shown are required to mount each idler.3 Used with 1-1/8" Bolt. (Abutment Style Design)4 Used with 1" Bolt. (Abutment Style Design)5 1" - 8 x 3.82" Bolt.6 1" - 8 x 5.0" Bolt.7 1" - 14 x 3.82" Bolt.8 1-1/8" - 7 x 5.5" Bolt.

166


D8L TRACK ROLLERS


NUMBER

Double Flange (DF) 8 246-0779 1


Components of Group



Bearing 2 2 9W-9844

Shaft 1 107-8084

Collar 2 107-3945

Retainer 2 107-8085


Bolt 12 241-1855

Washer 12 5P-8245

Stabilizer Ring 2 --

Seal -- Duo-Cone Group (Inverted) 2 --

Toric Ring 2 1 --

O-Ring 2 1 --


Toric Ring 2 2 162-2166



Stopper 1 9G-5664

Plug 1 6Y-0473

Mounting Hardware 4


Bolt 4 6T-1140

Washer 4 5P-8249


Double Flange (DF) (Artic) 8 278-9540

Single Flange (SF) (Artic) 8 278-9539

Seal - Duo-Cone Group (Symmetric) (Arctic) 2 162-7862

Toric Ring (Arctic) 2 2 162-2166





Seal - Retainer (High Heat) 2 4S-5898

Seal -- Duo-Cone Group (Inverted) 2 --

Toric Ring 2 1 --

O-Ring 2 1 --

1 Roller groups with longer retainer bolts.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 Use (1) 8P5217 Thrust Washer and (4) 8H4952 Dowels to repair former 9W8048 Retainer Assembly. DO NOT DRILL AND DOWEL NEW8E7510 Thrust Washer. See Special Instruction SEHS8515.4 These components are not included in the roller group; quantities shown are required to mount each roller.

167


D8L TRACK GUIDES


NUMBER

Guide 16 248-2987

Bolt 32 8T-8924

Washer 32 8T-4994

D8L BOGIE PADS


NUMBER


Bolt 64 0S-1621

Washer 64 5P-1076

D8L CARTRIDGE PINS8.50" (215.9 mm) PITCH -- 7/8" BOLT


NUMBER




168

Elevated Sprocket TractorsD9T, D9R, D9N


1JD, 6XJ, 7TL, 8BL, ACL, ABK, RJS9.45" (240.0 mm) PITCH -- 1" BOLT

QUANTITYPART

NUMBER


Track Links

RH Pin End Master 1 250-4245

LH Pin End Master 1 250-4246

RH Bushing End Master 1 250-4247

LH Bushing End Master 1 250-4248



Other Components

Pin 43 186-0780

Bushing 43 186-0781


Thrust Ring 86 9W-2755 1

Retaining Ring (PPR) 86 6Y-0470

Stopper 43 7G-4332

Plug 43 6Y-0473

Track Hardware 2

Bolt 168 6T-2638

Nut 168 7G-0343


Master Bolt (Short) 2 7T-2283

Special Sets/Groups


Retaining Ring Group (106 Retaining Rings) 1 9W-4265

Thrust Ring Facing Group 3 1 9W-9674

1 9W-9619 ring assembly contains two facing rings already applied to the 9W-2755 thrust ring.2 Not part of link assembly; required to assemble track group.3 Contains 430 facing rings to service 2 link assemblies.

169



PPR TRACK

QUANTITYPART

NUMBER





Super Extreme Service Shoe -- 24" (610 mm) 2 203-2199



1JD, 6XJ, 7TL, 8BL, ACL, ABK, RJS9.45" (240.0 mm) PITCH -- 1" BOLT

QUANTITYPART

NUMBER


Track Links





RH Regular 42 9W-2743

LH Regular 42 9W-2744

Other Components

Pin 42 199-5522

Master Pin 1 199-5523

Bushing 43 186-0781


Thrust Ring 86 9W-2755

Retaining Ring 2 6K-3631

Stopper 43 7G-4332

Plug 43 6Y-0473

Track Hardware 1

Bolt 168 6T-2638

Nut 168 7G-0343



Special Sets/Groups



170



Non-PPR TRACK

QUANTITYPART

NUMBER



D9T, D9R, D9N TRACK SHOES9.45" (240.0 mm) PITCH -- 1" BOLT

TYPE WIDTHPART

NUMBER

Super Extreme Service 24.0" (610mm) 139-0617

Super Extreme Service 27.0" (685 mm) 1Q-4755

Super Extreme Service (ARM) 24.0" (610mm) 243-4365



Extreme Service 27.0" (685 mm) 9W-2738

Extreme Service (ARM) 24.0" (610 mm) 243-4368

Extreme Service (ARM) 27.0" (685 mm) 232-3326



Extreme Service (Clipped Grouser) 27.0" (685mm) 1Q-4649

Extreme Service (Trapezoidal Opening) (Clipped Grouser) 30.0" (760 mm) 234-5973



Chopper (Trapezoidal Opening) 26.0" (660 mm) 9U-9577

D9T, D9R, D9N SPROCKETS


NUMBER

Sprocket Segment (Tough Steel) ( 5 Tooth) 5 278-2376

Bolt 30 7T-1248

Nut 30 7H-3609

Washer 30 5P-8249

171


D9T, D9R, D9N IDLERS7TL1057-UP, 8BL1352-UP


FORMERPART

NUMBERPART

NUMBER

Group 4 -- 125-4655

Components of Group

Idler Assembly 1 7T-2770 7T-2770

Bearing 1 2 9W-9499 9W-9499

Shaft 1 138-9378 154-3309

Collar 2 -- 107-3947

Retainer 2 9P-0201 107-3946


Bolt 24 5P-2546 5P-2546

Washer 24 3K-6113 3K-6113


Seal -- Duo-Cone Group (Inverted Design) 2 7T-0159 --


O-Ring 1 1 6V-2700 --

Seal -- Duo-Cone Group (Symmetric Design) 2 -- 162-7863

Toric Ring 1 2 -- 162-2167


Seal -- Collar 2 -- 107-4057

Stopper 1 9G-4872 9G-4872

Plug 1 6Y-0473 6Y-0473

Mounting Hardware 2

End Cap (Two Bolt Design, Abutment Style) 2 306-9441 306-9441

Bolt 4 9W-4480 9W-4480

Washer 4 3S-1349 3S-1349

End Cap (Three Bolt Design, Abutment Style) 3 1 306-9443 306-9443


Bolt 6 9W-4480 9W-4480

Washer 6 3S-1349 3S-1349

Wedge (Use with former cap design) 2 107-8040 --

Insert 2 9W-4481 9W-4481



Seal -- Duo-Cone Group (Inverted Design) 2 7T-5125 --


O-Ring 1 1 6V-2700 --

Seal -- Duo-Cone Group (Symmetric Design) 2 -- 162-7863

Toric Ring 1 2 -- 162-2167

1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 These components are not included in the idler group; quantities shown are required to mount each idler.3 Effective serial numbers: 7TL703-UP and 8BL934-UP.

172




NUMBER

Group 4 167-1947

Components of Group

Idler Assembly 1 7T-2770

Bearing 1 2 9W-9499

Shaft 1 154-3309

Collar 2 261-9673

Retainer 2 261-9672


Bolt 24 8C-6877

Washer 24 8T-5360

Plate 4 166-3324

Seal -- Duo-Cone Group (Symmetric Design) 2 162-7863

Toric Ring 1 2 162-2167



Stopper 1 9G-4872

Plug 1 6Y-0473

Mounting Hardware 2

End Cap (Two Bolt Design, Abutment Style) 2 306-9441

Bolt 4 9W-4480

Washer 4 3S-1349

End Cap (Three Bolt Design, Abutment Style) 3 1 306-9443


Bolt 6 9W-4480

Washer 6 3S-1349

Insert 2 9W-4481




1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 These components are not included in the idler group; quantities shown are required to mount each idler.3 Effective serial numbers: 7TL703-UP and 8BL934-UP.

D9T, D9R, D9N CARRIER ROLLERS


NUMBER

Group - Single Flange (SF) 2 196-9955 1

Mounting Hardware 2

End Cap 4 6T-4504

Bolt 4 7X-0393

Washer 4 8C-6913

1 Refer to Track Roller Section for component breakdown.2 These components are not included in the roller group. Quantities shown are required to mount each roller.

173


D9T, D9R, D9N TRACK ROLLERS


EARLYPART

NUMBER

FORMERPART

NUMBERPART

NUMBER

Double Flange (DF) 8 -- -- 196-9954 1

Single Flange (SF) 8 -- -- 196-9955 1

Components of Group

Roller Shell (DF) 1 104-8577 2 104-8577 2 196-9956

Roller Shell (SF) 1 104-8576 3 104-8576 3 196-9957

Bearing 4 2 9W-9844 9W-9844 9W-9844

Shaft 1 8E-6643 104-3494 104-3494

Retainer 2 6I-9719 107-3944 107-3944

Collar 2 -- 107-3945 107-3945

Thrust Washer 2 8E-7510 8E-7510 8E-7510

Bolt 12 0S-1595 0S-1595 241-1855

Washer 12 5P-8245 5P-8245 5P-8245

Stabilizer Ring 2 6T-4871 -- --

Seal -- Duo-Cone Group (Inverted) 2 7T-0158 -- --

Toric Ring 4 1 6P-8912 -- --

O-Ring 4 1 6V-2701 -- --

Seal -- Duo-Cone Group (Symmetric) 2 -- 162-7862 162-7862

Toric Ring 4 2 -- 162-2166 162-2166

Seal -- Retainer 2 5F-3106 5F-3106 5F-3106

Seal -- Collar 2 -- 7J-2036 7J-2036

Stopper 1 9G-4872 9G-4872 9G-4872

Plug 1 6Y-0473 6Y-0473 6Y-0473

Mounting Hardware 5

End Cap 6 2 131-1651 131-1651 131-1651

Bolt 4 6T-1140 6T-1140 6T-1140

Washer 4 5P-8249 5P-8249 5P-8249


Double Flange (DF) (Arctic) 8 -- -- 245-9944

Single Flange (SF) (Arctic) 8 -- -- 245-9943


Toric Ring 4 2 -- 162-2166 162-2166

Double Flange (DF) (Steel Mill) 8 -- 245-9946

Single Flange (SF) (Steel Mill) 8 -- 245-9945


Toric Ring 4 2 -- 9M-9730 9M-9730

Seal -- Retainer 2 -- 4S-5898 4S-5898


Toric Ring 4 1 7T-1094 -- --

O-Ring 4 1 6V-2701 -- --

1 Roller Groups with longer retainer bolt (ref IRM UC01-09), effective serial numbers ABK00471 & UP, ACL00678 & UP.2 Roller Shell canceled and replaced by (1) 196-9956 roller shell and (12) 241-1855 bolts.3 Roller Shell canceled and replaced by (1) 196-9957 roller shell and (12) 241-1855 bolts.4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.5 These components are not included in the roller group; quantities shown are required to mount each roller.6 Abutment Style Design (Effective Serial Numbers 8BL1281-UP, 7TL1017-UP)

174


D9T, D9R FLEXIBLE IDLER WEAR GUARDSABK0438-UP, ACL0656-UP


NUMBER

Guard As. Front & Rear 4 165-7855

Plate 4 165-7860

Bolt (5/8 inch) 12 8T-6871

Washer 12 8T-4122

Guard As. Rear Sides (RH) 2 165-7861

Guard As. Rear Sides (LH) 2 165-7862

Bolt (5/8 inch) 12 7X-0345

Washer 12 8T-4122

D9T, D9R, D9N TRACK GUIDES


NUMBER

Guide 16 184-4395

Bolt 32 8C-6857

Washer 32 8T-4994

D9T, D9R, D9N BOGIE PADS


NUMBER


Bolt 64 5P-2228

Washer 64 5P-1076

D9T, D9R, D9N CARTRIDGE PINS


NUMBER




175

Elevated Sprocket TractorsD9L, 589

D9L TRACKNON-POSITIVE PIN RETENTION (NON-PPR) TRACK

14Y9.00" (228.6 mm) PITCH -- 1" BOLT

QUANTITYPART

NUMBER

Link Assembly -- 47 Section 2 6Y-2887

Track Links







Other Components

Pin 46 6Y-2146

Master Pin 1 6Y-2147

Bushing 47 6Y-2141

Seal Assembly (Rigid Seal) 94 207-0545

Thrust Ring 94 9W-2755

Retaining Ring 2 7G-7198

Stopper 47 7G-4332

Plug 47 6Y-0473

Track Hardware 1

Bolt 184 6V-1726

Nut 184 7G-0343



Special Sets/Groups



176


D9L, 589 TRACKPOSITIVE PIN RETENTION (PPR) TRACK

D9L: 14Y, 589: 31Z9.00" (228.6 mm) PITCH -- 1" BOLT

PARTNUMBER

D9L47 Section

58953 Section


Track Links





RH Regular 7T-4137 46 52

LH Regular 7T-4138 46 52

Other Components

Pin 186-0780 47 53

Bushing 6Y-2141 47 53

Seal Assembly (Rigid Seal) 207-0545 94 106

Thrust Ring 9W-2755 1 94 106

Retaining Ring (PPR) 6Y-0470 94 106

Stopper 7G-4332 47 53

Plug 6Y-0473 47 53

Track Hardware 2

Bolt 6V-1726 184 208

Nut 7G-0343 184 208

Master Bolt (Long) 6V-1728 2 2

Master Bolt (Short) 7T-2283 2 2

Special Sets/Groups


Retaining Ring Group (106 Retaining Rings) 9W-4265 1 1

Thrust Ring Facing Group 3 9W-9674 1 1

1 9W-9619 ring assembly contains two facing rings already applied to the 9W-2755 thrust ring.2 Not part of link assembly; required to assemble track group.3 Contains 430 facing rings to service 2 link assemblies.

D9L MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIES

PPR TRACK

QUANTITYPART

NUMBER




177


D9L TRACK SHOES9.00" (228.6 mm) PITCH -- 1" BOLT

TYPE WIDTH

REGULARSHOE PART

NUMBER

MASTERSHOE PART

NUMBER

Extreme Service 24.0" (610 mm) 3T-8493 9W-1851



Moderate Service 24.0" (610 mm) 3T-2758 9W-1853

Moderate Service 27.0" (685 mm) 7G-3766 9W-1850

Moderate Service (Trapezoidal Opening) 27.0" (685 mm) 1Z-9479 1Z-9478

Moderate Service 30.0" (760 mm) 7G-7150 9W-1854

589 TRACK SHOES9.00" (228.6 mm) PITCH -- 1" BOLT

TYPE WIDTH

REGULARSHOE PART

NUMBER

MASTERSHOE PART

NUMBER

Extreme Service (Clipped Grouser) 1 36.0" (915 mm) 3T-8502 3T-8501

1 Clipped grouser, reduces snag loading.

D9L, 589 SPROCKETS


NUMBER



Bolt 27 9W-8328

Nut 1 3 7H-3609


Washer 27 5P-6604

1 To be used with 157-4292 Sprocket Segment. Refer to IRM UC99-8 for additional information.

D9L SPROCKETConverted to D10R/N Undecarriage


NUMBER

Sprocket Gp (Contains 3 segments) 1 234-7703 1

Bolt 27 9W-8328

Nut 27 7H-3609

Washer 27 5P-6604

1 Refer to IRM UC04-15 for further information. This segment group includes all three segments, former design required ordering theindividual "9W" segments.

178


D9L, 589 IDLERS


NUMBER

Group 4 9W-6039

Components of Group

Idler Assembly 1 9W-6037

Bearing 1 2 9W-4194

Shaft 1 140-0291

Retainer Assembly 2 142-2803

Bolt 24 4K-5175

Washer 24 3H-7654




O-Ring 1 1 6V-2698


Stopper 1 9G-4872

Plug 1 6Y-0473

Mounting Hardware 2




Bolt 3 4 8T-4934

Bolt 4 4 2D-3424

Bolt 5 4 9W-4488

Washer 3 4 3S-1349

Washer 4 4 3S-1349

Washer 5 4 4K-0684

Wedge (Use with former cap design) 2 109-8014

Insert 2 9W-4489

Special Application Arctic Idler Group

Idler Group 4 9W-6038

Seal -- Duo-Cone Group 2 6V-2614


O-Ring 1 1 6V-2698

1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 These components are not included in the idler group; quantities shown are required to mount each idler.3 Used with 1-1/8" -- 7 bolt.4 Used with 1-1/8" -- 12 bolt.5 Used with 1-1/4" -- 7 bolt.

179


589 CARRIER ROLLERS


NUMBER

Group (Single Flange (SF) 2 6Y-2950 1

Mounting Hardware 2

End Cap 4 6T-4964

Bolt 4 7X-0444

Washer 4 8T-5361

1 Refer to track roller section for component breakdown.2 These components are not included in the roller group; quantities shown are required to mount each roller.

D9L, 589 TRACK ROLLERS


NUMBER

Double Flange (DF) 8 1 6Y-2951

Single Flange (SF) 8 6Y-2950

Components of Group

Roller Shell (DF) 1 6Y-2953

Roller Shell (SF) 1 6Y-2952

Bearing 2 2 9W-9499

Shaft 1 8E-6661

Retainer 2 6Y-2946


Bolt 12 0S-1595




O-Ring 2 1 6V-2700


Stopper 1 9G-5664

Plug 1 6Y-0473

Mounting Hardware 3

End Cap 2 131-1650

Bolt 4 6T-1139

Washer 4 3K-5234


Double Flange (DF) (Arctic) 8 6Y-2949

Single Flange (SF) (Arctic) 8 6Y-2948



O-Ring 2 1 6V-2700

1 589 Pipelayer uses 12 Double Flange groups.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 These components are not included in the roller group; quantities shown are required to mount each roller.

180


D9L TRACK GUIDES


NUMBER

Guide 16 184-4396

Bolt 32 7X-0386

Washer 32 8C-6913

589 TRACK GUIDES


NUMBER

Guide 20 184-4396

Bolt 40 7X-0386

Washer 40 8C-6913

D9L BOGIE PADS


NUMBER


Bolt 64 5P-2228

Washer 64 5P-1076

589 BOGIE PADS


NUMBER


Bolt 80 5P-2228

Washer 80 5P-1076

D9L CARTRIDGE PINS


NUMBER



589 CARTRIDGE PINS


NUMBER



181



2YD, 3SK, 3KR, AKT, RJG10.25" (260.4 mm) PITCH -- 1-1/8" BOLT

QUANTITYPART

NUMBER


Track Links







Other Components

Pin 44 6Y-1579

Bushing 44 6Y-2057


Seal Assembly (Rigid) (Post Turn Seal) 1 88 252-6327

Thrust Ring 88 352-9703 2


Stopper 44 7G-4332

Plug 44 6Y-0473

Track Hardware 3

Bolt 172 7T-1000

Nut 172 5P-8221

Master Bolt (Long) 2 7T-0998


Special Sets/Groups


Seal Set (Post Turn Seal) (92 Seal Assemblies) 1 1 252-6329


Thrust Ring Facing Group 1 239-5509

1 To be used at service time (turn or reseal) if bushing end grooving doesn't exceed 50%.2 352-9704 ring assembly contains two facing rings already applied to the 352-9703 thrust ring.3 Not part of link assembly; required to assemble track group.

182



PPR TRACK

QUANTITYPART

NUMBER


Extreme Service Shoe -- 24" (610 mm) 2 7T-0723

Extreme Service Shoe -- 28" (710 mm) 2 7T-4608


Super Extreme Service Shoe -- 24" (610 mm) 2 1Q-4636



2YD, 3SK, 3KR, RJG10.25" (260.4 mm) PITCH -- 1-1/8" BOLT

QUANTITYPART

NUMBER


Track Links







Other Components

Pin 43 6Y-1578


Bushing 44 6Y-2057




Retaining Ring 2 9W-6854

Stopper 44 7G-4332

Plug 44 6Y-0473

Track Hardware 2

Bolt 172 7T-1000

Nut 172 5P-8221



Special Sets/Groups



1 To be used at service time (turn or reseal) if bushing end grooving doesn't exceed 50%.2 Not part of link assembly; required to assemble track group.

183



Non PPR TRACK

QUANTITYPART

NUMBER



D10T, D10R, D10N TRACK SHOES10.25" (260.4 mm) PITCH -- 1-1/8" BOLT

TYPE WIDTH

REGULARSHOE PART

NUMBER

MASTERSHOE PART

NUMBER



Super Extreme Service (ARM) 24.0" (610 mm) 228-7597 228-7598

Super Extreme Service (ARM) 28.0" (710 mm) 226-0268 226-0269



Extreme Service 30.0" (760 mm) 6Y-2534 6Y-2536

Extreme Service (Clipped Grouser) 30.0" (760 mm) 1Q-4651 6Y-2536


Extreme Service (ARM) 1 24.0" (610 mm) 239-2309 239-2310




Extreme Service (Trapezoidal Opening) 24.0" (610 mm) 234-6033 234-6029



1 MADE AS ORDERED. When the order is placed, allow 2 or 3 months for shoes to be delivered.



NUMBER


Bolt 30 5P-5422

Nut 30 2M-5656

Washer 30 5P-8250

184


D10T, D10R, D10N SPROCKETSSOUND REDUCED


NUMBER


Bolt 30 5P-5422

Nut 30 2M-5656

Washer 30 5P-8250

185


D10T, D10R, D10N IDLERS3KR1178-UP

INTRODUCTION OF SYMMETRIC SEAL DESIGN


FORMERPART

NUMBERPART

NUMBER

Group 4 -- 125-3537

Components of Group

Idler Assembly 1 7T-0961 7T-0961

Bearing 1 2 9W-4194 9W-4194

Shaft 1 128-9693 154-3308

Collar 2 -- 107-9620

Retainer Assembly 2 142-2803 142-2805

Bolt (1/2") 24 4K-5175 4K-5175

Washer 24 3H-7654 3H-7654



Toric Ring 1 1 8H-2262 --

O-Ring 1 1 6V-2698 --


Toric Ring 1 2 -- 162-2168


Seal -- Collar 2 -- 7R-8872

Stopper 1 9G-4872 9G-4872

Plug 1 6Y-0473 6Y-0473

Mounting Hardware 2

End Cap (Two Bolt Design, Abutment Style) 2 306-9431 306-9431

Bolt 4 9W-4488 9W-4488

Washer 4 4K-0684 4K-0684



Bolt 6 9W-4488 9W-4488

Washer 6 4K-0684 4K-0684

Wedge (Use with former cap design) 2 109-8014 --

Insert 2 9W-4489 9W-4489

Special Application Idlers


Seal -- Duo-Cone Group (Inverted) 2 6V-2614 --

Toric Ring 1 1 9M-9730 --

O-Ring 1 1 6V-2698 --


Toric Ring 1 2 -- 162-2168

1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 These components are not included in the idler group; quantities shown are required to mount each idler.3 Effective serial numbers: 3KR395-UP.

186




NUMBER

Group 4 167-1946

Components of Group


Bearing 1 2 9W-4194

Shaft 1 154-3308

Collar 2 261-9674


Bolt (1/2") 24 8T-4835

Washer 24 8T-4223

Plate 2 166-9445


Toric Ring 1 2 162-2168


Seal -- Collar 2 7R-8872

Stopper 1 9G-4872

Plug 1 6Y-0473

Mounting Hardware 2


Bolt 4 9W-4488

Washer 4 4K-0684



Bolt 6 9W-4488

Washer 6 4K-0684

Insert 2 9W-4489


187


D10T, D10R, D10N IDLERSSOUND REDUCED


NUMBER

Group 4 198-7309

Components of Group


Bearing 1 2 9W-4194

Segment Assembly 16 234-8877

Segment Assembly (Position over slot in idler assembly) 4 258-4806

Bar (Install in slots with segment assembly 258-4806) 2 257-9827

Guide 6 234-8881

Bolt (1 1/4") (Guide to Segment Assemblies) 24 136-4188

Washer 24 4K-0684

Shaft 1 154-3308

Collar 2 107-9620


Bolt (1/2") 24 6J-2515

Washer 24 3H-7654


Toric Ring 1 2 162-2168



Stopper 1 9G-4872

Plug 1 6Y-0473

Mounting Hardware 2


Bolt 4 9W-4488

Washer 4 4K-0684



Bolt 6 9W-4488

Washer 6 4K-0684

Insert 2 9W-4489


188




NUMBER


Mounting Hardware 2

End Cap 4 6T-4964

Bolt 4 7X-0444

Washer 4 8T-5361


189


D10T, D10R, D10N TRACK ROLLERSSYMMETRIC DESIGN


EARLYPART

NUMBER

FORMERPART

NUMBERPART

NUMBER

Double Flange (DF) 8 -- -- 309-7678 1

Single Flange (SF) 8 -- -- 309-7679 1

Components of Group

Roller Shell (DF) 1 6Y-0892 2 6Y-0892 2 309-7676

Roller Shell (SF) 1 6Y-0891 3 6Y-0891 3 309-7677

Bearing 4 2 9W-9499 9W-9499 9W-9499

Shaft 1 146-3584 154-3306 154-3306

Retainer 2 6Y-0893 309-7680 309-7680

Collar 2 -- 107-3947 107-3947

Thrust Washer 2 8E-6619 8E-6619 8E-6619

Bolt 12 0S-1595 0S-1595 241-1855

Washer 12 5P-8245 5P-8245 5P-8245


Seal -- Duo-Cone Group (Inverted Design) 2 7T-0159 -- --

Toric Ring 4 1 8P-0021 -- --

O-Ring 4 1 6V-2700 -- --

Seal -- Duo-Cone Group (Symmetric Design) 2 -- 162-7863 162-7863

Toric Ring 4 2 -- 162-2167 162-2167

Seal -- Retainer 2 8F-9516 8F-9516 8F-9516

Seal -- Collar 2 -- 107-4057 107-4057

Stopper 1 9G-4872 9G-4872 9G-4872

Plug 1 6Y-0473 6Y-0473 6Y-0473

Mounting Hardware 5

End Cap (Abutment Style) 6 2 -- 131-1650 131-1650

Bolt 4 6T-1139 6T-1139 6T-1139

Washer 4 3K-5234 3K-5234 3K-5234


Double Flange (DF) (Arctic) 8 -- -- 332-6424

Single Flange (SF) (Arctic) 8 -- -- 332-6423

Seal -- Duo-Cone Group (Symmetric Design) 2 -- 162-7863 162-7863

Toric Ring 4 2 -- 162-2167 162-2167

Seal -- Duo-Cone Group (Inverted Design) 2 7T-5125 -- --

Toric Ring 4 1 7T-1093 -- --

O-Ring 4 1 6V-2700 -- --

1 Roller Groups with longer retainer bolts (ref IRM UC01-09), effective serial numbers 3KR1610 & UP.2 Canceled & replaced by (1) 195-5854 roller shell & (12) 241-1855 bolts.3 Canceled & replaced by (1) 195-5853 roller shell & (12) 241-1855 bolts.4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.5 These components are not included in the roller group; quantities shown are required to mount each roller.6 Effective serial numbers: 3KR1111-UP.

190


D10T, D10R FLEXIBLE IDLER WEAR GUARDS3KR1600-UP, AKT0188-UP


NUMBER

Guard As. Rear (Rubber) 2 147-5331

Guard As. Front (Rubber) 2 147-5332

Plate 4 147-5333

Bolt (5/8 inch) 12 8T-6871

Washer 12 8T-4122

Guard As. Rear Sides 4 147-5330

Bolt (5/8 inch) 12 7X-0344

Washer 12 8T-4122



NUMBER

Guide 16 184-4396

Bolt 32 7X-0386

Washer 32 8C-6913



NUMBER


Bolt 64 5P-2228

Washer 64 5P-1076

D10T, D10R, D10N CARTRIDGE PINS10.25" (260.4 mm) PITCH -- 1-1/8" BOLT


NUMBER



D10T, D10R U/C TRACK ROLLER FRAMESCAMBER ONLY WITH ROLLERS AND IDLERS

QUANTITYPART

NUMBER

Right Hand U/C Track Roller Frame 1 1 355-1294

Left Hand U/C Track Roller Frame 1 1 355-1295

1 Requires short equalizer bar of 1820 mm.

191


D10T, D10R U/C TRACK ROLLER FRAMESCAMBER ONLY WITHOUT ROLLERS AND IDLERS

QUANTITYPART

NUMBER



1 Requires short equalizer bar of 1820 mm.

192

Elevated Sprocket TractorsD10

D10 TRACKPOSITIVE PIN RETENTION (PPR) TRACK

84W, 76X10.25" (260.4 mm) PITCH -- 1-1/8" BOLT

QUANTITYPART

NUMBER


Track Links







Other Components

Pin 46 6Y-1579

Bushing 46 143-0746





Stopper 46 7G-4332

Plug 46 6Y-0473

Track Hardware 3

Bolt 180 5P-3868

Nut 180 5P-8221

Master Bolt 4 5P-8222

Special Sets/Groups




Thrust Ring Facing Group 1 239-5509

1 To be used at service time (turn or reseal) if bushing end grooving doesn't exceed 50%.2 352-9704 ring assembly contains two facing rings already applied to the 352-9703 thrust ring.3 Not part of link assembly; required to assemble track group.

193


D10 TRACKNON-POSITIVE PIN RETENTION (NON-PPR) TRACK

84W, 76X10.25" (260.4 mm) PITCH -- 1-1/8" BOLT

QUANTITYPART

NUMBER


Track Links







Other Components

Pin 45 6Y-1578


Bushing 46 143-0746




Retaining Ring 2 7G-3431

Stopper 46 7G-4332

Plug 46 6Y-0473

Track Hardware 2

Bolt 180 5P-3868

Nut 180 5P-8221


Special Sets/Groups



1 To be used at service time (turn or reseal) if bushing end grooving doesn't exceed 50%.2 Not part of link assembly; required to assemble track group.

D10 TRACK SHOES10.25" (260.4 mm) PITCH -- 1-1/8" BOLT

TYPE WIDTH

REGULARSHOE PART

NUMBER

MASTERSHOE PART

NUMBER

Moderate Service 32.0" (810 mm) 9W-5826 9W-1999

Extreme Service 28.0" (710 mm) 9W-4465 9W-1996

Extreme Service 32.0" (810 mm) 9W-5828 9W-1997

194


D10 SPROCKETS


NUMBER



Bolt 27 5P-5422


Washer 27 7X-0612

Nut 1 3 2M-5656

1 To be used with 157-4293 sprocket segment.

D10 IDLERS


NUMBER

Group 4 6Y-0236

Components of Group

Idler Assembly 1 6Y-0216

Bearing 1 2 9W-4195

Shaft 1 138-4330


Bolt 24 4K-5175

Washer 24 3H-7654




O-Ring 1 1 6V-2475

Seal -- Retainer 2 2K-2939

Stopper 1 9G-1368

Plug 1 6Y-0473

Mounting Hardware 2

End Cap 2 3T-1248

Bolt 4 8C-3435

Washer 4 4K-0684

Insert 2 3T-9075




O-Ring 1 1 6V-2475


195


D10 TRACK ROLLERS


NUMBER

Double Flange (DF) 8 3T-9530

Single Flange (SF) 8 7T-1826

Components of Group

Roller Shell (DF) 1 3T-9529

Roller Shell (SF) 1 7T-1825

Bearing 1 2 9W-4194

Shaft 1 8E-6653

Retainer 2 6Y-2508


Bolt 12 0S-1585




O-Ring 1 1 6V-2698


Stopper 1 9G-5664

Plug 1 6Y-0473

Mounting Hardware 2

End Cap 2 131-1649

Bolt 4 5P-3868

Washer 4 3S-1349

1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 These components are not included in the roller group; quantities shown are required to mount each roller.

D10 TRACK GUIDES


NUMBER

Guide 16 7T-1158

Bolt 32 1D-4639

D10 BOGIE PADS


NUMBER

Bogie Pad Assembly 16 3P-2482

Bolt 40 6K-7917

Bolt 24 5K-7143

Washer 64 5P-8245

196


D10 CARTRIDGE PINS


NUMBER



197


D11T, D11R, D11N TRACK4HK, 74Z, 7PZ, 8ZR, 9TR, 9XR, AAF, TPB, GEB

12.50" (317.5 mm) PITCH -- 1-3/8" BOLT

QUANTITYPART

NUMBER

Link Assembly -- 41 Section 2 316-3370 1

Track Links







Other Components

Pin 41 126-5343

Bushing 41 306-9425 2

Sleeve Bearing 82 215-7492





Stopper 41 7G-4332

Plug 41 6Y-0473

Track Hardware 5

Bolt 160 6T-8853 6

Nut 160 3T-6292



Special Sets/Groups



Retaining Ring Group (82 Retaining Rings) 1 6Y-1082


1 Effective serial numbers: GEB00320-UP, TPB00167-UP.2 Bushing replacement for Non Sleeve Bearing Track order 202-0908 bushing.3 To be used at service time (turn or reseal) if bushing end grooving doesn't exceed 50%.4 352-9712 ring assembly contains two facing rings already applied to the 352-9711 thrust ring.5 Not part of link assembly; required to assemble track group.6 Special coated bolt 135-6961, available for use in high corrosion applications.7 Contains 335 facing rings to service 2 link assemblies.

198


D11T, D11R, D11N MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIES

PPR TRACK

QUANTITYPART

NUMBER




Extreme Service Shoe -- 36" (915 mm) (Clipped) 2 215-7497

Extreme Service Shoe (ARM) -- 28" (710 mm) 2 242-6373


D11T, D11R, D11N MADE TO ORDER (MTO) TRACK GROUPS - HIGH ABRASION TRACK

QUANTITYPART

NUMBER



199


D11T, D11R, D11N TRACKHIGH ABRASION APPLICATION

4HK, 74Z, 7PZ, 8ZR, 9TR, 9XR, AAF, TPB, GEB12.50" (317.5 mm) PITCH -- 1-3/8" BOLT

QUANTITYPART

NUMBER


Track Links





RH Regular 40 200-6325

LH Regular 40 200-6326

Other Components

Pin 41 126-5343

Bushing 41 306-9425

Sleeve Bearing 82 215-7492





Stopper 41 7G-4332

Plug 41 6Y-0473

Track Hardware 3

Bolt 160 6T-8853 4

Nut 160 3T-6292



Special Sets/Groups


Seal Set (Post Turn Seal) (82 Assemblies) 1 1 261-4408

Retaining Ring Group (82 Retaining Rings) 1 6Y-1082


1 To be used at service time (turn or reseal) if bushing end grooving doesn't exceed 50%.2 352-9712 ring assembly contains two facing rings already applied to the 352-9711 thrust ring.3 Not part of link assembly; required to assemble track group.4 Special coated bolt 135-6961, available for use in high corrosion applications.5 Contains 335 facing rings to service 2 link assemblies.

200


D11T, D11R, D11N TRACK SHOES12.50" (317.5 mm) PITCH -- 1-3/8" BOLT

TYPE WIDTH

REGULARSHOE PART

NUMBER

MASTERSHOE PART

NUMBER



Extreme Service (Clipped Grouser) 36.0" (915 mm) 310-5827 310-5828

Extreme Service (ARM) 28.0" (710 mm) 310-5829 310-5830

Extreme Service (ARM) 32.0" (810 mm) 310-5831 310-5832

Extreme Service (Clipped Grouser) (ARM) 36.0" (915 mm) 310-5833 310-5834

Extreme Service (Trapezoidal Opening) 28.0" (710mm) 310-5835 310-5836


Extreme Service (Trapezoidal Opening) (Clipped Grouser) 36.0" (915 mm) 310-5839 310-5840


(PER SIDE ) QUANTITYPART

NUMBER



Bolt 32 7T-1243

Nut 32 3S-1356

Washer 32 3S-1349

D11T, D11R, D11N SPROCKETSSOUND REDUCED


NUMBER



Bolt 32 7T-1243

Nut 32 3S-1356

Washer 32 3S-1349

201


D11T, D11R, D11N IDLERSWITH 5/8" RETAINER MTG BOLT


EARLYPART

NUMBER

FORMERPART

NUMBERPART

NUMBER

Group 4 -- -- 187-1484 1

Components of Group

Idler Assembly 1 -- 2 -- 2 187-1011

Bearing 3 2 258-4614 258-4614 258-4614

Shaft 1 138-4331 156-5351 156-5351

Collar 2 -- 156-4653 156-4653

Retainer Assembly 4 2 146-5126 156-8357 188-1452

Bolt (5/8") 24 7B-1115 7B-1115 031-3185

Washer 24 5P-8247 5P-8247 5P-8247



Toric Ring 3 2 -- 160-6631 160-6631


Toric Ring 3 1 6H-1309 -- --

O-Ring 3 1 6V-2475 -- --

Seal -- Retainer 2 2K-2939 2K-2939 2K-2939

Seal -- Collar 2 -- 3K-0715 3K-0715

Stopper 1 9G-1368 9G-1368 9G-1368

Plug 1 6Y-0473 6Y-0473 6Y-0473

Mounting Hardware 5

End Cap (Two Bolt Design, Abutment Style) 6 2 306-9433 306-9433 306-9433

Bolt 4 8T-5881 8T-5881 8T-5881

Washer 4 7D-5238 7D-5238 7D-5238

End Cap (Three Bolt Design, Abutment Style) 6 1 306-9451 306-9451 306-9451

End Cap (Three Bolt Design, Abutment Style) 6 1 306-9453 306-9453 306-9453

Bolt 6 8T-5881 8T-5881 8T-5881

Washer 6 7D-5238 7D-5238 7D-5238

Insert 2 3T-9075 3T-9075 3T-9075

Special Application Idler Group

Idler Group (Arctic) 4 -- -- 245-9950


Toric Ring 3 2 -- 160-6631 160-6631

Seal -- Duo-Cone Group (Inverted) 2 6V-2615 -- --

Toric Ring 3 1 3P-1847 -- --

O-Ring 3 1 6V-2475 -- --

1 Idler with longer retainer bolts (Ref IRM UC 01-05). Effective serial numbers 7PZ00388 and AAF00139.2 Idler Assembly 148-3730 canceled and replaced by: (1) Idler Assembly 187-1011, (2) Retainer Assembly 188-1452, (24) Bolts 031-31853 Component of preceding assembly or group; quantity shown is quantity per assembly or group.4 Retainer Assembly and 1/2" hardware to be used with idler assembly 148-3729; (2) Retainer Assembly 137-3384, (24) Bolts 4K-5175, (24)Washers 3H-7654.5 These components are not included in the idler group; quantities shown are required to mount each idler.6 Effective serial numbers: 4HK624-UP.

202


D11T, D11R, D11N IDLERSSOUND REDUCED


NUMBER

Group 4 292-8090

Components of Group


Bearing 1 2 258-4614

Segment Assembly 16 292-8084

Segment Assembly (Position over slot in idler assembly) 4 292-8085

Bar (Install in slots with segment assembly 292-8085) 2 292-8081

Guide 6 292-8086

Bolt (1 1/4") (Guide to Segment Assemblies) 30 136-4188

Washer 30 4K-0684

Shaft 1 156-5351

Collar 2 156-4653


Bolt (5/8") 24 031-3185

Washer 24 5P-8247


Toric Ring 1 2 160-6631

Seal -- Retainer 2 2K-2939


Stopper 1 9G-1368

Plug 1 6Y-0473

Mounting Hardware 2

End Cap (Two Bolt Design, Abutment Style) 3 2 306-9433

Bolt 4 8T-5881

Washer 4 7D-5238



Bolt 6 8T-5881

Washer 6 7D-5238

Insert 2 3T-9075

1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 These components are not included in the idler group; quantities shown are required to mount each idler.3 Effective serial number: 5HK624-UP.

203




NUMBER


Mounting Hardware (New Design) 2

End Cap 2 306-9435

Block 2 224-5918

Bolt 4 9W-7269

Washer 4 4K-0684

Mounting Hardware (Former Design) 2

End Cap 4 9W-7267

Bolt 4 7X-0434

Washer 4 7X-0533


204


D11T, D11R, D11N TRACK ROLLERS


NUMBER



Single Flange (SF) (High Abrasion Applications) 2 16 200-5701

Components of Group



Roller Shell (SF) (High Abrasion Applications) 1 200-5702

Bearing 3 2 9W-4194

Shaft 1 155-2048

Retainer 2 180-4995

Collar 2 184-2607


Bolt 12 031-1382

Washer 12 5P-8247


Toric Ring 3 2 162-2168



Stopper 1 9G-4872

Plug 1 6Y-0473

Mounting Hardware (D11T) (Three Bolt Design) 4

End Cap (Three Bolt Design, Abutment Style) 1 306-9455

End Cap (Three Bolt Design, Abutment Style) 1 306-9457

Bolt 6 9W-7269

Washer 6 4K-0684

Mounting Hardware (D11R/N) (Two Bolt Design) 4

End Cap (Two Bolt Design, Abutment Style) 5 2 306-9435

Bolt 4 9W-7269

Washer 4 4K-0684





Toric Ring 3 2 162-2168

1 Effective serial numbers: 7PZ298-UP, AAF133-UP. Also refer to Service Magazine dated 02/14/00 for servicing former roller groups.2 To be used with 316-3369 Link Assembly3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.4 These components are not included in the roller group; quantities shown are required to mount each roller.5 Effective serial numbers: AAF0188-UP & 7PZ0581-UP.

205


D11T, D11R IDLER GUARDS7PZ1-UP, 9TR352-UP, 9XR165-UP, AAF1-UP


NUMBER

Standard Guard (Front Idlers Only)

Cover 2 162-8438

Bolt 10 7X-0345

Attachment Guards

Flexible Guard Assembly - Rear 2 139-2016

Plate 2 139-2011

Bolt (Use with one piece solid design) 6 7X-0350

Bolt (Use with three finger split design) 6 8T-6871

Washer 6 8T-4122

Side Guard Assembly - Rear 4 139-2015

Bolt 12 7X-0345

Washer 12 8T-4122

Flexible Guard Assembly - Front 2 139-2019

Plate 2 139-2011

Bolt 6 8T-6871

Washer 6 8T-4122



NUMBER

Guide 16 187-3298

Bolt 32 8T-8927

Washer 32 8T-5361



NUMBER

Bogie Pad Assembly 16 3P-2482

Bolt 64 5P-2228

Washer 64 5P-1076

D11T, D11R, D11N CARTRIDGE PINS


NUMBER



206


D11T, D11R, D11N U/C TRACK ROLLER FRAMESCAMBER ONLY WITH ROLLERS AND IDLERS

QUANTITYPART

NUMBER



1 Requires short equalizer bar of 2067.6 mm.

D11T, D11R, D11N U/C TRACK ROLLER FRAMESCAMBER ONLY WITHOUT ROLLERS AND IDLERS

QUANTITYPART

NUMBER



1 Requires short equalizer bar of 2067.6 mm.

207

SkiddersINDEX

SkiddersMODELS PAGE NO.

517 208..........................................................................................................................527 214..........................................................................................................................D4H 222.........................................................................................................................D5H 232.........................................................................................................................

208

Skidders517

517 HEAVY DUTY SEALED AND LUBRICATED TRACK5WW1-UP, 6PW1-UP

7.50" (190.5 mm) PITCH -- 3/4" BOLT

PARTNUMBER

7Roller Frame42 Section




Track Links





RH Regular 106-1625 41 43

LH Regular 106-1626 41 43

Other Components

Pin 154-7311 42 44

Bushing 106-1618 42 44


Thrust Ring 152-8070 84 88

Stopper 5G-2247 42 44

Plug 6Y-0473 42 44

Track Hardware 1

Bolt 6V-1792 164 172

Nut 1S-1860 164 172



Special Sets/Groups




209

Skidders517

517 HEAVY DUTY TRI-LINK TRACK7.50" (190.5 mm) PITCH -- 3/4" BOLT

PARTNUMBER



Link Assembly -- 44 Section 106-1638 148-2465

Track Links





RH Regular 106-1625 43 1 43 1

LH Regular 106-1626 43 2 43 2

Other Components

Stub Pin 106-1610 44 44

Stub Bushing 107-0720 44 44

Track Hardware (per side: Tri - 1 center chain & 1 outrigger) 3

Bolt 6V-1792 258 258

Nut 1S-1860 258 258



1 Required for right hand outrigger chain.2 Required for left hand outrigger chain.3 Not part of link assembly; required to assemble track group.

517 TRACK SHOES7.50" (190.5 mm) PITCH -- 3/4" BOLT

TYPE WIDTH

REGULARSHOE PART

NUMBER

MASTERSHOE PART

NUMBER

Moderate Service 22" (560 mm) 106-1607 106-1613


Moderate Service (Tri) (RH) 26" (660 mm) 148-2487 148-2594

Moderate Service (Tri) (LH) 26" (660 mm) 148-2494 148-2596

Moderate Service (Tri) (RH) (Clipped Grouser) 30" (760 mm) 163-2922 163-2923

Moderate Service (Tri) (LH) (Clipped Grouser) 30" (760 mm) 163-2924 163-2925

517 SPROCKETS


NUMBER



Bolt 23 6V-0937

Nut 23 7H-3607

Washer 23 2S-5658

210

Skidders517

517 IDLERS


NUMBER

Group 4 8E-4007

Components of Group

Idler Assembly 1 8E-4008

Bearing 1 2 9P-2245

Shaft 1 8E-4017

Retainer 2 9G-9349


Bolt 24 0S-1594

Washer 24 5M-2894




O-Ring 1 1 6V-2701

Seal -- O-Ring 2 2H-3928

Stopper 1 9G-5664

Plug 1 6Y-0473

Mounting Hardware 2

End Cap 2 149-1056

Block 2 149-1054

Bolt (20 mm) 4 8T-0655

Washer 4 8T-3282

1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 Not part of idler group; quantities required to mount each idler.

211

Skidders517

517 TRACK ROLLERS


NUMBER

Double Flange (DF) - 1 149-1051 2


Components of Group




Bearing 4 1 8P-6652

Shaft 1 131-8742 5




Seal - Duo-Cone Group 2 9W-5224


Seal - Bushing O-Ring 2 1H-6227

Seal - Shaft O-Ring 2 7F-8267

Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 6

Bolt (20 mm) 4 6V-3669

Washer 4 8T-3282

1 517 with 7 track rollers - SDSDSDS - Requires 6 DF; 517 with 8 track rollers - SDSDDSDS - Requires 8 DF.2 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247. Metric3 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247. Metric4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.5 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric HardwareServiced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247 or Serviced ReplacedBy: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric Hardware Serviced Replaced By: 1 -Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247. or Serviced Replaced By: 1 - Roller Group (DF)310-4918, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247. Metric6 These components are not included in the roller group; quantities shown are required to mount each roller.

212

Skidders517

517 END GUIDING GUARDS


NUMBER

Front



Wear Strip 1 8Y-1198


Bolt (1/2") 6 5P-2228

Washer (1/2") 6 8T-4223

Rear (Lower)





Bolt (1/2") 6 5P-2228

Washer (1/2") 6 8T-4223

Rear (Upper)



Wear Strip 2 9N-4733

Bolt (1/2") 4 5P-2228

Washer (1/2") 4 8T-4223

517 TRACK ROLLER GUARDS (FULL LENGTH)7 ROLLER FRAME


NUMBER

Guard 4 155-8399

Guard 4 155-8400

Bolt - Mounting (20 mm) 24 6V-3531

Washer (Mounting) 24 8T-3282

Spacer (Cross-Tube) 12 151-0926

Bolt - Cross-Tube Spacer (1") 12 6J-4081

Nut (1") 12 2J-3507

Plate 4 134-6093

Bolt (1/2") 8 8T-8917

Washer 8 8T-4223

Bar 1 8 6G-0712

Bar 1 8 9W-5449

Bar 1 4 127-0103

1 For use in severe skidding application. Weld to bolt heads on idler caps, end guiding guards, and guard plate.

213

Skidders517



NUMBER

Guard 4 151-0924

Guard 4 151-0925




Bolt - Cross-Tube Spacer (1") 14 6J-4081

Nut (1") 14 2J-3507

Plate 4 134-6093

Bolt (1/2") 8 8T-8917

Washer 8 8T-4223

Bar 1 8 6G-0712

Bar 1 8 9W-5449

Bar 1 4 127-0103

1 For use in severe skidding application. Weld to bolt heads on idler caps, end guiding guards, and guard plate.

214

Skidders527

527 HEAVY DUTY SEALED AND LUBRICATED TRACK7 ROLLER FRAME: 2RS, 3DS, 4NS

8 ROLLER FRAME: 4NS8.00" (203.2 mm) PITCH -- 3/4" BOLT

PARTNUMBER



Link Assembly (Quantity 2) 6I-9671 146-0020


Track Links

RH Pin End Master 8E-7407 1 1

LH Pin End Master 8E-7408 1 1





Other Components

Pin 160-7820 1 41 42

Bushing 8E-7222 41 42


Thrust Ring 152-8071 82 86

Stopper 5G-2247 41 42

Plug 6Y-0473 41 42

Track Hardware 2

Bolt 6V-1792 160 168

Nut 1S-1860 160 168

Master Bolt 9S-1838 4 4

Special Sets/Groups



1 Former pin 8E-7720 (Use 9G-1642 stopper).2 Not part of link assembly; required to assemble track group.

215

Skidders527

527 HEAVY DUTY SEALED AND LUBRICATED TRACKSUPER STEPPED BUSHING, 7 ROLLER FRAME

2RS, 3DS, BDW8.00" (203.2 mm) PITCH - 3/4" BOLT

NOT FOR NACD USE

QUANTITYPART

NUMBER



Track Links







Other Components

Pin 41 160-7820 1

Bushing 41 203-0306



Stopper 41 5G-2247

Plug 41 6Y-0473

Track Hardware 2

Bolt 160 6V-1792

Nut 160 1S-1860


Special Sets/Groups


1 Former pin 8E-7720 (Use 9G-1642 stopper).2 Not part of link assembly; required to assemble track group.

216

Skidders527

527 HEAVY DUTY TRI-LINK TRACK8.00" (203.2 mm) PITCH -- 3/4" BOLT

PARTNUMBER



Link Assembly (Quantity 2) 6I-9671 146-0020

Track Links





RH Regular 8E-7405 40 1 42 1

LH Regular 8E-7406 40 2 42 2

Other Components

Stub Pin 106-8237 41 43

Stub Bushing 106-8235 41 43

Track Hardware (Per side: Tri - 1 center chain & 1 outrigger) 3

Bolt 6V-1792 240 252

Nut 1S-1860 240 252




TYPE WIDTH

REGULARSHOE PART

NUMBER

MASTERSHOE PART

NUMBER

Extreme Service (Clipped Grouser) 23" (585 mm) 203-6580 203-7987

Moderate Service 22" (560 mm) 6Y-6286 6Y-6294

Moderate Service 24" (610 mm) 6Y-6287 6Y-6296

Moderate Service (Tri) (RH) 26" (660 mm) 133-0248 133-0246

Moderate Service (Tri) (LH) 26" (660 mm) 133-0249 133-0247

Moderate Service (Tri) (RH) (Clipped Grouser) 30" (760 mm) 133-0252 133-0250

Moderate Service (Tri) (LH) (Clipped Grouser) 30" (760 mm) 133-0253 133-0251

527 SPROCKETS


NUMBER


Bolt 25 6V-0937

Nut 25 7H-3607

Washer 25 2S-5658

217

Skidders527

527 SPROCKETSUSE WITH SUPER STEPPED BUSHING LINK ASSEMBLY


NUMBER


Bolt 25 6V-0937

Nut 25 7H-3607

Washer 25 2S-5658

218

Skidders527

527 IDLERS

(PER MACHINE) QUANTITYFORMER

PART NUMBERPART

NUMBER

Group (Small Diameter - 545 mm) 4 -- 206-2087 1

Components of Group

Idler Assembly 1 202-4295 1 202-4295 1

Bearing 2 1 9P-2245 9P-2245

Shaft 1 138-1725 160-9359

Collar 1 -- 107-3945

Retainer 2 9G-9349 149-2495

Thrust Washer 3 2 106-7691 106-7691

Bolt 24 0S-1594 1T-0765

Washer 24 5M-2894 5M-2894


Seal - Duo-Cone Group (Inverted Seal) 2 7T-0158 --


O-Ring 2 1 6V-2701 --

Seal - Duo-Cone Group (Symmetric Seal) 2 -- 162-7862

Toric Ring 2 1 -- 162-2166

Seal - Retainer 2 2H-3928 2H-3928

Seal - Collar 2 -- 7J-2036

Stopper 1 9G-5664 9G-5664

Plug 1 6Y-0473 6Y-0473

Mounting Hardware (Per Idler) 4


Block 1 165-6946 165-6946

Block/Cap 5 1 138-1726 138-1726

Bolt (20 mm) 4 6V-9167 6V-9167

Washer (20 mm) 4 8T-3282 8T-3282

Bolt (20 mm) 6 1 6V-3531 6V-3531

Washer (20 mm) 6 1 6C-9149 6C-9149


Seal - Duo-Cone Group 2 7T-4722 --


O-Ring 2 1 8T-2272 --

1 With Increased Tread Wear Material.2 Component of preceding assembly or group; quantities shown are per assembly or group.3 Use (1) Thrust Washer and (4) 2H-1190 Dowels to repair former 9G-9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 106-7691Thrust Washer. See Special Instruction SEHS8515.4 These components are not part of Idler Group; quantities required to mount each idler.5 Bolts to end of idler shaft.6 Required to secure shaft to special 138-1726 Block/Cap.

219

Skidders527

527 TRACK ROLLERS


NUMBER

Double Flange (DF) - 1 243-5325


Tall Flange Double Flange (TFDF) - 2 -- 3

Components of Group



Roller Shell (TFDF) 1 120-5804


Bearing 6 1 8P-5197

Shaft 7 1 138-1721




Seal - Duo-Cone Group 2 171-5882

Toric Ring 6 2 162-2166



Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 8

Dowel 7 8K-0589

Bolt (20 mm) 4 6V-5845

Washer (20 mm) 4 8T-3282


Seal - Duo-Cone Group (Steel Mill) 2 4S-8984


1 527 Grapple with 7 rollers - SDSDSDS - requires 6 DF; 527 Grapple with 8 rollers - SDSDDSDS - requires 8 DF.2 Optional DF roller for guiding; use quantity required for standard DF.3 To equip with tall flange rollers, standard tall flange roller groups must be reworked with special 138-1721 shaft.4 Serviced Replaced By 243-5325 Double Flange Roller Group.5 Serviced Replaced By 231-3093 Single Flange Roller Group.6 Component of previous assembly or group; quantity shown is per assembly or group.7 Use dowel to secure shaft to track roller frame.8 These components are not included in the roller group; quantities shown are required to mount each roller.

220

Skidders527



NUMBER

Front





Bolt (1/2") 12 5P-2228

Washer (1/2") 12 8T-4223

Rear (Lower)





Bolt (1/2") 12 5P-2228

Washer (1/2") 12 8T-4223

Rear (Upper)




Bolt (1/2") 8 5P-2228

Washer (1/2") 8 8T-4223



NUMBER

Guard 4 134-6091

Guard 4 134-6092




Bolt - Cross-Tube Spacer (1") 12 6M-2001

Nut (1") 12 2J-3507

Plate 4 134-6093

Bolt (1/2") 8 8T-8917

Washer 8 8T-4223

Bar 1 8 6G-0712

Bar 1 8 9W-5449

Bar 1 4 127-0103

1 For use in severe skidding applications. Weld to bolt heads on idler caps, end guiding guards, and guard plate.

221

Skidders527



NUMBER

Guard 4 148-2720

Guard 4 148-2721




Bolt - Cross-Tube Spacer (1") 14 6M-2001

Nut (1") 14 2J-3507

Plate 4 134-6093

Bolt (1/2") 8 8T-8917

Washer 8 8T-4223

Bar 1 8 6G-0712

Bar 1 8 9W-5449

Bar 1 4 127-0103

1 For use in severe skidding applications. Weld to bolt heads on idler caps, end guiding guards, and guard plate.

222

SkiddersD4H

D4H TSK HEAVY DUTY SEALED AND LUBRICATED TRACK 1

7PK147-UP6.75" (171.5 mm) PITCH -- 5/8" BOLT

QUANTITYPART

NUMBER


Track Links







Other Components

Pin 44 108-0943

Bushing 44 108-0944



Stopper 44 5G-2247

Plug 44 6Y-0473

Track Hardware 2

Bolt (Grouser shoe) 172 9G-3110

Nut 172 1M-1408

Master Bolt (Grouser Shoe) 2 9G-8592

Master Bolt (Grouser Shoe) 2 3T-8601

Master Bolt (Self-Cleaning Shoe) 2 9G-8592

Master Bolt (Self-Cleaning Shoe) 2 3T-3889

Special Sets/Groups


Bushing and Seal Group (39 Sections) 1 115-2438

1 When installing Heavy Duty Track on existing machines (7PK1-146,8ZF,9DB) refer to IRM UC94-18 for installation for guardinginformation. Also refer to Special Instruction SEHS9805 for additional guarding information.2 Not part of link assembly; required to assemble track group.

223

SkiddersD4H

D4H TSK, D4H CUSTOM SKIDDER SEALED AND LUBRICATED TRACK7PK1-146, 8ZF1-UP, 9DB1-UP

6.75" (171.5 mm) PITCH -- 5/8" BOLT

QUANTITYFORMER

PART NUMBERPART

NUMBER

Link Assembly -- 44 Section 2 -- 228-2744

Track Links

RH Pin End Master 1 9G-8583 6Y-9263

LH Pin End Master 1 9G-8584 6Y-9264

RH Bushing End Master 1 9G-8585 9G-8585

LH Bushing End Master 1 9G-8586 9G-8586

RH Regular 43 9G-8581 6Y-9261

LH Regular 43 9G-8582 6Y-9262

Other Components

Pin 44 154-3664 160-7816

Bushing 44 224-3959 224-3959

Seal Assembly 88 3T-5634 260-8739 1

Thrust Ring 88 9G-8591 6Y-6486

Stopper 44 5G-2247 5G-2247

Plug 44 6Y-0473 6Y-0473

Track Hardware 2

Bolt (Grouser shoe) 172 9G-3110 9G-3110

Nut 172 1M-1408 1M-1408

Master Bolt (Grouser Shoe) 2 9G-8592 9G-8592

Master Bolt (Grouser Shoe) 2 3T-8601 3T-8601

Master Bolt (Self-Cleaning Shoe) 2 9G-8592 9G-8592

Master Bolt (Self-Cleaning Shoe) 2 3T-3889 3T-3889

Special Sets/Groups

Seal Set (88 Seal Assemblies) 1 -- 252-7860

Bushing and Seal Group (39 Sections) 1 6Y-3879 227-9954

1 Rigid seal assembly.2 Not part of link assembly; required to assemble track group.

224

SkiddersD4H

D4H TSK HEAVY DUTY TRI/QUAD TRACK7PK147-UP

6.75" (171.5 mm) PITCH -- 5/8" BOLT

QUAD TRACKQUANTITY

TRI TRACKQUANTITY

PARTNUMBER


Track Links

RH Regular 44 44 2 108-0947

LH Regular 44 44 3 108-0948

Other Components

Stub Pin 88 44 108-2639


Bolt 344 258 9G-3110

Nut 344 258 1M-1408



1 Refer to Heavy Duty Track section for component information. For more information about Quad or Tri Link track, refer to IRM 91-18 andspecial instruction SEHS8881.2 Required for right hand outrigger chain.3 Required for left hand outrigger chain.4 Not part of link assembly; required to assemble track group.

D4H TSK, D4H CUSTOM SKIDDER SEALED AND LUBRICATED TRI/QUAD TRACK7PK1-146, 8ZF1-UP, 9DB1-UP

6.75" (171.5 mm) PITCH -- 5/8" BOLT

QUAD TRACKQUANTITY

TRI TRACKQUANTITY

PARTNUMBER


Track Links

RH Regular 44 44 2 6Y-9261

LH Regular 44 44 3 6Y-9262

Other Components

Stub Pin 88 44 6Y-9474

Stub Bushing 88 44 9W-7939Track Hardware (Per side: Quad -- 1 center chain & 2 outriggers; Tri-- 1 center chain & 1 outrigger) 4

Bolt 344 258 9G-3110

Nut 344 258 1M-1408



1 For additional information about Quad and Tri Link Tracks refer to IRM UC91-18 and Special Instruction SEHS8881.2 Required for right hand outrigger chain.3 Required for left hand outrigger chain.4 Not part of link assembly; required to assemble track group.

225

SkiddersD4H

D4H TSK, D4H CUSTOM SKIDDER TRACK SHOES6.75" (171.5 mm) PITCH -- 5/8" BOLT

TYPE WIDTH

REGULARSHOE PART

NUMBER

Extreme Service 18" (460 mm) 6Y-5624

Quad (MS) 23" (585 mm) 9W-7984

Quad (MS) 30" (760 mm) 9W-8326

Tri Offset RH (ES) 18" (460 mm) 8E-8526

Tri Offset LH (ES) 18" (460 mm) 8E-8527

D4H TSK, D4H CUSTOM SKIDDER SPROCKETSHEAVY DUTY / SEALED LUBRICATED TRACK


NUMBER


Bolt 20 3S-8182

Nut 20 7H-3607

Washer 20 6V-4316

226

SkiddersD4H

D4H TSK, D4H CUSTOM SKIDDER IDLERSSMALL DIAMETER


PART NUMBERPART

NUMBER

Idler Group 4 -- 190-1534 1

Components of Group

Idler Assembly 1 190-1536 2 190-1536 2

Bearing 3 2 8P-7002 8P-7002

Shaft 1 6T-2620 160-9757

Collar 2 -- 160-9756

Retainer 2 6T-2619 160-9761

Thrust Washer 2 137-9518 137-9518

Bolt 12 053-2294 4 053-2294 4

Washer 12 5M-2894 5M-2894




O-Ring 3 1 6V-2699 --


Toric Ring 5 2 -- 161-7249


Seal -- Collar 2 -- 5K-0216

Stopper 1 3T-9536 3T-9536

Plug 1 6Y-0473 6Y-0473

Mounting Hardware 6

End Cap 2 9N-4683 9N-4683

Block 2 9N-4680 9N-4680

Bolt (5/8") 4 1A-8651 1A-8651

Washer 4 5P-8247 5P-8247




O-Ring 5 1 6V-2699 --1 With Increased Tread Wear Material.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 Use 0S-1594 bolt with former idler assembly 7T-4399.4 Component of preceding assembly or group, quantity shown is quantity per assembly or group.5 These components are not included in the idler group; quantities shown are required to mount each idler.

227

SkiddersD4H

D4H TSK, D4H CUSTOM SKIDDER TRACK ROLLERSCURRENT DESIGN (END COLLARS, SYMMETRIC SEALS)


NUMBER




Components of Group





Shaft 1 131-7239








Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 3

Bolt (5/8") 4 1A-8537

Washer 4 5P-8247





228

SkiddersD4H

D4H TSK, D4H CUSTOM SKIDDER TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER)


PART NUMBER

Double Flange (DF) Roller Group 6 --

Single Flange (SF) Roller Group 8 --

Components of Group



Bearing 1 2 8P-7002

Shaft 1 8E-6573



Dowel 3 4 1L-5072

Bolt 12 0S-1594

Washer 12 5M-2894




O-Ring 1 1 6V-2699


Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 4

End Cap 2 7G-4829

Bolt (5/8") 4 1B-4367

Washer 4 5P-8247




O-Ring 1 1 6V-2699

1 Component of preceding assembly or group, quantity shown is quantity per assembly or group.2 Service Replaced by 237-8201.3 These components are only to repair retainer assembly. See Special Instruction SEHS8515.4 These components are not included in the roller group; quantities shown are required to mount each roller.

229

SkiddersD4H

D4H TSK END GUIDING GUARDSHEAVY DUTY TRACK ONLY


NUMBER

Front



Bolt 12 5P-2228

Washer 12 8T-4223

Strip 4 109-1708

Strip 4 109-1709

Rear (Lower)



Bolt 12 5P-2228

Washer 12 8T-4223

Strip 4 6Y-6382

Strip 4 6Y-6383

Rear (Upper)



Bolt 8 5P-2228

Washer 8 8T-4223

Strip 4 9N-4733

230

SkiddersD4H

D4H TSK, D4H CUSTOM SKIDDER END GUIDING GUARDSSEALED AND LUBRICATED TRACK ONLY


NUMBER

Front

Guard Assembly 2 9N-4736


Bolt 12 5P-2228

Washer 12 8T-4223

Strip 2 6Y-6380

Strip 2 6Y-6381

Rear (Lower)



Bolt 12 5P-2228

Washer 12 8T-4223

Strip 2 6Y-6382

Strip 2 6Y-6383

Rear (Upper)



Bolt 8 5P-2228

Washer 8 8T-4223

Strip 4 9N-4733

D4H TSK, D4H CUSTOM SKIDDER TRACK ROLLER GUARDS (FULL LENGTH)SEALED AND LUBRICATED AND HEAVY DUTY TRACK ONLY

Order cast guards from Spokan Industries (Phone: 1-800-541-3601)

231

SkiddersD4H

D4H TSK, D4H CUSTOM SKIDDER CENTER GUIDING GUARDSSEALED AND LUBRICATED TRACK ONLY


NUMBER


Bolt 4 5P-4625

Bolt 8 8T-8924

Bolt 16 7X-3328

Washer 8 8T-4122

Washer 16 8T-4223

Lock Nut 4 3K-2889

Tube 4 8V-4772

Bar 4 6Y-9935

Spacer 8 6K-5640

D4H TSK CENTER GUIDING GUARDSHEAVY DUTY TRACK ONLY


NUMBER


Bolt 8 8T-8924

Spacer 8 6K-5640

232

SkiddersD5H

D5H TSK HEAVY DUTY SEALED AND LUBRICATED TRACK 1

7EG1113-UP7.50" (190.5 mm) PITCH -- 3/4" BOLT

QUANTITYPART

NUMBER


Track Links







Other Components

Pin 42 154-7311

Bushing 42 106-1618



Stopper 42 5G-2247

Plug 42 6Y-0473

Track Hardware 2

Bolt (Grouser shoe) 164 6V-1792

Nut 164 1S-1860

Master Bolt (Grouser Shoe) 2 107-0719

Master Bolt (Grouser Shoe) 2 106-1642

Special Sets/Groups



1 When installing Heavy Duty Track on existing machines (4KD,7EG1-1112) refer to IRMs UC93-21 and UC94-17. Master shoe requiredwith heavy duty track. Also refer to Special Instruction SEHS9797 and SEHS9585 for additional guarding and track shoe rework options.2 Not part of link assembly; required to assemble track group.

233

SkiddersD5H

D5H TSK, D5H CUSTOM SKIDDER HYBRID TRACK4KD1-UP, 7EG1-1112

7.50" (190.5 mm) PITCH -- 5/8" BOLT

QUANTITYPART

NUMBER


Track Links







Other Components

Pin 42 160-7818 1

Bushing 42 229-6915

Seal Assembly 84 250-3988 2

Thrust Ring 84 6Y-6481

Stopper 42 5G-2247

Plug 42 6Y-0473

Track Hardware 3

Bolt 164 9G-3110

Nut 164 1M-1408



Special Sets/Groups



1 Former pin 3P-3880 (Use 9G-1642 stopper).2 Rigid seal.3 Not part of link assembly; required to assemble track group.

234

SkiddersD5H

D5H TSK, D5H CUSTOM SKIDDER SEALED AND LUBRICATED TRACK4KD1-UP, 7EG1-1112

7.50" (190.5 mm) PITCH -- 5/8" BOLT

QUANTITYFORMER

PART NUMBERPART

NUMBER

Link Assembly -- 42 Section 2 -- 6Y-5413 1

Track Links

RH Pin End Master 1 -- 8E-0885

LH Pin End Master 1 -- 8E-0886

RH Bushing End Master 1 -- 8E-0887

LH Bushing End Master 1 -- 8E-0888

RH Regular 41 3T-8405 6Y-9267

LH Regular 41 3T-8406 6Y-9268

Other Components

Pin 42 160-7818 2 160-7818 2

Bushing 42 6Y-0929 6Y-0929

Seal Assembly 84 3T-5631 288-8173 3

Thrust Ring 84 9G-3106 6Y-6481

Stopper 42 5G-2247 5G-2247

Plug 42 6Y-0473 6Y-0473

Track Hardware 4

Bolt 164 9G-3110 9G-3110

Nut 164 1M-1408 1M-1408



Special Sets/Groups


Bushing and Seal Group (37 Sections) 1 6Y-3880 6Y-5405

1 Service replaced by 238-6929 hybrid link assembly.2 Former pin 3P-3880 (Use 9G-1642 stopper).3 Rigid seal.4 Not part of link assembly; required to assemble track group.

235

SkiddersD5H

D5H TSK HEAVY DUTY TRI/QUAD TRACK 1

7.50" (190.5 mm) PITCH -- 3/4" BOLT

QUAD TRACKQUANTITY

TRI TRACKQUANTITY

PARTNUMBER


Track Links

RH Pin End Master 1 1 3 106-1627

LH Pin End Master 1 1 4 106-1628

RH Bushing End Master 1 1 3 106-1629

LH Bushing End Master 1 1 4 106-1630

RH Regular 41 41 106-1625

LH Regular 41 41 106-1626

Other Components

Stub Pin 84 42 106-1610


Bolt 328 246 6V-1792

Nut 328 246 1S-1860



1 Wehn installing Heavy Duty Track on existing machines (4KD, 7EG1-1112) refer to IRM UC94-18 installation and guarding information.Also refer to Special Instruction SEHS9805 for additional guarding information and SEHS9725 for shoe rework options. For moreinormation about Quad or Tri Link track, refer to IRM 91-18 and special instruction SEHS8881. Master shoe required with heavy dutytrack.2 Refer to Heavy Duty Track section for component information.3 Required for right hand outrigger chain.4 Required for left hand outrigger chain.5 Not part of link assembly; required to assemble track group.

D5H TSK, D5H CUSTOM SKIDDER SEALED AND LUBRICATED TRI/QUAD TRACKHYBRID TRACK DESIGN

7.50" (190.5 mm) PITCH -- 5/8" BOLT

QUAD TRACKQUANTITY

TRI TRACKQUANTITY

PARTNUMBER

Link Assembly -- 42 Section 2 2 238-6929

Track Links

RH Regular 42 42 1 229-6909

LH Regular 42 42 2 229-6910

Other Components

Stub Pin 84 42 9W-8182

Stub Bushing 84 42 9W-8183Track Hardware (Per side: Quad -- 1 center chain & 2 outriggers; Tri-- 1 center chain & 1 outrigger) 3

Bolt 328 246 9G-3110

Nut 328 246 1M-1408




1 When installing Heavy Duty Track on existing machines (4KD, 7EG1-1112) refer to IRM UC94-18 installation and guarding information. Also referto Special Instruction SEHS9805 for additional guarding information and SEHS9725 for shoe rework options. For more information about Quad orTri Link track, refer to IRM 91-18 and special instruction SEHS8881. Master shoe required with heavy duty track.2 Refer to Heavy Duty Track section for component information.3 Required for right hand outrigger chain.4 Required for left hand outrigger chain.5 Not part of link assembly; required to assemble track group.

236

SkiddersD5H

D5H TSK TRACK SHOESHEAVY DUTY SEALED AND LUBRICATED TRACK

7.50" (190.5 mm) PITCH -- 3/4" BOLT

TYPE WIDTH

REGULARSHOE PART

NUMBER

MASTERSHOE PART

NUMBER

Extreme Service 20" (510 mm) 106-1608 106-1617




Quad (MS) 26" (660 mm) 115-3328 115-3329

Quad (MS) 32" (810 mm) 115-3330 115-3331

Quad (ES) 26" (660 mm) 117-0519 117-0520

Quad (ES) 1 26" (660 mm) 127-6254 127-6255

Tri Offset RH (ES) 20" (510 mm) 107-0707 107-0708

Tri Offset LH (ES) 20" (510 mm) 107-0709 107-0710

Tri Offset RH (MS) 26" (660 mm) 148-2487 148-2594

Tri Offset LH (MS) 26" (660 mm) 148-2494 148-2596

Tri Offset RH (MS, Clipped) 30" (760 mm) 163-2922 163-2923

Tri Offset LH (MS, Clipped) 30" (760 mm) 163-2924 163-2925

1 Use with Heavy Duty Track bolt pattern for the center chain (3/4" bolt holes). Use the conventional Sealed and Lubricated Track boltpattern for the outrigger chains (5/8" bolt holes).

D5H TSK, D5H CUSTOM SKIDDER TRACK SHOESSEALED AND LUBRICATED TRACK7.50" (190.5 mm) PITCH -- 5/8" BOLT

TYPE WIDTH

REGULARSHOE PART

NUMBER


Moderate Service 16" (405 mm) 3T-8584



Quad (MS) 26" (660 mm) 9W-8191

Quad (MS) 32" (810 mm) 9W-5187

Extreme Service Tri Offset (RH) 20" (510 mm) 8E-8522

Extreme Service Tri Offset (LH) 20" (510 mm) 8E-8523

D5H TSK, D5H CUSTOM SKIDDER SPROCKETS


NUMBER


Bolt 25 6V-0937

Nut 25 7H-3607

Washer 25 2S-5658

237

SkiddersD5H

D5H TSK IDLERS


NUMBER

Group 4 8E-4007

Components of Group


Bearing 1 2 9P-2245

Shaft 1 8E-4017

Retainer 2 9G-9349


Bolt 12 0S-1594

Washer 12 5M-2894




O-Ring 1 1 6V-2701


Stopper 1 9G-5664

Plug 1 6Y-0473

Mounting Hardware 3

End Cap 2 8E-4015

Block 2 8E-4023

Bolt (3/4") 4 1D-4614

Washer (3/4") 4 5P-8248




O-Ring 4 1 8T-2272

1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 Use (1) 9G-9351 Thrust Washer and (4) 1L-5072 Dowels to repair former 6T-3283 Retainer Assembly. Use (1) 9W-2423 Thrust Washerand (4) 2H-1190 Dowels to repair former 9G-9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 106-7691 THRUST WASHER. SeeSpecial Instruction SEHS8515.3 These components are not included in the idler group; quantities shown are required to mount each idler.4 Use 0S-1594 bolt with former idler assembly 7T-4399.

238

SkiddersD5H

D5H CUSTOM SKIDDER IDLERS


PART NUMBERPART

NUMBER

Group 4 -- 190-1546 1

Components of Group

Idler Assembly 1 190-1547 1 190-1547 1

Bearing 2 2 9P-1360 9P-1360

Shaft 1 6T-3285 161-7350

Collar 2 -- 160-9756

Retainer 2 6T-3284 161-7550

Thrust Washer 3 1 110-3362 110-3362

Bolt 12 053-2294 4 053-2294 4

Washer 12 5M-2894 5M-2894




O-Ring 2 1 6V-2699 --

Seal -- Duo-Cone (Symmetric) 2 -- 161-7247

Toric Ring 2 2 -- 161-7249


Seal -- Collar 2 -- 5K-0216

Stopper 1 3T-9536 3T-9536

Plug 1 6Y-0473 6Y-0473

Mounting Hardware 5

End Cap 2 9N-4683 9N-4683

Block 2 9N-4680 9N-4680

Bolt (5/8") 4 1A-8651 1A-8651

Washer 4 5P-8247 5P-8247




O-Ring 2 1 6V-2699 --

1 With Increased Tread Wear Material.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 Use (1) 9G-9351 Thrust Washer and (4) 1L-5072 Dowels to repair former 6T-3283 Retainer Assembly. Use (1) 9W-2423 Thrust Washerand (4) 2H-1190 Dowels to repair former 9G-9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 106-7691 THRUST WASHER. SeeSpecial Instruction SEHS8515.4 Use 0S-1594 bolt with former idler assembly 6T-1763.5 These components are not included in the idler group; quantities shown are required to mount each idler.

239

SkiddersD5H

D5H TSK TRACK ROLLERSCURRENT DESIGN (END COLLARS, SYMMETRIC SEALS)


NUMBER

Roller Group (DF) / Machine 6 129-2978

Roller Group (SF) / Machine 8 129-2977

Roller Group (DF, Tall Flange) - 1 136-9349

Components of Group



Roller Shell (DF, Tall Flange) 1 121-0831 4


Bearing 5 1 8P-6652

Shaft 1 131-8742 6








Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 7

Bolt (3/4") 4 1D-4610

Washer (3/4") 4 5P-8248

1 Optional double flange roller for guiding; use quantity required for specific roller frame type.2 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric HardwareServiced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247.3 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric HardwareServiced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247.4 Serviced Replaced By: 1 - Roller Group (DF) 310-4918, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247. Metric5 Component of preceding assembly or group; quantity shown is quantity per assembly or group.6 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric HardwareServiced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247 or Serviced ReplacedBy: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric Hardware Serviced Replaced By: 1 -Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247. or Serviced Replaced By: 1 - Roller Group (DF)310-4918, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247. Metric7 These components are not included in the roller group; quantities shown are required to mount each roller.

240

SkiddersD5H

D5H CUSTOM SKIDDER TRACK ROLLERSCURRENT DESIGN (END COLLAR, SYMMETRIC SEALS)


NUMBER

Roller Group (DF) / Machine 6 121-0827 1

Roller Group (SF) / Machine 8 121-0824 2

Roller Group (DF, Tall Flange) - 3 121-0830 4

Components of Group





Bearing 5 1 8P-6652

Shaft 1 131-8742 6








Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 7

Bolt (5/8") 4 8S-9092

Washer (5/8") 4 5P-8247

1 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric HardwareServiced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247.2 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric HardwareServiced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247.3 Optional double flange roller for guiding; use quanity required for specific roller frame type.4 Serviced Replaced By: 1 - Roller Group (DF) 310-4918, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247. Metric.5 Component of preceding assembly or group; quantity shown is quantity per assembly or group.6 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric HardwareServiced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247 or Serviced ReplacedBy: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric Hardware Serviced Replaced By: 1 -Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247. or Serviced Replaced By: 1 - Roller Group (DF)310-4918, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247. Metric7 These components are not included in the roller group; quantities shown are required to mount each roller.

241

SkiddersD5H

D5H TSK, D5H CUSTOM SKIDDER TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER)


NUMBER



Components of Group



Bearing 1 2 9P-1360

Shaft 1 3T-9875



Dowel 2 4 1L-5072

Bolt 12 0S-1594

Washer 12 5M-2894




O-Ring 1 1 6V-2699


Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware (D5H TSK) 3

End Cap (3/4") 2 8E-0301

Bolt (3/4") 4 1D-4610

Washer (3/4") 4 5P-8248

Mounting Hardware (D5H Custom Skidder) 3

End Cap (5/8") 2 8E-0281

Bolt (5/8") 4 1B-4367

Washer (5/8") 4 5P-8247




O-Ring 4 1 6V-2699

1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 These components are only to repair retainer assembly. See Special Instruction SEHS8515.3 These components are not included in the roller group; quantities shown are required to mount each roller.4 Use 0S-1594 bolt with former idler assembly 7T-4399.

242

SkiddersD5H

D5H TSK END GUIDING GUARDSSEALED AND LUBRICATED AND HEAVY DUTY TRACK ONLY


NUMBER

Front



Bolt 12 5P-2228

Washer 12 8T-4223

Strip 2 8Y-1198 1

Strip 2 8Y-1199 2

Spacer 3 4 106-4402

Rear (Lower)



Bolt 12 5P-2228

Washer 12 8T-4223

Strip 2 8Y-1198 1

Strip 2 8Y-1199 2

Spacer 3 4 106-4402

Rear (Upper)



Bolt 8 5P-2228

Washer 8 8T-4223

Strip 4 9N-4733


243

SkiddersD5H

D5H CUSTOM SKIDDER END GUIDING GUARDSSEALED AND LUBRICATED AND HEAVY DUTY TRACK ONLY


NUMBER

Front



Bolt 12 5P-2228

Washer 12 8T-4223

Strip 2 8Y-1198 1

Strip 2 8Y-1199 2

Spacer 3 4 106-4402

Rear (Lower)



Bolt 12 5P-2228

Washer 12 8T-4223

Strip 2 8Y-1198 1

Strip 2 8Y-1199 2

Spacer 3 4 106-4402

Rear (Upper)



Bolt 8 5P-2228

Washer 8 8T-4223

Strip 4 9N-4733


D5H TSK TRACK ROLLER GUARDS (FULL LENGTH)SEALED AND LUBRICATED AND HEAVY DUTY TRACK ONLY

Order cast guards from Spokan Industries (Phone: 1-800-541-3601)

D5H TSK CENTER GUIDING GUARDSHEAVY DUTY TRACK ONLY


NUMBER


Bolt 8 7X-0347

Spacer 8 8G-5258

244

SkiddersD5H

D5H CUSTOM SKIDDER CENTER GUIDING GUARDSHEAVY DUTY TRACK ONLY


NUMBER


Bolt 12 7X-0347

Spacer 12 8G-5258

D5H TSK CENTER GUIDING GUARDSSEALED AND LUBRICATED TRACK ONLY


NUMBER


Bolt 8 7X-0347

Bolt 16 5P-2228

Washer 16 8T-4223

Strip 4 8G-5335

Spacer 8 8G-5258

D5H LGP CUSTOM SKIDDER CENTER GUIDING GUARDSSEALED AND LUBRICATED TRACK ONLY


NUMBER


Bolt 16 7X-0347

Bolt 6 5P-7971

Bolt 24 5P-2228

Washer 24 8T-4223

Lock Nut 6 3K-2889

Tube 6 4S-6559

Strip 4 6Y-3921

Spacer 16 8G-5258

Washer 6 5P-8247

245

Low Sprocket TractorsINDEX

Low Sprocket TractorsMODELS PAGE NO.

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3 246...................................................D5K, D5G, D5C 288.......................................................................................................D6K, PL61 315...............................................................................................................D4 319............................................................................................................................D5, 561 335....................................................................................................................D6 351............................................................................................................................D7E 377..........................................................................................................................D7, 571, 572 383............................................................................................................D8, 583 401....................................................................................................................D9, 594 417....................................................................................................................

246

Low Sprocket TractorsD3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3

D4K, D3K, D4G, D3G, D4C, D3C SEALED AND LUBRICATED TRACKLARGE STEPPED BUSHING

36 SECTION: STD (D3, D3B), LGP (D3)37 SECTION: STD (D3C/B, D4B), LGP (D3C), SPL (D3B)

39 SECTION: STD (D3C/B, D4C), LGP (D3G, D3C/B, D4C, D3), XL (D3G/C)41 SECTION: XL/LGP (D3K), XL (D4G/C), LGP (D4G))

43 SECTION: XL/LGP D4K6.125" (155.6 mm) PITCH - 9/16" BOLT

PARTNUMBER

36SECTION

37SECTION

39SECTION

41SECTION

43Section

Link Assembly (Quantity 2) 323-8758 323-8759 323-8757 323-8756 323-8755

Track Links

RH Pin End Master 6Y-0937 1 1 1 1 1

LH Pin End Master 6Y-0938 1 1 1 1 1

RH Bushing End Master 6Y-0939 1 1 1 1 1

LH Bushing End Master 6Y-0940 1 1 1 1 1

RH Regular 6Y-0935 35 36 38 40 42

LH Regular 6Y-0936 35 36 38 40 42

Other Components

Pin 303-9455 36 37 39 41 43

Bushing 188-6246 36 37 39 41 43

Seal Assembly (Rigid) 250-4002 72 74 78 82 86

Thrust Ring 6S-9049 72 74 78 82 86

Stopper 5G-2247 36 37 39 41 43

Plug 6Y-0473 36 37 39 41 43

Track Hardware 1

Bolt (Grouser Shoe) 4K-7038 140 144 152 160 168

Bolt (Self-Cleaning Shoe) 4K-7038 70 72 76 80 84

Bolt (Self-Cleaning Shoe) 5A-3187 70 72 76 80 84

Nut 7K-2017 140 144 152 160 168

Master Bolt (Grouser Shoe) 5A-3187 4 4 4 4 4

Master Bolt (Self-Cleaning Shoe) 5A-3187 2 2 2 2 2

Master Bolt (Self-Cleaning Shoe) 5P-4683 2 2 2 2 2

Special Sets/Groups

Seal Set (78 Seal Assemblies) 252-7861 1 1 1 1 1

1 Not part of link assembly, required to assemble track group.

247


D4K, D3K SystemOne TRACKTO BE WITH CENTER TREAD IDLER AND SystemOne ROLLERS

PRESS FIT MASTERD4K (38 SECTIONS)D3K (36 SECTIONS)

6.91" (175.5 mm) PITCH -- 16 mm BOLT

PART NUMBER36

SECTION38

SECTION

Link Assembly (2 Quantity) 289-3061 289-3059


Link Box Standard 289-3057 18 19



Track Hardware 1

Bolt (M16) (Grouser Shoe) 301-4302 144 152

Nut 5I-6125 144 152

Bolt (M16) (Self Cleaning Shoe 254-0228 72 76

Bolt (M16) (Self Cleaning Shoe) 301-4302 72 76

1 Not part of link assembly; required to assemble track group.2 Clamp Master links 2- 311-6180 and 4 -254-0228 Master Bolts

D4G, D3G SystemOne TRACKTO BE USED WITH CENTER TREAD IDLERS AND SystemOne ROLLERS

PRESS FIT MASTERD3G (35 SECTIONS)D4G (37 SECTIONS)

6.91" (175.5 mm) PITCH -- 16 mm BOLT

PART NUMBER35

SECTION37

SECTION




Link Box Offset 289-3058 1 1



Track Hardware 1

Bolt (M16) 301-4302 140 148

Nut 5I-6125 140 148


248


D3G/C, D4G/C SystemOne TRACKTO BE USED WITH CONVENTIONAL IDLERS AND STANDARD ROLLERS

PRESS FIT MASTERD3G/C (35 SECTIONS)D4G/C (36 SECTIONS)

6.91" (175.5 mm) PITCH -- 16 mm BOLT

PARTNUMBER

35SECTION

36SECTION




Link Box Offset 289-3058 1 --



Track Hardware 1

Bolt (M16) 301-4302 140 144

Nut 5I-6125 140 144


249


D3C/B, D4C/B, D3 SEALED AND LUBRICATED TRACK36 SECTION: STD (D3, D3B), LGP (D3)

37 SECTION: STD (D3C/B, D4B), LGP (D3C), SPL (D3B)39 SECTION: STD (D3C/B, D4C), LGP (D3C/B, D4C, D3), XL (D3C)

41 SECTION: D4C (XL)6.125" (155.6 mm) PITCH - 9/16" BOLT

PARTNUMBER

36SECTION

37SECTION

39SECTION

41SECTION

Link Assembly (2 Quantity) 323-8758 323-8759 323-8757 323-8756


Track Links

RH Pin End Master 6Y-0937 1 1 1 1

LH Pin End Master 6Y-0938 1 1 1 1

RH Bushing End Master 6Y-0939 1 1 1 1

LH Bushing End Master 6Y-0940 1 1 1 1

RH Regular 6Y-0935 35 36 38 40

LH Regular 6Y-0936 35 36 38 40

Other Components

Pin 154-3660 36 37 39 41

Bushing 111-1522 36 37 39 41


Thrust Ring 6S-9049 72 74 78 82

Stopper 5G-2247 36 37 39 41

Plug 6Y-0473 36 37 39 41

Track Hardware 1

Bolt 4K-7038 140 144 152 160

Nut 7K-2017 140 144 152 160

Master Bolt 5A-3187 4 4 4 4

Special Sets/Groups



250


D3C/B, D4C/B, D3 SEALED TRACK36 SECTION: STD (D3, D3B), LGP (D3)

37 SECTION: STD (D3C/B, D4B), LGP (D3C), SPL (D3B)39 SECTION: STD (D3C/B, D4C), LGP (D3C/B, D4C, D3), XL (D3C)

41 SECTION: D4C (XL)6.125" (155.6 mm) PITCH - 9/16" BOLT

PARTNUMBER

36SECTION

37SECTION

39SECTION

41SECTION

Link Assembly (2 Quantity) 6Y-1711 -- 1 6Y-1713 -- 1


Track Links

RH Pin End Master 6Y-0937 1 1 1 1

LH Pin End Master 6Y-0938 1 1 1 1

RH Bushing End Master 6Y-0939 1 1 1 1

LH Bushing End Master 6Y-0940 1 1 1 1

RH Regular 6Y-0935 1 1 1 1

LH Regular 6Y-0936 1 1 1 1

Other Components

Pin 6B-5278 36 37 39 41

Bushing 6Y-1717 36 37 39 41

Seal 6S-3146 144 148 156 164

Track Hardware 2

Bolt 4K-7038 140 144 152 160

Nut 7K-2017 140 144 152 160

Master Bolt 5A-3187 4 4 4 4

1 Order 36 Section 6Y-1711 or 39 Section 6Y-1713 Link Assembly and add or remove appropriate number of sections.2 Not part of link assembly; required to assemble track group.

251


D3 SEALED AND LUBRICATED TRACKFORMER, STRAIGHT WALL BUSHING, SPLIT MASTER LINKS

6.125" (155.6 mm) PITCH -- 9/16" BOLT

QUANTITYPART

NUMBER



Track Links

RH Pin End Master 1 6S-6889

LH Pin End Master 1 6S-6890

RH Bushing End Master 1 6S-6887

LH Bushing End Master 1 6S-6888

RH Regular 35 6S-8343

LH Regular 35 6S-8344

Other Components

Pin 36 154-3660

Bushing 36 6S-9051


Thrust Ring 72 6S-9049

Stopper 36 5G-2247

Plug 36 6Y-0473

Track Hardware 2

Bolt 140 4K-7038

Nut 140 7K-2017

Master Bolt 4 5A-3187

1 For 36 or 39 section link assemblies, upgrade by ordering 36 section 323-8758 or 39 section 323-8757 link assembly. This will requireordering new shoes to be used with "6Y" track links.2 Not part of link assembly; required to assemble track group.

252


D3 SEALED TRACKFORMER, STRAIGHT WALL BUSHING, SPLIT MASTER LINKS

6.125" (155.6 mm) PITCH -- 9/16" BOLT

QUANTITYPART

NUMBER



Track Links







Other Components

Pin 36 6B-5278

Bushing 36 6S-3178

Seal 144 6S-3146

Track Hardware 2

Bolt 140 4K-7038

Nut 140 7K-2017


1 For 36 or 39 section link assemblies, upgrade by ordering 36 section 6Y-1711 or 39 section 6Y-1713 link assembly. This will requireordering new shoes to be used with "6Y" track links.2 Not part of link assembly; required to assemble track group.

253


D3 TRACKFORMER, STRAIGHT WALL BUSHING, FULL LINK MASTER

6.125" (155.6 mm) PITCH -- 9/16" BOLT

QUANTITYPART

NUMBER



Track Links

RH Master (Full) 1 6S-8084

LH Master (Full) 1 6S-8085



Other Components

Pin 35 6B-5278

Master Pin 1 8L-5560

Bushing 35 6S-3178

Master Bushing 1 6S-3179

Seal 144 6S-3146

Spacer 2 6S-3145

Track Hardware 2

Bolt 144 4K-7038

Nut 144 7K-2017

1 For 36 or 39 section link assemblies, upgrade by ordering 36 section 6Y-1711 or 39 section 6Y-1713 link assembly. This will requireordering new shoes to be used with "6Y" track links.2 Not part of link assembly; required to assemble track group.

254


D3 TRACKEARLY (FORMER)

6.125" (155.6 mm) PITCH -- 1/2" BOLT

QUANTITYPART

NUMBER

Link Assembly -- 36 Section 2 6S-3142 1


Track Links





Other Components

Pin 35 6B-5278


Bushing 35 6S-3178


Seal 144 6S-3146

Spacer 2 6S-3145

Track Hardware 2

Bolt 144 8H-7504

Nut 144 6S-3419

1 For 39 section link assembly, order 36 Section 6S-3142 and add 3 sections.2 Not part of link assembly; required to assemble track group.

255


D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3 TRACK SHOESCURRENT MODEL, FOR USE WITH 6Y-0935/6Y-0936 TRACK LINKS

6.125" (155.6 mm) -- 9/16" BOLT

TYPE WIDTHREGULAR SHOEPART NUMBER

MASTER SHOEPART NUMBER STD XL LGP

Extreme Service (Clip) 1 16.0" (405 mm) 9N-4501 9N-4502 Y Y N

Moderate Service 1 14.0" (355 mm) 6Y-1328 6Y-1329 Y Y N

Moderate Service 1 16.0" (405 mm) 198-6987 198-6988 Y Y N

Moderate Service (Clip) 1 16.0" (405 mm) 6Y-1381 6Y-1382 Y Y N

Moderate Service 1 18.0" (460 mm) 198-6989 198-6990 N N Y

Moderate Service (Clip) 1 18.0" (460 mm) 6Y-5344 6Y-5345 N N Y





Double Grouser (Clip) 14.0" (355 mm) 9N-4174 9N-4175 Y Y N

Double Grouser (Clip) 25.0" (635 mm) 6Y-1589 6Y-1590 N N Y

Triple Grouser 14.0" (355 mm) 6Y-1596 6Y-1597 Y Y N

Triple Grouser (Rubber Bonded) 14.0" (355 mm) 9N-4328 9N-4327 Y Y N

Self Cleaning 25.0" (635 mm) 6S-9115 6S-9102 N N Y

1 Increased overlap shoe profile; for use with 6Y track links only.2 Use with Modification Ar.

D3C, D4C, D4B, D3B, D3 TRACK SHOESFORMER MODEL, FOR USE WITH 6S-8343/6S-8344 TRACK LINKS

6.125" (155.6 mm) -- 9/16" BOLT



Moderate Service 12.0" (305 mm) 6S-8814 6S-7123 Y Y N

Moderate Service 14.0" (355 mm) 6S-8815 6S-9057 Y Y N

Moderate Service 16.0" (405 mm) 9W-4334 9W-4335 Y Y N

Moderate Service 25.0" (635 mm) 6S-8824 6S-9059 N N Y

Double Grouser (Clip) 25.0" (635 mm) 6Y-1589 6Y-1590 N N Y

Triple Grouser 12.0" (305 mm) 6S-8823 6S-7124 Y Y N

Triple Grouser 14.0" (355 mm) 6Y-1596 6Y-1597 Y Y N

Self Cleaning 25.0" (635 mm) 6S-9115 6S-9102 N N Y

256


D3K/G/C, D4K/G/C SystemOne TRACK SHOES6.91" (175.5 mm)PITCH - 16 mm BOLT

TYPE WIDTHPART

NUMBER



Moderate Service (Clipped) 18.0" (460 mm) 246-5475

Moderate Service 25.0" (635 mm) 235-2558 1

Moderate Service (Clipped) 25.0" (635 mm) 246-5474

Self Cleaning 25.0" (635 mm) 238-8371

1 Master Shoe 263-3798

D3 TRACK SHOESEARLY -- FORMER MODEL, FOR USE WITH 6S-3143/6S-3144 TRACK LINKS

6.125" (155.6 mm) -- 1/2" BOLT

TYPE WIDTHREGULAR SHOEPART NUMBER STD LGP

Moderate Service 16.0" (405 mm) 6S-3422 Y N

Moderate Service (Clip) 25.0" (635 mm) 6S-7780 N Y

Triple Grouser (Slots) 14.0" (355 mm) 6S-3149 Y N

D3K, D4K, SEGMENTSUSE WITH LARGE STEPPED BUSHING


NUMBER



Bolt 31 9W-9265

Nut 31 8H-5724

Washer 31 5P-8246

D3K, D4K SystemOne SPROCKETUSE WITH CENTER TREAD IDLER


NUMBER

Sprocket (27 Tooth) 1 258-9787

Bolt 31 9W-9265

Nut 31 8H-5724

Washer 31 5P-8246

257


D3G, D4G, D3C, D4C, D4B, D3B, D3 SEGMENTS(USE WITH LARGE STEPPED BUSHING)


NUMBER


Adapter Ring 1 1 6Y-5499

Bolt 25 9W-9265

Nut 1 25 8H-5724

Washer 1 25 5P-8245

1 Not required for Hystat machines (only bolts).

D3G, D4G SystemOne SPROCKETUSE WITH CENTER TREAD IDLERS AND SystemOne ROLLERS


NUMBER



Bolt 25 9W-9265

D3G/C, D4G/C SystemOne SPROCKETSUSE WITH CONVENTIONAL IDLERS AND STANDARD ROLLERS


NUMBER



Bolt 25 9W-9265

Nut 1 25 8H-5724

Washer 1 25 5P-8245


D3G, D4G, D3C, D4C, D4B, D3B, D3 SEGMENTSFOR USE IN JAPAN ONLY


NUMBER


Adapter Ring 1 6Y-5499

Bolt 25 9W-9265

Nut 1 25 8H-5724

Washer 1 25 5P-8245


258


D3C, D4C, D4B, D3B, D3 SPROCKETSFORMER MODEL


NUMBER

Sprocket Assembly (25 Tooth) 1 8Y-0622

Rim (25 Tooth) 1 6Y-1244

D3K, D4K IDLERSCONVENTIONAL IDLER


NUMBER


Components of Idler

Idler Assembly and Bearing 2 106-9187

Idler Assembly 1 1 9N-4173

Bearing 1 2 6S-3495

Other Components

Shaft 1 254-0644

Thrust Washer 2 6S-7715

Bearing Block 2 254-0634




Plug 1 9F-2247

Pin - Spring 2 027-3873

1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

D4K, D3K SystemOne CENTER TREAD IDLERSCENTER TREAD IDLER


NUMBER


Components of Idler


Other Components

Shaft 1 254-0644






Plug 1 9F-2247

Pin - Spring 2 027-3873


259


D3G, D4G, IDLERSCONVENTIONAL IDLER


NUMBER

Idler Group 2 - 1

Components of Groups -


Idler Shell 1 9N-4173

Bushing Assembly 2 6S-3495

Bushing 2 1 6Y-4744

Shaft 1 6S-3697


Bearing Block (Out RH, In LH) 1 174-7002

Bearing Block (Out LH, In RH) 1 174-7001


Toric Ring 2 2 216-2956


Bolt 2 8C-6877

Washer 2 7X-0618

Lock 2 5M-5000

Plug 1 9F-2247


Seal -- Duo-Cone Group 2 5P-0373

Toric Ring 2 2 3N-3095

1 Order 184-6590 Idler Group.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

260


D3C, D4C, D4B, D3B, D3 IDLERSCURRENT MODEL


NUMBER

Idler Group 2 - 1



Idler Shell 1 9N-4173


Bushing 2 1 6Y-4744

Shaft 1 6S-3697


Bearing Block (Out RH, In LH) 1 6S-3451

Bearing Block (Out LH, In RH) 1 6S-3453


Toric Ring 2 2 216-2956


Bolt 2 8C-6877

Washer 2 7X-0618

Lock 2 5M-5000

Plug 1 9F-2247




1 Order 164-1047 Idler Group.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

D3G/C, D4G/C SystemOne CENTER TREAD IDLERS


NUMBER



Idler Assembly & Brg 1 249-7628

Shaft 1 6S-3697







Bolt 2 8C-6877

Washer 2 7X-0618

Lock 2 5M-5000

Plug 1 9F-2247


261


D3C, D4C, D4B, D3B, D3 IDLERSFORMER MODEL


NUMBER


Other Components (Per Idler)

Bearing (Sleeve) 1 2 6Y-4744

Shaft 1 8E-7343

Thrust Washer 2 6Y-2110

Bearing Block (Out RH, In LH) 1 8Y-1697

Bearing Block (Out LH, In RH) 1 8Y-1698




Bolt 2 8C-6877

Washer 2 7X-0618

Lock 2 5M-5000

Stopper 1 7G-4332

Plug 1 6Y-0473




Attachment

CounterWeight (Per Idler) 2 8Y-1817

Bolt 3 7X-0349

Washer 6 7X-0583

Nut 3 7X-0448

1 Component of Idler Assembly2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

262


D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3 CARRIER ROLLERS


NUMBER

Group 2 6S-3609

Components of Group

Roller Shell 1 172-0160

Shaft 1 6K-9861

Cup 2 1M-8736

Cone 2 1M-8735

Ring 1 1M-7914

Cover 1 4H-9527


Plate 1 6K-9860

Bolt 2 6V-4791

Bolt 5 0L-1351

Washer 5 3B-4506









D3K/G/C, D4K/G/C SystemOne CARRIER ROLLERS


NUMBER


263


D3K, D4K, TRACK ROLLERSD4K 7 ROLLER FRAMED3K 6 ROLLER FRAME


NUMBER

Double Flange (DF) (D4K) 6 301-0650

Single Flange (SF) (D4K) 8 301-0652

Double Flange (DF) (D3K) 4 301-0650

Single Flange (SF) (D3K) 8 301-0652

Components of Group

Roller Shell (DF) 1 6S-7040

Roller Shell (SF) 1 6S-7038


Bearing 1 1 6Y-4744

Shaft 1 6S-3171

Ring 2 6S-3172

End Collar 2 3T-4283



Toric Ring 1 2 216-2956

Seal -- Shaft O-Ring 2 7D-9749

Plug 1 9F-2247

Mounting Hardware 2

Plate 2 302-5722

Bolt (M16) 4 8T-0357

Washer 4 5P-8247





D3K, D4K SystemOne TRACK ROLLERSD4K 7 ROLLER FRAMED3K 6 ROLLER FRAME


NUMBER

Single Flange (SF) - 1 301-0654

Mounting Hardware 2

Bolt (16 mm) 4 8T-0088

Washer 4 5P-8247

1 12 required for D3K machines, and 14 required for D4K machines.2 These components are not included in the roller group; quantities shown are required to mount each roller.

264


D3G, D4G SystemOne TRACK ROLLERSUSE WITH CENTER TREAD IDLERS ONLY AND SystemOne SPROCKET


NUMBER


Mounting Hardware 2

Bolt (12 mm) 4 6V-8197

Washer 4 2M-0849

Plate (Between Collar and Frame) 2 203-4604

1 12 required for D3G machines, and 14 required for D4G machines.2 These components are not included in the roller group; quantities shown are required to mount each roller.

D3C, D4C, D4B, D3B, D3 TRACK ROLLERS5 ROLLER FRAME


NUMBER

Double Flange (DF) 4 281-8338


Components of Group




Bearing 1 1 6Y-4744

Shaft 1 6S-3171

Ring 2 6S-3172




Toric Ring 1 2 216-2956


Plug 1 9F-2247

Mounting Hardware 2

Bolt (1/2") 4 0S-1585

Washer 4 2M-0849





265


D3G XL/LGP, D3C, D4C, D4B, D3B, D3 TRACK ROLLERS6 ROLLER FRAME


NUMBER



Components of Group




Bearing 1 1 6Y-4744

Shaft 1 6S-3171

Ring 2 6S-3172




Toric Ring 1 2 216-2956


Plug 1 9F-2247

Mounting Hardware 2

Bolt (M12) (D3G) 4 6V-8197

Washer 4 2M-0849

Bolt (1/2") (D3C) 4 0S-1585

Washer 4 2M-0849





266


D4G XL/LGP, D4C XL TRACK ROLLERS7 ROLLER FRAME


NUMBER



Components of Group




Bearing 1 1 6Y-4744

Shaft 1 6S-3171

Ring 2 6S-3172




Toric Ring 1 2 216-2956


Plug 1 9F-2247

Mounting Hardware 2

Bolt (M12) (D4G) 4 6V-8197

Washer 4 2M-0849

Bolt (1/2") (D4C) 4 0S-1585

Washer 4 2M-0849





D4K, D3K SystemOne END GUIDING GUARDS (FRONT)WITH CENTER TREAD IDLER


NUMBER

Plate 2 310-7502

Plate 2 310-7503

Bolt (M10) 12 8T-0722

Washer 12 8T-4121

267


D3G/C, D4G/C SystemOne END GUIDING GUARDS (FRONT)USE WITH CONVENTIONAL IDLERS


NUMBER

Wear Strip 1 2 276-1711

Wear Strip 1 2 265-0946

1 These wear strips are to be welded to the existing guiding guards. Refer to Special Instruction "SystemOne Track GuidingArrangements", Media No. REHS3174, for proper positioning and welding guidelines.

D3G/C, D4G/C SystemOne END GUIDING GUARDS (FRONT)USE WITH CENTER TREAD IDLERS


NUMBER



Wear Strip (5 mm thick) (bottom) 8 265-0935

Wear Strip (16 mm thick) (next to frame) (bottom) 4 265-0949

Bolt (12 mm) 16 8T-4176

Washer 16 8T-4223

Wear Strip (5 mm thick) (on top of frame) 4 265-0935

Bolt (12 mm) 8 6T-4139

Washer 8 8T-4223

D4G, D3G END GUIDING GUARDS (FRONT)


NUMBER

Front



D4G, D3G END GUIDING GUARDS (FRONT)FOR MACHINE SERIAL NUMBER RSC


NUMBER

Front



268


D3G TRACK GUIDING GUARDS (REAR SPROCKET)(FOR MACHINE SERIAL NUMBER RSC)


NUMBER

Guard Assembly (RH Outer) 1 174-6992

Guard Assembly (LH Outer) 1 174-6993

Guard Assembly (RH Inner) 1 174-6994

Guard Assembly (LH Inner) 1 176-9728

Bolt (16 mm) 16 8T-4173

Washer 16 8T-4122



Bolt (12 mm) 8 8T-4139

Washer 8 5P-1076

Guard Assembly (Top RH) 1 174-6983

Guard Assembly (Top LH) 1 174-6985

Bolt (10 mm) 8 8T-4136

Washer 8 8T-4121

Guard 2 132-3861

Bolt (10 mm) 6 8T-4136

Washer 6 8T-4121

D4K TRACK GUIDING GUARDS (REAR SPROCKET)


NUMBER

Guard Assembly (Right Outer) 1 263-8355

Guard Assembly (Left Outer) 1 284-7832



Bolt (16 mm) 12 7X-2556

Washer 12 8T-4122

Guard Assembly (Right Upper) 1 263-8325

Guard Assembly (Left Upper) 1 263-8337

Bolt (12 mm) 4 8T-4139

Washer 4 5P-1076



Bolt (M12) 10 8T-4139

Washer 10 5P-1076

269


D3K TRACK GUIDING GUARDS (REAR SPROCKET)


NUMBER





Bolt (16 mm) 12 7X-2556

Washer 12 8T-4122



Bolt (12 mm) 4 8T-4139

Washer 4 5P-1076



Bolt (M12) 10 8T-4139

Washer 10 5P-1076

D4K SystemOne TRACK GUIDING GUARDS (REAR SPROCKET)


NUMBER





Bolt (16 mm) 12 7X-2556

Washer 12 8T-4122



Bolt (12 mm) 4 8T-4139

Washer 4 5P-1076



Bolt (M12) 10 8T-4139

Washer 10 5P-1076

270


D3K SystemOne TRACK GUIDING GUARDS (REAR SPROCKET)


NUMBER





Bolt (16 mm) 12 7X-2556

Washer 12 8T-4122



Bolt (12 mm) 4 8T-4139

Washer 4 5P-1076



Bolt (M12) 10 8T-4139

Washer 10 5P-1076

D3G XL LGP TRACK GUIDING GUARDS (REAR SPROCKET)


NUMBER





Bolt (16 mm) 16 7X-2556

Washer 16 8T-4122



Bolt (12 mm) 8 8T-4139

Washer 8 5P-1076



Bolt (10 mm) 6 8T-4136

Washer 6 8T-4121

Guard 2 128-9555

Bolt (10 mm) 2 8T-4136

Washer 2 8T-4121

Bolt (10 mm) 4 8T-4186

Washer 4 8T-4121

Spacer 4 130-1433

271


D4G TRACK GUIDING GUARDS (REAR SPROCKET)


NUMBER





Bolt (16 mm) 16 7X-2556

Washer 16 8T-4122



Bolt (12 mm) 8 8T-4139

Washer 8 5P-1076



Bolt (10 mm) 8 8T-4136

Washer 8 8T-4121

Guard 2 128-9555

Bolt (10 mm) 2 8T-4136

Washer 2 8T-4121

Bolt (10 mm) 4 8T-4186

Washer 4 8T-4121

Spacer 4 130-1433

272


D3C STD HYSTAT TRACK GUIDING GUARDS (REAR SPROCKET)4KS


NUMBER





Bolt 16 7X-0351

Washer 16 8T-4122



Bolt 8 5C-6565

Washer 8 5P-1076



Bolt 6 5S-7379

Washer 6 5P-1075

Guard 2 128-9555

Bolt 2 4L-6454

Washer 2 5P-1075

Bolt 4 7X-0288

Washer 4 5P-1075

Spacer 4 130-1433

273


D3G, D3C, XL/LGP SystemOne TRACK GUIDING GUARDS (REAR SPROCKET)


NUMBER





Washer 16 8T-4122



Bolt (12 mm) 8 8T-4139

Washer 8 5P-1076

Guard 2 128-9555

Spacer 4 130-1433

Bolt (10 mm) 4 8T-4186

Bolt (10 mm) 2 8T-4136

Washer 6 8T-4121



Bolt (10 mm) 6 8T-4136

Washer 6 8T-4121

Bolt (16 mm) (Guard Assembly to Frame) 16 7X-2556

D4G, D4C, XL/LGP SystemOne TRACK GUIDING GUARDS (REAR SPROCKET)


NUMBER





Bolt (16 mm) (Guard Assembly to Frame) 16 7X-2556

Washer 16 8T-4122



Bolt (12 mm) 8 8T-4139

Washer 8 5P-1076

Guard 2 128-9555

Spacer 4 130-1433

Bolt (10 mm) 4 8T-4186

Bolt (10 mm) 2 8T-4136

Washer 6 8T-4121



Bolt (10 mm) 8 8T-4136

Washer 8 8T-4121

274


D3C LGP HYSTAT, D3C XL HYSTAT, D4C STD HYSTAT, D4C LGP HYSTAT, D4C XL HYSTATTRACK GUIDING GUARDS (REAR SPROCKET)

4LS, 4TS, 5GS, 6BS, 8CS


NUMBER





Bolt 16 7X-0351

Washer 16 8T-4122



Bolt 8 5C-6565

Washer 8 5P-1076



Bolt 8 5S-7379

Washer 8 5P-1075

Guard 2 128-9555

Bolt 2 4L-6454

Washer 2 5P-1075

Bolt 4 7X-0288

Washer 4 5P-1075

Spacer 4 130-1433

275


D4C STD HYSTAT, D4C LGP HYSTAT TRACK GUIDING GUARDS (REAR SPROCKET)6FS, 7NS


NUMBER





Bolt (5/8") 12 7X-0343

Washer 12 7X-0591

Pipe 2 8Y-1009

Bolt (1/2") 2 6M-9613

Nut 2 6V-8188

Washer 4 8T-4223



Bolt (1/2") 8 5C-6565

Washer 8 5P-1076



Bolt (3/8") 8 5S-7379

Washer 8 5P-1075

Guard 2 128-9555

Bolt (3/8") 2 4L-6454

Washer 2 5P-1075

Bolt (3/8") 4 7X-0289

Washer 4 5P-1075

Spacer 4 7C-8246

D3C STD SERIES III TRACK GUIDING GUARDS (REAR SPROCKET)6SL2556-UP


NUMBER

Guard Assembly (Right Outer, Left Inner) 2 132-6615

Guard Assembly (Left Outer, Right Inner) 2 132-6622

Bolt (5/8") 16 7X-0351

Washer 16 8T-4122



Bolt (1/2") 16 5C-6565

Washer 16 5P-1076



Bolt (3/8") 6 5S-7379

Washer 6 5P-1075

276


D3C LGP SERIES III, D3C XL SERIES III, D4C STD SERIES III, D4C LGP SERIES III, D4C XLSERIES III TRACK GUIDING GUARDS (REAR SPROCKET)

1FW, 6YL1990-UP, 7SL674-UP, 7XL1108-UP, 8EL140-UP, 9TS


NUMBER



Bolt (5/8") 16 7X-0351

Washer 16 8T-4122



Bolt (1/2") 16 5C-6565

Washer 16 5P-1076

Guard Assembly

Top RH 1 148-5072

Top LH 1 148-5073

Bolt (3/8") 8 5S-7379

Washer 8 5P-1075

D4K TRACK ROLLER GUARDS FULL LENGTHUSE WITH TRACK GUIDING GUARDS REAR SPROCKET


NUMBER



Bolt (12 mm) 24 8T-4183

Spacer 24 145-5181

Bolt (12 mm) (Guard to Front Guide) 8 8T-4139

Washer 8 5P-1076

Bolt (M12) (Guard to Rear Guard) 4 8T-4194


Washer 8 7X-0550

277


D3K TRACK ROLLER GUARDS FULL LENGTHUSE WITH TRACK GUIDING GUARDS REAR SPROCKET


NUMBER



Bolt (12 mm) 20 8T-4183

Spacer 20 145-5181


Washer 8 5P-1076



Washer 8 7X-0550

D4K SystemOne TRACK ROLLER GUARDS FULL LENGTHUSE WITH TRACK GUIDING GUARDS REAR SPROCKET


NUMBER



Bolt (12 mm) 24 8T-4183

Spacer 24 145-5181


Washer 8 5P-1076



Washer 8 7X-0550

D3K SystemOne TRACK ROLLER GUARDS FULL LENGTHUSE WITH TRACK GUIDING GUARDS REAR SPROCKET


NUMBER



Bolt (12 mm) 20 8T-4183

Spacer 20 145-5181


Washer 8 5P-1076



Washer 8 7X-0550

278


D3C STD HYSTAT, D3C STD SERIES III TRACK ROLLER GUARDS (FULL LENGTH)5 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)


NUMBER



Bolt (1/2") 16 8T-8917

Washer 16 8T-4223

Pipe 8 8Y-1009

Bolt (1/2") 8 6M-9613

Nut 8 6V-8188

Washer 16 8T-4223

Tab (Front) 4 8Y-3413

Bolt (3/8") 4 4L-6454

Washer 4 8T-4896

Plate (Rear) 4 138-1946

Plate (Rear Threaded Holes) 4 138-1945

Bolt (1/2") 8 8T-8919

Washer 8 8T-4223

D3C XL, D3C LGP SERIES III, D3C LGP HYSTAT, D3C STD HYSTAT, D4C STD, D4C LGPSERIES III, D4C STD HYSTAT, D4C LGP HYSTAT TRACK ROLLER GUARDS (FULL LENGTH)

6 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)


NUMBER



Bolt (1/2") 16 8T-8917

Washer 16 8T-4223

Pipe 8 8Y-1009

Bolt (1/2") 8 6M-9613

Nut 8 6V-8188

Washer 16 8T-4223


Bolt (3/8") 4 4L-6454

Washer 4 8T-4896

Plate (Rear) 4 138-1946


Bolt (1/2") 8 8T-8919

Washer 8 8T-4223

279


D4C XL SERIES III, D4C HYSTAT TRACK ROLLER GUARDS (FULL LENGTH)7 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)


NUMBER



Bolt (1/2") 20 8T-8917

Washer 20 8T-4223

Pipe 10 8Y-1009

Bolt (1/2") 10 6M-9613

Nut 10 6V-8188

Washer 20 8T-4223


Bolt (3/8") 4 4L-6454

Washer 4 8T-4896

Plate (Rear) 4 138-1946


Bolt (1/2") 8 8T-8919

Washer 8 8T-4223

D3G TRACK ROLLER GUARDS (FULL LENGTH)6 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)


NUMBER



Bolt (12 mm) 16 8T-4956

Washer 16 8T-4223

Pipe 8 8Y-1009

Bolt (12 mm) 8 7X-3335

Washer 16 8T-4223

Nut 8 8T-4244


Bolt (10 mm) 4 8T-4136

Washer 4 8T-4121

Plate (Rear) 4 138-1946


Bolt (12 mm) 8 8T-4184

Washer 8 8T-4223

280


D4G TRACK ROLLER GUARDS (FULL LENGTH)7 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)


NUMBER



Bolt (12 mm) 20 8T-4956

Washer 20 8T-4223

Pipe 10 8Y-1009

Bolt (12 mm) 10 7X-3335

Washer 20 8T-4223

Nut 10 8T-4244


Bolt (10 mm) 4 8T-4136

Washer 4 8T-4121

Plate (Rear) 4 138-1946


Bolt (12 mm) 8 8T-4184

Washer 8 8T-4223

D3G XL/LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)USE WITH CENTER TREAD IDLERS


NUMBER



Washer (Guard Assembly to Frame) 16 8T-4223

Tube 8 8Y-1009

Bolt (12 mm) 8 7X-3335

Washer 16 8T-4223

Nut 8 8T-4244

Plate (Front) 4 276-1717

Plate (2 mm Thick) (Front) 4 276-1716

Bolt (10 mm) (Plate to Guard As.) 12 8T-4196

Washer 12 8T-4121

Plate (Rear) 4 180-7321

Plate (Rear) 4 276-1718

Bolt (102mm) (Plate to Guard Assembly) 8 8T-4183

Washer 4 8T-4123

Bolt (12 mm) (Guard Assembly to Frame) 16 8T-4956

281


D4G XL/LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)USE WITH CENTER TREAD IDLERS


NUMBER



Bolt (12 mm) (Guard Asembly to Frame) 20 8T-4956

Washer (Guard Assembly to Frame) 20 8T-4223

Tube 10 8Y-1009

Bolt (12 mm) 10 7X-3335

Washer 20 8T-4223

Nut 8 8T-4244

Plate (Front) 4 276-1717

Plate (2 mm Thick) (Front) 4 276-1716

Bolt (10 mm) (Plate to Guard As.) 12 8T-4196

Washer 12 8T-4121

Plate (Rear) 4 180-7321

Plate (Rear) 4 276-1718

Bolt (102mm) (Plate to Guard Assembly) 8 8T-4183

Washer 4 8T-4123

D3C TRACK ROLLER GUARDS (FULL LENGTH)5 ROLLER FRAME


NUMBER



Pipe 10 8Y-1009

Bolt 20 8T-8917

Bolt 10 7X-0471

Bolt 8 4L-6454

Washer 30 8T-4223

Washer 8 8T-4896

Tab 8 8Y-3413

Nut 10 6V-8188

282


D3C, D4C TRACK ROLLER GUARDS (FULL LENGTH)6 ROLLER FRAME


NUMBER



Pipe 10 8Y-1009

Bolt 20 8T-8917

Bolt 10 7X-0471

Bolt 8 4L-6454

Washer 30 8T-4223

Washer 8 8T-4896

Tab 8 8Y-3413

Nut 10 6V-8188

D4B, D3B, D3 TRACK ROLLER GUARDS (FULL LENGTH)79U4110-UP, 23Y, 27Y, 3YC


NUMBER

Guard Assembly 2 6S-9627


Pipe 12 6S-3429

Bolt 40 0S-1595

Bolt 12 2D-0516

Washer 52 5P-8245

Nut 14 1F-7958

D4B, D3B, D3 TRACK ROLLER GUARDS (FULL LENGTH)23Y, 24Y, 27Y, 28Y, 5MC, 3YC, 2XF, 1SG


NUMBER

Guard Assembly 2 5G-5965


Pipe 14 6S-3429

Bolt 44 0S-1595

Bolt 14 2D-0516

Washer 38 5P-8245

Nut 14 1F-7958

283


D3K CENTER GUIDING GUARDS


NUMBER


Bolt (M12) 8 8T-4194

Washer 8 198-4778

D3K SystemOne CENTER GUIDING GUARDS


NUMBER


Bolt (M12) 8 8T-4194

Washer 8 198-4778



NUMBER


Bolt (M12) 8 8T-4194

Washer 8 198-4778



NUMBER


Bolt (M12) 8 8T-4194

Washer 8 145-5181

D3G/C, D4G/C SystemOne CENTER GUIDING GUARDSUSE WITH CONVENTIONAL IDLERS

ROLLER POSITION #3 FOR D3G/C, #4 FOR D4G/C


NUMBER


Bolt (12 mm) 8 8T-4194

Washer 8 198-4778

284



NUMBER


Bolt (12 mm) 8 8T-4194

Washer 8 198-4778


NUMBER


Bolt (12 mm) 8 8T-4194

Washer 8 198-4778

D3C, D3B SPROCKET/IDLER TRACK FRAME GUARDS 1

STD


NUMBER

Roller Frame Guard (RH) 1 -- 2

Roller Frame Guard (LH) 1 -- 3

Idler Guard 2 8Y-8964

Sprocket Guard (RH) 1 8Y-8967

Sprocket Guard (LH) 1 8Y-8968

Wiper Guard (RH) 1 8Y-8977

Wiper Guard (LH) 1 8Y-8978

Bracket 2 6S-6741

Bolt 34 5S-7379

Bolt 6 8T-8917

Washer 34 5P-1075

Washer 6 8T-4223

1 This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose ofthe guarding is to shed material and prevent its entry into the undercarriage system (link box area).2 Guard (RH) 103-8835 serviced by (1) 139-5740 Guard Assembly and (1) 8Y-6640 Tab Assembly.3 Guard (LH) 103-8838 serviced by (1) 139-5739 Guard Assembly and (1) 8Y-6640 Tab Assembly.

D3G XL/LGP SystemOne CENTER GUIDING GUARDS(USE WITH CENTER TREAD IDLERS)

ROLLER POSITION #3

D4G XL/LGP SystemOne CENTER GUIDING GUARDS(USE WITH CENTER TREAD IDLERS)

ROLLER POSITION #4

285


D3C XL, D4C STD, D4B STD SPROCKET/IDLER TRACK FRAME GUARDS 1


NUMBER



Idler Guard 2 102-9920





Bracket 2 6S-6741

Bolt 34 5S-7379

Bolt 6 8T-8917

Washer 34 5P-1075

Washer 6 8T-4223

1 This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose ofthe guarding is to shed material and prevent its entry into the undercarriage system (link box area).2 Guard (RH) 103-8835 serviced by (1) 139-5740 Guard Assembly and (1) 8Y-6640 Tab Assembly.3 Guard (LH) 103-8838 serviced by (1) 139-5739 Guard Assembly and (1) 8Y-6640 Tab Assembly.

D3C, D4C, D4B SPROCKET/IDLER TRACK FRAME GUARDS 1

LGP


NUMBER








Bracket 2 6S-6741

Bolt 34 5S-7379

Bolt 6 8T-8917

Washer 34 5P-1075

Washer 6 8T-4223

1 This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose ofthe guarding is to shed material and prevent its entry into the undercarriage system (link box area).2 Guard (RH) 103-8836 serviced by (1) 139-5742 Guard Assembly and (1) 8Y6660 Tab Assembly.3 Guard (LH) 103-8837 serviced by (1) 139-5741 Guard Assembly and (1) 8Y6660 Tab Assembly.

286


D4K, D3K IDLER GUARDSCONVENTIONAL IDLER


NUMBER

Bracket Assembly (To Frame) 2 305-1443


Bolt (M12) (Bracket Assembly to Frame) 8 8T-4192

Washer 8 7X-0584

Guard 2 305-1448

Plate 4 305-1450

Plate 2 305-1449

Bolt (M12) (Plate and Guard to Bracket Assembly) 8 8T-4956

Washer 8 8T-4223

Plate 2 290-3391

Bolt (M10) 4 8T-4195

Washer 8 7X-7729

Nut (M10) 4 8T-4133

Bracket Assembly (Front) 2 305-1439


Bolt (M12) (Bracket Assembly to Bracket Assembly) 4 8T-4139

Bolt (M12) 8 8T-4184

Washer 12 8T-4223

D4K, D3K SystemOne IDLER GUARDSCENTER TREAD IDLER


NUMBER




Washer 8 7X-0584

Guard 2 305-1454

Plate 4 305-1455


Washer 8 8T-4223

Plate 2 290-3391

Bolt (M10) 4 8T-4195

Washer 8 7X-7729

Nut (M10) 4 8T-4133




Bolt (M12) 8 8T-4184

Washer 12 8T-4223

287


D3G, D4G, D3C, D4C IDLER ROCK GUARDS (WITHOUT COUNTER WEIGHT)


NUMBER



D3G, D4G, D3C, D4C IDLER ROCK GUARDS (WITH COUNTER WEIGHT)


NUMBER



288

Low Sprocket TractorsD5K, D5G, D5C

D5K XL/LGP SEALED AND LUBRICATED TRACKINCREASED STEPPED BUSHING

WWW, YYY, JLF6.75" (171.5 mm) PITCH 5/8" BOLT

QUANTITYPART

NUMBER



Track Links

RH Pin End Master 1 6Y-9263

LH Pin End Master 1 6Y-9264



RH Regular 39 6Y-9261

LH Regular 39 6Y-9262

Other Components

Pin 40 160-7816 1

Bushing 40 224-3959 2



Stopper 40 5G-2247

Plug 40 6Y-0473

Track Hardware 3

Bolt 156 9G-3110

Nut 156 1M-1408

Master Bolt 2 3T-8601

Master Bolt 2 9G-8592

Special Sets/Groups


Bushing and Seal Group (39 Sections) 1 227-9954 4

1 Former pin 6Y-9260 (Use 9G-1642 stopper).2 9G-8588 track bushing still available when servicing 6I-9527 & 6Y-5407 link assemblies.3 Not part of link assembly; required to assemble track group.4 Contains 224-3959 bushings.

289


D5K XL/LGP SystemOne TRACKPRESS FIT MASTER

WWW, YYY, JLF7.50" (190.5 mm) PITCH - 18 mm BOLT

QUANTITYPART

NUMBER

Link Assembly - 36 Section 2 235-2535


Link Box Standard 1 18 235-2536 2

Standard Link 34 235-2529

Standard Link (Press Fit) 3 2 235-2529 4

Track Hardware 3

Bolt (M18) 144 238-0472

Nut 144 238-0473

1 Link Box Standard that is greater than 40% worn should be replaced with part number 264-9766.2 Service Replaced by 311-6643.3 Not part of link assembly; required to assemble track group.4 Clamp Master links 2 - 318-2486 and 4 - 254-0227 Master Bolts

290


D5G XL/LGP,D5C STD/XL/LGP, SEALED AND LUBRICATED TRACKINCREASED STEPPED BUSHING

37 SECTION:D5C STD/LGP: 6PJ372-UP, 3MK243-UP, 9DL1-UP, 6ZL1-UP, 6CS1-UP39 SECTION :D5G XL/LGP, D5C XL: 7PS, 8ZS, FDH, CLF, FDW, CLW, WGB

6.75" (171.5 mm) PITCH -- 5/8" BOLT

PARTNUMBER 37 SECTION 39 SECTION


Components of Link Assembly (Current D4H)

Track Links

RH Pin End Master 6Y-9263 1 1

LH Pin End Master 6Y-9264 1 1

RH Bushing End Master 9G-8585 1 1

LH Bushing End Master 9G-8586 1 1

RH Regular 6Y-9261 36 38

LH Regular 6Y-9262 36 38

Other Components

Pin 160-7816 3 37 39

Bushing 224-3959 4 37 39


Thrust Ring 6Y-6486 74 78

Stopper 5G-2247 37 39

Plug 6Y-0473 37 39

Track Hardware 5

Bolt 9G-3110 144 152

Nut 1M-1408 144 152

Master Bolt 3T-8601 2 2

Master Bolt 9G-8592 2 2

Special Sets/Groups



1 6I-9527 link assembly with 9G-8588 bushing still avaliable in Japan.2 6Y-5407 link assembly with 9G-8588 bushing still avaliable in Japan.3 Former pin 6Y-9260 (Use 9G-1642 stopper).4 9G-8588 track bushing still avaliable when servicing 6I-9527 & 6Y5407 link assemblies.5 Not part of link assembly; required to assemble track group.6 Contains 224-3959 bushings.

291


D5G, D5C XL/LGP SystemOne TrackPRESS FIT MASTER

SystemOne ONLY FOR D5C WITH THE FOLLOWING SERIAL NUMBERS 4WS, 7PS, 8ZS6.75" (171.5 mm) PITCH - 16 mm BOLT

QUANTITYPART

NUMBER



Link Box Standard 18 312-2269 1

Link Box Offset 1 312-2271 2



Track Hardware 3

Bolt (M16) 156 218-3274

Nut 156 5I-6125

1 Link Box Standard that is greater than 40% worn should be replaced with part number 264-9765.2 Link Box Offset that is greater than 40% worn should be replaced with part number 264-9770.3 Not part of link assembly; required to assemble track group.4 Clamp Master links 2 - 235-2620 and 4 - 254-0227 Master Bolts

292


D5G XL/LGP, D5C STD/XL/LGP, ROTATING BUSHING TRACK 1

6.75" (171.5 mm) PITCH -- 5/8" BOLT




Track Links



RH Bushing End Master 4 109-0488 1 1

LH Bushing End Master 4 109-0489 1 1

RH Regular 4 109-0486 36 38

LH Regular 4 109-0487 36 38

Other Components

Pin 152-8075 37 39

Bushing 109-0478 37 39


Thrust Ring 152-8069 148 156

Stopper 5G-2247 37 39

Plug 6Y-0473 37 39

Track Hardware 5

Bolt 9G-3110 144 152

Nut 1M-1408 144 152

Master Bolt 9G-8592 2 2

Master Bolt 3T-8601 2 2

1 Rotating Bushing Track is an applicatioin specific undercarriage, designed for high abrasion/low impact applications (4000 hour systemlife or less). When installing Rotating Bushing Track on existing machines, refer to IRM UC98-19 for adaptablity, installation, andguarding information.2 Serviced replaced by 227-9960 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.3 Serviced replaced by 227-9976 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.4 Contains link and insert. Insert is not serviced.5 Not part of the link assembly; required to assemble track group.

293


D5C STD, D5C LGP SEALED AND LUBRICATED TRACKFORMER MODEL WITH 9K LINKS

6PJ1-371, 3MK1-2426.75" (171.5 mm) PITCH -- 5/8" BOLT

QUANTITYPART

NUMBER


Components of Link Assembly (Former D4E)

Track Links

RH Pin End Master 1 1V-4603

LH Pin End Master 1 1V-4604

RH Bushing End Master 1 1V-4605

LH Bushing End Master 1 1V-4606

RH Regular 36 9K-6629

LH Regular 36 9K-6628

Other Components

Pin 37 154-3664 2

Bushing 37 7T-4628


Thrust Ring 74 1V-3361

Stopper 37 5G-2247

Plug 37 6Y-0473

Track Hardware 3

Bolt 144 7H-3597

Nut 144 1M-1408


Special Sets/Groups



1 Upgrade to 227-9960 Link Assembly.2 Former pin 9K-8550 (Use 9G-1642 stopper).3 Not part of link assembly; required to assemble track group.

D5K, D5G, D5C TRACK SHOESCURRENT MODEL WITH 6Y LINKS & RBT LINK ASSEMBLY

TYPE WIDTH PART NUMBER STD XL LGP

Extreme Service 18.0" (460 mm) 6Y-5624 Y Y N

Extreme Service 20.0" (510 mm) 8E-9816 Y Y Y

Moderate Service 18.0" (460 mm) 3T-0360 Y Y N

Moderate Service 20.0" (510 mm) 8E-9812 Y Y Y

Moderate Service 26.0" (660 mm) 6I-9573 N N Y

Moderate Servcice (Use on Wide Gauge Machine Only) 30.0" (760 mm) 216-6286 N N Y

Double Grouser 16.0" (405 mm) 102-3585 Y Y N

Double Grouser 18.0" (460 mm) 102-3587 Y Y Y

294


D5K SystemOne TRACK SHOES7.50" (190.5 mm) PITCH - 18 mm BOLT

TYPE WIDTH PART NUMBERMASTER SHOE PART

NUMBER


Moderate Service 1 26.0" (660 mm) 235-2555 260-6762



Extreme Service 1 26.0" (660 mm) 327-5831 --

1 Use on LGP machines only.

D5G, D5C SystemOne™ TRACK SHOES6.75" (171.5 mm) PITCH - 16 mm BOLT

TYPE WIDTHPART

NUMBER



Moderate Service 1 26.0" (660 mm) 260-6770



1 Use on LGP machines only.

D5C TRACK SHOESFORMER MODEL WITH 9K LINKS



Extreme Service 20.0" (510 mm) 2V-3819 5V-2906 Y Y Y


Moderate Service 20.0" (510 mm) 206-3511 206-3519 Y Y Y

Double Grouser 18.0" (460 mm) 8E-4799 8E-4800 Y Y Y

D5K SPROCKETS


NUMBER



Bolt 27 6V-0937

Nut 27 7H-3607

Washer 27 6V-4316

295


D5K SystemOne SPROCKETS


NUMBER


Bolt 27 6V-0937

Nut 27 7H-3607

Washer 27 6V-4316

D5G, D5C SPROCKETSSealed and Lubricated, Rotating Bushing, and SystemOne Track


NUMBER

Sprocket Segment (Tough Steel) (4 Tooth) 2 197-9677 1


Bolt 23 6V-0937

Nut 3 23 7H-3607

Washer 3 23 2S-5658

1 Segment 114-9278 available for use in Japan.2 Segment 6I-9526 available for use in Japan.3 Not required for Hystat machines (only bolts).

D5K IDLERSCONVENTIONAL IDLER


NUMBER



Bearing 1 2 243-5321

Other Components

Shaft 1 254-0645



Toric Ring 1 2 6Y-2270


Plug 1 9F-2247

Pin - Spring 2 027-3873


296


D5K SystemOne CENTER TREAD IDLER


NUMBER



Bearing 1 2 243-5321

Other Components

Shaft 1 254-0645





Plug 1 9F-2247

Pin - Spring 2 027-3873


D5G IDLERS


NUMBER

Idler Group 2 - 1

Components of Group

Idler 2 9U-9065

Bushing Assembly 2 1V-9611

Bushing 2 1 7K-1089

Shaft 1 8E-7899



Seal -- Duo-Cone Group 2 2M-2858 3


Seal 2 1H-8128

Seal 2 7F-8267

Bolt 12 9B-7237

Washer 12 8T-4896

Lock 2 5M-5000

Bolt 2 8C-6877

Washer 2 7X-0618

Stopper 1 7G-4332

Plug 1 6Y-0473




1 Order 184-6592 Idler Group.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 Serviced Replaced By: 9W-5224.

297


D5C IDLERS


NUMBER

Idler Group 2 -- 1

Components of Group

Idler 2 9U-9065


Bushing 2 1 7K-1089

Shaft 1 8E-7899

Bearing Block 1 8Y-6650




Seal 2 1H-8128

Seal 2 7F-8267

Bolt 12 9B-7237

Washer 12 8T-4896

Lock 2 5M-5000

Bolt 2 8C-6877

Washer 2 7X-0618

Stopper 1 7G-4332

Plug 1 6Y-0473




1 Order 185-4038 Idler Group.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 Serviced Replaced By: 9W-5224.

298


D5G, D5C SystemOne CENTER TREAD IDLER

QUANTITYPART

NUMBER

Idler Group 2 250-0367 1

Components of Group


Shaft 1 243-5319




Toric Ring 2 2 160-6631

Seal - Shaft 0-Ring 2 7F-8267

Lock 2 5M-5000

Bolt 2 053-2294

Washer 2 5M-2894

Stopper 1 7G-4332

Plug 1 9F-2247

1 When installing Center Tread Idler for the first time, new yoke assembly, rock guards, carrier roller bracket assembly, and front endguiding guards are required.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

299


D5K, D5G, D5C CARRIER ROLLERS


NUMBER

Group 2 6K-9880

Components of Group


Shaft 1 6K-9861

Plate 1 6K-9860

Bolt 2 6V-4791

Cup 2 1M-8736

Cone 2 1M-8735

Ring 1 1M-7914

Cover 1 3K-6638


Plug 1 2P-0347

Bolt 3 0L-1351









1 Component of preceding assembly or group; quantity shown is the quantity per group.

D5K, D5G, D5C SystemOne CARRIER ROLLERS


NUMBER


300


D5K, D5G, D5C TRACK ROLLERSCURRENT DESIGN END COLLLARS, SYMMETRIC DESIGN


NUMBER

Roller Group (DF) 4 1 124-8240

Roller Group (SF) 8 124-8237

Roller Group (DF, Tall Flange) - 2 124-8243

Components of Group





Shaft 1 131-7239








Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 4

Bolt (16 mm) (D5K, D5G) 4 8T-0357

Bolt (5/8") (D5C) 4 1A-8537

Washer 4 5P-8247




1 6 Double Flange Roller Groups required for D5K XL/LGP, D5G XL/LGP, D5C XL/LGP machines.2 Optional DF roller for guiding; use quantity required for specific roller frame type.3 Components of preceding assembly or group; quantity shown is quantity per assembly or Group.4 These components are not included in the roller group; quantities shown are required to mount each roller.

D5K, D5G SystemOne TRACK ROLLERS


NUMBER


Mounting Hardware 1

Bolt (16 mm) 4 8T-0357

Washer 4 5P-8247


301


D5C SystemOne TRACK ROLLERS


NUMBER


Mounting Hardware 1

Bolt (5/8") 4 1A-8537

Washer 4 5P-8247


D5C TRACK ROLLERSFORMER DESIGN BOLT-ON RETAINER


NUMBER

Roller Group (DF) / Machine 4 --

Roller Group (SF) / Machine 8 --

Components of Group



Bearing 1 2 8P-7002

Shaft 1 8E-6573



Dowel 3 4 1L-5072

Bolt 12 0S-1594

Washer 12 5M-2894




O-Ring 1 1 6V-2699


Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 4

End Cap 2 7G-4829

Bolt (5/8") 4 1B-4367

Washer 4 5P-8247




O-Ring 1 1 6V-2699

1 Components of preceding assembly or group; quantity shown is quantity per assembly or Group.2 Service Replaced by 237-8201.3 These components are only to repair retainer assembly. See Special Instruction SEHS8515.4 These components are not included in the roller group; quantities shown are required to mount each roller.

302


D5K XL, LGP TRACK GUIDING GUARDS (REAR SPROCKET)


NUMBER





Bolt (16 mm) 12 8T-4173

Washer 12 8T-4122



Bolt (12 mm) 4 8T-4139

Washer 4 5P-1076



Bolt (M12) 4 8T-4183

Bolt (M12) 4 8T-4139

Washer 8 5P-1076

D5K XL, LGP SystemOne TRACK GUIDING GUARDS (REAR SPROCKET)


NUMBER





Bolt (16 mm) 12 8T-4173

Washer 12 8T-4122



Bolt (12 mm) 4 8T-4139

Washer 4 5P-1076



Bolt (M12) 4 8T-4183

Bolt (M12) 4 8T-4139

Washer 8 5P-1076

303


D5G XL, LGP TRACK GUIDING GUARDS (REAR SPROCKET)


NUMBER





Bolt (16 mm) 16 8T-4173

Washer 16 8T-4122

Guard Assembly (Right Inner) 1 132-3831

Guard Assembly (Left Inner) 1 132-3832

Bolt (12 mm) 8 8T-4139

Washer 8 5P-1076

Guard 2 132-3861

Bolt (10 mm) 6 8T-4136

Washer 6 8T-4121



Bolt (10 mm) 8 8T-4136

Washer 8 8T-4121

D5G XL, LGP SystemOne TRACK GUIDING GUARDS (REAR SPROCKET)


NUMBER





Bolt (16 mm) 16 8T-4173

Washer 16 8T-4122



Bolt (12 mm) 8 8T-4139

Washer 8 5P-1076

Guard 2 132-3861

Bolt (10 mm) 6 8T-4136

Washer 6 8T-4121



Bolt (10 mm) 8 8T-4136

Washer 8 8T-4121

304


D5C XL/LGP SystemOne TRACK GUIDNG GUARDS (REAR SPROCKET) 1


NUMBER





Bolt (5/8") 16 7X-0353

Washer 16 8T-4122



Bolt (12 mm) (Lower Position) 4 8T-4139

Bolt (1/2") (Upper Position) 4 5C-6565

Washer 8 5P-1076

Guard 2 132-3861

Bolt (10 mm) (Lower Position) 4 8T-4136

Washer 4 8T-4121

Bolt (3/8") (Upper Position) 2 4L-6454

Washer 2 5P-1075



Bolt (3/8") 8 4L-6454

Washer 8 5P-1075

1 When installing rear sprocket guard it will require using both inch and metric hardware. The inch hardware called in the this table isrequired to bolt guard assemblies to the D5C track roller frame, which has inch threads.

305


D5C HYSTAT TRACK GUIDING GUARDS (REAR SPROCKET)4WS, 5HS, 6CS, 7PS, 9AS


NUMBER





Bolt (5/8") 16 7X-0353

Washer 16 8T-4122



Bolt (1/2") 8 5C-6565

Washer 8 5P-1076

Guard 2 132-3861

Bolt (3/8") 6 4L-6454

Washer 6 5P-1075



Bolt (3/8") 4 4L-6454

Bolt (3/8") 4 5S-7379

Washer 8 5P-1075

D5C TRACK GUIDING GUARDS (REAR SPROCKET)6ZL795-UP, 7YL121, 8ZS1-UP, 9DL2236-UP


NUMBER



Bolt (5/8") 16 7T-0353

Washer 16 8T-4122



Bolt (1/2") 16 5C-6565

Washer 16 5P-1076

Guard Assembly (Top RH and LH) 2 132-4912

Bolt (3/8") 4 4L-6454

Bolt (3/8") 4 5S-7379

Washer 8 5P-1075

306


D5K XL, LGP SystemOne END GUIDING GUARDS (FRONT)


NUMBER

Plate 2 310-7375

Plate 2 310-7376

Bolt (M10) 16 8T-0722

Washer 16 8T-4121

D5G, D5C, XL LGP END GUIDING GUARDS (FRONT)


NUMBER

Front



D5C END GUIDING GUARDS


NUMBER

Front (Outer LH, Inner RH)



Front (Outer RH, Inner LH)



Rear (Outer RH, Inner LH)


Rear (Outer LH, Inner RH)


307


D5G, D5C XL/LGP SystemOne END GUIDING GUARDS (FRONT)REQUIRED WITH CENTER TREAD IDLERS


NUMBER



Strip - Wear (20 mm Thick) 1 4 265-0934

Strip - Wear (5 mm Thick) 1 8 265-0935

Bolt (12 mm) 16 8T-4176

Washer 16 8T-4223

Strip - Wear (5 mm Thick) (Place on Top of Frame) 4 265-0935

Bolt (12 mm) 8 8T-4139

Washer 8 8T-4223

1 Place between bottom of track roller frame and guard assembly.

D5G, D5C XL/LGP SystemOne END GUIDING WEAR STRIPS (FRONT)REQUIRED WITH CONVENTIONAL IDLERS


NUMBER

Wear Strip (Wear Strip) 1 2 250-9505

Wear Strip (38 mm Thick) 1 2 265-0929

1 Remove current wear strips from existing front end guiding guards, weld a 5 mm shim (supplied by the dealer) and wear strips toexisting front end guiding guards.

D5K XL/LGP TRACK ROLLER GUARD (FULL LENGTH)USE WITH REAR SPROCKET GUARDS


NUMBER



Bolt (12 mm) 24 8T-4184

Spacer 24 145-5181


Washer 8 5P-1076

Bolt (M16) (Guard to Rear Guard) 4 7X-2553

Washer 4 8T-4122


Washer 4 7X-0550

308


D5K, XL LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)USE WITH REAR SPROCKET GUARD


NUMBER



Bolt (12 mm) 24 8T-4184

Spacer 24 145-5181


Washer 8 5P-1076

Bolt (M16) (Guard to Rear Guard) 4 7X-2553

Washer 4 8T-4122


Washer 4 7X-0550

D5G XL LGP TRACK ROLLER GUARDS (FULL LENGTH)USE WITH REAR SPROCKET GUARD


NUMBER



Bolt (12 mm) 20 8T-4956

Washer 20 2M-0849

Pipe 10 8Y-7125

Bolt (12 mm) 10 152-7146

Washer 20 8T-4223

Nut 10 8T-4244


Bolt (10 mm) 4 8T-4136

Washer 4 8T-4121

Plate (Rear) 4 138-1946


Bolt (12 mm) 8 8T-4184

Washer 8 5P-8245

309


D5G, D5C XL/LGP SystemOne TRACK ROLLER GUARD (FULL LENGTH)


NUMBER



Bolt (12 mm) (Guard As. to Frame) 20 8T-4956

Washer 20 2M-0849

Pipe 10 8Y-7125

Bolt (12 mm) 10 152-7146

Washer 20 8T-4223

Nut 10 8T-4244

Bolt (10 mm) (Guard As. To Front Guard) 4 8T-4195

Washer 4 8T-4121

Plate (Rear) 4 276-1718


Bolt (12 mm) 8 8T-4183

Washer 8 5P-8245

D5C STD, D5C LGP TRACK ROLLER GUARDS (FULL LENGTH)6 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)


NUMBER



Bolt (1/2") 16 8T-8917

Washer 16 8T-4223

Pipe 8 8Y-7125

Bolt (1/2") 8 8S-3887

Nut 8 6V-8188

Washer 8 8T-4223


Bolt (3/8") 4 4L-6454

Washer 4 8T-4896

Plate (Rear) 4 138-1946


Bolt (1/2") 8 8T-8919

Washer 8 5P-8245

310


D5C XL TRACK ROLLER GUARDS (FULL LENGTH)7 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)


NUMBER



Bolt (1/2") 20 8T-8917

Washer 20 8T-4223

Pipe 10 8Y-7125

Bolt (1/2") 10 8S-3887

Nut 10 6V-8188

Washer 10 8T-4223


Bolt (3/8") 4 4L-6454

Washer 4 8T-4896

Plate (Rear) 4 138-1946


Bolt (1/2") 8 8T-8919

Washer 8 5P-8245

D5C TRACK ROLLER GUARDSFULL LENGTH


NUMBER



Pipe 10 8Y-7125

Bolt 20 8T-8917

Bolt 10 8S-3887

Bolt 8 4L-6454

Washer 8 8T-4896

Washer 30 8T-4223

Nut 10 6V-8188

Tab 8 8Y-3413

D5K XL/LGP CENTER GUIDING GUARDS


NUMBER


Bolt (12mm) 8 8T-4194

Nut 8 198-4778

311


D5K XL/LGP SystemOne CENTER GUIDING GUARDS


NUMBER


Bolt (12mm) 8 8T-4194

Nut 8 198-4778

D5G XL/LGP SystemOne CENTER GUIDING GUARDSREQUIRED WITH CENTER TREAD IDLER


NUMBER


Bolt (12mm) 8 8T-4194

Nut 8 198-4778

D5C XL/LGP SystemOne CENTER GUIDING GUARDSREQUIRED WITH CENTER TREAD IDLER


NUMBER


Bolt (1/2") 8 8T-4835

Nut 8 198-4778

312


D5K XL, LGP IDLER GUARDSCONVENTIONAL IDLER


NUMBER




Washer 8 7X-0584

Guard 2 305-1463

Plate 2 305-1464

Plate 2 305-1465


Washer 8 8T-4223

Plate 2 290-2700

Bolt (M10) 4 8T-4195

Washer 8 7X-7729

Nut (M10) 4 8T-4133




Bolt (M12) 8 8T-4184

Washer 12 8T-4223

D5K XL, LGP SystemOne IDLER GUARDSCENTER TREAD IDLER


NUMBER




Washer 8 7X-0584

Guard 2 305-1474

Plate 4 305-1475


Washer 8 8T-4223

Plate 2 290-2700

Bolt (M10) 4 8T-4195

Washer 8 7X-7729

Nut (M10) 4 8T-4133




Bolt (M12) 8 8T-4184

Washer 12 8T-4223

313


D5C STD, D5C XL UPPER FRAME ROLLER FRAME GUARDS 1


NUMBER

Roller Frame Guard (RH) 1 8Y-8920

Roller Frame Guard (LH) 1 8Y-8921


Sprocket Guard 2 8Y-8800



Lug 20 8Y-6640

Bracket 2 6S-6741

Bolt 42 5S-7379

Bolt 6 8T-8917

Washer 42 5P-1075

Washer 6 8T-4223

1 This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose ofthe guarding us to shed material and prevent its entry into the undercarriage system (link box area).

D5C LGP UPPER FRAME ROLLER FRAME GUARDS 1


NUMBER

Roller Frame Guard (RH) 1 8Y-8948

Roller Frame Guard (LH) 1 8Y-8949


Sprocket Guard 2 8Y-8800



Lug 20 8Y-6640

Bracket 2 6S-6741

Bolt 42 5S-7379

Bolt 6 8T-8917

Washer 42 5P-1075

Washer 6 8T-4223

1 This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose ofthe guarding us to shed material and prevent its entry into the undercarriage system (link box area).

314


D5G XL/LGP UPPER FRAME ROLLER FRAME GUARDS


NUMBER

Roller Frame Guard Assembly (RH) 1 174-6977

Roller Frame Guard Assembly (LH) 1 174-6978

Guard 2 176-1281

Cover Group 2 198-3378

Bolt (M10) 16 8T-4136

Bolt (10M) 16 8T-4137

Washer 32 8T-4121

D5G XL/LGP SystemOne UPPER FRAME ROLLER FRAME GUARDS


NUMBER

Roller Frame Guard Assembly (RH) 1 174-6977

Roller Frame Guard Assembly (LH) 1 174-6978

Guard 2 252-1578

Bracket Assembly 2 265-0940

Cover Group 2 198-3378

Bolt (M10) 24 8T-4136

Bolt (10M) 12 8T-4137

Washer 36 8T-4121

D5G, D5C XL/LGP SystemOne IDLER ROCK GUARDREQUIRED WITH CENTER TREAD IDLER


NUMBER



Bolt (12 mm) 16 8T-4183

Washer 16 7X-0584

D5G, D5C XL/LGP IDLER ROCK GUARDSUSE WITH CONVENTIONAL IDLER


NUMBER



Bolt (1/2 ") 16 5P-2566

Washer 16 7X-0584

315

Low Sprocket TractorsD6K, PL61

D6K XL/LGP, PL61 SystemOne TRACKPRESS FIT MASTER

FBH, DHA, WGS7.50" (190.5 mm) PITCH --18 mm BOLT

QUANTITYPART

NUMBER



Link Box Standard 1 20 311-6643



Track Hardware 2

Bolt (M18) 160 238-0472

Nut 160 238-0473

1 Link Box Standard that is greater than 40% worn should be replaced with part number 264-9766.2 Not part of link assembly; required to assemble track group.3 Clamp Master links 2 - 318-2486 and 4 - 254-0227 Master Bolts

D6K, PL61 SystemOne TRACK SHOES7.50" (190.5 mm) PITCH --18 mm BOLT


MASTER SHOE PARTNUMBER


Moderate Service (Center Hole) 20.0" (510 mm) 289-3085 289-3085


Moderate Service 24.0" (610 mm) 277-2239 -




Extreme Service 24.0" (610 mm) 277-2240 -

Extreme Service 26.0 (660 mm) 327-5831 -


Self Cleaning 30.3" (770 mm) 241-7870 -

D6K, PL61 SystemOne SPROCKETS


NUMBER


Bolt (5/8") 27 3S-8182

Nut 27 7H-3607

316


D6K, PL61 SystemOne SPROCKETED CENTER TREAD IDLERS


NUMBER

Idler Group - Sprocketed 2 239-8211

Components of Group


Bearing 2 243-5321


Toric Ring 2 148-3531


Plug 1 9W-2146

D6K, PL61 SystemOne CARRIER ROLLERS


NUMBER


D6K SystemOne TRACK ROLLERS


NUMBER


Mounting Hardware 1

Cap 2 218-4993

Bolt (16 mm) 4 137-3301

Washer 4 9X-8268


PL61 SystemOne TRACK ROLLERS


NUMBER


Mounting Hardware 1

Cap 2 218-4993

Bolt (16 mm) 4 8T-0281

Washer 4 5P-8247


317


D6K, PL61 SystemOne ENDING GUIDING GUARDS


NUMBER


Bolt (M16) 12 8T-4140

Spacer 12 204-6365

D6K, PL61 SystemOne ENDING GUIDING GUARDS (REAR SPROCKET)


NUMBER



Bolt (M16) 8 8T-4140

Spacer 8 204-6365

Bolt (M16) 4 8T-4174

Washer 4 9X-8257

Sheet Assembly (Outer RH) 1 251-8532

Sheet Assembly (Inner RH) 1 251-8531

Sheet Assembly (Outer LH) 1 271-6080

Sheet Assembly (Inner LH) 1 271-6081

Bolt (M12) (Sheet As. to Guard As.) 4 8T-4194

Washer 4 198-4778

Bolt (M12) 4 8T-4183

Washer 4 8T-4223

Bolt (M12) (Sheet As. to Sheet As.) 2 8T-5092

Washer 2 198-4778

D6K SystemOne CENTER GUIDING GUARDSLEVEL ONE GUIDING

Position guard over roller 4


NUMBER


Bolt (M16) 8 8T-4140

Spacer 8 204-6365

318


D6K SystemOne CENTER GUIDING GUARDSLEVEL TWO GUIDING

Position guard over rollers 2 & 5


NUMBER


Bolt (M16) 16 8T-4140

Spacer 16 204-0365

D6K SystemOne TRACK ROLLER GUARDS (FULL LENGTH)LEVEL THREE GUIDING


NUMBER


Bolt (M16) 20 8T-4140

Spacer 20 204-6365

Bolt (M16) 6 8T-6382

Tube 6 271-6033

Washer 12 9X-8257

Locknut 6 8T-4778

D6K, PL61 SystemOne IDLER SCRAPER GUARDS


NUMBER



Bolt (M12) 12 8T-4194

Washer 12 198-4778

319

Low Sprocket TractorsD4

D4 SEALED AND LUBRICATED TRACKCURRENT MODEL

24A, 29A, 30A, 39A, 40A, 54A, 55A, 69A, 78A, 85A, 86A, 91A, 22C, 97F, 44H, 47H, 20J, 49J, 60J, 61J, 66J, 82J,83J, 84J, 7R, 69K, 6U, 7U, 74U, 27X, 28X, 29X, 52X

6.75" (171.5 mm) PITCH -- 5/8" BOLT

PARTNUMBER

35SECTION

36SECTION

37SECTION

40SECTION

Link Assembly -- (Quantity 2) 154-3652 154-3656 -- 1 154-3657


Track Links

RH Pin End Master 1V-4603 1 1 1 1

LH Pin End Master 1V-4604 1 1 1 1

RH Bushing End Master 1V-4605 1 1 1 1

LH Bushing End Master 1V-4606 1 1 1 1

RH Regular 9K-6629 34 35 36 39

LH Regular 9K-6628 34 35 36 39

Other Components

Pin 154-3664 2 35 36 37 40

Bushing 7T-4628 35 36 37 40


Thrust Ring 1V-3361 70 72 74 80

Stopper 5G-2247 35 36 37 40

Plug 6Y-0473 35 36 37 40

Track Hardware 3

Bolt 7H-3597 136 140 144 156

Nut 1M-1408 136 140 144 156

Master Bolt 3P-2274 4 4 4 4

Special Sets/Groups



1 Order 36 section 154-3656 or 40 section 154-3657 link assembly and add or remove appropriate number of sections.2 Former Pin 9K-8550 (Use 9G-1642 Stopper)3 Not part of link assembly; required to assemble track group.

320


D4 SEALED TRACKCURRENT MODEL


6.75" (171.5mm) PITCH -- 5/8" BOLT

PARTNUMBER

35SECTION

36SECTION

37SECTION

40SECTION

Link Assembly (Quantity 2) -- 1 1V-7072 -- 2 1V-7075


Track Links

RH Pin End Master 1V-4603 1 1 1 1

LH Pin End Master 1V-4604 1 1 1 1

RH Bushing End Master 1V-4605 1 1 1 1

LH Bushing End Master 1V-4606 1 1 1 1

RH Regular 9K-6629 34 35 36 39

LH Regular 9K-6628 34 35 36 39

Other Components

Pin 9K-4060 35 36 37 40

Bushing 9K-4061 35 36 37 40

Seal 7K-2018 140 144 148 160

Track Hardware 3

Bolt 7H-3597 136 140 144 156

Nut 1M-1408 136 140 144 156


Special Sets/Groups

Pin and Bushing Group (38 Sections) 1V-8623 1 1 1 1

1 Order 36 section 1V-7072 or 40 section 1V-7075 link assembly and remove appropriate number of sections.2 Order 36 section 1V-7072 or 40 section 1V-7075 link assembly and add or remove appropriate number of sections.3 Not part of link assembly; required to assemble track group.

321


D4 SEALED TRACKONE PIECE MASTER LINK


6.75" (171.5 mm) PITCH -- 5/8" BOLT

QUANTITYPART

NUMBER



Track Links

RH Master (Full) 1 9K-0029

LH Master (Full) 1 9K-0028



Other Components

Pin 34 9K-4060

Master Pin 1 9K-4062

Bushing 34 9K-4061

Master Bushing 1 7K-2020

Seal 140 7K-2018

Spacer 2 9K-4059

Track Hardware 2

Bolt 140 7H-3597

Nut 140 1M-1408

Special Sets/Groups

Pin and Bushing Group (38 Sections) 1 1V-8623

1 If 35, 36, 37, 40 section link assemblies are required order 1V-7072 or 1V-7075 link assemblies and add or remove appropriate number ofsections.2 Not part of link assembly; required to assemble track group.

322


D4 TRACKLARGE O.D. BUSHING


6.75" (171.5 mm) PITCH -- 9/16" BOLT

QUANTITYPART

NUMBER

Link Assembly -- 36 Section 2 7K-2049 1


Track Links



Other Components

Pin 35 4B-6166


Bushing 35 7K-2019


Seal (Sealed Track) 144 7K-2018

Spacer 2 7K-2016

Track Hardware 2

Bolt 144 4K-7038

Nut 144 7K-2017

1 If 31, 32, 34, 35, 36 , 37, 40, section link assemblies are required, order 7K-2049 link assemblies and add or remove appropriate numberof sections.2 Not part of link assembly; required to assemble track group.

323


D4 TRACKSMALL O.D. BUSHING


6.75" (171.5 mm) PITCH -- 9/16" BOLT

QUANTITYPART

NUMBER



Track Links



Other Components

Pin 35 4B-6166


Bushing 35 4K-3918

Master Bushing 1 4M-0740


Spacer 2 4K-3916

Track Hardware 2

Bolt 144 4K-7038

Nut 144 7K-2017

1 If 31, 32, 34, 35, 36 , 37, 40, section link assemblies are required, upgrade to 7K-2049 or 7K-2051 link assemblies and add or removeappropriate number of sections.2 Not part of link assembly; required to assemble track group.

324


D4 TRACK24A, 29A, 30A, 39A, 40A, 54A, 55A, 69A, 78A, 85A, 86A, 91A, 22C, 97F, 44H, 47H, 20J, 49J, 60J, 61J, 66J, 82J,

83J, 84J, 7R, 69K, 6U, 7U, 74U, 27X, 28X, 29X, 52X6.75" (171.5 mm) PITCH -- 1/2" BOLT

QUANTITYPART

NUMBER



Track Links



Other Components

Pin 35 4B-6166


Bushing 35 4K-3918


Seal 144 5K-2707

Spacer 2 4K-3916

Track Hardware 2

Bolt 144 8H-7504

Nut 144 8H-5724

1 . If 31, 32, 34, 35, 36 , 37, 40, section link assemblies are required, order 4K-7128 link assemblies and add or remove appropriate numberof sections.2 Not part of link assembly; required to assemble track group.

D4 TRACK SHOES6.75" (171.5 mm) PITCH -- 5/8" BOLT



Extreme Service 20.0" (510 mm) 2V-3819 5V-2906

Extreme Service 24.0" (610 mm) 1V-7069 --






Double Grouser 14.0" (355 mm) 8E-4805 6I-8780

Double Grouser 13.0" (330 mm) 8E-4807 8E-4808



Triple Grouser 14.0" (355 mm) 9G-6396 6I-8780 1

Self Cleaning 30.0" (760 mm) 1V-5092 1V-5090

1 Double Grouser Master

325



TYPE WIDTHPART

NUMBER




Triple Grouser 13.0" (330 mm) 5K-8566


Self Cleaning 30.0" (760 mm) 1V-5091


TYPE WIDTHPART

NUMBER


Rubber 13.0" (330 mm) 5F-3926 1

1 Requires 3B-2182 Adapter.

D4 SPROCKETS67A, 78A, 85A, 86A, 88A, 22C, 44H, 69K, 7R, 18J, 20J, 49J, 58J, 69J, 60J, 61J, 65J, 82J, 83J

6.75" (171.5 mm) PITCH


NUMBER

Sprocket Assembly (29 Tooth) 1 4V-4106

Rim (Weld-On) (29 Tooth) 1 4V-4107

D4 SPROCKETS24A, 55A, 78A, 86A, 88A6.75" (171.5 mm) PITCH


NUMBER


Rim (Weld-On) (29 Tooth) 1 4V-4107

D4 SPROCKETS2T, 5T, 6U, 7U, 12A, 26A, 29A, 30A

6.75" (171.5 mm) PITCH


NUMBER

Rim (Weld-On) (27 Tooth) 1 5H-9107

326


D4 IDLERSSTRAIGHT SHAFT, 9K BLOCKS

67A, 78A, 85A, 86A, 88A, 91A, 22C, 97F, 44H, 47H, 18J, 20J, 49J, 58J, 59J, 60J, 61J, 65J, 66J, 82J, 83J, 84J,69K


NUMBER

Idler Assembly (Large O.D.) - 1 1M-8867

Idler Assembly (Small O.D.) - 1 3K-2866



Bearing 2 1 7K-1089

Shaft 1 8E-7899

Bearing Block 1 9K-8857






Bolt 24 1A-2029

Washer 24 3B-4506

Plug 1 6Y-0473

Stopper 1 7G-4332

Lock 1 5M-5000

Bolt 1 0T-0772

Washer 1 4K-9943




1 Either 2 large or small O.D. idlers required per machine.2 Component of preceding group; quantity shown is the quantity per group.

327


D4 IDLERSSTEPPED SHAFT, 4K BLOCKS

67A, 78A, 85A, 86A, 88A, 91A, 22C, 97F, 44H, 47H, 18J, 20J, 49J, 58J, 59J, 60J, 61J, 65J, 66J, 82J, 83J, 84J,69K


NUMBER

Idler Assembly (Large O.D.) - 1 1M-8867

Idler Assembly (Small O.D.) - 1 3K-2866



Bearing 2 1 7K-1089

Shaft 1 4K-9984








Bolt 24 0S-1588

Washer 24 3B-4506

Plug 1 2P-0347

Lock 1 5M-5000

Bolt 1 0T-0772

Washer 1 4K-9943




1 Either 2 large or small O.D. idlers required per machine.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

328


D4 IDLERSSTEPPED SHAFT, 1M BLOCKS

6U, 7U, 59J, 44H, 60J, 82J, 83J, 84J, 27X, 28X, 29X


NUMBER

Idler Assembly (Large O.D.) - 1 --

Idler Assembly (Small O.D.) - 1 --



Bearing 2 1 7K-1089

Shaft 1 3K-6620

Bearing Block 1 1M-8863







Bolt 24 0S-1588

Washer 24 3B-4506

Plug 1 2P-0347

Lock 1 5M-5000

Bolt 1 0T-0772

Washer 1 4K-9943





329


D4 IDLERSSTEPPED SHAFT, 2M BLOCKS

29A, 30A, 6U, 7U


NUMBER

Idler Assembly (Large O.D.) - 1 --

Idler Assembly (Small O.D.) - 1 --



Bearing 2 1 7K-1089

Shaft 1 3K-6620








Bolt 24 0S-1588

Washer 24 3B-4506

Plug 1 2P-0347





330


D4 CARRIER ROLLERS24A, 29A, 30A, 39A, 40A, 54A, 55A, 69A, 78A, 85A, 86A, 91A, 22C, 97F, 44H, 47H, 20J, 49J, 60J, 61J, 66J, 82J,

83J, 84J, 7R, 69K, 6U, 7U, 74U, 27X, 28X, 29X, 52X


NUMBER

Group 2 6K-9880

Components of Group


Shaft 1 6K-9861

Plate 1 6K-9860

Bolt 2 6V-4791

Cup 2 1M-8736

Cone 2 1M-8735

Ring 1 1M-7914

Cover 1 3K-6638


Plug 1 2P-0347

Bolt 3 0L-1351










331


D4 TRACK ROLLERS24A, 29A, 30A, 39A, 40A, 54A, 55A, 69A, 78A, 85A, 86A, 91A, 22C, 97F, 44H, 47H, 20J, 49J, 60J, 61J, 66J, 82J,

83J, 84J, 7R, 69K, 6U, 7U, 74U, 27X, 28X, 29X, 52X


NUMBER



Components of Group




Bushing Assembly (.040" Oversize) 2 7K-1089

Shaft 1 118-1610 1

End Collar 2 118-1616 2

Ring 2 6H-7382

Bolt 12 2P-3201





Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 4

Bolt 4 1A-1135

Washer 4 5P-8247




Seal -- Bushing O-Ring 2 5K-1770

Seal -- Shaft O-Ring 2 8M-5661

1 Replaces former 3K-6616 shaft; requires 2 -- 118-1616 end collars.2 If 3K-6616 shaft is used, use 2 -- 5K-7187 end collars.3 Component of preceding assembly or group; quantity shown is per assembly or group.4 These components are not included in the roller group; quantities shown are required to mount each roller.

332


D4 END GUIDING GUARDS18J, 61J, 66J, 67J, 82J, 7R, 27X, 28X, 29X, 84J850-UP


NUMBER


Guard Assembly 1 7K-2944

Wear Strip 1 5V-3875

Bolt 4 031-0221




Bolt 4 031-0221

Rear (Outer RH)



Bolt 4 031-0221

Rear (Outer LH)



Bolt 4 031-0221

D4 END GUIDING GUARDS39A, 40A, 78A, 22C, 20J, 83J, 84J1-849


NUMBER





Rear (Outer RH)


Rear (Outer LH)


333


D4 TRACK ROLLER GUARDSFULL LENGTH

39A, 40A, 78A, 22C, 20J, 82J, 83J, 84J


NUMBER

Guard Assembly

Inner RH 1 1M-7795

Inner LH 1 1M-7796

Outer RH 1 1M-7749

Outer LH 1 1M-7750

Bolt 34 0S-1594

Washer 34 3B-4510

Pipe 6 3V-7851

Nut 6 6B-6682

Washer 12 3B-4512

D4 TRACK ROLLER GUARDSPARTIAL

18J, 61J, 66J, 67J, 7R


NUMBER

Guard Assembly

Inner RH 1 1V-4268

Inner LH 1 1V-4266

Outer RH 1 1V-4269

Outer LH 1 1V-4267

Bolt 10 5K-7144

Nut 10 7B-1756

Spacer 10 5K-7247

Bolt 24 5K-7138

Retainer 6 4K-7348

Bolt 12 5K-7143

Washer 12 4B-4280

334


D4 TRACK ROLLER GUARDSPARTIAL

39A, 40A, 78A, 22C, 20J, 82J, 83J, 84J


NUMBER

Guard Assembly

Inner RH 1 5K-7315

Inner LH 1 5K-7316

Outer RH 1 5K-7305

Outer LH 1 5K-7306

Bolt 10 5K-7144

Nut 10 7B-1756

Spacer 10 5K-7247

Bolt 20 5K-7138

Retainer 6 4K-7348

Bolt 12 5K-7143

Washer 12 4B-4280

D4 CENTER GUIDING GUARDS


NUMBER



Bolt 4 6K-0137

Lock Washer 4 4D-3704

Bolt 8 031-0221

Spacer 4 9M-7783

335

Low Sprocket TractorsD5, 561

D5 SEALED AND LUBRICATED TRACKSPLIT MASTER LINKS, CURRENT MODEL

51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X, 23X, 24X, 25X,26X, 43X, 44X, 45X, 46X, 47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 12R, 6R, 68J

6.91" (175.5 mm) PITCH -- 5/8" BOLT

PARTNUMBER

38Section

39Section

43Section

46Section

Link Assembly -- (2 Quantity) -- 1 154-3672 -- 1 154-3676


Track Links

RH Pin End Master 3P-3043 1 1 1 1

LH Pin End Master 3P-3044 1 1 1 1

RH Bushing End Master 3P-3045 1 1 1 1

LH Bushing End Master 3P-3046 1 1 1 1

RH Regular 3P-7153 37 38 42 45

LH Regular 3P-7154 37 38 42 45

Other Components

Pin 160-7818 2 38 39 43 46

Bushing 7T-4636 38 39 43 46


Thrust Ring 3P-3878 76 78 86 92

Stopper 5G-2247 38 39 43 46

Plug 6Y-0473 38 39 43 46

Track Hardware 3

Bolt 7H-3597 148 152 168 180

Nut 1M-1408 148 152 168 180


Special Sets/Groups



1 Order 154-3672 or 154-3676 link assemblies and add or remove appropriate number of sections.2 Former pin 3P-3880 (Use 9G-1642 stopper).3 Not part of link assembly; required to assemble track group.

336


D5 SEALED TRACKSPLIT MASTER LINKS, CURRENT MODEL


6.91" (175.5 mm) PITCH -- 5/8" BOLT

PARTNUMBER

38Section

39Section

43Section

46Section

Link Assembly -- (2 Quantity) -- 1 3P-5757 -- 1 3P-5762


Track Links

RH Pin End Master 3P-3043 1 1 1 1

LH Pin End Master 3P-3044 1 1 1 1

RH Bushing End Master 3P-3045 1 1 1 1

LH Bushing End Master 3P-3046 1 1 1 1

RH Regular 3P-7153 37 38 42 45

LH Regular 3P-7154 37 38 42 45

Other Components

Pin 6B-5502 38 39 43 46

Bushing 5S-0710 38 39 43 46

Seal 5S-0709 152 156 172 184

Track Hardware 2

Bolt 7H-3597 148 152 168 180

Nut 1M-1408 148 152 168 180


Special Sets/Groups

Pin and Bushing Group (38 Sections) 6P-4234 1 1 1 1

1 Order 3P-5757 or 3P-5762 link assemblies and add or remove appropriate number of sections.2 Not part of link assembly; required to assemble track group.

337


D5 SEALED TRACKSEALED ONE PIECE MASTER LINKS, FORMER MODEL


6.91" (175.5 mm) PITCH -- 5/8" BOLT

QUANTITYPART

NUMBER

Link Assembly -- 46 Section -- -- 1


Track Links

RH Master (Full) 1 3P-7155

LH Master (Full) 1 3P-7156

RH Regular 45 3P-7153

LH Regular 45 3P-7154

Other Components

Pin 45 6B-5502

Master Pin 1 8M-7456

Bushing 45 5S-0710


Seal 184 5S-0709

Spacer 2 5S-0754

Track Hardware 2

Bolt 184 7H-3597

Nut 184 1M-1408

Special Sets/Groups

Pin and Bushing Group (38 Sections) 1 6P-4234

1 If 38, 39, 43, 46, section link assemblies are required, upgrade to 3P-5757 or 3P-5762 and add or remove appropriate number of sections.


338


D5 EXTENDED WEAR LIFE TRACK 1


6.91" (175.5 mm) PITCH -- 5/8" BOLT

QUANTITYPART

NUMBER



Track Links

RH Pin End Master 1 7T-4541

LH Pin End Master 1 7T-4542

RH Bushing End Master 1 7T-4543

LH Bushing End Master 1 7T-4544



Other Components

Pin 39 160-7818 3

Bushing 39 7T-4636


Thrust Ring 78 3P-3878

Stopper 39 5G-2247

Plug 39 6Y-0473

Track Hardware 4

Bolt 152 7H-3597

Nut 152 1M-1408


Special Sets/Groups



1 Note: Extended Wear Life Link Assemblies require special rollers and idlers to match the high rail link; refer to roller and idler section fordetails.2 If 38, 43, 46, section link assemblies are required order 154-3662 and add or subract appropriate number of sections.3 Former pin 3P-3880 (Use 9G-1642 stopper).4 Not part of link assembly; required to assemble track group.

339


561 SEALED TRACKSPLIT MASTER LINK, CURRENT MODEL

85H, 92J, 54X6.91" (175.5 mm) PITCH -- 5/8" BOLT

QUANTITYPART

NUMBER

Link Assembly -- 39 Section 2 3P-5757


Track Links

RH Pin End Master 1 3P-3043

LH Pin End Master 1 3P-3044

RH Bushing End Master 1 3P-3045

LH Bushing End Master 1 3P-3046



Other Components

Pin 39 6B-5502

Bushing 39 5S-0710

Seal (Spring Washer) 156 5S-0709

Track Hardware 1

Bolt 152 7H-3597

Nut 152 1M-1408


Special Sets/Groups



340


561 SEALED TRACKONE PIECE MASTER LINKS, FORMER MODEL

85H, 92J, 54X6.91" (175.5 mm) PITCH -- 5/8" BOLT

QUANTITYPART

NUMBER



Track Links





Other Components

Pin 38 6B-5502


Bushing 38 5S-0710



Spacer 2 5S-0754

Track Hardware 2

Bolt 156 7H-3597

Nut 156 1M-1408

Special Sets/Groups


1 Upgrade to 3P-5757 link assembly.2 Not part of link assembly; required to assemble track group.

341


561 SEALED TRACK62A

6.75" (171.5 mm) PITCH - 5/8" BOLT

QUANTITYPART

NUMBER

Link Assembly -- 40 Section 2 2S-7579


Track Links



Other Components

Pin 39 6B-5502


Bushing 39 8M-7457

Master Bushing 1 2A-3241

Seal (Spring Washer) 160 8M-7454

Spacer 2 8M-7455

Track Hardware 1

Bolt 160 7H-3597

Nut 160 1M-1408


342


D5, 561 TRACK SHOES6.91" (175.5 mm) PITCH -- 5/8" BOLT



Moderate Service 15.0" (380 mm) 9K-3028 4V-7410

Moderate Service 16.0" (405 mm) 5S-0820 3P-3888











Double Grouser 22.0" (560 mm) 8E-4729 3P-3891 1

Triple Grouser 2 13.7" (348 mm) 9G-6389 8E-4728 3

Triple Grouser 15.0" (380 mm) 3T-3690 8E-4725 3

Triple Grouser 2 15.0" (380 mm) 6K-1910 8E-4725 3

Triple Grouser 2 18.0" (460 mm) 8S-2981 8E-4723 4

Self Cleaning 34.0" (865 mm) 3P-3898 3P-3897

1 Moderate Service Shoe2 Center Punched.3 Double Grouser Master (Non Center Punched).4 19.7" (500 mm) Double Grouser Shoe (Trim 1"off each end), (Center Punched).

D5, 561 SPROCKETS51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X, 23X, 24X, 25X,

26X, 43X, 44X, 45X, 46X, 47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 12R, 6R, 68J, 85H, 92J


NUMBER

Sprocket Hub 1 5S-0726 1



Mud/Snow Segment 9 8P-9453

Adapter Ring 1 5S-0834

Rim 1 5S-4822

Bolt 27 3S-8182

Nut 27 7H-3607

1 Optional Classic service replacement 227-4769.

343


561 SPROCKET62A

6.75" (171.5 mm) - PITCH


NUMBER

Sprocket Assembly ( 28 Tooth) 1 8M-6041

Rim ( 28 Tooth) 1 3H-2643

D5, 561 IDLERSLARGE O.D.

51H, 52H, 81H, 82H, 83H, 84H, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 22X, 23X, 24X, 25X, 43X, 44X,45X, 46X, 47X, 48X, 49X, 54X, 9RG, 8MB, 12R, 6R, 68J, 62A, 85H, 92J


NUMBER

Idler Assembly 2 8S-2560

Extended Wear Idler Assembly 1 2 7T-3501

Other Components

Bushing Assembly 2 3P-8272

Bearing 2 1 8P-6652

Shaft 1 5K-0305

Bearing Block 1 9G-8300







Bolt 12 0S-1588

Washer 12 3B-4506

Plug 1 2P-0347




Seal -- Bushing O-Ring 2 2S-2182


1 For use with Extended Wear Life Track2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

344


D5 IDLERSSMALL O.D.

21J, 98J, 26X, 21Y


NUMBER

Idler Assembly 2 1M-3121

Other Components


Bearing 1 1 8P-6652

Shaft 1 5K-0305

Bearing Block 1 3T-4427

Bearing Block 1 3T-4428






Bolt 12 0S-1588

Washer 12 3B-4506

Plug 1 2P-0347







345


D5, 561 IDLERSEARLY MODELS

21J, 62J, 63J, 93J, 94J, 95J, 96J, 98J, 51H, 52H, 81H, 82H, 83H, 84H, 37J, 54J, 67J, 97J, 12R, 6R, 68J, 62A, 85H,92J


NUMBER

Idler Assembly

Large Diameter 2 8S-2560

Small Diameter 2 1M-3121

Other Components


Bearing 1 1 8P-6652

Shaft 1 5M-1913 2

Bearing 2 1P-1578






Bolt 12 0S-1588

Washer 12 3B-4506

Plug 1 2P-0347






1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 1P-1555 Shaft used on D5 idler with 1P1554 and 1P1582 bearing blocks.

346


D5, 561 CARRIER ROLLERS51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X, 23X, 24X, 25X,

26X, 43X, 44X, 45X, 46X, , 47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 12R, 6R, 68J, 62A, 85H, 92J

(PER MACHINE) QUANTITYFORMER PART

NUMBER PART NUMBER

Group 4 -- 1 5A-8374

Components of Group

Roller Shell 1 2S-0205 5A-8375

Shaft 1 5M-1914 3T-3207

Cup 2 1M-7911 9S-3581

Cone 2 1M-7912 9S-3582

Ring 1 1M-7914 1M-7914

Cover 1 5M-2043 5M-2043

Collar 1 1M-7918 9S-3567

Support 1 1M-7915 --

Plug 1 2P-0347 2P-0347

Bolt 3 0S-1594 0S-1594

Ring 1 1M-7916 --

Nut 1 1M-7913 --

Plate 1 -- 8P-6188

Bolt 2 -- 5K-9107

Seal -- Duo-Cone Group 1 9W-5224 6Y-0925

Toric Ring 2 2 1M-3097 8H-2262

Seal -- Cover 1 2H-6338 2H-6338

Seal -- Support 1 4H-9105 --

Seal -- Plug 1 1S-8947 1S-8947

Seal -- Shaft O-Ring 1 1H-9696 1H-9696


Seal -- Duo-Cone Group (Steel Mill) 2 5K-6191 4S-8984

Toric Ring 2 2 2S-2181 9M-9730

1 Upgrade to 5A-8374 group.2 Component of preceding group; quantity shown is the quantity per group.

347


D5, 561 TRACK ROLLERS51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X, 23X, 24X, 25X,

26X, 43X, 44X, 45X, 46X, 47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 12R, 6R, 68J, 85H, 92J, 62A


NUMBER



Components of Group

Roller Shell (DF) 1 9S-9534 2

Roller Shell (SF) 1 9S-9535 3

Extended Wear Life Shell (DF) 4 1 9W-8350

Extended Wear Life Shell (SF) 4 1 9W-8353


Bearing 5 1 8P-6652

Shaft 1 118-1613 6

End Collar 2 5M-0627 7

Ring 2 6H-7382

Bolt 12 2P-3201





Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 8

Bolt 4 8S-9092 9

Washer 4 5P-8247






1 8 Double Flange Rollers required on LGP machines.2 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.3 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.4 For use with Extended Wear Life Track5 Component of preceding assembly or group; quantity shown is per assembly or group.6 Replaces former 5M-1915 shaft; requires 2 -- 5M-0627 end collars.7 If 5M-1915 shaft is used, use 1 -- 5M-0627 and 1 -- 1M-3812 end collar.8 These components are not included in the roller group; quantities shown are required to mount each roller.9 Use 0S-1601 Bolt for serial numbers 95J1-472, 96J1-6031, 93J, 94J

348


D5, 561 END GUIDING GUARDS92J, 93J , 94J, 95J, 96J 97J, 98J, 12R, 6R, 68J, 23X 24X, 25X, 26X, 43X, 44X, 45X, 46X, 47X, 48X, 49X, 54X,

62J, 63J, 67J, 8MB, 21Y


NUMBER


Guard Assembly 1 9S-8359 1

Wear Strip 1 9S-8354 2

Bolt 4 7B-3235

Lock Washer 4 3B-4508




Bolt 4 7B-3235


Rear (Outer RH)



Bolt 4 7B-3235


Rear (Outer LH)



Bolt 4 7B-3235


1 Optional Classic service replacement 226-4857.2 Optional Classic service replacement 226-4855.3 Optional Classic service replacement 226-4856.4 Optional Classic service replacement 226-4854.5 Optional Classic service replacement 226-0239.6 Optional Classic service replacement 226-0243.7 Optional Classic service replacement 226-0238.8 Optional Classic service replacement 226-0244.

D5, 561 END GUIDING GUARDS6R, 12R, 68J


NUMBER





349



81H, 82H, 83H, 84H, 37J, 21J, 93J, 51H, 52H,


NUMBER

Guard Assembly

Inner RH 1 7B-7889

Inner LH 1 7B-7890

Outer RH 1 7B-7891

Outer LH 1 7B-7892

Bolt 34 1A-8537

Washer 34 4D-3704

Spacer 34 3P-4134

D5, 561 TRACK ROLLER GUARDSPARTIAL

81H, 82H, 83H, 84H, 85H, 12R, 6R, 68J, 92J, 93J, 94J, 95J, 96J, 97J, 6X, 49X286-UP, 62J, 63J, 67J, 22X, 23X,24X, 25X, 43X, 44X, 47X, 48X, 62A, 8MB, 54X, 51H, 52H


NUMBER

Guard Assembly

Inner RH 1 5M-0633

Inner LH 1 5M-0634

Outer RH 1 5M-0635

Outer LH 1 5M-0636

Bolt 32 1B-4367

Washer 32 4D-3704

Spacer 32 3P-4134

Bolt 2 1A-1135


Tube 6 2F-0023

Rod Assembly 6 --

Nut 6 1B-4206


350


D5 CENTER GUIDING GUARDS12R, 6R, 68J, 46X


NUMBER



Bolt 8 6H-1717


Bolt 4 1D-4585

Washer 4 4D-3704

1 Optional Classic service replacement 226-4938.

D5, 561 FINAL DRIVE GUARDS51H, 52H, 81H, 82H, 83H, 84H, 85H, 62J, 63J, 67J, 92J, 93J, 94J, 95J, 96J, 23X, 25X, 43X, 44X, 45X, 47X, 49X,

54X


NUMBER

Guard (RH) 1 7S-8214 1

Guard (LH) 1 7S-8213 2

Bolts 8 0V-0375

Washer 8 2M-0849

1 Optional Classic service replacement 226-4944.2 Optional Classic service replacement 226-4943.

351


D6 SEALED AND LUBRICATED TRACKHYBRID, SPLIT MASTER LINKS

10K, 26K, 23U, 24U, 74W, 75W, 1Y, 3X, 4X, 5X, 6X, 19X, 20X, 69U, 41A, 71A, 73A, 74A, 76A, 82A, 83A, 96A,46J, 47J, 55J, 69J, 99J, 2MJ, 8FJ

8.00" (203.2 mm) PITCH -- 3/4" BOLT

PARTNUMBER

36SECTION

39SECTION

41SECTION

Link Assembly (Quantity 2) 236-9861 236-9864 236-9866


Track Links





RH Regular 228-2735 35 38 40

LH Regular 228-2736 35 38 41

Other Components

Pin 160-7819 1 36 39 41

Bushing 230-4512 36 39 41


Thrust Ring 152-8071 72 78 82

Stopper 5G-2247 36 39 41

Plug 6Y-0473 36 39 41

Track Hardware 2

Bolt 1S-1859 140 152 160

Nut 1S-1860 140 152 160

Master Bolt 9S-1838 4 4 4

Special Sets/Groups



1 Former pin 3P1108 (Use 9G1642 Stopper).2 Not part of link assembly; required to assemble track group.

352


D6 SEALED AND LUBRICATED TRACKFORMER SEALED AND LUBRICATED TRACK, SPLIT MASTER LINKS

10K, 26K, 23U, 24U, 74W, 75W, 1Y, 3X, 4X, 5X, 6X, 19X, 20X, 69U, 41A, 71A, 73A, 74A, 76A, 82A, 83A, 96A,46J, 47J, 55J, 69J, 99J, 2MJ, 8FJ, BWJ, C6G, 3SR

8.00" (203.2 mm) PITCH -- 3/4" BOLT

PARTNUMBER

36SECTION

39SECTION

41SECTION



Track Links



RH Bushing End Master 6Y-6745 1 1 1

LH Bushing End Master 6Y-6746 1 1 1

RH Regular 3P-1112 35 38 40

LH Regular 3P-1113 35 38 41

Other Components

Pin 160-7819 4 36 39 41

Bushing 8E-5257 5 36 39 41


Thrust Ring 3P-1104 72 78 82

Stopper 5G-2247 36 39 41

Plug 6Y-0473 36 39 41

Track Hardware 6

Bolt 1S-1859 140 152 160

Nut 1S-1860 140 152 160


Special Sets/Groups

Bushing and Seal Group (36 Sections) 6I-8061 1 1 1


1 Service replaced by 236-9861 hybrid link assembly.2 Service replaced by 236-9864 hybrid link assembly.3 Service replaced by 236-9866 hybrid link assembly.4 Former pin 3P1108 (Use 9G1642 Stopper).5 If small O.D. bushing is required, use 3P-1109.6 Not part of link assembly; required to assemble track group.

353


D6 SEALED TRACKHYBRID SPLIT MASTER LINKS


8.00" (203.2 mm) PITCH -- 3/4" BOLT

PARTNUMBER

36SECTION

41SECTION



Track Links





RH Regular 228-2735 35 40

LH Regular 228-2736 35 40

Other Components

Pin 4M-5989 36 41

Bushing 237-7305 36 41

Seal 8M-7231 144 164

Track Hardware 1

Bolt 1S-1859 140 160

Nut 1S-1860 140 160



354


D6 SEALED TRACKFORMER SEALED TRACK, SPLIT MASTER LINKS


8.00" (203.2 mm) PITCH -- 3/4" BOLT

PARTNUMBER

36SECTION

41SECTION

Link Assembly (Quantity 2) 3P-1088 1 3P-5927 2


Track Links

RH Pin End Master 6Y-6743 1 1

LH Pin End Master 6Y-6744 1 1

RH Bushing End Master 6Y-6745 1 1

LH Bushing End Master 6Y-6746 1 1

RH Regular 3P-1112 35 40

LH Regular 3P-1113 35 40

Other Components

Pin 4M-5989 36 41

Bushing 4M-5991 36 41

Seal 8M-7231 144 164

Track Hardware 3

Bolt 1S-1859 140 160

Nut 1S-1860 140 160


Special Sets/Groups

Pin and Bushing Group (36 Sections) 6P-4235 1 1

1 Service replaced by 238-9951 hybrid link assembly.2 Service replaced by 238-9954 hybrid link assembly.3 Not part of link assembly; required to assemble track group.

355


D6 SEALED TRACKHYBRID, ONE PIECE MASTER LINKS


8.00" (203.2 mm) PITCH -- 3/4" BOLT

QUANTITYPART

NUMBER



Track Links

RH Master 1 240-2503

LH Master 1 240-2504



Other Components

Pin 35 4M-5989

Master Pin 1 8E-0855

Bushing 35 237-7305

Master Bushing 1 237-7306


Spacer 2 8M-7290

Track Hardware 1

Bolt 144 1S-1859

Nut 144 1S-1860


356


D6 SEALED TRACKFORMER, ONE PIECE MASTER LINKS


8.00" (203.2 mm) PITCH -- 3/4" BOLT

QUANTITYFORMER

PART NUMBER



Track Links



Other Components

Pin 35 4M-5989


Bushing 35 4M-5991


Seal 144 8M-7231

Spacer 2 8M-7290

Track Hardware 2

Bolt 144 1S-1859

Nut 144 1S-1860

Special Sets/Groups


1 For 36, 39, or 41 section link assemblies, upgrade to 238-9951 (36 Section) or 238-9954 (41 Section) hybrid link assembly and add orremove appropriate number of sections.2 Not part of link assembly; required to assemble track group.

357




8.00" (203.2 mm) PITCH -- 3/4" BOLT

QUANTITYPART

NUMBER



Track Links



RH Bushing End Master 1 6Y-6749

LH Bushing End Master 1 6Y-6750



Other Components

Pin 36 160-7819 3

Bushing 36 8E-5257 4



Stopper 36 5G-2247

Plug 36 6Y-0473

Track Hardware 5

Bolt 140 1S-1859

Nut 140 1S-1860


Special Sets/Groups

Bushing and Seal Group (36 Sections) 1 6I-8061


1 Note: Extended Wear Link Assemblies require special rollers and idlers to match the high rail link; refer to roller and idler sections fordetails.2 Service replaced by 236-9861 hybrid link assembly. If 39, 41, section link assemblies are required refer to (D6 Sealed and LubricatedTrack, hybrid split master links) table.3 Former pin 3P-1108 (Use 9G-1642 Stopper)4 If small O.D. bushing is required, use 3P-1109.5 Not part of link assembly; required to assemble track group.

358


D6D HEAVY DUTY TRACK 1

36, 39, 41 SECTION8.00" (203.2 mm) PITCH -- 3/4" BOLT

PARTNUMBER

36SECTION

39SECTION

41SECTION

Link Assembly -- (Quantity 2) 142-1365 2 6I-9668 6I-9671


Track Links

RH Pin End Master 8E-7407 1 1 1

LH Pin End Master 8E-7408 1 1 1

RH Bushing End Master 8E-7409 1 1 1

LH Bushing End Master 8E-7410 1 1 1

RH Regular 8E-7405 35 38 40

LH Regular 8E-7406 35 38 40

Other Components

Pin 160-7820 3 36 39 41

Bushing 8E-7222 36 39 41


Thrust Ring 152-8071 72 78 82

Stopper 5G-2247 36 39 41

Plug 6Y-0473 36 39 41

Track Hardware 4

Bolt 6V-1792 140 152 160

Nut 1S-1860 140 152 160


Special Sets/Groups



1 When installing Heavy Duty Track on D6 machines, refer to IRM UC97-6 for installation and guarding information. The following arerequired:New D6R/H Track Shoe.New D6D Extended Wear life Idlers (7T-4562).New D6D Extended Wear life Rollers or new D6R/H Roller Groups.Track guides and guards reworked.Recoil rod shortened.2 Use 6I-9668 link assembly and remove three (3) sections.3 Former pin 8E-7220 (Use 9G-1642 stopper).4 Not part of the link assembly; required to assemble track group.

359


D6 TRACKSPLIT MASTER LINKS (REPLACEMENT TRACK FOR CURRENT 6.75") 1

37A, 44A, 8U, 9U6.91" (175.5 mm) PITCH -- 5/8" BOLT

QUANTITYSEALED PART

NUMBERSALT PARTNUMBER

Link Assembly -- 38 Section 2 -- 2 -- 3


Track Links

RH Pin End Master 1 3P-3043 3P-3043

LH Pin End Master 1 3P-3044 3P-3044

RH Bushing End Master 1 3P-3045 3P-3045

LH Bushing End Master 1 3P-3046 3P-3046

RH Regular 37 3P-7153 3P-7153

LH Regular 37 3P-7154 3P-7154

Other Components

Pin 38 6B-5502 160-7818 4

Bushing 38 5S-0710 7T-4636

Seal 152 5S-0709 --

Seal Assembly (Rigid) 76 -- 250-3990

Thrust Ring 76 -- 3P-3878

Stopper 38 -- 5G-2247

Plug 38 -- 6Y-0473

Track Hardware 5

Bolt 148 7H-3597 7H-3597

Nut 148 1M-1408 1M-1408

Master Bolt 4 3P-2274 3P-2274

Special Sets/Groups

Bushing and Seal Group (46 Sections) 1 -- 154-3659

Pin and Bushing Group (38 Sections) 1 6P-4234 --


1 Reuse of 6.75" pitch track shoes with 6.91" pitch track is acceptable in conditions where shoe leading and trailing edge gap is notcrictical. Shoe bolt pattern is common between 6.75" and 6.91" pitch track.2 Order 3P-5757 link assembly and remove one section.3 Order 154-3672 link assembly and remove one section.4 Former pin 3P-3880 (Use 9G-1642 Stopper)5 Not part of the link assembly; required to assemble track group.

360


D6 TRACKSPLIT MASTER LINKS (REPLACEMENT TRACK FOR CURRENT 6.75") 1


QUANTITYSEALED PART

NUMBERSALT PARTNUMBER

Link Assembly -- 39 Section 2 3P-5757 154-3672


Track Links

RH Pin End Master 1 3P-3043 3P-3043

LH Pin End Master 1 3P-3044 3P-3044

RH Bushing End Master 1 3P-3045 3P-3045

LH Bushing End Master 1 3P-3046 3P-3046

RH Regular 38 3P-7153 3P-7153

LH Regular 38 3P-7154 3P-7154

Other Components

Pin 39 6B-5502 160-7818 2

Bushing 39 5S-0710 7T-4636

Seal 156 5S-0709 --

Seal Assembly (Rigid) 78 - 250-3990

Thrust Ring 78 -- 3P-3878

Stopper 78 - 5G-2247

Plug 39 - 6Y-0473

Track Hardware 3

Bolt 152 7H-3597 7H-3597

Nut 152 1M-1408 1M-1408

Master Bolt 4 3P-2274 3P-2274

Special Sets/Groups

Bushing and Seal Group (46 Sections) 1 - 154-3659

Pin and Bushing Group (38 Sections) 1 6P-4234 --

Seal Set (92 Seal Assemblies) 1 - 252-7859

1 Reuse of 6.75" pitch track shoes with 6.91" pitch track is acceptable in conditions where shoe leading and trailing edge gap is notcrictical. Shoe bolt pattern is common between 6.75" and 6.91" pitch track.2 Former pin 3P-3880 (Use 9G-1642 Stopper)3 Not part of the link assembly; required to assemble track group.

361


D6 TRACKSEALED ONE PIECE MASTER LINKS (REPLACEMENT TRACK FOR FORMER 6.75") 1


FORMERPART

NUMBER38

SECTION39

SECTION

Link Assembly -- (Quantity 2) -- 2 -- 3


Track Links

RH Master (Full) 3P-7155 1 1

LH Master (Full) 3P-7156 1 1



Other Components

Pin 6B-5502 37 38

Master Pin 8M-7456 1 1

Bushing 5S-0710 37 38

Master Bushing 5S-0753 1 1

Seal 5S-0709 152 156

Spacer 5S-0754 2 2

Track Hardware 4

Bolt 7H-3597 152 156

Nut 1M-1408 152 156

Special Sets/Groups


1 Reuse of 6.75" pitch track shoes with 6.91" pitch track is acceptable in conditions where shoe leading and trailing edge gap is notcritical. Shoe bolt pattern is common between 6.75" and 6.91"pitch tracks.2 Serviced as individual components; upgrade to 3P-5757 (Sealed) or 154-3672 (S&L) and remove one section.3 Serviced as individual components; upgrade to 3P-5757 (Sealed) or 154-3672 (S&L) link assembly.4 Not part of the link assembly; required to assemble track group.

362


D6 TRACK SEALEDONE PIECE MASTER LINKS

37A, 44A6.75" (171.5 mm) 5/8" BOLT

QUANTITYPART

NUMBER

Link Assembly -- 40 Section 2 2S-7579


Track Links



Other Components

Pin 39 6B-5502


Bushing 39 8M-7457

Master Bushing 1 2A-3241


Spacer 2 8M-7455

Track Hardware 1

Bolt 160 7H-3597

Nut 160 1M-1408


363






Extreme Service (Trapezoidal Opening) 18.0" (460 mm) 1Q-4985 1Q-4984




Extreme Service (Trapezoidal Opening) 24.0" (610 mm) 3Q-5391 1 157-1374


Extreme Service 36.0" (915 mm) 6Y-6401 169-5867

Moderate Service 18.0" (460 mm) 6Y-6289 6Y-6290

Moderate Service (Trapezoidal Opening) 18.0" (460 mm) 1Q-4921 1Q-4922











Triple Grouser 17.0" (430 mm) 2V-5114 8E-4502 2

Self Cleaning 36.0" (915 mm) 3P-1134 3P-1133

1 Clipped Grouser2 Double Grouser Master










Triple Grouser 1 15.0" (380 mm) 6K-1910 8E-4725 2


Triple Grouser 18.0" (460 mm) 8S-2981 --

1 Slotted Holes2 Double Grouser Master (Not Center Punched).

364


D6 SPROCKETS74A, 76A, 82A, 83A, 71A, 73A, 41A, 23U, 24U, 69U, 46J, 47J, 55J, 69J, 49W, 74W, 75W, 8FJ, 2MJ, 10K, 17R,

3X, 4X, 5X, 6X, 19X, 20X8.00" (203.2 mm) PITCH


NUMBER

Sprocket Hub 1 8P-1851


Mud/Snow Segment (5 Tooth) 5 8P-9454


Rim 1 9M-3818 1

Bolt 20 3S-8182

Nut 20 7H-3607

1 Service replaced with Classic 289-2207. Refer to Special Instructions SEHS7750 and SEHS7274 for more information.

D6 SPROCKET3/4" MOUNTING BOLTS

6HC


NUMBER


Bolt 20 117-1617

Nut 20 7H-3608

D6 SPROCKETSEARLY MACHINE37A, 44A, 8U, 9U

6.91" (175.5 mm) PITCH


NUMBER





Bolt 27 3S-8182

Nut 27 7H-3607

1 Service replaced by Classic 227-4769.

365


D6 IDLERSCURRENT

41A, 71A, 73A, 76A, 82A, 83A, 23U, 24U, 3X, 4X, 5X, 6X, 1Y, 19X, 20X, 46J, 47J, 55J, 69J, 99J, 69U, 49W, 2MJ,8FJ, 10K


NUMBER



Other Components


Bearing 2 1 8P-5197

Shaft 1 5M-5005








Bolt 12 0S-1588

Washer 12 3B-4506

Plug 1 2P-0347




Seal -- Bushing O-Ring (Steel Mill) 2 2S-2182

Seal -- Shaft O-Ring (Steel Mill) 2 8M-4436

1 For use with Extended Wear Life Track.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

366


D6 IDLERSLARGE O.D., FORMER

8U10971-UP, 9U29219-UP


PART NUMBER


Other Components


Bearing 1 1 8P-6652

Shaft 1 5M-1913





Bolt 12 0S-1587

Washer 12 3B-4508

Plug 1 2B-7408


Seal-- Duo- Cone Group 2 5K-6191


Seal-- Bushing O-Ring 2 2S-2182

Seal-- Shaft O-Ring 2 8M-5661


367


D6 IDLERSSMALL O.D., FORMER8U1-10970, 9U1-29218


PART NUMBER


Other Components


Bearing 1 1 8P-6652

Shaft 1 5M-1913





Bolt 12 0S-1587

Washer 12 3B-4508

Plug 1 2B-7408







368


D6 CARRIER ROLLERS41A, 71A, 73A, 74A, 76A, 82A, 83A, 23U, 24U, 3X, 4X, 5X, 6X, 19X, 20X, 46J, 47J, 55J, 69J, 99J, 69U, 49W,

2MJ, 8FJ, 10K, 1Y


NUMBER PART NUMBER

Group 4 -- 1 3T-3206

Components of Group

Roller Shell 1 -- 1 9S-8320

Shaft 1 1S-4467 3T-3207

Cup 2 1M-7911 9S-3581

Cone 2 1M-7912 9S-3582

Ring 1 5H-0034 1M-7914

Cover 1 5M-2043 5M-2043

Collar 1 1S-4468 9S-3567


Plug 1 2P-0347 2P-0347

Bolt 3 0S-1594 0S-1594

Bolt 2 -- 5K-9107

Plate 1 -- 8P-6188

Nut 1 1M-7916 --

Ring 1 1M-7913 --


Toric Ring 2 2 1M-3097 8H-2262

Seal -- Cover 1 2H-6338 2H-6338


Seal -- Plug 1 1S-8947 1S-8947

Seal -- Shaft O-Ring 1 7F-8267 1H-9696



Toric Ring 2 2 2S-2181 9M-9730

1 Upgrade to 3T-3206 group.2 Component of preceding group; quantity shown is the quantity per group.

369


D6 CARRIER ROLLERSEARLY MODEL

37A, 44A, 8U, 9U


NUMBER

Group 4 5A-8374

Components of Group


Shaft 1 3T-3207

Cup 2 9S-3581

Cone 2 9S-3582

Ring 1 1M-7914

Cover 1 5M-2043

Collar 1 9S-3567

Plug 1 2P-0347

Bolt 3 0S-1594

Bolt 2 5K-9107

Plate 1 8P-6188

Nut 1 1M-7916

Ring 1 1M-7913










370


D6 STANDARDIZED TRACK ROLLERSCURRENT 3/4" MOUNTING HARDWARE

4X4775-UP, 74W, 75W, 3X819-UP, 5X, 6X819-UP, 19X, 20X, 1Y, 2MJ, 8FJ, 5X780-UP, 69U


NUMBER







Mounting Hardware 2

Cap 2 317-9079

Bolt (3/4") 4 1D-4610

Washer 4 5P-8248

1 8 required for LGP machines.2 These components are not included in the roller group; quantities shown are required to mount each roller.

D6 STANDARDIZED TRACK ROLLERSFORMER 5/8" MOUNTING HARDWARE

4X1-4774, 41A, 71A, 73A, 74A, 76A, 82S, 83A, 23U, 90B, 46J, 47J, 55J, 69J, 99J, 10K, 17R, 24U, 49W, 5X1-779


NUMBER







Mounting Hardware 2

Cap 2 317-9078

Bolt (5/8") 4 1D-4585

Washer 4 2S-0736

1 8 required for LGP machines.2 These components are not included in the roller group; quantities shown are required to mount each roller.

371


D6 TRACK ROLLERS3/4" MOUNTING HARDWARE

4X4775-UP, 74W, 75W, 3X819-UP, 5X, 6X819-UP, 19X, 20X, 1Y, 2MJ, 8FJ, 5X780-UP, 69U


NUMBER



Extended Wear Life (DF) 4 6 1 118-1635 2

Extended Wear Life (SF) 4 6 118-1634 3

Components of Group

Roller Shell (DF) 1 9G-8032 2

Roller Shell (SF) 1 9G-8027 3

Extended Wear Life Shell (DF) 4 1 9W-5411 2

Extended Wear Life Shell (SF) 4 1 9W-5408 3


Bearing 5 1 8P-5197

Shaft 1 116-6702 6

End Collar 2 7G-0418 7

Ring 2 5M-4443

Bolt 12 2P-3201





Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 8

Bolt 4 1D-4608

Washer 4 5H-1504






1 8 required on LGP machines.2 Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.3 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.4 For use with Extended Wear Life Track.5 Component of preceding assembly or group; quantity shown is per assembly or group.6 Replaces former 7G-0419 shaft, requires 2, 7G-0418 end collars. Serviced Replaced By: 1 - Roller Group (DF) 288-0935, or 1 - RollerGroup (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.7 If 7G-0419 shaft is used, use 1 - 7G-4018 and 1 - 7G-0417 end collar.8 These components are not included in the roller group; quantities shown are required to mount each roller.

372


D6 TRACK ROLLERSFORMER 5/8" MOUNTING HARDWARE

4X1-4774, 41A, 71A, 73A, 74A, 76A, 82S, 83A, 23U, 90B, 46J, 47J, 55J, 69J, 99J, 10K, 17R, 24U, 49W, 5X1-779

(PER MACHINE) QUANTITY PART NUMBERHEAVY DUTY

PART NUMBER

Double Flange (DF) 6 1 118-1615 2 122-0217 2

Single Flange (SF) 6 118-1614 3 122-0216 3

Components of Group

Roller Shell (DF) 1 6Y-2904 2 9G-8032 4

Roller Shell (SF) 1 6Y-2902 3 9G-8027 5

Extended Wear Life Shell (DF) 6 1 -- 9W-5411 4

Extended Wear Life Shell (SF) 6 1 -- 9W-5408 5

Bushing Assembly 2 2P-8048 2P-8048

Bearing 7 1 8P-5197 8P-5197

Shaft 1 116-6702 8 116-6702 8

End Collar 2 5M-4436 9 5M-4436 9

Ring 2 5M-4443 5M-4443

Bolt 12 2P-3201 1A-2029

Washer 12 -- 5M-2894

Seal -- Duo-Cone Group 2 6Y-0925 1M-8747

Toric Ring 7 2 8H-2262 8H-2262

Seal -- Bushing O-Ring 2 2H-3928 2H-3928

Seal -- Shaft O-Ring 2 5F-8000 5F-8000

Stopper 1 7G-4332 7G-4332

Plug 1 6Y-0473 6Y-0473

Mounting Hardware 10

Bolt 4 1A-8537 1A-8537

Washer 4 2S-0736 2S-0736


Seal -- Duo-Cone Group (Steel Mill) 2 4S-8984 4S-8984

Toric Ring 7 2 9M-9730 9M-9730

Seal -- Bushing O-Ring (Steel Mill) 2 8S-5654 8S-5654

Seal -- Shaft O-Ring (Steel Mill) 2 8M-4436 8M-4436

1 8 required on LGP machines.2 Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.3 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.4 Increased bore hardness. Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer2S-0736.5 Increased bore hardness. Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer2S-0736.6 For use with Extended Wear Life Track.7 Component of preceding assembly or group; quantity shown is per assembly or group.8 Replaces former 5M-4448 shaft; requires 2 -- 5M-4436 end collars. Serviced Replaced By: 1 - Roller Group (DF) 288-0935, or 1 - RollerGroup (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.9 If 5M-4448 shaft is used, use 1 -- 5M-4436 and 1 -- 5M-4435 end collar.10 These components are not included in the roller group; quantities shown are required to mount each roller.

373


D6 TRACK ROLLERSEARLY MACHINE 5/8" MOUNTING HARDWARE

37A, 44A, 8U, 9U


NUMBER



Components of Group




Bearing 3 1 8S-5796

Shaft 1 118-1613 4


Ring 2 6H-7382

Bolt 12 2P-3201





Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 6

Bolt 4 8S-9092

Washer 4 5P-8247






1 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.2 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.3 Component of preceding assembly or group; quantity shown is per assembly or group.4 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Serviced Replaced By:1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.5 If 5M-1915 shaft is used, use 1 -- 5M-0627 and 1 -- 1M-3812 end collar.6 These components are not included in the roller group; quantities shown are required to mount each roller.

374


D6 END GUIDING GUARDS3X, 4X, 5X, 19X, 20X, 2MJ, 8FJ


NUMBER



Wear Strip 1 9S-8245

Bolt 4 7B-3235





Bolt 4 7B-3235


Rear (Outer RH)



Bolt 4 7B-3235


Rear (Outer LH)



Bolt 4 7B-3235


375


D6 END GUIDING GUARDS41A, 71A, 73A, 74A, 76A, 82A, 83A, 23U, 24U, 3X, 4X, 5X, 6X, 19X, 20X, 46J, 47J, 69J, 99J, 10K, 1Y, 49W, 69U,

74W, 75W


NUMBER




Bolt 4 7B-3235





Bolt 4 7B-3235


Rear (Outer RH)



Bolt 4 7B-3235


Rear (Outer LH)



Bolt 4 7B-3235


D6 CENTER GUIDING GUARDS3X, 4X, 5X, 6X, 2MJ, 8FJ


NUMBER



Bolt 4 6H-1717


Bolt 8 1D-4608

Washer 1 2S-0115

Spacer 1 3P-4133

376


D6 CENTER GUIDING GUARDS41A, 71A, 73A, 74A, 76A, 82A, 83A, 23U, 24U, 3X, 4X, 5X, 6X, 19X, 20X, 46J, 47J, 69J, 99J, 10K, 1Y, 49W, 69U,

74W, 75W


NUMBER

Guard Assembly 1 1P-0963


Bolt 4 6H-1717


Bolt 8 1D-4608

Washer 1 2S-0115

Spacer 1 3P-4133

D6 FINAL DRIVE GUARDS41A, 71A, 73A, 74A, 76A, 82A, 83A, 23U, 24U, 3X, 4X, 5X, 6X, 19X, 20X, 46J, 47J, 69J, 99J, 2MJ, 8FJ, 10K, 1Y,

49W, 69U, 74W, 75W


NUMBER

RH 1 9M-5045

LH 1 9M-5045

Bolts 8 0V-0375

Washer 8 0L-1714

Lock Washer 8 2M-0849

377

Low Sprocket TractorsD7E

D7E STD, LGP HEAVY DUTY SEALED AND LUBRICATED TRACKSTD: MDB1-UP LGP: SCG1-UP

8.50" (215.9 mm) PITCH -- 7/8" BOLT




Track Links

RH Pin End Master 6I-9241 1 1

LH Pin End Master 6I-9242 1 1

RH Bushing End Master 6I-9243 1 1

LH Bushing End Master 6I-9244 1 1

RH Regular 6I-9239 39 43

LH Regular 6I-9240 39 43

Other Components

Pin 115-4923 40 44

Bushing 115-4924 40 44


Thrust Ring 152-8073 80 88

Stopper 7G-4332 40 44

Plug 6Y-0454 40 44

Track Hardware 1

Bolt (7/8") 7H-3599 156 172

Nut 2S-2140 156 172

Master Bolt (7/8") 9W-9058 2 2

Master Bolt (7/8") 6V-1723 2 2


378


D7E ROTATING BUSHING TRACKLGP: SCG1-UP

8.50" (215.9 mm) PITCH -- 7/8" BOLT

QUANTITY PART NUMBER



Track Links

RH Pin End Master 1 6I-9241

LH Pin End Master 1 6I-9242

RH Bushing End Master 1 1 165-1760

LH Bushing End Master 1 1 165-1761

RH Regular 1 43 165-1758

LH Regular 1 43 165-1759

Other Components

Pin 44 152-8080

Bushing 44 165-1770

Seal 176 239-7943


Track Hardware 2

Bolt (7/8") 172 7H-3599

Nut 172 2S-2140

Master Bolt (7/8") 2 9W-9058

Master Bolt (7/8") 2 6V-1723

1 Joint Assembly (Includes link and insert). Insert not serviced.2 Not part of link assembly; required to assemble track group.

D7E HEAVY DUTY TRACK SHOES8.50" (215.9 mm) PITCH -- 7/8" BOLT

WIDTHPART

NUMBER



Moderate Service 36" (915 mm) 1 6I-9912

Extreme Service 24" (610 mm) 7T-5969

Extreme Service 26" (660 mm) 1Q-4960

Extreme Service 36" (915 mm) 1 247-0264

1 For use with LGP Machines only.

379


D7E STD/LGP SPROCKETS



Bolt 25 295-7802

Nut 25 8T-3573

Washer 25 8T-3282

D7E STD/LGP IDLERS



Components of Group

Idler Assembly & Bearing 2 192-0223

Bearing 1 2 6Y-1757

Shaft 1 351-8927

Retainer 2 192-0213


Bolt 24 5P-9681

Washer 24 3K-6113

Seal GP - Duo Cone 1 2 162-7862

Seal 2 2H-9247

Seal 2 7J-2036

Collar Seal 2 107-3945

Stopper 1 9G-5664

Plug 1 6Y-0473

Guards

Guard As Rear 2 327-9329

Plate As 2 327-9331

Plate 4 327-9330

Plate 4 329-3982

Bolt M16 8 8T-4140

Washer 12 8T-4122

Bolt Hex Head M16 8 7X-2553

Washer 4 259-8137


D7E CARRIER ROLLERS



380


D7E ROLLERS




Tall Double (DF) 6 323-5931

Mounting Hardware 2

Roller Cap 2 222-7244

Bolt 4 8T-0667

Washer 4 6V-8237

1 8 DF rollers required for LGP machines.2 These components are not included in the roller group; quantities shown are required to mount each roller.

D7E STD/LGP FRONT END GUIDE GUARDS


Plate As RH 2 329-3980

Plate As LH 2 329-3981

Bolt M16 20 8T-4140

Washer 20 259-8137

D7E STD CENTER GUIDE GUARDLevel Two Guiding

Position guard over rollers 3 and 5



Bolt M24 16 8T-5878

Spacer 16 311-2557

D7E LGP CENTER GUIDE GUARDLevel One Guiding

Position guard over roller 4



Bolt M24 8 8T-5878

Spacer 8 311-2557

381


D7E LGP CENTER GUIDE GUARDLevel Two Guiding

Position guard over rollers 3 and 5



Bolt M24 16 8T-5878

Spacer 16 311-2557

D7E STD FULL LENGTH ROLLER GUARDLevel Three Guiding

(Full Length)


Plate 20 299-4179

Bar 10 310-8534

Spacer 20 311-2557



Washer 40 3E-4356

Bolt M24 40 8T-5878

Bolt M16 20 8T-4140

D7E LGP FULL LENGTH ROLLER GUARDLevel Three Guiding

(Full Length)


Plate 24 299-4179

Bar 12 310-8534

Spacer 24 311-2557



Washer 48 3E-4356

Bolt M24 48 8T-5878

Bolt M16 24 8T-4140

382


D7E STD/LGP SPROCKET GUIDE GUARDS


Guard Assembly RH 2 338-7441

Guard Assembly LH 2 338-7442

Guard Assembly RH 2 340-2777

Guard Assembly LH 2 340-2778

Bolt M24 16 8T-5878

Spacer 16 311-2557

Bolt Hex Head M16 28 7X-2553

Washer 28 198-4780

383

Low Sprocket TractorsD7, 571, 572

D7 SEALED AND LUBRICATED TRACKHYBRID, SPLIT MASTER LINKS

47A, 48A, 64A, 79A, 95A, 91E, 92E, 35N, 93N, 94N, 91V, 92V, 64V, 72W, 44W, 45W8.50" (215.9 mm) PITCH -- 3/4" BOLT REGULAR SHOE, 7/8" BOLT MASTER SHOE

PARTNUMBER

38SECTION

41SECTION

Link Assembly -- (Quantity 2) 239-2230 1 239-6882 1


Track Links





RH Regular 233-0385 37 40

LH Regular 233-0386 37 40

Other Components

Pin 199-2794 38 41

Bushing 237-3790 38 41


Thrust Ring 152-8073 76 82

Stopper 7G-4332 38 41

Plug 6Y-0473 38 41

Track Hardware 2

Bolt (3/4") 7H-3598 148 160

Nut 1S-1860 148 160

Master Bolt (7/8") 9W-9058 4 4

Special Sets/Groups



1 To be used with (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746 for master shoe rework.2 Not part of link assembly; required to assemble track group.

D7 MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITYPART

NUMBER


Extreme Service -- 22.0" (560 mm) 2 239-6877

384


D7 SEALED AND LUBRICATED TRACK47A, 48A, 64A, 79A, 95A, 91E, 92E, 35N, 93N, 94N, 91V, 92V, 64V, 72W, 44W, 45W, 3GF, 3ZD, 7MB, C7G

8.50" (215.9 mm) PITCH -- 3/4" BOLT

PARTNUMBER

38SECTION

41SECTION



Track Links

RH Pin End Master 2P-9653 1 1

LH Pin End Master 2P-9654 1 1

RH Bushing End Master 2P-9655 1 1

LH Bushing End Master 2P-9656 1 1

RH Regular 8S-2589 37 40

LH Regular 8S-2590 37 40

Other Components

Pin 3P-0622 38 41

Bushing 3P-0621 38 41


Thrust Ring 3P-0623 76 82

Stopper 7G-4332 38 41

Plug 6Y-0473 38 41

Track Hardware 3

Bolt 7H-3598 148 160

Nut 1S-1860 148 160

Master Bolt 2P-9670 4 4

Special Sets/Groups

Bushing and Seal Group (38 Sections) 6I-8060 4 1 1


1 Service replaced by (1) 239-2230 hybrid link assembly and (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746for master shoe rework.2 Service replaced by (1) 239-6882 hybrid link assembly and (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746for master shoe rework.3 Not part of link assembly; required to assemble track group.4 Contains Extended Wear Life Bushings (8E-5258).

385


D7 SEALED TRACKHYBRID, SPLIT MASTER LINKS

47A, 48A, 64A, 79A, 95A, 91E, 92E, 35N, 93N, 94N, 91V, 92V8.50" (215.9 mm) PITCH -- 3/4" BOLT REGULAR SHOE, 7/8" BOLT MASTER SHOE

QUANTITYPART

NUMBER



Track Links







Other Components

Pin 38 8E-4272

Bushing 38 247-1475

Seal 152 8M-6239

Track Hardware 2

Bolt (3/4") 148 7H-3598

Nut 148 1S-1860

Master Bolt (7/8") 4 9W-9058

1 To be used with (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746 for master shoe rework. If 41 section linkassembly is required order 246-5808 and add 3 sections.2 Not part of link assembly; required to assemble track group.

386


D7 SEALED TRACK47A, 48A, 64A, 79A, 95A, 91E, 92E, 35N, 93N, 94N, 91V, 92V

8.50" (215.9 mm) PITCH -- 3/4" BOLT

QUANTITYPART

NUMBER

Link Assembly -- 38 Section 2 3P-0955 1


Track Links







Other Components

Pin 38 8E-4272

Bushing 38 1M-3669

Seal 152 8M-6239

Track Hardware 2

Bolt 148 7H-3598

Nut 148 1S-1860


Special Sets/Groups


1 Service replaced by (1) 246-5808 link assembly and (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746 formaster shoe rework. If 41 section link assembly is required order 246-5808 and add 3 sections.2 Not part of link assembly; required to assemble track group.

387



CURRENT, LARGE O.D. BUSHING8.50" (215.9 mm) PITCH -- 3/4" BOLT

QUANTITYPART

NUMBER

Link Assembly -- 38 Section 2 - 2


Track Links







Other Components

Pin 38 3P-0622




Stopper 38 7G-4332

Plug 38 6Y-0473

Track Hardware 4

Bolt 148 7H-3598

Nut 148 1S-1860


Special Sets/Groups



1 Note: Extended Wear Link Assemblies require special rollers and idlers to match the high rail link; refer to roller and idler sections fordetails.2 Canceled replaced by (1) 239-2230 hybrid link assembly and (5) 197-9679 sprocket segments. Refer to Special Instruction FormREHS1746 for master shoe rework.3 If small O.D. Bushing required use part no. 3P0621.4 Not part of link assembly; required to assemble track group.

388


571,572 PIPELAYER TRACK571: 16W

572: 40U, 65A8.50" (215.9 mm) PITCH -- 3/4" BOLT

SEALEDPART

NUMBER571

38 SECTION572

39 SECTION

Link Assembly -- (Quantity 2) 3P-0955 1 -- 2


Track Links







Other Components

Pin 8E-4272 38 39

Bushing 1M-3669 38 39

Seal 8M-6239 152 156

Track Hardware 3

Bolt 7H-3598 148 152

Nut 1S-1860 148 152


Special Sets/Groups


1 Service replaced by (1) 246-5808 link assembly and (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746 formaster shoe rework.2 Order 38 Section, 246-5808 Link Assembly and add 1 section.3 Not part of link assembly; required to assemble track group.

389


D7, 572 SEALED TRACKD7 (36, 37, 40 SECTION): 7M, 3T, 17A

D7, 572 (41 SECTION): 7M, 3T, 17A, 21A8.00" (203.2 mm) PITCH -- 3/4" BOLT




Track Links



Other Components

Pin 40 6B-5882


Bushing 40 8M-7289



Spacer 2 8M-7290

Track Hardware 2

Bolt 164 1S-1859

Nut 164 1S-1860

1 If 36, 37, 40, section link assemblies are required order 1S-6943 and remove appropriate number of sections.2 Not part of link assembly; required to assemble track group.

D7, 571, 572 HYBRID TRACK SHOESUSE WITH TRACK LINKS 233-0385, 233-0386

8.50" (215.9 mm) PITCH - 3/4" BOLT REGULAR SHOE, 7/8" BOLT MASTER SHOE



Extreme Service 20.0" (510 mm) 5S-6909 1Q-4919

Extreme Service 22.0" (560 mm) 5S-6910 1Q-4956

Extreme Service 24.0" (610 mm) 5S-6911 243-5731

Moderate Service 22.0" (560 mm) 1P-9808 243-5729




Double Grouser 18.0" (460 mm) 8E-4434 263-9760

Double Grouser (Trapezoidal Opening) 18.0" (460 mm) 8E-4436 263-9761


Chopper (Trapezoidal Opening) 20.0" (510 mm) 8E-8325 8E-8324

390


D7, 571, 572 TRACK SHOES8.50" (215.9 mm) PITCH -- 3/4" BOLT



Extreme Service 20.0" (510 mm) 5S-6909 3P-0619



Moderate Service 18.0" (460 mm) 6P-3068 6P-3069








Double Grouser (Trapezoidal Opening) 18.0" (460 mm) 8E-4436 8E-4437


Triple Grouser (Center Punched Slots) 18.0" (460 mm) 8S-4468 8E-4437 1

Steel Mill Flat 16.0" (405 mm) 7T-1312 7T-1313

Self Cleaning 34.0" (865 mm) 6P-2647 6P-2648 2


1 Double Grouser2 Service replaced by: 276-5411 shoe, 2- 6V-1725 bolt and 2- 9W-9058 bolt.

D7, 571, 572 TRACK SHOES8.00" (203.2 mm) PITCH -- 3/4" BOLT

TYPE WIDTHPART

NUMBER

Extreme Service 22.0" (560 mm) 6Y-6402

Double Grouser 18.0" (460 mm) 8E-4424

Triple Grouser ( Slots) 18.0" (460 mm) 8S-4468

D7, 571, 572 SPROCKETS47A3396-UP, 35N, 93N, 94N, 95N, 96N, 48A6393-UP, 40U, 91V, 92V, 16W, 64A152-UP, 44W, 45W, 72W,

65A751-UP8.50" (215.9 mm) PITCH -- 3/4" BOLT


NUMBER

Sprocket Hub 1 9G-0007


Mud/Snow Segment (Tough Steel) (5 Tooth) 5 255-9219

Bolt 20 282-3655

Nut 20 7H-3608

391


D7, 571, 572 SPROCKETS47A1-3395, 48A1-6392, 64A1-151, 65A1-750

8.50" (215.9 mm) PITCH -- 3/4" BOLT


NUMBER

Sprocket Hub 1 3S-9993




Rim (Not to be used with Hybrid Track) 1 5M-3022

Bolt 20 282-3655

Nut 20 7H-3608

D7, 572 SPROCKETS7M, 3T, 17A, 21A

8.00" (203.2 mm) PITCH -- 3/4" BOLT


NUMBER

Sprocket Hub 1 3S-9140

Sprocket Segment (5 Tooth) 2 3S-9138



Rim 1 3S-7090

Bolt 26 282-3655

Nut 26 7H-3608

392


D7, 571, 572 IDLERS47A, 48A, 64A, 65A, 91E, 92E, 35N, 93N, 94N, 40U, 91V, 92V, 44W, 45W, 72W, 17A18761-UP


NUMBER PART NUMBER

Idler Assembly (Standard) 2 9H-8489 9H-8489

Idler Assembly (Optional) 1 2 1S-8186 1S-8186

Extended Wear Idler Assembly 2 2 7T-4509 277-4492

Other Components


Bearing 3 1 8P-6651 8P-6651

Shaft 1 8M-0343 9M-9758

Bearing Block 1 8M-0341 7G-1901

Bearing Block 1 8M-0342 7G-1902

Seal -- Duo-Cone Group 2 6Y-0925 6Y-0925

Toric Ring 3 2 8H-2262 8H-2262



Seal -- Plug 1 1S-8947 1S-8947

Bolt 12 3B-1915 3B-1915

Washer 12 3B-4506 3B-4506

Plug 1 2P-0347 2P-0347

Pin 2 8M-0344 5M-5000



Toric Ring 3 2 9M-9730 9M-9730

Seal -- Bushing O-Ring (Steel Mill) 2 9M-9729 9M-9729

Seal -- Shaft O-Ring (Steel Mill) 2 8M-4390 8M-4390

1 Heavy Duty (Reinforcing plates for strength).2 For use with Extended Wear Life Track.3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

393


D7, 571, 572 CARRIER ROLLERS47A, 48A, 64A, 65A, 35N, 93N, 94N, 40U, 91V, 92V, 16W, 44W, 45W, 91E, 72W, 93E


NUMBER

Group 4 1P-8717

Components of Group


Shaft 1 1P-8715

Cup 2 9S-3581

Cone 2 9S-3582

Ring 1 7H-4574

Cover 1 5M-2043


Plug 1 2P-0347

Bolt 3 0S-1594












Toric Ring 1 2 162-2166


394


D7, 571, 572 CARRIER ROLLERS17A, 21A


NUMBER

Group 4 -- 1

Components of Group

Roller Shell 1 9S-8321

Shaft 1 4S-9692

Cup 2 7H-4566

Cone 2 7H-4573

Ring 1 7H-4574

Cover 1 9M-0632


Support Assembly 1 9H-7687 2

Plug 1 2P-0347

Bolt 4 0S-1594




Seal -- Support 1 5F-3144






1 Upgrade to 1P-8717 group.2 Service replaced by 188-5612.3 Component of preceding group; quantity shown is the quantity per group.

395


D7, 571, 572 TRACK ROLLERS7/8" MOUNTING HARDWARE

91E, 92E, 35N, 93N, 94N, 95N, 96N, 40U, 91V, 92V, 16W, 44W, 45W, 72W


NUMBER



Extended Wear Life (DF) 4 6 118-1637 2


Components of Group



Extended Wear Life (DF) 4 1 9W-8356

Extended Wear Life (SF) 4 1 9W-8359


Bearing 5 1 8P-6651

Shaft 1 118-1628 6

End Collar 2 9S-0312 7

Bolt 12 2P-3201

Ring 2 6H-2953





Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 8

Bolt 4 1D-4629

Washer 4 9H-1031


Double Flange (DF) (Steel Mill) 6 118-1631

Single Flange (SF) (Steel Mill) 6 118-1630



Seal -- Bushing O-Ring (Steel Mill) 2 9M-9729


1 8 DF rollers required for LGP machines.2 Serviced Replaced By: 1 - Roller Group (DF) 323-5928, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.3 Serviced Replaced By: 1 - Roller Group (SF) 323-5925, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.4 For use with Extended Wear Life Track.5 Component of preceding assembly or group; quantity shown is per assembly or group.6 Replaces former 9S-0313 shaft.7 If 9S-0313 shaft is used, use 9S-0312 (1) and 9S-0311 (1) end collar.8 These components are not included in the roller group; quantities shown are required to mount each roller.

396


D7, 571, 572 TRACK ROLLERS3/4" MOUNTING HARDWARE47A, 48A, 64A, 65A, 79S, 95A


NUMBER



Extended Wear Life (DF) 4 6 --

Extended Wear Life (SF) 4 6 --

Components of Group






Bearing 5 1 8P-6651

Shaft 1 118-1628 6


Bolt 12 2P-3201

Ring 2 6H-2953





Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 8

Bolt 4 1D-4609

Washer 4 5H-1504






1 8 rollers required for LGP machines.2 Service replaced by 188-5258.3 Service replaced by 188-5257.4 For use with Extended Wear Life Track.5 Component of preceding assembly or group; quantity shown is per assembly or group.6 Replaces former 7M-5109 shaft.7 If 7M-5109 is used, use 7M-5112 (1) and 7M-5111 (1) end collar.8 These components are not included in the roller group; quantities shown are required to mount each roller.

397


D7, 571, 572 TRACK ROLLERS5/8" MOUNTING HARDWARE

17A, 21A


NUMBER





Components of Group






Bearing 3 1 8P-6651

Shaft 1 5M-1712

End Collar 1 7M-3308


Bolt 12 2P-3201

Ring 2 6H-2953





Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 4

Bolt 4 0S-2318

Washer 4 3B-4510






1 8 rollers required for LGP machines.2 For use with Extended Wear Life Track.3 Component of preceding assembly or group; quantity shown is per assembly or group.4 These components are not included in the roller group; quantities shown are required to mount each roller.

398


D7 END GUIDING GUARDS47A, 48A, 79A, 95A, 91E, 92E, 35N, 93N, 94N, 91V, 92V, 44W, 45W, 72W


NUMBER




Bolt 4 0S-1592





Bolt 4 0S-1592


Rear (Outer RH)



Bolt 4 0S-1592


Rear (Outer LH)



Bolt 4 0S-1592


D7 TRACK ROLLER GUARDSPARTIAL91V, 92V


NUMBER

Guard Assemblies

Inner RH 1 6P-7625

Inner LH 1 6P-7626

Outer RH 1 6P-7627

Outer LH 1 6P-7627

399


D7 TRACK ROLLER GUARDSFULL

91V, 92V


NUMBER

Guard Assemblies

Inner RH 1 6P-7622

Inner LH 1 6P-7623

Outer RH 1 6P-7614

Outer LH 1 6P-7614

D7 TRACK ROLLER GUARDSFULL

93N, 94N


NUMBER

Guard Assemblies

Inner RH 1 9S-1669

Inner LH 1 9S-1670

Outer RH 1 9S-1671

Outer LH 1 9S-1671

571, 572 TRACK ROLLER GUARDSFULL16W


NUMBER

Guard Assemblies

Inner RH 1 6P-7622

Inner LH 1 6P-7623

Outer RH 1 6P-7614

Outer LH 1 6P-7614

571, 572 TRACK ROLLER GUARDSFULL40U


NUMBER

Guard Assemblies

Inner RH 1 6P-8803

Inner LH 1 6P-8804

Outer RH 1 6P-8806

Outer LH 1 6P-8806

400


571, 572 TRACK ROLLER GUARDSFULL95N


NUMBER

Guard Assemblies

Inner RH 1 9S-1669

Inner LH 1 9S-1670

Outer RH 1 9S-1671

Outer LH 1 9S-1671

D7 FINAL DRIVE GUARDS47A, 48A, 79A, 95A, 91E, 92E, 35N, 93N, 94N, 91V, 92V


NUMBER

RH 1 7M-1890

LH 1 7M-1889

Bolts 8 1D-4586


401


D8, CLASSIC SEALED AND LUBRICATED TRACKLONG AND SHORT UNDERCARRIAGE (7 & 6 ROLLER)

22A, 35A, 36A, 46A, 68A, 66V, 76V, 77V9.00" (228.6 mm) PITCH -- 7/8" BOLT




Track Links

RH Master Links (Split Master Complete) 1 188-5712

LH Master Links (Split Master Complete) 1 188-5711



Other Components

Pin 41 188-5710

Bushing 41 188-5658



Stopper 41 7G-4332

Plug 41 6Y-0473

Track Hardware

Bolt 2 160 188-5639

Nut 2 160 188-5857

Master Bolt (Included with link assembly) 4 188-5640

1 If 39 section link assembly is required, order 188-5310 and remove two sections.2 Not part of link assembly; required to assemble track group.

402


D8, 583 CLASSIC SEALED TRACKLONG AND SHORT UNDERCARRIAGE (7 & 6 ROLLER)22A, 35A, 36A, 46A, 68A, 66V, 76V, 77V, 38A, 61A, 79V

9.00" (228.6 mm) PITCH -- 7/8" BOLT




Track Links

RH Master Links (Split Master Complete) 1 188-5712

LH Master Links (Split Master Complete) 1 188-5711



Other Components

Pin 41 1M-1455

Bushing 41 8M-2619 2

Seal 164 8M-2620

Track Hardware

Bolt 3 160 188-5639

Nut 3 160 188-5857

Master Bolt (Included with link assembly) 4 188-5640

1 Sealed link assembly is no longer offered. Sealed and Lubricated link assembly 41 sections 188-5310 is available. If 39 or 42 section linkassemblies are required, order 188-5310 and add or remove appropriate number of sections.2 Serviced Replaced By 290-0844.3 Not part of link assembly; required to assemble track group.

403


D8 SEALED & LUBRICATED TRACKD8 (39 SECTION: 6 ROLLER); D8 (41 SECTION: 7 ROLLER)

22A, 35A, 36A, 46A, 68A, 66V, 76V, 77V9.00" (228.6 mm) PITCH -- 7/8" BOLT

PART NUMBER39

SECTION41

SECTION

Link Assembly -- (Quantity 2) 9W-8938 1 9W-8937 2


Track Links

RH Pin End Master 7S-9601 3 1 1

LH Pin End Master 7S-9602 4 1 1

RH Bushing End Master 7S-9603 3 1 1

LH Bushing End Master 7S-9604 4 1 1

RH Regular 7S-9181 5 38 40

LH Regular 7S-9182 6 38 40

Other Components

Pin 2P-9486 7 39 41

Bushing 2P-9484 8 39 41


Thrust Ring 9W-3563 9 78 82

Stopper 7G-4332 39 41

Plug 6Y-0473 39 41

Track Hardware 10

Bolt 7H-3599 152 160

Nut 2S-2140 152 160


Special Sets/Groups


Bushing and Seal Group (41 Sections) 9W-8936 1 1

1 Serviced Replaced By Classic Sealed and Lubricated Link Assembly 188-5310 and remove 2 sections.2 Serviced Replaced By Classic Link Assembly 188-5310.3 Service Replaced by 188-5712.4 Service Replaced by 188-5711.5 Service Replaced by 188-5531.6 Service Replaced by 188-5532.7 Service Replaced by 188-5710.8 Serviced Replaced By Classic 188-5658.9 Service replaced by 188-5689.10 Not part of link assembly; required to assemble track group.

404


D8, 583 PIPELAYER SEALED TRACKD8 (39, 41 SECTIONS) 22A, 35A, 36A, 46A, 68A, 66V, 76V, 77V

583 (42 SECTION) 38A, 61A, 79V9.00" (228.6 mm) PITCH -- 7/8" BOLT




Track Links





RH Regular 40 7S-9181 2

LH Regular 40 7S-9182 3

Other Components

Pin 41 1M-1455

Bushing 41 8M-2619

Seal 164 8M-2620

Track Hardware 4

Bolt 160 7H-3599

Nut 160 2S-2140


Special Sets/Groups


1 Service Replaced By 188-5310 Classic Sealed and Lubricated Link Assembly. If 39, 42 section link assemblies are required order188-5310 and add or remove appropriate number of sections.2 Service Replaced by 188-5531.3 Service Replaced by 188-5532.4 Not part of link assembly; required to assemble track group.

405


D8, 583 SEALED TRACKD8: 13A, 14A, 15A; 583: 16A

8.00" (203.2 mm) PITCH -- 3/4" BOLT


Link Assembly -- 42 Section 2 -


Track Links



Other Components

Pin 41 4B-6620


Bushing 41 8M-7230



Spacer 2 8M-7232

Track Hardware 1

Bolt 168 7H-3598

Nut 168 1S-1860

1 Not Part of Link Assembly; required to assemble track group.

D8, 583 CLASSIC TRACK SHOES 1

9.00" (228.6 mm) PITCH -- 7/8" BOLT



Super Extreme Service 2 22.0" (560 mm) 188-5617 188-5618

Super Extreme Service 2 24.0" (610 mm) 188-5313 188-5314











Moderate Service (Clipped Grouser) 30.0" (760 mm) 281-6373 281-6374

1 When replacing a Genuine ES shoe with Classic ES shoe, or a Genuine MS shoe with a Classic MS shoe, or a Genuine ES shoe with aClassic MS shoe, or a Genuine MS shoe with a Classic ES shoe a PONTENTIAL INTERFERENCE MAY OCCUR. When replacing a GenuineSES shoe with a Classic ES shoe INTERFERENCE WILL OCCUR. Grinding/machine of the leading or trialing edge might/will be required inorder to provide clearance between the adjacent shoes. If more than one genuine shoe must be replaced, position the shoes on the chaintogether. This will provide that any required grinding/machining will only be required at one location. Refer to Service Magazine titled"Genuine Track Shoes are being replace with Classic Track Shoes" Media No. SEPD0872-00 dated January 22, 2007.2 Serviced Replaced by Classic Extreme Service Shoe.3 Serviced Replaced by Classic Moderate Service Shoe.

406


D8 SPROCKETS77V3958 - UP

9.00" (228.6 mm) PITCH


NUMBER


Sprocket Group (Contains 9 segments, no hardware) (3 Tooth) (Classic) 1 188-5641

Bolt 27 9S-2727

Nut 27 7H-3609

D8 SPROCKETS76V, 77V1-3957

9.00" (228.6 mm) PITCH


NUMBER



Bolt 27 9S-2727

Nut 27 7H-3609

D8 SPROCKETS35A, 36A, 46A

9.00" (228.6 mm) PITCH


NUMBER



Rim 1 1S-8725

Bolt 27 9S-2727 1

Nut 27 7H-3609

1 For machines with serial numbers 36A4649-5022, 46A2234-2787, 46A12585-17168, use 3S-7837 bolt.

D8 SPROCKETSOPTIONAL

13A, 14A, 15A, 1H, 8R, 2U9.00" (228.6 mm) PITCH


NUMBER


Rim 1 2M-8810

Bolt 20 3S-7837

Nut 20 7H-3609

407


D8 SPROCKETS13A, 14A, 15A, 1H, 8R, 2U8.00" (203.2 mm) PITCH


NUMBER


Bolt 21 3S-7837

Nut 21 7H-3609

583 SPROCKETS78V

9.00" (228.6 mm) PITCH


NUMBER



Bolt 27 9S-2727

Nut 27 7H-3609

583 SPROCKETS38A, 61A1-UP

9.00" (228.6 mm) PITCH


NUMBER



Rim 1 1S-8725

Bolt 27 9S-2727 1

Nut 27 7H-3609

1 For machines with serial number 61A199-400, use 3S-7837 bolt.

D8, 583 CLASSIC IDLERS76V5006-UP, 61A627-UP, 36A5151-UP, 46A20428-UP, 76V, 77V, 78V

Fits low position idlers with reference bearing blocks 9S-4325/26.


NUMBER

Idler Group (Complete) 2 200-9238 1


1 Fits low position idlers with reference bearing blocks 9S-4325/26.

408


D8, 583 IDLERS76V5006-UP, 61A627-UP, 36A5151-UP, 46A20428-UP, 76V, 77V, 78V


NUMBER

Idler Assembly 2 9S-7221 1

Other Components


Bearing 2 2 8P-6650

Shaft 1 9S-4324 3

Bearing Block 1 9S-4325 3

Bearing Block 1 9S-4326 3



Seal -- Bushing O-Ring 2 5F-3106



Bolt 12 0S-1585

Washer 12 3B-4508

Plug 1 2P-0347

Spacer 4 7M-8056

Lock 2 1S-3513




1 Service Replaced by Classic part number 188-5610.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 For low position idlers only.

409


D8, 583 IDLERS35A, 38A, 36A1-5156, 46A1-20427, 61A1-626, 77V1-5006


NUMBER


Other Components


Bearing 2 2 8P-6650

Shaft 1 5M-1245








Bolt 12 0S-1585

Washer 12 3B-4508

Plug 1 2P-0347

Spacer 4 7M-8056

Lock 2 1S-3513




1 Service Replaced by Classic part number 188-5610.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

D8, 583 CLASSIC CARRIER ROLLERS14A, 15A, 16A, 35A, 38A, 61A, 36A, 46A1, 76V, 77V, 78V

INSIDE MOUNT/OUTSIDE MOUNT


NUMBER


410


D8, 583 CARRIER ROLLERSOUTSIDE MOUNT

36A3500-UP, 46A3889-UP, 76V, 77V, 78V


NUMBER

Group 4 8P-6256 1

Components of Group

Roller Shell 1 8P-6245 1

Shaft 1 8P-6255 2

Cup 2 7K-5448

Cone 2 7K-5449

Ring 1 9H-7759

Cover 1 5M-2043


Plug 1 2P-0347

Bolt 4 0S-1594









1 Service Replaced by Classic Carrier Roller Group part number 188-5612.2 No longer serviced.3 Component of preceding group; quantity shown is the quantity per group.

411


D8, 583 CARRIER ROLLERSINSIDE MOUNT

14A, 15A, 16A, 35A, 38A, 61A, 36A1-3449, 46A1-3888


NUMBER

Group 4 -- 1

Components of Group

Roller Shell 1 9S-8304 1

Shaft 1 5M-1246 1

Cup 2 6Y-7652

Cone 2 4B-7255

Ring 1 9H-7759

Cover 1 5M-1669



Plug 1 2P-0347

Bolt 3 0S-1594










1 Service Replaced by Classic Carrier Roller Group part number 188-5612.2 Component of preceding group; quantity shown is the quantity per group.

D8, 583 CLASSIC TRACK ROLLERS35A, 36A, 38A, 46A, 61A, 76A, 77V, 78V


NUMBER

Double Flange (DF) (1" Mounting Hardware) 8 1 188-5608

Single Flange (SF) (1" Mounting Hardware) 6 188-5607

Double Flange (DF) (7/8" Mounting Hardware) 8 1 281-6386

Single Flange (SF) (7/8" Mounting Hardware) 6 281-6380

Mounting Hardware 2

Bolt (1") 4 1D-4640

Washer (1") 4 3K-5235

Bolt (7/8") 4 1D-4630

Washer (7/8") 4 3B-4514

1 6 Double Flange roller required for 6 roller frame machines.2 These components are not included in the roller group; quantities shown are required to mount each roller.

412


D8, 583 TRACK ROLLERS35A, 36A, 38A, 46A, 61A, 76A, 77V, 78V


NUMBER

Double Flange (DF) (7/8" Mounting Hardware) 8 1 9P-3309 2

Double Flange (DF) (1" Mounting Hardware) 8 1 6P-4898 3

Single Flange (SF) (7/8" Mounting Hardware) 6 9P-3308 4

Single Flange (SF) (1" Mounting Hardware) 6 6P-4897 5

Components of Group

Roller Shell (DF) 1 6P-3307 6

Roller Shell (SF) 1 6P-3303 7

Bushing Assembly 2 2P-8052 8

Bearing 9 1 8P-6650

Shaft 1 5M-1247 8

End Collar (7/8" Mounting Hardware) 2 4S-8099 10

End Collar (1" Mounting Hardware) 2 7S-7936 11

Bolt 12 0S-1585

Bolt 12 3B-4508

Pin 2 1T-0068





Seal -- Plug O-Ring 1 1S-8947

Plug 1 2P-0347

Mounting Hardware 12

Bolt (7/8") 4 1D-4630

Bolt (1") 4 1D-4640

Washer (7/8") 4 3B-4514

Washer (1") 4 3K-5234


Double Flange (DF) (Arctic) (1" Mounting Hardware) 8 1 7G-8809 13

Single Flange (SF) (Arctic) (1" Mounting Hardware) 6 7G-8810 14





1 6 Double Flange rollers required for 6 roller frame machines.2 Serviced Replaced By Classic Roller Group part number 281-6386.3 Serviced Replaced By Classic Roller Group part number 188-5608.4 Serviced Replaced By Classic Roller Group part number 281-6380.5 Serviced Replaced By Classic Roller Group part number 188-5607.6 Serviced Replaced By Classic Roller Groups part number (188-5608 with 1" mounting bolts) or (281-6386 with 7/8" mounting bolts).7 Serviced Replaced By Classic Roller Groups part number (188-5607 with 1" mounting bolts) or (281-6380 with 7/8" mounting bolts).8 Serviced Replaced By one of the following Classic Roller Group part numbers: (188-5608 DF with 1" mounting bolts); (188-5607 SF with1" mounting bolts); (281-6386 DF with 7/8" mounting bolts); (281-6380 SF with 7/8" mounting bolts).9 Component of preceding assembly or group; quantity shown is per assembly or group.10 Serviced Replaced By Classic Roller Group part number (281-6386 Double Flange) or (281-6380 Single Flange).11 Serviced Replaced By Classic Roller Group part number (188-5608 Double Flange) or (188-5607 Single Flange).12 These components are not included in the roller group; quantities shown are required to mount each roller.13 Serviced Replaced By the following Roller Group and Seals: 1 - Classic Roller Group (DF) 188-5608; 4 - Toric Ring 8S-5653; 2 - BushingO-Ring Seal 4S-5898; 2 - Shaft O-Ring Seal 5M-3038; 1 - Plug O-Ring Seal 2P-2975.14 Serviced Replaced By the following Roller Group and Seals: 1 - Classic Roller Group (DF) 188-5607; 4 - Toric Ring 8S-5653; 2 - BushingO-Ring Seal 4S-5898; 2 - Shaft O-Ring Seal 5M-3038; 1 - Plug O-Ring Seal 2P-2975.

413


D8, 583 TRACK ROLLERS14A, 15A, 16A8.00" PITCH


NUMBER



Components of Group

Roller Shell (DF) 12

Roller Shell (SF) 1 8H-5376

Bushing Assembly 2 8H-5377

Bearing 3 12

Shaft 1 5M-1712

End Collar (Inner) 1 8H-5381

End Collar (Outer) 1 8H-5380

Bolt 12 0S-1585

Washer 12 3B-4508

Ring 2 6H-6237





Plug 1 2P-0347

Mounting Hardware 4

Bolt 4 1D-4630

Washer 4 3B-4514






1 6 Double Flange rollers required for 6 roller frame machines.2 No Longer Serviced.3 Component of preceding assembly or group; quantity shown is per assembly or group.4 These components are not included in the roller group; quantities shown are required to mount each roller.

414


D8 END GUIDING GUARDS38A3864-UP, 46A6151-UP, 76V, 77V


NUMBER




Bolt 4 0S-1973





Bolt 4 0S-1973


Rear (Outer RH)



Bolt 4 0S-1973


Rear (Outer LH)



Bolt 4 0S-1973


415


D8 END GUIDING GUARDS36A3500-3863, 46A3889-6150


NUMBER


Guard Assembly 11


Bolt 4 0S-1973



Guard Assembly 11


Bolt 4 0S-1973


Rear (Outer RH)

Guard Assembly 11


Bolt 4 0S-1973


Rear (Outer LH)

Guard Assembly 11


Bolt 4 0S-1973


1 No Longer Serviced.

D8 TRACK ROLLER GUARDS76V, 77V


NUMBER

Front (Guard Assemblies)

Inner RH 1 6P-7693

Inner LH 1 6P-7692

Outer RH 1 6P-7692

Outer LH 1 6P-7693

Rear (Guard Assemblies)

Inner RH 1 6P-7691

Inner LH 1 6P-7694

Outer RH 1 6P-7693

Outer LH 1 6P-7692

416


D8, 583 FINAL DRIVE GUARDS36A3916-UP, 46A6659-UP, 61A, 76V, 77V, 78V


NUMBER

RH 1 6P-0549

LH 1 6P-0549

Bolts 12 1S-0454


417


D9 SEALED AND LUBRICATED TRACK 1

38 SECTION: 18A2451-UP, 19A1808-UP, 34A, 49A, 50A39 SECTION: 66A, 90J, 91J, 29N, 30N, 90V, 97V, 98V, 99V, 12U

10.25" (260.4 mm) PITCH -- 1" BOLT

PARTNUMBER

38SECTION

39SECTION

Link Assembly -- 39 Section -- 2 9W-8320


Track Links

RH Pin End Master 8S-0943 1 1

LH Pin End Master 8S-0944 1 1





Other Components

Pin 2P-9423 38 39

Bushing 2P-9424 38 39



Stopper 7G-4332 38 39

Plug 6Y-0473 38 39

Track Hardware 3

Bolt 2M-5657 148 152

Nut 1S-6421 148 152


Special Sets/Groups


Bushing and Seal Group (39 Sections) 9W-8381 1 1

1 Order these parts for D9D's converted to 10.25" pitch track.2 Order 39 Section -- 9W-8320 Link Assembly and remove 1-section.3 Not part of link assembly; required to assemble track group

418


D9, 594 PIPELAYER SEALED TRACK 1

D9 (38 SECTION): 18A2451-UP, 19A1808-UP, 34A, 49A, 50AD9 (39 SECTION): 66A, 90J, 91J, 29N, 30N, 90V, 97V, 98V, 99V, 12U

594 (42 SECTION): 62H10.25" (260.4 mm) PITCH -- 1" BOLT

QUANTITYPART

NUMBER



Track Links







Other Components

Pin 39 2M-5652

Bushing 39 2S-0253

Seal 156 1S-4446

Track Hardware 3

Bolt 152 2M-5657

Nut 152 1S-6421


1 Order these parts for D9Ds converted to 10.25" pitch.2 If 38, 42 section link assemblies are required, order 8S-1731 and add or remove appropriate number of sections.3 Not part of link assembly; required to assemble track group

D9, 594 TRACK SHOES10.25" (260.4 mm) PITCH - 1" BOLT



Super Extreme Service 1 24.0" (610 mm) 3T-5971 3T-5970

Super Extreme Service 1 27.0" (685 mm) 6T-5857 6T-5858

Extreme Service 20.0" (510 mm) 3T-8557 3T-8556




Extreme Service 2 34.0" (865 mm) 3T-8565 3T-8564

Extreme Service (Clipped) 2 40.0" (1015 mm) 3T-8497 3T-8494

1 Use 3T-6308 bolts with Super Extreme Service Shoes2 For use on 594 pipelayers only.

419


D9 SPROCKETS90J, 91J, 29N, 30N, 90V, 97V, 98V, 99V, 12U

10.25" (260.4 mm) PITCH


NUMBER


Sprocket Hub (Riveted Mud Guard) 1 3P-3327

Sprocket Segment (3 Tooth) 9 6T-6781

Bolt 27 5P-0233 1

Nut 27 2M-5656

1 Use 9S-2728 bolts for machine serial numbers 90J1-109 and 91J1-109.

D9 SPROCKETS66A12746-UP

10.25" (260.4 mm) PITCH


NUMBER



Bolt 27 5P-0233

Nut 27 2M-5656

D9 SPROCKETS66A6155-12745

10.25" (260.4 mm) PITCH


NUMBER



Bolt 27 5P-0233 1

Nut 27 2M-5656

1 Use 9S-2728 bolts for machine serial numbers 66A6155-12655.

D9 SPROCKETS66A4606-6154

10.25" (260.4 mm) PITCH


NUMBER



Bolt 27 3S-7461

Nut 27 2M-5656

420


594 SPROCKETS96V, 62H51-UP

10.25" (260.4 mm) PITCH


NUMBER



Bolt 27 9S-2728

Nut 27 2M-5656

594 SPROCKETS62H1-50

10.25" (260.4 mm) PITCH


NUMBER



Bolt 27 3S-7461

Nut 27 2M-5656

D9, 594 IDLERS


NUMBER PART NUMBER

Idler Assembly 2 5S-1532 5S-1532

Other Components


Bearing 1 2 8P-5430 8P-5430

Shaft 1 5M-1667 1S-3514

Bearing Block 1 9H-6981 1S-3512

Bearing Block 1 9H-6982 1S-3511

Seal -- Duo-Cone Group 2 9W-2201 9W-2201

Toric Ring 1 2 6H-1309 6H-1309



Seal -- Plug 1 1S-8947 1S-8947

Plug 1 2P-0347 2P-0347


Seal -- Duo-Cone Group 2 3P-1848 3P-1848

Toric Ring 1 2 3P-1847 3P-1847

Seal -- Bushing O-Ring 2 9N-2693 9N-2693

Seal -- Shaft O-Ring 2 6L-9965 6L-9965


421


D9, 594 CARRIER ROLLERS66A, 90J, 91J, 62H, 29N, 30N, 90V, 96V, 97V, 98V, 99V, 12U


NUMBER PART NUMBER

Group 4 -- 1 3P-3403

Components of Group

Roller Shell 1 9S-8322 3P-3399

Shaft 1 - 3P-3402

Cup 2 5P-9532 1P-2636

Cone 1 7H-2621 1P-2662

Ring 1 8F-0737 8F-0737

Support 1 7H-2623 7H-2623

Cover 1 5M-1669 5M-1669

Dowel 4 9H-7078 9H-7078


Toric Ring 2 2 8H-2265 8H-2265

Seal -- Cover 1 2H-3928 2H-3928

Seal -- Inner Support 1 2H-3935 2H-3935



Seal -- Duo-Cone Group 2 8S-5656 8S-5656

Toric Ring 2 2 8S-5653 8S-5653

1 Upgrade to 3P-3403 Group.2 Component of preceding group; quantity shown is the quantity per group.

422


D9, 594 TRACK ROLLERS1" MOUNTING HARDWARE

12U, 29N, 30N, 62H49-UP, 66A5855-UP, 90J, 90V, 91J, 96V, 97V, 99V


NUMBER

Double Flange (DF) 8 1 8P-5604

Single Flange (SF) 6 1 8P-5605

Components of Group




Bearing 2 1 8P-5430

Bushing Assembly (.040" Oversize) 2 8P-5429

Shaft 1 4M-0578

End Collar 2 8S-0009

Bolt 12 0S-1587

Washer 12 3H-7654

Ring 2 4S-8072

Pin 1 1T-0068






Plug 1 2P-0347

Mounting Hardware 3

Bolt 4 1D-4640

Washer 4 3K-5234

Special Application Groups/Seals (Low/High Temperature)

Double Flange (DF) 8 1 7G-8807

Single Flange (SF) 6 1 7G-8808



Seal -- Bushing O-Ring 2 9N-2693

Seal -- Shaft O-Ring 2 6L-9965

1 594 Pipelayers require 10 double flange rollers and 6 single flange rollers.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 These components are not included in the roller group; quantities shown are required to mount each roller.

423


D9, 594 TRACK ROLLERS7/8" MOUNTING HARDWARE

62H1-48, 66A1-66A5854


NUMBER

Double Flange (DF) 8 1 7G-2763

Single Flange (SF) 8 1 7G-2762

Components of Group




Bearing 2 1 8P-5430

Bushing Assembly (.040" Oversize) 2 8P-5429

Shaft 1 4M-0578


Bolt 12 0S-1587

Washer 12 3H-7654

Ring 2 4S-8072

Pin 1 1T-0068






Plug 1 2P-0347

Mounting Hardware 3

Bolt 4 1D-4630

Washer 4 9H-1031




Seal -- Bushing O-Ring 2 9N-2693

Seal -- Shaft O-Ring 2 6L-9965

1 594 Pipelayers require 10 double flange rollers and 6 single flange rollers.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 These components are not included in the roller group; quantities shown are required to mount each roller.

424


D9, 594 END GUIDING GUARDS12U, 29N, 30N, 62H, 66A, 90J, 90V, 91J, 96V, 97V, 98V, 99V


NUMBER



Wear Strip 1 9M-6744

Bolt 4 1D-4625 1





Bolt 4 1D-4625 1


Rear (Outer RH)



Bolt 4 1D-4625 1


Rear (Outer LH)



Bolt 4 1D-4625 1


1 1D4626 bolt required with 594 Pipelayer.


66A5853-UP, 90J, 91J


NUMBER

Guard Assembly

Inner RH 1 7S-8011

Inner LH 1 7S-8012

Outer RH 1 7S-8013

Outer LH 1 7S-8013

D9 FINAL DRIVE GUARDS66A, 90J, 91J, 29N, 30N, 90V, 97V, 98V, 99V, 12U


NUMBER

Guard 2 7S-7975

Bolt 12 1S-0454


425

Track-Type LoadersINDEX

Track-Type LoadersMODELS PAGE NO.

935C, 935B, 933C, 933, 931C, 931B, 931 426..............................................................939C, 939 440................................................................................................................941 450..........................................................................................................................943 460..........................................................................................................................951 468..........................................................................................................................953D, 953C, 953B, 953 475...........................................................................................955 495..........................................................................................................................963D, 963C, 963B, 963 514...........................................................................................973C, 973 534................................................................................................................977 553..........................................................................................................................983 572..........................................................................................................................

426

Track-Type Loaders935C, 935B, 933C, 933, 931C, 931B, 931

935C/B, 931C/B, 931, 933C, 931 SEALED AND LUBRICATED TRACKLARGE STEPPED BUSHING

36 & 37 SECTIONS 935C/B, 931B/C, 93139 SECTION 933C, 933

6.125" (155.6 mm) PITCH - 9/16" BOLT

PART NUMBER 36 Section 37 Section 39 Section


Track Links





RH Regular 6Y-0935 35 36 38

LH Regular 6Y-0936 35 36 38

Other Components

Pin 154-3660 4 36 37 39

Bushing 188-6246 36 37 39


Thrust Ring 6S-9049 72 74 78

Stopper 5G-2247 36 37 39

Plug 6Y-0473 36 37 39

Track Hardware 5

Bolt (Grouser Shoe) 4K-7038 140 144 152

Bolt (Self-Cleaning Shoe) 4K-7038 70 72 76

Bolt (Self-Cleaning Shoe) 5A-3187 70 72 76

Nut 7K-2017 140 144 152

Master Bolt (Grouser Shoe) 5A-3187 4 4 4

Master Bolt (Self-Cleaning Shoe) 5A-3187 2 2 2

Master Bolt (Self-Cleaning Shoe) 5P-4683 2 2 2

Special Sets/Groups


1 Service replaced by 323-87582 Service replaced by 323-87593 Service replaced by 323-87574 Service replaced by 303-9455.5 Not part of link assembly, required to assemble track group.

427


935C/B, 933C,933, 931C/B, 931 SEALED AND LUBRICATED TRACKJAPAN USE ONLY

STEPPED BUSHING935C/B, 931C/B, 931: (36 & 37 SECTIONS)

933C,933: (39 SECTION 4MS1-UP, 5JS1-UP, 8FL1-UP, 9EL1-UP6.125" (155.6 mm) PITCH - 9/16" BOLT

PART NUMBER 36 Section 37 Section 39 Section

Link Assembly -- 39 Section 154-3645 154-3644 1 154-3646 2

Track Links





RH Regular 6Y-0935 35 36 38

LH Regular 6Y-0936 35 36 38

Other Components

Pin 154-3660 36 37 39

Bushing 111-1522 36 37 39


Thrust Ring 6S-9049 72 74 78

Stopper 5G-2247 36 37 39

Plug 6Y-0473 36 37 39

Track Hardware 3

Bolt 4K-7038 140 144 152

Nut 7K-2017 140 144 152

Master Bolt 5A-3187 4 4 4

Special Sets/Groups


Seal Set (78 Seal Assemblies) 252-7861 1

1 Service replaced by (1) - 205-8267 and (5)- 190-7396 sprocket segments.2 Service replaced by (1) - 188-8764 and (5) - 190-7396 sprocket segments.3 Not part of link assembly; required to assemble track group.4 Must order (5) 190-7396 sprocket segments to be used with the 206-3128 Bushing and Seal Gp. This group contains the large steppedbushing 54 mm diameter.

428


935C, 935B, 933, 931C, 931B, 931 SEALED TRACKSTEPPED BUSHING

933(39 SECTION): 8FL1-UP, 9EL1-UP6.125" (155.6 mm) PITCH - 9/16" BOLT

PARTNUMBER 36 SECTION 37 SECTION 39 SECTION

Link Assembly -- (Quantity 2) 6Y-1711 -- 1 6Y-1713 2

Track Links





RH Regular 6Y-0935 35 36 38

LH Regular 6Y-0936 35 36 38

Other Components

Pin 6B-5278 36 37 39

Bushing 6Y-1717 36 37 39

Seal 6S-3146 144 148 156

Track Hardware 3

Bolt 4K-7038 140 144 152

Nut 7K-2017 140 144 152

Master Bolt 5A-3187 4 4 4

1 Order 36 Section 6Y-1711 or 39 Section 6Y-1713 Link Assembly and add or remove appropriate number of sections.2 Early 933 traxcavator (11A, 25A, 42A) used 6.75" (171.5 mm) pitch track; refer to parts book for details.3 Not part of link assembly; required to assemble track group.

429


935C, 935B, 931C, 931B, 931 SEALED AND LUBRICATED TRACKSTRAIGHT WALL BUSHING, SPLIT MASTER

6.125" (155.6 mm) PITCH -- 9/16" BOLT



Track Links







Other Components

Pin 36 154-3660

Bushing 36 6S-9051



Stopper 36 5G-2247

Plug 36 6Y-0473

Track Hardware 2

Bolt 140 4K-7038

Nut 140 7K-2017


Special Sets/Groups


1 If 36 or 37 section link assemblies are required, upgrade to link assemblies using "6Y" track links. This will require ordering new shoesto be used with "6Y" track links.2 Not part of link assembly; required to assemble track group.

430


935C, 935B, 931C, 931B, 931 SEALED TRACKSTRAIGHT WALL BUSHING, SPLIT MASTER, SHORT UNDERCARRIAGE

6.125" (155.6 mm) PITCH -- 9/16" BOLT



Track Links







Other Components

Pin 36 6B-5278

Bushing 36 6S-3178

Seal 144 6S-3146

Track Hardware 2

Bolt 140 4K-7038

Nut 140 7K-2017


1 Upgrade by ordering 36 section 6Y-1711 or 39 section 6Y-1713 link assembly and add or subtract appropriate number of sections. Thiswill require ordering new shoes to be used with "6Y" track links.2 Not part of link assembly; required to assemble track group.

431


935C, 935B, 931C, 931B, 931 SEALED TRACKSTRAIGHT WALL BUSHING, SHORT UNDERCARRIAGE

6.125" (155.6 mm) PITCH -- 9/16" BOLT



Track Links





Other Components

Pin 35 6B-5278


Bushing 35 6S-3178


Seal 144 6S-3146

Spacer 2 6S-3145

Track Hardware 2

Bolt 144 4K-7038

Nut 144 7K-2017

1 Upgrade by ordering 36 section 6Y-1711 or 39 section 6Y-1713 link assembly and add or subtract appropriate number of sections. Thiswill require ordering new shoes to be used with "6Y" track links.2 Not part of link assembly; required to assemble track group.

432


931 SEALED TRACK6.125" (155.6 mm) PITCH -- 1/2" BOLT


Link Assembly (36 Section) 2 6S-3142

Track Links





Other Components

Pin 35 6B-5278


Bushing 35 6S-3178


Seal 144 6S-3146

Spacer 2 6S-3145

Track Hardware 1

Bolt 144 8H-7504

Nut 144 6S-3419


935C, 935B, 933C, 933, 931C, 931B, 931 TRACK SHOES 1

FOR USE WITH 6Y-0935/6Y-0936 TRACK LINKS9/16" BOLT

TYPE WIDTH

REGULARSHOE PART

NUMBERMASTER SHOEPART NUMBER

Single Grouser - Moderate Service 2 14.0" (355 mm) 6Y-1328 6Y-1329




Double Grouser 14.0" (355 mm) 9N-4174 9N-4175

Double Grouser 25.0" (635 mm) 6Y-1589 6Y-1590

Triple Grouser 14.0" (355 mm) 6Y-1596 6Y-1597

Triple Grouser (Rubber Bonded) 14.0" (355 mm) 9N-4328 9N-4327

Self Cleaning 25.0" (635 mm) 6S-9115 6S-9102

1 933 serial numbers (9EL1-UP and 8FL1-UP) only. Early 933 traxcavators (11A,25A,42A) used 6.75" (171.5 mm) pitch track; Refer to partsbook for details2 Increased overlap shoe profile; for use with 6Y track links only.

433


935C, 931C TRACK SHOES 1

STRAIGHT WALL BUSHING, SPLIT MASTER, FOR USE WITH 6S-8343/6S-8344 TRACK LINKS9/16" BOLT

TYPE WIDTH

REGULARSHOE PART


Single Grouser - Moderate Service 12.0" (305 mm) 6S-8814 6S-7123

Single Grouser - Moderate Service 14.0" (355 mm) 6S-8815 6S-9057

Single Grouser - Moderate Service 16.0" (405 mm) 9W-4334 9W-4335

Triple Grouser 12.0" (305 mm) 6S-8823 6S-7124


1 Includes 935B, 931B and 931 model machines.

931 TRACK SHOES1/2" BOLT


Single Grouser - Moderate Service 16.0" (405 mm) 6S-3422

Triple Grouser 14.0" (355 mm) 6S-3149

935C, 933C, 931C SPROCKETS 1

SEGMENT DESIGN

(PER SIDE) QUANTITY PART NUMBER

Sprocket Hub 1 8Y-6559

Sprocket Segment (5 Tooth) (Tough Steel) 5 190-7396

Adapter Ring (Weld-On) 1 6Y-5499

Bolt 25 9W-9265

Nut 25 8H-5724

Washer 25 5P-8245

1 Includes 935B, 931B and 931 model machines. Note:933 serial numbers (9EL1-UP and 8FL1-UP) only. Early 933 traxcavators(11A,25A,42A) used 6.75" (171.5 mm) pitch track; Refer to parts book for details

935C, 933C, 931C SPROCKETS 1

ONE PIECE DESIGN


Sprocket Assembly (25 Tooth) 1 8Y-0622

Rim (Weld-On Sprocket) (25 Tooth) 1 6Y-1244

1 Includes 935B, 931B and 931 model machines. Note:933 serial numbers (9EL1-UP and 8FL1-UP) only. Early 933 traxcavators(11A,25A,42A) used 6.75" (171.5 mm) pitch track; Refer to parts book for details

434


935C, 933C, 931C IDLERS 1


PART NUMBERPART

NUMBER

Idler Group 2 -- -- 2

Components of Group

Idler Assembly 1 8E-7342 106-9187

Idler Shell 1 -- 9N-4173

Bearing (Sleeve) 3 2 6Y-4744 --

Bushing Assembly 3 2 -- 6S-3495

Bearing 4 1 -- 6Y-4744

Shaft 1 8E-7343 6S-3697

Washer Thrust 2 6Y-2110 6S-7715

Bearing Block 1 8Y-1697 6S-3451

Bearing Block 1 8Y-1698 6S-3453

Seal -- Duo-Cone Group 2 1M-8746 1M-8746

Toric Ring 4 2 8H-2265 6S-3284

Shaft O-Ring 2 1H-9696 1H-9696

Plate Assembly 4 6S-7220 6S-7220

Bolt 8 5P-2566 5P-2566

Washer 8 7X-0584 7X-0584

Lock 2 5M-5000 5M-5000

Bolt 4 8C-6877 8C-6877

Washer 4 7X-0618 7X-0618

Stopper 1 7G-4332 --

Plug 1 6Y-0473 9F-2247


Seal -- Duo-Cone Group 2 8S-5656 5P-0373

Toric Ring 4 2 8S-5653 3N-3095

1 Includes 935B, 931B and 931 model machines. Note:933 serial numbers (9EL1-UP and 8FL1-UP) only. Early 933 traxcavators(11A,25A,42A) used 6.75" (171.5 mm) pitch track; Refer to parts book for details2 Order either 164-1047 or 185-4037 idler groups3 Component of Idler Assembly.4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

435


935C, 933C, 931C CARRIER ROLLERS 1

(PER MACHINE) QUANTITY PART NUMBER

Group 2 6S-3609

Components of Group


Shaft 1 6K-9861

Cup 2 1M-8736

Cone 2 1M-8735

Ring 1 1M-7914

Cover 1 4H-9527


Bolt 5 0L-1351

Washer 5 3B-4506



Cover 1 4H-9628

Shaft O-Ring 1 1H-9696

Plate 1 6K-9860

Bolt 2 6V-4791




1 Includes 935B, 931B and 931 model machines. Note:933 serial numbers (9EL1-UP and 8FL1-UP) only. Early 933 traxcavators(11A,25A,42A) used 6.75" (171.5 mm) pitch track; Refer to parts book for details2 Component of preceding group; quantity shown is the quantity per group.

436


935C, 933C, 931C TRACK ROLLERS 1




Components of Group




Bearing 5 1 6Y-4744

Shaft 1 6S-3171




Toric Ring 5 2 216-2956

Shaft O-Ring 2 7D-9749

Plug 1 9F-2247

Mounting Hardware 6

Bolt 4 0S-1585

Washer 4 2M-0849




1 Includes 935B, 931B and 931 model machines. Note:933 serial numbers (9EL1-UP and 8FL1-UP) only. Early 933 traxcavators(11A,25A,42A) used 6.75" (171.5 mm) pitch track; Refer to parts book for details2 Serviced Replaced By: 1 - Roller Group (DF) 281-8338, 4 - Bolt 0S-1585, 4 - Washer 2W-0849.3 933C Requires 8 Single Flange Roller Gps4 Serviced Replaced By: 1 - Roller Group (SF) 281-8339, 4 - Bolt 0S-1585, 4 - Washer 2W-0849.5 Component of preceding assembly or group; quantity shown is quantity per assembly or group.6 These components are not included in the roller group; quantities shown are required to mount each roller.

437


933C TRACK GUIDING GUARDS (REAR SPROCKET)






Bolt 16 7X-0351

Washer 16 8T-4122



Bolt 8 5C-6565

Washer 8 5P-1076



Bolt 6 5S-7379

Washer 6 5P-1075

Guard 2 128-9555

Bolt 2 4L-6454

Washer 2 5P-1075

Bolt 4 7X-0288

Washer 4 5P-1075

Spacer 4 130-1433

933C TRACK ROLLER GUARDS (FULL LENGTH)USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)




Bolt 16 8T-8917

Nut 16 8T-4223


Bolt 4 4L-6454

Washer 4 8T-4896

Plate (Rear) 4 138-1946

Plate (Rear) 4 138-1945

Bolt 8 8T-8917

Washer 8 8T-4223

Pipe 8 8Y-1009

Bolt 8 6M-9613

Nut 16 8T-4223

438


935C, 935B, 931C, 931B SPROCKET/IDLER TRACK FRAME GUARDS 1









Bracket 2 6S-6741

Bolt 34 5S-7379

Bolt 6 8T-8917

Washer 34 5P-1075

Washer 6 8T-4223

1 This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose ofthis package is to shed material and prevent its entry into the undercarriage system (link box area)2 Guard (LH) 103-8835 serviced by (1) 139-5740 Guard Assembly and (1) 8Y6660 Tab Assembly.3 Guard (LH) 103-8838 serviced by (1) 139-5739 Guard Assembly and (1) 8Y6660 Tab Assembly.

933 SPROCKET/IDLER TRACK FRAME GUARDS 1

STD









Bracket 2 6S-6741

Bolt 34 5S-7379

Bolt 6 8T-8917

Washer 34 5P-1075

Washer 6 8T-4223

1 This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose ofthis package is to shed material and prevent its entry into the undercarriage system (link box area)2 Guard (LH) 103-8836 serviced by (1) 139-5742 Guard Assembly and (1) 8Y6660 Tab Assembly.3 Guard (LH) 103-8837 serviced by (1) 139-5741 Guard Assembly and (1) 8Y6660 Tab Assembly.

439


933 SPROCKET/IDLER TRACK FRAME GUARDS 1

LGP


Roller Frame Guard (RH) 1 104-4129

Roller Frame Guard (LH) 1 104-4130






Bracket 2 6S-6741

Bolt 34 5S-7379

Bolt 6 8T-8917

Washer 34 5P-1075

Washer 6 8T-4223

1 This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose ofthis package is to shed material and prevent its entry into the undercarriage system (link box area)

935C, 933C, 933, 931C IDLER ROCK GUARDS (WITHOUT COUNTER WEIGHT)




440

Track-Type Loaders939C, 939

939C, 939 SEALED AND LUBRICATED TRACKLARGE STEPPED BUSHING

6DS, 9GL6.75" (171.5 mm) PITCH -- 5/8" BOLT




Track Links







Other Components

Pin 37 160-7816 1

Bushing 37 224-3959



Stopper 37 5G-2247

Plug 37 6Y-0473

Track Hardware 2

Bolt 144 9G-3110

Nut 144 1M-1408



Special Sets/Groups



1 Former pin 6Y-9260 (use 9G-1642 stopper).2 Not part of link assembly; required to assemble track group

441


939C, 939 SEALED AND LUBRICATED TRACK6DS, 9GL

6.75" (171.5 mm) PITCH -- 5/8" BOLT




Track Links







Other Components

Pin 37 160-7816 2

Bushing 37 9G-8588



Stopper 37 5G-2247

Plug 37 6Y-0473

Track Hardware 3

Bolt 144 9G-3110

Nut 144 1M-1408



Special Sets/Groups


Bushing and Seal Group (39 Sections) 1 -- 4

1 Serviced replaced by (1) 227-9960 link assembly, (2) 197-9677 sprocket segments, and (3) 197-9678 sprocket segments.2 Former pin 6Y-9260 (use 9G-1642 stopper).3 Not part of link assembly; required to assemble track group4 Order (1) 227-9954 Seal and Bushing Group, (2) 197-9677 Sprocket Segments, and (3) 197-9678 Sprocket Segments.

442


939C, 939 ROTATING BUSHING TRACK 1

6.75" (171.5 mm) PITCH -- 5/8" BOLT




Track Links





RH Regular 3 36 109-0486

LH Regular 3 36 109-0487

Other Components

Pin 37 152-8075

Bushing 37 109-0478



Stopper 37 5G-2247

Plug 37 6Y-0473

Track Hardware 4

Bolt 144 9G-3110

Nut 144 1M-1408



1 Rotating Bushing Track is an application specific undercarriage, designed for high abrasion/low impact applications (4000 hour systemlife or less). When installing Rotating Bushing Track on existing machines, refer to IRM UC98-19 for adaptability, installation andguarding information2 Serviced replaced by 227-9960 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.3 Contains link and insert. Insert is not serviced.4 Not part of the link assembly; required to assemble track group.

939C, 939 TRACK SHOES


Single Grouser - Moderate Service 18.0" (460 mm) 3T-0360

Double Grouser 16.0" (405 mm) 102-3585


939C SPROCKETS


Sprocket Hub 1 112-8980



Bolt 23 6V-0937

443


939 SPROCKETS


Sprocket Hub 1 118-3539



Bolt 23 6V-0937

Nut 23 7H-3607

Washer 23 2S-5658

939C, 939 SPROCKETSROTATING BUSHING TRACK




Bolt 23 6V-0937

Nut 1 23 7H-3607

Washer 1 23 2S-5658


444


939C, 939 IDLERS


Idler Group 2 -- 1

Components of Groups

Idler Assembly 1 9U-9065


Bushing 2 1 7K-1089

Shaft 1 8E-7899





Bolt 12 9B-7237

Washer 12 8T-4896

Stopper 1 7G-4332

Plug 1 6Y-0473

Lock 2 5M-5000

Bolt 2 8C-6877

Washer 2 7X-0618




1 Order 185-4038 idler group.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

445


939C, 939 CARRIER ROLLERS


Group 2 6K-9880

Components of Group


Shaft 1 6K-9861

Cup 2 1M-8736

Cone 2 1M-8735

Ring 1 1M-7914

Cover 1 3K-6638


Plug 1 2P-0347

Bolt 3 0L-1351

Washer 3 5M-2894

Plate 1 6K-9860

Bolt 2 6V-4791









1 Component of preceding group; quantity shown is the quantity per group

446


939C, 939 TRACK ROLLERSCURRENT DESIGN (END COLLARS, SYMMETRIC SEALS)

9GL0496-UP




Tall Flange Double (TFD) - 1 124-8243

Components of Group





Shaft 1 131-7239


Ring 2 6H-7382






Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 4

Bolt 4 1A-8537

Washer 4 5P-8247






1 Optional DF Roller for guiding; use required for specific roller frame type.2 Serviced Replaced By: 9W-5224.3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.4 These components are not included in the roller group; quantities shown are required to mount each roller.

447


939 TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER)


PART NUMBER

Double Flange (DF) 4 -- 1

Single Flange (SF) 8 -- 2

Components of Group



Bearing 3 2 8P-7002

Shaft 1 8E-6573


Thrust Ring 5 1 9G-9351

Dowel 5 4 1L-5072

Bolt 12 0S-1594

Washer 12 5M-2894




O-Ring 3 1 6V-2699


Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 6

End Cap 2 7G-4829

Bolt 4 1B-4367

Washer 4 5P-8247




O-Ring 3 1 6V-2699

1 Upgrade to 124-8240 roller group.2 Upgrade to 124-8237 roller group.3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.4 Service Replaced by 237-8201.5 These components are only to repair retainer assembly. See Special Instruction SEHS8515.6 These components are not included in the roller group; quantities shown are required to mount each roller.

939C END GUIDING GUARDS





448


939 END GUIDING GUARDSFORMER MODEL



Right Outer, Left Inner 2 8Y-8908

Left Outer, Right Inner 2 8Y-8909




939C TRACK GUIDING GUARDS (REAR SPROCKET)






Bolt 16 7X-0353

Washer 16 8T-4122



Bolt 8 5C-6565

Washer 8 5P-1076



Bolt 4 5S-7379

Washer 4 5P-1075

Guard 2 132-3861

Bolt 6 4L-6454

Washer 6 5P-1075

449


939C, 939 TRACK ROLLER GUARDS (WITH SPROCKET GUARD)CURRENT MODEL (FULL LENGTH)




Pipe 8 8Y-7125

Bolt 16 8T-8917

Bolt 8 8S-3887

Bolt 4 4L-6454

Washer 4 8T-4896

Washer 24 8T-4223

Nut 3 6V-8188

Tab 4 8Y-3413

Plate 4 138-1945

Plate 4 138-1946

Bolt 8 8T-8919

Washer 8 5P-8245

939 TRACK ROLLER GUARDS (WITHOUT SPROCKET GUARD)FORMER MODEL (FULL LENGTH)




Pipe 10 8Y-7125

Bolt 20 8T-8917

Bolt 10 8S-3887

Bolt 8 4L-6454

Washer 8 8T-4896

Washer 30 8T-4223

Nut 10 6V-8188

Tab 8 8Y-3413

939C IDLER ROCK GUARDS (WITHOUT COUNTER WEIGHT)




450

Track-Type Loaders941

941 SEALED AND LUBRICATED TRACK16U, 70H, 75H, 80H

6.75" (171.5 mm) PITCH -- 5/8" BOLT



Track Links







Other Components

Pin 38 154-3664 1

Bushing (Stepped) 38 7T-4628



Stopper 38 5G-2247

Plug 38 6Y-0473

Track Hardware 2

Bolt 148 7H-3597

Nut 148 1M-1408


Special Sets/Groups



1 Former pin 9K-8550 (use 9G-1642 stopper)2 Not part of link assembly; required to assemble track group.

451


941 SEALED TRACK16U, 70H, 75H, 80H

6.75" (171.5 mm) PITCH -- 5/8" BOLT


Link Assembly -- 38 Section 2 1V-7074

Track Links







Other Components

Pin 38 9K-4060

Bushing 38 9K-4061

Seal 152 7K-2018

Track Hardware 1

Bolt 148 7H-3597

Nut 148 1M-1408


Special Sets/Groups



452


941 FORMER SEALED TRACK16U, 70H, 75H, 80H

6.75" (171.5 mm) PITCH -- 5/8" BOLT



Track Links

RH Master (Full) 1 9K-0029

LH Master (Full) 1 9K-0028



Other Components

Pin 37 9K-4060


Bushing 37 9K-4061


Seal 152 7K-2018

Spacer 2 9K-4059

Track Hardware 2

Bolt 152 7H-3597

Nut 152 1M-1408

Special Sets/Groups


1 Upgrade to 1V-7074 Link Assembly2 Not part of link assembly; required to assemble track group.

453


941 TRACKLARGE O.D. BUSHING

16U, 70H, 75H, 80H6.75" (171.5 mm) PITCH -- 9/16" BOLT

QUANTITYFORMER

PART NUMBER

Link Assembly -- 38 Section 2 7K-2051

Track Links



Other Components

Pin 37 4B-6166


Bushing 37 7K-2019



Spacer 2 7K-2016

Track Hardware 1

Bolt 152 4K-7038

Nut 152 7K-2017


941 TRACKSMALL O.D. BUSHING

16U, 70H, 75H, 80H6.75" (171.5 mm) PITCH -- 9/16" BOLT

QUANTITYFORMER

PART NUMBER


Track Links



Other Components

Pin 37 4B-6166


Bushing 37 4K-3918



Spacer 2 4K-3916

Track Hardware 2

Bolt 152 4K-7038

Nut 152 7K-2017

1 Upgrade to 7K-2051 Link Assembly.2 Not part of link assembly; required to assemble track group.

454



TYPE WIDTH

REGULARSHOE PART


Single Grouser - Moderate Service 13.0" (330 mm) 206-3507 206-3515









941 SPROCKETS



Rim (29 Tooth) 1 4V-4107

455


941 IDLERSSTRAIGHT SHAFT, 9K BLOCKS



Other Components


Bearing 1 1 7K-1089

Shaft 1 8E-7899







Bolt 12 1A-2029

Washer 12 3B-4506

Plug 1 6Y-0473

Stopper 1 7G-4332

Lock 1 5M-5000

Bolt 1 0T-0772

Washer 1 4K-9943





456


941 IDLERSSTEPPED SHAFT, 4K BLOCKS


PART NUMBER


Other Components


Bearing 1 1 7K-1089

Shaft 1 4K-9984







Plug 1 1S-8947

Bolt 12 0S-1588

Washer 12 3B-4506

Plug 1 2P-0347

Lock 1 5M-5000

Bolt 1 0T-0772

Washer 1 4K-9943





457


941 CARRIER ROLLERS


Group 2 6K-9880

Components of Group


Shaft 1 6K-9861

Cup 2 1M-8736

Cone 2 1M-8735

Ring 1 1M-7914

Cover 1 3K-6638


Plug 1 2P-0347

Bolt 3 0L-1351

Washer 3 5M-2894

Plate 1 6K-9860

Bolt 2 6V-4791










458


941 TRACK ROLLERS




Components of Group




Bearing 1 1 7K-1089

Shaft 1 118-1610 2

End Collar 2 118-1616 3

Retaining Ring 2 6H-7382

Bolt 12 2P-3201





Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 4

Bolt 4 1A-1135

Washer 4 5P-8247




Bushing O-Ring 2 5K-1770

Shaft O-Ring 2 8M-5661

1 Component of preceding assembly or group; quantity shown is per assembly or group.2 Replaces former 3K-6616 shaft; requires 2 -- 118-1616 end collars.3 If 3K-6616 shaft is used, use 2 -- 5K-7187 end collars.4 These components are not included in the roller group; quantities shown are required to mount each roller.

459







Bolt 4 031-0221




Bolt 4 031-0221

Rear (Outer RH)



Bolt 4 031-0221

Rear (Outer LH)



Bolt 4 031-0221

941 CENTER GUIDING GUARDS



Bolt 16 031-0221

Washer 8 4D-3704

Bar 4 7V-3687

Spacer 8 9M-7783

Bolt 8 6K-0137

460


943 TRACKLARGE O.D. BUSHING, HIGH RAIL LINK

19Z, 3Y, 31Y, 4Z6.75" (171.5 mm) PITCH -- 5/8" BOLT




Track Links







Other Components

Pin 38 154-3664 1

Bushing 38 7T-4628



Stopper 38 5G-2247

Plug 38 6Y-0473

Track Hardware 2

Bolt 148 7H-3597

Nut 148 1M-1408


Special Sets/Groups



1 Former pin 9K-8550 (Use 9G-1643 stopper).2 Not part of link assembly; required to assemble track group

461


943 TRACKD4E TRACK LINKS

19Z, 3Y, 31Y, 4Z6.75" (171.5 mm) PITCH -- 5/8" BOLT


PART NUMBER



Track Links







Other Components

Pin 38 154-3664 1

Bushing 38 7T-4628



Stopper 38 5G-2247

Plug 38 6Y-0473

Track Hardware 2

Bolt 148 7H-3597

Nut 148 1M-1408


Special Sets/Groups



1 Former pin 9K-8550 (use 9G-1642 stopper).2 Not part of link assembly; required to assemble track group


TYPE WIDTH

REGULARSHOE PART




Double Grouser (LGP) 18.0" (460 mm) 8E-4799 8E-4800


1 Double Grouser Master.

462


943 SPROCKETS


Sprocket Segment (5 Tooth) 5 6Y-5661

Bolt 20 3S-8182

Nut 20 7H-3607

943 IDLERS



Other Components


Bearing 1 1 7K-1089

Shaft 1 8E-7899





Bolt 12 9B-7237

Washer 12 8T-4896

Stopper 1 7G-4332

Plug 1 6Y-0473

Lock 2 5M-5000

Bolt 2 8C-6877

Washer 2 7X-0563

Swing Link 1 8G-3170

Swing Link 1 8G-3172





463


943 CARRIER ROLLERS


Group 2 6K-9880

Components of Group


Shaft 1 6K-9861

Cup 2 1M-8736

Cone 2 1M-8735

Ring 1 1M-7914

Cover 1 3K-6638


Plug 1 2P-0347

Bolt 3 0L-1351

Washer 3 5M-2894

Plate 1 6K-9860

Bolt 2 6V-4791










464


943 TRACK ROLLERS 1

CURRENT MODEL (END COLLARS SYMMETRIC SEALS)




Tall Flange Double (TFD) - 2 124-8243

Components of Group





Shaft 1 131-7239


Ring 2 6H-7382






Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 4

Bolt 4 1A-8537

Washer 4 5P-8247






1 For use with high rail 7T4173/74 links.2 Optional DF Roller for guiding; use quantity required for specific roller frame type.3 Component of preceding assembly or group; quantity shown is per assembly or group.4 These components are not included in the roller group; quantities shown are required to mount each roller.

465


943 TRACK ROLLERS 1

FORMER MODEL (BOLT-ON RETAINER)




Components of Group



Bearing 2 2 8P-7002

Shaft 1 8E-6573


Thrust Ring 4 1 9G-9351

Dowel 4 4 1L-5072

Bolt 12 0S-1594

Washer 12 5M-2894




O-Ring 2 1 6V-2699

Retainer 2 1H-6227

Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 5

End Cap 2 7G-4829

Bolt 4 1B-4367

Washer 4 5P-8247




O-Ring 2 1 6V-2699

1 For use with high rail 7T4173/74 links.2 Component of preceding assembly or group; quantity shown is per assembly or group.3 Service Replaced by 237-8201.4 These components are only to repair retainer assembly. See Special Instruction SEHS8515.5 These components are not included in the roller group; quantities shown are required to mount each roller.

466


943 TRACK ROLLERS 1

EARLY MODEL




Components of Group




Bearing 2 1 7K-1089

Shaft 1 118-1610 3

End Collar 2 118-1616 4

Ring 2 6H-7382

Bolt 12 2P-3201





Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 5

Bolt 4 1A-1135

Washer 4 5P-8247






1 For use with 9K-6628 and 9K-6629 links.2 Component of preceding assembly or group; quantity shown is per assembly or group.3 Replaces former 3K-6616 shaft; requires 2 -- 118-1616 end collars.4 If 3K-6616 shaft is used, use 2 -- 5K-7187 end collars.5 These components are not included in the roller group; quantities shown are required to mount each roller.

467





Right Outer, Left Inner 1 3W-8410

Left Outer, Right Inner 1 3W-8407

Wear Strip 2 7P-7208

Bolt 8 5P-2228


Right Outer, Left Inner 1 8G-6781

Left Outer, Right Inner 1 8G-6792

Wear Strip 2 8G-6793

Bolt 10 5P-2228

468


951 SEALED AND LUBRICATED TRACK15F, 19H, 32F, 44Z, 69H1869-UP, 72J, 78Y, 79H, 86J1992-UP

6.91" (175.5 mm) PITCH -- 5/8" BOLT



Track Links







Other Components

Pin 39 160-7818 1

Bushing 39 7T-4636



Stopper 39 5G-2247

Plug 39 6Y-0473

Track Hardware 2

Bolt 152 7H-3597

Nut 152 1M-1408


Special Sets/Groups



1 Former pin 3P-3880 (use 9G-1642 stopper).2 Not part of the link assembly; required to assemble track group.

469


951 SEALED TRACK15F, 19H, 32F, 44Z, 69H1869-UP, 72J, 78Y, 79H, 86J1992-UP

6.91" (175.5 mm) PITCH -- 5/8" BOLT


Link Assembly -- 39 Section 2 3P-5757

Track Links







Other Components

Pin 39 6B-5502

Bushing 39 5S-0710

Seal 156 5S-0709

Track Hardware 1

Bolt 152 7H-3597

Nut 152 1M-1408


Special Sets/Groups


1 Not part of the link assembly; required to assemble track group.

470


951 EXTENDED WEAR LIFE TRACK15F, 19H, 32F, 44Z, 69H1869-UP, 72J, 78Y, 79H, 86J1992-UP

6.91" (175.5 mm) PITCH -- 5/8" BOLT



Track Links







Other Components

Pin 39 160-7818 2

Bushing 39 7T-4636



Stopper 39 5G-2247

Plug 39 6Y-0473

Track Hardware 3

Bolt 152 7H-3597

Nut 152 1M-1408


Special Sets/Groups



1 Note: Extended wear life link assemblies require special rollers and idlers to match the high rail link; Refer to roller and idler section fordetails.2 Former pin 3P-3880 (use 9G-1642 stopper).3 Not part of link assembly; required to assemble track group.


TYPE WIDTH

REGULARSHOE PART


Single Grouser - Moderate Service 15.0" (380 mm) 9K-3028 4V-7410

Single Grouser - Moderate Service 16.0" (405 mm) 5S-0820 3P-3888





Triple Grouser (Center Punched Slots) 13.7" (348 mm) 9G-6389 8E-4728 1


Triple Grouser (Center Punched Slots) 15.0" (380 mm) 6K-1910 8E-4725 1


471


951 SPROCKETS86J1992-UP

6.91" (175.5 mm) PITCH



Rim (30 Tooth) 1 4V-5376

951 IDLERS



Extended Wear Assembly 1 2 7T-3501

Other Components


Bearing 2 1 8P-6652

Shaft 1 5K-0305

Bearing Block (Out RH, In LH) 1 9G-8301

Bearing Block (Out LH, In RH) 1 9G-8300





Bolt 12 0S-1588

Washer 12 3B-4506

Plug 1 2P-0347




Bushing O-Ring 2 2S-2182


1 For use with Extended Wear Life Track.2 Component of preceding assembly or group; quantity shown is per assembly or group.

472


951 CARRIER ROLLERS


PART NUMBERPART

NUMBER

Group 4 -- 1 5A-8374

Components of Group

Roller Shell 1 2S-0205 5A-8375

Shaft 1 5M-1914 3T-3207

Cup 2 1M-7911 9S-3581

Cone 2 1M-7912 9S-3582

Ring 1 1M-7914 1M-7914

Cover 1 5M-2043 5M-2043

Collar 1 1M-7918 9S-3567


Plug 1 2P-0347 2P-0347

Bolt 3 0S-1594 0S-1594


Toric Ring 2 2 1M-3097 8H-2262

Seal -- Cover 1 2H-6338 2H-6338


Seal -- Plug 1 1S-8947 1S-8947


Ring 1 1M-7916 --

Nut 1 1M-7913 --

Plate 1 -- 8P-6188

Bolt 2 -- 5K-9107



Toric Ring 3 2 2S-2181 9M-9730

1 Upgrade to 5A-7384 group.2 Component of preceding group; quantity shown is the quantity per group.3 Component of preceding assembly or group; quantity shown is per assembly or group.

473


951 TRACK ROLLERS




Components of Group






Bearing 5 1 8P-6652

Shaft 1 118-1613 6


Ring 2 6H-7382

Bolt 12 2P-3201





Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 8

Bolt 4 8S-9092

Washer 4 5P-8247






1 6 - DF and 4 - SF rollers required for early 951 machines (15F, 79H, 78J, and 86J1-785).2 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.3 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.4 For use with Extended Wear Life Track.5 Component of preceding assembly or group; quantity shown is per assembly or group.6 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Serviced Replaced By:1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.7 If 5M-1915 shaft is used, use 1 -- 5M-0627 and 1 -- 1M-3812 end collar.8 These components are not included in the roller group; quantities shown are required to mount each roller.

474


951 END GUIDING GUARDS 1




Wear Strip 1 7K-3703

Bolt 4 5K-8454




Bolt 4 5K-8454

Rear (Outer RH)



Bolt 4 5K-8454

Rear (Outer LH)



Bolt 4 5K-8454

1 These end guiding guards can be used on 951B's with 6.91" pitch and 6.75" pitch.

475

Track-Type Loaders953D, 953C, 953B, 953

953D/C/B SystemOne TRACKPress Fit Master

7.50" (190.5 mm) PITCH 20 mm BOLT








Track Hardware 3

Bolt (20 mm) 148 6Y-0846

Nut 148 9W-3361

1 Link Box Standard that is greater than 40% worn should be replaced with part number 264-9764.2 Link Box Offset that is greater than 40% worn should be replaced with part number 339-0265.3 Not part of link assembly; required to assemble track group.4 Clamp Master links 2 - 318-2375 and 4 - 254-0225 Master Bolts

953D/C/B SystemOne MADE TO ORDER (MTO) PRESS FIT TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES



Double Grouser Shoe -- 19.7" (500 mm) 2 243-0495

476


953C HYBRID TRACKBBX

7.50" (190.5 mm) PITCH -- 5/8" BOLT



Track Links







Other Components

Pin 37 160-7818 1

Bushing 37 229-6915



Stopper 37 5G-2247

Plug 37 6Y-0473

Track Hardware 2

Bolt 144 9G-3110

Nut 144 1M-1408



Special Sets/Groups



1 Former pin 3P-3880 (use 9G-1642 stopper).2 Not part of link assembly; required to assemble track group.

953C MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES




477


953C HEAVY DUTY SEALED AND LUBRICATED TRACKBBX

7.50" (190.5 mm) - PITCH 3/4" BOLT



Track Links







Other Components

Pin 37 179-0126

Bushing 37 106-1618



Stopper 37 5G-2247

Plug 37 6Y-0473

Track Hardware 1

Bolt 144 6V-1792

Nut 144 1S-1860

Master Bolt 2 107-0719


Special Sets/Groups




478


953C ROTATING BUSHING TRACK 1

BBX7.50" (190.5 mm) PITCH - 3/4" BOLT



Track Links





RH Regular 3 36 165-1750

LH Regular 3 36 165-1751

Other Components

Pin 37 156-4701

Bushing 37 165-1768



Stopper 37 5G-2247

Plug 37 6Y-0473

Track Hardware 4

Bolt 144 6V-1792

Nut 144 1S-1860



1 Rotating Bushing Track is an application specific undercarriage designed for high abrasion/low impact applications (4,000 hour systemlife or less).2 Serviced replaced by 106-1635 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.3 Joint Assemblies ( include link and insert). Insert not serviced4 Not part of link assembly; required to assemble track group.

479


953C, 953B, 953 TRACK2ZN, 20Z, 44Z, 5MK, 5Z, 76Y, 77Y, 78Y6.91" (175.5 mm) PITCH -- 5/8" BOLT



Track Links







Other Components

Pin 40 160-7818 1

Bushing 40 7T-4636



Stopper 40 5G-2247

Plug 40 6Y-0473

Track Hardware 2

Bolt 156 7H-3597

Nut 156 1M-1408


Special Sets/Groups




953C MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES



Double Grouser Shoe -- 19.7" (500 mm) 2 8E-5281

953D SystemOne TRACK SHOES7.50" (190.5 mm) PITCH 20 mm BOLT




Double Grouser (Center Opening) 18.9" (480 mm) 300-3660

480


953C/B SystemOne TRACK SHOES7.50" (190.5 mm) PITCH 20 mm BOLT





953C TRACK SHOESBBX

7.50" (190.5 mm) PITCH - 5/8" BOLT





Double Grouser (Trapezoidal Opening) 19.7" (500 mm) 233-7230

953C, 953B, 953 TRACK SHOES6.91" (171.5 mm) PITCH - 5/8" BOLT

TYPE WIDTH

REGULARSHOE PART


Single Grouser - Moderate Service (Trapezoidal Opening) 1 15.0" (380 mm) 6Y-5185 6Y-5186

Double Grouser 2 15.0" (380 mm) 8E-4724 8E-4725


Triple Grouser 3 15.0" (380 mm) 3T-3690 8E-4725 4

Triple Grouser 15.0" (380 mm) 6K-1910 8E-4725 4

Rubber 2 19.7" (500 mm) 112-8139 112-8136

1 Trapezoidal opening.2 LGP use only.3 Slotted Center Punched.4 Double Grouser Master.

953C TRACK SHOERBT & HD LINK ASSEMBLY

7.50" (190.5 mm)PITCH - 3/4 BOLT

TYPE WIDTH

REGULARSHOE PART


Double Grouser 15.0" (380 mm) 187-2005 187-2006


481


953D SystemOne SprocketsLBP

7.50" (190.5 mm) PITCH



Bolt 25 6V-0937

953C SPROCKETSBBX (Hybrid, Heavy Duty, Rotate Bushing, and SystemOne Track)

7.50" (190.5 mm) PITCH



Bolt 25 197-9674

Nut (Square) 25 196-4672

953C SystemOne SPROCKETS2ZN Machines


Sprocket - Rim (25 Tooth) 1 258-9802

Bolt (16 mm) 27 197-9674

Nut (Square) 27 196-4672

953C SPROCKETS6.91" (171.5 mm) PITCH




Sprocket Segment (Non Abrasive Applications) 9 185-6152

Bolt (Fine Thd) (16mm) 27 197-9674

Nut (Fine Thd) (Square) 27 196-4672

1 Former 3 tooth segment design has been replaced by 3 - 212-4205 segments & 3 - 212-4206 segments.

482


953B SPROCKETS6.91" (171.5 mm) PITCH




Bolt 27 6V-0937

Nut 27 7H-3607

953D SytemOne IDLERSCONVENTIONAL IDLERS

LBP



Other Components


Bearing 1 1 8P-6652

Shaft 1 166-0613






Bolt 12 9B-7237

Washer 12 8T-4896

Plug 1 2P-0347

Lock 2 5M-5000

Bolt 2 7X-0311

Washer 2 7X-0563

Swing Link 1 279-9322








483


953C/B SystemOne CENTER TREAD IDLERS



Other Components


Bearing 1 1 8P-6652

Shaft 1 166-0613






Bolt 12 9B-7237

Washer 12 8T-4896

Plug 1 2P-0347

Lock 2 5M-5000

Bolt 2 7X-0311

Washer 2 7X-0563



Plate - Scraper (Mounts to Yoke) 2 280-1417

Bolt (12 mm) 6 8T-4139

Washer 6 8T-4223

Shim (Install between TRF and Idler Guards) 6 279-9120

Bolt (16 mm) 12 7X-2554

Washer 12 8T-4122







484


953C IDLERS2ZN2609-UP, BBX



Other Components


Bearing 1 1 8P-6652

Shaft 1 166-0613






Bolt 12 9B-7237

Washer 12 8T-4896

Plug 1 2P-0347

Lock 2 5M-5000

Bolt 2 7X-0311

Washer 2 7X-0563









485


953C, 953B, 953 IDLERSFORMER DESIGN



Other Components


Bearing 1 1 8P-6652

Shaft 1 5K-0305






Bolt 12 9B-7237

Washer 12 8T-4896

Plug 1 2P-0347

Lock 2 5M-5000

Bolt 2 7X-0311

Washer 2 7X-0563

Swing Link 1 7P-7911

Swing Link 1 7P-7912







953D/C/B SystemOne CARRIER ROLLERS



486


953C, 953B, 953 CARRIER ROLLERS20Z3520-UP, 2ZN1-UP, 5MK1-UP, BBX


Group 2 6Y-3908

Components of Group


Shaft 1 6Y-2043

Cup 2 9S-3581

Cone 2 9S-3582

Ring 1 7H-4574

Cover 1 5M-2043

Collar 1 7H-4571

Plug 1 2P-0347

Bolt 3 0S-1594






Plate 1 8P-6188

Bolt 2 5K-9107





487


953 CARRIER ROLLERS20Z1-3519


Group 2 5A-8374

Components of Group


Shaft 1 3T-3207

Cup 2 9S-3581

Cone 2 9S-3582

Ring 1 1M-7914

Cover 1 5M-2043

Collar 1 9S-3567

Plug 1 2P-0347

Bolt 3 0S-1594






Plate 1 8P-6188

Bolt 2 5K-9107





953D/C SystemOne TRACK ROLLERS



Mounting Hardware 1

Cap 2 223-9110

Bolt (16 mm) 4 8T-0281

Washer 4 9X-8268


488


953C, 953B TRACK ROLLERSCURRENT DESIGN (END COLLARS, SYMMETRIC SEALS)

2ZN218-UP, 5MK2689-UP




Tall Flange Double (TFD) - 3 121-0830 4

Components of Group



Roller Shell (DF) (Tall Flange) 1 121-0831


Bearing 1 8P-6652

Shaft 1 131-8742 6








Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 8

Bolt - Current 953 (16 mm) 9 4 6V-3303

Bolt - Early 953 (5/8") 9 4 8S-9092

Washer (5/8")/16mm 4 5P-8247

1 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric HardwareServiced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247.2 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric HardwareServiced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247.3 Optional DF roller for guiding; use quantity required for the specific roller frame type.4 Serviced Replaced By: 1 - Roller Group (DF) 310-4918, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247. Metric5 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric HardwareServiced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247.6 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric HardwareServiced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247 or Serviced ReplacedBy: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric Hardware Serviced Replaced By: 1 -Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247. or Serviced Replaced By: 1 - Roller Group (DF)310-4918, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247. Metric7 Component of preceding assembly or group; quantity shown is quantity per assembly or group.8 These components are not included in the roller group; quantities shown are required to mount each roller.9 953 machine effectivity for 16mm roller mounting bolts (20Z3520-UP, 5MK1-UP); All Early 953 serial numbers (76Y, 77Y, 78Y, 5Z, 20Z,44Z, and 20Z1-3519) require 5/8" English mounting bolts.

489


953B, 953 TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER)


Roller Group (DF) 4 --

Roller Group (SF) 8 --

Components of Group

Roller Shell (DF) 1 9P-1362 1

Roller Shell (SF) 1 9P-1367 2

Bearing 3 2 9P-1360

Shaft 1 3T-9875



Dowel 4 4 1L-5072

Bolt 12 0S-1594

Washer 12 5M-2894




O-Ring 3 1 6V-2699


Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 5

End Cap 2 8E-0281

Bolt - Current 953 (16 mm) 6 4 8T-0281

Bolt - Early 953 (5/8") 6 4 1B-4367

Washer (5/8")/16mm 4 5P-8247

1 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367 (5/8 ), 4 - Washer 5P-8247. Metric HardwareServiced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 8T-0281 (16mm), 4 - Washer 5P-8247.2 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-436 (5/8 )7, 4 - Washer 5P-8247. Metric HardwareServiced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 8T-0281 (16mm), 4 - Washer 5P-8247.3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.4 These components are only to repair retainer assembly. See Special Instruction SEHS8515.5 These components are not included in the roller group; quantities shown are required to mount each roller.6 953 machine effectivity for 16mm roller mounting bolts (20Z3520-UP, 5MK1-UP); All Early 953 serial numbers (76Y, 77Y, 78Y, 5Z, 20Z,44Z, and 20Z1-3519) require 5/8" English mounting bolts.

953D END GUIDING GUARDS (FRONT)USE WITH SystemOne





490


953C/B END GUIDING GUARDS (FRONT)USE WITH HYBIRD AND SystemOne






Bolt 16 8T-4139

Washer 16 8T-4223

953C END GUIDING GUARDS (FRONT)USE WITH ROTATING BUSHING AND HEAVY DUTY TRACK

7.50" (190.5mm) PITCH






Bolt 16 8T-4139

Washer 16 8T-4223







Bolt 16 5P-2228





Bolt 20 5P-2228

491


953D TRACK GUIDING GUARDS (REAR SPROCKET)USE WITH SystemOne


Rear Guard -- Right Outer, Left Inner 2 254-5288

Rear Guard -- Left Outer, Right Inner 2 254-5289

Bolt (M16) (Short) (Guard to Frame) 8 8T-4140

Bolt (M16) (Long) (Guard to Frame) 8 7X-2475

Washer 16 8T-4122

Plate 2 310-8310

Plate 2 310-8311

Plate Assembly 2 310-8312

Bolt (M12) (Plate to Plate Assembly) 18 8T-4139

Bolt (M12) (Plate to Guard ) 8 8T-4192

Washer 26 8T-4223

953C/B TRACK GUIDING GUARDS (REAR SPROCKET)USE WITH HYBIRD AND SytemOne


Rear Guard -- Right Outer, Left Inner 2 8Y-1841

Rear Guard -- Left Outer, Right Inner 2 8Y-1842

Bolt 8 8T-4140

Bolt 8 7X-2475

Washer 16 8T-4122

Strip 4 3W-8536

Bolt 16 8T-4139

Washer 16 8T-4223

Plate Assembly 2 8Y-1990

Plate 2 8Y-1994

Plate 2 8Y-1993

Bolt 18 8T-4139

Bolt 8 8T-4192

Washer 26 8T-4223

492


953C TRACK GUIDING GUARDS (REAR SPROCKET)USE WITH ROTATING BUSHING AND HEAVY DUTY TRACK

7.50" (190.5 mm) PITCH




Bolt 8 8T-4140

Bolt 8 7X-2559

Washer 16 8T-4122


Bolt 34 8T-4139

Washer 42 8T-4223

Plate Assembly 2 8Y-1990

Plate 2 8Y-1994

Plate 2 8Y-1993

Bolt 8 8T-4192

953D TRACK ROLLER GUARDS (FULL LENGTH)




Bolt (M16) (Guard Assembly to Frame) 16 8T-4779

Washer 16 8T-4122

Spacer 8 7P-7368

Rod 8 8Y-2281

Washer 16 8T-4122

Nut 16 8T-4132

Plate 8 259-6864

Bolt (M12) (Plate to End Guard) 16 8T-4956

Washer 16 8T-4223

493


953C/B TRACK ROLLER GUARDS (FULL LENGTH)


Guard Assembly



Bolt 16 8T-4779

Washer 16 8T-4122

Spacer 8 7P-7368

Rod 8 8Y-2281

Nut 16 8T-4132

Washer 16 8T-4122

Plate 8 8Y-2210

Bolt 16 8T-4183

Washer 16 8T-4223

Strip 4 8Y-2211

Strip 4 8Y-2212

953 TRACK ROLLER GUARDS (FULL LENGTH)


Guard Assembly

Right Outer, Left Inner 1 7P-7369

Left Outer, Right Inner 1 7P-7373

Bolt 16 7X-0343

Washer 16 8T-4122

Spacer 8 7P-7368

Bolt 8 5P-4624

Nut 8 7X-0488

Washer 16 8T-4122

Plate 8 8G-4077

Bolt 16 8T-4835

Spacer 16 5F-7207

494


953D SystemOne IDLER GUARDSCONVENTIONAL IDLERS



Bolt (M12) 12 8T-4139

Washer 12 5P-1076




Bolt (M12) 12 8T-4192

Bolt (M12) 8 8T-4194

Washer 20 5P-1076

953D SystemOne IDLER SCRAPER


Guard - Scraper 4 7P-7732

Bolt (M12) 12 8T-4139

Washer 12 8T-4223

495


955 SEALED AND LUBRICATED TRACKHYBRID LINKS

13X, 57M, 64J9258-UP, 71J5832, 85J10129-UP8.00" (203.2 mm) PITCH -- 3/4" BOLT



Track Links







Other Components

Pin 36 160-7819 1

Bushing 36 230-4512



Stopper 36 5G-2247

Plug 36 6Y-0473

Track Hardware 2

Bolt 140 1S-1859

Nut 140 1S-1860


Special Sets/Groups




496


955 SEALED AND LUBRICATED TRACK13X, 57M, 64J9258-UP, 71J5832, 85J10129-UP

8.00" (203.2 mm) PITCH -- 3/4" BOLT



Track Links







Other Components

Pin 36 160-7819 2

Bushing 36 8E-5257



Stopper 36 5G-2247

Plug 36 6Y-0473

Track Hardware 3

Bolt 140 1S-1859

Nut 140 1S-1860


Special Sets/Groups



1 Service replaced by 236-9861 hybrid link assembly.2 Former pin 3P-1108 (use 9G-1642 stopper).3 Not part of link assembly; required to assemble track group.

497


955 SEALED TRACKHYBRID TWO PIECE MASTER LINK




Track Links







Other Components

Pin 36 4M-5989

Bushing 36 237-7305

Seal-Washer 144 8M-7231

Track Hardware 1

Bolt 140 1S-1859

Nut 140 1S-1860



498


955 SEALED TRACKTWO PIECE MASTER LINK




Track Links







Other Components

Pin 36 4M-5989

Bushing 36 4M-5991

Seal 144 8M-7231

Track Hardware 2

Bolt 140 1S-1859

Nut 140 1S-1860


Special Sets/Groups


1 Service replaced by 238-9951 hybrid link assembly.2 Not part of link assembly; required to assemble track group.

499


955 SEALED TRACKHYBRID ONE PIECE MASTER LINK




Track Links





Other Components

Pin 35 4M-5989


Bushing 35 237-7305


Seal 144 8M-7231

Spacer 2 8M-7290

Track Hardware 1

Bolt 144 1S-1859

Nut 144 1S-1860


500


955 SEALED TRACKNO MASTER LINK




Track Links



Other Components

Pin 35 4M-5989


Bushing 35 4M-5991


Seal 144 8M-7231

Spacer 2 8M-7290

Track Hardware 2

Bolt 144 1S-1859

Nut 144 1S-1860

Special Sets/Groups


1 Upgrade to 238-9950 Hybrid One Piece Master Link Assembly.2 Not part of link assembly; required to assemble track group.

501


955 EXTENDED WEAR LIFE TRACKRIGID SEAL, LARGE O.D. BUSHING

13X, 57M, 64J9258-UP, 71J5832-UP, 85J10129-UP8.00" (203.2 mm) PITCH -- 3/4" BOLT



Track Links







Other Components

Pin 36 160-7819 2




Stopper 36 5G-2247

Plug 36 6Y-0473

Track Hardware 4

Bolt 140 1S-1859

Nut 140 1S-1860


Special Sets/Groups



1 Serviced replaced by 236-9861 Hybrid link assembly.2 Former pin 3P-1108 (use 9G-1642 stopper)3 If small O.D. bushing is required, use 3P-1109.4 Not part of link assembly; required to assemble track group

502


955 SEALED AND LUBRICATED TRACK31J, 48H, 57J, 60A, 61H, 64J1-9257, 71J1-5831, 72A, 77A, 85J1-10128, 93A

6.91" (175.5 mm) PITCH -- 5/8" BOLT



Track Links







Other Components

Pin 160-7818 1 39 41

Bushing 7T-4636 2 39 41



Stopper 5G-2247 39 41

Plug 6Y-0473 39 41

Track Hardware 3

Bolt 7H-3597 152 160

Nut 1M-1408 152 160


Special Sets/Groups



1 Former pin 3P-3880 (use 9G-1642 stopper)2 Service straight wall bushing track with 3P-3879 bushing.3 Not part of link assembly; required to assemble track group.

503


955 SEALED TRACK31J, 48H, 57J, 60A, 61H, 64J1-9257, 71J1-5831, 72A, 77A, 85J1-10128, 93A

6.91" (175.5 mm) PITCH -- 5/8" BOLT


Link Assembly (Quantity 2) 3P-5757 1V-7077

Track Links







Other Components

Pin 6B-5502 39 41

Bushing 5S-0710 39 41

Seal 5S-0709 156 164

Track Hardware 1

Bolt 7H-3597 152 160

Nut 1M-1408 152 160


Special Sets/Groups



504


955 SEALED TRACKONE PIECE MASTER LINK

31J, 48H, 57J, 60A, 61H, 64J1-9257, 71J1-5831, 72A, 77A, 85J1-10128, 93A6.91" (175.5 mm) PITCH -- 5/8" BOLT



Track Links





Other Components

Pin 38 6B-5502


Bushing 38 5S-0710


Seal 156 5S-0709

Spacer 2 5S-0754

Track Hardware 2

Bolt 156 7H-3597

Nut 156 1M-1408

Special Sets/Groups


1 Upgrade to 39 section 3P-5757 link assembly or 41 section 1V-7077 link assembly..2 Not part of link assembly; required to assemble track group.


TYPE WIDTH

REGULARSHOE PART





505



TYPE WIDTH

REGULARSHOE PART


Single Grouser - Moderate Service 15.0" (380 mm) 9K-3028 4V-7410



Triple Grouser (Center Punched Slots) 13.7" (348 mm) 9G-6389 8E-4728 1


Triple Grouser (Center Punched Slots) 15.0" (380 mm) 6K-1910 8E-4725 1


955 SPROCKETS85J10129-UP, 13X 1

8.00" (203.2 mm) PITCH




Bolt 20 3S-8182

Nut 20 7H-3607

1 Use 3V-2093 Sprocket Hub for attatchment wide gauge.

955 SPROCKETS48H, 53H, 31J, 57J, 64J, 71J, 61H, 85J1-10128

6.91" (175.5 mm) PITCH


Sprocket Hub 1 7K-1311 1



Adapter Ring 1 6K-1261

Bolt 29 3S-8182

Nut 29 7H-3607

1 Service replacement Classic 224-1313.

506


955 IDLERS85J10129-UP, 71J5832-UP, 64J9258-UP, 13X, 57M

8.00" (203.2 mm) PITCH




Other Components


Bearing 2 1 8P-5197

Shaft 1 5M-5005







Bolt 12 0S-1588

Washer 12 3B-4506

Plug 1 2P-0347




Bushing O-Ring (Steel Mill) 2 2S-2182


1 For use with extended wear life track.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

507


955 IDLERS61H, 48H, 31J, 85J1-10128, 71J1-5831, 64J1-9257

6.91" (175.5 mm) PITCH



Other Components


Bearing 1 1 8P-6652

Shaft 1 5M-1913





Bolt 12 0S-1587

Washer 12 3B-4508

Plug 1 2B-7408







508


955 CARRIER ROLLERS8.00" (203.2 mm) PITCH: 13X, 57M, 64J9258-UP, 85J10129-UP, 71J5832-UP

6.91" (175.5 mm) PITCH: 60A, 72A, 77A, 93A, 48H, 53H, 61H, 31J, 57J, 64J1-9257, 85J1-10128, 71J1-5831


Group 2 5A-8374

Components of Group


Shaft 1 3T-3207

Cup 2 9S-3581

Cone 2 9S-3582

Ring 1 1M-7914

Cover 1 5M-2043

Collar 1 9S-3567

Plug 1 2P-0347

Bolt 3 0S-1594

Plate 1 8P-6188

Bolt 2 5K-9107










509


955 STANDARDIZED TRACK ROLLERS64J9258-UP, 85J10129-UP, 13X, 71J5832-UP, 57M

8.00" (203.2 mm) PITCH




Double (DF) (Arctic) 6 288-0946




Mounting Hardware (3/4") 1

Cap 2 317-9079

Bolt (3/4") 4 1D-4610

Washer 4 5P-8248

Mounting Hardware (5/8") 1

Cap 2 317-9078

Bolt (5/8") 4 1D-4585

Washer 4 2S-0736


510


955 TRACK ROLLERS64J9258-UP, 85J10129-UP, 13X, 71J5832-UP, 57M

8.00" (203.2 mm) PITCH




Extended Wear Life (DF) (Requires 3/4" mounting hardware) 3 6 118-1635 4

Extended Wear Life (SF) (Requires 3/4" mounting hardware) 3 6 118-1634 5

Components of Group

Roller Shell (DF) 1 6Y-2904 1

Roller Shell (SF) 1 6Y-2902 2

Extended Wear Life Shell (DF) 3 1 9W-5411 4

Extended Wear Life Shell (SF) 3 1 9W-5408 5


Bearing 6 1 8P-5197

Shaft 1 116-6702 7


Bolt 12 2P-3201





Stopper 1 7G-4332

Plug 1 6Y-0473

Ring 2 5M-4443

Mounting Hardware 9

Bolt (5/8") 4 1A-8537

Washer 4 2S-0736




Bushing O-Ring (Steel Mill) 2 8S-5654


1 Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.2 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.3 For use with Extended Wear Life Track.4 Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.5 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.6 Component of preceding assembly or group; quantity shown is per assembly or group.7 Replaces former 5M-4448 shaft; requires 2 - 5M-4436 end collars. Serviced Replaced By: 1 - Roller Group (DF) 288-0935, or 1 - RollerGroup (SF) 288-0934; AND 3/4" hardware 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248, OR 5/8" hardware 2 - End Cap317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.8 If 5M-4448 shaft is used, use 1 -- 5M-4436 and 1 -- 5M-4435 end collar.9 These components are not included in the roller group; quantities shown are required to mount each roller.

511


955 TRACK ROLLERS60A, 72A, 77A, 93A, 48H, 53H, 61H, 31J, 64J1-9257, 85J1-10128, 71J1-5831

6.91" (175.5 mm) PITCH




Components of Group




Bearing 3 1 8S-5796

Shaft 1 118-1613 4


Bolt 12 2P-3201





Stopper 1 7G-4332

Plug 1 6Y-0473

Ring 2 6H-7382

Mounting Hardware 6

Bolt 4 8S-9092

Washer 4 5P-8247






1 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.2 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.3 Component of preceding assembly or group; quantity shown is per assembly or group.4 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Serviced Replaced By:1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.5 If 5M-1915 shaft is used, use 1 -- 5M-0627 and 1 -- 1M-3812 end collar.6 These components are not included in the roller group; quantities shown are required to mount each roller.

512


955 END GUIDING GUARDS64J9258-UP, 85J10129-UP, 71J15832-UP, 13X, 57M



Guard Assembly 1 1V-8176


Bolt 4 5K-8454




Bolt 4 5K-8454

Rear (Outer RH)



Bolt 4 5K-8454

Rear (Outer LH)



Bolt 4 5K-8454

955 END GUIDING GUARDS48H, 53H, 61H, 31J, 57J, 64J1-9257, 85J1-10128, 71J1-5831





Bolt 4 5K-8454




Bolt 4 5K-8454

Rear (Outer RH)



Bolt 4 5K-8454

Rear (Outer LH)



Bolt 4 5K-8454

513


955 CENTER GUIDING GUARDS64J9258-UP, 71J5832-UP, 85J10129-UP, 13X, 57M


Guard Assembly 2 1P-0963 1

Wear Strip 4 3V-1133 2

Bolt 8 6H-1717


Bolt 16 1D-4608

1 Classic Optional service replacement 226-0179.2 Classic Optional service replacement 226-0203.

955 CENTER GUIDING GUARDS48H, 53H, 61H, 31J, 57J, 64J1-9257, 71J1-5831, 85J1-10128




Bolt 16 031-0221

514


963D SystemOne TRACKPRESS FIT MASTER

LCS8.00" (203.2 mm) PITCH - 22 mm BOLT






Standard Link (Press Fit) 2 2 234-9699

Track Hardware 2

Bolt (22 mm) 152 6Y-9024

Nut 152 9W-4381

1 Link Box Standard that is greater than 40% worn should be replaced with part number 351-0963.2 Not part of link assembly; required to assemble track group.

963D SystemOne TRACKCLAMP MASTER

LCS8.00" (203.2 mm) PITCH - 22 mm BOLT






Standard Link (Clamp Master) 2 2 318-1064

Track Hardware 2

Bolt (22 mm) 148 6Y-9024

Nut 148 9W-4381

Master Bolt (22 mm) 4 254-0224

1 Link Box Standard that is greater than 40% worn should be replaced with part number 351-0963.2 Not part of link assembly; required to assemble track group.

515


963C/B, 963 SystemOne TRACKPRESS FIT MASTER

8.00" (203.2 mm) PITCH - 22 mm BOLT







Standard Link (Press Fit) 3 2 234-9699

Track Hardware 3

Bolt (22 mm) 148 6Y-9024

Nut 148 9W-4381


963C/B, 963 SystemOne TRACKCLAMP MASTER

8.00" (203.2 mm) PITCH - 22 mm BOLT







Standard Link (Clamp Master) 3 2 318-1064

Track Hardware 3

Bolt (22 mm) 144 6Y-9024

Nut 144 9W-4381

Master Bolt (22 mm) 4 254-0224


963C/B, 963 SystemOne MADE TO ORDER (MTO) PRESS FIT TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES




516


963C, 963B, 963 HYBRID TRACKLARGE O.D. BUSHING

11Z, 18Z, 2DS, 21Z, 29S, 48Z, 6Z, 9BL, BBD8.00" (203.2 mm) PITCH -- 3/4" BOLT



Track Links







Other Components

Pin 37 160-7819 1

Bushing 37 230-4512



Stopper 37 5G-2247

Plug 37 6Y-0473

Track Hardware 2

Bolt 144 1S-1859

Nut 144 1S-1860


Special Sets/Groups


Bushing and Seal Groups (37 Sections) 1 293-9147

1 Former pin 3P-1108 (Use 9G-1642 Stopper)2 Not part of link assembly; required to assemble track group.

963C, 963B, 963 MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIES




517


963C, 963B, 963 TRACKLARGE O.D. BUSHING

11Z, 18Z, 2DS, 21Z, 29S, 48Z, 6Z, 9BL8.00" (203.2 mm) PITCH -- 3/4" BOLT



Track Links







Other Components

Pin 37 160-7819 2

Bushing 37 8E-5257



Stopper 37 5G-2247

Plug 37 6Y-0473

Track Hardware 3

Bolt 144 1S-1859

Nut 144 1S-1860


Special Sets/Groups



1 Serviced replaced by 230-6167 hybrid link assembly.2 Former pin 3P-1108 (Use 9G-1642 Stopper)3 Not part of link assembly; required to assemble track group.

518


963B, 963 TRACKSMALL O.D. BUSHING

11Z, 18Z, 21Z, 29S, 48Z, 6Z, 9BL8.00" (203.2 mm) PITCH -- 3/4" BOLT



Track Links







Other Components

Pin 37 160-7819 2

Bushing 37 3P-1109



Stopper 37 5G-2247

Plug 37 6Y-0473

Track Hardware 3

Bolt 144 1S-1859

Nut 144 1S-1860


Special Sets/Groups

Bushing and Seal Group (36 Sections) 4 1 6I-8061


1 Upgrade to 117-1023 Link Assembly.2 Former pin 3P-1108 (Use 9G-1642 Stopper)3 Not part of link assembly; required to assemble track group.4 Contains 8E-5257 large O.D. bushings and rigid track seals.

963D SystemOne TRACK SHOES8.00" (203.2 mm) PITCH - 22 mm BOLT

TYPE WIDTH

REGULARSHOE PART




Double Grouser (Center Hole) 21.7" (550 mm) 292-6381 --

519


963C/B, 963 SystemOne TRACK SHOES8.00" (203.2 mm) PITCH - 22 mm BOLT






Single Grouser - Extreme Service (Center Opening) 18.0" (460 mm) 264-1108

963C, 963B, 963 TRACK SHOES8.00" (203.2 mm) PITCH -- 3/4" BOLT

TYPE WIDTH

REGULARSHOE PART


Single Grouser - Extreme Service 18.0" (460 mm) 6Y-6393 6Y-6392

Single Grouser - Extreme Service (Trapezoidal Opening) 18.0" (460 mm) 1Q-4985 1Q-4984

Single Grouser - Moderate Service 18.0" (460 mm) 6Y-6289 6Y-6290

Single Grouser - Moderate Service (Trapezoidal Opening) 18.0" (460 mm) 1Q-4921 1Q-4922


Double Grouser (Trapezoidal Opening) 17.7" (450 mm) 1Q-4610 1Q-4609

Double Grouser (Trapezoidal Opening) 1 21.7" (550 mm) 1Q-4640 1Q-4641





1 LGP use only2 Double Grouser shoe

963D SystemOne SPROCKETS



Bolt 25 3S-8182

Nut 25 7H-3607

963C, 963B, 963 SPROCKETSSystemOne, Hybrid, Rotating Bushing,and Sealed and Lubricated Track




Bolt 20 3S-8182

Nut 20 7H-3607

520


963D SystemOne IDLERSCONVENTIONAL IDLERS



Other Components


Bearing 1 1 8P-5197

Shaft 1 255-8060

Lock 2 5M-5000

Bolt 2 7X-0318

Washer 2 7X-0563





Bolt 12 9B-7237

Washer 12 8T-4896

Stopper 1 7G-4332

Plug 1 6Y-0473








Stopper 1 3T-3800

Plug 1 3T-3799


521


963C/B, 963 SystemOne CENTER TREAD IDLER


Idler 2 228-4231

Other Components


Bearing 1 1 8P-5197

Shaft 1 8G-1450 2

Lock 2 5M-5000

Bolt 2 7X-0318

Washer 2 7X-0563



O-Ring 1 1 6V-1914


Bolt 12 9B-7237

Washer 12 8T-4896

Stopper 1 7G-4332

Plug 1 6Y-0473

Swing Link 1 8Y-2203




Bolt (12 mm) 4 8T-4139

Washer 4 5P-1076

Shim (Install between TRF and Idler Guards) 2 255-5983

Bolt (20 mm) 2 8T-4187

Bolt (20 mm) 4 8T-6381

Washer 6 8T-4123




O-Ring 1 1 9W-1057


Stopper 1 3T-3800

Plug 1 3T-3799

1 Component of preceding group; quantity shown is the quantity per group.2 Service Replaced by 255-8060.

522


963C, 963B, 963 IDLERS



Other Components


Bearing 1 1 8P-5197

Shaft 1 8G-1450 2

Lock 2 5M-5000

Bolt 2 7X-0318

Washer 2 7X-0563



O-Ring 1 1 6V-1914


Bolt 12 9B-7237

Washer 12 8T-4896

Stopper 1 7G-4332

Plug 1 6Y-0473






O-Ring 1 1 9W-1057


Stopper 1 3T-3800

Plug 1 3T-3799

1 Component of preceding group; quantity shown is the quantity per group.2 Service Replaced by 255-8060.

963D/C/B, 963 SystemOne CARRIER ROLLERS



523


963C, 963B, 963 CARRIER ROLLERSLARGE DIAMETER SHAFT

21Z3442-UP, 2DS, 9BL, BBD


Group 2 6Y-1781 1

Components of Group


Shaft 1 6Y-2043

Cup 2 9S-3581

Cone 2 9S-3582

Ring 1 7H-4574

Cover 1 5M-2043

Collar 1 7H-4571

Plug 1 2P-0347

Bolt 3 0S-1594

Bolt 2 5K-9107

Plate 1 8P-6188









1 Service Replaced By 235-5974 Carrier Roller Gp.2 Component of preceding group; quantity shown is the quantity per group.

524


963 CARRIER ROLLERSSMALL DIAMETER SHAFT

11Z, 18Z, 21Z1-3441, 29S, 48Z, 6Z


Group 2 3T-3206

Components of Group


Shaft 1 3T-3207

Cup 2 9S-3581

Cone 2 9S-3582

Ring 1 1M-7914

Cover 1 5M-2043

Collar 1 9S-3567

Plug 1 2P-0347

Bolt 3 0S-1594

Bolt 2 5K-9107

Plate 1 1M-7913









1 Component of preceding group; quantity shown is the quantity per group

963D/C/B, 963 SystemOne TRACK ROLLERS



Mounting Hardware 2

Cap (20 mm) 2 317-9080

Bolt (20 mm) 4 8T-0360

Washer 4 8T-3282

Cap (3/4") 2 317-9079

Bolt (3/4") 4 1D-4610

Washer 4 5P-8248

1 963D requires 14 roller groups, 963C/B, 963 requires 12 roller groups.2 These components are not included in the roller group; quantities shown are requried to mount each roller.

525


963C/B STANDARDIZED TRACK ROLLERSWITH END CAPS








Double Flange (DF) (Tall) - 1 288-0936

Mounting Hardware (Metric Hardware) 2

Cap 2 317-9080

Bolt (20 mm) 4 8T-0360

Washer 4 8T-3282

Mounting Hardware (Inch Hardware) 2

Cap 2 317-9079

Bolt (3/4") 4 1D-4610

Washer 4 5P-8248

1 Optional (DF) roller for guiding. Use quantity required for specific roller frame type.2 These components are not included in the roller group; quantities shown are required to mount each roller.

526


963C, 963B TRACK ROLLERSCURRENT DESIGN (END COLLARS, SYMMETRIC SEALS)

2DS, 9BL, BBD





Components of Group



Roller Shell (TFD) 1 120-5804 4


Bushing Assembly - Bearing 5 1 8P-5197

Shaft 1 116-6702 6

Collar 2 120-5785

Retaining Ring 2 117-9748



Toric Ring 5 2 162-2166



Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 7

Bolt (3/4") 8 4 1D-4608

Bolt (20 mm) 8 4 6V-5845

Washer (3/4") 4 5H-1504

Washer (20 mm) 4 8T-3282

1 For 963 with Metric Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9080, 4 - Bolt 8T-0360, 4 - Washer8T-3282. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 -Washer 5P-8248.2 For 963 with Metric Hardware Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9080, 4 - Bolt 8T-0360, 4 - Washer8T-3282. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 -Washer 5P-8248.3 Optional DF roller for guiding; use quantity required for specific roller frame type.4 For 963 with Metric Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0936, 2 - End Cap 317-9080, 4 - Bolt 8T-0360, 4 - Washer8T-3282. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0936, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 -Washer 5P-8248.5 Components of proceeding assembly or group; quantity shown is quantity per assembly or group.6 For 963 with Metric Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935 or 1 - Roller Group (SF) 288-0934, and 2 - End Cap317-9080, 4 - Bolt 8T-0360, 4 - Washer 8T-3282. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935, or 1 -Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.7 These components are not included in the roller group; quantities shown are required to mount each roller.8 963 machine effectivity for 20 mm metric mounting bolts (21Z3442 -- UP, 9BL1-- UP). All other 963 serial numbers (06Z, 11Z, 18Z, 48Z,and 29S) required 3/4" English mounting bolts.

527


963B, 963 TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER)

18Z1352-UP excluding 1354, 1359, 1363; 21Z319-UP; 9BL




Components of Group

Roller Shell (DF) 1 7T-4106 1

Roller Shell (SF) 1 7T-4101 2

Bearing 3 2 9P-2245

Shaft 1 6T-0720 4


Thrust Washer 5 1 9W-2423

Dowel 5 4 2H-1190

Bolt 12 0S-1594

Washer 12 5M-2894




O-Ring 3 1 6V-2701


Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 6

End Cap 2 6T-4861

Bolt 7 4 1D-4610

Washer 7 4 5P-8248

Bolt 8 4 8T-0360

Washer 8 4 8T-3282




O-Ring 3 1 8T-2272

Seal -- Retainer 2 4S-5898

1 For 963 with Metric Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 214-1109, 4 - Bolt 8T-0360, 4 - Washer8T-3282. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 288-0970, 4 - Bolt 1D-4610, 4 -Washer 5P-8248.2 For 963 with Metric Hardware Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 214-1109, 4 - Bolt 8T-0360, 4 - Washer8T-3282. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 288-0970, 4 - Bolt 1D-4610, 4 -Washer 5P-8248.3 Component of preceding assembly or group; quantity shown is per assembly or group.4 For 963 with Metric Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935 or 1 - Roller Group (SF) 288-0934, and 2 - End Cap214-1109, 4 - Bolt 8T-0360, 4 - Washer 8T-3282. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935, or 1 -Roller Group (SF) 288-0934, 2 - End Cap 288-0970, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.5 These components used to repair retainer assembly. See instruction SEHS8915.6 These components are not included in the roller group; quantities shown are required to mount each roller.7 Inch hardware 3/4 inch -- serial number 21Z-0319 -- 3441.8 Metric hardware 20mm -- serial number 21Z- 3442 -- UP.

528


963 TRACK ROLLERSEARLY DESIGN

11Z, 18Z1-1352, 21Z1-318, 29S, 48Z, 6Z




Components of Group

Roller Shell (DF) 1 9G-8032 1



Bearing 3 1 8P-6651

Shaft 1 116-6702 4


Bolt 12 2P-3201






Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 6

Bolt 4 1D-4608

Washer 4 5H-1504





Seal - Shaft O-Ring (Steel Mill) 2 8M-4436

1 For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 288-0970, 4 - Bolt 1D-4610, 4 - Washer5P-8248.2 For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 288-0970, 4 - Bolt 1D-4610, 4 - Washer5P-8248.3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.4 Replaces former 7G-0419 shaft, requires 2, 7G-0418 end collars. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (DF)288-0935, or 1 - Roller Group (SF) 288-0934, 2 - End Cap 288-0970, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.5 If 7G-0419 shaft is used, use (1) 7G-0418 and (1) 7G-0417 end collar.6 These components are not included in the roller group; quantities shown are required to mount each roller.

963D END GUIDING GUARDS (FRONT)USE WITH SystemOne





529


963C/B END GUIDING GUARDS (FRONT)LUBRICATED SWING LINK, METRIC HARDWARESystemOne, Hybrid, Sealed and Libricated Track






Bolt 4 7X-2553

Bolt 8 8T-4779

Washer 12 8T-4122

Bearing (Per Guard Assembly) 2 3W-8398

963 END GUIDING GUARDSLUBRICATED SWING LINK, INCH HARDWARE






Bolt 12 0S-1589

963 END GUIDING GUARDSEARLY MODEL, NON-LUBRICATED SWING LINK, INCH HARDWARE






Bolt 12 0S-1589





Bolt 16 0S-1566

Washer 16 5P-8247

530


963D END GUIDING GUARDS (REAR SPROCKET)USE WITH SystemOne




Bolt (M20) (Rear Guard to Frame) 12 8C-8478

Bolt (M20) (Rear Guard to Frame) 4 7X-2563

Washer 16 8T-4123

Tube 2 7P-4695

Rod 2 3W-8134

Nut 4 8T-4132

Washer 4 8T-4122

Guard Assembly (Outer Right) 1 254-5240

Guard Assembly (Outer Left) 1 254-5241

Guard Assembly (Inner Right) 1 254-5242

Guard Assembly (Inner Left) 1 254-5243

Plate (Inner Right) 1 139-9015

Plate (Inner Left) 1 139-9016

Bolt (M12) (Guard As. & Plate to Frame) 24 8T-4192

Washer 24 8T-4223

Bolt (M16) (Guard As. to Rear Guard) 8 8T-4193

Washer 8 7X-0515

531


963C/B END GUIDING GUARDS (REAR SPROCKET)SystemOne, Hybrid, Sealed and Libricated Track




Bolt (Rear Guard Mtg.) 4 8T-6381

Bolt (Rear Guard Mtg.) 8 8C-8478

Washer 12 8T-4123

Tube 2 7P-4695

Rod 2 3W-8134

Nut 4 8T-4132

Washer 4 8T-4122


Bolt 16 8T-4779

Bolt 4 7X-2553

Washer 16 8T-4122

Guard Assembly (Outer Left) 1 3W-8123

Guard Assembly (Outer Right) 1 3W-8120

Guard Assembly (Inner Left) 1 139-9020

Plate (Inner Left) 1 139-9016

Guard Assembly (Inner Right) 1 139-9019

Plate (Inner Right) 1 139-9015

Bolt 24 8T-4192

Washer 24 8T-4223

Bolt (Large) 4 7X-2563

Bolt (Small) 4 8T-4175

Washer (Small) 4 7X-0515

Washer (Large) 4 8T-5439

532


963D TRACK ROLLER GUARDS (FULL LENGTH)USE WITH SystemOne


Guard Assembly



Bolt (M20) 24 7X-2563

Washer 24 8T-4123

Spacer 24 8Y-1779

Tube 12 7P-4695

Rod 12 8Y-1944

Nut 24 8T-4132

Washer 24 8T-4122

Plate (Front) 4 3W-8495

Plate (Rear) 4 8Y-6625

Bolt (M16) 24 7X-2553

Washer 24 8T-4122

963C/B TRACK ROLLER GUARDS (FULL LENGTH)METRIC HARDWARE


Guard Assembly



Bolt 24 7X-2563

Washer 24 8T-4123

Spacer 24 8Y-1779

Tube 10 7P-4695

Rod 10 8Y-1944

Nut 20 8T-4132

Washer 20 8T-4122

Plate (Front) 4 3W-8495


Bolt 12 7X-2553

Bolt 12 8T-4193

Washer 24 8T-4122

Plate (Front Guide) 4 3W-8140

533


963 TRACK ROLLER GUARDS (FULL LENGTH)INCH HARDWARE


Guard Assembly



Bolt 20 8T-8924

Washer 20 8T-4994

Spacer 20 1K-3478

Tube 10 7P-4695

Rod 10 7P-4699

Nut 20 7X-0448

Washer 20 8T-4122

Plate (Front) 2 8G-7150


Plate (Rear) 4 8G-7576

Bolt 8 7X-0343

Bolt 8 7X-0347

Bolt 4 7X-0344

Bolt 4 7X-0346

Washer 24 8T-4122

Plate (Front Guide) 4 8G-7148

963D IDLER GUARDSCONVENTIONAL IDLERSUSE WITH SystemOne



Bolt (M12) 4 8T-4176

Bolt (M12) 4 8T-4194

Washer 8 5P-1076



Bar 2 8Y-1778

Bolt (M12) 4 8T-4956

Bolt (M12) 16 8T-4192

Washer 20 5P-1076

534


973C, 973 TRACKHYBRID TRACK LARGE O.D. BUSHING

26Z, 3RZ, 32Z, 66G, 86G, 90L, 91L, BCP, LDX8.50" (215.9 mm) PITCH -- 7/8" BOLT

QUANTITYSALT PARTNUMBER


Track Links







Other Components

Pin 40 199-2794

Bushing 40 237-3790



Stopper 40 7G-4332

Plug 40 6Y-0473

Track Hardware 1

Bolt 156 7H-3599

Nut 156 7T-9825

Master Bolt 4 9W-9058

Special Sets/Groups




973C, 973 MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES


Link Asssembly Used 291-1612


535


973C, 973 TRACKLARGE O.D. BUSHING

26Z, 3RZ, 32Z, 66G, 86G, 90L, 91L8.50" (215.9 mm) PITCH -- 7/8" BOLT


Link Assembly -- 40 Section 2 6Y-2592 1

Track Links

RH Pin End Master 1 9W-9059

LH Pin End Master 1 9W-9060

RH Bushing End Master 1 9W-9061

LH Bushing End Master 1 9W-9062



Other Components

Pin 40 3P-0622




Stopper 40 7G-4332

Plug 40 6Y-0473

Track Hardware 3

Bolt 156 7H-3599

Nut 156 7T-9825


Special Sets/Groups



1 Service replaced by (1) 291-1612 Hybrid link assembly, and (5) 197-9679 Tough Steel Segments2 If small O.D. bushing required, use part number 3P-0621.3 Not part of link assembly; required to assemble track group.

536


973 TRACKHYBRID LARGE O.D. BUSHING

26Z, 32Z, 66G, 86G, 90L, 91L8.50" (215.9 mm) PITCH - 3/4" BOLT REGULAR SHOE, 7/8" BOLT MASTER SHOE



Track Links







Other Components

Pin 40 199-2794

Bushing 40 237-3790



Stopper 40 7G-4332

Plug 40 6Y-0473

Track Hardware 2

Bolt (3/4") 156 7H-3598

Nut 156 1S-1860

Master Bolt (7/8") 4 9W-9058

Special Sets/Groups




537


973 TRACKLARGE O.D. BUSHING

26Z, 32Z, 66G, 86G, 90L, 91L8.50" (215.9 mm) PITCH -- 3/4" BOLT



Track Links







Other Components

Pin 40 3P-0622




Stopper 40 7G-4332

Plug 40 6Y-0473

Track Hardware 3

Bolt 156 7H-3598

Nut 156 1S-1860


Special Sets/Groups



1 Canceled replaced by (1) 236-8179 hybrid link assembly and (5) 197-9679 sprocket segments. Refer to Special Instruction FormREHS1746 for master shoe rework.2 If small O.D. bushing required, use part number 3P-0621.3 Not part of link assembly; required to assemble track group.

538


973C ROTATING BUSHING TRACK8.50" (215.9 mm) PITCH - 7/8" BOLT



Track Links

RH Pin End Master 1 6I-9241

LH Pin End Master 1 6I-9242



RH Regular 1 39 165-1758

LH Regular 1 39 165-1759

Other Components

Pin 40 152-8080

Bushing 40 165-1770

Seal Assembly (Rigid) 160 222-6998 2


Stopper 40 7G-4332

Plug 40 6Y-0473

Track Hardware 3

Bolt 156 7H-3599

Nut 156 2S-2140

Master Bolt 2 6V-1723


1 Joint Assemblies ( include link and insert). Insert not serviced2 Serviced Replaced By: 239-7943.3 Not part of link assembly; required to assemble track group.

539


973C, 973 TRACKHYBRID STEEL MILL

8.50" (215.9 mm) PITCH - 7/8" BOLT

QUANTITYSEALED PART

NUMBER


Track Links



Other Components

Pin 39 8E-4272


Bushing 39 247-1475



Spacer 2 8M-6238

Track Hardware 2

Bolt 160 7H-3599

Nut 160 7T-9825

1 To be used with (5) 197-9679 sprocket segments.2 Not part of link assembly; required to assemble track group

973C, 973 TRACKSTEEL MILL

8.50" (215.9 mm) PITCH -- 7/8" BOLT

QUANTITYSEALED PART

NUMBER

Link Assembly -- 40 Section 2 6Y-5905 1

Track Links



Other Components

Pin 39 8E-4272


Bushing 39 1M-3669



Spacer 2 8M-6238

Track Hardware 2

Bolt 160 7H-3599

Nut 160 7T-9825

Special Sets/Groups


1 Serviced replaced by (1) 246-5809 link assembly and (5) 197-9679 sprocket segments.2 Not part of link assembly; required to assemble track group

540


973C, 973 TRACKSTEEL MILL

8.50" (215.9 mm) PITCH -- 3/4" BOLT

QUANTITYSEALED PART

NUMBER


Track Links



Other Components

Pin 40 8E-4272

Bushing 40 1M-3669


Spacer 2 8M-6238

Track Hardware 2

Bolt 160 7H-3598

Nut 160 1S-1860

Special Sets/Groups


1 Order 38 Section 246-5808 Link assembly, remove split masters and add 3 sections.2 Not part of link assembly; required to assemble track group

973C, 973 TRACK SHOES8.50" (215.9 mm) PITCH -- 7/8" BOLT

TYPE WIDTH

REGULARSHOE PART


Single Grouser - Extreme Service 20.0" (510 mm) 1Q-4918 1Q-4919

Single Grouser - Extreme Service (Trapezoidal Opening) 20.0" (510 mm) 1Q-4689 1Q-4690

Single Grouser - Extreme Service 22.0" (560 mm) 1Q-4955 1Q-4956

Single Grouser - Extreme Service (LGP) 26.5" (675 mm) 1Q-4658 1Q-4659

Single Grouser - Extreme Service (LGP) (Trapezoidal Opening) 26.5" (675 mm) 125-9087 125-9088

Single Grouser - Moderate Service (Trapezoidal Opening) 20.0" (510 mm) 1Q-4965 1Q-4964


Double Grouser (Trapezoidal Opening) 19.7" (500 mm) 128-7743 128-7744

Double Grouser (LGP) 24.0" (610 mm) 8E-4427 1Q-4669

Double Grouser (LGP) 26.5" (675 mm) 8E-4418 8E-4419


Flat 19.7" (500 mm) 6Y-5906 --

Triple Grouser 19.7" (500 mm) 1Q-4604 8E-4417 1

1 Double Grouser Shoe

541


973C, 973 TRACK SHOESROTATING BUSHING TRACK

8.50" (215.9 mm) PITCH -- 7/8" BOLT


Extreme Service (Trapezoidal Opening) 22.0" (560 mm) 9Z-9261 1


Extreme Service (Trapezoidal Opening) 24.0" (610 mm) 9Z-9263

Double Grouser 20.0" (510mm) 170-3823

Double Grouser 27.0" (675mm) 170-3827

1 Service replaced by 330-7667.

973 HYBRID TRACK SHOESUSE WITH TRACK LINKS 233-0385, 233-0386

8.50" (215.9 mm) PITCH 3/4" BOLT REGULAR SHOE, 7/8" BOLT MASTER SHOE

TYPE WIDTH

REGULARSHOE PART


Single Grouser - Extreme Service 20.0" (510 mm) 5S-6909 1Q-4919



Double Grouser (LGP, Trapezoidal Opening) 22.0" (560 mm) 8E-4432 263-9759



TYPE WIDTH

REGULARSHOE PART


Single Grouser - Extreme Service 20.0" (510 mm) 5S-6909 3P-0619

Single Grouser - Moderate Service 18.0" (460 mm) 6P-3068 6P-3069



Double Grouser (Trapezoidal Opening) 1 18.0" (460 mm) 8E-4436 8E-4437

Double Grouser (LGP, Trapezoidal Opening) 2 22.0" (560 mm) 8E-4432 8E-4433


Steel Mill Flat 19.7" (500 mm) 6T-0729 --

1 Replaces former 20" (510 mm) 3P-7384/68 shoes; refer to IRM UC93-14 for details.2 Replaces former 27" (685 mm) 7P-4009/3908 shoes; refer to IRM UC93-14 for details.

542


973C, 973 SPROCKETS8.50" (215.9 mm) PITCH


Sprocket Segment (5 Tooth) (Tough Steel) 5 197-9679

Bolt 20 282-3655

Nut 20 7H-3608

973C, 973 IDLERS



Other Components


Bearing 1 1 8P-6651

Shaft 1 8E-9562



O-Ring 1 1 9W-1058


Bolt 12 9B-7237

Washer 12 8T-4896

Stopper 1 7G-4332

Plug 1 6Y-0473

Lock 2 5M-5000

Bolt 2 7X-0310

Washer 2 7X-0563






O-Ring 1 1 9W-1057

Seal -- Bushing O-Ring 2 9M-9729

Stopper 1 3T-3800

Plug 1 3T-3799


543


973C, 973 CARRIER ROLLERS


Group 4 1P-8717

Components of Group


Shaft 1 1P-8715

Cup 2 9S-3581

Cone 2 9S-3582

Ring 1 7H-4574

Cover 1 5M-2043


Plug 1 2P-0347

Bolt 3 0S-1594

Plate 1 8P-6188

Bolt 2 6V-4791










Seal--Cover (Steel Mill) 1 2P-3538

Seal--Shaft (Steel Mill) 1 1S-2174





544


973C, 973 TRACK ROLLERSCURRENT METRIC MOUNTING HARDWARE, END COLLARS

3RZ, 86G1087-UP




Components of Group




Bearing 3 1 8P-6651

Shaft 1 118-1628





Toric Ring 3 2 162-2166



Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 4

Bolt (24 mm) 4 6V-8133

Washer (24 mm) 4 6V-8237


Double Flange (DF) (Steel Mill) 8 129-5030 1

Single Flange (SF) (Steel Mill) 6 129-5029 2







1 Serviced Replaced By: 1 - Roller Group (DF) 323-5928, 2 - End Cap 222-7244, 4 - Bolt 8T-0666, 4 - Washer 6V-8237.2 Serviced Replaced By: 1 - Roller Group (SF) 323-5925, 2 - End Cap 222-7244, 4 - Bolt 8T-0666, 4 - Washer 6V-8237.3 Component of preceding assembly or group; quantity shown is per assembly or group.4 These components are not included in the roller group; quantities shown are required to mount each roller.

545


973 TRACK ROLLERSFORMER INCH MOUNTING HARDWARE, END COLLARS

26Z, 32Z, 66G, 86G1-1086, 90L, 91L





Components of Group



Roller Shell (TFD) 1 124-8259 4


Bearing 5 1 8P-6651

Shaft 1 118-1628





Toric Ring 5 2 161-2166



Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 6

Bolt (7/8") 4 1D-4629

Washer (7/8") 4 9H-1031








1 Serviced Replaced By: 1 - Roller Group (DF) 323-5928, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.2 Serviced Replaced By: 1 - Roller Group (SF) 323-5925, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.3 Optional DF roller for guiding; use quantity required for specific roller frame type.4 Serviced Replaced By: 1 - Roller Group (DF) 323-5931, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.5 Component of preceding assembly or group; quantity shown is per assembly or group.6 These components are not included in the roller group; quantities shown are required to mount each roller.

546


973 TRACK ROLLERSFORMER BOLT-ON RETAINER

90L, 91L, 86G223-UP, 66G788-UP, (Inc. 66G786)


Double Flange (DF) 8 -- 1

Single Flange (SF) 6 -- 2

Components of Group



Bearing 3 2 9W-9498

Shaft 1 3T-7392

Retainer 2 9W-6632



Bolt 12 0S-1595

Washer 12 5P-8245



O-Ring 3 1 6V-2701


Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 5

End Cap (7/8") 2 6T-5114

Bolt (7/8") 4 2H-3856

Washer (7/8") 4 4M-6953

End Cap (24 mm) 2 6Y-6116

Bolt (24 mm) 4 8T-0667

Washer (24 mm) 4 6V-8237




O-Ring 3 1 8T-2272

Retainer 2 4S-5898

Stopper 1 3T-3800

Plug 1 3T-3799

1 Serviced Replaced By: 1 - Roller Group (DF) 323-5928, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.2 Serviced Replaced By: 1 - Roller Group (SF) 323-5925, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.3 Component of preceding assembly or group; quantity shown is per assembly or group.4 Use (1) 9G-9341 Thrust Washer and (4) 2H-1190 Dowels to repair former 9W-6633 Retainer Assembly. Do not drill and dowel new8E-7510 Thrust Washer. See Special Instruction SEHS8515.5 These components are not included in the roller group; quantities shown are required to mount each roller.

547


973 TRACK ROLLERSEARLY INCH MOUNTING HARDWARE

26Z, 32Z, 86G1-222, 66G1-787 (Exc. 66G786)




Components of Group




Bearing 3 1 8P-6651

Shaft 1 118-1628 4


Bolt 12 2P-3201

Ring 2 6H-2953





Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 6

Bolt 4 1D-4629

Washer 4 9H-1031










1 Serviced Replaced By: 1 - Roller Group (DF) 323-5928, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.2 Serviced Replaced By: 1 - Roller Group (SF) 323-5925, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.3 Component of preceding assembly or group; quantity shown is per assembly or group.4 Replaces former 9S-0313 shaft; requires 2 -- 9S-0312 end collars.5 If 9S-0313 shaft is used, use 1 -- 9S-0312 and 1 -- 9S-0311 end collar.6 These components are not included in the roller group; quantities shown are required to mount each roller.

548


973C, 973 END GUIDING GUARDSCURRENT MODEL, LUBRICATED SWING LINK, METRIC HARDWARE






Bolt 16 7X-2562

Washer 16 8T-4123


973C, 973 TRACK GUIDING GUARDS (REAR SPROCKET)




Bolt 16 8T-4649

Washer 16 8T-4167

Spacer 2 7P-5952

Rod 2 3W-8344

Nut 4 8T-4131

Washer 4 8T-4123

Plate (Wear) 4 3W-8339

Bolt 16 8T-5460

Washer 16 8T-4123

Guard Assembly (RH Outer) 1 8Y-1728

Guard Assembly (RH Inner) 1 8Y-1730

Guard Assembly (LH Outer) 1 8Y-1729

Guard Assembly (LH Inner) 1 8Y-1731

Bolt 24 8T-4956

Washer 24 5P-1076

Bolt 4 7X-2562

Bolt 4 7X-2564

Washer 8 8T-4123

549


973C/B END GUIDING GUARDSUSE WITH ROTATING BUSHING TRACK






Bolt 8 7X-2562

Bolt 8 8T-5460

Washer 16 8T-4123


973C/B TRACK GUIDING GUARDS (REAR SPROCKET)USE WITH ROTATING BUSHING TRACK




Bolt 16 8T-4649

Washer 20 8T-4167

Spacer 2 198-9059

Rod 2 3W-8344

Nut 4 8T-4131

Washer 36 8T-4123

Plate (Wear) 4 192-2549

Bolt 8 8T-5460





Bolt 24 8T-4956

Washer 24 5P-1076

Bolt 4 7X-2576

Bolt 16 8T-4141

550


973 END GUIDING GUARDS (FRONT)FORMER MODEL, LUBRICATED SWING LINK, INCH HARDWARE






Bolt 12 7X-0380

Bearing 4 3W-8240

973 END GUIDING GUARDS (REAR)FORMER MODEL, NARROW MOUNTING BOLT PATTERN, INCH HARDWARE



Right Outer 1 3W-7675

Left Outer 1 3W-7684

Right Inner 1 3W-7691

Left Inner 1 3W-7687

Bolt 2 7X-0368

Washer 2 8T-4994

Bolt 16 7X-0385

Washer 16 8C-6913


Bolt 20 8T-9398

Washer 20 8T-4994

973 END GUIDING GUARDS (FRONT)EARLY MODEL, NON-LUBRICATED SWING LINK, INCH HARDWARE






Bolt 12 2H-3757

Bearing 4 8G-0980

551


973 END GUIDING GUARDS (REAR)EARLY MODEL, INCH HARDWARE (1ST PROD 1985)



Right Outer 1 3W-7774

Left Outer 1 3W-7772

Right Inner 1 3W-7773

Left Inner 1 3W-7771

Bolt 4 1D-4609

Washer 4 5P-8248

Bolt 16 1D-4628

Washer 16 5P-8249


Bolt 20 1A-0458

Washer 20 5P-8248

973C, 973 TRACK ROLLER GUARDSCURRENT MODEL, METRIC HARDWARE




Spacer 12 7P-5952

Rod 12 8Y-1775

Washer 24 8T-4123

Nut 24 8T-4131

Bolt 24 8T-5878

Washer 24 8T-4167

Boss 24 1K-7183


Plate (Front) 2 8Y-1773

Plate (Front) 2 8Y-1774

Bolt 4 8T-5460

Bolt 8 8T-6430

Bolt 12 7X-2563

Plate (Guide) 4 8Y-1772

Bolt 8 8T-6430

Washer 32 8T-4123

552


973 TRACK ROLLER GUARDSFORMER MODEL, INCH HARDWARE




Spacer 12 7P-5952

Rod 12 8G-2049

Washer 24 8T-4994

Nut 24 6V-8182

Bolt 32 7X-0384

Washer 32 8C-6913

Boss 32 1K-7183





Bolt 8 8T-9399

Bolt 8 7X-0380

Bolt 8 7X-0382

Plate (Guide) 4 8G-6048

Washer 24 8C-6913

553


977 SEALED AND LUBRICATED HYBRID TRACK11K5959-UP, 14X, 48J1281-UP, 70J2772-UP

8.50" (215.9 mm) PITCH -- 3/4" BOLT REGULAR SHOE, 7/8" BOLT MASTER SHOE



Track Links







Other Components

Pin 39 199-2794

Bushing 39 237-3790



Stopper 39 7G-4332

Plug 39 6Y-0473

Track Hardware 2

Bolt (3/4") 152 7H-3598

Nut 152 1S-1860

Master Bolt (7/8") 4 9W-9058

Special Sets/Groups




554


977 SEALED AND LUBRICATED TRACK11K5959-UP, 14X, 48J1281-UP, 70J2772-UP

8.50" (215.9 mm) PITCH -- 3/4" BOLT



Track Links







Other Components

Pin 39 3P-0622

Bushing 39 3P-0621



Stopper 39 7G-4332

Plug 39 6Y-0473

Track Hardware 2

Bolt 152 7H-3598

Nut 152 1S-1860


Special Sets/Groups

Bushing and Seal Group (38 Sections) 1 6I-8060 3


1 Serviced replaced by (1) 239-6881 link assembly and (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746 formaster shoe rework.2 Not part of link assembly; required to assemble track group.3 Contains Extended Wear Life Bushings (8E-5258).

555


977 SEALED TRACK11K5959-UP, 14X, 48J1281-UP, 70J2772-UP

8.50" (215.9 mm) PITCH -- 3/4" BOLT


Link Assembly -- 39 Section 1 2 - 2

Track Links







Other Components

Pin 39 8E-4272

Bushing 39 1M-3669

Seal (Sealed) 156 8M-6239

Track Hardware 3

Bolt 152 7H-3598

Nut 152 1S-1860


Special Sets/Groups


1 Steel Mill Applications2 Order 38 Section 246-5808 and add 1 section.3 Not part of link assembly; required to assemble track group.

556


977 EXTENDED WEAR LIFE TRACK 1

LARGE O.D. BUSHING8.50" (215.9 mm) PITCH -- 3/4" BOLT



Track Links







Other Components

Pin 39 3P-0622




Stopper 39 7G-4332

Plug 39 6Y-0473

Track Hardware 4

Bolt 152 7H-3598

Nut 152 1S-1860


Special Sets/Groups



1 NOTE: Extended wear life link assemblies require special rollers and idlers to match the high rail link; refer to roller and idler sectionsfor details.2 Order 38 Section 239-6882 and add 1 section.3 If small O.D. Bushing required, use part number 3P-0621.4 Not part of the link assembly; required to assemble track group.

557


977 SEALED ONE PIECE MASTER LINK20A2509-UP, 53A, 46H, 48J1-1280, 70J1-2771, 11K1-5958

8.00" (203.2 mm) PITCH -- 3/4" BOLT



Track Links



Other Components

Pin 40 6B-5882


Bushing 40 8M-7289



Spacer 2 8M-7290

Track Hardware 2

Bolt 164 1S-1859

Nut 164 1S-1860

Special Groups


1 If 40 section link assembly is required order 1S-6943 and remove one section.2 Not part of link assembly; required to assemble track group

558


977 SEALED AND LUBRICATED TRACK20A1-2508

6.91" (175.5 mm) PITCH -- 5/8" BOLT


Link Assembly -- 44 sections 2 -- 1

Track Links







Other Components

Pin 44 160-7818 2

Bushing 44 7T-4636 3



Stopper 44 5G-2247

Plug 44 6Y-0473

Track Hardware 4

Bolt 172 7H-3597

Nut 172 1M-1408


Special Sets/Groups



1 Order 154-3676 link assembly and remove two sections.2 Former pin 3P-3880, replaced by, 1-160-7818 pin, 1-5G-2247 stopper, 1-6Y-0473 plug.3 Large O.D. bushings.4 Not part of the link assembly; required to assemble track group.

559


977 SEALED TRACK20A1-2508

6.91" (175.5 mm) PITCH -- 5/8" BOLT


Link Assembly -- 44 sections 2 -- 1

Track Links







Other Components

Pin 44 6B-5502

Bushing 44 5S-0710

Seal (Sealed) 176 5S-0709

Track Hardware 2

Bolt 172 7H-3597

Nut 172 1M-1408


Special Sets/Groups


1 Order 3P-5762 link assembly and remove two sections.2 Not part of the link assembly; required to assemble track group.

977 HYBRID TRACK SHOESUSE WITH TRACK LINKS 233-0385, 233-0386

8.50" (215.9 mm) PITCH 3/4" BOLT REGULAR SHOE, 7/8" BOLT MASTER SHOE

TYPE WIDTH

REGULARSHOE PART





TYPE WIDTH

REGULARSHOE PART





Triple Grouser 18.0" (460 mm) 8S-4468 8E-4437 1

Steel Mill Flat 16.0" (405 mm) 7T-1312 7T-1313

1 Double grouser master.

560





Triple Grouser (Center Punched Slots) 18.0" (460 mm) 8S-4468


TYPE WIDTH

REGULARSHOE PART





977 SPROCKETS11K5959-UP, 14X

8.50" (215.9 mm) PITCH


Sprocket Hub 1 8P-0622 1



Bolt 20 282-3655

Nut 20 7H-3608

1 Service Replaced by Classic 288-8731.

977 SPROCKETS11K2960-5958

8.00" (203.2 mm) PITCH



Sprocket Segment (3Tooth) 9 6Y-5026

Adapter Ring 2 1 3S-8252

Bolt 27 282-3655

Nut 27 7H-3608

1 Service Replaced by Classic 224-1312.2 Uses 8.50" (215.9 mm) Pitch Sprocket Segments; used to convert 8.00" (203.2 mm) Pitch machines

561


977 SPROCKETS46H, 11K1-2959

8.00" (203.2 mm) PITCH



Sprocket Segment (3 Tooth) 9 6Y-5026


Bolt 27 282-3655

Nut 27 7H-3608

1 Service replaced by Classic 224-1310.2 Uses 8.50" (215.9 mm) Pitch Sprocket Segments; used to convert 8.00" (203.2 mm) Pitch machines

977 SPROCKETS53A

8.00" (203.2 mm) PITCH





Rim 1 3S-7090

Bolt 26 282-3655

Nut 26 7H-3608

1 Uses 8.50" (215.9 mm) Pitch Sprocket Segments; used to convert 8.00" (203.2 mm) Pitch machines

977 SPROCKETS20A

6.91" (175.5 mm) PITCH






Rim 1 5S-4822

Bolt 27 3S-8182

Nut 27 7H-3607

1 Service replaced by Classic 227-4769.

562


977 IDLERSCURRENT MODEL

11K, 14X, 46H, 48J, 70J


Standard Idler Assembly 2 1S-8186

Extended Wear Idler Assembly 1 2 277-4492

Other Components


Bearing 2 1 8P-6651

Shaft 1 9M-9758








Bolt 12 3B-1915

Washer 12 3B-4506

Plug 1 2P-0347

Lock 2 5M-5000






1 For use with Extended Wear Life Track2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

563


977 IDLERSFORMER MODEL11K, 46H, 48J, 70J


PART NUMBER

Standard Idler Assembly 2 1S-8186


Other Components


Bearing 2 1 8P-6651

Shaft 1 8M-0343








Bolt 12 3B-1915

Washer 12 3B-4506

Plug 1 2P-0347

Lock 2 8M-0344






1 For use with Extended Wear Life Track2 Component of preceding assembly or group; quantity shown is quantity per assembly or group

564


977 IDLERS20A3044-UP, 53A


Standard Idler Assembly 2 9H-8489


Other Components


Bearing 2 1 8P-6651

Shaft (Standard) 1 5M-2466

Shaft (Optional) 1 8M-0343








Bolt 12 3B-1915

Washer 12 3B-4506

Plug 1 2P-0347






1 For use with Extended Wear Life Track2 Component of preceding assembly or group; quantity shown is quantity per assembly or group

565


977 CARRIER ROLLERS11K4184-UP, 14X


Group 4 1P-8717

Components of Group


Shaft 1 1P-8715

Cup 2 9S-3581

Cone 2 9S-3582

Ring 1 7H-4574

Cover 1 5M-2043


Plug 1 2P-0347

Bolt 3 0S-1594

Plate 1 8P-6188

Bolt 2 6V-4791














Toric Ring 1 2 162-2166


566


977 CARRIER ROLLERS11K1-4183, 20A2509-UP, 46H


Group 4 -- 1

Components of Group


Shaft 1 4S-9692

Cup 2 7H-4566

Cone 2 7H-4573

Ring 1 7H-4574

Cover 1 9M-0632



Plug 1 2P-0347

Bolt 4 0S-1594

Ring 1 8H-5412

Nut 1 8H-5411





Seal -- Shaft O-Ring 1 1S-8947





1 Upgrade to 1P-8717 group.2 Service replaced by 188-5612.3 Component of preceding group; quantity shown is the quantity per group.

567


977 CARRIER ROLLERS20A1-2508


Group 4 5A-8374

Components of Group


Shaft 1 3T-3207

Cup 2 9S-3581

Cone 2 9S-3582

Ring 1 1M-7914

Cover 1 5M-2043

Collar Assembly 1 9S-3567

Plug 1 2P-0347

Bolt 3 0S-1594

Plate 1 8P-6188

Bolt 2 5K-9107










568


977 TRACK ROLLERS11K5959-UP, 14X, 46H




Extended Wear Life (DF) 3 8 118-1637 1


Components of Group






Bearing 4 1 8P-6651

Shaft 1 118-1628 5


Bolt 12 2P-3201

Ring 2 6H-2953





Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 7

Bolt (7/8") 4 1D-4629

Washer 4 9H-1031






1 Serviced Replaced By: 1 - Roller Group (DF) 323-5928, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.2 Serviced Replaced By: 1 - Roller Group (SF) 323-5925, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.3 For use with Extended Wear Life Track.4 Component of preceding assembly or group; quantity shown is per assembly or group.5 Replaces former 9S-0313 shaft.6 If 9S-0313 shaft is used, use 1 -- 9S-0312 and 1 -- 9S-0311 end collar.7 These components are not included in the roller group; quantities shown are required to mount each roller.

569


977 TRACK ROLLERS11K1-5958, 46H, 53A2259-UP






Components of Group






Bearing 4 1 8P-6651

Shaft 1 118-1628 5


Bolt 12 2P-3201

Ring 2 6H-2953





Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 7

Bolt (3/4") 4 1D-4609

Washer 4 5H-1504






1 Service replaced by 188-52582 Service replaced by 188-52573 For use with Extended Wear Life Track.4 Component of preceding assembly or group; quantity shown is per assembly or group.5 Replaces former 7M-5109 shaft.6 If 7M-5109 shaft is used, use 1 -- 7M-5112 and 1 -- 7M-5111 end collar.7 These components are not included in the roller group; quantities shown are required to mount each roller.

570


977 TRACK ROLLERS20A3043-UP, 53A1-2258






Components of Group






Bearing 2 1 8P-6651

Shaft 1 5M-1732



Bolt 12 2P-3201

Ring 2 6H-2953





Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 3

Bolt (5/8") 4 0S-2318

Washer 4 3B-4510






1 For use with Extended Wear Life Track.2 Component of preceding assembly or group; quantity shown is per assembly or group.3 These components are not included in the roller group; quantities shown are required to mount each roller.

571


977 END GUIDING GUARDS46H, 48J, 70J, 11K





Bolt 4 0S-1566





Bolt 4 0S-1566


Rear (Outer RH)



Bolt 4 0S-1566


Rear (Outer LH)



Bolt 4 0S-1566


977 FINAL DRIVE GUARDS14X1950-UP


Guard Assembly (RH) 1 8P-8489

Guard Assembly (LH) 1 8P-8490

Spacer 10 2A-0047

Bolt 10 1A-8537

977 FINAL DRIVE GUARDS11K, 14X1-1949, 48J


Guard Assembly (RH) 1 1P-8852

Guard Assembly (LH) 1 1P-8851

Bolt 10 0S-1566


572


983 SEALED AND LUBRICATED TRACK38K, 58K

9.00" (228.6 mm) PITCH -- 7/8" BOLT



Track Links







Other Components

Pin 42 2P-9486 4

Bushing 42 2P-9484 5



Stopper 42 7G-4332

Plug 42 6Y-0473

Track Hardware 7

Bolt 164 7H-3599

Nut 164 2S-2140


Special Sets/Groups


Bushing and Seal Group (41 Sections) 1 9W-8936

1 If 41, 42, section link assemblies are required order 188-5310 and add appropriate number of sections.2 Service Replaced by 188-5531.3 Service Replaced by 188-5532.4 Service Replaced by 188-5710.5 Serviced Replaced By Classic 188-5658.6 Service replaced by 188-5689.7 Not part of link assembly; required to assemble track group

573


983 SEALED TRACK38K, 58K

9.00" (228.6 mm) PITCH -- 7/8" BOLT



Track Links







Other Components

Pin 42 1M-1455

Bushing 42 8M-2619 4

Seal (Sealed) 168 8M-2620

Track Hardware 5

Bolt 164 7H-3599

Nut 164 2S-2140


Special Sets/Groups


1 If 41, 42, section link assemblies are required order 188-5310 and add appropriate number of sections.2 Service Replaced by 188-5531.3 Service Replaced by 188-5532.4 Serviced Replaced By 290-0844.5 Not part of link assembly; required to assemble track group


TYPE WIDTH

REGULARSHOE PART


Single Grouser - Extreme Service 20.0" (510 mm) 7S-9096 1 8S-0390 2

Single Grouser - Extreme Service 22.0" (560 mm) 7S-9093 3 8S-0391 4

Single Grouser - Moderate Service 22.0" (560 mm) 2S-6345 3 8S-0385 4

Double Grouser 22.0" (560 mm) 2P-4092 2P-4093

1 Service replaced by 281-6370.2 Service replaced by 281-6371.3 Service replaced by 188-5617.4 Service replaced by 188-5618.

574


983 SPROCKETS9.00" (228.6 mm) PITCH



Sprocket Segment (3 Tooth) 9 6T-6782 1

Mud/Snow Segment (3 Tooth) 9 9W-7259 1

Bolt 27 9S-2727

Nut 27 7H-3609

1 Serviced Replaced By: 188-5641.

983 IDLERS



Other Components


Bearing 2 1 8P-6650

Shaft 1 9S-4324

Bearing Block 1 9S-4325

Bearing Block 1 9S-4326






Bolt 12 0S-1585

Washer 12 3B-4508

Plug 1 2P-0347

Pin (Lock) 2 1S-3513

Bolt 2 1A-1460





1 Service Replaced by Classic part number 188-5610.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

575


983 CARRIER ROLLERSOUTSIDE MOUNT


Group 4 8P-6256 1

Components of Group


Shaft 1 8P-6255

Cup 2 7K-5448

Cone 2 7K-5449

Ring 1 9H-7759

Cover 1 5M-2043


Plug 1 2P-0347

Bolt 3 0S-1594

Plate 1 3T-6269

Bolt 2 6F-7030

Lock Nut 1 0T-0329









1 Service replaced by 188-5612.2 Component of preceding group; quantity shown is the quantity per group

576


983 CARRIER ROLLERSINSIDE MOUNT


Group 4 -- 1

Components of Group

Roller Shell 1 9S-8304 2

Shaft 1 8M-0383

Cup 2 6Y-7652

Cone 2 4B-7255

Ring 1 9H-7759

Cover 1 5M-1669



Plug 1 2P-0347

Bolt 4 0S-1594

Lock Nut 1 8H-6392











1 Use 188-5612 group for service replacement.2 Service Replaced by Classic Carrier Roller Group part number 188-5612.3 Service replaced by 188-5612.4 Component of preceding group; quantity shown is the quantity per group

577


983 TRACK ROLLERS




Components of Group



Bearing 1 2 9S-4540

Shaft 1 123-1191

Retainer 2 8P-5394



Bolt 24 0S-1587

Washer 24 3H-7654





Ring 2 6H-6237

Stopper 1 7G-4332

Plug 1 6Y-0473

Lock 1 1 8F-1190

Plug 1 1 2P-0347

Mounting Hardware 2

Bolt 4 1D-4630

Washer 4 9H-1031






Seal -- Retainer O-Ring (Steel Mill) 2 4S-5898


1 Component of preceding assembly or group, quantity per assembly or group.2 These components are not included in the roller group; quantities shown are required to mount each roller.

578







Bolt 4 0S-1973

Washer 4 5P-8249




Bolt 4 0S-1973

Washer 4 5P-8249

Rear (Outer RH)



Bolt 4 0S-1973

Washer 4 5P-8249

Rear (Outer LH)



Bolt 4 0S-1973

Washer 4 5P-8249





Bolt 16 0S-1592

Bolt 8 1D-4630

Washer 16 3B-4510

Spacer 8 6K-6444

983 FINAL DRIVE GUARDS


Guard 2 2S-0278

Bolt 12 1S-0454

Washer 12 5P-8249

579

ClassicINDEX

ClassicMODELS PAGE NO.

D3G/C, D4G/C, 935, 933, 931 580.................................................................................D5B, D6, 951, 955 583...................................................................................................D6D, D6C, 955L 586......................................................................................................D7G, D7F, 977L 590......................................................................................................320BL, 320B, 320L, 320 593..........................................................................................

580

ClassicD3G/C, D4G/C, 935, 933, 931

D3G/C, D4G/C, 935, 933, 931 TRACK SALT6.125" (155.6 MM) PITCH - 9/16" BOLT

CLASSICPART NUMBER

CATPART NUMBER

Link Assembly - 36 Section 257-1994 323-8758





Track Links

RH Master Link (Split Master Complete) 257-7767 --

LH Master Link (Split Master Complete) 257-7768 --

RH Regular 257-7765 6Y-0935

LH Regular 257-7766 6Y-0936

Other Components

Pin 257-7769 303-9455

Bushing 257-7770 188-6246

Seal Assembly 257-7771 250-4002

Thrust Ring 257-7772 6S-9049

Stopper Use Cat 5G-2247

Plug Use Cat 6Y-0473

Track Hardware 1

Nut Use Cat 7K-2017

Bolt Use Cat 4K-7038

Master Bolt (Included in Link Assembly) 257-7773 5A-3187

1 Not part of link assembly;required to assemble track group.

581

ClassicD3G/C, D4G/C, 935, 933, 931

D3G/C, D4G/C, 935, 933, 931 TRACK SEALED6.125" (155.6 mm) PITCH - 9/16" BOLT

CLASSICPART NUMBER

CATPART NUMBER

Link Assembly - 36 Section 261-8008 6Y-1711

Link Assembly - 39 Section 257-1993 6Y-1713


Track Links

RH Master Link (Split master Complete) 257-7767 --


RH Regular 257-7765 6Y-0935

LH Regular 257-7766 6Y-0936

Other Components

Pin 257-7775 6B-5278

Bushing 257-7776 6Y-1717

Seal Washer 257-7777 6S-3146

Track Hardware 1

Bolt Use Cat 4K-7038

Nut Use Cat 7K-2017

Master Bolt (Included in Link Assembly) 257-7773 5A-3187


D3G/C, D4G/C, 935, 933, 931 TRACK SHOES6.125" (155.6 MM) PITCH - 9/16" BOLT

TYPE WIDTHCLASSIC

PART NUMBERCAT

PART NUMBER

Moderate Service (Clipped Grouser) 16.0" (405 mm) 275-3564 6Y-1381

Moderate Service Master (Clipped Grouser) 16.0" (405 mm) 275-3565 6Y-1382





D3G/C, D4G/C, 935, 933, 931 SPROCKETS6.125" (155.6 MM) PITCH

(PER SIDE)CLASSIC

PART NUMBERCAT

PART NUMBER

Sprockets

Segment Gp. (Contains 5 segments - No hardware) 275-3576 -- 1

Segment Bolt - 1/2" (5 bolts required per segment) Use Cat 9W-9265

Segment Nut 2 Use Cat 8H-5724

Segment Washer 2 Use Cat 5P-8245

1 Order 5 segments 190-73962 Not required for Hystat machines (only bolts).

582

ClassicD3G/C, D4G/C, 935, 933, 931

D3G/C, D4G/C, 935, 933, 931 TRACK ROLLERSS,CARRIER ROLLERS, IDLERS

CLASSICPART NUMBER

CATPART NUMBER

Track Rollers

Track Roller Group - SF 275-3579 281-8339

Track Roller Group - DF 275-3580 281-8338

Mounting Bolts - 12 mm (D4G/D3G) Use Cat 6V-8197

Mounting Washers - (D4G/D3G) Use Cat 2M-0849

Mounting Bolts - 1/2" (D4C/D3C) Use Cat 0S-1585

Mounting Washers - (D4C/D3C) Use Cat 2M-0849

Carrier Rollers

Carrier Roller Group 275-3578 6S-3609

Idlers

Idler Group (With Brackets)(D4G/D3G) 275-4086 - 1

Idler Group (With Brackets) (D4C/D3C) 275-3581 - 2

1 Idler Groups 184-6590 or 184-65912 Idler Group 164-1047

583

ClassicD5B, D6, 951, 955

D5B, D6, 951, 955 TRACK SALTD5B: 51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X, 23X, 24X,

25X, 26X, 43X, 44X, 45X, 46X, 47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 6R, 12R, 68J955: 31J, 48H, 57J, 60A, 61H, 64J1-9257, 71J1-5831, 72A, 77A, 85J1-10128, 93A,

951: 15F, 19H, 32F, 44Z, 69H1869&UP, 72J, 78Y, 79H, 86J1992&UPD6B: 37A, 44A, 8U, 9U

6.91" (175.4 mm) PITCH - 5/8" BOLT

NEW CLASSICPART NUMBER

CATPART NUMBER

Link Assembly - 39 Section 257-8020 1 154-3662




Track Links



RH Regular 257-8012 7T-4539

LH Regular 257-8013 7T-4540

Other Components

Pin 260-1507 160-7818

Bushing 260-1508 7T-4636

Seal Assembly 259-7062 250-3990

Thrust Ring 188-5773 3P-3878



Track Hardware 2

Bolt 175-8552 7H-3597

Nut 200-9150 1M-1408

Master Bolt (Included in Link Assembly) 200-9133 3P-2274

1 Classic link assemblies have EWL link height of 109mm2 Not part of link assembly; required to assemble track group.

584


D5B, D6, 951, 955 TRACK SEALEDD5B: 51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X, 23X, 24X,

25X, 26X, 43X, 44X, 45X, 46X, 47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 6R, 12R, 68J955: 31J, 48H, 57J, 60A, 61H, 64J1-9257, 71J1-5831, 72A, 77A, 85J1-10128, 93A,

951: 15F, 19H, 32F, 44Z, 69H1869&UP, 72J, 78Y, 79H, 86J1992&UPD6B: 37A, 44A, 8U, 9U

6.91" (175.5mm) PITCH - 5/8" BOLT


CATPART NUMBER

Link Assembly - 46 Section (with split master links) 257-8022 1 3P-5762


Track Links



RH Regular 257-8012 7T-4539

LH Regular 257-8013 7T-4540

Other Components

Pin 175-8923 6B-5502

Bushing 260-1512 5S-0710

Seal Washer 188-5765 5S-0709

Track Hardware 2

Bolt 175-8552 7H-3597

Nut 200-9150 1M-1408


Special Sets/Groups

Pin and Bushing Group (40 Sections sealed track) -- --

Pin and Bushing Group (46 Sections sealed track)) -- --

1 Classic link assemblies have EWL link height of 109mm2 Not part of link assembly; required to assemble track group.

D5B, D6, 951, 955 TRACK SHOES6.91" (175.5MM) PITCH - 5/8" BOLT

TYPE WIDTHCLASSIC

PART NUMBERCAT

PART NUMBER

Moderate Service 18.0" (460 mm) 175-8020 5S-0821

Moderate Service Master 18.0" (460 mm) 175-8021 3P-3889









Triple Grouser 15.0" (380 mm) 175-8553 3T-3690

Double Grouser Master (Use w/triple) 15.0" (380 mm) -- 8E-4725

585


D5B, D6, SPROCKETS 1

CLASSICPART NUMBER

CATPART NUMBER

Sprockets


Segment Bolt - 5/8" (3 bolts required per segment) Use Cat 3S-8182

Segment Nut Use Cat 7H-3607

1 Segments cannot be used on 951, 955 machines due to different segment bolt pattern design, use Cat genuine segments.2 Order 9 segments 185-6151

D5B, D6, 951, 955 TRACK ROLLERS, CARRIER ROLLERS, IDLERS

CLASSICPART NUMBER

CATPART NUMBER

Track Rollers

Track Roller Group - SF 175-8024 118-1611 1

Track Roller Group - DF 175-8025 118-1612 2

Mounting Bolts - 5/8" Use Cat 8S-9092

Mounting Washers - 5/8" Use Cat 5P-8247

Carrier Rollers

Carrier Roller Group 200-9185 5A-8374

Idlers

Idler Group (Complete) (Also used on 561D Pipelayer, Serial No. 54X) 200-9235 --

Idler Assembly (shell without bushings) 175-8255 8S-2560

1 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.2 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.

586

ClassicD6D, D6C, 955L

D6D, D6C, 955L TRACK SALTD6D: 3X, 4X, 5X, 6X, 19X, 20X, 30X, 31X, 32X, 33X, 74W, 75W, 1Y, 7XF

D6C: 41A, 71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J, 47J, 55J, 56J, 69J, 99J, 10K, 26K, 23U, 90B, 69U, 49W, 17R955L: 13X, 8Y, 57M, 85J10029&UP, 64J10441&UP, 71J6181&UP

8.00" (203.2 mm) PITCH - 3/4" BOLT

CLASSICPART NUMBER

CATPART NUMBER





Track Links



RH Regular 175-8256 7T-4645

LH Regular 175-8257 7T-4646

Other Components

Pin 188-5694 160-7819

Bushing (Outside Diameter 69 mm) 188-5693 3P-1109

Seal Assembly 259-7063 250-3996

Thrust Ring 188-5679 3P-1104



Track Hardware 2

Bolt 188-5633 1S-1859

Nut 188-5856 1S-1860

Master Bolt (Included in Link Assembly) 188-5634 9S-1838

1 Link assembly is similar to Extended Wear life track (bushing diameter 69 mm vs, 72 mm).2 Not part of link assembly; required to assemble track group.

587


D6D, D6C, 955L TRACK SEALEDD6D: 3X, 4X, 5X, 6X, 19X, 20X, 30X, 31X, 32X, 33X, 74W, 1Y, 7XF

D6C: 41A, 71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J, 47J, 55J, 56J, 69J, 99J, 10K, 26K, 23U, 90B, 69U, 49W, 17R955L: 13X, 8Y, 57M, 85J10029&UP, 64J10441&UP, 71J6181&UP

8.00" (203.2 mm) PITCH - 3/4" BOLT


FORMERCLASSIC

PART NUMBERCAT

PART NUMBER

Link Assembly - 36 Section (with split master links) 290-6589 --

Link Assembly - 36 Section (w/o split master links) ---


Track Links



RH Regular 175-8256 175-8256 7T-4645

LH Regular 175-8257 175-8257 7T-4646

Other Components

Pin 175-8929 175-8929 4M-5989

Master Pin 289-0639 8E-0855

Bushing 310-6654 310-6654 4M-5991

Master Bushing Use Cat 4M-5992

Seal 314-7841 314-7841 8M-7231

Spacer (Master Joint) 8M-7290

Track Hardware 1

Bolt 188-5633 188-5633 1S-1859

Nut 188-5856 188-5856 1S-1860

Master Bolt (Included in Link Assembly) 188-5634 188-5634 9S-1838

Special Sets/Groups

Pin and Bushing Group (36 Sections) (Sealed Track W/Split Master Links) 316-1443 316-1443 2 --

1 Not part of link assembly; required to assemble track group.2 If used with link assembly 175-8353, must also order the following: 1 - Master Bushing - 4M-5992, 1 - Master Pin - 8E-0855, 4 - SealWasher - 8M-7231, 2 - Spacer - 8M-7290.

588


D6D, D6C, 955L TRACK SHOES8.00" (203.2 mm) PITCH - 3/4" BOLT

TYPE WIDTHCLASSIC

PART NUMBERCAT

PART NUMBER

Moderate Service 18.0" (460 mm) 188-5270 6Y-6289

Moderate Service Master 18.0" (460 mm) 175-8728 6Y-6290







ExtremeService 20.0" (510 mm) 188-5396 6Y-6395

Extreme Service Master 20.0" (510 mm) 188-5591 6Y-6394

Extreme Service 22.0" (560 mm) 188-5397 6Y-6411


Extreme Service 24.0" (610 mm) 188-5593 6Y-6398


Double Grouser 17.0" (432 mm) 188-5381 8E-4501

Double Grouser Master 17.0" (432 mm) 188-5385 8E-4502



D6D, D6C, 955L SPROCKETS8.00" (203.2 mm) PITCH

CLASSICPART NUMBER

CATPART NUMBER

Sprockets


Segment Bolt - 5/8" (4 required per segment) Use Cat 3S-8182


Segment Gp. (Contains 5 segments - No hardware) (For machine Serial No. 6HC) 260-5851 -- 2

Segment Bolt - 3/4" (4 required per segment) Use Cat 117-1617


1 Order 5 segments 258-9797.2 Order 5 segments 117-1616.

589


D6D, D6C, 955L TRACK ROLLERS, CARRIER ROLLERS, IDLERS

CLASSICPART NUMBER

CATPART NUMBER

Track Rollers

Track Roller Group - SF (3/4" mounting bolt) 188-5272 118-1617 1

Track Roller Group - DF (3/4" mounting bolt) 188-5271 118-1618 2

Mounting Bolts - 3/4" Use Cat 1D-4608

Mounting Washers 3/4" Use Cat 5H-1504

Track Roller Gp. - SF (5/8" mounting bolt) 175-8035 118-1614 3

Track Roller Gp. - DF (5/8" mounting bolt) 175-8036 118-1615 4

Mounting Bolts - 5/8" Use Cat 1A-8537

Mounting Washer - 5/8" Use Cat 2S-0736

Carrier Rollers

Carrier Roller Group 188-5590 3T-3206

Idlers

Idler Group (Complete) 200-9236 6L-9210

Idler Group 175-8038 5 --

Idler Assembly (shell without bushings) 175-8263 7T-4562

1 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.2 Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.3 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.4 Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.5 The Idler Group 175-8038 includes shaft and bushings, (not a complete top level group) no bearing blocks. Use Caterpillar 6Y-0925Duo-Cone Seal Groups and Caterpillar bearing blocks 5M-5003/5M-5004 for final group assembly.

590

ClassicD7G, D7F, 977L

D7G, D7F, 977L TRACK SALTD7G: 64V, 65V, 91V, 92VD7F: 91E, 92E, 93N, 94N

977L: 14X, 64X, 95X, 11K5959&UP, 70J2772&UP8.50" (215.9 mm) PITCH - 3/4" BOLT

CLASSICPART NUMBER

CATPART NUMBER

Link Assembly - 38 Section (D7) 188-5595 117-1024

Link Assembly - 39 Section (977) 175-8759 3P-0628


Track Links

Link - RH Master (Split Master Complete) 188-5700 ---

Link - LH Master (Split Master Complete) 188-5701 ---

Link - RH 188-5251 8S-2589

Link - LH 188-5252 8S-2590

Other Components

Pin 188-5699 3P-0622

Bushing 188-5698 3P-0621

Seal Assembly 259-7064 250-3998

Thrust Ring 188-5721 3P-0623



Track Hardware 1

Bolt 188-5636 7H-3598

Nut 188-5856 1S-1860



591


D7G, D7F, 977L TRACK SHOE8.50" (215.9 mm) PITCH - 3/4" BOLT

TYPE WIDTHCLASSIC

PART NUMBERCAT

PART NUMBER

Moderate Service 20.0" (510 mm) 188-5333 1P-9807








Extreme Service 22.0" (560 mm) 188-5603 5S-6910

Extreme Service Master 22.0" (560 mm) 188-5604 2P-9669

Extreme Service 24.0" (610 mm) 188-5605 5S-6911

Extreme Service Master 24.0" (610 mm) 188-5606 3P-0620



Double Grouser (TRAP) 18.0" (460 mm) 188-5261 8E-4436

Double Grouser Master (TRAP) 18.0" (460 mm) 188-5262 8E-4437

D7G, D7F, 977L SPROCKETS

CLASSICPART NUMBER

CATPART NUMBER

Sprockets

Segment Gp. (Contains 5 segments - No hardware) 188-5638 --- 1

Segment Bolt - 3/4" (4 required per segment) Use Cat 282-3655


1 Order 5 segments 197-9679.

592


D7G, D7F, 977L TRACK ROLLERS, CARRIER ROLLERS, IDLERS

CLASSICPART NUMBER

CATPART NUMBER

Track Rollers

Track Roller Group - SF (7/8" mounting bolt) 188-5596 118-1623

Track Roller Group - DF (7/8" mounting bolt) 188-5597 118-1625


Mounting Washers 7/8" Use Cat 9H-1031

Track Roller Gp. - SF (3/4" mounting bolt) 188-5257 118-1619

Track Roller Gp. - DF (3/4" mounting bolt) 188-5258 118-1620


Mounting Washer - 3/4" Use Cat 5H-1504

Carrier Rollers

Carrier Roller Group 188-5600 1P-8717

Idlers

Idler Group (Complete) 200-9237 6L-9211

Idler Assembly (shell without bushings) 188-5268 1 1S-8186

1 Two different idler shafts can be used with the 188-5268 idler assembly, but idler shafts require different bearing blocks see thefollowing: Idler Shaft 8M-0343 (end diameters 63.5 mm) requires the use of 8M-0341 & 8M-0342 bearing blocks. Idler Shaft 9M-9758 (enddiameters 62.7 mm) requires the use of 7G-1901 & 7G-1902 bearing blocks.

593

Classic320BL, 320B, 320L, 320

320BL, 320B, 320L, 320 GREASE LUBRICATED TRACKSlip Fit Master

7.50" (190.5 mm) PITCH - 20 mm BOLT

CLASSICPART NUMBER

CATPART NUMBER




Track Links

RH Master Link 308-3056 8E-8585

LH Master Link 308-3057 8E-8586

RH Regular 287-3118 9W-3137

LH Regular 287-3119 9W-3138

Other Components

Pin 175-8923 6Y-8186

Master Pin 287-3231 188-3064

Bushing 289-4955 190-3523

Master Bushing 289-4956 190-3524

Cotter Pin 287-3232 095-0863

Seal - Grease 289-0646 158-4380

Spacer Use Cat 158-4381

Track Hardware 1

Bolt 286-9828 9W-3619

Nut 200-9127 9W-3361


320BL, 320B, 320L, 320 TRACK SHOES7.50" (190.5 mm) PITCH - 20 mm BOLT

TYPE WIDTHCLASSIC

PART NUMBERCAT

PART NUMBER

Triple Grouser (Center Punched Slots) 19.7" (500 mm) 335-5478 126-5061

Triple Grouser (Center Punched Slots) 23.6" (600 mm) 286-9827 126-5062

Triple Grouser (Center Punched Slots) 27.6" (700 mm) 286-9826 6I-9454

Triple Grouser (Center Punched Slots) 31.5" (800 mm) 286-9825 9W-9351

320BL, 320B, 320L, 320 SPROCKET

CLASSICPART NUMBER

CATPART NUMBER

Sprocket Rim (21 Tooth) 286-9821 8E-9805

594

Classic320BL, 320B, 320L, 320

320BL, 320B, 320L, 320 IDLER

CLASSICPART NUMBER

CATPART NUMBER

Idler Group 286-9830 248-7143

320BL, 320B, 320L, 320 CARRIER ROLLER

CLASSICPART NUMBER

CATPART NUMBER

Carrier Roller Group 286-9824 8E-5600

320BL, 320B, 320L, 320 TRACK ROLLER

CLASSICPART NUMBER

CATPART NUMBER

Track Roller Group (Single Flange) 286-9823 163-4143

595

NexusNexus

NEXUS UNDERCARRIAGETo find the most current information regarding the NEXUS Undercarriage product offering and model

coverage, please use the hotlink below to the Cat Knowledge Network > Product Service & Support > GlobalUndercarriage Information Community.

In the "GUIDES/TOOLS" section of the Community home page, a folder entitled 'NEXUS Undercarriage 2010'holds the catalog of NEXUS part details (in Excel files) for competitive makes/models still offered (by machinetype, TTT or HEX). These files can be downloaded to your PC and are formatted for easy printing. Knowledge

Network Link: https://kn.cat.com/cat.cfm?id=11053

For Additional Information Contact:- PAMELA WOLFE

(309) 675-3259 or [email protected]

597

Excavators/Front ShovelsINDEX

Excavators/Front ShovelsMODELS PAGE NO.

308D, 307D, 308C, 307C, 307B, 307 599......................................................................312D, 311D, 314C, 313C, 312C, 311C, 313B, 312B, 311B, 312, 311 614....................315D, 315C, 315B, 315 624...........................................................................................317BL, 317 631..............................................................................................................318C, 318B 636..............................................................................................................323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 643......................................323DS, 320CS, 320BS, 320S 656.................................................................................324D, 322C, 322B, 322 662...........................................................................................329D, 325D, 325C, 325B, 325 676................................................................................336D, 330D, 330C, 330B, 330, 328D 691......................................................................345D, 345C, 345B 704...................................................................................................350 713..........................................................................................................................365CL, 365BL 716..........................................................................................................375, 5080 722................................................................................................................385C, 385B, 5090 726....................................................................................................5110B 732......................................................................................................................5130B, 5130 736............................................................................................................5230 739........................................................................................................................205 742..........................................................................................................................211 750..........................................................................................................................213 757..........................................................................................................................215 765..........................................................................................................................215SA, 219, 225 779.....................................................................................................225SA, FB227, 229, 231 796.........................................................................................235 806..........................................................................................................................245 825..........................................................................................................................E70B, E70 837................................................................................................................E120B, E120, E110B, E110 841.....................................................................................E140 847........................................................................................................................E180, EL180 849............................................................................................................E200B, EL200B 852.......................................................................................................E240C, EL240C, E240B, EL240B, E240, EL240 855......................................................

598

Excavators/Front ShovelsINDEX

Excavators/Front ShovelsMODELS PAGE NO.

E300B, EL300B, E300, EL300 861.................................................................................E450 866........................................................................................................................E650 869........................................................................................................................

599

Excavators/Front Shovels308D, 307D, 308C, 307C, 307B, 307

308D TRACKJPS, HSA, GBT, FYC

6.10" (154.0 mm) PITCH - 14 mm BOLT

QUANTITYUNSEALED

PART NUMBERGREASED

PART NUMBER

Link Assembly -- 40 Section 2 323-0955 323-0956


Track Links

RH Master Link 1 136-2405 136-2405

LH Master Link 1 136-2407 136-2407

RH Links 39 136-2404 136-2404

LH Links 39 136-2410 136-2410

Other Components

Pin 39 168-6758 168-6758

Master Pin 1 323-0959 323-0959

Bushing 39 168-6755 1 168-6757 1

Master Bushing 1 168-6756 1 168-6756 1

Cotter 1 096-7033 096-7033

Spacer 2 136-2409 --

Seal (Poly - W) 78 -- 168-6759

Seal Master (Poly - W) 2 -- 168-6760

Track Hardware 2

Bolt 160 136-2401 136-2401

Nut 160 136-2402 136-2402

1 Large O.D. bushing2 Not part of link assembly; required to assemble track group

600


307D TRACKECT, DSG

6.10" (154.0 mm) PITCH - 14 mm BOLT

QUANTITYUNSEALED

PART NUMBERGREASED

PART NUMBER

Link Assembly -- 38 Section 2 323-0957 323-0958


Track Links

RH Master Link 1 136-2405 136-2405

LH Master Link 1 136-2407 136-2407

RH Links 37 136-2404 136-2404

LH Links 37 136-2410 136-2410

Other Components

Pin 37 168-6758 168-6758

Master Pin 1 323-0959 323-0959

Bushing 37 168-6755 1 168-6757 1

Master Bushing 1 168-6756 1 168-6756 1

Cotter 1 096-7033 096-7033

Spacer 2 136-2409 --

Seal (Poly - W) 74 -- 168-6759

Seal Master (Poly - W) 2 -- 168-6760

Track Hardware 2

Bolt 152 136-2401 136-2401

Nut 152 136-2402 136-2402

1 Large O.D. bushing2 Not part of link assembly; required to assemble track group

601


308C GREASE TRACKCRW

6.10" (154.0 mm) PITCH - 14 mm BOLT




Track Links

RH Master Link 1 136-2405

LH Master Link 1 136-2407

RH Links 39 136-2404

LH Links 39 136-2410

Other Components

Pin 39 168-6758


Bushing 39 168-6757


Cotter 1 096-7033

Seal (Poly - W) 78 168-6759

Seal Master (Poly - W) 2 168-6760

Track Hardware 2

Bolt 160 136-2401

Nut 160 136-2402

1 Service replaced by 323-09562 Not part of link assembly; required to assemble track group

602


308C TRACKCRW

6.10" (154.0 mm) PITCH - 14 mm BOLT




Track Links



RH Links 39 136-2404

LH Links 39 136-2410

Other Components

Pin 39 168-6758


Bushing 39 168-6755


Cotter 1 096-7033

Spacer 2 136-2409

Track Hardware 2

Bolt 160 136-2401

Nut 160 136-2402

1 Service Replaced by 323-0955.2 Not part of link assembly; required to assemble track group

603


307C/B GREASE TRACKBNE, BCM, BAJ, 4RW, 5CW, 6KZ, 7DZ

6.10" (154.0 mm) PITCH -- 14 mm BOLT




Track Links



RH Links 37 136-2404

LH Links 37 136-2410

Other Components

Pin 37 168-6758


Bushing 37 168-6757


Cotter 1 096-7033

Seal (Poly - W) 74 168-6759

Seal Master (Poly - W) 2 168-6760

Track Hardware 2

Bolt 152 136-2401

Nut 152 136-2402


604


307C/B TRACKBNE, BCM, BAJ, 4RW, 5CW, 6KZ, 7DZ

6.10" (154.0 mm) PITCH -- 14 mm BOLT

QUANTITYSEALED PART

NUMBERUNSEALED

PART NUMBER

Link Assembly -- 38 Section 2 145-2949 136-2403 1


Track Links

RH Master Link 1 136-2405 136-2405

LH Master Link 1 136-2407 136-2407

RH Links 37 136-2404 136-2404

LH Links 37 136-2410 136-2410

Other Components

Pin 37 168-6758 168-6758

Master Pin 1 323-0959 323-0959

Bushing 37 145-2951 168-6755 2

Master Bushing 1 168-6756 2 168-6756 2

Cotter 1 096-7033 096-7033

Spacer 2 145-2952 136-2409

Washer 152 145-2953 --

Track Hardware 3

Bolt 152 136-2401 136-2401

Nut 152 136-2402 136-2402

1 Service replaced by 323-09572 Large O.D. bushing3 Not part of link assembly; required to assemble track group

605


307B GREASED TRACKAFB

5.31" (135.0 mm) PITCH -- 1/2" BOLT




Track Links

RH Master Link 1 3A-9617

LH Master Link 1 3A-9616

RH Links 41 3A-9615

LH Links 41 3A-9614

Other Components

Pin 41 117-8882


Bushing 41 172-3288


Cotter 1 096-7033

Seal (Poly - W) 82 171-6767

Seal - Master (Poly - W) 2 171-6766

Track Hardware 2

Bolt 168 3A-9605

Nut 168 117-8885


606


308B, 307 TRACK42 SECTION: 2PM, 9ZL44 SECTION 2FL, 3YS

5.31" (135.0 mm) PITCH -- 1/2" BOLT

PART NUMBERSTD

42 SectionLGP

44 Section



Track Links

RH Master 096-2142 1 1

LH Master 096-2143 1 1

RH Regular 093-1969 41 43

LH Regular 093-1970 41 43

Other Components

Pin 093-0515 41 43

Master Pin 093-0517 1 1

Bushing 102-8107 41 43

Master Bushing 102-8108 1 1

Spacer 093-0036 2 2

Cotter Pin 096-7033 1 1

Track Hardware 1

Bolt 102-8072 168 176

Nut 102-8073 168 176


607


307 TRACK2WM

5.31" (135.0 mm) PITCH -- 1/2" BOLT

QUANTITYSEALED PART

NUMBERUNSEALED

PART NUMBER

Link Assembly -- 42 Section 2 171-7623 1 115-5756 1


Track Links

RH Master Link 1 3A-9617 3A-9617

LH Master Link 1 3A-9616 3A-9616

RH Links 41 3A-9615 3A-9615

LH Links 41 3A-9614 3A-9614

Other Components

Pin 41 117-8882 117-8882

Master Pin 1 117-8883 117-8883

Bushing 41 171-7624 117-8880

Master Bushing 1 117-8881 117-8881

Cotter 1 096-7033 096-7033

Spacer 2 117-8884 117-8884

Washer 164 145-2953 --

Track Hardware 2

Bolt 168 3A-9605 3A-9605

Nut 168 117-8885 117-8885


308D/C, 307D/C/B TRACK SHOESCRW, BNE, BCM, BAJ, 4RW, 5CW, 6KZ, 7DZ, JPS, HSA, GBT, FYC, ECT, DSG,

6.10" (154.0 mm) PITCH -- 14 mm BOLT


Triple Grouser (4 extra bolt holes on outer edge of shoe) 1 17.7" (450 mm) 136-2400

Triple Grouser 17.7" (450 mm) 145-2948


1 Two options available: (1) (Bolts to shoe with 4 studs) Rubber Pad Assembly 170-4419, Nut 159-6528, Washer 159-6529. (2) (Bolts toshoe with 2 bolts and clips) Rubber Pad Assembly 216-8894, Bolt 216-8895, Washer 216-8896.

308D/C TRACK RUBBER BELTS6.10" (154.0 mm) -- 14 mm BOLT

(PER SIDE) WIDTH PART NUMBER

Shoe Assembly Segment Rubber Belt (40 Section) 17.7" (450 mm) 194-1150 1

1 2 required per side, use 093-0255 bolts and 136-2402 nuts to assemble to link assembly. To replace one rubber shoe order 169-8092.

608


307D/C/B TRACK RUBBER BELTS6.10" (154.0 mm) PITCH -- 14 mm BOLT


Shoe Assembly Segment Rubber Belt (38 Section) 17.7" (450 mm) 169-8088 1

1 2 required per side, use 093-0255 bolts and 136-2402 nuts to assemble to link assembly.To replace one rubber shoe order 169-8092.

307B, 307 TRACK SHOES2WM, AFB

5.31" (135.0 mm) PITCH -- 1/2" BOLT





308B, 307 TRACK SHOES2FL, 2PM, 9ZL, 3YS

5.31" (135.0 mm) PITCH -- 1/2" BOLT


Triple Grouser (4 extra bolt holes on outer edge of shoe) 1 17.7" (450 mm) 102-8150

Triple Grouser 17.7" (450 mm) 1R-9507


1 Rubber Pad Assembly 124-7856, Nut 129-6932, Washer 124-7857

308B RUBBER BELT5.31" (135.0 mm) PITCH

3YS


Rubber Belt (Natural Rubber & Synthetic Rubber) 1 17.7" (450 mm) 139-8193

Rubber Belt (Natural Rubber) 1 17.7" (450mm) 139-8194

1 2 Per machine

307 TRACKOPTIONAL RUBBER BELT5.31" (135.0 mm) PITCH


Rubber Belt 1 17.7" (450 mm) 134-7697

1 2 Per machine

609


308D, 307D, SPROCKETSJPS, HSA, GBT, FYC, ECT, DSG

6.10" (154.0 mm) PITCH


Sprocket (21 Teeth) 1 294-8262

Bolt 15 285-6125

308C, 307C/B SPROCKETSCRW, BNE, BCM, BAJ, 4RW, 5CW, 6KZ, 7DZ

6.10" (154.0 mm) PITCH



Bolt 12 8C-3425

308B, 307B, 307 SPROCKETS2FL, 2PM, 2WM, 9ZL, AFB, 3YS

5.31"(135.0 mm) PITCH


Sprocket Rim (23 Teeth) 1 5I-9336

Bolt 12 8C-3425

308D/C/B, 307D, IDLERSCRW, JPS, HSA, GBT, FYC, ECT, DSG, 3YS

6.10" (154.0 mm) PITCH



Components of Group


Bearing 1 2 5I-6274

Shaft 1 185-9185


Pin 2 185-9160


Toric Ring 1 2 093-1364

Seal -- Shaft O-Ring 2 095-1600

Plug 1 7H-3171

1 Component of preceding assembly or group; quantity shown per assembly or group.

610


307C/B IDLERSBNE, BCM, BAJ, 4RW, 5CW, 6KZ, 7DZ

6.10" (154.0 mm) PITCH


Idler Group 2 - 1

Components of Group


Bearing 2 2 5I-6274

Shaft 1 102-8082


Pin 2 3E-4370


Toric Ring 2 2 093-1364


Plug 1 7H-3171

1 Replaced by Idler Group 277-8667.2 Component of preceding assembly or group; quantity shown per assembly or group.

307B IDLERSAFB

5.31" (135.0 mm) PITCH



Components of Group


Bearing 2 2 5I-6274

Shaft 1 102-8082


Pin 2 3E-4370


Toric Ring 2 2 093-1364


Plug 1 7H-3171

1 Service Replaced by 277-8668.2 Component of preceding assembly or group; quantity shown per assembly or group.

611


307 IDLERS5.31" (135.0 mm) PITCH


NUMBER PART NUMBER

Idler Group 2 6I-6488 115-6336

Components of Group

Idler Assembly 1 6I-6489 115-6335 1

Bearing 2 2 5I-6274 5I-6274

Shaft 1 102-8082 102-8082

Bearing Block 2 102-8084 102-8084

Pin 2 3E-4370 3E-4370


Toric Ring 2 2 093-1364 093-1364

Seal -- Shaft O-Ring 2 095-1600 095-1600

Plug 1 7H-3171 7H-3171

1 Service Replaced by 277-8668.2 Component of preceding assembly or group; quantity shown per assembly or group.

308D/C/B, 307D/C/B, 307 CARRIER ROLLERS


Group 2 277-8576

Components of Group

Roller Shell Assembly 1 136-2394

Bearing 1 2 099-6461

Shaft Assembly 1 277-8577

Retainer 1 099-6462

Cover 1 102-8079

Bolt 5 6V-8202



Plug 1 7H-3171

Mounting Hardware 2

Setscrew 1 095-1279

1 Component of preceding assembly or group.2 Not included in roller group; quantity shown is required to mount each roller.

612


308D/C/B, 307D/C/B TRACK ROLLERSCRW, BNE, BCM, BAJ, 4RW, 5CW, 6KZ, 7DZ, JPS, HSA, GBT, FYC, ECT, DSG, 3YS


Single Flange (SF) 10 1 127-3806

Components of Group

Roller Shell (SF) 1 6I-6525

Bearing 2 2 5I-6274

Shaft 1 102-8115



Dowel 2 102-8116

Pin 1 159-0049

Seal -- Group 2 136-0296

Toric Ring 2 2 136-0297

Plug - Pipe 1 3D-4603

Mounting Hardware 3

Bolt 4 6V-8336

Washer 4 5P-8245

1 12 Rollers required for the 308B (3YS).2 Component of proceeding assembly or group; quantity shown is quantity per assembly or group.3 These components are not included in the roller group; quantities shown are required to mount each roller.

613


307B, 307 TRACK ROLLERS 1

2FL, 2PM, 2WM, 9ZL, AFB



Center Flange (CF) 4 127-3807

Components of Group


Roller Shell (CF) 1 6I-6528

Bearing 2 2 5I-6274

Shaft 1 102-8115



Pin 2 102-8116


Toric Ring 2 2 136-0297


Plug 1 3D-4603

Mounting Hardware 3

Bolt 4 8T-4648

Washer 4 8T-4223

1 Machine roller sequence (measured from front of machine): SF, SF, CF, SF, CF, SF2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 These components are not included in the roller group; quantities shown are required to mount each roller.

308D, 307D, CENTER GUIDING GUARDS



Bolt (M12) 8 8T-4192

Washer 8 8T-4223

614

Excavators/Front Shovels312D, 311D, 314C, 313C, 312C, 311C, 313B, 312B, 311B, 312, 311

311D, 311C, 311B, 311 TRACKCLK, CKE, 2LS, 2MS, 5PK, 8GR, 8HR, 9LJ, AKW

6.75" (171.5 mm) PITCH -- 16 mm BOLT

(PER MACHINE) QUANTITYSEALED

PART NUMBER

FORMERPART

NUMBER

GREASEDPART

NUMBER

Link Assembly -- 41 Section 2 4I-7479 1 -- 2 176-4874


Track Links

RH Master 1 4I-7477 4I-7477 4I-7477

LH Master 1 4I-7478 4I-7478 4I-7478

RH Regular 40 4I-7475 4I-7475 4I-7475

LH Regular 40 4I-7476 4I-7476 4I-7476

Other Components

Pin 40 5I-6140 162-4305 162-4305

Master Pin 1 099-0653 099-0653 099-0653

Bushing 40 6I-6446 162-4304 162-4304

Master Bushing 1 093-1887 162-4306 162-4306

Seal (Poly - W) 80 -- 162-4307 162-4307

Seal - Master (Poly - W) 2 -- -- 176-4872

Seal (Resin) 80 4I-7473 -- --

Spacer 2 093-0037 093-0037 --

Cotter Pin 1 095-0863 095-0863 095-0863

Track Hardware 3

Bolt 164 4I-7538 4I-7538 4I-7538

Nut 164 5I-6125 5I-6125 5I-6125

1 Service Replaced by 162-4303.2 Upgrade to 176-4874.3 Not part of link assembly; required to assemble track group.

615


312D, 312C, 312B GREASED TRACK43 SECTION: 6SW0457 & UP, 9NW210 & UP, BNN, DBN, HJX

46 SECTION: 2KW0223 & UP, 9FS0682-UP,CBT6.75" (171.5 mm) PITCH -- 16 mm BOLT

PART NUMBER 43 SECTION 46 SECTION



Track Links

RH Master 180-2687 1 1

LH Master 180-2686 1 1

RH Regular 9K-6629 42 45

LH Regular 9K-6628 42 45

Other Components

Pin 9K-4060 42 45

Master Pin 180-2684 1 1

Bushing 180-2681 42 45


Seal 179-9339 84 90

Master Seal 179-9340 2 2

Cotter Pin 095-0863 1 1

Track Hardware 1

Bolt 4I-7538 172 184

Nut 5I-6125 172 184


616


312B TRACK43 SECTION: 6SW1-456, 9NW1-209

46 SECTION: 2KW1-0222, 9FS1-06816.75" (171.5 mm) PITCH -- 16 mm BOLT

SEALEDPART NUMBER

43SECTION

46SECTION



Track Links

RH Master 4I-7477 1 1

LH Master 4I-7478 1 1



Other Components

Pin 5I-6140 42 45

Master Pin 099-0653 1 1

Bushing 146-9174 42 45


Seal (Spring Washer) 5K-2707 172 184

Spacer 147-0423 2 2

Cotter Pin 095-0863 1 1

Track Hardware 1

Bolt 4I-7538 172 184

Nut 5I-6125 172 184


617


314C, 313C, 312D/C/B, 312, 311DL TRACKCAE, FDS, HGF, WSA, 2NS, 3ES, 6BL, 6GK, 6SW, 7DK, 8JR, 9GR, 9HR, 9NW, KJA, KHB, CLA, DDW, HCW, FBJ

6.75" (171.5 mm) PITCH -- 16 mm BOLT

QUANTITYGREASE

PART NUMBER

LATESTGREASE

PART NUMBER

Link Assembly -- 43 Section 2 -- 1 176-4870


Track Links

RH Master 1 4I-7477 4I-7477

LH Master 1 4I-7478 4I-7478

RH Regular 42 4I-7475 4I-7475

LH Regular 42 4I-7476 4I-7476

Other Components

Pin 42 162-4305 162-4305

Master Pin 1 099-0653 099-0653

Bushing 42 162-4304 162-4304

Master Bushing 1 162-4306 162-4306

Seal (Poly - W) 84 162-4307 162-4307

Seal - Master (Poly - W) 2 -- 176-4872

Spacer 2 093-0037 --

Cotter Pin 1 095-0863 095-0863

Track Hardware 2

Bolt 172 4I-7538 4I-7538

Nut 172 5I-6125 5I-6125

1 Upgrade to 176-4870.2 Not part of link assembly; required to assemble track group.

618


314CL, 312DL, 312CL, 312BL TRACKCBA, 3FS, PCA, JBL, KCD, TGY

6.75" (171.5 mm) PITCH -- 16 mm BOLT

QUANTITYSEALED

PART NUMBERGREASED

PART NUMBER



Track Links

RH Master 1 4I-7477 4I-7477

LH Master 1 4I-7478 4I-7478

RH Regular 45 4I-7475 4I-7475

LH Regular 45 4I-7476 4I-7476

Other Components

Pin 45 5I-6140 162-4305

Master Pin 1 099-0653 099-0653

Bushing 45 6I-6446 162-4304

Master Bushing 1 093-1887 162-4306

Seal (Poly - W) 90 -- 162-4307


Seal (Resin) 90 4I-7473 --

Spacer 2 093-0037 --

Cotter Pin 1 095-0863 095-0863

Track Hardware 2

Bolt 184 4I-7538 4I-7538

Nut 184 5I-6125 5I-6125


619


312B, 313B, 312 TRACK2NS, 3ES, 6BL, 6GK, 7DK, 8JR, 9GR, 9HR, 9PR, AEX, BAS

6.75" (171.5 mm) PITCH -- 16 mm BOLT

QUANTITYSEALED

PART NUMBER



Track Links

RH Master 1 4I-7477

LH Master 1 4I-7478

RH Regular 42 4I-7475

LH Regular 42 4I-7476

Other Components

Pin 42 5I-6140


Bushing 42 6I-6446


Seal (Resin) 84 4I-7473

Spacer 2 093-0037

Cotter Pin 1 095-0863

Track Hardware 2

Bolt 172 4I-7538

Nut 172 5I-6125

1 Upgrade to 176-4870 link assembly2 Not part of link assembly; required to assemble track group.

314C, 313C/B, 312D/C/B, 311D/C/B, 312, 311 TRACK SHOES6.75" (171.5 mm) PITCH -- 16 mm BOLT

TYPE WIDTH GROUSER HEIGHT PART NUMBER

Triple Grouser (4 extra bolt holes on outer edge of shoe) 1 19.7" (500 mm) 20 mm 137-6114

Triple Grouser 2 19.7" (500 mm) 20 mm 1R-6008




Triple Grouser 2 19.7" (500 mm) 25 mm 3A-8962




Triple Grouser 2 33.5" (850 mm) 25 mm 117-1771

Self-Cleaning 30.3" (770 mm) -- 096-0231

Flat 19.7" (500 mm) -- 096-0240

Rubber Pad 19.7" (500 mm) -- 1R-9814

1 Center Punched slots; Rubber Pad Assembly 170-4418, Nut 137-6109, Washer 137-6108.2 Center Punched slots

620


311D/C/B, 311 TRACK RUBBER BELTS


Segment Rubber Belt (41 Section) 19.7" (500 mm) - 1

1 Required per side, (1) 169-8089-shoe as., (1) 169-8090-shoe as. To replace one rubber shoe order 169-8093. Hardware use: Bolt 096-1043,Nut 5I-6125

314C, 312D/C/B, 312, 311DL TRACK RUBBER BELTS



1 Required per side, (1) 169-8089-shoe as., (1) 169-8091-shoe as. To replace one rubber shoe order 169-8093. Hardware use: Bolt 096-1043,Nut 5I-6125

314CL, 312DL, 312CL, 312BL, 312L TRACK RUBBER BELTS



1 Required per side, (2) 169-8091-shoe as. To replace one rubber shoe order 169-8093. Hardware use: Bolt 096-1043, Nut 5I-6125

313C/B, 312C/B, 312 TRACK RUBBER BELTSONE PIECE

(PER MACHINE) WIDTH QUANTITYPART

NUMBER

Belt (One Piece) 19.7" (500 mm) 2 136-0351

314C, 313C/B, 312D/C/B, 311D/C/B, 312, 311 SPROCKETS


Sprocket Rim (21 Teeth) 1 1 4I-7472

Bolt 15 8T-7338

1 Use with 176-4870 link assembly.

312D/C/B SPROCKETS2KW223-UP, 6SW457-UP, 9FS682-UP, 9NW210-UP, CBT, BNN, HJX


Sprocket Rim (21 Teeth) 1 1 180-2677

Bolt 15 8T-7338

1 Use with 184-5859 or 180-2689 link assembly

621


314C, 313C/B, 312D/C/B, 311D/C/B, 312, 311 IDLERS


Idler Group 2 4I-7337

Components of Group

Idler Assembly 1 6I-6590

Bearing 1 2 099-0157

Shaft 1 6I-6477

Bearing Block 2 4I-7488

Pin 2 099-0163


Toric Ring 1 2 099-0160


Plug 1 7H-3171

1 Component of preceding assembly or group; quantity shown is quantity per assembly or group

314C, 313C/B, 312D/C/B, 311D/C/B, 312, 311 CARRIER ROLLERS


Group 2 4I-7345

Components of Group

Roller Shell Assembly 1 7Y-2155

Bearing 1 2 099-0185

Shaft 1 7Y-2159

Retainer 1 7Y-2162

Cover 1 7Y-2158

Bolt 5 8T-1159


Toric Ring 1 2 099-4739

Seal -- Shaft O-Ring 1 6V-7658

Plug 1 7H-3171

Mounting Hardware 2

Bolt 1 8T-5878

1 Component of preceding assembly or group2 Not included in roller group; quantity shown is required to mount each roller.

622


312D, 311D TRACK ROLLERS


Single Flange (SF) -- 1 248-7259

Components of Group


Bearing 2 2 099-0195

Shaft 1 248-7262


End Collar (With oil fill hole) 1 248-7261

Dowel 2 6I-6549

Pin 1 6I-6549


Toric Ring 2 2 099-0194


Plug 1 3D-4603

Mounting Hardware 3

Bolt 4 7X-2555

Washer 4 8T-4122

1 311D, 311DL, 312D require 12 rollers. 312DL require 14 rollers.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 These components are not included in the roller group; quantities shown are required to mount each roller.

314C, 313C/B, 312C/B, 311C/B, 312, 311 TRACK ROLLERS



Components of Group


Bearing 1 2 099-0195

Shaft 1 151-9748

End Collar 2 4I-7489

Retaining Ring 1 6I-6454

Pin 1 6I-6549


Toric Ring 1 2 099-0194


Plug 1 7H-3171

Mounting Hardware 2

Bolt 4 7X-2555

Washer 4 8T-4122


623


314C, 313C, 312D/C/B, 311D CENTER GUIDING GUARDS



Bolt 8 8T-4779

Washer 8 9X-8257

624

Excavators/Front Shovels315D, 315C, 315B, 315

315C/B, 315 TRACKCFL, CFB, 1SW, 4YM, 6XM

7.50" (190.5 mm) PITCH -- 20 mm BOLT

QUANTITYSEALED

PART NUMBERGREASED

PART NUMBER

Link Assembly -- 41 Section 2 -- 1 194-1133 2


Track Links

RH Master 1 8E-8585 8E-8585

LH Master 1 8E-8586 8E-8586

RH Regular 40 9W-3137 9W-3137

LH Regular 40 9W-3138 9W-3138

Other Components

Pin 40 6Y-8186 6Y-8186

Master Pin 1 188-3064 188-3064

Bushing 40 117-1371 190-3523

Master Bushing 1 117-1372 190-3524

Seal (Poly - W) 80 -- 158-4380


Seal (Spring Washer) 164 5S-0709 --

Spacer 2 5S-0754 --

Cotter Pin 1 095-0863 095-0863

Track Hardware 3

Bolt 164 9W-3619 9W-3619

Nut 164 9W-3361 9W-3361

Special Group

Pin and Bushing Group (51 Sections) 1 -- 246-1906

1 Upgrade to 194-11332 Stepped Bushing Design.3 Not part of link assembly; required to assemble track group.

625


315DL, 315D, 315CL, 315BL, 315L TRACKCJN, NCM, BYK, KBD, CFT, CJC, ANF, 3AW, 6YM

7.50" (190.5 mm) PITCH -- 20 mm BOLT

QUANTITYSEALED

PART NUMBERGREASED

PART NUMBER



Track Links

RH Master 1 8E-8585 8E-8585

LH Master 1 8E-8586 8E-8586

RH Regular 43 9W-3137 9W-3137

LH Regular 43 9W-3138 9W-3138

Other Components

Pin 43 6Y-8186 6Y-8186

Master Pin 1 188-3064 188-3064

Bushing 43 117-1371 190-3523

Master Bushing 1 117-1372 190-3524

Seal - (Poly - W) 86 -- 158-4380



Spacer 2 5S-0754 --

Cotter Pin 1 095-0863 095-0863

Track Hardware 3

Bolt 176 9W-3619 9W-3619

Nut 176 9W-3361 9W-3361

Special Group


1 Upgrade to 194-1134.2 Stepped Bushing Design.3 Not part of link assembly; required to assemble track group.

315D/C/B, 315 TRACK SHOES7.50" (190.5 mm) PITCH -- 20 mm BOLT


Triple Grouser (Center Punched Slots) 19.7" (500 mm) 126-5061

Triple Grouser (Center Punched Slots) 1 23.6" (600 mm) 126-5062


Triple Grouser (Center Punched Slots) 2 31.5" (800 mm) 9W-9351

Self-Cleaning Shoe 2 31.5" (800 mm) 8E-8835

1 Rubber pad option 130-45342 Typically used on long configurations "L" only.

626


315D/C SPROCKETS


Sprocket Rim (21 Teeth) 1 8E-9805

Bolt 16 7X-2562

315B, 315 SPROCKETS


Sprocket Rim (21 Teeth) 1 102-8134

Bolt 22 8T-4193

315D IDLERS



Components of Group


Bearing 1 2 8E-4359

Shaft 1 246-5425


Pin 2 9W-9455




Plug 1 7H-3171


627


315C/B, 315 IDLERS


PART NUMBERPART

NUMBER

Idler Group 2 -- 1 -- 1

Components of Group

Idler Assembly 1 115-4926 115-4926

Bearing 2 2 8E-4359 8E-4359

Shaft 1 246-5425 246-5425

Bearing Block 2 239-4362 239-4362

Pin 2 9W-9455 9W-9455


Toric Ring 2 2 6H-1309 6H-1309

Seal -- Shaft O-Ring 2 6V-7658 6V-7658

Plug 1 7H-3171 7H-3171

1 Service Replaced by 248-7143 Idler Group.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group

315D/C/B, 315 CARRIER ROLLERS


Group 4 8E-5600

Components of Group

Roller Shell Assembly 1 8E-5602

Bearing 1 1 8E-6792

Bearing 1 8E-6793

Shaft 1 8E-5601

Retainer 1 8E-5606

Cover 1 8E-5605

Bolt 5 8T-1159

Seal -- Duo-Cone Group 2 8E-5608

Toric Ring 1 2 096-4279


Plug 1 7H-3171

Mounting Hardware 2

Bolt 1 8T-5878

1 Component of preceding assembly or group2 Not included in roller group; quantity shown is required to mount each roller.

628


315D/C/B, 315 TRACK ROLLERS




Components of Group

Roller Shell (SF) 1 8E-5032

Roller Shell (DF) 1 5Q-3215

Bearing 3 2 8E-5599

Shaft 1 8E-5035

End Collar 2 8E-5037

Retaining Ring 2 8E-5031

Pin 1 3E-3217




Stopper 1 5G-2247

Plug 1 6Y-0473

Mounting Hardware 4

Bolt 4 7X-2565

Washer 4 8T-4123

1 14 rollers required for 315L, 315BL, 315CL, 315DL, 315D machines.2 Used as required.3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.4 These components are not included in the roller group; quantities shown are required to mount each roller.

629


315D/C/B, 315 TRACK ROLLERS HEAVY DUTY


PART NUMBERPART

NUMBER

Single Flange (SF) (Heavy Duty) - 1 -- 2 206-1265

Components of Group

Roller Shell (SF) (Heavy Duty) 1 -- 3 209-3313

Bearing 4 2 8E-5599 8E-5599

Shaft 1 8E-5035 209-3312

End Collar 2 8E-5037 8E-5037

Pin 2 3E-3217 3E-3217

Seal -- Duo-Cone Group 2 9W-2142 206-9211

Toric Ring 4 2 8H-2265 162-2168


Plug 1 6Y-0473 9W-2146

Mounting Hardware 5

Bolt 4 7X-2565 7X-2565

Washer 4 8T-4123 8T-4123

1 Use as required.2 Upgrade to 206-1265 Roller Group3 Order 1--Roller Shell--209-3313 and 1-Plug 9W-21484 Component of preceding assembly or group; quantity shown is quantity per assembly or group.5 These components are not included in the roller group; quantities shown are required to mount each roller.

315D, 315C, 315B, 315 CENTER GUIDING GUARDSUSE WITH 6 AND 7 ROLLER, TRACK ROLLER FRAMES



Bolt 8 8T-5460

Washer 8 8T-4123

315D, 315C, 315B, 315 TRACK GUIDING GUARDS (FRONT OR REAR)USE WITH 7 ROLLER TRACK ROLLER FRAMES



Bolt (20 mm) 12 8T-5460

Washer 12 8T-4123

630


315C, 315B, 315 TRACK GUIDING GUARDS (FRONT)USE WITH 6 ROLLER TRACK ROLLER FRAMES



Bolt (20 mm) 8 8T-5460

Washer 8 8T-4123

315C, 315B, 315 TRACK GUIDING GUARDS (REAR)USE WITH 6 ROLLER TRACK ROLLER FRAMES



Bolt (20 mm) 8 8T-5460

Washer 8 8T-4123

631

Excavators/Front Shovels317BL, 317

317, 317N TRACK4MM, 9SR

7.50" (190.5 mm) PITCH -- 20 mm BOLT

QUANTITYSEALED

PART NUMBERGREASED

PART NUMBER



Track Links

RH Master 1 8E-8585 8E-8585

LH Master 1 8E-8586 8E-8586

RH Regular 43 9W-3137 9W-3137

LH Regular 43 9W-3138 9W-3138

Other Components

Pin 43 6Y-8186 6Y-8186

Master Pin 1 188-3064 188-3064

Bushing 43 117-1371 190-3523

Master Bushing 1 117-1372 190-3524

Seal (Poly - W) 86 -- 158-4380



Spacer 2 5S-0754 --

Cotter Pin 1 095-0863 095-0863

Track Hardware 3

Bolt 176 9W-3619 9W-3619

Bolt 4 176 6Y-0846 6Y-0846

Nut 176 9W-3361 9W-3361

Special Group


1 Upgrade to 194-1134.2 Stepped bushing design.3 Not part of link assembly; required to assemble track group.4 For use with Extreme Service and Double Grouser Track Shoes.

632


317BL, 317BLN TRACKGREASE LUBRICATED

6DZ, 9WW7.50" (190.5 mm) PITCH -- 20 mm BOLT

QUANTITYFORMER

PART NUMBERPART

NUMBER



Track Links

RH Master 1 8E-8585 8E-8585

LH Master 1 8E-8586 8E-8586

RH Regular 44 9W-3137 9W-3137

LH Regular 44 9W-3138 9W-3137

Other Components

Pin 44 6Y-8186 6Y-8186

Master Pin 1 188-3064 188-3064

Bushing 44 159-0950 190-3523

Master Bushing 1 117-1372 190-3524

Seal - (Poly-W) 88 158-4380 158-4380

Seal - Master (Poly-W) 2 158-4381 158-4381

Cotter Pin 1 095-0863 095-0863

Track Hardware 3

Bolt 180 9W-3619 9W-3619

Bolt 4 180 6Y-0846 6Y-0846

Nut 180 9W-3361 9W-3361

Special Group


1 Upgrade to 194-1609.2 Stepped Bushing Design.3 Not part of link assembly; required to assemble track group.4 For use with Extreme Service and Double Grouser Track Shoes.

317BL, 317BLN, 317, 317N TRACK SHOES7.50" (190.5 mm) PITCH -- 20 mm BOLT





1 Rubber pad option 130-4534

633


317BL, 317BLN, 317, 317N SPROCKETS



Bolt 22 8T-4193

317BL, 317BLN, 317, 317N IDLERS


PART NUMBERPART

NUMBER

Idler Group 2 113-2907 248-7143

Components of Group

Idler Assembly 1 115-4926 115-4926

Bearing 1 2 8E-4359 8E-4359

Shaft 1 9W-9451 246-5425

Bearing Block 2 115-3701 239-4362

Pin 2 9W-9455 9W-9455


Toric Ring 1 2 6H-1309 6H-1309


Plug 1 7H-3171 7H-3171


317BL, 317BLN, 317, 317N CARRIER ROLLERS


Group 4 8E-5600

Components of Group


Bearing 1 1 8E-6792

Bearing 1 8E-6793

Shaft 1 8E-5601

Retainer 1 8E-5606

Cover 1 8E-5605

Bolt 5 8T-1159


Toric Ring 1 2 096-4279

Shaft O-Ring 1 6V-7661

Plug 1 7H-3171

Mounting Hardware 2

Bolt 1 8T-5878


634


317BL, 317BLN, 317, 317N TRACK ROLLERS




Components of Group



Bearing 2 2 8E-5599

Shaft 1 8E-5035



Pin 1 3E-3217


Toric Ring 2 2 162-2168


Stopper 1 5G-2247

Plug 1 6Y-0473

Mounting Hardware 3

Bolt 4 7X-2565

Washer 4 8T-4123

1 Use as required.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 These components are not included in the roller group; quantities shown are required to mount each roller.

317BL, 317BLN, 317, 317N TRACK ROLLERS HEAVY DUTY


PART NUMBERPART

NUMBER


Components of Group


Bearing 4 2 8E-5599 8E-5599

Shaft 1 8E-5035 209-3312

End Collar 2 8E-5037 8E-5037

Pin 2 3E-3217 3E-3217


Toric Ring 4 2 8H-2265 162-2168


Plug 1 6Y-0473 9W-2146

Mounting Hardware 5

Bolt 4 7X-2565 7X-2565

Washer 4 8T-4123 8T-4123


635


317BL, 317BLN CENTER GUIDING GUARDS



Bolt 8 8T-5460

Washer 8 8T-4123

317, 317N CENTER GUIDING GUARDS



Bolt 24 8T-5460

Washer 24 8T-4123

636

Excavators/Front Shovels318C, 318B

318CL, 318CLN TRACKGREASED LUBRICATED

CWP, GPA, MDY7.50" (190.5 mm) PITCH - 20 mm BOLT




Track Links

RH Master 1 8E-8585

LH Master 1 8E-8586



Other Components

Pin 46 6Y-8186


Bushing 46 190-3523


Seal (Poly - W) 92 158-4380



Track Hardware 1

Bolt 188 9W-3619

Bolt 2 188 6Y-0846

Nut 188 9W-3361

Special Group

Pin and Bushing Group (51 Sections) 1 246-1906

1 Not part of link assembly; required to assemble track group.2 For use with Extreme Service and Double Grouser Track Shoes.

637


318CL TRACKGREASED LUBRICATED

DAH7.50" (190.5 mm)PITCH - 20 mm BOLT




Track Links

RH Master 1 8E-8585

LH Master 1 8E-8586



Other Components

Pin 48 6Y-8186


Bushing 48 190-3523


Seal (Poly - W) 96 158-4380



Track Hardware 1

Bolt 196 9W-3619

Bolt 2 196 6Y-0846

Nut 196 9W-3361

Special Group


1 Not part of link assembly; required to assemble track group.2 For use with Extreme Service and Double Grouser Track Shoes.

638


318C, 318BL, 318BN TRACKGREASE LUBRICATEDADC, AEJ, BTG, FAA

7.50" (190.5 mm) PITCH -- 20 mm BOLT


NUMBER PART NUMBER



Track Links

RH Master 1 8E-8585 8E-8585

LH Master 1 8E-8586 8E-8586

RH Regular 44 9W-3137 9W-3137

LH Regular 44 9W-3138 9W-3138

Other Components

Pin 44 6Y-8186 6Y-8186

Master Pin 1 188-3064 188-3064

Bushing 44 159-0950 190-3523

Master Bushing 1 117-1372 190-3524

Seal (Poly - W) 88 158-4380 158-4380

Seal - Master (Poly - W) 2 158-4381 158-4381

Cotter Pin 1 095-0863 095-0863

Track Hardware 3

Bolt 180 9W-3619 9W-3619

Bolt 4 180 6Y-0846 6Y-0846

Nut 180 9W-3361 9W-3361

Special Group



639


318B, 318BL, 318BN TRACKSEALED

3LR, 5BJ, 7KZ7.50" (190.5 mm) PITCH -- 20 mm BOLT




Track Links

RH Master 1 8E-8585

LH Master 1 8E-8586



Other Components

Pin 44 6Y-8186


Bushing 44 117-1371



Spacer 2 5S-0754


Track Hardware 2

Bolt 180 9W-3619

Bolt 3 180 6Y-0846

Nut 180 9W-3361

Special Group


1 Upgrade to 194-1609.2 Not part of link assembly; required to assemble track group.3 For use with Extreme Service and Double Grouser Track Shoes.

318C/B, 318BL, 318BN TRACK SHOES7.50" (190.5 mm) PITCH -- 20 mm BOLT




Triple Grouser (Center Punched Slots) 27.6" (700 mm) 6I-9454

Triple Grouser (Center Punched Slots) 31.5" (800 mm) 9W-9351

Triple Grouser (Heavy Duty, Center Punched Slots) 19.7" (500 mm) 121-0133


640


318BL, 318BN SPROCKETSGREASE LUBRICATED

ADC, AEJ



Bolt 22 8T-4183

318C/B, 318BL, 318BN SPROCKETSGREASED CWP, GPA, MDY

SEALED 3LR, 5BJ, 7KZ



Bolt 16 7X-2562

318C/B, 318BL, 318BN IDLERS


PART NUMBERPART

NUMBER

Idler Group 2 113-2907 248-7143

Components of Group

Idler Assembly 1 115-4926 115-4926

Bearing 1 2 8E-4359 8E-4359

Shaft 1 9W-9451 246-5425

Bearing Block 2 115-3701 239-4362

Pin 2 9W-9455 9W-9455


Toric Ring 1 2 6H-1309 6H-1309


Plug 1 7H-3171 7H-3171


641


318C/B, 318BL, 318BN CARRIER ROLLERS


Group 4 8E-5600

Components of Group


Bearing 1 1 8E-6792

Bearing 1 8E-6793

Shaft 1 8E-5601

Retainer 1 8E-5606

Cover 1 8E-5605

Bolt 5 8T-1159


Toric Ring 1 2 096-4279


Plug 1 7H-3171

Mounting Hardware 2

Bolt 1 8T-5878


318C/B, 318BL, 318BN TRACK ROLLERS




Components of Group



Bearing 2 2 8E-5599

Shaft 1 8E-5035



Pin 1 3E-3217


Toric Ring 2 2 162-2168


Stopper 1 5G-2247

Plug 1 6Y-0473

Mounting Hardware 3

Bolt 4 7X-2565

Washer 4 8T-4123


642


318C/B, 318BL, 318BN TRACK ROLLERS HEAVY DUTY


PART NUMBERPART

NUMBER


Components of Group


Bearing 4 2 8E-5599 8E-5599

Shaft 1 8E-5035 209-3312

End Collar 2 8E-5037 8E-5037

Pin 2 3E-3217 3E-3217


Toric Ring 4 2 8H-2265 162-2168


Plug 1 6Y-0473 9W-2146

Mounting Hardware 5

Bolt 4 7X-2565 7X-2565

Washer 4 8T-4123 8T-4123


318C CENTER GUIDING GUARDS



Bolt 8 8T-5460

Washer 8 8T-4123

318B, 318BL, 318BN CENTER GUIDING GUARDS



Bolt 8 8T-5460

Washer 8 8T-4123

643

Excavators/Front Shovels323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320

321D, 321C, 320D, 320C TRACKGREASE LUBRICATED

AKH, AMC, APA, BCB, BDC, BEF, CLM, BPR, BCN, GLA, CCD, FBA, FBB, MAA, DAX, JCX, AZR, DWZ, FAL,AGF, MCH, EBT, WFD, CXY, DFT, RBL, KGL, SNS, AMR, YDS, GNG, MAB, RAW, JGZ

7.50" (190.5 mm) PITCH -- 20 mm BOLT

QUANTITYFORMER

PART NUMBERPART

NUMBER



Track Links

RH Master 1 8E-8585 8E-8585

LH Master 1 8E-8586 8E-8586

RH Regular 44 9W-3137 9W-3137

LH Regular 44 9W-3138 9W-3138

Other Components

Pin 44 6Y-8186 6Y-8186

Master Pin 1 188-3064 188-3064

Bushing 44 159-0950 190-3523

Master Bushing 1 117-1372 190-3524

Seal (Poly - W) 88 158-4380 158-4380

Seal - Master (Poly -W ) 2 158-4381 158-4381

Cotter Pin 1 095-0863 095-0863

Track Hardware 3

Bolt 180 9W-3619 9W-3619

Bolt 4 180 6Y-0846 6Y-0846

Nut 180 9W-3361 9W-3361

Special Group


1 Upgrade to 194-1609.2 Stepped Bushing Design.3 Not part of link assembly; required to assemble track group.4 For use with Extreme Service and Double Grouser Track Shoes.

644


323DL, 321DL, 321CL, 320DL, 320CL, 319D, 319C, TRACKGREASE LUBRICATED

ALF, ALX, ANB, BDB, JPL, PAA, PAB, GAA, GAB, HBC, BDE, BEA, BER, BKK, CLZ, BRX, KBB, MCF, KGL, BGB,BZH, DAY, EAW, FMH, KBH, MDT, NAS, PBD, BYM, JLG, CYD, RAC, PBM, SDC, NDE, BWP, CWN, ZGB, DHK,

WJN, TAE, KAF, BZF, SCW, PHX, A9F, EBY, KGF, A8F, FXF, XCF, FNA, DFB, EAG, HKT, MDE7.50" (190.5 mm) PITCH -- 20 mm BOLT

QUANTITYFORMER

PART NUMBERPART

NUMBER



Track Links

RH Master 1 8E-8585 8E-8585

LH Master 1 8E-8586 8E-8586

RH Regular 48 9W-3137 9W-3137

LH Regular 48 9W-3138 9W-3138

Other Components

Pin 48 6Y-8186 6Y-8186

Master Pin 1 188-3064 188-3064

Bushing 48 159-0950 190-3523

Master Bushing 1 117-1372 190-3524

Seal (Poly - W) 96 158-4380 158-4380

Seal - Master (Poly - W) 2 158-4381 158-4381

Cotter Pin 1 095-0863 095-0863

Track Hardware 3

Bolt 196 9W-3619 9W-3619

Bolt 4 196 6Y-0846 6Y-0846

Nut 196 9W-3361 9W-3361

Special Group



645


320DL, 320CL FORESTRY MACHINE TRACKSAH, GKS, BWW, SRT, EAX

7.50" (190.5 mm) PITCH - 3/4" BOLT

QUANTITYGREASED

PART NUMBER

Link Assembly -- (50 Sections) 2 206-1469


Track Links







Other Components

Pin 50 206-1470

Bushing 50 106-1618



Track Hardware 1

Bolt 196 6V-1792

Nut 196 1S-1860




646


320B, 320BL, 320BN, 320, 320N, 320L TRACK45 SECTION: 1XM, 2DL, 3MR, 3RK, 3XM, 4FS, 4ZJ, 5BR, 7GJ, 7WK, 8LK, 9WG, 8ES, 1CS, 1XS, 2AS, 2BN, 4RN,

4XW, 8GZ, 9KR49 SECTION: 1KL, 1TL, 3XK, 4BK, 4JM, 4MR, 5CS, 6CR, 8HJ, 9KK, 9CS, 2WZ, 3YZ, 5GW, 6LS, 6LW, 7JR, 7ZZ,

9JS, 9WS, BBG7.50" (190.5 mm) PITCH -- 20 mm BOLT

SEALEDPART NUMBER

45SECTION

49SECTION

Link Assembly (Quantity 2) -- 1 -- 2


Track Links

RH Master 8E-8585 1 1

LH Master 8E-8586 1 1

RH Regular 9W-3137 44 48

LH Regular 9W-3138 44 48

Other Components

Pin 6Y-8186 44 48

Master Pin 188-3064 1 1

Bushing 117-1371 44 48


Seal (Spring Washer) 5S-0709 180 196

Spacer 5S-0754 2 2

Cotter Pin 095-0863 1 1

Track Hardware 3

Bolt 9W-3619 180 196

Bolt 4 6Y-0846 180 196

Nut 9W-3361 180 196

Special Group

Pin and Bushing Group (50 Sections) 137-4123 1 1

1 Upgrade to 194-1609.2 Upgrade to 194-1608.3 Not part of link assembly; required to assemble track group.4 For use with Extreme Service and Double Grouser Track Shoes.

647


323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 TRACK SHOES7.50" (190.5 mm) PITCH -- 20 mm BOLT


Single Grouser (Trapezoidal Opening, Clipped Grouser) 23.6" (600 mm) 106-0614










Triple Grouser (Heavy Duty, Center Punched Slots) 25.6" (650 mm) 1Q-4772



Self-Cleaning 31.5" (800 mm) 8E-8835


320D, 320C FORESTRY MACHINE TRACK SHOES7.50" (190.5 mm) PITCH - 3/4" BOLT


MASTER SHOEPART NUMBER

Single Grouser (Trapezoidal Opening) (Clipped Grouser) 24" (610 mm) 207-4873 207-4874




323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 SPROCKETS



Bolt 16 7X-2562 1

1 Use 8T-5460 bolts on 319C machines.

320C, 320B, 320, SPROCKETUSE WITH FORESTRY MACHINE LINK ASSEMBLY



Bolt 16 7X-2562

648


320C SPROCKETSBGB


Sprocket Rim (21 Teeth) (Use with 325 final drive) 1 187-6540

Bolt 18 7X-2562

320D, 320C SPROCKETSUSE WITH FORESTRY MACHINE LINK ASSEMBLY

SAH, GKS, BWW, SRT, EAX


Sprocket Rim (21 Teeth) (Use with 325 final drive) 1 221-0010

Bolt 18 7X-2562

323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 IDLERS


PART NUMBERPART

NUMBER

Idler Group 2 113-2907 248-7143

Components of Group

Idler Assembly 1 262-4781 262-4781

Bearing 1 2 8E-4359 8E-4359

Shaft 1 9W-9451 246-5425

Bearing Block 2 115-3701 239-4362

Pin 2 9W-9455 9W-9455


Toric Ring 1 2 6H-1309 6H-1309


Plug 1 7H-3171 7H-3171


649


323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 CARRIER ROLLERS


Group 4 8E-5600

Components of Group


Bearing 1 1 8E-6792

Bearing 1 1 8E-6793

Shaft 1 8E-5601

Retainer 1 8E-5606

Cover 1 8E-5605

Bolt 5 8T-1159


Toric Ring 1 2 096-4279


Plug 1 7H-3171

Mounting Hardware 2

Bolt 1 8T-5878


650


323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 TRACK ROLLERS




Components of Group



Bearing 3 2 8E-5599

Shaft 1 8E-5035



Pin 1 3E-3217




Stopper 1 5G-2247

Plug 1 6Y-0473

Mounting Hardware 4

Bolt 4 7X-2565

Washer 4 8T-4123

1 14 Single flange roller groups used on the following machines: BCN, CCD, FBA, FBB, AKH, AMC, APA, BDC, CLM, BPR, DAX, JCX, MCH,WFD, RBL, YDS, DWZ, AMR, AZR, CXY, DFT, GKL, FAL, AGF. 16 Single flange roller groups used on the following machines: GLA, GAA, GAB,HBC, PAB, BDE, BEA, ALF, ALX, ANB, BER, BRX, CLZ, KBB, MCF, KGL, BZH, DAY, EAW, FMH, KBH, MDT, NAS, PBD, BYM, JLG, CYD, RAC,PBM, SDC, NDE, SRT, ZGB, TAE, SCW, EBY, KGF, FXF, DFB, KAF, BWP, CWN, DHK, FXK, PHX, XCK, A9F, A8F.2 Use as required.3 Component of preceding assembly or group; quantity shown is quantity per assemly or group.4 These components are not included in the roller group; quantities shown are required to mount each roller.

651


320D, 320C TRACK ROLLERSBCB, MAA, BEF, EBT, SNS




Components of Group



Shaft 1 8E-5035



Pin 1 3E-3217




Stopper 1 5G-2247

Plug 1 6Y-0473

Mounting Hardware 2

Bolt 4 7X-2565

Washer 4 8T-4123

1 Component of preceding assembly or group; quantity shown is quantity per assemly or group.2 These components are not included in the roller group; quantities shown are required to mount each roller.

652


320DL, 320CL TRACK ROLLERSBDB, PAA, BBC, WJN, FNA




Components of Group



Shaft 1 8E-5035



Pin 1 3E-3217




Stopper 1 5G-2247

Plug 1 6Y-0473

Mounting Hardware 2

Bolt 4 7X-2565

Washer 4 8T-4123

1 Component of preceding assembly or group; quantity shown is quantity per assemly or group.2 These components are not included in the roller group; quantities shown are required to mount each roller.

653


323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 TRACK ROLLERS HEAVY DUTYStandard on these serial number machines: SAH, BGB, BKK, JPL, GKS, BWW, BZF, EAX (16 required)

Optional use for all other 319, 320, 321, 323 machines


PART NUMBERPART

NUMBER


Components of Group


Bearing 4 2 8E-5599 8E-5599

Shaft 1 8E-5035 209-3312

End Collar 2 8E-5037 8E-5037

Pin 2 3E-3217 3E-3217


Toric Ring 4 2 8H-2265 162-2168


Plug 1 6Y-0473 9W-2146

Mounting Hardware 5

Bolt 4 7X-2565 7X-2565

Washer 4 8T-4123 8T-4123


323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 CENTER GUIDING GUARDS



Bolt 8 8T-5460

Washer 8 8T-4123

320C CENTER GUIDING GUARDSJPL



Bolt 8 8T-5460

Washer 8 8T-4123

654


321D, 320D, 320C TRACK ROLLER GUARD (FULL LENGTH)Use with 45 section link assembly



Bolt (M 20) 24 8T-5460

Washer 24 8T-4123

323DL, 321DL, 319DL, 320DL, 320CL TRACK ROLLER GUARDS (FULL LENGTH)Use with 49 section link assembly



Bolt (M 20) 32 8T-5460

Washer 32 8T-4123

320DL, 320CL TRACK ROLLER GUARDS (FULL LENGTH)Use with Forestry Machine Track

SAH, EAX



Bolt 32 8T-5460

Washer 32 8T-4123

321D, 320D, 320C SPROCKET REAR GUARDSUse with 45 section link assembly



Bolt (M 20) 12 8T-5460

Washer 12 8T-4123

323DL, 321DL, 319DL, 320DL, 320CL SPROCKET REAR GUARDSUse with 49 section link assembly



Bolt (M 20) 16 8T-5460

Washer 16 8T-4123

655


320DL, 320CL SHOE SUPPORT GUARDSBGB, BZF




Bolt (M 20) 32 8T-5460

Bolt (M 20) 32 8T-6430

Washer 64 8T-4123

Bar 16 5Q-3369

320DL FORESTRY MACHINE TRACK SHOE SUPPORT GUARDSGKS, EAX




Bolt (M 20) Guard Assembly to Frame 32 8T-6430

Washer 32 8T-4123

Bar 16 5Q-3369

Bolt (M 20) 32 8T-5460

Washer 32 8T-4123

656

Excavators/Front Shovels323DS, 320CS, 320BS, 320S

323DS, 320CS, 320BS TRACKSLIP FIT MASTER LINKS

5MS, BBL, SED, DKW8.00" (203.2 mm) PITCH -20 mm BOLT

QUANTITYSEALED

PART NUMBERGREASED

PART NUMBER



Track Links

RH Master 1 115-1853 115-1853

LH Master 1 115-1854 115-1854

RH Regular 44 6Y-1607 6Y-1607

LH Regular 44 6Y-1608 6Y-1608

Other Components

Pin 44 6Y-0851 6Y-0851

Master Pin (Slip Fit) 1 188-3065 188-3065

Bushing 44 179-0695 321-1462

Master Bushing 1 179-0693 201-0826

Seal (Ploy W) 88 -- 179-3425

Seal - Master (Poly W) 2 -- 179-3427

Seal (Spring Washer) 180 6Y-0852 --

Spacer 2 6Y-0847 --

Cotter 1 095-7944 095-7944

Track Hardware 2

Bolt 180 306-2148 306-2148

Nut 180 9W-3361 9W-3361

Special Group

Pin and Bushing Group (48 Sections) (Contains Press Fit Master Pin) 1 137-4124 246-1907

1 Upgrade to 201-9116 link assembly.2 Not part of link assembly; required to assemble track group.

657


320S TRACKPRESS FIT MASTER LINKS

6KM8.00" (203.2 mm) PITCH -- 20 mm BOLT


PART NUMBERGREASED

PART NUMBER



Track Links

RH Regular 45 6Y-1607 6Y-1607

LH Regular 45 6Y-1608 6Y-1608

Other Components

Pin 44 6Y-0851 6Y-0851

Master Pin (Press Fit) 1 6Y-0850 6Y-0850

Bushing 44 179-0695 321-1462

Master Bushing 1 179-0693 201-0826

Seal (Ploy W) 88 -- 179-3425

Seal - Master (Poly W) 2 -- 179-3427


Spacer 2 6Y-0847 --

Track Hardware 2

Bolt 180 306-2148 306-2148

Nut 180 9W-3361 9W-3361

Special Group 2

Pin and Bushing Group (48 Sections) 1 137-4124 246-1907

1 Upgrade to 213-1933 link assembly.2 Not part of link assembly; required to assemble track group.

323DS, 320CS, 320BS, 320S TRACK SHOES8.00" (203.2 mm) PITCH -- 20 mm BOLT


Triple Grouser (Offset RH) 21.7" (550 mm) 126-5304

Triple Grouser (Offset LH) 21.7" (550 mm) 126-5305

323DS, 320CS, 320BS, 320S SPROCKETS


Sprocket Rim (21 Teeth) 1 6Y-4898

Bolt 18 8T-6430

Washer 18 8T-3282

658


323DS, 320CS, 320BS IDLERS5MS, BBL, SED



Components of Group


Bearing 1 2 6Y-2272

Shaft 1 112-9951


Pin 2 6Y-2266




Plug 1 7H-3171


320S IDLERS6KM



Components of Group


Bearing 1 2 6Y-2272

Shaft 1 112-9951


Pin 2 6Y-2266




Plug 1 7H-3171


659


323DS, 320CS, 320BS, 320S CARRIER ROLLERS


Group 4 6Y-5323 1

Components of Group


Bearing 2 1 6Y-9855

Bearing 1 6Y-9856

Shaft 1 6Y-9858

Retainer 1 6Y-8075


Cover 1 6Y-8077

Bolt 5 8T-1159




Plug 1 7H-3171

Mounting Hardware 3

Bolt 1 8T-5878

1 Service replaced by: 300-4545.2 Component of preceding assembly or group.3 Not included in roller group; quantity shown is required to mount each roller.

320CS, 320BS, 320S TRACK ROLLERS


NUMBER PART NUMBER

Single Flange (SF) 14 -- 1 247-0565

Components of Group

Roller Shell (SF) 1 6Y-1056 6Y-1056

Bearing 2 2 6Y-1782 6Y-1782

Shaft 1 6Y-1053 247-0564

End Collar 2 6Y-1054 158-8086

Retaining Ring 1 6Y-6201 158-8096

Pin 1 9W-2204 159-9526


Toric Ring 2 2 6H-1309 6H-1309


Stopper 1 5G-2247 5G-2247

Plug 1 6Y-0473 6Y-0473

Mounting Hardware 3

Bolt 4 7X-2565 7X-2565

Washer 4 8T-4123 8T-4123

1 Upgrade to 247-0565 Roller GP.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 These components are not included in the roller group; quantities shown are required to mount each roller.

660


323DS TRACK ROLLERS HEAVY DUTY



Components of Group


Bearing 1 2 6Y-1782

Shaft 1 206-9260


Pin 2 159-9526


Toric Ring 1 2 171-5713


Plug 1 9W-2146

Mounting Hardware 2

Bolt 4 7X-2565

Washer 4 8T-4123


323DS, 320CS, 320BS, 320S CENTER GUIDING GUARDS



Bolt 8 7X-2563

Washer 8 8T-4123

Spacer 8 8V-1715

323DS TRACK ROLLER GUARDS (FULL LENGTH)




Bolt (M20) (Guard Assemblies to Frame) 24 8T-5460

Washer 24 8T-5439

Pipe 12 117-5612

Bolt (M 20) 12 7X-2440

Washer 24 8T-5439

Support Assembly 12 186-5564

661


323DS SPROCKET REAR GUARDS




Bolt (M20) (Guard Assemblies to Frame) 12 8T-5460

Washer 12 8T-5439

Pipe 6 117-5612

Bolt (M 20) 6 7X-2440

Washer 12 8T-5439


662


324D, 322C/B, 322, 322N TRACKADX, BFN, BLP, BNY, 3NR, 7WL, 8MR, CJX, AWN, ECH

7.50" (190.5 mm) PITCH -- 20 mm BOLT

QUANTITYSEALED

PART NUMBERGREASED

PART NUMBER



Track Links

RH Master 1 8E-8585 8E-8585

LH Master 1 8E-8586 8E-8586

RH Regular 46 9W-3137 9W-3137

LH Regular 46 9W-3138 9W-3138

Other Components

Pin 46 6Y-8186 6Y-8186

Master Pin 1 188-3064 188-3064

Bushing 46 117-1371 190-3523

Master Bushing 1 117-1372 190-3524

Seal-(Poly-w) 92 -- 158-4380

Seal-Master(Poly-w) 2 -- 158-4381


Spacer 2 5S-0754 --

Cotter Pin 1 095-0863 095-0863

Track Hardware 3

Bolt 188 9W-3619 9W-3619

Bolt 4 188 6Y-0846 6Y-0846

Nut 188 9W-3361 9W-3361

Special Group

Pin and Bushing Group (50 Sections) 1 137-4123 --



663


324DL, 322CL, 322BL, 322BLN, 322L, 322LN TRACKBMX, BTE, BFX, BKM, BKJ, EMR, BFK, BPH, 1YS, 1ZS, 2ES, 4RM, 5CR, 8CL, 8NR, 9RL, BGR, M2H, DFP, SYM,

T2D, LAB, JJG, BYE, EJC, HEK7.50" (190.5 mm) PITCH -- 20 mm BOLT

QUANTITYSEALED

PART NUMBERGREASED

PART NUMBER



Track Links

RH Master 1 8E-8585 8E-8585

LH Master 1 8E-8586 8E-8586

RH Regular 50 9W-3137 9W-3137

LH Regular 50 9W-3138 9W-3138

Other Components

Pin 50 6Y-8186 6Y-8186

Master Pin 1 188-3064 188-3064

Bushing 50 117-1371 190-3523

Master Bushing 1 117-1372 190-3524

Seal (Poly - W) 100 -- 158-4380



Spacer 2 5S-0754 --

Cotter Pin 1 095-0863 095-0863

Track Hardware 3

Bolt 204 9W-3619 9W-3619

Bolt 4 204 6Y-0846 6Y-0846

Nut 204 9W-3361 9W-3361

Special Group 3

Pin and Bushing Group (50 Sections) 1 137-4123 --



664


324D FORESTRY MACHINE TRACKJLS, JKR

8.00" (203.2 mm) PITCH - 20 mm BOLT

QUANTITYGREASED

PART NUMBER



Track Links



Other Components

Pin 47 6Y-0851

Master Pin (Press Fit) 1 6Y-0850

Bushing 47 321-1462


Seal (Poly W) 94 179-3425


Track Hardware 1

Bolt 192 306-2148

Nut 192 9W-3361


665


324D LGP FORESTRY MACHINE TRACKJGK

8.00" (203.2 mm) PITCH - 3/4" BOLT

QUANTITYGREASED

PART NUMBER



Track Links





Other Components

Pin 52 198-1125


Bushing 52 8E-7222


Seal Assembly 104 207-0544

Seal Assembly - Master 2 269-7103


Thrust Ring - Master 2 269-4004

Track Hardware 1

Bolt 212 6V-1792

Nut 212 1S-1860


666


322CL FORESTRY MACHINE TRACKCAM, CBY, LAR, C3R,

8.00" (203.2 mm)PITCH - 20 mm BOLT

QUANTITYGREASED

PART NUMBER



Track Links





Other Components

Pin 47 6Y-0851

Master Pin (Slip Fit) 1 188-3065

Bushing 47 321-1462


Seal (Poly W) 94 179-3425


Cotter 1 095-7944

Track Hardware 1

Bolt 192 306-2148

Nut 192 9W-3361


324D, 322C/B, 322 TRACK SHOES7.50" (190.5 mm) PITCH -- 20 mm BOLT


Single Grouser (Trapezoidal Opening, Clipped Grouser) 23.6" (600 mm) 106-0614









Triple Grouser (Heavy Duty) 25.6" (650 mm) 1Q-4772




667


324D, 322C FORESTRY MACHINE TRACK SHOESCAM, CBY, LAR, C3R, JLS, JKR

8.00" (203.2 mm) PITCH - 20 mm BOLT





Double Grouser (Trapezoidal Opening) 27.5" (700 mm) 3Q-6993


324D FORESTRY MACHINE TRACK SHOESJGK

8.00" (203.2 mm) PITCH - 3/4" BOLT


Triple Grouser (Heavy Duty, Center Punched Slots) (Tri) (RH) 35.4" (900 mm) 300-6457

Triple Grouser (Heavy Duty, Center Punched Slots) (Tri) (LH) 35.4" (900 mm) 300-6458

324D, 322C/B, 322 SPROCKETS



Bolt 16 7X-2562

324D, 322C SPROCKETSCAM, CBY, LAR, C3R, JLS, JKR



Bolt 18 8T-6430

Washer 1 18 8T-3282

1 For 322C machines only.

324D, SPROCKET (JGK) USE WITH D6R LINKSUSE WITH FORESTRY MACHINE LINKS

JGK



Bolt 18 8T-6430

668


324D, 322C/B, 322 IDLERS



Components of Group


Bearing 1 2 6I-9587

Shaft 1 6I-9597


Pin 2 9W-9455




Plug 1 7H-3171


324D, 322C IDLERSCAM, CBY, LAR, C3R, JGK, JLS, JKR



Components of Group


Bearing 1 2 6Y-2272

Shaft 1 112-9951


Pin 2 6Y-2266




Plug 1 7H-3171


669


322C IDLERSBPH


Idler Group 2 194-1130 1

Components of Group


Bearing 2 2 6I-9587

Shaft 1 6I-9597


Pin 2 9W-9455




Plug 1 7H-3171

1 Not serviced2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

324D, 322C/B, 322 CARRIER ROLLERS


Group 4 8E-5600

Components of Group


Bearing 1 1 8E-6792

Bearing 1 8E-6793

Shaft 1 8E-5601

Retainer 1 8E-5606

Cover 1 8E-5605

Bolt 5 8T-1159


Toric Ring 1 2 096-4279


Plug 1 7H-3171

Mounting Hardware 2

Bolt 1 8T-5878


670


324D, 322C CARRIER ROLLERSCAM, CBY, LAR, C3R, JLS, JKR



Components of Group


Bearing 1 2 6Y-1782

Shaft 1 247-0564


Ring Retaining 2 158-8096

Pin 1 159-9526




Stopper 1 5G-2247

Plug 1 6Y-0473

Mounting Hardware 2

Bolt 4 7X-2565

Washer 4 8T-4123

1 Component of preceding assembly or group; quantity shown is quantity per assembly of group.2 Not included in roller group; quantity shown is required to mount each roller.

324D CARRIER ROLLERSJGK

PER MACHINE QUANTITY PART NUMBER

Single Flange (SF) (Heavy Duty) 6 206-1264

Components of Group

Roller Shell (SF) (Heavy Duty) 1 206-9257

Shaft 1 206-9260


Pin 2 159-9526


Toric Ring 1 2 171-5713


Plug 1 9W-2146

Mounting Hardware 2

Bolt 4 7X-2565

Washer 4 8T-4123


671


324D, 322C/B, 322 TRACK ROLLERS


NUMBER PART NUMBER

Single Flange (SF) -- 1 -- 2 163-4145

Double Flange (DF) - 3 -- 163-4146

Components of Group

Roller Shell (SF) 1 6I-9398 6I-9398

Roller Shell (DF) 1 -- 130-9285

Bearing 4 2 6I-9399 6I-9399

Shaft 1 6I-9397 163-7393

End Collar 2 6Y-1054 158-8086


Pin 1 9W-2204 159-9526


Toric Ring 4 2 6H-1309 6H-1309


Stopper 1 5G-2247 5G-2247

Plug 1 6Y-0473 6Y-0473

Mounting Hardware 5

Bolt 4 7X-2565 7X-2565

Washer 4 8T-4123 8T-4123

1 14 Single flange roller groups used on the following machines: ADX, BLP, BNY, HEK, CJX, AWN. 16 Single flange roller groups used onthe following machines: BMX, BTE, BKM, BKJ, EMR, BFK, BGR, DFP, SYM, T2D, LAB, JJG, BYE, EJC. 8 Single flange roller groups and 6double flange roller groups used on the following machine: BFN, ECH. 8 Single flange roller groups and 8 double flange roller groupsused on the following machine: BFX.2 Upgrade to 163-4145 Roller GP3 Used as required.4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.5 These components are not included in the roller group; quantities shown are required to mount each roller.

672


324D TRACK ROLLERS HEAVY DUTYJLS 18 Single Flange Rollers Required

JGK 20 Double Flange Rollers Required


Single Flange (SF) (Heavy Duty) -- 1 206-1264

Double Flange (DF) (Heavy Duty) -- 2 206-1263

Components of Group

Roller Shell (SF) (Heavy Duty) 1 206-9257

Roller Shell (DF) (Heavy Duty) 1 206-1262

Bearing 2 6Y-1782

Shaft 1 206-9260


Pin 2 159-9526


Toric Ring 3 2 171-5713


Plug 1 9W-2146

Mounting Hardware 4

Bolt 4 7X-2565

Washer 4 8T-4123

1 18 required machine serial number JLS.2 20 required for machine serial number JGK.3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.4 These components are not included in the roller group; quantities shown are required to mount each roller.

673


322C/B, 322 TRACK ROLLERS HEAVY DUTYStandard on the BPH (16 Required)

CAM, CBY (Use 325 Heavy Duty Single Flange 18 Required)Optional use for all other 322 machines


Single Flange (SF) -- 1 197-4161

Components of Group


Bearing 2 2 6I-9399

Shaft 1 200-6432


Pin 2 159-9526


Toric Ring 2 2 171-5713


Plug 1 9W-2146

Mounting Hardware 3

Bolt 4 7X-2565

Washer 4 8T-4123

1 Use as required2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 These components are not included in the roller group; quantities shown are required to mount each roller.

324D, 324DL CENTER GUIDING GUARDS



Bolt 8 7X-2563

Washer 8 8T-4123

Spacer 8 8V-1715

322C CENTER GUIDING GUARDS



Bolt 8 7X-2563

Washer 8 8T-4123

Spacer 8 8V-1715

674


322B CENTER GUIDING GUARDS



Bolt 8 7X-2563

Washer 8 8T-4123

Spacer 8 8V-1715




Bolt 8 8T-5460

Washer 8 8T-4123

324D TRACK ROLLER GUARDS (FULL LENGTH)



Bolt (M 20) 24 8T-5460

Washer 24 8T-4123

324DL TRACK ROLLER GUARDS (FULL LENGTH)



Bolt (M 20) 32 8T-5460

Washer 32 8T-4123

322C TRACK ROLLER GUARDS (FULL LENGTH)



Bolt (M 20) 32 8T-5460

Washer 32 8T-4123

675


324D TRACK ROLLER GUARDS (SPROCKET)



Bolt (M 20) 12 8T-5460

Washer 12 8T-4123

324DL TRACK ROLLER GUARDS (SPROCKET)



Bolt (M 20) 16 8T-5460

Washer 16 8T-4123

324D, 322C SHOE SUPPORT GUARDSCAM, CBY, LAR, C3R, JLS, JKR




Bolt (M 20) 32 8T-6430

Washer 32 8T-4123

Pipe 16 192-8460

Bolt (M 20) 16 7X-2440

Washer 32 8T-4123

Support Assembly (Nut) 16 226-5101

322CL SHOE SUPPORT GUARDSBPH




Bolt (M 20) 32 8T-6430

Washer 32 8T-4123

Pipe 16 219-8238

Bolt (M 20) 16 222-3595

Washer 32 8T-4123

Nut 16 8T-4131

676

Excavators/Front Shovels329D, 325D, 325C, 325B, 325

329DL, 329DLN, 325DL, 325DLN TRACKSLIP FIT MASTER LINKS

LAL, NAC, JCL, GPB, T2S, PEH, PAL, AZP, DAP, SCR, MCL, PKE, C4F, LWR, RJK, MNB, DJF, TAY, RSK, J9D,J8D, TPM, LFW, BFC, JHJ, SCY

8.00" (203.2 mm) PITCH -- 20 mm BOLT

QUANTITYGREASED

PART NUMBER



Track Links





Other Components

Pin 49 6Y-0851


Bushing 49 321-1462


Seal (Poly-W) 98 179-3425

Seal-Master (Poly-W) 2 179-3427

Cotter 1 095-7944

Track Hardware 1

Bolt (Grouser Shoe) 200 306-2148

Bolt (Self-Cleaning Shoe) 100 6Y-5686

Bolt (Self-Cleaning Shoe) 100 306-2148

Nut 200 9W-3361

Special Group

Pin and Bushing Group (48 Sections) (Contains Press Fit Master Pin) 1 246-1907


677


329D, 325D, 325C/B TRACKSLIP FIT MASTER LINKS

BKH, BKW, AMH, BLA 8GM, 8PR, KDG, CJM, ABD, DBH, BBF, WDK, BYS8.00" (203.2 mm) PITCH -- 20 mm BOLT

QUANTITYSEALED

PART NUMBERGREASED

PART NUMBER



Track Links

RH Master 1 115-1853 115-1853

LH Master 1 115-1854 115-1854

RH Regular 44 6Y-1607 6Y-1607

LH Regular 44 6Y-1608 6Y-1608

Other Components

Pin 44 6Y-0851 6Y-0851


Bushing 44 179-0695 321-1462

Master Bushing 1 179-0693 201-0826

Seal (Poly-W) 88 -- 179-3425

Seal-Master (Poly-W) 2 -- 179-3427


Spacer 2 6Y-0847 --

Cotter 1 095-7944 095-7944

Track Hardware 2

Bolt (Grouser Shoe) 180 306-2148 306-2148

Bolt (Self-Cleaning Shoe) 90 6Y-5686 6Y-5686

Bolt (Self-Cleaning Shoe) 90 306-2148 306-2148

Nut 180 9W-3361 9W-3361

Special Group



678


325CL, 325BL, 325BLN TRACKSLIP FIT MASTER LINKS

BLX, G1L, S2C, CSJ, DTF, JLD, JLC, BKT, BMM, BTD, BFE, CRB, 1GS, 2JR, 4DS, 5BS, 6DN, 7EN, 8FN, 8RR,5LW

8.00" (203.2 mm) PITCH -- 20 mm BOLT

QUANTITYSEALED

PART NUMBERGREASED

PART NUMBER



Track Links

RH Master 1 115-1853 115-1853

LH Master 1 115-1854 115-1854

RH Regular 47 6Y-1607 6Y-1607

LH Regular 47 6Y-1608 6Y-1608

Other Components

Pin 47 6Y-0851 6Y-0851


Bushing 47 179-0695 321-1462

Master Bushing 1 179-0693 201-0826

Seal (Poly-W) 94 -- 179-3425



Spacer 2 6Y-0847 --

Cotter 1 095-7944 095-7944

Track Hardware 2




Nut 192 9W-3361 9W-3361

Special Group



679


325 TRACKPRESS FIT MASTER LINKS

5WK, 6RM, 7TG, 8JG, 8NL, 8YK, 9SG, 9ZR8.00" (203.2 mm) PITCH -- 20 mm BOLT

QUANTITYSEALED

PART NUMBERGREASED

PART NUMBER



Track Links

RH Regular 45 6Y-1607 6Y-1607

LH Regular 45 6Y-1608 6Y-1608

Other Components

Pin 44 6Y-0851 6Y-0851


Bushing 44 179-0695 321-1462

Master Bushing 1 179-0693 201-0826

Seal (Poly-W) 88 -- 179-3425



Spacer 2 6Y-0847 --

Track Hardware 2




Nut 180 9W-3361 9W-3361

Special Group 2



680


325L, 325N, 325LN TRACKPRESS FIT MASTER LINKS

2JK, 2SK, 2SL, 3LL, 6KK, 7CJ, 7LJ, 7LM, 8NK, 9KL8.00" (203.2 mm) PITCH -- 20 mm BOLT

QUANTITYSEALED

PART NUMBERGREASED

PART NUMBER



Track Links

RH Regular 48 6Y-1607 6Y-1607

LH Regular 48 6Y-1608 6Y-1608

Other Components

Pin 47 6Y-0851 6Y-0851


Bushing 47 179-0695 321-1462

Master Bushing 1 179-0693 201-0826

Seal (Poly-W) 94 -- 179-3425



Spacer 2 6Y-0847 --

Track Hardware 2




Nut 192 9W-3361 9W-3361

Special Group 2



681


325DL FORESTRY MACHINE TRACKC7K, C9M, C8L

8.00" (203.2 mm) PITCH - 3/4" BOLT

QUANTITYGREASED

PART NUMBER



Track Links



Thrust Ring Master 2 269-4004

Bushing Master 1 269-4027



Other Components

Pin 50 198-1125

Bushing 50 8E-7222



Track Hardware 1

Bolt 200 6V-1792

Nut 200 1S-1860



682


325CL FORESTRY MACHINE TRACKM2K, S3M, Y4P

8.00" (203.2 mm) PITCH - 3/4" BOLT

QUANTITYGREASED

PART NUMBER



Track Links






Other Components

Pin 48 198-1125

Bushing 48 8E-7222



Track Hardware 1

Bolt 192 6V-1792

Nut 192 1S-1860



329D, 325D, 325C, 325B, 325 TRACK SHOES8.00" (203.2 mm) PITCH -- 20 mm BOLT


Single Grouser (Trapezoidal Opening, Clipped Grouser) 23.6" (600 mm) 6I-9854

Single Grouser (Trapezoidal Opening, Clipped Grouser) 27.6" (700 mm) 1Q-4752




Triple Grouser (Center Punched Slots) 23.6" (600 mm) 126-5064 1

Triple Grouser (Center Punched Slots) 27.6" (700 mm) 126-5065 1

Triple Grouser (Center Punched Slots) 31.5" (800 mm) 6Y-2126





Self-Cleaning 35.4" (900 mm) 6Y-5662

1 Requires 6Y-0846 Bolts

683


325D, 325C FORESTRY MACHINE TRACK SHOES8.00" (203.2 mm)PITCH - 3/4" BOLT



Single Grouser (Trapezoidal Opening, Clipped Grouser) 24" (610 mm) 207-5897 207-5898

Single Grouser (Trapezoidal Opening, Clipped Grouser) 28" (710 mm) 207-5283 207-5284



329D, 325D, 325C, 325B, 325 SPROCKETS



Bolt 18 8T-6430

Washer 18 8T-3282

325D, 325C FORESTRY MACHINE SPROCKETSM2K, S3M, Y4P, C7K, C9M, C8L


Sprocket Rim (21 Tooth) 1 200-4197

Bolt 18 8T-6430

Washer 18 8T-3282

329D, 325D, 325C, 325B IDLERS



Components of Group

Idler Assembly (540 mm Tread Diameter) 1 115-7471

Bearing 1 2 6Y-2272

Shaft 1 112-9951


Pin 2 6Y-2266




Plug 1 7H-3171


684


325D IDLERSC4F, LWR, RJK



Components of Group


Bearing 1 2 6Y-2272

Shaft 1 112-9951


Pin 2 6Y-2266




Plug 1 7H-3171


325 IDLERS



Components of Group


Bearing 1 2 6Y-2272

Shaft 1 112-9951


Pin 2 6Y-2266




Plug 1 7H-3171


685


329D, 325D, 325C, 325B, 325 CARRIER ROLLERS


Group 4 6Y-5323 1

Components of Group


Bearing 2 1 6Y-9855

Bearing 2 1 6Y-9856

Shaft 1 6Y-9858

Retainer 1 6Y-8075


Cover 1 6Y-8077

Bolt 5 8T-1159




Plug 1 7H-3171

Mounting Hardware 3

Bolt 1 8T-5878


325D CARRIER ROLLERSLWR, C7K, MCL, C9M, C8L



Components of Group


Shaft 1 247-0564



Pin 1 159-9526




Stopper 1 5G-2247

Plug 1 6Y-0473

Mounting Hardware 2

Bolt 4 7X-2565

Washer 4 8T-4123


686


329D, 325D, 325C, 325B, 325 TRACK ROLLERS


NUMBER PART NUMBER

Single Flange (SF) - 1 -- 2 247-0565

Double Flange (DF) - 3 -- 247-0566

Components of Group

Roller Shell (SF) 1 6Y-1056 6Y-1056

Roller Shell (DF) 1 -- --

Bearing 4 2 6Y-1782 6Y-1782

Shaft 1 6Y-1053 247-0564

End Collar 2 6Y-1054 158-8086


Pin 1 9W-2204 159-9526


Toric Ring 4 2 6H-1309 6H-1309


Stopper 1 5G-2247 5G-2247

Plug 1 6Y-0473 6Y-0473

Mounting Hardware 5

Bolt 4 7X-2565 7X-2565

Washer 4 8T-4123 8T-4123

1 325B, 325 machines use 14 single flange roller group. 325BL, 325L machines use 16 single flange roller groups. 329D, 325D, 325C (14)and 329DL, 325DL, 325CL (18) machines use the following roller confrigurations. 14 Single flange roller groups used on : BKN, AMH,BKW, KDG, CJM, BBF, WDK, BYS. 18 Single flange roller groups used on: CSJ, JLC, BKT, BMM, BTD, BFE, CRB, LAL, NAC, CYW, GPB,T2S, PAL, AZP, DAP, SCR, PKE, MND, DJF, TAY, RSK, TPM, BFC, J8D, J9D, JHJ, SCY. 8 Single flange roller groups and 6 double flangeroller groups are used on BLA. 10 Single flange roller groups and 8 double flange roller groups are used on BLX, PEH, LFW.2 Upgrade to 247-0565 Roller GP3 Use as required.4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.5 These components are not included in the roller group; quantities shown are required to mount each roller.

687


325D, 325C, 325B, 325 TRACK ROLLERS HEAVY DUTYStandard on the M2K, S3M, Y4P, DTF, JLD, G1L, S2C, C4F, LWR, RJK, C7K, MCL, C9M, C8L (18 Required

Single Flange)Optional use for other 325 machines


PART NUMBERPART

NUMBER

Single Flange (SF) (Heavy Duty) -- 1 -- 2 206-1264

Double Flange (DF) (Heavy Duty) -- 1 -- 3 206-1263

Components of Group


Roller Shell (DF) (Heavy Duty) 1 -- 5 206-1262

Bearing 2 -- 6Y-1782

Shaft 1 158-8089 206-9260

End Collar 2 158-8086 158-8086

Pin 2 159-9526 159-9526


Toric Ring 6 2 6H-1309 171-5713


Plug 1 6Y-0473 9W-2146

Mounting Hardware 7

Bolt 4 7X-2565 7X-2565

Washer 4 8T-4123 8T-4123

Special Application Arctic Roller Group

Single Flange (SF) - 1 -- 207-8167

Seal - Duo-Cone Group 2 -- 3P-1848

Toric Ring 6 2 -- 3P-1847

Seal 2 -- 8M-4390

1 Use as required.2 Upgrade to 206-1264 Roller GP3 Upgrade to 206-1263 Roller GP.4 Order 1 206-9257 roller assembly and 1 9W-2146 plug.5 Order 1 206-1262 roller assembly and 1 9W-2146 plug.6 Component of preceding assembly or group; quantity shown is quantity per assembly or group.7 These components are not included in the roller group; quantities shown are required to mount each roller.

329D, 325D, 325C, 325B, 325 CENTER GUIDING GUARDS



Bolt 8 7X-2563

Washer 8 8T-4123

Spacer 8 8V-1715

688


329D, 325D, 325C TRACK ROLLER GUARDS (FULL LENGTH)




Bolt (M 20) 24 8T-5460

Washer 24 8T-5439

Pipe 12 117-5612

Bolt (M 20) 12 7X-2440

Washer 24 8T-5439


329DL, 325DL TRACK ROLLER GUARDS (FULL LENGTH)




Bolt (M 20) 32 8T-5460

Washer 32 8T-5439

Pipe 16 117-5612

Bolt (M 20) 16 7X-2440

Washer 32 8T-5439


325CL TRACK ROLLER GUARDS (FULL LENGTH)




Bolt (M 20) 32 8T-5460

Washer 32 8T-5439

Pipe 16 117-5612

Bolt (M 20) 16 7X-2440

Washer 32 8T-5439


689


329D, 325D TRACK ROLLER GUARDS (SPROCKET)




Bolt (M 20) 12 8T-5460

Washer 12 8T-5439

Pipe 6 117-5612

Bolt (M 20) 6 7X-2440

Washer 12 8T-5439


329DL, 325DL TRACK ROLLER GUARDS (SPROCKET)




Bolt (M 20) 16 8T-5460

Washer 16 8T-5439

Pipe 8 117-5612

Bolt (M 20) 8 7X-2440

Washer 16 8T-5439


325D SHOE SUPPORT GUARDSFOR MACHINE SERIAL NUMBERS C9M, C8L, C7K




Bolt (M 20) 32 8T-6430

Washer 32 8T-4123

Pipe 16 192-8460

Bolt (M 20) 16 7X-2440

Washer 32 8T-4123


690


325C SHOE SUPPORT GUARDS




Bolt (M 20) 32 8T-6430

Washer 32 8T-4123

Pipe 16 192-8460

Bolt (M 20) 16 7X-2440

Washer 32 8T-4123


325CL SHOE SUPPORT GUARDS




Bolt (M 20) 32 8T-6430

Washer 32 8T-4123

Pipe 16 192-8460

Bolt (M 20) 16 7X-2440

Washer 32 8T-4123

Support Assembly (Nut) 16 8T-4131

691

Excavators/Front Shovels336D, 330D, 330C, 330B, 330, 328D

336D, 330D, 330C/B TRACKSLIP FIT MASTER LINKS

BTM, GAG, JAB, MCA, 4YW, 5EZ, 8SR, 9HN, KAB, PCK, MEY, EAH, KKT, JER, EMX, JBT8.50" (215.9 mm) PITCH -- 22 mm BOLT

QUANTITYSEALED

PART NUMBERGREASED

PART NUMBER



Track Links

RH Master 1 118-7302 118-7302

LH Master 1 118-7303 118-7303

RH Regular 44 6Y-2589 6Y-2589

LH Regular 44 6Y-2590 6Y-2590

Other Components

Pin 44 6Y-2751 6Y-2751


Bushing 44 123-0025 321-1463

Master Bushing 1 123-0026 201-0828

Seal (Poly-W) 88 -- 179-3426



Spacer 2 6Y-2749 --

Cotter 1 095-7944 095-7944

Track Hardware 2

Bolt 180 318-2559 318-2559

Bolt (Use with Heavy Duty Shoes) 180 318-2558 318-2558

Nut 180 311-8150 311-8150

Special Group


1 Upgrade to 201-91182 Not part of link assembly; required to assemble track group.

692


336DL, 336DLN, 330DL, 330DLN, 330CL, 330BL, 330BLN, 328DL TRACKSLIP FIT MASTER LINKS

KDD, RBH, CYA, B3M, CGZ, JCD, JNK, HAA, GKX, DKY, CAP, 1JS, 2RR, 3YR, 4RS, 5LR, 5LS, 6DR, 8TR, 3ZZ,FFK, GKX, EDX, HAS, B6H, MWP, T2Y, JLP, FFK, NBD, THJ, GBC, RAS, ERN, RDA, LDR, GGE, C5K, LEM, PEL,

LRM, GTN, MKR, PRF, MPL, NLS, SKE, WET, DTS, KDJ, MYP, JBF, W3K, D3P, JZZF, M4T, J6D8.50" (215.9 mm) PITCH -- 22 mm BOLT

QUANTITYSEALED

PART NUMBERGREASED

PART NUMBER



Track Links

RH Master 1 118-7302 118-7302

LH Master 1 118-7303 118-7303

RH Regular 48 6Y-2589 6Y-2589

LH Regular 48 6Y-2590 6Y-2590

Other Components

Pin 48 6Y-2751 6Y-2751


Bushing 48 123-0025 321-1463

Master Bushing 1 123-0026 201-0828

Seal (Poly-W) 96 - 179-3426

Seal-Master (Poly-W) 2 - 179-3428

Seal (Spring Washer) 196 6Y-2750 -

Spacer 2 6Y-2749 -

Cotter 1 095-7944 095-7944

Track Hardware 2

Bolt 196 318-2559 318-2559


Nut 196 311-8150 311-8150

Special Group



336DL, 336DLN, 330DL, 330DLN, 330CL, 330BL, 330BLN, 328DL MADE TO ORDER (MTO)TRACK GROUPS

TRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIESSLIP FIT MASTER LINKS



Triple Grouser Shoe -- 33.5" (850 mm) 2 203-0859

Triple Grouser Shoe -- 33.5" (850 mm) (HD) 2 203-0862

693


330 TRACKPRESS FIT MASTER LINKS

2ZM, 6ZK, 8RL, 9NG, 9PJ, 9WJ8.50" (215.9 mm) PITCH -- 22 mm BOLT

QUANTITYSEALED

PART NUMBERGREASED

PART NUMBER



Track Links

RH Regular 45 6Y-2589 6Y-2589

LH Regular 45 6Y-2590 6Y-2590

Other Components

Pin 44 6Y-2751 6Y-2751


Bushing 44 123-0025 321-1463

Master Bushing 1 123-0026 201-0828

Seal (Poly-W) 88 - 179-3426

Seal-Master (Poly-W) 2 - 179-3428


Spacer 2 6Y-2749 -

Track Hardware 2

Bolt 180 318-2559 318-2559


Nut 180 311-8150 311-8150

Special Group



694


330L, 330LN TRACKPRESS FIT MASTER LINKS

2EL, 5YM, 6SK, 6WJ, 8CK, 8FK, 9ML8.50" (215.9 mm) PITCH -- 22 mm BOLT

QUANTITYSEALED

PART NUMBERGREASED

PART NUMBER



Track Links

RH Regular 49 6Y-2589 6Y-2589

LH Regular 49 6Y-2590 6Y-2590

Other Components

Pin 48 6Y-2751 6Y-2751


Bushing 48 123-0025 321-1463

Master Bushing 1 123-0026 201-0828

Seal (Poly W) 96 - 179-3426

Seal - Master (Poly W) 2 179-3428


Spacer 2 6Y-2749 -

Track Hardware 2

Bolt 196 318-2559 318-2559


Nut 196 311-8150 311-8150

Special Group



695


330D FORESTRY MACHINE TRACKL2K, E4K, H3K

8.50" (215.9 mm) PITCH - 24mm BOLT



Track Links




Other Components

Pin 48 8E-4272


Bushing 48 227-3029






Stopper 1 7G-4332

Plug 1 6Y-0473

Track Hardware 2

Bolt 196 150-4741 3

Nut 196 150-4742

1 For 52 section link assembly order 301-2287.2 Not part of link assembly; required to assemble track group3 Serviced Replaced By: 301-2299.

696


330CL FORESTRY MACHINE TRACKB2L, B4N, B1K

8.50" (215.9 mm) PITCH - 24 mm BOLT



Track Links




Other Components

Pin 48 8E-4272


Bushing 48 1M-3669



Spacer 2 8M-6238

Track Hardware 1

Bolt 196 150-4741 2

Nut 196 150-4742

Special Group

Pin and Bushing Group (52 Section) 1 206-6004

1 Not part of link assembly; required to assemble track group2 Serviced Replaced By: 301-2299.

336D, 330D, 330C, 330B, 330, 328D TRACK SHOES8.50" (215.9 mm) PITCH -- 22 mm BOLT


Single Grouser (Clipped Grouser, Trapezoidal Opening) 23.6" (600 mm) 6I-9893

Single Grouser (Clipped Grouser) 27.6" (700 mm) 1Q-4769

Double Grouser 23.6" (600 mm) 6I-8454

Double Grouser 27.6" (700 mm) 6I-8455



Triple Grouser (Center Punched Slots) 27.6" (700mm) 238-8591



Triple Grouser (Center Punched Slots) 33.5" (850 mm) 6Y-8180




Self-Cleaning 33.5" (850 mm) 5Q-3252

697


330D, 330CL FORESTRY MACHINE TRACK SHOESB2L, B4N, B1K, L2K, E4K, H3K

8.50" (215.9 mm) PITCH -- 24 mm BOLT



Triple Grouser (Heavy Duty Center Punched Slots) 33.5" (850 mm) 215-2986

336D, 330D, 330C, 330B, 330, 328D SPROCKETS



Bolt 16 7X-2575

330D, 330CL FORESTRY MACHINE SPROCKETSB2L, B4N, B1K, L2K, E4K, H3K



Bolt 16 7X-2575

336D, 330D, 330C, 330B, 330, 328D IDLERS


NUMBER PART NUMBER

Idler Group 2 102-8152 1 136-2422

Components of Group

Idler Assembly (635 mm Tread Diameter) 1 136-3847 136-3847

Bearing 2 2 6Y-8023 6Y-8023

Shaft 1 6Y-8028 6Y-8028

Bearing Block 2 7Y-1248 115-3699

Pin 2 6Y-8029 6Y-8029


Toric Ring 2 2 5P-9120 5P-9120


Plug 1 7H-3171 7H-3171

1 Use on model 330 only.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

698


330D, 330CL FORESTRY MACHINE IDLERSB2L, B4N, B1K, L2K, E4K, H3K



Components of Group


Bearing 1 2 124-9979

Shaft 1 124-9978


Pin 2 094-3709




Plug 1 7H-3171


330D IDLERSFOR MACHINE SERIAL NUMBERS C5K, LEM, PEL



Components of Group


Bearing 1 2 6Y-8023

Shaft 1 6Y-8028


Pin 2 6Y-8029




Plug 1 7H-3171


699


336D, 330D, 330C, 330B, 330, 328D CARRIER ROLLERS


Group 4 6Y-5323 1

Components of Group


Bearing 2 1 6Y-9856

Shaft 1 6Y-9858

Retainer 1 6Y-8075


Cover 1 6Y-8077

Bolt 5 8T-1159




Plug 1 7H-3171

Mounting Hardware 3

Bolt 1 7X-2577


330D CARRIER ROLLERSFOR MACHINE SERIAL NUMBERS PEL, L2K, E4K, H3K, ERN, THJ



Components of Group


Shaft 1 183-2883


Pin 2 179-1499


Toric Ring 1 2 160-6631


Plug 1 9W-2146

Mounting Hardware 2

Bolt 4 7X-2454

Washer 4 8T-4167


Bearing 2 1 6Y-9855

1 Service Replaced by: 300-4545.2 Component of preceding assembly or group.3 Not included in roller group; quantity shown is required to mount each roller.

700


336D, 330D, 330C, 330B, 330 TRACK ROLLERS

(PER MACHINE) QUANTITYEARLY PART

NUMBERFORMER PART

NUMBER PART NUMBER

Single Flange (SF) - 1 -- 2 -- 2 179-1486

Double Flange (DF) - 3 -- 4 -- 4 179-1491

Components of Group

Roller Shell (SF) 1 6Y-2794 6Y-2794 179-1488

Roller Shell (DF) 1 -- 5Q-3217 179-1492

Bearing 5 2 6Y-2792 6Y-2792 6Y-2792

Shaft 1 6Y-2790 158-8090 183-2883

End Collar 2 6Y-2791 158-8087 179-1497

Retaining Ring 1 6Y-8852 158-8097 --

Pin 2 -- -- 179-1499

Pin 1 9W-2212 159-9527 --

Seal -- Duo-Cone Group 2 148-3533 148-3533 148-3533

Toric Ring 5 2 160-6631 160-6631 160-6631

Seal -- Shaft O-Ring 2 8F-8882 8F-8882 8F-8882

Plug 1 -- -- 9W-2146

Stopper 1 5G-2247 5G-2247 --

Plug 1 6Y-0473 6Y-0473 --

Mounting Hardware 6

Bolt 4 7X-2454 7X-2454 7X-2454

Washer 4 8T-4167 8T-4167 8T-4167

1 330B, 330 machines use 14 single flange roller groups. 330BL, 330L machines use 16 single flange roller groups. 330D, 330C and 330DL,330CL machines use the following roller configurations. 14 single flange roller groups used on : GAG, JAB, MCA, KAB, MEY. 18 Singleflange roller groups used on: KDD, CYA, CGZ, JNK, HAA, GKX, DKY, CAP, GBC, RAS, LDR, LRM, GGE, EDX, HAS, B6H, T2Y, JLP, NBD. 8Single flange roller groups and 6 double flange roller groups used on BTM, PCK. 10 Single flange roller groups and 8 double flange rollergroups used on RBH, RDA. 336D machines using 14 single flange roller groups: KKT, JBT, JER. 336D machine using 8 single flange rollergroups and 6 double flange roller groups: EMX. 336DL machines using 18 single flange roller groups: PRF, MPL, NLS, WET, KDJ, MYP,J6D. 336DL machine using 10 single flange roller groups and 8 double flange roller groups: SKE.2 Upgrade to 179-1486 roller group.3 Use as required.4 Upgrade to 179-1491 roller group.5 Component of preceding assembly or group; quantity shown is quantity per assembly or group.6 These components are not included in the roller group; quantities shown are required to mount each roller.

701


336D, 330D, 330C, 330B, 330, 328D TRACK ROLLERS HEAVY DUTYStandard on the B3M, JCD, ERN, MWP, THJ, C5K, LEM, PEL, GTN, MKR, DTS, JBF, W3K, D3P, JZF, M4T (18

Required Single Flange)B2L, B4N, B1K, L2K, E4K, H3K (Use 345 Single Flange Roller Group 18 Required)

Optional use for other 330 machines


NUMBERFORMER PART

NUMBER PART NUMBER

Single Flange (SF) (Heavy Duty) - 1 -- 2 -- 2 183-2874

Double Flange (DF) (Heavy Duty) - 1 -- 3 -- 3 183-2879

Components of Group

Roller Shell (SF) (Heavy Duty) 1 152-4140 152-4140 183-2875

Roller Shell (DF) (Heavy Duty) 1 -- 165-0069 183-2880

Bearing 4 2 6Y-2792 6Y-2792 6Y-2792

Shaft 1 6Y-2790 158-8090 183-2883

End Collar 2 6Y-2791 158-8087 179-1497

Pin 2 -- -- 179-1499

Retaining Ring 1 6Y-8852 158-8097 --

Pin 1 9W-2212 159-9527 --


Toric Ring 4 2 160-6631 160-6631 160-6631

Seal -- Shaft O-Ring 2 8F-8882 8F-8882 8F-8882

Plug 1 -- -- 9W-2146

Stopper 1 5G-2247 5G-2247 --

Plug 1 6Y-0473 6Y-0473 --

Mounting Hardware 5

Bolt 4 7X-2454 7X-2454 7X-2454

Washer 4 8T-4167 8T-4167 8T-4167

1 Use as required.2 Upgrade to 183-2874 roller group.3 Upgrade to 183-2879 roller group.4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.5 These components are not included in the roller group; quantities shown are required to mount each roller.

336D, 330D, 330C, 328D CENTER GUIDING GUARDS



Bolt 8 8T-5379

Washer 8 8T-4167




Bolt 8 8T-5379

Washer 8 8T-4167

702





Bolt 8 8T-5379

Washer 8 8T-4167

336D, 330D, 330C TRACK ROLLER GUARDS (FULL LENGTH)




Bolt (M 24) 24 8T-5379

Washer 24 8T-4167

Pipe 12 192-8358

Bolt (M 24) 12 140-3048

Washer 24 8T-4167


336DL, 330DL, 330CL, 328DL TRACK ROLLER GUARDS (FULL LENGTH)




Bolt (M 24) 32 8T-5379

Washer 32 8T-4167

Pipe 16 192-8358

Bolt (M 24) 16 140-3048

Washer 32 8T-4167


336D, 330D TRACK ROLLER GUARDS (SPROCKET)




Bolt (M 24) 12 8T-5379

Washer 12 8T-4167

Pipe 6 192-8358

Bolt (M 24) 6 140-3048

Washer 12 8T-4167


703


336DL, 330DL, 328DL TRACK ROLLER GUARDS (SPROCKET)




Bolt (M 24) 16 8T-5379

Washer 16 8T-4167

Pipe 8 192-8358

Bolt (M 24) 8 140-3048

Washer 16 8T-4167


330CL SHOE SUPPORT GUARDS




Bolt (M 24) 32 8T-5379

Washer 32 8T-4167

Pipe 16 192-8358

Bolt (M 24) 16 140-3048

Washer 16 8T-4167


330D, 330CL FORESTRY MACHINE SHOE SUPPORT GUARDSL2K, E4K, H3K




Bolt (M 24) 32 7X-2575

Washer 32 8T-4167

Pipe 16 218-5439

Bolt (M 24) 16 132-5794

Washer 16 8T-4167


704

Excavators/Front Shovels345D, 345C, 345B

345D, 345DL, 345C, 345CL, 345B, 345BL TRACKGREASE LUBRICATED

345D, 345C, 345B (49 SECTION): MDC, JAR, BWY, 2NW, 6MW, 6XS, 8KW, AGS, AMD, AMN, NEG, BYW, FES345DL, 345CL, 345BL (52 SECTION): RFN, GBH, PJW, DHP, SRY, TDG, GJR, LYS, CPX, ESD, TBA, WDE, M2R,

D3S, AYF, TAJ, BZN, ELS, CWG, GCL, KBA, GPH, 2SW99-UP, 4SS357-UP, 5WS, 7KS200-UP, 8RW, 9CW,9GS166-UP, DPA, HLC, PBT, JKN, EEH, TKH, RAJ, RGG, MLK, RDC, RAE, YEE, RBT, RGD

8.50" (215.9 mm) PITCH - 24 mm BOLT




Track Links

RH Regular 305-9363 49 52

LH Regular 305-9364 49 52

Other Components

Pin 8E-4272 48 51

Master Pin 253-2740 1 1

Bushing 227-3029 48 51

Master Bushing 251-8368 1 1 1


Seal Assembly - Master (Rigid) 251-7757 2 2


Thrust Ring - Master 251-8364 2 2

Stopper 7G-4332 1 1

Plug 6Y-0473 1 1

Track Hardware 2

Bolt 150-4741 3 196 208

Nut 150-4742 196 208

Special Group

Pin and Bushing Group (52 Sections) 299-1689 1 1

1 Former master bushing 233-1634, serviced replaced by: (1) 251-8386 master bushing, (2) 251-7757 master seal assembly, (2) 251-8364master thrust ring.2 Not part of Link Assembly; required to assemble track group.3 Serviced Replaced By: 301-2299.

705


345D, 345DL, 345C, 345CL, 345B, 345BL TRACKGREASE LUBRICATED/POSITIVE PIN RETENTION 2 (PPR2)

345D, 345C, 345B (49 SECTION): MDC, JAR, BWY, 2NW, 6MW, 6XS, 8KW, AGS, AMD, AMN, NEG, BYW, FES345DL, 345CL, 345BL (52 SECTION): RFN, GBH, PJW, DHP, SRY, TDG, GJR, LYS, CPX, ESD, TBA, WDE, M2R,

D3S, AYF, TAJ, BZN, ELS, CWG, GCL, KBA, GPH, 2SW99-UP, 4SS357-UP, 5WS, 7KS200-UP, 8RW, 9CW,9GS166-UP, DPA, HLC, PBT, JKN, EEH, TKH, RAJ, RGG, MLK, RDC, RAE, YEE, RBT, RGD

8.50" (215.9 mm) PITCH - 24 mm BOLT




Track Links

RH Regular 305-9361 49 52

LH Regular 305-9362 49 52

Other Components

Pin 252-4429 48 51

Master Pin 257-3604 1 1

Bushing 227-3029 48 51



Seal Assembly - Master (Rigid) 251-7757 2 2



Track Hardware 1

Bolt 301-2299 196 208

Nut 150-4742 196 208

1 Not part of Link Assembly; required to assemble track group.

706


345B, 345BL TRACK345B (49 SECTION): 2NW, 6MW, 6XS, 8KW, AGS, AMD, AMN

345BL (52 SECTION):2SW99-UP, 4SS357-UP, 5WS, 7KS200-UP, 8RW, 9CW, 9GS166-UP8.50" (215.9 mm) PITCH -- 24 mm BOLT


Link Assembly -- (Quantity 2) -- 1 -- 2

Track Links

RH Regular 209-6383 49 52

LH Regular 209-6384 49 52


Other Components

Pin 8E-4272 48 51

Master Pin 211-3295 1 1

Bushing 1M-3669 48 51

Master Bushing 1M-3670 1 1

Seal (Spring Washer) 8M-6239 196 208

Spacer 8M-6238 2 2

Track Hardware 3

Bolt 150-4741 4 196 208

Nut 150-4742 196 208

Special Group

Pin and Bushing Group (52 Section) 206-6004 1 1

1 Upgrade to 301-2307 link assembly.2 Upgrade to 301-2287 link assembly.3 Not part of link assembly; required to assemble track group4 Serviced Replaced By: 301-2299.

707


345BL TRACK2SW1-98, 4SS1-356, 7KS1-199, 9GS1-1658.50" (215.9 mm) PITCH -- 22 mm BOLT




Track Links



Other Components

Pin 51 8E-4272


Bushing 51 1M-3669



Spacer 2 8M-6238

Track Hardware 2

Bolt 208 6Y-9024

Nut 208 9W-4381

Special Group


1 Now being serviced by link assembly 301-2287 using 24 mm hardware. Rework to current shoe requires 24 mm hardware, or order newshoes with 24 mm bolt holes. If bolt loosening is not a problem, use 235 track chain 288-5755, and remove one section. This chain can beused with 22 mm hardware.2 Not part of link assembly; required to assemble track group

345D, 345C, 345B TRACK SHOES8.50" (215.9 mm) PITCH -- 24 mm BOLT

TYPE WIDTH PLATE THICKNESS PART NUMBER

Single Grouser (Clipped Grouser) 29.5" (750 mm) 17.0 mm 155-7420

Double Grouser (Trapezoidal Opening) 23.6" (600 mm) 15.5 mm 150-4768

Double Grouser (Trapezoidal Opening) (Clipped Grouser) 23.6" (600 mm) 15.5 mm 164-4085



Triple Grouser (Center Punched Slots) 23.6" (600 mm) 14.0 mm 150-4764




Triple Grouser 39.4" (1000 mm) 15.5 mm 214-3529

708


345B TRACK SHOES8.50" (215.9 mm) PITCH -- 22 mm BOLT





345D, 345C, 345B SPROCKETS



Bolt 20 7X-2575

345D, 345C, 345B IDLERS



Components of Group


Bearing 1 2 124-9979

Shaft 1 124-9978


Pin 2 094-3709




Plug 1 7H-3171


709


345D, 345C, 345B IDLERSCAST DESIGN



Components of Group


Bearing 1 2 124-9979

Shaft 1 293-8216


Pin 2 094-3709




Plug 1 7H-3171


345D CARRIER ROLLERS


Group - 1 300-4610

Components of Group

Roller Assembly 1 300-4606

Bearing 2 1 6Y-8171

Bearing 1 6Y-8172

Shaft 1 300-4608

Retainer 1 6Y-9339


Cover 1 320-2677

Bolt 5 8T-0273

Washer 3 3H-7654



Plug 1 7H-3171

Mounting Hardware 3

Bolt 1 7X-2583

1 Quantities per machine configuration vary. Check machine for quantity required.2 Component of preceding assembly or group3 Not included in roller group; quantity shown is required to mount each roller

710


345C, 345B CARRIER ROLLERS


Group - 1 300-4610

Components of Group


Bearing 2 1 6Y-8171

Bearing 1 6Y-8172

Shaft 1 124-7276

Retainer 1 6Y-9339


Cover 1 6Y-8177 3

Bolt 5 8T-8441



Plug 1 7H-3171

Mounting Hardware 4

Bolt 1 7X-2583

1 Quantities per machine configuration vary. Check machine for quantity required.2 Component of preceding assembly or group3 Service Replaced by 320-2677.4 Not included in roller group; quantity shown is required to mount each roller

345D, 345C, 345B TRACK ROLLERSCURRENT DESIGN




Components of Group



Bearing 3 2 123-1382

Shaft 1 178-7297


Dowel 2 179-4182


Toric Ring 3 2 176-5333


Plug 1 9W-2146

Mounting Hardware 4

Bolt 4 8T-0363

Washer 4 8T-4167

1 18 rollers required with long undercarriage.2 Use as required.3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.4 These components are not included in the roller group; quantities shown are required to mount each roller.

711


345B TRACK ROLLERSFORMER DESIGN


Single Flange (SF) 16 1 -- 2

Double Flange (DF) - 3 -- 4

Components of Group

Roller Shell (SF) 1 -- 5

Roller Shell (DF) 1 -- 6

Bearing 7 2 123-1382

Shaft 1 158-7913



Pin 1 159-0049


Toric Ring 7 2 176-5333

Shaft O-Ring 2 175-7897

Stopper 1 5G-2247

Plug 1 6Y-0473

Mounting Hardware 8

Bolt 4 8T-0363

Washer 4 8T-4167

1 18 rollers required with long undercarriage.2 Upgrade to 178-7293 roller group.3 Use as required.4 Upgrade to 179-2395 roller group.5 Roller Shell canceled and replaced by: 1 - Roller Shell - 178-7294, 1 - Plug - 9W-2146.6 Roller Shell canceled and replaced by: 1 - Roller Shell - 179-2396, 1 - Plug - 9W-2146.7 Component of preceding assembly or group; quantity shown is quantity per assembly or group.8 These components are not included in the roller group; quantities shown are required to mount each roller.

345D, 345DL, 345C, 345CL, 345B, 345BL CENTER GUIDING GUARDSFIXED GAUGE MACHINES



Bolt 16 7X-2576

Spacer 16 7Y-0336

345DL, 345CL, 345BL CENTER GUIDING GUARDSVARIABLE GAUGE



Bolt 8 7X-2575

Washer 8 8T-4167

712


345D, 345C, 345B TRACK ROLLER GUARDS (FULL LENGTH)



Pipe 14 130-4499

Bolt 14 140-3048

Washer 28 8T-4167


Bolt 32 7X-2576

Spacer 32 7Y-0336

345DL, 345CL, 345BL TRACK ROLLER GUARDS (FULL LENGTH)




Pipe 16 130-4499

Bolt 16 140-3048

Washer 32 8T-4167


Bolt 32 7X-2576

Spacer 32 7Y-0336

345DL, 345CL,345BL TRACK ROLLER GUARDS (SPROCKET)




Pipe 8 130-4499

Bolt 8 140-3048

Washer 16 8T-4167


Bolt 16 7X-2576

Spacer 16 7Y-0336

713

Excavators/Front Shovels350

350, 350L TRACK350 (47 SECTION): 2ZL, 7RK, 8HK

350L (51 SECTION): 3ML, 9DK, 9FL9.00" (228.6 mm) PITCH -- 22 mm BOLT


Link Assembly -- (Quantity 2) 8E-6089 8E-6090


Track Links



Other Components

Pin 1M-1455 46 50

Master Pin 8E-6094 1 1

Bushing 8E-6095 46 50

Master Bushing 8E-6096 1 1


Spacer 8M-2621 2 2

Track Hardware 1

Bolt 143-4891 188 204

Bolt 2 6Y-9024 188 204

Nut 9W-4381 188 204

Special Group


1 Not part of link assembly; required to assemble track group.2 Shorter bolt for use with 600 mm triple grouser shoe, with plate thickness 14.0 mm.

350 TRACK SHOES9.00" (228.6 mm) PITCH -- 22 mm BOLT

TYPE WIDTH PLATE THICKNESS PART NUMBER

Single Grouser (Trap, Clip Grouser) 27.6" (700 mm) 19.0 mm 108-4605

Double Grouser (Trap) 23.6" (600 mm) 19.0 mm 166-4927

Double Grouser (Trap, Clip Grouser) 23.6" (600 mm) 19.0 mm 166-4928

Double Grouser (Trap) 29.5" (750 mm) 19.0 mm 166-4929

Triple Grouser (Center Punched Slots) 23.6" (600 mm) 14.0 mm 8E-6097



Triple Grouser (Center Punched Slots) 33.5" (850 mm) 15.5 mm 1Q-4774


714


350 SPROCKETS



Bolt 23 7X-2575

350 IDLERS


NUMBER PART NUMBER

Idler Group 2 -- 1 135-8903

Components of Group

Idler Assembly 1 138-8389 138-8389

Bearing 2 2 8E-4343 8E-4343

Shaft 1 8E-4335 8E-4335

Bearing Block 2 7Y-1871 135-8920

Pin 2 094-3709 094-3709


Toric Ring 2 2 6Y-8134 6Y-8134


Plug 1 7H-3171 7H-3171

1 Upgrade to 135-8903 Idler Gp.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

350 CARRIER ROLLERS


Group 6 8E-4623

Components of Group


Bearing 1 1 6Y-8171

Bearing 1 1 6Y-8172

Shaft 1 8E-4621

Retainer 1 6Y-9339


Cover 1 6Y-8177

Bolt 5 8T-8441


Toric Ring 1 2 096-4255

Cover 1 4H-9105

Plug 1 7H-3171

Mounting Hardware 2

Bolt 1 7X-2584


715


350 TRACK ROLLERS


NUMBERFORMER PART

NUMBER PART NUMBER

Single Flange (SF) 16 -- 1 -- 1 189-0475

Double Flange (DF) - 2 -- 3 -- 3 189-0794

Components of Group

Roller Shell (SF) 1 152-4142 152-4142 189-0479

Roller Shell (DF) 1 152-4147 152-4147 189-0795

Bearing 4 2 8E-4284 8E-4284 8E-4284

Shaft 1 8E-4285 158-7915 189-0476

End Collar 2 8E-4283 158-7908 178-7296

Retaining Ring 1 8E-4282 158-8098 --

Pin 2 -- -- 179-4182

Pin 1 8E-4281 159-0049 --


Toric Ring 4 2 5P-9120 176-5333 176-5333

Seal -- Shaft O-Ring 2 1H-7339 1H-7339 1H-7339

Plug 1 -- -- 9W-2146

Stopper 1 5G-2247 5G-2247 --

Plug 1 6Y-0473 6Y-0473 --

Mounting Hardware 5

Bolt 4 8T-0363 8T-0363 8T-0363

Washer 4 8T-4167 8T-4167 8T-4167

1 Upgrade to 189-0475 Roller GP2 Use as required.3 Upgrade to 189-0794 Roller GP4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.5 These components are not included in the roller group; quantities shown are required to mount each roller.




Bolt 8 7X-2575

Washer 8 8T-4167

716

Excavators/Front Shovels365CL, 365BL

365BL TRACK4XZ, 9PZ, 9TZ, AGD

10.25" (260.4 mm) PITCH -- 27 mm BOLT

QUANTITYSEALED

PART NUMBER



Track Links



Other Components

Pin 46 2M-5652


Bushing 46 8E-1886

Master Bushing 1 8E-1887

Seal 188 1S-4446

Spacer 2 1S-4445

Track Hardware 2

Bolt 188 144-0805

Nut 188 144-0806

Special Group


1 Service replaced by link assembly 246-0504.2 Not part of link assembly; required to assemble track group.

717


365CL, 365BL, GREASE TRACKMEM, MCS, FEN, ELC, MCY, 4XZ, 9PZ, 9TZ, AGD

10.25" (260.4 mm) PITCH -- 27 mm BOLT

QUANTITYGREASED

PART NUMBER



Track Links



Other Components

Pin 46 2M-5652


Bushing 46 245-3805






Stopper 1 7G-4332

Plug 1 6Y-0473

Track Hardware 1

Bolt 188 144-0805

Nut 188 144-0806

Special Group

Pin and Bushing Group 1 299-1690


718


365C, 365B, TRACK GREASE LUBRICATED/POSITIVE PIN RETENTION (PPR2)MEM, MCS, FEN, ELC, MCY, 4XZ, 9PZ, 9TZ, AGD

10.25" (260.4 mm)PITCH -- 27 mm BOLT




Track Links



Other Components

Pin 46 294-3061


Bushing 46 245-3805


Seal 92 248-1537

Master Seal 2 244-8697


Thrust Ring Master 2 245-3808

Track Hardware 1

Bolt 188 144-0805

Nut 188 144-0806


365CL, 365BL TRACK SHOES

(PER MACHINE) WIDTH PLATE THICKNESS PART NUMBER

Double Grouser (Trapezoidal opening) 25.6" (650 mm) 20.5 mm 144-8598

Double Grouser (Center Punched) 29.5" (750 mm) 19.0 mm 144-8602



365CL, 365BL SPROCKETS


Sprocket Rim (21 tooth) 1 141-9655

Bolt 21 145-2970

Washer 21 9X-8399

719


365CL, 365BL IDLERS



Components of Group


Bearing 1 2 6Y-7599

Shaft 1 6Y-7602


Pin 2 6Y-7603




Plug 1 7H-3171


365C, 365CL, 365B, 365BL IDLERSCAST DESIGN



Components of Group


Bearing 1 2 6Y-7599

Shaft 1 293-8217


Pin 2 6Y-7603


Toric Ring 2 6Y-7592


Plug 1 7H-3171


720


365CL, 365BL CARRIER ROLLERS


Group 6 300-4611

Components of Group


Bearing 1 1 6Y-8171

Bearing 1 6Y-8172


Retainer 1 6Y-9339


Cover 1 6Y-8177

Bolt 5 8T-8441


Toric Ring 1 2 171-5713

Plug 1 7H-3171

Mounting Hardware 2

Bolt 1 7X-2584


365CL, 365BL TRACK ROLLERS




Components of Group



Bearing 2 2 145-2295

Shaft 1 178-7292


Dowel 2 178-7540


Toric Ring 2 2 176-5334


Plug 1 9W-2146

Mounting Hardware 3

Bolt 4 107-3953

Washer 4 9X-8258


721


365CL, 365BL CENTER GUIDING GUARDS



Bolt 8 8C-8723

Spacer 8 148-3111

722

Excavators/Front Shovels375, 5080

375, 375L, 5080 TRACK375, 5080 (47 SECTION): 6NK, 8WJ, 8XG, 6XK, 8SL

375L (51 SECTION): 1JM, 6RL, 9WL10.25" (260.4 mm) PITCH -- 27 mm BOLT

SEALED PARTNUMBER 47 SECTION 51 SECTION

Link Assembly (Quantity 2) 6Y-7453 107-0669


Track Links

RH Regular 6Y-6721 47 51

LH Regular 6Y-6722 47 51

Other Components

Pin 2M-5652 46 50


Bushing 8E-1886 46 50



Spacer 1S-4445 2 2

Track Hardware 1

Bolt 6Y-7432 188 204

Nut 6Y-7433 188 204

Special Group



375, 5080 TRACK SHOES10.25" (260.4 mm) PITCH -- 27 mm BOLT


Single Grouser 24.0" (610 mm) 6Y-7610


Double Grouser (Trapezoidal Opening, Clip Grouser) 24.0" (610 mm) 166-4930


Double Grouser (Trapezoidal Opening) 1 35.4" (900 mm) 166-4933

1 Use only on 375.

375, 5080 SPROCKETS



Bolt 23 7Y-1810

Washer 23 9X-8399

723


375, 5080 IDLERS



Components of Group


Bearing 1 2 6Y-7599

Shaft 1 6Y-7602


Pin 2 6Y-7603



Plug 1 7H-3171

1 Component of preceding assembly or group; quantity shown per assembly or group.

375, 5080 CARRIER ROLLERS


Group 6 242-4066

Components of Group


Bearing 1 1 6Y-8171

Bearing 1 1 6Y-8172


Retainer 1 6Y-9339


Cover 1 6Y-8177

Bolt 5 8T-8441


Toric Ring 1 2 171-5713


Plug 1 7H-3171

Mounting Hardware 2

Bolt 1 7X-2584


724


375, 5080 TRACK ROLLERS


NUMBERFORMER PART

NUMBER PART NUMBER

Single Flange (SF) 161 1

185-5065

Double Flange (DF) - 2 3 3185-5102

Components of Group

Roller Shell (SF) 1 152-4144 152-4144 185-5093

Roller Shell (DF) 1 152-4149 152-4149 185-5106

Bearing 4 2 6Y-8127 6Y-8127 6Y-8127

Shaft 1 6Y-8129 158-7918 178-7292

End Collar 2 6Y-8128 158-7910 178-7291

Retaining Ring 1 6Y-8130 158-8099 --

Pin 2 -- -- 178-7540

Pin 1 6Y-8131 159-0050 --


Toric Ring 4 2 176-5334 176-5334 176-5334

Seal -- Shaft O-Ring 2 175-7900 175-7900 175-7900

Plug 1 -- -- 9W-2146

Stopper 1 5G-2247 5G-2247 --

Plug 1 6Y-0473 6Y-0473 --

Mounting Hardware 5

Bolt 4 107-3953 107-3953 107-3953

Washer 4 9X-8258 9X-8258 9X-8258

1 Upgrade to 185-5065 Roller Group2 Use as required.3 Upgrade to 185-5102 Roller GP4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.5 These components are not included in the roller group; quantities shown are required to mount each roller.




Bolt 8 7Y-5232

Washer 8 9X-8258

725


5080 TRACK ROLLER GUARDS


Guard Assembly 2 123-5540 1




Pipe 14 7Y-2914

Bolt 14 105-6203



Bolt 28 7Y-5232

Washer 56 9X-8258

1 These 2 guard assemblies replaced 101-2164.2 These 2 guard assemblies replaced 101-2165.

726

Excavators/Front Shovels385C, 385B, 5090

385C, 385CL, 385C FS, 385B, 385BL 5090B GREASE TRACK385C, 385C FS, 385B, 5090B (47 Section): KBC, MNZ, JCM, BKF, BKX, CLS, T2F, KKK, GLT, MMA, EAM, CLD

385CL, 385BL (51 Sections): T2E, EDA, SBE, KGB, ANS, BLY, FDL10.25" (260.4 mm) PITCH - 30 mm BOLT




Track Links

RH Regular 174-0217 47 51

LH Regular 174-0218 47 51

Other Components

Pin 174-0219 46 50

Master Pin 253-2742 1 1

Bushing 245-3805 46 50


Seal Assembly 248-1537 92 100

Seal Assembly - Master 244-8697 2 2



Stopper 7G-4332 1 1

Plug 6Y-0473 1 1

Track Hardware 1

Bolt 174-0221 188 204

Nut 174-0222 188 204


727


385C, 385CL,385C FS, 385B, 385BL, 5090B TRACK GREASE LUBRICATED/POSITIVE PINRETENTION (PPR2)

385C, 385C FS, 385B, 5090B (47 Section): KBC, MNZ, JCM, BKF, BKX, CLS, T2F, KKK, GLT, MMA, EAM, CLD385CL, 385BL (51 Sections): T2E, EDA, SBE, KGB, ANS, BLY, FDL

10.25" (260.4 mm) PITCH -- 30 mm BOLT




Track Links

RH Regular 296-4359 47 51

LH Regular 296-4360 47 51

Other Components

Pin 294-3063 46 50

Master Pin 294-3064 1 1

Bushing 245-3805 46 50


Seal 248-1537 92 100

Seal Assembly 244-8697 2 2



Track Hardware 1

Bolt 301-2301 188 204

Nut 174-0222 188 204

1 Not part of Link Assembly; required to assemble track group.

728


385B, 385BL, 5090B TRACK385B, 5090B (47 Section): BKF, BKX, CLS, CLD

385BL (51 Sections): ANS, BLY, FDL10.25" (260.4 mm) PITCH - 30 mm BOLT




Track Links

RH Regular 174-0217 47 51

LH Regular 174-0218 47 51

Other Components

Pin 174-0219 46 50

Master Pin 174-0220 1 1

Bushing 8E-1886 46 50


Washer 1S-4446 188 204

Spacer 1S-4445 2 2

Track Hardware 1

Bolt 174-0221 188 204

Nut 174-0222 188 204


385C, 385CL, 385C FS, 385B, 385BL, 5090B TRACK SHOES10.25" (260.4 mm) PITCH - 30 mm BOLT


Single Grouser 25.6" (650 mm) 174-0227


Double Grouser (Trapezoidal Opening) Heavy Duty 25.6" (650 mm) 301-2283

Double Grouser (Trapezoidal Opening, Clipped Grouser) 25.6" (650 mm) 174-0224

Double Grouser (Trapezoidal Opening, Clipped Grouser) Heavy Duty 25.6" (650 mm) 301-2281





385C, 385CL, 385C FS, 385B, 385BL, 5090B SPROCKETS



Bolt 28 145-2970

Spacer 28 199-4501

729


385C, 385CL, 385C FS, 385B, 385BL, 5090B IDLERS



Components of Group


Bearing 1 2 6Y-7599

Plug 1 1 7H-3171

Shaft 1 202-4902



Toric Ring 1 2 171-5714

Pin 2 194-1155

Dowel 2 194-1162

Plug 1 102-0883



385C, 385CL, 385C FS, 385B, 385BL, 5090B IDLERSCAST DESIGN



Components of Group


Bearing 1 2 6Y-7599

Shaft 1 293-8218


Pin 2 194-1155




Plug 1 7H-3171


730


385C, 385CL, 385C FS, 385B, 385BL, 5090B CARRIER ROLLERS


Group 6 242-4066

Components of Group


Bearing 1 1 6Y-8171

Bearing 1 1 6Y-8172


Retainer 1 6Y-9339


Cover 1 6Y-8177

Bolt 5 8T-8441


Toric Ring 1 2 171-5713


Plug 1 7H-3171

Mounting Hardware 2

Bolt 6 7X-2584

1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 Not included in roller group; quantity shown is required to mount each roller.

385C, 385CL, 385C FS, 385B, 385BL, 5090B TRACK ROLLERS



Components of Group


Bearing 2 2 6Y-8127

Shaft 1 178-7292



Toric Ring 2 2 176-5334


Plug 1 9W-2146

Dowel 2 178-7540

Mounting Hardware 3

Bolt 4 107-3953

Washer 4 9X-8258

1 The 385C, 385B, 385C FS, 5090B uses 16 track rollers, the 385CL, 385BL uses 18 track rollers.2 Component of preceding assembly or group; quantity shown per assembly or group.3 Not included in roller group; quantity shown is required to mount each roller group.

731


385C, 385CL, 385C FS, 385B, 385BL, 5090B END GUIDING GUARDS


Guard Assembly 1 4 189-3987 2

Bolt (30M) 16 8C-8723

Spacer 16 148-3111

1 For 385B Front Mounting Position Number 2 Roller, Rear Mounting Position Number 7 Roller. For 385B L Front Mounting PositionNumber 2 Roller, Rear Mounting Position Number 8 Roller. The 385 PPR2 pins are 10mm shorter on each end, so either the existing trackguides must be modified to move the guiding surface inboard 10mm, or all new track guides must be installed. Please refer to REHS2586for modification instructions.2 PPR2 UC 297-7519

385B, 385BL FULL LENGTH ROLLER GUARDS




Pipe 16 176-2146

Bolt (30M) 16 176-7524

Washer 32 9X-8258


Bolt (30M) 32 8C-8723

Spacer 32 148-3111

1 The 385 PPR2 pins are 10mm shorter on each end, so either the existing track guides must be modified to move the guiding surfaceinboard 10mm, or all new track guides must be installed. Please refer to REHS2586 for modification instructions.2 PPR2 Full Length Guards Std UC 297-7521, PPR2 Full Length Guards Long UC 297-75243 PPR2 Full Length Guards Std UC 297-7522, PPR2 Full Length Guards Long UC 297-7525

385C, 385CL, 385C FS, 385B, 385BL, 5090B CENTER GUIDING GUARDS



Bolt (30M) 8 8C-8723

Spacer 8 148-3111

1 The 385 PPR2 pins are 10mm shorter on each end, so either the existing track guides must be modified to move the guiding surfaceinboard 10mm, or all new track guides must be installed. Please refer to REHS2586 for modification instructions.2 PPR2 UC 297-7517

732

Excavators/Front Shovels5110B

5110B TRACKGREASED

AAA10.25" (260.4 mm) PITCH -1 1/8" BOLT




Track Links





Other Components

Pin 54 125-9383


Bushing 55 143-0746




Retaining Ring (Master) 2 7G-3431

Track Hardware 2

Bolt 220 5P-3868

Nut 220 5P-8221

1 Service replaced by 352-9711.2 Not part of link assembly; required to assemble track group.

5110B TRACK SHOES10.25" (260.4 mm) PITCH 1 1/8" BOLT


Double Grouser 1 27.6" (700 mm) 168-8409



1 Keyed Shoe, Clipped Grousers and Center Punched Hole.

5110B SPROCKETS



Bolt (M30 x 3.5) 28 9X-6618

Washer 28 9X-8399

Bolt (M12 x 2) 3 8T-6429

733


5110B IDLERS


Idler Group 2 --

Components of Group


Bearing 1 2 121-7371

Plug 1 1 2P-0347

Seal - Plug O-Ring 1 1 1S-8947

Shaft 1 123-1227

Bearing Block 2 167-1128 2

Pin 2 121-7373




Bracket -- Tie 1 170-0820

Bolt (M30) 4 3E-8032 3

Washer 4 6I-7081

1 Component of preceding assembly or group; quantity shown is quantity per assembly.2 Serviced Replaced by: 123-1218.3 Serviced Replaced By: 163-8682.

5110B CARRIER ROLLERS


Group 6 159-8346

Components of Group


Bearing Sleeve 1 1 126-4975

Bearing 1 1 126-4976

Shaft Assembly (w/collar) 1 126-4968

Retainer 1 126-4971

Bolt 2 6V-5844

Cover Assembly 1 126-4970

Gasket 1 126-4977

Bolt 3 6V-5686


Toric Ring 1 2 176-5333

Plug 1 9W-2146

Mounting Hardware 2 -

Bolt (M24) 1 6V-8132

Washer 1 8T-4167

1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 Not included in roller group, quantities shown are required to mount each roller.

734


5110B TRACK ROLLERS



Components of Group


Bearing 1 2 125-7878

Shaft 1 230-7154


Washer 2 125-7879

Dowel 2 228-8376



Seal -- Shaft O-Ring 2 1S-7408

Plug 2 9W-2146

Mounting Hardware 2

Bolt (M30) 4 8T-6624

Washer 4 9X-8399

1 Component of preceding assembly or group; quantity shown per assembly or group.2 Not included in roller group; quantity shown is required to mount each roller group.

5110B END GUIDING GUARDS



Bolt (30M) 16 7Y-5232

Washer 16 9X-8399

5110B FULL LENGTH GUARDS




Bolt (M30) 32 7Y-5232

Washer 32 9X-8399

Pipe 16 127-0181

Bolt (M30) 16 113-1047

Washer 16 9X-8399


735





Bolt (30M) 8 7Y-5232

Washer 8 9X-8399

736

Excavators/Front Shovels5130B, 5130

5130B, 5130 TRACK4CS, 5ZL, 7TJ

12.50" (317.5 mm) PITCH -- 1-3/8" BOLT




Track Links





Other Components

Pin 47 121-5394


Bushing 48 207-6061




Retaining Ring (Master) 2 124-8468

Track Hardware 3

Bolt (Use with 162-5610, 11,12, shoes) 192 6T-8853

Bolt (Use with 153-7806, 07, 08, shoes & earlier design) 192 6I-8648

Nut 192 3T-6292

1 Positive pin Retention Track; Sealed & Greased.2 Service replaced by 352-9711.3 Not part of link assembly; required to assemble track group.

5130B, 5130 TRACK SHOES12.50" (317.5 mm) PITCH -- 1-3/8" BOLT





5130B, 5130 SPROCKETS


Sprocket Rim (13 Teeth) 1 6I-7230

Bolt 30 3E-8032 1

Bolt 3 7X-2557

Washer 30 6I-7081

1 Serviced Replaced By: 163-8682.

737


5130B, 5130 IDLERS


Idler Group 2 --

Components of Group


Bearing 1 2 6I-7083

Plug 1 2P-0347

Shaft 1 6I-7076


Bracket-Tie 1 6I-7079

Pin 2 6I-7084

Bolt 4 3E-8032 2

Washer 4 6I-7081



Seal -- Shaft O-Ring 2 8T-6444


1 Component of preceding assembly or group; quantity shown per assembly or group.2 Serviced Replaced By: 163-8682.

5130B, 5130 CARRIER ROLLERS


Group 4 159-8347

Components of Group


Bushing 1 126-4976

Bushing 1 126-4975


Retainer 2 126-4971

Bolt 2 6V-5844

Cover Assembly 1 126-4970

Gasket 1 126-4977

Bolt 3 6V-5686


Toric Ring 1 2 176-5333

Plug 1 9W-2146


738


5130B, 5130 TRACK ROLLERS


NUMBER PART NUMBER


Components of Group

Roller Shell Assembly (SF) 1 113-5894 155-4103

Bushing 2 2 113-5896 155-4105

Shaft 1 113-5891 178-3927

End Collar 2 178-3929 178-3929

Washer 2 -- 155-4106

Pin 2 113-5890 113-5890

Seal -- Duo-Cone Group 2 6T-8435 171-5897

Toric Ring 2 2 1M-9011 163-7376


Plug 2 9W-2146 9W-2146

Mounting Hardware 3

Bolt 4 3E-8032 163-8682

Washer 4 6I-7081 6I-7081

1 Upgrade to 155-41022 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 Not included in roller group: Quantity shown is required to mount each roller.

5130B, 5130 TRACK GUIDING GUARDS



Bolt 48 8T-0672

Washer 48 6V-8237

739


5230 TRACK 1

7LL14.90" (378.5 mm) PITCH

QUANTITYFORMER PART

NUMBER PART NUMBER

Track Link/Shoe (47 sections)

43" (1100mm) Rock/General Purpose 1 -- 185-9380

Bushing (per shoe) 2 2 -- 168-7576


51" (1300mm) Rock/General Purpose 1 -- 185-9381



59" (1550mm) Soft Underfoot 1 -- 185-9382



Other Components

Pin 94 110-3118 110-3118

Plate 94 110-3119 175-1229

Retaining Ring 94 107-1036 9T-2584

Track Groups

Track Group (5 sections) - 43" (1100mm) 3 9 -- 150-0392



1 5230 Track is a special shovel style track consisting of single piece cast track joints (shoe, links, and track guides) and solid, positivelyretained track pins (refer to IRM's UC95-10, UC97-8, UC98-21, and UC01-03 for details).2 Component of preceding assembly or group. Bushings can be ordered individually to repair a worn shoe or to retrofit into an old styleshoe.3 An additional 2 Shoes, 4 Pins, 4 Plates and 4 Retaining Rings must be ordered for a complete (47 section) track.

5230 SPROCKETS



Bolt 46 100-3205

Washer 46 6I-7081

Seal -- O-Ring 1 7X-4778

740


5230 IDLERS


Idler Group 2 --

Components of Group

Idler Assembly 1 6I-7553

Bearing 1 2 6I-7555

Shaft 1 6I-7550


Bolt 4 3E-8032 2

Washer 4 6I-7081

Pin 2 6I-7554



Seal -- Shaft O-Ring 2 4N-1230


Plug 1 2P-0347

1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 Serviced Replaced By: 163-8682.

5230 CARRIER ROLLERS


Group 6 6I-7547

Components of Group

Roller Shell Assembly (SF) 1 113-5902

Bushing 1 2 113-5903

Shaft 1 113-5900


Pin 2 125-7877




Plug 2 9W-2146

1 Component of preceding assembly or group.

741


5230 TRACK ROLLERS


NUMBER PART NUMBER


Components of Group

Roller Shell Assembly (SF) 1 142-4413 2 155-4109

Bushing 3 2 142-4414 155-4111

Shaft 1 142-4412 178-2545

End Collar 2 173-9775 178-2543

Washer 2 -- 155-4112

Pin 1 113-5905 113-5905

Ring 2 113-5912 113-5912

Seal -- Duo-Cone Group 2 6T-8437 171-5898

Toric Ring 3 2 4M-0660 171-5899

Seal -- Shaft 2 2H-6124 2H-6124

Plug 2 9W-2146 9W-2146

1 Upgrade to 155-4107.2 Former roller shell 113-5908 is cancelled and replaced by one 142-4413 roller assembly and one 142-4412 shaft.3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

742


205B TRACK5ZF

6.75" (171.5 mm) PITCH -- 5/8" BOLT

QUANTITYSEALED

PART NUMBER



Track Links

RH Master 1 9K-0029

LH Master 1 9K-0028



Other Components

Pin 44 9K-4060


Bushing 44 9K-4061


Seal (Spring Washer) 180 7K-2018

Spacer 2 9K-4059

Track Hardware 2

Bolt 180 7H-3597

Nut 180 1M-1408

Special Group


1 Serviced replaced by 47-section Classic Greased Link Assembly 290-3450 and remove 2 sections.2 Not part of link assembly; required to assemble track group.

743


205B CLASSIC GREASED TRACK5ZF

QUANTITYSEALED

PART NUMBER



Track Links



Other Components

Pin 44 290-3453


Bushing 44 290-3454


Seal 180 290-3455

Spacer 2 290-3458

Track Hardware 2

Bolt 180 175-8552

Nut 180 200-9150

Special Group


1 Remove 2 sections.2 Not part of link assembly; required to assemble track group.

744


205 TRACK3HC, 4DC

6.75" (171.5 mm) PITCH -- 16 mm BOLT

QUANTITYUNSEALED

PART NUMBER

Link Assembly -- 47 Section 2 8U-3456 1


Track Links

RH Regular 47 8U-2927

LH Regular 47 8U-2926

Other Components

Pin 46 5W-4149


Bushing 46 5W-4148

Master Bushing 1 5W-4150

Spacer 2 5W-4152

Track Hardware 2

Bolt 188 3Y-4297

Bolt 3 188 7H-3597

Nut 188 1M-1408

1 Link assembly no longer serviced.2 Not part of link assembly; required to assemble track group.3 Required for 35" (889 mm).

205 TRACK3HC, 4DC

6.75" (171.5 mm) PITCH -- 14 mm BOLT

QUANTITYUNSEALED

PART NUMBER

Link Assembly -- 47 Section 2 5W-7283 1


Track Links



Other Components

Pin 46 5W-4149


Bushing 46 5W-4148


Spacer 2 5W-4152

Track Hardware 2

Bolt 188 7H-3596

Nut 188 7H-3606

1 Link assembly no longer serviced.2 Not part of link assembly; required to assemble track group.

745


205 TRACK SHOES5ZF

6.75" (171.5 mm) PITCH -- 5/8" BOLT


Triple Grouser 23.6" (600 mm) 8E-3332

Classic Triple Grouser 23.6" (600 mm) 175-8184



205 TRACK SHOES3HC, 4DC

6.75" (171.5 mm) PITCH -- 16 mm BOLT


Triple Grouser 35.4" (900 mm) 5W-9834

205 TRACK SHOES3HC, 4DC

6.75" (171.5 mm) PITCH -- 14 mm BOLT



205B, 205 CLASSIC SPROCKETS5ZF, 3HC, 4DC



Bolt 16 8T-0281

746


205 IDLERS5ZF


Components of Group


Bearing 1 2 8E-0645

Shaft 1 9W-2143

Bearing Block 2 9C-2498




Plug 1 7H-3171

Pin 2 9W-2145

Ring 1 1H-8397


205 IDLERS3HC, 4DC


Components of Group


Bearing 1 2 5W-4142

Shaft 1 5W-4159

Bearing Block 2 5W-4158

Seal -- Shaft O-Ring 2 4J-0526

Plug 1 9W-2146

Pin 2 5W-4040


747


205 CARRIER ROLLERS5ZF


Group 4 6K-9880

Components of Group


Shaft 1 6K-9861

Cup 2 1M-8736

Cone 2 1M-8735

Ring 1 1M-7914

Cover 1 3K-6638


Bolt 3 0L-1351




Seal -- Shaft 1 1H-9696


Plug 1 2P-0347





205 CARRIER ROLLERS3HC, 4DC


Group 4 8E-7494 1

1 This is Track Roller Gp; refer to 205 track roller section for serviceable components.

205 CLASSIC CARRIER ROLLERS3HC, 4DC


Group 4 175-8185

748


205 TRACK ROLLERS3HC, 4DC, 5ZF


Single Flange (SF) 14 8E-7494

Components of Group


Bearing 1 2 8E-0645

Shaft 1 9W-2143

End Collar 2 9W-2144

Pin 2 9W-2145




Plug 1 9W-2146

Mounting Hardware 2

Bolt 4 0L-1169

Washer 4 2S-5658




1 Component of preceding assembly or group; quantity shown is per assembly or group.2 These components are not included in the roller group; quantities shown are required to mount each roller.

205 CLASSIC TRACK ROLLERS3HC, 4DC, 5ZF



Mounting Hardware 1

Bolt 4 0L-1169

Washer 4 2S-5658


205 TRACK GUIDING GUARDS5ZF



Bolt 16 6V-4429

Washer 16 3B-4510

749


205 TRACK GUIDING GUARDS3HC, 4DC



Bolt 16 6V-4429

Washer 16 3B-4510

750


211B TRACK6XG

6.75" (171.5 mm) PITCH -- 5/8" BOLT

QUANTITYSEALED

PART NUMBER



Track Links

RH Master 1 9K-0029

LH Master 1 9K-0028



Other Components

Pin 50 9K-4060


Bushing 50 9K-4061



Spacer 2 9K-4059

Track Hardware 2

Bolt 204 7H-3597

Nut 204 1M-1408

Special Group


1 Service replaced by Classic link assembly 290-34492 Not part of link assembly; required to assemble track group.

751


211B CLASSIC TRACK6XG

6.75" (171.5 mm) PITCH -- 5/8" BOLT

QUANTITYSEALED

PART NUMBER



Track Links



Other Components

Pin 50 290-3453


Bushing 50 290-3454


Seal 100 290-3455

Spacer 2 290-3458

Track Hardware 1

Bolt 204 175-8552

Nut 204 200-9150


211 TRACK4EC, 5CC

6.75" (171.5 mm) PITCH -- 16 mm BOLT

QUANTITYUNSEALED

PART NUMBER



Track Links



Other Components

Pin 50 5W-4149


Bushing 50 5W-4148


Spacer 2 5W-4152

Track Hardware 2

Bolt 204 3Y-4297

Bolt 3 204 7H-3597

Nut 204 1M-1408

1 Link assembly provided on Made As Ordered (MAO) basis only; individual components are directly serviced.2 Not part of link assembly; required to assemble track group.3 Required for 35" (889 mm) and 39" (990 mm).

752


211 TRACK4EC, 5CC

6.75" (171.5 mm) PITCH -- 14 mm BOLT

QUANTITYUNSEALED

PART NUMBER



Track Links



Other Components

Pin 50 5W-4149


Bushing 50 5W-4148


Spacer 2 5W-4152

Track Hardware 2

Bolt 204 7H-3596

Nut 204 7H-3606

1 Link Assembly no longer serviced.2 Not part of link assembly; required to assemble track group.

211B TRACK SHOES6.75" (171.5 mm) PITCH -- 5/8" BOLT













753


211B, 211 CLASSIC SPROCKETS4EC, 5CC,6XG



Bolt 16 8T-0281

211B, 211 IDLERS6XG


Components of Group


Bearing 1 2 8E-0645

Shaft 1 9W-2143





Plug 1 7H-3171

Pin 2 9W-2145

Ring 1 1H-8397





211 IDLERS4EC, 5CC


Components of Group


Bearing 1 2 5W-4142

Shaft 1 5W-4159



Plug 1 9W-2146

Pin 2 5W-4040


754


211B CARRIER ROLLERS6XG


Group 4 6K-9880

Components of Group


Shaft 1 6K-9861

Cup 2 1M-8736

Cone 2 1M-8735

Ring 1 1M-7914

Cover 1 3K-6638


Bolt 3 0L-1351






Plug 1 2P-0347




1 Component of preceding asssembly or group.

211 CARRIER ROLLERS4EC, 5CC


Group 4 8E-7494 1

1 This is Track Roller Gp; refer to 211 track roller section for serviceable components.

211 CLASSIC CARRIER ROLLERS4EC, 5CC


Group 4 175-8185

755


211B, 211 TRACK ROLLERS



Components of Group


Bearing 1 2 8E-0645

Shaft 1 9W-2143


Pin 2 9W-2145




Plug 1 9W-2146

Mounting Hardware 2

Bolt 4 0L-1169

Washer 4 2S-5658




1 Component of preceding assembly or group; quantity shown is per assembly or group.2 These components are not included in the roller group; quantities shown are required to mount each roller.

211B, 211 CLASSIC TRACK ROLLERS



Mounting Hardware 1

Bolt 4 0L-1169

Washer 4 2S-5658


211B TRACK GUIDING GUARDS6XG



Bolt 16 6V-4429

Washer 16 3B-4510

756


211 TRACK GUIDING GUARDS4EC, 5CC



Bolt 16 6V-4429

Washer 16 3B-4510

757


213 TRACK1EJ

6.75" (171.5 mm) PITCH -- 5/8" BOLT

QUANTITYSEALED

PART NUMBER



Track Links

RH Master 1 9K-0029

LH Master 1 9K-0028



Other Components

Pin 50 9K-4060


Bushing 50 9K-4061



Spacer 2 9K-4059

Track Hardware 2

Bolt 204 7H-3597

Nut 204 1M-1408

Special Group


1 Serviced replaced by Classic Link Assembly 290-34492 Not part of link assembly; required to assemble track group.

758


213 CLASSIC GREASED TRACK1EJ

6.75" (171.5 mm) PITCH -- 5/8" BOLT

QUANTITYSEALED

PART NUMBER



Track Links



Other Components

Pin 50 290-3453


Bushing 50 290-3454


Seal 100 290-3455

Spacer 2 290-3458

Track Hardware 1

Bolt 204 175-8552

Nut 204 200-9150

Special Group



759


213 TRACK1EJ

6.75" (171.5 mm) PITCH -- 16 mm BOLT

QUANTITYUNSEALED

PART NUMBER



Track Links



Other Components

Pin 50 5W-4149


Bushing 50 5W-4148


Spacer 2 5W-4152

Track Hardware 2

Bolt 204 3Y-4297

Bolt 3 204 7H-3597

Nut 204 1M-1408

1 Link Assembly provided on Made As Ordered (MAO) basis only; Individual components are directly serviced.2 Not part of link assembly; required to assemble track group.3 Required for 35" (889 mm) and 39" (990 mm)

213 TRACK3ZC, 9XB

6.75" (171.5 mm) PITCH -- 14 mm BOLT

UNSEALEDPART NUMBER 42 SECTION 51 SECTION

Link Assembly (Quantity 2)1 1


Track Links



Other Components

Pin 5W-4149 41 50

Master Pin 5W-4151 1 1

Bushing 5W-4148 41 50

Master Bushing 5W-4150 1 1

Spacer 5W-4152 2 2

Track Hardware 2

Bolt 7H-3596 168 204

Nut 7H-3606 168 204

1 Link assembly no longer serviced.2 Not part of link assembly; required to assemble track group.

760


213 TRACK SHOES1EJ

6.75" (171.5 mm) PITCH -- 5/8" BOLT







213 TRACK SHOES1EJ

6.75" (171.5 mm) PITCH -- 16 mm BOLT



213 TRACK SHOES3ZC, 9XB

6.75" (171.5 mm) PITCH -- 14 mm BOLT



213 CLASSIC SPROCKETS1EJ



761


213 IDLERS1EJ (LATER MODELS)


Components of Group


Bearing 1 2 8E-0645

Shaft 1 9W-2143





Plug 1 7H-3171

Pin 2 9W-2145

Ring 1 1H-8397





213 IDLERS1EJ (EARLY MODELS), 3ZC, 9XB


Components of Group


Bearing 1 2 5W-4142

Shaft 1 5W-4159



Plug 1 9W-2146

Pin 2 5W-4040


762


213 CARRIER ROLLERS1EJ


Group 4 6K-9880

Components of Group


Shaft 1 6K-9861

Cup 2 1M-8736

Cone 2 1M-8735

Ring 1 1M-7914

Cover 1 3K-6638


Bolt 3 0L-1351






Plug 1 2P-0347




1 Component of preceding assembly or group

213 CARRIER ROLLERS1EJ (EARLY MODELS), 3ZC, 9XB


Group 4 8E-7494 1

1 Track Roller; refer to 213 track roller section for serviceable components.

213 CLASSIC CARRIER ROLLERS1EJ (EARLY MODELS), 3ZC, 9XB


Group 4 175-8185

763


213 TRACK ROLLERS



Components of Group


Bearing 1 2 8E-0645

Shaft 1 9W-2143


Pin 2 9W-2145




Plug 1 9W-2146

Mounting Hardware 2

Bolt 4 0L-1169

Washer 4 2S-5658




1 Component of preceding assembly or group; quantity shown is per assembly or group.2 These components are not included in the roller group; quantities shown are required to mount each roller.3 Component of preceding assembly or group; quanitity shown is per assembly or group.

213 CLASSIC TRACK ROLLERS



Mounting Hardware 1

Bolt 4 0L-1169

Washer 4 2S-5658


213 TRACK GUIDING GUARDS1EJ



Bolt 16 6V-4429

Washer 16 3B-4510

764


213 TRACK GUIDING GUARDS1EJ (EARLY MODELS), 3ZC, 9XB



Bolt 16 6V-4429

Washer 16 3B-4510

765


215 TRACKLONG PIN

(44 SECTION & 51 SECTION): 14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB6.75" (171.5 mm) PITCH -- 5/8" BOLT

SEALEDPART

NUMBER 44 SECTION 51 SECTION

Link Assembly -- (Quantity 2) - 1 6T-0511 2


Track Links

RH Master 9K-0029 1 1

LH Master 9K-0028 1 1



Other Components

Pin 9K-4060 43 50

Master Pin 9K-4062 1 1

Bushing 9K-4061 43 50

Master Bushing 7K-2020 1 1


Spacer 9K-4059 2 2

Track Hardware 3

Bolt 7H-3597 176 204

Nut 1M-1408 176 204

Special Group

Pin and Bushing Group (38 Sections) 1V-8623 1 1

1 For Sealed & Lubricated Track, order 40 Section (154-3657) Link Assembly and add appropriate number of sections, also requiresordering a master shoe. OR Classic offering, order 47 section Classic Link Assembly 290-3449 and remove 3 sections.2 6T-0511 serviced replaced with Classic Link Assembly 290-3449.3 Not part of link assembly; required to assemble track group.

766


215 CLASSIC GREASED TRACKLONG PIN

(44 SECTION & 51 SECTION): 14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB6.75" (171.5 mm) PITCH -- 5/8" BOLT

SEALEDPART


Link Assembly -- 51 Section1

-- 2 290-3449 2


Track Links

RH Regular 289-9337 43 51

LH Regular 289-9338 43 51

Other Components

Pin 290-3453 43 50

Master Pin 290-3456 1 1

Bushing 290-3454 43 50


Seal 290-3455 88 100

Spacer 290-3458 2 2

Track Hardware 3

Bolt 175-8552 176 204

Nut 200-9150 176 204

Special Group


1 Order 47 section Classic Link Assembly 290-3449 and remove 3 sections.2 For Sealed & Lubricated Track, order 40 Section (154-3657) Link Assembly and add appropriate number of sections, also requiresordering a master shoe.3 Not part of link assembly; required to assemble track group.

767


215 TRACKSHORT PIN

(44 & 51 SECTION): 14Z432-7606.75" (171.5 mm) PITCH -- 5/8" BOLT

SEALEDPART


Link Assembly (Quantity 2) - 5C-0949 1


Track Links





Other Components

Pin 3A-4133 43 50

Master Pin 3A-4132 1 1

Bushing 3A-4131 43 50

Master Bushing 5C-4088 1 1


Spacer 9K-4059 2 2

Track Hardware 2

Bolt 7H-3597 176 204

Nut 1M-1408 176 204

1 Serviced replaced by Classic Link Assembly 290-3452.2 Not part of link assembly; required to assemble track group.

768


215 CLASSIC GREASED TRACKSHORT PIN

(44 & 51 SECTIONS): 14Z432-7606.75" (171.5 mm) PITCH -- 5/8" BOLT

SEALEDPART

NUMBER 44 SECTION 1 51 SECTION

Link Assembly -- 51 Section -- 2 290-3452 2


Track Links

RH Regular 289-9337 43 51

LH Regular 289-9338 43 51

Other Components

Pin 290-3459 43 50

Master Pin 290-3461 1 1

Bushing 290-3460 43 50


Seal 290-3455 88 100

Spacer 290-3458 2 2

Track Hardware 3

Bolt 175-8552 176 204

Nut 200-9150 176 204

1 Order 51 section 290-3452 and remove 7 sections.2 Serviced replaced by Classic Link Assembly 290-3452.3 Not part of link assembly; required to assemble track group.

215 TRACK(44 & 51 SECTION): 14Z1-431, 57Y1-2030, 96L

6.75" (171.5 mm) PITCH -- 9/16" BOLT

SEALEDPART


Link Assembly (Quantity 2) 6A-4713 5C-4089


Track Links



Other Components

Pin 5C-4095 43 50

Master Pin 5C-4092 1 1

Bushing 5C-4094 43 50

Master Bushing 5C-4088 1 1


Spacer 7K-2016 2 2

Track Hardware 1

Bolt 4K-7038 176 204

Nut 7K-2017 176 204


769


215 TRACK SHOESFOR USE WITH 6T0511 LINK ASSEMBLY AND CLASSIC 290-3449 LINK ASSEMBLY

6.75" (171.5 mm) PITCH -- 5/8" BOLT

TYPE WIDTHCLASSIC PART

NUMBER PART NUMBER

Moderate Service 24.0" (610 mm) 1V-7069


Triple Grouser 23.6" (600 mm) 175-8184 8E-3332



215 TRACK SHOESFOR USE WITH CLASSIC 290-3452 LINK ASSEMBLY

6.75" (171.5 mm) PITCH -- 5/8" BOLT


Triple Grouser 19.7" (500 mm) 3T-3648





Triple Grouser 19.7" (500 mm) 3A-4129

Triple Grouser 24.0" (610 mm) 5C-0768

Triple Grouser 27.8" (705 mm) 6A-7527

215 CLASSIC SPROCKETS14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB


Sprocket Assembly (23 Teeth) 1 322-6302

Rim (23 Teeth) 1 3T-9153 1

1 Optional Classic service replacement 322-6303

215 CLASSIC SPROCKETS14Z1-760, 57Y1-2030, 96L



Rim (23 Teeth) 1 3T-9154

770


215 IDLERS14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB


Idler Group 2 8V-9106

Components of Group


Bushing Assembly 1 2 1V-9611

Bearing 1 1 7K-1089

Shaft 1 8V-4714

Bearing Block 2 8V-4713




Seal -- Shift O-Ring 2 7F-8267

Bolt 12 9B-7237

Washer 12 8T-4896

Plug 1 6Y-0473

Stopper 1 7G-4332

Lock 2 5M-5000

Bolt 2 7X-0318

Washer 2 7X-0563





771


215 IDLERS14Z1-760, 57Y1-2030, 96L


Components of Group

Idler Assembly 1 5C-6602

Bushing Assembly 1 2 3A-4790

Shaft 1 6A-4725

Washer Thrust 2 5C-4314



Toric Ring 1 2 216-2956


Plug 1 9F-2247

Lock 2 5M-5000

Bolt 2 7X-0318

Washer 2 7X-0563





772


215 CARRIER ROLLERS14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB


Group 4 6K-9880

Components of Group


Shaft 1 6K-9861

Cup 2 1M-8736

Cone 2 1M-8735

Ring 1 1M-7914

Cover 1 3K-6638


Bolt 3 0L-1351

Plate 1 6K-9860

Bolt 2 6V-4791






Plug 1 2P-0347





773


215 CARRIER ROLLERS14Z1-760, 57Y1-2030, 96L


Group 4 3T-4618

Components of Group

Roller Shell 1 3T-4617

Shaft 1 6K-9861

Cup 2 1M-8736

Cone 2 1M-8735

Ring 1 1M-7914

Cover 1 4H-9527


Bolt 5 0S-0509

Plate 1 6K-9860

Bolt 2 6V-4791









774


215 TRACK ROLLERS4HG, 9TF, 9YB1037-UP


Single Flange (SF) 20 8E-7494 1

Components of Group


Bearing 2 2 8E-0645

Shaft 1 9W-2143


Pin 2 9W-2145




Plug 1 9W-2146

Mounting Hardware 3

Bolt 4 0L-1169

Washer 4 2S-5658




1 Excavator style roller; roller can be retrofited to earlier models using 118-1608 rollers; some guiding guard modification will be required.


215 CLASSIC TRACK ROLLERS4HG, 9TF, 9YB1037-UP



Mounting Hardware 1

Bolt 4 0L-1169

Washer 4 2S-5658


775


215 TRACK ROLLERS14Z761-UP, 2XC, 57Y2031-UP, 9TF, 9YB1-1036



Components of Group



Bearing 1 1 7K-1089

Shaft 1 118-1610 2

End Collar 2 118-1616 3

Ring 2 6H-7382

Bolt 12 2P-3201





Plug 1 6Y-0473

Stopper 1 7G-4332

Mounting Hardware 4

Bolt 4 1A-1135

Washer 4 5P-8247




1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 Replaces former 3K-6616 shaft; requires 2-118-1616 end collars3 If 3K-6616 shaft is used, use 2--5K-7187 end collars.4 These components are not included in the roller group; quantities shown are required to mount each roller.

776


215 TRACK ROLLERS14Z1-760, 57Y1-2030, 96L



Components of Group



Bearing 2 1 6Y-4744

Shaft 1 6S-3171


Ring 2 6S-3172



Toric Ring 2 2 216-2956


Plug 1 9F-2247

Mounting Hardware 3

Bolt 4 0S-1585

Washer 4 2M-0849




1 20 required for long roller frame arrangement.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 These components are not included in the roller group; quantities shown are required to mount each roller.

215 CLASSIC TRACK ROLLERS14Z1-760, 57Y1-2030, 96L



Mounting Hardware 2

Bolt 4 0S-1585

Washer 4 2M-0849

1 20 required for long roller frame arrangement.2 These components are not included in the roller group; quantities shown are required to mount each roller.

777


215 TRACK GUIDING GUARDS (SEGMENTED)14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB



Bolt 8 8T-6871

Washer 8 8T-4122

Spacer 8 9M-7783

215 TRACK GUIDING GUARDS (SEGMENTED)14Z1-760, 57Y1-2030, 96L


Guard Assembly 2 5C-8823

Bolt 8 8T-6871

Washer 8 8T-4122

Spacer 8 9M-7783

215 TRACK ROLLER GUARDSFULL LENGTH ONE PIECE

14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB



Bolt 28 7X-0366

Bolt 14 031-9099

Washer 56 8T-4994

Nut 14 6V-8182

Spacer 14 3V-9002

778


215 TRACK ROLLER GUARDSFULL LENGTH TWO PIECE

14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB




Bolt 36 0S-1625

Bolt 18 4B-7572

Washer 36 5P-8247

Washer 36 5P-8249

Nut 18 1A-5666

Spacer 36 9M-7783

Tube 18 8V-3502

779

Excavators/Front Shovels215SA, 219, 225

215SA, 219, 225 TRACK2SJ, 2ZD550-UP, 3YD, 4FC736-UP, 5CF, 5XG, 6RG

7.50" (190.5 mm) PITCH -- 3/4" BOLT

SEALEDPART


Link Assembly (Quantity 2) - - 1


Track Links

RH Regular 7T-4043 2 49 49

LH Regular 7T-4044 3 49 49

Other Components

Pin 6Y-8186 48 48

Master Pin 6Y-8185 1 1

Bushing 5S-0710 48 48



Spacer 5S-0754 2 2

Track Hardware 4

Bolt 1S-1859 172 172

Nut 1S-1860 172 172

1 Service replaced by Classic link assembly 289-49482 Service Replaced by 289-4951.3 Service Replaced by 289-4952.4 Not part of link assembly; required to assemble track group.

780


215SA, 219, 225 CLASSIC GREASED TRACK2SJ, 2ZD550-UP, 3YD, 4FC736-UP, 5CF, 5XG, 6RG

7.50" (190.5 mm) PITCH -- 3/4" BOLT

SEALEDPART


Link Assembly -- (Quantity 2) -- 1 289-4948 1


Track Links

RH Regular 289-4951 43 49

LH Regular 289-4952 43 49

Other Components

Pin 175-8923 42 48

Master Pin 289-4954 1 1

Bushing 289-4955 42 48


Seal Grease 289-0646 86 98

Spacer 289-4957 2 2 2

Track Hardware 3

Bolt 188-5633 172 196

Nut 188-5856 172 196

1 Order 289-4948 (49 section link assembly) and remove 6 sections.2 Service replaced by 158-4381.3 Not part of link assembly; required to assemble track group.

781


215SA, 225 TRACK2ZD1-549, 4JC, 51U2832-UP, 76U1649-UP, 4FC1-735

6.91" (175.5 mm) PITCH -- 5/8" BOLT

SEALEDPART


Link Assembly -- (Quantity 2) -- - 1


Track Links

RH Master 3P-7155 1 1

LH Master 3P-7156 1 1



Other Components

Pin 6B-5502 45 52


Bushing 5S-0710 45 52



Spacer 5S-0754 2 2

Track Hardware 2

Bolt 7H-3597 184 212

Nut 1M-1408 184 212

Special Group


1 Service replaced by Classic Link Assembly 289-4946.2 Not part of link assembly; required to assemble track group.

782


215SA, 225 CLASSIC GREASED TRACK2ZD1-549, 4JC, 51U2832-UP, 76U1649-UP, 4FC1-735

6.91" (175.5 mm) PITCH -- 5/8" BOLT

SEALEDPART


Link Assembly -- (Quantity 2) -- 1 289-4946 1


Track Links

RH Regular 289-4949 46 53

LH Regular 289-4950 46 53

Other Components

Pin 175-8923 45 52

Master Pin 289-4954 1 1

Bushing 289-4955 45 52


Seal Grease 289-0646 92 106

Spacer 289-4957 2 2 2

Track Hardware 3

Bolt 175-8552 184 212

Nut 200-9150 184 212

1 Order 289-4946 (53 section link assembly) and remove 7 sections.2 Service replaced by 158-4381.3 Not part of link assembly; required to assemble track group.

783


225 TRACK51U1-2831, 76U1-1648

6.75" (171.5 mm) PITCH -- 5/8" BOLT

SEALEDPART


Link Assembly -- 47 Section 8K-0323 1 8K-4699 2


Track Links





Other Components

Pin 9K-4060 46 53

Master Pin 9K-4062 1 1

Bushing 9K-4061 46 53

Master Bushing 7K-2020 1 1


Spacer 9K-4059 2 2

Track Hardware 3

Bolt 7H-3597 188 216

Nut 1M-1408 188 216

Special Group


1 Serviced replaced by Classic link assembly 290-3450.2 Serviced replaced by Classic link assembly 290-3451.3 Not part of link assembly; required to assemble track group.

784


225 CLASSIC GREASED TRACK51U1-2831, 76U1-1648

6.75" (171.5 mm) PITCH -- 5/8" BOLT

SEALEDPART




Track Links

RH Regular 289-9337 47 54

LH Regular 289-9338 47 54

Other Components

Pin 290-3453 46 53

Master Pin 290-3456 1 1

Bushing 290-3454 46 53


Seal Grease 290-3455 94 108

Spacer 290-3458 2 2

Track Hardware 2

Bolt 175-8552 188 216

Nut 200-9150 188 216

1 For Sealed & Lubricated Track, order 40 section (154-3657) Link Assembly and add appropriate number of sections.2 Not part of link assembly; required to assemble track group.

215SA, 219, 225 TRACK SHOES7.50" (190.5 mm) PITCH -- 3/4" BOLT


Moderate Service 28.0" (710 mm) 6Y-2040




Triple Grouser 34.0" (860 mm) 7Z-8877

215SA, 225 TRACK SHOES6.91" (175.5 mm) PITCH -- 5/8" BOLT

(PER MACHINE) WIDTH PART NUMBER

Triple Grouser (Center Punched Slots) 18.0" (460 mm) 8S-2981

Triple Grouser 21.7" (550 mm) 3V-9489

Triple Grouser (Center Punched Slots) 24.0" (610 mm) 1N-9701

Triple Grouser 30.0" (760 mm) 3V-9114

785


215SA, 225 TRACK SHOES6.75" (171.5 mm) PITCH -- 5/8" BOLT




215SA, 219, 225 SPROCKETS2SJ, 2ZD550-UP, 3YD, 4FC736-UP, 5CF, 5XG, 6RG

7.50" (190.5 mm) PITCH -- 3/4" BOLT


Classic Sprocket Assembly (21 Teeth) 1 289-9674

Rim (21 Teeth) 1 8E-9805 1

1 Classic optional service replacement 286-9821. See IRM UC96-24 for additional information.

215SA, 225 SPROCKETS2ZD1-549, 4FC418-735, 8YD, 8XD, 51U5853-UP, 76U5466-UP

6.91" (175.5 mm) PITCH -- 5/8" BOLT


Classic Sprocket Assembly (23 Teeth) 1 322-6376 1

Rim (23 Teeth) 1 3T-9152

1 For the following serial number machines 4JC, 4FC1-417, 51U2832-5852, 76U1649-5465, New sprocket mounting components will berequired to upgrade to this sprocket assembly, refer to IRM UC85-18.

215, 225 SPROCKETS51U1-2831, 76U1-1648

6.75" (171.5 mm) PITCH -- 5/8" BOLT


Sprocket Assembly (23 Teeth) 1 3V-1727

Rim (23 Teeth) 1 3T-9153 1

1 Optional Classic service replacement 322-6303

786


215SA, 219, 225 IDLERS2SJ, 2ZD, 3YD, 4FC, 4JC, 51U2832-UP, 5CF, 5XG, 6RG, 76U1649-UP, 8YD


Idler Group 2 4C-2084

Components of Group

Idler Assembly 1 3V-5131


Bearing 1 1 8P-6652

Shaft 1 5K-0305






Bolt 12 8T-2502

Washer 12 8T-4896

Plug 1 2P-0347

Pin 2 5M-5000

Bolt 2 7X-0311

Washer 2 7X-0563





787


215SA, 225 IDLERS51U1-2831, 76U1-1648


Components of Group



Bearing 1

Shaft 1 4K-9984



Toric Ring 1



Bolt 12 0S-1588

Washer 12 3B-4506

Plug 1 2P-0347

Pin 2 5M-5000

Bolt 2 0T-0319

Washer 2 4K-9943





788


215SA, 219, 225 CARRIER ROLLERS2SJ, 2ZD, 3YD, 4FC, 4JC, 51U2832-UP, 5CF, 5XG, 6RG, 76U1649-UP, 8YD


Group 4 5A-8374 1

Components of Group


Shaft 1 3T-3207

Cup 2 9S-3581

Cone 2 9S-3582

Ring 1 1M-7914

Cover 1 5M-2043

Collar 1 9S-3567

Plug 1 2P-0347

Bolt 3 0S-1594

Plate 1 8P-6188

Bolt 2 5K-9107









1 Optional Classic service replacement 200-9185.2 Component of preceding assembly or group.

789


215SA, 225 CARRIER ROLLERS51U1-2831, 76U1-1648


Group 4 6K-9880

Components of Group


Shaft 1 6K-9861

Cup 2 1M-8736

Cone 2 1M-8735

Ring 1 1M-7914

Cover 1 3K-6638

Collar 1 1M-7918

Plug 1 2P-0347

Bolt 3 0L-1351

Plate 1 6K-9860

Bolt 2 6V-4791










790


215SA, 219, 225 TRACK ROLLERS2SJ, 2ZD550-UP, 3YD, 5CF, 5XG, 6RG


Single Flange (SF) 16 1 8E-4573 2

Components of Group


Shaft 1 9W-3198


Pin 2 9W-2204




Plug 1 9W-2146

Mounting Hardware 4

Bolt 4 7F-5227

Washer 4 5P-8248





1 20 required for long roller frame machines.2 Excavator style roller.3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.4 These components are not included in the roller group; quantities shown are required to mount each roller.

791


215SA, 225 TRACK ROLLERS2ZD1-549, 4FC351-UP, 51U6255-UP, 76U5159-UP, 8YD


Single Flange (SF) 16 1 8E-5745 2

Components of Group


Shaft 1 9W-2202


Pin 2 9W-2204




Plug 1 9W-2146

Mounting Hardware 4

Bolt 4 0L-1169

Washer 4 5P-8247





1 20 required for long roller frame machines.2 Excavator style roller.3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.4 These components are not included in the roller group; quantities shown are required to mount each roller.

215SA, 225 CLASSIC TRACK ROLLERS4FC1-350, 4JC, 51U2832-6254, 76U1649-5158



Mounting Hardware 2

Bolt 4 8S-9092

Washer 4 5P-8247

1 20 required for long roller frame machines.2 These components are not included in the roller group; quantities shown are required to mount each roller.

792


215SA, 225 TRACK ROLLERS4FC1-350, 4JC, 51U2832-6254, 76U1649-5158



Components of Group



Bearing 4 1 8P-6652

Shaft 1 118-1613 3


Ring 2 6H-7382

Bolt 12 2P-3201





Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 6

Bolt 4 8S-9092

Washer 4 5P-8247






1 20 required for long roller frame machines.2 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. OR Classic optionalservice replacement 175-8024.3 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.5 If 5M-1915 shaft is used, use 1 - 5M-0627 and 1 - 1M-3812 end collar.6 These components are not included in the roller group; quantities shown are required to mount each roller.

793


215SA, 225 TRACK ROLLERS51U1-2831, 76U1-1648



Components of Group



Bearing 2 1 7K-1089

Shaft 1 118-1610 3

End Collar 2 118-1616 4

Ring 2 6H-7382

Bolt 12 2P-3201





Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 5

Bolt 4 1A-1135

Washer 4 5P-8247






1 20 required for long roller frame machines.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 Replaces former 3K-6616 shaft, requires 2 - 118-1616 end collars.4 If 3K-6616 shaft is used, use 2 - 5K-7187 end collars.5 These components are not included in the roller group; quantities shown are required to mount each roller.

215SA, 219, 225 TRACK GUIDING GUARDS (SEGMENTED)2SJ, 2ZD, 3YD, 4FC, 4JC, 51U2832-UP, 5CF, 5XG, 6RG, 76U1649-UP, 8YD



Bolt 8 1A-8063

Washer 8 8T-4994

Spacer 8 4F-6568

794


215SA, 225 TRACK GUIDING GUARDS (SEGMENTED)51U1-2831, 76U1-1648



Bolt 8 0S-1625

Bolt 16 0S-1595

Washer 8 4D-3704

Washer 8 7D-1649

Spacer 8 9M-7783

Bar 4 8K-4438

215SA, 219, 225 TRACK ROLLER GUARDSFULL LENGTH, SHORT UNDERCARRIAGE

2SJ, 2ZD, 3YD, 4FC, 4JC, 51U2832-UP, 5CF, 5XG, 6RG, 76U1649-UP, 8YD



Bolt 28 7X-0366

Bolt 14 031-9099

Washer 56 8T-4994

Nut 14 6V-8182

Spacer 14 3V-9002

215SA, 219, 225 TRACK ROLLER GUARDSFULL LENGTH, LONG UNDERCARRIAGE

2SJ, 2ZD, 3YD, 4FC, 4JC, 51U2832-UP, 5CF, 5XG, 6RG, 76U1649-UP, 8YD



Bolt 36 7X-0366

Bolt 18 031-9099

Washer 72 8T-4994

Nut 18 6V-8182

Spacer 18 3V-9002

795


215SA, 225 TRACK ROLLER GUARDSFULL LENGTH, SHORT UNDERCARRIAGE

51U1-2831, 76U1-1648




Bolt 36 1A-1135

Bolt 14 2P-9845

Washer 28 2S-0115

Washer 36 4D-3704

Nut 14 1B-4207

Spacer 14 3V-4764

215SA, 225 TRACK ROLLER GUARDSFULL LENGTH, LONG UNDERCARRIAGE

51U1-2831, 76U1-1648




Bolt 44 1A-1135

Bolt 18 2P-9845

Washer 36 2S-0115

Washer 44 4D-3704

Nut 18 1B-4207

Spacer 18 3V-4764

796

Excavators/Front Shovels225SA, FB227, 229, 231

225SA, FB227, 229, 231 TRACK 1

HYBRID LINKS10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U

8.00" (203.2 mm) PITCH -- 3/4" BOLT

QUANTITYSEALED

PART NUMBER



Track Links





Other Components

Pin 46 4M-5989


Bushing (72.75 mm OD) 46 237-7305



Spacer 2 8M-7290

Track Hardware 3

Bolt 188 1S-1859

Nut 188 1S-1860

1 The 231 Excavator (Serial No. "1NK") use a 54 section link assembly, order 238-9958. Also see note 2 regarding hybrid link assemblyand sprocket to use.2 Hybrid link assembly can only be used with a worn (current rim part number 9M-3818) sprocket, or new (new rim part number246-5228) sprocket. The following sprockets part numbers are for NON-CATERPILLAR machines (321-6319 with 23 teeth and 20 mountingbolt holes, 321-6320 with 23 teeth and 24 mounting bolts) see IRM UC08-13 Media No.PELJ0928 for models the sprockets can be used on.


797


225SA, FB227, 229, 231 TRACK 1

10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U8.00" (203.2 mm) PITCH -- 3/4" BOLT


PART NUMBER



Track Links

RH Master 1 6P-6129

LH Master 1 6P-6130



Other Components

Pin 46 4M-5989


Bushing (66.6 mm OD) 46 4M-5991



Spacer 2 8M-7290

Track Hardware 3

Bolt 188 1S-1859

Nut 188 1S-1860

1 The 231 Excavator (Serial No. "1NK") use a 54 section link assembly, order 238-9958. Also see note 2 regarding hybrid link assemblyand sprocket to use.2 Service replaced by 238-9956 hybrid link assembly. Hybrid link assembly can only be used with a worn (current rim part number9M-3818) sprocket, or new (new rim part number 246-5228) sprocket. Optional Service Replacement by 288-3705 Classic link assembly. Ifreplacing sprocket use 289-2207 Classic sprocket. The following sprockets part numbers are for NON-CATERPILLAR machines (321-6319with 23 teeth and 20 mounting bolt holes, 321-6320 with 23 teeth and 24 mounting bolts) see IRM UC08-13 Media No.PELJ0928 formodels the sprockets can be used on.3 Not part of link assembly: required to assemble track group.

798


225SA, FB227, 229, 231 CLASSIC GREASED TRACK10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U

8.00" (203.2 mm) PITCH -- 3/4" BOLT




Track Links



Other Components

Pin 46 175-8929


Bushing (66.6 mm OD) 46 289-0641


Seal Grease 92 289-0645

Spacer 2 289-0647

Track Hardware 2

Bolt 188 188-5633

Nut 188 188-5856

1 If installing new sprocket rim use 289-2207 Classic sprocket.2 Not part of link assembly: required to assemble track group.

FB227 TRI-LINK TRACK8.00" (203.2 mm) PITCH -- 3/4" BOLT



Components of Outrigger Chain (Serviced individually; quantities shown are per machine) 1

Track Links



Other Components

Stub Pin 94 106-8237

Stub Bushing 94 6Y-1348

Track Hardware (quantities shown are per machine) 2

Bolt (Center Chain) 188 1S-1859

Bolt (Tri) 188 6V-1792

Nut 376 1S-1860

1 Outrigger chains consist of D6H components: refer to shoe section for special tri-track shoes.2 Not part of link assembly; required to assemble track group.

799


225SA, FB227, 229, 231 TRACK SHOES8.00" (203.2 mm) PITCH -- 3/4" BOLT


Extreme Service 1 22.0" (560 mm) 6Y-6411


Extreme Service (Clipped Grouser, Trapezoidal Opening) 1 24.0" (610 mm) 3Q-5391



Tri-Extreme Service (Off-set RH) 2 28.0" (710 mm) 1Q-4717

Tri-Extreme Service (Off-set LH) 2 28.0" (710 mm) 1Q-4718

1 With moderate service heat treat specifications2 FB227 machine option.

225SA, FB227, 229, 231 CLASSIC TRACK SHOES8.00" (203.2 mm) PITCH -- 3/4" BOLT




Extreme Service (Clipped Grouser, Trapezoidal Opening) 24.0" (610 mm) 292-5634

Extreme Service (Clipped Grouser) 28.0" (710 mm) 288-6679








225SA, FB227, 229, 231 SPROCKETS10W, 1AG, 1GF, 1NK, 2LJ, 51U2832-UP, 5WJ, 76U1649-UP


Sprocket Assembly (25 Teeth) (Not for use with hybrid links) 1 5V-4969

Rim (25 Teeth) 1 246-5228

225SA SPROCKETS51U1-2831, 76U1-1648


Sprocket Assembly (25 Teeth) (Not for use with hybrid links) 1 289-2206

Rim (25 Teeth) 1 246-5228

800


225SA, FB227, 229, 231 CLASSIC SPROCKETS10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U

TO BE USED ONLY WITH CLASSIC LINK ASSEMBLY


Rim (25 Teeth) 1 289-2207

225SA, FB227, 229, 231 IDLERS10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U


Components of Group

Idler Assembly 1 8E-6135 1


Bearing 2 1 8P-6651

Shaft 1 2V-8627 1

Bearing Block 2 9C-4224 1






Bolt 12 9B-7237

Washer 12 8T-4896

Plug 1 2P-0347

Pin 2 5M-5000

Bolt 2 7X-0313

Washer 2 7X-0563




1 Service Replaced by Classic Idler Group part number 288-3691.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

225SA, FB227, 229, 231 CLASSIC IDLERS10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U


Idler Group (Includes Bearing Blocks) 1 288-3691

801


225SA, FB227, 229, 231 CARRIER ROLLERS10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U


Group 4 3T-3206 1

Components of Group


Shaft 1 3T-3207

Cup 2 9S-3581

Cone 2 9S-3582

Ring 1 1M-7914

Cover 1 5M-2043

Collar 1 9S-3567

Plug 1 2P-0347

Bolt 3 0S-1594






1 Optional Service Replaced by Classic Carrier Group part number 188-5590.2 Component of preceding assembly or group.

225SA, FB227, 229, 231 CLASSIC CARRIER ROLLERS10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U



802


225SA, FB227, 229, 231 TRACK ROLLERSEXCAVATOR STYLE ROLLER

10W343-UP, 1AG, 1GF, 1NK, 2LJ, 5WJ, 76U6074-UP


Single Flange (SF) 16 8E-4576 1

Components of Group


Bearing 2 1 9W-3359

Shaft 1 9W-4962


Pin 2 9W-4960




Plug 1 9W-2146

Mounting Hardware 3

Bolt 4 3B-2968

Washer 4 5P-8248

1 Optional Service Replaecment by Classic Roller Group part number 288-3690.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 These components are not included in the roller group; quantities shown are required to mount each roller.

225SA, FB227, 229, 231 CLASSIC TRACK ROLLERS10W343-UP, 1AG, 1GF, 1NK, 2LJ, 5WJ, 76U6074-UP



Mounting Hardware 1

Bolt 4 3B-2968

Washer 4 5P-8248

1 These components are not included in the roller group; quantities shown are requried to mount each roller.

225SA, FB227 STANDARDIZED TRACK ROLLERS10W216-342, 51U, 76U1-6073





Mounting Hardware 1

Cap 2 317-9079

Bolt (3/4") 4 1D-4610

Washer 2 5P-8248


803


FB227, STANDARDIZED TRACK ROLLERS10W1-215





Mounting Hardware 1

Cap 2 317-9078

Bolt (5/8") 4 1D-4585

Washer 2 2S-0736


225SA, FB227 TRACK ROLLERS10W216-342, 51U, 76U1-6073



Components of Group



Bearing 3 1 8P-5197

Shaft 1 116-6702 4



Bolt 12 2P-3201





Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 6

Bolt 4 1D-4608

Washer 4 5H-1504

1 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248. Optional ServiceReplaced by Classic Track Roller Group part number 188-5272.2 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.4 Replaces former 7G-0419 shaft, requires 2, 7G-0418 end collars. Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.5 If 7G-0419 shaft is used, use 1 - 7G-0418 and 1 - 7G-0417 end collar.6 These components are not included in the roller group; quantities shown are required to mount each roller.

804


225SA, FB227 CLASSIC TRACK ROLLERS10W216-342, 51U, 76U1-6073



Mounting Hardware 1

Bolt 4 1D-4608

Washer 4 5H-1504


FB227 TRACK ROLLERS10W1-215



Components of Group

Roller Shell (SF) 1 6Y-2902 2


Bearing 3 1 8P-5197

Shaft 1 116-6702 4



Bolt 12 2P-3201





Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 6

Bolt 4 1A-8537

Washer 4 2S-0736

1 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736. Optional ServiceReplaced by Classic Track Roller Group part number 175-8035.2 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.4 Replaces former 7G-0419 shaft, requires 2, 7G-0418 end collars. Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.5 If 5M-4448 shaft is used, use 1 - 5M-4436 and 1 - 5M-4435 end collar.6 These components are not included in the roller group; quantities shown are required to mount each roller.

805


FB227 CLASSIC TRACK ROLLERS10W1-215



Mounting Hardware 1

Bolt 4 1A-8537

Washer 4 2S-0736


225SA, FB227, 229, 231 TRACK GUIDING GUARDS (SEGMENTED)1AG, 1GF, 1NK, 51U, 5WJ, 76U



Bolt 4 1A-8063

Spacer 4 4F-6568

Bolt 12 7X-0403

Washer 12 7X-0529

225SA, FB227, 229, 231 TRACK ROLLER GUARDSFULL LENGTH

10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U






Tube 14 8V-9129

Bolt 14 6M-2001

Nut 14 2J-3507

Bolt 40 8S-9093

Washer 68 7X-0529

806


235 TRACKSHORT

1FD, 32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 9PC8.50" (215.9 mm) PITCH -- 7/8" BOLT

QUANTITY

FORMERSEALED

PART NUMBER

SEALEDPART

NUMBER

Link Assembly -- 49 Section 2 - 1 8E-8643 2


Track Links

RH Regular 49 7T-9823 130-5333

LH Regular 49 7T-9824 130-5334

Other Components

Pin 48 8E-4272 8E-4272

Master Pin 1 8E-4273 8E-4273

Bushing 48 1M-3669 1M-3669

Master Bushing 1 1M-3670 1M-3670

Seal (Spring Washer) 196 8M-6239 8M-6239

Spacer 2 8M-6238 8M-6238

Track Hardware 3

Bolt 196 7H-3599 5P-4028

Nut 196 7T-9825 7T-9825

1 Upgrade to 49 Section 8E-8643 Link Assembly.2 Serviced Replaced by Classic Grease Link Assembly part number 288-5754.3 Not part of link assembly; required to assemble track group.

807


235 TRACKLONG

1FD, 32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 8KJ, 8TJ, 81X, 83X, 9PC8.50" (215.9 mm) PITCH -- 7/8" BOLT


FORMERSEALED

PART NUMBER

SEALEDPART

NUMBER

Link Assembly -- 53 Section 2 - 1 8E-8644 2


Track Links

RH Regular 53 7T-9823 130-5333

LH Regular 53 7T-9824 130-5334

Other Components

Pin 52 8E-4272 8E-4272

Master Pin 1 8E-4273 8E-4273

Bushing 52 1M-3669 1M-3669

Master Bushing 1 1M-3670 1M-3670

Seal (Spring Washer) 212 8M-6239 8M-6239

Spacer 2 8M-6238 8M-6238

Track Hardware 3

Bolt 212 7H-3599 5P-4028

Nut 212 7T-9825 7T-9825

1 Upgrade to 53 Section 8E-8644 Link Assembly.2 Serviced Replaced by Classic Grease Link Assembly part number 288-5755.3 Not part of link assembly; required to assemble track group.

235 CLASSIC GREASE TRACK1FD, 32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 8KJ, 8TJ, 81X, 83X, 9PC

8.50" (215.9 mm) PITCH -- 7/8" BOLT




Track Links

RH Regular 289-0635 49 53

LH Regular 289-0636 49 53

Other Components

Pin 289-0638 48 52

Master Pin 289-0640 1 1

Bushing 289-0642 48 52


Seal Grease 267-3878 96 104

Spacer 289-0648 2 2

Track Hardware 1

Bolt 5P-4028 196 212

Nut 7T-9825 196 212

1 Not part of link assembly; required to assemble track group

808


235 CLASSIC GREASE TRACKFD, 32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 9PC

8.50" (215.9 mm) PITCH -- 3/4" BOLT




Track Links



Other Components

Pin 48 289-0638


Bushing 48 289-0642


Seal Grease 96 267-3878

Spacer 2 289-0648

Track Hardware 2

Bolt 196 188-5636

Nut 196 188-5856

1 If 53 section link assembly is required, order 288-3694 link assembly and add 4 sections.2 Not part of link assembly; required to assemble track group

235 TRACKHYBRID LINKS

32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 9PC8.50" (215.9 mm) PITCH -- 3/4" BOLT




Track Links



Other Components

Pin 48 8E-4272


Bushing 48 247-1475



Spacer 2 8M-6238

Track Hardware 2

Bolt 196 7H-3598

Nut 196 1S-1860

1 If installing new track replacement sprocket rim, use 248-2041 sprocket rim.2 Not part of link assembly; required to assemble track group

809


235 TRACK(49 & 53 SECTION): 1FD, 32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 9PC

8.50" (215.9 mm) PITCH -- 3/4" BOLT

SEALEDPART NUMBER 49 SECTION 53 SECTION

Link Assembly -- (Quantity 2) 8E-4275 1 -- 2


Track Links



Other Components

Pin 8E-4272 48 52


Bushing 1M-3669 48 52



Spacer 8M-6238 2 2

Track Hardware 3

Bolt 7H-3598 196 212

Nut 1S-1860 196 212

1 Service replaced by 246-5810 link assembly. If installing new track replacement sprocket rim, use new 248-2041 sprocket rim. OptionalService Replaced by Classic Grease Link Assembly part number 288-3694, to be used with Classic Sprocket part number 289-2211. ForSealed & Lubricated Track, order 49 Section (239-6883) Link Assembly; requires 30" double grouser master shoe (8E-4431). Forapplication restrictions, refer to IRM UC86-41.2 Order 246-5810 link assembly and add 4 sections. If installing new track replacement sprocket rim, use new 248-2041 sprocket rim.3 Not part of link assembly; required to assemble track group.

810


235 TRACK32K1-1300, 64R1-595

8.00" (203.2 mm) PITCH -- 3/4" BOLT

SEALEDPART


Link Assembly -- (Quantity 2) 8E-4713 1 8E-4714 2


Track Links

RH Master 6P-6129 1 1

LH Master 6P-6130 1 1



Other Components

Pin 4M-5989 46 53


Bushing 4M-5991 46 53



Spacer 8M-7290 2 2

Track Hardware 3

Bolt 1S-1859 188 216

Nut 1S-1860 188 216

1 Service replaced by 238-9956 hybrid link assembly. Hybrid link assembly can only be used with a worn (current rim part number9M-3818) sprocket, or new (new rim part number 246-5228) sprocket. Optional Service Replaced by Classic Grease Link Assembly partnumber 288-3705, if installing new sprocket rim use 289-2207 Classic sprocket. For Sealed & Lubricated Track, order a 41 section236-9866 Link Assembly and add appropriate number of sections.2 Service replaced by 238-9958 hybrid link assembly. Hybrid link assembly can only be used with a worn (current rim part number9M-3818) sprocket, or new (new rim part number 246-5228) sprocket. Optional Service Replaced by Classic Grease Link Assembly partnumber 288-3693, if installing new sprocket rim use 289-2207 Classic sprocket. For Sealed & Lubricated Track, order a 41 section236-9866 Link Assembly and add appropriate number of sections.3 Not part of link assembly; required to assemble track group.





811


235 CLASSIC TRACK SHOES8.50" (215.9 mm) PITCH 7/8 BOLT

(TYPE) WIDTH PART NUMBER

Moderate Service (Clipped Grouser) (Trap Opening) 28.0" (710 mm) 288-6668









Triple Grouser 30.0" (760 mm) 3N-0837

235 CLASSIC TRACK SHOES8.50" (215.9 mm) PITCH 3/4" BOLT








812


235 CLASSIC TRACK SHOES8.00" (203.2 mm) PITCH --3/4" BOLT




Extreme Service (Clipped Grouser, Trapezoidal Opening) 24.0" (610 mm) 292-5634

Extreme Service (Clipped Grouser) 28.0" (710 mm) 288-6679








235 SPROCKETS1FD, 32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 8KJ, 8TJ, 81X, 83X, 9PC

8.50" (215.9 mm) PITCH


Sprocket Assembly (24 Teeth) (Not for use with hybrid links) 1 3V-4527

Rim (24 Teeth) 1 248-2041

235 CLASSIC SPROCKETS1FD, 32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 8KJ, 8TJ, 81X, 83X, 9PC

8.50" (215.9 mm) PITCH


Rim (24 Teeth) 1 289-2211

235 SPROCKETS32K1-1300, 64R1-595

8.00" (203.2 mm) PITCH


Rim (25 Teeth) 1 246-5228

813


235 CLASSIC SPROCKETS32K1-1300, 64R1-595

8.00" (203.2 mm) PITCH


Sprocket Assembly (25 Teeth) (Not for use with Hybrid links) 1 289-2206

Rim (25 Teeth) 1 289-2207

235 IDLERS1FD, 2PG, 32K1301-UP, 3WG, 4DG, 4ED, 5AF, 64R596-UP, 7WC, 8KJ, 8TJ, 81X, 83X, 9PC


Idler Group 2 4E-8500 1

Components of Group


Bushing Assembly 2 117-3068 1

Bearing 2 2 8P-6651

Shaft 1 8E-7232 1

Bearing Block 2 4E-8505 1






Bolt 12 9B-7237

Washer 12 8T-4896

Plug 1 2P-0347

Pin 2 5M-5000

Bolt 2 7X-0313

Washer 2 7X-0563




1 Service Replaced by Classic Idler Group part number 288-3691.2 Component of preceding assembly or group; quantity shown is quantity per assembly

235 CLASSIC IDLERS1FD, 2PG, 32K1301-UP, 3WG, 4DG, 4ED, 5AF, 64R596-UP, 7WC, 8KJ, 8TJ, 81X, 83X, 9PC


Idler Group (Includes Bearing Blocks) 2 288-3691

814


235 IDLERS32K944, 32K1024-1300


Components of Group

Idler Assembly 1 8E-6135 1


Bearing 2 2 8P-6651

Shaft 1 2V-8627 1







Bolt 12 9B-7237

Washer 12 8T-4896

Plug 1 2P-0347

Pin 2 5M-5000

Bolt 2 7X-0313

Washer 2 7X-0563




1 Service Replaced by Classic Idler Group part number 288-3691.2 Component of preceding assembly or group; quantity shown is quantity per assembly

815


235 IDLERS32K1-943, 32K945-1023, 64R1-595


Components of Group

Idler Assembly 1 5M-5009 1


Bearing 2 2 8P-5197

Shaft 1 5M-5005







Bolt 12 0S-1588

Washer 12 3B-4506

Plug 1 2P-0347

Pin 2 5M-5000

Bolt 2 7X-0313

Washer 2 7X-0563




1 Optional Service Replaced by Classic Idler Assembly part number 175-8263.2 Component of preceding assembly or group; quantity shown is quantity per assembly

816


235 CARRIER ROLLERS1FD, 2PG, 32K1301-UP, 3WG, 4DG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 8KJ, 8TJ, 9PC


Group 4 1P-8717 1

Components of Group


Shaft 1 1P-8715

Cup 2 9S-3581

Cone 2 9S-3582

Ring 1 7H-4574

Cover 1 5M-2043


Plug 1 2P-0347

Bolt 3 0S-1594

Plate 1 8P-6188

Bolt 2 6V-4791














Toric Ring 2 2 162-2166

1 Optional Service Replaced by Classic Carrier Roller Group part number 188-5600.2 Component of preceding group; quantity shown is the quantity per group.

235 CLASSIC CARRIER ROLLERS1FD, 2PG, 32K1301-UP, 3WG, 4DG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 8KJ, 8TJ, 9PC



817


235 CARRIER ROLLERS32K1-1300, 64R1-595


Group 4 3T-3206 1

Components of Group


Shaft 1 3T-3207

Cup 2 9S-3581

Cone 2 9S-3582

Ring 1 1M-7914

Cover 1 5M-2043

Collar Assembly 1 9S-3567

Plug 1 2P-0347

Bolt 3 0S-1594

Plate 1 8P-6188

Bolt 2 5K-9107









1 Optional Service Replaced by Classic Carrier Roller Group part number 188-5590.2 Component of preceding group; quantity shown is the quantity per group.

235 CLASSIC CARRIER ROLLERS32K1-1300, 64R1-595



818


235 TRACK ROLLERSEXCAVATOR STYLE ROLLER7/8" MOUNTING HARDWARE

1FD, 2PG, 3WG, 4DG, 4ED, 5AF, 64R2014-UP, 7WC302-UP, 83X665-UP, 8KJ, 8TJ, 9PC

(PER MACHINE) QUANTITY PART NUMBERHEAVY DUTY PART

NUMBER

Single Flange (SF) 18 8E-4579 1 -- 2

Components of Group

Roller Shell (SF) 1 8E-4580 9W-5582 3

Bearing 4 1 9W-3359 9W-9498

Shaft 1 9W-2210 3T-7392

End Collar 2 8E-5456 5 -

Retainer Assembly 2 - 9W-6632

Thrust Washer 6 1 - 8E-7510

Dowel 6 4 - 2H-1190

Bolt 12 - 0S-1595

Washer 12 - 5P-8245

Ring 2 - 6T-4871

Pin 2 9W-2212 -

Seal -- Duo-Cone Group (Symmetric) 2 9W-2201 --

Toric Ring 4 2 6H-1309 --

Seal -- Duo-Cone Group (Inverted) 2 -- 7T-0158

Toric Ring 4 1 -- 6P-8912

O-Ring 4 1 -- 6V-2701

Seal -- Shaft O-Ring 2 8F-6711 -

Seal -- Retainer 2 - 5F-3106

Stopper 1 - 7G-4332

Plug 1 9W-2146 6Y-0473


Seal -- Duo-Cone Group (Symmetric) (Steel Mill) 2 4S-8984 --

Toric Ring 4 2 9M-9730 --

Seal -- Duo-Cone Group (Inverted) (Steel Mill) 2 -- 7T-5133

Toric Ring 4 1 -- 7T-1094

O-Ring 4 1 -- 6V-2701

1 Optional Service Replaced by Classic Track Roller Group part number 175-8216.2 Use 8E-4579 Roller Group & 4 - 1D-4631 Bolts or 1 - Roller Group (SF) 323-5925, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer9H-1031.3 Serviced Replaced By: 1 - Roller Group (SF) 323-5925, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.4 Component of preceding assembly or group; quantity shown is per assembly or group.5 Excavator Style Collar6 These components are only to repair retainer assembly. See Special Instruction SEHS8515.

819


235 CLASSIC TRACK ROLLERSEXCAVATOR STYLE ROLLER7/8" MOUNTING HARDWARE

1FD, 2PG, 3WG, 4DG, 4ED, 5AF, 64R2014-UP, 7WC302-UP, 83X665-UP, 8KJ, 8TJ, 9PC



Mounting Hardware 1

Bolt 4 1D-4631

Washer 4 5P-8249

1 These components are not included in the roller group; quantitiesshown are required to mount each roller.

235 TRACK ROLLERSHARD BORE ROLLER

7/8" MOUNTING HARDWARE32K1301-UP, 64R596-2013, 7WC1-301, 81X, 83X1-664



Components of Group



Bearing 2 1 8P-6651

Shaft 1 9S-4324 3


Bolt 12 2P-3201

Ring 2 6H-2953





Stopper 1 7G-4332

Plug 1 6Y-0473




1 Optional Service Replaced by Classic Track Roller Group part number 188-5596.2 Component of preceding assembly or group; quantity shown is per assembly or group.3 Replaces former 9S-0313 shaft; requires 2 - 9S-0312 end collars.4 If 9S-0313 shaft is used, use 1 - 9S-0311 and 1 - 9S-0312 end collar.

820


235 CLASSIC TRACK ROLLERSHARD BORE ROLLER

7/8" MOUNTING HARDWARE32K1301-UP, 64R596-2013, 7WC1-301, 81X, 83X1-664



235 STANDARDIZED TRACK ROLLERS5/8" Mounting Hardware

32K1-1300, 64R1-595



Single Flange (SF) (Arctic) 16 1 288-0945

Single Flange (SF) (High Heat) 16 1 288-0947

Mounting Hardware 2

Cap 2 317-9078

Bolt (5/8") 4 1D-4585

Washer 2 2S-0736

1 20 Required for long undercariage.2 These components are not included in the roller group; quantities shown are required to mount each roller.

821


235 TRACK ROLLERS5/8" MOUNTING HARDWARE

32K1-1300, 64R1-595


NUMBER

Single Flange (SF) 16 1 118-1614 2 122-0216 3

Components of Group

Roller Shell (SF) 1 6Y-2902 4 9G-8027 4


Bearing 5 1 8P-5197 8P-5197

Shaft 1 116-6702 6 116-6702 6

End Collar 2 5M-4436 7 5M-4436 7

Ring 2 5M-4443 5M-4443

Bolt 12 2P-3201 1A-2029

Washer 12 -- 5M-2894

Seal -- Duo-Cone Group 2 6Y-0925 1M-8747

Toric Ring 5 2 8H-2262 8H-2262



Stopper 1 7G-4332 7G-4332

Plug 1 6Y-0473 6Y-0473



Toric Ring 5 2 9M-9730 9M-9730

1 20 required for long undercarriage.2 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736. Optional ServiceReplaced by Classic Track Roller Group part number 175-8035.3 Increased Bore Hardness. Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer2S-0736. Optional Service Replaced by Classic Track Roller Group part number 175-8035.4 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.5 Component of preceding assembly or group; quantity shown is per assembly or group.6 Replaces former 7G-0419 shaft, requires 2, 7G-0418 end collars. Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.7 If 5M-4448 shaft is used, use 1 - 5M-4436 and 1 - 5M-4435 end collar.

235 CLASSIC TRACK ROLLERS5/8" MOUNTING HARDWARE

32K1-1300, 64R1-595



1 20 required for long undercarriage.

822


235 TRACK GUIDING GUARDS (SEGMENTED)1FD, 2PG, 32K1301-UP, 3WG, 4DG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 8KJ, 8TJ, 9PC



Bolt 8 1D-4635

Washer 8 7X-0529

Strip 4 3V-5055

Bolt 16 0S-1592

Washer 16 7X-0513

235 TRACK GUIDING GUARDS (SEGMENTED)32K1-1300, 64R1-595



Bolt 4 1A-8063

Bolt 12 7X-0403

Washer 12 7X-0529

Spacer 4 4F-6568

235 TRACK ROLLER GUARDSFULL LENGTH, SHORT UNDERCARRIAGE

1FD, 2PG, 32K1301-UP, 3WG, 4DG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 8KJ, 8TJ, 9PC




Tube 16 3V-4812

Bolt 16 6M-2001

Nut 16 2J-3507

Bolt 32 9S-1363

Washer 16 8T-5361

Spacer 32 3V-5305

823


235 TRACK ROLLER GUARDSFULL LENGTH, SHORT UNDERCARRIAGE

32K1-1300, 64R1-595






Tube 14 8V-9129

Bolt 14 6M-2001

Nut 14 2J-3507

Bolt 40 8S-9093

Washer 68 7X-0529

235 TRACK ROLLER GUARDSFULL LENGTH, LONG UNDERCARRIAGE

32K1-1300, 64R1-595


Tube 18 8V-9129

Bolt 18 6M-2001

Nut 18 2J-3507

Bolt 48 8S-9093

Washer 84 3K-5234

235 TRACK ROLLER GUARDSFULL LENGTH, LONG UNDERCARRIAGE

8KJ




Tube 18 3V-4812

Bolt 18 6M-2001

Nut 18 2J-3507

Bolt 36 9S-1363

Washer 18 8T-5361

Spacer 36 3V-5305

824


235 CLASSIC GREASE TRACK32K1-1300, 64R1-595

8.00" (203.2 mm) PITCH -- 3/4" BOLT




Track Links

RH Regular 289-0631 47 54

LH Regular 289-0632 47 54

Other Components

Pin 175-8929 46 53

Master Pin 289-0639 1 1

Bushing (66.6 mm OD) 289-0641 46 53


Seal Grease 289-0645 92 106

Spacer 289-0647 2 2

Track Hardware 2

Bolt 188-5633 188 216

Nut 188-5856 188 216

1 If installing new sprocket rim use 289-2207 Classic sprocket.2 Not part of link assembly: required to assemble track group.

825


245 TRACK1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP

10.25" (260.4 mm) PITCH -- 1" BOLT

QUANTITYSEALED

PART NUMBER



Track Links



Other Components

Pin 44 290-0841


Bushing 44 290-0825



Spacer 2 1S-4445

Track Hardware 2

Bolt 180 3T-6308

Nut 180 1S-6421

1 Serviced Replaced by Classic Sealed Link Assembly part number 290-0819.2 Not part of link assembly; required to assemble track group.

826


245 TRACK82X1-572, 84X1-597, 94L1-465, 95V1-989

9.00" (228.6 mm) PITCH -- 1" BOLT

QUANTITYSEALED

PART NUMBER



Track Links



Other Components

Pin 50 1M-1455


Bushing 50 290-0844



Spacer 2 8M-2621

Track Hardware 2

Bolt 204 2M-5657

Nut 204 2V-0250

Special Group

Pin and Bushing Group (41 Section, Common with D8 Pin & Bushing GP) 1 2P-6026

1 Serviced Replaced by Classic Sealed Link Assembly part number 290-0837.2 Not part of link assembly; required to assemble track group.

827


245 CLASSIC SEALED TRACK1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP

10.25" (260.4 mm) PITCH -- 1" BOLT




Track Links



Other Components

Pin 44 290-0841


Bushing 44 290-0825


Seal (Spring Washer) 180 290-0835

Spacer 2 290-0847

Track Hardware 1

Bolt 180 3T-6308

Nut 180 1S-6421


245 CLASSIC SEALED TRACK82X1-572, 84X1-597, 94L1-465, 95V1-989

9.00" (228.6 mm) PITCH -- 1" BOLT




Track Links



Other Components

Pin 50 290-0822


Bushing 50 290-0844


Seal (Spring Washer) 204 290-0846

Spacer 2 290-0836

Track Hardware 1

Bolt 204 2M-5657

Nut 204 2V-0250


828





Double Grouser 24.0" (610 mm) 9G-7109





Double Grouser 24.0" (610 mm) 2V-1687

Double Grouser 32.0" (810 mm) 8K-1390

Double Grouser 36.0" (915 mm) 8K-1392

245 SPROCKETS1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP

10.25" (260.4 mm) PITCH -- 1" BOLT


Sprocket Assembly (22 Teeth) 1 7V-0753

Rim (22 Teeth) 1 7T-1310 1

1 Service Replaced by Classic sprocket part number 290-0861.

245 SPROCKETS82X1-572, 84X1-597, 94L1-465, 95V1-989

9.00" (228.6 mm) PITCH -- 1" BOLT


Sprocket Assembly (25 Teeth) 1 8K-4054

Rim (25 Teeth) 1 2M-8810

245 CLASSIC SPROCKETS1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP

10.25" (260.4 mm) PITCH -- 1" BOLT


Rim (22 Teeth) 1 290-0861

829


245 IDLERS1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP

10.25" (260.4 mm) PITCH


NUMBER

Idler Group 2 6W-5557 -

Components of Group

Idler Assembly 1 7T-9264 1 106-0458 2

Bearing 3 2 9S-4540 9S-4540

Shaft 1 186-2836 4 186-2836 4

Bearing Block 2 4E-0275 4E-0275

Retainer 2 8P-5394 8P-5394


Seal -- Duo-Cone Group 2 6Y-0925 6Y-0925

Toric Ring 5 2 8H-2262 8H-2262


Retainer O-Ring 2 5F-3106 5F-3106

Bolt 24 5P-5855 5P-5855

Washer 24 5P-8245 5P-8245

Stopper 1 9G-4872 9G-4872

Plug 1 6Y-0473 6Y-0473

Pin 2 1S-3513 1S-3513

Bolt 2 8T-9389 --

Washer 2 6F-7831 --



Toric Ring 3 2 9M-9730 9M-9730

1 Fabricated Design2 Cast Design3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.4 With former shaft 138-4332 use 9G-5664 stopper.5 Component of preceding assembly or group; quantity shown is quantity per assembly or group

830


245 IDLERS82X1-572, 84X1-597, 94L212-465, 95V411, 95V437-989

9.00" (228.6 mm) PITCH


Components of Group

Idler Assembly 1 3V-5376

Bearing 1 2 9S-4540

Shaft 1 186-2836 2

Bearing Block 2 4E-0275

Retainer 2 8P-5394





Retainer )-Ring 2 5F-3106

Bolt 24 0S-1587

Washer 24 8T-4223

Stopper 1 9G-4872

Plug 1 6Y-0473

Pin 2 1S-3513

Bolt 2 8T-9389

Washer 2 6F-7831




1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 With former shaft 138-4332 use 9G-5664 stopper.

831


245 IDLERS94L1-211, 95V1-410, 95V412-436

9.00" (228.6 mm) PITCH


Components of Group

Idler Assembly 11


Shaft 1 9S-4324

Bearing Block 2

Seal -- Duo-Group 2 9W-2142





Bolt 12 0S-1585

Washer 12 3B-4508

Plug 1 2P-0347

Pin 2 1S-3513

Bolt 2 9S-1366

Washer 2 6F-7831




1 Idler Assembly no longer serviced.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

832


245 CARRIER ROLLERS1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP

10.25" (260.4 mm) PITCH


Group 6 9G-7034

Components of Group

Roller Shell 1 9G-7033

Shaft 1 8P-6255

Cup 2 7K-5448

Cone 2 7K-5449

Ring 1 9H-7759

Cover 1 5M-2043


Bolt 3 0S-1594

Plate 1 3T-6269

Bolt 2 6F-7030






Plug 1 2P-0347


833


245 CARRIER ROLLERS82X1-572, 84X1-597, 94L1-465, 95V1-989

9.00" (228.6 mm) PITCH


Group 61

Components of Group

Roller Shell 11

Shaft 1 8P-6255

Cup 2 7K-5448

Cone 2 7K-5449

Ring 1 9H-7759

Cover 1 5M-2043


Bolt 3 0S-1594

Plate 1 3T-6269

Bolt 2 6F-7030






Plug 1 2P-0347

1 Service replaced by Classic Carrier Roller 188-5612.2 Component of preceding assembly or group.

834


245 TRACK ROLLERS1SJ, 4LK, 6MF, 7ZJ, 82X727-UP, 84X990-UP

10.25" (260.4 mm) PITCH



Components of Group

Roller Shell (SF) 1

Bushing Assembly 1 2 9W-6714

Shaft 1 9W-6715


Pin 2 9W-6718


Toric Ring 1 2 4K-0173


Plug 1 9W-2146

Mounting Hardware 2

Bolt (1") 4 1D-4639

Washer 4 5P-8250


245 TRACK ROLLERS82X1-726, 84X1-989, 94L, 95V

10.25" (260.4 mm) PITCH



Components of Group

Roller Shell (SF) 1

Bushing Assembly 1 2 9W-6714

Shaft 1 9W-6715


Pin 2 9W-6718


Toric Ring 1 2 4K-0173


Plug 1 9W-2146

Mounting Hardware 2

Bolt (7/8") 4 1D-4630

Washer 4 5P-8249


835


245 TRACK ROLLERS82X1-726, 84X1-989, 94L, 95V

9.00" (228.6 mm) PITCH



Components of Group


Bearing 2 2 9S-4540

Shaft 1 123-1191


Retainer 2 8P-5394


Bolt 24 0S-1587

Washer 24 3H-7654

Ring 2 6H-6237





Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 3

Bolt (7/8") 4 1D-4630

Washer 4 9H-1031

1 If mounting bolt loosening problems occur with this roller group, the preferred service replacement is 8E-0831.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 These components are not included in the roller group; quantities shown are required to mount each roller.

245 TRACK GUIDING GUARDS (SEGMENTED)1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP


Front

Guard Assembly 2 -



Bolt 20 0S-1592

Washer 20 5P-8247

Rear

Guard Assembly 2 9C-3628

Wear Strip 4 9C-3416

Bolt 8 7X-0407

Washer 8 3V-5305

Bolt 20 0S-1589

Washer 20 8T-4122

836


245 TRACK GUIDING GUARDS (SEGMENTED)82X1-572, 84X1-597, 94L1-465, 95V1-989


Front



Bolt 20 0S-1592

Washer 20 3B-4510

Rear



Bolt 8 1D-4637

Washer 8 3P-6600

Bolt 20 0S-1592

Washer 20 3B-4510

245 TRACK ROLLER GUARDSFULL LENGTH

1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP




837

Excavators/Front ShovelsE70B, E70

E70B, E70 TRACK 1

3BG1-UP, 3CG1-UP, 5TG1-UP, 6AK1-UP, 7YF1-UP5.31" (135.0 mm) PITCH -- 1/2" BOLT

QUANTITYSEALED

PART NUMBER



Track Links





Other Components

Pin 41 093-0515


Bushing 41 102-8107


Spacer 2 093-0036


Track Hardware 2

Bolt 168 102-8072

Nut 168 102-8073

1 Adaptable to MS70-8 machines2 Not part of link assembly; required to assemble track group.

E70B, E70 TRACK SHOES 1

5.31" (135.0 mm) PITCH -- 1/2" BOLT

TYPE WIDTH QUANTITYPART

NUMBER



1 Adaptable to MS70-8 machines.

E70B SPROCKET5TG00660- UP, 6AK, 7YF


Sprocket Rim 1 096-2144

Bolt 12 8C-3425

838


E70B SPROCKET5TG 1 - 00659


Sprocket Rim 1 1R-5440

Bolt 12 8C-3425

E70 SPROCKETS 1

3BG, 3CG


Sprocket Rim 1 096-2144

Bolt 12 167-4339

Washer 12 095-0818

1 Adaptable to MS70-8 machines

E70B, E70 IDLERS 1


Components of Group

Idler Assembly (Includes components below) 1 1R-8938

Other Components


Shaft 1 093-1701

Bearing Block 2 1R-8939



1 Adaptable to MS70-8 machines

E70B CARRIER ROLLERS 1

5TG, 6AK, 7YF


Group 2 -- 2

Components of Group

Roller Shell - - 3

Bushing 2 099-6461


Seal -- Cover 1 095-1541


1 Adaptable to MS70-8 machines2 Use 277-8576 Carrier Roller.3 Roller Shell not serviced.

839


E70 CARRIER ROLLERS 1

3BG, 3CG


Group 2 093-4333

Components of Group

Roller Shell - - 2

Bushing 2

Shaft 1

Ring 1 6V-5200

Seal -- Duo-Cone Group 1

Seal -- Cover 1 095-1663


1 Adaptable to MS70-8 machines2 Roller Shell not serviced.

E70B TRACK ROLLERS5TG1-UP, 6AK1-UP, 7YF1-UP



Components of Group

Roller Shell (SF) - - 1

Bearing 2 5I-6274

Shaft 1


Plug 1 095-0966

Mounting Hardware 2

Bolt 4 8T-4648

Washer 4 085-5519

1 Roller shell not serviced.2 These components are not included in the roller

840


E70 TRACK ROLLERS3BG1-UP, 3CG1-UP



Components of Group


Bushing 2

Shaft 1

End Collar 2



Plug 1 095-0966

Mounting Hardware 2

Bolt 4 099-4329

Washer 4 7X-0622

1 Roller shell not serviced.2 These components are not included in the roller

841

Excavators/Front ShovelsE120B, E120, E110B, E110

E120B, E120 TRACK 1

1LF1-UP, 1MF1-UP, 4XK1-UP, 6JF1-UP, 7NF1-UP6.75" (171.5 mm) PITCH -- 16 mm BOLT

QUANTITYGREASED

PART NUMBER



Track Links

RH Master 1 4I-7477

LH Master 1 4I-7478



Other Components

Pin 42 162-4305



Bushing 42 162-4304


Seal (Poly -W) 84 162-4307

Seal- Master (Poly -W) 2 176-4872

Track Hardware 2

Bolt 172 4I-7538

Bolt 3 86 093-0261

Bolt 3 86 093-0259

Nut 172 5I-6125

1 Adaptable to MS120-8 machines.2 Not part of link assembly; required to assemble track group.3 Required for Self-Cleaning shoes.

842


E110, E110B TRACK 1

E110 (Quantity 2): 1MJ1-UP, 3FG1-UP, 3GG1-UPE110B (41 SECTION): 5GK1-UP, 8MF1-UP, 9HF1-UP

6.75" (171.5 mm) PITCH -- 16 mm BOLT

1 Adaptable to MS110-8 machines.2 Order 162-4303 link assembly and remove 2 sections.3 Not part of link assembly; required to assemble track group.4 Required for Self-Cleaning shoes.

E120B, E120, E110B, E110 TRACK SHOES 1

6.75" (171.5 mm) PITCH -- 16 mm BOLT






Self-Cleaning 30.3" (770 mm) 096-0231

Flat 19.7" (500 mm) 096-0240

1 Adaptable to MS120-8 and MS110-8 machines.

GREASEPART


Link Assembly -- Section 39 -- 2 162-4303 2


Track Links

RH Master 4I-7477 1 1

LH Master 4I-7478 1 1



Other Components

Pin 162-4305 38 40

Master Pin 099-0653 1 1

Cotter Pin 095-0863 1 1

Bushing 162-4304 38 40


Seal (Poly -W) 162-4307 76 80

Seal- Master (Poly -W) 176-4872 2 2

Track Hardware 3

Bolt 4I-7538 156 164

Bolt 4 093-0261 78 82

Bolt 4 093-0259 78 82

Nut 5I-6125 156 164

843


E120B SPROCKETS 1

6JF, 7NF, 4XK



Bolt 15 6V-8201


E110B SPROCKETS 1

8MF, 9HF, 5GK


Sprocket Assembly (21 Teeth) 1 -- 2

Bolt 15 8T-7338

1 Adaptable to MS110-8 machines.2 099-5350 Sprocket Assembly serviced by 4I7472 Sprocket Rim.

E120, E110 SPROCKETS 1

1MF, 1MJ, 3FG102-UP, 3GG4909-UP



Bolt 16 6V-5686

Washer 16 9X-8257


E120, E110 SPROCKETS 1

1LF, 3FG1-101, 3GG1-4908



Bolt 15 6V-5686

Washer 15 9X-8257


844


E120B, E110B IDLERS 1

6JF, 7NF, 4XK, 8MF, 9HF, 5GK


Components of Group

Idler Assembly 1 --






E120, E110 IDLERS 1

1LF, 1MF, 3FG, 3GG, 1MJ


Components of Group

Idler Assembly 1 --


Shaft 1 093-1697




E120B, E110B CARRIER ROLLERS 1



Components of Group

Group 2 --

Roller Shell - - 2

Bushing 2 099-0185

Shaft 1 099-0182 3


Seal -- Cover 1 6V-7609


1 Adaptable to MS120-8 and MS110-8 machines.2 Roller shell not serviced.3 Serviced Replaced By: 099-5516.

845


E120, E110 CARRIER ROLLERS 1



Group 2 093-6946

Components of Group

Roller Shell - - 2



1 Adaptable to MS120-8 and MS110-8 machines.2 Roller shell not serviced.

E120B, E110B TRACK ROLLERS 1

6JF, 7NF, 4XK, 5GK, 8MF, 9HF



Components of Group

Roller Shell (SF) - -- 2

Bushing 2 099-0195



Plug 1 095-0966

Mounting Hardware 3

Bolt 4 7X-2555

Washer 4 9X-8257

1 Adaptable to MS 120-8 and MS110-8 machines.2 Roller shell not serviced.3 These components are not included in the roller group; quantities shown are required to mount each roller.

846


E120, E110 TRACK ROLLERS 1




Components of Group


Bushing 2 093-1844

Shaft 1

End Collar 2



Plug 1 095-0966

Mounting Hardware 3

Bolt 4 099-4347

Washer 4 9X-8257

1 Adaptable to MS120-8 and MS110-8 machines.2 Roller shell not serviced.3 These components are not included in the roller group; quantities shown are required to mount each roller.

E120B, E110B TRACK GUIDING GUARDS 1




Bolt 8 8T-4779

Washer 8 9X-8257


847

Excavators/Front ShovelsE140

E140 TRACK 1

1NF1-UP, 1PF1-UP6.75" (171.5 mm) PITCH -- 16 mm BOLT

QUANTITYGREASED

PART NUMBER



Track Links

RH Master 1 4I-7477

LH Master 1 4I-7478



Other Components

Pin 43 162-4305


Bushing 43 162-4304


Seal (Poly -W) 86 162-4307

Seal- Master (Poly -W) 2 176-4872


Track Hardware

Bolt 176 096-1043

Bolt 2 88 093-0261

Bolt 2 88 093-0259

Nut 176 093-0319

1 Adaptable to MS140-8 machines.2 Required for Self-Cleaning shoes.

E140 TRACK SHOES 1

6.75" (171.5 mm) PITCH -- 16 mm BOLT


Self-Cleaning 30.3" (770 mm) 096-0231


E140 SPROCKETS 1


Sprocket Assembly 1 096-8047

Bolt 22 8T-0375


848


E140 IDLERS 1


Components of Group








Group 2 093-6946

Components of Group

Roller Shell 1 -- 2

Ring 1 8T-4241



1 Adaptable to MS140-8 machines.2 Roller shell not serviced.

E140 TRACK ROLLERS 1



Components of Group

Roller Shell (SF) 1 -- 2

Bushing 2 093-1844



Plug 1 095-0966

Mounting Hardware 3

Bolt 4 096-7698

Washer 4 9X-8257

1 Adaptable to MS140-8 machines.2 Roller shell not serviced.3 These components are not included in the roller group; quantities shown are required to mount each roller.

849

Excavators/Front ShovelsE180, EL180

E180, EL180 TRACK 1

E180 (48 SECTION): 1RF1-UP, 2BF1-UP, 5HG1-UPEL180 (52 SECTION): 4EF1-UP, 4HF1-UP6.91" (175.5 mm) PITCH -- 18 mm BOLT

UNSEALEDPART


Link Assembly -- (Quantity 2) 093-1927 -- 2


Track Links

RH Master 093-2000 1 1

LH Master 093-1999 1 1

RH Regular 095-7130 47 51

LH Regular 093-1979 47 51

Other Components

Pin 093-0509 47 51

Master Pin 093-0521 1 1

Bushing 093-1890 47 51


Spacer 093-0042 2 2

Track Hardware 3

Bolt 093-0262 192 208

Bolt 4 093-0264 192 208

Nut 093-0320 192 208

1 Adaptable to MS180-8 and MS180LC-8 machines.2 Order 48 section 093-1927 and add 4 sections.3 Not part of link assembly; required to assemble track group.4 Required for Self-Cleaning shoes.

E180, EL180 TRACK SHOES 1

6.91" (175.5 mm) PITCH -- 18 mm BOLT




1 Adaptable to MS180-8 and MS180LC-8 machines.

E180, EL180 SPROCKETS 1



Bolt 22 6V-5686

Washer 22 9X-8257


850


E180, EL180 IDLERS 1


Components of Group



Shaft 1 093-1693





E180, EL180 CARRIER ROLLERS 1


Group 4 096-5260

Components of Group

Roller Shell - - 2

Bushing 2 094-0563

Ring 1 095-0928


Seal -- Cover 1 8T-5376


1 Adaptable to MS180-8 and MS180LC-8 machines.2 Roller shell not serviced.

E180, EL180 TRACK ROLLERS 1



Components of Group


Bushing 2 093-1849




Plug 1 095-0967

Mounting Hardware 4

Bolt 4 093-0259

Washer 4 9X-8257

1 Adaptable to MS180-8 and MS180LC-8 machines.2 16 rollers required for long undercarriage.3 Roller shell not serviced.4 These components are not included in the roller group; quantities shown are required to mount each roller.

851


E180, EL180 TRACK GUIDING GUARDS (SEGMENTED) 1



Bolt 8 099-2668

Washer 8 095-0819


852

Excavators/Front ShovelsE200B, EL200B

E200B, EL200B TRACKE200B (45 SECTION): 4SG1-UP, 6KF1-UP, 6KG1-UP

EL200B (49 SECTION): 5EG1-UP, 7DF1-UP7.50" (190.5 mm) PITCH -- 20 mm BOLT

SEALEDPART


Link Assembly (Quantity 2) -- 1 -- 2


Track Links





Other Components

Pin 6Y-8186 44 48

Master Pin 188-3064 1 1

Cotter Pin 095-0863 1 1

Bushing 117-1371 44 48



Spacer 5S-0754 2 2

Track Hardware 3

Bolt 9W-3619 180 196

Nut 9W-3361 180 196

1 Upgrade to link assembly 194-1609 or Classic 308-6229.2 Upgrade to link assembly 194-1608 or Classic 308-6230.3 Not part of link assembly; required to assemble track group.

E200B, EL200B TRACK SHOES7.50" (190.5 mm) PITCH -- 20 mm BOLT






E200B, EL200B SPROCKETS



Bolt 14 8T-6430

853


E200B, EL200B IDLERS



Components of Group


Bushing Assembly 2 8E-4359

Shaft 1 099-1461






E200B, EL200B CARRIER ROLLERS


Group 4 8E-5600 1

Components of Group

Roller Shell 1 - 2

Shaft 1 8E-5601



1 320B Carrier Roller. Classic optional service replacement 286-9824.2 Roller shell not serviced.

854


E200B, EL200B TRACK ROLLERS


Single Flange (SF) 14 1 -- 2

Components of Group


Bushing 2 8E-5599

Shaft 1 -- 4





Plug 1 095-0967

Mounting Hardware 6

Bolt 4 7X-2564

1 16 rollers required for long undercarriage.2 Service replaced by 320B Roller 163-4143. Classic optional service replacement 286-9823.3 Roller shell not serviced.4 099-1463 Shaft serviced by (1) 8E-5035 Shaft (1) 5G-2247 Stopper (1) 6Y-0473 Plug.5 Component of preceding group.6 These components are not included in the roller group; quantities shown are required to mount each roller.

855

Excavators/Front ShovelsE240C, EL240C, E240B, EL240B, E240, EL240

EL240C, EL240B GREASE TRACKWITH BIG BUSHING.

5WG1-UP, 6MG1-UP, 9PK1-UP7.50" (190.5 mm) PITCH -- 20 mm


Link Assembly --50 Section 1 240-3056


Track Links

RH Master 1 8E-8585

LH Master 1 8E-8585



Other Components

Pin 49 6Y-8186


Bushing 49 190-3523


Cotter 1 095-0863

Seal (Poly - W) 98 158-4380

Seal - Master (Poly W) 2 158-4381

Track Hardware 1

Bolt 200 9W-3619

Nut 200 9W-3361


856


E240C/B, EL240C/B TRACK 1

E240C/B (46 SECTION): 2RL1-UP, 8SF1-UP, 9PF1-UPEL240C/B(50 SECTION): 5WG1-UP, 6MG1-UP, 9PK1-UP

7.50" (190.5 mm) PITCH -- 20 mm BOLT


Link Assembly (Quantity 2) 087-8805 087-8806 2


Track Links





Other Components

Pin 6Y-8186 45 49

Master Pin 188-3064 1 1

Cotter Pin 095-0863 1 1

Bushing 117-1371 45 49



Spacer 5S-0754 2 2

Track Hardware 3

Bolt 9W-3619 184 200

Nut 9W-3361 184 200

1 Also adaptable to MS240LC-8 machines and parts replacement for early E240.2 Canceled replaced by link assembly 240-3056.3 Not part of link assembly; required to assemble track group.

857


E240 TRACK 1

1FG, 2HF7.50" (190.5 mm) PITCH -- 20 mm BOLT

QUANTITY

FORMERUNSEALED

PART NUMBER

UNSEALEDPART

NUMBER

Link Assembly -- 46 Section 2 - 2 - 2


Track Links

RH Master 1 - -

LH Master 1 - 096-5259

RH Regular 45 093-1981 -

LH Regular 45 093-1980 -

Other Components

Pin 45 093-0502 093-0502

Master Pin 1 093-0522 093-0522

Bushing 45 095-7119 -

Master Bushing 1 095-7120 096-5256

Spacer 2 093-0043 093-0043

Track Hardware 3

Bolt 184 093-0266 093-0266

Bolt 4 184 096-0551 096-0551

Nut 184 093-0321 093-0321

1 Also adaptable to MS240LC-8 machines.2 Link Assembly no longer serviced.3 Not part of link assembly; required to assemble track group.4 For use with self-cleaning track shoes.

858


EL240 TRACK 1

4JF, 4MF7.50" (190.5 mm) PITCH -- 20 mm BOLT

QUANTITY

FORMERUNSEALED

PART NUMBER

UNSEALEDPART

NUMBER

Link Assembly -- 50 Section 2 - 2 096-5251


Track Links

RH Master 1 - -

LH Master 1 - 096-5259

RH Regular 49 093-1981 -

LH Regular 49 093-1980 -

Other Components

Pin 49 093-0502 093-0502

Master Pin 1 093-0522 093-0522

Bushing 49 095-7119 -

Master Bushing 1 095-7120 096-5256

Spacer 2 093-0043 093-0043

Track Hardware 3

Bolt 200 093-0266 093-0266

Bolt 4 200 096-0551 096-0551

Nut 200 093-0321 093-0321

1 Also adaptable to MS240LC-8 machines.2 Upgrade to 096-5251 Link Assembly.3 Not part of link assembly; required to assemble track group.4 For use with self-cleaning track shoes.

E240C/B, EL240C/B, TRACK SHOES 1

2RL, 5WG, 6MG, 8SF, 9PF, 9PK7.50" (190.5 mm) PITCH -- 20 mm BOLT






1 Also adaptable to MS240LC-8 and MS240-8 machines.

E240, EL240 TRACK SHOES 1

1FG, 2HF, 4JF, 4MF7.50" (190.5 mm) PITCH -- 20 mm BOLT



1 Also adaptable to MS240-8 and MS240LC-8 machines.

859


E240C/B, EL240C/B, E240, EL240 SPROCKETS 1



Bolt 14 6V-3532

Washer 14 085-9311


E240C/B, EL240C/B, E240, EL240 IDLERS 1


Components of Group



Shaft 1 093-1693





E240C/B, EL240C/B, E240, EL240 CARRIER ROLLERS 1


Group 4 096-5260

Components of Group

Roller Shell - - 2

Bushing 2 094-0563

Shaft 1 094-6386

Ring 1 095-0928




1 Also adaptable to MS240-8 and MS240LC-8 machines.2 Roller shell not serviced.

860


E240C/B, EL240C/B, E240, EL240 TRACK ROLLERS 1



Double Flange (DF) - 093-9275

Components of Group


Roller Shell (DF) - - 3

Bushing 2 093-1849

Shaft 1 094-1782




Plug 1 095-0967

Mounting Hardware 4

Bolt 4 093-0259

Washer 4 9X-8257

1 Also adaptable to MS240-8 and MS240LC-8 machines.2 16 rollers required for long undercarriage.3 Roller shell not serviced.4 These components are not included in the roller group; quantities shown are required to mount each roller.

E240C/B, EL240C/B, E240, EL240 TRACK GUIDING GUARDS 1

1FG, 2HF7.50" (190.5 mm) PITCH



Bolt 8 099-2668

Washer 8 095-0819


861

Excavators/Front ShovelsE300B, EL300B, E300, EL300

E300B, EL300B, EL300 TRACK 1

E300B (46 SECTION): 1WJ1-UPEL300B, EL300 (50 SECTION): 1GK1-UP, 3FJ1-UP, 4NF (EARLY MODELS), 4SF (EARLY MODELS)

8.00" (203.2 mm) PITCH -- 20 mm BOLT




Track Links

RH Master 099-6008 1 1

LH Master 099-5999 1 1

RH Regular 096-0264 45 49

LH Regular 096-0263 45 49

Other Components

Pin 096-0244 45 49

Master Pin 099-5554 1 1

Cotter Pin 095-0867 1 1

Bushing 099-5996 45 49



Spacer 096-0241 2 2

Track Hardware 2

Bolt 093-0265 184 200

Nut 093-0321 184 200

1 Also adaptable to MS300LC-8 Machines (50 Section link assembly)2 Not part of link assembly; required to assemble track group.

862


E300 TRACK 1

1KG, 2CF7.50" (190.5 mm) PITCH -- 20 mm BOLT

QUANTITY

FORMERUNSEALED

PART NUMBER

UNSEALEDPART

NUMBER

Link Assembly -- 49 Section 2 - 2 - 2


Track Links

RH Master 1 - -

LH Master 1 - 096-5259

RH Regular 48 093-1981 -

LH Regular 48 093-1980 -

Other Components

Pin 48 093-0502 093-0502

Master Pin 1 093-0522 093-0522

Bushing 48 095-7119 -

Master Bushing 1 095-7120 096-5256

Spacer 2 - 093-0043

Track Hardware 3

Bolt 196 093-0266 093-0266

Nut 196 093-0321 093-0321

1 Also adaptable to MS300LC-8 machines.2 Link Assembly no longer serviced.3 Not part of link assembly; required to assemble track group.

E300B, EL300B, EL300 TRACK SHOES 1

1GK, 1WJ, 3FJ, 4NF, 4SF8.00" (203.2 mm) PITCH -- 20 mm BOLT





1 Also adaptable to MS300LC-8 machines.

E300 TRACK SHOES 1

1KG, 2CF7.50" (190.5 mm) PITCH -- 20 mm BOLT





863


E300B, EL300B, EL300 SPROCKETS 1

8.00" (203.2 mm) PITCH



Bolt 16 6V-6788

Washer 16 8T-4123


E300 SPROCKETS 1

7.50" (190.5 mm) PITCH



Bolt 16 6V-6788

Washer 16 8T-4123


E300B, EL300B, EL300 IDLERS 1


Components of Group



Shaft 1 093-1694





E300 IDLERS 1


Components of Group



Shaft 1 093-1694





864


E300B, EL300B, EL300 CARRIER ROLLERS 1


Group 4 096-0330

Components of Group

Roller Shell - - 2

Bushing 2 094-0563







Group 4 096-5260

Components of Group

Roller Shell - - 2

Bushing 2 094-0563

Ring 1 095-0928





E300B, EL300B, EL300 TRACK ROLLERS 1



Components of Group


Bushing 2 093-1841

Ring 2 093-1736



Plug 1 095-0967

Mounting Hardware 3

Bolt 4 093-9886

Washer 4 099-7241

1 Also adaptable to MS300LC-8 machines.2 Roller shell not serviced3 These components are not included in the roller group; quantities shown are required to mount each roller.

865





Components of Group

Roller Shell (SF)2

Bushing 2 093-1841




Plug 1 095-0967

Mounting Hardware 3

Bolt 4 093-9886

Washer 4 099-7241

1 Also adaptable to MS300LC-8 machines.2 Roller shell not serviced3 These components are not included in the roller group; quantities shown are required to mount each roller.

E300B, EL300B, EL300 END GUIDING GUARDS 1



Bolt 8 093-0245

Washer 8 095-0820


866


E450 TRACK 1

3HG, 3JG8.50" (215.9 mm) PITCH -- 22 mm BOLT

QUANTITYUNSEALED

PART NUMBER

Link Assembly -- 50 Section 2 7I-9091


Track Links





Other Components

Pin 49 093-0510

Master Pin 1 093-0523 2


Bushing 49 093-1892


Spacer 2 093-0044

Track Hardware 3

Bolt 200 093-0268

Nut 200 096-0586

1 Also adaptable to MS450-8 machines.2 Serviced replaced by 7I-9087 Pin and 7I-9134 Bar.3 Not part of link assembly; required to assemble track group.

E450 TRACK SHOES 1

8.50" (215.9 mm) PITCH -- 22 mm BOLT



1 Also adaptable to MS450-8 machines.

E450 SPROCKETS 1



Bolt 24 096-7011

Washer 24 6V-8237

1 Also adaptable to MS450-8 machines.

867


E450 IDLERS 1


Components of Group


Bushing Assembly 2 -

Shaft 1 -

Bearing Block 2 -



1 Also adaptable to MS450-8 machines.2 Idler no longer serviced.



Group 6 - 2

Components of Group

Roller Shell - - 2

Bushing 2 -

Shaft 1 -

Ring 1 -


Seal -- Cover 1 095-1674

Seal -- Shaft O-Ring 1 -

1 Also adaptable to MS450-8 machines.2 Group and Roller Shell no longer serviced.

868





Components of Group


Bushing 2 -

Shaft 1 -

End Collar 2 -



Plug 1 095-0967

Mounting Hardware 3

Bolt 4 093-0233

Washer 4 093-0394

1 Also adaptable to MS450-8 machines.2 Roller shell not serviced.3 These components are not included in the roller group; quantities shown are required to mount each roller.

869


E650 TRACK 1

3KG, 3LG9.00" (228.6 mm) PITCH -- 24 mm BOLT

QUANTITYUNSEALED

PART NUMBER



Track Links




LH Regular 49 -

Other Components

Pin 49 -



Bushing 49 093-1894


Spacer 2 093-0045

Track Hardware 3

Bolt 200 093-0271

Nut 200 093-0323

1 Also adaptable to MS650-8 machines.2 Link Assembly no longer serviced.3 Not part of link assembly; required to assemble track group.

E650 SPROCKETS 1


Sprocket Assembly 1 - 2

Bolt 27 8T-0375

Washer 27 3B-4516

1 Also adaptable to MS650-8 machines.2 Sprocket no longer serviced.

870


E650 IDLERS 1


Components of Group

Idler Assembly 1 - 2

Roller Shell 2 -

Bushing 1 -

Shaft 2 -

Seal -- Duo-Cone Group 2 -


1 Also adaptable to MS650-8 machines.2 Idler no longer serviced.



Group 6 - 2

Components of Group

Roller Shell - - 2

Bushing 2 -

Shaft 1 -


Seal -- Cover 1 095-1674

Seal -- Shaft O-Ring 1 -

1 Also adaptable to MS650-8 machines.2 Group and Roller Shell no longer serviced.

871




Single Flange (SF) 14 - 2

Components of Group


Bushing 2 096-0251

Shaft 1 -- 3


Ring 2 099-5200



Plug 1 176-8618

Mounting Hardware 4

Bolt 4 094-4829

Washer 4 3P-3419

1 Also adaptable to MS650-8 machines.2 Group and Roller Shell no longer serviced.3 Shaft not serviced.4 These components are not included in the roller group; quantities shown are required to mount each roller.

873

TimberkingINDEX

TimberkingMODELS PAGE NO.

511, TK711 874..............................................................................................................521, 522, TK721, TK722, TK741 879.............................................................................532, 541, TK732 883......................................................................................................551, 552, TK751, TK752 886.........................................................................................

874

Timberking511, TK711

511, TK711 GREASE TRACK51100001-UP, 10100249-UP

8.00" (203.2 mm) PITCH 20 mm BOLT

QUANTITYPART

NUMBER


Track Links



Other Components

Pin 45 261-1013


Bushing 45 261-1015



Master Seal Assembly (Rigid) 2 261-1022


Master Thrust Ring 2 261-1018

Track Hardware 1

Bolt 184 306-2148

Nut 184 9W-3361


875


TK711 GREASE TRACK10100001-00248

7.50" (190.5 mm) PITCH 3/4" BOLT

QUANTITYPART

NUMBER


Track Links







Other Components

Pin 50 206-1470

Bushing 50 106-1618



Track Hardware 1

Bolt 196 6V-1792

Nut 196 1S-1860




511, TK711 TRACK SHOES8.00" (203.2 mm) PITCH - 20 mm BOLT


Extreme Service (Trapezoidal Opening) (Clip Grouser) 23.6" (600 mm) 6I-9854



Triple Grouser (Center Punched Shoes) 35.4" (900 mm) 6I-8651

Triple Grouser (Center Punched Shoes) (Tri) (RH) 35.4" (900 mm) 290-2269

Triple Grouser (Center Punched Shoes) (Tri) (LH) 35.4" (900 mm) 290-2270

TK711 TRACK SHOES7.50" (190.5 mm) PITCH - 3/4" BOLT

TYPE WIDTH

REGULARSHOE PART

NUMBER

MASTERSHOE PART

NUMBER

Extreme Service (Tapezoidal Opening) (Clip Grouser) 24.0" (610 mm) 207-4873 207-4874



Triple Grouser (Heavy Duty Center Punched Slots) 35.4" (900 mm) 206-1476 206-1477

876


511, TK711 SPROCKETS8.00" (203.2 mm) PITCH


NUMBER

Sprocket Rim (21 Tooth) 1 6Y-4898

Bolt 18 8T-6430

TK711 SPROCKETS7.50" (190.5 mm) PITCH


NUMBER


Bolt 18 8T-6430

511, TK711 IDLERS8.00" (203.2 mm) PITCH


NUMBER

Group 2 115-3696

Components of Group


Bearing 1 2 6Y-2272

Shaft 1 112-9951

Bearing Blocks 2 115-3697

Pin 2 6Y-2266



Seal -- Shaft-O-Ring 2 8F-8882

Stopper 1 9G-5664

Plug 1 7H-3171


877


TK711 IDLERS7.50" (190.5 mm) PITCH


NUMBER

Group 2 115-3696

Components of Group


Bearing 1 2 6Y-2272

Shaft 1 112-9951


Pin 2 6Y-2266




Stopper 1 9G-5664

Plug 1 7H-3171


511, TK711 CARRIER ROLLERS8.00" (203.3 mm) PITCH


NUMBER

Roller Group (Star Design) 6 228-6404

Roller Group (SF) 1 1 206-1264

Roller Group (SF) (Circular Design) 1 6 206-1264

Mounting Hardware (For Both Designs) 2

Bolt 4 7X-2565

Washer 4 8T-4123

1 Refer to track roller table for component breakdown.2 Not part of roller group, quantities shown are required to mount each roller group.

TK711 CARRIER ROLLERS7.50" (190.5 mm) PITCH


NUMBER



Roller Group (SF) (Circular Design) 1 6 197-4161

Mounting Hardware (For Both Designs) 2

Bolt 4 7X-2565

Washer 4 8T-4123


878


511, TK711 TRACK ROLLERS8.00" (203.2 mm) PITCH


NUMBER

Single Flange (SF) Roller Group 4 206-1264 1


Components of Group



Bushing 2 6Y-1782

Shaft 1 206-9260


Pin 2 159-9526

Seal -- Duo-Cone Group (Symmetrical) 2 206-9212

Toric Ring 2 2 171-5713


Plug 1 9W-2146

Mounting Hardware 3

Bolt 4 7X-2565

Washer 4 8T-4123

1 Position next to idler and sprocket (front and rear position).2 Component of preceding assembly or group, quantity shown is quantity per assembly or group.3 These components are not included in the roller group; quantities shown are required to mount each roller.

TK711 TRACK ROLLERS7.50" (190.5 mm) PITCH


NUMBER


Components of Group


Bearing 1 2 6I-9399

Shaft 1 200-6432


Pin 2 159-9526


Toric Ring 1 2 171-5713


Plug 1 9W-2146

Mounting Hardware 2

Bolt 4 7X-2565

Washer 4 8T-4123

1 Component of preceding assembly or group, quantity shown is quantity per assembly or group.2 These components are not included in the roller group; quantities shown are required to mount each roller.

879

Timberking521, 522, TK721, TK722, TK741

521, 522, TK721, TK722, TK741 GREASE TRACKONE PIECE MASTER LINKS

521, 52100001-UP; 522, 52200001-UP; TK721, 10200352-UP; TK722, 10300453-UP; TK741, 20200229-UP8.00" (203.3 mm)PITCH - 3/4" BOLT

QUANTITYPART

NUMBER



Track Links

RH Master (Full) 1 266-7271

LH Master (Full) 1 266-7272



Other Components

Pin 48 198-1125


Bushing 48 8E-7222



Seal Assembly - Master (Rigid) 2 269-7103



Track Hardware 1

Bolt 196 6V-1792

Nut 196 1S-1860


880


TK721, TK722, TK741 GREASE TRACKSPLIT MASTER LINKS

TK721, 10200001-10200351; TK722, 10300001-10300452; TK741, 20200001-202002288.00" (203.3 mm)PITCH - 3/4" BOLT

QUANTITYPART

NUMBER



Track Links







Other Components

Pin 49 198-1125

Bushing 49 8E-7222



Track Hardware 1

Bolt 192 6V-1792

Nut 192 1S-1860



521, 522, TK721, TK722, TK741 TRACK SHOES8.00" (203.3 mm) PITCH 3/4" BOLT

TYPE WIDTH

REGULARSHOE PART

NUMBER



Double Grouser (Trapezoidal Opening) 24.0" (610mm) 150-7865


Triple Grouser (Heavy Duty) (Center Punched Shoes) (Tri) (RH) 35.4" (900 mm) 287-8269

Triple Grouser (Heavy Duty) (Center Punched Shoes) (Tri) (LH) 35.4" (900 mm) 287-8270

881


TK721, TK722, TK741 TRACK SHOES8.00" (203.2 mm) PITCH - 3/4" BOLT

TYPE WIDTH

REGULARSHOE PART

NUMBER

MASTERSHOE PART

NUMBER



Double Grouser (Trapezoidal Opening) 24.0" (610mm) 150-7865 150-7866


Triple Grouser (Heavy Duty) (Center Punched Slots) 35.4" (900 mm) 200-4274 200-4275 1

1 Double grouser shoe with trapezoidal opening.

521, 522, TK721, TK722, TK741 SPROCKETS


NUMBER


Bolt 16 7X-2575

521, 522, TK721, TK722, TK741 IDLERS


NUMBER


Components of Group


Bearing 1 2 6Y-2272

Shaft 1 112-9951


Pin 2 6Y-2266




Stopper 1 9G-5664

Plug 1 7H-3171


882


521, 522, TK721, TK722, TK741 CARRIER ROLLERS


NUMBER



Mounting Hardware 2

Bolt 4 7X-2565

Washer 4 8T-4123


521, 522, TK721, TK722, TK741 TRACK ROLLERS


NUMBER

Single Flange (SF) Roller Group 2 206-1264 1


Components of Group



Bushing 2 6Y-1782

Shaft 1 206-9260


Pin 2 159-9526


Toric Ring 2 2 171-5713


Plug 1 9W-2146

Mounting Hardware 3

Bolt 4 7X-2565

Washer 4 8T-4123

1 Position next to idler (front position).2 Component of preceding assembly or group, quantity shown is quantity per assembly or group.3 These components are not included in the roller group; quantities shown are required to mount each roller.

522, TK722 TRACK ROLLER GUARDS (FULL LENGTH)


NUMBER


Spacer 16 152-8555

Bolt (24 mm) (340 mm length) 16 127-4834

Nut 48 8T-4001

Bolt (24 mm) (70 mm length) 32 7X-2576

Washer 96 8T-4167

883

Timberking532, 541, TK732

532, 541, TK732 GREASE TRACK532, 53200001-UP; 541, 54100001-UP; TK732, 10400001-UP

8.50" (215.9 mm) PITCH - 22 mm BOLT

QUANTITYPART

NUMBER


Track Links



Other Components

Pin 46 6Y-2751


Bushing 46 321-1463


Seal (Poly W) 92 179-3426

Master Seal (Poly W) 2 179-3428

Track Hardware 1

Bolt 188 143-4891

Nut 188 9W-4381


532, 541, TK732 TRACK SHOES8.50" (215.9 mm)PITCH - 22 mm BOLT


Extreme Service (Trapezoidal Opening) (Clip Grouser) 23.6" (600 mm) 6I-9893

Extreme Service (Trapezoidal Opening) (Clip Grouser) 27.6" (700 mm) 152-8558

Double Grouser (Trapezoidal Opening) (Clip Grouser) 27.6" (700 mm) 196-4083

532, 541, TK732 SPROCKETS


NUMBER

Sprocket Rim (23 Tooth) 1 6Y-5685

Bolt 16 7X-2575

884


532, 541, TK732 IDLERS


NUMBER


Components of Group


Bearing 1 2 6Y-8023

Shaft 1 6Y-8028

Bearing Blocks 2 7Y-1248

Pin 2 6Y-8029



Seal - Shaft O- Ring 2 1H-7339

Plug 1 7H-3171


532, 541, TK732 CARRIER ROLLERSSTAR DESIGN


NUMBER


Roller Group 1 183-2874

Components of Group


Bearing 1 2 6Y-2792

Shaft 1 183-2883


Pin 2 179-1499


Toric Ring 1 2 160-6631

Seal - Shaft O- Ring 2 8F-8882

Plug 1 9W-2146


885


532, 541, TK732 TRACK ROLLERS


NUMBER


Components of Group


Bearing 1 2 6Y-2792

Shaft 1 183-2883


Pin 2 179-1499


Toric Ring 1 2 160-6631


Plug 1 9W-2146

Mounting Hardware 2

Bolt 4 7X-2454

Washer 4 8T-4167

1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 Not part of roller group, quantities shown are required to mount each roller group.

532, 541, TK732 TRACK ROLLER GUARDS (FULL LENGTH)


NUMBER


Spacer 16 152-8555

Bolt (24 mm) (340 mm length) 16 127-4834

Nut 48 8T-4001


Washer 96 8T-4167

886

Timberking551, 552, TK751, TK752

551, 552, TK751, TK752 GREASE TRACK551, 55100001-UP; 552, 52200001-UP; TK751, 30100001-UP; TK752, 30200001-UP

8.50" (215.9 mm) PITCH - 24 mm BOLT

QUANTITYPART

NUMBER


Track Links



Other Components

Pin 46 8E-4272


Bushing 46 227-3029



Master Seal Assembly (Rigid) 2 251-7757


Master Thrust Ring 2 251-8364

Stopper 1 7G-4332

Plug 1 6Y-0473

Track Hardware 1

Bolt 188 150-4741 2

Nut 188 311-8150

1 Not part of link assembly; required to assemble track group.2 Serviced Replaced By: 318-2558.

551, 552, TK751, TK752 TRACK SHOES8.50" (215.9 mm) PITCH - 24 mm BOLT




551, 552, TK751, TK752 SPROCKETS


NUMBER


Bolt 16 7X-2575

887


551, 552, TK751, TK752 IDLERS


NUMBER


Components of Group


Bearing 1 2 6Y-8023

Shaft 1 6Y-8028

Bearing Blocks 2 7Y-1248

Pin 2 6Y-8029



Seal - Shaft O- Ring 2 1H-7339

Plug 1 7H-3171


551, 552, TK751, TK752 CARRIER ROLLERSSTAR DESIGN


NUMBER



Components of Group


Bearing 1 2 6Y-2792

Shaft 1 183-2883


Pin 2 179-1499


Toric Ring 1 2 160-6631


Plug 1 9W-2146


888


551, 552, TK751, TK752 TRACK ROLLERS


NUMBER


Components of Group


Bearing 1 2 6Y-2792

Shaft 1 183-2883


Pin 2 179-1499


Toric Ring 1 2 160-6631


Plug 1 9W-2146

Mounting Hardware 2

Bolt 4 7X-2454

Washer 4 8T-4167

1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 Not part of roller group, quantities shown are required to mount each roller group.

551, 552, TK751, TK752 TRACK ROLLERS GUARDS (FULL LENGTH)


NUMBER


Spacer 16 152-8555

Bolt (24 mm) (340 mm length) 16 127-4834

Nut 48 8T-4001


Washer 96 8T-4167

889

Mini Hydraulic ExcavatorsINDEX

Mini Hydraulic ExcavatorsMODELS PAGE NO.

301.8C, 301.6C, 301.8, 301.6, 301.5 890.......................................................................303.5CCR, 303CCR, 302.5C, 303CR, 303.5, 302.5 892.................................................304CCR, 305CCR, 304CR, 305CR, 304.5, 305.5 900...................................................

890

Mini Hydraulic Excavators301.8C, 301.6C, 301.8, 301.6, 301.5

301.8C, 301.6C BELTSJBB, JSB

(PER MACHINE) QUANTITY WIDTHPART

NUMBER

Belt - Rubber 2 9.1" (231.5 mm) 231-1911

301.8, 301.6, BELTSBDH, BFA


NUMBER

Belt - Rubber 2 9.1" (231.5 mm) 234-9369

301.5 BELTS3YW


NUMBER

Belt - Rubber 2 9.1" (231.5 mm) 234-9368

301.8C, 301.6C, 301.8, 301.6, 301.5 SPROCKETS



Bolt (10 mm) 9 105-3484

301.8C, 301.6C, 301.8, 301.6, 301.5 IDLERS



Components of Idler Assembly

Idler 1 226-4050

Shaft 1 139-6270

Ring - Retaining 2 6V-7644

Bearing- Ball 2 1B-3867

Seal 2 139-6364

Ring - Retaining 2 8T-9598

891

Mini Hydraulic Excavators301.8C, 301.6C, 301.8, 301.6, 301.5

301.8C, 301.6C ROLLERS


Roller Assembly (Ends) (Includes Shaft) 6 232-4466

Mounting Hardware 1

Bolt (12 mm) 2 8T-4139

Washer 2 8T-4223

1 These components are not included in the roller assembly; quantities shown are required to mount each roller.

301.8, 301.6, 301.5 ROLLERS


Roller Assembly (Ends) (Includes Shaft) 4 232-4466

Roller Assembly (Middle) (Includes Shaft) 2 139-6261

Components of Roller Assembly 139-6261

Bearing- Ball 2 096-9296

Ring - Retaining 2 7Y-5267

Plug 1 085-8893

Mounting Hardware 1

Bolt (12 mm) 2 8T-4192

Washer 2 8T-4223


892

Mini Hydraulic Excavators303.5CCR, 303CCR, 302.5C, 303CR, 303.5, 302.5

303CCR BELTSBXT


NUMBER

Belt - Rubber 2 11.8" (300 mm) 263-9250

303CR BELTSCAR, DMA


NUMBER

Belt - Rubber 2 11.8" (300 mm) 233-2048

303.5CCR BELTSDMY


NUMBER

Belt - Rubber 2 11.8" (300 mm) 263-9262

303.5 BELTSAFW, DCH


NUMBER

Belt - Rubber 2 11.8" (300 mm) 153-5982

302.5C BELTSGBB


NUMBER

Belt - Rubber 2 11.9" (302.5 mm) 231-1910

302.5 BELTS4AZ


NUMBER

Belt - Rubber 2 11.8" (300 mm) 146-6062

893


303.5CCR, 303CCR STEEL TRACKDMY, BXT

4.00" (101.6 MM) PITCH


Track Assembly - 46 Section 2 263-9252

Components of Track Assembly

Link Assembly 1 263-9253





Pin 45 158-4681


Bushing 45 158-4680


Cotter 1 158-4683

Double Grouser Track Shoe 12.0" (300 mm) 1 46 158-4684

Rubber Track Pad Offerings and Mounting Hardware (Mounts to Double Grouser Shoe)

Rubber Pad (300 mm) (With 2 Mounting Studs) 46 184-2184

Nut (12 mm) 92 6V-8149

Washer 92 163-7094

Rubber Pad (300 mm) (With 1 Mounting Bolt and Side Clip) 46 212-5118

Bolt (12 mm) 46 212-5119

Washer 46 212-5120

1 Shoes welded to the link assembly.

894


303CR, 303.5 STEEL TRACKCAR, DMA, AFW, DCH

4.00" (101.6 mm) PITCH









Pin 42 158-4681


Bushing 42 158-4680


Cotter 1 158-4683



302.5C, 302.5 STEEL TRACK4AZ, GBB









Pin 39 158-4681


Bushing 39 158-4680


Cotter 1 158-4683



895


303CR SPROCKETS



Bolt (12 mm) 9 8T-4956

Washer 9 8T-4223

303.5CCR, 303CCR SPROCKET



Bolt (12 mm) 11 8T-4139

Washer 11 8T-4223

303.5 SPROCKETS



Bolt (12 mm) 9 8T-4956

Washer 9 8T-4223

302.5C, 302.5 SPROCKETS



Bolt (12 mm) (Model 302.5) 9 101-7402

Bolt (12 mm) (Model 302.5C) 9 6V-8200

303.5CCR, 303CCR, IDLERS



Shaft 2 267-4831


Seal --Shaft O-Ring 4 095-1595

896


303CR, 303.5 IDLERS


NUMBER



Shaft 1 146-0984


Ring - Retaining 2 2W-1145

Seal - Oil 2 146-0985

302.5C IDLERS


Idler Group 2 - 1

Other Components


Shaft 1 234-8967



1 Order Idler Group (RH) 234-6204, or Idler Group (LH) 234-6203. Both of these idler groups contains, idler assembly, idler shaft, cylinderassembly, rod assembly, spring, and supports.

302.5 IDLERS




Shaft 1 140-4008



Seal 2 139-6364

303.5CCR, 303CCR, CARRIER ROLLERS


Carrier Roller Group (Includes Shaft) 2 266-8794

Mounting Hardware 1

Bolt (16 mm) 1 8T-4173

Washer 2 7X-0515

Nut 2 8T-4132


897


303CR CARRIER ROLLERS


NUMBER

Carrier Roller Assembly (Includes Shaft) 2 193-7070

Components of Assembly




Cap Assembly 1 172-1769

Mounting Hardware 1

Bolt (10 mm) 1 8T-4178

Washer 2 8T-4121

Nut 2 8T-4133


302.5C, 303.5, 302.5 CARRIER ROLLERS







Seal - Oil 1 140-4338

Mounting Hardware 1

Bolt (10 mm) (For models 303.5, 302.5) 1 8T-4178

Washer (For models 303.5, 302.5) 2 8T-4121

Nut (For models 303.5, 302.5) 2 8T-4133

Bolt (10 mm) (For model 302.5C) 1 8T-4172

Nut (For model 302.5C) 1 096-4883


898


302.5C ROLLERS



Components of Group



Collar 1 234-8958


Seal - Shaft O-ring 1 095-1657

Ring - Retaining 1 234-8962

Plug 1 9F-2247

Mounting Hardware 1

Bolt (16 mm) 2 7X-2553

Washer 2 7X-0515


303.5CCR, 303CCR ROLLERS


Roller Assembly (Center Flange) (Includes Shaft) 8 266-8793

Mounting Hardware 1

Bolt (16 mm) 16 8T-7338

Washer 16 7X-0515


303CR, 303.5, 302.5 ROLLERS


NUMBER

Roller Assembly (Center Flange) (Includes Shaft) - 1 185-7280




Seal - Oil 2 140-4338


Plug 1 085-8893

Mounting Hardware 2

Bolt (10 mm) 4 8T-4182

Washer 4 8T-4121

1 8 Roller Groups on 303CR and 303.5, 6 Roller Groups on 302.5.2 These components are not included in the roller assembly; quantities shown are required to mount each roller.

899


303.5CCR, 303CCR GUIDING GUARDSFOR USE WITH STEEL TRACK


Guard Assembly - RH 2 263-9268

Guard Assembly - LH 2 263-9267

Bolt (12 mm) 12 8T-4956

Washer 12 8T-4223

303CR, 303.5 GUIDING GUARDSFOR USE WITH STEEL TRACK




Bolt (12 mm) 12 8T-4192

Washer 12 8T-4223

302.5C GUIDING GUARDSFOR USE WITH STEEL TRACK




Washer 12 7X-0578

Nut 12 096-4883

302.5 GUIDING GUARDSFOR USE WITH STEEL TRACK




Bolt (12 mm) 12 8T-4139

Washer 12 8T-4223

900

Mini Hydraulic Excavators304CCR, 305CCR, 304CR, 305CR, 304.5, 305.5

304CCR, 305CCR BELTSFPK, HWJ


NUMBER

Belt - Rubber 2 15.7" (400 mm) 263-9237 1


304CR, 305CR BELTSBTN, NAD, DSA, DMW


NUMBER

Belt - Rubber 2 15.7" (400 mm) 238-3231

304.5, 305.5 BELTSANR, WAK


NUMBER

Belt - Rubber 2 15.7" (400 mm) 153-5981

304CCR, 305CCR TRACK STEELFPK, HWJ

5.31" (135 mm) PITCH - 12 mm BOLT



Track Links





Other Components

Pin 39 158-4772


Bushing 40 158-4771

Cotter 1 158-4774

Track Hardware 1

Bolt (12 mm) 160 158-4775

Nut 160 158-4776


901


304CR, 305CR, 304.5, 305.5 STEEL TRACKBTN, NAD, DSA, DMW, ANR, WAK, CXZ, DCK

5.31" (135 mm) PITCH - 12 mm BOLT


Track Group - 38 Section 2 155-6844

Components of Track Group






Pin 37 158-4772


Bushing 38 158-4771

Cotter 1 158-4774

Triple Grouser Track Shoe 16.0" (400 mm) (4 extra holes to mount rubber pads) 38 158-4777

Bolt (12 mm) 152 158-4775

Nut 152 158-4776

Rubber Track Pad Offerings and Mounting Hardware (Mounts to Triple Grouser Shoe)

Rubber Pad (400 mm) (With 4 Mounting Studs) 38 163-7093

Washer 152 163-7094

Nut (12 mm) 152 139-6411

Rubber Pad (400 mm) (With 2 Mounting Bolts and Side Clip) 38 212-5129

Bolt (12 mm) 152 212-5119

Washer 152 212-5120

304CCR, 305CCR TRACK SHOES5.31" (135 MM) PITCH - 12 mm BOLT



Rubber Pad (With 4 Mounting Studs) 1 15.7" (400 mm) 163-7093

Washer - 163-7094

Nut (12 mm) - 6V-8149

Rubber Pad (400 mm) (With 2 Mounting Bolts and Side Clip) 1 15.7" (400 mm) 212-5129

Bolt (12 mm) - 212-5119

Washer - 212-5120

1 Pad bolts to triple grouser shoe.

902


305CCR SPROCKETS



Bolt (14 mm) 12 085-9768

Washer 12 7X-0510

304CCR, 304CR, 305CR, 304.5, 305.5 SPROCKETS



Bolt (14 mm) 9 085-9768

Washer 9 7X-0510

304CCR, 305CCR IDLERS



Shaft 2 267-4817



305CR, 304.5, 305.5 IDLERS




Idler 1 240-6306

Shaft 1 240-6305



Seal - Oil 2 120-4660

903


304CR IDLERS




Idler 1 241-5973

Shaft 1 241-5976



Seal - Oil 2 120-4660

304CCR, 305CCR CARRIER ROLLERS


Carrier Roller Group (Includes Shaft) 2 265-7675

Mounting Hardware 1

Bolt (16 mm) 1 8T-4173

Washer 2 7X-0515

Nut 2 8T-4132


304CR, 305CR, 304.5, 305.5 CARRIER ROLLER GROUPCURRENT DESIGN


Group 2 277-8576

Components of Group


Bearing 1 2 099-6461


Retainer 1 099-6462

Cover 1 102-8079

Bolt 5 6V-8202



Plug 1 7H-3171

Mounting Hardware 2

Setscrew 1 095-1279

1 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 Not included in roller group; quanitity shown is requried to mount each roller.

904


304CR, 305CR, 304.5, 305.5 CARRIER ROLLERSFORMER DESIGN



Mounting Hardware 1

Bolt (16 mm) 1 7X-2556

Washer 2 9X-8257

Nut 2 8T-4132


304CCR, 305CCR ROLLERS


Roller Group (Center Flange) (Includes Shaft) 10 265-7674

Mounting Hardware 1

Bolt (16 mm) 2 8T-4140

Washer 2 7X-0515


304CR, 305CR, 304.5 ROLLERS


Roller Assembly (Center Flange) (Includes Shaft) - 1 340-8957


Bushing 2 158-4714


Seal - Shaft O-Ring 2 158-4713


Plug 1 3D-4603

Mounting Hardware 2

Bolt (10 mm) 4 8T-4182

Washer 4 8T-4121

1 8 Roller Groups on 304CR, 10 Roller Groups on 305CR and 304.5.2 These components are not included in the roller assembly; quantities shown are required to mount each roller.

905


304CCR, 305CCR GUIDING GUARDSFOR USE WITH STEEL TRACK




Bolt (12 mm) 12 8T-4183

Washer 12 8T-4223

304CR, 305CR, 305.5 GUIDING GUARDSFOR USE WITH STEEL TRACK




Bolt (12 mm) 12 8T-4139

Washer 12 8T-4223

304.5 GUIDING GUARDSFOR USE WITH STEEL TRACK




Bolt (12 mm) 12 8T-4139

Washer 12 8T-4223

907

Multi-Terrain Loaders, Compact Track LoadersINDEX

Multi-Terrain Loaders, Compact Track LoadersMODELS PAGE NO.

257B2, 247B2, 257B, 247B, 257, 247 908.....................................................................277C, 287C, 297C 915...................................................................................................277B, 267B, 277, 267 919..............................................................................................287B, 287 926................................................................................................................279C, 289C, 299C 931...................................................................................................

908

Multi-Terrain Loaders, Compact Track Loaders257B2, 247B2, 257B, 247B, 257, 247

257B2, 247B2, 257B, 247B, 257, 247 BELTSSLK, MTL, CMM, CML


NUMBER

Belt - Rubber 2 15.0" (380 mm) 325-8624

Belt - Rubber (Smooth) 2 15.0" (380 mm) 278-1215

257B2, 247B2 SPROCKET ASSEMBLYMTL5075-UP, SLK7300-UP


NUMBER

Sprocket 1 305-9285

Ring 1 258-3087

Sleeve - Outer 12 210-4646

Sleeve - Inner 12 210-4645

Bolt (1/2") 12 280-5091

Washer 12 7X-3392

Locknut 12 1K-6872

257B, 247B, 257, 247 SPROCKET ASSEMBLYMTL1-5074, SLK1-7299, CMM, CLM


NUMBER

Sprocket 1 234-0742

Ring 1 210-4647 1



Bolt (1/2") 12 1A-0168

Locknut 12 9X-0941

1 Service replace by: (1)- 258-3087 Ring, (12)- 8T-4223 Bolts, (12)- 280-5091 Lock Nuts, (12)- 1K-6872 Washers

909


257B2, 247B2 WHEEL GP - IDLER (FRONT)MTL5075-UP, SLK7300-UP


NUMBER

Wheel Gp - Idler (Front) 4 280-5030

Components of Group

Axle Group- Idler 1 280-5031

Sleeve 1 280-5025

Cup 2 3N-6411

Cone 2 3N-6412

Seal Group 1 280-5035

Housing 1 280-5026

Seal 1 280-5112

Plug 1 9F-2247

Wheel 1 278-1301

Bolt (1/2") 8 8C-4436

Washer 8 8T-7971

Mounting Hardware 1

Axle - Wheel 1 295-3295

Seal -O- Ring 2 280-5038

Washer 2 280-5074

Locknut 2 280-5075

Cap 2 295-3292

Retaining Ring 2 2R-1236

1 These components are not included in the idler group; quantities shown are required to mount each idler.

910


257B2, 247B2 WHEEL GP - IDLER (REAR)MTL5075-UP, SLK7300-UP


NUMBER

Wheel Gp - Idler (Rear) 4 295-3230 1

Components of Group

Axle Group- Bogie 1 295-3211

Sleeve 1 280-5025

Cup 2 3N-6411

Cone 2 3N-6412


Housing 1 280-5026

Seal 1 280-5112

Plug 1 9F-2247

Wheel 1 265-6385

Bolt (1/2") 8 8C-4436

Washer 8 8T-7971

Mounting Hardware 2

Axle - Wheel 1 295-3295

Seal -O- Ring 2 280-5038

Washer 2 280-5074

Locknut 2 280-5075

Cap 2 295-3292


1 Not serviced, serviced as separate parts.2 These components are not included in the idler group; quantities shown are required to mount each idler.

911


257B, 247B, 257, 247 WHEEL GP - IDLERMTL1-5074, SLK1-7299, CMM, CLM


NUMBER

Wheel Gp - Idler 4 223-8396

Components of Group

Wheel Assembly- Idler 1 223-8397

Cup 2 7T-9755

Cone 1 7T-9754


Seal 1 212-6681

Seal Retainer 1 216-6141

Seal -O-Ring 1 3P-0815

Retaining Ring 1 6V-1366


Mounting Hardware 1

Spacer 1 224-9409

Cone 1 7T-9754

Washer 1 216-6149

Locknut 1 212-6559

Cap 1 215-4006



912


257B2, 247B2 WHEEL GP - BOGIEMTL5075-UP, SLK7300-UP


NUMBER

Wheel Gp - Bogie 16 295-3210

Components of Group

Axle Group- Bogie 1 295-3211

Sleeve 1 280-5025

Cup 2 3N-6411

Cone 2 3N-6412


Housing 1 280-5026

Seal 1 280-5112

Plug 1 9F-2247

Wheel 1 278-1261

Bolt (1/2") 8 8C-4436

Washer 8 8T-7971

Mounting Hardware 1

Axle - Wheel 1 295-3295

Seal -O- Ring 2 280-5038

Washer 2 280-5074

Locknut 2 280-5075

Cap 2 295-3292


1 These components are not included in the bogie group; quantities shown are required to mount each bogie.

913


257B, 247B, 257, 247 WHEEL GP - BOGIE MIDDLEMTL1-5074, SLK1-7299, CMM, CLM


NUMBER

Wheel Gp - Bogie Middle 16 212-6628

Components of Group

Wheel Assembly- Bogie Middle 1 206-3812

Cup 2 3P-8680

Cone 1 3P-8681

Seal 1 212-6681

Spacer 1 215-3956


Mounting Hardware 1

Spacer 1 224-9407

Cone 1 3P-8681

Washer 1 216-6149

Locknut 1 212-6559

Cap 1 212-6682

Retaining Ring 1 2D-0592


257B, 247B, 257, 247 WHEEL GP - BOGIE ENDMTL1-5074, SLK1-7299, CMM, CLM


NUMBER

Wheel Gp - Bogie End 4 223-8398

Components of Group

Wheel Assembly- Bogie End 1 223-8399

Cup 2 7T-9755

Cone 1 7T-9754


Seal 1 212-6681

Seal Retainer 1 216-6141

Seal -O-Ring 1 3P-0815

Retaining Ring 1 6V-1366


Mounting Hardware 1

Spacer 1 224-9409

Cone 1 7T-9754

Washer 1 216-6149

Locknut 1 212-6559

Cap 1 215-4006



914


257B, 247B, 257, 247 "B2 SERIES" UPGRADE KITSKITS INCLUDE LEFT AND RIGHT B2 UNDERCARRAIGE FRAME ASSEMBLIES

MTL1-5074, SLK1-7299, CMM, CLM


NUMBER

Kit Option 1 1 1 305-9261

Kit Option 2 2 1 305-9262

1 Includes entire undercarriage set, rubber track, the planetary gear reduction motor (this eliminates the outboard bearing) and allhardware. For installation/assembly instructions, refer to Special Instructions Media No. REHS4021.2 Includes kit 1 minus the tracks, sprocket, drive motor, and drive table. Option 2 is for the lower hour machines where the drive motor isstill in good working conditon. Refer to Special Instruction Media No. REHS4023

915

Multi-Terrain Loaders, Compact Track Loaders277C, 287C, 297C

277C, 287C, 297C BELTSJWF, MAS, GCP


NUMBER

Belt - Rubber 2 18.0" (460 mm) 258-3050 1


277C, 287C, 297C SPROCKET ASSEMBLY


NUMBER

Sprocket 1 258-3085

Ring - Outer 1 258-3086

Ring - Middle 1 258-3084

Ring - Inner 1 258-3087



Bolt (1/2") 12 258-3122

Washer 12 8T-4223

Locknut 12 1K-6872

916


277C, 287C, 297C WHEEL GP - IDLER (Front & Rear)


NUMBER

Wheel Gp - Idler 4 327-7727

Components of Group

Axle Group - Idler 1 327-7724

Sleeve 1 258-3025

Seal 1 258-3112

Cone 2 2F-8509

Cup 2 002-1212

Housing 1 258-3026

Seal Gp 1 258-3035

Plug 1 9F-2247

Bogie Wheel -Inner 1 309-3296

Bogie Wheel - Outer 1 309-3297

Bolt (1/2") Wheels to Axle 12 8C-4436

Washer 12 8T-7971

Mounting Hardware, Front Idler Wheel Groups to Track Roller Frame 1

Wheel Axle Assembly 1 309-3295

Seal-O-Ring 2 5K-0227

Washer 1 068-6405

Locknut 1 258-3075

Cap 2 258-3092

Retainer Ring 2 6V-5590

Mounting Hardware, Rear Idler Wheel Groups to Track Roller Frame 1

Idler Axle (Rear) 1 258-3064


Washer 2 068-6405

Locknut 2 258-3075

Cap 2 258-3092

Retainer Ring 2 6V-5590

1 These components are not included in the idler wheel group; quantities shown are required to mount each idler wheel.

917


277C, 287C, 297C WHEEL GP - BOGIESingle Level Suspension


NUMBER


Components of Group

Axle Group - Bogie 1 258-3021

Sleeve 1 258-3025

Seal 1 258-3112

Cone 2 2F-8509

Cup 2 002-1212

Housing 1 258-3026

Seal Gp 1 258-3035

Plug 1 9F-2247

Bogie Wheel -Inner 1 309-3298

Bogie Wheel - Outer 1 309-3299

Bolt (3/8") Wheels to Axle 12 258-3028

Washer 12 8T-4896

Mounting Hardware, Bogie Wheel Group to Track Roller Frame 1

Wheel Axle Assembly 1 258-3065


Washer 1 258-3074

Locknut 1 258-3075

Cap 2 258-3092

Ring Retainer 2 6V-5590

Scrapers and Hardware to Bolt to Track Roller Frame

Scraper Assembly (positioned between bogie wheels 2 & 3 and 4 & 5) 2 258-3118

Bolt (3/8") 2 258-3103

Nut 2 235-1088

Scraper (Long) (positioned between front idler wheel and first bogie wheel) 2 258-3116

Scraper (Short) (positioned between front idler wheel and first bogie wheel) 2 258-3117

Bolt (3/8") 4 1D-4704

Nut 4 235-1088

1 These components are not included in the bogie wheel group; quantities shown are required to mount each bogie wheel.

918


277C, 287C, 297C WHEEL GP - BOGIEDual Level Suspension


NUMBER

Components of Suspension Group (Dual Level)

Gp - Bogie 8 258-3041 1

Bolt (1/2") (Bogie Gp To Bogie Gp) 16 8T-8919

Washer 32 7X-3392

Nut 16 6V-8188

Bogie Wheel 16 309-3298

Bolt (3/8") Wheels to Bogie Gp 96 8T-2502

Washer 96 8T-4896

Spacer (Between Bogie Group and Frame) 4 258-3016

Rubber Cord 16 258-3047

Cover Plate 4 258-3017

Bolt (3/8") (Bogie Group to Frame) 8 4L-9337

Washer 8 8T-4896

Scraper (Front Idler) 2 258-3116

Bolt (3/8") Scraper to Frame 4 1B-2706

Nut 4 235-1088

1 Serviced Replaced by: 320-8514.

919

Multi-Terrain Loaders, Compact Track Loaders277B, 267B, 277, 267

277B, 267B, 277, 267 BELTSMDH, CYC, CNC, CMP


NUMBER

Belt - Rubber 2 18.0" (460 mm) 238-7664

Belt - Rubber (Outside Guide Lugs) 2 20.0" (508 mm) 278-1219

277B, 267B, 277, 267 SPROCKET ASSEMBLY


NUMBER

Sprocket 1 261-6151

Ring 2 200-0996



Bolt (1/2") 12 8S-6212

Locknut 12 1K-6872

277B, 267B, 277, 267 "SERIES 2" SPROCKET BEARING GROUP


NUMBER

Bearing Group - Sprocket 2 278-1240

Components of Group

Flange Group 1 278-1264

Seal 1 278-1265

Retainer 1 278-1266

Bearing - Ball 1 4B-3665

Ring - Retaining 1 8J-7636

920


277B, 267B, 277, 267 "SERIES 2" WHEEL GP - BOGIE


NUMBER


Components of Group



Outer Sleeve 2 278-1310

Plug 1 108-2187

Bogie Wheel (Middle) 1 238-7729

Bogie Wheel - (Outer) 2 238-7728

Plate 2 261-6112

Bolt (3/8") 24 228-8403

Lockwasher 24 113-0693

Locknut 24 2K-4973

Mounting Hardware, Wheel Group to Pivot Assembly (Carriage Assembly) 1

Pivot Assembly (Mounts 2 Wheel Groups) 1 199-5370

Plate 2 204-1371

Bolt (3/8") 4 4L-6454


Mounting Hardware Carriage Assemblies to Frame Assembly 2

Bolt (1/2") Rear 4 241-1855

Bolt (1/2") Middle and Front 8 8T-8919

Lockwasher 12 3B-4508

Locknut 12 9X-0941

1 These components are not included in the bogie wheel group; quantities shown are required to mount each bogie.2 These components are not included in bogie wheel group; quantities shown are required to mount 3 carriage assemblies.

921


277B, 267B, 277, 267 WHEEL GP - BOGIE


NUMBER


Components of Group


Tube Assembly - Bogie 1 199-5432

Axle Shaft - Bogie 1 204-1375

Bearing 2 199-9929

Seal 2 199-9928

Plug 1 108-2187


Bogie Wheel - Center 1 199-5429

Plate 2 200-0809

Bolt (3/8") Outer Bogey Wheels 16 1B-2706

Bolt (3/8") Center Bogey Wheel 8 228-8403


Locknut 24 3K-6060

Mounting Hardware, Wheel Group to Pivot Assembly (Carriage Assembly) 1

Pivot Assembly (Mounts 2 Wheel Groups) 1 199-5370

Plate 2 204-1371

Bolt (3/8") 4 4L-6454


Mounting Hardware Carriage Assemblies to Frame Assembly 2

Bolt (1/2") Rear 4 1A-1460

Bolt (1/2") Middle and Front 8 8T-8919


Locknut 12 9X-0941

1 These components are not included in the bogie wheel group; quantities shown are required to mount each bogie.2 These components are not included in bogie wheel group; quantities shown are required to mount 3 carriage assemblies.

922


277B, 267B, 277, 267 "SERIES 2" WHEEL GP - IDLER (Front & Rear)


NUMBER

Wheel Gp - Idler (Front & Rear) 4 261-6300

Components of Group




Plug 1 108-2187

Idler Wheel (Middle) 1 230-3733 1

Idler Wheel - (Outer) 2 230-3732 2

Plate 2 278-1312

Bolt (1/2") 24 223-8372


Locknut 24 1K-6872

Mounting Hardware 3

Plate 2 204-1371

Bolt (3/8") 4 4L-6454


1 For optional steel idler wheel order 2 Idler Wheel 305-9260, (the 305-9260 is a 1/2 wheel).2 For optional steel idler wheel order Idler Wheel 305-9259.3 These components are not included in the idler group; quantities shown are required to mount each idler.

923


277B, 267B, 277, 267 WHEEL GP - IDLER (Front & Rear)


NUMBER


Components of Group

Axle Group - Idler 1 261-6103 1

Tube Assembly - Idler 1 236-5092

Axle Shaft - Idler 1 236-5090

Cone 2 111-2414

Cup 2 111-2415


Seal 2 199-9928 2

Plug 1 108-2187

Idler Wheel 2 230-3732 3

Idler Wheel - Center 1 230-3733 4


Bolt (1/2") 24 223-8372

Washer 24 8T-4223

Locknut 24 1K-6872

Mounting Hardware 5

Plate 2 204-1371

Bolt (3/8") 4 4L-6454


1 Serviced replaced by 1- 261-6301 and 2 - 278-1312.2 Serviced Replaced By: 8H-9789.3 For optional steel idler wheel order 2 Idler Wheel 305-9259.4 For optional steel idler wheel order 2 Idler Wheel 305-9260, (the 305-9260 is a 1/2 wheel).5 These components are not included in the idler group; quantities shown are required to mount each idler.

924


277B, 267B, 277, 267 "SERIES 2" WHEEL GP - TENSIONER ASSEMBLY


NUMBER


Components of Group




Plug 1 108-2187


Bogie Wheel - (Outer) 2 238-7728

Plate 2 261-6112

Bolt (3/8") 24 228-8403


Locknut 24 2K-4973

Mounting Hardware, Wheel Group to Plate Assembly 1

Plate 2 204-1371

Bolt (3/8") 4 4L-6454


Mounting Hardware Tensioner Assemblies to Frame Assembly 2

Bolt (1/2") 2 5P-2566


Locknut 2 9X-0941

1 These components are not included in the bogie wheel group; quantities shown are required to mount each bogie.2 These components are not included in bogie wheel group; quantities shown are required to mount each tensioner assemblies.

925


277B, 267B, 277, 267 WHEEL GP - TENSIONER ASSEMBLY


NUMBER


Components of Group




Bearing 2 199-9929

Seal 2 199-9928

Plug 1 108-2187



Plate 2 200-0809

Bolt (3/8") Outer Bogey Wheels 16 1B-2706

Bolt (3/8") Center Bogey Wheel 8 228-8403


Locknut 24 3K-6060

Mounting Hardware, Wheel Group to Plate Assembly 1

Plate 2 204-1371

Bolt (3/8") 4 4L-6454


Mounting Hardware Tensioner Assemblies to Frame Assembly 2

Bolt (1/2") 2 5P-2566


Locknut 2 9X-0941

1 These components are not included in the bogie wheel group; quantities shown are required to mount each bogie.2 These components are not included in bogie wheel group; quantities shown are required to mount each tensioner assemblies.

277B, 267B, 277, 267 "SERIES 2" UPGRADE KITS


NUMBER

Kit Option 1 1 1 305-9254

Kit Option 2 2 1 305-9253

1 Includes Rubber Track, Idler & Wheel Groups, Sprocket Bearing Group, Sprocket Sleeves (inner and outer) and hardware. Forinstallation/assembly instructions, refer to Special Instructions Media No. REHS4010.2 Includes Bogie & Wheel Groups. Refer to Special Instruction Media No. REHS4009.

926

Multi-Terrain Loaders, Compact Track Loaders287B, 287

287B, 287 BELTSZSA, CNY


NUMBER

Belt - Rubber 2 18.0" (460 mm) 220-8161

287B, 287 SPROCKET ASSEMBLY


NUMBER

Sprocket 1 261-6150

Ring 2 200-0996



Bolt (1/2") 12 8S-6212

Locknut 12 1K-6872

287B, 287 "SERIES 2" SPROCKET BEARING GROUP


NUMBER

Bearing Group - Sprocket 2 278-1240

Components of Group

Flange Group 1 278-1264

Seal 1 278-1265

Retainer 1 278-1266

Bearing - Ball 1 4B-3665

Ring - Retaining 1 8J-7636

927


287B, 287 "SERIES 2" WHEEL GP- BOGIE


NUMBER


Components of Group




Retainer - Ring 2 2J-8172

Plug 1 108-2187

Bogie Wheel (Outer) 2 238-7728


Plate 2 261-6112

Bolt (3/8") 24 228-8403


Locknut 24 2K-4973

Mounting Hardware 1

Plate 2 204-1371

Bolt (3/8") 4 4L-6454


1 These components are not included in the bogie wheel group; quantities shown are required to mount each bogie wheel group.

928


287B, 287 WHEEL GP- BOGIE


NUMBER


Components of Group




Bearing 4 199-9929

Retainer 2 210-4693

Retainer - Ring 2 2J-8172

Seal 2 199-9928

Plug 1 108-2187



Plate 2 261-6111

Plate 2 261-6112

Bolt (3/8") 24 228-8403


Locknut 24 2K-4973

Mounting Hardware 1

Plate 2 204-1371

Bolt (3/8") 4 4L-6454


1 These components are not included in the bogie wheel group; quantities shown are required to mount each bogie.

929


287B, 287 "SERIES 2" WHEEL GP- IDLER (FRONT AND REAR)


NUMBER


Components of Group




Plug 1 108-2187

Idler Wheel (Outer) 2 230-3732 1

Idler Wheel (Middle) 1 230-3733 2

Plate - Idler 2 278-1312

Bolt (1/2") 24 223-8372


Locknut 24 1K-6872

Mounting Hardware 3

Bracket 2 238-7709

Bolt (3/8") 8 4L-6454


1 For optional steel idler wheel order Idler Wheel 305-9259.2 For optional steel idler wheel order 2 Idler Wheel 305-9260, (the 305-9260 is a 1/2 wheel).3 These components are not included in the idler group; quantities shown are required to mount each idler group.

930


287B, 287 WHEEL GP- IDLER (FRONT AND REAR)


NUMBER

Wheel Gp - Idler (Front & Rear) 4 261-6106 1

Components of Group

Axle Group - Idler 1 261-6107 2

Tube Assembly - Idler 1 222-5683 2

Axle Shaft - Idler 1 222-5682 2

Cone 2 111-2414

Cup 2 111-2415


Seal 2 199-9928

Plug 1 108-2187

Idler Wheel 2 230-3732 3

Idler Wheel - Center 1 230-3733 4


Bolt (1/2") 24 223-8372

Washer 24 8T-4223

Locknut 24 1K-6872

Mounting Hardware 5

Bracket 2 238-7709

Bolt (3/8") 8 4L-6454


1 Serviced Replaced By: 1 - Idler Wheel Group - 261-6302.2 Serviced Replaced By: 1 - Idler Axle Group - 261-6303 & 2 - Idler Plate - 278-1312.3 For optional steel idler wheel order Idler Wheel 305-9259.4 For optional steel idler wheel order 2 Idler Wheel 305-9260, (the 305-9260 is a 1/2 wheel).5 These components are not included in the idler group; quantities shown are required to mount each idler.

287B, 287 "SERIES 2" UPGRADE KIT


NUMBER

Kit Option 1 1 1 305-9256

1 Includes rubber track, bogie & wheel groups, idler & wheel groups, sprocket bearing group, sprocket sleeves (inner and outer) andhardware. For installation/assembly instructions, refer to Special Instructions Media No. REHS4011.

931


279C, 289C, 299C BELTSMBT, JMP, JSP


NUMBER

Belt - Rubber 2 17.7" (450 mm) 304-1909

Belt - Rubber, Special Mud & Snow Tread 2 17.7" (450 mm) 343-4596

279C, 289C, 299C SPROCKETS

(PER SIDE) QUANTITY WIDTHPART

NUMBER

Sprocket - Track 1 304-1916

Bolt (16 mm) 12 8T-7338

Washer 12 3E-4356

279C, 289C, 299C FRONT IDLERS


NUMBER


Components of Group


Bearing 2 304-1883

Shaft 1 304-1886

Collar - Seal 1 304-1875


Seal Group - Duo Cone 2 171-5882

Ring - Toric 2 162-2166

Seal - Shaft O-Ring 2 5P-8215

Ring - Retainer 2 6V-3213

Plug - Pipe 1 9F-2247

Mounting Hardware 1

Bolt (20 mm) 2 8T-6430

Washer 2 8T-5439

1 Not included in idler group; quantity is required to mount each idler group.

932


279C, 289C, 299C REAR IDLERS


NUMBER


Components of Group


Bearing 2 304-1883

Shaft 1 304-1886




Ring - Toric 2 162-2166

Seal - Shaft O-Ring 2 5P-8215

Ring - Retainer 2 6V-3213


Mounting Hardware 1

Bolt (20 mm) 2 8T-6430

Washer 2 8T-5439


279C, 289C, 299C TRACK ROLLERS


NUMBER

Roller Group (Triple Flange) 10 304-1890

Components of Group


Bearing 2 304-1882

Shaft 1 304-1884




Ring - Toric 2 216-3442

Seal - Shaft O-Ring 2 5M-2057

Ring - Retainer 2 109-6488


Mounting Hardware 1

Bolt (20 mm) 2 8T-6430

Washer 2 8T-5439


933

Paving ProductsINDEX

Paving ProductsMODELS PAGE NO.

PM465 934.....................................................................................................................PM565B, PM565 936.....................................................................................................PR450, PR450C 941.......................................................................................................PR750B, PR750C, PR1000, PR1000C 943.....................................................................AP650B, BG225C 946....................................................................................................AP1050B, BG245C 950..................................................................................................AP1050 954....................................................................................................................AP1055B BG2455C 958.................................................................................................

934

Paving ProductsPM465

PM465 TRACK5.31" (135.0 mm) PITCH -- 1/2" BOLT



Track Links

RH Master 1 3A-9617

LH Master 1 3A-9616

RH Regular 29 3A-9615

LH Regular 29 3A-9614

Other Components

Pin 29 117-8882

Pin-Master 1 117-8883

Bushing 29 117-8880

Bushing-Master 1 117-8881

Spacer 2 117-8884

Cotter 1 096-7033

Track Hardware 1

Bolt 120 3A-9605

Nut 120 117-8885


PM465 TRACK SHOES5.31" (135.0 mm) PITCH -- 1/2" BOLT

TYPE WIDTHSEALED PART

NUMBER

Padded Shoe Assembly (Polyurethane) 10.00 in (254 mm) 236-8281

PM465 SPROCKETS



Bolt 36 8T-4193

Washer 36 9X-8257

935

Paving ProductsPM465

PM465 IDLERS


Idler Group 4 6I-6488


Idler Assembly 1 6I-6489 1

Bearing 2 2 5I-6274

Shaft 1 102-8082

Bearing 2 102-8084

Pin-Spring 2 3E-4370

Plug 1 7H-3171


Toric Ring 2 2 093-1364


1 Service Replaced by 277-8668.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

PM465 TRACK ROLLERS


NUMBER PART NUMBER

Single Flange (SF) 20 127-3806 1 244-3099

Components of Group

Roller -Bearing 2 - 247-7647

Roller Shell (SF) 1 6I-6525 -

Bearing 2 2 5I-6274 -

Shaft 1 102-8115 -

End Collar 1 127-3804 -

End Collar 1 127-3805 -


Toric Ring 2 2 136-0297 -

Seal -- Shaft O-Ring 2 095-1659 4J-0520

Plug 1 3D-4603 -

Dowel 2 102-8116 096-6783

Mounting Hardware 3

Bolt 4 8T-4648 8T-4648

Washer 4 8T-4223 8T-4223

1 Recommend upgrading to 244-3099 Roller Group, due to larger tread diameter should replace all roller groups at the same time.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 These components are not included in the roller group; quantities shown are required to mount each roller.

936

Paving ProductsPM565B, PM565

PM565B, PM565 TRACK6.75" (171.5 mm) PITCH -- 5/8" BOLT

QUANTITYSEALED PART

NUMBER


Track Links

RH Master 1 9K-0029

LH Master 1 9K-0028



Other Components

Pin 25 9K-4060

Pin-Master 1 9K-4062

Bushing 25 9K-4061

Bushing-Master 1 7K-2020


Spacer 2 9K-4059

Track Hardware 1

Bolt 104 7H-3597

Nut 104 1M-1408


PM565B, PM565 TRACK SHOES6.75" (171.5 mm) PITCH -- 5/8" BOLT


Triple Grouser (plate thickness 12 mm) 13.7 in (348 mm) 105-5013

Triple Grouser (plate thickness 13 mm, curved leading edge) 13.7 in (348 mm) 9G-6396

Padded Shoe Assembly (Polyurethane) 13.7 in (348 mm) 236-8282

PM565B, PM565 SPROCKETS6.75" (171.5 mm) PITCH


Sprocket Rim (19 Tooth) 2 1G-6133

Bolt 36 8T-4140

Washer 36 7X-0515

937


PM565B IDLERSSYMMETRIC SEAL DESIGN


Group 4 190-1551

Components of Group


Bearing 1 2 8P-7002

Shaft 1 160-9757

Collar 2 160-9756

Retainer 2 160-9761


Bolt 12 053-2294

Washer 12 5M-2894


Toric Ring 1 2 161-7249



Stopper 1 3T-9536

Plug 1 6Y-0473

Mounting Hardware 2

End Cap 2 125-3250

Pin 2 6B-6863

Bolt 4 7X-0349

Washer 4 8T-4122


938


PM565B, PM565 IDLERS 1

FORMER DESIGN (BOLT-ON RETAINER)


Group 4 --

Components of Group


Bearing 2 2 8P-7002

Shaft 1 6T-2620

Retainer 2 6T-2619


Bolt 12 053-2294 3

Washer 12 5M-2894




O-Ring 2 1 6V-2699


Stopper 1 3T-9536

Plug 1 6Y-0473

Mounting Hardware 4

End Cap 2 125-3250

Pin 2 6B-6863

Bolt 4 7X-0349

Washer 4 8T-4122



Toric Ring 1 7T-4087

O-Ring 1 6V-2699

1 3TK108-UP2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 Use 0S1594 bolt with former idler assembly 6T-26154 These components are not included in the idler group; quantities shown are required to mount each idler.

939


PM565 IDLERS3TK1-107


Group 4 --

Components of Group



Bolt 12 9B-7237

Washer 12 8T-4896

Shaft 1 8V-4714

Seal GP -- Duo-Cone 2 2M-2858 1

Toric Ring 2 1M-3097

Seal -- Bushing 2 1H-8128

Seal -- Shaft 2 7F-8267

Stopper 1 7G-4332

Plug 1 6Y-0473

Support Assembly (RH) 1 086-9723

Support Assembly (LH) 1 086-9722

Lock Pin 2 5M-5000

Bolt 2 7X-0310

Washer 2 5P-1076

Plate 1 086-9627

Bolt 4 7X-0325

Washer 4 8T-4223

1 Serviced Replaced By: 9W-5224.

940


PM565B, PM565 TRACK ROLLERS



Components of Group



Shaft 1 131-7239


Ring-Retainer 2 6V-6768






Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 3

Bolt 4 1A-8537

Washer 4 5P-8247

1 Serviced Replaced By: 9W-5224.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 These components are not included in the roller group; quantities shown are required to mount each roller.

941

Paving ProductsPR450, PR450C

PR450, PR450C TRACK6.125" (155.6 mm) PITCH -- 9/16" BOLT

QUANTITYSEALED PART

NUMBER


Track Links







Other Components

Pin 28 6B-5278

Bushing 28 6Y-1717


Track Hardware 1

Bolt 108 4K-7038

Nut 108 7K-2017



PR450, PR450C TRACK SHOES6.125" (155.6 mm) PITCH -- 9/16" BOLT





Rubber 14.0" (355 mm) 9N-4328 9N-4327

PR450, PR450C SPROCKETS


Sprocket Rim (20 Tooth) 1 7X-9835

Nut 10 8T-7530

942

Paving ProductsPR450, PR450C

PR450, PR450C IDLERS



Other Components (Per Idler GP)

Shaft 1 086-8712

Dowel 2 086-8706

Gasket 2 7R-2757

Bushing 2 7R-2758

Gasket 1 7R-2755

Plug 1 086-8710

Seal GP 2 7R-2756

PR450, PR450C TRACK ROLLERS



Components of Group



Bearing 1 6Y-4744

Shaft 1 6S-3171



Ring 2 6S-3172


Toric Ring 2 2 216-2956


Plug 1 9F-2247

Mounting Hardware 3

Bolt 4 0S-1585

Washer 4 2M-0849

1 Serviced Replaced By: 1 - Roller Group (SF) 281-8339, 4 - Bolt 0S-1585, 4 - Washer 2W-0849.2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 These components are not included in the roller group; quantities shown are required to mount each roller.

943

Paving ProductsPR750B, PR750C, PR1000, PR1000C

PR750B, PR750C, PR1000, PR1000C TRACK6.75" (171.5 mm) PITCH -- 5/8" BOLT

QUANTITYSEALED PART

NUMBER

Link Assembly -- 32 Section 3 9W-2379

Track Links

RH Master 1 9K-0029

LH Master 1 9K-0028



Other Components

Pin 31 9K-4060


Bushing 31 9K-4061



Spacer 2 9K-4059

Track Hardware 1

Bolt 128 7H-3597

Nut 128 1M-1408


PR750B, PR750C, PR1000, PR1000C TRACK SHOES6.75" (171.5 mm) PITCH -- 5/8" BOLT


Triple Grouser 18.0" (460 mm) 5N-4313

PR750B, PR750C, PR1000, PR1000C SPROCKETS


Sprocket Assembly 1 7X-7248

Sprocket Rim (Weld On) (23 Tooth) 1 3T-9153

Nut 16 3K-0453

944


PR750B, PR750C, PR1000, PR1000C IDLERS (SPROCKET TYPE)


Sprocket Assembly 3 8C-1149

Sprocket Rim (Weld On) (23 Tooth) 3 3T-9153


Shaft 1 9N-8381

Bearing Assembly 2 8T-4403

Retainer 2 8T-4506

PR750B, PR750C, PR1000, PR1000C CARRIER ROLLERS


Group 6 6K-9880

Components of Group


Shaft 1 6K-9861

Plate - Retainer 1 6K-9860

Bolt 2 6V-4791

Cup 2 1M-8736

Cone 2 1M-8735

Ring 1 1M-7914

Cover 1 3K-6638


Plug 1 2P-0347

Bolt 3 0L-1351

Washer 3 5M-2894







945


PR750B, PR750C, PR1000, PR1000C TRACK ROLLERS



Components of Group



Shaft 1 118-1610


Bolt 12 2P-3201




Seal -- Shaft O Ring 2 7F-8267

Stopper 1 7G-4332

Plug 1 6Y-0473

Mounting Hardware 2

Bolt 4 1A-1135

Washer 4 5P-8247


946

Paving ProductsAP650B, BG225C

AP650B, BG225C SEALED AND LUBRICATED TRACK9DN504-UP, 5GN506-UP

6.125" (155.6 mm) PITCH -- 9/16" BOLT




Track Links







Other Components

Pin 46 154-3660 1

Bushing 46 111-1522



Stopper 46 5G-2247

Plug 46 6Y-0473

Track Hardware 2

Bolt 184 8S-4745

Nut 184 7K-2017


Lock Nut (To Retain Pad Assemblies) 92 2K-4821

1 Service Replaced by 303-9455.2 Not part of link assembly; required to assemble track group.

947


AP650B, BG225C TRACK6.125" (155.6 mm) PITCH -- 9/16" BOLT




Track Links







Other Components

Pin 46 6B-5278

Bushing 46 6Y-1717


Track Hardware 2

Bolt 184 8S-4745

Nut 184 7K-2017


Lock Nut 92 2K-4821

1 Upgrade to Sealed and Lubricated Link Assembly 222-2265.2 Not part of link assembly; required to assemble track group.

AP650B, BG225C TRACK SHOES6.125" (155.6 mm) PITCH -- 9/16" BOLT


Rubber Bonded Pad Assembly 14.0" (355 mm) 132-1998

Plate Backing 14.0" (355 mm) 136-1090

Plate Backing (Master) 14.0" (355 mm) 136-1135

AP650B, BG225C SPROCKETS



Bolt 20 8T-5042

Washer 20 8T-4123

948


AP650B, BG225C IDLERS


Idler Group (Serviced as separate parts) 2 --

Components of Group

Idler Shell 1 5E-7938


Cup 2 006-7231

Cone 1 006-7232

Cone 1 4D-3882

Retainer 1 7R-0227

Cover 1 7R-0226

Lock 1 7R-0228

Seal 1 1J-4034

Bolt 3 8T-8917

Bolt 4 4M-0061

Washer 4 8T-4224

AP650B, BG225C CARRIER ROLLERS


Group 2 6S-3609

Components of Group


Shaft 1 6K-9861

Cup 2 1M-8736

Cone 2 1M-8735

Ring 1 1M-7914

Cover 1 4H-9527



Bolt 5 0L-1351

Washer 5 3B-4506

Bolt 2 6V-4791






949


AP650B, BG225C TRACK ROLLERS (FRONT)


Single Flange (SF) (Serviced as separate parts) 8 --

Components of Group


Cone 1 006-7232

Cup 2 006-7231

Cone 1 4D-3882

Retainer 1 7R-0227

Cover 1 7R-0226

Lock 1 7R-0228

Seal 1 1J-4034

Bolt 3 8T-8917

Bolt 4 4M-0061

Washer 4 8T-4224

AP650B, BG225C TRACK ROLLERS (REAR)



Components of Group



Bearing 2 1 6Y-4744

Shaft 1 6S-3171

Ring 2 6S-3172



Seal --- Duo-Cone Group 2 216-2957

Toric Ring 2 2 216-2956


Plug 1 9F-2247

Mounting Hardware 3

Bolt 12 5P-2566

Washer 12 8T-4223


950


AP1050B, BG245C SEALED AND LUBRICATED TRACK6ZN248-UP, 4XN148-UP

6.125" (155.6 mm) PITCH -- 9/16" BOLT




Track Links







Other Components

Pin 50 154-3660

Bushing 50 111-1522



Stopper 50 5G-2247

Plug 50 6Y-0473

Track Hardware 1

Bolt 196 8S-4745

Nut 196 7K-2017




951


AP1050B, BG245C TRACK6.125" (155.6 mm) PITCH -- 9/16" BOLT



Track Links







Other Components

Pin 50 6B-5278

Bushing 50 6Y-1717


Track Hardware 2

Bolt 196 8S-4745

Nut 196 7K-2017



1 Upgrade to 222-3058 Sealed and Lubricated Link Assembly.2 Not part of link assembly; required to assemble track group.

AP1050B, BG245C TRACK SHOES6.125" (155.6 mm) PITCH -- 9/16" BOLT



Pad 14.0" (355 mm) 132-1998 132-1998

Plate Backing 14.0" (355 mm) 136-1090 136-1135

AP1050B, BG245C SPROCKETS


Sprocket Assembly (25 Tooth) 1 105-8884

Bolt 20 8T-5042

Washer 20 8T-4123

952


AP1050B, BG245C IDLERS



Components of Group



Cup 2 006-7231

Cone 1 006-7232

Cone 1 4D-3882

Retainer 1 7R-0227

Cover 1 7R-0226

Lock 1 7R-0228

Seal 1 1J-4034

Bolt 3 8T-8917

Bolt 4 4M-0061

Washer 4 8T-4224

AP1050B, BG245C CARRIER ROLLERS


Group 4 6S-3609

Components of Group


Shaft 1 6K-9861

Cup 2 1M-8736

Cone 2 1M-8735

Ring 1 1M-7914

Cover 1 4H-9527



Bolt 5 0L-1351

Washer 5 3B-4506

Bolt 2 6V-4791






953


AP1050B, BG245C TRACK ROLLERS (FRONT AND CENTER)



Components of Group


Cone 1 006-7232

Cup 2 006-7231

Cone 1 4D-3882

Retainer 1 7R-0227

Cover 1 7R-0226

Lock 1 7R-0228

Seal 1 1J-4034

Bolt 3 8T-8917

Bolt 4 4M-0061

Washer 4 8T-4224

AP1050B, BG245C TRACK ROLLERS (REAR)



Components of Group



Bearing 2 1 6Y-4744

Shaft 1 6S-3171

Ring 2 6S-3172



Seal --- Duo-Cone Group 2 216-2957

Toric Ring 2 2 216-2956


Plug 1 9F-2247

Mounting Hardware 3

Bolt 12 5P-2566

Washer 12 8T-4223


954

Paving ProductsAP1050

AP1050 SEALED AND LUBRICATED TRACK6.125" (155.6 mm) PITCH -- 9/16" BOLT




Track Links







Other Components

Pin 50 154-3660

Bushing 50 111-1522



Stopper 50 5G-2247

Plug 50 6Y-0473

Track Hardware 1

Bolt 196 4K-7038

Nut 196 7K-2017



955


AP1050 SEALED TRACK6.125" (155.6 mm) PITCH -- 9/16" BOLT

(PER MACHINE) QUANTITYSEALED PART

NUMBER


Track Links







Other Components

Pin 50 6B-5278

Bushing 50 6Y-1717


Track Hardware 2

Bolt 196 4K-7038

Nut 196 7K-2017


1 Upgrade to 222-3058 Sealed and Lubricated Link Assembly.2 Not part of link assembly; required to assemble track group.

AP1050 TRACK SHOES6.125" (155.6 mm) PITCH -- 9/16" BOLT





Rubber Bonded 14.0" (355 mm) 9N-4328 9N-4327

Polyurethane Bonded 14.0" (355 mm) 1G-5515 1G-5516

AP1050 SPROCKETS


Sprocket Assembly (25 Tooth) 1 5E-7937

Bolt 16 8T-5042

Washer 16 8T-4123

956


AP1050 IDLERS



Components of Group


Spindle Assembly 1 7R-0234

Cup 2 006-7231

Cone 1 006-7232

Cone 1 4D-3882

Retainer 1 7R-0227

Cover 1 7R-0226

Lock 1 7R-0228

Seal 1 1J-4034

Bolt 3 8T-8917

Bolt 4 4M-0061

Washer 4 8T-4224

AP1050 CARRIER ROLLERS


Group 2 6S-3609

Components of Group


Shaft 1 6K-9861

Cup 2 1M-8736

Cone 2 1M-8735

Ring 1 1M-7914

Cover 1 4H-9527



Bolt 5 0L-1351

Washer 5 3B-4506

Bolt 2 6V-4791






957


AP1050 TRACK ROLLERS



Components of Group


Shaft 1 7R-0241

Cup 2 006-7231

Cone 1 006-7232

Cone 1 4D-3882

Retainer 1 7R-0227

Cover 1 7R-0226

Bolt 4 4M-0061

Washer 4 8T-4224

Seal 1 1J-4034

Plate Lock 1 7R-0228

Bolt 3 8T-8917

AP1050 TRACK ROLLERS (REAR)


No Flange (NF) (Serviced as separate parts) 2

Components of Group


Shaft 1 7R-0241

Bearing 1 125-7766

Race 1 --

Bearing 1 --

Spacer 1 --

Retainer 1 125-7768

Cover 1 125-7769

Lock 1 7R-0228

Spacer 1 --

Spacer 1 --

Bolt 3 8T-8917

Bolt 6 9B-7237

Washer 6 8T-4896

Seal 1 4B-9371

Fitting 1 3B-8489

Seal (Rear) 1 129-8552

Screw 3 031-6100

958

Paving ProductsAP1055B BG2455C

AP1055B BG2455C DRIVE BELTS

(PER MACHINE) QUANTITY WIDTH PART NUMBER

Drive Belt (Wide) 2 18.0" (457 mm) 1R-1317 1

1 Serviced Replaced by: 294-0541.

AP1055B BG2455C DRIVE WHEELS


Wheel Assembly 4 1R-1124

Mounting Nut 1 12 111-8207

1 Quantities required per two wheel assemblies.

AP1055B BG2455C IDLERS



Mounting Stud 1 24 3V-4045

Mounting Nut 1 24 111-8207

1 Quantities required per two idler assemblies.

AP1055B BG2455C MID-ROLLERS


Roller Assembly 20 1R-1198

Bolt 1 8 5C-9553

Nut 1 8 8T-4205

1 Quantities required per two roller assemblies.

959

Product InformationINDEX

Product InformationMODELS PAGE NO.

LINK ASSEMBLIES 960................................................................................................TRACK LINKS 961.........................................................................................................TRACK PINS / TRACK BUSHINGS 964........................................................................TRACK SEALS 965........................................................................................................SPROCKETS 967...........................................................................................................TRACK SHOES 968.......................................................................................................TRACK HARDWARE 971..............................................................................................TRACK ROLLERS 973...................................................................................................CARRIER ROLLERS 978................................................................................................IDLERS 979....................................................................................................................GUARDS 980.................................................................................................................PROPER TRACK SAG 981............................................................................................TRACK ROLLER FRAME EXTENSION 982..................................................................

960

Product InformationLINK ASSEMBLIES

••• T

s• Fle••

•

• Pbe

•

Av• Slee•• TM ev•• ve•

•

.

LINK ASSEMBLIES

FunctionsProvide a rail for the machine to run on.Provide a means to attach track shoes.

ransmits driving force from track bushing to track shoe.

Requirementxible joints between sections.

Matched wear and structural life of components.Components replaceable and/or reusable.

FeaturesAssembled from components designed and manufactured to fit and work together as a system.

ins, bushings and links resist loosening, cracking, and breaking until wornyond wear limits.

Designed for a second wear life if proper maintenance and rebuilding practices are followed.

Supporting Reference Material ailableve Bearing Track Data Sheet (PEHJ0004)

Grease Lubricated Track Data Sheet (PEHP9555)SystemOne Undercarriage El ated Sprocket Machines (PEHJ0060)SystemOne al Track Machines (PEHJ0064)PositiHea rack Data Sheet (PEHP5031)

• R

ve Bearing

vy Duty

TM Undercarriage Ov Pin Retention Data Sheet (PEHP7025)

vy Duty Totating Bushing Track Data Sheet (PEHP5030)

Sealed and Lubricated Track Data Sheet (PEDP0036)

Note: Sealed Track is not offered on elevated sprocket tractors

Slee Track

Grease Lubricated Track

SystemOneTM Track Positive Pin Retention Track Hea Track

Sealed TrackSealed and Lubricated TrackRotating Bushing Track

961

Product InformationTRACK LINKS

TRACK LINKS

Functions• Provide a continuous rail for rollers.• Support weight of the machine.Requirements• Machined to close tolerances for pin, bushing and shoe retention.• Long rail wear life.• Resist cracking, spalling and fatigue failures.• Rebuildable.Features• Forged of Deep Hardening Steel. • Massive strut design.• High body hardness. • Self-locking nut seats.• Uniform rail hardness. • Rebuildable.• High rail design.Deep Hardening SteelDeep Hardening Steel used in current links allows high body hardness, greater hardened depth and greater fatigueresistance than plain medium carbon steel.

High Body HardnessLinks on current track-type tractors, loaders, and excavators have a high body hardness. This increases toughness,durability, fatigue resistance and improves pin and bushing retention.

Uniform Rail HardnessLink rails are pattern induction heated, spray water quenched andfurnace tempered for a deep, uniform hardened depth. This gives linkrails a crown hardness pattern that resists side wear and roll-over. Thehardened rail matches the track roller tread and flange hardness foroptimum wear life.

High Rail DesignThe high rail design link has more pin boss-to-roller flange clearance(working clearance) than former links. This means longer link and rollerwear life potential.

RebuildabilityCat® track links are rebuildable; high body hardness results in good pin and bushing retention, even afterrepeated disassembly and reassembly.

Massive Strut DesignProvides the best available resistance to cracking failuresthat result from flexing shoes, pins, and bushings.

Self-locking Nut SeatsAllow easy installation and removal of track shoes. Also, helpkeep hardware tight.

The nut and nut seat on “L”, “N”, “R”, and “T” seriestractors are rounded to reduce stress risers in the link.

HardenedDepth

BodyHardness

PinBoss

BushingBore

Self-LockingNut Seat

MassiveStrut

Pin Bore

Rail

Self-Locking nut seat Mailbox DesignNut Seat

962


963


225

Model Bolt Size Initial TorqueD6T, D6R, D6H, 963 22 mm 370 20 ft. lbs. 500 25 NmD6N, D6M, D5H, 953 20 mm 300 20 ft. lbs. 400 25 NmD6K, D5K 18 mm 260 20 ft. lbs. 350 25 NmD4K, D4G, D4C, D3K, D3G, D3C 16 mm 20 ft. lbs. 25 Nm165

SystemOne™

Master Links with Center Strut

TRACK CLAMP MASTER

+/-+/-+/-+/-

+/-+/-+/-+/-

AdditionalTurn

180º 180º 120º 120º

250

Model Bolt Size Initial TorqueD6T, D6R, D6H, 963 22 mm 300 20 ft. lbs. 400 25 NmD6N, D6M, D5H, 953 20 mm 220 20 ft. lbs. 300 25 NmD6K, D5K 18 mm 180 20 ft. lbs. 250 25 NmD5C, D5G, D5N 16 mm 20 ft. lbs. 25 Nm180

Master Links with no Center Strut

+/-+/-+/-+/-

+/-+/-+/-+/-

AdditionalTurn

360º* 360º* 360º* 360º*

* For master links with no center strut, perform a 90º turn on each of the four bolts then repeat the 90º turn three more times for a total of 360º

964

Product InformationTRACK PINS / TRACK BUSHINGS

TRACK PINS

Functions• Help hold track section together.• Act as hinge with bushing at adjoining section.• Transfer loads between bushing and link.• Provide reservoir for lubricant in Sealed and Lubricated Track.Requirements• Strength — to resist flexing and cracking, even when worn to limit.• Wear Resistant.• Finished to close dimensions — for accurate press fit with link and

clearances with bushing I.D.Features• Machined from medium carbon steel.• Heat treated.

—Induction hardened.—Spray water quenched.—Tempered.

• Sealed and Lubricated Track pins ground to final dimensions.

MEDIUM CARBON STEEL

Cat® manufactures track pins from a medium carbon steel which provides a tough pin with good surfacehardness. This provides good spalling and cracking resistance in high impact conditions.

Sealed and Lubricated Track pins are center drilled to provide an oil reservoir and cross drilled to provide a passagefor the oil to flow between the pin and bushing. After heat treatment the pin ends are ground to provide the close finaldimensions required for accurate press fit and oil retention.

TRACK BUSHINGSFunctions• Help hold track section together.• Act as hinge with pin of adjacent section.• Provide sealing surface to keep abrasives out and lubricant in with Sealed and

Lubricated Track.

Requirements• Strength — to resist cracking, even when worn to service limits.• Finished to close dimensions — for accurate press fit into link bushing bore

clearance with pin O.D.• Wear resistant — on I.D. equal to pin, on O.D. greater than sprocket.• Smooth finish on end — to maximize sealing and minimize seal wear.

Features• Formed by cold extrusion of low carbon steel. (Extruded bushings have

smoother inner and outer surfaces with more uniform dimensions than machinedbushings.

• Carburized and heat treated for optimum hardness and toughness.

Difference between Sealed Track bushings and Sealed and Lubricated Track bushingsSealed and Lubricated Track bushings are:• Polished on the ends for a smooth sealing surface.• Shorter than Sealed Track bushings to provide the space needed in the link counterbore for the thicker thrust ring

and seal.

Sealed Track Pin

Sealed and LubricatedTrack Pin

Straight Wall

Stepped

965

Product InformationTRACK SEALS

SEALED TRACK SEALS

Functions• Retard abrasive entry between pin and bushing.• Prevent bushing from wearing against link counterbore.• Carry side loads.

Requirements• Wear life equal to pin and bushing turn time.• Have spring-like resiliency without brittleness.

Features• Made from hardened and tempered spring steel.

Seals are formed like cone shaped washers. Used in pairs, they fit intoeach link counterbore. One washer butts against the bushing end, theother against the link counterbore base. When track sections arepressed together, the washers flatten to form a seal. The spring effectof the flattened washers maintains sealing pressure as they wear. Sealsare designed to wear against each other instead of against the linkcounterbore and bushing end. This system extends internal pin andbushing life by 20-30% compared to unsealed track. Sealed TrackSeals are not reusable at turn time.

GREASE LUBRICATED TRACK SEALS

Internal pin and bushing wear is usually the reason for track maintenance with Sealed Track. Caterpillar engineershave designed a track system that reduces internal pin and bushing wear on excavators. The sealing arrangement iswhat makes this reduction possible.

Functions• Keep abrasives out of internal pin and bushing joint.• Keep grease in joint.• Absorb side or thrust loads.• Reduction in noise compared to Sealed Track.

Requirements• Pin and Bushing internal wear life affected less by external

environment.• Not a lifetime lubricated track.

Features• Seal Assembly – Consists of a “W” shape polyurethane seal. The

seal contacts the smooth bushing end. The seal distributes an evenload along the sealing surface to assure a 360° seal.

• Seals are designed to operate at a maximum temperature of 70° C(160° F). Exposure to high temperatures will reduce seal life.

• Shorter bushing compared to Sealed Track.

Benefits of Grease Lubricated Track• Internal pin and bushing wear reduced as the primary maintenance consideration.• The system keeps abrasives from entering the internal pin, bushing, and link counterbore area of the joint.• Grease reduces normal friction and wear between the pin and bushing.• Decrease of internal wear and resulting track pitch extension reduces snaky track; this reduces wear on other

components, such as links, rollers, and guiding components.• Most undercarriage components are reusable.• Internal bushing life is extended about 20% compared to Sealed Track.

Uncompressed Seals Compressed Seals

966

Product InformationTRACK SEALS

SEALED AND LUBRICATED TRACK SEALSInternal pin and bushing wear is usually the reason for track maintenance with Sealed Track. Caterpillar engineersdesigned a track system that would eliminate internal pin and bushing wear as a maintenance consideration. Thesealing arrangement is what makes this possible.

Functions• Keep abrasives out of internal pin and bushing joint.• Keep lubricant in joint.• Absorb side or thrust loads.

Requirements• Pin and Bushing internal wear life not affected by external environment.

Features• Seal Assembly — Consists of a plastic seal and resilient rubber load ring. The seal

contacts the smooth bushing end. The rubber load ring distributes an even load along thesealing surface to assure a 360° seal.Seals are designed to operate at a maximum temperature of 70° C (160° F). Exposure tohigher temperatures will reduce seal life.

• Greater end play capacity from .030 to .060.• Thrust Ring — Made from hardened steel, it protects the seal assembly from side thrust

loads. The ring has notches so the oil can flow past the ring into the sealing areas.• Rigid Seal Design now available for all Elevated Sprocket machines, Low Sprocket

machines, and Track Type Loader machines.

Benefits of Sealed and Lubricated Track• Internal pin and bushing wear eliminated as the primary maintenance consideration.• The system keeps abrasives from entering the internal pin, bushing, and link counterbore

area of the joint.• Lubricant eliminates normal friction and wear between the pin and bushing.• Absence of internal wear and resulting track pitch extension reduces snaky track; this reduces wear on other

components, such as links, rollers and guiding components.• Most undercarriage components are reusable.• External bushing life is extended about 50% compared to Sealed Track.

Oil• Cat® uses Synthetic SAE 75W–140 gear oil to lubricate the joint.

Rigid Seal

967

Product InformationSPROCKETS

968

Product InformationTRACK SHOES

TRACK SHOES

Functions• Support the machine’s weight on the ground.• Provide traction.

Requirements• Strength — to resist bending and breaking.• Wear resistant grouser and plate.• Retention — to resist loosening during link wear life.

Features• Furnace or induction hardened, die quenched and tempered.• Curved leading and trailing edge.• Rebuildable

Curved leading and trailing edges provide stiffness to reduce shoe bending and hardware loosening. Overlapped edgeskeep debris from lodging between shoes as the track bends around the sprocket and idler.

Track Shoe Selection

The wide variety of working conditions makes choosing the right shoe very important. A good rule is: choose thenarrowest shoe that provides adequate flotation. Shoes that are too wide will loosen, bend and crack more easily.They require more power to turn, and affect maneuverability. Shoes of the correct width give maximum performanceand the lowest possible cost to the entire system.

Cat offers the following track shoes:

SINGLE GROUSER MODERATE SERVICE SHOES (MS)

The Moderate Service shoe is the best shoe for low to medium impact andabrasive conditions. It gives the best penetration and traction, resists wear andbending and is available in various widths and modifications. Rolled frommodified medium carbon steel.

SINGLE GROUSER EXTREME SERVICE SHOES (ES)

Extreme Service shoes should be used wherever the Moderate Service shoe bends or breaks, or where links outlastshoes. Extreme Service shoes are both stronger to resist bending and breaking and have more allowable wear materialthan the Moderate Service shoe. Greater Strength – Extreme Service shoes are rolled from tough alloy steel. They arealso more massive. They are heat treated to provide a higher tensile strength to resist bending and breaking in highimpact conditions. More Wear Material – Extreme Service shoes have up toapproximately 50% more allowable wear material than the respectiveModerate Service shoe. More Rebuildable – Because of the thicker section onthe Extreme Service shoe, it can be successfully regrousered more times thanthe Moderate Service shoe (when used in similar conditions and worn tocomparable limits).

SINGLE GROUSER SUPER EXTREME SERVICE SHOES (SES)

Super Extreme Service shoes provide approximately 25% more life than theExtreme Service in high wear applications.

Single Grouser Shoe

ES

MS

SES

969


MULTI-GROUSER SHOE (Triple and Double Grouser)

Multi-Grouser shoes have less penetration and traction than Single Grouser shoes,but better turning ability. These shoes are standard on track-type loaders andexcavators because less turning resistance and greater maneuverability are needed.By spreading tractor weight over the larger contact area of several low profilegrousers, the turning resistance is reduced and maneuverability improved.

SPECIAL SHOES

Self-Cleaning, Low Ground Pressure Shoe

This shoe is designed for use in loose, muddy conditions. As these shoes movearound the sprocket and idler, they separate from one another, causing debris to fallout. These cast steel shoes come in widths that make them suitable for LGPmachines only and should not be used in high abrasive or high impact conditions.

Chopper

This shoe is designed for use in demolition and landfill applications wherecompaction is required. Designed with a full length front grouser, two angled sidegrousers and a center opening for material extrusion, these shoes provide long wearlife and structural life in the most demanding underfoot conditions.

Steel Mill Flat

Designed for use in hot slag and other heavy abrasive materials where lowpenetration and high wear and bending resistance is required. Large, countersunkbolt holes are designed to protect the bolt heads.

TRACK SHOE SUPPORTS FOR HYDRAULIC EXCAVATORS

Forestry applications for Hydraulic Excavators generally involve high impact and severe underfoot conditions forthe undercarriage components. For this reason, full length track shoe supports mounted to the track roller frame arerecommended for forestry applications. These shoe supports are intended to limit the torsional loads experiencedby the link assembly when the machine encounters uneven underfoot conditions.

As the machine rides over objects such as rocks or stumps, the track shoe deflects and the track chain begins to twist.With track shoe supports, the shoes contact the support and prevent further twisting of the chain. These supports limitthe loads going into the link assembly and significantly reduce the occurrence of link cracking and track pin walking.

Triple Grouser

Double Grouser

Steel Mill Flat

Low Ground Pressure Shoe

Chopper Shoe

970


971

Product InformationTRACK HARDWARE

TRACK BOLTS

Function• Hold the shoe on the link.

Requirements• Wear resistant head.• Tensile and shear strength.

Features• Induction hardened heads.• Rolled threads.• Tensile strength exceeds Grade 8 specifications.• Reusable

Induction Hardened HeadsTrack bolt heads are induction hardened to protect them from deforming in high impact, highly abrasive conditions toextend their wear life.

Rolled ThreadsRolled threads resist stripping better than cut threads. By rolling, the natural flow lines of the steel follow the threadcontours. Cutting threads cut the flow lines, making the threads weaker.

StrengthCat track bolts exceed Grade 8 strength requirements with a minimum tensile strength of 160,000 PSI.

TRACK NUTSFunction:• Used with the track bolt to hold the shoe to the link.

Requirements• Strength• Retention on bolt.

Features• Furnace hardened and tempered.• Self-locking.

Furnace hardenedTrack nuts are thru-hardened and tempered to match or exceed bolt strength. Track nut core hardness is Rc30minimum.

Self-lockingTrack nuts are designed to fit into the nut seats in the link strap area. Broached grooves hold the nut so bolts can beremoved from the shoe.

Rolled Threads

Mailbox Nut DesignSquare Nut Design

972

Product InformationTRACK HARDWARE

973

Product InformationTRACK ROLLERS

TRACK ROLLERS

Functions• Support the machine on the track.• Guide the machine along the track.Requirements• Strength — to resist structural failure before tread wear life is utilized.• Shell tread wear life equal to links• Shell tread and flanges rebuildable.• Most internal components reusable.• No maintenance during original tread wear life.Features• Shells forged from deep hardening steel and are designed to resist bellmouthing.• Shafts and bearings are designed to reduce friction and wear and to provide maximum strength.• Lifetime Lubricated for minimum maintenance.• Bronzed Sleeve Bearing

• Sleeve design provides a large surface area for better load distribution.• Inner diameter surface is polished to a smooth finish.• Soft bronze coating in the bearing absorbs any small foreign particles before they can damage the shaft and seals.

• Duo-Cone Seal• Seals oil in and abrasives out.• The Duo-Cone Seal consists of two metal seal rings and two rubber toric rings. The toric rings provide the

proper pressure to both sides of the metal seal rings.• Resists permanent deformation and temperature changes from -40F (-40C ) to 225 F (107 C). Extreme

Temperature Seals respond over a wider temperature range from -60F (-50C ) to 325F (163 C) constant and450 F (233 C) peak.

• Duo-Cone Seals are designed to last through several roller shell tread lives, depending on individual conditions.For reusability guidelines, refer to SEBF8511 (Guidelines for Reusable Parts).

• Oil• Cat® Lifetime Lubricated Track Rollers use a 30 weight oil, which cools and lubricates better than grease.

Caterpillar track-type tractors and loaders use both single and double flange rollers. Typically excavators use all singleflange rollers. Single flange rollers are used adjacent to the sprocket so they can be placed closer to the sprocket.Double flanged rollers are used to maximize the guiding effect wherever space permits.

SystemOne™ TRACK ROLLERS• Serviced at Roller Group level• Single flange roller shell

• Forged from deep hardened steel and through hardened heat treated for internal strength to resist bellmouthingand uniform hardened depth that provides wear life equal to link wear life

• Through hardened flanges to resist wear and prevent cracking or breakage• Tall flange rollers for superior guiding

• Track Roller Shaft• Forged and heat treated for strength• Bearing surfaces are hardened and polished to reduce friction and wear

• End Caps• Retain the roller shaft to the track roller frame and provides serviceability• Not part of the roller group and serviced separately

974


The unique characteristics of the four roller designs are as follows:

For D11R, D11N, D10, D10T, D10R, D10N, D9T, D9R, D9N, D9L, D8T, D8R, D8N, D8L

Track Roller Shell

• Forged from Deep Hardening Steel and heat treated for internal strengthto resist bellmouthing and to increase rebuildability.

• 2-piece roller shell rim • Heat treated for a deep, uniform hardened depth that provides wear life

equal to link wear life.• Thru-hardened flanges to resist bending and improve rebuildability.• Steel-backed bronze bearings are press fit inside the shell.

Track Roller Shaft• Forged and heat treated for strength.• Bearing surfaces are hardened and polished to reduce friction and wear.• Larger diameter for greater load bearing capacity.

Retainer• Bolts to the ends of the track roller shells.• Transmits side loads to the roller shaft and houses the Duo-Cone Seals.

End Caps• End caps retain the roller shaft to bogies, and provide serviceability.• End caps are serviced separately.

For D7R, D7H, D6R, D6H, D6N, D6M, D5H, D5N, D5M, D4H 973, 963, 953, 943

Track Roller Shell• Forged from Deep Hardening Steel and heat treated for internal strength to resist

bellmouthing and to increase rebuildability.• 2-piece roller shell rim • Heat treated for a deep, uniform hardened depth that provides wear life equal to

link wear life.• Thru-hardened flanges to resist bending and improve rebuildability.

Track Roller Shaft• Forged and heat treated for strength.• Bearing surfaces are hardened and polished to reduce friction and wear.• Center flange absorbs side thrust from roller shell.

Cast Iron Bushing• Supports the bronze sleeve bearing.• Cast from iron to absorb loads without permanent deformation.• Large lubricant reservoir to reduce heat build-up.

End Collar• Attaches the track roller to the track roller frame.• Houses and protects the outer Duo-Cone Seal.

Snap Ring Design• Retain cast iron bushing.• Eliminates need to use bolts to retain cast iron bushing.

975


For Excavators

Track Roller Shell• 2-piece roller shell rim.• Forged from deep hardening steel and heat treated for internal strength to resist bellmouthing.• Heat treated for a deep, uniform hardened depth that provides good wear life.• A large oil reservoir is provided for in the shell and is filled through a threaded hole located between the wear

surfaces.• Steel-backed bronze bearing is press fit inside the shell.

Track Roller Shaft• Forged and heat treated for strength.• Bearing surfaces are hardened and polished to reduce friction and wear.• Large diameter for a greater load bearing capacity.• Straight, solid shaft, with a hole in each end to provide positive attachment of the

end collar.• Reduces end play growth.

End Collar• Completely encircles the shaft to give added strength. Connected to the shaft by pins. Mounting surface area is

larger for improved bolt retention.

For Low Sprocket D9H, D8K, D7G, D6D, D5G, D5C, D5B, D4E, D4B,D4G, D3G, D4C, D3C, D3 and 983, 977, 955, 951, 941, 939, 935, 933, 931

Track Roller Shell• Forged from Deep Hardening Steel and heat treated for internal strength to

resist bellmouthing and to increase rebuildability.• 2-piece roller shell rim.• Heat treated for a deep, uniform hardened depth that provides wear life equal

to link wear life.• Thru-hardened flanges to resist bending and improve rebuildability.

Track Roller Shaft• Forged and heat treated for strength.• Bearing surfaces are hardened and polished to reduce friction and wear.• Center flange absorbs side thrust from roller shell.

Cast Iron Bushing• Supports the bronze sleeve bearing.• Cast from iron to absorb loads without permanent deformation.• Large lubricant reservoir to reduce heat build-up.

End Collar• Attaches the track roller to the track roller frame.• Houses and protects the outer Duo-Cone Seal.

976


Track Roller SequenceUse the following charts to determine the original position of track rollers, identified by their flange type. The letter Drepresents a Double flange roller and the letter S represents a Single flange roller.

ELEVATED SPROCKET MACHINESRollers

Model Per Side Roller PositionD11R/N*, D10T/R/N*, D10* 8 S D D D D S SD9T/R/N*, D9L 8 S D D D D S SD8T/R/N*, D8L* 8 S D D D D S SD7R/H STD & LGP 7 D S D S D SD7R/H XR 8 D S D D S D SD6T/R/H STD 6 D S D S SD6H XL & XR 7 D S D S D SD6T/R/H XW & XL 7 D S D S D SD6T/R/H LGP 8 D S D D S D SD6N/M XL, D5H TSK & XL 7 D S D S D SD5H STD 6 D S S D SD6N/M LGP, D5H LGP 8 D S D D S D SD5M D4H STD, D5N/M XL, D4H XL 7 D S D S D SD5M LGP, D4H LGP & TSK 7 D S D S D SD5N/M LGP, D4H LGP 8 D S D D S D S527 517 Skidders 7 D S D S D S527 517 Skidders 8 D S D D S D S572R, 561M, 561H 7 D S D S D S578 8 S D D D D S S583R 9 D D D D D D D D589 10 S D D D D D D S S

* Machines with large diameter single flange rollers.

SystemOne™ Track Roller Sequence:For elevated sprocket machines all rollers are single flange. Rollers per side are the same as in the table above.

SSSSSSSSSSSSS

SSSSSDS

S

977


LOW SPROCKET TRACTORS AND LOADERSRollers Roller Position

Model Per Side F 2 3 4 5 6 7D9G & H D D S D S D SD9D, E & G D D S D S D SD8H & K D D S S D D SD8H S D S D SD8NC (8.00" Pitch) D S D S D SD7E, F & G D S D S D SD7 LGP D S D S D SD7NC (8.00" Pitch) D S D SD6C & D D S D S D SD6B & D6NC D D D D SD6 LGP D S D S D SD6K S S S S S SD5C D S S D SD5 & D5B D D S D SD5 LGP D D S D D SD4G XL LGP, D5C XL LGP, D5G XL LGP D S D S D SD4B, D4B LGP, D4C, D4C LGP S D S S D SD4D & E, LGP D D S D SD4NC D D SD3, D3 LGP, D3B, D3C S D S D SD3B LGP, D3C LGP, D3G XL LGP S D S S D SD3 Special LGP D S S D S SD2 D D S983 D S D S D S973 D D S D D S977E, H & K D D S D S D S977D & No. 6 S D D D D D S955K, L & LGP, 963 D D S D S955H D D D D S955F, E & C D D S D S953, 943 D S S D S951A S D S D951B D S D S951 LGP S D S D S941 incl. LGP, 933E & F D D S D S933C, 933*, 939 D S S D S931 incl. LGP, 935 D S D S

* New design.

SystemOne™ Track Roller Sequence:For low sprocket tractors and loaders all rollers are single flange. Rollers per side are the same as in the table above.

67

75

6776677

4

7477

66

655

65

DD

DS

SDSSSSS

S

DSDS

SS

SDS

SS

777

6

6

5

77

5

5

5

5

6

6

978

Product InformationCARRIER ROLLERS

CARRIER ROLLERS

Functions• Support the track as it moves between the sprocket and idler.• Guide the track between the sprocket and idler.

Requirements• Strength — to resist failure before tread wear life is utilized.• Tread wear life matched to track links.• Treads and flanges rebuildable on forged shells• Most internal components reusable.• No maintenance required during tread wear life.

CARRIER ROLLER SHELL

Carrier rollers have shells forged from Deep Hardening Steel for strength, wear life and rebuildability.

Cat carrier rollers used Duo-Cone Seals for maintenance free operation.

Features• Heat treated shells for body strength and long wear life.• Shaft and bearings designed to carry and turn with heavy track weight.• Lifetime Lubricated for minimum maintenance.

NoteD8T and larger track-type tractors use a single flange track roller group as the carrier roller.

Carrier Roller Group

979

Product InformationIDLERS

IDLER ASSEMBLY

Functions• Guide the track in and out of the track rollers.• Intermittently support the machine’s weight.• Provide a way to control track slack and tension.

Requirements• Strength to resist failure before tread wear life is utilized.• Tread wear life equal to or greater than link wear life to service limits.• Treads and center flanges rebuildable.• No lubricant maintenance during original tread wear life.

Features• Tread hardness similar to links, track rollers and carrier rollers for impact strength and balanced wear life.• Lifetime Lubricated for minimum maintenance.• Rebuildable tread.

Cat offers cast, forged, and fabricated idler designs. The cast idler designs are hollow and single web. Thefabricated idler designs are straight side plate and curved side plate, each using a rolled tread and flange section.Internal reinforcing plates provide added strength.

All Cat® idlers have Duo-Cone Seals for Lifetime Lubrication. The idler needs no oil addition until it is rebuiltor replaced at wear limits. Idler treads may be rebuilt several times. Internal idler components, such as shaft andbearings are generally reusable.

IDLER TYPES

Model TypeD11R/N CastD10T/R/N CastD10 CastD9T/R/N CastD9L CastD9H FabricatedD8T/R/N CastD8L Cast245 CastD8K, 245 FabricatedD7R/H Cast & FabricatedD7G, 235 FabricatedD6T/R/H FabricatedD6D, 227 FabricatedD6N, D6M, D5H FabricatedD6K Sprocketed

Model TypeD5G, D5C, 939 ForgedD5B, 225 FabricatedD5N, D5M, D4H Cast & FabricatedD4E, 215 FabricatedD3G, D4G, D3, D4B, D4C Forged983 Fabricated977 Fabricated973 Fabricated963 Fabricated955 Fabricated951 Fabricated953 Fabricated943 Fabricated941 Fabricated931, 933, 935 ForgedAll Center Tread Idlers (CTI) Cast

Fabricated Idlers

Cast IdlerTypical Cast/Forged IdlerStraight Side Plate Curved Side Plate Center Tread Idler (CTI)

980

Product InformationGUARDS

TRACK ROLLER GUARDS

Functions• Protect the track, rollers and sprockets from rocks and debris.• Provide some additional tracking guiding assistance.

Cat track roller guards help prevent large rocks and other high strength debrisfrom jamming and being crushed between the track rollers, track and sprockets.This crushing could accelerate wear and damage components. Caterpillar offers twotypes of roller guards — full and partial. Both bolt to the roller frame.

The full length track roller guards cover the entire roller area. With full lengthguards, track guiding guards cannot be used. Full length track roller guards havebolt-on wear strips. See CTS Handbook for usage information.

Partial length track roller guards are designed to be used with end guiding guards. They protect the roller area while allowing the use of end guiding guards. See CTS Handbook for usage information.

TRACK GUIDING GUARDS

Cat offers three types of track guiding guards — end guiding guards, centerguiding guards, and full length guiding guards.

Function• Help align and guide the track in and out of the idler and the sprocket and through

the rollers.End Guiding Guard• Located at the front and rear of the track roller frame.• Helps guide the track as it enters and leaves the sprocket and idler.• Prevents link gouging by the sprocket during turning and sidehill operations.Segmented (Center) Guiding Guard• Located in the middle of the track roller frame.• Maintains track alignment.• Reduces link scuffing with other undercarriage components.• Allows packing material to fall free.Full Length Guiding Guard• Covers entire roller area.• Maintains track alignment.Cast Guards (Center and Full Length)• Strength.• Better pin coverage.

Cat track guiding guards have heat treated bolt-on wear strips. They can easilybe replaced to restore the worn surface without changing the entire guard assembly.

Full Length Guard

Partial Length Guard

Final Drive Guards

Rear Outer L.H. Rear Outer R.H.

Center GuardCenter Guard

Front Outer L.H .

Front Inner R.H.Front Inner L.H.

End Guiding Guard

Segmented (Center) Guiding Guard

Bolt-on Wear Strip

Full Length Guiding Guard

Front Outer R.H.

981

Product InformationPROPER TRACK SAG

PROPER TRACK SAG – MACHINES WITHOUT CARRIER ROLLERS

Model Inches mmD11R, D11N, D10 6.5" ± .40" (165 mm ± 10 mm)D10T, D10R, D10N, D9L, 589 6.1" ± .40" (155 mm ± 10 mm)D9T, D9R, D9N 5.1" ± .40" (130 mm ± 10 mm)D8T, D8R, D8N, 578, 583 T/R 4.5" ± .40" (115 mm ± 10 mm)D8L 5.5" ± .40" (140 mm ± 10 mm)D7R, D7H LGP, 527R 5.0" ± .40" (127 mm ± 10 mm)D7R, D7H, D6T, D6R, D6H, 527 4.5" ± .40" (115 mm ± 10 mm)517, D5H, D4H, 561M/H 3.9" ± .40" (100 mm ± 10 mm)

PROPER TRACK SAG – MACHINES WITH CARRIER ROLLERS

Model Inches mmD11R, D11N, D10 3.0" ± .40" (75 mm ± 10 mm)D10T, D10R, D10N, D9L, 589 2.8" ± .40" (70 mm ± 10 mm)D9T, D9R, D9N 2.6" ± .40" (65 mm ± 10 mm)D8T, D8R, D8N, 578, 583T/R 2.6" ± .40" (65 mm ± 10 mm)D8L 2.6" ± .40" (65 mm ± 10 mm)D7R, D7H, D7R/D7H LGP, 572R 2.6" ± .40" (65 mm ± 10 mm)D6T, D6R, D6H, 527 2.2" ± .40" (55 mm ± 10 mm)D6N, D6M, D5H, D6N/D6M/D5H LGP, 517 2.2" ± .40" (55 mm ± 10 mm)D5N, D5M, D4H, 561M/H 1.4" ± .40" (35 mm ± 10 mm)

PROPER TRACK SAG – HYDRAULIC EXCAVATORS

Inches mmModel Min Target Max Min Target MaxAll 200-Family series excavators 1.0 1.3 1.5 25.0 32.5 40.0All E-Family series excavators 1.6 1.85 2.1 40.0 47.5 55.0All 300-Family series excavators 1.6 1.85 2.1 40.0 47.5 55.05080, 5090B, 5130, 5130B, 5110B 1.6 1.85 2.1 40.0 47.5 55.0

PROPER TRACK SAG – SystemOne™ MACHINES WITH CARRIER ROLLERS*

Inches mmModel Min Target Max Min Target MaxD6T/R/H, D6N/M, D5H 1.6 1.80 2.0 40 45 50D5N/M, D4H 1.0 1.40 1.8 25 35 45

* If excessive track jumping occurs, run the track adjustment to the minimum side of track sag range, and/or changeor upgrade to new recoil spring.

982

Product InformationTRACK ROLLER FRAME EXTENSION

983

Conversion GuideINDEX

Conversion GuideMODELS PAGE NO.

DETERMINING COMPETITIVE UNDERCARRAIGE CONVERSIONS 984..................LINK ASSEMBLY 985...................................................................................................TRACK SHOE 988.........................................................................................................SPROCKET 989.............................................................................................................TRACK ROLLERS 991...................................................................................................CARRIER ROLLERS 994................................................................................................IDLERS 995....................................................................................................................

984

Conversion GuideDETERMINING COMPETITIVE UNDERCARRAIGE CONVERSIONS

DETERMINING COMPETITIVE UNDERCARRIAGE CONVERSIONS

To identify which Cat components can be used, and if modifications are required, to convert any track typemachine to Cat undercarriage components, refer to the following guidelines:

• Refer to guidelines on the following pages to determine what dimensions should be collected on thecompetitive machine to make a complete or partial conversion to Cat undercarriage.

• Use Conversion Report Form/Work Sheet PEEP0210, to collect dimensional data.

• Refer to IRM UC96-12, titled "Cat® Undercarriage Components Dimension Guide". This guide providesinformation to compare the dimensions of the competitive undercarriage with Caterpillar undercarriagecomponents for conversion purposes.

985

Conversion GuideLINK ASSEMBLY

LINK ASSEMBLY

Primary DimensionsPitch — ABushing O.D. — BRail Spread

Inside — COutside — D

Secondary DimensionsLink Height — EPin Length — FRail to Pin Boss — GRail to Bushing — HBolt Size — I

Other ConsiderationsNumber of Sections

PRIMARY DIMENSIONS

The primary dimensions are the critical dimensions to determine if a Catlink assembly can be used with the OEM sprocket and/or OEM rollingcomponents. Compare measurements to Cat link assembly dimensions,refer to IRM UC96-12. If measurements are within the ranges shown thenthe Cat link assembly may be used with the OEM sprocket and/or rollers.If measurements and Cat link dimensions are different, or conversion toCat sprockets and/or rollers is desired, sprocket and/or rollermeasurements must also be taken.

Pitch — APurpose: Determines OEM sprocket compatibility with Cat track.Range: ±.03" (.76 mm)Method: Track pitch (A) is the distance between pin centers in adjacent

track sections. Track pitch can be determined by measuring thedistance from one side of the pin to the same side of the pin inthe adjacent section.When measuring to determine OEM pitch on worn linkassemblies, you will need to adjust for an increase in track pitchdue to internal wear.

B

I

A

D

F

C

EHG

A

986


Bushing Outer Diameter (O.D.) — BPurpose: Determines OEM sprocket compatibility with Cat track.Range: -.12" (3.04 mm) without modifications

±.12" (3.04 mm) with modifications

Method: The bushing outer diameter measurement should be takenacross the unworn horizontal centerline of the bushing. In cases where the competitive track bushing is of smallerdiameter than the Cat track bushing, and where the competitivesprocket must be used, the new competitive sprocket rootshould be ground out to properly accommodate the largerdiameter bushing. This grinding should be done with thesprocket held in a fixture to achieve uniform profile and pitch.Failure to grind out the difference in radius can result inmismatch and accelerated bushing wear. Normal break-incannot be expected to relieve the difference without somedetrimental wear.

Rail SpreadInside — COutside — D

Purpose: Determines OEM rolling component compatibility withCat track.

Range: Inner — .0" to +.19" (4.83 mm)Outer — -.19" (4.83 mm) to +.0"

Method: The inside and outside rail spreads can be measured as shownat below.Note: As link assemblies wear, there will be a slight change ofrail spread. It does not significantly affect measureddimensions.Y

.06" (1.50 mm)

B

CAT

OEM

DC

OEM

987


SECONDARY DIMENSIONSThe secondary dimensions are less critical. Although they rarely prevent a conversion, modifications may benecessary in order to protect a complete Cat undercarriage system.

Link Height — EPurpose: Determines if machine height will be raised or lowered and affects number of sections required.

Pin Length — FPurpose: Determines if pin will clear guards or other machine parts.

Rail to Pin Boss — GPurpose: Determines material available for wear.

Rail to Bushing — HPurpose: Determines if link will clear idler, roller flanges, and provide maximum wear material without sacrificing

guidability, number of sections required.

Bolt Size — IPurpose: Bolt sizes need to be equivalent to ensure use of competitive shoe and proper fastener strength.

OTHER CONSIDERATIONSNumber of SectionsThe number of Cat track sections required should be determined from the number used on the competitive machine atthe time of conversion.

Assuming the sprockets and rolling components maintain relatively constant placement and sizes, the followingprocedure is usually accurate enough to determine the number of Cat sections required.

No. Sections of Cat = OEM Pitch (New) x No. Sections CurrentlyCat Pitch

Example: Calculations for converting a competitive 7.50" pitch 36-section machine to Cat® 8.00" pitch trackare as follows:

7.50" x 36 = 270 total inches of chain required on this machine. 270" 8.00" or 33.75 or 34 sections of Cat 8.00"pitch track required for conversion.

If link height and/or rail to pin boss clearance increases a large amount, the preceding formula may lead to a linkassembly that is too short.

I D

F

C

EHG

÷

988

Conversion GuideTRACK SHOE

TRACK SHOE

Primary DimensionsBolt Hole Spacing — A

— B— C

Bolt Size — D

Bolt Hole Spacing — A, B, CPurpose: Determines interchangeability of track shoes.Range: .0"Method: There are two methods of measuring shoe bolt spacing:

1. Measure a track shoe, by measuring from one side of a bolt hole to the same point of the hole adjacent2. Measure an assembled track group, by measuring from the center of the bolt head to the center of the

adjacent bolt

Bolt Size — DPurpose: Determines reuse of track shoes and/or track hardware.Range: .0"

Other ConsiderationsThe shoe leading and trailing edges must maintain proper clearance, especially if link pitch changes, to allow properassembly and operation.

C

B

A

D

989

Conversion GuideSPROCKET

SPROCKETPrimary Dimensions

Tip Diameter — ARoot Diameter — BInner Diameter — C

Other ConsiderationsOffsetSegment Hardware

PRIMARY DIMENSIONSUse these dimensions to determine if a Cat sprocket can be used on the competitive machine.

Tip Diameter — APurpose: Determines if machine interference will result from using Cat sprocket.Range: Not SpecifiedMethod: Measure the overall diameter of the sprocket. It may be helpful to mark the center of the hub or axle.

Then, using a 12" ruler extended from the tooth tip measure to the hub center with a tape measure.The most accurate sprocket measurements can be obtained after the track has been removed from themachine. Either too large or too small tip diameter can result in track or sprocket interference with othermachine components.

Root Diameter — BPurpose: Determines if sprocket will carry machine weight.

Range: Not Specified

Method: Measure the diameter of the (estimated) unworn sprocket roots. Thetrack bushings must increase elevation such that at the six o’clocksprocket position the bushing is above the level that it left the lastroller.

It may be necessary to use spacer plates on the competitive track roller frame to increase ground clearancewhen using a larger diameter Cat sprocket. This should lift the track roller frame at the bottom entryposition. Spacers may be fabricated from 1030 or 1020 steel. Full length spacer plates are recommendedand bolts should be checked for tightness at regular intervals.

Inner Diameter — CPurpose: Determines if there is adequate space and geometry for welding.

Range: Not Specified

Method: Measure the area that will facilitate welding. Use same procedure described above.

A C B

SPACER PLATE

990

Conversion GuideSPROCKET

OTHER CONSIDERATIONSOffsetThe Cat rim or adapter ring and segments may have a different offset than the OEM design. Failure tocompensate for the offset will result in sprocket-link interference.

Whether you use an adapter ring or a weld-on rim, the inner diameter must allow proper mounting and orientation onthe competitive sprocket “hub.”

When welding, the sprocket teeth must be in line with the track roller center line and the rim or segments must beclear of all other parts.

Segment HardwareAny additional clearances needed for segment hardware must be considered, especially if the sprocket runs close tofinal drive housings, guards, etc.

TAPER

TAPER

OEMSPROCKET HUB

CUT 1/2" LARGERTHAN INNER DIAMETEROF WELD ON ADAPTER CATERPILLAR

WELD ON ADAPTER

WELD

WELD

WELD

SEGMENTS

OFFSET ON THE HUB TOCENTER SEGMENTSWITH ROLLER

WELD ADAPTER

HUB

CUT 1/2"LARGER

991

Conversion GuideTRACK ROLLERS

TRACK ROLLERS

Primary DimensionsTread Diameter — ATread

Inside — COutside — D

Mounting Width — ERoller Frame to Tread Surface — IWidth Between Bolt Centers — FBolt Hole Spacing — H

Other ConsiderationsFlange Diameter — BBolt Size — GRoller Spacing

PRIMARY DIMENSIONS Use these dimensions to determine if Cat link assemblies will fit on thecompetitive track rollers.

TreadInside — COutside — D

Purpose: Determines Cat link assembly compatibility with OEM track rollers.Range: Outside — .0" to +.19" (4.83 mm)

Inside — .19" (4.83 mm) to +.0"

Method: Measure from inside flange to inside flange and outside flange tooutside flange. Measurements from worn rollers will result in slightlyinaccurate dimensions. If clearances appear to be close compensationfor wear may be needed. Note: Be sure to compare thesemeasurements to the link assembly intended for use in theconversion.

B

E G

I

A

F

H

D

C

OEM

DC

CAT

992


Use these dimensions to determine if Cat track rollers can be used on thecompetitive machine.

Mounting Width — EPurpose: Determines if Cat rollers will fit in OEM frame.Range: -.10" (2.54 mm) to +.0" (.0 mm)Method: Measure the OEM track roller frame and compare to Dimension E on

the Cat roller.Note: Failure to maintain a clearance between the roller frame androller end collar vertical faces may cause roller damage.

Roller Frame to Tread Surface — IPurpose: Determines if Cat roller lowers or raises machine.Range: Depends on roller wear limits, idler and sprocket placement.Method: Differences in tread diameter or end collar design can result in slightly

raising or lowering overall height of machine. This can cause trackinterference with frame, guards or cause sprocket to carry some machineweight. Frame to tread surface (Dimension I) should be measured andany potential interference compensated for as necessary on a case bycase basis. If required, roller frame spacers can be used.

CAT

E

OEM ROLLERFRAME

CATI

993


Width of Bolt Centers — FBolt Spacing — HPurpose: To determine use of existing bolt pattern.Range: ± .01" (.254 mm)Method: Measure from the center to center point of bolts in track roller

frame. For comparison, use Cate dimensions as reference.If patterns are not within range, plugging, drilling, and tappingof the competitive roller frame may be needed.

OTHER CONSIDERATIONS

Flange Outer DiameterTwo points to check are (1) roller flange to link pin boss clearance, and (2)roller flange and track frame interference.

Bolt SizeIf bolt size and tread type are similar, reuse of competitive hardware maybe possible.

Roller SpacingIf the Cat roller selected has different tread, flange diameters and/or rollerframe to tread surface dimensions, be sure to compensate for these toprevent idler/sprocket interference, especially on the front and rear roller.

Shaft and End Collar Design(flat shaft mounting vs. round shaft mounting)For example, Cat D8 and D9 size track rollers utilize a full round shaftmounting which requires a saddle type cutout in the roller frame(Illustration B). D8 size roller conversion can use 983 rollers which domount flat as in Illustration A. However, D9 roller conversion will requirea roller frame saddle arrangement.

F

H

ROLLER FRAME ROLLER FRAME

SIMILAR TO CATD8 & D9

FULL ROUND SHAFT FLAT SHAFT

ILLUSTRATION B ILLUSTRATION A

994

Conversion GuideCARRIER ROLLERS

CARRIER ROLLERS

Primary DimensionsTread Inside — ATread Outside — BShaft Outer Diameter — CReference Dimension — D

Other ConsiderationsShaft Mounting Length — EDowel

SpacingSize

PRIMARY DIMENSIONS Use these dimensions to determine if Cat link assemblies can be used on the competitive carrier roller.

TreadInside — AOutside — B

Purpose: Determines link assembly compatibility with carrier rollers.Range: Inside — .19" (4.83 mm) to +.0"

Outside — .0" to +.19" (4.83 mm)Method: Measure from inside flange to inside flange and outside flange to outside flange. Measurements from worn

rollers will result in slightly inaccurate dimensions. If clearances appear to be close compensation for wearmay be needed. Note: Be sure to compare these measurements to the link assembly intended for use in theconversion.

Use these dimensions to determine if Cat carrier rollers can be used on the competitive machine.

Shaft Outer Diameter — C

Purpose: Determines compatibility of Cat roller shaft with competitive carrier roller holder.Range: As small as competitive roller holder will hold. As large as competitive roller shafts.Method: Measure competitive shaft with calipers, compare to Cat roller; if Cat roller is smaller, a sleeve may be

fabricated to compensate for small diameter.Reference Dimensions — DPurpose: Determines compatibility of Cat carrier roller with competitive carrier roller holder and link assembly.Range: ±.10" (2.54 mm) depends on tread inside and competitive holders.Method: Measure from radius to holder to determine reference dimension. The reference dimensions assure proper

carrier roller alignment with the link assembly.


Shaft Mounting Length — EThe Cat carrier roller shaft may have a longer or shorter shaft mounting length, providing it does not interfere withthe holder or other components.

Dowel Spacing and SizeThe dowel spacing and size may need to be moved or resized; many times this is accomplished by drilling new holesin the competitive holder.

A

B E

C

D

995

Conversion GuideIDLERS

IDLER

Primary DimensionsTread Diameter — ATread Inside — BTreadOutside — CMounting Shaft Diameter — D

Other ConsiderationsSlide Plate Profile

PRIMARY DIMENSIONS Use these dimensions to determine if Cat link assemblies can be used on the competitive idlers.

Tread Diameter — A

Purpose: Determines link assembly compatibility with idler.Range: Slightly smaller than OEM up to OEM diameter.Method: Measure the diameter; compensate for wear as much as possible.

TreadInside — BOutside — C

Purpose: Determines link assembly compatibility with idler.Range: Inside — .19" (4.83 mm) to +.0"

Outside — .0" to +.19" (4.83 mm)Method: Measure from inside flange to inside flange and outside flange to outside flange. Measurements from worn

rollers will result in slightly inaccurate dimensions. If clearances appear to be close compensation for wearmay be needed. Note: Be sure to compare these measurements to the link assembly intended for use in theconversion.

Use these dimensions to determine if Cat carrier rollers can be used on the competitive machine.

Mounting Shaft — D

Purpose: Determines use of OEM mounting block.Range: Same shaft O.D., same mounting arrangement.Method: Compare Cat shaft O.D., length and mounting type with competitive idler. Modification to OEM mounting

block may permit use of Cat idler.


Side Plate ProfileSome manufacturers use guards that run close to idler side plates; modification may be needed to avoid interference.

D

CB

A

996

Part Number IndexSORTED BY PART NUMBER

PARTNumber

PAGENUMBER

002-1212 916, 917

006-7231 948, 949, 952, 953, 956,957

006-7232 948, 949, 952, 953, 956,957

006-8663 913

027-3873 258, 295, 296

031-0221 332, 334, 459, 513

031-1382 204

031-3185 201, 202

031-6100 957

031-9099 777, 794

034-0707 164

053-2294 12, 13, 14, 16, 17, 47, 52,226, 238, 298, 937, 938

068-6405 916

085-4972 865

085-4973 864

085-5519 839

085-8893 891, 898

085-9311 859

085-9768 902

086-3096 868

086-8706 942

086-8710 942

086-8712 942

086-9627 939

086-9722 939

086-9723 939

087-8805 856

087-8806 856

093-0036 606, 837

093-0037 614, 617, 618, 619

093-0042 849

093-0043 857, 858, 862

093-0044 866

093-0045 869

093-0233 868

093-0245 865

093-0259 841, 842, 847, 850, 860

093-0261 841, 842, 847

093-0262 849

093-0264 849

093-0265 861

093-0266 857, 858, 862

093-0268 866

093-0271 869

093-0319 847

093-0320 849

PARTNumber

PAGENUMBER

093-0321 857, 858, 861, 862

093-0323 869

093-0394 868

093-0502 857, 858, 862

093-0509 849

093-0510 866

093-0515 606, 837

093-0517 606, 837

093-0521 849

093-0522 857, 858, 862

093-0523 866

093-0524 869

093-1364 609, 610, 611, 935

093-1413 850, 859, 864

093-1414 609, 610, 611, 840, 935

093-1415 838

093-1416 867, 870

093-1418 863, 867, 868

093-1420 871

093-1693 850, 859

093-1694 863

093-1697 844

093-1701 838

093-1736 864

093-1837 848

093-1839 838

093-1841 864, 865

093-1843 863

093-1844 844, 846, 848

093-1845 850

093-1848 859

093-1849 850, 860

093-1887 614, 616, 618, 619

093-1890 849

093-1891 849

093-1892 866

093-1893 866

093-1894 869

093-1895 869

093-1927 849

093-1935 608, 837

093-1946 849

093-1947 849

093-1949 862

093-1950 862

093-1951 862

093-1952 862

093-1969 606, 837

PARTNumber

PAGENUMBER

093-1970 606, 837

093-1979 849

093-1980 857, 858, 862

093-1981 857, 858, 862

093-1985 869

093-1999 849

093-2000 849

093-2011 869

093-2012 869

093-2027 840

093-4333 839

093-6937 848

093-6946 845, 848

093-8747 846, 848

093-9275 860

093-9871 863

093-9886 864, 865

094-0548 850, 859

094-0563 850, 859, 864

094-1384 859

094-1388 850, 860

094-1782 860

094-2491 863

094-2576 863

094-3709 698, 708, 709, 714

094-4829 871

094-4846 869

094-6105 867

094-6133 866

094-6386 859

094-6391 865

095-0818 838

095-0819 851, 860

095-0820 865

095-0863 593, 614, 615, 616, 617,618, 619, 624, 625, 631,632, 636, 637, 638, 639,643, 644, 646, 662, 663,841, 842, 847, 852, 855,

856

095-0867 861, 866

095-0928 850, 859, 864

095-0966 839, 840, 845, 846, 848

095-0967 850, 854, 860, 864, 865,868

095-0990 902, 903

095-1279 611, 903

095-1533 840

095-1541 611, 838, 903

095-1545 844, 846, 848

997


PARTNumber

PAGENUMBER

095-1549 850, 859

095-1551 863

095-1553 867

095-1557 870

095-1578 865

095-1595 895, 896

095-1600 609, 610, 611, 838, 902,935

095-1657 898

095-1658 838, 839

095-1659 613, 839, 935

095-1662 621, 844

095-1663 839, 850, 854, 859, 864

095-1673 871

095-1674 867, 870

095-1681 845

095-7099 850, 860

095-7100 844

095-7119 857, 858, 862

095-7120 857, 858, 862

095-7123 858

095-7130 849

095-7138 850, 860

095-7412 849

095-7944 656, 666, 676, 677, 678,691, 692

095-7962 896

095-9779 859

096-0094 861

096-0231 619, 842, 847

096-0240 619, 842

096-0241 861

096-0244 861

096-0251 871

096-0253 863

096-0257 862

096-0263 861

096-0264 861

096-0305 871

096-0330 864

096-0551 857, 858

096-0586 866

096-0655 846, 848

096-0883 848, 850, 859, 864, 865

096-1043 847

096-1479 843

096-2052 851, 860

096-2142 606, 837

096-2143 606, 837

PARTNumber

PAGENUMBER

096-2144 837, 838

096-4255 714

096-4279 627, 633, 641, 649, 669

096-4280 853

096-4327 852

096-4883 897, 899

096-5251 858

096-5256 857, 858, 862

096-5259 857, 858, 862

096-5260 850, 859, 864

096-6783 935

096-7011 866

096-7033 599, 600, 601, 602, 603,604, 605, 606, 607, 837,

934

096-7698 848

096-8047 847

096-9296 891

096-9944 866

096-9945 866

096-9946 866

096-9947 866

099-0156 844

099-0157 621, 844

099-0159 621, 844

099-0160 621

099-0163 621

099-0182 844

099-0183 621, 844

099-0185 621, 844

099-0187 844

099-0193 622

099-0194 622

099-0195 622, 845

099-0219 843

099-0653 614, 616, 617, 618, 619,841, 842, 847

099-1460 853

099-1461 853

099-2658 861

099-2668 851, 860

099-3220 843

099-4129 863

099-4150 865

099-4329 840

099-4347 846

099-4739 621

099-5200 871

099-5554 861

PARTNumber

PAGENUMBER

099-5996 861

099-5998 861

099-5999 861

099-6008 861

099-6461 611, 838, 903

099-6462 611, 903

099-6463 611, 838, 903

099-7241 864, 865

100-3205 739

101-2160 725, 731

101-2162 725

101-7402 895

102-0883 729

102-3585 293, 442

102-3587 293, 442

102-5920 287, 439

102-5921 287, 439

102-6680 177

102-6683 194

102-6685 164

102-8072 606, 837

102-8073 606, 837

102-8077 606, 837

102-8079 611, 903

102-8082 610, 611, 935

102-8084 610, 611, 935

102-8107 606, 837

102-8108 606, 837

102-8115 612, 613, 935

102-8116 612, 613, 935

102-8134 626, 633, 640

102-8150 608

102-8151 853

102-8152 697, 884, 887

102-8155 658, 684

102-9920 285

104-3494 173

104-4122 438, 439

104-4129 439

104-4130 439

104-8170 850

104-8576 173

104-8577 173

105-0929 314, 449

105-0930 314, 449

105-3484 890

105-4125 306

105-5013 936

998


PARTNumber

PAGENUMBER

105-6203 725

105-6324 702, 703, 712

105-8884 947, 951

106-0458 829

106-0614 647, 666

106-0615 647, 666

106-0616 647, 666

106-1602 43

106-1603 43

106-1604 43, 236

106-1605 43

106-1607 43, 209, 236

106-1608 43, 236

106-1609 236

106-1610 42, 209, 235

106-1611 43

106-1612 43, 236

106-1613 43, 209, 236

106-1615 43

106-1616 43

106-1617 43, 236

106-1618 35, 36, 208, 232, 477, 645,875

106-1622 44, 209

106-1624 44, 209

106-1625 35, 36, 42, 208, 209, 232,235, 477, 645, 875

106-1626 35, 36, 42, 208, 209, 232,235, 477, 645, 875

106-1627 35, 36, 37, 38, 42, 208,209, 232, 235, 477, 478,

645, 875

106-1628 35, 36, 37, 38, 42, 208,209, 232, 235, 477, 478,

645, 875

106-1629 35, 36, 42, 208, 209, 232,235, 477, 645, 875

106-1630 35, 36, 42, 208, 209, 232,235, 477, 645, 875

106-1634 35

106-1635 36, 477

106-1636 35, 42

106-1637 36

106-1638 208, 209, 232, 235

106-1642 35, 36, 37, 38, 42, 208,209, 232, 235, 477, 478,

645, 875

106-1646 36

106-4370 57, 58, 243

106-4371 57, 58, 243

106-4372 58, 242, 243

106-4373 58, 242, 243

PARTNumber

PAGENUMBER

106-4402 58, 242, 243

106-7691 79, 80, 84, 85, 86, 87, 210,218, 237

106-8235 74, 216

106-8237 74, 216, 798

106-9187 258, 259, 260, 434

106-9563 61

106-9564 61

106-9982 64, 243

107-0356 738

107-0669 722

107-0707 236

107-0708 236

107-0709 236

107-0710 236

107-0713 43

107-0714 43

107-0715 43

107-0716 43

107-0717 35

107-0718 35

107-0719 35, 36, 37, 38, 42, 208,209, 232, 235, 477, 478,

645, 875

107-0720 42, 209, 235

107-1036 739

107-2631 242

107-2632 242

107-2644 212, 229, 242, 243

107-2645 212, 229, 242, 243

107-3944 173

107-3945 79, 84, 85, 86, 87, 120,121, 122, 123, 128, 129,157, 166, 173, 218, 379

107-3946 150, 151, 154, 155, 165,171

107-3947 150, 151, 154, 155, 165,171, 189

107-3953 720, 724, 730

107-4057 150, 151, 152, 153, 154,155, 165, 171, 172, 189

107-4888 152

107-4889 120, 121, 122, 123, 124,125, 126, 127, 157, 166,

172, 173

107-5715 61

107-5716 61

107-5721 64, 65, 244

107-8040 171

107-8084 157, 166

107-8085 157, 166

107-9620 185, 187

PARTNumber

PAGENUMBER

108-0041 129, 130, 131

108-0809 60, 61

108-0812 64

108-0943 5, 222

108-0944 5, 222

108-0946 11, 225

108-0947 5, 10, 222, 224

108-0948 5, 10, 222, 224

108-0949 5, 6, 222, 292, 442

108-0950 5, 6, 222, 292, 442

108-0951 5, 222

108-0952 5, 222

108-0953 5

108-0954 5, 10, 222, 224

108-0955 5

108-1136 12, 13, 16, 17, 47, 52

108-1138 12, 13, 15, 16, 17, 47, 51,52

108-1578 287

108-1579 287

108-2187 920, 921, 922, 923, 924,925, 927, 928, 929, 930

108-2622 5

108-2625 6

108-2639 10, 224

108-2640 10, 224

108-3297 229

108-3298 229

108-3302 229

108-3303 229

108-3990 24

108-3995 24

108-3998 24

108-4002 24

108-4016 26, 28

108-4017 26, 28

108-4022 31, 231

108-4030 26, 28

108-4031 26, 28

108-4033 26, 28

108-4036 26, 28

108-4250 24

108-4605 713

109-0058 22

109-0059 22

109-0060 22

109-0061 22

109-0478 292, 442

109-0486 292, 442

999


PARTNumber

PAGENUMBER

109-0487 292, 442

109-0488 292, 442

109-0489 292, 442

109-0861 719, 723

109-0868 698, 708, 709, 714

109-0881 697, 698, 715, 884, 887

109-0885 295, 296, 658, 668, 669,683, 684, 876, 877, 881

109-1708 229

109-1709 229

109-3229 57

109-3230 57

109-6488 932

109-8014 178, 185

110-0771 105, 106

110-2976 35

110-2978 35

110-3118 739

110-3119 739

110-3362 45, 46, 47, 52, 238

110-6124 51

110-6968 25, 26, 27

110-6969 58, 59, 60

111-0104 630

111-0105 630

111-0106 629, 635

111-0423 141

111-0428 138, 139, 141

111-0429 138, 139, 141

111-0431 141

111-0437 138

111-0443 139

111-0446 139

111-1522 249, 427, 946, 950, 954

111-1729 150, 154

111-1730 150, 155, 165

111-2414 923, 930

111-2415 923, 930

111-8207 958

112-8136 480

112-8139 480

112-8980 442

112-9951 658, 668, 683, 684, 876,877, 881

113-0693 920, 921, 922, 923, 924,925, 927, 928, 929, 930

113-1047 734

113-2907 633, 640, 648

113-4189 608

PARTNumber

PAGENUMBER

113-5880 737

113-5883 737

113-5890 738

113-5891 738

113-5894 738

113-5896 738

113-5900 740

113-5901 740

113-5902 740

113-5903 740

113-5905 741

113-5912 741

115-0605 813

115-1145 194

115-1147 164

115-1176 177

115-1853 656, 666, 676, 677, 678

115-1854 656, 666, 676, 677, 678

115-2438 5, 222

115-2439 35, 36, 208, 232, 477

115-2440 69, 214, 358

115-3328 43, 236

115-3329 43, 236

115-3330 43, 236

115-3331 43, 236

115-3696 658, 668, 683, 876, 877

115-3697 658, 668, 683, 684, 876,877, 881

115-3699 697, 698

115-3701 633, 640, 648

115-4923 113, 377

115-4924 113, 377

115-4926 627, 633, 640, 853

115-4931 668, 669

115-5198 608

115-5756 607

115-6301 113, 377

115-6302 113

115-6303 113

115-6307 114

115-6308 114

115-6310 114

115-6312 114

115-6314 114

115-6315 118

115-6335 610, 611

115-6336 610, 611

115-6337 668

PARTNumber

PAGENUMBER

115-6338 668

115-6359 723

115-6370 698, 708, 709

115-7462 118

115-7471 658, 668, 683, 684, 876,877

115-9254 948, 952

116-6698 89, 219, 526

116-6702 89, 371, 372, 510, 526,528, 803, 804, 821

116-8145 113

116-8545 77

116-8548 77

117-0519 236

117-0520 236

117-0615 43, 209, 236

117-0616 43, 209, 236

117-0756 118

117-1020 352

117-1022 357, 501

117-1023 517

117-1024 384, 590

117-1027 384

117-1371 624, 625, 631, 639, 646,662, 663, 852, 856

117-1372 624, 625, 631, 632, 638,639, 643, 644, 646, 662,

663, 852, 856

117-1616 364

117-1617 364, 588

117-1771 619

117-3068 813

117-4855 608

117-5418 674

117-5553 635, 642, 674

117-5612 660, 661, 688, 689

117-8880 607, 934

117-8881 605, 607, 934

117-8882 605, 607, 934

117-8883 605, 607, 934

117-8884 607, 934

117-8885 605, 607, 934

117-9748 89, 219, 526

118-1608 331, 458, 466, 775, 793,945

118-1609 331, 458, 466

118-1610 331, 458, 466, 775, 793,945

118-1611 347, 373, 473, 511, 585,792

118-1612 347, 373, 473, 511, 585

1000


PARTNumber

PAGENUMBER

118-1613 347, 373, 473, 511, 792

118-1614 372, 510, 589, 804, 821

118-1615 372, 510, 589

118-1616 331, 458, 466, 775, 793,945

118-1617 371, 528, 589, 803

118-1618 371, 528, 589

118-1619 396, 569, 592

118-1620 396, 569, 592

118-1623 395, 547, 568, 592, 819

118-1625 395, 547, 568, 592

118-1628 134, 395, 396, 544, 545,547, 568, 569

118-1630 395, 547

118-1631 395, 547

118-1634 371, 510

118-1635 371, 510

118-1636 395, 568

118-1637 395, 568

118-3539 443

118-7302 691, 692

118-7303 691, 692

119-4553 660, 661, 688, 689

119-4554 660, 661, 688, 689

120-4660 902, 903

120-5753 89, 219, 526

120-5767 89, 219, 526

120-5785 89, 219, 526

120-5804 89, 219, 526

120-7027 958

121-0133 639, 647, 666

121-0134 647, 666

121-0135 647, 666

121-0137 682

121-0138 682

121-0140 696

121-0141 696

121-0824 55, 240, 488

121-0825 55, 211, 239, 240, 488

121-0827 55, 240, 488

121-0828 55, 211, 239, 240, 488

121-0830 55, 240, 488

121-0831 55, 239, 240, 488

121-0834 55, 211, 239, 240, 488

121-1257 55, 211, 239, 240, 488

121-1258 134, 544, 545

121-5394 736

121-5395 736

121-5907 170

PARTNumber

PAGENUMBER

121-7351 733

121-7371 733

121-7373 733

122-0216 372, 821

122-0217 372

123-0025 691, 692, 693, 694

123-0026 691, 692, 693, 694

123-1186 577, 835

123-1188 577

123-1190 577

123-1191 577, 835

123-1216 732

123-1227 733

123-1256 734

123-1273 734

123-1382 710, 711

123-1813 606

123-5540 725

123-5541 725

123-5554 725

123-5555 725

123-8064 113

124-3296 708

124-7276 710

124-7278 710

124-8237 19, 20, 227, 300, 446, 464,940

124-8238 19, 20, 227, 300, 446, 464,940

124-8240 19, 20, 227, 300, 446, 464

124-8241 19, 20, 227, 300, 446, 464

124-8243 19, 20, 227, 300, 446, 464

124-8244 19, 20, 227, 300, 446, 464

124-8248 19, 20, 227, 300, 446, 464,940

124-8251 134, 544, 545

124-8255 134, 544, 545

124-8259 134, 545

124-8262 134, 545

124-8267 134, 544, 545

124-8468 736

124-8469 736

124-8470 736

124-8473 736

124-9978 698, 708

124-9979 698, 708, 709

125-3250 937, 938

125-3537 185

125-4655 171

PARTNumber

PAGENUMBER

125-5163 77

125-5167 77

125-7765 957

125-7766 957

125-7768 957

125-7769 957

125-7877 740

125-7878 734

125-7879 734

125-9087 119, 540

125-9088 119, 540

125-9380 732

125-9381 732

125-9382 732

125-9383 732

125-9384 732

126-4968 733

126-4969 733

126-4970 733, 737

126-4971 733, 737

126-4975 733, 737

126-4976 733, 737

126-4977 733, 737

126-5061 593, 625, 632, 639, 647

126-5062 593, 625, 632, 639, 647

126-5063 625, 632

126-5064 682

126-5065 682

126-5066 696

126-5067 696

126-5304 657

126-5305 657

126-5343 197, 199

127-0103 212, 213, 220, 221

127-0159 734

127-0181 734

127-0204 734

127-3804 612, 613, 935

127-3805 612, 613, 935

127-3806 612, 613, 935

127-3807 613

127-4834 882, 885, 888

127-4835 154

127-6254 236

127-6255 236

127-7009 77

128-5604 113

128-7743 540

1001


PARTNumber

PAGENUMBER

128-7744 540

128-8829 577

128-9473 272, 437

128-9474 272, 437

128-9545 272, 274, 437

128-9546 272, 274, 437

128-9555 270, 271, 272, 273, 274,275, 437

128-9693 185

129-2977 239

129-2978 239

129-5029 544

129-5030 544

129-5036 97

129-5037 97

129-8552 957

129-9204 118

130-1428 270, 271, 272, 273, 274,275, 437

130-1433 270, 271, 272, 273, 274,437

130-1437 270, 271, 272, 273, 274,275, 437

130-4499 712

130-5333 707, 806, 807

130-5334 707, 806, 807

130-5641 182

130-6606 708

130-7786 220

130-7787 220

130-7788 220

130-7789 220

130-7790 220

130-7791 220

130-7794 220

130-9285 671

130-9326 609

131-1568 275, 276

131-1569 275, 276

131-1647 120, 121, 122, 123, 124,125, 126, 127, 129, 130,

131, 132

131-1649 178, 195

131-1650 159, 165, 179, 189

131-1651 156, 157, 158, 166, 173

131-1911 275

131-2466 275

131-3932 121, 123, 129

131-3935 120, 121, 122, 123, 124,125, 126, 127, 128, 129

131-7083 739

PARTNumber

PAGENUMBER

131-7239 19, 20, 227, 300, 446, 464,940

131-8207 120, 121, 122, 123, 124,125, 126, 127

131-8742 55, 211, 239, 240, 488

131-9352 55, 239, 240, 488

132-1334 43

132-1336 43

132-1951 19, 20, 227, 300, 446, 464,940

132-1998 947, 951

132-3546 934

132-3829 305, 448

132-3830 305, 448

132-3831 268, 303, 305, 448

132-3832 268, 303, 305, 448

132-3849 305, 448

132-3861 268, 303, 304, 305, 448

132-4676 304, 305, 448

132-4677 304, 305, 448

132-4912 305

132-5794 703

132-6615 272, 274, 275, 276, 437

132-6622 272, 274, 275, 276, 437

132-6625 305, 448

133-0246 77, 216

133-0247 77, 216

133-0248 77, 216

133-0249 77, 216

133-0250 78, 216

133-0251 78, 216

133-0252 78, 216

133-0253 78, 216

133-2504 701

133-2554 623, 846

133-2890 77

133-3843 708

133-9599 274, 275

133-9600 274, 275

134-5364 101, 103

134-5365 101, 103

134-5366 98, 99, 100, 101, 102, 103,104, 111

134-5368 98, 99, 100, 101, 102, 103,104, 111

134-6091 220

134-6092 220

134-6093 212, 213, 220, 221

134-6094 220, 221

134-6403 102, 104

PARTNumber

PAGENUMBER

134-6404 102, 104

134-6638 544

134-7697 608

134-9431 102, 104

134-9432 102, 104

134-9434 101, 103

134-9435 101, 103

134-9929 101, 103

134-9930 101, 103

135-8903 714

135-8904 723

135-8920 714

136-0296 612, 613, 935

136-0297 612, 613, 935

136-0351 620

136-1090 947, 951

136-1135 947, 951

136-2394 611, 903

136-2400 607

136-2401 599, 600, 601, 602, 603,604

136-2402 599, 600, 601, 602, 603,604

136-2403 604

136-2404 599, 600, 601, 602, 603,604

136-2405 599, 600, 601, 602, 603,604

136-2407 599, 600, 601, 602, 603,604

136-2409 599, 600, 602, 604

136-2410 599, 600, 601, 602, 603,604

136-2422 697

136-2429 719

136-2446 719

136-3056 708

136-3847 697, 884, 887

136-4188 187, 202

136-6713 146

136-9349 239

137-3301 316

137-3384 194

137-4123 639, 646, 662, 663

137-4124 656, 657, 677, 678, 679,680

137-4125 691, 692, 693, 694

137-6114 619

137-9518 12, 13, 14, 16, 17, 226,937, 938

138-1721 219

1002


PARTNumber

PAGENUMBER

138-1725 218

138-1726 218

138-1934 309, 449

138-1935 309, 449

138-1936 278, 437

138-1937 278, 437

138-1945 278, 279, 309, 310, 437,449

138-1946 278, 279, 280, 308, 309,310, 437, 449

138-4330 194

138-4331 201

138-5773 70

138-5774 77

138-7761 160

138-7762 160

138-7763 160

138-8388 723

138-8389 714

138-9378 171

138-9692 278

138-9693 278

138-9694 279

138-9695 279

138-9696 310

138-9697 310

138-9712 150, 155, 159, 165

139-0246 696

139-0617 170

139-2011 205

139-2015 205

139-2016 205

139-2019 205

139-4304 890

139-6261 891

139-6270 890

139-6364 890, 896

139-6411 901

139-8193 608

139-8194 608

139-9015 530, 531

139-9016 530, 531

139-9019 531

139-9020 531

140-0291 178

140-3048 702, 703, 712

140-4005 896

140-4008 896

140-4022 895

PARTNumber

PAGENUMBER

140-4313 899, 905

140-4314 899, 905

140-4338 897, 898

141-2697 719

141-3245 934

141-9655 718

142-1365 358

142-1803 716, 717

142-1804 716, 717

142-1806 716

142-2803 178, 185

142-2805 185, 187

142-4412 741

142-4413 741

142-4414 741

143-0746 192, 193, 732

143-4891 713, 883

144-0805 716, 717, 718

144-0806 716, 717, 718

144-8092 275

144-8093 275

144-8094 275

144-8095 275

144-8598 718

144-8602 718

145-2295 720

145-2948 607

145-2949 604

145-2950 607

145-2951 604

145-2952 604

145-2953 604, 607

145-2970 718, 728

145-5181 276, 277, 283, 307, 308

145-7132 60

145-7133 60

145-7134 60

145-7135 60

145-9320 713

146-0020 214, 216

146-0984 896

146-0985 896

146-3584 189

146-5126 201

146-5132 48, 49

146-6062 892

146-6064 897

146-9174 616

PARTNumber

PAGENUMBER

146-9175 616

147-0423 616

147-5330 190

147-5331 190

147-5332 190

147-5333 190

147-6879 212

147-6880 212

148-2465 208, 209

148-2487 43, 209, 236

148-2494 43, 209, 236

148-2594 43, 209, 236

148-2596 43, 209, 236

148-2720 221

148-2721 221

148-3095 721

148-3111 721, 731

148-3531 316

148-3533 298, 316, 699, 700, 701,884, 885, 887, 888

148-5072 276

148-5073 276

149-1049 211

149-1050 211

149-1051 211

149-1054 210

149-1056 210

149-2494 79, 80, 84, 85, 86, 87

149-2495 79, 84, 85, 86, 87, 218

150-0392 739

150-0394 739

150-0396 739

150-1989 212

150-1990 212

150-4373 292, 442

150-4419 616

150-4741 695, 696, 704, 706, 886

150-4742 695, 696, 704, 705, 706

150-4764 707

150-4766 707

150-4767 707

150-4768 707

150-4769 707

150-4770 707

150-7865 880, 881

150-7866 881

151-0924 213

151-0925 213

1003


PARTNumber

PAGENUMBER

151-0926 212, 213

151-8863 115

151-9748 622

152-3421 81, 82, 84, 85, 86, 87, 218

152-4140 701

152-4142 715

152-4144 724

152-4147 715

152-4149 724

152-7146 308, 309

152-7182 267, 306, 447

152-7183 267, 306, 447

152-8038 6

152-8039 6

152-8040 6

152-8041 37

152-8043 37

152-8044 38, 478

152-8045 38

152-8047 37

152-8048 71

152-8049 71

152-8050 71

152-8053 71

152-8054 115, 538

152-8055 115

152-8057 115

152-8069 5, 6, 222, 292, 442, 875

152-8070 35, 36, 37, 38, 208, 232,477, 478, 645

152-8071 69, 71, 72, 73, 214, 215,351, 358, 495, 516, 665,

681, 682, 879, 880

152-8073 113, 115, 116, 117, 143,144, 146, 162, 163, 377,378, 383, 534, 536, 538,

553

152-8075 6, 292, 442

152-8080 115, 378, 538

152-8555 882, 885, 888

152-8558 883

152-8570 885, 888

152-8628 667, 875

153-1624 711

153-3901 159

153-5044 81, 82, 83

153-5981 900

153-5982 892

153-5985 894

154-3298 150, 151, 152, 153, 154,155, 159, 165

PARTNumber

PAGENUMBER

154-3306 189

154-3307 150, 151, 152, 153, 154,155, 165

154-3308 185, 186, 187

154-3309 171, 172

154-3644 427

154-3645 427

154-3646 427

154-3647 450, 461

154-3652 319

154-3654 293, 319, 450, 460, 461

154-3656 319

154-3657 319

154-3659 335, 338, 359, 360, 468,470, 479, 502, 558

154-3660 249, 251, 426, 427, 429,946, 950, 954

154-3661 460

154-3662 338, 470, 583

154-3664 9, 223, 293, 319, 450, 460,461

154-3667 502, 583

154-3672 335, 360, 468, 502

154-3676 335, 583

154-3677 479

154-7311 208, 232

155-2048 204

155-2742 160

155-2754 159, 160

155-4102 738

155-4103 738

155-4105 738

155-4106 738

155-4107 741

155-4109 741

155-4111 741

155-4112 741

155-6844 901

155-7420 707

155-8399 212

155-8400 212

155-9879 201, 202

156-4653 201, 202

156-4701 37, 38, 478

156-5342 81, 82, 83

156-5351 201, 202

156-8357 201

157-1373 77

157-1374 77, 78, 363

157-1606 711

PARTNumber

PAGENUMBER

157-4292 177

157-4293 194

158-4380 593, 624, 625, 631, 632,636, 637, 638, 643, 644,

662, 663, 855

158-4381 593, 624, 625, 631, 632,636, 637, 638, 643, 644,

662, 663, 855

158-4675 894

158-4676 893, 894

158-4677 893, 894

158-4678 893, 894

158-4679 893, 894

158-4680 893, 894

158-4681 893, 894

158-4682 893, 894

158-4683 893, 894

158-4684 893, 894

158-4712 904

158-4713 904

158-4714 904

158-4766 901

158-4767 900, 901

158-4768 900, 901

158-4769 900, 901

158-4770 900, 901

158-4771 900, 901

158-4772 900, 901

158-4773 900, 901

158-4774 900, 901

158-4775 900, 901

158-4776 900, 901

158-4777 901

158-4795 902

158-7908 711, 715

158-7910 724

158-7913 711

158-7915 715

158-7918 724

158-8086 659, 660, 670, 671, 672,673, 685, 686, 687, 878,

882

158-8087 700, 701

158-8089 687

158-8090 700, 701

158-8096 659, 670, 671, 685, 686

158-8097 700, 701

158-8098 711, 715

158-8099 724

159-0049 612, 711, 715

1004


PARTNumber

PAGENUMBER

159-0050 724

159-0950 632, 638, 643, 644

159-3662 83

159-8346 733

159-8347 737

159-8862 144

159-9526 659, 660, 670, 671, 672,673, 685, 686, 687, 878,

882

159-9527 700, 701

160-4103 92, 93, 94

160-4104 93

160-4106 93

160-4939 77

160-4940 77

160-5798 77

160-5799 77

160-6631 201, 202, 298, 699, 700,701, 884, 885, 887, 888

160-6910 83

160-7816 7, 8, 223, 288, 290, 440,441

160-7818 39, 40, 41, 233, 234, 335,338, 359, 360, 468, 470,476, 479, 502, 558, 583

160-7819 72, 73, 351, 352, 357, 495,496, 501, 516, 517, 518,

586

160-7820 69, 214, 215, 358

160-7821 71

160-9359 218

160-9756 12, 13, 14, 45, 46, 47, 226,238, 937

160-9757 12, 13, 14, 226, 937

160-9761 12, 13, 14, 226, 937

161-2166 545

161-4000 292

161-6304 647, 666

161-6305 667, 682

161-7247 12, 13, 14, 45, 46, 47, 226,238, 937

161-7249 12, 13, 14, 45, 46, 47, 226,238, 937

161-7350 45, 46, 47, 238

161-7550 45, 46, 47, 238

161-8581 111

161-8582 140

162-2166 79, 80, 84, 85, 86, 87, 89,120, 121, 122, 123, 124,125, 126, 127, 128, 129,133, 134, 157, 166, 173,218, 219, 393, 526, 543,544, 565, 816, 931, 932

162-2167 150, 151, 152, 153, 154,155, 165, 171, 172, 189

PARTNumber

PAGENUMBER

162-2168 185, 186, 187, 204, 629,634, 641, 642, 653

162-4304 614, 617, 618, 841, 842,847

162-4305 614, 617, 618, 841, 842,847

162-4306 614, 617, 618, 841, 842,847

162-4307 614, 617, 618, 841, 842,847

162-5610 736

162-5611 736

162-5612 736

162-7862 79, 80, 84, 85, 86, 87, 120,121, 122, 123, 124, 125,126, 127, 128, 129, 157,

166, 173, 218, 379

162-7863 150, 151, 152, 153, 154,155, 165, 171, 172, 189

162-7864 185, 186, 187, 204

162-8438 205

163-2169 91, 92

163-2170 91, 92

163-2171 91, 92, 93

163-2172 91, 92, 93

163-2173 92, 94

163-2174 92, 94

163-2175 92, 93, 94

163-2176 92, 93, 94

163-2177 91, 93, 95

163-2178 91, 93, 95

163-2179 93

163-2180 93

163-2415 159, 160

163-2922 43, 209, 236

163-2923 43, 209, 236

163-2924 43, 209, 236

163-2925 43, 209, 236

163-4143 594, 628, 634, 641, 650,651, 652

163-4144 628, 634, 641, 650, 651,652

163-4145 671

163-4146 671

163-6406 164

163-7093 901

163-7094 893, 901

163-7376 738

163-7393 671

163-7538 894

163-7539 894

163-8682 738

PARTNumber

PAGENUMBER

163-8686 140

163-8688 141

164-0403 111

164-4085 707

164-4611 111

165-0069 701

165-1746 6

165-1747 6

165-1748 6

165-1749 6

165-1750 37, 38, 478

165-1751 37, 38, 478

165-1752 37, 38, 478

165-1753 37, 38, 478

165-1754 71

165-1755 71

165-1756 71

165-1757 71

165-1758 115, 378, 538

165-1759 115, 378, 538

165-1760 115, 378, 538

165-1761 115, 378, 538

165-1767 6

165-1768 37, 38, 478

165-1769 71

165-1770 115, 378, 538

165-3663 137, 138, 140, 141

165-3664 137, 138, 140, 141

165-6942 122, 123, 126, 127, 131

165-6946 81, 82, 84, 85, 86, 87, 218

165-7211 136

165-7574 136

165-7576 136

165-7855 174

165-7860 174

165-7861 174

165-7862 174

166-0613 482, 483, 484

166-2121 483, 484

166-2123 483, 484

166-2287 98, 99, 100, 101, 102, 103,104, 105, 106, 107, 108,

109, 110, 111, 112

166-3315 125, 127

166-3316 125, 127

166-3317 124, 125, 126, 127

166-3318 125, 126, 127

166-3324 152, 153, 172

166-3449 137

1005


PARTNumber

PAGENUMBER

166-3451 137

166-3729 886

166-4927 713

166-4928 713

166-4929 713

166-4930 722

166-4931 722

166-4932 718, 722

166-4933 718, 722

166-9445 186

167-1128 733

167-1946 186

167-1947 172

167-1950 80

167-1951 80

167-1952 80

167-4339 838

168-6753 603

168-6755 599, 600, 602, 604

168-6756 599, 600, 601, 602, 603,604

168-6757 599, 600, 601, 603

168-6758 599, 600, 601, 602, 603,604

168-6759 599, 600, 601, 603

168-6760 599, 600, 601, 603

168-7576 739

168-7577 739

168-8407 732

168-8408 732

168-8409 732

169-0161 138

169-0162 138

169-0163 137

169-0164 137

169-5867 77, 78, 363

169-5868 77

169-8088 608

170-0792 80

170-0820 733

170-2501 942

170-3823 118, 541

170-3827 118, 541

171-2382 77

171-2383 77

171-2386 77

171-2387 77

171-5713 660, 670, 672, 673, 687,720, 723, 730, 878, 882

PARTNumber

PAGENUMBER

171-5714 729

171-5811 720, 723, 730

171-5825 729

171-5882 89, 133, 134, 219, 393,526, 543, 544, 545, 565,

816, 931, 932

171-5883 932

171-5897 738

171-5898 741

171-5899 741

171-6766 605

171-6767 605

171-7623 607

171-7624 607

172-0160 262, 435, 948, 952, 956

172-1764 904

172-1768 897

172-1769 897

172-1965 895

172-2100 896

172-3288 605

172-3290 605

172-6219 101

172-6220 101

172-6228 102

172-6229 102

173-0946 78, 216

173-7652 128

173-7653 128

173-7656 128

173-7657 128

173-7658 128

173-7659 128

173-7660 128

173-9775 741

174-0217 726, 728

174-0218 726, 728

174-0219 726, 728

174-0220 728

174-0221 726, 728

174-0222 726, 727, 728

174-0223 728

174-0224 728

174-0225 728

174-0226 728

174-0227 728

174-5948 270

174-5949 270

174-6977 314

PARTNumber

PAGENUMBER

174-6978 314

174-6979 270, 271

174-6980 270, 271

174-6981 270, 271

174-6982 270, 271

174-6983 268, 303

174-6985 268, 303

174-6986 271

174-6987 271

174-6992 268, 303

174-6993 268, 303

174-6994 268, 303

174-7001 259

174-7002 259

174-7006 296

174-7007 296

174-8500 731

174-8501 731

174-8783 83

174-8786 83

174-8788 83

174-8789 83

174-8790 83

175-1229 739

175-3828 141

175-3829 137

175-3830 137

175-3831 138

175-7045 735

175-7897 710, 711

175-7900 720, 724, 730

175-8020 584

175-8021 584

175-8022 584

175-8023 584

175-8024 585, 791

175-8025 585

175-8031 588

175-8032 588

175-8035 589, 805, 821

175-8036 589

175-8038 589

175-8184 745, 752, 760, 769

175-8185 747, 748, 754, 755, 762,763, 774

175-8216 819

175-8255 585

175-8256 586, 587

1006


PARTNumber

PAGENUMBER

175-8257 586, 587

175-8263 589

175-8365 584

175-8366 584

175-8367 584

175-8368 584

175-8369 588

175-8370 588

175-8371 588

175-8372 588

175-8552 583, 584, 743, 751, 758,766, 768, 782, 784

175-8553 584

175-8555 586

175-8673 584

175-8674 584

175-8728 588

175-8759 590

175-8789 769

175-8802 591

175-8811 769

175-8838 811

175-8839 811

175-8881 591

175-8882 591

175-8923 584, 593, 780, 782

175-8927 586, 587

175-8928 586, 587

175-8929 587, 798, 824

176-1281 314

176-2108 731

176-2146 731

176-4870 617, 841

176-4871 618

176-4872 614, 617, 618, 841, 842,847

176-4874 614

176-4879 602

176-5331 710, 711, 715, 733, 737

176-5332 720, 724, 730

176-5333 710, 711, 715, 733, 737

176-5334 720, 724, 730

176-7524 731

176-8618 871

176-9728 268, 303

178-1096 64

178-2543 741

178-2545 741

178-3927 738

PARTNumber

PAGENUMBER

178-3929 738

178-7195 137, 138, 139, 140, 141,142

178-7288 720

178-7289 720

178-7291 720, 724, 730

178-7292 720, 724, 730

178-7293 710

178-7294 710

178-7296 710, 715

178-7297 710

178-7540 720, 724, 730

179-0126 35, 36, 477

179-0693 656, 657, 677, 678, 679,680

179-0695 656, 657, 677, 678, 679,680

179-1292 659, 685, 699

179-1486 699, 700

179-1488 699, 700

179-1491 700

179-1492 700

179-1497 699, 700, 701, 884, 885,887, 888

179-1499 699, 700, 701, 884, 885,887, 888

179-2348 720

179-2393 720

179-2395 710

179-2396 710

179-3425 656, 657, 664, 666, 676,677, 678, 679, 680

179-3426 691, 692, 693, 694, 883

179-3427 656, 657, 664, 666, 676,677, 678, 679, 680

179-3428 691, 692, 693, 694, 883

179-4182 710, 715

179-9339 615

179-9340 615

180-0507 352, 496

180-0509 352

180-2677 620

180-2681 615

180-2683 615

180-2684 615

180-2686 615

180-2687 615

180-2689 615

180-4995 204

180-7319 279

180-7320 279

PARTNumber

PAGENUMBER

180-7321 279, 280, 281, 308, 309

183-2122 169

183-2131 182

183-2381 308

183-2382 308

183-2874 701, 884, 887

183-2875 701, 884, 887

183-2879 701, 885, 888

183-2880 701, 885, 888

183-2883 699, 700, 701, 884, 885,887, 888

183-5204 27

183-5207 27

183-5213 23

183-5214 23

183-5949 23

183-5950 23

183-8467 31

183-8468 27

184-2184 893

184-2607 204

184-4395 174

184-4396 180, 190

184-5859 615

184-6305 203, 204

184-6306 204

185-0656 899

185-0657 899

185-5065 724, 730

185-5093 724, 730

185-5102 724

185-5106 724

185-5253 77

185-5254 77

185-5256 77

185-5257 77

185-6151 342, 364, 482, 561

185-6152 481

185-7280 898

185-9159 609

185-9160 609

185-9185 609

185-9380 739

185-9381 739

185-9382 739

186-0780 168, 176

186-0781 168, 169

186-2836 829, 830

1007


PARTNumber

PAGENUMBER

186-5318 204

186-5319 204

186-5499 688

186-5500 688

186-5502 655

186-5503 655

186-5564 660, 661, 688, 689

187-1011 201

187-1484 201

187-2003 480

187-2004 480

187-2005 480

187-2006 480

187-3298 205

187-4845 342, 482

187-6540 648

187-9317 492

187-9318 492

188-1452 201, 202

188-3064 593, 624, 625, 631, 632,636, 637, 638, 639, 643,644, 646, 662, 663, 852,

855, 856

188-3065 656, 666, 676, 677, 678

188-3066 691, 692

188-5246 591

188-5251 590

188-5252 590

188-5257 592

188-5258 592

188-5261 591

188-5262 591

188-5263 591, 811

188-5264 591

188-5268 592

188-5270 588

188-5271 589

188-5272 589, 804

188-5310 401

188-5311 405

188-5312 405

188-5313 405

188-5314 405

188-5333 591

188-5334 591

188-5381 588

188-5383 588, 799, 812

188-5385 588

188-5387 588

PARTNumber

PAGENUMBER

188-5396 588

188-5397 588, 799, 812

188-5527 586

188-5531 401, 402

188-5532 401, 402

188-5588 586

188-5590 589, 801, 817

188-5591 588

188-5592 588

188-5593 588, 799, 812

188-5594 588

188-5595 590

188-5596 592, 820

188-5597 592

188-5600 592, 816

188-5601 591

188-5602 591

188-5603 591

188-5604 591

188-5605 591

188-5606 591

188-5607 411

188-5608 411

188-5610 407

188-5612 409

188-5613 405

188-5614 405

188-5615 405

188-5616 405

188-5617 405

188-5618 405

188-5633 586, 587, 780, 798, 824

188-5634 586, 587

188-5635 588

188-5636 590, 808

188-5637 590

188-5638 591

188-5639 401, 402

188-5640 401, 402

188-5641 406, 407

188-5658 401

188-5679 586

188-5689 401

188-5693 586

188-5694 586

188-5698 590

188-5699 590

188-5700 590

PARTNumber

PAGENUMBER

188-5701 590

188-5710 401

188-5711 401, 402

188-5712 401, 402

188-5721 590

188-5765 584

188-5773 583

188-5856 586, 587, 590, 780, 798,808, 824

188-5857 401, 402

188-6246 246, 426, 580

188-8764 426

189-0475 715

189-0476 715

189-0479 715

189-0794 715

189-0795 715

189-3032 92, 93, 94

189-3861 702, 703

189-3862 702, 703

189-3987 731

190-1534 12, 226

190-1536 12, 16, 226

190-1546 47, 238

190-1547 47, 52, 238

190-1551 12, 13, 937

190-2495 12, 13, 16, 17, 937, 938

190-3523 593, 624, 625, 631, 632,636, 637, 638, 643, 644,

662, 663, 855

190-3524 593, 624, 625, 631, 632,636, 637, 638, 643, 644,

662, 663, 855

190-7396 257, 433

191-0921 147

191-2028 549

191-2029 549

191-9917 147

192-0213 120, 122, 128, 379

192-0215 120, 124

192-0216 120

192-0219 120

192-0223 122, 126, 379

192-0224 122

192-0811 128

192-2549 549

192-2550 549

192-3184 492

192-3185 490

192-8303 701

1008


PARTNumber

PAGENUMBER

192-8358 702, 703

192-8458 675, 690

192-8459 675, 690

192-8460 675, 689, 690

193-1718 707

193-7070 897

193-7091 895

194-1130 669

194-1131 669

194-1133 624

194-1134 625, 631

194-1150 607

194-1155 729

194-1156 729

194-1157 729

194-1162 729

194-1172 601

194-1608 593, 637, 644

194-1609 593, 632, 638, 643

195-9343 636, 662

195-9344 663

196-1232 77

196-1233 77

196-1234 78

196-1235 78

196-1236 77, 78, 363

196-1237 78, 363

196-1712 23

196-4083 883

196-4404 255

196-4405 255

196-4672 481

196-7074 57

196-7078 57

196-7111 22, 23

196-7112 22

196-7113 22, 23

196-7114 22, 23

196-7839 77

196-9954 173

196-9955 172, 173

196-9956 173

196-9957 173

197-4161 673, 877, 878

197-7752 124, 126

197-7753 124, 126

197-7754 124

197-9672 481

PARTNumber

PAGENUMBER

197-9673 519

197-9674 481

197-9677 295, 442, 443

197-9678 295, 442, 443

197-9679 390, 391, 542, 560

198-1125 665, 681, 682, 879, 880

198-3378 314

198-4778 15, 48, 283, 284, 310, 311,317, 318

198-4780 382

198-5596 675

198-5597 675

198-6093 280

198-6094 280

198-6703 159

198-6704 159

198-6726 126

198-6859 159

198-6987 255

198-6988 255

198-6989 255

198-6990 255

198-6991 255

198-6992 255

198-7309 187

198-9059 549

199-2794 116, 117, 144, 162, 383,534, 536, 553

199-4501 728

199-5332 919, 926

199-5333 919, 926

199-5370 920, 921

199-5428 921, 925

199-5429 921, 925

199-5432 921, 925

199-5522 169

199-5523 169

199-5525 168

199-5531 169

199-5532 176

199-5534 176

199-5537 169

199-5538 169

199-9928 921, 923, 925, 928, 930

199-9929 921, 925, 928

200-0809 921, 925

200-0996 919, 926

200-4074 147

200-4197 667, 683

PARTNumber

PAGENUMBER

200-4273 665

200-4274 881

200-4275 881

200-5701 204

200-5702 204

200-5856 75

200-6325 199

200-6326 199

200-6432 673, 878

200-6493 77

200-6494 77

200-6495 77

200-6496 77

200-6497 77

200-6498 77

200-9127 593

200-9133 583, 584

200-9150 583, 584, 743, 751, 758,766, 768, 782, 784

200-9185 585

200-9235 585

200-9236 589

200-9237 592

200-9238 407

201-0826 656, 657, 664, 666, 676,677, 678, 679, 680

201-0828 691, 692, 693, 694, 883

201-1704 728

201-2775 702

201-2776 702

201-9116 656, 677

201-9117 666, 678

201-9118 691

201-9119 692

202-2404 217

202-4295 85, 86, 87, 218

202-4296 85, 86, 87

202-4303 84, 87

202-4304 84, 87

202-4902 729

203-0306 215

203-0859 692

203-0862 692

203-0944 176

203-2198 144

203-2199 169

203-2200 169

203-4604 264

203-4862 729

1009


PARTNumber

PAGENUMBER

203-6580 216

203-7987 216

203-8040 136

204-0365 318

204-1371 920, 921, 922, 923, 924,925, 927, 928

204-1375 921, 925

204-6365 25, 27, 29, 30, 31, 58, 59,62, 63, 64, 317, 318

204-9748 176

205-0709 84

205-1768 215

205-3594 673, 878

205-5796 144

205-6140 25, 27

205-6141 58, 59

205-6142 27

205-6143 27

205-6155 31

205-6157 31

205-6158 27

205-6159 27

205-6164 64

205-8267 426

206-1262 672, 687, 878, 882

206-1263 672, 687, 878, 882

206-1264 660, 670, 672, 687, 877,878, 882

206-1265 629, 634, 642, 653

206-1469 645, 875

206-1470 645, 875

206-1476 875

206-1477 875

206-1479 647, 875

206-1480 647, 875

206-2087 218

206-3065 876

206-3128 427

206-3130 426

206-3502 325

206-3504 325

206-3505 325

206-3506 325

206-3507 324, 454

206-3509 324

206-3510 294, 324

206-3511 294, 324

206-3512 324

206-3514 324

PARTNumber

PAGENUMBER

206-3515 324, 454

206-3517 324

206-3518 294, 324

206-3519 294, 324

206-3520 324

206-3522 324

206-3812 913

206-6004 696, 706, 707

206-6049 713

206-6050 716, 722

206-8837 110

206-8961 653

206-9211 629, 634, 642, 653

206-9212 660, 670, 672, 673, 687,878, 882

206-9257 660, 670, 672, 687, 878,882

206-9260 660, 670, 672, 687, 878,882

207-0469 881

207-0472 881

207-0476 882

207-0544 69, 71, 72, 73, 214, 215,351, 358, 495, 516, 665,

681, 682, 879, 880

207-0545 168, 169, 175, 176

207-3658 881

207-4873 647, 875

207-4874 647, 875

207-5283 683, 880, 881

207-5284 683, 881

207-5897 683, 880, 881

207-5898 683, 881

207-6061 736

207-8167 687

208-0763 490

208-0764 490

208-1508 70

209-3312 629, 634, 642, 653

209-3313 629, 634, 642, 653

209-4535 683, 880, 881

209-4536 683, 881

209-4539 683

209-4540 683

209-4541 183

209-4542 183

209-6383 696, 706, 886

209-6384 696, 706, 886

210-4645 908

210-4646 908

PARTNumber

PAGENUMBER

210-4647 908

210-4693 928

211-3295 696, 706, 707

211-9843 697

212-4205 481

212-4206 481

212-5118 893

212-5119 893, 901

212-5120 893, 901

212-5129 901

212-6559 911, 913

212-6628 913

212-6681 911, 913

212-6682 913

213-1932 664, 680

213-1933 657, 679

213-1971 694

213-1972 693

213-1975 883

214-3529 707

215-1574 317

215-2986 697

215-2991 697

215-3956 913

215-4006 911, 913

215-7492 197, 199

215-7495 198

215-7497 198

216-2956 259, 260, 263, 264, 265,266, 436, 771, 776, 942,

949, 953

216-2957 259, 260, 263, 264, 265,266, 436, 771, 776, 942,

949, 953

216-3442 932

216-6141 911, 913

216-6148 911, 913

216-6149 911, 913

216-6286 11, 293

217-5257 144

218-0048 549

218-0049 549

218-0050 549

218-0051 549

218-3274 4, 291

218-3387 77

218-3388 77

218-4993 18, 19, 316

218-5073 737

218-5404 703

1010


PARTNumber

PAGENUMBER

218-5405 703

218-5439 703

219-4302 911, 913

219-8212 703

219-8227 703

219-8238 675

219-8468 654

219-8469 654

220-8161 926

221-0010 648

221-0011 257

221-0012 257

222-1796 43

222-1797 43

222-2265 946

222-3058 950, 954

222-3595 675

222-5682 930

222-5683 930

222-5684 930

222-5686 928

222-5687 928

222-6998 538

222-7001 181, 182, 192, 193, 732

222-7007 197, 199, 736

222-7244 380

223-1617 163

223-1618 163

223-8372 922, 923, 929, 930

223-8396 911

223-8397 911

223-8398 913

223-8399 913

223-9110 53, 54, 487

224-3959 7, 223, 288, 290, 440

224-5918 203

224-7269 647, 875

224-7270 647

224-7732 647, 875

224-7733 647

224-9407 913

224-9409 911, 913

225-7650 262

226-0268 183

226-0269 183

226-4049 890

226-4050 890

226-5101 675, 690

PARTNumber

PAGENUMBER

226-5103 703

226-5369 654, 674

227-3029 695, 704, 705, 886

227-5971 17, 299, 316

227-9954 7, 223, 288, 290, 440

227-9960 290, 440

227-9976 7, 290

228-2735 72, 351, 353, 355, 495,497, 499, 516, 796

228-2736 72, 351, 353, 355, 495,497, 499, 516, 796

228-2737 72, 351, 353, 495, 497, 516

228-2738 72, 351, 353, 495, 497, 516

228-2739 72, 351, 353, 495, 497, 516

228-2740 72, 351, 353, 495, 497, 516

228-2743 7

228-2744 7, 223, 224

228-3711 14

228-4230 483

228-4231 521

228-6403 877

228-6404 877

228-6405 884, 887

228-7597 183

228-7598 183

228-8376 734

228-8403 920, 921, 924, 925, 927,928

228-9812 170

229-0998 847

229-3525 197

229-3526 197

229-3527 197

229-3528 197

229-5446 52, 485

229-6909 39, 233, 235, 476

229-6910 39, 233, 235, 476

229-6915 39, 233, 476

229-9556 98, 99

229-9557 98, 99

229-9558 98, 100

229-9559 98, 100

229-9568 99, 100

229-9569 99, 100

230-3732 922, 923, 929, 930

230-3733 922, 923, 929, 930

230-3772 923

230-3996 501

230-4512 72, 351, 495, 516

PARTNumber

PAGENUMBER

230-6167 516

230-6173 516

230-7154 734

230-7156 734

230-7159 734

230-7162 734

230-7177 480

230-7269 480

230-7272 39, 476

230-7273 476

231-1910 892

231-1911 890

231-3079 436, 942, 949, 953

231-3080 436

231-3087 89, 526

231-3088 89, 526

231-3089 89, 526

231-3090 134, 545

231-3091 134, 545

231-3092 134, 545

231-3093 219

231-3712 519

231-3713 518, 519

231-3714 515

231-3715 515

231-4010 531

231-4011 529

231-4605 199

231-4606 199

231-4607 199

231-4608 199

231-9484 200

231-9486 200

232-3326 170

232-4466 891

233-0368 47, 48, 49

233-0372 47, 48, 49

233-0375 50, 51

233-0385 383, 385, 536, 553, 808

233-0386 383, 385, 536, 553, 808

233-2048 892

233-4846 81, 82

233-4848 83

233-4851 83

233-5001 22, 23

233-7230 480

234-0742 908

234-0743 923, 930

1011


PARTNumber

PAGENUMBER

234-4319 49, 81, 82, 83

234-4320 82

234-5973 170

234-5974 170

234-5975 170

234-6029 183

234-6030 183

234-6031 183

234-6033 183

234-6084 170

234-6943 181, 182

234-6944 181, 182

234-7703 177

234-8877 187

234-8881 187

234-8952 898

234-8958 898

234-8959 898

234-8962 898, 904

234-8967 896

234-8968 896

234-8984 895, 896

234-9368 890

234-9369 890

234-9672 66, 67

234-9699 66, 67, 514, 515

234-9700 75

234-9704 75

234-9705 75

235-1088 917, 918

235-1397 75

235-2501 33, 34, 475

235-2503 42

235-2504 42

235-2511 33

235-2514 4, 291

235-2529 289, 315

235-2533 315

235-2534 294, 315

235-2535 289

235-2536 289

235-2554 294, 315

235-2555 294

235-2558 256

235-2559 256

235-2620 4

235-4157 88, 524

235-5260 647

PARTNumber

PAGENUMBER

235-5974 88, 522

235-7774 688, 689

235-7775 688, 689

235-8531 684

235-8536 698

236-1870 11

236-5090 923

236-5092 923

236-8178 534

236-8179 536

236-8281 934

236-8282 936

236-8805 183

236-8893 676

236-9861 351, 495, 586

236-9864 72, 351, 586

236-9865 72

236-9866 72, 351, 586

236-9874 72

237-3790 116, 117, 383, 534, 536,553

237-7305 353, 355, 497, 499, 796

237-7306 355, 499, 796

237-7530 68

237-7531 75

237-8201 300, 301

238-0450 82

238-0452 49, 81, 82, 83

238-0453 49, 81, 82, 83

238-0472 289, 315

238-0473 289, 315

238-3231 900

238-6928 39

238-6929 233, 235

238-6930 39

238-6931 39

238-7664 919

238-7709 929, 930

238-7728 920, 924, 927, 928

238-7729 920, 924, 927, 928

238-7860 544

238-7861 544

238-8371 256

238-8591 696

238-8592 696

238-9851 181

238-9852 182

238-9950 355, 499

PARTNumber

PAGENUMBER

238-9951 353, 497

238-9954 353

238-9956 796, 798

239-0673 192

239-0674 193

239-0675 192

239-0676 192

239-0677 192, 193

239-0678 192, 193

239-0679 193

239-0680 193

239-2230 383

239-2309 183

239-2310 183

239-3690 684

239-3691 698

239-4362 626, 627, 633, 640, 648

239-5272 181, 182, 192, 193

239-5509 181, 192

239-6877 383

239-6881 553

239-6882 383

239-7943 113, 115, 143, 144, 146,162, 163, 377, 378

239-8090 47

239-8091 47

239-8211 316

240-2503 355, 499, 796

240-2504 355, 499, 796

240-2988 629, 642, 653, 673

240-3056 855

240-6304 902

240-6305 902

240-6306 902

240-6673 148

240-6674 148

240-8933 18, 19, 316

240-9557 53, 54, 487

241-1855 157, 159, 166, 173, 189,920

241-5972 903

241-5973 903

241-5976 903

241-7870 315

241-7871 42

242-1931 148

242-4066 723, 730

242-4067 720, 723, 730

242-4070 720, 723, 730

1012


PARTNumber

PAGENUMBER

242-6373 198

242-6374 198

242-8904 75

243-0495 475

243-0499 475

243-0501 480

243-2693 256

243-3277 264

243-4365 170

243-4368 170

243-4372 183

243-4373 183

243-5319 298

243-5321 295, 296, 316

243-5322 316

243-5325 219

243-5728 119

243-5729 119, 389

243-5730 119

243-5731 119, 389

243-5732 119

243-5733 119, 389

243-5734 119

243-5735 119

243-5736 119

243-5737 119

243-6329 144

244-0878 150

244-0879 150, 155, 165

244-1323 152

244-1324 152

244-3099 935

244-4534 479, 480

244-6571 39, 233, 476

244-6572 39, 233, 476

244-6573 39, 233, 476

244-6574 39, 233, 476

244-8697 717, 718, 726, 727

245-3805 717, 718, 726, 727

245-3806 717, 718, 726, 727

245-3808 717, 718, 726, 727

245-9942 171

245-9943 173

245-9944 173

245-9945 173

245-9946 173

245-9947 185

245-9950 201

PARTNumber

PAGENUMBER

245-9951 204

245-9952 204

246-0504 717

246-0505 726, 728

246-0506 726, 728

246-0775 156, 157, 166

246-0779 157, 166

246-0780 157, 166

246-1906 624, 625, 631, 632, 636,637, 638, 643, 644, 662,

663

246-1907 656, 657, 676, 677, 678,679, 680

246-1908 691, 692, 693, 694

246-4341 49

246-5140 75

246-5203 75

246-5205 75

246-5207 75

246-5211 75

246-5213 75

246-5216 67

246-5220 68

246-5228 799, 812

246-5425 626, 627, 633, 640, 648

246-5474 256

246-5475 256

246-5714 49

246-5726 315

246-5727 315

246-5747 42

246-5748 42

246-5749 42

246-5750 42

246-5751 42

246-5753 34

246-5808 385

246-5810 808

246-7483 148

246-7486 148

246-7493 148

247-0264 118, 378

247-0564 659, 670, 685, 686

247-0565 659, 670, 685, 686

247-0566 686

247-1475 385, 539, 808

247-1476 539, 808

247-7647 935

248-1537 417, 717, 718, 726, 727

PARTNumber

PAGENUMBER

248-1539 403, 572

248-1967 712

248-2041 812

248-2987 160, 161, 167

248-3955 25

248-3957 25

248-3971 48

248-3972 48

248-5304 15

248-5317 134

248-5319 134

248-5325 15

248-5326 15

248-5531 197, 199

248-7143 594, 626, 633, 640, 648

248-7151 698, 708

248-7255 709

248-7256 719

248-7257 729

248-7259 622

248-7260 622

248-7261 622

248-7262 622

249-2939 128

249-2940 128

249-5288 198

249-5500 548

249-5501 548

249-5507 549

249-5509 549

249-7174 168, 169, 175, 176

249-7627 260

249-7628 260

250-0367 298

250-0368 298

250-2336 403, 572

250-2337 417

250-3988 35, 36, 37, 38, 39, 40, 208,232, 233, 476, 477, 478,

645, 875

250-3990 335, 338, 359, 360, 468,470, 479, 502, 558, 583

250-3992 5, 6, 222, 292, 442

250-3996 352, 357, 496, 517, 518,586

250-3998 384, 387, 535, 537, 554,556, 590, 695, 704, 705,

886

250-4000 7, 8, 288, 290, 440, 441

250-4002 246, 249, 251, 426, 427,429, 580, 946, 950, 954

1013


PARTNumber

PAGENUMBER

250-4004 293, 319, 450, 460, 461

250-4215 175

250-4216 175

250-4217 176

250-4218 176

250-4219 175, 176

250-4220 175, 176

250-4243 169

250-4244 169

250-4245 168

250-4246 168

250-4247 168, 169

250-4248 168, 169

250-9471 280

250-9472 280

250-9505 307

250-9513 260

250-9514 260

250-9515 298

250-9516 298

251-1659 116, 117, 383, 534, 536,553

251-1660 116, 117, 383, 534, 536,553

251-2473 712

251-2474 712

251-3273 180, 190

251-3280 196, 205

251-7757 695, 704, 705, 886

251-8364 695, 704, 705, 886

251-8368 695, 704, 705, 886

251-8531 317

251-8532 317

251-8570 62, 63, 64

251-8578 29, 30

251-8580 29, 30, 31, 317, 318

251-8595 14

251-8596 14

251-8597 14

252-0546 44

252-1578 314

252-4429 705

252-5169 314

252-5170 314

252-5387 281

252-5388 281

252-6327 181, 182, 192, 193

252-6329 181, 182, 192, 193

PARTNumber

PAGENUMBER

252-7855 35, 36, 39, 40, 208, 232,233, 234, 476, 477

252-7856 5, 222

252-7857 352, 357, 496, 501, 517,518

252-7858 384, 387, 535, 537, 554,556

252-7859 335, 338, 359, 360, 468,470, 479, 502, 558

252-7860 7, 8, 223, 288, 290, 440,441

252-7861 246, 249, 426, 427, 429

252-7862 293, 319, 450, 460, 461

252-9705 77

252-9706 77

252-9707 77

252-9708 77

253-0336 886

253-0543 530

253-0544 530

253-0547 528

253-0548 528

253-2740 695, 704, 886

253-2741 717

253-2742 726

253-3667 532

253-3668 532

254-0224 67, 514, 515

254-0225 33, 34

254-0227 4

254-0228 247

254-0230 75

254-0233 75

254-0234 75

254-0614 258

254-0615 296

254-0634 258

254-0635 295, 296

254-0644 258

254-0645 295, 296

254-0669 302

254-0681 302

254-0684 258

254-3801 15

254-3802 15

254-3927 47, 48, 49

254-3928 47, 48, 49

254-3929 47, 48, 49

254-4095 882

254-4432 15

PARTNumber

PAGENUMBER

254-4433 15, 51

254-4467 75

254-4468 75

254-4469 75

254-4470 75

254-4471 75

254-4472 75

254-4473 75

254-4474 75

254-4475 75

254-5240 530

254-5241 530

254-5242 530

254-5243 530

254-5288 491

254-5289 491

254-5290 492

254-5291 492

254-7199 36

254-9047 42

254-9048 42

254-9049 42

254-9050 42

254-9051 42

254-9052 42

254-9053 42

255-1075 489

255-1076 489

255-1530 10

255-1532 10

255-1533 10

255-1534 10

255-1536 10

255-1537 10

255-4182 294, 315

255-4183 315

255-4184 315

255-4185 315

255-4791 116, 383, 385, 534, 536,553

255-4792 116, 383, 385, 534, 536,553

255-4793 116, 383, 385, 534, 536,553

255-4794 116, 383, 385, 534, 536,553

255-5983 521

255-7174 91, 92, 94, 95

255-8060 520

255-8095 315

1014


PARTNumber

PAGENUMBER

255-8882 133, 393, 543, 565, 816

255-9219 390, 391, 560

256-4944 10

256-4971 518

256-6081 886

256-6084 736

256-9360 69, 72, 73, 214, 215, 351,358, 495, 516

256-9612 514

257-1990 580

257-1991 580

257-1992 580

257-1993 581

257-1994 580

257-2336 10

257-3604 705

257-6926 148

257-6929 148

257-7765 580, 581

257-7766 580, 581

257-7767 580, 581

257-7768 580, 581

257-7769 580

257-7770 580

257-7771 580

257-7772 580

257-7773 580, 581

257-7775 581

257-7776 581

257-7777 581

257-8012 583, 584

257-8013 583, 584

257-8016 583, 584

257-8017 583, 584

257-8020 583

257-8021 583

257-8022 584

257-9827 187

257-9829 187

258-3016 918

258-3017 918

258-3020 917

258-3021 917

258-3025 916, 917

258-3026 916, 917

258-3028 917

258-3035 916, 917

258-3041 918

PARTNumber

PAGENUMBER

258-3047 918

258-3050 915

258-3064 916

258-3065 917

258-3074 917

258-3075 916, 917

258-3084 915

258-3085 915

258-3086 915

258-3087 908, 915

258-3088 915

258-3089 915

258-3092 916, 917

258-3103 917

258-3112 916, 917

258-3116 917, 918

258-3117 917

258-3118 917

258-3122 915

258-4614 201, 202

258-4806 187

258-6544 521

258-8328 886

258-9787 256

258-9788 295

258-9792 257

258-9793 257

258-9797 364, 505, 519

258-9802 481

259-1072 521

259-6864 492

259-7062 583

259-7063 586

259-7064 590

259-7065 401

259-8137 379, 380

260-1507 583

260-1508 583

260-1509 583

260-1511 585

260-1512 584

260-2276 673

260-2277 674, 675

260-2278 674, 675

260-2441 690

260-2442 690

260-2665 899

260-2666 899

PARTNumber

PAGENUMBER

260-5851 588

260-6341 902

260-6400 893, 894

260-6740 247, 248

260-6762 294

260-6765 10

260-6766 10

260-6767 10

260-6768 10, 294

260-6769 10, 294

260-6770 294

260-6771 10

260-6772 10, 294

260-6773 10, 294

260-8739 223

261-1011 874

261-1012 874

261-1013 874

261-1014 874

261-1015 874

261-1016 874

261-1017 874

261-1018 874

261-1021 874

261-1022 874

261-1024 874

261-2040 25

261-2041 25

261-2042 25

261-2043 25

261-2044 58, 59

261-2046 59

261-2047 59

261-2070 318

261-2082 317

261-2083 317

261-2353 116, 117, 383, 534, 536,553

261-4338 197, 199

261-4408 197, 199

261-4472 296

261-4473 258

261-6103 923

261-6104 921, 925

261-6105 921, 925

261-6106 930

261-6107 930

261-6111 928

1015


PARTNumber

PAGENUMBER

261-6112 920, 924, 927, 928

261-6150 926

261-6151 919

261-6296 920, 924, 927, 928

261-6297 920, 924, 927, 928

261-6300 922, 923

261-6301 922

261-6302 929

261-6303 929

261-7105 494

261-8008 581

261-9672 152, 153, 172

261-9673 152, 153, 172

261-9674 186

261-9675 186

262-2093 295

262-4781 626, 648

262-5877 302

262-5878 302

262-7248 54

262-7249 54

263-2009 307

263-2010 307

263-2011 269

263-3227 273

263-3230 273

263-3232 273

263-3234 273

263-8325 268, 269, 270

263-8332 269

263-8337 268, 269, 270

263-8342 277

263-8343 277

263-8355 268

263-8356 268

263-8363 268, 269, 270

263-8364 268, 269, 270

263-8365 302

263-8366 302

263-9237 900

263-9240 900

263-9250 892

263-9252 893

263-9253 893

263-9262 892

263-9264 905

263-9265 905

263-9267 899

PARTNumber

PAGENUMBER

263-9268 899

263-9759 389, 541

263-9760 389, 541, 559

263-9761 389, 541, 559

263-9762 389

263-9763 119

263-9764 119, 389

264-1108 519

264-1110 480

264-1671 689

264-1672 689

264-5371 895

264-7098 494

264-7099 494

264-9821 698, 708

265-0929 307

265-0932 307

265-0934 307

265-0935 267, 307

265-0940 314

265-0945 267

265-0946 267

265-0949 267

265-0953 267

265-5109 665, 682, 879

265-6385 910

265-7674 904

265-7675 903

265-8320 75

265-8321 75

266-0083 75

266-0084 75

266-0088 75

266-0089 75

266-3152 161, 167, 174

266-7271 665, 681, 682, 879

266-7272 665, 681, 682, 879

266-8793 898

266-8794 896

267-3878 807, 808

267-4813 902

267-4817 902

267-4819 902

267-4829 895

267-4831 895

267-6099 42

267-6131 273

267-6132 273

PARTNumber

PAGENUMBER

267-6136 273

267-6137 273

267-7504 148

267-8910 42

268-5945 110, 111

269-1133 10

269-4004 665, 681, 879

269-4027 665, 681, 879

269-5215 681

269-7103 665, 879

269-7858 682, 879, 880

270-2672 75

271-6033 318

271-6079 22, 57

271-6080 317

271-6081 317

271-6085 318

271-6086 318

271-6093 48

271-6094 49

271-6095 49

271-6117 15

271-6118 15

272-3163 145

272-3171 145

272-3179 148

272-3180 148

272-3181 148

272-3182 148

272-3183 148

272-6009 143

272-6010 144

272-6013 113, 143, 144, 146, 162,163

273-1685 75

273-1686 75

273-6910 689

273-8806 145

274-2008 75

274-7839 42

275-3564 581

275-3565 581

275-3566 581

275-3567 581

275-3570 581

275-3571 581

275-3576 581

275-3578 582

1016


PARTNumber

PAGENUMBER

275-3579 582, 776

275-3580 582

275-3581 582

275-4086 582

276-0533 148

276-0541 148

276-0545 148

276-0550 145

276-0552 148

276-0979 613

276-1680 309

276-1681 309

276-1690 303, 304

276-1691 303, 304

276-1695 311

276-1699 303, 304

276-1700 303, 304

276-1701 303, 304

276-1702 303, 304

276-1711 267

276-1716 280, 281

276-1717 280, 281

276-1718 280, 281, 309

276-1753 283

276-1754 283

276-1755 311

276-1757 284

276-1766 284

276-2414 183

276-2416 183

276-2417 183

276-2418 183

277-2238 294, 315

277-2239 315

277-2240 315

277-4492 392, 542, 562, 563, 564

277-8576 611, 903

277-8577 611, 903

277-8667 609

277-8669 609, 610

278-1011 283

278-1215 908

278-1219 919

278-1240 919, 926

278-1261 912

278-1264 919, 926

278-1265 919, 926

278-1266 919, 926

PARTNumber

PAGENUMBER

278-1301 909

278-1310 920, 922, 924, 927, 929

278-1311 920, 922, 924, 927, 929

278-1312 922, 929

278-2352 184

278-2355 256

278-2356 256

278-2358 294

278-2359 294

278-2365 200

278-2366 200

278-2374 183

278-2375 149

278-2376 170

278-7282 709

278-7284 719

278-7286 729

278-9538 157, 166

278-9539 157, 166

278-9540 157, 166

278-9541 157, 166

279-4242 82

279-4243 82

279-9120 483

279-9322 482

279-9325 482

280-1417 483

280-5025 909, 910, 912

280-5026 909, 910, 912

280-5030 909

280-5031 909

280-5035 909, 910, 912

280-5038 909, 910, 912

280-5074 909, 910, 912

280-5075 909, 910, 912

280-5091 908

280-5112 909, 910, 912

280-8722 519

281-6370 405

281-6371 405

281-6372 405

281-6373 405

281-6374 405

281-6380 411

281-6386 411

281-8338 264, 265, 266, 582

281-8339 264, 265, 266, 582, 776

PARTNumber

PAGENUMBER

282-3655 390, 391, 542, 560, 561,591

282-3668 283

282-3669 283

282-3679 310

282-4017 81, 82, 83

283-5249 81, 83

283-5250 81, 83

283-5251 82

283-5252 82

283-5253 81, 83

283-5254 81, 83

283-5746 48, 49, 50, 51

283-5748 48, 49, 50, 51

283-5750 48, 49, 50, 51

283-5752 48, 49, 50, 51

283-5753 48, 49

283-6423 270

283-6424 270

283-6425 270

283-6426 270

283-8702 75

283-8705 75

283-8707 75

284-5456 157, 166

284-7361 655

284-7362 655

284-7832 268

284-7833 268

285-3476 295

285-4296 519

285-6125 609

285-7499 302

285-7502 302

285-7505 302

285-7511 302

286-0732 145

286-1832 277

286-1833 277

286-1840 277

286-1845 276

286-1846 276

286-1850 277

286-1858 308

286-1859 308

286-4226 520

286-4227 520

286-4261 269

1017


PARTNumber

PAGENUMBER

286-4262 269

286-7211 302

286-7212 302

286-9821 593

286-9823 594

286-9824 594

286-9825 593

286-9826 593

286-9827 593

286-9828 593

286-9830 594

287-3118 593

287-3119 593

287-3231 593

287-3232 593

287-4021 269

287-4022 269

287-4023 269

287-4024 269

287-6104 42

287-8269 880

287-8270 880

288-0934 88, 370, 509, 525, 802,803, 820

288-0935 88, 370, 509, 525

288-0936 88, 525

288-0945 88, 370, 509, 525, 802,803, 820

288-0946 88, 370, 509, 525

288-0947 88, 370, 509, 525, 802,803, 820

288-0948 88, 370, 509, 525

288-3690 802

288-3691 800, 813

288-3693 824

288-3694 808

288-3705 798, 824

288-5754 807

288-5755 807

288-6668 811

288-6669 811

288-6670 811

288-6671 811

288-6672 811

288-6673 811

288-6676 811

288-6677 811

288-6678 799, 812

288-6679 799, 812

PARTNumber

PAGENUMBER

288-6681 811

288-8173 234

289-0270 288

289-0631 798, 824

289-0632 798, 824

289-0633 808

289-0634 808

289-0635 807

289-0636 807

289-0638 807, 808

289-0639 587, 798, 824

289-0640 807, 808

289-0641 798, 824

289-0642 807, 808

289-0643 798, 824

289-0644 807, 808

289-0645 798, 824

289-0646 593, 780, 782

289-0647 798, 824

289-0648 807, 808

289-2206 799, 813

289-2207 800, 813

289-2211 812

289-3057 247, 248

289-3058 247, 248

289-3059 247

289-3060 247

289-3061 247, 248

289-3083 116, 534, 539

289-3084 116, 534, 539

289-3085 315

289-3578 75

289-3579 75

289-4949 782

289-4950 782

289-4951 780

289-4952 780

289-4954 780, 782

289-4955 593, 780, 782

289-4956 593, 780, 782

289-4957 780, 782

289-5117 799, 812

289-5210 42

289-5214 75

289-9337 743, 751, 758, 766, 768,784

289-9338 743, 751, 758, 766, 768,784

289-9674 785

PARTNumber

PAGENUMBER

290-0737 45

290-0738 45

290-0749 14

290-0819 827

290-0820 826, 827

290-0821 826, 827

290-0822 827

290-0823 826, 827

290-0825 825, 827

290-0826 826, 827

290-0835 827

290-0836 827

290-0837 827

290-0838 827

290-0839 827

290-0841 825, 827

290-0843 825, 827

290-0844 826, 827

290-0845 825, 827

290-0846 827

290-0847 827

290-0861 828

290-2269 875

290-2270 875

290-2700 312

290-3391 286

290-3449 751, 758

290-3450 743

290-3453 743, 751, 758, 766, 784

290-3454 743, 751, 758, 766, 784

290-3455 743, 751, 758, 766, 768,784

290-3456 743, 751, 758, 766, 784

290-3457 743, 751, 758, 766, 784

290-3458 743, 751, 758, 766, 768,784

290-3459 768

290-3460 768

290-3461 768

290-3462 768

290-6589 587

290-7311 181

290-7312 181

290-7313 182

290-7314 182

290-9938 799, 812

290-9940 799, 812

290-9941 799, 812

290-9942 799, 812

1018


PARTNumber

PAGENUMBER

291-1612 116, 534

291-1613 116

291-1614 539

291-1615 116

291-5594 75

291-9151 75

292-5634 799, 812

292-5653 75

292-5655 76

292-6379 518

292-6380 518

292-6381 518

292-8081 202

292-8084 202

292-8085 202

292-8086 202

292-8088 202

292-8090 202

293-4691 81

293-4692 82

293-4693 83

293-8216 709

293-8217 719

293-8218 729

293-9077 42

293-9146 39, 233, 476

293-9147 72, 351, 495, 516

294-0567 75

294-0569 75

294-0570 75

294-0571 75

294-0574 75

294-0575 75

294-3060 718

294-3061 718

294-3062 718

294-3063 727

294-3064 727

294-4813 42

294-8262 609

295-3210 912

295-3211 910, 912

295-3230 910

295-3292 909, 910, 912

295-3295 909, 910, 912

295-7802 379

295-9963 148

295-9964 148

PARTNumber

PAGENUMBER

295-9965 148

295-9967 148

295-9968 148

296-0068 15

296-1372 148

296-1373 148

296-1396 148

296-4359 727

296-4360 727

296-4361 718

296-4362 718

296-7488 905

296-7489 905

297-0129 727

297-0130 727

297-8453 75

297-8454 75

297-8455 75

297-8456 75

297-8457 75

297-8458 75

297-8459 75

297-8460 75

299-1689 704

299-1690 717

299-4179 381

300-0417 10

300-0418 10

300-3658 479

300-3660 479

300-4538 659, 685, 699

300-4544 659, 685, 699

300-4606 709

300-4608 709

300-4610 709, 710

300-4611 720

300-6457 667

300-6458 667

300-8743 148

300-9112 148

301-0650 263

301-0652 263

301-0654 263

301-2279 728

301-2281 728

301-2283 728

301-2285 728

301-2287 704

PARTNumber

PAGENUMBER

301-2297 705

301-2299 705

301-2301 727

301-2303 705

301-2307 695, 696, 704

301-4302 247, 248

302-5722 263

303-9455 246, 580

304-1875 931, 932

304-1876 931, 932

304-1878 931

304-1880 931

304-1882 932

304-1883 931, 932

304-1884 932

304-1885 932

304-1886 931, 932

304-1887 932

304-1890 932

304-1891 932

304-1894 932

304-1895 932

304-1909 931

304-1916 931

304-5680 145

304-5688 145

305-1439 286

305-1442 286

305-1443 286

305-1446 286

305-1448 286

305-1449 286

305-1450 286

305-1451 286

305-1453 286

305-1454 286

305-1455 286

305-1456 312

305-1458 312

305-1460 312

305-1462 312

305-1463 312

305-1464 312

305-1465 312

305-1466 312

305-1469 312

305-1471 312

305-1473 312

1019


PARTNumber

PAGENUMBER

305-1474 312

305-1475 312

305-9253 925

305-9254 925

305-9256 930

305-9261 914

305-9262 914

305-9285 908

305-9361 705

305-9362 705

305-9363 695, 704

305-9364 695, 704

306-2148 656, 657, 664, 666, 676,677, 678, 679, 680, 874

306-9425 197, 199

306-9431 178, 185, 186, 187

306-9433 201, 202

306-9435 203, 204

306-9437 154

306-9439 154

306-9441 150, 151, 152, 153, 155,165, 171, 172

306-9443 171, 172

306-9445 171, 172

306-9447 185, 186, 187

306-9449 185, 186, 187

306-9451 201, 202

306-9453 201, 202

306-9455 204

306-9457 204

307-0761 153

307-2004 183

307-2005 183

307-2007 183

307-2008 183

307-2009 183

307-2010 183

308-3056 593

308-3057 593

308-6229 593

308-6230 593

308-6854 519

309-3295 916

309-3296 916

309-3297 916

309-3298 917, 918

309-3299 917

309-7676 189

309-7677 189

PARTNumber

PAGENUMBER

309-7678 189

309-7679 188, 189

309-7680 189

310-4269 112

310-5823 200

310-5824 200

310-5825 200

310-5826 200

310-5827 200

310-5828 200

310-5829 200

310-5830 200

310-5831 200

310-5832 200

310-5833 200

310-5834 200

310-5835 200

310-5836 200

310-5837 200

310-5838 200

310-5839 200

310-5840 200

310-6654 587

310-7375 306

310-7376 306

310-7502 266

310-7503 266

310-8310 491

310-8311 491

310-8312 491

310-8534 381

311-2557 380, 381, 382

311-6643 315

311-6644 315

311-8150 691, 692, 693, 694, 886

312-2269 4, 291

312-2270 4

312-2271 4, 291

312-2273 4

312-2274 291

313-4542 42

313-4543 42

313-4548 10

314-5462 119, 149

314-5466 153

314-5467 153

314-7841 587

315-6693 405

PARTNumber

PAGENUMBER

316-1443 587

316-3369 199

316-3370 197

316-8674 153

317-1018 148

317-1019 148

317-1020 148

317-1021 148

317-1030 147, 164

317-1031 147

317-1033 148

317-9078 370, 509, 803, 820

317-9079 88, 370, 509, 524, 525, 802

317-9080 88, 524, 525

318-1064 67, 514, 515

318-2375 33, 34

318-2558 691, 692, 693, 694

318-2559 691, 692, 693, 694

318-5033 145

320-2677 709

321-1462 656, 657, 664, 666, 676,677, 678, 679, 680

321-1463 691, 692, 693, 694, 883

321-2018 145

321-2019 145

322-6236 745, 753, 760

322-6302 769

322-6304 769

322-6376 785

322-7981 75

323-0955 599

323-0956 599

323-0957 600

323-0958 600

323-0959 599, 600, 601, 602, 603,604

323-1168 46

323-1169 46

323-1170 79

323-1171 79, 80

323-5925 380

323-5928 380

323-5931 380

323-8755 246

323-8756 246, 249, 580

323-8757 246, 249, 580

323-8758 246, 249, 580

323-8759 246, 249, 580

324-3327 379

1020


PARTNumber

PAGENUMBER

325-8624 908

327-5831 294, 315

327-5853 380, 381

327-6077 380

327-7724 916

327-7727 916

327-9305 377

327-9329 379

327-9330 379

327-9331 379

328-3369 381

328-3370 381

329-3980 380

329-3981 380

329-3982 379

329-5408 151, 153

329-5409 151

329-5411 151, 153

329-5412 151

329-8622 198

329-9268 147

329-9269 147, 164

329-9270 147, 164

329-9271 147, 164

329-9272 147, 164

329-9273 147, 164

329-9818 147, 164

330-0580 147

330-0581 147

330-0582 147

330-0583 147

330-7667 118

330-7668 118

330-7669 118

330-7670 118

330-7671 118

332-6423 189

332-6424 189

335-5478 593

337-0986 206

337-0987 206

337-0988 206

337-0989 206

338-7441 382

338-7442 382

339-0253 75

339-0254 75

339-0255 75

PARTNumber

PAGENUMBER

339-0256 75

339-0257 75

339-0258 75

339-0259 75

339-0261 76

339-0262 75

339-0263 75

339-0266 75

339-0267 75

339-0268 75

339-0269 75

339-2908 51

340-2777 382

340-2778 382

340-8206 845

340-8957 904

343-4596 931

351-0886 80

351-0955 66, 67, 514, 515

351-0956 66, 67, 515

351-0957 66, 67

351-0958 66, 67

351-0959 33, 34, 475

351-0960 33, 34, 475

351-0961 33, 34

351-0962 33

351-8927 379

351-8928 379

352-9703 181, 182, 192, 193

352-9711 197, 199

355-1292 191

355-1293 191

355-1294 190

355-1295 190

357-6310 154

357-6311 154

360-2560 379

364-0693 378

0L-1169 748, 755, 763, 774, 791

0L-1351 18, 262, 299, 330, 435,445, 457, 463, 747, 754,762, 772, 789, 944, 948,

952, 956

0L-1714 376

0S-0509 773

0S-1566 529, 571

0S-1585 159, 195, 264, 265, 266,408, 409, 412, 413, 436,574, 582, 776, 831, 942

PARTNumber

PAGENUMBER

0S-1587 366, 367, 422, 423, 507,577, 830, 835

0S-1588 327, 328, 329, 343, 344,345, 365, 456, 471, 506,

787, 815

0S-1589 529, 835

0S-1592 398, 578, 822, 835, 836

0S-1594 21, 53, 56, 84, 85, 86, 87,90, 133, 156, 210, 218,

228, 237, 241, 301, 333,346, 368, 369, 393, 394,410, 411, 447, 465, 472,486, 487, 489, 508, 523,524, 527, 543, 565, 566,567, 575, 576, 788, 801,

816, 817, 832, 833

0S-1595 135, 158, 173, 179, 189,282, 546, 794, 818

0S-1621 167

0S-1625 55, 778, 794

0S-1973 414, 415, 578

0S-2318 397, 570

0T-0319 787

0T-0320 121, 123, 129, 130, 131

0T-0329 156, 575

0T-0772 326, 327, 328, 455, 456

0V-0375 350, 376

1A-0168 908

1A-0458 551

1A-1135 331, 349, 458, 466, 775,793, 795, 945

1A-1460 574, 921

1A-2029 326, 372, 455, 821

1A-5666 778

1A-8063 25, 30, 31, 793, 805, 822

1A-8537 19, 227, 300, 301, 349,372, 446, 464, 510, 571,

589, 804, 805, 940

1A-8651 12, 13, 16, 17, 47, 52, 226,238

1B-2706 918, 921, 925

1B-3867 890, 896, 897, 898

1B-4206 349

1B-4207 795

1B-4367 19, 21, 56, 228, 241, 301,349, 447, 465, 489

1D-4585 54, 350, 370, 509, 803, 820

1D-4586 400

1D-4593 15

1D-4608 89, 371, 375, 376, 513,526, 528, 589, 803, 804

1D-4609 396, 551, 569, 592

1D-4610 88, 90, 239, 241, 370, 509,524, 525, 527, 802

1D-4614 237

1021


PARTNumber

PAGENUMBER

1D-4615 84, 85, 86, 87

1D-4617 83

1D-4625 424

1D-4628 551

1D-4629 134, 395, 545, 547, 568,592

1D-4630 411, 412, 413, 423, 577,578, 834, 835

1D-4631 819

1D-4634 120, 121, 124, 125, 129,130, 132

1D-4635 822

1D-4637 836

1D-4639 195, 834

1D-4640 411, 412, 422

1D-4642 165

1D-4704 917

1D-5976 122, 123, 126, 127, 131

1F-7958 282

1G-5515 955

1G-5516 955

1G-6133 936

1H-5728 408, 409, 410, 411, 520,574, 575, 576, 668, 669,790, 791, 813, 831, 832,

833

1H-6227 21, 55, 211, 228, 239, 240,301, 343, 344, 345, 347,365, 366, 367, 373, 447,465, 471, 473, 482, 483,484, 485, 488, 506, 507,511, 520, 521, 522, 786,

792, 815

1H-7339 412, 697, 698, 715, 802,884, 887

1H-8128 19, 20, 45, 46, 47, 52, 227,238, 296, 297, 300, 326,327, 328, 329, 331, 446,455, 456, 458, 462, 464,466, 770, 775, 787, 793,

939, 940, 945

1H-8397 746, 753, 761

1H-8720 53, 133, 393, 394, 486,523, 543, 565, 566, 816

1H-9696 18, 258, 259, 260, 261,262, 299, 330, 346, 368,369, 434, 435, 445, 457,463, 472, 487, 508, 524,567, 747, 754, 762, 771,772, 773, 788, 789, 801,817, 944, 948, 952, 956

1J-4034 948, 949, 952, 953, 956,957

1K-3478 533

1K-6872 908, 915, 919, 922, 923,926, 929, 930

1K-7183 551, 552

1L-5072 21, 56, 228, 241, 301, 447,465, 489

PARTNumber

PAGENUMBER

1M-1408 5, 6, 7, 8, 9, 10, 39, 40, 41,222, 223, 224, 233, 234,235, 288, 290, 292, 293,319, 320, 321, 335, 336,337, 338, 339, 340, 341,359, 360, 361, 362, 440,441, 442, 450, 451, 452,460, 461, 468, 469, 470,476, 479, 502, 503, 504,558, 559, 583, 584, 742,744, 750, 751, 757, 759,765, 767, 781, 783, 936,

943

1M-1455 402, 404, 573, 713, 826

1M-3097 18, 19, 20, 55, 211, 227,239, 240, 262, 296, 297,299, 300, 326, 327, 328,329, 330, 331, 343, 344,345, 346, 347, 366, 367,368, 373, 435, 444, 445,446, 455, 456, 457, 458,462, 463, 464, 466, 471,472, 473, 482, 483, 484,485, 488, 507, 511, 659,685, 699, 747, 754, 762,770, 772, 773, 775, 786,789, 792, 793, 939, 940,944, 945, 948, 952, 956

1M-3121 344, 345, 367

1M-3669 386, 388, 539, 540, 555,696, 706, 707, 806, 807,

809

1M-3670 539, 696, 706, 707, 806,807, 809

1M-7749 333

1M-7750 333

1M-7795 333

1M-7796 333

1M-7911 346, 368, 472

1M-7912 346, 368, 472

1M-7913 346, 368, 369, 472, 524

1M-7914 18, 262, 299, 330, 346,368, 369, 435, 445, 457,463, 472, 487, 508, 524,567, 747, 754, 762, 772,773, 788, 789, 801, 817,

944, 948, 952, 956

1M-7915 346, 368, 472

1M-7916 346, 368, 369, 472

1M-7918 18, 262, 299, 330, 346,435, 445, 457, 463, 472,747, 754, 762, 772, 773,789, 944, 948, 952, 956

1M-8735 18, 262, 299, 330, 435,445, 457, 463, 747, 754,762, 772, 773, 789, 944,

948, 952, 956

1M-8736 18, 262, 299, 330, 435,445, 457, 463, 747, 754,762, 772, 773, 789, 944,

948, 952, 956

1M-8746 434

1M-8747 53, 372, 520, 821

1M-8863 328

PARTNumber

PAGENUMBER

1M-8864 328

1M-8867 326, 327, 455, 456

1M-9011 733, 738

1N-9701 784

1P-0963 376, 513

1P-1578 345

1P-2636 421

1P-2662 421

1P-8715 133, 393, 543, 565, 816

1P-8716 133, 393, 543, 565, 816

1P-8717 133, 393, 543, 565, 592,816

1P-8787 395, 396, 397, 547, 568,569, 570, 819

1P-8851 571

1P-8852 571

1P-9807 390, 541, 591

1P-9808 389, 390, 591

1P-9809 389, 390, 591

1P-9810 389, 390, 591

1Q-4604 540

1Q-4607 77

1Q-4609 519

1Q-4610 519

1Q-4621 147

1Q-4625 77

1Q-4626 77

1Q-4636 182

1Q-4640 519

1Q-4641 519

1Q-4649 170

1Q-4651 183

1Q-4658 119, 540

1Q-4659 119, 540

1Q-4669 119, 540

1Q-4689 119, 540

1Q-4690 119, 540

1Q-4717 799

1Q-4718 799

1Q-4727 70

1Q-4728 77

1Q-4729 77

1Q-4736 70

1Q-4739 144

1Q-4743 70

1Q-4744 77

1Q-4745 77

1Q-4752 682

1Q-4754 11

1022


PARTNumber

PAGENUMBER

1Q-4755 170

1Q-4769 696

1Q-4772 647, 666

1Q-4774 713

1Q-4918 119, 540

1Q-4919 119, 389, 540, 541

1Q-4921 363, 519

1Q-4922 363, 519

1Q-4924 77

1Q-4926 77

1Q-4930 77

1Q-4935 77

1Q-4937 70

1Q-4955 119, 540

1Q-4956 119, 389, 540

1Q-4958 77

1Q-4960 118, 378

1Q-4964 119, 540

1Q-4965 119, 540

1Q-4973 77

1Q-4984 78, 363, 519

1Q-4985 78, 363, 519

1Q-4994 77

1Q-4995 77

1Q-4996 77

1Q-4997 77

1R-1124 958

1R-1198 958

1R-1317 958

1R-5440 838

1R-6008 619, 842

1R-6009 619, 842

1R-6010 619, 842

1R-6011 619, 842

1R-8938 838

1R-8939 838

1R-9507 608, 837

1R-9814 619

1R-9833 866

1S-0454 416, 424, 578

1S-1859 72, 351, 352, 353, 354,355, 356, 357, 389, 495,496, 497, 498, 499, 500,501, 516, 517, 518, 557,586, 587, 779, 796, 797,

798, 810

PARTNumber

PAGENUMBER

1S-1860 35, 36, 37, 38, 42, 69, 71,72, 73, 74, 117, 208, 209,214, 215, 216, 232, 235,351, 352, 353, 354, 355,356, 357, 358, 383, 384,385, 386, 387, 388, 389,405, 477, 478, 495, 496,497, 498, 499, 500, 501,516, 517, 518, 536, 537,540, 553, 554, 555, 556,557, 586, 587, 590, 645,665, 681, 682, 779, 796,797, 798, 808, 809, 810,

875, 879, 880

1S-1863 389, 557

1S-1864 389, 557

1S-2174 543, 565, 816

1S-3511 420

1S-3512 420

1S-3513 408, 409, 574, 829, 830,831

1S-3514 420

1S-4445 716, 722, 728, 825

1S-4446 418, 716, 722, 728, 825

1S-4467 368

1S-4468 368

1S-6421 417, 418, 825, 827

1S-6943 389, 557

1S-7408 734

1S-8186 392, 562, 563, 592

1S-8725 406, 407

1S-8839 405

1S-8840 405

1S-8947 18, 53, 133, 156, 299, 327,328, 329, 330, 343, 344,345, 346, 365, 368, 369,392, 393, 394, 408, 409,410, 411, 412, 420, 422,423, 445, 456, 457, 463,472, 482, 483, 484, 485,486, 487, 508, 523, 524,543, 562, 563, 564, 565,566, 567, 574, 575, 576,733, 737, 740, 747, 754,762, 772, 788, 789, 800,801, 813, 814, 815, 816,817, 831, 832, 833, 944

1T-0068 412, 422, 423

1T-0720 132

1T-0765 79, 84, 85, 86, 87, 218

1V-3361 293, 319, 450, 460, 461

1V-4266 333

1V-4267 333

1V-4268 333

1V-4269 333

1V-4603 293, 319, 320, 450, 451,461

1V-4604 293, 319, 320, 450, 451,461

PARTNumber

PAGENUMBER

1V-4605 293, 319, 320, 450, 451,461

1V-4606 293, 319, 320, 450, 451,461

1V-5090 324

1V-5091 325

1V-5092 324

1V-5431 836

1V-5433 836

1V-7069 324, 769

1V-7072 320

1V-7074 451

1V-7075 320

1V-7077 503

1V-8173 512

1V-8176 512

1V-8187 512

1V-8202 512

1V-8623 320, 321, 451, 452, 742,743, 750, 757, 758, 765,

766, 783

1V-9611 296, 297, 326, 327, 328,329, 331, 444, 455, 456,458, 462, 466, 770, 775,

787, 793, 939, 945

1Z-9353 161, 167, 174

1Z-9478 177

1Z-9479 177

1Z-9974 118

2A-0047 571

2A-3241 341, 362

2B-7408 366, 367, 507

2D-0516 282

2D-0592 913

2D-3424 178

2F-0023 349

2F-0025 139, 140, 142

2F-8509 916, 917

2H-1190 90, 527, 818

2H-3757 550

2H-3856 135, 546

2H-3928 79, 80, 84, 85, 86, 87, 89,210, 218, 219, 237, 371,372, 411, 421, 510, 526,528, 576, 719, 723, 729,

803, 804, 821

2H-3931 420, 422, 423

2H-3934 394, 566, 698, 708, 709,714, 729

2H-3935 420, 421, 422, 423

2H-4145 12, 13, 14, 16, 17, 226,834, 937, 938

2H-6124 741

1023


PARTNumber

PAGENUMBER

2H-6338 53, 133, 156, 346, 368,369, 393, 410, 472, 486,487, 508, 523, 524, 543,565, 567, 575, 788, 801,

816, 817, 832, 833

2H-9247 120, 121, 122, 123, 124,125, 126, 127, 128, 129,

130, 131, 379

2J-3507 212, 213, 220, 221, 805,822, 823

2J-8172 927, 928

2K-2939 194, 201, 202

2K-4821 946, 947, 950, 951

2K-4973 920, 924, 927, 928

2M-0344 734, 740

2M-0849 264, 265, 266, 308, 309,350, 376, 436, 582, 776,

942

2M-2858 296, 297, 446, 482, 939,940

2M-5652 418, 716, 717, 722

2M-5656 183, 184, 194, 419, 420

2M-5657 417, 418, 826, 827

2M-6007 329

2M-6008 329

2M-7099 409

2M-7100 409

2M-7689 564

2M-7690 564

2M-8810 406, 828

2P-0347 18, 53, 133, 156, 299, 327,328, 329, 330, 343, 344,345, 346, 365, 368, 369,392, 393, 394, 408, 409,410, 411, 412, 413, 420,422, 423, 445, 456, 457,463, 471, 472, 482, 483,484, 485, 486, 487, 506,508, 523, 524, 543, 562,563, 564, 565, 566, 567,574, 575, 576, 577, 733,737, 740, 747, 754, 762,772, 786, 787, 788, 789,800, 801, 813, 814, 815,816, 817, 831, 832, 833,

944

2P-0854 390

2P-3201 331, 347, 371, 372, 373,395, 396, 397, 458, 466,473, 510, 511, 528, 547,568, 569, 570, 775, 792,793, 803, 804, 819, 821,

945

2P-3514 133, 393, 543, 565, 816

2P-3538 543, 565, 816

2P-4092 573

2P-4093 573

2P-6026 404, 573, 826

2P-8045 347, 373, 473, 511, 792

PARTNumber

PAGENUMBER

2P-8048 371, 372, 510, 528, 803,804, 821

2P-8052 412

2P-9419 417, 717, 718, 726, 727

2P-9423 417

2P-9424 417

2P-9484 403, 572

2P-9486 403, 572

2P-9653 384, 386, 388, 554, 555

2P-9654 384, 386, 388, 554, 555

2P-9655 384, 386, 388, 554, 555

2P-9656 384, 386, 388, 554, 555

2P-9669 390, 591

2P-9670 117, 384, 386, 387, 388,537, 554, 555, 556, 590

2P-9845 795

2R-1236 909, 910, 912

2S-0115 375, 376, 795

2S-0205 346, 472

2S-0253 418

2S-0278 578

2S-0736 370, 372, 509, 510, 589,803, 804, 805, 820

2S-2140 113, 115, 377, 378, 403,404, 538, 572, 573

2S-2181 18, 19, 20, 227, 262, 296,297, 299, 300, 326, 327,328, 329, 330, 331, 343,344, 345, 346, 347, 366,367, 368, 373, 435, 444,445, 446, 455, 456, 457,458, 462, 463, 464, 466,471, 472, 473, 482, 483,484, 485, 507, 511, 747,754, 762, 770, 771, 772,773, 775, 786, 787, 789,

792, 793

2S-2182 343, 344, 345, 347, 365,366, 367, 373, 471, 473,482, 483, 484, 485, 506,507, 511, 520, 521, 522

2S-5658 44, 78, 209, 216, 217, 236,295, 443, 748, 755, 763,

774

2S-5959 341, 362

2S-5960 341, 362

2S-6345 573

2S-7579 341, 362

2V-0250 826, 827

2V-1221 815

2V-1687 828

2V-3819 294, 324

2V-5114 363, 504, 519

2V-8627 800, 814

2W-1145 896

3A-4129 769

PARTNumber

PAGENUMBER

3A-4131 767

3A-4132 767

3A-4133 767

3A-4790 771

3A-8962 619

3A-8967 619

3A-8968 619

3A-8969 619

3A-9605 605, 607, 934

3A-9614 605, 607, 934

3A-9615 605, 607, 934

3A-9616 605, 607, 934

3A-9617 605, 607, 934

3B-1915 392, 562, 563, 564

3B-2968 802

3B-4506 262, 326, 327, 328, 329,343, 344, 345, 365, 392,435, 455, 456, 471, 506,562, 563, 564, 787, 815,

948, 952, 956

3B-4508 348, 350, 366, 367, 374,375, 376, 408, 409, 412,413, 507, 513, 574, 831,920, 921, 922, 924, 925,

929

3B-4510 333, 349, 397, 398, 570,571, 578, 748, 749, 755,

756, 763, 764, 836

3B-4512 333

3B-4514 411, 412, 413, 414, 415,416, 424

3B-4516 869

3B-8489 957

3D-4603 612, 613, 622, 904, 935

3E-3217 628, 629, 634, 641, 642,650, 651, 652, 653

3E-4356 381, 931

3E-4370 610, 611, 935

3E-8032 733, 736, 737, 738, 740

3H-2643 343

3H-7654 178, 185, 187, 194, 422,423, 577, 709, 835

3K-0453 943

3K-0715 201, 202

3K-2866 326, 327

3K-2889 28, 29, 32, 61, 62, 65, 231,244

3K-4221 348

3K-4222 348

3K-5234 159, 179, 189, 412, 422,823

3K-5235 411

3K-6060 921, 925

1024


PARTNumber

PAGENUMBER

3K-6113 120, 121, 122, 123, 124,126, 128, 129, 130, 131,150, 151, 154, 155, 165,

171, 379

3K-6620 328, 329

3K-6638 18, 299, 330, 445, 457,463, 747, 754, 762, 772,

789, 944

3N-0837 811

3N-3095 259, 260, 263, 264, 265,266, 434, 436, 776

3N-6411 909, 910, 912

3N-6412 909, 910, 912

3P-0615 390, 541, 591

3P-0616 390, 591

3P-0617 390, 591

3P-0618 390, 591

3P-0619 390, 541

3P-0620 390, 591

3P-0621 384, 554, 590

3P-0622 384, 387, 535, 537, 554,556, 590

3P-0623 384, 387, 535, 537, 554,556, 590, 695, 704, 705,

886

3P-0628 554, 590

3P-0815 911, 913

3P-0955 386, 388

3P-1088 354, 498

3P-1104 352, 357, 496, 501, 517,518, 586

3P-1109 518, 586

3P-1111 69, 72, 73

3P-1112 352, 354, 356, 496, 498,500, 797, 810

3P-1113 352, 354, 356, 496, 498,500, 797, 810

3P-1133 78, 363

3P-1134 78, 363

3P-1847 194, 201, 413, 420, 422,423, 687, 790, 791

3P-1848 413, 420, 422, 423, 687,790, 791

3P-1849 740

3P-1900 365, 506, 520, 521, 522,815

3P-2274 293, 319, 320, 335, 336,338, 339, 359, 360, 450,451, 460, 461, 468, 469,470, 479, 502, 503, 558,

559, 583, 584

3P-2482 195, 205

3P-3043 335, 336, 339, 359, 360,468, 469, 502, 503, 558,

559

PARTNumber

PAGENUMBER

3P-3044 335, 336, 339, 359, 360,468, 469, 502, 503, 558,

559

3P-3045 335, 336, 339, 359, 360,468, 469, 502, 503, 558,

559

3P-3046 335, 336, 339, 359, 360,468, 469, 502, 503, 558,

559

3P-3327 419

3P-3399 421

3P-3402 421

3P-3403 421

3P-3419 871

3P-3804 578

3P-3836 578

3P-3878 335, 338, 359, 360, 468,470, 479, 502, 558, 583

3P-3888 342, 363, 470, 560

3P-3889 342, 363, 470, 560, 584

3P-3890 342, 363, 470, 584

3P-3891 342, 363, 584

3P-3892 342, 584

3P-3893 342

3P-3894 342

3P-3896 342, 584

3P-3897 342

3P-3898 342

3P-4133 112, 375, 376

3P-4134 349

3P-4866 419

3P-5757 336, 339, 360, 469, 503

3P-5762 336, 584

3P-5927 354

3P-6123 420

3P-6600 836

3P-6954 424

3P-6955 424

3P-7153 335, 336, 337, 339, 340,359, 360, 361, 468, 469,502, 503, 504, 558, 559,

781

3P-7154 335, 336, 337, 339, 340,359, 360, 361, 468, 469,502, 503, 504, 558, 559,

781

3P-7155 337, 340, 361, 504, 781

3P-7156 337, 340, 361, 504, 781

3P-8272 343, 344, 345, 366, 367,471, 482, 483, 484, 485,

507, 786

3P-8283 160

3P-8432 392, 542, 562, 563, 564,800, 814

PARTNumber

PAGENUMBER

3P-8680 913

3P-8681 913

3Q-5391 78, 363, 799

3Q-6992 696

3Q-6993 667, 682, 875

3S-1349 150, 151, 152, 153, 154,155, 165, 171, 172, 178,

195, 200

3S-1356 200

3S-7090 391, 561

3S-7461 419, 420

3S-7837 406, 407

3S-8182 11, 225, 315, 342, 364,462, 505, 519, 561, 585,

588

3S-8252 391, 560, 561

3S-9138 391, 561

3S-9139 391, 561

3S-9140 391

3S-9199 561

3S-9993 391

3T-0356 11

3T-0358 11

3T-0360 11, 293, 442

3T-1248 194

3T-2758 177

3T-3206 368, 524, 589, 801, 817

3T-3207 346, 368, 369, 472, 487,508, 524, 567, 788, 801,

817

3T-3646 769

3T-3647 769

3T-3648 769

3T-3690 342, 363, 470, 480, 505,584

3T-3799 134, 135, 520, 521, 522,542, 544, 545, 546, 547

3T-3800 134, 135, 520, 521, 522,542, 544, 545, 546, 547

3T-3884 5, 7, 8, 9, 39, 40, 41

3T-3889 5, 7, 8, 9, 39, 40, 41, 222,223

3T-4283 263, 264, 265, 266, 436,776, 942, 949, 953

3T-4427 344

3T-4428 344

3T-4617 773

3T-4618 773

3T-5128 110

3T-5631 41, 234

3T-5634 9, 223

3T-5970 418

1025


PARTNumber

PAGENUMBER

3T-5971 418

3T-6269 156, 575, 832, 833

3T-6292 197, 199, 736

3T-6308 825, 827

3T-7192 136

3T-7195 136

3T-7392 135, 546, 818

3T-7710 136

3T-7711 136

3T-8405 41, 234

3T-8406 41, 234

3T-8491 828

3T-8493 177

3T-8494 418

3T-8496 177

3T-8497 418

3T-8499 177

3T-8501 177

3T-8502 177

3T-8556 418

3T-8557 418

3T-8558 418

3T-8559 418

3T-8560 418

3T-8561 418

3T-8562 418

3T-8563 418

3T-8564 418

3T-8565 418

3T-8580 39, 40, 41, 233, 234, 235,476

3T-8584 43, 236

3T-8586 43, 236

3T-8590 43

3T-8597 43, 236

3T-8601 5, 6, 7, 8, 9, 10, 39, 40, 41,222, 223, 224, 233, 234,235, 288, 290, 292, 440,

441, 442, 476

3T-9075 194, 201, 202

3T-9118 144, 162, 163

3T-9152 785

3T-9153 769, 785, 943, 944

3T-9154 769

3T-9529 195

3T-9530 195

3T-9536 12, 13, 14, 16, 17, 45, 46,47, 52, 226, 238, 937, 938

3T-9538 21, 228, 301, 447, 465

3T-9875 56, 241, 489

PARTNumber

PAGENUMBER

3T-9877 56, 241, 489

3V-1133 350, 375, 376, 513

3V-1727 785

3V-4045 958

3V-4527 812

3V-4745 795

3V-4746 795

3V-4764 795

3V-4812 822, 823

3V-5029 795

3V-5030 795

3V-5055 822

3V-5073 786

3V-5131 786

3V-5305 822, 823, 835

3V-5376 830

3V-7851 333

3V-8998 777, 794

3V-9002 777, 794

3V-9011 794

3V-9091 793

3V-9114 784

3V-9489 784

3W-2301 47, 52

3W-4144 107, 108, 109, 110

3W-4346 12, 13, 16, 17

3W-7675 550

3W-7684 550

3W-7687 550

3W-7691 550

3W-7771 551

3W-7772 551

3W-7773 551

3W-7774 551

3W-7778 529

3W-7779 529

3W-8120 531

3W-8123 531

3W-8134 530, 531

3W-8140 532

3W-8236 550

3W-8240 548, 549, 550

3W-8244 550

3W-8339 548

3W-8344 548, 549

3W-8396 529

3W-8398 529

3W-8399 529

PARTNumber

PAGENUMBER

3W-8407 467, 490

3W-8410 467, 490

3W-8489 532

3W-8492 532

3W-8495 532

3W-8536 491

3W-8546 551

3W-8549 551

3W-8772 533

3W-8775 533

3Y-4297 744, 751, 759

4B-3665 919, 926

4B-4280 333, 334

4B-6166 322, 323, 324, 453

4B-6620 405

4B-7255 411, 576

4B-7572 778

4B-9371 957

4C-2084 786

4D-3704 334, 349, 350, 400, 459,513, 794, 795

4D-3882 948, 949, 952, 953, 956,957

4E-0275 829, 830

4E-2887 805, 822

4E-8500 813

4E-8505 813

4F-6568 793, 805, 822

4F-7952 327, 328, 329, 456, 787

4F-8965 129

4H-9105 134, 346, 368, 392, 395,396, 397, 472, 542, 544,545, 547, 562, 563, 564,568, 569, 570, 714, 723,730, 800, 813, 814, 819

4H-9527 262, 435, 773, 948, 952,956

4H-9628 262, 435, 773, 948, 952,956

4I-4906 715

4I-6514 702

4I-7337 621

4I-7345 621

4I-7472 620

4I-7473 614, 618, 619

4I-7475 614, 616, 617, 618, 619,841, 842, 847

4I-7476 614, 616, 617, 618, 619,841, 842, 847

4I-7477 614, 616, 617, 618, 619,841, 842, 847

4I-7478 614, 616, 617, 618, 619,841, 842, 847

1026


PARTNumber

PAGENUMBER

4I-7479 614

4I-7488 621

4I-7489 622

4I-7538 614, 615, 616, 617, 618,619, 841, 842

4J-0520 935

4J-0526 746, 753, 761

4K-0173 834

4K-0684 178, 185, 186, 187, 194,202, 203, 204

4K-3916 323, 324, 453

4K-3918 323, 324, 453

4K-3919 322, 323, 324, 453

4K-5175 178, 185, 194

4K-5285 327, 456

4K-5286 327, 456

4K-7038 246, 249, 250, 251, 252,253, 322, 323, 426, 427,428, 429, 430, 431, 453,580, 581, 768, 941, 954,

955

4K-7128 324

4K-7348 333, 334

4K-9943 326, 327, 328, 455, 456,787

4K-9984 327, 456, 787

4L-6454 272, 274, 275, 278, 279,281, 282, 304, 305, 309,310, 437, 448, 449, 920,921, 922, 923, 924, 925,

927, 928, 929, 930

4L-9337 918

4M-0061 948, 949, 952, 953, 956,957

4M-0578 422, 423

4M-0660 741

4M-0740 323, 324, 453

4M-5989 353, 354, 355, 356, 497,498, 499, 500, 587, 796,

797, 810

4M-5991 354, 356, 498, 500, 587,797, 810

4M-5992 356, 500, 587, 797, 810

4M-6953 135, 546

4N-1230 740

4S-5898 135, 157, 166, 173, 412,413, 527, 546, 577

4S-6559 60, 61, 62, 65, 244

4S-8072 422, 423

4S-8099 412

4S-8101 423

PARTNumber

PAGENUMBER

4S-8984 53, 133, 134, 219, 346,365, 368, 369, 371, 372,392, 393, 394, 395, 396,397, 410, 411, 472, 486,487, 506, 508, 510, 520,523, 524, 528, 543, 544,545, 547, 562, 563, 564,565, 566, 567, 568, 569,570, 575, 576, 577, 788,800, 813, 814, 815, 816,817, 818, 819, 821, 829,

830

4S-9004 364

4S-9005 391

4S-9049 395, 396, 397, 547, 568,569, 570, 819

4S-9112 407

4S-9692 394, 566

4V-4106 325, 454

4V-4107 325, 454

4V-5374 471

4V-5376 471

4V-7410 342, 470, 505

5A-3187 246, 249, 250, 251, 252,426, 427, 428, 429, 430,580, 581, 941, 954, 955

5A-7524 72

5A-8374 346, 369, 472, 487, 508,567, 585, 788

5A-8375 53, 346, 369, 472, 486,487, 508, 567, 788

5C-0768 769

5C-0949 767

5C-4088 767, 768

5C-4089 768

5C-4092 768

5C-4094 768

5C-4095 768

5C-4314 771

5C-6565 97, 99, 100, 103, 104, 107,108, 109, 137, 138, 139,140, 272, 274, 275, 276,

304, 305, 437, 448

5C-6602 771

5C-8823 777

5C-9553 958

5E-7937 955

5E-7938 948, 952, 956

5E-7941 949, 953, 957

5F-3106 132, 135, 157, 158, 166,173, 408, 409, 412, 546,574, 577, 818, 829, 830,

831, 835

5F-3144 90, 394, 411, 527, 566, 576

5F-3926 325

5F-7207 493

PARTNumber

PAGENUMBER

5F-8000 89, 219, 365, 371, 372,506, 510, 526, 528, 803,

804, 815, 821

5G-2247 5, 6, 7, 8, 9, 35, 36, 37, 38,39, 40, 41, 69, 71, 72, 73,

208, 214, 215, 222, 223,232, 233, 234, 246, 249,251, 288, 290, 292, 293,319, 335, 338, 351, 352,357, 358, 359, 360, 426,427, 429, 440, 441, 442,450, 460, 461, 468, 470,476, 477, 478, 479, 495,496, 501, 502, 516, 517,518, 558, 580, 583, 628,634, 641, 650, 651, 652,659, 670, 671, 685, 686,700, 701, 711, 715, 724,

946, 950, 954

5G-5965 282

5G-5966 282

5G-9660 490

5G-9662 490

5H-0034 368

5H-1504 89, 371, 396, 526, 528,569, 589, 592, 803, 804

5H-6734 56, 241, 413, 489

5H-8848 18, 299, 330, 445, 457,463, 659, 685, 699, 747,754, 762, 772, 789, 944

5H-9107 325

5I-6125 4, 247, 248, 291, 614, 615,616, 617, 618, 619, 841,

842

5I-6140 614, 616, 618, 619

5I-6274 609, 610, 611, 612, 613,839, 935

5I-9336 609

5K-0216 12, 13, 14, 45, 46, 47, 226,238, 937

5K-0227 916, 917

5K-0305 343, 344, 471, 485, 786

5K-1770 331, 446, 458, 464, 466,792, 793

5K-2707 323, 324, 453, 616

5K-6191 18, 19, 20, 227, 262, 296,297, 299, 300, 326, 327,328, 329, 330, 331, 343,344, 345, 346, 347, 366,367, 368, 373, 435, 444,445, 446, 455, 456, 457,458, 462, 463, 464, 466,471, 472, 473, 482, 483,484, 485, 507, 511, 747,754, 762, 770, 771, 772,773, 775, 786, 787, 789,

792, 793

5K-7128 332

5K-7129 332

5K-7138 333, 334

5K-7141 332

5K-7142 332

1027


PARTNumber

PAGENUMBER

5K-7143 195, 333, 334

5K-7144 333, 334

5K-7247 333, 334

5K-7305 334

5K-7306 334

5K-7315 334

5K-7316 334

5K-8454 474, 512

5K-8566 325, 454

5K-9107 53, 346, 368, 369, 472,486, 487, 508, 523, 524,

567, 788, 817

5K-9423 324

5K-9424 324

5K-9457 323, 453

5K-9458 323, 453

5M-0627 347, 373, 473, 511, 792

5M-0633 349

5M-0634 349

5M-0635 349

5M-0636 349

5M-1245 409

5M-1246 411

5M-1247 412

5M-1667 420

5M-1669 411, 421, 576

5M-1712 397, 413

5M-1732 570

5M-1913 345, 366, 367, 507

5M-1914 346, 472

5M-2033 389, 557

5M-2035 405

5M-2043 53, 133, 156, 346, 368,369, 393, 410, 472, 486,487, 508, 523, 524, 543,565, 567, 575, 788, 801,

816, 817, 832, 833

5M-2057 932

5M-2466 564

5M-2894 12, 13, 14, 16, 17, 21, 47,52, 56, 79, 84, 85, 86, 87,

90, 132, 210, 218, 226,228, 237, 238, 241, 298,301, 372, 445, 447, 457,463, 465, 489, 527, 821,

937, 938, 944

5M-3022 391

5M-3038 412, 413

5M-4436 372, 510, 804, 821

5M-4443 89, 219, 371, 372, 510,526, 528, 803, 804, 821

PARTNumber

PAGENUMBER

5M-5000 259, 260, 261, 296, 297,298, 326, 327, 328, 392,434, 444, 455, 456, 462,482, 483, 484, 485, 520,521, 522, 542, 562, 770,771, 786, 787, 800, 813,

814, 815, 939

5M-5003 365, 506

5M-5004 365, 506

5M-5005 365, 506, 815

5M-5009 365, 506, 815

5N-4313 943

5P-0233 419

5P-0373 259, 260, 263, 264, 265,266, 434, 436, 776

5P-1075 272, 274, 275, 276, 284,285, 304, 305, 313, 437,

438, 439, 448

5P-1076 15, 49, 81, 82, 83, 96, 97,160, 161, 167, 174, 180,190, 205, 268, 269, 270,271, 272, 273, 274, 275,276, 277, 302, 303, 304,305, 307, 308, 437, 448,494, 521, 533, 548, 549,

939

5P-1608 737

5P-2228 24, 58, 61, 65, 161, 174,180, 190, 205, 212, 220,229, 230, 242, 243, 244,

467, 490

5P-2546 150, 151, 154, 155, 165,171

5P-2566 314, 434, 924, 925, 949,953

5P-3868 192, 193, 195, 732

5P-4028 806, 807

5P-4130 164

5P-4624 493

5P-4625 28, 29, 32, 231

5P-4683 246, 426

5P-5422 183, 184, 194

5P-5855 829

5P-6604 177

5P-7665 119, 149

5P-7971 61, 62, 65, 244

5P-8215 931, 932

5P-8221 181, 182, 192, 193, 732

5P-8222 192, 193

5P-8245 135, 157, 158, 159, 166,173, 189, 195, 257, 282,308, 309, 310, 433, 449,546, 581, 612, 818, 829

5P-8246 256

PARTNumber

PAGENUMBER

5P-8247 12, 13, 15, 16, 17, 19, 20,21, 47, 48, 49, 50, 51, 52,

53, 55, 56, 61, 62, 65, 201,202, 204, 226, 227, 228,238, 240, 241, 244, 263,300, 301, 316, 331, 347,373, 446, 447, 458, 464,465, 466, 473, 488, 489,511, 529, 585, 775, 778,791, 792, 793, 835, 940,

945

5P-8248 81, 82, 83, 84, 85, 86, 87,88, 90, 237, 239, 241, 370,

509, 524, 525, 527, 551,790, 802

5P-8249 120, 121, 122, 123, 124,125, 126, 127, 128, 129,130, 131, 132, 156, 157,158, 166, 170, 173, 551,

578, 778, 819, 834

5P-8250 183, 184, 834

5P-9120 697, 698, 715, 884, 887

5P-9532 421

5P-9681 120, 122, 128, 379

5Q-3215 628, 634, 641, 650, 651,652

5Q-3217 700

5Q-3252 696

5Q-3369 655

5S-0122 406

5S-0160 414, 415

5S-0161 414, 415

5S-0162 414

5S-0163 414

5S-0709 336, 337, 339, 340, 359,360, 361, 469, 503, 504,559, 584, 624, 625, 631,639, 646, 662, 663, 779,

781, 852, 856

5S-0710 336, 337, 339, 340, 359,360, 361, 469, 503, 504,

559, 584, 779, 781

5S-0726 342, 364, 561

5S-0753 337, 340, 361, 504, 779,781

5S-0754 337, 340, 361, 504, 624,625, 631, 639, 646, 662,663, 779, 781, 852, 856

5S-0820 342, 363, 470, 560

5S-0821 342, 363, 470, 560, 584

5S-0822 342, 363, 470, 584

5S-0823 342, 363, 584

5S-0834 342, 364, 561

5S-1532 420

5S-4822 342, 561

5S-6513 350

5S-6909 389, 390, 541

5S-6910 389, 390, 591

1028


PARTNumber

PAGENUMBER

5S-6911 389, 390, 591

5S-7379 272, 274, 275, 276, 284,285, 305, 313, 437, 438,

439, 448

5V-2906 294, 324

5V-3842 325

5V-3875 332, 459

5V-3876 332, 459

5V-4969 799

5W-3915 749, 756, 764

5W-4040 746, 753, 761

5W-4142 746, 753, 761

5W-4146 744, 752, 759

5W-4147 744, 752, 759

5W-4148 744, 751, 752, 759

5W-4149 744, 751, 752, 759

5W-4150 744, 751, 752, 759

5W-4151 744, 751, 752, 759

5W-4152 744, 751, 752, 759

5W-4154 745, 752, 760

5W-4158 746, 753, 761

5W-4159 746, 753, 761

5W-4166 752

5W-4168 746, 753, 761

5W-7283 744

5W-9834 745, 752, 760

5W-9836 751, 759

5Y-2373 143, 144, 146

6A-4713 768

6A-4725 771

6A-7527 769

6B-5278 250, 252, 253, 254, 428,430, 431, 432, 581, 941,

947, 951, 955

6B-5502 336, 337, 339, 340, 341,359, 360, 361, 362, 469,503, 504, 559, 584, 781

6B-5882 389, 557

6B-6682 333

6B-6863 937, 938

6C-9149 218

6F-7030 156, 575, 832, 833

6F-7831 829, 830, 831

6G-0712 212, 213, 220, 221

6H-1309 194, 201, 420, 422, 423,626, 627, 633, 640, 648,659, 670, 671, 685, 686,687, 709, 710, 790, 791,

802, 818, 853

6H-1717 350, 375, 376, 513

6H-2953 134, 395, 396, 397, 544,545, 547, 568, 569, 570,

819

PARTNumber

PAGENUMBER

6H-3977 156, 421

6H-6237 413, 577, 835

6H-7382 19, 20, 55, 211, 227, 239,240, 300, 331, 347, 373,446, 458, 464, 466, 473,488, 511, 775, 792, 793,

940

6I-6446 614, 618, 619

6I-6451 622

6I-6454 622

6I-6477 621

6I-6488 611, 935

6I-6489 611, 935

6I-6525 612, 613, 935

6I-6528 613

6I-6549 622

6I-6590 621

6I-7076 737

6I-7077 737

6I-7079 737

6I-7081 733, 736, 737, 738, 739,740

6I-7083 737

6I-7084 737

6I-7230 736

6I-7508 740

6I-7547 740

6I-7550 740

6I-7553 740

6I-7554 740

6I-7555 740

6I-8060 384, 387, 535, 537, 554,556

6I-8061 352, 357, 496, 501, 517,518

6I-8077 44

6I-8139 105, 107

6I-8141 94, 96

6I-8142 94, 96

6I-8454 696

6I-8455 696

6I-8648 736

6I-8651 682, 875

6I-8665 162

6I-8691 163

6I-8736 94, 95, 96, 97

6I-8737 94, 95, 96, 97

6I-8780 324, 454, 461

6I-8835 162

6I-8839 146

6I-9024 97

PARTNumber

PAGENUMBER

6I-9029 106, 108

6I-9034 112

6I-9036 109

6I-9053 109

6I-9109 70

6I-9239 113, 377

6I-9240 113, 377

6I-9241 113, 115, 377, 378, 538

6I-9242 113, 115, 377, 378, 538

6I-9243 113, 377

6I-9244 113, 377

6I-9397 671

6I-9398 671

6I-9399 671, 673, 878

6I-9453 666, 852, 858

6I-9454 593, 639, 647, 666, 852,858

6I-9573 11, 293

6I-9587 668, 669

6I-9597 668, 669

6I-9641 70

6I-9644 70

6I-9653 70

6I-9654 70

6I-9655 70

6I-9656 70

6I-9668 69, 358

6I-9670 69

6I-9671 69, 214, 216, 358

6I-9719 173

6I-9854 682, 875

6I-9893 696, 883

6I-9912 118, 378

6J-1536 128

6J-2515 187

6J-4081 212, 213

6K-0137 334, 459

6K-1261 505

6K-1330 81, 82

6K-1910 342, 363, 470, 480, 505

6K-3631 169

6K-3772 124, 126

6K-5640 28, 29, 31, 32, 231

6K-6444 578

6K-7917 195

6K-9860 18, 262, 299, 330, 435,445, 457, 463, 772, 773,789, 944, 948, 952, 956

1029


PARTNumber

PAGENUMBER

6K-9861 18, 262, 299, 330, 435,445, 457, 463, 747, 754,762, 772, 773, 789, 944,

948, 952, 956

6K-9880 18, 299, 330, 445, 457,463, 747, 754, 762, 772,

789, 944

6L-9210 589

6L-9211 592

6L-9965 420, 422, 423

6M-2001 220, 221, 805, 822, 823

6M-9613 275, 278, 279, 437

6P-0549 416

6P-2083 408, 409, 574, 831

6P-2647 390

6P-2648 390

6P-2786 390

6P-3068 390, 541, 559

6P-3069 390, 541, 559

6P-3303 412

6P-3307 412

6P-3596 406

6P-4234 336, 337, 339, 340, 359,360, 361, 469, 503, 504,

559, 781

6P-4235 354, 356, 498, 500

6P-4236 386, 388, 539, 540, 555

6P-4897 412

6P-4898 412

6P-6129 797, 810

6P-6130 797, 810

6P-7614 399

6P-7622 399

6P-7623 399

6P-7625 398

6P-7626 398

6P-7627 398

6P-7691 415

6P-7692 415

6P-7693 415

6P-7694 415

6P-8803 399

6P-8804 399

6P-8806 399

6P-8912 84, 85, 86, 87, 90, 129,130, 131, 132, 135, 158,173, 210, 218, 237, 527,

546, 818

6P-9107 406, 407

6S-3142 254, 432

6S-3143 254, 432

6S-3144 254, 432

PARTNumber

PAGENUMBER

6S-3145 253, 254, 431, 432

6S-3146 250, 252, 253, 254, 428,430, 431, 432, 581, 941,

947, 951, 955

6S-3147 254, 432

6S-3148 254, 432

6S-3149 256, 433

6S-3171 263, 264, 265, 266, 436,776, 942, 949, 953

6S-3172 263, 264, 265, 266, 776,942, 949, 953

6S-3178 252, 253, 254, 430, 431,432

6S-3179 253, 254, 431, 432

6S-3284 258, 260, 434

6S-3285 258, 260

6S-3419 254, 432

6S-3422 256, 433

6S-3429 282

6S-3451 260, 434

6S-3453 260, 434

6S-3495 258, 259, 260, 263, 264,265, 266, 434, 436, 776,

942, 949, 953

6S-3609 262, 435, 582, 948, 952,956

6S-3697 259, 260, 434

6S-6741 284, 285, 313, 438, 439

6S-6887 251, 252, 429, 430

6S-6888 251, 252, 429, 430

6S-6889 251, 252, 429, 430

6S-6890 251, 252, 429, 430

6S-7038 263, 264, 265, 266, 436,776, 942, 949, 953

6S-7040 263, 264, 265, 266, 436

6S-7123 255, 433

6S-7124 255, 433, 941, 955

6S-7220 434

6S-7715 258, 259, 260, 263, 264,265, 266, 434, 436, 776,

942, 949, 953

6S-7780 256

6S-8084 253, 431

6S-8085 253, 431

6S-8343 251, 252, 253, 429, 430,431

6S-8344 251, 252, 253, 429, 430,431

6S-8814 255, 433

6S-8815 255, 433

6S-8823 255, 433, 941, 955

6S-8824 255

PARTNumber

PAGENUMBER

6S-9049 246, 249, 251, 426, 427,429, 580, 946, 950, 954

6S-9051 251, 429

6S-9057 255, 433

6S-9059 255

6S-9102 255, 432

6S-9115 255, 432

6S-9627 282

6S-9628 282

6T-0232 11

6T-0253 43

6T-0511 765

6T-0513 769

6T-0517 769

6T-0720 90, 527

6T-0729 541

6T-1139 165, 179, 189

6T-1140 156, 157, 158, 166, 173

6T-1355 132

6T-1441 117

6T-2162 69, 73, 117

6T-2619 16, 17, 226, 938

6T-2620 16, 17, 226, 938

6T-2638 168, 169

6T-3220 84, 85, 86, 87

6T-3284 52, 238

6T-3285 52, 238

6T-4139 267

6T-4504 172

6T-4861 90, 527

6T-4871 84, 85, 86, 87, 129, 130,131, 132, 135, 158, 173,210, 218, 237, 546, 818

6T-4964 179, 188

6T-5114 135, 546

6T-5245 194, 201

6T-5246 178, 185, 195

6T-5247 150, 155, 159, 165, 171,179, 189

6T-5857 418

6T-5858 418

6T-6781 419, 420

6T-6782 574

6T-7455 505

6T-7456 505

6T-7500 158

6T-8049 197, 736

6T-8050 197, 736

6T-8435 733, 738

6T-8437 741

1030


PARTNumber

PAGENUMBER

6T-8438 734, 740

6T-8520 197, 199

6T-8521 197, 199

6T-8853 197, 199, 736

6V-0937 44, 78, 209, 216, 217, 236,294, 295, 442, 443, 481,

482

6V-1366 911, 913

6V-1723 113, 115, 143, 144, 145,146, 162, 163, 377, 378,

538

6V-1724 143, 144, 146, 162, 163

6V-1725 113, 143, 144, 145, 146,162, 163

6V-1726 165, 175, 176

6V-1728 168, 169, 175, 176

6V-1792 35, 36, 37, 38, 42, 69, 71,73, 74, 117, 208, 209, 214,

215, 216, 232, 235, 358,477, 478, 645, 665, 681,682, 798, 875, 879, 880

6V-1793 117

6V-1914 521, 522

6V-1915 521, 522

6V-2475 194, 201

6V-2614 178, 185

6V-2615 194, 201

6V-2698 178, 185, 195

6V-2699 16, 17, 21, 52, 56, 226,228, 238, 241, 301, 447,

465, 489, 938

6V-2700 150, 155, 159, 165, 171,179, 189

6V-2701 84, 85, 86, 87, 90, 129,130, 131, 132, 135, 158,173, 210, 218, 237, 527,

546, 818

6V-3213 931, 932

6V-3303 55, 488

6V-3531 212, 213, 218, 220, 221

6V-3532 859

6V-3669 211

6V-4316 11, 225, 294, 295

6V-4429 748, 749, 755, 756, 763,764

6V-4791 18, 262, 299, 330, 435,445, 457, 463, 543, 565,772, 773, 789, 816, 944,

948, 952, 956

6V-5200 839

6V-5590 916, 917

6V-5657 738

6V-5686 733, 737, 843, 849

6V-5841 119, 149

6V-5844 733, 737

PARTNumber

PAGENUMBER

6V-5845 89, 219, 526

6V-6768 19, 20, 227, 300, 446, 464,940

6V-6788 863

6V-7609 844, 845, 848, 864

6V-7644 890, 897

6V-7658 621, 626, 627, 633, 640,648, 850, 853, 860, 864

6V-7660 622, 845, 848

6V-7661 627, 633, 641, 649, 669,853

6V-7675 15

6V-8132 733

6V-8133 544

6V-8149 893, 901

6V-8181 107, 108, 109, 110

6V-8182 552, 777, 794

6V-8188 275, 278, 279, 281, 282,309, 310, 449, 918

6V-8197 264, 265, 266, 582

6V-8200 895

6V-8201 843

6V-8202 611, 903

6V-8237 380, 544, 546, 738, 866

6V-8336 612

6V-9167 84, 85, 86, 218

6W-1029 805, 823

6W-1030 805, 823

6W-1031 805, 823

6W-1032 805, 823

6W-3502 822

6W-3503 822

6W-3504 822

6W-5557 829

6Y-0216 194

6Y-0236 194

6Y-0454 377

6Y-0469 143, 146

6Y-0470 168, 176

6Y-0471 181, 192, 732

6Y-0472 197, 199, 736

PARTNumber

PAGENUMBER

6Y-0473 5, 6, 7, 8, 9, 12, 13, 14, 16,17, 19, 20, 21, 35, 36, 37,38, 39, 40, 41, 45, 46, 47,52, 55, 56, 69, 71, 72, 73,79, 80, 84, 85, 86, 87, 89,

90, 113, 115, 116, 117,120, 121, 122, 123, 124,125, 126, 127, 128, 129,130, 131, 132, 134, 135,143, 144, 146, 150, 151,152, 153, 154, 155, 157,158, 159, 162, 163, 165,166, 168, 169, 171, 172,173, 175, 176, 178, 179,181, 182, 185, 186, 187,189, 192, 193, 194, 195,197, 199, 201, 202, 204,208, 210, 211, 214, 215,218, 219, 222, 223, 226,227, 228, 232, 233, 234,237, 238, 239, 240, 241,246, 249, 251, 261, 288,290, 292, 293, 296, 297,300, 301, 319, 326, 331,335, 338, 347, 351, 352,357, 358, 359, 360, 371,372, 373, 379, 383, 384,387, 395, 396, 397, 401,403, 417, 426, 427, 429,434, 440, 441, 442, 444,446, 447, 450, 455, 458,460, 461, 462, 464, 465,466, 468, 470, 473, 476,477, 478, 479, 488, 489,495, 496, 501, 502, 510,511, 516, 517, 518, 520,521, 522, 526, 527, 528,534, 535, 536, 537, 538,542, 544, 545, 546, 547,553, 554, 556, 558, 568,569, 570, 572, 577, 580,583, 586, 590, 628, 629,634, 641, 642, 650, 651,652, 653, 659, 670, 671,685, 686, 687, 695, 700,701, 704, 711, 715, 717,724, 726, 770, 775, 792,793, 803, 804, 818, 819,821, 829, 830, 835, 886,937, 938, 939, 940, 945,

946, 950, 954

6Y-0553 150, 152, 154

6Y-0556 150, 152, 155, 165

6Y-0846 33, 34, 475, 631, 632, 636,637, 638, 639, 643, 644,

646, 662, 663

6Y-0847 656, 657, 677, 678, 679,680

6Y-0850 657, 664, 679, 680

6Y-0851 656, 657, 664, 666, 676,677, 678, 679, 680

6Y-0852 656, 657, 677, 678, 679,680

6Y-0891 189

6Y-0892 189

6Y-0893 189

1031


PARTNumber

PAGENUMBER

6Y-0925 133, 346, 365, 368, 369,371, 372, 392, 393, 394,395, 396, 397, 410, 411,413, 472, 486, 487, 506,508, 510, 523, 524, 528,543, 547, 562, 563, 564,565, 566, 567, 568, 569,570, 575, 576, 577, 788,800, 801, 803, 804, 813,814, 815, 816, 817, 819,821, 829, 830, 832, 833,

835

6Y-0929 40, 41, 234

6Y-0930 73

6Y-0935 246, 249, 250, 426, 427,428, 580, 581, 941, 946,947, 950, 951, 954, 955

6Y-0936 246, 249, 250, 426, 427,428, 580, 581, 941, 946,

947, 950, 954, 955

6Y-0937 246, 249, 250, 426, 427,428, 941, 946, 947, 950,

951, 954, 955

6Y-0938 246, 249, 250, 426, 427,428, 941, 946, 947, 950,

951, 954, 955

6Y-0939 246, 249, 250, 426, 427,428, 941, 946, 947, 950,

951, 954, 955

6Y-0940 246, 249, 250, 426, 427,428, 941, 946, 947, 950,

951, 954, 955

6Y-1053 659, 686

6Y-1054 659, 671, 686

6Y-1056 659, 670, 685, 686

6Y-1081 143, 146

6Y-1082 197, 199

6Y-1244 258, 433

6Y-1328 255, 432

6Y-1329 255, 432

6Y-1348 798

6Y-1381 255, 432, 581

6Y-1382 255, 432, 581

6Y-1383 255, 432

6Y-1384 255, 432

6Y-1385 255, 432, 581

6Y-1386 255, 432, 581

6Y-1577 182, 193

6Y-1578 182, 193

6Y-1579 181, 192

6Y-1589 255, 432

6Y-1590 255, 432

6Y-1596 255, 432, 433, 941, 955

6Y-1597 255, 432, 433, 941, 955

6Y-1607 656, 657, 664, 666, 676,677, 678, 679, 680

6Y-1608 656, 657, 664, 666, 676,677, 678, 679, 680

PARTNumber

PAGENUMBER

6Y-1711 250, 428, 581

6Y-1713 428, 581

6Y-1717 250, 428, 581, 941, 947,951, 955

6Y-1756 129, 130, 131

6Y-1757 120, 121, 122, 123, 124,125, 126, 127, 128, 129,

130, 131, 379

6Y-1781 523

6Y-1782 659, 660, 670, 672, 686,687, 878, 882

6Y-2040 784

6Y-2043 53, 486, 523

6Y-2057 181, 182

6Y-2110 261, 434

6Y-2126 682

6Y-2141 175, 176

6Y-2146 175

6Y-2147 175

6Y-2149 163

6Y-2150 163

6Y-2266 658, 668, 683, 684, 876,877, 881

6Y-2270 295, 296, 658, 668, 669,683, 684, 876, 877, 881

6Y-2272 658, 668, 683, 684, 876,877, 881

6Y-2508 195

6Y-2534 183

6Y-2536 183

6Y-2589 691, 692, 693, 694, 883

6Y-2590 691, 692, 693, 694, 883

6Y-2592 535

6Y-2593 535, 539

6Y-2594 535, 539

6Y-2748 693, 694, 883

6Y-2749 691, 692, 693, 694

6Y-2750 691, 692, 693, 694

6Y-2751 691, 692, 693, 694, 883

6Y-2790 700, 701

6Y-2791 700, 701

6Y-2792 700, 701, 884, 885, 887,888

6Y-2794 700

6Y-2887 175

6Y-2902 372, 510, 804, 821

6Y-2904 372, 510

6Y-2946 159, 179

6Y-2948 179

6Y-2949 179

6Y-2950 179

PARTNumber

PAGENUMBER

6Y-2951 179

6Y-2952 179

6Y-2953 179

6Y-3879 9, 223

6Y-3880 234

6Y-3908 53, 486

6Y-3914 143, 144, 146, 162

6Y-3917 65, 244

6Y-3921 65, 244

6Y-4006 160

6Y-4124 145

6Y-4744 259, 260, 261, 263, 264,265, 266, 434, 436, 776,

942, 949, 953

6Y-4898 657, 667, 683, 876

6Y-5026 560, 561

6Y-5185 480

6Y-5186 480

6Y-5323 659, 685, 699

6Y-5344 255, 581

6Y-5345 255, 581

6Y-5405 40, 234

6Y-5406 73

6Y-5412 40

6Y-5413 234

6Y-5414 40

6Y-5499 257, 433

6Y-5624 11, 225, 293

6Y-5661 462

6Y-5662 682

6Y-5685 697, 883

6Y-5686 676, 677, 678, 679, 680

6Y-5905 539

6Y-5906 540

6Y-6116 546

6Y-6201 659, 671, 686

6Y-6285 77

6Y-6286 77, 216

6Y-6287 77, 216

6Y-6289 363, 519, 588

6Y-6290 363, 519, 588

6Y-6291 78, 363, 588

6Y-6292 77, 78, 363, 588

6Y-6293 78, 363, 588

6Y-6294 77, 78, 216, 363, 588

6Y-6295 78, 363, 588

6Y-6296 77, 78, 216, 363, 588

6Y-6297 78, 363

6Y-6298 77, 78, 363

1032


PARTNumber

PAGENUMBER

6Y-6299 78, 363

6Y-6300 77, 78, 363

6Y-6380 230

6Y-6381 230

6Y-6382 220, 229, 230

6Y-6383 220, 229, 230

6Y-6389 77

6Y-6390 77

6Y-6391 77

6Y-6392 77, 78, 363, 519

6Y-6393 78, 363, 519

6Y-6394 77, 78, 363, 588

6Y-6395 78, 363, 588

6Y-6397 77, 78, 363, 588

6Y-6398 78, 363, 588, 799

6Y-6401 78, 363

6Y-6402 390

6Y-6404 77, 78, 363

6Y-6405 78, 363, 799

6Y-6411 78, 363, 588, 799

6Y-6412 77, 78, 363, 588

6Y-6481 39, 40, 233, 234, 476

6Y-6486 7, 8, 223, 288, 290, 440,441

6Y-6721 722

6Y-6722 722

6Y-6743 352, 354, 496, 498

6Y-6744 352, 354, 496, 498

6Y-6745 352, 354, 496, 498

6Y-6746 352, 354, 496, 498

6Y-6747 357, 501, 517, 518

6Y-6748 357, 501, 517, 518

6Y-6749 357, 501, 517, 518

6Y-6750 357, 501, 517, 518

6Y-7432 722

6Y-7433 722

6Y-7453 722

6Y-7592 719

6Y-7599 719, 723, 729

6Y-7602 719, 723

6Y-7603 719, 723

6Y-7610 722

6Y-7652 411, 576

6Y-8023 697, 698, 884, 887

6Y-8028 697, 698, 884, 887

6Y-8029 697, 698, 884, 887

6Y-8075 659, 685, 699

6Y-8077 659, 685, 699

PARTNumber

PAGENUMBER

6Y-8127 724, 730

6Y-8128 724

6Y-8129 724

6Y-8130 724

6Y-8131 724

6Y-8134 698, 708, 709, 714

6Y-8171 709, 710, 714, 720, 723,730

6Y-8172 709, 710, 714, 720, 723,730

6Y-8176 709, 710, 714, 720, 723,730

6Y-8177 710, 714, 720, 723, 730

6Y-8180 696

6Y-8185 779

6Y-8186 593, 624, 625, 631, 632,636, 637, 638, 639, 643,644, 646, 662, 663, 779,

852, 855, 856

6Y-8795 936

6Y-8852 700, 701

6Y-8950 941

6Y-8973 77

6Y-9024 66, 67, 514, 515, 707, 713

6Y-9261 7, 8, 223, 224, 288, 290,440, 441

6Y-9262 7, 8, 223, 224, 288, 290,440, 441

6Y-9263 7, 8, 223, 288, 290, 440,441

6Y-9264 7, 8, 223, 288, 290, 440,441

6Y-9267 40, 234

6Y-9268 40, 234

6Y-9339 709, 710, 714, 720, 723,730

6Y-9416 43, 236, 480

6Y-9474 224

6Y-9855 659, 685, 699

6Y-9856 659, 685, 699

6Y-9858 659, 685, 699

6Y-9925 24

6Y-9926 24

6Y-9932 29

6Y-9933 29

6Y-9934 32, 231

6Y-9935 32, 231

6Y-9939 29

6Y-9949 29

6Z-8243 129

7B-1115 201

7B-1756 333, 334

PARTNumber

PAGENUMBER

7B-3235 348, 374, 375

7B-7889 349

7B-7890 349

7B-7891 349

7B-7892 349

7C-8246 275

7D-1649 14, 48, 794

7D-5238 201, 202

7D-8508 137, 138, 139, 140, 141,142

7D-9749 263, 264, 265, 266, 436,776, 942, 949, 953

7F-5227 790

7F-6268 740

7F-8267 19, 20, 55, 211, 227, 239,240, 295, 296, 297, 298,300, 316, 326, 331, 343,344, 345, 347, 366, 367,368, 373, 446, 455, 458,462, 464, 466, 471, 473,485, 488, 507, 511, 770,775, 786, 792, 793, 939,

940, 945

7F-8268 482, 483, 484, 628, 629,634, 641, 642, 650, 651,652, 653, 746, 748, 753,

755, 761, 763, 774

7G-0343 168, 169, 175, 176

7G-0418 371, 528, 803

7G-1901 392, 562

7G-1902 392, 562

7G-2762 423

7G-2763 423

7G-3431 193, 732

7G-3766 177

7G-4332 19, 20, 21, 55, 56, 89, 90,113, 115, 116, 117, 134,135, 143, 144, 146, 162,163, 168, 169, 175, 176,181, 182, 192, 193, 197,199, 211, 219, 227, 228,239, 240, 241, 261, 296,297, 298, 300, 301, 326,331, 347, 371, 372, 373,377, 383, 384, 387, 395,396, 397, 401, 403, 417,434, 444, 446, 447, 455,458, 462, 464, 465, 466,473, 488, 489, 510, 511,520, 521, 522, 526, 527,528, 534, 535, 536, 537,538, 542, 544, 545, 546,547, 553, 554, 556, 568,569, 570, 572, 577, 590,695, 704, 717, 726, 770,775, 792, 793, 803, 804,818, 819, 821, 835, 886,

939, 940, 945

7G-4355 105, 106, 107, 108, 109,110

7G-4829 21, 228, 301, 447, 465

7G-4832 21, 228, 301, 447, 465

1033


PARTNumber

PAGENUMBER

7G-4833 21, 228, 301, 447, 465

7G-6442 143, 144, 146, 162, 163

7G-6448 147, 164

7G-6454 147, 164

7G-7150 177

7G-7198 175

7G-8400 375

7G-8513 374

7G-8517 374

7G-8807 422

7G-8808 422

7G-8809 412

7G-8810 412

7H-2621 421

7H-2623 156, 421

7H-3171 609, 610, 611, 621, 622,626, 627, 633, 640, 641,648, 649, 658, 659, 668,669, 683, 684, 685, 697,698, 699, 708, 709, 710,714, 719, 720, 723, 729,730, 746, 753, 761, 876,877, 881, 884, 887, 903,

935

7H-3596 744, 752, 759

7H-3597 293, 319, 320, 321, 335,336, 337, 338, 339, 340,341, 359, 360, 361, 362,450, 451, 452, 460, 461,468, 469, 470, 479, 502,503, 504, 558, 559, 583,584, 742, 744, 750, 751,757, 759, 765, 767, 781,

783, 936, 943

7H-3598 383, 384, 385, 386, 387,388, 405, 536, 537, 540,553, 554, 555, 556, 590,

808, 809

7H-3599 113, 115, 116, 377, 378,403, 404, 534, 535, 538,539, 572, 573, 806, 807

7H-3606 744, 752, 759

7H-3607 11, 44, 78, 209, 216, 217,225, 236, 294, 295, 315,342, 364, 443, 462, 482,505, 519, 561, 585, 588

7H-3608 119, 149, 164, 364, 390,391, 542, 560, 561, 588,

591

7H-3609 170, 177, 406, 407, 574

7H-4566 394, 566

7H-4571 53, 133, 393, 394, 486,523, 543, 565, 566, 816

7H-4573 394, 566

7H-4574 53, 133, 393, 394, 486,523, 543, 565, 566, 816

7I-7767 658, 684

7I-9091 866

PARTNumber

PAGENUMBER

7J-2036 79, 80, 84, 85, 86, 87, 120,121, 122, 123, 124, 125,126, 127, 128, 129, 157,

166, 173, 218, 379

7K-1089 296, 297, 326, 327, 328,329, 331, 444, 455, 456,458, 462, 466, 770, 775,

793

7K-1311 505

7K-1548 325, 454

7K-1825 322, 453, 768

7K-1826 322, 453, 768

7K-2016 322, 453, 768

7K-2017 246, 249, 250, 251, 252,253, 322, 323, 426, 427,428, 429, 430, 431, 453,580, 581, 768, 941, 946,947, 950, 951, 954, 955

7K-2018 320, 321, 322, 451, 452,453, 742, 750, 757, 765,767, 768, 783, 936, 943

7K-2019 322, 453

7K-2020 321, 322, 452, 453, 742,750, 757, 765, 783, 936,

943

7K-2049 322

7K-2051 453

7K-2943 332, 459

7K-2944 332, 459

7K-2961 332, 459

7K-2962 332, 459

7K-3703 474, 512

7K-3704 474, 512

7K-3711 474, 512

7K-3712 474, 512

7K-3713 474, 512

7K-3714 474, 512

7K-4347 513

7K-4438 334

7K-4439 459

7K-5448 156, 410, 575, 832, 833

7K-5449 156, 410, 575, 832, 833

7M-1889 400

7M-1890 400

7M-3308 397, 570

7M-3309 397, 570

7M-5112 396, 569

7M-8056 408, 409

7P-4695 530, 531, 532, 533

7P-4699 533

7P-5943 552

7P-5948 552

7P-5952 548, 551, 552

PARTNumber

PAGENUMBER

7P-6570 529

7P-6594 529

7P-6595 529

7P-7208 467, 490

7P-7368 492, 493

7P-7369 493

7P-7373 493

7P-7430 533

7P-7431 533

7P-7732 494

7P-7911 485

7P-7912 485

7P-9246 550

7P-9250 550

7R-0226 948, 949, 952, 953, 956,957

7R-0227 948, 949, 952, 953, 956,957

7R-0228 948, 949, 952, 953, 956,957

7R-0234 956

7R-0241 957

7R-2755 942

7R-2756 942

7R-2757 942

7R-2758 942

7R-8872 185, 186, 187, 204

7S-0706 342, 584

7S-7936 412

7S-7975 424

7S-8011 424

7S-8012 424

7S-8013 424

7S-8213 350

7S-8214 350

7S-9093 573

7S-9096 573

7S-9181 403, 404, 572, 573

7S-9182 403, 404, 572, 573

7S-9567 342, 584

7S-9601 403, 404, 572, 573

7S-9602 403, 404, 572, 573

7S-9603 403, 404, 572, 573

7S-9604 403, 404, 572, 573

7T-0157 178, 185, 195

7T-0158 84, 85, 86, 87, 90, 129,130, 131, 132, 135, 158,173, 210, 218, 237, 527,

546, 818

7T-0159 150, 155, 159, 165, 171,179, 189

1034


PARTNumber

PAGENUMBER

7T-0160 194, 201

7T-0353 305

7T-0715 181

7T-0716 181

7T-0723 182

7T-0724 183

7T-0737 118

7T-0961 185, 186

7T-0998 181, 182

7T-0999 181, 182

7T-1000 181, 182

7T-1093 150, 155, 159, 165, 171,179, 189

7T-1094 84, 85, 86, 87, 90, 130,131, 132, 135, 158, 173,218, 237, 527, 546, 818

7T-1158 195

7T-1243 200

7T-1248 170

7T-1310 828

7T-1312 390, 559

7T-1313 390, 559

7T-1315 462

7T-1825 195

7T-1826 195

7T-2275 168

7T-2276 168

7T-2282 118

7T-2283 168, 169, 175, 176

7T-2288 170

7T-2294 170

7T-2310 164

7T-2390 147, 164

7T-2392 147, 164

7T-2394 147, 164

7T-2750 118

7T-2770 171, 172

7T-3501 343, 471, 482, 484, 485

7T-3940 118, 378

7T-4030 16, 17, 21, 52, 56, 226,228, 238, 241, 301, 447,

465, 489, 938

7T-4031 90, 527

7T-4043 779

7T-4044 779

7T-4080 16, 17, 21, 52, 56, 226,228, 238, 241, 301, 447,

465, 489, 938

7T-4086 16, 17, 21, 52, 56, 226,228, 238, 241, 301, 447,

465, 938

PARTNumber

PAGENUMBER

7T-4087 16, 17, 21, 52, 56, 226,228, 238, 241, 301, 447,

465, 938

7T-4101 90, 527

7T-4106 90, 527

7T-4137 176

7T-4138 176

7T-4152 90, 527

7T-4173 460

7T-4174 460

7T-4175 460

7T-4176 460

7T-4177 460

7T-4178 460

7T-4509 392

7T-4539 338, 470, 479, 583, 584

7T-4540 338, 470, 479, 583, 584

7T-4541 338, 470, 479

7T-4542 338, 470, 479

7T-4543 338, 470, 479

7T-4544 338, 470, 479

7T-4562 365, 506, 520, 522, 589

7T-4607 183

7T-4608 182

7T-4628 293, 319, 450, 460, 461

7T-4636 335, 338, 359, 360, 468,470, 479, 502, 558, 583

7T-4645 357, 501, 517, 518, 586,587

7T-4646 357, 501, 517, 518, 586,587

7T-4657 387, 537, 556

7T-4658 387, 537, 556

7T-4659 387, 537, 556

7T-4660 387, 537, 556

7T-4661 387, 537, 556

7T-4662 387, 537, 556

7T-4700 161

7T-4722 84, 85, 86, 87, 90, 218,237, 527, 546

7T-5125 150, 155, 159, 165, 171,179, 189

7T-5133 130, 131, 132, 135, 158,173, 818

7T-5419 174

7T-5510 161, 167

7T-5959 180, 190

7T-5968 118, 378

7T-5969 118, 378, 541

7T-7054 143, 146

7T-7629 175

PARTNumber

PAGENUMBER

7T-7630 175

7T-9264 829

7T-9307 161, 167, 174

7T-9309 180, 190

7T-9311 196, 205

7T-9754 911, 913

7T-9755 911, 913

7T-9823 806, 807

7T-9824 806, 807

7T-9825 116, 534, 535, 539, 806,807

7V-0753 828

7V-0820 836

7V-0821 836

7V-0896 835

7V-0897 835

7V-3687 334, 459

7X-0288 272, 274, 437

7X-0289 275

7X-0307 161

7X-0310 542, 939

7X-0311 482, 483, 484, 485, 786

7X-0313 800, 813, 814, 815

7X-0318 520, 521, 522, 770, 771

7X-0325 939

7X-0343 136, 275, 493, 533

7X-0344 190, 533

7X-0345 160, 174, 205

7X-0346 533

7X-0347 59, 61, 62, 63, 64, 65, 243,244, 533

7X-0349 261, 937, 938

7X-0350 205

7X-0351 272, 274, 275, 276, 437

7X-0353 304, 305, 448

7X-0357 49

7X-0366 777, 794

7X-0368 550

7X-0380 550, 552

7X-0382 552

7X-0383 137, 138, 139, 140, 141,142, 160

7X-0384 552

7X-0385 550

7X-0386 180, 190

7X-0393 172

7X-0403 805, 822

7X-0407 835

7X-0434 203

1035


PARTNumber

PAGENUMBER

7X-0444 179, 188

7X-0448 261, 533

7X-0471 281, 282

7X-0488 493

7X-0510 902

7X-0513 822

7X-0515 530, 531, 896, 898, 903,904, 936

7X-0529 805, 822, 823

7X-0531 154

7X-0533 203

7X-0550 25, 27, 276, 277, 307, 308

7X-0563 462, 482, 483, 484, 485,520, 521, 522, 542, 770,771, 786, 800, 813, 814,

815

7X-0578 899

7X-0583 261

7X-0584 286, 312, 314, 434

7X-0590 137, 138, 139, 140

7X-0591 275

7X-0612 194

7X-0618 259, 260, 261, 296, 297,434, 444

7X-0622 840

7X-2440 660, 661, 675, 688, 689,690

7X-2454 699, 700, 701, 885, 888

7X-2475 491

7X-2553 307, 308, 379, 382, 529,531, 532, 898

7X-2554 483

7X-2555 622, 845

7X-2556 268, 269, 270, 271, 273,904

7X-2557 736

7X-2559 492

7X-2562 548, 549, 626, 640, 647,648, 667

7X-2563 530, 531, 532, 551, 660,673, 674, 687

7X-2564 548, 854

7X-2565 628, 629, 634, 641, 642,650, 651, 652, 653, 659,660, 670, 671, 672, 673,685, 686, 687, 877, 878,

882

7X-2575 697, 703, 708, 711, 714,715, 881, 883, 886

7X-2576 549, 711, 712, 882, 885,888

7X-2577 699

7X-2583 709, 710

7X-2584 714, 720, 723, 730

PARTNumber

PAGENUMBER

7X-3328 32, 231

7X-3335 279, 280, 281

7X-3392 908, 918

7X-4778 739

7X-7248 943

7X-7729 286, 312

7X-9835 941

7Y-0336 711, 712

7Y-1248 697, 884, 887

7Y-1810 722

7Y-1871 714

7Y-2155 621

7Y-2158 621

7Y-2159 621

7Y-2162 621

7Y-2581 660, 687

7Y-2914 725

7Y-5227 51

7Y-5232 724, 725, 734, 735

7Y-5233 98, 99, 100, 101, 102, 103,104, 111

7Y-5267 891

7Y-8973 724

7Z-8877 784

8C-1149 944

8C-3425 609, 837, 838

8C-3435 194

8C-4436 99, 100, 103, 104, 107,108, 109, 110, 160, 909,

910, 912, 916

8C-6857 99, 100, 103, 104, 107,108, 109, 110, 111, 112,

174

8C-6877 125, 127, 152, 153, 172,259, 260, 261, 296, 297,

434, 444, 462

8C-6913 137, 138, 139, 140, 141,142, 172, 180, 190, 550,

552

8C-8478 530, 531

8C-8723 721, 731

8E-0281 56, 241, 489

8E-0301 241

8E-0398 156

8E-0399 156

8E-0400 156

8E-0645 746, 748, 753, 755, 761,763, 774

8E-0830 834

8E-0831 834

8E-0855 355, 356, 499, 500, 587,796, 797, 810

PARTNumber

PAGENUMBER

8E-0885 40, 234

8E-0886 40, 234

8E-0887 40, 234

8E-0888 40, 234

8E-1886 716, 722, 728

8E-1887 716, 722, 728

8E-2355 73, 798

8E-2356 73, 798

8E-2357 73

8E-2358 73

8E-2359 73

8E-2360 73

8E-3332 745, 752, 760, 769

8E-3333 745, 752, 760

8E-3334 745, 752, 760

8E-3335 752, 760, 769

8E-4007 210, 237

8E-4008 210, 237

8E-4015 237

8E-4017 210, 237

8E-4023 237

8E-4055 417, 418, 825

8E-4056 417, 418, 825

8E-4057 417, 418

8E-4058 417, 418

8E-4059 144, 162, 163

8E-4060 144, 162, 163

8E-4061 143, 146

8E-4062 143, 146

8E-4160 40

8E-4272 385, 386, 388, 539, 540,555, 695, 696, 704, 706,707, 806, 807, 808, 809,

886

8E-4273 539, 806, 807, 808, 809

8E-4275 809

8E-4281 715

8E-4282 715

8E-4283 715

8E-4284 715

8E-4285 715

8E-4326 73

8E-4327 73

8E-4328 73

8E-4335 714

8E-4343 714

8E-4359 626, 627, 633, 640, 648,853

8E-4416 119, 540

8E-4417 119, 540

1036


PARTNumber

PAGENUMBER

8E-4418 540

8E-4419 540

8E-4424 390, 560

8E-4427 119, 540, 810

8E-4432 389, 390, 541

8E-4433 390, 541

8E-4434 389, 390, 541, 559, 591,811

8E-4435 390, 541, 559, 591

8E-4436 389, 390, 541, 559, 591

8E-4437 390, 541, 559, 591

8E-4457 143, 144, 146, 162, 163

8E-4458 143, 144, 146, 162, 163

8E-4494 363, 519

8E-4495 363, 519

8E-4496 78, 363, 519, 799

8E-4497 77, 78, 363, 519

8E-4498 77

8E-4499 363, 519, 588

8E-4500 363, 519, 588

8E-4501 363, 504, 588

8E-4502 363, 504, 519, 588

8E-4505 144, 162, 163

8E-4506 144, 162, 163

8E-4513 143, 146

8E-4514 143, 146

8E-4573 790

8E-4574 790, 791

8E-4576 802

8E-4577 802

8E-4579 818

8E-4580 818

8E-4621 714

8E-4622 714

8E-4623 714

8E-4686 722

8E-4713 797, 810

8E-4714 810

8E-4722 342, 363, 480

8E-4723 342, 363, 480

8E-4724 342, 470, 480, 505, 560

8E-4725 342, 363, 470, 480, 505,560, 584

8E-4727 342, 363, 470, 505

8E-4728 342, 363, 470, 505

8E-4729 342

8E-4799 294, 324, 461

8E-4800 294, 324, 461

8E-4805 324, 454, 461

PARTNumber

PAGENUMBER

8E-4807 324, 454, 461

8E-4808 324, 454, 461

8E-4972 11

8E-4974 43

8E-5031 628, 634, 641, 650, 651,652

8E-5032 628, 634, 641, 650, 651,652

8E-5035 628, 629, 634, 641, 642,650, 651, 652, 653

8E-5037 628, 629, 634, 641, 642,650, 651, 652, 653, 854

8E-5257 352, 357, 496, 501, 517

8E-5258 387, 535, 537, 556

8E-5281 479

8E-5456 818

8E-5467 790

8E-5468 791

8E-5599 628, 629, 634, 641, 642,650, 653, 854

8E-5600 594, 627, 633, 641, 649,669, 853

8E-5601 627, 633, 641, 649, 669,853

8E-5602 627, 633, 641, 649, 669

8E-5605 627, 633, 641, 649, 669

8E-5606 627, 633, 641, 649, 669

8E-5608 627, 633, 641, 649, 669

8E-5745 791

8E-6089 713

8E-6090 713

8E-6091 713

8E-6092 713

8E-6094 713

8E-6095 713

8E-6096 713

8E-6097 713

8E-6098 713

8E-6099 713

8E-6114 77

8E-6135 800, 814

8E-6573 21, 228, 301, 447, 465

8E-6619 120, 121, 122, 123, 124,125, 126, 127, 128, 129,130, 131, 150, 151, 152,153, 154, 155, 159, 165,171, 172, 179, 189, 379

8E-6643 173

8E-6644 195, 204

8E-6653 195

8E-6661 179

8E-6792 627, 633, 641, 649, 669

PARTNumber

PAGENUMBER

8E-6793 627, 633, 641, 649, 669

8E-6974 714

8E-6977 519

8E-6978 519

8E-7222 69, 214, 358, 665, 681,682, 879, 880

8E-7232 813

8E-7342 261, 434

8E-7343 261, 434

8E-7405 69, 74, 214, 215, 216, 358,665, 681, 682, 879, 880

8E-7406 69, 74, 214, 215, 216, 358,665, 681, 682, 879, 880

8E-7407 69, 71, 74, 214, 215, 216,358, 880

8E-7408 69, 71, 74, 214, 215, 216,358, 880

8E-7409 69, 74, 214, 215, 216, 358,880

8E-7410 69, 74, 214, 215, 216, 358,880

8E-7494 747, 748, 754, 755, 762,763, 774

8E-7496 748, 755, 763, 774

8E-7510 132, 135, 157, 158, 166,173, 546, 577, 818, 829,

830, 835

8E-7699 145

8E-7700 145

8E-7857 825

8E-7899 296, 297, 326, 444, 455,462

8E-8323 119, 540

8E-8324 119, 389, 540, 541

8E-8325 389, 390, 541

8E-8326 390, 541

8E-8522 236

8E-8523 236

8E-8526 11, 225

8E-8527 11, 225

8E-8585 593, 624, 625, 631, 632,636, 637, 638, 639, 643,644, 646, 662, 663, 852,

855, 856

8E-8586 593, 624, 625, 631, 632,636, 637, 638, 639, 643,644, 646, 662, 663, 852,

856

8E-8643 806

8E-8644 807

8E-8648 120, 121, 124, 125, 129,130, 132

8E-8783 62

8E-8812 667, 682

8E-8814 667, 682

1037


PARTNumber

PAGENUMBER

8E-8835 625, 647, 666, 852, 858

8E-8907 770, 787, 939

8E-9037 69, 74

8E-9039 70

8E-9396 148

8E-9399 118, 148

8E-9562 542

8E-9763 65, 244

8E-9766 24

8E-9767 24

8E-9799 118, 147, 164

8E-9805 593, 626, 640, 647, 667,785

8E-9810 11

8E-9812 11, 293

8E-9814 11

8E-9816 11, 293

8E-9820 40

8E-9821 43

8E-9823 43

8E-9825 43

8E-9827 43

8E-9922 97

8E-9923 97

8E-9928 106, 108

8E-9932 98, 99, 100, 101, 102, 103,104, 105, 106, 107, 108,

109

8F-0737 156, 421

8F-1190 577

8F-6711 134, 392, 395, 396, 397,413, 544, 545, 547, 562,563, 564, 568, 569, 570,577, 659, 660, 670, 671,672, 673, 685, 686, 687,800, 814, 818, 835, 878,

882

8F-8733 178, 185, 186, 187, 195,204

8F-8882 658, 668, 683, 684, 699,700, 701, 819, 829, 830,876, 877, 881, 884, 885,

887, 888

8F-9516 150, 151, 152, 153, 154,155, 159, 165, 171, 172,

179, 189

8G-0980 550

8G-1450 521, 522

8G-2049 552

8G-3170 462

8G-3172 462

8G-3351 550

8G-4077 493

PARTNumber

PAGENUMBER

8G-5258 26, 60, 61, 62, 64, 65, 243,244

8G-5335 65, 244

8G-6044 552

8G-6045 552

8G-6048 550, 552

8G-6781 467

8G-6792 467

8G-6793 467

8G-6921 490

8G-6926 490

8G-6927 490

8G-7148 533

8G-7149 533

8G-7150 533

8G-7575 529

8G-7576 533

8G-8031 550, 551

8G-8047 552

8G-8050 552

8G-9530 84, 85, 86, 87

8G-9824 110

8H-1383 139, 140

8H-2262 53, 133, 178, 185, 195,346, 365, 368, 369, 371,372, 392, 393, 394, 395,396, 397, 410, 411, 413,472, 486, 487, 506, 508,510, 520, 521, 522, 523,524, 528, 542, 543, 547,562, 563, 564, 565, 566,567, 568, 569, 570, 575,576, 577, 788, 800, 801,803, 804, 813, 814, 815,816, 817, 819, 821, 829,

830, 832, 833, 835

8H-2265 156, 261, 408, 409, 412,421, 434, 574, 628, 629,634, 642, 650, 651, 652,653, 746, 748, 753, 755,761, 763, 774, 831, 854

8H-5376 413

8H-5377 413

8H-5380 413

8H-5381 413

8H-5411 566

8H-5412 566

8H-5724 256, 257, 324, 433, 581

8H-6392 576

8H-6393 576

8H-7504 254, 324, 432

8J-7636 919, 926

8K-0321 787

8K-0323 783

8K-0589 219

PARTNumber

PAGENUMBER

8K-1390 828

8K-1392 828

8K-2271 785

8K-4054 828

8K-4438 794

8K-4444 794

8K-4699 783

8K-4753 826

8K-8305 785

8L-5560 253, 254, 431, 432

8M-0341 392, 563

8M-0342 392, 563

8M-0343 392, 563, 564

8M-0344 392, 563

8M-0383 576

8M-2619 402, 404, 573

8M-2620 402, 404, 573, 713, 826

8M-2621 713, 826

8M-4390 134, 392, 395, 396, 397,544, 545, 547, 562, 563,564, 568, 569, 570, 577,

687

8M-4395 520, 790, 791

8M-4436 365, 371, 372, 506, 510,528

8M-5661 331, 343, 344, 345, 347,366, 367, 373, 446, 458,464, 466, 471, 473, 482,483, 484, 485, 507, 511,

792, 793

8M-6041 343

8M-6238 539, 540, 696, 706, 707,806, 807, 808, 809

8M-6239 385, 386, 388, 539, 540,555, 696, 706, 707, 806,

807, 808, 809

8M-6910 716, 722

8M-7229 405

8M-7230 405

8M-7231 353, 354, 355, 356, 389,405, 497, 498, 499, 500,557, 587, 796, 797, 810,

861

8M-7232 405

8M-7288 389, 557

8M-7289 389, 557

8M-7290 355, 356, 389, 499, 500,557, 587, 796, 797, 810

8M-7454 341, 362

8M-7455 341, 362

8M-7456 337, 340, 341, 361, 362,504, 781

8M-7457 341, 362

8P-0021 150, 155, 159, 165, 171,179, 189

1038


PARTNumber

PAGENUMBER

8P-0429 390

8P-0430 389, 390

8P-0622 560

8P-1473 574

8P-1851 364

8P-5197 89, 219, 365, 371, 372,506, 510, 520, 521, 522,526, 803, 804, 815, 821

8P-5394 577, 829, 830, 835

8P-5429 422, 423

8P-5430 420, 422, 423

8P-5434 420, 422, 423

8P-5485 422, 423

8P-5486 422, 423

8P-5604 422

8P-5605 422

8P-5689 557

8P-6188 53, 346, 368, 369, 472,486, 487, 508, 523, 543,565, 567, 788, 816, 817

8P-6245 410, 575

8P-6255 410, 575, 832, 833

8P-6256 410, 575

8P-6650 408, 409, 412, 574

8P-6651 392, 395, 396, 397, 528,542, 544, 545, 547, 562,563, 564, 568, 569, 570,

800, 813, 814, 819

8P-6652 55, 211, 239, 240, 343,344, 345, 347, 366, 367,471, 473, 482, 483, 484,485, 488, 507, 786, 792

8P-7002 12, 13, 14, 16, 17, 21, 226,228, 301, 447, 465, 937,

938

8P-7003 16, 17, 21, 52, 56, 226,228, 238, 241, 301, 447,

465, 489, 938

8P-8489 571

8P-8490 571

8P-9453 342, 364, 561

8P-9454 364, 505

8S-0009 422

8S-0377 342

8S-0385 573

8S-0390 573

8S-0391 573

8S-0395 403, 404, 572, 573

8S-0396 404

8S-0943 417, 418

8S-0944 417, 418

8S-1723 417, 418

8S-1731 418

PARTNumber

PAGENUMBER

8S-2548 342

8S-2560 343, 345, 366, 471, 507,585

8S-2589 384, 386, 388, 540, 554,555, 590, 809

8S-2590 384, 386, 388, 540, 554,555, 590, 809

8S-2931 395, 396, 397, 547, 568,569, 570

8S-2981 342, 363, 784

8S-3887 309, 310, 449

8S-4468 390, 559, 560

8S-4745 946, 947, 950, 951

8S-4747 946, 947, 950, 951

8S-5653 156, 261, 408, 409, 412,421, 434, 574, 748, 753,755, 761, 763, 774, 831

8S-5654 371, 372, 510, 528

8S-5656 156, 261, 408, 409, 412,421, 434, 574, 748, 753,755, 761, 763, 774, 831

8S-5796 373, 511

8S-6212 919, 926

8S-9092 240, 347, 373, 473, 488,511, 585, 791, 792

8S-9093 805, 823

8T-0088 263

8T-0273 709

8T-0281 18, 53, 316, 487, 489, 745,753

8T-0282 12, 13, 16, 17, 47, 52

8T-0357 19, 20, 263, 300

8T-0359 47, 48, 49, 51

8T-0360 88, 524, 525, 527

8T-0363 710, 711, 715

8T-0375 847, 869

8T-0655 210

8T-0656 81, 82

8T-0657 83

8T-0667 380, 546

8T-0672 738

8T-0707 902, 903

8T-0722 266, 306

8T-1159 621, 627, 633, 641, 649,659, 669, 685, 699

8T-2272 84, 85, 86, 87, 90, 218,237, 527, 546

8T-2502 786, 918

8T-3282 84, 85, 86, 88, 89, 210,211, 212, 213, 218, 219,220, 221, 379, 524, 525,526, 527, 657, 667, 683

8T-3338 868

8T-3573 379

PARTNumber

PAGENUMBER

8T-4001 882, 885, 888

8T-4121 266, 268, 270, 271, 273,279, 280, 281, 303, 304,306, 308, 309, 314, 897,

898, 904

8T-4122 28, 29, 32, 62, 107, 108,109, 110, 136, 159, 160,174, 190, 205, 231, 268,269, 270, 271, 272, 273,274, 275, 276, 302, 303,304, 305, 307, 308, 379,437, 448, 483, 491, 492,493, 529, 530, 531, 532,533, 622, 777, 835, 937,

938

8T-4123 280, 281, 521, 530, 531,532, 548, 549, 551, 628,629, 630, 634, 635, 641,642, 650, 651, 652, 653,654, 655, 659, 660, 670,671, 672, 673, 674, 675,685, 686, 687, 689, 690,863, 877, 878, 882, 947,

951, 955

8T-4131 548, 549, 551, 675, 690

8T-4132 492, 493, 530, 531, 532,896, 903, 904

8T-4133 286, 312, 897

8T-4136 268, 270, 271, 273, 279,280, 303, 304, 308, 314

8T-4137 314

8T-4139 15, 26, 27, 49, 57, 60, 81,82, 83, 92, 93, 94, 98, 99,

101, 102, 105, 106, 268,269, 270, 271, 273, 276,277, 286, 302, 303, 304,307, 308, 312, 483, 490,491, 492, 494, 521, 891,

895, 899, 905

8T-4140 25, 26, 27, 29, 30, 31, 58,59, 60, 62, 63, 64, 317,

318, 379, 380, 381, 491,492, 904, 936

8T-4141 98, 99, 101, 102, 105, 106,110, 111, 112, 549

8T-4167 98, 99, 100, 101, 102, 103,104, 111, 548, 549, 551,699, 700, 701, 702, 703,710, 711, 712, 715, 733,

882, 885, 888

8T-4172 897

8T-4173 268, 302, 303, 896, 903

8T-4174 317

8T-4175 51, 531

8T-4176 267, 276, 277, 307, 308,533

8T-4178 897

8T-4181 112

8T-4182 898, 904

8T-4183 14, 15, 27, 48, 82, 276,277, 280, 281, 302, 309,314, 317, 493, 640, 905

8T-4184 91, 92, 94, 95, 279, 280,286, 307, 308, 312

1039


PARTNumber

PAGENUMBER

8T-4186 270, 271, 273

8T-4187 521

8T-4192 22, 23, 57, 60, 286, 312,491, 492, 494, 530, 531,

533, 613, 891, 899

8T-4193 530, 532, 626, 633, 934

8T-4194 27, 48, 81, 82, 83, 276,277, 283, 284, 310, 311,

317, 318, 494, 533

8T-4195 286, 309, 312

8T-4196 280, 281

8T-4205 958

8T-4223 22, 23, 24, 26, 27, 28, 29,32, 57, 58, 60, 61, 62, 65,91, 92, 93, 94, 95, 96, 97,

98, 99, 100, 101, 102, 103,104, 105, 106, 107, 108,109, 110, 160, 186, 212,213, 220, 221, 229, 230,231, 242, 243, 244, 267,275, 278, 279, 280, 281,282, 284, 285, 286, 307,308, 309, 310, 312, 313,317, 437, 438, 439, 449,483, 490, 491, 492, 493,494, 530, 531, 613, 830,891, 895, 899, 905, 915,923, 930, 935, 939, 949,

953

8T-4224 948, 949, 952, 953, 956,957

8T-4241 848

8T-4244 279, 280, 281, 308, 309

8T-4403 944

8T-4506 944

8T-4648 613, 839, 935

8T-4649 548, 549

8T-4778 25, 26, 27, 58, 59, 60, 105,106, 318

8T-4779 492, 493, 529, 531, 623,846

8T-4835 109, 186, 311, 493

8T-4896 80, 278, 279, 281, 282,296, 297, 309, 310, 437,444, 449, 462, 482, 483,484, 485, 520, 521, 522,542, 770, 786, 800, 813,814, 917, 918, 939, 957

8T-4910 14, 48

8T-4934 154, 178

8T-4956 22, 25, 27, 49, 98, 99, 101,102, 105, 106, 279, 280,281, 286, 308, 309, 312,492, 533, 548, 549, 895,

899

8T-4994 160, 161, 167, 174, 533,550, 552, 777, 793, 794

8T-5042 947, 951, 955

8T-5092 317

8T-5360 125, 127, 152, 153, 161,172

PARTNumber

PAGENUMBER

8T-5361 179, 188, 205, 822, 823

8T-5376 850, 859, 864

8T-5379 701, 702, 703

8T-5439 531, 660, 661, 688, 689,931, 932

8T-5460 548, 549, 551, 629, 630,635, 642, 653, 654, 655,660, 661, 674, 675, 688,

689

8T-5878 380, 381, 382, 551, 621,627, 633, 641, 649, 659,

669, 685

8T-5881 201, 202

8T-6346 848

8T-6381 521, 531

8T-6382 318

8T-6429 732

8T-6430 551, 655, 657, 667, 675,683, 689, 690, 852, 876,

931, 932

8T-6444 737

8T-6624 734

8T-6871 159, 160, 174, 190, 205,777

8T-7338 620, 843, 898, 931

8T-7530 941

8T-7971 909, 910, 912, 916

8T-8441 710, 714, 720, 723, 730

8T-8917 28, 29, 61, 62, 212, 213,220, 221, 278, 279, 281,282, 284, 285, 309, 310,313, 437, 438, 439, 449,948, 949, 952, 953, 956,

957

8T-8919 96, 97, 278, 279, 309, 310,449, 918, 920, 921

8T-8924 28, 29, 31, 32, 160, 161,167, 231, 533

8T-8927 205

8T-9389 829, 830

8T-9398 550

8T-9399 552

8T-9598 890, 896, 897, 898

8U-1692 748, 755, 763

8U-2926 744, 751, 759

8U-2927 744, 751, 759

8U-3456 744

8V-1715 660, 673, 674, 687

8V-2695 771

8V-3502 778

8V-3506 778

8V-3507 778

8V-4713 770

8V-4714 770, 939

PARTNumber

PAGENUMBER

8V-4772 26, 27, 28, 29, 32, 231

8V-8691 777

8V-9106 770

8V-9129 805, 823

8Y-0356 29

8Y-0622 258, 433

8Y-1009 275, 278, 279, 280, 281,282, 437

8Y-1198 58, 212, 242, 243

8Y-1199 58, 212, 242, 243

8Y-1208 62

8Y-1211 62

8Y-1254 62

8Y-1255 62

8Y-1697 261, 434

8Y-1698 261, 434

8Y-1728 548

8Y-1729 548

8Y-1730 548

8Y-1731 548

8Y-1732 548

8Y-1772 551

8Y-1773 551

8Y-1774 551

8Y-1775 551

8Y-1778 533

8Y-1779 532

8Y-1817 261

8Y-1841 491

8Y-1842 491

8Y-1853 490

8Y-1900 533

8Y-1944 532

8Y-1990 491, 492

8Y-1993 491, 492

8Y-1994 491, 492

8Y-2203 521, 522

8Y-2204 521, 522

8Y-2210 493

8Y-2211 493

8Y-2212 493

8Y-2276 493

8Y-2279 493

8Y-2281 492, 493

8Y-2429 494

8Y-3413 278, 279, 280, 281, 282,308, 309, 310, 437, 449

8Y-3437 282

8Y-3438 282

1040


PARTNumber

PAGENUMBER

8Y-3439 281

8Y-3440 281

8Y-5859 542

8Y-5861 542

8Y-6559 433

8Y-6625 532, 551

8Y-6627 548

8Y-6628 548

8Y-6629 531

8Y-6630 531

8Y-6640 313

8Y-6643 267

8Y-6644 267

8Y-6650 297, 444

8Y-6651 297, 444

8Y-6671 529

8Y-6672 529

8Y-7120 310, 449

8Y-7121 310, 449

8Y-7125 308, 309, 310, 449

8Y-8799 313

8Y-8800 313

8Y-8822 313

8Y-8823 313

8Y-8908 306, 448

8Y-8909 306, 448

8Y-8911 306, 448

8Y-8912 306, 448

8Y-8920 313

8Y-8921 313

8Y-8948 313

8Y-8949 313

8Y-8964 284, 438

8Y-8967 284, 285, 438, 439

8Y-8968 284, 285, 438, 439

8Y-8977 284, 285, 438, 439

8Y-8978 284, 285, 438, 439

9B-7237 80, 296, 297, 444, 462,482, 483, 484, 485, 520,521, 522, 542, 770, 800,

813, 814, 939, 957

9C-2498 746, 753, 761

9C-3416 835

9C-3628 835

9C-4224 800, 814

9F-2247 258, 259, 260, 263, 264,265, 266, 295, 296, 298,434, 436, 771, 776, 898,909, 910, 912, 916, 917,931, 932, 942, 949, 953

9G-0007 390

PARTNumber

PAGENUMBER

9G-1368 194, 201, 202

9G-1642 586

9G-2417 117

9G-2418 117

9G-2419 117

9G-2420 117

9G-2421 117

9G-2422 117

9G-3106 41, 234

9G-3110 5, 6, 7, 8, 9, 10, 39, 40, 41,222, 223, 224, 233, 234,235, 288, 290, 292, 440,

441, 442, 476

9G-4872 150, 151, 152, 153, 154,155, 159, 165, 171, 172,173, 178, 185, 186, 187,

189, 204, 829, 830

9G-5664 79, 80, 84, 85, 86, 87, 120,121, 122, 123, 124, 125,126, 127, 128, 129, 130,131, 132, 157, 158, 166,179, 195, 210, 218, 237,

379, 876, 877, 881

9G-6389 342, 470, 505

9G-6396 324, 454, 461, 936

9G-7033 832

9G-7034 832

9G-7046 577, 835

9G-7109 828

9G-7111 828

9G-7113 828

9G-8027 371, 372, 528, 803, 821

9G-8032 371, 372, 528

9G-8300 343, 471

9G-8301 343, 471

9G-8581 9, 223

9G-8582 9, 223

9G-8583 9, 223

9G-8584 9, 223

9G-8585 7, 8, 9, 223, 288, 290, 440,441

9G-8586 7, 8, 9, 223, 288, 290, 440,441

9G-8588 8, 9, 441

9G-8591 9, 223

9G-8592 5, 6, 7, 8, 9, 10, 222, 223,224, 288, 290, 292, 440,

441, 442

9G-9344 132

9G-9349 84, 85, 86, 87, 210, 218,237

9G-9351 21, 56, 228, 241, 301, 447,465, 489

9H-1024 54

PARTNumber

PAGENUMBER

9H-1031 134, 395, 423, 545, 547,568, 577, 592, 835

9H-6981 420

9H-6982 420

9H-7078 421

9H-7687 394, 411, 566, 576

9H-7759 410, 411, 575, 576, 832,833

9H-8489 392, 564

9H-9414 410, 411, 575, 576, 832,833

9K-0028 321, 452, 742, 750, 757,765, 767, 783, 936, 943

9K-0029 321, 452, 742, 750, 757,765, 767, 783, 936, 943

9K-3028 342, 470, 505

9K-4059 321, 452, 742, 750, 757,765, 767, 783, 936, 943

9K-4060 320, 321, 451, 452, 615,742, 750, 757, 765, 783,

936, 943

9K-4061 320, 321, 451, 452, 742,750, 757, 765, 783, 936,

943

9K-4062 321, 452, 742, 750, 757,765, 783, 936, 943

9K-6628 293, 319, 320, 321, 450,451, 452, 461, 615, 742,750, 757, 765, 767, 783,

936, 943

9K-6629 293, 319, 320, 321, 450,451, 452, 461, 615, 742,750, 757, 765, 767, 783,

936, 943

9K-8857 326, 455

9K-9113 326, 455

9M-0632 394, 566

9M-3786 733

9M-3818 364

9M-5045 376

9M-6743 424, 578

9M-6744 424, 578

9M-7783 334, 459, 777, 778, 794

9M-9729 134, 392, 395, 396, 397,542, 544, 545, 547, 562,563, 564, 568, 569, 570

9M-9730 53, 120, 121, 122, 123,124, 125, 126, 127, 133,134, 157, 166, 172, 173,178, 185, 219, 346, 365,368, 369, 371, 372, 392,393, 394, 395, 396, 397,410, 411, 472, 486, 487,506, 508, 510, 520, 521,522, 523, 524, 528, 542,543, 544, 545, 547, 562,563, 564, 565, 566, 567,568, 569, 570, 575, 576,577, 788, 800, 813, 814,815, 816, 817, 818, 819,

821, 829, 830

1041


PARTNumber

PAGENUMBER

9M-9758 392, 562

9N-2693 420, 422, 423

9N-4173 258, 259, 260, 434

9N-4174 255, 432

9N-4175 255, 432

9N-4327 255, 432, 941, 955

9N-4328 255, 432, 941, 955

9N-4501 255

9N-4502 255

9N-4680 12, 13, 16, 17, 47, 52, 226,238

9N-4683 12, 13, 16, 17, 47, 52, 226,238

9N-4733 212, 229, 230, 242, 243

9N-4736 230

9N-4737 230

9N-4740 230

9N-4741 230

9N-4742 230

9N-4743 230

9N-8381 944

9P-0201 150, 155, 165, 171

9P-1360 45, 46, 47, 52, 56, 238,241, 489

9P-1362 56, 241, 489

9P-1367 56, 241, 489

9P-1449 577

9P-2245 79, 80, 84, 85, 86, 87, 90,210, 218, 237, 527

9P-2661 147, 164

9P-2665 147, 164

9P-3308 412

9P-3309 412

9P-7782 331, 458, 466, 775, 793,945

9P-7786 331, 458, 466

9S-0312 395, 547, 568, 819

9S-1029 578

9S-1030 578

9S-1043 398

9S-1044 398

9S-1045 398, 571

9S-1046 398, 571

9S-1322 120, 121, 124, 125, 128,129, 130

9S-1363 822, 823

9S-1366 831

9S-1669 399, 400

9S-1670 399, 400

9S-1671 399, 400

PARTNumber

PAGENUMBER

9S-1838 69, 71, 72, 73, 74, 214,215, 216, 351, 352, 353,354, 357, 358, 495, 496,497, 498, 501, 516, 517,518, 586, 587, 681, 682,

880

9S-2727 406, 407, 574

9S-2728 420

9S-3567 346, 368, 369, 472, 487,508, 524, 567, 788, 801,

817

9S-3581 53, 133, 346, 368, 369,393, 472, 486, 487, 508,523, 524, 543, 565, 567,

788, 801, 816, 817

9S-3582 53, 133, 346, 368, 369,393, 472, 486, 487, 508,523, 524, 543, 565, 567,

788, 801, 816, 817

9S-4324 408, 574, 819, 831

9S-4325 408, 574

9S-4326 408, 574

9S-4536 577, 835

9S-4540 577, 829, 830, 835

9S-5293 571

9S-5294 571

9S-7221 408, 409, 574

9S-8245 348, 374, 375

9S-8246 348, 374, 375

9S-8257 348, 375

9S-8258 348, 375

9S-8304 411, 576

9S-8320 368, 523, 524, 801, 817

9S-8321 394, 566

9S-8322 421

9S-8353 348

9S-8354 348

9S-8358 348

9S-8359 348

9S-9534 347, 373, 473, 511

9S-9535 347, 373, 473, 511, 792

9S-9651 560

9T-2584 739

9U-0371 823

9U-0375 823

9U-8451 95, 96, 97

9U-8456 96, 97

9U-8457 95, 96, 97

9U-8459 95, 97

9U-8464 95, 97

9U-8468 112

9U-8786 96

9U-8791 96, 97

PARTNumber

PAGENUMBER

9U-9062 73

9U-9065 296, 297, 444

9U-9198 24

9U-9201 105, 107, 109

9U-9204 105, 107, 109

9U-9206 96

9U-9209 96

9U-9577 170

9W-0922 142

9W-0929 140

9W-1057 521, 522, 542

9W-1058 542

9W-1059 521, 522, 542

9W-1060 542

9W-1850 177

9W-1851 177

9W-1852 177

9W-1853 177

9W-1854 177

9W-1855 177

9W-1867 183

9W-1870 183

9W-1996 193

9W-1997 193

9W-1999 193

9W-2142 156, 261, 408, 409, 412,421, 574, 628, 629, 634,641, 642, 650, 651, 652,653, 746, 748, 753, 755,761, 763, 774, 831, 854

9W-2143 746, 748, 753, 755, 761,763, 774

9W-2144 748, 755, 763, 774

9W-2145 746, 748, 753, 755, 761,763, 774

9W-2146 316, 629, 634, 642, 653,660, 670, 672, 673, 687,699, 700, 701, 710, 715,720, 724, 730, 733, 734,737, 738, 740, 741, 746,748, 753, 755, 761, 763,774, 790, 791, 802, 818,834, 878, 882, 884, 885,

887, 888

9W-2201 420, 422, 423, 626, 627,633, 640, 648, 659, 670,671, 685, 686, 687, 709,710, 714, 790, 791, 802,

818, 853

9W-2202 791

9W-2204 659, 671, 686, 790, 791

9W-2210 818

9W-2212 700, 701, 818

9W-2379 943

9W-2423 90, 527

1042


PARTNumber

PAGENUMBER

9W-2738 170

9W-2743 169

9W-2744 169

9W-2755 168, 169, 175, 176

9W-3137 593, 624, 625, 631, 632,636, 637, 638, 639, 643,644, 646, 662, 663, 852,

855, 856

9W-3138 593, 624, 625, 631, 632,636, 637, 638, 639, 643,644, 646, 662, 663, 852,

855, 856

9W-3198 790

9W-3359 802, 818

9W-3361 33, 34, 475, 593, 624, 625,631, 632, 636, 637, 638,639, 643, 644, 646, 656,657, 662, 663, 664, 666,676, 677, 678, 679, 680,

852, 855, 856, 874

9W-3550 139

9W-3560 142

9W-3563 403, 572

9W-3619 593, 624, 625, 631, 632,636, 637, 638, 639, 643,644, 646, 662, 663, 852,

855, 856

9W-3955 11

9W-4025 140

9W-4194 178, 185, 186, 187, 195,204

9W-4195 194

9W-4264 181, 192

9W-4265 168, 176

9W-4334 255, 433

9W-4335 255, 433

9W-4355 834

9W-4381 66, 67, 514, 515, 707, 713,883

9W-4465 193

9W-4480 150, 151, 152, 153, 155,165, 171, 172

9W-4481 150, 151, 152, 153, 155,165, 171, 172

9W-4488 178, 185, 186, 187

9W-4489 178, 185, 186, 187

9W-4651 737

9W-4652 740

9W-4960 802

9W-4961 802

9W-4962 802

9W-5187 43, 236

PARTNumber

PAGENUMBER

9W-5224 18, 19, 20, 55, 211, 227,239, 240, 262, 299, 300,326, 327, 328, 329, 330,331, 343, 344, 345, 346,347, 366, 367, 368, 373,435, 444, 445, 455, 456,457, 458, 462, 463, 464,466, 471, 472, 473, 483,484, 485, 488, 507, 511,747, 754, 762, 770, 772,773, 775, 786, 787, 789,792, 793, 944, 945, 948,

952, 956

9W-5265 182

9W-5266 182

9W-5408 371, 372, 510

9W-5411 371, 372, 510

9W-5449 212, 213, 220, 221

9W-5581 135, 546

9W-5582 135, 546, 818

9W-5588 144, 162

9W-5723 193

9W-5724 193

9W-5826 193

9W-5828 193

9W-5933 192, 732

9W-5934 192, 732

9W-6037 178

9W-6038 178

9W-6039 178

9W-6174 18, 299, 330, 445, 457,463, 747, 754, 762, 772,

789, 944

9W-6484 810

9W-6632 135, 546, 818

9W-6714 834

9W-6715 834

9W-6716 834

9W-6717 834

9W-6718 834

9W-6726 784

9W-6727 784

9W-6728 784

9W-6854 182

9W-7259 574

9W-7267 203

9W-7269 203, 204

9W-7882 154

9W-7884 154

9W-7939 224

9W-7984 11, 225

9W-8045 746, 753, 761

9W-8047 158

PARTNumber

PAGENUMBER

9W-8182 235

9W-8183 235

9W-8191 43, 236

9W-8320 417

9W-8326 11, 225

9W-8328 177

9W-8350 347, 473

9W-8353 347, 473

9W-8356 395, 396, 397, 568, 569,570

9W-8359 395, 396, 397, 568, 569,570

9W-8381 417

9W-8709 158

9W-8710 158

9W-8878 152

9W-8936 403, 572

9W-8937 403

9W-8938 403

9W-9058 113, 115, 116, 377, 378,383, 385, 534, 535, 536,

538, 553

9W-9059 535

9W-9060 535

9W-9061 535

9W-9062 535

9W-9265 256, 257, 433, 581

9W-9351 593, 625, 639, 647, 666,852, 858

9W-9352 647, 666

9W-9451 633, 640, 648

9W-9455 626, 627, 633, 640, 648,668, 669

9W-9498 135, 546, 818

9W-9499 171, 172, 179, 189

9W-9621 197, 199

9W-9625 732

9W-9674 168, 176

9W-9675 143, 146

9W-9844 157, 158, 166, 173

9X-0941 908, 920, 921, 924, 925

9X-2327 45, 46

9X-6618 732

9X-8257 25, 26, 27, 58, 59, 60, 105,106, 317, 318, 623, 843,845, 846, 848, 849, 850,

860, 904, 934

9X-8258 720, 724, 725, 730, 731

9X-8268 18, 51, 316, 487

9X-8271 45, 46

9X-8399 718, 722, 732, 734, 735

9X-8898 159

1043


PARTNumber

PAGENUMBER

9X-8916 50, 51

9Z-9261 541

9Z-9263 118, 541

9Z-9267 118

Use Cat 580, 581, 582, 583, 585,586, 587, 588, 589, 590,

591, 592, 593

Parts sales Kit Undercarriage7th Edition

PECP3003-06www.cat.com

© 2010 Caterpillar • All Rights Reserved • Printed in USACAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

cat® dealers define world-

class ProdUct sUPPort.

We offer you the right parts and service

solutions, when and where you need them.

The Cat Dealer network of highly trained

experts keeps your entire fleet up and running

to maximize your equipment investment.

7th Edition Pa

rts sales Kit U

nd

ercarria

ge

ales kit undercarriage - monarch parts

Documents