ALBIN PUMP ALHHOSE PUMPS

Albin Pump Headquarters

155 Commerce Blvd., Loveland, OH 45140

Phone: (513) 583-4907

Toll Free: (888) 425-9494

Fax: (513) 583-4810

albinpumpusa.com

ALBIN PUMP ALHHOSE PUMPSALH

This pump summarizes what we at ALBIN PUMP want to achieve : better pump solutions for our customers. Our design enhances the pump’s simplicity and robust principle.

ADVANTAGES

No mechanical seal or stuffing box

Robust, ductile iron casing

Suitable for aggressive or viscous fluids

Meters highly corrosive chemicals

Fully self-priming up to 27 ft

Dry run continuously

Outlet pressures up to 220 psi

Very easy maintenance

Heavy-duty bearings, greased for life

Two-year warranty

Plug and Play

Perfect volumetric flow

Bi-directional flow

Close coupled

We have combined the best available materials with smart design solutions in order to maximize running time and minimize maintenance.

Two shoes mounted at 180° on a rotating wheel compress a reinforced rubber hose that contains a fluid to be pumped.

The compression of the hose by the rotating shoes creates continuous suction at the inlet of the pump and pushes the fluid to the outlet of the pump.

The pump casing contains a lubricant that reduces friction and ensures the best pump performance with minimum maintenance.

The pumped liquid is in contact with only the interior of the rubber hose, thus permitting the pumping of a wide variety of reactive fluids.

EXPERIENCED INNOVATORS

30 years experience in HOSE PUMPSThe ALH hose pump is in many ways the future of pumping. The ALH series pump is an extremely reliable pump

with a wide performance range, up to 660 gpm and 220 psi, which can handle most fluids in most applications.

ALBIN PUMP ALHThe latest design in hose pumps.

FLOW CURVES ALBIN ALH ALH

145

PSI

109

PSI

72 P

SI

217

PS

I

100°F

120°F

140°F

155°F

170°F

145

PSI

109

PSI

72 P

SI

217

PS

I

100°F

120°F

140°F

155°F

170°F

145

PSI

109

PSI

72 P

SI

217

PS

I

100°F

120°F

140°F

155°F

170°F

145

PSI

109

PSI

72 PSI

217

PSI

100°F

120°F

140°F

155°F

170°F

Continuous 24/24h

10

462

20

924

30

1387

40

1849

50

2311

60

2773

70

3236

80

3698

90

4161

7.5

ALH 50

5.36

Pump speed (RPM)

Flow (GPH)

Intermittent* Occasional*

Tem

per

atur

e (°

F)

Installed power (HP)

Continuous 24/24h

10

607

20

1215

30

1823

40

2430

50

3037

60

3645

70

4253

80

4860

90

5468

7.5

10

ALH 65

5.36

Pump speed (RPM)

Flow (GPH)

Intermittent* Occasional*

Tem

per

atur

e (°

F)

Installed power (HP)

Continuous 24/24h

5

12.1

10

24.2

15

36.3

20

48.4

25

60.5

30

72.6

35

84.7

40

96.9

45

109

50

121

15

20

ALHX 80

Pump speed (RPM)

Flow (GPM)

Intermittent* Occasional*

Tem

per

atur

e (°

F)

Installed power (HP)

Continuous 24/24h

5

48.4

10

96.8

15

145.3

20

193.7

25

242

30

291

35

339

40

388

40

30

50

ALH 125

Pump speed (RPM)

Flow (GPM)

Intermittent* Occasional*

Tem

per

atur

e (°

F)

Installed power (HP)

* Intermittent use : Minimum of 1 hour stop after 2 hours use * Occasional use : Maximum 1 hour per day

145

PSI

109

PSI

72 PSI

217

PS

I

100°F

120°F

140°F

155°F

170°F

Continuous 24/24h

10

211

20

422

30

634

40

845

50

1057

60

1268

70

1479

100

2113

80

1690

110

2324

90

1902

120

2536

ALHX 40

Pump speed (RPM)

Flow (GPH)

Intermittent* Occasional*

Tem

per

atur

e (°

F)

Installed power (HP)

145

PSI

109

PSI

72 PSI

217

PS

I

100°F

120°F

140°F

155°F

170°F

Continuous 24/24h

5

15.4

10

30.8

15

46.2

20

61.6

25

77

30

92.4

35

107.9

40

123.2

45

139

50

154

20

25

ALH 80

15

Pump speed (RPM)

Flow (GPM)

Intermittent* Occasional*

Tem

per

atur

e (°

F)

Installed power (HP)

145

PS

I

109

PSI

72 P

SI

217

PS

I

100°F

120°F

140°F

155°F

170°F

Continuous use 24/24h

5

26.4

10

52.8

15

79.2

20

105.7

25

132.5

30

158.5

35

185

40

211

45

238

20

15

25

ALH 100

Pump speed (RPM)

Flow (GPM)

Intermittent* Occasional*

Tem

per

atur

e (°

F)

Inst

alle

d p

ower

(HP

)

3

4

Pump speed (RPM)

Flow (GPH)

FLOW CURVES ALBIN ALHALH

* Intermittent use : Minimum of 1 hour stop after 2 hours use * Occasional use : Maximum 1 hour per day

100°F

120°F

140°F

155°F

170°F

117 PSI

45 PSI

8 Bars

3 Bars

117 P

SI

45 PSI

100°F

120°F

140°F

155°F

170°F

45 P

SI

117

PSI

100°F

120°F

140°F

155°F

170°F

45 P

SI

117

PSI

100°F

120°F

140°F

155°F

170°F

145

PSI

109

PSI

72 PSI

217

PSI

100°F

120°F

140°F

155°F

170°F

3 Bar

s

8 Ba

rs 145

PSI

109 PSI

72 PSI

217

PSI

100°F

120°F

140°F

155°F

170°F

145

PSI

109

PSI72

PSI

217

PS

I

100°F

120°F

140°F

155°F

170°F

45 P

SI

117

PSI

100°F

120°F

140°F

155°F

170°F

Continuous 24/24h

10

150

20

309

30

462

40

618

50

771

60

927

70

1083

80

1236

90

1392

100

1809

110

1701

130

2010

140

2163

120

1854

2

3

ALH 40

1.5

Pump speed (RPM)

Flow (GPM)

Intermittent* Occasional*

Tem

per

atur

e (°

F)

Installed power (HP)

Continuous 24/24h

10

99

20

198

30

298

40

396

50

497

60

594

70

695

80

792

90

893

100

990

110

1091

130

1289

140

1386

120

1188

2

3

ALH 32

1.5

Pump speed (RPM)

Flow (GPM)

Intermittent* Occasional*

Tem

per

atur

e (°

F)

Installed power (HP)

Continuous 24/24h

10

52.8

20

105

30

158

40

211

50

264

60

332

70

370

80

422

90

475

100

528

110

581

130

687

140

739

120

634

2

3

ALH 25

1.5

Pump speed (RPM)

Flow (GPM)

Intermittent* Occasional*

Tem

per

atur

e (°

F)

Installed power (HP)

Continuous 24/24h

10

17.2

20

45

30

67.4

40

89

50

112

60

132

70

157

80

177

90

202

100

224

110

247

120

256

0.5

0.75

ALH 20

0.33

Pump speed (RPM)

Flow (GPH)

Intermittent* Occasional*

Tem

per

atur

e (°

F)

Installed power (HP)

Continuous 24/24h

10

13.2

20

26.4

30

39.6

40

52.8

50

66

60

79.2

70

92.4

80

105

90

118.9

100

132

110

145.3

120

159

0.5

0.75

ALH 15

0.33

Intermittent* Occasional*

Tem

per

atur

e (°

F)

Installed power (HP)

10

4

20

8

30

11.9

40

15.9

50

19.8

60

23.8

70

27.7

80

31.7

90

35.7

100

39.6

110

43.6

120

47.5

0.5

0.75

ALH 10

0.33

Pump speed (RPM)

Flow (GPH)

Tem

per

atur

e (°

F)

Continuous 24/24h Intermittent* Occasional*

Installed power (HP)

Continuous 24/24h

10

2.6

20

5.2

30

7.9

40

10.5

50

13.2

60

15.8

70

18.5

0.5

0.75

ALH 10 (3 lobes)

0.33

Pump speed (RPM)

Flow (GPH)

Intermittent* Occasional*

Tem

per

atur

e (°

F)

Installed power (HP)

Continuous 24/24h

10

0.9

20

1.8

30

2.7

40

3.6

50

4.5

60

5.4

0.25

0.33

ALH 05 (3 lobes)

0.16

Pump speed (RPM)

Flow (GPH)

Intermittent* Occasional*

Tem

per

atur

e (°

F)

Installed power (HP)

The ALBIN Pump AHL-P in-line pulsation dampener will reduce vibration and water hammer in your piping therefore increasing the hose life.

EXPERIENCED INNOVATORSKEEP IT SIMPLE ALH

OPTIONS

Twin head pump, several pump bodies inline driven by the same gear motor

Special connections such as NPT, ANSI, Tri-Clamped, and QD

Pump rollers for pump without lubricant Leak detector and revolution counter ATEX I & II certification

This is done by using a pump without valves, pistons, stators or rotating elements in the fluid. The ALH series is designed to make hose changes quick and easy with no technical knowledge required.

ALBIN ALH HOSE CONSTRUCTION

We only work with high quality compounded rubbers, reinforced with 2 to 6 individual layers of braided polyamide and with an outer layer made to strict tolerances to ensure perfect compression. The characteristics of ALBIN hoses enable them to last approximately 30% longer than other hoses on the market. They also fit the majority of other hose pumps.

ALBIN PUMP HOSE

For the hose inner layers, 6 materials are available to suit the diversity of the pumped fluids :

• NR > Natural rubber (white marking)

• NBR > Buna (yellow marking)

• NBR Food* approved FDA >Buna (white & yellow marking)

• EPDM (red marking)

• HYPALON* (blue marking)

• VITON/FKM* (purple marking)

*Any other hoses material requirements available on request

THE ALH PUMP is very easy to use and maintain. This addresses what we at ALBIN PUMP see as two of the key customer issues : the need to lower costs and the need to reduce downtime.

TYPICAL APPLICATIONS

WATER TREATMENT - lime slurry, ferrous chloride, activated carbon, reagent feed, coagulant, floculate dispersion, alum, sludge and foams. MINERAL PROCESSING - sludge with viscosity up to 60,000 CPS, clay slurry, particle size: 1.125'', lead sulfate,pyrite, SABX, cyanide, various acids. CERAMIC - barbotine, mold filling, filter press feeding. Building fibrous mortar, plaster, light concrete, cement flooring.

CHEMICAL INDUSTRY - various acids, PVDF latex, alcohol, soap, non aromatic solvents. FOOD INDUSTRY - tomato sauce, mashed potatoes, gelatin, beer yeast, olive oil, wine. Paint, water based paint, acrylics, pigments, ink, wall coating. PAPER MILLS - latex, kaolin, paper waste sludge, various chemical dosing. AGRICULTURE - manure, fertilizer, sugar mills, molasses, liquid sugar and various chemicals.

TECHNICAL SPECIFICATIONSALH

DIMENSIONS

ALH 05 - 20

ALH 25 - 40

ALHX 40 - 125

TYPE A B C D E F G H I J K L M N O P Q

ALH 05 4" 4.5 9" 3.75" 10" 8.625" 9.5" 1.375" 10.25" 11" 4XØ9M X 1.812" 1.375" 5/8"* 2.25" 3.2"

ALH 10 4" 4.5 9" 3.75" 10" 8.625" 9.5" 1.375" 10.25" 11" 4XØ9M X 1.812" 1.375" 5/8"* 2.25" 3.2"

ALH 15 2.875" 7.6" 11.65" 5.7" 12.687" 9.875" 11" 2" 11.8" 13" 4XØ13M X 1.92" 1.4" 7/8"* 2.7" 4.9"

ALH 20 2.875" 7.6" 11.65" 5.7" 12.687" 9.875" 11" 2" 11.8" 13" 4XØ13M X 1.92" 1.4" 1"* 2.7" 4.9"

ALH 25 3.75" 10.3" 14" 7.5" 16.387" 12.25" 13.82" 4.33" 22" 23.625" 4XØ13M X 2.56" 2.75" 1" FLG 2.4" 4.33"

ALH 32 4.82" 13" 17.14" 9.375" 20.687" 16.75" 18.25" 6.2" 30.31" 31.89" 4XØ13M X 3.25" 3.5" 1.25" FLG 4.3" 6.2"

ALH 40 4.82" 13" 17.14" 9.375" 20.687" 16.75" 18.25" 6.2" 30.31" 31.89" 4XØ13M X 3.25" 3.5" 1.5" FLG 4.3" 6.2"

ALHX 40 4.33" 17" 15.75" 11.5" 24.25" 13.38" 16.5" 6.7" 33.5" 37.4" 4XØ19M X 3" 3.38" 1.5" FLG 3.42" 6.7"

ALH 50 6.5" 21.8" 20.38" 14.17" 31.5" 20.2" 23.35" 7.35" 37.4" 41.33" 4XØ19M X 3.75" 4" 2" FLG 6" 10"

ALH 65 6.5" 21.8" 20.38" 14.17" 31.5" 20.2" 23.35" 7.35" 37.4" 41.33" 4XØ19M X 3.75" 4" 2.5" FLG 6" 10"

ALHX 80 6" 29.37" 23.75" 18.625" 39.5" 22.83" 26.75" 11.4" 45.25" 49.25" 4XØ19M X 5" 4.85" 3" FLG 4.6" 11.4"

ALH 80 10.3" 34.5" 31.6" 21.875" 52" 27.16" 32.67" 13.5" 51.18" 55.125" 4XØ27M X 5.5" 5.6" 3" FLG 8.25" 13.6"

ALH 100 11.8" 41" 35" 27" 66.1" 32.25" 37.8" 16.1" 74.8" 78.75" 4XØ27M X 5.87" 6.87" 4" FLG 11.6" 16.1"

ALH 125 13.37" 50.1" 40.87" 30.9" 68.9" 39.37" 44.9" 19.7" 74.8" 78.75" 4XØ27M X 11.8" 9.1" 5" FLG 26" 19.7"

ALL DIMENSIONS AND TECHNICAL DATA IS SUBJECT TO CHANGE WITHOUT NOTICE

L

IJ

M

O

P

4 x K

N

AB

HH

D

Q Q

F

G

C

E

L

M N

O

4 x K

PIJ

D C

ABE

HH

Q Q

FG

M N

L

O

4 x K

P IJ

Q QD C

F

G

HH

E

AB

TYPE 10 RPM 20 RPM 40 RPM 60 RPM 80 RPM 100 RPM 120 RPM 140 RPM

ALH 05 (3 lobes) 0.9 1.8 3.6 5.4

ALH10 (3 lobes) 2.6 5.2 10.5 15.8

ALH 10 4 8 15.9 23.8 31.7 39.6 47.5

ALH 15 13.2 26.4 52.8 79.2 105 132 159

ALH 20 17.2 45 89 132 177 224 256

ALH 25 52.8 105 211 332 422 528 634 739

ALH 32 99 198 396 594 792 990 1188 1386

ALH 40 150 309 618 927 1236 1809 1854 2163

ALHX 40 211 422 845 1268 1690 2113

ALH 50 462 924 1849 2773 3698 NA

ALH 65 607 1215 2430 3645 4860 NA

TYPE 10 RPM 20 RPM 30 RPM 35 RPM 40 RPM 45 RPM 50 RPM

ALHX 80 24.2 48.4 72.6 84.7 96.9 109 121

ALH 80 30.8 61.6 92.4 107.9 123.2 139 154

ALH 100 52.8 105.7 158.5 185 211 238

ALH 125 96.8 193.7 291 339 388

TECHNICAL SPECIFICATIONS ALHFLOW TABLE (GPH)

FLOW TABLE (GPM)

ALBIN ALHS SERIESFor customers who require a long coupled pump, ALBIN PUMP has also developed the ALHS series. These pumps are equipped with a removable bearing case for easy bearing maintenance and can be converted into a close coupled ALH type pump at any time.

HOW TO USE THE PUMP CURVES

1 - Select the required flow. This gives you the required pump speed.2 - Move upwards to the calculated discharge pressure.3 - Move to the left for the installed motor power.4 - Determine the fluid’s max. temperature.5 - Move to the left to the calculated discharge pressure.6 - Move downwards to determine your maximum allowed pump speed for the fluids temperature.

Continuous use (GPH)

Intermittent use(GPH)

Occasional use (GPH)< 1 hour/day

FLOW CURVE - ALBIN ALH PUMP

Tem

per

atur

e (º

F)

Intermittent Service*

117

PSI

45 P

SI

0 PSI

Continuous Service24/24h

P InstalledMotor (HP)

0.75

0.5

0.33

Pump Speed (RPM)

Flow (GPH)

10

3.96

20

7.92

30

11.8

40

15.8

50

19.8

60

23.7

70

27.7

80

31.7

90

35.6

100

39.6

110

40.9

120

47.5

1 6

2

54

3

100°F

120°F

140°F

155°F

170°F