air systems web catalogue
TRANSCRIPT
Breathing AirProducts Catalog
Breathing AirProducts Catalog
Breather BoxTM.........................................1-2 Airline Monitors CO and O2..................7Auto-AirTM Breather BoxTM.........................3 Remote Air Manifolds.............................8Auto-AirTM Carts..........................................4 Breathing Air Accessories.......................9Custom Filtration.........................................5 Air Quality Testing................................10Breathing Air Panels - Fixed......................6
Breathing Air Compressor Systems......11-12 Ambient Air Pumps...............................15Plant Air Compressor Systems..................12 Special Application Air Pumps........16-17Portable Breathing Air Compressors....13-14 The COOL-BOXTM
(Respirator Cooling)..........17
CCOOMMPPRREESSSSOORRSS1111--1177
FFIILLTTRRAATTIIOONN11--1100
The Ergo-Air® Cart.....................................18 Confined Space Entry Cart....................22MULTI-PAKTM Air Cart-Small..................19 Breathing Air Assemblies......................23MULTI-PAKTM Air Cart-Large..................20 Bottled Air Accessories.........................24Speciality Bottled Air “PAKS”.................21 Custom Cylinder Storage Racks...........24AIR -WAGONTM - 6 Cylinder Air Cart....22
BBOOTTTTLLEEDD AAIIRR CCAARRTTSS1188--2244
TECH-RESCUETM Cart............................25 Custom Air Trailers and Systems..........30DRAG-BAGTM..........................................26 Bauer Fill Compressors..........................31MACKTM Air Distribution Units..........27-28 Containment Fill Stations......................32RESCUE-PAKTM........................................28 AIR-KADDYTM SCBA Racks................32AIR-RESPONDERTM Trailers...................29 SpitfireTM PPV blowers..........................33
FFIIRREE//RREESSCCUUEEEEMMEERRGGEENNCCYY SSEERRVVIICCEESS
2255--3333
Venturi Air Horns and Fans......................41VVEENNTTIILLAATTIIOONN4411
Portable Fume Extractor...........................42 Hospital HEPA Vacuum........................44HEPA VACUUMS - Electric...............43-44 Vacuum Accessories..............................44HEPA VACUUMS - Pneumatic................43 Disposable HEPA Vacuum Canisters....45Back-Pack Vacuums..................................44 Body Cooling Air Supplied Vests.........46
ENVIRONMENTALCONTROL
42-46
Warranty/Return Information.................47Breathing Air Questionnaire..................48
TA B L E O F C O N T E N T S
®
These portable Grade-D filtration systems are designed to provide breathing air for a specific number of workers. The system filters inlet airto provide respirator users with Grade-D qualityair and monitors for CO and/or Oxygen.
The first stage element filters bulk water and par-ticulate and has an auto drain. The secondstage coalescing filter eliminates atomized oils,mists, ultra-fine particulates, and has an autodrain. The third stage filter removes organicvapors and odors and has a manual drain. Filterchange indicators are standard on all threestages of filtration. Filtration efficiency is 99.99%@ .01 micron. All Breather BoxesTM are designedto be used in the upright and closed position.
The standard carbon monoxide airline monitoroperates on disposable 9-volt batteries, 12-voltDC line voltage, or 115 VAC for continuous airmonitoring. An external alarm and light signalsthe workers of high CO content.
Point-of-Attachment (POA) boxes can extend respirator usage beyond300 feet. See page 8 for additional details.
1
BB50-CO
BB30-CO
BB15-CO
All portable and fixed breathing air filtration systems meetor exceed U.S. and Canadian breathing air standards.
T H E B R E AT H E R B OXFF II
LL TTRR AA
TT IIOO NN
REMOTE ALARMSARE AVAILABLE FOR PORTABLE AND
FIXED APPLICATIONS*SEE PAGE 9 FOR ORDERING
INFORMATION
APPROVED INTRINSICALLY SAFE BREATHER BOXTM MODELS AVAILABLE
All models can be outfitted with an approved intrinsically safemonitor (DC power only). Pneumatic remote CO alarms are
available. Consult Customer Service. NOTE: INTRINSICALLY SAFE (IS) VERSIONS ARE CSA
APPROVED FOR CLASS I, DIVISION 1, GROUPS C ANDD ENVIRONMENTS.
UNITS ARE “DC” (9-VOLT) OPERATION ONLY
THE INDUSTRY’S STANDARD IN HIGH PERFORMANCE PORTABLE GRADE-D BREATHING AIR F ILTRATION SYSTEMS
Brea ther Box TM Order ing In format ionPlease specify 1/4” Hansen or Schrader fittings when ordering. Other fittings available for an
additional charge. See page 9 for coupling selection guide.
STANDARD PORTABLE BREATHER BOXTM
BB15-CO* Standard Breather BoxTM - 15 cfm - 1 couplingBB15-CO2* Standard Breather BoxTM - 15 cfm - 2 couplingsBB30-CO Standard Breather BoxTM - 30 cfm - 2 couplingsBB30-CO3 Standard Breather BoxTM - 30 cfm - 3 couplingsBB50-CO Standard Breather BoxTM - 50 cfm - 4 couplingsBB75-CO Standard Breather BoxTM - 75 cfm - 6 couplingsBB100-CO Standard Breather BoxTM - 100 cfm - 4 couplings BB100-CO6 Standard Breather BoxTM - 100 cfm - 6 couplings BB100-CO8 Standard Breather BoxTM - 100 cfm - 8 couplingsBB150-CO Breather Box™ - 150 cfm - supplied with 3 each 1/2˝ sockets, no regulator,
ORDER POA-4 BOXES AND HOSES SEPARATELY, see page 8.CARBON MONOXIDE & OXYGEN MONITORING VERSIONSBB50-C002 Standard Breather BoxTM - 50 cfm - 4 couplings, CO and Oxygen monitoringBB100-C002 Standard Breather Box™ - 100 cfm - 4 couplings, CO and Oxygen monitoringINDEPENDENT REGULATOR VERSIONSBB50-CO4R Standard Breather BoxTM - 50 cfm - 4 couplings, 4 independent regulators and pressure gaugesBB100-CO4R Standard Breather BoxTM - 100 cfm - 4 couplings, 4 independent regulators and pressure gaugesINTRINSICALLY SAFE VERSIONSBB30-COIS Intrinsically Safe Breather BoxTM - 30 cfm - 2 couplingsBB50-COIS Intrinsically Safe Breather BoxTM - 50 cfm - 4 couplingsBB100-COIS Intrinsically Safe Breather BoxTM - 100 cfm - 4 couplings (Optional 6 or 8 couplings)
ALL BREATHER BOXTM MODELS AVAILABLE WITH “IS” VERSION MONITORSCALIBRATION KITSBBK-20 Calibration kit for CO monitor-20 ppm CO, zero air, regulator and case – 17 liter size disposable cylindersBBK-10 Calibration kit – same as above with 10ppm CO gas for International calibration
See catalog page 9 for larger calibration kits and accessories
DON’T FORGET TOORDER YOUR COCALIBRATION &
REPLACEMENT FILTERKITS!
S P E C I F I C A T I O N S• 1ST STAGE FILTER
w/ Filter Change IndicatorRemoves Bulk Water and Particulate
• 2ND STAGE FILTERw/ Filter Change Indicator
Oil Coalescing and Ultra-fineParticulate Filtration
• 3RD STAGE FILTERw/ Filter Change Indicator
Charcoal Removes Organic Vapors andObjectionable Odors
• Automatic Drains in 1st and 2nd Stage FilterAssemblies
• 2-year Warranty on Sensor and Monitor• In-Line Carbon Monoxide (CO) Monitor with
optional C0/02 Monitor & Intrinsically SafeModels
• Electro-chemical Sensor for Specific GasDetection and Rapid Calibration
• Dual 9-Volt Battery Operation, 8-16 VDCand/or 115 Volt AC
• Filter Change Indicator provided on all 3 filters except BB15-CO Series*
• Safety Relief Valve set at 125 psi• Solid Aluminum Block Manifold
• 0-160psi Pressure Gauge• Visual Flowmeter to Verify Air Flow to
Monitor• External Case Mounted CO Warning Lights
and Audible Alarm• Remote DC Alarm Jack with Cover Cap
except BB15-CO Series* • Maximum Inlet Pressure - 150psi
REMOTE CO ALARMS
T M
BB100-CO8
2
The Blast-Air™ Cart has been designed for thesandblast/paint industry and industrial plantsthat need advanced, high-capacity air filtration.
The Blast-Air™ 50 pictured is our standard 50cfm Breather Box™ mounted on a BA-1Cpre-filter cart. Air can be supplied to the cart
from mobile or plant air compressors andpre-filtered through high capacity water, oil,and particulate separators located on therear of the rugged steel cart. These ruggedpre-filters automatically drain large amounts
of oil and water from mobile compressorsbefore it enters the Breather Box™. This process will extend the filter life of the Breather Box™ and reduce maintenance downtime and costs. Any of our portable Breather Box™
models can be fitted to our BA-1C Blast-Air™ Cart.
C a r t D i m e n s i o n s : 4 0 ” H x 2 0 ” W
Blas t -Ai r TM Car t Order ing In format ionPlease specify 1/4” Hansen or Schrader fittings when ordering.Other fittings available for an additional charge. See page 9
for coupling selection guide.BA-30 30 cfm Breather BoxTM installed on the Blast-AirTM CartBA-50 50 cfm Breather BoxTM installed on the Blast-AirTM CartBA-100 100 cfm Breather BoxTM installed on the Blast-AirTM CartBA-1C Blast-AirTM cart only with rear filters and connect hose
Rear View
T H E B L A S T- A I R C A RTDESIGNED FOR COMMERCIAL SANDBLASTERS AND PAINTERS
“IDEAL FOR USE BY SANDBLASTERS AND PAINTERSTO SAVE FILTERS AND REDUCE
EQUIPMENT DAMAGE”
The DUAL-AIR™ CART has been designed for the customer whoneeds both emergency short duration bottled air and continuousduty Grade-D plant air filtration all in one cart. The DUAL-AIR™ Cartprovides for both applications on one cart and allows the user toconvert his existing Air Systems’ Breather Box™ equipment for useon the DUAL-AIR™ series cart. This new system saves the customertime and money and provides a level of emergency response notavailable in the past.
The DUAL-AIR™ cart is ordered complete with a built-in high pres-sure (5000 psi) regulator, 2 high pressure (CGA-347) connectwhips with hand tight nuts, and one low pressure connect hosefrom the regulator. The connect hose attaches to the Breather Box™
when cylinder air is required. The cylinder air passes through thefilter system and is distributed to the respirators through theBreather Box™ manifold and regulator system. A rear collapsiblehose rack, pneumatic 10” tires, bottle straps, and front storage boxare supplied standard on the DUAL-AIR™ Cart system.
Contact our Customer Service department for assistance whenretrofitting your existing Breather Box™ as special mounting hard-ware may be required on the DUAL-AIR™ Cart.
Dual-Ai r TM Car t Order ing In format ionPlease specify 1/4” Hansen or Schrader fittings when ordering. Other fittings available
for an additional charge. See page 9 for coupling selection guide.DAC-30 DUAL -AIRTM Cart with BB30-CO Breather BoxTM, cylinders not includedDAC-50 DUAL -AIRTM Cart with BB50-CO Breather BoxTM, cylinders not includedDAC-100 DUAL -AIRTM Cart with BB100-CO Breather BoxTM, cylinders not included
Rear hoserack
Lowpressure
connect hoseto Breather
BoxTM
Optional air
cylinders
10˝pneumatic
tires
Recessed5000psi
high pressureregulator
Frontstorage box
Powdercoated black
steelframe
®
Cart Dimensions: 23˝L x 23˝W x 46˝H
BreatherBoxTM
D UA L - A I R C A RT S Y S T E MCYLINDER AIR AND PLANT AIR ALL IN ONE CART
FFIILLTTRRAATTIIOONNT M
T M
3
REMOTE ALARMS, HOSES, AND OTHER FILTRATION ACCESSORIESARE AVAILABLE ON PAGE 9
Primary Air Line
Reserve Air Line
115 VACinput forstandardmodels
• Requires 115 VAC for operation, optional pneumatic version available
• DC remote audible and visual alarms available as an option
• Pneumatic alarms on intrinsically safe version • 1ST STAGE FILTER w/ filter change indicator
bulk water and particulate removal• 2ND STAGE FILTER w/ filter change indicator
oil coalescing and ultra-fine particulate removal
• 3RD STAGE FILTER w/ filter change indicatororganic vapor and odor removal
• Automatic drains in 1st and 2nd Stage• Safety relief valve set at 125psi
• Solid aluminum block manifold• 0-160psi pressure gauge• Visual flow meter to verify air flow to
carbon monoxide monitor• External case mounted warning lights
and audible alarm• In-line carbon monoxide monitor, optional
CO/O2 monitor• 2 year warranty on CO sensor and
monitor, (1 year Oxygen sensor warranty)• Optional Intrinsically safe CSA approved
airline monitor available for hazardous locations
• Electro-chemical sensor for specific gas detection and rapid calibration
BB50-COAASTANDARD ELECTRIC VERSION
MODEL BB100COAAPFULLY PNEUMATIC VERSION
WITH INTRINSICALLY SAFE CO MONITOR
S P E C I F I C A T I O N S
The primary air lineconnection isattached from thecompressor. Areserve air line isattached from areserve bank of aircylinders based onthe required egressduration. The systemcan be tested prior toeach use to ensureproper function of theAuto-AirTM system.
AU TO - A I R B R E AT H E R B OXFULLY AUTOMATIC RESERVE AIR SYSTEM FOR WORK IN HAZARDOUS ENVIRONMENTS
W H A T I S A N A U T O - A I R ™ S Y S T E M ?The Auto-AirTM filtration system was developed to provide Grade-D breathingair with automatic reserve air in the event of either electrical failure orreduced pressure from the main air source while working in IDLH or haz-ardous environments. In the event of a pressure or electrical failure, the Auto-AirTM system automatically switches to the reserve air cylinder(s). Local andoptional remote alarms signal the workers that the primary air system hasfailed and switched to the back-up air system.
NIOSH requires the use of a 5 minute airline escape respirator when workingin IDLH environments. Our Auto-AirTM feature does not replace the NIOSHrequirement, however, some work environments may require a 30-minute (orlonger) airline escape method to safely egress the hazardous area. This situa-tion would require the use of an Auto-AirTM Breather BoxTM or Cart. (See page4 for Auto-AirTM Cart information).
Auto-Ai r TM Brea ther Box TM Order ing In format ionPlease specify 1/4” Hansen or Schrader fittings when ordering. Other fittingsavailable for an additional charge. See page 9 for coupling selection guide.
STANDARD ELECTRIC VERSIONS BB30-COAA Auto-AirTM Breather BoxTM - 30 cfm - 2 couplingsBB50-COAA Auto-AirTM Breather BoxTM - 50 cfm - 4 couplingsBB100-COAA Auto-AirTM Breather BoxTM - 100 cfm - 4 couplings
INTRINSICALLY SAFE VERSIONSBB50-COAAP Intrinsically Safe Auto-AirTM Breather BoxTM - 50 cfm - 4 couplingsBB100COAAP Intrinsically Safe Auto-AirTM Breather BoxTM - 100 cfm - 4 couplings
OPTIONAL RESERVE AIR CYLINDERSAC-60 60cf aluminum cylinder - 2400psi rated - 30 minuteAC-87 87cf carbon fiber cylinder - 4500psi rated - 1 hour
CALIBRATION KITSBBK-20 Calibration kit for CO monitor-20 ppm CO, zero air, regulator and case – 17 liter
size disposable cylindersBBK-10 Calibration kit – same as above with 10ppm CO gas for International calibration
DON’T FORGET TO ORDER YOUR COCALIBRATION & REPLACEMENT FILTER KITS!
SEE CATALOG PAGE 9 FOR DETAILS
size the reserve air system to achieve the required egress time!
T M
FF IILL TT
RR AATT II
OO NNT M
4
AUTO-AIR™ CARTSTANDARD ELECTRIC
VERSION
MODEL B10023HTAP
INTRINSICALLY SAFE VERSIONComplete Pneumatic Operation
NOTE: INTRINSICALLY SAFE (IS) MONITORS ARE CSAAPPROVED FOR CLASS I, DIVISION 1, GROUPS C AND D
ENVIRONMENTS. UNITS ARE “DC” (9-VOLT) OPERATION ONLY
APPLICATIONS• Refineries• Chemical and Pharmaceutical manufacturing• Refueling applications• Tank cleaning
System mounted on 2300series cylinder cart
ALL BB30 THRU BB100 SERIES STANDARD CARTS HOLD TWO 87 OR 60 CF AIR CYLINDERS.OPTIONAL LARGE CYLINDER CARTS ARE
AVAILABLE FOR LONG DURATION APPLICATIONS. CONSULT CUSTOMER SERVICE.
FFIILLTTRRAATTIIOONN
BB50-HTAA
The custom Auto-Air™ Cart, pictured at left, is designedfor use with our standardErgo-Air® Cart frame. Thisunit holds two 444 cf aircylinders and provides easeof mobility for use in plantair operations. Any sizeBreather Box™ can be addedto the Ergo-Air® Cart frame.
CONSULT CUSTOMERSERVICE TO DESIGN ACART TO MEET YOUR
PARTICULAR APPLICATION
APPLICATIONS
• Confined space entry• Hazardous material handling• Boiler cleaning operations• Nuclear work areas• Fuel cell maintenance• Asbestos removal• Tank entry and cleaning• Grain silo entry
All lights andremote alarmsare pneumaticallyoperated andspark free. COmonitor isapproved andoperates on 9-volt DC batteries only.
OrderCylinders
Separately
The Auto-Air™ Cart provides a system approach to breathing air filtration. One cart contains both a full Grade-D filtration unit and either a pneumatic or electric reserve air system. Choose a cart size based on the desiredamount of reserve air to allow workers to safely egress the work area. The pneumatic version should beselected for hazardous and potentially explosive environments.
AU TO - A I R C A RT SFULLY AUTOMATIC RESERVE AIR SYSTEM FOR WORK IN HAZARDOUS ENVIRONMENTS
Auto-Ai r TM Car t Order ing In format ionPlease specify 1/4” Hansen or Schrader fittings when ordering.
Other fittings available for an additional charge. See page 9 forcoupling selection guide.
STANDARD ELECTRIC VERSIONS BB50-HTAA Auto-AirTM Cart - 50 cfm - requires 115 VAC for operation
4 couplingsBB100-HTAA Auto-AirTM Cart - 100 cfm -requires 115 VAC for operation
4 couplingsBB100-23AA Auto-AirTM Cart - 100 cfm -requires 115 VAC for operation, system
supplied on large cylinder cart - 4 couplingsINTRINSICALLY SAFE VERSIONSBB50-HTAAP Intrinsically Safe Auto-AirTM Cart - 50 cfm - 4 couplingsBB100HTAAP Intrinsically Safe Auto-AirTM Cart - 100 cfm - 4 couplingsBB100-23AA Auto-AirTM Cart - 100 cfm -requires 115 VAC for operation, system
supplied on large cylinder cart - 4 couplings
CALIBRATION KITSBBK-20 Calibration kit for CO monitor-20 ppm CO, zero air, regulator and
case – 17 liter size disposable cylindersBBK-10 Calibration kit – same as above with 10ppm CO gas for
International calibration
System Requires 115 VAC forOperation
T M
5
H AV E A S P E C I A L A P P L I C AT I O N ?Air Systems provides a full service
engineering department to design a custom Breather BoxTM or a total plantbreathing air system to meet the most
demanding air requirements.
Consult our customer service department to help with the
specifications and design to meet yourspecific breathing air application.
800.866.8100
CLEAR VIEWING WINDOWScan be installed for rapidverification of inlet andoutlet pressures duringcritical work operations.
INDEPENDENT REGULATORSallow different respiratorsand lengths of hoses tobe used simultaneously.
TOTAL PLANT AIR SYSTEMS
EXPLOSION-PROOF FILTRATIONSYSTEMS
NEMA-7 enclosure
FULLY AUTOMATIC RESERVEAIR SYSTEM
with Carbon Monoxideand Oxygen Monitoring
C U S TO M F I LT R AT I O N D E S I G N SGRADE-D F ILTRATION & REMOTE AIR MANIFOLDS
FF IILL TT
RR AATT II
OO NN
6
FFIILLTTRRAATTIIOONN
F I X E D B R E AT H I N G A I R PA N E L S
S I N G L E U S E R G R A D E - D A I R P A N E L• Ideal for single user breathing air stations• Small and compact, ready for wall mounting• 115 VAC and/or 9-volt DC operation for CO monitor
(supplied with power cord)• Indicator lights and standard audible alarm (90 dbA)
mounted on CO monitor• Flow rate 17 cfm• Auto drains in 1st and 2nd stage filters (no filter change
indicators)• Dimensions: 15” W x 15”H
These fixed Grade-D filtration systems are designed to provide breathing airfor a specific number of workers. The system filters inlet air to provide respi-rator users with Grade-D quality air. The first stage element filters bulk waterand particulate, the second stage coalescing filter removes atomized oils andultra-fine particulate, and the third stage removes organic vapors and odors.Filter change indicators are standard on all three filtration stages. Filtrationefficiency is 99.99% @ .01 microns. A built-in carbon monoxide monitor oper-ates on 9-volt DC and/or 115 VAC for continuous detection. A high intensityaudible alarm and light signals the workers of high CO content in theirbreathing air. A 115 VAC electrical conduit box is provided as standard.
GRADE-D F ILTRATION FOR PERMANENT MOUNTING APPLICATIONS
S P E C I F I C A T I O N S• Standard panel mounted versions supply 30, 50, 75, 100, and 150 cfm, at 125
psi outlet pressure• Grade-D air is monitored for carbon monoxide (CO) and an optional version for
simultaneous monitoring of CO and Oxygen (O2) is available• High intensity audible alarm (123dbA) is standard. Warning lights are supplied
on all panels for airline monitoring• Monitor operates on 115 VAC or 8-16 VDC, conduit box supplied for 115 VAC
and remote alarm connection• Intrinsically safe 9 VDC is available as an option• Supplied with inlet coupling or NPT for permanent installations• Automatic drains supplied as standard in stage 1 and 2 filters• Filter change indicators on all filters• Panel Dimensions: 23”W x 22” H for all standard models
BB50-COPM
BB30-COPM
BB15-COPM
A U T O - A I R ™ O P T I O N
If IDLH conditions exist , order a filtra-tion panel with the Auto-Air™ optioninstalled. This version automatically
switches to a reserve bank of aircylinders to maintain
full system air pressure to the workers if main compressor air is
lost. Consult factory when orderingthis option, 1-800-866-8100.
Custom Panel Sizes are Available up to 3000cfm Capacity
Fixed Brea th ing Ai r Pane l Order ing In format ionPlease specify 1/4” Hansen or Schrader fittings when ordering. Other fittings available
for an additional charge. See page 9 for coupling selection guide.
STANDARD PANELS - CO MONITORINGBB15-COPM Single user Grade-D breathing air panel with CO monitor - 15 cfm - 1 couplingBB30-COPM Standard Grade-D breathing air panel with CO monitor - 30 cfm - 2 couplingsBB50-COPM Standard Grade-D breathing air panel with CO monitor - 50 cfm - 4 couplingsBB75-COPM Standard Grade-D breathing air panel with CO monitor - 75 cfm - 6 couplings or NPT outletBB100-COPM Standard Grade-D breathing air panel with CO monitor - 100 cfm - 4 couplings or NPT outletBB150-COPM Standard Grade-D breathing air panel with CO monitor - 150 cfm - NPT outletBB250-COPM Standard Grade-D breathing air panel with CO monitor - 250 cfm - NPT outletBB650-COPM Standard Grade-D breathing air panel with CO monitor - 650 cfm - NPT outlet CARBON MONOXIDE & OXYGEN MONITORING PANELSBB50-C02PM Grade-D breathing air panel with CO/O2 monitor - 50 cfm - 4 couplingsBB100C02PM Grade-D breathing air panel with CO/O2 monitor - 100 cfm - 4/6 couplings or NPT outletAUTO-AIR™ PANEL MODELSBB50C0AAPM Auto-Air Grade-D breathing air panel with CO monitor - 50 cfm - 4 couplingsOther models available, consult factory.INTRINSICALLY SAFE MODELS - (Option available on all panels)BB15COPMIS Grade-D breathing air panel with intrinsically safe CO monitor - 15 cfm - 1 couplingBB30COPMIS Grade-D breathing air panel with intrinsically safe CO monitor - 30 cfm - 2 couplingsBB50COPMIS Grade-D breathing air panel with intrinsically safe CO monitor - 50 cfm - 4 couplings
CALIBRATION KITSBBK-20 Calibration kit for CO monitor-20 ppm CO, zero air, regulator and case – 17 liter size dispos-
able cylindersBBK-10 Calibration kit – same as above with 10ppm CO gas for International calibration
NOTE: INTRINSICALLY SAFE (IS) VERSIONS ARE CSA APPROVED FOR CLASS I, DIVISION 1, GROUPS C AND D ENVIRONMENTS. MONITORS ARE “DC” (9-VOLT) OPERATION ONLY
EXPLOSION-PROOF FILTRATION SYSTEM
• Explosion-proof NEMA 7enclosure for CO moni-tor and electronics
• Viewing window• External test buttons• Steel panel mounted
Grade-D filtration• 50 to 3000 cfm filtration
capacities• Custom options available
• High intensity pneumatic audible alarm withadjustable volume
• Explosion-proof visual strobe• Metal strobe guard• MSHA cable – order separately• Air alarm hose – order separately• Steel panel mounted frame assembly
EXPLOSION-PROOF REMOTE DUAL ALARM
B50-COPMEX
50-EXALPST
7
PANEL MOUNTED CO MONITOR
FIXED SYSTEM FOR CONTINUOUS SAMPLING OF CO AND/OR O2 LEVELS
• Dimensions: 7.0˝L x 2.75˝H x 5.1˝W• Weight: 2 lbs.• Monitor display: LCD 3-digit readout• Temperature range: 4 to 113 degrees F (-20 to 45 degrees C)• Monitor range: 0-200 ppm CO; optional 15-23% oxygen (O2)• Pressure range: 1-3 psi, flow 50-100cc• Accuracy: ± 1% of full scale• Response: 90% of full scale in 10 seconds• Sensor type: 3-electrode electrochemical• Humidity range: 10% to 90% relative humidity• Intrinsically safe versions available. Approved for use in Class I,
Division 1, Groups C and D environments. Available in CO or CO/O2versions, 9-volt DC only
This durable carbon monoxide (CO) airline monitor panelcan be ordered to retrofit any existing Grade-D breathingair system. It can be ordered with dual monitoring of COand Oxygen (O2). A approved monitor is also availablewith 9-volt DC operation only for intrinsically safe applica-tions. Units supplied with high intensity audible alarmand 115 VAC power cord. All units are powder coatedsteel and are ready for wall or panel mounting.
C ARBON MONOXIDE MONITORMODEL CO-91
DU AL OXYGEN AND C ARBONMONOXIDE MONITOR
MODEL CO2-91
• Warranty: 2 years on entire unit and CO sensor, 1 year on oxygen sensor• Alarm setting: 10 ppm CO (5 ppm International)• Voltage operation: 115 VAC, dual 9-volt DC battery, or 8-16 -volt DC• Test circuitry: manual push-to-test for sensor operation and alarms• Shielding: internal RFI/EMI • Warning indicators: low battery (amber), normal operation (green), high CO
level (red) - indicators vary with model ordered• Output signals: standard DC output on portable, AC output on panel versions• Aluminum case housing with black anodized finish• Control panel standard features: inlet gas quick connect coupling, auxiliary bat-
tery jack, on/off/test switch, auxiliary/remote alarm jack, 115 VAC jack. • Intrinsically safe versions have no AC power output jack
C A R B O N M O N O X I D E M O N I T O R S P E C I F I C A T I O N S
PORTABLE CARBON MONOXIDE AIRLINE MONITOR
FOR INTERMITTENT OR CONTINUOUS SAMPLING
This portable monitor unit connects easily to any high or low pressure com-pressed breathing air source and monitors the air for CO content. Theaudible alarm (90 dbA) will activate when the CO level exceeds 10ppm(5ppm International). External alarm and lights allow for the unit to beused in the closed position.
S P E C I F I C A T I O N S• Operates on 9-volt batteries and/or 115 VAC• 1/4˝ Hansen coupling supplied on 5ft. hose• Standard alarm jack allows for connection to remote alarm devices• Optional high intensity alarm available• Available in approved Intrinsically safe version - 9 VDC only
MODEL CO-91PM
APPROVED INT RINSIC ALLY SAFE MONITOR
MODEL CO-91IS
FF IILL TT
RR AATT II
OO NN A I R L I N E M O N I TO R SCARBON MONOXIDE & OXYGEN - FULL 2 YEAR SYSTEM & CO SENSOR WARRANTY
Por tab le CO Moni tor Order ing In format ionCO91-14LAC Portable CO monitor, 9 VDC and/or 115 VAC, 5ft. hose, 150 psi
maximum inlet pressureCO91-14HAC Portable CO monitor, 9 VDC and/or 115 VAC, 5ft. hose, rated for 5000
psi maximum pressure, includes 5000psi regulator and 5ft. hoseCO91-LACG Portable CO monitor with built-in calibration gas cylinders, 150 psi
maximum, includes regulatorCO91-HACG Portable CO monitor with built-in calibration gas cylinders, rated for
5000 psi maximum pressure, includes calibration gas and regulator
Pane l MountedMoni tor Order ing In format ion
CO-91PM Panel mounted CO monitor, 9 VDC and/or 115 VAC, audiblealarm, visual lights, flowmeter, quick connect calibration fit ting,LCD display
CO-91ISPM Panel mounted intrinsically safe CO monitor, 9 VDC only,approved for Class I, Division 1, Groups C and D environments,audible alarm, visual lights, flowmeter, quick connect calibrationfit ting, LCD display
CO2-91PM Panel mounted carbon monoxide (CO) and oxygen (O2) monitor,simultaneously monitors for high CO and low O2 levels in breathingair with independent digital readout, audible alarm, visual lights,flowmeter, quick connect calibration fit ting, LCD display
MODEL
CO91-14LAC
8
PORTABLE PRE-FILTER• Designed for use with compressors
that discharge a large volume of oiland water
• High capacity 240 cfm filtration - 200psi rated with metal bowl
• Automatic drain assembly• Use after compressor and before
Grade-D filtration unit (Breather BoxTM)• Galvanized steel frame with carry
handle• Supplied with 1/2˝ Chicago fitting on
inlet, 1/2˝ industrial interchange socketon outlet
PORTABLE AIRCOOLING
MANIFOLD
See COOL-BOX™Detailed
SpecificationsOn Page 17
1/2˝Chicagoinlet fitting
Air Flow
1/2˝IndustrialInterchangeoutlet fitting
“ RESPIRATOR COOLING SYSTEM”“ RESPIRATOR COOLING SYSTEM”
The Point-Of-Attachment (POA) series provides remote manifold capability forrespirator users, while complying with NIOSH regulations. The POA seriesconsists of a regulator, pressure gauge, safety relief valve, and fitting congru-ency necessary for proper respirator operation. The POA box can be locatedany distance from the Grade-D filtration Breather-BoxTM or filtration panel. Theremote air manifold (POA) assembly is now limited to a maximum 300 feet ofbreathing air hose at the air outlet fitting.
Custom designs are available for 1 - 8 workers. Contactour customer service department for details.
• Meets NIOSH requirements for point-of-attachment
• Adjustable regulator• 1/2˝ male Hansen plug incoming (indus-
trial interchange)• Pressure gauge (0-160 psi)• Safety relief valve - set at 125 psi• 4 respirator couplings - 1/4˝ • Aluminum block manifold• Unbreakable water resistant
polycarbonate case• Rubber gasketed lid helps to prevent
internal contamination• Designed for wall mounting, includes
brackets• Available from 1-8 outlets -
specify fittings• Meets NIOSH requirements for
point-of-attachment• Adjustable regulator• Pressure gauge (0-160 psi)• Safety relief valve - set at
125 psi• Aluminum block manifold• Replace “X” in part number for the
required number of fittings
Four independent regulators allow eachworker to adjust their desired pressuredepending on the brand (style) of respiratorand length of hose. Custom options areavailable, contact customer service fordetails.
FFIILLTTRRAATTIIOONN
Model PF-240
POA-4 OPEN POSITION
POA-XWM
POA-4R
M O D E L B AC B - 19 6
POA-4 MANIFOLD
Air Systems can customize a POA box tomeet the most demanding needs.Available Options:
• Clear viewing window• Multiple filters and regulators• Stainless steel or aluminum cases• Low pressure warning alarms
POA MANIFOLDWITH 4 INDEPENDENT
REGULATORS
CUSTOM POA UNITS
COOL–BOX™
WALL MOUNTED POA MANIFOLD
POA-5RF
R E M OT E A I R M A N I F O L D SPOINT OF ATTACHMENT SERIES
POA Order ing In format ionPlease specify 1/4” Hansen or Schrader fittings when ordering.Other fittings available for an additional charge. See page 9
for coupling selection guide.POA-4 Standard POA Box - 4 couplingsPOA-4R POA Box with 4 independent regulatorsPOA-4F POA Box with final particulate filterPOA-4RF POA Box with final particulate filter and 4
independent regulatorsBBM-4LF “NRC” POA Box, final particulate filter, 4 independent regulators, low
pressure warning alarm and lights (a clear gauge viewing window isoptional)
POA-“X”WM Wall mounted POA manifold, replace “X” in part number for therequired number of fittings
QUICK-CONNECT COUPLINGS*
•Hansen • Schrader • Parker • Snap-Tite • National • Perfecting • CEJN • Chicago* Specify size and type when ordering breathing air systems and hoses
CEJN Plug
CEJN Coupling
Hansen Plug
Hansen Coupling Schrader Coupling
Snap-Tite PlugSchrader Plug Hansen S.S. HK PlugChicago Coupling
Chicago Coupling Snap-Tite Coupling Hansen S.S. HK Coupling
Colors may varydepending on reel type
ordered.
FF IILL TT
RR AATT II
OO NN
HR-100M
HR-50
HR-500MCHose Reel Cart
3/8”, 1/2”, 3/4” ID in stock
Specify desired coupling, fitting size,and hose length when ordering - see
price list for ordering information
BREATHING AIR HOSE
DC Operation
AC Operation Cable not supplied
Wall mount alarm
Strobe
Horn
AIRLINE MONITOR CALIBRATION KITS
BREATHING AIR HOSE REELSAll reels can be supplied with hose installed. Hose reels can be mounted on roller carts. Consult factory for details.
Note: Breathing air hose must be ordered separately.
These alarm units have been designed to duplicate local alarms found on the primary equipment such as the Breather BoxTM to signalworkers in a remote location that there is an alarm condition with their system. They act as a valuable early-warning device for theisolated worker and allows him to make a safe egress from a hazardous work environment. Portable Breather BoxTM unitsrequire DC alarms. Wall mount filter panels require AC alarms. Consult factory to select the proper alarm.
ALMSTH12050-ALMST
BBK-20 BBK-20103
When ordering hosereels for use with
NIOSH approved hose,order HR-50POA or
contact CustomerService.
9
B R E AT H I N G A I R AC C E S S O R I E S
Hose Ree l Order ing In format ionAUTOMATIC REWIND HOSE REELS - 3/8” HOSE (150 PSI MAX)HR-50 Automatic hose reel holds 50’ of 3/8” ID breathing air hose with automatic retracting and multi-position installationHR-50SS Stainless steel automatic hose reel – holds up to 50’of 3/8” ID breathing air hose with automatic retracting and multi-
position installationHR-50POA NIOSH point of attachment automatic hose reel holds 50’ of 3/8” ID breathing air hose with installed regulator,
pressure gauge, and safety relief valve - use with NIOSH approved respirator hose
AUTOMATIC REWIND HOSE REELS -1/2” HOSE (150 PSI MAX)HR-505 Holds up to 50’ of 1/2” ID breathing air hose with auto retracting and multi-position installationHR-575 Holds up to 75’ of 1/2” ID breathing air hose with auto retracting and multi-position installation
MANUAL HOSE REELS (150 PSI MAX)HR-100M Manual hose reel holds 100’ of 3/8” ID hose or 50’ of 1/2” ID breathing air hoseHR-400M Manual hose reel holds 400’ of 3/8” ID hose or 200’ of 1/2” ID breathing air hoseHR-550M Manual hose reel holds 550’ of 3/8” ID hose or 300’ of 1/2” ID breathing air hose HR-500MC Manual hose reel cart with fold down handle and holds 400’ of 3/8” or 300’ of 1/2” ID breathing air hoseHIGH PRESSURE HOSE REELS (5000 PSI MAX)HPR-350 Auto hose reel holds 50’ of 1/4” ID high pressure air hoseHPR-300M Manual hose reel holds 300’ of 1/4” ID high pressure air hose
Alarm Order ing In format ionFOR STANDARD BREATHER BOXTM MODELS50-ALM Remote audible alarm with 50 ft. cable, 9-12 VDC50-ALMST Remote audible alarm with mounted visual strobe and guard - 50 ft.
cable, 9-12 VDC50-ALMSTH Remote high intensity audible alarm with mounted visual strobe and guard
- 50 ft. cable, 9-12 VDCFOR PANEL MOUNTED FILTRATION MODELSEXAL Explosion-proof audible alarm – no cable, 120 VACEXVST Explosion-proof visual strobe alarm – no cable, 120 VACALMSTH120 Remote audible/visual strobe w/ conduit box no cable - 120 VAC
Cal ibra t ion Order ing In format ionBBK-20 Calibration kit for CO monitor-20 ppm CO, zero air, regulator and case – 17 liter
size disposable cylindersBBK-10 Calibration kit – same as above with 10ppm CO gas for International calibrationLARGE CALIBRATION KITSBBK-20103 Large calibration kit includes 1 cylinder 20 ppm CO, 1 cylinder zero air,
regulator, pressure gauge, tubing, and hard case – 103 liter size disposable cylinders
CALL REPAIR SERVICES FOR REPLACEMENT GAS CYLINDERS AND PARTS
3/8” ID
1/2” ID
REMOTE ALARMS
Certified laboratory air testing is now available for high pressure bottled air or lowpressure compressor air requirements. Take your own samples in 10 minutes andsend out for precise laboratory results. A 2LA accredited lab will test to any recog-nized standards, e.g., CGA, NFPA, or Federal MIL Specs. Results can be obtained inless than 3 days; same day service is available for an additional charge.
10
Plugs directly into outlet fitting on Breather Box™ or filtration panel - specify fitting
AIRFLOW
AIR FLOW
CGA-346 (3000psi)or
CGA-347 (5000psi)
LP-A4ATTACHES
HERE100 PSI MAXIMUM
PRESSURE
Air Systems’ breathing air quality test kits are designed to test the airproduced by compressors (Model LP-A4) and compressed air incylinders (Model HP-A4 and HP-A445). These tests are accom-plished through the use of lowcost detector tubes that providea “go/no go” test of the air qual-ity. If a high reading is found,this signals the user that theyhave a potentially unacceptablequality of breathing air. If thisoccurs, a laboratory analysis ofthe air components must bemade to determine the exactreadings of the air quality andtake corrective action. For precise laboratory analysis,see Air Check Kit information below.
COMPLETE TEST KITLP/HP-A4K
HIGH PRESSURE CYLINDERAIR TEST MODULE
ELECTRONIC CO/O2 CYLINDER AIR TEST METER
The Model AQT-O2 Air Quality Test Meter has been devel-oped out of a need to test rented cylinder blended air qualitybefore putting them to use. Obtain an immediate and accurateoxygen (O2) reading for both high pressure cylinder air and lowpressure plant air lines. The tester can be ordered with an additional sensor to read carbon monoxide (CO) simultane-ously with oxygen (O2), order Model AQT-COO2. The testerrequires two 9-volt batteries for operation and is supplied with 5feet of hose. For cylinder air testing, order the optional high pres-sure adapter pictured at below, Part No. AQT-347LP.
DESIGNED FORLOW PRESSURE AIRTESTINGThe Air Quality Test Meteris supplied with low pres-sure air hose and a male1/4” Hansen 3000 seriesplug for direct attachmentto any low pressure (under120 psi) Grade-D airsource. Specify desired fit-ting when ordering.
ACK-97 & AQT-1LS
“Test Air Quality Prior to Use”
AQT-347LPAIR CYLINDER
ADAPTER
HIGH PRESSUREAIR CYLINDER ADAPTER
When testing bottled air cylinders,the AQT-347LP adapter must beordered. It reduces cylinder pres-sures up to 5000 psi down to 100psi. The AQT’s sample hose canthen be plugged directly into theair cylinder adapter.
Model AQT-COO2 attached to
BB30-CO BreatherBox TM
FFIILLTTRRAATTIIOONN
A I R QUA L I T Y T E S T I N G
LOW PRESSURE COMPRESSORAIR QUALITY TEST MODULE
LP-A4 HP-A445 & HP-A4
Air Qua l i t y Order ing In format ionBASIC COMPONENTS FOR ALL TESTSHP-1A* Replacement carbon monoxide test tube - 10/BoxHP-2A* Replacement carbon dioxide test tube - 10/BoxHP-6A* Replacement water vapor test tube - 10/BoxHP-109AD* Replacement oil mist test tube - 10/Box* Denotes Tubes Supplied In Kits BelowFOR OXYGEN TESTING - SEE AQT AT RIGHT
BASIC COMPONENT TEST MODULESHP-A4 Cylinder air test module – 3000 psi maximum
– use with test module LP-A4HP-A445 Cylinder air test module – 5000 psi maximum
– use with test module LP-A4LP-47PF Total particulate test module – maximum 20 psi
– add to test modules above – includes one filterLP-A4 Compressor air quality test module – 100 psi max.
COMPLETE TEST KITSLP/HP-A4K Consists of: LP-A4, HP-A4, LP-47PF, 4 boxes assorted
test tubes, polycarbonate padded carry case – 3000 psi maximumLPHPA445K Same as above kit, includes HP-A445 test module in place of HP-
A4 module – 5000 psi maximum Air Qua l i t y Order ing In format ionAQT-O2 Air Quality Test Meter, oxygen (O2) only, max. pressure
125 psiAQT -COO2 Air Quality Test Meter, CO and O2, max. pressure 125 psiAQT -347LP High pressure air cylinder adapter, 5000 psi max.BBK-20 Calibration kitNote: All meters are supplied with 5 feet of test hose and a 1/4”
Hansen or Schrader low pressure plug. For cylinder air testing,order high pressure cylinder adapter above.
LABORATORY AIR TESTING SERVICEFAST * EASY * ACCURATE
AIR SAMPLING KITS AVAILABLE FORRENTAL OR PURCHASE
Air Check K i t Order ing In format ionACK-97 Air Check Kit to extract air sample. Specify pressure adapter (see price list)
Purchase of AQT -1LS requiredACK-97R RENTAL Air Check Kit., 2 weeks. Purchase of AQT -1LS requiredAQT -1LS Laboratory analysis fee and sample media kit. One kit required for each air test
performed.
Plant breathing air systems are designed to provideGrade-D breathing air for industrial applications. Remoteair manifolds would be needed at various work stations.The system pictured at right includes our 135 cfm com-pressor, a 200 gallon ASME receiver tank, Air Systems’Grade-D filtration panel with our CO-91series carbon monoxide monitor and arefrigerated air dryer. The entire filtrationsystem is mounted on a steel forkliftframe assembly. This package configu-ration can be designed for anyrequired flow(cfm) capacities and out-put pressures. SEE CATALOG PAGE48 FOR OUR PLANT BREATHINGAIR DESIGN QUESTIONNAIRE.
Model acfm Output Electric Motor Sizes L x W x H inchesNumber @ 110 psi Horsepower Weight in lbs. - Skid Mount
BAC-HP20 21 5 21 x Horsepower x 251243#BAC-HP30 30 7.5 23 x 23 x 31 1370#BAC-HP40 42 10 23 x 23 x 31 1 370#BAC-HP70 68 15 40 30 x 29 x 39 1 585#BAC-HP90 92 20 30 x 29 x 39 1 585#BAC-HP115 115 25 52 x 26 x 36 1 950#BAC-HP135 135 30 52 x 26 x 36 1010#BAC-HP170 170 40 63 x 40 x 52 1520#BAC-HP195 195 40 63 x 40 x 52 1520#BAC-HP240 240 50 63 x 40 x 52 1940#BAC-HP280 282 60 71 x 44 x 56 2490#BAC-HP360 360 75 71 x 44 x 56 2600#
Breathing Air Compressors Available up to 3000 cfm
ELEMENTS OF A TYPE-C BREATHING AIR SYSTEM
Air Systems’ technical staff will assist you in selecting the proper compressor as the first step in designing a breathing air system. The compressor styles and specifications listed below are for general information. Once a specific compressor is selected, detailed information
such as technical specifications and Auto-Cad® drawings will be provided for Customer Review.
Compressor
Compressed Air Source,Receiver Tank,
Optional Air Dryer
Respirator(s)
Maximum 300 Feet ofNIOSH Approved Breathing
Air Hose
FiltrationSystem
Oil, Water, Particulate,Organic Vapor Removal,
CO Monitor, Alarms
Air DistributionSystem
Manifold, Relief Valve,Regulator, Gauge,
Hose Couplings
Breathing AirCompressor PackageLayout and design may vary
depending on custom options.
Consult factory for specific compressor
package weights and dimensions
All systems are designed and engineered to be ready for immediate use. Plumbing and electrical service is all that is required to be prepared prior to delivery.
CCOO MM
PP RREE SS
SS OORR SS
11
Refrigerated AirDryer
200 GallonReceiver
135cfm BreathingAir Panel
Electric Drive Compressorwith Digital Control Panel
MODEL BAC-HP135Skid-mounted Grade-D Breathing Air Package
Typical Breathing Air PackagesDual Air Tower Compressors with
Auto Sequencing
B R E AT H I N G A I R C O M P R E S S O R SELECTRIC, GASOLINE, & DIESEL ROTARY SCREW
BACHP68-2
Compressor AftercoolerDryer
Alternate Location
Before Receiver Tank
Dryer
Normal Location
After Receiver Tank
Oil Removal Filter
12
TYPICAL SYSTEM LAYOUT OPTIONS
Oil RemovalCoalescing Filter
Water
Separator
Receiver Tank
COMPLETE GRADE-D BREATHING AIR PACKAGES READYFOR PLANT INSTALLATION,
(HORIZONTAL DESIGN PICTURED)
COMPRESSOR ACCESSORIES
CCOOMM
PPRREESSSSOO
RRSS
“Select the industry’s finest compressors”
GRADE-D CUSTOMBREATHING AIR
SYSTEMSSelect from the new line of
vertical “Air Tower” compres-
sor/refrigerated dryer
systems at left or select our
standard horizontal designed
Grade-D breathing air
packages.
A
S
M
E
“Air Tower”Grade-D Compressor
System
P L A N T A I R C O M P R E S S O R S Y S T E M SINDUSTRIAL ELECTRIC MODELS
• Standard and HEPARemote Intake AirFilters available
• Refrigerated Air Dryer• Desiccant Air Dryer• Receiver Tanks• Air or Water Cooled
Aftercoolers• Automatic Moisture
Separators• Skid Mounting• Sequencers• Field Training available
Specifications are subject to change without notice.
13
The Twin-Air™ Compressor system is designed to provide Grade-D breathing air to 3 workers wearing pressure demand respirators. The TA-3has twin ASME receiver tanks that act as the mounting frame for the compressor. The use of the receiver tanks provides air that has beencooled to within 10 degrees of the ambient temperature. We’ve added pneumatic tires for ease of mobility in rough terrain and a bottom skidplate for going up and down stairs. This plate becomes the frame for the addition of a reserve air cylinder on the model TA-3EA. Any 30 or 60minute air cylinder can be installed on the TA-3 frame. With the addition of a pressure reducing regulator and an Auto-Air™ Breather Box™, younow have a 3-worker compressor with fully automatic backup air for IDLH applications. This compressor is not designed for use withconstant flow respirators. For additional air cooling, choose Air Systems’ Cool-BoxTM; see catalog page 17 for details.
TA - 3 S E R I E S C O M P R E S S O R S P E C I F I C AT I O N S• Rotary vane air compressor rated for continuous duty • Pressure range to 110 psi output• 2 HP electric motor,1750 rpm – continuous duty – thermally protected• 115/230 VAC 1-phase, 60Hz,17.2 amps (Requires 20 amp service)• Optional explosion-proof motor (230/3 VAC only)• Dimensions: 46˝L x 24˝W x 22˝H - Weight: 150 lbs • Low maintenance - 500 hours between oil changes• 10˝ pneumatic tires• 50,000 hour minimum vane life• Built-in skid plate for stair climbing• USDA approved food grade oil in compression end• Automatic pressure unloading – full modulation air control• Breather Box™ Grade-D filtration package required• Optional 60 or 87 cubic foot reserve air cylinder mounts on cart with ASI regulator• TA-3EA requires 115 VAC operation for the Auto-Air™ Breather Box™• Noise level below 70 dbA at 3 feet• 8 Gallon Twin-Air tank assembly (8.5 cf air storage @ 110psi)• 1/2˝ 5000 series Hansen coupling on air outlet• Twin-Air™ tanks are ASME coded receiver tanks
COMP-3™
Breathing Air Compressor Sys tem
ForBreather Box™
Specifications,See Catalog
Page 1
Note:
Vortex Cooling
Tubes Cannot
Be Used On
This System
• • •
Use Pressure
Demand
Respirators Only
Twin-AIRTank Design!!
Low CostPortability
CCOO MM
PPRR EE
SS SSOO
RR SS
TA -3 COMPRESSOR
H-10-5 HOSE
BB30-CO3BREATHER BOX TM
THE AUTO-AIR™ COMPRESSOR SYSTEM PACKAGEis designed to provide automatic back-up air for up to 3 workers in the event ofcompressor failure. The package consists of the Auto-Air™ Breather Box™ modelBB30-COAA, the TA-3EA compressor supplied with a CGA-347 high pressurereducing regulator, primary and secondary hoses. Optional 60 or 87cf cylindercan be installed on the compressor frame. System is designed for pressure demand respirators only.
COMP-3EA™ SYSTEMfor use in Hazardous
Environments
P O RTA B L E B R E AT H I N G A I R C O M P R E S S O R SFOR USE WITH PRESSURE DEMAND RESPIRATORS ONLY
TA -3EA COMPRESSOR
BB30-CO A A A UTO-AIR TM
BREATHER BOX TM
Twin-Ai r ™ Order ing In format ionTA-3 Twin-Air™ Compressor, complete, 115/230 VAC, 1 phase
Order Breather Box™ and hose separatelyTA-3EA Twin-Air™ Compressor System: Includes TA-3 with the addition
of an adjustable high pressure (5000psi) regulator for attach-ment to a CGA-346/7 cylinder, bottle strap, and cylinder pro-tection molding. Note: Grade-D filtration and hoses ordered separately or available in packages below
COMP-3 Package system includes: Model TA-3 compressor, H-10-5(1/2˝x10´) hose, and BB30-CO3 Breather Box™ filtration package with 3 respirator fittings
COMP-3EA Package system includes: Model TA-3EA compressor, H-10-5(1/2˝x10´) hose, H-10-3(3/8˝x10´) hose, regulator,and BB30-COAA Breather Box™ (order reserve air cylinderseparately).
AC-60 60 cf aluminum cylinder - 2400psi rated - 30 minuteAC-87 87 cf carbon fiber cylinder - 4500psi rated - 1 hour
NOTE: SIZE THE RESERVE AIR SYSTEM TO ACHIEVE THE REQUIRED EGRESS TIME
™
14
S P E C I F I C A T I O N S• 110psi output air pressure• Explosion-proof electric motor - 230 VAC, 3 phase• Explosion-proof on/off switch• 25ft. power cord, no plug (user supplied)• 3-worker operation - pressure demand respirators only• Full automatic back-up air feature - 4500 psi capability• Pneumatic indicator and audible alarm for system failure• Grade-D 3-stage filtration • Intrinsically safe carbon monoxide monitor, approved. 9-volt
DC operation for Class 1, DIV. 1, Groups C and D environments• Twin-Air™ tank design for cool breathing air output, ASME coded• Holds one, 87cf, 4500psi air cylinder used for reserve egress air• Steel air control panel• Pneumatic 10” tires
The TA-1 compressor has been designed tooperate 1 constant flow hood style respiratorand a vortex cooling tube or 2 pressuredemand airline respirators. Grade-D filtrationmust be provided in the form of a 1 or 2 manBreather BoxTM. The TA-1 uses a 115/230 VAC60Hz electrical supply and is available with anoptional gasoline engine for mobile operations.
TA-1 COMPRESSORDESIGNED FOR 1 CONSTANT FLOW
OR 2 PRESSURE DEMAND AIRLINE RESPIRATORS
TA-1COMPRESSOR
(Non--Coded Twin Air Tanks) H-25-3CONNECT HOSE
BB15-COBREATHER BOXTM
CCOOMM
PPRREESSSSOO
RRSS
TA3-AXAF
P O RTA B L E B R E AT H I N G A I R C O M P R E S S O R SSPECIAL APPLICATION DESIGNS
Order ing In format ionTA-1 Electric compressor 1-2 worker, 115 VAC.
Grade-D filtration must be ordered separately.
TA-3G Gasoline compressor, 3 worker with remote intake snorkel. Grade-D filtration must be ordered separately.
COMP-1 Grade-D compressor package includes: 1 ea. TA-1 compressor, 1 ea. BB15-CO Breather BoxTM, and 1 ea. H-25-3 connect hose
COMP-2 Same as COMP-1 with the addition of Model BB15-CO2, 2-outlet Breather BoxTM
TA3-AXAF Order ing In format ionTA3-AXAF Explosion-proof compressor includes: Grade-D filtration, air control
panel with CO monitor, 25ft. power cord, no plug. Reserve air cylin-ders sold separately. NOTE: SIZE THE RESERVE AIR SYSTEM TOACHIEVE THE REQUIRED EGRESS TIME
ACCESSORIES
AC-60 60 cf aluminum cylinder - 2400psi rated - 30 minuteAC-87 87 cf carbon fiber cylinder - 4500psi rated - 1 hourBBK-20 CO monitor calibration kit
E X P L O S I O N - P RO O F AU TO - A I R C O M P R E S S O RFOR USE IN IDLH AND HAZARDOUS ENVIRONMENTS
T M
15
S P E C I F I C A T I O N S• Maximum pressure 10 psi at 9 cfm
output, 9.5 cfm output at 4 psi• Electric motor: 3/4 HP, ODP, 100-
115/208-230 VAC, 12.2/6.1 amps,50/60 Hz, 1 phase, thermally protect-ed, CSA approved
• 0.5-0.7 micron inlet and compressorfilters
• 0-30 psi pressure gauge• Prewired with on/off switch and plug
(115 VAC plug only)• Approximate weight: 55 lbs.
S P E C I F I C A T I O N S• Maximum pressure 15 psi at 12 cfm output,
15 cfm output at 4 psi• Electric motor: 1 1/2 HP, TEFC, 115/208-
230 VAC, 15.2/8.2 amps, 60 Hz, 1 phase,thermally protected, CSA approved
• Optional explosion-proof electric motor avail-able – Model BAC-17EXP 230/460 (3phase). Explosion-proof on/off switchordered separately
• 0.5-0.7 micron inlet and compressor filters• 0-30 psi pressure gauge• Prewired with on/off switch and plug (115
VAC plug only)• Approximate weight: 96 lbs.
S P E C I F I C A T I O N S• Maximum pressure 15 psi at 16 cfm
output, 20 cfm output at 4 psi• Electric motor: 2 HP, TEFC, 115/208-
230 VAC, 20.0/10.0 amps, 60 Hz, 1phase, thermally protected, CSA approved
• 0.5-0.7 micron inlet and compressor filters
• 0-30 psi pressure gauge• Prewired with on/off switch and plug
(115 VAC plug only)• Approximate weight: 103 lbs.
OPTIONAL CO MONITORINGSee Page 7 for Details on Model CO91-14LAC
OPTIONAL RESPIRATOR COOLINGSee Page 17 for Details on Model BACB-196LP
CCOO MM
PPRR EE
SS SSOO
RR SS
ALL AIR PUMPS COME STANDARD WITH 1/4” HANSEN OR SCHRADER FITTINGSOPTIONAL FITTINGS ARE AVAILABLE AT AN ADDITIONAL CHARGE, CONSULT CUSTOMER SERVICE.
BAC-102-WORKER AIR PUMP
BAC-173-WORKER AIR PUMP
BAC-204-WORKER AIR PUMP
P O RTA B L E B R E AT H I N G A I R P U M PC O M P R E S S O R S LOW PRESSURE AIR PUMPS FOR USE WITH CONSTANT FLOW RESPIRATORS ONLY
A L L A I R P U M P S C A N B E O R D E R E D W I T H :
Ambient Ai r Pump Order ing In format ionPlease specify 1/4” Hansen or Schrader fittings when ordering. Other fittings available for an additional charge.
See page 9 for coupling selection guide.
BAC-10 2-worker ambient air pumpBAC-17 3-worker ambient air pumpBAC-17EXP 3-worker explosion-proof ambient air pump BAC-20 4-worker ambient air pumpBAC-20P 4-worker pneumatic ambient air pumpREPLACEMENT FILTERSNote: All ambient air pumps require two (2) replacement filters, the pump compressor filter and the air intake filter.
BAC-393 Replacement pump compressor filter for all models (Box of 10)BAC-10F Replacement air intake filter - Model BAC-10 (Box of 27)BAC-20F Replacement air intake filter - Models BAC-17, BAC-20, BAC-20P (Box of 14)BAC-20HF-1* Replacement HEPA (99%) air intake filter for Models BAC-17, BAC-20 and BAC-20PACCESSORIESCO91-14LAC Portable CO monitor designed for ambient air pumpsBACB-196LP COOL-BOXTM designed for low pressure air pumps
Note: BAC-17 and BAC-20 models are now available with an optional HEPA intake filter*
16
S P E C I F I C A T I O N S• Maximum compressor pressure 15 psi at 16 cfm output, 20 cfm
output at 4 psi• 0.5-0.7 micron inlet and compressor filter • Optional HEPA intake filter available on page 15• 0-30 psi output pressure gauge• Approximate weight (w/o frame): 150 lbs.• Available with optional CO monitor• Order replacement filters on page 15
CCOOMM
PPRREESSSSOO
RRSS
Air Systems offers two large, high volume, oilless compressors that deliver amaximum 15 psi. These pumps operate only constant flow respirators. Due tohigh output air temperatures, a small receiver tank or a COOL-BOX™ is recom-mended to provide cool air to the workers. A six outlet manifold or straight pipeoutlet is supplied standard.
BAC-30RT30Optional CO Monitor available
P O RTA B L E C O O L - A I R C O M P R E S S O R SAll air pumps deliver output air temperatures rang-ing between 140-180oF. The low cost solution tocool the pump’s air is to order Air Systems’ air pumpmounted on the ASME Twin-Air™ tank/cart frameassembly. Output air temperatures will be approxi-mately 20o above the ambient temperature. Thesystem has large tires for ease of mobility and stor-age. Each tank is supplied with a manual moisturedrain valve. A COOL-BOX™ can be ordered for addi-tional cooling.
COOL-AIR TM PUMP DESIGNED FOR USE WITH CONSTANT FLOW RESPIRATORS ONLY
BAC-203TCO
Twin-Air™ tanks cool pump output air to approximately 20o above ambient temperature
Optional CO monitor available
Twin Ai r Tank Order ing In format ionNote: All ambient air pumps are supplied with either 1/4˝ Hansen or Schrader cou-
plings and dust caps. Other style fittings supplied at an additional charge PUMPS WITHOUT CO MONITORINGBAC-10-3T BAC-10 compressor pump on TA-3T, Twin-Air™ tank assemblyBAC-17-3T BAC-17 compressor pump on TA-3T, Twin-Air™ tank assemblyBAC-20-3T BAC-20 compressor pump on TA-3T, Twin-Air™ tank assemblyBAC-20P-3T BAC-20P compressor pump on TA-3T, Twin-Air™ tank assembly PUMPS WITH CO MONITORINGBAC-103TCO BAC-10 compressor pump on TA-3T, Twin-Air™ tank assembly
with CO monitorBAC-173TCO BAC-17 compressor pump on TA-3T, Twin-Air™ tank assembly
with CO monitorBAC-203TCO BAC-20 compressor pump on TA-3T, Twin-Air™ tank assembly
with CO monitor
H I G H VO LU M E P U M P C O M P R E S S O R SAMBIENT AIR COMPRESSORS FOR USE WITH CONSTANT FLOW RESPIRATORS ONLY
High Volume Pump Order ing In format ionNote: All ambient air pumps are supplied with either 1/4˝ Hansen or Schrader cou-
plings and dust caps. Other style fittings supplied at an additional charge
BAC-30 Compressor with 3 HP motor, 230/460, 50/60Hz,3-phase, 34 cfm @ 0 psi, 32 cfm @ 5 psi, 26 cfm @15psi, no receiver tank supplied
BAC-30RT30 BAC-30 compressor 3 HP motor, 230/460, 50/60Hz,3-phase, mounted on 30 gallon receiver tank, 6-out-let manifold supplied or straight pipe
BAC-55 Compressor with 5 HP motor, 230/460-60-3, 56 cfm @0 psi, 52 cfm @ 5 psi, 48 cfm @ 15 psi. no receivertank supplied
BAC-55RT30 BAC-55 compressor mounted on 30 gallon receivertank, 6-outlet manifold supplied or straight pipe
T M
17
B E N E F I T S• Provides low cost cool breathing
air anywhere• Operates with any airline Type-C
mask or hood style respirator• Ideal for cooling Level “A” chemi-
cal suits and air supplied hoods• Provides cool air for up to four
workers• Attaches easily to any
Grade-D air source up to 150 psi• Eliminates the need and
expense of noisy vortex coolingtubes
• Designed and engineered for lessthan 2 psi pressure drop in thesystem with flow capacities to 75cfm
• Provides NIOSH point-of-attach-ment components and cooling inone package
• CUSTOM MOUNTING OPTIONSAVAILABLE, CONSULT FACTORY
“SIMPLE LOW -COST PORTABLE COOLING”
COOL-BOX™ attached to Grade-DBreather-Box™
“JUST ADD ICE FOR IMMEDIATE
RESPIRATOR AIRCOOLING”
CCOO MM
PPRR EE
SS SSOO
RR SS
BACB-196LP
The low pressure Cool-BoxTM, BACB-196LP, isdesigned to attach to any ambient air pump
(conversion kit supplied)
BACB-196
COOL-BOX™ mounted oncart with BAC-20 air
pump and two 100ft.hose reels. Delivers 9cfmper respirator at 12psi.
Consult factory fordetails and custom
options. Order ModelBAC20CB2HR
Output temperatures may varydepending on ambient conditions,
the type of respirator used,and length of hose
Model BACB-196K
Conversion Kit
F E A T U R E S• Provides approximately 50°F output air
temperature with input temperatures upto 180°F
• Requires only 20 lbs. of ice for operation,and provides 4 to 8 hours of cooling
• Manual condensate drain installed inside• Attaches to any Grade-D compressed air
source up to 150 psi• Adjustable pressure regulator, gauge,
and safety relief valve installed in the sys-tem with a final filter
• Entire unit is packaged in a rugged Igloo®
roller cooler with a fold down pull handle
COOL–BOXPORTABLE COOLING AIR DISTRIBUTION MANIFOLD
Compressor and HosesSold Separately
COOL-BOX™ Order ing In format ionBACB-196 COOL-BOX™ complete with 1/4˝ Hansen or Schrader fittings – rated to 150 psi inlet pressure
BACB-196LP COOL-BOX™ designed specifically for use with Ambient Air Pumps (0-20 psi max.), Low pressure pump BACB-196K conversion kit included
BACB-196K COOL-BOX™ Conversion Kit for any air pump brand to operate with the COOL-BOX™ ModelBACB-196LP (supplied with COOL-BOX™ Model BACB -196LP)
BAC20CB2HR COOL-BOX™ mounted on cart with BAC-20 air pump and two 100ft. hose reels
BAC-20AIR PUMP
T M
ERGO-AIR® CART SYSTEMAir Systems’ innovative bottled air cart has beenergonomically designed to help prevent back injuriesand facilitate mobility. The Ergo-Air® Cart featuresone-hand operation during raising or lowering ofthe air control panel and cylinders.
No back strain is placed on the operator duringpushing or pulling the cart. The basic cart designcomes standard with Air Systems’ unique air controlpanel and cart assembly. Several hose reel optionsare available to meet particular job applications.
S P E C I F I C A T I O N S• 2400 or 4500 psi rated air pressure
regulator - specify•Dual 9-volt electronic low pressure audible and visualalarms are supplied on the electronic versions only
•Low pressure alarm whistle is standard on the pneu-matic version - optional bell alarm is available
•Remote audible and visual alarm jack – electronicversions only
•Steel air control panel with 4-outlet respirator manifold
•16˝ semi-pneumatic rear tires and front locking swivelcasters - standard
•High pressure hardware with in-line check valves•Twin cylinder straps with padded brackets•Cart lifting hooks installed as standard feature•Optional steel upper storage cabinet – 24˝ W x 12˝ H x 12˝ D
Above cart shown with Optional StorageCabinet, Cylinders, Hose, and 450 ft. Manual
Reel InstalledCUSTOM VARIATIONS AVAILABLE
CONSULT SALES DEPARTMENT
Ergo-Air® isthe RegisteredTrademark ofAir Systems
International, Inc.
Tilted transport position
Cylinders, hose,and reel ordered
separately
VERTICAL OPERATING POSITION
Recessedair control
panel
Optional upper
storagecabinet
Optional pneumatic tiresare available,16˝ rear and
10˝ front
Consult factory for pricing
TWIN AUTO HOSE REELSCAN BE INSTALLED AS AN
OPTION
Air controlpanel
Optionalupper
storagecabinet
Raising cart: 15 lbs. of forceLowering cart: 35 lbs. of force
BBOOTTTTLLEEDD AAIIRR CCAA
RRTTSS
“ H e l p s R e d u c e B a c k I n j u r i e s ”
“ T h e F i r s t E r g o n o m i c a l l y D e s i g n e d M o b i l e B r e a t h i n g A i r C a r t S y s t e m ”
Lift hooks
D i m e n s i o n s :32˝W x 41̋ D x 62˝H
D i m e n s i o n s :39̋ W x 41̋ D x 62̋ H
18
E RG O - A I R C A RT SERGONOMICALLY DESIGNED CYLINDER AIR CARTS
Ergo-Ai r ® Car t Order ing In format ionPlease specify 1/4” Hansen or Schrader fittings when ordering. Other fittingsavailable for an additional charge. See page 9 for coupling selection guide.
EAC-97NB ERGO-AIR® cart, 2400 psi regulator, no reel or cylinders, LP whistle alarmEAC-97HNB ERGO-AIR® cart, 4500 psi regulator, no reel or cylinders, LP whistle alarmEAC-97ENB ERGO-AIR® cart, 2400 psi regulator, no reel or cylinders, electronic alarmEAC-97HENB ERGO-AIR® cart, 4500 psi regulator, no reel or cylinders, electronic alarmCART OPTIONS EAC-97150A Single HR-50. auto hose reel - holds 50 ft. 3/8˝ hoseEAC-97250A Dual 50ft. auto hose reels installedEAC-97300M 300ft. manual hose reel – holds 200 ft. 1/2˝ or 300 ft. 3/8˝ hoseEAC-97210M Dual 100ft. manual hose reels installed – holds 100 ft. 3/8˝ hoseEAC-97450M Manual hose reel - holds 450ft. of 3/8˝ hose or 300ft. of 1/2˝ ID hoseH-300-5 Breathing air hose 1/2˝ ID - 300 ft.H-300-3 Breathing air hose 3/8˝ ID - 300 ft.EAC-97SBU Storage cabinet - upperEAC-C Nylon cart cover- fits all ERGO-AIR® carts
®
FIRE SERVICE TECHNICAL RESCUE CART
CUSTOM APPLICATIONSSTAINLESS STEEL
CART OPTIONContact Customer Service
for details
FOR SPECIFICA-TIONS SEE
CATALOG PAGE25 FOR DETAILS
ON THE TECH-RESCUETM
CART
MP-4FRONT VIEW
The patented MULTI-PAK™ series of small bottled air carts has beendesigned with the user in mind. Choose from many basic designs to fit thesimplest or most complex job application. All of the small MULTI-PAK™ cartsfeature fold-down handles, recessed air control panels, rounded cart cor-ners, quick release hose racks, and many other unique features. Choosethe pressure range and the number of fittings that you require. All cartshave input and output pressure gauges. A standard 4-outlet manifold isshown on the cart pictured below.
MP-4REAR VIEW
•Fold down handle•Intrinsically safe low pres-
sure alarm whistle•High flow adjustable regulator•Input and output pressure
gauges•Solid aluminum block
manifold•Handtight CGA fittings with
bleeder valves (exceptModel MP-2L)
•Nylon cylinder straps withVelcro®
•Quick release hose rack•In-line check valves
S TA N D A R D C A R TF E AT U R E S
U.S. Patent #D443,744
MP-C
19
MP-TR1MP-4HSS
Transport and store anyof your MULTI-PAK™
carts with a custom cartcover. Available in 400denier black nylon withvelcro closures at the
top and base.
M U LT I - PA K B OT T L E D A I R C A RT SAVAILABLE WITH CYLINDER PRESSURES FROM 2216 TO 4500PSI
T M
NYLON CART COVER
MULTI-PAK TM Order ing In format ionPlease specify 1/4” Hansen or Schrader fittings when ordering.
Other fittings available for an additional charge.
INDUSTRIAL CARTS MP-2L MULTI-PAK™, 2-cylinder air cart, 2400 psi, supplied with
2-outlet manifold, CGA-346 wrench-tight nuts MP-2H MULTI-PAK™, 2-cylinder air cart, 4500 psi, supplied with
2-outlet manifold, CGA-347 hand-tight nuts MP-4H MULTI-PAK™, 2-cylinder air cart, 4500 psi, supplied with 4-out-
let manifold, high flow regulator, CGA-347 hand-tight nuts
FIRE/RESCUE CARTSMP-TR1 TECH-RESCUE™ Cart, see page 25 for specifications and
detailsMP-4R MULTI-PAK™ Rescue, 2-cylinder air cart, 4500 psi, air cart
designed for the fire/rescue market. Supplied with 4-outlet mani-fold, high flow regulator, CGA-347 hand-tight nuts, cylinderselector valve, additional 0-125 psi regulator with 1-outlet mani-fold for low pressure tools or lift bags.
OPTIONAL CYLINDERSAC-60 60 cf aluminum cylinder - 2216 psiAC-87 87 cf fully wrapped cylinder - 4500psiCART COVERMP-C Black nylon cart cover for small MP-series carts
BB OOTT TT
LL EEDD
AA IIRR
CC AARR TT
SS
Standard MP-Series Control Panel
This MULTI-PAK™ version of the large 2-cylinder air cart has an electronic high intensity lowpressure alarm system that is enclosed in a rugged Air Systems’ case. All the high pressure fit-tings and hardware are mounted in the case to prevent damage from dust and environmen-tal conditions. The alarm system operates on two 9-volt batteries and comes standard with analarm jack for remote low pressure alarm signals. Many customvariations are available - consult customer service for details.
20
ELECTRONIC ALARM VERSION
Front view with hose storage rack that holds
200´ of 3/8˝ hose
The MULTI-PAK™ series of bottled air carts is Air Systems’ latest design for multiple industrial applications.The entire line of carts is designed for easier mobility and function. The large cylinder carts below incor-porate features like protected controls, equipment storage box, narrow profile, and quick-release hosehangers. Pick and choose the features that best suit your job application and work environment.Custom applications are always welcome - Consult Customer Service.
C A R T S T O R AG E B OX
Cylinders Optional
BBOOTTTTLLEEDD AAIIRR CCAA
RRTTSS
MP-2300ENB
MP-2300HNBCylinders Optional
RearView
MP-2300ENB
OPEN VIEW OF AIR CONTROL BOX WITH ELECTRONIC ALARM
D i m e n s i o n s : 62”H x 25”W x 30”D w/cylinders
Our basic MULTI-PAK™ model has 4500 psi hardware, pneumatic low pres-sure whistle alarm, 4-outlet aluminum block manifold, check valves, safetyrelief valve, adjustable regulator with pressure gauge, four respirator cou-plings, and a storage box with latch. The cart is supplied with universal handtight nuts so that either 2400 psi or 4500 psi cylinders can be used. Thefront of the cart has a unique quick release hose rack that will hold 200feet of 3/8” hose; 16” pneumatic tires are standard.
PNEUMATIC ALARM VERSION
M U LT I - PA K B OT T L E D A I R C A RT SAVAILABLE WITH CYLINDER PRESSURES FROM 2400 TO 6000PSI
MULTI-PAK TM Order ing In format ionPlease specify 1/4” Hansen or Schrader fittings when ordering.
MP-2300ENB 2-cylinder cart complete with pneumatic alarm whistle– no cylinders supplied
OPTIONAL CYLINDERSAC-300 300 cf steel DOT cylinder - 2400 psiAC-444 444 cf steel DOT cylinder - 4500psiAC-472 472 cf steel DOT cylinder - 5000psi
CART COVERMP-2300C Black nylon cart cover for 2300 series carts
MULTI-PAK TM Order ing In format ionPlease specify 1/4” Hansen or Schrader fittings when ordering.
MP-2300HNB 2-cylinder cart complete with electronic alarm, nocylinders supplied, 4500psi
OPTIONAL CYLINDERSAC-300 300 cf steel DOT cylinder - 2400 psiAC-444 444 cf steel DOT cylinder - 4500psiAC-472 472 cf steel DOT cylinder - 5000psi
CART COVERMP-2300C Black nylon cart cover for 2300 series cartsREMOTE ALARM50-ALMST Electronic 9-volt DC low pressure alarm with
strobe and 50ft cable
T M
Cabinet widths:
21
Order Cylinders Separately
Accepts either 2216 psior 4500 psi cylinders
BBOO TT
TT LLEE DD
AAII RR
CCAA
RR TTSS
S P E C I F I C A T I O N S• Designed for short duration
usage – weighs 7 lbs. withoutcylinder
• 2-outlet manifold• Holds either a 2216 psi or 4500
psi cylinder• Adjustable regulator and low
pressure alarm whistle• Designed to fit our optional poly-
ethylene carrier pictured above• Specify desired
fittings whenordering,Hansen orSchrader 1/4˝standard
• Dimensions:34˝L x 7.4˝W x4.5˝D
Optional UNI-PAK™ carrier, order part no.
SVH-DC25
PAK-UNI1
PAK-3
Order Cylinder Separately
S P E C I F I C A T I O N S• High pressure 4500 psi regulator
with CGA-347 connections,handtight nuts
• Low pressure warning alarm whistle• Check valves in-line to allow inde-
pendent cylinder operation andremoval
• Orange powder coated aluminumframe with padded carry handles
• 4-outlet breathing air manifold withsafety relief valve
• Quick connect couplings with dustcaps; specify desired fittings whenordering
• Optional wall mount brackets andpull cart available - see orderinginformation below
S P E C I F I C A T I O N S• CGA-347 operation at 4500 psi• Adjustable cylinder straps with velcro• 3-way high pressure directional valve• External high pressure male inlet, CGA-347• Low pressure regulator for pneumatic tools• 8” diameter ball bearing wheels• Adjustable output regulator w/relief valve• In-line check valves• Telescoping aluminum handle• Rear hose rack• HI-VIS reflective tape on cart• Removable air cylinder tray• Low pressure alarm whistle• Weight: 37 lbs. without cylinders• Dimensions: 33”H x 25”W x 17”D
PAK-4 RESCUE CART
With Removable Air Cylinder Tray
Telescoping2-Position Handle
LP-3LNBBR-6ALLIFT-PAK™ is designed for ease of lifting multiple packs ofair cylinders. LIFT-PAK™ can be supplied complete with arespirator regulator, manifold, safety relief valve, low pres-sure alarm whistle, hardware, and cylinders. The LIFT-PAK™ frame has a center lift hook and is manufacturedwith heavy gauge steel or aluminum.
CUSTOM OPTIONS AVAILABLE
UNI-PAK™SINGLE CYLINDER “PAK”
T M
T M
PAK-4R
Dimensions: 29”L x 21”W x 6”D
S P E C I A LT Y B OT T L E D A I R “ PA K S ”PORTA-PAK™
TWIN CYLINDER “PAK”
Por ta-Pak TM Order ing In format ionPlease specify 1/4” Hansen or Schrader fittings when ordering.
PAK-3 PORTA-PAK™ complete without cylindersPAK-CRT PORTA-PAK™ cart only, steelPAK-CRTC PORTA-PAK™ cart cover, aluminum. Fits cart model PAK-CRT PAK-C PORTA-PAK™ cover, nylonPAK-WM PORTA-PAK™ wall mount brackets, 2 each
Rescue Car t Order ing In format ionPlease specify 1/4” Hansen or Schrader fittings when ordering.
PAK-4 Bottled air tray assembly complete without cylinders, cart, or coverPAK-4R Same as PAK-4 with cart model PAK-CRTPAK-CRT PORTA-PAK™ cart onlyPAK-CRTC Cart cover - aluminumPAK-C PORTA-PAK™ nylon cover
T M
BOTTLED AIR LIFT-PAK T M
22
Cart shown withModel CBA2-346
breathing airassembly option
MODEL CSC-3072STANDARD
VERSION CARTor
Customize your own cart!
Call customer service today
2 each 14˝ deep cabinets1 each 28˝ deep cabinet
10˝ pneumatic tiresshown above are
optional
Steerablefront end
Steel deckrated 2000 lbs.
Cabinet widths: 30˝ 30˝C
abinet height:34˝
Cylindersoptional
BBOOTTTTLLEEDD AAIIRR CCAA
RRTTSS
Optional Tripod
Steerablefront end
Steel Cylinder Rack Powder Coat BlackSteel Deck
30”W x 72”L
Order Cylinders Separately
The AIR-WAGONTM has been designed to hold four or sixlarge breathing air cylinders for use in industrial plantsand hospitals. A six outlet air control panel is installedwith a low pressure alarm bell or optional electronic highintensity alarm. A CGA-347 male inlet is provided to bulkfill the air cylinders without removing them from the cart.10” semi-pneumatic tires provide ease of mobility.
ORDER AIR CYLINDERS SEPARATELY
Air control panelwith gauges and
on/off valves
Optional high intensity electronic alarm
AW-6HNB-HA
C O N F I N E D S PAC E E N T RY C A RT
Conf ined Space Car t Order ing In format ionCSC-3072 Standard confined space cart with 10” semi-pneumatic tires. Order cylinders and high pressure hardware, and tripod separately (cart
shipped fully assembled) - tripod sold through local distributorsCSC-3072P Standard confined space cart with 10” pneumatic tiresCBA2-346NB 2 cylinder breathing air assembly, no cylinders - 2400 psiAC-300 300 cf air cylinder, 2400 psiAC-444 444 cf air cylinder, 4500 psi
A I R - WAG O NLARGE CYLINDER BREATHING AIR CART
AIR WAGON TM Order ing In format ionAW-6NB AIR-WAGON™, includes hardware and cylinder
straps for 6 cylinders, low pressure alarm bell -2400psi
AW-6HNB AIR-WAGON™, includes hardware and cylinder strapsfor 6 cylinders, low pressure alarm bell - 4500psi
AW-6NB-HA AIR-WAGON™, includes hardware and cylinderstraps for 6 cylinders, electronic alarm - 2400psi
AW-6HNB-HA AIR-WAGON™, includes hardware and cylinder straps
S P E C I F I C A T I O N S•30˝ W x 72˝ L x 48˝ H steel cart rated
for 2000 lbs. with 10˝ semi-pneumat-ic tires, 1200 lbs. load rating withoptional pneumatic tires
•3-cabinet design, galvanized steel,with shelving; 2 ea. 14˝ deep, 1 ea.28˝ deep
•Nylon bottle straps with extra steelsafety chains
•Combination “T” handle with “PintleHitch”
•Articulating (steerable) front end•Top rubber mat with tie-downs for
storing retrieval tripod•Order cylinders, regulator/manifold
assembly, and tripod separately•Optional wheel chocks available
C U S T O M I Z I N G S U G G E S T I O N S•Leave off a cabinet and add a blower
or extra air cylinders•Make it wider or longer
T M
23
BBOO TT
TT LLEE DD
AAII RR
CCAA
RR TTSS
CBF3-346
CBA3-346
CASCADE BREATHING AIR ASSEMBLIES(Cylinders Sold Separately)Air Systems’ cascade breathing air assemblies offer a complete system for use with airlinerespirators. Additional cylinder connecting whips can be added to extend breathing aircapacity with additional cylinders.
CASCADE BOTTLE FILL ASSEMBLIES(Cylinders Sold Separately)Air Systems’ cascade fill assemblies are used for refilling either 2216 psi or 4500 psi SCBAcylinders. Fill assemblies include a 5 ft. high pressure fill whip with gauge, universal hand-tight nut, on/off and bleed valve. Cylinder connecting whips are supplied with a CGAstem, nut, and tee assembly. Additional cylinder connecting whips can be added to anyof the below assemblies for multiple or extended SCBA fill capacity.
AIR CYLINDER CONNECTING
WHIPS
BREATHING AIR REGULATORS
BREATHING AIR REGULATOR/MANIFOLDS
RG-3000
HP-CW1-346
PRESSURES AVAILABLE FOR 6000psi SERVICE. CONTACT OUR SALES DEPARTMENT FOR DETAILS
CW-30
PRESSURES AVAILABLE FOR 6000psi SERVICE. CONTACT OUR SALES DEPARTMENT FOR DETAILS
Cylinders Sold Separately
Manifold assemblies available from 1 to 8 outlets
RG-6000FIL
B R E AT H I N G A I R A S S E M B L I E S
Bot t le Fi l l Order ing In format ionCBF4-346NB 4 cylinder fill assembly, 2400psi, CGA-346 fill whip and
connecting whips, no cylindersCBF4-347NB 4 cylinder fill assembly, 5000psi, CGA-347 fill whip and
connecting whips, no cylindersCBF4-702NB 4 cylinder fill assembly, 6000psi, CGA-347 fill whip and
connecting whips, no cylindersAdditional Fill Assemblies Available. Contact our Customer Service Department.
Cascade Brea th ing Order ing In format ionCBA3-346NB 3 cylinder breathing air assembly, 2400psi, includes regulator,
4-outlet manifold assembly, low pressure alarm whistle, relief valve, connecting whips with check valves, no cylinders
CBA3-347NB 3 cylinder breathing air assembly, 4500psi, includes regulator,4-outlet manifold assembly, low pressure alarm whistle, relief valve, connecting whips with check valves, no cylinders
Additional Breathing Air Assemblies Available. Contact our Customer Service Department.
Regula tor Order ing In format ionPlease specify fittings when ordering.
RG-3000 CGA-346, 3000psi, adjustable regulator, dual gauge, relief valve and 1/4” QD fittingRG-5000 CGA-347, 5000psi, adjustable regulator, dual gauge, relief valve and 1/4” QD fittingRG-6000FIL Fill regulator, 6000psi inlet, 0-5000 psi outlet with gauges, CGA-347 inlet
Regula tor /Mani fo ld Order ingIn format ion
HP-CW1-346 4-outlet manifold assembly with safety relief valve, 3000 psi regulator, CGA-346 connection, low pressure alarm whistle, 4 fittings
HP-CW1-347 Same as above with CGA-347 connection, 5000 psi regulator, low pressure alarm whistle, 4 fittings
Connect ing Whip Order ingIn format ion
WITHOUT CHECK VALVESCW-30 Connecting whip with tee, CGA-346 stem and nutCW-30HP Connecting whip with tee, CGA-347 stem and nutWITH CHECK VALVESCWCV -30 Connecting whip with check valve, tee, CGA-346
stem and nutCWCV -30HP Connecting whip with check valve, tee, CGA-347
stem and nut
P R E S S U R E S AVA I L A B L E T O 6 0 0 0 P S I
Cylinders Sold Separately
LARGE CYLINDER STORAGE RACKS
Order ing In format ionBR-1 1-cylinder rack wideBR-2 2-cylinder rack wideBR-3 3-cylinder rack wideBR-22 2 deep x 2 wide, 4-cylinder rackBR-23 2 deep x 3 wide, 6-cylinder rack
CALL FACTORY FOR PRICING ON ANY RACK DESIGN FORMULTIPLE CYLINDER STORAGE NEEDS
Heavy-duty steel floor storage racks can be ordered in anycombination to meet cylinder storage requirements. Rackscan be floor or wall mounted. Two heavy gauge chainswith snap hooks are supplied for each row of cylinders.
Holds up to 87 cf size SCBA cylinders BBOOTTTTLLEEDD AAIIRR CCAA
RRTTSS
AIR STORAGE CYLINDERSAC-300
AC-60AC-87
CYLINDER FILL WHIPSLOW PRESSURE
HP-FW5-346CGA-346 Fill Whip 3000 psi Maximum
HIGH PRESSUREHP-FW5-347
CGA-347 Fill Whip5000 psi Maximum
ULTRA HIGHPRESSUREHP-FW5-702
CGA-702 Fill Whip6000 psi Maximum
5 ft. Hose
On/Off Valve
Pressure Gauge
Bleed Valve
UniversalHand-Tight Nut
HP-FW5-346
Order any size rack ineither vertical or horizontalstyle. Systems can beordered with cylinders andall hardware supplied atpressures up to 6000 psi.Air control panels can becustomized for the mostdemanding applications.Contact the Air Systems’Customer ServiceDepartment to provideengineering drawings andpricing.
CUSTOM HORIZONTAL CYLINDER STORAGE RACKS
24
TR-4
HIGH PRESSURE CGA FITTINGSWRENCH TIGHT SERIES
CGA-346 SeriesMaximum pressure -3000psi
CGA-347 SeriesMaximum pressure, 5500psi
HAND TIGHT SERIESMODEL SS347HTCGA-347 Universal hand tightfits CGA-346 or 347 malethread, maximum pressure5500psi
MODEL SS347SNHTCGA-347 High pressure handtight fits CGA-347 male threadonly, maximum pressure5500psi
CGA-702Maximum pressure, 7500psi
Order ing In format ionQUICK FILL HOSE ASSEMBLYQDF-5 5ft. Quick-Fill hose with FD-17 female coupler,
1/4” JIC swivel endCOUPLINGSQDAFD17F FD-17 female Aeroquip® coupler, 1/4” SAE
threadsQDAFD17FC FD-17 female cap coverQDAFD17M FD-17 male Aeroquip® plug for SCBA unitQDAFD17MC FD-17 male cap cover
FD-17 Aeroquip®
couplers
SAFETY FILL ADAPTER
CGA-347 TO CGA-346
2400psi set pressure
MODEL HT -346RV
B OT T L E D A I R AC C E S S O R I E S
SCBA CYLINDER STORAGE RACK
Cyl inder Order ingIn format ion
AC-60 60 cf DOT CGA-346, 2216 psi, aluminumAC-87 87 cf DOT CGA-347, 4500 psi, fully
wrapped carbon fiber AC-300 300 cf DOT CGA-346, 2400 psi, steelAC-444 444 cf DOT CGA-347, 4500 psi, steelAC-472 472 cf DOT CGA-347, 5000 psi, steelAC-509 509 cf DOT CGA-702, 6000 psi, steelASME-420 420 cf ASME, 5000 psi, steel REQUIRES
SPECIAL FITTINGS AND GAUGES
Storage Rack Order ing In format ionTR-4 4-cylinder steel rack with plastic coatingTR-6 6-cylinder steel rack with plastic coating
Order ing In format ionCGA-346 SERIESHPBR025 CGA-346 Brass NutHPBR026 CGA-346 Brass StemHPBR027 CGA-346 Brass Stem
with Check ValvesCGA-347 SERIESHPBR049 CGA-347 Brass NutHPBR050 CGA-347 Brass StemVC4SMMSS CGA-347 Brass Stem
with Check ValvesCGA-702 SERIESSS702N CGA-702 Brass NutSS702S CGA-702 Brass StemVC4SMMSS CGA-702 Brass Stem
with Check Valves
CGA-346 CGA-347
Relief Valve
SCBA QUICK-FILL HOSE COUPLINGS AND FILL HOSE
F FI IR RE E
/ /R RE ES S
C CU UE E
EE MMEE RR
GGEE NN
CC YY SS
EE RRVV II
CC EESS
MODEL MP-TR1U.S. Patent #D443,744
Upper Hose Rack
RespiratorL/P Alarm Whistle
0-125 psi OutputRegulator
Respirator Fittings
(user specified)
Lower Hose Rackwith Quick
Release Pin
Hi/Low PressureRelief Valve
Switch
Yellow SideRespirator Air
Control
Blue SideTool Air Control
Transport andstore any of yourMULTI-PAK™ carts
with a customcart cover.
Available in 400denier black nylon
with velcro closures at the top
and base.
25
The patented TECH-RESCUE™ Cart has been designed to provide air for all ofthe various respirators and unique rescue tools that are used by TechnicalRescue teams. Air Systems has designed a unique stainless steel cart with a color-designat-ed control panel to allow one side of the panel to be used for primary respi-rator breathing air and oneside for tool/secondary airrequirements. Two 1-hour SCBA cylinders or high pressure cascade cylinder air can be used tooperate the air control panel.The standard features of theTECH-RESCUE™ Cart make itthe most versatile and uniqueair cart in the fire serviceindustry.
The TECH-RESCUETM cartis now available with anoptional 5ft. Quick-Fillhose assembly to meetNFPA requirements.
CGA-347 Inlet
Tool AirL/P Alarm Bell
Air Isolation Valve
0-250 psi Output Tool Regulator
Tool Fittings(user specified)
0-125 psi Regulatorfor Accessory ToolOutlet Fitting
Low PressureAccessory Air Tool/Lift Bag Fitting
Storage Box
NYLON CART COVERMP-C
T E C H - R E S C U E C A RT
C A R T W E I G H T & D I M E N S I O N S
Width: 21.0”/53.3cmDepth: 15.5”/39.4cmHeight with Handle Down: 34.5”/87.6cmHeight with Handle Up: 41.5”/105.4cmWeight: 55.0 lbs/121kg
TECH-RESCUE TM Order ing In format ionPlease specify 1/4” Hansen or Schrader fittings when ordering.
MP-TR1 TECH-RESCUETM Cart, 1/4” Hansen or Schrader fittings standard. Optional fittings available at an additional charge. (Cylinders sold separately)
ACCESSORIESAC-87 87cf carbon fiber cylinder with gauge, 4500 psi rated,
1 hourAC-60 60 cf aluminum cylinder,2216 psi rated, 30 minuteCW-300 25 ft. (300”) high pressure connect whip, CGA-347
hand-tight on each end with bleed valves, connects from cart to truck/cascade air supply
MP-C Black nylon cart cover, fits all small Multi-PakTM Series cartsQFH-5 Quick-Fill hose, 5ft., 4500psi, female FD-17 coupler
with cover cap, 1/4” male thread
T M
The special nylon cylinder/regulator frameassembly (DRAG-REG) has been designedspecifically for use in the DRAG-BAG™.Install a 30 or 60 min. 4500psi cylinder onthe frame and secure firmly with anadjustable cylinder strap. A pressure gauge,safety relief valve, CGA-347 hand tight nut,an adjustable air pressure regulator preset at100psi are provided as standard. A 1/4”industrial interchange coupling is supplied onthe frame for air hose attachment. DRAG-REG Frame Size: 27”L x 9”W Weight (w/o cylinder): 6.4 lbs
Interior Specifications:Black reinforced PVC material. Water and mildew resistant with 1/2”dense foam padding on top provides the strength and shock resistancefor the most hazardous rescues.
26
Rescue professionals helped design theDRAG-BAG™ system. It is designed tobe carried or dragged into the tough-est rescue scenarios supplying the air,rope, hose and tools a rescuer wouldneed during rapid intervention andrescue.
DRAG-BAGTM
Model DBRS-1QFwith Quick-Fill Hose
Model QFH-5
QFH-5Quick-Fill Hose
Three internalpouches are provid-ed to fit differenttypes of equipment.One large 6”H x 17”Lpouch is designed forMotorola radios withan extended batterypacks. Two 4”H x7”L pouches are pro-vided for small equip-ment like a mandown alarm or First-Aid supplies.
D R AG - BAGRESCUE SYSTEM
DESIGNED FOR RAPID INTERVENTIONAND USAR TEAMS
DRAG-BAG TM Order ing In format ionDBRS-1 DRAG-BAGTM Rescue System complete with DRAG-BAGTM and DRAG-REG (regulator/cylinder frame assembly) - order cylinders separatelyDBRS-1QF Rescue system complete with DRAG-BAGTM, DRAG-REG, and QFH-5 Quick-Fill hose with FD-17 coupler - order cylinders separately
OPTIONS/ACCESSORIESDRAG-BAG Complete bag only, no accessories or regulator/cylinder frameDRAG-REG Regulator/cylinder frame assembly - holds 30 or 60 minute 4500psi cylinders, preset adjustable regulator, hand tight wheel, nylon
removable frame, 125psi relief valve, 1/4” industrial interchange fitting and low pressure alarmH-15DB 15 ft. of 3/8” breathing air hose with1/4” female “Y” fitting, no couplings, order separatelyH-25DB 25 ft. of 3/8” breathing air hose with1/4” female “Y” fitting, no couplings, order separatelyQFH-5 Quick-Fill hose, 5ft., 4500psi, female FD-17 coupler with 1/4” male thread. (Option to add to the DBRS-1 for NFPA 1981 regulation).AC-87 87cf carbon fiber cylinder with gauge, 4500psi, 1 hour rated, CGA-3472020B Pelican’sTM Super SabreLightTM, straight Xenon lamp, 3-cell, “C” batteries not included3700 Pelican’sTM Big EDTM, right angle Xenon lamp, 4-cell, “C” batteries not included
External Specifications:The DRAG-BAG™ is constructed externally of 18oz PVC material reinforced with 1000 denier scrim material. The fabric is flame retardant and permanently treated to meet NFPA-701 and California codes.
Note: Air cylinders, rope, and hose sold separately.
Size: 33”L x 11”H x 10”WWeight: 5.0 lbs/12.3 kg
Two external zippered pouches. One side pouch for holding up to300 ft. of Kevlar rope. This pouch has steel grommet outlets, frontand rear, to allow rope to pan out without removing it from the bag.The other side pouch is designed to hold up to 25 feet of 3/8”breathing air hose. A reinforced “pass through” hole is provided toconnect directly with the air regulator assembly inside the bag.Reflective striping on both sides of bag.
PelicanTM Lightsare availableas an option
FF II RR EE // RR EE SS CCUU EE
EE MMEE RR GG
EE NNCC YY SS EE RR VV II CC
EE SST M
27
CGA-347 male adapterused as a high pressure(4500psi max) auxiliary
inlet. It can be connectedto a high pressure
compressor or a truckmounted cascade system.
Inlet whips are connected to 2216 or
4500psi cylinders
Low pressure breathing airmanifold, 125psi max
Inlet whips are connected to 2216 or
4500psi cylinders
Low pressurewhistle
Low pressurebreathing air
manifold,125psi max
Low pressuretool manifold,
250psi max
System isolation valve usedto isolate breathing air
manifolds so unit can beused in rescue operations.
This design wasimplemented to conform
with NFPA confined spaceentry rescue regulations.
Fill whip included with MACK-3FA
option
Light for operation inlow light conditions
M A C K(MULTI-AIR COMMAND KIT)
The MACK™ units have been designed as a series ofportable air distribution boxes to meet the most demand-ing air handling needs of the Fire/Rescue industry. Eachunit has been designed and tested by professional fire-fighters to meet the changing industry and NFPA require-ments. All models have been manufactured to provideemergency low pressure breathing air from either SCBAcylinders or from a bank of large storage cylinders locat-ed on Fire Department vehicles. More advanced modelsoffer multiple air pressure regulators for confined spacerescue operations, mid-range pressure for rescue tooldevices, and high pressure emergency air cylinder fillingsystems. Choose a standard MACK™ unit to fit your needsor call our Customer Service Department to design a unitfor your special air handling applications.
T M
All MACK™ Series units startwith the MACK-1 basic func-tions. One or two SCBA cylin-ders provide air to the system;a CGA-347 high pressure inletis also provided to allow con-tinuous operation from truckmounted air cylinders. A lowpressure regulator provides 0-125 psi air to a four outlet res-pirator manifold. A low pres-sure alarm whistle and a 6volt DC lamp to illuminate thecase interior are provided as standard.
Optional fill regulator assembly to
fill SCBAsOrder a MACK-3 withMACK-3FA installed
PressureGauge
The MACK-3 system has been designed and tested by fire andrescue professionals.
Four separately regulated air systems provide a portable airdistribution package for any pressure requirement.
FillWhip
Connection
MACK-1
MACK-2
MACK-3
F FI IR RE E
/ /R RE ES S
C CU UE E
EE MMEE RR
GGEE NN
CC YY SS
EE RRVV II
CC EESS
MACK-2
M AC K S Y S T E M SAIR DISTRIBUTION FOR BREATHING, F ILL ING AND RESCUE TOOLS
The MACK-2 unit has all the same features as the MACK-1with the addition of a 0-5000 psi adjustable fill regulator.A 5 ft. fill hose is provided with hand tight wheel andbleed valve. An optional Quick fill hose can be ordered,see page 28.
T M
28
T M
RP-1H
The RESCUE-PAK™ was designed for the fire and rescue teamsthat want to keep all their respiratory gear in one water-tightcase. Two respirators and two 50 ft. hose sections will easilystore in the unit along with a single one hour 87cf air cylinder.An optional CGA-347 inlet can be installed for direct connec-
tion to an external bank of cylinders forlong duration rescues. A fold downhandle and roller wheels are built in thecase. Standard hardware includes adual gauge high pressure 4500psiadjustable regulator, low pressure alarmwhistle, safety relief valve, CGA-347hand tight nut, cylinder straps, and twolow pressure respirator couplings.
CUSTOM OPTIONS AVAILABLE
RESCUE-PAK
D i m e n s i o n s : 2 0 ” D x 3 2 ” L x 1 1 ” H
Cylinder, hose, and respirator sold separately
FF II RR EE // RR EE SS CCUU EE
EE MMEE RR GG
EE NNCC YY SS EE RR VV II CC
EE SS
An optional 5ft.Quick-Fill hoseassembly cannow be addedto comply withNFPA 1981 regulations.
QFH-5
MACK-NFPA3
MACK TM Order ing In format ionMACK-1 4-Outlet manifold, 5000 psi regulator, 2 high pressure cylinder whips, 1 H/P inlet port, L/P alarm whistleMACK-2 MACK-1 with the addition of a high pressure fill regulator and 1 fill whip, optional 2nd fill whip available for installationMACK-3 8 L/P respirator/tool outlets (0-150 psi), 3 medium pressure outlets (0-250 psi), 4 H/P inlet whips, 1 H/P CGA-347
inlet and pressure cap, L/P alarm whistle, optional fill regulator and hoseMACK-3FA Fill regulator assembly for MACK-3, includes 5ft. fill hoseMACK-NFPA1 Dual independent regulators with 3-outlet manifolds, dual low pressure alarms, 4 each 5 ft. connect whipsMACK-NFPA3 MACK-NFPA1 with the addition of a regulator isolation valve and CGA-347 H/P inlet and cover capQFH-5 Quick fill hose, 5ft., 4500psi, female FD-17 coupler, cover cap, 1/4” male thread. Meets NFPA 1981 regulation.
CUSTOM VARIATIONS AVAILABLE - CONTACT CUSTOMER SERVICE
M AC K S Y S T E M SAIR DISTRIBUTION FOR BREATHING, F ILL ING AND RESCUE TOOLS
Air Distribution System DesignedSpecifically for Confined Space
Rescue TeamsThe MACK-NFPA™ series has been developed specifically for theFire/Rescue teams working under NFPA guidelines. The NFPA versionof the MACK™ unit comes in two standard models. Each model hastwo separate regulator/manifold systems. Two SCBA connect whipsare provided for each regulator. In the event of a regulator malfunc-tion, rescue can be performed on the standby regulator system. Thebasic unit described above, Model MACK-NFPA1, can have a regula-tor isolation valve added to allow one or both air sources to be usedsimultaneously; this addition forms the Model MACK-NFPA3 whichhas a CGA-347 high pressure inlet included.
T M
T M
M A C K - N F PAS E R I E S
29
The AIR RESPONDERTM series of breathing air trailers have been designed for mobile quick response at an economicalprice. These trailers provide breathing air for airline respirators, rescue air tools, or SCBA quick filling. The AIR RESPON-DERTM comes in two series. The 100 series is an open frame six (6) cylinder trailer. The 200 series is an enclosed eight(8) cylinder trailer with optional side storage compartments. Both trailers have a rear air control panel with respiratorcouplings and CGA-347 fittings to bulk fill the storage cylinders and provide for attachment of a quick fill hose for SCBAfilling. An optional cascade fill panel is available for both trailer series. The front of each trailer will hold optional stor-age boxes, small fill compressors, or generators.
F FI IR RE E
/ /R RE ES S
C CU UE E
EE MMEE RR
GGEE NN
CC YY SS
EE RRVV II
CC EESS
AR-101Cascade Air Control Panel
OPTIONAL HOSE STORAGE RACKS
MOBILE BREATHING AIR TRAILER SERIES
AIR RESPONDER TM Order ing In format ionPlease specify 1/4” Hansen or Schrader fittings when ordering.
AR-100 Basic 100 Series Trailer, w/o Cylinders, Standard Air Control PanelAR- 101 Basic 100 Series Trailer, w/o Cylinders, Cascade Air Control PanelAR-200 Basic 200 Series Trailer, w/o Cylinders, Standard Air Control PanelAR-201 Basic 200 Series Trailer, w/o Cylinders, Cascade Air Control PanelACCESSORIESHP-FW5-347 SCBA 5ft. Fill WhipCW-300 25ft. High Pressure Trailer Fill Whip, CGA-347 Hand-tight on each end with
Bleed ValvesAR-100SC Storage Case for mounting on front of 100 Series TrailerAR-100HR Hose Racks (2 each) mounted on sides of 100 Series TrailerAR-100SC Storage Compartments for both sides of 200 Series TrailerNote: Final specifications and a drawing will be provided for customer approval
prior to order acceptance.
AVAILABLE CUSTOM OPTIONS• Fill Regulator Installed• Electric Brakes• Custom Paint• Hose Reels Installed• Storage Cabinet• Generator• Special Compressor Filters• CO Monitor Installed on
Compressor• Fully Enclosed Wells Cargo Trailer
AR-200Standard Air Control Panel
AR-100Standard Air Control Panel
Optional StorageCompartments
Optional StorageHose Racks
A I R R E S P O N D E R
Contact our Customer Service Departmentfor more information on other Custom
Trailer Sizes and Options
T M
EQUIPMENT STORAGE CASE AVAILABLE FOR ALL MODELS
30
Slide-in vehicle high pressurecompressor system packageswith all-in-one capabilities aredesigned to meet industrialand stringent military readi-ness applications
Economical breathing air trailers Custom air controlpanels for any airdistribution application
Air Systems designs andmanufactures all types of custom breathing air systems.
Contact our CustomerService Department todevelop a system to meetyour specific applications.
Complete our high pressure design questionnaire available online at www.airsystems.comand Air Systems’ Engineering and Sales Departmentwill provide AutoCAD® drawings and pricing.
Slide-in vehicle mounted bottled air systems
Slide in vehicle rack systemsto upgrade rescue vehicles
Full service enclosed breathing air trailerswith compressor, storage, filling, and air
distribution Available with full sound proof
enclosure option
Breathing air trailers with custom storage and air delivery for military readiness and emergencyresponse for nuclear, chemi-cal and biological applica-tions
FF II RR EE // RREE SS CC UU
EEEE MM
EE RR GGEE NN CC YY SS EE RR VV II CC EE SSCustom high capacity breathing air
cylinder system
C U S TO M S Y S T E M SFIRE AND RESCUE TRAILERS AND ACCESSORIES
31
CFM outputs available from 2.9 to 8.4 cfm on portable series
ELECTRIC , GASOLINE OR DIESEL ENGINESAVAILABLE
ELECTRIC MOTORDRIVE
Certified laboratory air testing is nowavailable for high pressure bottled airor low pressure compressor airrequirements. Take your own samplesin 10 minutes and send out for pre-cise laboratory results. A 2LAaccredited lab will test to any recog-nized standards, e.g., CGA, NFPA, orFederal MIL Specs. Results can beobtained in less than 3 days or expe-dited service is available at an extracharge. AIR SAMPLING KITS AVAILABLE FOR RENTAL
OR PURCHASECONTACT CUSTOMER SERVICE FOR DETAILS
LABORATORY AIR TESTING SERVICE
ALL-IN-ONE CONTAINMENTFILL STATIONS
Air Systems provides the BAUER line ofhigh pressure fill compressors and outfitscustom airline monitors, air storage, and airdistribution systems. We can provide out-put air pressures to 6000psi and over145cfm capacity.
• • • We specialize in designing customsystems to meet military, fire,rescue and industrial fill applications.
Call Air Systems’ customer service depart-ment to discuss your particular application.A high pressure compressor questionnaireis provided online to aid us in designingthe system to meet your needs. This ques-tionnaire is available on our web site atwww.airsystems.com
HORIZONTAL FILL COMPRESSOR
VERTICAL FILL COMPRESSOR
PORTABLE FILL COMPRESSOR
MODEL ACK-97 ELECTRIC MOTOR DRIVE
F FI IR RE E
/ /R RE ES S
C CU UE E
EE MMEE RR
GGEE NN
CC YY SS
EE RRVV II
CC EESS
BAU E R F I L L C O M P R E S S O R SSTANDARD AND CUSTOM SYSTEMS
32
from BAUER meet NFPA-1901 fill requirements
CFSII-2SStationary with bulkfill control panel
CFSII-1S Stationary with bulk fill control panel
CFSII-3SStationary with cascade controlpanel
SERIES 40 RACK MODEL AK40-35
Series 24 has beendesigned to fit infire/rescue trailers andtrucks requiring a nar-rower profile. THREADSAVERS® (TS) picturedare optional. Add “TS”to model number whenordering.
SERIES 24 RACK
MODEL AK24-11
THREAD SAVER®
Bauer’s newest designs for containment fill stations are now available with reduced sizes and weights. Stations are avail-able in one, two, or three cylinder fill capacities and can be ordered for stationary or mobile (vehicle) applications. Doordesigns have been improved to provide better ergonomic action for the operator. Many options are available to meet themost demanding fill requirements. Bulk or cascade fill control panels can be ordered with either top or side mounting.Call customer service to help design the containment fill station to meet your needs.
The Air-Kaddy’sTM unique modular design allows for expansion as needed to accommodate your SCBAstorage requirements......today and in the future! Available in Free Standing, Series 40 and one VehicleStyle, Series 24. All racks are lined with nylon pads to prevent cylinder scratches.
CONTACT CUSTOMER SERVICE FOR CUSTOM SIZES!
F R AG M E N TAT I O N F I L L S TAT I O N SCONTAINMENT F ILL STATIONS
AIR-KADDY TM Order ing In format ionSERIES 24: 25.25”W X 22.25”DAK24-8 AIR-KADDYTM 8 cylinder rack - 32”HAK24-11 AIR-KADDYTM 11 cylinder rack - 48”HAK24-18 AIR-KADDYTM 18 cylinder rack - 60”HAK24-24 AIR-KADDYTM 24 cylinder rack - 76”H
SERIES 40: 37.5”W X 22.5”DAK40-15 AIR-KADDYTM 15 cylinder rack - 36”HAK40-25 AIR-KADDYTM 25 cylinder rack - 60”HAK40-35 AIR-KADDYTM 35 cylinder rack - 68”HAK40-40 AIR-KADDYTM 40 cylinder rack - 76”HTHREAD SAVERS® are optional.Add “TS” after part number to include when ordering.
ACCESSORIESVAL -TS THREAD SAVER® - cylinder thread protector
T MA I R K A D DYMODULAR ALUMINUM SCBA CYLINDER STORAGE RACKS
FF II RR EE // RR EE SS CCUU EE
EE MMEE RR GG
EE NN CC YY SS EE RR VV II CCEE SS
33
MODEL PPV-20H
Air Systems has the first PPVblower in the industry with allthe features that are demandedby fire service and industry professionals.
•Lightweight all aluminum frame weigh-ing 67 - 81 lbs. depending on Modelselected
•High air volume and pressure outputfrom fiberglass reinforced blades, indi-vidually replaceable
•One-hand tilt operation to choose mul-tiple positions for ventilation angle
•Compact storage size with foldinghandle design
•Choice of several models inelectric or gasoline
• Full pneumatic 9”tires with friction brake
Dimensions with Handle Collapsed23”L x 21”W x 25”H
+20 Degree Upward Tilt
-14 Degree Downward TiltPositive Locking Friction Brake
One Hand OperationOne Hand Pull and Tilt Operation to
Adjust Flow Angle
TM
Lightweight andcompact designallows for ease ofstorage in smallequipment cabinetslocated on emergency vehicles
SPECIFICATIONS AND ORDERING INFORMATION MODEL SET # OF BLADE WEIGHTNUMBER DESCRIPTION ENGINE HP CFM BACK BLADES SIZE LBS/KGS
PPV -20GH Gasoline Honda 6.0 15,277 6’ 8 20” 67/147.4
PPV -20E Single Speed Electric - TEFC 1.5 11,198 6’ 8 20” 76/167.2
PPV -20EV Variable Speed Electric - TEFC 1.0 10,987 6’ 4 20” 79/173.8
PPV -20EXP Explosion-Proof Electric - TEFC 1.0 9,185 6’ 4 20” 81/178.2Class I, Div. I, Group D, Class II,Div. I, Groups E, F, G
F FI IR RE E
/ /R RE ES S
C CU UE E
EE MMEE RR
GGEE NN
CC YY SS
EE RRVV II
CC EESS
POSITIVE PRESSURE VENTILATOR
U.S. Patent #’s D484,586S,D484,589S
Other U.S. and Foreign PatentsPending
41
AirFlow
Blower Attached toPetro-Vent™ Adapter
Petro-Vent™Threaded To 4˝
Vent Pipe
CompressorHose w/
Shut-Off Valve➔ ➔
PETRO-VENT™
VENTILATOR
Quick ConnectCouplingOrdered
Separately
Order Air HosesSeparately
(Optional ModelASI-29ADPT Fits ASI-2900)
PNEUMATIC CIRCULAR JET FAN• 20˝ diameter• Fits API tank flange• 10,400 cfm free air maximum
@ 40-110 psi input pressureand 60-290 cfm flow
• Cast aluminum housing andfan blade
• Weight: 100 lbs.
VAPOR REMOVALSYSTEM
AIRFLOW
➔➔
➔
➔➔➔
➔➔
UNDERGROUNDSTORAGE TANK
CHEMICAL IN TANK
Order fittingsseparately
ASI-1000
ASI-1200
ASI-2900ASI-4100
PETRO-VENT™ TANK VENTILATOR
This blower has beendesigned to meet venti-lation requirements forunderground storagetanks. A special flangeadapter has been devel-oped to thread directlyon the 4-inch vent pipefound on most storagetanks. The ASI-1200blower bolts directly onthe compatible flange.
TYPICAL SET -UP COMPONENTS
ASI-1200
ASI-12ADPT
Ideal ForExhausting
Hazardous VaporsFrom Below Ground
Locations
MODEL ASI-JF20
VV EENN
TT IILL AA
TT IIOO
NN
V E N T U R I S T Y L E B L OW E R SPNEUMATIC AIR HORNS/EDUCTORS
VENTURI BLOWER FEATURES
• Used to ventilateexplosive and haz-ardous vapors orfumes safely
• No moving parts• Lightweight cast alu-
minum base• Static grounding lug
is standard• Operates on com-
pressed air or steam• Galvanized steel
horn (replaceable)• Operating pressures
up to 140 psi• Larger models avail-
able up to 8000 cfmcapacity – consultfactory
• Rubber coated steelhandle
These Blowers Are Often Called “Air Horns” or “Eductors”
MMooddeellASI-1000ASI-1200ASI-2900ASI-4100
MMooddeellASI-1000ASI-1200ASI-2900ASI-4100
MMooddeellOverallLength
Diameterof Base
Diameterof Horn
NPTBolt
CircleBase Slot Weight
ASI-1000 16.31" 7.38" 6.19" 1/2" 6.75" 0.31" 5.3 lbsASI-1200 32.12" 7.38" 7.37" 1/2" 6.75" 0.31" 8.1 lbsASI-2900 44.00" 11.16" 13.00" 1" 10.28" 0.43" 22.1 lbsASI-4100 46.50" 14.31" 14.37" 1" 13.18" 0.56" 32.3 lbs
121127703785
AAiirr CCoonnssuummeedd ((CCFFMM))
VVeennttuurrii BBlloowweerr SSppeeccii ffiiccaattiioonnss50 PSIG
TToottaall AAii rr FFllooww ((CCFFMM))935
383876
117
70 PSIGTToottaall AAii rr FFllooww ((CCFFMM))
12741429
37525041
AAiirr CCoonnssuummeedd ((CC FFMM))
3344562
AAiirr CCoonnssuummeedd ((CCFFMM))
90 PSIGTToottaall AAiirr FFllooww ((CCFFMM))
14221580
5399
152
6464
127197
53
VENTURI BLOWER SPECIFICATIONS
42
FILTER SET -UPAir passes through the first stage poly pre-fil-ter (1) and captures large particulate. The pre-filter assembly is supplied with a reusablesteel frame in which only the filter material isremoved and replaced. The standard main fil-ter (2), 99% HEPA, captures and removeseven the smallest smoke particles. If desired, athird stage filter (3) can be supplied; thisoptional third stage is a carbon filter forremoval of hydrocarbon based vapors andodors. See filters installed below.
S P E C I F I C A T I O N SMotor: 1.5 HP, 115 VAC, 1-phase, TEFC, 3450 RPMFan: 780 cfm actual (aluminum wheel and housing
assembly)Cabinet: 18 gauge steel with epoxy powder coatingDimensions: 26˝D x 26˝ W x 42˝ H (W/O arm)Wheels: (4) casters 5˝ diameter with locking featureVoltage: 115/120 pre-wired power cordAmp Draw: Start up requires 13 amps - minimum 20 amp
service is recommendedFilters: Standard with pre-filter assembly & 99% @
.3 micron HEPA filter (24x24x12)Optional Filters: 95% Filter (24x24x12) #2
65% Filter (24x24x12) #299% HEPA (24x24x9 1/2˝) Carbon Filter (24x24x2)
SetSee #’s2&3 at
left
Air Systems’ Portable FUME-AIR™ 750 is used mainlyfor source capture of welding smoke and fumes.Different filter combinations can make the PortableFume Extractor (PFE) units very versatile and costeffective for the job required. The Portable FumeExtractor series operates at less than 80dbA. A non-metallic fumehood is placed on the 360o rotatingadjustable arm and is supplied with an adjustabledamper to control air flow velocity at the capturesite. The contaminated air is drawn in through thearm or central duct; clean filtered air is exhaustedthrough the sides and bottom of the cabinet.
1
2
3
ENVIRONMENTAL CONTROL
PFE-7H
PRE-FILTER
HEPA
OPTIONALCARBON
A I R F L O W
A I R D I S C H A R G E
W E L D I N G F U M E E X T R AC TO RPORTABLE HEPA F ILTRATION
FUME-AIR ™ 750 Order ing In format ionPFE-7H Portable Extractor, FUME-AIRTM 750 complete with 7´ arm
assembly, pre-filter, and 99% HEPA, weight: 200 lbs.PFE-10H Portable Extractor, FUME-AIRTM 750 complete with 10´
arm assembly, pre-filter, and 99% HEPA, weight: 215 lbs.PFE-1CD Portable Extractor, FUME-AIRTM 750, no arm assembly,
includes pre-filter, and 99% HEPA. Unit is used forattaching a hard central duct system. Weight: 170 lbs.
ACCESSORY FILTERSPFE-2412HF HEPA filter 24” x 24” x 12”PFE-2424PF Pre-filter filter 24” x 24” x 1” (pkg. of 10)PFE-249HF HEPA filter for use with carbon filter 24” x 24” x 9.5”PFE-242C Carbon filter 24” x 24” x 2” (for use with PFE-249HF)
AIR DISCHARGE
F U M E - A I R T M 7 5 0
43
PNEUMATIC VACUUMSPneumatic powered vacuums are ideal for working in wet environmentsor where long lengths of vacuum hose are required. Air motors requireno maintenance and contain no moving parts. A built-in pressure reliefvalve restricts water lift to 160” to prevent tank collapse. An on/off flowvalve and pressure gauge are provided.
E L E C T R I C M O T O R P E R F O R M A N C E A N D V A C U U M S P E C I F I C AT I O N S
AV -2 120 VAC, 60 Hz, 1.3 HP, 2 stage by-pass, 7.5 amps, 900 watts, 94cfm, 84˝ water lif t, 2 gallon recovery, 3 gallon stainless steel tank, 30´/18-3 line cord with plug, 78dbA, 5 ft. hose supplied. Poly motor head enclosure with 2 year warranty. Includes all filters and tool kit.
AV -5 120 VAC, 60 Hz, 1.3 HP, 2 stage by-pass, 7.5 amps, 900 watts, 94cfm, 84˝ water lif t, 5 gallon recovery, 7 gallon stainless steel tank, 30´/18-3 line cord with plug, 78dbA, on/off switch, MIL SPEC water dump valve. Stainless steel motor head enclosure with 2 year warranty. Includes all filters,tool kit, handles and wheel kit.
AV -15 120 VAC, 60 Hz, 2.3 HP, 2 stage by-pass, 11 amps, 1320 watts, 115cfm, 110˝ water lif t, 15 gallon recovery, 16 gallon stainless steel tank, 30´/14-3 line cord with plug, 78dbA, on/off switch, MIL SPEC water dump valve. Stainless steel motor head enclosure with 2 year warranty.Includes all filters,tool kit, handles and wheel kit.
NOTE: Electric motors are UL, CUL, and CSA listed. Optional voltage and Hertz avail-able. Consult customer service for details.
ELECTRIC VACUUMSHazardous material vacuums are equipped with a HEPA filter system consisting ofa certified absolute filter, a double layer intermediate micro filter, and a totallyenclosed 2-ply disposable paper filter bag. The HEPA filter has a steel outer casingand micro-fibered glass paper filter media separated by corrugated aluminumsheeting that is encased in a protective steel screen. All HEPA filters are ratedwith a minimum efficiency of 99.97% at 0.3 microns. They are tested using theHOT DOP method @ 100cfm, UL 586 certified, maximum 1” resistance. ModelAV-15 motor heads are provided with a remote exhaust port for 1.5” or 2.0” hose.Vacuums are shipped with a HEPA filter, an intermediate pre-filter, a 2-ply dispos-able paper filter bag, and tool kit. The tool kit includes, 5 ft. curved steel wand,10 ft. vacuum hose with end cuffs, crevice tool, inlet swivel connector and hardfloor brush. An optional wet conversion kit converts the dry vacuum for liquidpick up.
ENVI
RONM
ENTA
L CO
NTRO
L
AV-15ELECTRIC
AV-5ELECTRIC
AV-15W/ AUTO SHUT OFFFOR WET PICKUP
INSTALLED
AV-2ELECTRIC
AV-5P AV-15P
P N E U M A T I C M O T O R P E R F O R M A N C E A N D V A C U U M S P E C I F I C A T I O N SINLET PRESSURE: 1/2˝ I.D. hose - 90 psiINLET FLOW: 70cfm requiredVACUUM PRESSURE: 250˝ water lift maximum, adjusted to 160˝ water
lift with relief valveVACUUM FLOW: 100 -170 cfm based on inlet pressureNOISE LEVEL: 75dbA @ 90psi inlet pressure
SEE PAGE 44 FOR ORDERING INFORMATION
ENVI
RONM
ENTA
L CO
NTRO
L
H E PA F I LT E R E D VAC U U M SELECTRIC AND PNEUMATIC
2 GALLON BACK PACK HEPA VACUUM• Available with 1.3 HP
electric or pneumaticmotor
• DOP tested HEPA fil-ter – 99.97% efficiency@ 0.3 micron
• Stainless steel tank, 2gallon recovery
• Flexible padded backpack frame
• Total weight, 18 lbs.with frame
• Accessory tool fittingincluded on pneumaticmodel for operatinghand tools
• Includes tools, 5 ft.hose, all filters, curvedsteel wand, andaccessory tool fitting
* 1. HEPA filter* 2. Intermediate filter (installed under
HEPA filter)3. Pneumatic motor head (fits 15
gallon and 55 gallon tank)4. Automatic water shut-off device
with extension collar* 5. 2-ply 5 micron rated paper recov-
ery bag* 6. Curved steel wand – 5 ft. (not
pictured)* 7. Hose-to-hose coupler* 8. Squeegee tool for water pick-up
9. Carpet tool* 10. Vacuum hose with end cuffs* 11. Inlet swivel connector
12. Round brush* 13. Crevice tool* 14. Hard floor brush* 15. Poly tool – adjustable roller
height squeegee tool designed topick up water from polyethylenesheeting
16. 55 gallon drum adapter – accepts15 gallon electric or pneumaticmotor head and HEPA filter
* Denotes accessories included withvacuum models AV-2 thru AV-15
44
1
2
5
4
3
710
9
8
11
12
15
16
14 13
Available inElectric
1/2˝Accessory
Tool Fitting
ENVIRONMENTAL CONTROL
Pneumatic Motor Version
VACUUM ACCESSORIES
Note: Vacuum hose can be ordered to any desired length.
Refer To Price List For Additional Vacuum Tools And Accessories
AV-3POLY
MODEL AV-3 POLY INCLUDES:1.25” telescopic wand,
floor tool, 9ft. hose, crevicetool, round brush and
two HEPA filters
ECONOMY HEPA VACUUMULTRA-QUIET HOSPITAL GRADE
1 5 . 7 ” L x 1 3 . 8 ” W x 1 5 . 7 ” H
ModelAV-2BP
H E PA F I LT E R E D VAC U U M S
HEPA Vacuum Order ing In format ionBACK-PACK ELECTRIC MODELAV -2BP 2 gallon HEPA stainless steel vacuum with back pack frameBACK-PACK PNEUMATIC MODELAV -2PBP 2 gallon, pneumatic motor, stainless steel vacuum with back
pack frameELECTRIC MODELS*AV -2 2 gallon recovery, 1.3 HP motor HEPA stainless steel tank,
complete with wand, accessory tools, and filtersAV -5 5 gallon recovery, 1.3 HP motor, stainless steel tank with floor
casters and handles, complete w/ wand, accessory tools, and filters
AV -15 15 gallon recovery, 2.3 HP motor, stainless steel tank, cart,wand, accessory tools, and filters
AV -5PTE 5 gallon recovery, 1.3 HP motor, polyethylene tank, wheels,wand, accessory tools, and filters
AV -15PTE 15 gallon recovery, 2.3 HP motor, polyethylene tank, cart,wand, accessory tools, and filters
AV -55 55 gallon drum lid assembly with HEPA filter, 1 1/2˝ hose connection, and 2.3 HP motor
PNEUMATIC MODELS*AV -2P 2 gallon recovery, pneumatic motor, stainless steel tank,
complete with wand, filters, and accessoriesAV -5P 5 gallon recovery, pneumatic motor, stainless steel tank, wand,
accessory tools, and filtersAV -15P 15 gallon recovery, pneumatic motor, stainless steel tank, cart,
wand, accessory tools, and filtersAV -55P 55 gallon drum lid assembly with HEPA filter, 1 1/2˝ hose
connection, and pneumatic motorREPLACEMENT BAGS, FILTERS AND ACCESSORIESAV -2B Paper bags - 2 gallon size - 5/pkg.AV -2H HEPA filter (99.97%) - 2 gallon size - 1/ea.AV -5B Paper bags – 5 gallon size – 5/pkg.AV -5I Intermediate filter – 5 gallon size– 2/pkg. FITS AV -2 AND
AV -5 MODELSAV -5H HEPA filter (99.97%) – 5 gallon size - 1/ea.AV -5WP 5 gallon water pick-up unit with auto shut-offAV -15B Paper bags – 15 gallon size– 5/pkg.AV -15I Intermediate filter – 15 gallon size– 2/pkg.AV -15H HEPA filter (99.97%) – 15 gallon size - 1/ea.AV -15WP 15 gallon water pick-up unit with auto shut-offAV -55DL Drum lid includes 1 1/2˝ goose neck adapter (order motor, fil-
ters, and hoses separately)
Economy HEPA Order ing In format ionAV -3POLY HEPA Vacuum completeAV -3HEX HEPA filter, exhaustAV -3HMTR HEPA filter, motorAV -3B AV -3 bags, 10/pkg.
• 1.6 HP, 110 VAC, 2-stage motor• High impact polypropylene• 98” water lift• 106 cfm air flow• 1.25” Inlet diameter• 3 gallon tank size• Bag capacity: 9 quarts/2.1
gallons• 60dBA noise level• 9 ft. hose• Dry pick up only• 33 ft. electric cord• 2 hospital grade HEPA filters for
inlet and exhaust filtration
45
UL and ASME Certified HEPA FilterAir Systems has developed two low cost disposable10 gallon recovery canisters for vacuuming haz-ardous dry or damp material. All models have astainless steel HEPA filter, DOP tested, certifiedto UL-586 and UL-900, Class 2 standards. Thefilter is manufactured to meet ASME AG-1,Section FC specifications. Flow rate, 110cfm @ 1”WG.
The canister model VCF-1415GN can be used as a satellite HEPA recovery unit placed in acontaminated environment. An external vacuum, outside the contaminated area, is usedas the vacuum source. The model VCF-1415NM has been designed to handle a remov-able air motor assembly directly attached to the top of the canister. Both units aredesigned to be disposed of after filing thus avoiding costly decontamination and DOP
1) 1.5” goose neck swivel is supplied with this model
2) 1.5” vacuum hose is connected to an external vacuum source
3) 1.5” inlet swivel connector is supplied to attach vacuum
hose, wand, and tools sold separately
4) Gasketed steel lid with DOT bolt ring
CANISTER SET -UP1
3
24
Typical Vacuum/Canister Set-up
Vacuum Canister
KIT MODEL AV5-VCFGN
MODEL VCF-1415GN
Canister Specifications:20 gauge steel 14.75” O.D.26.0” Height 26 lbs. Weight
MODEL VCF-1415NMCANISTER WITH OPTIONAL AIR
MOTOR ASSEMBLY
1
2
3
4
This canister version is designedto provide a complete HEPAvacuum with the features of adisposable canister assembly.The vacuum motor assembly(#1) is ordered separately fromthe canister unit. The vacuummotor attaches with a .75” Cam-lock coupling and can be sup-plied with an optional replace-able motor silencer (#2). Thecanister is supplied with an inletswivel connector (#3). 1.5” vac-uum hose (#4) and tools areordered separately to thedesired length. Custom designsavailable, contact CustomerService.
AIR MOTOR AND MUFFLER ASSEMBLY SOLD SEPARATELY
AIRMOTOR
MODEL VCM-120 MOTORMODEL VCM-120M MUFFLER
OPTIONAL AIRMUFFLER
Air consumption (cfm) @ 80psi inlet:
44cfm/15” Hg63cfm/20” Hg90cfm/25” Hg
Applications• Nuclear contamination• Biomedical waste• Bacteriological waste• Drug residue collection• Chemical waste
collection• Any hazardous
particulate waste that must be disposed or collected
Vacuum Flow (cfm) @ 80psi inlet:
70cfm/15” Hg87cfm/20” Hg120cfm/25” Hg
AIR MOTOR SPECIFICATIONS:
VACUUM CANISTER WITH AIR MOTOR
D I S P O S A B L E VAC U U M C A N I S T E RFOR HAZARDOUS MATERIAL RECLAMATION
Disposab le Vacuum Order ing In format ionCANISTERSVCF-1415GN Vacuum canister only. Includes inlet swivel, and goose neck adapter, order hose separatelyVCF-1415NM Vacuum canister with .75” male CAM-LOCK air inlet for air motor connectionVCM-120 Air motor assembly, no mufflerVCM-120M Muffler assemblyCANISTER VACUUM KIT AV5-VCFGN Vacuum canister kit with 5 gallon HEPA vacuum and 1 each vacuum canister VCF-1415GN .
Oder desired hose and tools separatelyACCESSORIESAV -H10 1.5” Vacuum hose, 10ft., with cuffsAV -H50 1.5” Vacuum hose, 50ft., with cuffsAV -HC-1 1.5” x 1.5” hose to hose coupler, metalAV -100 2-piece curved steel wand - 1.5” O.D., 54”LAV -6200 14” floor brush - 1.5” O.D.
Vacuum Flow
CUSTOM OPTIONSAVAILABLE
UPON REQUEST
ENVI
RONM
ENTA
L CO
NTRO
LEN
VIRO
NMEN
TAL
CONT
ROL
46
KOOL-VEST™
S P E C I F I C A T I O N S• Double coated PVC on nylon scrimmaterial with velcro front closures andsewn-in adjustable belt
• Small holes on interior of vest direct airto the entire upper torso, front and rear
• Specially designed plenum directs air toa neck ring for cool air distribution tothe neck and face. A rear velcro stripcontrols the air volume to the neck ring
• The KOOL-VESTTM, KV-99NR, is sup-plied without an airline or vortex tubeadapter. Order the vortex adapter orAir Systems’ unique Cool-BoxTM for addi-tional body cooling – see Cool-BoxTM oncatalog page 17 for details
• Meets thermal and flame resistancetests 191 and 5903
KV-99NR
Optional Vortex AdapterMODEL 99-4X
REDUCES
HEAT
STRESS
INCREASESWORKERPRODUCTIVITY
B O DY C O O L I N G AIRLINE COOLING VESTS
Optional Airline Adapter for Direct Airline Attachment to Connect to our Cool-Box™ or a Breather Box™
Airline adapters are available in two sizes:- Model KV-99AA25 supplied with 1/4˝ Hansen plug- Model KV-99AA50 supplied with 1/2˝ Hansen plug
KOOL VEST TM Order ing In format ionKV -99NR KOOL -VESTTM airline model (add either a
vortex tube or straight airline adapter)99-4X Vortex tube assembly for KV -99NR
KOOL -VESTTM
KV -99AA25 Airline Adapter for KOOL -VESTTM with 1/4” Hansen plug
KV -99AA50 Airline Adapter for KOOL -VESTTM with 1/2” Hansen plug ENVIRONM
ENTAL CONTROL
The KOOL-VESTTM has been designed for increased workerproductivity and reduce heat stress to improve workersafety. Fresh air is distributed through small holes in thevest to provide evaporative cooling across the worker’sback, chest, and face. The vest operates with only 10-20psi and will accommodate a vortex cooling tube, AirSystems’ Cool-BoxTM or straight airline hose as picturedbelow.
Manufactured In The U.S.A By:AIR SYSTEMS INTERNATIONAL, INC.
829 Juniper CrescentChesapeake, Virginia 23320
CALL TOLL FREEU.S.A. AND CANADA:
1-800-866-8100(757) 424-3967
FAX NO. 1-800-247-5850(757) 424-5348
CUSTOMER COMMITMENTAir Systems International is totally committed to our customers’
needs and special job requirements. We have always taken
great pride in being responsive to the environmental concerns of
our equipment users. The products that we manufacture have
been developed out of a specific need or desire to perform work
more safely and with greater productivity. We will always
continue to respond to the demands and innovative ideas of our
most valued asset – the customer.
DAVID F. ANGELICO, PRESIDENT
Customer Service1-800-866-8100 or
757-424-3967
$2.00 U.S Copyright 2005 All Rights Reserved CAT001 REV. 0
Leading the Industry in Breathing Air Filtration &Confined Space Equipment Since 1986
Visit us Online atwww.airsystems.com
Distributed By:
AIR SYSTEMS INTERNATIONALREGISTERED TO ISO 9001CERTIFICATE NO. A5033