agga4-evks - elecnor deimos. agga-4 evalkit support (agga4-evks) package is a commercial tool...
TRANSCRIPT
AGGA4-EVKS
AGGA-4 EvalKit Support Package
Originally Developed for ESA
Ronda de Poniente 19
Tres Cantos, Madrid, Spain
+34 91 806 34 50
www.elecnor-deimos.com
@ElecnorDeimos
Key Benefits
• Able to run a set of GNSS dataset examples in AGGA-4 Evalkit
• Reduces the initial effort to start working with GNSS signals in AGGA-4
• Provides initial source code drivers for more complex project developments
The AGGA-4 EvalKit Support (AGGA4-EVKS) package is a commercial tool composed by pre-recorded GNSS datasets and basic GNSS software for the AGGA-4 EvalKit. The main goal ofthe AGGA4EVKS package is to provide the software baseline for EvalKit in the final userperspective, allowing the demonstration of the essential functionalities of EvalKit.
Main Features
Verification of the main hardware for the
following AGGA-4 EvalKit components:
• Low-level components (input modules, code
delay line, integrator, etc).
• Higher-level modules (final down converter,
code generator unit, a complete GNSS
channel, etc).
Software drivers for:
• Integration of the high level components
and AGGA-4 as a whole (as the acquisition
and tracking tests).
• Supporting the debug of AGGA-4
functionalities.
Deliverables
• Compilation and documentation of a
library of GNSS test signals (GNSS
dataset), including examples of Galileo
E1, Galileo E5a, GPS L1 and GPS L5.
• AGGA-4 basic firmware, supporting
acquisition and tracking of signals from the
GNSS dataset.
• User manual, describing all the steps to
perform the AGGA-4 EvalKit tests,
including:
Loading software examples.
Performing any required
configuration.
Setting up the injection of
signals included in the provided
GNSS Dataset.
Verifying that both the EvalKit
and the software are working by
analysing the test outputs using
MATLAB scripts.
• Ideally suited for use with the SSG
tool (acquired separately) to generate
additional GNSS signals.
Simple Signal Generator (SSG)
If the user intends to generate additional
signals besides the ones included in
AGGA4EVKS, the SSG tool can be acquired
separately.
Elecnor Deimos Simple Signal Generator tool runs
on a computer allowing the end-user to create
I&Q components of GNSS signals with specific
Doppler, signal strength, navigation data bits,
etc.