adrian_popescu_cv_
TRANSCRIPT
Curriculum Vitae
Adrian Popescu
Senior Project Engineer / Project Manager(Graduated Mechanical Engineer)
DOB 7th June 1967Mobile: +65-81237972
Email: [email protected]: British
A highly skilled and experienced Senior Project Engineer / Project Manager with a proven track record for successfully completing complex and innovative Oil & Gas and Marine projects. A degree qualified mechanical engineer, Adrian has extensive experience on mechanical engineering (drilling and subsea handling systems, marine equipment), shipbuilding, technical management, project risk management and coatings / corrosion.He also, has extensive knowledge of project definition and planning – development of WBS, CBS and high-level scopes of work, procurement plans, schedules.
Work experience:
March 2006 –January 2015 Epeus Group of Companies – UK & International Oil & Gas Projects Consultant
Responsible for worldwide projects including oil & gas, marine. Adrian is involved in planning and executing projects, identifying and mitigating risks to project success and managing multi-discipline engineering, project and commissioning teams.
Last Project :
ENSCO5006 (ENSCO Plc Singapore / Client INPEX) – Semi-submersible upgrade and repairs. Location: KFELS Singapore.
Position: Project Engineering Manager
Project Duration: March 2013 – January 2015
I was in charge of a team of discipline engineers during the planning and engineering phase, followed up by installation, commissioning and start-up of major new equipment installed, such as:
165MT NOV AHC knuckle-boom crane
BOP Crane & BOP Transporter - Aker / MHwirth
BOP / LMRP Stack - Cameron
Xtree Crane & XTree Transporter – Aker / MHwirth
Riser Gantry Crane & Riser Skate – Aker / MHwirth
Shale shakers - Axiom
3rd Party Mud Processing System - Step Oiltools
Accommodation upgrade
Helideck & Refuelling system upgrade
SPS of the existing drilling equipment – NOV
Also renewal of 1000 MT of steelwork
Curriculum Vitae
Past Projects
COSL BOSS (COSL Drilling Singapore / Client BP) – Jack-up upgrade and repairs
Position: Rig Delivery Manager. Location: Jurong Shipyard Singapore
Project Duration: August 2012 – February 2013
Atwood Osprey & Atwood Condor (Atwood Oceanics @ Jurong Shipyard Singapore) – New-build Semi Submersible drilling rigs – Design, Construction, Commissioning & Delivery. Location: Jurong Shipyard Singapore.
Position: Senior Project Engineer & Document Control Manager
Project Duration: August 2008 – July 2012
Al-Baraka (KCAD) Repair and Upgrade – Drilling Tender Barge.
Position: Project Manager.
Project Duration: April 2008 – July 2008
Searex X (KCAD) Repair and Upgrade – Drilling Tender Barge.
Position: Project Manager.
Project Duration: January 2008 – March 2008
Noble Roy Butler (Noble Drilling) – Jack-up. Structural repairs and upgrades – Definition and Planning.
Position: Project Technical Manager
Project Duration: April 2007 – December 2007
Talisman AUK Platform Upgrade (Talisman Drilling) – BOD Review.
Position: Risk Management Engineer.
Project Duration: November 2006 – March 2007
MG Hulme (TOI) – Semi Submersible Drilling Rig.
Position: Senior Mechanical Engineer.
Project Duration: June 2006 – October 2006
Searex VI (Frazimex Nigeria) Drilling Tender Barge. Position: Senior Mechanical Engineer.
Project Duration: April 2006 – May 2006
Sep 1999 – Mar 2006 W & J Leigh & Co. - Bolton, UK Project Manager / Senior Project Engineer (Marine, Oil, Gas & Chemical)
Responsible for UK and worldwide projects including marine, oil & gas, petro-chem. This involved technical supervision of the project teams involved in the scope of work development, budget preparation and scheduling, followed by management of the execution and close-out phases of the projects.
Curriculum Vitae
Projects: HMS Bulwark, HMS Albion, RFA Wave Knight, RFA Wave Ruler, RFA Mounts Bay, RFA Cardigan Bay, HMS Ark Royal, HMS Illustrious, HMS Richmond, HMS Portland
1998-1999 W & J Leigh & Co – Bolton, UKSenior Technical Representative
Being responsible for inspections and writing specifications for the Marine Sector (MOD and Commercial) and Oil/Gas & Chemical.
Projects: P&O Stena Line Ferries, P& O Scottish Ferries dry-dockings.
1993 – 1998 W & J Leigh & Co - RomaniaProject Manager Eastern Europe
Based in Constanta Shipyard – Romania as a Project Manager for building of 3 bulk-carriers (175,000 dwt) for CMB Bocimar. In charge of a team of 5 inspectors. Being responsible for structural steel/welding, surface preparation and coatings inspections, computerized project & stock management.
Projects: m/v Mineral Ordaz, m/v Mineral Sakura, m/v Poterne
1991 – 1993 Petromin S.A., Romania
Assistant of Fleet Maintenance Superintendent
Petromin is one of the most important state owned shipping companies in Romania. It has a fleet of 37 ships - bulkers and tankers. Responsible of fleet maintenance and dry-dockings.
Education:
2000 - 2002 Open University - Diploma in Computing1995 -1997 Ovidius University - IT Course - Database Management.1986 -1991 Technical University of Constructions – Degree in Mechanical Engineering
Certifications:
Certified Project Risk Engineer - Pertmaster Certified CSWIP Welding Inspector – TWI Certified NACE Cathodic Protection Technician Certified NACE Coating Inspector. BOSIET
References:
Wil van Oorschot - Senior Project Manager ENSCO plcemail: [email protected]: +65- 98215614
Asim Bashir - VP Operations COSL Drillingemail: [email protected]: +65-96232810