adornments

WR2:14

800-558-0119www.mouldings.com

CRV5500Large Acanthus Capital

4 5/8" x 4 3/4" x 2 3/8"accepts up to 2" x 1"

sold 2/pkg.

CRV5502Medium Acanthus Capital

3 1/2" x 3 5/8" x 1 3/4"accepts up to 1 1/2" x 3/4"

sold 2/pkg.

CRV5504Small Acanthus Capital

2 3/8" x 2 3/8" x 1 1/8"accepts up to 1" x 1/2"

sold 2/pkg.

CRV5506Large Papyrus Leaves Capital

3 1/2" x 4 3/4" x 1 3/4"accepts up to 2" x 1"

sold 2/pkg.

CRV5508Medium Papyrus Leaves Capital

2 5/8" x 3 5/8" x 1 3/8"accepts up to 1 1/2" x 3/4"

sold 2/pkg.

CRV5510Small Papyrus Leaves Capital

1 3/4" x 2 3/8" x 7/8"accepts up to 1" x 1/2"

sold 2/pkg.

CRV5512Large Traditional Capital

3 1/2" x 4 3/4" x 1 3/4"accepts up to 2" x 1"

sold 2/pkg.

CRV5514Medium Traditional Capital

2 5/8" x 3 5/8" x 1 3/8"accepts up to 1 1/2" x 3/4"

sold 2/pkg.

CRV5516Small Traditional Capital

1 3/4" x 2 3/8" x 7/8"accepts up to 1" x 1/2"

sold 2/pkg.

Carved and Turned CapitalsMaple & Cherry • In-Stock

3 1/2"

2 5/8"

3 1/2"

1 3/4"

2 5/8"

3 1/2"

1 3/4"

2 3/8"

4 5/8"

2 3/8"

1 3/4"

1 3/4"

1 3/8"

1 1/8"

7/8" 7/8"

1 3/8"

1 3/4"

4 3/4"

4 3/4"

3 5/8"

3 5/8"

2 3/8"

2 3/8"

CRV5500

CRV5506

CRV5502

CRV5508

CRV5504

CRV5510 CRV5516

Acanthus CapitalRope Lineal

Plynth

Papyrus CapitalReeded Lineal

Plynth

CRV5514

CRV5512

Dimensions are listed in orderby width at widest point,overall height and depth.

Adornments forCabinetry & Furniture™

End Blocks, Splicers & PlynthsMaple & Cherry • In-Stock

WR2:15

800-558-0119 ~ www.mouldings.com

CRV5518Large End Block

3 1/2" x 5 3/4" x 1 3/4"accepts up to 3 1/2" x 1 3/4"

Accepts Large Capitalssold 2/pkg.

CRV5520Medium End Block2 5/8" x 5 3/4" x 1 3/8"

accepts up to 2 5/8" x 1 3/8"Accepts Medium Capitals

sold 2/pkg.

CRV5522Small End Block

1 3/4" x 5 3/4" x 7/8"accepts up to 1 3/4" x 7/8"

Accepts Small Capitalssold 2/pkg.

2 5/8" 1 3/4"3 1/2"

CRV5524Large Splicer

3" x 3 1/4" x 1 1/2"accepts up to 2" x 1"

sold 2/pkg.

CRV5526Medium Splicer

2 1/4" x 2 3/8" x 1 1/8"accepts up to 1 1/2" x 3/4"

sold 2/pkg.

CRV5528Small Splicer

1 1/2" x 1 5/8" x 3/4"accepts up to 1" x 1/2"

sold 2/pkg.

CRV5530Large Traditional Plynth

3 3/4" x 2 3/8" x 1 7/8"accepts up to 2" x 1"

sold 2/pkg.

CRV5532Medium Traditional Plynth

2 3/4" x 1 3/4" x 1 3/8"accepts up to 1 1/2" x 3/4"

sold 2/pkg.

CRV5534Small Traditional Plynth

1 7/8" x 1 1/8" x 1"accepts up to 1" x 1/2"

sold 2/pkg.

2 1/4"

3"

1 1/2"

1 7/8"3 3/4" 2 3/4"

1 3/4"

End blocks areshown with

various capitalsbeing accepted

to base.

1 3/8"

1 1/2"

1 1/8"

1 7/8"

1 3/8"

3 3/4"

2 3/8"

3/4"

1 5/8"

3 1/4"

7/8"

5 3/4"

5 3/4"

CRV5518

CRV5520

CRV5524

CRV5526

CRV5530

CRV5532 CRV5534

CRV5528

CRV5522

End Block,Papyrus Capital,Reeded Lineal,

Splicer

End Block,Acanthus Capital,

Rope Lineal, Splicer

1"

2 3/4" 1 7/8"

Products on pages 2:14 - 2:17 are designed so that all large items fit each other,medium fits medium and small fits small.


WR2:16


CRV5536Large Acanthus Finial2 3/8" x 4 1/4" x 1 1/4"

accepts up to 2" x 1"sold 2/pkg.

CRV5538Medium Acanthus Finial

1 3/4" x 3 1/8" x 7/8"accepts up to 1 1/2" x 3/4"

sold 2/pkg.

CRV5540Small Acanthus Finial

1 1/4" x 2 1/8" x 5/8"accepts up to 1" x 1/2"

sold 2/pkg.

CRV5542Large Traditional Finial

2 3/8" x 4 1/4" x 1 1/4"accepts up to 2" x 1"

sold 2/pkg.

CRV5544Medium Traditional Finial

1 3/4" x 3 1/8" x 7/8"accepts up to 1 1/2" x 3/4"

sold 2/pkg.

CRV5546Small Traditional Finial

1 1/4" x 2 1/8" x 5/8"accepts up to 1" x 1/2"

sold 2/pkg.

Split FinialsMaple & Cherry • In-Stock

1 3/4""

1 3/4"

2 3/8"

1 1/4"

1 1/4""

2 3/8"1 1/4"

7/8"

5/8" 5/8"

2 1/8"

7/8"

3 1/8"

1 1/4"

4 1/4"

CRV5536

CRV5538

CRV5540

Robust Finial

MLD5924CRV5544

MLD 5822

MLD5864CRV5538MLD6000

MLD6024, PM485MLD5812, CRV5079

MLD5842CRV5544MLD6024MLD5972MLD5822

MLD5860, MLD5900,CRV5518, CRV5512

CRV5542

CRV5546

CRV5544

CRV5542

Great Design Ideas


Half Round LinealsMaple & Cherry • In-Stock

WR2:17

MLD5800Lg. Rope Half Lineal

2" x 1" x 96"

MLD5802Med. Rope Half Lineal

1 1/2" x 3/4" x 96"

MLD5804Sm. Rope Half Lineal

1" x 1/2" x 96"

MLD5820Lg. Traditional Half Lineal

2" x 1" x 96"

All Large Lineals fitLg. Capitals, Plynths & Splicers

All Medium Lineals fitMed. Capitals, Plynths & Splicers

All Small Lineals fitSm. Capitals, Plynths & Splicers

MLD5822Med. Traditional Half Lineal

1 1/2" x 3/4" x 96"

MLD5824Sm. Traditional Half Lineal

1" x 1/2" x 96"

MLD5810Lg. Reeded Half Lineal

2" x 1" x 96"

MLD5812Med. Reeded Half Lineal

1 1/2" x 3/4" x 96"

MLD5814Sm. Reeded Half Lineal

1" x 1/2" x 96"

For AdditionalRope sizes see

page 2:38MLD5868, MLD5958,CRV5604, MLD6020,CRV5508, MLD5802

MLD5864, MLD6002,MLD5840, CRV5502,

MLD5812

MLD5868, MLD5982,CRV5512, MLD5820

MLD5840, MLD5903,MLD6022, CRV5510,

MLD5814


WR2:18


CRV5130Medium Corinthian Capital

8" x 8" x 1 3/4"accepts up to 1 1/4" x 5 1/8"

CRV5133Small Corinthian Capital

6" x 6" x 1 3/8"accepts up to 7/8" x 4"

CRV5136Petite Corinthian Capital

3 1/4" x 3 1/4" x 1 1/4"accepts up to 7/8" x 2"

CRV5148Medium Plynth

7 1/4" x 3 1/2" x 2 1/2"accepts up to 1 1/4" x 5 1/8"

CRV5149Small Plynth

6 1/4" x 3" x 1 7/8"accepts up to 7/8" x 4"

CRV5150Petite Plynth

2 7/8" x 1 1/2" x 1 3/8"accepts up to 2" x 7/8"

sold 2/card

CRV5574Sm. Acanthus Spool Corbel

2 5/8" x 3 3/4" x 3/4"Complements Med. Capitals and

3 1/2" Friezes - sold 2/card

CRV5576Lg. Acanthus Leaf3 1/2" x 4 1/2" x 3/4"

sold 2/card

CRV5578Med. Acanthus Leaf

2 1/2" x 3" x 1/2"sold 2/card

Capitals, Plynths & Acanthus ElementsMaple & Cherry • In-Stock

CRV5568X-Lg. Acanthus Spool Corbel

3 3/8" x 5 1/2" x 1 1/8"Complements Lg. Capitals and 5 1/4" Friezes

sold 2/card

CRV5572Med. Acanthus Spool Corbel

2 5/8" x 5 1/2" x 1 1/8"Complements Med. Capitals and

5 1/4" Friezes - sold 2/card

3 3/8"

2 5/8"

3 3/8"

2 5/8"


CRV5570Lg. Acanthus Spool Corbel

3 3/8" x 3 3/4" x 3/4"Complements Lg. Capitals and 3 1/2" Friezes

sold 2/card

MLD5918, CRV5136,MLD5810, MLD5844,MLD6020, CRV5150,MLD5986, MLD6030

MLD5842, MLD5914,CRV5570, MLD6022,CRV5502, MLD5812

MLD5842, MLD6020,MLD5962, CRV5574,MLD6020, MLD5802

Slight variations occur duringthe hand carving process.

For additional Capitals and Plynths inLindenwood see page 2:12.


Capitals, Lineals, Buttons & RosettesMaple & Cherry • In-Stock

CRV5580Large Traditional Capital

5 1/4" x 6 3/4" x 1 1/4"accepts up to 4 1/4" x 3/4"

CRV5582Medium Traditional Capital

4" x 5 1/4" x 1 1/8"accepts up to 3" x 3/4"

MLD5830Large Reversible Pilaster

4 1/4" x 3/4" x 96"

MLD5832Medium Reversible Pilaster

3" x 3/4" x 96"

CRV5588Small Classic Button1 1/4" x 1 1/4" x 3/8"

sold 8/card

WR2:19


CRV5584Large Classic Button3 1/2" x 3 1/2" x 5/8"

sold 4/card

CRV5586Medium Classic Button

2 1/4" x 2 1/4" x 1/2"sold 4/card

ClassicButtons

Capitals with Reversible Lineals

CRV5160 Lg. Square Rosette

5" x 5" x 5/8"sold 2/card

CRV5164Med. Square Rosette3 1/2" x 3 1/2" x 3/8"

sold 2/card

CRV5178Med. Oval Rosette

3 1/2" x 5" x 3/4"sold 2/card

CRV5179Sm. Oval Rosette2 3/4" x 4" x 5/8"

sold 2/card

CRV5168Lg Round Rosette

5" dia. x 3/4"sold 2/card

CRV5169Med Round Rosette

3 1/2" dia. x 5/8"sold 2/card

MLD5868, CRV5582,MLD5832, CRV5618

MLD5840, CRV5580,MLD5830, CRV5179

CRV5580 withapplied carving

CRV5164 CRV5586

CRV5614CRV5620

CRV5576

CRV5584

CRV5578, CRV5586, CRV5596,CRV5588, CRV5187

CRV5169

CRV5582 withapplied carving


WR2:20


CRV5604Medium Scrolled Corbel

3" x 5 1/2" x 1 3/4"sold 2/card

CRV5606Small Scrolled Corbel

2" x 3 3/4" x 1 1/4"sold 4/card

CRV5608Petite Scrolled Corbel

1 1/2" x 2 3/4" x 7/8"sold 4/card

CRV5610Small Imbricated Corbel

1" x 5 1/2" x 1"sold 4/card

CRV5612Petite Imbricated Corbel

1" x 4" x 1"sold 4/card

Petite Corbels & RosettesMaple & Cherry • In-Stock

CRV5592Large Acanthus Rosette

4 1/2" dia. x 1 5/8"

CRV5594Med. Acanthus Rosette

3 1/2" dia. x 1 3/8"sold 2/card

CRV5596Small Acanthus Rosette

2 1/2" dia. x 7/8"sold 2/card

Rosettes have sculpted profile,may also be used as door pulls.

CRV5590X-Large Acanthus Rosette

5 1/2" dia. x 1 3/4"CRV5596

MLD5860, CRV5610, MLD5979,MLD5968

MLD5848, CRV5604, MLD6020,CRV5514, MLD5822

MLD5860, MLD5979, CRV5612,MLD5022, MLD5948, MLD6030

For additional small onlays inLindenwood see page 2:13

Dimensions are listedin order by width atwidest point, overall

height and depth.

ELEGANT CABINETRY - CRV5514, MLD5812, PM8535,FT6293, CRV5036


Rosettes & BracketsMaple & Cherry • In-Stock

11"

WR2:21


CRV5614Rosette Plate

3 3/4" dia. x 5/8"accepts up to 2 3/4" dia. x 3/4"

sold 2/card

CRV5616Reeded

Radius PanelMould

3/4" x 3 3/4" x 3/8"sold 4/card

CRV5618Flower Rosette2 3/4" dia. x 3/4"

fits Rosette Plate CRV5614sold 4/card

Drawing of center panel above shows MLD5616, CRV5616,CRV5614 and CRV5618

CRV5616 can be jobsite cutto create a radius corner

CRV5620Acanthus Rosette

2 3/4" dia. x 3/4"fits Rosette Plate CRV5614

sold 4/card

CRV5624Medium Wall Bracket

1" x 6" x 5 1/2"

CRV5626Wall Cabinet Support

3" x 2" x 15"

CRV5622Large Wall Bracket

1 1/2" x 12" x 11"

5 1/2"

15"

MLD5860, MLD6022, MLD5616,CRV5616, CRV5614, CRV5618,

MLD5962

CRV5624, MLD5949

MLD5868, MLD5616, CRV5616,CRV5620, MLD5916

MLD5942, CRV5626

MLD5616Reeded Panel Mould

3/4" x 1/2" x 96"fits Reeded Radius Panel Mould

SIMPLE SHELF - PM8523, CRV5624,CM8820, MLD5616


WR2:22


CRV5628Papyrus Leaves and Urn

10 3/4" x 5" x 7/8"

CRV5632Fruit Swag

11" x 5" x 7/8"

CRV5634 Continuous Scrolls7" x 3" x 3/4"

sold 4/card - 2 left and right pair

Carved Centers and ScrollsMaple & Cherry • In-Stock

CRV5047Acanthus Center with Scrolls

20" x 5" x 3/4"

CRV5049Small Acanthus with Scrolls

12" x 4" x 5/8"

CRV5046Large Acanthus with Scrolls

36" x 7 1/2" x 7/8"

CRV5048Medium Acanthus with Scrolls

24" x 6" x 3/4"

MLD5842, MLD5978, CRV5628,CRV5634, MLD6022, MLD5968

MLD5868, CRV5632, CRV5642

MLD5868, MLD5924, CRV5635,MLD6024, CRV5107

CRV5618, CRV5048

CRV5630Woven Fruit Basket with Scrolls

20" x 5" x 3/4"

CRV5635Ribbon and Wheat

13" x 2" x 1/2"

Continuous Scrolldesign application ideas.


Vineyard Motifs & ScrollsMaple & Cherry • In-Stock

CRV5034Small Pull

4 1/2" x 1 7/8" x 1 1/4"sold 2/card

CRV5038Grapevine Medallion

6" x 14 1/4" x 1"

CRV5036Vineyard Knobs

1 1/2" Dia. x 1 5/16" sold 4/card

CRV5067Large Floral Scrolls, left and right

11" x 5 1/2" x 13/16"sold left and right pair / card

CRV5068Medium Floral Scrolls, left and right


WR2:23


CRV5020Large Cluster with Scrolls

36" x 7" x 7/8"

CRV5066Medium Scrolls, left and right


CRV5032Large Pull

12" x 3 3/4" x 1 1/2"

MLD5848, CRV5173,MLD5916, CRV5068

CRV5032

CRV5036

CRV5034

Slight variations occur duringthe hand carving process.


CRV5022Medium Cluster with Scrolls

24" x 4 1/2" x 3/4"


ELEGANT CABINETRY -CM8810, CR5020

WR2:24


CRV5642Acanthus Plume


Drops & CornersMaple & Cherry • In-Stock

CRV5640Acanthus Drop2" x 8 3/4" x 1/2"2 pieces-sold 2/card

CRV5075Small Plume Corner


CRV5638Petite Drop

1 7/8" x 7 1/2" x 1/2"sold 2/card

CRV5636Ribbon Drop

2 1/4" x 9" x 1/2"sold 2/card

CRV5636combined with

CRV5638overall drop

16 1/2"

Clipped CornersCRV5079 acceptsPM74, PM485,PM494 to formdelicatedecorative panels

MLD5976, CRV5642, MLD6020,CRV5596, MLD5970, MLD5976,

FT6294

MLD5864, MLD5916, MLD6022,CRV5640, MLD5972

CRV5638, CRV5079, MLD5616,FT6290


CRV5644Rosette Flower Drop

2 3/4" x 12" x 5/8"sold 2/card


STAINED

POPLAR WITH

LINDENWOOD

AND MAPLE -CM8860,CRV5079,PM485

GOLD LEAFED -PM8535

CRV5079Clipped Scroll Corners

4 1/4" x 4 1/4" x 5/8"sold 4/card 2 left-2 right

WR2:25

Metalwood™ FinishesReal Metal Finishes by Special Order

W hite River™ now offers 7 Fabulous Finishes in METALWOOD™ for all of our beautiful hardwood mouldings and woodcarvings. METALWOOD™ is a real-metal finish

that provides the authentic look and feel of metal for cabinetry, furniture, mantels and otherimportant focal points.

METALWOOD™ finishes are especially well suited to our Mon Reale® mouldings and our AuthenticHand-Carved® Woodcarvings. No special tools are required for installation. Ordering is easy:1) Select any White River™ hardwood moulding or woodcarving, 2) Choose the metal finish ofyour choice, 3) Enjoy the beauty of METALWOOD™ - enhanced White River™ products.

The glimmer of hand-polished nickel presents a beautiful contrast to dark spaces.

A silver-white metal that is cool, contemporary and strong.

NICKEL

ALUMINUM

There is no substitute for the warm and subtle glow of this beautiful hand-polished metal.

A timeless classic metal that has endured unlike any other. Hand-rubbed to reveal subtlevariations in the metal and to accent natural shadows.

BRO N Z E

COPPER PATINA

COPPER

Patina complements the subtle glow of copper, giving it a pale-green, naturally aged andweathered look and creating character and Old-World charm.

IN S TA L L AT I O NLay out all products to determine the best possible cuts for ease ofinstallation; consider pattern repeats to achieve the best yield fromthe product.

To hide nail holes, place nails in discreet areas of the surface. UseMinwax Blendfil pencil No. 8 to fill nail holes for Brass, Bronze andNickel finishes. For Copper finishes, use Minwax Blendfil pencil No. 5.

All METALWOOD™ finishes (except Iron Rust) are finished with a waxtopcoat, which can be dusted with a soft cloth and periodicallypolished with a no-wax formula such as Pledge®.

METALWOOD™ products install with standard woodworking tools.Exercise caution when installing with pneumatic nail guns.

A fine, high-quality metal with a deep, penetrating shine.Hand-polished to show the value of time.

ANTIQUE BRASS

The strength of this great metal adds instant history and character to any surface.This finish will continue to rust naturally.

IRON RUST

THE PROCESSW hite River™ hardwood mouldings and woodcarvings are first prepared to accept themetal coating and to ensure complete adhesion to the surface. The METALWOOD™ finish, which is95 percent real metal, is applied by hand using a cold-spray process, then convection cured at atemperature range of 86 to 91 degrees.

After the finish is cured, the polishing process begins with sand blasting. If the patina finish hasbeen ordered, it is applied by hand at this time. A master polisher then hand polishes each pieceto bring out the highlights. Because METALWOOD™ is real metal that will age and weather, thesurface is topcoat sealed for protection and to stop the aging process. METALWOOD™ productsinstall with standard woodworking tools, and touch-up kit information is available.

Our price list currently reflects Metalwood™ on Mon Reale® Mouldings,Authentic Hand-Carved® Woodcarvings and plaster medallions.

LONG-LASTING - Real metal compoundthat is non-corrosive and easy tomaintainDURABLE - Will not shrink, fade,crack, chip or peelLIGHTWEIGHT - Adds less than fourounces per square foot with standard10-mil applicationSTRONG - Can withstand 1,500 PSIbefore pulling away from basematerialHEAT-RESISTANT - Class A, Class 1material that will not support a flameNON-CONDUCTIVE - Does not conductelectricity

Bronze

Copper

Copper Patina

Antique Brass

Nickel

Iron Rust

Aluminum



WR2:26


CRV5120Large Acanthus with

Shell Corbel6" x 14" x 2 1/2"

CRV5121Medium Acanthus with

Shell Corbel4 1/2" x 10" x 1 3/4"

CRV5097Large Acanthus Corbel

7 7/8" x 14 1/2" x 6"

CRV5098Medium Acanthus Corbel

5" x 12" x 4 1/2"

CRV5100Acanthus Grapevine Corbel

3 1/2" x 13" x 8"

CRV5112Medium Grapevine Tassel Corbel

4 3/4" x 10" x 5 1/4"

Acanthus & Vineyard CorbelsMaple & Cherry • In-Stock

Great Mantel and Range hood Ideas

CRV5119X-Large Acanthus Corbel

7" x 22" x 3 1/4"

CRV5110Large Grapevine Tassel Corbel

5 1/2" x 15" x 7"

MAN9035LW, CRV5097

MLD5844, MLD5900, CRV5098

MLD5848, MLD5916, CRV5112

MLD5860, MLD5914, CRV5121



CORBEL - CRV5110

Classic CorbelsMaple & Cherry • In-Stock

WR2:27

CRV5250Classic Corbel

5" x 11" x 3"

CRV5253Classic Corbel7" x 14" x 3 1/2"


5 1/4" x 12 1/2" x 4 1/2"


3 3/4" x 6 1/2" x 3 1/2"

CRV5125Petite Acanthus Corbel

3" x 4 1/4" x 1 3/4"

CRV5126Petite Corbel

3" x 4 1/4" x 1 3/4"


3 1/2" x 12" x 7 1/2"

CRV5259Classic Corbel7" x 9" x 5 1/2"

MLD5868, RH6080, CRV5259

MLD5840, RH6082,MLD5942, CRV5105

RH6078, MLD5922, CRV5107

Great Mantel and Range hood Ideas

CRV5257X-Large Classic Corbel

7" x 22" x 3 1/4"



CM8810, CM8820, CRV5100, CRV5121

WR2:28


Crown MouldingsMaple & Cherry • 8 Foot Lengths In-Stock

MLD5840 Large Acanthus Crown4 3/4" x 13/16" x 96" - Repeats 3 1/2"

MLD5842 Medium Acanthus Crown3 1/2" x 13/16" x 96" - Repeats 2 1/2"

MLD5844 Small Acanthus Crown2 1/2" x 13/16" x 96" - Repeats 1 3/4"

MLD5846 Medium Egg and Dart Crown3" x 13/16" x 96" - Repeats 2 3/4"

MLD5848 Large Egg and Dart Crown4 3/4" x 13/16" x 96" - Repeats 1 3/4"

3"

3 3/

4"

2 1/4"

2 3/

4"1 5/8"

1 7/

8"

2"2

1/4"

3"

3 3/

4"

Repeats and carvings may vary slightly due to the nature of the hand carving process.

Lineals are priced per lineal foot and soldindividually as 8’ lengths. Lineals are packaged

4 per bundle - any order over 8 pieces mayinclude 2 pieces that equal up to 8’.


Crown MouldingsMaple & Cherry • 8 Foot Lengths In-Stock

WR2:29


MLD5860 Medium Fluted Crown3 1/2" x 13/16" x 96" - Repeats 2"

MLD5864 Large Traditional Cove Crown 3 1/2" x 13/16" x 96"Accepts insert panel moulds located on page 2:36, drawings page 2:37.

MLD5866 Medium Traditional Cove Crown 2 1/2" x 13/16" x 96"Accepts insert panel moulds located on page 2:36, drawings page 2:37.

MLD5868 Traditional Crown3 1/2" x 13/16" x 96"

2 1/4"

2 3/

4"

2 3/8"

2 5/

8"

1 5/8"

1 7/

8"

2 1/4"

2 3/

4"

MLD5869 Traditional Crown2 1/2" x 11/16" x 96"

1 5/8"

2"

MLD5866 with insert MLD6002

MLD5864 with insert MLD6002 Typical Fit


WR2:30


Ornate FriezesMaple & Cherry • 8 Foot Lengths In-Stock

MLD5903Running Palmette5 1/4" x 13/16" x 96"Repeats 9 3/4"

MLD5900 Large Sicilian Frieze5 1/4" x 13/16" x 96" - Repeats 15 1/2"

MLD5902 Large Tuscan Country Frieze5 1/4" x 13/16" x 96" - Repeats 21"

Lineals are priced per lineal foot and sold individually as 8’ lengths. Lineals are packaged 4 perbundle - any order over 8 pieces may include 2 pieces that equal up to 8’ .



WR2:31


MLD5916 Vineyard Frieze3 1/2" x 13/16" x 96" - Repeats 17 3/4"

MLD5918 Cornucopias3 1/2" x 13/16" x 96" - Repeats 8"

MLD5910 Sicilian Frieze3 1/2" x 13/16" x 96" - Repeats 6 1/4"

MLD5912 Tuscan Country Frieze3 1/2" x 13/16" x 96" - Repeats 13 1/4"

MLD5914 Acanthus Scrolls3 1/2" x 13/16" x 96" - Repeats 10"



WR2:32



MLD5926 Sunflowers3" x 13/16" x 96" - Repeats 3 3/8"

The quality and beauty of our meticulously hand carved lineals with detaileddimensions, offers exciting new ways of combining a variety of mouldings to create

your unique decorative design, or architectural appeal.

See page 2:39 to create symmetrical friezes and panel moulds. Please note through jobsitemodifications, coved edge may also be removed, to create symmetry.

Lineals are priced per lineal foot and sold individually as 8’ lengths. Lineals are packaged4 per bundle - any order over 8 pieces may include 2 pieces that equal up to 8’ .

MLD5924 Woven Frieze3 1/4" x 13/16" x 96" - Repeats 2"

MLD5922 Running Palmette3 1/2" x 13/16" x 96" - Repeats 6"

MLD5920 Palmette3 1/2" x 13/16" x 96" - Repeats 1 3/4"


Panel MouldsMaple & Cherry • 8 Foot Lengths In-Stock

WR2:33


MLD5928 Laurel with Rosette3" x 13/16" x 96" - Repeats 7"

MLD5940 Acanthus Panel Mould1 1/2" x 5/8" x 96" - Repeats 1 5/8"

MLD5942 Running Leaf1 1/2" x 11/16" x 96" - Repeats 1 5/8"

MLD5944 Acanthus Wave1 1/2" x 11/16" x 96" - Repeats 1 3/8"

MLD5946 Laurel with Rosette1 1/2" x 11/16" x 96" - Repeats 5 5/8"

MLD5948 Flowers and Fret1 1/2" x 11/16" x 96" - Repeats 1 3/4"

MLD5949 Woven Panel Mould1 1/2" x 11/16" x 96" - Repeats 1 3/4" Repeats and carvings may vary slightly due to the nature of the hand carving process.


WR2:34



MLD5956 Classic Buttons1 1/2" x 9/16" x 96" - Repeats 1"

MLD5958 Palmette1 1/2" x 9/16" x 96" - Repeats 3/4"

MLD5960 Running Weave1 1/2" x 9/16" x 96" - Repeats 3/4"

MLD5962 Running Palmette1 1/2" x 9/16" x 96" - Repeats 2 5/8"

MLD5950 Running Coin1 1/2" x 9/16" x 96" - Repeats 5/8"

MLD5952 Vitruvian Wave1 1/2" x 9/16" x 96" - Repeats 1 1/8"

MLD5954 Spring Flowers1 1/2" x 9/16" x 96" - Repeats 3 3/4"

Lineals are priced per lineal foot and sold individually as 8’ lengths. Lineals are packaged4 per bundle - any order over 8 pieces may include 2 pieces that equal up to 8’ .




WR2:35


MLD5964 Twisting Ribbon1 1/4" x 3/4" x 96" - Repeats 1 1/8"

MLD5966 Running Coin2 1/8" x 5/8" x 96" - Repeats 1 1/8"

MLD5968 Egg and Dart Lipping Panel Mould lips 1/4" to 1/2"1 1/2" x 3/4" x 96"

MLD5970 Lamb’s Tongue Lipping Panel Mould lips 1/4" to 1/2"1 1/2" x 3/4" x 96"

MLD5972 Running Coin Lipping Panel Mould lips 1/4" to 1/2"1 1/2" x 3/4" x 96"

MLD5974 Traditional Lipping Panel Mould lips 1/4" to 1/2"1 1/2" x 3/4" x 96"

MLD5975 Traditional Lipping Panel Mould lips 1/4" to 3/4"2 1/4" x 13/16" x 96" Accepts Insert Panel Moulds page 2:36 - Application Drawings page 2:37.

profile with insert


WR2:36




MLD5976 Egg and Dart 3/4" x 5/8" x 96" - Repeats 1 7/8"

MLD5978 Egg and Dart 1 1/4" x 13/16" x 96" - Repeats 2 3/8"

MLD5979 Egg and Dart 1" x 3/4" x 96" - Repeats 1 5/8"

MLD5980 Lamb’s Tongue 1 1/4" x 11/16" x 96" - Repeats 1 1/2"

MLD5986 Bellflower and Bead 3/4" x 1/2" x 96" - Repeats 1 7/8"

MLD6000 Egg and Dart 1/2" x 3/8" x 96"

These Insert Panel Moulds fit crowns MLD5864, MLD5866 and panel mould MLD5975.They also offer numerous applications when used alone. See page 1:123

MLD6004 Running Coin 1/2" x 3/8" x 96"

MLD6005 Dentil 1/2" x 3/8" x 96"MLD6002 Lamb’s Tongue 1/2" x 3/8" x 96"

MLD5982 Dentil 2 3/8" x 11/16" x 96" - Repeats 1"

Insert Panel Moulds


WR2:37



Crown & Panel MouldsInsert Application

BUILD-UPS WITH EASE

MLD5982 accepts all of White River’s™ crowns as illustrated.

CROWN AND PANEL MOULD INSERT

MLD5864 and MLD5866 are designed to accept our 4 insert panel moulds.MLD 5975 is designed to accept our 4 insert panel moulds - it lips 1/4"- 3/4" thickness.

typical fit

typical fit

typical fit

typical fit

MLD5864, MLD6000 MLD5864, MLD6002 MLD5864, MLD6005 MLD5864, MLD6004

MLD5866, MLD6000 MLD5866, MLD6002 MLD5866, MLD6005 MLD5866, MLD6004

MLD5975, MLD6002 MLD5975, MLD6005 MLD5975, MLD6004MLD5975MLD6000

WR2:38


Parting Strips & MouldingsMaple & Cherry • 8 Foot Lengths In-Stock


MLD6020 Parting Strip13/16" x 3 1/4" x 96"

MLD6022 Parting Strip13/16" x 1 5/8" x 96"

MLD6026 Moulding3/4" x 11/16" x 96"

Use with 5 1/4" friezes and MLD 5924to create symmetrical profiles.

Use with 3 1/2" friezes to createsymmetrical profiles.

Use with 1 1/2" panel mouldsto create symmetrical profiles.

MLD6028 Moulding1/2" x 11/16" x 96"

MLD6030 Moulding5/16" x 7/16" x 96"

MLD6024 Parting Strip13/16" x 13/16" x 96"

MLD5616Reeded Panel Mould3/4" x 1/2" x 96"fits Reeded Radius Panel Mould

Cherry and Maple Dimensional Lumberproduced on Weinig MouldersMLD1x2 2" x 25/32" x 96"

MLD1x3.5 3 1/2" x 25/32" x 96"

MLD1x4.5 4 1/2" x 25/32" x 96"

MLD603813/16" x 3/8" x 96"

MLD5800 2" x 1" x 96"

MLD5802 1 1/2" x 3/4" x 96"

MLD5804 1" x 1/2" x 96"

MLD5792 4" x 2" x 96"

MLD5796 3" x 1 1/2" x 96"

MLD5798 2 1/2" x 1 1/4" x 96"

PM490 1 1/4" x 5/8" x 96"

PM492 3/4" x 3/8" x 96"

PM494 1/2" x 1/4" x 96"

PM495 3/8" x 3/16" x 96"

Ropes available in Maple,Cherry and Alder!

ONE-OF-A-KIND KITCHENS - CRV5121, FR8958

WR2:39



Combination DetailsPanel Mould & Frieze Applications

Works Perfect Every Time!MLD6038 is designed to be the perfect blocking to use with our friezes and panel moulds.

Small coved panel moulds shown below creating symmetrical application and designabilityincluding pilasters, chairrails and much more . . .

Please note through jobsite modifications, coved edgemay also be removed, to create symmetry.

PARTING STRIPS

MLD6020, MLD6022, MLD6024 are designedto accept capitals and frieze elements, creatingeasy build-ups both vertically and horizontally.

MLD5868, MLD60385 1/4" frieze and

MLD5924

MLD5848, MLD60383 1/2" frieze

MLD5866, MLD60381 1/2" panel moulds

PM6028with 3 1/2" friezes

PM6030with 1 1/2" panel

moulds

MLD5868, MLD5958, CRV5604, MLD6022,CRV5508, MLD5802


MLD5840, MLD5900, CRV5568,MLD6022, CRV5500

MLD5842, MLD5914, CRV5570, MLD6022,CRV5502, MLD5812

MLD5864, MLD6002, MLD5903, MLD6022,CRV5506, MLD5820PM6026

with 5 1/4" friezesand MLD5924

RH6075 ~ Tuscan Country Range Hood 65" x 15 1/2" x 1 1/4"

This fanciful range hood adds elegant grace to any room. An array of flowers and fruit includesmorning glories, bachelor buttons, hydrangea, cherries, pears and grapes.

• Applications include range hoods, mantels,valences and window treatments.

• It comes packaged as 3 pieces: a front, a left and a right hand side, which can be modified to fit any jobsite conditions.

• Shorten or lengthen this item with acenter key.

• Corner edges of the pieces will need to be mitered and assembly is required.

• Select from our beautiful hand carved crowns, corbels and panel moulds to complete your project.

65"

63"

8"

4 1/2"

52"6 1/2"

30"

28"

12"

1"2

1/2"

15 1

/2"

12"

1"2

1/2"

15 1

/2"

MLD5868, MLD5976, CRV5253RH6078, MLD5848, CRV5620,

CRV5614, CRV5228

MLD5840

side view

WR2:40


Range Hood RH6075Maple & Cherry • In-Stock


RH6078 ~ Scrolled Bolection Range Hood 72" x 5 1/2" x 4 3/4"

This bold and elegant bolection moulding cradles a soft and delicate carving and is reversible,which enhances its versatility on every project.

• Endless applications include range hoods, mantels, crown moulding, valances and window treatments.

• The range hood comes packaged as 9 pieces: 3 carved radius pieces, a front, a left and a right hand side, and the solid stock with profiled edges to go with it. Can be modified to fit jobsite conditions.



80 1/2"

66"

72"

34 1/4"

30"

4 3/4"4"

3/4"

3/4"

5 1/

2"

5 1/

2"

MLD5922,MLD6020,CRV5107

MLD5902, CRV5120

RH6080, CRV5097

side view

WR2:41




RH6080 ~ Traditional Scrolled Range Hood 72" x 9 5/8" x 1 1/4"

The simple elegance of this range hood offers versatility and imaginative design flexibility.

• Applications may include range hoods, mantels, valances and window treatments.

• The range hood comes packaged as 3 pieces: a front, a left and righthand side, which can be modified to fit jobsite conditions.

• Corner edges of the pieces will need to be mitered and assembly is required.• Select from our beautiful hand carved crowns, corbels and panel moulds to

complete your project.

30"

72"

28 1/2"

4 1/4"1 5/8"

9 5/

8"

9 5/

8"

5"4

5/8"

MLD5840, MLD5944, CRV5624

MLD5868, MLD5982,RH6080, CRV5259

MLD5868, MLD5986,CRV5123, CRV5087

side view

WR2:42




RH6082 ~ Rinceau Scrolls with Floral Basket Range Hood 72" x 12" x 1 1/4"

This French inspired range hood of acanthus scrolls and basket of flowersis an exquisite example of the beauty from a grand era.


• Range hood comes packaged as 3 pieces: a front, a left and righthand side, which can be modified to fit jobsite conditions.

• Corner edges will need to be mitered and assembly required.• Select from our beautiful hand carved crowns, corbels and panel

moulds to complete your project.

30"

44 1/4"

72"

12"

12"

7"2

5/8"

2 3/

8"

MLD5848, MLD5979,CRV5107 MLD5842, MLD5982, MLD5980, CRV5097

MLD5840, MLD5942, CRV5105

side view

WR2:43




RH6084 ~ Palmette Range Hood 62 1/8" x 12" x 1 1/4"

This handsome range hood with its deeply carved pattern of palmettes is a noble statement in any discriminating room.


• The range hood comes packaged as 3 pieces: a front, a left and a right hand side, which can be modified to fit jobsite conditions.



62 1/8"

33"

6 1/2"

12"

12"

9"1

1/2"

1 1/

2"

MLD5842, MLD5976, CRV5092MLD5868, MLD5840, MLD5980,

CRV5240CRV5097, MLD5922

side view

WR2:44




MLD5860, MLD5900,CRV5618, CRV5614

MLD5860, MLD5900,CRV5628, PM590

MLD5848, MLD5902,CRV5635, MLD5964


MLD5848, MLD5903,CRV5178, PM590

MLD5864, MLD6002, MLD5914,PM526, CRV5642

RH6078, MLD5902,MLD6024

RH6078, MLD5848, RH6075

MLD5840, MLD5903,CRV5172, MLD5942

MLD5840, MLD5902, MLD5942

MLD5840, MLD5914

RH6078, MLD5920, RH6080

RH6078, RH6080

RH6078, MLD5922

WR2:45



Rangehood Conceptsto be jobsite built

WR2:46


Columns - Full Rounds & SplitsMaple & Cherry • In-Stock


RopeCLM6204CLM6204-H

SmoothCLM6208CLM6208-H

SmoothCLM6202CLM6202-H

ReededCLM6200CLM6200-H

3.75" SQ"

20 3/4"

Island 35.25"

3"

11 1/2"

3.75" SQ"

16 1/2"

Island 35.25"

6"

12 3/4"

English Estate - Available Whole & Split

Country French - Available Whole & Split

SquareCLM6205CLM6205-Hnot available in42 1/4" lengths

FlutedCLM6206CLM6206-H

White River carries in-stock35 1/4" lengths in Maple and

Cherry as shown on pages 2:46-2:47. Also available as a promptdrop ship are other lengths and

species as denoted per style,minimal freight will be added to

invoice, see price list.

All Columns are trimmable.Catalog dimensions rounded to

the nearest 1/8".

Country French columns areavailable in lengths 29 1/4",35 1/4" and 42 1/4". Also

available in Alder, Hard Maple,Pine and MDF.

Call us for availabilityof other species. CLM6210

CLM6212, CRV5079, PM485, B-401

English Estate columns are available in lengths 29 1/4", 35 1/4" and 42 1/4" (no 42 1/4"CLM6205/-H). Also available in Alder, Hard Maple, Oak, Pine and MDF (no 42 1/4" MDF).

WR2:47



Columns - Full Rounds & SplitsMaple & Cherry • In-Stock

TwistedCLM6216CLM6216-H


PlainCLM6220CLM6220-H

RopeCLM6210CLM6210-H

PlainCLM6214CLM6214-H


2 3/4"

27 1/4"

Tape

rs fr

om 3

.75"

to 2

.75"

3"

4 1/4"

3.75" SQ"

20 3/4"

Island 35.25"

4 1/2"

10"

Classic - Available Whole & Split

Corinthian - Available Whole & Split

CLM6212

CRV5026, CLM6212, CRV5034, CRV5036, PM8535

CLM6214

Classic columns areavailable in lengths

35 1/4" and 42 1/4".Also available in Alder,

Hard Maple, Oak,Hickory, Pine and MDF

(no 42 1/4" MDF).

Corinthian columns areavailable in 34 1/2" lengthsonly. Also available in Alder

and Hard Maple.

WR2:48


Cabinet FeetMaple & Cherry • In-Stock


FT6292Fluted Bun Foot3 3/4" dia. x 4 1/2"

FT6293Traditional Bun Foot

3 3/4" dia. x 4 1/2"

FT6294Heavy Fluted Bun Foot

4 7/8" dia. x 5 3/8"

FT6295Heavy Traditional Bun Foot

4 7/8" dia. x 5 3/8"

4"

4"

2 1/2" 2 1/2"

FT6270Pedestal Corner Foot

8 1/4" each side x 4" x 1 5/8"

FT6272Pedestal Foot

8 1/4" x 4" x 1 5/8"sold left and right

CRV5502, MLD5812,CRV5079, MLD5616,

FT6290

MLD5962, MLD5970,FT6294

MLD5912, FT6292

Slight variations occur during thehand carving process.

3 3/4"

FT6290 / FT6290-HTall Fluted Foot

3 3/4" dia. x 8"

FT6291Tall Traditional Foot

3 3/4" dia. x 8"

2 1/2" 2 1/2"

FT6274Center Panel

16" x 2 1/2" x 1"


FR5921, PM8546, CRV5544,MLD5812, FT6293

All Turned Feet soldas whole and splits.

EXAMPLE: FT6292 - whole foot sold 1/pkg.FT6292-H - split foot sold 2/pkg.

WR2:49


Corner Post and FeetMaple & Cherry • In-Stock

CP624042" Filigree Corner Post2 3/4" sq. x 42"



CP624642" Traditional Corner Post2 3/4" sq. x 42"



FT6264Traditional Corner Foot

3 1/4" x 4 1/2" x 2 3/4"

FT6266Tall Traditional Corner Foot

3 3/8" x 6" x 2 3/4"

CP6244, FT6260, CRV5079,PM485

CP6250, FT6266

CRV5640, MLD5970, FT6262

FT6272

2 3/4"

4 1/

4"21

1/2

"

3 7/

8"28

1/4

"

4 1/

4"33

1/2

"

4 1/

4"21

1/2

"

3 7/

8"28

1/4

"

4 1/

4"33

1/2

"

FT6260Acanthus Corner Foot3 3/8" x 4 1/2" x 2 3/4"

FT6262Tall Acanthus Corner Foot

3 5/8" x 6" x 2 3/4"

2 3/4"

FT6293800-5580119

www.mouldings.com

WR2:50


Design Concepts Adornments forCabinetry & Furniture™

TRADITIONAL AMERICANA - MLD5860, MLD5900, CRV5520, CRV5514, CRV5546, RH6080, CRV5256, FT6272

FRENCH COUNTRY

MLD5848, MLD5940,MLD5968, MLD5986,

CRV5123, RH6080,CRV5087, MLD5976,

CRV5614, MLD5976,FT6272, FT6474

WR2:51


Design ConceptsAdornments forCabinetry & Furniture™

AMERICAN CHARM - MLD5982, MLD5848, MLD6024, CRV5512, MLD5820, MLD5948, RH6075, MLD5976,CRV5253, CRV5624, CP6250, FT6266

MORROCAN

MLD5840 MLD5848 CRV5173 CRV5586 CRV5516 MLD5824 MLD5978 MLD5842 MLD5976 RH6084 CRV5092 MLD5958 FT6294

WR2:52



FRENCH ESTATE RANGE - MLD5866, MLD6002, MLD5840,CRV5087, CRV5634, CRV5502,MLD5812, MLD5944, RH6080,CRV5624, FT6290, MLD5970

FRENCH ESTATE ARMOIRE - MLD5864, MLD6002, MLD5944,

CRV5502, MLD5812, CRV5636,CRV5634, CRV5079, MLD5616,

CRV5638, FT6290

FRENCH COUNTRY ESTATE ISLAND - MLD5978,MLD5976, CP6244, CRV5614, CRV5614, FT6266

AMERICAN CHARM ISLAND

MLD5926, CML6214FRENCH ESTATE ISLAND - CRV5576,

MLD5944, CML6212

WR2:53



FEMININE VANITY - MLD5866, MLD6002,MLD5840, PM511,CRV5046, MLD5970,MLD5900, FT6262,CRV5634, CRV5640,CRV5614

ROYAL VANITY - CRV5604, CRV5043, CRV5191,PM8569, CRV5614, CRV5618,

MLD5964, MLD5840, MLD6028,CRV5173, MLD6020, CRV5644,CRV5256, CRV5079, MLD5814,

PM485, CRV5510, FT6290,CRV5093, MLD5903

MORROCAN ISLAND

MLD5958, MLD5968, CRV5584, FT6294TRADITIONAL AMERICANA

CRV5256, MLD5928ENGLISH ESTATE - MLD5978, CRV5636,

MLD5979, MLD5972

WR2:54



FORMAL LIBRARY - CRV5568, MLD5962, MLD5840, MLD5830, MLD5982, MLD5980, DS1 x 2, PM590,PM526, MLD5970, PM529, CRV5580, MAN9035, CRV5576, CRV5097, CRV5570, MLD5922

ENGLISH COUNTRY ESTATE - MLD5868, MLD5864, MLD5950, CRV5614, CRV5620, CRV5616, CRV5512,CRV5820, RH6075, CRV5172, MLD5860, CRV5121, CRV5636 , FT6272, FT6274

WR2:55



FORMAL MANTEL SETTING - MAN9012, CRV5093, MLD5840, CRV5576, CRV5620, MLD5970, MLD5928,CRV5642, MLD6028, CRV5087, MLD5964, MLD5902, FT6262, CRV5644, MLD5903, CRV5071

ENGLISH TUDOR - MLD5848,MLD5902,RH6078, RH6075,CRV5230,CRV5620,MLD5968,CRV5614,MLD6020,CRV5228

WR2:56



VINEYARD SERIES WINE CELLAR - CRV5110, CRV5100, MLD5916, CRV5626, CRV5173, CRV5032,CRV5024, CRV5036, CRV5030, CRV5034, CRV5020, CML6210, MLD5848, MLD5968, CRV5259

RUSTIC MANTEL SETTING -MAN9012,MLD5848,CRV5582,MLD5832

WR2:57


Adornments forCabinetry & Furniture™ Design Concepts

TROPHY ROOM - RH6084, PM590, MLD5975 w/ MLD6002, MLD5840, MLD5982, MLD5864, MLD5800, MLD5842,CRV5518, CRV5512

WORKING LIBRARY - RH6078, RH6080, MLD5860, MLD5914, MLD5864, MLD6002, PM590, CRV5121, CRV5590,CRV5120

WR2:58 Index

Product . . . .Page #B400 . . . . . . . . .1:34B401 . . . . . . . . .1:34B403 . . . . . . . . .1:34B416 . . . . . . . . .1:34B435 . . . . . . . . .1:34B442 . . . . . .1:34, 44B460 . . . . . . . . .1:34B462 . . . . . . . . .1:34B463 . . . . . . . . .1:35B464 . . . . . . . . .1:35B468 . . . . . . . . .1:35B469 . . . . . . . . .1:35B470 . . . . . . . . .1:42BA42 . . . . . . . . .1:34BA43-C . . . . . . .1:34BA44 . . . . . . . . .1:34BA46 . . . . . . . . .1:34BA47 . . . . . . . . .1:34BA497 . . . . . . . .1:70BA498 . . . . . . . .1:70BA499 . . . . . . . .1:70BA6 . . . . . . . . . .1:70BA8440 . . . . . . .1:10BA8442 . . . . . . .1:10BA8444 . . . . . . .1:10BB15 . . . . . . . . .1:33BB153 . . . . . . . .1:33BB155 . . . . . . . .1:33BB156 . . . . . . . .1:33BB157 . . . . . . . .1:33BB158 . . . . . . . .1:33BB159 . . . . . . . .1:33BB16 . . . . . . . . .1:33BB17 . . . . . . . . .1:33BB18 . . . . . . . . .1:33BB8108 . . . .1:10, 11BB8109 . . . . . . .1:11BB8110 . . . . . . .1:11BB8111 . . . . . . .1:11BB8120 . . . . . . .1:11BB8122 . . . . . . .1:11BMS8038 . . . . .1:62BMS8053 . . . . .1:62BMS8071 . . . . .1:62BMS8080 . . . . .1:62BMS8088 . . . . .1:62BMS8094 . . . . .1:62BS126 . . . . . . . .1:40CA30 . . . . . . . . .1:31CA300 . . . . . . . .1:32CA302 . . . . . . . .1:32CA31 . . . . . . . . .1:31CA322 . . . . . . . .1:32CA323 . . . . . . . .1:32CA324 . .1:32, 36, 44CA325 . . . . . . . .1:32CA326 . . . . . . . .1:32CA327 . . . . . . . .1:32CA328 . . . . . . . .1:32CA329 . . . . . . . .1:32CA33 . . . . . . . . .1:31CA335 . . . . . . . .1:32CA342 . . . . . . . .1:32CA344 . . . . . . . .1:32CA36 . . . . . . . . .1:31CA360 . . . . . . . .1:32CA362 . . . . . . . .1:32CA363 . . . . . . . .1:32CA364 . . . . . . . .1:33CA368 . . . . . . . .1:33CA37 . . . . . . . . .1:31CA38 . . . . . . . . .1:31CA380 . . . . . . . .1:33CA382 . . . . . . . .1:33CA388 . . . . . . . .1:33CA389 . . . . . . . .1:33CA39 . . . . . .1:31, 35

Product . . . .Page #CA390 . . . . .1:33, 43CA391 . . . . .1:33, 42CA392 . .1:33, 44, 45CA393 . . . . .1:33, 44CA397 . . . . . . . .1:70CA398 . . . . . . . .1:70CA399 . . . . . . . .1:70CA40 . . . . . . . . .1:31CA41 . . . . . . . . .1:31CA5 . . . . . . . . . .1:70CA8320 . . . . . . .1:10CA8322 . . . . . . .1:10CA8326 . . . . . . .1:10CA8330 . . . . . . .1:10CA8336 . . . . . . .1:10CA8338 . . . . . . .1:10CA8340 . . . . . . .1:10CA8342 . . . . . . .1:10CA8344 . . . . . . .1:10CAB8033 . . . . . .1:63CAB8059 . . . . . .1:63CAB8071 . . . . . .1:63CAB8073 . . . . . .1:63CAB8078 . . . . . .1:63CAB8079 . . . . . .1:63CAB8086 . . . . . .1:63CAB8088 . . . . . .1:63CDS1x4 . . . . . . .1:41CDS1x6 . . . . . . .1:41CH610 . . . . . . . .1:36CH640 . . . . . . . .1:36CH650 . . . . . . . .1:36CH659 . . . . . . . .1:36CH689 . . . . . . . .1:33CH690 . . . . . . . .1:36CH693 . . . . . . . .1:36CLM6200 . . . . . .2:46CLM6200H . . . .2:46CLM6202 . . . . . .2:46CLM6202H . . . .2:46CLM6204 . . . . . .2:46CLM6204H . . . .2:46CLM6205 . . . . . .2:46CLM6205H . . . .2:46CLM6206 . . . . . .2:46CLM6206H . . . .2:46CLM6208 . . . . . .2:46CLM6208H . . . .2:46CLM6210 . . . . . .2:47CLM6210H . . . .2:47CLM6212 . . . . . .2:47CLM6212H . . . .2:47CLM6214 . . . . . .2:47CLM6214H . . . .2:47CLM6216 . . . . . .2:47CLM6216H . . . .2:47CLM6218 . . . . . .2:47CLM6218H . . . .2:47CLM6220 . . . . . .2:47CLM6220H . . . .2:47CM69 . . . . . . . . .1:24CM70 . . . . . . . . .1:24CM71 . . . . . . . . .1:24CM72 . . . . . . . . .1:24CM73 . . . . . . . . .1:24CM74 . . . . . . . . .1:24CM75 . . . . . . . . .1:24CM76 . . . . . . . . .1:24CM77 . . . . . . . . .1:24CM80 . . . . . . . . .1:24CM81 . . . . . . . . .1:24CM82 . . . . . . . . .1:24CM83 . . . . . .1:24, 25CM84 . . . . . . . . .1:24CM85 . . . . . . . . .1:24CM86 . . . . . . . . .1:24CM87 . . . . . . . . .1:24

Product . . . .Page #CM88 . . . . . . . . .1:24CM8801 . . . . . . . .1:4CM8808 . . . . . . . .1:4CM8810 . . . . . . . .1:4CM8812 . . . . . . . .1:4CM8820 . . . . . . . .1:4CM8823 . . . . . . . .1:4CM8825 . . . . . . . .1:4CM8830 . . . . . . . .1:4CM8834 . . . . . . . .1:5CM8837 . . . . . . . .1:5CM8840 . . . . . . . .1:5CM8850 . . . . . . . .1:5CM8852 . . . . . . . .1:5CM8854 . . . . . . . .1:5CM8856 . . . . . . . .1:5CM8857 . . . . . . . .1:5CM8858 . . . . . . . .1:5CM8859 . . . . . . . .1:5CM8860 . . . . . . . .1:5CM89 . . . . . . . . .1:25CM90 . . . . . . . . .1:25CM91 . . . . . . . . .1:25CO701 . . . . . . . .1:26CO702 . . . . . . . .1:26CO703 . . . . . . . .1:26CO704 . . . . . . . .1:26CO705 . . . . . . . .1:26CO707 . . . . . . . .1:26CO709 . . . . . . . .1:26CO711 . . . . .1:26, 42CO713 . . . . .1:26, 42CO720 . . . . .1:26, 42CO723 . . . . .1:26, 28CO730 . . . . . . . .1:26CP6240 . . . . . . .2:49CP6242 . . . . . . .2:49CP6244 . . . . . . .2:49CP6246 . . . . . . .2:49CP6248 . . . . . . .2:49CP6250 . . . . . . .2:49CR61 . . . . . . . . .1:36CR63-A . . . . . . .1:36CR64 . . . . . . . . .1:36CR65 . . . . . . . . .1:36CR66 . . . . . . . . .1:36CR67 . . . . . . . . .1:36CR68 . . . . . .1:33, 36CR69 . . . . . . . . .1:36CR7 . . . . . . . . . .1:70CR8 . . . . . . . . . .1:70CR800 . . . . .1:25, 27CR801 . . . . . . . .1:27CR806 . . . . . . . .1:27CR810 . . . . .1:25, 27CR820 . . . . . . . .1:27CR830 . . . . . . . .1:27CR840 . . . . . . . .1:27CR841 . . . . . . . .1:27CR850 . . . . . . . .1:27CR860 . . . . . . . .1:27CR862 . . . . . . . .1:27CR864 . . . . . . . .1:27CR866 . . . . . . . .1:27CR872 . . . . . . . .1:27CR880 . . . . . . . .1:27CR881 . . . . . . . .1:27CR882 . . . . . . . .1:27CR897 . . . . . . . .1:70CR898 . . . . . . . .1:70CR899 . . . . . . . .1:70CRV5020 . . . .2:8, 23CRV5022 . . . .2:8, 23CRV5024 . . . . . . .2:8CRV5026 . . . . . . .2:8CRV5028 . . . . . . .2:8CRV5030 . . . . . . .2:8

Product . . . .Page #CRV5032 . . . .2:8, 23CRV5034 . . . .2:8, 23CRV5036 . . . .2:8, 23CRV5038 . . . .2:8, 23CRV5040 . . . . . . .2:8CRV5043 . . . . . . .2:8CRV5044 . . . . . . .2:8CRV5046 . . . .2:8, 22CRV5047 . . . . . .2:22CRV5048 . . . .2:8, 22CRV5049 . . . .2:8, 22CRV5050 . . . . . . .2:8CRV5051 . . . . . . .2:8CRV5053 . . . . . . .2:9CRV5055 . . . . . . .2:9CRV5058 . . . . . . .2:9CRV5060 . . . . . . .2:9CRV5063 . . . . . . .2:9CRV5065 . . . . . . .2:9CRV5066 . . . .2:9, 23CRV5067 . . . .2:9, 23CRV5068 . . . .2:9, 23CRV5069 . . . . . . .2:9CRV5070 . . . . . . .2:9CRV5071 . . . . . . .2:9CRV5072 . . . . . . .2:9CRV5073 . . . . . . .2:9CRV5074 . . . . . . .2:9CRV5075 . . . .2:9, 24CRV5077 . . . . . . .2:9CRV5078 . . . . . . .2:9CRV5079 . .1:39, 2:9 . . . . . . . . . . . . .2:24

CRV5087 . . . . . . .2:9CRV5089 . . . . . . .2:9CRV5090 . . . . . .2:13CRV5091 . . . . . .2:10CRV5092 . . . . . .2:10CRV5093 . . . . . .2:13CRV5094 . . . . . .2:10CRV5095 .1:25, 2:10CRV5096 . . . . . .2:13CRV5097 . . .2:10, 26CRV5098 . . .2:10, 26CRV5099 .1:25, 2:10CRV5100 . . .2:10, 26CRV5105 . . .2:10, 27CRV5106 . . . . . .2:10CRV5107 . . .2:10, 27CRV5110 . . .2:10, 26CRV5112 . . .2:10, 26CRV5119 . . . . . .2:26CRV5120 . . .2:10, 26CRV5121 . . .2:10, 26CRV5123 .1:28, 2:10CRV5125 . . .2:10, 27CRV5126 . . .2:10, 27CRV5127 . . . . . .2:10CRV5129 . . . . . .2:12CRV5130 . . .2:12, 18CRV5133 . . .2:12, 18CRV5136 . . .2:12, 18CRV5139 . . . . . .2:12CRV5140 . . . . . .2:12CRV5143 . . . . . .2:12CRV5146 . . . . . .2:12CRV5147 . . . . . .2:12CRV5148 . . .2:12, 18CRV5149 . . .2:12, 18CRV5150 . . .2:12, 18CRV5160 . . .2:13, 19CRV5164 . . .2:13, 19CRV5166 . . . . . .2:13CRV5168 . . .2:13, 19CRV5169 . . .2:13, 19CRV5172 . . . . . .2:13CRV5173 . . . . . .2:13

Product . . . .Page #CRV5177 . . . . . .2:13CRV5178 . . .2:13, 19CRV5179 . . .2:13, 19CRV5181 . . . . . .2:13CRV5183 . . . . . .2:13CRV5185 . . . . . .2:13CRV5187 . . . . . .2:13CRV5191 . . . . . .2:13CRV5192 . . . . . .2:13CRV5193 . . . . . .2:13CRV5194 . . . . . .2:13CRV5195 . . . . . .2:13CRV5197 . . . . . .2:13CRV5198 . . . . . .2:13CRV5205 . . . . . .2:11CRV5210 . . . . . .2:11CRV5216 . . . . . .2:11CRV5218 . . . . . .2:11CRV5220 . . . . . .2:11CRV5226 . . . . . .2:11CRV5228 . . . . . .2:11CRV5230 . . . . . .2:11CRV5236 . . . . . .2:11CRV5238 . . . . . .2:11CRV5240 . . . . . .2:11CRV5250 . . .2:11, 27CRV5253 . . .2:11, 27CRV5256 . . .2:11, 27CRV5257 . . . . . .2:27CRV5259 . . .2:11, 27CRV5500 . . . . . .2:14CRV5502 . . . . . .2:14CRV5504 . . . . . .2:14CRV5506 . . . . . .2:14CRV5508 . . . . . .2:14CRV5510 . . . . . .2:14CRV5512 . . . . . .2:14CRV5514 . . . . . .2:14CRV5516 . . . . . .2:14CRV5518 . . . . . .2:15CRV5520 . . . . . .2:15CRV5522 . . . . . .2:15CRV5524 . . . . . .2:15CRV5526 . . . . . .2:15CRV5528 . . . . . .2:15CRV5530 . . . . . .2:15CRV5532 . . . . . .2:15CRV5534 . . . . . .2:15CRV5536 . . . . . .2:16CRV5538 . . . . . .2:16CRV5540 . . . . . .2:16CRV5542 . . . . . .2:16CRV5544 . . . . . .2:16CRV5546 . . . . . .2:16CRV5568 . . . . . .2:18CRV5570 . . . . . .2:18CRV5572 . . . . . .2:18CRV5574 . . . . . .2:18CRV5576 . . . . . .2:18CRV5578 . . . . . .2:18CRV5580 . . . . . .2:19CRV5582 . . . . . .2:19CRV5584 . . . . . .2:19CRV5586 . . . . . .2:19CRV5588 . . . . . .2:19CRV5590 . . . . . .2:20CRV5592 . . . . . .2:20CRV5594 . . . . . .2:20CRV5596 . . . . . .2:20CRV5604 . . . . . .2:20CRV5606 . . . . . .2:20CRV5608 . . . . . .2:20CRV5610 . . . . . .2:20CRV5612 . . . . . .2:20CRV5614 . . . . . .2:21CRV5616 . . . . . .2:21CRV5618 . . . . . .2:21

Product . . . .Page #CRV5620 . . . . . .2:21CRV5622 . . . . . .2:21CRV5624 . . . . . .2:21CRV5626 . . . . . .2:21CRV5628 . . . . . .2:22CRV5630 . . . . . .2:22CRV5632 . . . . . .2:22CRV5634 . . . . . .2:22CRV5635 . . . . . .2:22CRV5636 . . . . . .2:24CRV5638 . . . . . .2:24CRV5640 . . . . . .2:24CRV5642 . . . . . .2:24CRV5644 . . . . . .2:24DE168 . . . . . . . .1:28DE169 . . . . . . . .1:28DE170 . . . . . . . .1:28DE171 . . . . . . . .1:28DE172 . . . . . . . .1:28DE173 . . . . . . . .1:28DH190 . . . . . . . .1:35DH99 . . . . . . . . .1:35DS100 . . . . . . . .1:40DS110 . . . . . . . .1:40DS111 . . . . . . . .1:40DS1x10 . . . . . . .1:41DS1x12 . . . . . . .1:41DS1x2 . . . . . . . .1:41DS1x4 . . . . . . . .1:41DS1x6 . . . . . . . .1:41DS1x8 . . . . . . . .1:41FR8920 . . . . . . . .1:7FR8921 . . . . . . . .1:7FR8922 . . . . . . . .1:7FR8923 . . . . . . . .1:7FR8940 . . . . . . . .1:7FR8950 . . . . . . . .1:7FR8953 . . . . . . . .1:7FR8954 . . . . . . . .1:8FR8955 . . . . . . . .1:8FR8956 . . . . . . . .1:8FR8957 . . . . . . . .1:8FR8958 . . . . . . . .1:8FR8960 . . . . . . . .1:8FR8965 . . . . . . . .1:9FR8967 . . . . . . . .1:9FR8968 . . . . . . . .1:9FR8970 . . . . . . . .1:9FR8971 . . . . . . . .1:9FT6260 . . . . . . .2:49FT6262 . . . . . . .2:49FT6264 . . . . . . .2:49FT6266 . . . . . . .2:49FT6270 . . . . . . .2:48FT6272 . . . . . . .2:48FT6274 . . . . . . .2:48FT6290 . . . . . . .2:48FT6290H . . . . . .2:48FT6291 . . . . . . .2:48FT6291H . . . . . .2:48FT6292 . . . . . . .2:48FT6292H . . . . . .2:48FT6293 . . . . . . .2:48FT6293H . . . . . .2:48FT6294 . . . . . . .2:48FT6294H . . . . . .2:48FT6295 . . . . . . .2:48FT6295H . . . . . .2:48JA458 . . . . . . . .1:41JA658 . . . . . . . .1:41KEY031 . . . . . . .1:29KEY032 . . . . . . .1:29KEY033 . . . . . . .1:29KEY034 . . . . . . .1:29LBB007 . . . . . . .1:25LBB008 . . . . . . .1:25LBB009 . . . . . . .1:25

Product . . . .Page #LBR011 . . . .1:25, 34LCB040 . . . . . . .1:25LCB041 . . . . . . .1:25LCB042 . . . . . . .1:25LCD3031 . . . . . .1:50LCD3034 . . . . . .1:47LCD3044 . . . . . .1:51LCD3045 . . . . . .1:46LCD3046 . . . . . .1:51LCD3047 . . .1:48, 54LCD3053 . . . . . .1:48LCD3058 . . . . . .1:61LCD3059 . . . . . .1:58LCD3060 . . . . . .1:60LCD3062 . . . . . .1:60LCD3064 . . . . . .1:53LCD3066 . . . . . .1:55LCD3100 . . . . . .1:11LCD3110 . . .1:10, 11LCD3115 . . . . . .1:11LCD3125 . . . . . .1:11LCD3130 . . . . . .1:11LCD3200 . . . . . .1:42LCD3203 . . . . . .1:42LCD3206 . . . . . .1:43LCD3209 . . . . . .1:44LCD3212 . . . . . .1:44LCD4032 . . . . . .1:50LCD4036 . . .1:51, 59LCD4039 . . . . . .1:51LCD4040 . . . . . .1:57LCD4041 . . .1:48, 56LCD4042 . . . . . .1:58LCD4043 . . . . . .1:54LCD4045 . . .1:47, 52LCD4055 . . . . . .1:48LCD4061 . . . . . .1:60LCD4065 . . . . . .1:55LCD4067 . . . . . .1:53LCD4071 . . . . . .1:60LCD4077 . . . . . .1:49LCD4100 . . . . . .1:11LCD4110 . . . . . .1:11LCD4115 . . . . . .1:11LCD4125 . . . . . .1:11LCD4130 . . . . . .1:11LCD4200 . . . . . .1:42LCD4203 . . . . . .1:43LCD4206 . . . . .1:43, . . . . . . . . . . 1:44, 45LCD4209 . . . . . .1:45LCD6031 . . . . . .1:56LCD6035 . . .1:47, 54LCD6036 . . . . . .1:51LCD6037 . . .1:50, 53LCD6039 . . .1:51, 58LCD6042 . . . . . .1:48LCD6062 . . .1:50, 56LCD6069 . . . . . .1:60LCD6073 . . . . . .1:53LCD6075 . . . . . .1:49LCD6110 . . . . . .1:15LCD6141 . . . . . .1:15LCD6142 . . . . . .1:15LCD6144 . . . . . .1:15LCD6145 . . . . . .1:15LCD6146 . . . . . .1:15LCD6147 . . . . . .1:15LCD6148 . . . . . .1:15LCD6200 . . . . . .1:42LCD6203 . . . . . .1:42LCD6206 . . . . . .1:43LCD6209 . . . . . .1:43LCD6212 . . .1:44, 45LCD6215 . . . . . .1:45LCD8033 . . . . . .1:54LCD8034 . . . . . .1:47

WR2:59


Index

Product . . . .Page #LCD8048 . . . . . .1:52LCD8055 . . . . . .1:50LCD8062 . . . . . .1:58LCD8070 . . . . . .1:56LCD8071 . . . . . .1:56LCD8072 . . . . . .1:57LCD8073 . . .1:57, 61LCD8074 . . . . . .1:59LCD8075 . . . . . .1:53LCD8076 . . . . . .1:58LCD8077 . . . . . .1:59LCD8078 . . . . . .1:55LCD8079 . . . . . .1:52LCD8081 . . . . . .1:50LCD8082 . . . . . .1:51LCD8085 . . . . . .1:46LCD8086 . . . . . .1:61LCD8087 . . . . . .1:51LCD8088 . . . . . .1:54LCD8089 . . . . . .1:48LCD8090 . . . . . .1:49LCD8091 . . . . . .1:48LCD8092 . . . . . .1:60LCD8093 . . . . . .1:46LCD8094 . . . . . .1:49LCD8097 . . . . . .1:47LCD8098 . . . . . .1:55LCD8099 . . . . . .1:60LCD8102 . . . . . .1:53LCD8136 . . . . . .1:15LCD8138 . . . . . .1:15LCD8140 . . . . . .1:16LCD8142 . . .1:16, 41LCD8144 . . . . . .1:16LCD8146 . . . . . .1:16LCD8148 . . . . . .1:17LCD8150 . . . . . .1:17LCD8152 . . .1:14, 17LCD8154 . . . . . .1:17LCD8156 . . . . . .1:18LCD8158 . . . . . .1:18LCD8160 . . .1:14, 18LCD8162 . . . . . .1:18LCD8164 . . . . . .1:19LCD8166 . . .1:14, 19LCD8168 . . .1:19, 41LCD8170 . . . . . .1:20LCD8172 . . . . . .1:20LCD8174 . . . . . .1:20LCD8176 . . .1:14, 20LCD8178 . . . . . .1:21LCD8180 . . . . . .1:21LCD8182 . . . . . .1:21LCD8184 . . . . . .1:21LCD8186 . . . . . .1:22LCD8188 . . .1:22, 26LCD8190 . . . . . .1:22

Product . . . .Page #LCD8192 . . . . . .1:23LCD8194 . . . . . .1:23LCD8196 . . . . . .1:23LCD8200 . . . . . .1:42LCD8203 . . . . . .1:42LCD8206 . . . . . .1:43LCD8209 . . . . . .1:43LCD8212 . . . . . .1:43LCD8215 . . . . . .1:44LCD8218 . . . . . .1:44LCD8221 . . . . . .1:44LCD8224 . . . . . .1:45LCD8227 . . . . . .1:45LCD8230 . . . . . .1:45LM90 . . . . . . . . .1:36LM91 . . . . . . . . .1:36LM92 . . . . . . . . .1:36LM93 . . . . . . . . .1:36MAN8033 . . . . .1:63MAN8046 . . . . .1:63MAN8048 . . . . .1:63MAN8073 . . . . .1:63MAN8078 . . . . .1:63MAN8082 . . . . .1:63MAN8085 . . . . .1:63MAN8086 . . . . .1:63MAN8091 . . . . .1:63MAN8102 . . . . .1:84MAN8105 . . . . .1:84MAN8108 . . . . .1:84MAN8111 . . . . .1:84MAN8114 . . . . .1:84MAN8117 . . . . .1:84MAN8120 . . . . .1:85MAN8123 . . . . .1:85MAN8126 . . . . .1:85MAN8129 . . . . .1:85MAN8132 . . . . .1:85MAN8135 . . . . .1:85MAN9012LW . . . .2:2MAN9015LW . . . .2:3MAN9018LW . . . .2:4MAN9021LW . . . .2:5MAN9030LW . . . .2:6MAN9033LW . . . .2:6MAN9035LW . . . .2:6MAN9036LW . . . .2:6MAN9039LW . . . .2:7MAN9042LW . . . .2:7MB189 . . . . . . . .1:28MB191 . . . . . . . .1:28MB192 . . . . . . . .1:28MED1230 . . . . .1:68MED1429 . . . . .1:68MED1512 . . . . .1:68MED1516 . . . . .1:68MED1534 . . . . .1:68

Product . . . .Page #MED1630 . . . . .1:68MED1632 . . . . .1:68MED1660 . . . . .1:68MLD1X2 . . . . . .2:38MLD1X3.5 . . . . .2:38MLD1X4.5 . . . . .2:38MLD5616 . . .2:21, 38MLD5792 . . . . . .2:38MLD5796 . . . . . .2:38MLD5798 . . . . . .2:38MLD5800 . . .2:17, 38MLD5802 . . .2:17, 38MLD5804 . . .2:17, 38MLD5810 . . . . . .2:17MLD5812 . . . . . .2:17MLD5814 . . . . . .2:17MLD5820 . . . . . .2:17MLD5822 . . . . . .2:17MLD5824 . . . . . .2:17MLD5830 . . . . . .2:19MLD5832 . . . . . .2:19MLD5840 . . . . . .2:28MLD5842 . . . . . .2:28MLD5844 . . . . . .2:28MLD5846 . . . . . .2:28MLD5848 . . . . . .2:28MLD5860 . . . . . .2:29MLD5864 . . . . . .2:29MLD5866 . . . . . .2:29MLD5868 . . . . . .2:29MLD5869 . . . . . .2:29MLD5900 . . . . . .2:30MLD5902 . . . . . .2:30MLD5903 . . . . . .2:30MLD5910 . . . . . .2:31MLD5912 . . . . . .2:31MLD5914 . . . . . .2:31MLD5916 . . . . . .2:31MLD5918 . . . . . .2:31MLD5920 . . . . . .2:32MLD5922 . . . . . .2:32MLD5924 . . . . . .2:32MLD5926 . . . . . .2:32MLD5928 . . . . . .2:33MLD5940 . . . . . .2:33MLD5942 . . . . . .2:33MLD5944 . . . . . .2:33MLD5946 . . . . . .2:33MLD5948 . . . . . .2:33MLD5949 . . . . . .2:33MLD5950 . . . . . .2:34MLD5952 . . . . . .2:34MLD5954 . . . . . .2:34MLD5956 . . . . . .2:34MLD5958 . . . . . .2:34MLD5960 . . . . . .2:34MLD5962 . . . . . .2:34

Product . . . .Page #MLD5964 . . . . . .2:35MLD5966 . . . . . .2:35MLD5968 . . . . . .2:35MLD5970 . . . . . .2:35MLD5972 . . . . . .2:35MLD5974 . . . . . .2:35MLD5975 . . . . . .2:35MLD5976 . . . . . .2:36MLD5978 . . . . . .2:36MLD5979 . . . . . .2:36MLD5980 . . . . . .2:36MLD5982 . . . . . .2:36MLD5986 . . . . . .2:36MLD6000 . . . . . .2:36MLD6002 . . .2:29, 36MLD6004 . . . . . .2:36MLD6005 . . . . . .2:36MLD6020 . . . . . .2:38MLD6022 . . . . . .2:38MLD6024 . . . . . .2:38MLD6026 . . . . . .2:38MLD6028 . . . . . .2:38MLD6030 . . . . . .2:38MLD6038 . . . . . .2:38MM187 . . . . . . .1:35MM195 . . . . . . .1:35MPB9012LW . . . .2:2MPB9015LW . . . .2:3MPB9018LW . . . .2:4MPB9021LW . . . .2:5OS101 . . . . . . . .1:40OS102 . . . . . . . .1:40PB170 . . . . . . . .1:29PB171 . . . . . . . .1:29PB183 . . . . . . . .1:29PB185 . . . . . . . .1:29PB186 . . . . . . . .1:29PB187 . . . . . . . .1:29PB192 . . . . . . . .1:29PB193 . . . . . . . .1:29PCOR4320 . . . .1:69PCOR4323 . . . .1:69PCOR4326 . . . .1:69PCOR4329 . . . .1:69PCOR4332 . . . .1:69PCOR4335 . . . .1:69PCOR4338 . . . .1:69PCOR4341 . . . .1:69PCOR4344 . . . .1:69PCOR4347 . . . .1:69PCOR4350 . . . .1:69PCOR4353 . . . .1:69PM1 . . . . . . . . . .1:70PM2 . . . . . . . . . .1:70PM3 . . . . . . . . . .1:70PM4 . . . . . . . . . .1:70PM07 . . . . . . . . .1:38

Product . . . .Page #PM08 . . . . . . . . .1:38PM09 . . . . . . . . .1:38PM10 . . . . . . . . .1:38PM11 . . . . . . . . .1:38PM12 . . . . . . . . .1:38PM14 . . . . . . . . .1:38PM20 . . . . . . . . .1:38PM22 . . . . . . . . .1:38PM22-pl . . . .1:34, 38PM23-B . . . . . . .1:38PM24 . . . . . . . . .1:38PM25 . . . . . . . . .1:38PM26 . . . . . . . . .1:38PM27 . . . . . . . . .1:38PM28 . . . . . . . . .1:38PM29 . . . . . . . . .1:38PM480 . . . . .1:39, 43PM482 . . . . .1:39, 43PM484 . . . . . . . .1:39PM485 . . . . . . . .1:39PM486 . . . . . . . .1:39PM490 . . .1:39, 2:38PM492 . . .1:39, 2:38PM494 . . .1:39, 2:38PM495 . . . . . . . .2:38PM50 . . . . . . . . .1:38PM500 . . . . . . . .1:39PM505 . . . . . . . .1:39PM511 . . . . . . . .1:39PM52 . . . . . . . . .1:38PM520 . . . . . . . .1:39PM521 . . . . . . . .1:40PM525 . . . . . . . .1:40PM526 . . . . . . . .1:40PM527 . . . . . . . .1:40PM529 . . . . . . . .1:40PM530 . . . . . . . .1:40PM535 . . . . . . . .1:40PM537 . . . . . . . .1:40PM538 . . . . . . . .1:40PM539 . . . . . . . .1:40PM54 . . . . . . . . .1:38PM540 . . . . . . . .1:40PM55 . . . . . . . . .1:38PM553 . . . . . . . .1:40PM560 . . . . . . . .1:40PM561 . . . . . . . .1:40PM569 . . . . . . . .1:40PM56-B . . . . . . .1:38PM57 . . . . . . . . .1:39PM570 . . . . . . . .1:40PM577 . . . . . . . .1:40PM58 . . . . . . . . .1:39PM580 . . . . . . . .1:40PM582 . . . . . . . .1:40PM585 . . . . . . . .1:40PM586 . . . . . . . .1:40

Product . . . .Page #PM59 . . . . . . . .1:39PM590 . . . . . . . .1:40PM593 . . . . . . . .1:40PM595 . . . . .1:13, 40PM597 . . . . . . . .1:40PM70 . . . . . . . . .1:39PM71 . . . . . . . . .1:39PM72 . . . . . . . . .1:39PM73 . . . . . . . . .1:39PM74 . . . . . . . . .1:39PM8511 . . . . . . .1:12PM8520 . . . . . . .1:12PM8522 . . . . . . .1:12PM8523 . . . . . . .1:12PM8524 . . . . . . .1:12PM8525 . . . . . . .1:12PM8526 . . . . . . .1:12PM8527 . . . . . . .1:12PM8528 . . . . . . .1:12PM8529 . . . . . . .1:12PM8532 . . . . . . .1:12PM8535 . . . . . . .1:12PM8536 . . . . . . .1:12PM8540 . . . . . . .1:12PM8541 . . . . . . .1:12PM8545 . . . . . . .1:12PM8546 . . . . . . .1:12PM8552 . . . . . . .1:13PM8553 . . . . . . .1:13PM8555 . . . . . . .1:13PM8557 . . . . . . .1:13PM8558 . . . . . . .1:13PM8560 . . . . . . .1:13PM8561 . . . . . . .1:13PM8564 . . . . . . .1:13PM8565 . . . . . . .1:13PM8568 . . . . . . .1:13PM8569 . . . . . . .1:13PM8572 . . . . . . .1:13QR105 . . . . . . . .1:40RE104 . . . . . . . .1:40RE107 . . . . . . . .1:40RH6075 . . . . . . .2:40RH6078 . . . . . . .2:41RH6080 . . . . . . .2:42RH6082 . . . . . . .2:43RH6084 . . . . . . .2:44ROS157 . . . . . . .1:29ROS158 . . . . . . .1:29ROS159 . . . . . . .1:29ROS160 . . . . . . .1:29ROS161 . . . . . . .1:29ROS162 . . . . . . .1:29ROS163 . . . . . . .1:29ROS164 . . . . . . .1:29ROS165 . . . . . . .1:29ROS166 . . . . . . .1:29

Product . . . .Page #ROS167 . . . . . . .1:29ROS168 . . . . . . .1:29ROS169 . . . . . . .1:29TC120 . . . . . . . .1:35TC140 . . . . . . . .1:35TC150 . . . . . . . .1:35SBB003 . . . . . . .1:25SBB004 . . . . . . .1:25SBB005 . . . . . . .1:25SCB045 . . . . . . .1:25SCB046 . . . . . . .1:25SCB047 . . . . . . .1:25

SPECIFIED LENGTHS - There is an upcharge for specified lengths, ranging from 20%–40%. The customer also pays for additional footageneeded to pull specified length orders. See specifications under each moulding category. Remember to take into consideration specified length chargesfor small UPS orders.Please feel free to call us with any design questions and we will be glad to help you. Our staff can help you detail your entire job.RETURNS - Stock mouldings cannot be returned without prior approval and must have an RGA number. Mouldings will not be credited that are(1) marked on, (2) modified in any way, (3) exposed to excessive sun or moisture, (4) have sheetrock mud, primer, stain, "job site damage" or (5) orpast 60 days from invoice purchase date. For stock mouldings to receive credit, moulding must be in resellable condition. Returns are F.O.B. Buyer,and are subject to a 20% restocking charge. Loose mouldings will only be accepted that are 8 feet and longer unless in original plastic covering. Anycustom millwork is not returnable.WARRANTY - White River’s Hardwood Mouldings are produced from clear kiln-dried hardwood lumber. All lumber is NHLA graded and dried to6–8% moisture content. Our mouldings are produced from 65% 12'–16' lengths in stock mouldings (overall 3'–16'). Our mouldings are precisionmachined by Wienig Moulders using Wienig Knife Tooling. We are not responsible for changes in mouldings due to environmental conditions duringor after installation. Please follow information in Volume IV Catalog, ”Technical Information, Section IV” to avoid problems associated with largemouldings.

For further information on products and distribution, please call:

IN-STOCK • PROMPT SHIPMENT • WORLDWIDE DISTRIBUTION

800-558-0119G

1197 Happy Hollow Road • Fayetteville, Arkansas 72701 U.S.A.

479-442-6986 • Fax 479-444-0406www.mouldings.com

J

®

White River Hardwoods-Woodworks, Inc™., is the Industry Leader in the design and manufacture of EmbellishedHardwood Mouldings™ and Authentic Hand-Carved® Woodcarvings. We offer 1,000 stock products as well as customwork, radius work and plaster medallions. Our elegant mouldings are perfect for well-appointed interiors, libraries,cabinets and furniture.

a THE MILLWORK CAD CD FOR AUTOCAD® offers the complete collection of Elegant Hardwood Mouldings, Authentic Hand-Carved® Woodcarvings and Adornments for Cabinetry and Furniture™ in .dwg format for Computer Aided Design; also downloadable from our website .dxf format is available upon request.

a OUR 20-20 DESIGN TECHNOLOGY CD offers state of the art design, specifications, photo-realistic rendering and three-dimensional (“3D”) visualization of Cabinetry and Furniture for White River™ products in the residential and commercial interior design markets. CD available late Summer 2005. Must have 20-20 software to use.

a SOLID DESIGN: Planit Solutions' Solid Design is a solid modeling application engineered specifically to meet the needs of today's designers of Cabinetry and Furniture. Solid Design allows for the use and mix of various pre-manufactured lines with true custom cabinets. Must have Solid Design software to use.

a PLANIT FUSION: Planit Fusion sets a new standard for point of sale design systems for Cabinetry and Furniture, by creating the perfect balance of design and sales administration. Utilizing the latest technology, Fusion combines professional design and presentation software with effective client information management. Must have Planit Fusion software to use.

a www.mouldings.com: Be sure to visit our website, where you can print our profiles, obtain technical information or contact us by e-mail.

adornments

Documents

12crv5524large splicer3

acanthus finial2

crv5538medium acanthus

crv5540small acanthus

crv5504small acanthus

medium capitalssold

small capitalssold

medium fits medium