5140XM

USER’S MANUAL

[ADEMCOJ

NW20 8/92

TABLE OF CONTENTSINTRODUCTION ....................................................... ... .......................................................SYSTEM OVERVIEW ............................. ................ ... ... .,,,.,,,,,,,,.,.,,,,,,,,,.,..,..,.,,,,,,,.,.... :

FIRE & SURGLARY PROTECTION..,, . .. ..... ..... ........ ......... .. 4

BURGLARY SYSTEM ENTRY/EXIT DEI.,4YS...... ...... ................ . ....... ... ....... ... 4USER SECURITY CODES,,,,,,,.,,,,,,,.,,.,,,......,..,.,,,,,,..,.,,,.,.,,...,,,,,,.,.....,.,.,.,,,,,,....,,...,,, 5

CONSOLE SOUNDS.,,,,,,.,,,,,, ...................................................................................... 5

SELF-HELP FEATURE .................................................................................................5FIRE ALARM SYSTEM OPERATION ................................................................................6

CONSOLE FIRE Functions ................................................................................... . 6NORMAL STANDBY OPERATION .... . ..... . .... ........ . ......... .. 7

IN CASE OF FIRE ,,,,...,,,,,,,.,.,,,..,,,,,,,...,..,,..,,.,.,,,,,.,.,,,,,.,.,.,,..,,...,,.,...,,...,,...,,.,,........... 7SILENCING/RESE~lNG FIRE ARMS,,.,,, ................................ . . 7SUPERVISORY CONDITIONS ,,,.,,,...,,,..,,.,,.,.,,..,....,,.,,,...,..,,..,,,.,,.,...,.,,..,,....,,.,,,.,,,,,,,S

BYPASSING FIRE ZONES .......................................................................................... 8ACTIVATING FIRE DRILL TEST ....... . . . .. ..... ..... . . .... .. ... .... ....... ... .. .... 9

SURGLARY ALARM SYSTEM OPERATION ................................................................. 10CONSOLE SURGURY FUNCTlON,,,..,,,,,,,,,.,..,.,,,,,,.,.,,,,,,.,.,,......,,,.,.,...,.......,..,...... 10CHECKING FOR OPEN SURGURYZONES ........................................................... 12

Displaying All Zone Des.tiptom ,..,,,.,,.,, ............................................................... 12BYPASSING BURGLARY PROTECTION ZONES ...... ... ............ ............. ... .. .. 13

@ick SyWss Feature .......................................................................................... 13Displaying Bypmsd Zonw ................................................................................. 13

ARMING PERIMETER ONLY (STAY/lNSTANT) .,,,,,,.,.,,,,,,,.,,,,,,,,,,,.,..,,,,..,.,.,,..,,,,,,,, 14ARMING ALL PROTECTION (AWAY/WXIMUM) ..................................................... 15DISARMING THE SYSTEM AND SILENCING AURMS ........................................... 16DURESS CODE ,.,,,,,,,,,,..,...,.,,,,...,,...,,.,,,,.,,...,.......,..,,,,,.......,,,,,,,,,,,,,,..,,,,,,,,,,,,,,,,,,,,, 16CHIME MODE .,,,,,,,,,,,, .............................................................................................. ,7TESTING THE BURGLARY SYSTEM................................................................ ........ 17

FIRE & SURGLARY COMMON FEATURES .. .............................................................. 18VIEWING CENTRAL STATION MESSAGES,,,..,,.,,,..,,,...,,.....,,,........,,,,,.,.,..,.,,.,,,,,,,. 16PANIC KEYS,,,,,.,.,..,..,,,., ........................................................................................... ,8ADDING, CHANGING & DELETING TEMPORARY USER CODES,,,,,..,., ................ 19TROUSLE CONDITIONS ,,,,..,,,,................................................................................. 20BYPASSING SYSTEM ZONES & SYSTEM OUTPUTS . . . ... ......... . ................ 21

QUICK GUIDE TO SYSTEM FUNCmONS,, .................................................................... 225140XM EVENT L~GING PRNEDURES ................................................................... 23SUMMARY OF AUDISLE NOTIFICATIONS ................................................................... Z4

GLOSSARY ........................................................................................................... .... ..... 25PROTECnON POINT DESCRIPTfONS .......................................................................... 25

Abut This ManualTtis manual is a step-by-step guide that will acquaint YOUwith the systemnsfeatures andbenefik, It defines the components and their functions, describes their operation, andacquaink you with normal and emergency procedures. Refer to the GLOSSARY at theback of this manual for tifinitions of terms usd throughout.

-2-

INTRODUCTIONCongratulations on your ownership o! a 5140XM Alarm System, YouVe made a wise;~;y in chmsing it, for it repr%ents tie latest in fhe and swurify protection technology

Depending on your installation, your The system uses microcomputersystem may offer you up to thr- forms of Iechnolqy to monitor all protection zonesprotection: fire warning, burglaw and and syste,m sla!us and providesemergency. To reafize the system’s full apprOprlate Information for dsplay 0“ thepotential, it is important that you feel Consola(s) used with the system, andcomfotiable in operating it. Your system initiates appropriate alarms Whanconsisis of at least one console wtich programmd to do so, tie system Mn alsoorovides full control of svstem ooeration transmit aDDrOOriate alarm or statusand various fire warning ;ensors such as messag% o;ar &e phone flnaa to a antialsmoke and heat datecto= which provida alarm monitoring sbtiin.eafly fire warning protection, Your systemmay also include vafious secutity sensowsuchs tiortindow contacb and Nwiveinfrarti titectom which provide perimatera“d intetior burgla~ protection.

\ /

=

THE ALPHA DISPLAY CONSOLE features a multifunction, backtit f2.key dgilal keypad,and uses a Z-tine, 32-character holly programmable alphanumeric tiquid Cryskl ~spfay(LCD) which displays the natire and Io-rion of all owurrenas in Iriendly English. Conwledisplay backlighting is programmable to afways shy on or to tight only when a key ispms%d, then N1Ooff a few minutes later. A salf-help fealura is also incorporated; wtich,when activated, will @splay abbreviat~ insuuctions for ma key rhat h% Men pres%d. Theconsole also has a built.in sounder.

-3-

SYSTEM OVERVIEWFIRE& BURGLARY PROTECTfOf4One or more sensing devkes will have kenassigned by the installer of your alarmsystem to each of the various fire andburgla~ protection zones in your system(although not ovmy zone may have beenused), For example, stockroom smokedetwtors may have b~n %signti to zone01, hallway fire pull sbtions to zone 02, thesensing device on your Entry/Exit door tozone 03, sensing devims on store Irontwindows to zone 04 and so on. Thesenumbem will appear on the console displaywindow along with an alpha descriptor forthat zme (if programmed), when therespmtive zone is faufted,The fire potiion of your alarm system isakays on, When a fire alarm condition isdetected, the console will produce aninterrupted sound and the external firewarning sounders will produ~ either acontinuous or intewpted sound dependingon which was selected by your inshller, Amwsage will appear in the console displaywinhw that identifies the zone(s) causingtie tire slam, In atitf on, if your system isconnectti to a Wntral monitoring station, afire alarm report will be sent to thatmonitoring smtion. Refer to the fire alarmsystem sections of this manual for ad%cription of procedures for silencing firealarms, bypassing fire zones and activatinga tire drill test.

The burgla~ ~nion of your alarm system(if used) must b armed before it will Se”$eburgla~ slam conditions, Whw an alarmWCUB, both the con801eandtheexiernalburglary alarm sounder will produce amntinuous sound. A message will appearin the console dispfay window thatidentitie the zone(s) causing the burglaqafarmand aburgfary alarm repon will besent to the central monitoring station (ifyour system is so connected). Oisarmingthe system will stop alarm sounding. Yoursystem provides four modes of burglaryprotection: STAY, AWAY, lNSTANT andMAXIMUM and aven lets YOUBYPASSselected zones of protection” wtile leavingthe rest of the burgla~ system armed. Thesystem also provides a CHIME mode, foralefling usem to the opning and closing ofdoors and windows while the system isdisarmad, Refer to the burglary alarmsection of this ma””al fOra& scriptiOn ofpromd”res for using those features.

SUMMARY OF ARMING MODESMode I Features For Each Arming Mode

Exit Oelay Eotw Oelay Perimeter Armad IAWAY

interior ArmedYes Yes Yes Yes

STAY Yes Yes Yes 1 .!.

INSTANT Yes No Y=MAXIMUM Yes No Yes --- !

I Nov.. I

BURGLARY SYSTEM ENTRY/EXIT DELAYSIf used, the burglary portion of your systamis programmti by tie installer with a presettime delay, during which the systam mustbe disarmed upon entering or a“ alarm willowr. This featuraalfows you to leave andreenter through the ent~ *lay &or withoutsetting off the alarm, The ant~ dalay faaturecan also be turned off for greater secutilywhen sleeping or while away for extendedpetiods of time (fNSTANT R MAXIMUMmodes). %a your inskller for your delaytimes,

-4-

R=ord your delay times berm

Ent~ Oelay i: —

Ent~ Oelay 2:

Exit Oelay 1:

Exit Oetay 2:

Oelays may be no more than 60 secondsfor Exit tilay or 45 s%onb for Ent~ @layfor a UL Listed Commercial burglaryapplication.

SYSTEM OVERVIEWUSER SECURITY CODESThe 5140xM allows up to 99 4-digh usersecurity codes to be programmed, Thesecdes are enterd at the consoless keypadand are used to operate the system.

When pr~rammed, each cob is assign~an authority level which determines thesystem tinctions that code can perform,For example, some codes can be givenauthority to arm/disarm the burgla~system and to bypass fire and burglaWzones. Other codes may be restricted toarm/disarming the burglaW system only,There are six authority levels: master,manager, operator ASOWratOr B, o~ratorC & duress. Generally speaking, themaster cde is Intendd to be known andused only by the building owner, Themanager rnk is intenhd to b known andused only by the building euperintentint,the building security officer or the fike,These males allow full convol over systemoperation, The operator’s codes areintended 10 be used by individuals whonmd fimited and{or temWra~ control oversystem operation, The duress coh allowsa silent panic report to be transmitted tothe central station when the user is for@to arm or disarm under threat. Refer to tie.ADDING, CHANGING AND DELETINGUSER CODES. section for detaileddescriptions of the functions that thesecties can petiorm,

All codes can be used interchangeablywhen petiorming system operations withinthe Umik of each cotis authotity level, Forexample, the burgla~ system may bearmed with an operator’s codo and thendisarmed with a master or manager-scdes. Note that an operator C ade @nonly disarm tie burglary system if it wasusd to arm the system,Your installer will have programmed atleast one master code and possiblyseveral other types of cod% at installationtime. Make sure you have a rewrd of themales that were prWrammed, The m~twand manager<swales may be used to add,change or delete additional codes fortem~ra~ usem on an “as neek~ ksis,Refer to the .ADDING, CHANGING ANDDELETING USER CODES section formore information,BASIC PROCEDURETo perform most system tinctions, simplyenter your rode, then prew the key for thedesired function, To disarm the burgla~system or clear the console display, entwyour code, then press the OFF [1] key,~s is referred to In this ma””aI aS th~“OFF. smuenco.. . . . . . . . .NOTE: if .Quick Arming. w= programmedby the installer, the [#] key a“ k pres~din place of fhe security mde when armingthe burgla~ system, The security codemust stitl be us~ to disarm the system,

CONSOLE SOUNDS SELF.HELP FEATUREThe console has a built4n sounder which Abbreviated user,s instwctions are builtwill produce an interrupted sound for fire into the system that mn be easily viewedalarms and a continuous sound forburglary alarms. This sounder will also

on the alpha console’s message display

“beep. during certain system functions,scrwn. This featire will prove ~dioulatiyuseful if this manual is not conveniently

such as when depressing keys to operate accessible when you need to perform athe system (to acknowledge the key seldom usw system pmmdure with whichpress], during ent~lexit delay times andduring chime rook, &me of thwe so””k

you are not familiar,

mn be optionally suppressed, Ask your To view the abbreviated instructions,

installer if this h= ban hne, simply press and hold down tie tinctionkey of intem6t until the &stiption sua b?PFar (about 5 s=onk) and tien mIeseIt. Refer to the FUNCTfONS OF THECONSOLE section for detailedh%riptions of each key bntiion,

-5-

FIRE ALARM SYSTEM OPERATIONCONSOLE FIRE FUNCnnNS1

2

3

4.

5,

ALPHA DISPLAY WINDOW: A 2-fl”a,32-character Liquid CWslal Oisplay(LCD). Displays protection poinlidentification and system statusm~sagm, and user insvuotions,OFF KEY: Slen@s alarms and audibletrouble indicators, and clears visualdsplays after the problem has beanWm%ted,SYPASS KEY: Removes individualprotection zones from being monitoredby the system. Displays previouslybypmsd protwtion zones,# Km: Is used to activate the Fire DtillFunc!ion.KEYS O-9: Used to enter yourind~idual sewrity COM(S),

6

7

8.

9.

CODE KEY: Allows the entw ofadditional security codes that an begiven 10other usem of the system.REAOY KEY: Displays all faultedprotection zon6s Ttds hey is also medto display all zone descriptions thathave been programmed Ior yoursystem, by holding tiis key hwo for atle66t 5 s~onds,POWER INDICATOR: (GREEN) Litwhen prima~ power i~ on, If ON,system is operating on its backupbattery power. CALL YOURINSTALLER IMMEDIATELY.INTERNAL SOUNDER: Sourw ofaudible internal warning andmntirmation sounk, ae well * alarms(see .Summary of AudibleNotifirntio”s.),

1 2

3

4

5

9

8 76

lMPORTANTf: When using the keypad to enter ades and mmmands,*queniial key depressions must ba made widdn 3 swonds of one another,If 3 seconds elapses without a key depression, the ent~ is abmtad andmust be repeat~ from its kginning.

-6-

FIRE ALARM SYSTEM OPERATIONNORMAL STANDSV OPERATIONVour tire alarm system is on 24 houm a &yfOrWntinuous protwtion. It will provide thefollowing visual and audbfe indicationswhile in the normal standby mode (i.e.: noalarm, supewiso~ m trouble conditions arepr~ent)t. The console sounder and all external

tire soundem will b silonmd

IN CASE OF A FIREIn the event that a fire emergency omum,the strategiwlly Iooated smoke and heatdet%tms will automafimlly send signals toyour control panel which will trigger theindications descdbed below, Should youbecome aware of the lire emergencybefore your detectoffi sense dm problem,go to your nearest console and manuallyinitiate an alarm by prewing the ~nic keypair assigned as FIRE EMERGENCY (ifprogrammed by your inswller) and holddown for at feast 2 seconds. When fireafarm sounds are heard, evacuate allomupanb from the premism Immediately.

SILENCIN@RESETTING FIRE ALARMS1. To silence the consolo and external

sounder fire alarm sounds, enter yoursecurity code and press the OFF [i]key, The display window will continueto display the numbm of the zone(s) inalarm and will also display “FIREALARM SILENCED to indi-te that afire alarm condition may still bepr=ent.

2,

3.

1.

2.

3,

2.

The console green POWER indimtorshoufd be It Indimting that AC pwer ispresenthe mnsofe dsplay window will dispfaya message such as .XVZ ALARMCOMPANY (m “DISARMEO - READYTO ARW it your system providesburgfary protection) which isprogrammed by your Installer atInstallation time.

The console sounder will produ~ anintermpted sound and the external finsounders will produce either aninterrupted m a continuous sounddepending on what was selected byyour Installer at instillation time,The console display window will displaythe word .FIRE. and the number andalpha ~suiptor of the zone whi~ ISinalarm, The display window willsequence tirough other zone numbersif more than one zone Is in aim,

An alarm signal wilf be sent to acentral monitoring station (if yoursystem was installed with thisMWbihty),

To reset your smoke detectors andclear the console alarm dtspfayindi=tions, fimt lo~te and mmeot thecause of th9 fire alarm mntition ~,e,:reset pull stations, fan, smoke out ofsmoke detector chamber, etc.) andthen reenter your user ctie + OFF [1].

NOTE: Detectors will not reset and thealarm display will not clear while the fireslam contition remains,

-7-

FIRE ALARM SYSTEM OPERATIONSUPERVISOR CONDITIONSIf your building has a fire splinklef system installed, your installer may have instslled asensor wfdch monitors tie sorinkler system (i.e.: 10determine whether the main water oafevalve is open or hat Mere is’adsquati wi!e; pressure, etc.). When the control panel “del~cia fault on lhIs sensor, it will provide an audible and visual .supewisory. intimdion asdeswibed below, When this indimdon Wpeam, CALL VOUR INSTALLER FOR SERVICEIMMEDIATELY. The audible indimtion QO k silenced = deswibed b610w,Other conditionsfor whi& your systsm might require sewice are desctibed in the “TROUBLE CONDITION9s%tion near the end of this manual,

1. The console sounder will produce a 2.r~id beeping sound The external fir%sounders will not be on. The oonsole 3,display window will display .SUPV”alwg with the number and alphadescriptor for the zone wtich has thesupewlso~ Mndtion. A msssage willbe sent to tie centml monitoring sbtion

Press any key to silence the consolesounkr

To clear the console dsplay, fimt haveyour installer correct the cause of thesupowiso~ condition. Then enter your$ecutity code and press the OFF [1]key, NOTE: the display will not clearwhile tie cadktioo remains.

~t your system was ins~lled tith thisWpaMfiiy)

SYPASSING FIRE ZONESNOTE: A8k your installer N vour syalem wee ael up to allow fire zones 10 bebypase~.Tfds feature is used 10di=ble the mbnitoting of one or more fire zonos when, for example,the smoke detwlom on a zone we m be sewiwd. If enabl~, this feature can only k usdby a m=ter user. Your system also allows other system” zones and system” outputswhich are related to your tire protection tobe bypassed. See BYPASSING sYSTEMZONES ANO SYSTEM OUTPUTS’ in the .COMMON FEATURES’ section Ior moreinformation.1. Enter the master code. Then press 3.

BYPASS Ie] and enter Omnumber(s) ofzone to be bypassed. All single digitzone numbem must be pre~ed by azero (e.g.: enter 01 when bypassingzone 1) 4,

2. All bypmsed zonm will be &Wentiallydsplayed when you are finishedentering the number zones to bebypassed. The console will thandisplay a bypass message as aremi”de, that o“e or more zones isbypwsd,

Zen= which have been bypassed @nh dsptayed by entering any cok andthe” pressing the BVPASS [6] key.Bvpwsd zonas will then be &splayedsequentially.All tire zone bypasses are removedwhen an OFF sequenrn (semrity ctie+ OFF) is Wdormed.

-s-

FIRE ALARM SYSTEM OPERATION

ACTfVATfNG A FIRE DRILL TESTUse this test 10 activate the external ffrebelle for the purpos~ of conducting a firedfltl. Thfs test an only be performed byyour installer or by tie master user andshould be conducted at a frequencydetermined by the Ioml authority havingjurltiction. The fire a“d b“rglmy prtio”$of your system will continue to beoperational for alarm signaling while thistest is active Of burgla~ protection isins~lled, Wis test must be run with thesystem dsarmed). Use the following stewto pedorm this trot.

1.

2,

3.

Enter the master wW, Then press the[#] key followed by the digik .69.,The wnsole will display .FIRE DRILLACTtVP md the etiernal fire bells willprOdu= eltier a steady or Inmrwptedsound (dependtng on what yourins!aller sefected at Installation time)wh!le tis test ISacWe,Turn off this test by entering my uwfscode and pressing the OFF [1] key,Your system will automaticallyIerminate this test if a fire alarmrendition is &letied.

1~1PRE~ #ENTER 69 FORFIRE DRILL

-9-

BURGLARY ALARM SYSTEM OPERATIONCONSOLE BURGLARY FUNCTIONS1

2

3

4

5,

6,

7.

ALPHA DISPLAY WlNDOW:A2-line,32-oharacter Liquid CVstal Display(LCD), Displays protection pointidentification and system s!at”smssags, and user insvuctions,

OFF KEY: msmmstie burglavpofiionof the system, silences alarms a“da,utiible trouble ind,catms, a“d clearsvisual displays after the probfem hasb-n mveded,

AWAY KEY: Completely arms bothperimeter and interior burglaryprotection for backup protection bysensing an intruders movementsthrough protwted interior areas % wellas guarding doors, windows, etc. Latealtivals wn enter tirough an enby @layzone without musing an alarm if thesystem is disarmed before the entrydelay time expir%,

STAY KEY: Arms the perimeterburglary projection, guarding doors,windows and other perimeter prot%tionpoints, and sounds an alarm if one isQPnA. Interior protection is not armed,Late ativals Mn enter through an entWdelay zone without -using an alarm ifthe system is disarmed beforo the enoydelay time expirm,

7EST KEY: Tmtsthe burglary $ystemand burgla~ alarm sountir if disarmd,

BYPASS KEY: Removes individualprotection zones from being monitoredby lhe system. Displays previouslybypwsd protwtfon zones,

CHIME KEY: Turns on/off lhe CHIMEmO& so thar any enW tirough a delayor perimeter zone wtile the system isdisarmed causes a tone to $ou”d af theConsole(s).

6

9.

10

11

12

13

f4.

15,

16.

# KEY: Permits ARMING of thesystem without use of a sewrify ctie~Quid Arm., if programmti to h soat inshllation time).

KEYS O-9: Used to enter yourindividual WCUriY rode(s),

CODE KEY: Allows the emfy ofadditional sewrity codm that can beg~en to othm users of the system.

READYKEY: When &prSstipriorto aming the system, tie wflsole wildisplay all faulted zones. This key witlalso display all zone desoriptms thathave been programmed for yoursystem, by holding the key down forat le*t 5 sWOn*,

INsTANT KEY: Arms in mannersimilar 10 STAY mode, bul turns offthe entry delay period, olferinggreater secufl~ while inside and notexpecting any late arrivals, An alarmwill ~ur Immediately upon openingany perimeter protection point,including entV @lay zones,

MAXIMUM KEY: Arms in mannersimilar to AWAY retie, bulehminatesthe en~ Alay pried, thus providingmaximum protection, An alarm willNcur immediately upon opening anyprotmtion point, including enlw delayzones,

POWER INDICATOR: (GREEN) Litwhen primmy power is on, If off,Symem is operating on its backupbattery power, CALL YOURINSTALLER IMMEDIATELY.ARMED INDICATOR: (RED) Litwhen the system has been armed(STAY, AWAY, INSTANT or~XIMUM).

INTERNAL SOUNDER: Source ofaudible internal warning andconfirmation sounds, as well asalarms {see .Summa~ of AudibleNotiticmions”).

-1o-

1 234

\ \\

\\ \

I\

kh

Ill - *8

16

9

15 14 13 12 11 10

-11-

BURGLARY ALARM SYSTEM OPERATION(IF INSTALLED)

CHECKING FOR OPEN BURGLARV ZONESBEFoRE ARMING YOUR SYSTEM, ALL PROTECTED DOORS, WINDOWS ANDOTHER PROTECTION ZONES MUST SE CLOSED,

PRNEDURE1. ifthe Not Ready meSageisdisplayW

prior to aming, check for open zonesby depressing and releasing theREADY [*] key (do not enter oodetint),

2. All open protection points will be*splayed. Thwepoink must beitherclomdor byp%sed before tie systeman be amed. The Ready messagewill be display~t when all proloctlonzones have been either closed orbypmsti.

DISPLACING ALL ZONE DESCRIPTORSThe Alpha tinsole wn also display all thezone descriptors that are programmed inyour system by pressing the READY [*]key and holdlng down for at least 5s%onds. Theabbraviated instructions forthe READY keywillappearfhst, followedby the desctiplors programmed for yoursystem. Displaying alldasmipfom is usefulwhen younead lo know thezono numberof a particular zone, as when bypassingzones.

t NOTE: All or pact of this message maybe repla~d by a customized messageprWrammed by(~insMller, ~arthisinmind whenever the I“structio”s fo, theAlpha Console indicate that the.DISARMEW or .READY mes=ne will bedisplayed

PREsS & RELEASE TO DIPtiV FAULTED ZONESPRESS &HOLD FOR5SECST0 DlSPUYZONE DESCRIPTORS

-12-

BURGLARY ALARM SYSTEM OPERATION(IF INSTALLED)

BYPASSING BURGLARY PROTECTION ZONES(USED FOR ARMING SVSTEM WITH ONE OR MORE ZONES SELECTIVELYUNPROTECTED) This feature can b u+ by a master, manager or opwator A U8W.

1,

2,

3.

4,

5,

PR~EDURESvstemmust bdiwrmdfimt. Enter6&unwCole.

Press BYPASS [6] and enter ZoneNumber(s)of zones to be bypassed(e.g.,01,02,03, eto.), lmvrlantl Allsingle-digit ‘zone numbers must bepmm~d by a zero (example, enter 01for zone 1).

When finished entering all zonenumbers to be bypassed, wait forbypassed zones to be sequentiallydsplayd before arming.

QUICK SYPASS FEATURE:To automatically bypass all opon(faulted) burglary zones, enter thesecurity code, then press SVPASS,tien prms tie [#] key.

The Sypms m-sage will be dsplaydindicating the presence of one or morebypmsd zon%.

Arm tie system as usual. Bypassedzones are unprotected and will notcause an alarm when violated wtilesystem is armti.

DISPLAYING BYPASSED ZONES(For determining what zones have beenpreviously bypx~d)

1. Enter security code and pressSVPASS [61.

2. Wait for all bypassed zones to beMquentidly tisplayd.

3. Bypassed zones can be displayedregardless of whether the system Isamed or tismmed.

UMITAmONS. Non-fire emergency zones (except

key~d zones) ~n dw be byWS9d. Arming tie system before bypassed

zones are displayed nulfifies allby~sms,

NOTEAII burglaw zone bypasses areremoval when an OFF %quenm (swurityrn~ plus OFF) ISwtiom*.

N ENTER CODE~ PRF%9 Er . . . SYPA*

/ / ‘ PRESS # FOR

- &#& ‘

QUICK BVPASS

-m.

-13-

BURGLARY ALARM SYSTEM OPERATION(IF INSTALLED)

ARMING PERIMETER ONLYSTAY: STAYING INSIDE, EXPECTING LATE ARRIVALSINSTANT: STAYING INSIDE, NO LATE ARRIVALS EXPECTED

PRWEDLfREt

2

Enter the secutiw code when the 3. The armed state message will beReady mm~ge is displayed, displayed, accompanied by Ihree

Press the STAV [3] or INSTANT [7] beeps from the Console. Exit delay

key, depenting on arming mode beains UI programmed, a slow beephg

desired, will sound throughout the exit delaywriodf. Perimeter orotwtion is in elfedimmeialely, exmpt enW delay zone ifSTAV key is prewd.

II

IJ [1

STAY KEY RESULTA!ms sensors guarding doors a“dwindows, with entry delay on, Lste artialsmn enter through the entry delay zonedoor and dsarm the system within theentry delay period without ausing analarm. See your installer for actial delaytimes set for your system. Alarms willoccur instantly when any exteriorprotection point is violated, except theentry ~lay zone dool, which will activatean alarm if the system is not dsarmedwithin the entv delay period. Interiorprotection poin~ are dsarmed to permitfreedom of movement throughout theinterior.

-14-

INSTANT KEV RESULTArms sensors guarding doors andwindows, witi entw delay off Alarms willoccur instantly ‘when. any exteriorprolecfion point is violated, including !heentry delay zone d~r, Interior protectionWints are disarmed to permit freedom ofmovement throughoul the interior.

BURGLARY ALARM SYSTEM OPERATION(IF INSTALLED)

ARMING ALL PROTECTIONAWAW NO ONE INSIDEMAXIMUM NO ONE STAVING INSIDE, MAXIMUM SECURITV

PROOEDURE1. Enter the secutity code when the 3.

Ready mm=go lsdisplaysd.

2, Press the AWAV[2] orMAXlMUM[4jkey, depending on arming modedwired.

The armed mate message will bedisplayed, atimpanied by wo bsepshomthe Console. Exilblaybsgins[itprogrammed, a $Iow beeping willsound throughout the exit delayPriti]. Complete system pmtwtwnisin effect immediately, except ent~@lay zone if AWAY key is prssssd.

AWAY KEY RESULTArms all perimeter and interior sensom,with enVdeiayon. You mayexitdutingthe exit delay period and reenter throughthe en~ delay zone &or (and dsarm thesystem within the eny delay period)without causing an alarm. See yourinstaller for adud delay times set for yoursystem. Alarms will occur instantty whenany protection pant, intetior orexterior, isviolated, exapt the en~ delay zone &orif AWAY key pressed, wfdch will activatean alarm if the system is not disarmedwithin the eny delay perid.

MAXIMUM KEY RESULTArms all perimeter and interior sensors,with eolty delay off. Voumayexil duringthe exit delay pedod, BUT almms willtdgger instfntly upon ree?teting, or whenVY prOtschonpOtnt, interlororextenor, isv!o!ated. Ttis mode is suggested whenthe premises will bo vamnl for extentidWrio& of time such as vamtiws, etc., mwhen no one WIII be moving throughprotssted intetior areas.

-15-

BURGLARY ALARM SYSTEM OPERATION(IF INSTALLED)

DISARMING THE SYSTEMANDSILENCING BURGLARY ALARMS(FOR AWAY, STAY, INSTANT, AND MAXIMUM ARMING)

PROCEDURE1. Enter swurity co*andpress OFF[l], RESULT

The Ready message will be dlsplayd Any alarm sounders will bs silenced;and the console will beep once to ALARM and zone descriptor (if tisplayed)confirm that the system is disarmed, will clear only when the open sensor isunlms m slam has mumd. dti,

2. lfanalam h~omnd. note tiezone A{im alarm is indicated by a display ofdesuiptor displayed end repeat step 1 kth FIRE and the zone d=criptor on tieto mstere the Ready message display. Console, These will clear only when theIfthemessagewlll notdisplay, go to fire zone is again inwct.the dsplayed protection zone and Seeremedy the fault (clme wlnbws, etc.),

SUMMARY OF AUDIBLE

N tie fault annm be remdled, notifyNOTIFICATION section for information

tie dm awn~,which will enable you to distinguishbeWeen FIRE and BURGLARY alarm

ENTER CODE & PRESS OFFTO DISA~M SYSTEM

ENTER CODE &< PRESS TEST

TO STARTBURGLARYTEST

> ENTER CODE&PREsS CHIMETO TURN ON/OFFCHIME MODE

DURESS CODE(WHEN FORCED TO DISAflM/ARM UNDER THREA~

Enter tiepre.assignd duress rode, The ~system will dlsam (w m), but w silmtiy . ~scodis useful onfywhe”mn”%tednotiv the wntial stition of your sitiation, if to a anval s!ation.hat sewiw has ken providti.

-16-

BURGLARY ALARM SYSTEM OPERATION(IF INSTALLED)

CHIME MODE(THIS FEATURE IS FUNCTIONAL ONLY WHEN THE BURGLARY SYSTEM ISDISARMED)

YOUr system can be set to aleti yo” to theopening of a door or window while it isdisarmed by using CHIME mode, Whenactivated, three tones will sound at theConsole whenever a door or window isopen8d, andthe Not Ready message wiltbe displayed, Pressing tie RmDY [*] keywill display the opn protmtion poinb.

Noto that Chime mode can deactivatedonly when thesystemismsarmd,

To turn Chime Mode on, enter thesecutity code and press the CHIME [9]key. The CHIME MODE ON message willappear fOr about MO seconds the”dsappar. To display this mmsage again(to determine whether time mok Is on oroff), simply press and hold down theCHIME key for 5 s~nds,

To turn Chime Mode off, entar theWWflV CO* and pr%s the CHIME[9] keyagain, The CHIME MOOE OFF messaaew~ll appear for about WO seands th~ndsappear.

TESTING THE BURGLARY SYSTEM(To SE CONDUCTED WEEKLY)Thla feature -n h U4 by your Inalaller or by the master or menagat UIW. Use thisteat to chaok that sensors on all burgla!y and non.fire emergency zones aroopwatlng proprly. Not% If you fault a tire zone, you WINoau- a ffre alarml

1

2

3,

4,

Di%rm tie system. 5

Enter a master or manager code andprms tie TEST [5} key,The external burgla~ sounders willsound for 3 semnk to indicate that thete8t has started, The console willdiSPlaY ”SURGLARY WALK TEST IN aPROGRES andwillbeepeveW 15s%onds wtila he test remains actbe,Open and close each protected doorand window in turn. Each action

Walk In front of any interior motiondatactors (if usad). Listen for threebeeps as tha detaclor sensesmovement, The idontifimtion of thedetector should appear when it isaotivated,Whan all protection points have beenchecked, there should be no zoneidontilication numbers displayed, II aproblem is experienced with anvprotection point (no confirming beep;,no display), CALL FOR SERVICEIMMEDIATELY.should produce three beeps from the

Console, and the identifimtion of eatiprotection point should appear on fhe 7. Turn OffBurglaV Walk Test mode by

dsplay. entaring any security code andpressing the OFF[l] key.

-17-

FIRE & BURGLARY COMMON FEATURESVIEWING CENTRAL STATION MESSAGESUsem of the system may periodically Press and hold down the [0] key for 5mwlve messagm w their dispay ffimens seconds to display the messagefrom thelrmonimring agency orinsbllor, kansmitted to you, The message couldWkn a mmsage Is wailing to be viewed, bke up to four sorwns to display all thetie mesmge shown blow will W~ar, lnfomaUon available,

m

PANIC KEYS(FoR MANUALLV ACTIVATING SILENT AND/OR AUDIBLE ALARMS)There are three poseible comblnationsofpdred keys that are installer programmableemergency tinctions. %eyourlnsbller forthe functions that have bean programmedfor these emergen~ key paiti, Typicalfunctions that might be programmed areSi19nt Poli@, Audibl~ Pohce, pernonaIEmergency, and Fire,

To u8e @Panic tincllon, simply pr~sboth keys of theasalgn~ pair allheseine Ilme end hold down forat leaatWO @tinde.

PANIC KEV FUNCTtONS:(Fill.in box for pmic tinotion)

D KEV[*] + [#](zono99)

a KEV[*] + [1] (zone 95)

n KEV[#J + [3] (20”.96)

RESULTIf programmed for silent emergeny by yourinsteller, and the system is connected to amntralalmm monitoring sktion, theplimemergency key press will send a silentalwmslgnal totiemntal station, but therewill be no audble alarms or visual dsplays,If programmed for audible emergency byyour Installer, a loud, steady alarm willwund al your console and at a“y externalwunders hat may be wnnected [ALARMplus a Wwription would also k displayti,

A pemonal emergency alarm key press willnotify ’tie wntral station ~1conneoted) andwill sound at Consoles, but notatextemalblls or alrens.

A fire slam key press will send a fire aIMmmessage to the central station and willuniquely sound external bells and sirensFIRE plus a description would also bedisplayed),

-ls -

FIRE & BURGLARY COMMON FEATURESADDING, CHANGING AND DELETING USER CODESThesyslem allows upto994digil user admtobeprWrammed. When programmed,each rndeis~signd anauthon~level wtich&teminm he system tinctions that codcan petiorm. Theream six authori~ levels as kstedin the table below, Mde hom yourinstaller whoprograms cods atinskllation time, Ihesystem allows master and managerlevel usem to prWram cties on an “as nwd~ bmis, for use by those who nmd Iimit@andlor temporaV contiol over system o~ration,Lavolmhle AtWOl=rm Sllem(

au~law Alams, Supv Swutiy Z..-Symem

Mdos& TrouNa cd-

t.hs!er yes yes yes,levels2-6 ye$, bu,g yOS,burg,onk zones(andfire walh10S1,fl,e

zones il drill

:9 I AddIchang. Is ypss 1A Ctlvate Test [

12 I I I I enabld) I

.Mnager I yes 1 yes I yes, levels 3.6 I yes, burg

Iy99,burg.

I I I only [ zones.nYy walktest3.OW,alorA y~~ I yes no yes,b.,glaV no

----- only--, t 1 ..!,.,

4.op,.tor B yes yes .0 [ no [ ,105.OmratOrC yes,mn dl~rm yes no no no

onb if usti to arF I6.Duress ves,wnds silent

1 janic reprGenernl Rules on Authorlly Leve18 ano cnangea. -.

,,,,, , 1 1t yes no no no

11. . . .. . . . ,.

. a master or manager user may only . I ho only way to assign a user,sadd, delete or change users to/horn a authority level is by using the .Add Alower aulhoriV Iovel o.e. a master ~n Uwr. prmdure descdbti later.assign a lower level user code, but . hfore 33signing a ctie, b3 sure it tiesannot 33sign another master MA). not conflict witi tie DURESS m~.

. Each user is assigned a 2-digil user . You may view your authority level bynumber (single digit user numbers must entering your usm m~ + [*]+ [*].be prwdti by a “W, Ex. 03,04, etc.), a4-digit user cde and an authotiV level,

IMPORTANTI: During user edit mode, all consoles exmpt the one being used will dsplay.User Edt Mob - Please Smnd Sy”, and key depressions (except Panio) at those mnsoleswill be ignor~. Panic key depressions will muse an alarm and terminate user enW. To exitUser Edll Mode, press either [*] or [#], or tin’t press any key for 10 Mm,

To Add a Usenf. Enter Mater or Manager ctie,2. Depress CODE [8] key.3. Enter a new 2.dgil User Number,4. Enter 4-digit de for that User Num&r,5. The Console will prompt for the authotity

level for this user Enter a number (1.6from mble).

6. The console will display the usernumber and corresponding authotitylevel.

To Mlete a Us-1, Enter Minter or Manager ctie.2. Depress CODE [6] key.3. Enter User Number to k etiminatd.4. Enter Master or Manager code lirst

entered.

5. The system will recognize that the Usernumkr is already in use and will promptwhether or not it should be deleted,Press O (NO) or 1 (YES). II yes, thesystem will delete the authori~ level andall other information about that uwr,

To Change a U-r’s Ctie:1. Enter hster or ~nager cod,2. Depr-s CODE [8] key.3. Enter the user number to have ib cde

hinged.4. Enter the nm 4dgit W6 for that umr.5, The system will rocqnize that the user

is already in use and will promptwhether or not tiIs is a new u~r, PremO(NO), ~e system will anfim that thechange is allowed based onauthorization level, and if so, puts thenew ctia into effect.

-19-

FIRE & BURGLARY COMMON FEATURESTROUBLE CONDITIONSYour systam monibm each of ymr fire and burglmy protection zones and various system~ndilians forpmblemss~ aszonewlre breaks, Iossof AC power, faulted telephoneIims, etc. which an mmpmmise proper slam signal~ng oparation, When your systemdetacba problem, ilwlllpmvi~ anaudibfeandvisuat .&ouble. indmtionasdescrib@belw, When one of the= indications appeam, CALL YOUR INSTALLER FOfl SERVICEIMMEDIATELY. ~ atible Indmtim m be stim~ ~ desotibd b@low,1. The wnsole sounder will produ~ a 2. Press anykeyto sllencethoconsofe

rapid beeping. The extmnal fire (and sounhr.burgl~) soundem will not be on. The 3. To clear the mnsole Imuble display,Wnsole display wintiw will tisplay one firm, have your installer locate andof the following m=sgOs: mmect the cause of tie problem, Then

. “AC LOSS. when ACpower has been enter any u~r cob and press the OFFinterrupted. The green console [11key,POWER indmlm will also& off, NOTE: The dsplay will not clear while tie

. .SYSTEM LO BA7whenyoursysiems kouble condition remains.back-up bafle~ is low.

. .COMM FAILURF when attampktosend a message to the centralmonitoring abtion have failad.

. “CHECWaHmpanied byaprot~Uonzone number (144) or a symem zonenumber (70-,99) and an associatedalpha desor{ptor when them Is aprotection or.system. zone problem.See the section “BYPASSINGSYSTEM ZONES AND OUTPUTS fora list of zone numbers resewed fordisplaying system problems.

-20-

FIRE & BURGLARY COMMON FEATURESBYPASSING SYSTEM ZONES AND SYSTEM OUTPUTSNOTE: Ask your lnstallerif your oyslem wassel uptoallow system zones andsystem outputs to be bypasd.Your system mayallow youtobypass amin “system zones. wfdch monitor variousaspects of system status and mnaln system outputs which annunciate system status,These zonos and outpuk are fistd blow. This feature is used to disable the monitoring ofone or more system zones or to disable the o~ration of one or more system oufpuk when,forexample, thesystem istobesewiced obtested, llenabled, this feature ~nonlvkuwd by a mxter user.

zone #70: monitors thesupewision sktusof the bell 1 outpulfifenabled at installation lime), Bypassingthis zone disables the ope,ation a“dsupwisioq of the bell 1 output,

zone #71: monitors thesupewision shtus of the bell 2 output Ofenabled at installation time), Bypassingthis zone disables the operation a“dsu~wision of the bell 2 oumut,

zone #72: monitors the pane~sfield witing to determine it a shoe to eatiground exists. Bypassing this zonedisables eati ground fault mo”itoti”g,

zone 873: monitom devius thatyour ins~ller has connedti to input 1 onthe main PCBJ2co””ector (s”ch as abackup AMRMNET radio transmitter),Bypassing tiiszone muses the systemto ignore the status of ~viws connsted10input 1.

zone #74: monitors thesupewision status of the main dialerou~ut (if enabled at installation time).Bypassing this zone disables theoperation and supewision of the maindialer output,

zone #75: monitors thesupwision status of the hck.up dialeroutput Of installed and enabled alinstallation time). Bypessing this zonedisables the operation md s“pewisio”of the ba~-up dialer output.

zone &7e: this zone isassigned to tha auxifimy relay output.Actually, this zone does not monitoranything sinw tie auxih~ relay outputIsnotsupewised, However, bypassingthis Z0n9 allows the operation of theauxiflary relay output to be disabled.

To Bypaas a System Zone or Sy81em Oulpul:1. Enter the master rode, Then press 3,

BYPASS [6] and entar the number(s) of,.zone to b bypassd,

2. All bypSsed zonmwill basquentiallydisplayed when you are Iinishedentering the number of zones to be 4,bypassed, The consofe will thandisplay a bypass message as areminder that one or more zones isbyp=sd.

zone #77: this zone isassigned to the ALARMNET radiowigger outpub. Actually, thiszo”ehasnot monitor anything since theALARMNET Mggdm wa not supwised,However, bypassing this zone aIIOWStiaoWration of the tiggem to be d~bld,

Zonas wtich have been bypas%d wn& displayed by entering any user deand then prewing tha SYPASS [6] key.Bypmsd zones will tien be dispfayedsequentially.All system zone byp=s% are removedwhen an oFF sequenw (rnde + OFF)is performed,

-21-

QuTUNCT10f4

hmk Faultdzones~splav AN

*Sy81em(It insmlled)

Dmrm B“,glwSvslem antiorSilenw Ala,ms~y~ss zones (tire,burg h systemzones)

Ouich Sypass

dlsplsys,Enler user&e, PWZZSYPASs [6] Bypass@zonesareunpro!wld andEnterzonenumbrs to M bypasq will “o! muse en slam II fa”ltd.(use2.tigil entries), Burglav zones mn h bypassti bvToremovebypasses,enterctie + an opremr “A. or higherleveluse,OFF[l], only,Ifenabled,theandsystem

zonesmn onlyk bvpzssd byamaster u8er,

inter user tie, Press BYPASS [6}Press [a]

SYPSS3RSall faultd zonesautomatimlly,

ro remove bvpames, en!e, tie +OFF[1],:nter my user rode, Prew CHIME Console will w.nd If dmrs or

91. wlndws arevlol?td while burgla~~ewal 10mfn Chime Mtie off, I $yslemdlswmW.:nlef master or manager de, P,e.. 1. .!;,,.,.. . . ...na. ~ou”~er~ ,., ~

rESTi5], “.-, ,.. -,. .,,,:nler mde + OFF [1] to end le8t. non.nresensorstobz t;stoh,:nter master We, PreM #] +69, 1A’chvates external fire sounders,,. . . . . . . . ---r. .rt. resr, enter mae + ut~,

@{essane hold [0] key Ior al least 5 Wssage from mntfal 8!ation willsmnds, ,ppew,En!er any “sefs de, Press [*] +*].

Displays authorry levels assignti [otie us? ctie entered,

rite, master 0, mana~o, &e, P,ess Master and manager level use,s w“CODE [8], Euler “W 2-ti@bUSe, add users 10me Svs!em, each with !tan“mkr, En!er 4.dlOit cWe for !hat Wn tie and a.thotiw level.user. At prompl, en!et autiori~ level,Enler maste, or manager de. Press ~ster and man~ger level users m“CODE [8], Enter users Z.dlglt change their own or other usersn.mb,, E“ler “W 4.digit c~o for &es,fiat user, Enter O(no) al prompt,Enter master or mana~er de, P,ess hstor a“d manager level u8e,8 wnSOOE [8], Reenter master or dele!e users, A uwr -n only bnanaoerS$tie, En!erl fyes)at deletd by a “s., wlti Mhigher]rompt, .“lho,lv !~”el,bless and hold any function key for al Wll displav abbreviatti inst,”ctionsens! 5 sw”ds for me hey pressd

-22-

5140XM EVENT LOGGING PROCEDURESThe system h- the abitity to rword various evene in a histo~ log wherein each event isrecordti in one of five Mtwori= (listed below), with the time and &te of lb owmen=.The Event Log holkup10224 evenk, witi the old=t evenl ting teplawd by the f~gingof any nw event after the fog is fill. Using an alpha wnsate, the Event Log an be viewdone atego~ at a time, or ~n dsplay all events, regardless of catego~ (ALL EVENTLOG), The system also allows selection of displaying the COMPLETE log, or only thoseevenk wurring sin~ the last insmller sewi~ (RECENT). Note that events are displaydin chronologiti order, Wom m~l r-nt to oldest.

TO DISPLAY THE EVENT Lm:

1

2

3

Etttw any user CODE+ [~ + [6] + [0]

%l~t the display rode.

RECENT: Displays only those evtmkoffiuting sin= Imt installer sewice.

COMPLETE: Displays complete eventIW (up to 224 evenk).

U8ethe [3] &[l] keys (for nexl andprevious -tegories respectively) todisplay the ~t~ari~ of evants,

Press [8] Io. sel-l acakgory anddisplay the first event, Press [8] againfor each subsequent event,

IP1 01/01 12:02AM1 TvDiMl Event~BURGLARY C03J L;g Disp/ay

Shows burgla~ alarm wurrti in zone3 (C03), at 12:02AM on JanuaW 1.

4

Altar the Iaet event has beendsplayed, the END OF EVENT LOGmessage appea~ Iora few seconds,then the system automatically dsplaysthe RECENT/COMPLETE mode selectsamn again (see step 2).

To EXIT tha EVMI Log:Press [*] at any time.

ALARMEVENTL~Usplays timo and date for zones that hweeitior mud and~m or have&n res!or~.CHECKEVENTLOODisplaystime and dale for zones tint haveMusti a Voubleor fife $UWWIWWmdtion,

BVPASSEVE~ L~Displaystime and dale for zones hat have&n bypa-d.OPENEVENT1~Displaystime,date andusernumberforeatiarmingwd dkacmingof Ihesyslem

SVSTEMEVEW L~Usplays !ime and date for systemproblems,suchasACLOSS,IW bamw, etc.,

ALL EVENTL~Msplays all categories of events in&ronolqlml order.

-23-

—

SUMMARY OF AUDIBLE NOTIFICATION

YSOUNDOD, I R El

COnsde & extemaPLOUD, CONTINUOUSConsole & externalONE SHORT B EP(not repealed)Console only

I Co”soleo”,y

rTHREE SHORTBEEPSConsole only

rRAPID BE INGConsole only

rSOWEPNconsole Only

(ALPHA DISPLACAUSEFIRE ALARM

SURGLARY/AUDIBLEEMERGENCY ALAR\a. SYSTEM DISARM

b, SYSTEM ARMINGATTEMPT WITH ANOPEN ZONE,c. BYPASS VERIFY

SYSTEM 1SINBURGLARY TESTMoDEARM AWAY ORMAXIMUM

a, ARM STAY ORINSTANT

b. ZONE OPENEDWHILE SYSTEM IS INCHIME MoDE,c. ENTRYWARNING+”

a. FIRESUPERVISORY

b. TROUBLEc, AC POWER LoSSkLERTa. ENTRY DEM YWARNING.*

b, EXIT DELAYWARNING:if pr~rammd)

>e programmed byut always produce in

~Fire alarms maexternal sounds;

‘“ EnlW warning may consist of three sh(as programmed by your installer.

CONSOLE)DISPLAYFIRE is disolavod bswi~to, of ~o”a inalarm is displayed,AURM is dsplayed; &stiptor of zO”cin alarm is atso &splayed.a. DISARMED/READV TO ARM isdisplayd.b, The numkr and &smiptor of theown prot%tion zone is dsplayd,

c. Numkm and &sctiptoffi of thebypassd protection zones aredsplayw (One bmp is heard for’eachzone dsplayed). Subsequently, thefollowing is displayed DISARMEDBVPASS Ready to ArmFaulted Zone identifications will appear.

ARMED AWAV or ARMED MAXIMUMis displayed, Red ARMED indimfor istit.a. ARMED STAV ZONE BVPASSEDorARMED INSTANT ZONE BYPASSEDis &splayed. Red ARMED ind~tor istit,

b. CHIME dsplayed, dosctiptor of ownprotection zone will k display@ if the[$1 key is prosed.c. DISARM SVSTEM OR ALARM WILLOCCUR is displayed.a. SUPV displayed. Descriptor of faulted,“.. i, d..t...d-r-,---b, CHECK dispfay~. Descriptor oftroubled protection zone is dsplayti.c. AC LOSS disDlaYed(may alternatewith other displays“that‘may k present),a. DISARM SYSTEM OR ALARM WILLMCUR is displayad. Ex@W”g thadelay time without disarming musesalarm,b. ARMED AWAY or ARMEDMAXIMUM is dsplayti along with VouMay ExII NOW>ur installer to produce continuousrruptd mnsofe sounds.beeps or slow continuous beeping,

-24-

GLOSSARYARM/DISARM:“Arrow simply meansthat theb.rgla~ por!ion 01your sys!em is Iurnti ON andis in a state 01rea4ness. “P,WmW means batthe burolaw system Is lulnti OFF, and must Wrearmed to home operational. Hmaver, evenin a ‘dlsalmeC slate, ‘emergency. and .Iire”pftions of your system are still operational.

KEVPAD: Ttis is tho area on YOUIConsolewntaining numbered pushbuttons similaf to!hoseon telephones or calculators. These keyscontrol tie arming or tisarming of the system,and peflocm other functions which werepreviously de%flhd in lMs manual

DELAV ZONE An area of prolmtion containingdoors most frequently used to enter or exit(WPiCOllY,a front dwt! bath dwr, or dw, hom thegarage Into the buildlng). The delay zone allwss. ffitient time Ior authodzed entw or exil withoutcausing . . alarm. Consull your Installer lo? theentw and exit delay times that have bmn WI foryour system during installation.

DAVINIGHT ZONE An area of pro!miion whoseviolation muses a trouble indication during medsarmd (DAY) mode md an d.rm duting *.amd (NIGHT) retie.

FIRE SUPERVISORY ZONE: A zone wfdchmonilols a fire spdnkler system to detemine *atmain water valve is open or lhaf there isadquate waler pfessure.

BVPASS: To disable a spcific area of firo orburglaw protection while leaving other areasoperational. Also, IO ti=ble the operation of aspecific system output cifcuit such as a bllOutOut.

ALPHA DESCRIPTOR: A zone description (UPto 3 words) such as .WEST WING SMOKFwhich is displayti along wi!h me zone numberon Ihe console dsplay window when a zone isfa”ll&.

ZONE: A spwific area of protection.

-~10 ... .... . . . . . . . ..= . . . .system problems (CALL FOR SERVICE immediately)

Wmice Company:

Telephone:

-25-

“FEDERALC 0MMUNICATION3C OMMISSION(FCC) STATEMENT”

his ~uipment has bwn tested to FcC requirements and has b-n found ameptiblw, The FCC requires the following smtement foryourinfomafio”:

his equipment generates and uses radio k~uency energy and if not inshlled and I,operly, that is, in strict amordance with the manufacturer’s instructions, may CIltetierence to radio and television rewption, 11has been ty~ tested and found to co!ihthelimib for a Class Bcomputing devimin a@ordance with Mes~c1fwation8in5 of FCC Rules, which are designed to provide reasonable protection against storferonm inare$idential installation, However, there isnoguaranlee tiat interfereillno!mcur inapaticular installation. Ilthisquipmem dwscause inteflerenmtortelevision rewption, which can be determined by turning the equipment off and on

;er is encouraged to t~ to comect the intetierence by one or more of the Iolfoteasures:

. lfu6ing anin&oranfenna, haveaquabV outtiora"tenna installd,

. Rmrientt iereceivinga ntennau ntilinteflerencei srdumdore[minated,

. kvetheremiver awayhom theconnollmmmunimtor.

. kvetheantenna leads away from anywire runs totiewn!rol/communicator,

. Plug tiewnbol/communiator into ad fferent outlet sothatit andtiere~ivelon diflerent banch drcuits,

necessa~, the user should consult the dealer or an experienced radoltelavi~nician for additional suggmtions,

le user or Installer may find the following b.ooklot prepared by the Fedommunimtions Commission helpbl: .lntederonm HandkoY

lis booklet is available kom the U.S. Govemmem Printing OffiW, Wasting!on, DC 201:mk No. 004.000-004w-7,

?eu8er shall not make any changm or moditimtions to the equipment unless author, tie Insulation InsWotions or User,s Manual, Unauthorized changes or mtificat!uldvoidtheuser+s authority tooWrate the equipment,

IN THE NENT OF TELEPHONE OPERATIONAL PROBLEMSIn the event of telephone operational problems, disoonn%t the control by removiW t~ plugfrom the RJ31x wall jack. We recommend that your wrfified installer demonstratedisconnecting the phones on installation of the system, Do not disconnect thepho”econnection insihtho controffmmmuniwtor. Doing sowillresult intheloss ol your phonetines. If the regular phone works correctly after the control/mmmbniwtor has beendiswnnectd kom the phonw Rnes,he wnboVmmmunimtor h= a problem and should &returned for repair. If upon dismnnection of the convollcommunicator, there is still aproblem on the line, “oti~ *S telephone company that tiey have a problem and requestprompt repair sewim. The umr may not undr any circumstances fin or out of warranty)attempt any sewice or repairs to tie system. [! must be re!uro~ to the factory or anaufhoriz~ sewim agency for all repairs,

-26-

bypassanal~r~ sensoror dsco;?wt an alarmwarnin~>evim.Intrusionde!ec!ors(e.g. p%slve Infrard detectors),smokedelwto:s, and manyother Sensin(devices will not wofk without wwer. 8atww opra!~ devices will not work without banefies, willdead banetie8, or il the batteries we not put in propady. hvice$ pweced solely by AC will nowork if their AC wwer supply is cut off for any reamn, however briefly.SiOnals sent by wireless !Iensminers may b blwkti or rell%tti by metal before tiey reati Ihalarm ,eceivef. Even if the signal path h= ken :mendy timkd during a wmkly test, blwkag$can recur if a me!al obj%t is movd into the path.A uwr may not b able to ream a Wnic or emergenq bullon quic~y enough.While smoke delmlora have playd a key role in rduclng residential tire deaths In tie UnitwSlates, they may not activate or provide early warnin~ for a varie~ of re8sons in as many as 35%01all fires, a=ordlng to data pubtishti by Iho Fadofal Emergenq Mnagement Agenw. time othe reasons smoke det%tors .s4 In Conjuncllon with this System may not wok ale as 1011w8Smoke detectors may have ben impropdy Inslalled and positioned. Smoke deteclofa may nosense fires that start where smoke cannot (each the delw!ors, such aa In &lmneys, In walls, ormfs, or on the other side of clowd doors. Smoke de!mlors elm may ..1 %nw a fire on anolhelevel of a residence or builting. A mmnd Ilmr de!%!or, for example, may no! sense a tirsl Ilmr obasement fife. Mfeover, 8m0ke detectors have sensinn limitati0n8. No smoke detector an Senslevev kfldoffire eveVtime. l"oenerd, detW10r8m;y nolabays wa,nahu! ticesmusedb)Carelessness and aale~ hma,d$ Ike smoking In kd, violent exploslon$, es~lng Qw, Imp,opslorage of flammable ma1eria18,ovedoaded OleclriWl circulls, cfdldren playing with matches, oarm.. Dnwndno umn tho nature 01 the fire andlor the Iocatio”s of me smoke det~tors, !htde!ec!o<, even iiit”opera!es 88 .nticlpatA, may ..! p,ovide s.lficien!wafning to QIIOWalmwpa”ls to escew i“ lime !0 prevent lnj”~ or dealh,Passive Inb.,ed Motion Do!eclo,s an only detect I.l,usion whhin the desloned renoes .$tiagrammed in their i.s!allatio” manual. Passive lnherd btec!o,s do not p,ovide vol”metdc are:protection. They do create multiple kams of pro!% tion, and ino”sion m. only be deleclti irunobalrucredareascovered by tho8e bam8. They cannot detmt motion or intf.sion that take!place behind wall$, .eitinQs, moors, closed doo,s, gla8s pa,titlons, glass doors, ., windowshchaniml tampering, masking, Wintino or splaying of any matetial on the mirrors, windows oany part of the optical syslem Wn fduce their detection atihy. Pas3ive lnbaf~ Detwtofs sensfchanges in temperalur% however, as fhe ambient temperature of protw!d area approaties lhftemmratufe range of 90° to 150°F, tho del%lion Wrformance mn decrease.Alarm warning devices such as sirens, bells or horns may not alert Wople of wake up sleepers ithey are Imaled on !he other side of CIOSA oc partly open dmrs. If warning devices sound on edlleren! level .Itheresiden.ehom the bdrooms, thnn they ace Iesshkelyto waken oral.fPople inside Ihe bd{ooms. Even prsons who are awake may not hear Ihe warning if the alarm ismuffled from a stereo, ratio, ai, mndbloner or other appliance, or by pa$8ing traMo, Wnally, alarmwarni.o devims, however loud, may nol warn heafing-lmpairti pple or waken deep sleewrsTelephono lines nwdod to !Iansmit alarm signals from a premi%s 10a central monitoring s!aliormay be o“t 01 semi.. or temporarily .“1 01 sewiw. Telephone knes ar. .180 8.Me.l tc

I compromise by sophislialti in!fbders.Even if lhesy$tem responds to!ho emergency as intended, h~ever, wcupanls may haveins. ffiden! time !oorolect !hemselvesf,om theemeroencv si!”ati.n, In !he-seofam.ni!orm

Lalarm system, auih;rities mayno!rnswnd appropdate~y. .Thlsq.ipment, fikeothe, elmtdcaldevims, i8subject tocomponent lallure. Even rno.ohthi$Wuipment is designed lo Iasl as long as 10 years, the ofoctfonic mmwnents muld fail al any time

The most common cause 01 an alarm system not functioning when an in!<usionoc fire OCC.IS 1$inadequate maintenance. This ala<msys!om sho.ld&test~ Weekly tomake sure all 8en80rsancWansminersa,e woddnQproperly.Installing an alarm system may make one e~glble for lower Insuranm rates, bul an alarm syslom Is not asubsthute Ior insuranm, Homewners, pfoperw owners and renters should wnlinue !0 act prudently irpro!wtino Ihemsebes and mnti.ue to insure tieii fives and plopry.Wecon!inue todevalop nowandimprov& pfotwlion devices. Users of alarm syslemsoweil!cthemselves and thei, loved ones to learn abut lhesedovolop,:le.ls..-

-27-

ADEMCO ONE YEAR LIMITED WARRANTYAlarm Device Manufacturing Company, a Division of Piltway Corporation, and itsdivisions, subsidiaries andaffiMates ~Seller”), 165m\een Way, Syosset, NewYork 11791, warrants ita security equipment (the “product”)to be free fromdefects in materials and workmanship for one year from date of originalpurchase, under normal use and sewica. Seller’s obhgation is timitd to rapairingor replacing, at its option, freaofcharge for pans, Iabor, ortransptiation, anyproduct proven to be defective in materials or workmanship undar normal usaand service, Sailer shall have no obigation under this warranty or othe~ise if thaproduct is altered or improperly repaired or serviced by anyone other than theSeller, In case of defect, contact thesecurity professional who installed andmaintains your aecurky equipment or the Seller for product repair.

This one year Limited Warranty is In lieu of all other express warranties,obligations or liabilities, THERE ARE NO EXPRESS WARRANTIES, WHICHEXTEND BEYOND THE FACE HEREOF. ANY IMPLIED WARRANTIES,OBLIGATIONS OR LIABILITIES MADE BY SELLER IN CONNECTION WITHTHIS PRODUCT, INCLUDING ANY IMPLIED WARRANTY OFMERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OROTHERWISE, ARE LIMITED IN DuRATION TO APERIODOF ONE YEARFROM THE DATE OF ORIGINAL PURCHASE. ANY ACTION FOR BREACH OFANY WARRANTY, INCLUDING BUT NOT LIMITED TO ANY IMPLIEDWARRANTY OF MERCHANTABfLITY, MUST BE BROUGHT WITHIN 12MONTHS FROM DATE OF ORIGINAL PURCHASE, IN NO CASE SHALLSELLER BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL ORINCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHERWARRANTY, EXPRESS OR IMPLIED, OR UPON ANY OTHER BASIS OFLIABILITY WHATSOEVER, EVEN IF THE LOSS OR DAMAGE IS CAUSED BYTHE SELLER’S OWN NEGLIGENCE OR FAULT, Some states do not allowIimhation on how long an implied warranty lasts or the exclusion or limitation ofincidental orconsequential damages, sotheakve Iimitation or exclusion maynot wply !0 you.

Seller does not represent that the product may not be compromised orcircumvented; that the product will prevent any personal iniu~ or propetiy loss byburglary, robba~, fire orothewise; orthatthe producl will inallcasas provideadequate warning or protection, Buyer understands that aproparly installed andmaintained alarm may only reduce the fisk of a burglary, robbery, fhe or otherevents omurring wfihout providing an alarm, but it is not insurance or a guaran.tee that such will not occur or that there will be no personal iniury or prope~ lossss a result. CONSEQUENTLY, SELLER SHALL HAVE NO LIABILIN FOR ANYPERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS OASED ON Ac LAIM THE PRODUCT FAILED TO GIVE WARNING. HOWEVER, IF SELLERIS HELD LIABLE, WHETHER DIRECTLY OR INDIRECTLY, FOR ANY LOSSo R DAMAGE ARISING UNDER THIS LIMITED WARRANTY OR OTHERWISE,REGARDLESS OF CAUSE OR ORIGIN, SELLERS MAXIMUM LIABILITYs HALL NOT IN ANY CASE EXCEED THE PURCHASE PRICE OF THEPRODUCT, WHICH SHALL BE THE COMPLETE AND EXCLUSIVE REMEDYAGAINST SELLER, This warranty gives youspecific logalrights, and you mayaIsohave other rights which vary from statato atate. Nolncrease or alteration,written or verbal, to this warrantv is authodzed.

~

AL~M DEWCE MANUFAS7URINQ CO.AOVSONw n-.” Gmmm,D,

166 Eil-n Way, Syosset, New York 11791

N6020 8/92 Copytight@ 1992 PIWAY CORPORATION