additional documnet - coer
TRANSCRIPT
Self Study Report (SSR) Cycle 1, Year: 2020
Metric No. 3.2.1
Institution has created an ecosystem for innovations and has
initiatives for creation and transfer of knowledge
ADDITIONAL DOCUMNET
The document contains:
1. Incubation center details
2. EDP/EDC cell details
3. Sample events under EDP cell
4. Details of Institute Innovation Council
5. Awards won by SAE-India
6. Awards Won By the Robotics and Innovation Club
7. Copies of certificates of students for participating in different innovation
activities
Self Study Report (SSR) Cycle 1, Year: 2020
INCUBATION CENTER DETAILS
Incubator Registration Certificate
Self Study Report (SSR) Cycle 1, Year: 2020
Registration details for COER INCUBATOR AND INNOVATION CENTER (CIIC)
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Meeting with tides incubation centre IIT Roorkee officials regarding upcoming
startup boot camp at COER
Self Study Report (SSR) Cycle 1, Year: 2020
Notice Regarding Incubation Center
Self Study Report (SSR) Cycle 1, Year: 2020
Notice regarding responsibility of ‘COER Incubation Center’ at COER
Self Study Report (SSR) Cycle 1, Year: 2020
Notice for students
Self Study Report (SSR) Cycle 1, Year: 2020
Weekly progress report is submitted to Director, COER
Self Study Report (SSR) Cycle 1, Year: 2020
Incubation Registration form of student
Self Study Report (SSR) Cycle 1, Year: 2020
Incubation Registration form of student
Self Study Report (SSR) Cycle 1, Year: 2020
EDC CELL DETAILS
Formation of EDC Cell at COER
Self Study Report (SSR) Cycle 1, Year: 2020
SAMPLE EVENTS UNDER EDP CELL
Self Study Report (SSR) Cycle 1, Year: 2020
An Invited Talk by Dr. Rajat Aggarwal
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
A workshop on “Creativity &Innovation for the Budding
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
INSTITUTE INNOVATION COUNCIL
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
AWARDS WON BY SAEINDIA@COER
S.NO Title of the innovation
Name of the Awardee
Name of the Awarding Agency with contact details
Year of Award
1
E-KART SAE-CLUB COER CREDIBLE FUTURE INDIA, BHOPAL
2019
2 GO-KART SAE-CLUB COER LPU CHANDIGHAR 2018
3 EFFICAR SAE-CLUB COER SAE-NIS(UIETChandighar) 2016
4 ATV MEGA CAR
SAE-CLUB COER KALINGA MOTOTS, BHUBANESHWAR
2016
5 EFFICYCLE SAE-CLUB COER SAE-NIS(UIETChandighar) 2015
Self Study Report (SSR) Cycle 1, Year: 2020
NATIONAL ELECRIC KART CHAMPIONSHIP (NEKC-2.0)
AT BHOPAL
The student members of SAE-COER has cleared the virtual round of National E Kart
competition season 2 with an outstanding score of AIR-4. A team of 20 student members
participated in this national level completion which was held during 25-30 March 2019 at
RGVP, Bhopal. The design , material procurement, manufacturing and total assembly of
this vehicle have been done by the SAE student members and the total fabrication of the
vehicle was done in the COER mechanical workshop. The experts from various automobile
sectors appreciated the vehicle made by the COER team.
SAE-COER WON THE FIRST PRIZE IN GO-KART ENDURANCE TEST AT LPU, PUNJAB
International Go-Kart Championship is a global student challenge with a mission of
encrypting students with technical as well as practical knowledge of manufacturing and
building up a go-kart. Twenty student members of SAEINDIA-COER participated in this
Self Study Report (SSR) Cycle 1, Year: 2020
event during 23-26,March 2018 and won the first prize in the most difficult Endurance
test
The mission is accomplished by the ambitions of these students to compete globally. These
techno graduates drove their go-kart on live arena under the team name ZEPHYR with
10,000+ spectators.
SAE EFFI-CAR-2016 - COER WON THE FIRST PRIZE
The student members of SAEINDIA-COER are participated in the national event EFFI CAR
which was conducted from 21-25 of January 2016. In this national level event of SAEINDIA
the students of COER is represented College of Engineering Roorkee under the team name
ZEPHYR . A team of students namely Ritesh Gupta,Nitin Dua, Utkarsh Kasera, Prashant
Binwal, Sumit Suman, Kumar Pushpak and Ankit Raj have designed and fabricated a test
vehicle (Battery powered four wheeler) under the supervision of their faculty advisor
Mr.Thomas Mathew. This test vehicle underwent a series of both static and dynamic tests
at the test track of UIET Chandigargh and became the overall winner of the event by
securing the first position. This project was funded by the COER management and the
complete fabrication was done at COER workshop.
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
ATV MEGA CHAMPIONSHIP-2016
Mega ATV Championship which is scheduled to be held at Bhubaneswar from 3-8 March
2016. The student members of SAE-COER are presently working on this ATV project to
design and fabricate an all Terrain Vehicle as per the rules of SAE guide lines. This National
level event is organised by Auto sports India.30 Student members of SAE-COER have
registered for this event and the project is in its full swing.
Self Study Report (SSR) Cycle 1, Year: 2020
SAE EFFICYCLE-2015
SAE-NIS in a similar endeavour presents a new Milestone in the realm of “Green
Technology” - SAE EffiCycle. Efficycle is an intercollegiate design competition for
undergraduate and graduate engineering students where teams have to design and
fabricate energy efficient Hybrid-human powered- three wheeled-electric vehicles. Sae
india@coer made valiant efforts to prove their mettle yet again by registering in this
national level event. In 2005 COER team ‘Revanta’ finished 36th amount a total tally of 280
teams across India.
Self Study Report (SSR) Cycle 1, Year: 2020
S.No Event Name of the Awardee Name of the Awarding Agency with contact
details
Year of Award
1 CYBORG BREAKING
GAGANDEEP
IIT ROORKEE
2018
2 ROBO-RACE
MR. SURYANSH GUPTA
GURUKULA KANGRI, VISHWAIVIDYALAYA
2018
3 ROBO-SOCCER
MR. SURYANSH GUPTA
GURUKULA KANGRI, VISHWAIVIDYALAYA
2018
4 ROBO-WAR
MR. UTKARSH RAWAT
NIT, UTTRAKHAND
2017
5 ROBO-COURSA
MR. UTKARSH RAWAT
NIT, UTTRAKHAND
2017
6 ROBO - RACE
MR.AMAN PRIYADARSHI
JECRC UNIVERSITY
2017
7 ROBO-WAR
ROOKIE MR.AMAN PRIYADARSHI
JECRC UNIVERSITY
2017
8 COMBAT-DE-
ROBO
MR. UTKARSH RAWAT, MR. VIKHYATH
CHAUHAN, MR. AMAN PRIYADARSHINI
DIT UNIVERSITY DEHRADUN
2017
9 RACE-DE-ROBO
MR. UTKARSH RAWAT, MR. VIKHYATH
CHAUHAN, MR. AMAN PRIYADARSHINI
DIT UNIVERSITY DEHRADUN
2017
10 ROBO SCCOER
MR.AMAN PRIYADARSHI DIT UNIVERSITY DEHRADUN
2017
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Some Innovations of Solar Lab
Thermo-Hydraulic efficiency improvement through
creating artificial roughness in Solar Air Heater(SAH) is
one of trending area of research in the field of solar energy
which conducted through Mr.Varun Pratap Singh with
association of his students team during Summer Internship
Program (SIP) and as well as in final year project under
Solar Energy Centre.
Solar cycle, Solar divider, Solar tree,, Solar tiles, Solar
road, Solar based hot and cold water supply units (with
Peltier effect) and Vertical axis wind turbine for highways
are other on-going projects in the field of renewable energy
on which our students are focusing now days.
Solar Air Heater
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Some Innovations of Biofuel Lab
Self Study Report (SSR) Cycle 1, Year: 2020
Algae are found in abundance in environment and thus algae bio-diesel is considered as a good
replacement to diesel. Moreover, Bio-diesel does not require any separate storage infrastructure
and it is less volatile than petroleum diesel. In addition to this, Oil drilling is a complicated
process, while extraction of oil from algae and later the formulation of Bio-diesel by
transesterification is a simpler process. Thus algae bio-diesel is considered as a cheaper and much
cleaner source of energy.
Keeping in mind all the statistics, increased rate in consumption of fossil fuels and shift of the
world towards renewable energy, an initiative was taken by Research and Development of
College of Engineering Roorkee under the supervision of Professor Dr. Siddharth Jain. Under his
supervision a team comprising of 5 members AbhijeetKothiyal, Mayank Tyagi, ShubhangSoni,
Suryansh Singh and Siddhant Jain produced Bio diesel in college laboratory. The blends of B10
and B20 biodiesel were made and several experiments were carried out at IC engine in the
laboratories of College of Engineering Roorkee and Indian Institute of Technology (IIT),
Roorkee.
On September 17, on the occasion of celebration of Engineer’s day in the college Respected
Chairman Mr. J C Jain in the presence of Research and Development Cell HOD Respected Dr.
Siddharth Jain and the college staff, gave green signal to the bus which went from college to
Haridwar and the fuel used in the bus was B10 biodiesel. The research was reported by many
international journal of repute and many national newspapers as well including Times of India.
College Bus Run on Biodiesel
Self Study Report (SSR) Cycle 1, Year: 2020
Tired of cranking that wind-up torch? Perhaps it's time to grow
some algae. Inspired by recent research into harnessing energy
directly from plants, Netherlands-based designer Mike
Thompson has come up with a concept for an algae powered
lamp that runs on only sunlight, water and your breath.
In similar concept to harnessing and justifying the potential of
Algae Lamp a group of student under the guidance of
Professor Dr. Siddharth Jain designed and developed series of
“Algae Lamp” and published various research papers on it.
Water is added through the spout, CO2 is added by breathing
through the handle, sunlight enters from all sides and
everything is in place to harvest energy from the algae.
The energy yield to surface area ratio is currently equivalent
to around a sixth of some silicon solar cells, so by the time
it's cost efficient to produce the number of tiny electrodes
necessary for this device, advances in technology might
allow it to compete in terms of energy efficiency as well. But
don't hold your breath - it seems that the designer himself
doesn't predict this product will come into being until around
2035.
Algae Lamp
Self Study Report (SSR) Cycle 1, Year: 2020
Some Innovative Projects of DIY Lab
Currently, Horizontal Axis Wind Turbines (HAWT)
dominates the wind energy market due to their large
size and high power generation characteristics.
However, Vertical Axis Wind Turbines (VAWT) are
capable of producing a lot of power, and offer many
advantages such as they are small, quiet, easy to
install, can take wind from any direction, and operate
efficiently in turbulent wind conditions, a new area in
wind turbine research has opened up to meet the
demands of individuals willing to take control and
invest in small wind energy technology.
This project is about designing and manufacturing a
Wind Turbine that can convert wind by using Vertical
Axis Wind Turbines (VAWT) to a useful energy. The
current power demanding in India is very high
compared to power consumption world average,
Indians consumes 4th
highest electricity in the world.
This high demanding should take the focus of
attention in thinking in different sources of energy.
Vertical Axis Wind Turbines
Self Study Report (SSR) Cycle 1, Year: 2020
ELECTRICITY GENERATION WITH ELECTROMAGNETIC BREAKING SYSTEM
With them “Energy Conservation and Optimization” a project on replacing conventional braking
systems is developed by Mechanical final year students.
This project try to replace involves conventional braking systems having hydraulic assembly
operated by electronic components.Need for better fuel economy, ease of vehicle
manoeuvrability and improved safety systems require new brake technologies.
The Electro-Mechanical Braking system processing components requires high reliability
electronic components, which provides shorter stopping distances and optimized stability with
more comfort and safety due to adjustable pedals and having no pedal vibration in ABS mode.
EMB are also virtually silent, environmentally friendly with no brake fluid.
The Electro-Mechanical Braking system having so many applications likerailway system, road
vehicles, aircraftsand in crane control system etc.
Self Study Report (SSR) Cycle 1, Year: 2020
SEWAGE TREATMENT PLANT
A demonstrated model of Sewage treatment plant is prepared by Civil first year students, which
shows removing contaminants from municipal wastewater, containing mainly
household sewage plus some industrial wastewater. Physical, chemical and biological processes
are used to remove contaminants and produce treated wastewater (or treated effluent) that is safe
enough for release into the environment. A by-product of sewage treatment is a semi-solid waste
or slurry, called sewage sludge. The sludge has to undergo further treatment before being
suitable for disposal or application to land.
Self Study Report (SSR) Cycle 1, Year: 2020
COLLEGE PROTOTYPE
A prototype is used to test different working aspects of a product before the design is finalized.
Once a successful prototype has been developed, the engineering team can use it as a mock-up
for full-scale manufacturing.
Normally, academic applications of computer-aided design in construction provide a visual
presentation of the final state of the project and they are not able to produce changes in the
geometry following the construction process. It was developed a didactic prototype that allows
physical changes in a building component.
This prototype illustrates the construction of a common external wall. First, a 3D geometric
model composed with the several elements needed to construct it was defined and, then, virtual
reality capacities were applied over it. The virtual model allows students to interact with it
visualising the sequence of the construction process, accessing to quantitative and qualitative
information of each construction stage, observing the configuration details of the building
components and how they connect together. The didactic application contributes to support
disciplines concerning with Civil Engineering.
The COER campus is meticulously constructed. The infrastructure and the academicians are
providing the best of inputs for education and extra-curricular activities. The campus is perfectly
built up with various sections including fully facilitated class-rooms, Laboratories, Computer
Centre, Library, Hostels, Auditorium, and Student Centre as well as Sports Complex so that it
gives lot of information about civil projects.
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Patents Filed By Faculties
S.no. Name of the Patent published/awarded Patent Number Year of Award
1 A method for production of fragrant
compounds from Aquilaria malaccensis cell cultures.
Application No. 1277/KOL/2014
2015
Self Study Report (SSR) Cycle 1, Year: 2020
2 A method for production of fragrant
compounds from resinous chips of Aquilaria malaccensis by fermentation.
Application No. 201633016084A
2016
4 Method of determination of composition of Trixylenyl phosphate ester based fire
resistant fluid (FRF) by NMR spectroscopy Patent. No. 262034 2014
5 Development of a novel test methodology for assessment of
impregnability of impregnation epoxy resin used for Global Generators
Application. No. 1124/KOL/2011
2011
6 Epoxy adhesive formulation suitable for In-situ bonding of end packets of stator
core for a large size Turbo Generator Patent No. 317870 2019
MANTHAN Tech Fest 2019
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020
Self Study Report (SSR) Cycle 1, Year: 2020