accendo voltage optimisers

The simple solution to reduce your energy

consumption and your carbon footprint

Why do I need a voltage optimiser?

In the UK and Europe, most electrical items are rated for use at 230V.

However electricity supplied into the household and workplace is generally much higher.

This is simply wasted energy that we do not need.

In many cases running electrical goods above the designed voltage will not only

increase energy consumption but could also shorten their operational life.

Good for the environment

Installing a voltage optimiser and using less power will help reduce your carbon footprint and

help protect the environment.

How does an accendo voltage optimiser work?

By reducing the supplied voltage down towards the

designed 230V energy savings of up to 14% can be

achieved.

Reducing the voltage will also protect electrical

equipment from premature failure caused by

over heating

Accendo voltage optimisers are a simple fit and forget

energy saving solution, saving energy without the need

for a change of lifestyle. Simply installed between the

suppliers incoming mains and your fuse board, giving

potential energy savings 24 hours a day.

Voltage Optimisers and Solar PV

Solar PV systems have to increase the supplied voltage to enable them to export their generated electricity back onto the National Grid. Therefore inevitably the voltage into your property will rise even further.

Installing a voltage optimiser alongside your PV system prevents this precious generated energy from being wasted due to inefficiencies caused by over voltage at appliances. Potentially leaving more of the “Free energy” available for use around the property helping to speed up the return on investment.

With an accendo B60 PVM unit working day and night you will use less power even when the sun isn't shinning, and installed with a PV system could reduce your payback by 3 years putting you in profit far sooner!

If you like the idea of Solar PV, you'll love it with the accendo B60 PVM

Typical Voltage Optimisers Installation

Accendo voltage optimisers simply connect between your suppliers fuses and your distribution board and installed by a qualified tradesman should take around an hour to install.

Once installed the units does not require any set up or commissioning, simply switch on and start saving energy straight away!

Standard Installation B 600 PVM Installation with solar PV

Unit 1c Neander

Lichfield Road Industrial Estate

Tamworth Staffordshire B79 7XA.

T: 01827 61231

E: info@matt-e.co.uk

W: www.accendovoltageoptimiser.co.uk

W: www.matt-e.co.uk

Key product features and specifications

Fully rated Toroidal type transformers manufactured by matt:e Ltd.

Light weight and compact with simple wire in wire out connection allows for ease of installation.

Product range from 60 amp and 100 amp single phase

• Over temperature protection

• Under voltage protection

(intelligent units only)

Direct PV connection

(PV connect units only)

• Reduces energy consumption up to 14%

Reduces carbon emissions up to 14%

5 year product warranty

Designed and Built solely in the UK

Designed and Manufactured

please get in touch for further information on how an accendo

voltage optimiser can start saving you energy today and for many

years to come

Food for thought...

a quote from the electrical guide to the 17th edition of the IEE Wiring Regulations (BS 7671):

2008 and Part P of the Building Regulations by John Whitfield.

“Since the present supply voltages in the UK lie within the acceptable spread of values,

supply companies in the UK have not reduced their voltages from 240V.

This is hardly surprising, because such action would immediately reduce the energy use

by customers (and the income of the Companies) by more than 8%”