about kval machinery
TRANSCRIPT
About KVAL Machinery KVAL was started in the mid 1940’s by AA Kvalheim. A Norwegian trained furniture maker, who turned to cabinetmaking and carpentry, and eventually machinery manufacturing after immigrating to the United States. One prod-uct produced in the mid 40’s was a panel saw which helped expand the fledgling flush door industry that was developing around the Walled Lake, Michigan area. Early door sizing systems were supplied to companies like Young Door, Walled Lake, Arrow Door, and out on the west coast to Cal Wood Door. In the mid 1950’s, sons Andy and Irv Kvalheim joined in the business. As the company grew, so did the line of products. Door pre-hanging equipment was designed for distributors and high production equipment was designed for manufacturers producing pre-fit units. During the growth years of the 60’s, the company continued as an innovator in the industry with automatic machines for jamb processing, casing trimmers and updated door siz-ers. As the 70’s began, customers began demanding even more automa-tion to cut labor costs and improve product quality. Kval responded with bi-fold door assembly and pre-hanging machines featuring fully automatic screw driving systems. Today, Jerry, David, and Mark Kvalheim…the three grandsons of AA Kval-heim have joined the firm. The company family has also grown to include George Kameoka as head engineer, and Mark Smith as one of the manag-ing partners. KVAL products have continued to evolve and are now faster than ever, but are easier to set up, and produce higher quality doors than ever be-fore. Recent technical innovations include CNC controls and the complete replacement of air logic control systems with solid state programmable con-trollers. Fully automatic positioning and sequencing for door and jamb equipment. Digital readouts with touchscreen controls to guarantee accu-rate setup and operation. When looking for quality door, jamb, casing, and related machines, look to the leader in the industry for over six decades! Look to KVAL!!!
© KVAL Inc. All rights reserved
This document may not be copied, photocopied, reproduced, transmitted, or translated in any form or for any purpose without the express written consent of KVAL Inc.
KVAL Inc. reserved the rights, without notice, to change design and construction of any products.
Price are subject to change without notice. Errors in description, photography, or typographical errors are subject to correction.
Printed in the United States of America
Published on 2/8/2011
Making Quality Door and Jamb Machinery Since 1947
INNOVATION | QUALITY | HONESTY Order Today!
Call 1.800.553.5825
3 Track Your Order Online at STORE.KVALINC.COM
To see our full line of products,
go to kvalinc.com and type in DL-2 Find
DL
-2
DL-2
KVAL's DL-2 Door Light Cut-Out Machine produces rectangular, curved, and multi-light cut-outs in wood or metal doors up to 16 gauge. Face boring is standard with a built-in steel template adjustable for backsets from 2-3/8” to 2-3/4”. The three-speed cutter head is supported by cross- mounted lineal bearing shafts for length and width travel. This design eliminates cut-out templates for rectangular lights since adjustable stops can be locked directly on the shaft to limit cutter head travel. A numeric scale and ratcheting lock handles are provided to make the stops easy to adjust. For curved or multiple light cutouts, plywood templates slide into a holder 1/4" above the door. The same template can be used for 32” or 36” doors. In operation, a door is rolled into the machine from the end until it indexes against a retractable doorstop. The clamp but-ton brings in the adjustable fence to firmly sandwich the door against a fixed rail. With the touch of another button, the cutter head is lowered. The operator begins to manually move the cutter head carriage along the lineal bearing shafts to make the cut. During the cutting operation, the spindle automatically oscillates up and down 3/8” every second to guard against overheating the same part of the cutting tool, thus ensure even tool wear and longer tool life. The pass line height of the DL-2 stands at 33-1/2”. SPECIFICATIONS: Footprint Size: 7'x 10' Crated Dimensions: 115"L x 84"W x 60"H Shipping Weight: 2,000 lbs.
4 KVALINC.COM More Products Online
Making Quality Door and Jamb Machinery Since 1947
INNOVATION | QUALITY | HONESTY Order Today!
Call 1.800.553.5825
DL
-2
Replacement Parts
Chipout,DL-2,Door Cutoff Opt-B KVAL P/N: 37-0B-AAA
Router Bit Carbide Tipped 1/2" Dia. 1/4" Shank 2-1/8" OAL 1/2" CE KVAL P/N: RB080433
Router Bit Carbide Tipped 1/2" Dia. X 1/2" Shank 5" OAL 2-1/4" Carbide Tipped KVAL P/N: RB080880
Router Bit Carbide Tipped 1/2" Dia. 1/2" Shank 5-1/2" OAL 2-1/2" CE KVAL P/N: RB080888
Router Bit Carbide Tipped 1/2" Dia. Stagger Cut 1/2" Shank 5" OAL 2-5/8" CE KVAL P/N: RBST0888D
Router Bit Carbide Tipped 1/2" Dia. Stagger Cut 1/2" Shank 5-1/2" OAL With 2-5/8 Car-bide Length KVAL P/N: RBST0888F-SE1
Twist Drill, 15/16 Dia., 7/16 Thread Screw On, 4" Twist, Brad Point, Carbide Tipped KVAL P/N: TD1564-BPCT7
Twist Drill, 1" Dia., 7/16" Screw On, 4" Twist, Brad Point, Carbide Tipped. KVAL P/N: TD1664-BPCT7
Router Bit, Onsrud 15-53, 1/2" Dia. X 3" Cut Edge Gold-Tin Coating 5-1/2" OAL, Door Lite Bits KVAL P/N: ONS1553G
B3 Collet, 1/2" Round, 7/16-20 Thread, Hardinge KVAL P/N: HARB3
Router Bit, Onsrud 26721, 1/2” Dia., 3 Cutting Edge Hollow Metal, 5-1/2" OAL Tin Coated Special Hollow Metal Bit. KVAL P/N: ONS26721G
Router Bit CT 1/2" Dia. 1/2" Shank 5-1/2". 2-1/2" Cutting Edge, Solid Carbide Two Flute Compres-sion Spiral. Door light Cutout Bit. KVAL P/N: RB-8311
Collet, 1/2" FRL90, 7.5-HP Perske Motor. KVAL P/N: PERFRL90B
Router Bit,1/2" Dia., 1/2" Shank,5-1/2" OAL,3" CL Compression KVAL P/N: RB0808550-K
Collet, 1/2" 3/8-24 NF Thread Used with DL2-28CQ Draw Bar KVAL P/N: HARB4
Cover Nut, FRL 90 M48 X 2 RH, 7.5 HP Per-ske Motor. KVAL P/N: PERFRL90N
DL-2, Frame, Template Pin Kit, Includes 1/4-20 X 3/4 FH with (Nut C250 "T" Nut) and Template Pin KVAL P/N: 37-00-UPK5
Cylinder, Advance, Style #3, 300 X 1 KVAL P/N: ADV300A37
Spare
Spare
Spare
Spare
Spare
Spare
5 Track Your Order Online at STORE.KVALINC.COM
To see our full line of products,
go to kvalinc.com and type in DL-2 Find
DL
-2
Spare Parts
Sprocket,40G16 Taper Bore Use G Split Bush-ing,#40 Chain,16 Tooth Sprocket KVAL P/N: BRO40G16
Directional Control Valve, Fabco 18 Series, PMD-4,1/8" NPT, 4-WAY, Detented (Push-Pull), Panel Mount Button KVAL P/N: FAB18PMD4
Valve, Fabco, 3-Way Single 18 PMS-3 1/8. KVAL P/N: FAB18PMS3
Valve, Fabco, 1800 PMS-4 1/8, 4 Way Single 18 Series Palm Button Actuated KVAL P/N: FAB18PMS4
Hairline Pointer, Plastic KVAL P/N: HLPOINTR1
Cylinder, Fabco Pancake C-221-X 3/4 Stroke, 1-5/8 Bore KVAL P/N: FABC221X
Cylinder, Stroke Pancake G-221-X 3 Cylinder, Bore Fabco 1-5/8 KVAL P/N: FABG221X
Cylinder, Fabco Pancake, Hardware, RC-38, Rod Clevis For 221 Series KVAL P/N: FABRC38
Cylinder, Stroke Pancake X-121-X 3/4 1-1/8 Bore Fabco. KVAL P/N: FABX121X
Cylinder, Fabco, Hardware, 221-1D, Pivot Mount For 221 Series KVAL P/N: FAB2211D
Bearing, Pillow Block, PB 250 X 1, Setscrew Locking Relube. KVAL P/N: HUBPB2503
Safety Exhaust Ball Valves, 1/2" NPT KVAL P/N: BBVALVE08
Cylinder, Bimba 123D 3" Double Acting Front Nose Mount 1-1/4 Bore. KVAL P/N: BIM123D
Cylinder, Bimba, Hardware, 120,170 Foot Bracket .75 Bore 2.50 Long Slotted Base KVAL P/N: BIMD241
Cylinder, Bimba Hydraulic H176DUZ 6" Stroke with Poly Pack Seals Double Acting 1-1/2" Bore KVAL P/N: BIMH78129-A-6
Shuttle Valve, 1/8", SV10B, NPT KVAL P/N: DELSV10B
Coupler, 1" Dia. Bore Sleeve 3" Long with Keyseat, CS 16 K KVAL P/N: BROCS16K
Air Piloted Valve, Humphrey 125A-3-11-20 Normally Open, 1/8" (3.2mm) Orifice, 3-Way Pilot KVAL P/N: HUM125A02
6 KVALINC.COM More Products Online
Making Quality Door and Jamb Machinery Since 1947
INNOVATION | QUALITY | HONESTY Order Today!
Call 1.800.553.5825
DL
-2
Replacement Parts | Main Frame
Air Piloted Valve, Humphrey 250A-3-10-20, Normally Closed 1/4" (6.4mm), 3-Way Pilot KVAL P/N: HUM250A01
Valve, Humphrey, Operator Fingertip, 1/4 Min 3/8 Max Movement KVAL P/N: HUM34T
Valve, Humphrey, 3P Spring Return Normally Closed. KVAL P/N: HUM3P
Valve, Humphrey, 4-Way Normally Closed/ Normally Open 5-Port, Spring Return. KVAL P/N: HUM41P
Valve, Humphrey, 4-Way Toggle 3-Position, Detented Valve. KVAL P/N: HUM41TD3
Valve, Humphrey, TAC Valve, Hardware, 8-600 Angle Bracket Single KVAL P/N: HUM8600
Valve, Humphrey, Fitting, 10-32" Barbed to 1/4" ID Hose KVAL P/N: HUMBF1
Valve, Humphrey, Fitting, Elbow 10-32 1 Male - 2 Female KVAL P/N: HUMUEF
Bearing, 1-1/2" Open Super Linear Pillow Block,KGXO-24PP KVAL P/N: INASPB240
Template Spring Plunger Fully Retractable L Shaped 1/4-20 Thread (FR-250P) KVAL P/N: MC3403A71
Handle, Kip 1/2-13 Thread, 1.77 Long, Adjust-able KVAL P/N: KIP38455
Chain, Connecting link, 40 Chain KVAL P/N: LIN400001
Chain, Offset Link, 40 Chain KVAL P/N: LIN400002
Wheel, 3" Dia. X 1-1/4" Wide 3/8" ID Wheel With Simi Precision Roller Bearing KVAL P/N: INDXS0303106
Pad, Delrin 1-1/2" Dia. X 1/2" 7/16 NF Thread KVAL P/N: P240807FD
Pad, Delrin 1-1/2" Dia. X 5/8", 7/16 NF Thread KVAL P/N: P241007FD
DL-2, Frame, Template Pin Kit, Includes 1/4-20 X 3/4 FH with (Nut C250 "T" Nut) and Template Pin KVAL P/N: P633006-N
Regulator, 1/2" Ports with built in 150 PSI Gauge KVAL P/N: REGG08
Spare
7 Track Your Order Online at STORE.KVALINC.COM
To see our full line of products,
go to kvalinc.com and type in DL-2 Find
DL
-2
Spare Parts
Filter, 1/2" With Auto Drain KVAL P/N: SMC40004F
Valve, SMC 4-Way Double Pilot Without Base, NVSA4214-00O KVAL P/N: SMCNVSA04
Tape 12' Stick-Down 1/2 Wide Reads L-R KVAL P/N: TAPE12RI
Tape 12' Stick-Down 1/2 Wide Reads R-L KVAL P/N: TAPE12LI
Air Motor, 4Z231, 56C Face Flange Mount KVAL P/N: DAY4Z231F
Knob, DK-6, Fluted, 2-3/8" Dia. Knob, 3/8-16 Threaded, 2" Long Stud KVAL P/N: REIDK06
Split Collar, One Piece, 1" Dia., Steel KVAL P/N: SC116F
Regulator, 1/4" Mini With Check Valve (1/8" Body with 1/4" Ports) KVAL P/N: SMC20001R
Regulator, Bracket, 1/4" Mini KVAL P/N: SMC20001Y
Pressure Gauge, SMC, K40, 1/8 NPT Thread, 160 PSI KVAL P/N: SMCK10
Speed Controller, Standard, 1/8" Right Angle, 1/8 NPT, Metal Body Elbow Style KVAL P/N: SMCAS2101
8 KVALINC.COM More Products Online
Making Quality Door and Jamb Machinery Since 1947
INNOVATION | QUALITY | HONESTY Order Today!
Call 1.800.553.5825
DL
-2
Replacement Parts | Head
DL-2, Draw Bar 7/16-20 Thread, 7/16 Dia. Shaft Complete Assy (Draw Bar With Hex Roll Pins and Washer). KVAL P/N: 37-00-28
DL-2,Modified Set Screw, 10-32 X 1/2", Old P/N: DL2-27A04, Used on short nose spindle KVAL P/N: 37-00-4A
DL-2,Modified Set Screw, 10-32 X 3/8", Old P/N: DL2-27A04, Used on short nose spindle KVAL P/N: 37-00-4B
DL-2, Head, Arbor Shaft, 1144 Stress proof, 1 1/2" Dia. X 17 3/16. KVAL P/N: 37-00-CM
DL-2, Head, Arbor Shaft With Extended Nose, 1144 Stress proof, 1 1/2" Dia. X 17 3/16 KVAL P/N: 37-00-CM1
DL-2, Head, Arbor Template Follower KVAL P/N: 37-00-CO
DL-2, Head, 3-Groove Arbor Pulley, 4.1 Dia. X 2 3/16” KVAL P/N: 37-00-DX1
DL-2, Head, 3-Groove Motor Pulley, 5 Dia. X 2 3/16”. KVAL P/N: 37-00-DY1
DL-2,Arbor Rebuild Kit, Arbor Shaft With Extended Nose KVAL P/N: 37-00-UPK40
Cylinder, Bimba, Hardware, 500 Series, Mounting Nut 1-3/8-12 NF KVAL P/N: BIMD2540
Handle Bar Grips, Black, 5" Long KVAL P/N: BIKEGRIPS
Cylinder, Bimba 501D 1" Double Acting Front Nose Mount 2-1/2 Bore KVAL P/N: BIM501D
Cylinder, Bimba Hydraulic H314DBZ 4" Dou-ble Acting Front Block Mount, 2" Bore KVAL P/N: BIMH314DB
Motor, 3-HP, 3450 RPM, 145T Frame, 208/230-460V, 60 Hz KVAL P/N: BAL35A001T886H2
V-Belt 41.73 Long 7/16 Wide Rib Top Poly-flex KVAL P/N: BLT11M1060
V-Belt,31.50 Long,7/16 Wide Ribbed Top Polyflex, Tool Drive Motor Belt KVAL P/N: BLT11M800
DL-2, Belt Tension Screw With Knob & Pad, 3/8-16NC X 12 Lg KVAL P/N: DL2003BO1
Arbor Pulley (Ver 1991) DL-2 Cutter Head Assy 20-24 Gauge Doors.(3.900/2.000 OD X 1ID) KVAL P/N: DL2-26DX
Spare
Spare
PRE 1991
9 Track Your Order Online at STORE.KVALINC.COM
To see our full line of products,
go to kvalinc.com and type in DL-2 Find
DL
-2
Spare Parts
DL-2, Head, Arbor Assembly with SMC mist oiler modification Series 1995 Extended Nose ( Through Mounting Holes) KVAL P/N: DL2-ABORAM1A
Cylinder, Fabco, Stack Assembly, DL-2 Cutterhead Post 1996, (1) A721 5/16" Stroke & (1) 721-5 5" Stroke With Brass Guide & Flow Controls KVAL P/N: FAB-A007A
Cylinder, Fabco Pancake Modified A-721-X to 5/16 Stroke, 3 Bore. Use (2) TRC-1220. KVAL P/N: FABA721XM
Pulley, DL-2 Motor Cutter Head Assy KVAL P/N: DL2301.D26
DL-2, Draw Bar 3/8 Thread. 7/16 Dia. Shaft. 16-5/8” OAL KVAL P/N: DL2-28CQ
Hardened Washer 5/8”-ID X 1”-OD X 1/16” KVAL P/N: DL2-28CQW
DL-2, Head, Arbor Assembly with SMC mist oiler modification Series 1995 Extended Nose ( Taped Base) KVAL P/N: DL2-ABORAM1
Directional Control Valve, Fabco 18 Series, PMD-4,1/8" NPT, 4-WAY, Detented (Push-Pull), Panel Mount Button KVAL P/N: FAB18PMD4
Directional Control Valve, Fabco 18 Series, PMD-3, 1/8" NPT, 3-WAY, Detented (Push-Pull), Panel Mount Button KVAL P/N: FAB18PMD3
Pad, Delrin 1" Dia. X 1/2", 3/8" NC Thread, DL-2 Arbor Drive Belt Tensioner KVAL P/N: P160806CD
Shaft Collar, One Piece, 3/4" Dia., Steel KVAL P/N: SC012F
Regulator, 1/4" Mini With Check Valve (1/8" Body with 1/4" Ports) KVAL P/N: SMC20001R
Valve, Humphrey, 3-Way Normally Closed Toggle (DL-2). KVAL P/N: HUM31V
Bearing, 1-1/2" Open Super Linear Pillow Block, KGXO-24PP KVAL P/N: INASPB240
Fastener, N06 Locknut for 1.173 Shaft, 18 Int. Threads Per Inch. KVAL P/N: LOKNUT06
Fastener,W06 Lockwasher for N06 Bearing Locknut KVAL P/N: LOKWSHR06
Knob, DK-85, 4-Prong, 1/4-20, 1-1/4 Dia. 1 Long. KVAL P/N: REIDK85
Reservoir Hydraulic, Monnier, 2-1000 KVAL P/N: MON21000
10 KVALINC.COM More Products Online
Making Quality Door and Jamb Machinery Since 1947
INNOVATION | QUALITY | HONESTY Order Today!
Call 1.800.553.5825
DL
-2
Replacement Parts | Head
Speed Controller, Standard, 1/8" Right Angle, 1/8 NPT, Metal Body Elbow Style KVAL P/N: SMCAS2101
Speed Controller, Standard, 1/4" Right Angle, 1/4 NPT, Metal Body Elbow Style KVAL P/N: SMCAS2102
Pressure Gauge, SMC, K40, 1/8 NT Thread, 30 PSI, K40-MPO.2-N01MS KVAL P/N: SMCK20
Spring,1/4" OD X 3/16" ID X 5" Long,.032 Wire With looped ends
Spring,1/2" OD X 3/8" ID X 3" Long,.0475 Wire With Coiled Ends KVAL P/N: 160300C
DL-2, Main, Lock Bore Template Holder, CRS, 3/8 X 5 X 6-1/4 KVAL P/N: 37-00-EE
DL-2, Main, Lock Bore Template Insert, CRS, 3/8 X 4 X 3 15/16 KVAL P/N: 37-00-EF
Mfg, DL-2, Template, 1-5/8” Lockbore Insert Ring KVAL P/N: 37-00-EFA
Cylinder, Bimba 121 1" Single Acting Front Nose Mount 1-1/4 Bore. KVAL P/N: BIM121
Heavy-Duty 1/2" (13mm) Joist & Stud Drill, DEW124, Modified Right Angle KVAL P/N: DEW124M
Cylinder, Bimba, Hardware, 120,170 Foot Bracket .75 Bore 2.50 Long Slotted Base KVAL P/N: BIMD241
Mfg, DL-2, Template, 1-3/4” Lockbore Insert Ring KVAL P/N: DL2-12AW5
Cylinder, Fabco Pancake C-221-X 3/4 Stroke, 1-5/8 Bore KVAL P/N: PERER16-1/4"
Wheel, 3" Dia. X 1-1/4" Wide 3/8" ID Wheel With Simi Precision Roller Bearing KVAL P/N: INDXS0303106
Pad, Delrin 1-1/2" Dia. X 1/2" 7/16 NF Thread KVAL P/N: P240807FD
Replacement Parts | Movable Fence
Speed Controller, In-line, 1/8" KVAL P/N: SMCAS2001
Spare
Spare
11 Track Your Order Online at STORE.KVALINC.COM
To see our full line of products,
go to kvalinc.com and type in DL-2 Find
DL
-2
Replacement Parts | Electrical
Relay, Finder, General Purpose Relay, 55.34.8.120.0050, 4PDT, 120 V AC Coil (50/60Hz), 7A, 14 Pin KVAL P/N: 55.34.8.1200050
Chicago Miniature 120V Neon Amber Indica-tor, 6010QM3 KVAL P/N: IDI-6010QM3
Pushbutton Contact Square D 1-NO Green, 9001KA2 KVAL P/N: KA2
END PLATE FOR GROUNDING TERMI-NAL BLOCK ENTRELEC. KVAL P/N: 01036221
Terminal Block, 6mm, 30A, Grey, Screw 30A/600V Max., Accepts 24-10 AWG Wire M4/6, Screw Terminal KVAL P/N: 011511607
GROUNDING TERMINAL BLOCK EN-TRELEC.GREENN/YELLOW, 24-10AWG, 6mm KVAL P/N: 016580901
TERMINAL END SECTION ENTRELEC KVAL P/N: 11836816
Carlo Contactor 18A
KVAL P/N: CGC-18A-120
Finder Relay Socket 94.04 KVAL P/N: 94.04
Pushbutton Illuminated, Maintained (Push/Pull), 2 Position, Green Button, 1 N.C. Con-tact, Type: K, Size: 30mm, 10A, Square D KVAL P/N: KR9P1GH14
Disconnect 6mm Shaft, 290mm long, OXP 6X290 KVAL P/N: OXP6X290
Pistol Handle, Red/ Black, Nema 1, 3R, 12 Accepts 6mm SQ Shaft, 65mm Handle Pad-lockable KVAL P/N: OHB65J6
Pushbutton Contact Square D 1-NC Red, 600VAC 10A 30MM KVAL P/N: KA3
Pushbutton Operator Momentary, Non-Illuminated, Type: K, Size: 30mm KVAL P/N: KR1U
Pushbutton Non-Illuminated, Momentary, Green Button, 1 N.O Contact, Type: K, Size: 30mm, 10A, 600V, Square D
Pushbutton Non-Illuminated, Momentary, Red Button,1 N.C. Contact, Type: K, Size: 30mm, 10A, 600V, Square D KVAL P/N: KR24RH6
Limit Switch Arm Adjustable Radius Up to 3-1/2 Radius 3/4" Wheel 1-3/10 Wide KVAL P/N: LSZ52E
Selector Switch Operator Maintained, 3 Posi-tion, Non-Illuminated, Type: K, Size: 30mm, Square D KVAL P/N: KS42
12 KVALINC.COM More Products Online
Making Quality Door and Jamb Machinery Since 1947
INNOVATION | QUALITY | HONESTY Order Today!
Call 1.800.553.5825
DL
-2
Replacement Parts | Electrical
Disconnect Switch, 80 Amp, 3 Poles, ABB, OT80F3,1SCA105798R1001 KVAL P/N: OT80F3
Disconnect, Neutral For OT63E3 KVAL P/N: OTPN63EP
DL-2, Face Plate Router Upgrade, Porter Cable Router Model 7310, 5.6 amps Single Phase, 30,000 RPM. Includes Motor, Modified Base and Mounting Plate. KVAL P/N: 37-00-UPK26
DL-2,Dust Collection Assembly, Includes Hood With (1) 5” Outlet. Unit includes Brushes, rear spacer, Modified Front Belt Guard & Longer Belt KVAL P/N: 37-00-UPK19
Label, Warning, Avoid Injury, Do Not Operate Machine Without All Guards in Place. KVAL P/N: LABELKVAL43L
Label, Danger This Machine ...Disconnect All Power ... KVAL P/N: LABELQS3198
Label, Danger, Read and Understand Instruc-tion Manual, Label For All KVAL Machines. KVAL P/N: LABELKVAL11
Label, ISO, Electrical Shock KVAL P/N: LABELKVAL48A
Power Pole For OT63E3 KVAL P/N: OTPS63EP
Label, Danger, Moving Parts Can Crush and Cut KVAL P/N: LABELKVAL25J
Label, Warning, Read and Understand Opera-tor's Manual Before Using This Machine. KVAL P/N: LABELKVAL45J
Label, Caution, Eye Protection Required KVAL P/N: LABELKVAL39J
Label, USA Flag KVAL P/N: LABELKVAL49
Upgrades
Safety Labels
13 Track Your Order Online at STORE.KVALINC.COM
To see our full line of products,
go to kvalinc.com and type in DL-2 Find
DL
-2
Safety Labels
Cylinder, Stroke Pancake G-221-X 3 Cylinder, Bore Fabco 1-5/8” KVAL P/N: FABG221X
Linear Bearing Block, With Steel Linear Ball Bearing, 1" Dia., 2 Seals & Zirk Fitting Hole, 2-3/4" Long 2 Square. KVAL P/N: KVALBB16B
Label, Caution, Loud Noise Hazard, Ear Pro-tection Must Be Worn KVAL P/N: LABELKVAL42L
Label, Warning, If You Can Read This Sign a Guard Has Been Removed. Do Not Operate With Guard Remove KVAL P/N: LABELKVAL44L
Cylinder, Bimba 501D 1" Double Acting Front Nose Mount 2-1/2 Bore KVAL P/N: BIM501D
Valve, Fabco, 1800 PMS-4 1/8, 4 Way Single 18 Series Palm Button Actuated KVAL P/N: FAB18PMS4
Heavy-Duty 1/2" (13mm) Joist & Stud Drill, DEW124, Modified Right Angle KVAL P/N: DEW124M
Pump Wrench, 1-1/4 Thin Pattern, 1240 KVAL P/N: WRENCH020
Label, 10 Good Reasons ... Keep Clear of Ma-chine KVAL P/N: LABELQS3241
Label, Notice Shut Off Machine when Unat-tended " 3-1/2 X 5 Vinyl Decal KVAL P/N: LABELQS3028
Cylinder, Bimba, Hardware, 500 Series, Mounting Nut 1-3/8-12 NF KVAL P/N: BIMD2540
Twist Drill, 1" Dia., 7/16" Screw On, 4" Twist, Brad Point, Carbide Tipped. KVAL P/N: TD1664-BPCT7
Speed Controller, Standard, 1/8" Right Angle, 1/8 NPT, Metal Body Elbow Style KVAL P/N: SMCAS2101
Option-A | Thumb Operated Clamping System
Option-C | Heavy-Duty Edge Drill
Spare
14 KVALINC.COM More Products Online
Making Quality Door and Jamb Machinery Since 1947
INNOVATION | QUALITY | HONESTY Order Today!
Call 1.800.553.5825
DL
-2
Option-D | Edge Detailing for Wood Edge Doors
Cylinder, Advance, Style #3, 300 X 1
KVAL P/N: ADV300A37
Cylinder, Bimba Hydraulic H176DUZ 6" Stroke with Poly Pack Seals Double Acting 1-1/2" Bore KVAL P/N: BIMH78129-A-6
Valve, Humphrey, 3P Spring Return Normally Closed KVAL P/N: HUM3P
Router Bit Carbide Tipped 1/2" Dia. 1/4" Shank 2-1/8" OAL 1/2" CE KVAL P/N: RB080433
Clamp, Flat-Tip Bonded Neoprene Cap, EDP, 1/4-20 Thread 1-5/8" OAL, 59803 KVAL P/N: DES202208
Template Spring Plunger Fully Retractable L Shaped 1/4-20 Thread (FR-250P). KVAL P/N: MC3403A71
Valve, Humphrey, Operator Fingertip, 1/4 Min 3/8 Max Movement KVAL P/N: HUM34T
Directional Control Valve, Fabco 18 Series, PMD-3, 1/8" NPT, 3-WAY, Detented(Push-Pull), Panel Mount Button KVAL P/N: FAB18PMD3
Valve, SMC 4-Way Single Pilot With 3/8 Base KVAL P/N: SMCNVSA03A
DL-2, 96" Side Light Fixture KVAL P/N: 37-H1
Air Nozzle, UniJet Blow-off nozzle, 1/8 Male Thread, .023in Slot Width KVAL P/N: SPRAY-125
Option-G | Automatic Blow Off System
Option-H1 | Side Light Fixture
Pad, 60 Duro Green, 3-15/16 X 1-7/8 Molded with Steel Insert. KVAL P/N: P633006-N
Spare
Spare
15 Track Your Order Online at STORE.KVALINC.COM
To see our full line of products,
go to kvalinc.com and type in DL-2 Find
DL
-2
Published on 2/8/2011
Parts Department
Monday thru Thursday 6:00 a.m. to 4:00 p.m. Pacific Time
Friday
6:00 a.m. to 1:00 p.m.
Email: [email protected]