RADIATORS & SPECIALIST

SERVICES

ABERDEEN

ABOUT US Operating since 1871, Richard Irvin & Sons Ltd has had to anticipate and adapt to changes in economies, markets, technologies and customer needs; this is no different today, where understanding and developing our markets and those of our customers is fundamental to our success.

Rebranding our trading name to Richard Irvin Energy Solutions in June 2014 we continue with our evolution.

With an ever present focus on customer needs, service delivery and adding value, Richard Irvin Energy Solutions, through our 2 key Business Units:

Aberdeen Radiators - heat exchanger engineering, servicing, supply and maintenance.

Specialist services – Ducting Inspection, Cleaning and Dry Ice Technology.

In this fast moving, global economy, it is vital that we remain competitive and we achieve this through a commitment to innovation, creativity, reliability and quality in all that we do whilst maintaining our key values.

HEAT EXCHANGER & COOLING

SPECIALIST Aberdeen Radiators consists of 2 state of the art workshops, designed and custom built fit for purpose.

They house de-greasing and Chemical cleaning tanks, NDT area, Oven for De-bonding and gasket curing, paint bed, over head cranes including 5 point multi crane with segregated area for prevention of Cross contamination of exotic metals.

Our capabilities range from light radiators for Heavy Haulage, Plant and Crane Markets, Onshore Radiators for Buildings and factories to main engine offshore radiators, plate exchangers and coolers in any application.

We carry out survey, test, certification, build, refurbish and supply of any Radiator, Tube & shell cooler or plate exchanger On shore and Offshore.

Having our Fabrication facility housed within the same building we can offer fast completion times with maximum cost efficiencies and quality control to any refurbishment or build project.

Our capabilities and expertise combined with our facility are geared around maximising turn around time and minimising downtime.

SPECALIST BUSINESS SECTOR

Aberdeen Radiators Specialist Services

ABERDEEN RADIATORS HEAT

EXCHANGER SPECIALISTS

Aberdeen Radiators consists of 2 state of the art workshops, designed and custom built fit for purpose.

They house de-greasing and acid dip tanks, NDT area, Oven for De-bonding and gasket curing, paint bed, over head cranes including 5 point multi crane with segregated area for prevention of Cross contamination of exotic metals.

Our capabilities range from light radiators for Heavy Haulage, Plant and Crane Markets, Onshore Radiators for Buildings and factories to main engine offshore radiators, plate exchangers and coolers in any application.

We carry out survey, test, certification, build, refurbish and supply of any Radiator, Tube & shell cooler or plate exchanger On shore and Offshore.

Having our Fabrication facility housed within the same building we can offer fast completion times with maximum cost and quality control to any refurbishment or build project.

Our capabilities and expertise combined with our facility are geared around maximising turn around time and minimising downtime.

Radiators

All types manufactured, repaired, overhauled or

modified to customers’ requirements to meet the

demands of industrial plant and marine users. We also

offer the most advanced radiator designs using plain

or multi-louvered, fins to enhance performance and

solder dipped cores to give longer service life.

Fan Air Coolers

We design, manufacture, overhaul and repair the full

range of coolers for use in steam, hot water and HVAC

in a range of materials from steel, copper, copper

nickel, stainless steel and titanium with a choice of

aluminium or copper fins.

Plate Heat Exchangers

Our purpose built workshop is equipped with the most modern equipment to overhaul any make, model or size of PHE

• Chemical cleaning and degreasing tanks

• NDT inspection bay

• re-gasket Tables and Gasket hanging frames

• De-bonding and curing oven

• Full pressure testing facility

• Certification accredited

We can offer genuine or non-genuine gaskets and also a full design, supply and refurbishment service.

Calorifiers

A full manufacture, re-tube and repair service is offered along with tube bending. Calorifiers are manufactured and re-tubed in a range of materials, from steel through to titanium and with plain or intergron extruded finned tubes. Tubes can be roller expanded, welded or brazed

into position depending on duty.

Shell and tube

can be fully designed and manufactured to ASME standards in the full range of materials from copper nickel to titanium. We can also offer a full repair and certification service along with chemical cleaning and NDT testing.

The range of heat exchangers we supply are from the smallest

hydraulic unit to the larger process heat exchanger for use on and offshore.

Coolers

Depending on duty we can offer a range of air blast coolers for the cooling of oil, air or water. This incorporates the latest design and manufacturing of special elfin blocks for charge air coolers to the highly efficient aluminium film block. We also offer a new design of cooler using removable tubes and grommets which eliminate the problems of thermal expansion and vibration whilst also allowing for easier maintenance.

HVAC SYSTEM INSPECTION & CLEANING

Having visibility of contamination and general condition is the first step to maintaining compliance, cleanliness, efficiency and duty of care towards health and best practice, but its what you cant see that always causes the problem.

Through our knowledge of HVAC and LEV systems both On and Off shore we identified industry needed not just another cleaning system but a system that produces Video evidence for records, facilitating good maintenance practice and compliance whilst reducing fire risk and adding comfort to the personnel within a facility but also cleans to the highest standard.

Our Brush cleaning and dry ice blasting technologies can clean the dirtiest, grease laden ducting or galleys in any environment with minimum down time and virtually no mess and no high volume liquid waste.

We cover 99% of sizes and shapes of ducting designs requiring cleaning.

INSPECTION

The inspection equipment is your eye to see the problems and the guarantee of best

practice.

Identifying the condition

• Informed decisions.

• Adhere to compliance

• Eliminate health risk.

• Fire prevention.

• Contamination prevention.

• Preventative maintenance.

•Two way camera colour front and B/W rear

•Remote control from control box by Joy stick

•Up to 30m reach inside duct system

•Pictures can be recorded for evidence

•Can be watched in operation

EQUIPMENT FOR ALL APPLICATION

The Power Drill

• Handy tool for small ducts

• Easy Connection

• Easy to Clean

• Easy to move to next stage

• Flexible shaft up to 7.5 meters

• Soft Brushes

• High Speed

• Can pass 90º bends

The Duct Cleaner

• Used for larger and longer ducts

• Can clean both round and square ducts

• Flexible shaft up to 30 meters

• High speed (max 1400 rpm) will centre the shaft in the duct.

• Special designed brushes for square ducts

• Reversing system to clean both left and right side of the duct.

The Air Nozzle

• The perfect way to clean flexible and insulated ducts

• Easy cleaning by compressed air

• Built in camera to see where you are and what has been cleaned

• Can clean in small ducts from 43mm

• Self propelled even to fly vertical

• Can be used for inspection and can be shaft mounted

Ventilators and Filters

• Reusable and easy to clean

• High efficiency to maximise the

negative air flow

• More size of ventilators to suit your requirements

• Dust filter bag, HEPA filter/double HEPA filter

• Rotoclean to minimise down time

• Portable ventilators makes it easy to get around on site

ROBOTIC SOLUTIONS

The MPR

• Fully Automated Cleaning

• A cleaning you can see.

• Evidence recorded

• Compliance guarantee

• No added waste stream

•Two way camera colour monitor with video recorder

•The fastest and most effective way to clean ducts

•Cleans both round and square ducts from 150mm to 1.2 meter

•Tools for coating and disinfecting

•Dry ice attachment.

Constantly searching to bring innovative products and technologies that add value to the duct & specialist machinery cleaning process whilst maintaining cleanliness, efficiency and compliance.

DEEP CLEANING

Where man access is just not

Possible or safe.

Where the use of chemical is

Not an option.

Where no added waste is critical.

Eliminates need for multi hatch

cutting.

FURTHER USES FOR DRY ICE

TECHNOLOGY

Specialist cleaning technology was required by our client base where had supplied and installed galleys and ducting.

The challenge was to offer something different that challenged traditional methods where chemical and waste generation combined with lengthy time scales is notoriously inconvenient and expensive.

Dry Ice cleaning will remove 99% of contaminants without damaging the original surface or equipment.

• Kitchen galleys and hoods

• Internal galley ducting

• Electrical switchgear and boxes.

• Motors, impellors, fans and controls.

• Highly sensitive areas where waste or further contaminant cannot be added

• Quayside Drilling Rigs

• Marine Vessels (PSV/DSV)

• Refineries

• Petrochemical Plants

• Nuclear

• Food

• Distillery

• Paper mill

• Specialist components

• Kitchen Galleys and associated ducting

FEATURES & BENEFITS

The Advantages of Cleaning With Dry Ice Blasting

Cleans without surface erosion and etching caused by typical abrasive blasting methods, bead, sand or grit

• Dry Ice Blasting can create dramatic savings in man hours and hazardous chemicals

• Eliminates potential damage to machine parts and tooling being cleaned

• Eliminates secondary waste streams

• Eliminates personnel exposure to the corrosive / conductive characteristics of manual cleaning products

• Reduces cleaning and downtime by cleaning in-situ with or without minimal disassembling

• Eliminates blasting media entrapment and drying time.

• Eliminates electrical and bacterial problems associated with water cleaning

• Reduces overall cleaning time ****increases productivity****

Portable to operate where you need us

SUMMARY What we offer

• Radiator repair and testing

• Plate Exchanger Repair and testing

• Tube and shell cooler repair and testing

• HVAC Inspection and cleaning

• Dry Ice blasting technology

Key Differentiators

• Specialist Fabrication (stainless Steel)

• Extensive Heat exchanger experience

(Aberdeen Radiators)

• Specifically designed full in house Plate exchanger workshop

• HVAC ducting fabrication specialists

• HVAC robotic cleaning with no need for man entry

• Galley and ducting dry ice blasting with no added waste stream

• Dry Ice cleaning for factories and all applications where hygiene and no added waste are critical

• Workshops local in Aberdeen

• Portable systems with minimum foot print, operate where we are needed

ENVIRONMENTALY SAFE< NO ADDED WASTE STREAM